Author: stefanct Date: Fri Jul 26 00:54:25 2013 New Revision: 1702 URL: http://flashrom.org/trac/flashrom/changeset/1702
Log: Add a bunch of new/tested stuff and various small changes 18.
Tested mainboards: OK: - ASUS C60M1-I http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html - ASUS P8H77-I http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - ASUS P8H77-M http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html - ASUS P8P67 LE (B2) http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html - Elitegroup GeForce6100PM-M2 (V3.0) http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html - GIGABYTE GA-P55A-UD7 http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html - MSI B75MA-E33 (MS-7808) http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - MSI H77MA-G43 (MS-7756) http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html - MSI KA780G (MS-7551) http://paste.flashrom.org/view.php?id=1617 - SAPPHIRE IPC-E350M1 Reported by xvilka on IRC - Supermicro X8DTG-D http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html NOT OK: - ASRock Fatal1ty Z77 Performance http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html - ASRock Z68 Extreme4 http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html - ASUS P8B75-M LE http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html - ASUS P8P67-M PRO http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html - ASUS P8Z68-V LE http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html - Intel DQ77MK http://paste.flashrom.org/view.php?id=1603 - Supermicro X9DRD-7LN4F http://paste.flashrom.org/view.php?id=1582 - Supermicro X9SCE-F http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html - Supermicro X9SCM-F http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html - Tyan S7066 http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html
Chipsets: - Marked Intel B75 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html - Marked Intel H77 as tested http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html - Removed 10de:03e2 because it is apparently the MCP61 host bridge. It was reclassified to Host Bridge in the PCI device ID database and there is at least one report suggesting this configuration too: http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html - Added MCP89 which hopefully works with the code for previous versions. Thanks to James Laird for submitting this change.
Tested flash chips: - Atmel AT25DF641(A) to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html - Atmel AT25F512 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html Also, change its ID according to Modification of PCN SC040401A: "There has been a change in the returned value of the Product Identification (RDID) command, the AT25F512A RDID code is 65h compared to 60h from the AT25F512 product." It seems to be quite likely that all AT25F512 are fully functional relabeled AT25F1024 chips. There are even some hints in the datasheet: in table 6 they stress that address pin 16 needs to be low under all circum- stances; while continuous reads can wrap around on the AT25F1024 the DS notes "For the AT25F512, the read command must be terminated when the highest address (00FFFF) is reached." OTOH the lock bit semantics are different, but this has not been tested thoroughly - Atmel AT25F512A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1569 - Eon EN25F05 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1571 - Macronix MX25L12805(D) to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html - Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P) Tested by Stefan Tauner - Micron/Numonyx/ST M25PX80 to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW) Tested by Stefan Tauner - Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P) Tested by Stefan Tauner - SST SST25VF040B to PREW (+PREW) http://paste.flashrom.org/view.php?id=1574 - SST SST25VF040B.REMS to PREW (+EW) http://paste.flashrom.org/view.php?id=1575 - ST M25P05-A to PREW (+PREW) http://paste.flashrom.org/view.php?id=1576 - ST M29W512B to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html - Winbond W25Q64.W to PREW (+PREW) Tested by the chromiumos guys. - Winbond W25Q128.V to PREW (+REW) http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html - Winbond W25X20 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html
Miscellaneous: - Add Lenovo X201 to the laptop whitelist. - Add chip IDs for the ESMT F25L..QA family. - Add chip IDs for a few Macronix MX25 models. - The list of flashchips is not sorted strictly alphabetically and should not be either. Refine the comment explaining the scheme on top of the list. - Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb). - Use z length modifier in (more) prints for size_t types. - Remove chips >16MB again because our current implementation of memory mapping the flash chip violates common rules by mapping a window as large as the chip. This leads to failing mmaps as can be seen here: http://paste.flashrom.org/view.php?id=1695 - Document spispeed parameter of linux_spi (and fix some leaks). - Rephrase the "multiple chips detected" message because it was confusing. - Skip verification step if the image is equal to the flash contents. - Tiny other stuff.
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Most parts are also Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/cli_classic.c trunk/cli_output.c trunk/dummyflasher.c trunk/flash.h trunk/flashchips.c trunk/flashchips.h trunk/flashrom.8 trunk/flashrom.c trunk/hwaccess.h trunk/ich_descriptors.c trunk/jedec.c trunk/linux_spi.c trunk/physmap.c trunk/print.c trunk/serprog.c trunk/spi25_statusreg.c
Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/board_enable.c Fri Jul 26 00:54:25 2013 (r1702) @@ -2415,6 +2415,7 @@ {0x8086, 0x27a0, 0x17aa, 0x2015, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "Lenovo", "T60", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "Lenovo", "T60(s)", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad X60", NULL, NULL, P2, "Lenovo", "X60(s)", 0, OK, p2_whitelist_laptop}, + {0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167, "^Lenovo X201", NULL, NULL, P2, "Lenovo", "X201", 0, OK, p2_whitelist_laptop}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, P3, "Mitac", "6513WU", 0, OK, board_mitac_6513wu}, {0x8086, 0x8186, 0x8086, 0x8186, 0x8086, 0x8800, 0, 0, "^MSC Vertriebs GmbH$", NULL, NULL, P2, "MSC", "Q7-TCTC", 0, OK, p2_not_a_laptop}, {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, P3, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, /* TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. */
Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/chipset_enable.c Fri Jul 26 00:54:25 2013 (r1702) @@ -1366,7 +1366,6 @@ {0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */ {0x10de, 0x03e0, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x03e1, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, - {0x10de, 0x03e2, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x03e3, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x0440, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x}, {0x10de, 0x0441, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x}, @@ -1380,6 +1379,7 @@ {0x10de, 0x0aad, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x}, {0x10de, 0x0aae, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x}, {0x10de, 0x0aaf, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x}, + {0x10de, 0x0d80, NT, "NVIDIA", "MCP89", enable_flash_mcp6x_7x}, /* VIA northbridges */ {0x1106, 0x0585, NT, "VIA", "VT82C585VPX", via_no_byte_merge}, {0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge}, @@ -1428,8 +1428,8 @@ {0x8086, 0x1e46, NT, "Intel", "Z75", enable_flash_pch7}, {0x8086, 0x1e47, NT, "Intel", "Q77", enable_flash_pch7}, {0x8086, 0x1e48, NT, "Intel", "Q75", enable_flash_pch7}, - {0x8086, 0x1e49, NT, "Intel", "B75", enable_flash_pch7}, - {0x8086, 0x1e4a, NT, "Intel", "H77", enable_flash_pch7}, + {0x8086, 0x1e49, OK, "Intel", "B75", enable_flash_pch7}, + {0x8086, 0x1e4a, OK, "Intel", "H77", enable_flash_pch7}, {0x8086, 0x1e53, NT, "Intel", "C216", enable_flash_pch7}, {0x8086, 0x1e55, OK, "Intel", "QM77", enable_flash_pch7}, {0x8086, 0x1e56, NT, "Intel", "QS77", enable_flash_pch7},
Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/cli_classic.c Fri Jul 26 00:54:25 2013 (r1702) @@ -435,10 +435,11 @@ }
if (chipcount > 1) { - msg_cinfo("Multiple flash chips were detected: "%s"", flashes[0].chip->name); + msg_cinfo("Multiple flash chip definitions match the detected chip(s): "%s"", + flashes[0].chip->name); for (i = 1; i < chipcount; i++) msg_cinfo(", "%s"", flashes[i].chip->name); - msg_cinfo("\nPlease specify which chip to use with the -c <chipname> option.\n"); + msg_cinfo("\nPlease specify which chip definition to use with the -c <chipname> option.\n"); ret = 1; goto out_shutdown; } else if (!chipcount) {
Modified: trunk/cli_output.c ============================================================================== --- trunk/cli_output.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/cli_output.c Fri Jul 26 00:54:25 2013 (r1702) @@ -46,7 +46,7 @@ int open_logfile(const char * const filename) { if (!filename) { - msg_gerr("No filename specified.\n"); + msg_gerr("No logfile name specified.\n"); return 1; } if ((logfile = fopen(filename, "w")) == NULL) {
Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/dummyflasher.c Fri Jul 26 00:54:25 2013 (r1702) @@ -414,15 +414,14 @@
void *dummy_map(const char *descr, uintptr_t phys_addr, size_t len) { - msg_pspew("%s: Mapping %s, 0x%lx bytes at 0x%*" PRIxPTR "\n", - __func__, descr, (unsigned long)len, PRIxPTR_WIDTH, phys_addr); + msg_pspew("%s: Mapping %s, 0x%zx bytes at 0x%*" PRIxPTR "\n", + __func__, descr, len, PRIxPTR_WIDTH, phys_addr); return (void *)phys_addr; }
void dummy_unmap(void *virt_addr, size_t len) { - msg_pspew("%s: Unmapping 0x%lx bytes at %p\n", - __func__, (unsigned long)len, virt_addr); + msg_pspew("%s: Unmapping 0x%zx bytes at %p\n", __func__, len, virt_addr); }
static void dummy_chip_writeb(const struct flashctx *flash, uint8_t val, @@ -447,8 +446,7 @@ chipaddr addr, size_t len) { size_t i; - msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%08lx, writing data (hex):", - __func__, addr, (unsigned long)len); + msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%zx, writing data (hex):", __func__, addr, len); for (i = 0; i < len; i++) { if ((i % 16) == 0) msg_pspew("\n"); @@ -480,8 +478,7 @@ static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len) { - msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%lx, returning array of 0xff\n", - __func__, addr, (unsigned long)len); + msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%zx, returning array of 0xff\n", __func__, addr, len); memset(buf, 0xff, len); return; }
Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/flash.h Fri Jul 26 00:54:25 2013 (r1702) @@ -93,6 +93,7 @@ */ #define NUM_ERASEFUNCTIONS 6
+/* Feature bits used for non-SPI only */ #define FEATURE_REGISTERMAP (1 << 0) #define FEATURE_BYTEWRITES (1 << 1) #define FEATURE_LONG_RESET (0 << 4) @@ -104,11 +105,12 @@ #define FEATURE_ADDR_2AA (1 << 2) #define FEATURE_ADDR_AAA (2 << 2) #define FEATURE_ADDR_SHIFTED (1 << 5) +/* Feature bits used for SPI only */ #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) +#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) #define FEATURE_OTP (1 << 8) #define FEATURE_QPI (1 << 9) -#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN)
struct flashctx; typedef int (erasefunc_t)(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/flashchips.c Fri Jul 26 00:54:25 2013 (r1702) @@ -29,8 +29,8 @@ /** * List of supported flash chips. * - * Please keep the list sorted by vendor name and chip name, so that - * the output of 'flashrom -L' is alphabetically sorted. + * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly + * alphabetically sorted. Within families keep them in order of density. */ const struct flashchip flashchips[] = {
@@ -1297,7 +1297,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, @@ -1329,7 +1329,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -1678,7 +1678,7 @@ .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -1755,7 +1755,7 @@ .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = @@ -1784,7 +1784,7 @@ .total_size = 64, .page_size = 128, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2809,7 +2809,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, @@ -3426,7 +3426,7 @@ .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4503,7 +4503,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, @@ -4535,7 +4535,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -4568,7 +4568,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, @@ -4600,7 +4600,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -5375,7 +5375,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {112 * 1024, 1}, @@ -5479,7 +5479,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, @@ -5506,7 +5506,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {128 * 1024, 3}, {96 * 1024, 1}, {8 * 1024, 2}, @@ -5534,7 +5534,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, @@ -5562,7 +5562,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {128 * 1024, 3}, {96 * 1024, 1}, {8 * 1024, 2}, @@ -6263,7 +6263,7 @@ .page_size = 256, /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -6429,7 +6429,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 2}, @@ -6462,7 +6462,7 @@ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 1}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -7360,7 +7360,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -7495,7 +7495,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -7561,7 +7561,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_BAD_REW, + .tested = TEST_OK_PROBE | TEST_BAD_REW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -7621,7 +7621,7 @@
{ .vendor = "Numonyx", - .name = "N25Q512..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ + .name = "N25Q512..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q512__3E, @@ -7630,7 +7630,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_BAD_REW, + .tested = TEST_OK_PROBE | TEST_BAD_REW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -8874,7 +8874,7 @@ /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_BAD_REW, + .tested = TEST_OK_PROBE | TEST_BAD_REW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -8911,7 +8911,7 @@ /* supports SFDP */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_BAD_REW, + .tested = TEST_OK_PROBE | TEST_BAD_REW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -9184,7 +9184,7 @@ .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -9222,7 +9222,7 @@ .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = @@ -9470,7 +9470,7 @@ .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { { @@ -9494,7 +9494,7 @@ .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { { @@ -9542,7 +9542,7 @@ .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { { @@ -9918,7 +9918,7 @@ .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_49lfxxxc, }, { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -9983,7 +9983,7 @@ .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_49lfxxxc, }, { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -10016,7 +10016,7 @@ .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -10163,7 +10163,7 @@ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_FIXME, .block_erasers = { { @@ -10200,7 +10200,7 @@ .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { - .eraseblocks = { + .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -10224,7 +10224,7 @@ .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -10607,7 +10607,7 @@ .page_size = 256, /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -10945,7 +10945,7 @@ .total_size = 64, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = @@ -11677,7 +11677,7 @@ /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -11914,7 +11914,7 @@ /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -11984,7 +11984,7 @@ .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -12266,7 +12266,7 @@ .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { { @@ -12524,7 +12524,7 @@ .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { {
Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/flashchips.h Fri Jul 26 00:54:25 2013 (r1702) @@ -141,7 +141,7 @@ #define ATMEL_AT25DL161 0x4603 /* EDI 0x0100 */ #define ATMEL_AT25DQ161 0x8600 /* EDI 0x0100 */ #define ATMEL_AT25DQ321 0x8700 /* EDI 0x0100 */ -#define ATMEL_AT25F512 0x65 /* guessed, no device ID in datasheet. Needs AT25F_RDID */ +#define ATMEL_AT25F512 0x60 /* Needs AT25F_RDID. ID from PCN and actual HW. Seems to be a relabeled AT25F1024. */ #define ATMEL_AT25F512A 0x65 /* Needs AT25F_RDID */ #define ATMEL_AT25F512B 0x6500 #define ATMEL_AT25F1024 0x60 /* Needs AT25F_RDID */ @@ -208,6 +208,11 @@ #define ESMT_ID 0x8C /* Elite Semiconductor Memory Technology (ESMT) / EFST Elite Flash Storage */ #define ESMT_F25L008A 0x2014 #define ESMT_F25D08QA 0x2534 +#define ESMT_F25L16QA2S 0x4015 +#define ESMT_F25L32QA 0x4016 +#define ESMT_F25L32QA2S 0x4116 +#define ESMT_F25L64QA 0x4117 +#define ESMT_F25L128QA 0x4118 #define ESMT_F49B002UA 0x00
/* @@ -271,6 +276,8 @@ #define EON_EN25S16 0x3815 #define EON_EN25S32 0x3816 #define EON_EN25S64 0x3817 +#define EON_EN25T80 0x5114 +#define EON_EN25T16 0x5115 #define EON_EN29F512 0x7F21 #define EON_EN29F010 0x20 #define EON_EN29F040A 0x7F04 @@ -280,6 +287,12 @@ #define EON_EN29F002T 0x7F92 /* Same as EN29F002A */ #define EON_EN29F002B 0x7F97 /* Same as EN29F002AN */
+#define EXCEL_ID 0x7F7F7F7F4A /* Excel Semiconductor Inc. (ESI) resides in bank 5 */ +#define EXCEL_ID_NOPREFIX 0x4A /* ESI, missing 0x7F prefix */ +#define EXCEL_ES25P40 0x2013 +#define EXCEL_ES25P80 0x2014 +#define EXCEL_ES25P16 0x2015 + #define FIDELIX_ID 0xF8 /* Fidelix */ #define FIDELIX_FM25M16 0x4215 #define FIDELIX_FM25M32 0x4216 @@ -423,11 +436,14 @@ #define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52) */ #define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E (4k 0x20, 64k 0x52) */ #define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D */ +#define MACRONIX_MX25L25635F 0x2019 /* Same as MX25L25639F, but the latter seems to not support REMS */ #define MACRONIX_MX25L1635D 0x2415 #define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */ #define MACRONIX_MX25U1635E 0x2535 #define MACRONIX_MX25U3235E 0x2536 /* Same as MX25U6435F */ #define MACRONIX_MX25U6435E 0x2537 /* Same as MX25U6435F */ +#define MACRONIX_MX25U12835E 0x2538 /* Same as MX25U12835F */ +#define MACRONIX_MX25U25635F 0x2539 #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18
Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/flashrom.8 Fri Jul 26 00:54:25 2013 (r1702) @@ -1,4 +1,4 @@ -.TH FLASHROM 8 "Dec, 2012" +.TH FLASHROM 8 "Jul, 2013" .SH NAME flashrom - detect, read, write, verify and erase flash chips .SH SYNOPSIS @@ -590,7 +590,9 @@ is the serial number of the device (which can be found for example in the output of lsusb -v). .sp All models supported by the ft2232_spi driver can configure the SPI clock rate by setting a divisor. The -expressible divisors are all even numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of +expressible divisors are all +.B even +numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of 6 MHz down to about 92 Hz for 12 MHz inputs. The default divisor is set to 2, but you can use another one by specifying the optional .B divisor @@ -615,12 +617,12 @@ instead. In case the device supports it, you can set the SPI clock frequency with the optional .B spispeed -parameter. The frequency is parsed as Hertz, unless an +parameter. The frequency is parsed as hertz, unless an .BR M ", or " k suffix is given, then megahertz or kilohertz are used respectively. Example that sets the frequency to 2 MHz: .sp -.B "flashrom -p serprog:dev=/dev/device:baud,spispeed=2M" +.B " flashrom -p serprog:dev=/dev/device:baud,spispeed=2M" .sp More information about serprog is available in .B serprog-protocol.txt @@ -797,6 +799,13 @@ .B /dev/spidevX.Y is the Linux device node for your SPI controller. .sp +In case the device supports it, you can set the SPI clock frequency with the optional +.B spispeed +parameter. The frequency is parsed as kilohertz. +Example that sets the frequency to 8 MHz: +.sp +.B " flashrom -p linux_spi:dev=/dev/spidevX.Y,spispeed=8000" +.sp Please note that the linux_spi driver only works on Linux. .SH EXAMPLES To back up and update your BIOS, run
Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/flashrom.c Fri Jul 26 00:54:25 2013 (r1702) @@ -1995,7 +1995,7 @@ } }
- if (verify_it) { + if (verify_it && !all_skipped) { msg_cinfo("Verifying flash... ");
if (write_it) {
Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/hwaccess.h Fri Jul 26 00:54:25 2013 (r1702) @@ -240,19 +240,19 @@ #if defined(__i386__) || defined(__x86_64__) #include <sys/types.h> #include <machine/sysarch.h> -#if defined(__NetBSD__) - #if defined(__i386__) - #define iopl i386_iopl - #elif defined(__x86_64__) - #define iopl x86_64_iopl + #if defined(__NetBSD__) + #if defined(__i386__) + #define iopl i386_iopl + #elif defined(__x86_64__) + #define iopl x86_64_iopl + #endif + #elif defined (__OpenBSD__) + #if defined(__i386__) + #define iopl i386_iopl + #elif defined(__amd64__) + #define iopl amd64_iopl + #endif #endif -#elif defined (__OpenBSD__) - #if defined(__i386__) - #define iopl i386_iopl - #elif defined(__amd64__) - #define iopl amd64_iopl - #endif -#endif
static inline void outb(uint8_t value, uint16_t port) {
Modified: trunk/ich_descriptors.c ============================================================================== --- trunk/ich_descriptors.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/ich_descriptors.c Fri Jul 26 00:54:25 2013 (r1702) @@ -188,12 +188,12 @@ nr); return; } - for (i = 0; i <= nr; i++) + for (i = 0; i < 5; i++) msg_pdbg2("FLREG%d 0x%08x\n", i, desc->region.FLREGs[i]); msg_pdbg2("\n");
msg_pdbg2("--- Details ---\n"); - for (i = 0; i <= nr; i++) + for (i = 0; i < 5; i++) pprint_freg(&desc->region, i); msg_pdbg2("\n"); } @@ -805,7 +805,7 @@ __func__, nr); return ICH_RET_ERR; } - for (i = 0; i <= nr; i++) + for (i = 0; i < 5; i++) desc->region.FLREGs[i] = read_descriptor_reg(2, i, spibar);
/* master section */
Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/jedec.c Fri Jul 26 00:54:25 2013 (r1702) @@ -381,8 +381,8 @@ return failed; }
-int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, - unsigned int start, unsigned int page_size) +static int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, + unsigned int start, unsigned int page_size) { int i, tried = 0, failed; uint8_t *s = src;
Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/linux_spi.c Fri Jul 26 00:54:25 2013 (r1702) @@ -66,28 +66,33 @@ const uint8_t mode = SPI_MODE_0; const uint8_t bits = 8;
- dev = extract_programmer_param("dev"); - if (!dev || !strlen(dev)) { - msg_perr("No SPI device given. Use flashrom -p " - "linux_spi:dev=/dev/spidevX.Y\n"); - return 1; - } - - p = extract_programmer_param("speed"); + p = extract_programmer_param("spispeed"); if (p && strlen(p)) { speed = (uint32_t)strtoul(p, &endp, 10) * 1024; if (p == endp) { msg_perr("%s: invalid clock: %s kHz\n", __func__, p); + free(p); return 1; } } + free(p); + + dev = extract_programmer_param("dev"); + if (!dev || !strlen(dev)) { + msg_perr("No SPI device given. Use flashrom -p " + "linux_spi:dev=/dev/spidevX.Y\n"); + free(dev); + return 1; + }
msg_pdbg("Using device %s\n", dev); if ((fd = open(dev, O_RDWR)) == -1) { msg_perr("%s: failed to open %s: %s\n", __func__, dev, strerror(errno)); + free(dev); return 1; } + free(dev);
if (register_shutdown(linux_spi_shutdown, NULL)) return 1;
Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/physmap.c Fri Jul 26 00:54:25 2013 (r1702) @@ -220,13 +220,13 @@ }
if ((getpagesize() - 1) & len) { - msg_perr("Mapping %s at 0x%0*" PRIxPTR ", unaligned size 0x%lx.\n", - descr, PRIxPTR_WIDTH, phys_addr, (unsigned long)len); + msg_perr("Mapping %s at 0x%0*" PRIxPTR ", unaligned size 0x%zx.\n", + descr, PRIxPTR_WIDTH, phys_addr, len); }
if ((getpagesize() - 1) & phys_addr) { - msg_perr("Mapping %s, 0x%lx bytes at unaligned 0x%0*" PRIxPTR ".\n", - descr, (unsigned long)len, PRIxPTR_WIDTH, phys_addr); + msg_perr("Mapping %s, 0x%zx bytes at unaligned 0x%0*" PRIxPTR ".\n", + descr, len, PRIxPTR_WIDTH, phys_addr); }
if (readonly) @@ -237,8 +237,8 @@ if (ERROR_PTR == virt_addr) { if (NULL == descr) descr = "memory"; - msg_perr("Error accessing %s, 0x%lx bytes at 0x%0*" PRIxPTR "\n", - descr, (unsigned long)len, PRIxPTR_WIDTH, phys_addr); + msg_perr("Error accessing %s, 0x%zx bytes at 0x%0*" PRIxPTR "\n", + descr, len, PRIxPTR_WIDTH, phys_addr); msg_perr(MEM_DEV " mmap failed: %s\n", strerror(errno)); #ifdef __linux__ if (EINVAL == errno) {
Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/print.c Fri Jul 26 00:54:25 2013 (r1702) @@ -160,7 +160,7 @@ msg_ginfo("Known"); for (i = 0; i < border; i++) msg_ginfo(" "); - msg_ginfo(" Size"); + msg_ginfo(" Size "); for (i = 0; i < border; i++) msg_ginfo(" ");
@@ -178,7 +178,7 @@ msg_ginfo("Broken"); for (i = 0; i < border; i++) msg_ginfo(" "); - msg_ginfo("[kB]"); + msg_ginfo("[kB] "); for (i = 0; i < border + maxtypelen; i++) msg_ginfo(" "); msg_gdbg("range [V]"); @@ -287,7 +287,7 @@ for (i = 0; i < border + 1; i++) msg_ginfo(" ");
- msg_ginfo("%5d", chip->total_size); + msg_ginfo("%6d", chip->total_size); for (i = 0; i < border; i++) msg_ginfo(" ");
@@ -565,9 +565,10 @@ B("ASRock", "A780FullHD", OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD", "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see http://www.flashrom.org/pipermail/flashrom/2012-July/009600.html for details."), B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), + B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "E350M1/USB3", OK, "http://www.asrock.com/mb/overview.asp?model=e350m1/usb3", NULL), + B("ASRock", "Fatal1ty Z77 Performance", BAD, "http://www.asrock.com/mb/overview.asp?Model=Fatal1ty%20Z77%20Performance", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "G31M-S rev 2.0", OK, "http://www.asrock.com/mb/overview.asp?model=G31M-S", NULL), - B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "H61M-ITX", BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "H67M", BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), @@ -577,6 +578,7 @@ B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), B("ASRock", "N61P-S", OK, "http://www.asrock.com/mb/overview.asp?Model=N61P-S", NULL), B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), + B("ASRock", "Z68 Extreme4", BAD, "http://www.asrock.com/mb/overview.asp?Model=Z68%20Extreme4", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), @@ -600,6 +602,7 @@ B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "C60M1-I", OK, "http://www.asus.com/Motherboards/C60M1I/", "The MAC address of the onboard network card is stored in flash."), B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), B("ASUS", "DSAN-DX", NT, "http://www.asus.com/Server_Workstation/Server_Motherboards/DSANDX/", NULL), @@ -711,13 +714,19 @@ B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B75-M LE", BAD, NULL, "Probing works (2x 8192 kB via hwseq), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H77-I", OK, "http://www.asus.com/Motherboards/P8H77I/", NULL), + B("ASUS", "P8H77-M", OK, "http://www.asus.com/Motherboards/P8H77M/", NULL), B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8P67 LE", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 LE (B2)", OK, NULL, NULL), + B("ASUS", "P8P67 LE (B3)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 PRO (rev. 3.0)", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/", NULL), + B("ASUS", "P8P67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), + B("ASUS", "P8Z68-V LE", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO/GEN3", OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), B("ASUS", "SABERTOOTH 990FX", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/", NULL), @@ -751,6 +760,7 @@ B("DFI", "AD77", NT, NULL, "Untested board enable."), B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWind...", NULL), B("Elitegroup", "848P-A7", OK, NULL, NULL), + B("Elitegroup", "GeForce6100PM-M2 (V3.0)", OK, NULL, NULL), B("Elitegroup", "GeForce6100SM-M", OK, NULL, NULL), B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, NULL, NULL), B("Elitegroup", "GF8200A", OK, NULL, NULL), @@ -830,6 +840,7 @@ B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-P55A-UD7" , OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3324", NULL), B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), B("GIGABYTE", "GA-X58A-UD3R (rev. 2.0)", OK, NULL, NULL), B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL), @@ -865,6 +876,7 @@ B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), B("Intel", "DH67CL", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html"), B("Intel", "DN2800MT (Marshalltown)", BAD, NULL, "BIOS locked via BIOS_CNTL."), + B("Intel", "DQ77MK", BAD, NULL, "Q77 with BIOS lock enable and locked ME region, see http://paste.flashrom.org/view.php?id=1603"), B("Intel", "EP80759", OK, NULL, NULL), B("Intel", "Foxhollow", OK, NULL, "Intel reference board."), B("Intel", "Greencity", OK, NULL, "Intel reference board."), @@ -918,6 +930,7 @@ B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&...", NULL), + B("MSI", "MS-7551 (KA780G)", OK, "http://www.msi.com/product/mb/KA780G.html", NULL), B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL), B("MSI", "MS-7597 (GF615M-P33)", BAD, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html"), B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL), @@ -929,7 +942,9 @@ B("MSI", "MS-7676 (Z68MA-G45 (B3))", OK, "http://www.msi.com/product/mb/Z68MA-G45--B3-.html", NULL), B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), - B("MSI", "MS-7740 (H61MA-E35(B3))", OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL), + B("MSI", "MS-7740 (H61MA-E35(B3))", OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL), + B("MSI", "MS-7756 (H77MA-G43)", OK, "http://www.msi.com/product/mb/H77MA-G43.html", NULL), + B("MSI", "MS-7808 (B75MA-E33)", OK, "http://www.msi.com/product/mb/B75MA-E33.html", NULL), B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), B("Nokia", "IP530", OK, NULL, NULL), B("Palit", "N61S", OK, NULL, NULL), @@ -946,6 +961,7 @@ B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), B("Samsung", "Polaris 32", OK, NULL, NULL), + B("SAPPHIRE", "IPC-E350M1", OK, "http://www.sapphiretech.com/presentation/product/?pid=1034&lid=1", NULL), B("Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL), B("Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), B("Shuttle", "AV11V30", OK, NULL, NULL), @@ -971,6 +987,7 @@ B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&...", NULL), B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&a...", NULL), + B("Supermicro", "X8DTG-D", OK, "http://www.supermicro.com/products/motherboard/qpi/5500/x8dtg-df.cfm", NULL), B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), B("Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), B("Supermicro", "X8DTT-HIBQF", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL), @@ -979,11 +996,14 @@ B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI=...", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), B("Supermicro", "X9DR3-F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9dr3-f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9DRD-7LN4F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9drd-7ln4f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9DRT-HF+", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X9DRW", BAD, NULL, "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9QRi-F+", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C600/X9QRi-F_.cfm", "Probing works (Macronix MX25L12805, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCE-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCE-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCM-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCM-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL), @@ -1020,6 +1040,7 @@ B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU...", NULL), B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL), B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL), + B("Tyan", "S7066 (S7066WGM3NR)", BAD, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=790&SKU...", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("VIA", "EITX-3000", OK, "http://www.viaembedded.com/en/products/boards/810/1/EITX-3000.html", NULL), B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a...", NULL), /* EPIA-MII link for now */ B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a...", NULL),
Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/serprog.c Fri Jul 26 00:54:25 2013 (r1702) @@ -797,7 +797,7 @@ static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) { unsigned char sbuf[6]; - msg_pspew("%s: addr=0x%" PRIxPTR " len=%lu\n", __func__, addr, (unsigned long)len); + msg_pspew("%s: addr=0x%" PRIxPTR " len=%zu\n", __func__, addr, len); /* Stream the read-n -- as above. */ if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes)) sp_execute_opbuf_noflush();
Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Thu Jul 18 01:46:44 2013 (r1701) +++ trunk/spi25_statusreg.c Fri Jul 26 00:54:25 2013 (r1702) @@ -640,7 +640,7 @@ int spi_prettyprint_status_register_bp2_ep_srwd(struct flashctx *flash) { uint8_t status = spi_read_status_register(flash); - msg_cdbg("Chip status register is %02x\n", status); + msg_cdbg("Chip status register is 0x%02x\n", status);
spi_prettyprint_status_register_srwd(status); msg_cdbg("Chip status register: Program Fail Flag (P_FAIL) is %sset\n",