Are you doing the ISP (In-System Programming) ? Maybe there are problems with the reliability of your flashing setup (i.e. too long wires between a programmer and test clip)
On Thu, May 13, 2021 at 2:39 AM Tim Tech agitimtim@gmail.com wrote:
Are you able to help with the following issue? Thank you
Calibrating delay loop... OK. Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) on ch341a_spi.
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org