Author: stefanct Date: Wed Aug 6 16:36:27 2014 New Revision: 1838 URL: http://flashrom.org/trac/flashrom/changeset/1838
Log: Add support for S25FL128P, S25FL129P and refine it for S25FL128S chips.
Additionally to the existing S25FL128S......0 definition this patch adds S25FL128P......0, S25FL128P......1 and S25FL128S......1, as well as S25FL129P......0 and S25FL129P......1 definitions. S25FL12xP seem to be the predecessor families of S25FL128S. All associated chips can not be distinguished with RDID alone.
Besides the new chips, this patch also fixes the name of the previously supported S25FL128S model with uniform 256 kB sectors (S25FL128P......1 not 0) and adds the hybrid sector version (0) as well.
Due to the shared IDs the user has to select the right chip manually with the -c parameter. To make this even possible, this patch enlarges the respective array for results to 6.
Tested-by: Antonio Ospite ao2@ao2.it with a S25FL129P......0.
Signed-off-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at Acked-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at
Modified: trunk/cli_classic.c trunk/flashchips.c trunk/flashchips.h
Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Wed Aug 6 01:28:47 2014 (r1837) +++ trunk/cli_classic.c Wed Aug 6 16:36:27 2014 (r1838) @@ -94,7 +94,7 @@ unsigned long size; /* Probe for up to three flash chips. */ const struct flashchip *chip = NULL; - struct flashctx flashes[3] = {{0}}; + struct flashctx flashes[6] = {{0}}; struct flashctx *fill_flash; const char *name; int namelen, opt, i, j;
Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Aug 6 01:28:47 2014 (r1837) +++ trunk/flashchips.c Wed Aug 6 16:36:27 2014 (r1838) @@ -10389,7 +10389,69 @@
{ .vendor = "Spansion", - .name = "S25FL128S......0", /* uniform 256kB sectors */ + .name = "S25FL128P......0", /* uniform 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128P......1", /* uniform 256kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, @@ -10403,9 +10465,48 @@ .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + /* This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, .block_erase = spi_block_erase_20, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { @@ -10421,6 +10522,86 @@ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does have no + * effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs + .eraseblocks = { + {8 * 1024, 16}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL129P......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, },
{
Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Aug 6 01:28:47 2014 (r1837) +++ trunk/flashchips.h Wed Aug 6 16:36:27 2014 (r1838) @@ -590,7 +590,7 @@ #define SPANSION_S25FL016A 0x0214 #define SPANSION_S25FL032A 0x0215 /* Same as S25FL032P, but the latter supports EDI and CFI */ #define SPANSION_S25FL064A 0x0216 /* Same as S25FL064P, but the latter supports EDI and CFI */ -#define SPANSION_S25FL128 0x2018 +#define SPANSION_S25FL128 0x2018 /* Same ID for various S25FL128P, S25FL128S and S25FL129P (including dual-die S70FL256P) variants (EDI supported) */ #define SPANSION_S25FL256 0x0219 #define SPANSION_S25FL512 0x0220 #define SPANSION_S25FL204 0x4013