On Thu, 27 Oct 2011 09:17:23 +0200 Piotr Czepek piotr.czepek@gmail.com wrote:
Hello, I tried to re-flash VIA Epia mb with flashrom. Chipset is marked as untested, so I attached report for you.
Just for test - I read flash image to file and I wrote it back. After reboot system is alive, so I think flasrom works fine with this mb ;)
Hello Piotr,
Thanks for your effort! If you look at the end of your write log you will see a lot of address ranges followed by an 'S'. This indicates that flashrom has detected that the current content already matches the data to write and *S*kips that range. Naturally in your case it skips the whole image and hence the log is no proof of erase + write working correctly. If you have means to recover a failed write (or an UPS and some patience) or if you are brave enough you can try to first erase the chip with -E and write the backup image afterwards like you did already. I have no experience with the VIA chips you have, so i can't say if it is fairly safe or not (i guess so). If that would be my productive machine i would not try it... some glitch can always occur...