On 12/03/2016 16:27, "Stefan Tauner" stefan.tauner@alumni.tuwien.ac.at wrote:
On Sat, 12 Mar 2016 16:08:54 +0000 Adrian Graham witchy@binarydinosaurs.co.uk wrote:
On 12/03/2016 15:46, "Stefan Tauner" stefan.tauner@alumni.tuwien.ac.at wrote:
Ah, OK. In that case I don't know why it didn't finish writing then, unless my temporary connections between RasPi and flash moved a little bit or just aren't tight enough for a good signal. Cable length maybe - signal path is RasPi -> 40pin IDE cable -> hookup wires (15cm) soldered to the pads on the chip. Now that I've got more female-female jumper wires I can go direct to the Pi to shorten the distance drastically.
That makes a huge difference for the quality of the signals :)
Certainly does - it worked this time with a much shorter signal path! Do you still want a verbose dump of the writing?
Still stumped on the bootloader though, even a generic tg582n won't boot. Odd.