On Mon, 30 May 2011 17:42:36 +0200 Stefan Tauner stefan.tauner@student.tuwien.ac.at wrote:
Aber mein Problem ist vor diesen Sachen. « chipset_flash_enable » findet nicht das PCH: « This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. »
und das PCH device_id (Vendor ID:0x8086, Device ID:0x244e ) existiert nicht in das «chipset_enables » stuct. ( mein PCH heisst Patsburg oder C200 chipset ).
hello again amine,
i have looked into that again and i think you have added the wrong pci id. according to the current pciid list 0x244e is the pci bridge and not the lpc controller. in that case it cant work of course. if you could provide a full lspci -nn log, we could determine the correct id. i think it should be something between 0x1c40 and 0x1c5f depending on your exact chipset (revision).
that wont help if your board locks down certain regions, but it would be valuable to us to know if enable_flash_ich10 still works for sandy bridge.