Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z.
Signed-off-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at --- dediprog.c | 10 +++++++++- flashrom.c | 5 ++--- programmer.h | 1 + 3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/dediprog.c b/dediprog.c index 6a9b9ae..019de46 100644 --- a/dediprog.c +++ b/dediprog.c @@ -143,6 +143,11 @@ enum dediprog_standalone_mode { LEAVE_STANDALONE_MODE = 1, };
+const struct dev_entry devs_dediprog[] = { + {0x0483, 0xDADA, OK, "Dediprog", "SF100/SF600"}, + + {0}, +};
static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN; @@ -1019,7 +1024,10 @@ int dediprog_init(void) msg_perr("Could not initialize libusb!\n"); return 1; } - dediprog_handle = get_device_by_vid_pid_number(0x0483, 0xdada, (unsigned int) usedevice); + + const uint16_t vid = devs_dediprog[0].vendor_id; + const uint16_t pid = devs_dediprog[0].device_id; + dediprog_handle = get_device_by_vid_pid_number(vid, pid, (unsigned int) usedevice); if (!dediprog_handle) { msg_perr("Could not find a Dediprog programmer on USB.\n"); libusb_exit(usb_ctx); diff --git a/flashrom.c b/flashrom.c index 7bdfb73..6ca633e 100644 --- a/flashrom.c +++ b/flashrom.c @@ -247,9 +247,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_DEDIPROG == 1 { .name = "dediprog", - .type = OTHER, - /* FIXME */ - .devs.note = "Dediprog SF100\n", + .type = USB, + .devs.dev = devs_dediprog, .init = dediprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, diff --git a/programmer.h b/programmer.h index 301f3ff..61702a4 100644 --- a/programmer.h +++ b/programmer.h @@ -527,6 +527,7 @@ int linux_spi_init(void); /* dediprog.c */ #if CONFIG_DEDIPROG == 1 int dediprog_init(void); +extern const struct dev_entry devs_dediprog[]; #endif
/* ch341a_spi.c */