Re: [flashrom] [RFC] Output and progress bars

[Stefan Reinauer]

ron minnich wrote:
> one thing to keep in mind: the limiting factor on progress on flashing
> 1024 nodes at a time was the printout of the "current address" being
> flashed. I had to turn that off or a 30-second task could take much,
> much longer.

I want to add to this: We've had cases where printing too much output
would mess with the timing (maximum time allowed until a block has to be
completely written) due to heavy output of "current addresses" over a
serial line. Not only would it take several hours to finish but the
result was a few dozen non-booting systems. Very frustrating.

Stefan