On Sat, 12 Mar 2016 17:31:39 +0000 Adrian Graham witchy@binarydinosaurs.co.uk wrote:
On 12/03/2016 16:27, "Stefan Tauner" stefan.tauner@alumni.tuwien.ac.at wrote:
On Sat, 12 Mar 2016 16:08:54 +0000 Adrian Graham witchy@binarydinosaurs.co.uk wrote:
On 12/03/2016 15:46, "Stefan Tauner" stefan.tauner@alumni.tuwien.ac.at wrote:
Ah, OK. In that case I don't know why it didn't finish writing then, unless my temporary connections between RasPi and flash moved a little bit or just aren't tight enough for a good signal. Cable length maybe - signal path is RasPi -> 40pin IDE cable -> hookup wires (15cm) soldered to the pads on the chip. Now that I've got more female-female jumper wires I can go direct to the Pi to shorten the distance drastically.
That makes a huge difference for the quality of the signals :)
Certainly does - it worked this time with a much shorter signal path! Do you still want a verbose dump of the writing?
Yes, please. I'll just want to make sure that we set the status of the chip correctly and you did not miss anything.
Still stumped on the bootloader though, even a generic tg582n won't boot. Odd.
Probably not flashrom's fault... flashrom does not care about the content of the files you feed it. I fear I can't help with the tg582n/bootloader problem itself, sorry.