Hi Flashrom Team,
The DID 0x4019 which is for WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV or W25Q256JV_Q (QE=1) */ supports W25R256JVEIQ flashpart
I think the issue is with table *chipset_enables *defined inside -> flashrom-master\flashrom-master\Chipset_enable.c is not matching Elkhart Lake PCH ID which is causing
WARNING: No chipset found. Flash detection will most likely fail
Best Regards
Rao
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail Virus-free. www.avg.com http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Tue, Nov 23, 2021 at 11:38 AM Rao G grao.v80@gmail.com wrote:
Hi Flashrom team,
Am trying to flash on W25R256JVEIQ NOR flash
sudo flashrom -p internal -w coreboot_ehl_2609.bin
flash device is not found, hope it means W25R256JVEIQ NOR flash device is not supported by flashrom 1.2?
sudo flashrom -p internal -w coreboot_ehl_2609.bin flashrom v1.2 on Linux 5.13.0-21-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). WARNING: No chipset found. Flash detection will most likely fail. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically
Thanks for your time!
Best Regards Rao