Re: [flashrom] [PATCH] Convert ft2232_spi to msg_*

[Carl-Daniel Hailfinger]

On 09.01.2010 20:19, Sean Nelson wrote:
> Convert all messages in ft2232_spi.c to the new message infrastructure.
>
> Signed-off-by: Sean Nelson 
> diff --git a/ft2232_spi.c b/ft2232_spi.c
> index 80c6d4e..efc328a 100644
> --- a/ft2232_spi.c
> +++ b/ft2232_spi.c
> @@ -167,7 +156,7 @@ int ft2232_spi_init(void)
>  #define MPSSE_CLK 12.0
>
> #endif
> printf_debug("Set clock divisor\n");
> msg_pdbg("Set clock divisor\n");
> buf[0] = 0x86;		/* command "set divisor" */
> /* valueL/valueH are (desired_divisor - 1) */
> buf[1] = (DIVIDE_BY - 1) & 0xff;
>
> @@ -175,16 +164,16 @@ int ft2232_spi_init(void)
>    if (send_buf(ftdic, buf, 3))
>    	return -1;
> printf("SPI clock is %fMHz\n",
> msg_pinfo("SPI clock is %fMHz\n",

pdbg please
>       (double)(MPSSE_CLK / (((DIVIDE_BY - 1) + 1) * 2)));
>
> /* Disconnect TDI/DO to TDO/DI for loopback. */
> printf_debug("No loopback of TDI/DO TDO/DI\n");
> msg_pdbg("No loopback of TDI/DO TDO/DI\n");
> buf[0] = 0x85;
> if (send_buf(ftdic, buf, 1))
> return -1;
> printf_debug("Set data bits\n");
> msg_pdbg("Set data bits\n");
> /* Set data bits low-byte command:
> value: 0x08  CS=high, DI=low, DO=low, SK=low
> dir: 0x0b  CS=output, DI=input, DO=output, SK=output

Regards,
Carl-Daniel