In addressing Step 1 below, I attempted to get the Flashrom source from http://tracker.coreboot.org/trac/flashrom/browser/trunk but there are many files listed and I'm not sure how to proceed if I was even looking in the right place. So, please let me know if I need all of those files or just flashrom.8 or what. Thanks.
The next steps are what i have described in my previous mail, namely: 1 - getting flashrom to build from source so that you can change it where/when required 2 - applying the patches i mentioned 3 - understanding the layout of the flash regions and the protected address ranges 4 - using the modified version of flashrom and an appropriate layout file (see manpage) to extract the relevant parts from the flash device
-----Original Message----- From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at] Sent: Thursday, January 24, 2013 10:06 PM To: Robert S. Done, Ph.D. Cc: flashrom@flashrom.org Subject: Re: [flashrom] 2009 era -L output
On Sat, 19 Jan 2013 09:19:35 -0700 "Robert S. Done, Ph.D." rdone@cox.net wrote:
Apologies Stefan, attached and below is the -VV output. I do not have an external flash programmer but I am interested in resolving this issue and am willing to invest in figuring it out. Let me know what the -VV output indicates the next steps should be.
The next steps are what i have described in my previous mail, namely: - getting flashrom to build from source so that you can change it where/when required - applying the patches i mentioned - understanding the layout of the flash regions and the protected address ranges - using the modified version of flashrom and an appropriate layout file (see manpage) to extract the relevant parts from the flash device