Re: [flashrom] [PATCH]buspiratespi on mingw

[Carl-Daniel Hailfinger]

On 06.01.2010 21:50, Patrick Georgi wrote:
> attached patch makes the buspiratespi programmer compile and run on
> mingw. Build tested on linux, too.
>
> Tested without any device attached to the buspirate, which gave me much
> text (with -V) ending in:
> Found chip "Generic unknown SPI chip (REMS)" (0 KB, SPI) at physical
> address 0x0.

I'm still a bit surprised that it only found the generic REMS chip, but
not the generic RDID chip. That looks a bit like corruption on the wire
or a floating bus which changes state a lot between commands.
> No operations were specified.
> buspirate_sendrecv: write 1, read 5
> Sending 0x00, receiving 0x42 0x42 0x49 0x4f 0x31
> Raw bitbang mode version 1
> buspirate_sendrecv: write 1, read 0
> Sending 0x0f, receiving
> Bus Pirate shutdown completed.
>
> Signed-off-by: Patrick Georgi

Thanks for adding Windows support!

Acked-by: Carl-Daniel Hailfinger

Regards,
Carl-Daniel