On Wed, Oct 28, 2009 at 12:40:18PM +0100, Tor P wrote:
Hi
I saw that someone was asking for support for the k7VT4A+ Since I desperately need support for this board to get my epia board working again here is the F segment from my board
Tor
I did not find a board enable in this AMI BIOS, at least not at int16.
After an exhaustive search i did find the chipset enable, and it was followed by setting CR24.1 of the winbond super to 0. This bit is supposed to be a bootstrap, and read only, but your bios raises and drops it.
I found the chipset enable hook under, i think, the trace is not entirely clear, the following circumstances:
int15, ax=0xEBAC, bx=0xB000 (enable) bx=0xB001 (disable)
I will provide a possible board enable function soon.
Luc Verhaegen.