Здравствуйте, Stefan.
Вы писали 1 февраля 2016 г., 3:23:13:
Hi!
i have ch341a china programmer and tested this feature on W25Q32 chip
./flashrom -p ch341a_spi -r 1 flashrom v0.9.8-r1925 on Linux 3.2.75-imq (i686) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on ch341a_spi. Reading flash... done.
--
./flashrom -p ch341a_spi -E flashrom v0.9.8-r1925 on Linux 3.2.75-imq (i686) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on ch341a_spi. Erasing and writing flash chip... Erase/write done.
---
./flashrom -p ch341a_spi -r 1erase flashrom v0.9.8-r1925 on Linux 3.2.75-imq (i686) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on ch341a_spi. Reading flash... done.
---
./flashrom -p ch341a_spi -w 1 flashrom v0.9.8-r1925 on Linux 3.2.75-imq (i686) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.
--
./flashrom -p ch341a_spi -r 1r flashrom v0.9.8-r1925 on Linux 3.2.75-imq (i686) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on ch341a_spi. Reading flash... done.
---
diff 1 1r
- no diff!
if you want, i may tested other chips?
CH341A programmer support 24C1024 chips and other 24XX chips, but flashrom not support it.
CH341A programmer have other 8 pin in 16 pin panel to support 24CXX chips.
how i can help to support 24CXX chips ?
---
Thank to you for support CH341A programmer in open source!
Hi,
I am writing to you because you were interested in CH341A support in flashrom in the past. I am happy to announce that we have merged the respective patch in r1921 and it should work fine on any operating system that supports libusb1. It will be included in the upcoming 0.9.9 release of flashrom as well.