Re: [flashrom] [PATCH] satamv.c requires PCI port I/O

[Rudolf Marek]

On 29.6.2011 00:53, Andrew Morgan wrote:
> satamv.c requires PCI port I/O which isn't currently available on anything other
> than x86/x86_64. Generate the same compiler error as other programmers eg.
> rayer_spi.c, which is where I copied the code from.

Hi,

The PowerPC usually have a memory bar similar to MMCONFIG which generates the IO 
cycles. So, in fact you can have IO ports access which are just memory mapped 
reads or writes.

This is CPU/SoC dependent so I guess it is OK this way, but this all was just FYI ;)

Thanks
Rudolf
> Signed-off-by: Andrew Morgan <[e-mail]>
>
> _______________________________________________
> flashrom mailing list
> [e-mail]
> http://www.flashrom.org/mailman/listinfo/flashrom