On 09.11.2010 22:57, Stefan Reinauer wrote:
- Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net [101109 21:41]:
Support Dediprog SF100 bulk read.
Packet size is 512 bytes. Depending on your USB hardware and the Dediprog firmware version, this may not work at all. Untested, experimental, may hang/crash the programmer.
Read tests of random images are appreciated.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Acked-by: Stefan Reinauer stepan@coreboot.org
Thanks for the ack. The code is not working yet, so I'm holding off with the commit.
New version follows. While it may still fail, the error messages should be way more useful.
Support Dediprog SF100 bulk read.
Packet size is 512 bytes. Depending on your USB hardware and the Dediprog firmware version, this may not work at all. Add lots of error checking where it was missing before. Untested, experimental, may hang/crash the programmer.
Read tests of random images are appreciated.
Please note that flashrom needs full access permissions for the USB device.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-dediprog_read_bulk/dediprog.c =================================================================== --- flashrom-dediprog_read_bulk/dediprog.c (Revision 1227) +++ flashrom-dediprog_read_bulk/dediprog.c (Arbeitskopie) @@ -27,6 +27,7 @@
#define DEFAULT_TIMEOUT 3000 static usb_dev_handle *dediprog_handle; +static int dediprog_endpoint;
#if 0 /* Might be useful for other pieces of code as well. */ @@ -150,9 +151,43 @@
int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { + int ret; + int i; + int chunksize = 0x200; /* 512 */ + int count = flash->total_size * 1024 / chunksize; + /* Guessed. */ + const char count_and_chunk[] = {(count >> 8) & 0xff, + count & 0xff, + (chunksize >> 8) & 0xff, + chunksize & 0xff}; + msg_pspew("%s, start=0x%x, len=0x%x\n", __func__, start, len); - /* Chosen read length is 16 bytes for now. */ - return spi_read_chunked(flash, buf, start, len, 16); + if ((len != flash->total_size * 1024) || (start != 0)) { + msg_perr("Only a full chip read is supported for now. Wanted " + "start=%i, length=%i\n.", start, len); + return 1; + } + + /* Command Read SPI Bulk. No idea which read command is used on the + * SPI side. + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, 0x0000, 0x0000, (char *)count_and_chunk, sizeof(count_and_chunk), DEFAULT_TIMEOUT); + if (ret != sizeof(count_and_chunk)) { + msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, + usb_strerror()); + return 1; + } + + for (i = 0; i < count; i++) { + ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_endpoint, (char *)buf + i * chunksize, chunksize, DEFAULT_TIMEOUT); + if (ret != chunksize) { + msg_perr("SPI bulk read failed, expected %i, got %i " + "%s!\n", chunksize, ret, usb_strerror()); + return 1; + } + } + + return 0; }
int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -345,6 +380,7 @@ struct usb_device *dev; char *voltage; int millivolt = 3500; + int ret;
msg_pspew("%s\n", __func__);
@@ -371,8 +407,23 @@ dev->descriptor.idVendor, dev->descriptor.idProduct); dediprog_handle = usb_open(dev); - usb_set_configuration(dediprog_handle, 1); - usb_claim_interface(dediprog_handle, 0); + ret = usb_set_configuration(dediprog_handle, 1); + if (ret < 0) { + msg_perr("Could not set USB device configuration: %i %s\n", + ret, usb_strerror()); + if (usb_close(dediprog_handle)) + msg_perr("Could not close USB device!\n"); + return 1; + } + ret = usb_claim_interface(dediprog_handle, 0); + if (ret < 0) { + msg_perr("Could not claim USB device interface %i: %i %s\n", + 0, ret, usb_strerror()); + if (usb_close(dediprog_handle)) + msg_perr("Could not close USB device!\n"); + return 1; + } + dediprog_endpoint = 2; /* URB 6. Command A. */ if (dediprog_command_a()) return 1; @@ -461,8 +512,12 @@ if (dediprog_set_spi_voltage(0x0)) return 1;
+ if (usb_release_interface(dediprog_handle, 0)) { + msg_perr("Could not release USB interface!\n"); + return 1; + } if (usb_close(dediprog_handle)) { - msg_perr("Couldn't close USB device!\n"); + msg_perr("Could not close USB device!\n"); return 1; } return 0;