flashrom

flashrom@flashrom.org

1 participants
9182 discussions

[commit] r732 - trunk
by svn＠flashrom.org 24 Sep '09

24 Sep '09

Author: uwe Date: 2009-09-25 03:05:06 +0200 (Fri, 25 Sep 2009) New Revision: 732 Modified: trunk/chipset_enable.c Log: Add chipset support for VIA VT82C596 by adding a PCI ID (trivial). This is successfully tested by me on the Elitegroup P6VAP-A+ board. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-09-23 22:01:33 UTC (rev 731) +++ trunk/chipset_enable.c 2009-09-25 01:05:06 UTC (rev 732) @@ -1046,6 +1046,7 @@ {0x1106, 0x3337, OK, "VIA", "VT8237A", enable_flash_vt823x}, {0x1106, 0x3372, OK, "VIA", "VT8237S", enable_flash_vt8237s_spi}, {0x1106, 0x8353, OK, "VIA", "VX800", enable_flash_vt8237s_spi}, + {0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111}, {0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111}, {0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111},

1 0

actual bios settings
by Bart Swinnen 24 Sep '09

24 Sep '09

Hi Does flashrom normally also reads actual BIOS setting of a board? I'm trying flashrom on IEI Wafer-LX-800 It finds PMC Pm49FL004 device and I can read it. It gives me a 512k bin file. If I write this file to another board of its kind, I still have the actual settings of that board and not the one stored in the board where I had the bin from. Am I missing something? Kind regards Bart Swinnen

3 4

[PATCH] Switch SST49LF004A/B to blockwise erase
by Carl-Daniel Hailfinger 23 Sep '09

23 Sep '09

Switch SST49LF004A/B to block erase, remove the hack which simulated (unsupported) chip erase. Annotate SST49LF004B quirks for TBL#. Add TEST_OK_PRW which is useful when a PREW chip gets a new erase routine. Change a few erase function prototypes to use unsigned int instead of int. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-sst49lf004b_eraseblocks/flash.h =================================================================== --- flashrom-sst49lf004b_eraseblocks/flash.h (Revision 727) +++ flashrom-sst49lf004b_eraseblocks/flash.h (Arbeitskopie) @@ -225,6 +225,7 @@ #define TEST_OK_WRITE (1 << 3) #define TEST_OK_PR (TEST_OK_PROBE | TEST_OK_READ) #define TEST_OK_PRE (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE) +#define TEST_OK_PRW (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_WRITE) #define TEST_OK_PREW (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE | TEST_OK_WRITE) #define TEST_OK_MASK 0x0f @@ -596,8 +597,8 @@ int probe_jedec(struct flashchip *flash); int erase_chip_jedec(struct flashchip *flash); int write_jedec(struct flashchip *flash, uint8_t *buf); -int erase_sector_jedec(struct flashchip *flash, unsigned int page, int pagesize); -int erase_block_jedec(struct flashchip *flash, unsigned int page, int blocksize); +int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize); +int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); int write_sector_jedec(chipaddr bios, uint8_t *src, chipaddr dst, unsigned int page_size); @@ -657,6 +658,7 @@ /* sst_fwhub.c */ int probe_sst_fwhub(struct flashchip *flash); int erase_sst_fwhub(struct flashchip *flash); +int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset, unsigned int page_size); int write_sst_fwhub(struct flashchip *flash, uint8_t *buf); /* w39v040c.c */ Index: flashrom-sst49lf004b_eraseblocks/jedec.c =================================================================== --- flashrom-sst49lf004b_eraseblocks/jedec.c (Revision 727) +++ flashrom-sst49lf004b_eraseblocks/jedec.c (Arbeitskopie) @@ -175,7 +175,7 @@ return 0; } -int erase_sector_jedec(struct flashchip *flash, unsigned int page, int pagesize) +int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize) { chipaddr bios = flash->virtual_memory; @@ -204,7 +204,7 @@ return 0; } -int erase_block_jedec(struct flashchip *flash, unsigned int block, int blocksize) +int erase_block_jedec(struct flashchip *flash, unsigned int block, unsigned int blocksize) { chipaddr bios = flash->virtual_memory; Index: flashrom-sst49lf004b_eraseblocks/flashchips.c =================================================================== --- flashrom-sst49lf004b_eraseblocks/flashchips.c (Revision 727) +++ flashrom-sst49lf004b_eraseblocks/flashchips.c (Arbeitskopie) @@ -2141,6 +2141,9 @@ }, { + /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) + * and is only honored for 64k block erase, but not 4k sector erase. + */ .vendor = "SST", .name = "SST49LF004A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ @@ -2148,10 +2151,23 @@ .model_id = SST_49LF004A, .total_size = 512, .page_size = 64 * 1024, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PRW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = erase_sst_fwhub, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, /* missing unlock */ + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sst_fwhub_block, /* same as erase_sector_block, but with unlock */ + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in PP mode */ + }, + }, .write = write_sst_fwhub, .read = read_memmapped, }, Index: flashrom-sst49lf004b_eraseblocks/sst_fwhub.c =================================================================== --- flashrom-sst49lf004b_eraseblocks/sst_fwhub.c (Revision 727) +++ flashrom-sst49lf004b_eraseblocks/sst_fwhub.c (Arbeitskopie) @@ -94,7 +94,7 @@ return 1; } -int erase_sst_fwhub_block(struct flashchip *flash, int offset, int page_size) +int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset, unsigned int page_size) { uint8_t blockstatus = clear_sst_fwhub_block_lock(flash, offset); -- http://www.hailfinger.org/

2 4

[commit] r731 - trunk
by svn＠flashrom.org 23 Sep '09

23 Sep '09

Author: hailfinger Date: 2009-09-24 00:01:33 +0200 (Thu, 24 Sep 2009) New Revision: 731 Modified: trunk/flash.h trunk/flashchips.c trunk/jedec.c trunk/sst_fwhub.c Log: Switch SST49LF004A/B to block erase, remove the hack which simulated (unsupported) chip erase. Annotate SST49LF004B quirks for TBL#. Add TEST_OK_PRW which is useful when a PREW chip gets a new erase routine. Change a few erase function prototypes to use unsigned int instead of int. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Luc Verhaegen <libv(a)skynet.be> Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-09-23 21:58:34 UTC (rev 730) +++ trunk/flash.h 2009-09-23 22:01:33 UTC (rev 731) @@ -225,6 +225,7 @@ #define TEST_OK_WRITE (1 << 3) #define TEST_OK_PR (TEST_OK_PROBE | TEST_OK_READ) #define TEST_OK_PRE (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE) +#define TEST_OK_PRW (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_WRITE) #define TEST_OK_PREW (TEST_OK_PROBE | TEST_OK_READ | TEST_OK_ERASE | TEST_OK_WRITE) #define TEST_OK_MASK 0x0f @@ -596,8 +597,8 @@ int probe_jedec(struct flashchip *flash); int erase_chip_jedec(struct flashchip *flash); int write_jedec(struct flashchip *flash, uint8_t *buf); -int erase_sector_jedec(struct flashchip *flash, unsigned int page, int pagesize); -int erase_block_jedec(struct flashchip *flash, unsigned int page, int blocksize); +int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize); +int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); int write_sector_jedec(chipaddr bios, uint8_t *src, chipaddr dst, unsigned int page_size); @@ -657,6 +658,7 @@ /* sst_fwhub.c */ int probe_sst_fwhub(struct flashchip *flash); int erase_sst_fwhub(struct flashchip *flash); +int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset, unsigned int page_size); int write_sst_fwhub(struct flashchip *flash, uint8_t *buf); /* w39v040c.c */ Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-09-23 21:58:34 UTC (rev 730) +++ trunk/flashchips.c 2009-09-23 22:01:33 UTC (rev 731) @@ -2141,6 +2141,9 @@ }, { + /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) + * and is only honored for 64k block erase, but not 4k sector erase. + */ .vendor = "SST", .name = "SST49LF004A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ @@ -2151,7 +2154,20 @@ .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = erase_sst_fwhub, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, /* missing unlock */ + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sst_fwhub_block, /* same as erase_sector_block, but with unlock */ + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in PP mode */ + }, + }, .write = write_sst_fwhub, .read = read_memmapped, }, Modified: trunk/jedec.c =================================================================== --- trunk/jedec.c 2009-09-23 21:58:34 UTC (rev 730) +++ trunk/jedec.c 2009-09-23 22:01:33 UTC (rev 731) @@ -175,7 +175,7 @@ return 0; } -int erase_sector_jedec(struct flashchip *flash, unsigned int page, int pagesize) +int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize) { chipaddr bios = flash->virtual_memory; @@ -204,7 +204,7 @@ return 0; } -int erase_block_jedec(struct flashchip *flash, unsigned int block, int blocksize) +int erase_block_jedec(struct flashchip *flash, unsigned int block, unsigned int blocksize) { chipaddr bios = flash->virtual_memory; Modified: trunk/sst_fwhub.c =================================================================== --- trunk/sst_fwhub.c 2009-09-23 21:58:34 UTC (rev 730) +++ trunk/sst_fwhub.c 2009-09-23 22:01:33 UTC (rev 731) @@ -94,7 +94,7 @@ return 1; } -int erase_sst_fwhub_block(struct flashchip *flash, int offset, int page_size) +int erase_sst_fwhub_block(struct flashchip *flash, unsigned int offset, unsigned int page_size) { uint8_t blockstatus = clear_sst_fwhub_block_lock(flash, offset);

1 0

[PATCH] Change status of SST49LF020A to TEST_OK_PREW
by Nils 23 Sep '09

23 Sep '09

The attached patch changes the status of the SST49LF020A to TEST_OK_PREW. Signed-off-by: Nils Jacobs <njacobs8(a)hetnet.nl> I tested it on the Wyse Winterm S50 see attached test results. Thanks, Nils.

2 1

[commit] r730 - trunk
by svn＠flashrom.org 23 Sep '09

23 Sep '09

Author: hailfinger Date: 2009-09-23 23:58:34 +0200 (Wed, 23 Sep 2009) New Revision: 730 Modified: trunk/flashchips.c Log: Change the status of the SST49LF020A to TEST_OK_PREW. I tested it on the Wyse Winterm S50 see attached test results. Signed-off-by: Nils Jacobs <njacobs8(a)hetnet.nl> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-09-23 02:09:23 UTC (rev 729) +++ trunk/flashchips.c 2009-09-23 21:58:34 UTC (rev 730) @@ -2244,7 +2244,7 @@ .model_id = SST_49LF020A, .total_size = 256, .page_size = 4 * 1024, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .erase = erase_49lf040,

1 0

Re: [flashrom] flashrom failure on Shuttle barebone
by Ulf Mehlig 23 Sep '09

23 Sep '09

00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 97 12 36 50 08 e0 e0 01 22 00 11 11 d0 00 00 00 50: 23 06 7f 80 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 00 00 70: 44 44 00 00 d0 09 00 00 00 00 00 00 88 00 00 00 80: 13 ff 88 00 fa 00 00 00 03 00 00 00 61 00 00 00 90: 0e 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 97 12 36 50 00 f0 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 01 40 00 00 01 44 00 00 01 48 00 00 00 01 f9 ff 70: 10 00 ff ff 41 00 00 00 00 00 44 19 00 d2 20 01 80: 09 d0 00 12 01 08 00 00 c0 00 00 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 21 64 87 a9 de bc 00 00 a0: 03 00 10 41 00 00 00 00 00 00 00 00 00 00 00 00 b0: 90 02 ef 02 00 00 00 00 00 00 00 00 00 00 00 00 c0: 35 82 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 14 10 01 00 00 00 d0 00 80 38 00 00 61 44 44 11 f0: 5a ff 5f bf 00 00 00 c0 10 ff ff ff 00 00 30 07 00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at e400 [size=32] Region 4: I/O ports at 4c00 [size=64] Region 5: I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus 00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 01 e4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 4c 00 00 41 4c 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 01 03 01 40: 97 12 36 50 01 00 02 c0 00 00 00 00 00 00 00 00 50: 01 4c 00 00 41 4c 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at d8204000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00 10: 00 40 20 d8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 97 12 36 50 01 00 02 fe 00 00 00 00 00 00 00 00 50: 07 00 00 00 1d 47 40 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 03 0d 30 07 00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00 10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01 40: 97 12 36 50 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 e4 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 33 00 11 22 44 00 00 00 ff 03 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 05 11 30 07 00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: AMD_IDE 00: de 10 53 00 05 00 b0 00 a2 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f0 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 97 12 36 50 01 00 02 00 00 00 00 00 00 00 00 00 50: 02 f0 01 00 00 00 00 00 a8 a8 a8 20 2a 00 99 20 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 10 e0 63 33 00 00 02 10 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 0a 15 30 07 00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d800 [size=16] Region 5: Memory at d8202000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv 00: de 10 54 00 07 00 b0 00 a3 85 01 01 00 00 00 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 d8 00 00 00 20 20 d8 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 97 12 36 50 01 00 02 00 00 00 00 00 00 00 00 00 50: 17 00 00 15 00 00 00 00 a8 20 a8 20 66 00 20 20 60: 00 c7 00 c7 51 0c 00 00 08 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 c0 00 a0 4d 1e 00 00 02 04 00 80 c4 2f 90: 00 00 02 08 00 00 00 00 06 00 06 10 00 00 01 01 a0: 50 01 00 7c 00 00 00 00 00 00 00 00 33 bb aa 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 0a 00 02 04 42 00 00 00 00 00 00 00 01 00 00 e0 e0: 0a 00 02 04 42 00 00 00 00 00 00 00 89 32 c1 e0 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 09 46 32 07 00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: nVidia Corporation Device [10de:cb84] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: Memory at d8201000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_nv 00: de 10 55 00 07 00 b0 00 a3 85 01 01 00 00 00 00 10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00 20: 01 c4 00 00 00 10 20 d8 00 00 00 00 de 10 84 cb 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: de 10 84 cb 01 00 02 00 00 00 00 00 00 00 00 00 50: 17 00 00 15 00 00 00 00 a8 a8 a8 a8 aa 00 99 99 60: 00 00 00 00 51 0c 00 00 08 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 06 00 06 10 00 00 01 01 a0: 50 01 00 00 00 00 00 00 00 00 00 00 33 bb aa 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 0a 00 02 04 42 00 00 00 00 00 00 00 44 61 01 01 e0: 0a 00 02 04 42 00 00 00 00 00 00 00 b1 88 85 00 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 00 00 30 07 00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d8100000-d81fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- 00: de 10 5c 00 07 01 a0 00 a2 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 05 05 20 a0 a0 80 a2 20: 10 d8 10 d8 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02 40: 00 00 07 00 01 00 02 00 07 00 00 00 00 00 44 01 50: 00 00 fe 7f 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 02 00 00 02 a0 00 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at d8200000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Kernel driver in use: forcedeth 00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00 10: 00 00 20 d8 01 b0 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14 40: 97 12 36 50 01 00 02 fe 00 01 00 00 0a 00 00 10 50: 05 64 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 0f 00 00 00 08 00 02 a8 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 40 ff ff ff 05 25 32 07 00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x2, ASPM L0s, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 8, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> 00: de 10 5d 00 07 01 10 00 a3 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 21 34 01 03 90: 00 00 41 10 80 0c 40 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 4, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> 00: de 10 5d 00 07 01 10 00 a3 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 02 90: 00 00 41 10 00 05 20 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 2, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> 00: de 10 5d 00 07 01 10 00 a3 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 06 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 01 90: 00 00 81 10 00 05 10 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: d8000000-d80fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 1, PowerLimit 75.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> 00: de 10 5d 00 07 01 10 00 a3 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 91 91 00 00 20: 00 d8 00 d8 01 d0 f1 d7 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0e 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 01 35 01 00 90: 00 00 01 11 80 25 08 00 c0 01 40 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 00 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 69 01 61 01 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 e0 00 80 ff ef 00 03 b0 fe 00 80 c0 fe 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 03 0a 00 00 00 0b 00 00 03 00 80 00 00 d3 fe 00 c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 20 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 de e0 07 00 de e0 07 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 07 00 00 00 00 00 00 00 42 35 82 13 31 0b 00 00 90: 80 8e 05 38 07 07 7b 3e 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 4e 64 12 46 2d 00 00 00 df ef 00 08 ef 63 eb 32 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 68 d0 c8 05 86 52 42 b8 31 c2 ae 86 0c 09 78 09 e0: 20 40 88 32 48 02 18 00 c5 13 13 00 80 09 69 30 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 00 00 40 00 00 08 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 eb 68 6f 60: bb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 20 82 89 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 3f 00 00 20 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 20 04 57 0c 19 11 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0320] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at d8030000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d8000000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: radeonfb 00: 02 10 60 5b 07 00 10 00 00 00 00 03 08 00 80 00 10: 08 00 00 d0 01 90 00 00 00 00 03 d8 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 20 03 30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 20 03 50: 01 58 02 06 00 00 00 00 10 80 01 00 a0 04 2c 01 60: 10 08 00 00 01 ad 00 00 00 00 01 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.1 Display controller [0380]: ATI Technologies Inc RV370 [Radeon X300SE] [1002:5b70] Subsystem: Micro-Star International Co., Ltd. Device [1462:0321] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at d8020000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- 00: 02 10 70 5b 00 00 10 00 00 00 80 03 08 00 00 00 10: 00 00 02 d8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 21 03 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 02 06 00 00 00 00 10 00 01 00 80 04 00 00 60: 00 00 00 00 01 ad 00 00 00 00 01 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05:06.0 Multimedia audio controller [0401]: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller [1412:1724] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5036] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at a000 [size=32] Region 1: I/O ports at a400 [size=128] Capabilities: [80] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ICE1724 00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00 10: 01 a0 00 00 01 a4 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 97 12 36 50 30: 00 00 00 00 80 00 00 00 00 00 00 00 0c 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d8100000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at a800 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot +,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: firewire_ohci 00: 06 11 44 30 07 00 10 02 80 10 00 0c 08 20 00 00 10: 00 00 10 d8 01 a8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 20 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 02 e4 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- Dr. Ulf Mehlig · Laboratório de Biologia Vegetal Instituto de Estudos Costeiros (IECOS) Universidade Federal do Pará, Campus Bragança · Brazil ----------------------------------------------------------------------

3 2

[PATCH_v2] Enable flashrom on Wyse Winterm S50.
by Nils 22 Sep '09

22 Sep '09

Enable flashrom on Wyse Winterm S50. On the Wyse Winterm S50 lspci doesn`t show the cs5536 hostbridge and so flashrom doesn`t detect the cs5536. This patch is adding the cs5536 isa id [1022:2090] for chip detect. Signed-off-by: Nils Jacobs <njacobs8(a)hetnet.nl> nils@debian:~/flashrom$ sudo flashrom flashrom v0.9.1-r727 No coreboot table found. Found chipset "AMD CS5536_2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF020A" (256 KB, LPC) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === No operations were specified. nils@debian:~/flashrom$ Nils

2 1

[commit] r729 - trunk
by svn＠flashrom.org 22 Sep '09

22 Sep '09

Author: hailfinger Date: 2009-09-23 04:09:23 +0200 (Wed, 23 Sep 2009) New Revision: 729 Modified: trunk/chipset_enable.c Log: Enable flashrom on Wyse Winterm S50. On the Wyse Winterm S50 lspci doesn`t show the cs5536 hostbridge and so flashrom doesn`t detect the cs5536. This patch is adding the cs5536 isa id [1022:2090] for chip detect. Signed-off-by: Nils Jacobs <njacobs8(a)hetnet.nl> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-09-23 02:05:12 UTC (rev 728) +++ trunk/chipset_enable.c 2009-09-23 02:09:23 UTC (rev 729) @@ -972,6 +972,7 @@ {0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111}, {0x1078, 0x0100, OK, "AMD", "CS5530(A)", enable_flash_cs5530}, {0x1022, 0x2080, OK, "AMD", "CS5536", enable_flash_cs5536}, + {0x1022, 0x2090, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x3000, OK, "AMD", "Elan SC520", get_flashbase_sc520}, {0x1002, 0x438D, OK, "AMD", "SB600", enable_flash_sb600}, {0x1002, 0x439d, OK, "AMD", "SB700/SB710/SB750", enable_flash_sb600},

1 0

dell s1850
by ron minnich 22 Sep '09

22 Sep '09

Using my GPIO finder posted earlier, I have the gpio needed to enable flashing on the dell. I would like to get a patch together but have not done this mainboard enable thing. I would like to do this in the most-approved manner. Basically need to match the dell mainboard, find the 8086:24d0 bridge, look up a BAR, and twiddle one little gpio line. The northbridge looks like this: 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09) 00: 86 80 90 35 46 01 90 00 09 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 6c 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 41 10 00 00 00 00 00 00 00 00 00 00 00 50: 0c 20 4a 00 00 00 00 00 00 10 11 11 01 00 00 10 60: 10 10 10 10 20 20 30 30 00 00 00 00 00 00 00 00 70: 0a 00 0a 0a 00 00 00 00 44 11 5e 55 1e 02 20 2c 80: 41 28 41 00 00 00 00 00 80 01 00 f0 88 00 00 00 90: 00 00 00 00 00 aa 04 39 aa aa 0c 30 75 08 12 07 a0: 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 b0: cc 00 99 55 00 00 00 00 00 00 00 00 00 00 00 00 c0: 44 c0 50 33 00 e0 60 00 67 00 28 00 30 00 00 e0 d0: 02 28 00 0e 03 00 00 00 00 00 93 b5 00 00 00 00 e0: 00 00 00 00 00 00 00 00 34 3e 00 00 00 00 00 00 f0: 00 00 00 00 10 01 02 00 80 0f 0c 00 00 00 00 00 suggestions welcome. ron

2 7

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom