flashrom

flashrom@flashrom.org

5 participants
9161 discussions

[commit] r914 - trunk
by repository service 26 Feb '10

26 Feb '10

Author: snelson Date: Fri Feb 26 06:48:29 2010 New Revision: 914 URL: http://flashrom.org/trac/coreboot/changeset/914 Log: Split spi.c into programmer and chip code Remove chipdriver.h include from flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Added: trunk/spi25.c - copied, changed from r913, trunk/spi.c Modified: trunk/82802ab.c trunk/Makefile trunk/bitbang_spi.c trunk/buspirate_spi.c trunk/dediprog.c trunk/flash.h trunk/flashchips.c trunk/ft2232_spi.c trunk/ichspi.c trunk/it87spi.c trunk/jedec.c trunk/m29f400bt.c trunk/pm49fl00x.c trunk/sb600spi.c trunk/sharplhf00l04.c trunk/spi.c trunk/sst28sf040.c trunk/sst49lfxxxc.c trunk/sst_fwhub.c trunk/stm50flw0x0x.c trunk/w29ee011.c trunk/w39v040c.c trunk/w39v080fa.c trunk/wbsio_spi.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/82802ab.c Fri Feb 26 06:48:29 2010 (r914) @@ -29,6 +29,7 @@ #include <string.h> #include <stdlib.h> #include "flash.h" +#include "chipdrivers.h" // I need that Berkeley bit-map printer void print_82802ab_status(uint8_t status) Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Feb 25 12:38:23 2010 (r913) +++ trunk/Makefile Fri Feb 26 06:48:29 2010 (r914) @@ -43,7 +43,7 @@ CHIP_OBJS = jedec.o stm50flw0x0x.o w39v040c.o w39v080fa.o sharplhf00l04.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ - sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o + sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o LIB_OBJS = layout.o Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/bitbang_spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -23,6 +23,7 @@ #include <stdlib.h> #include <ctype.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" /* Length of half a clock period in usecs */ Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/buspirate_spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -23,6 +23,7 @@ #include <stdlib.h> #include <ctype.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" /* Change this to #define if you want to test without a serial implementation */ Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/dediprog.c Fri Feb 26 06:48:29 2010 (r914) @@ -23,6 +23,7 @@ #include <sys/types.h> #include <usb.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" #define DEFAULT_TIMEOUT 3000 Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Feb 25 12:38:23 2010 (r913) +++ trunk/flash.h Fri Feb 26 06:48:29 2010 (r914) @@ -681,6 +681,4 @@ int serialport_write(unsigned char *buf, unsigned int writecnt); int serialport_read(unsigned char *buf, unsigned int readcnt); -#include "chipdrivers.h" - #endif /* !__FLASH_H__ */ Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/flashchips.c Fri Feb 26 06:48:29 2010 (r914) @@ -24,6 +24,7 @@ #include "flash.h" #include "flashchips.h" +#include "chipdrivers.h" /** * List of supported flash chips. Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/ft2232_spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -26,6 +26,7 @@ #include <stdlib.h> #include <ctype.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" #include <ftdi.h> Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/ichspi.c Fri Feb 26 06:48:29 2010 (r914) @@ -35,6 +35,7 @@ #include <string.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" /* Change this to #define if you want lowlevel debugging of commands Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/it87spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -26,6 +26,7 @@ #include <string.h> #include <stdlib.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" #define ITE_SUPERIO_PORT1 0x2e Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/jedec.c Fri Feb 26 06:48:29 2010 (r914) @@ -23,6 +23,7 @@ */ #include "flash.h" +#include "chipdrivers.h" #define MAX_REFLASH_TRIES 0x10 #define MASK_FULL 0xffff Modified: trunk/m29f400bt.c ============================================================================== --- trunk/m29f400bt.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/m29f400bt.c Fri Feb 26 06:48:29 2010 (r914) @@ -19,6 +19,7 @@ */ #include "flash.h" +#include "chipdrivers.h" /* WARNING! This chip uses the standard JEDEC Addresses in 16-bit mode as word Modified: trunk/pm49fl00x.c ============================================================================== --- trunk/pm49fl00x.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/pm49fl00x.c Fri Feb 26 06:48:29 2010 (r914) @@ -21,6 +21,7 @@ */ #include "flash.h" +#include "chipdrivers.h" void write_lockbits_49fl00x(chipaddr bios, int size, unsigned char bits, int block_size) Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/sb600spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -22,6 +22,7 @@ #include <string.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" /* This struct is unused, but helps visualize the SB600 SPI BAR layout. Modified: trunk/sharplhf00l04.c ============================================================================== --- trunk/sharplhf00l04.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/sharplhf00l04.c Fri Feb 26 06:48:29 2010 (r914) @@ -20,6 +20,7 @@ #include <stdlib.h> #include "flash.h" +#include "chipdrivers.h" // I need that Berkeley bit-map printer void print_lhf00l04_status(uint8_t status) Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -25,6 +25,7 @@ #include <string.h> #include "flash.h" #include "flashchips.h" +#include "chipdrivers.h" #include "spi.h" enum spi_controller spi_controller = SPI_CONTROLLER_NONE; @@ -178,873 +179,6 @@ return result; } -static int spi_rdid(unsigned char *readarr, int bytes) -{ - const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID }; - int ret; - int i; - - ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); - if (ret) - return ret; - printf_debug("RDID returned"); - for (i = 0; i < bytes; i++) - printf_debug(" 0x%02x", readarr[i]); - printf_debug(". "); - return 0; -} - -static int spi_rems(unsigned char *readarr) -{ - unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 }; - uint32_t readaddr; - int ret; - - ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); - if (ret == SPI_INVALID_ADDRESS) { - /* Find the lowest even address allowed for reads. */ - readaddr = (spi_get_valid_read_addr() + 1) & ~1; - cmd[1] = (readaddr >> 16) & 0xff, - cmd[2] = (readaddr >> 8) & 0xff, - cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); - } - if (ret) - return ret; - printf_debug("REMS returned %02x %02x. ", readarr[0], readarr[1]); - return 0; -} - -static int spi_res(unsigned char *readarr) -{ - unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; - uint32_t readaddr; - int ret; - - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); - if (ret == SPI_INVALID_ADDRESS) { - /* Find the lowest even address allowed for reads. */ - readaddr = (spi_get_valid_read_addr() + 1) & ~1; - cmd[1] = (readaddr >> 16) & 0xff, - cmd[2] = (readaddr >> 8) & 0xff, - cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); - } - if (ret) - return ret; - printf_debug("RES returned %02x. ", readarr[0]); - return 0; -} - -int spi_write_enable(void) -{ - const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN }; - int result; - - /* Send WREN (Write Enable) */ - result = spi_send_command(sizeof(cmd), 0, cmd, NULL); - - if (result) - fprintf(stderr, "%s failed\n", __func__); - - return result; -} - -int spi_write_disable(void) -{ - const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI }; - - /* Send WRDI (Write Disable) */ - return spi_send_command(sizeof(cmd), 0, cmd, NULL); -} - -static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) -{ - unsigned char readarr[4]; - uint32_t id1; - uint32_t id2; - - if (spi_rdid(readarr, bytes)) - return 0; - - if (!oddparity(readarr[0])) - printf_debug("RDID byte 0 parity violation. "); - - /* Check if this is a continuation vendor ID */ - if (readarr[0] == 0x7f) { - if (!oddparity(readarr[1])) - printf_debug("RDID byte 1 parity violation. "); - id1 = (readarr[0] << 8) | readarr[1]; - id2 = readarr[2]; - if (bytes > 3) { - id2 <<= 8; - id2 |= readarr[3]; - } - } else { - id1 = readarr[0]; - id2 = (readarr[1] << 8) | readarr[2]; - } - - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); - - if (id1 == flash->manufacture_id && id2 == flash->model_id) { - /* Print the status register to tell the - * user about possible write protection. - */ - spi_prettyprint_status_register(flash); - - return 1; - } - - /* Test if this is a pure vendor match. */ - if (id1 == flash->manufacture_id && - GENERIC_DEVICE_ID == flash->model_id) - return 1; - - /* Test if there is any vendor ID. */ - if (GENERIC_MANUF_ID == flash->manufacture_id && - id1 != 0xff) - return 1; - - return 0; -} - -int probe_spi_rdid(struct flashchip *flash) -{ - return probe_spi_rdid_generic(flash, 3); -} - -/* support 4 bytes flash ID */ -int probe_spi_rdid4(struct flashchip *flash) -{ - /* only some SPI chipsets support 4 bytes commands */ - switch (spi_controller) { -#if INTERNAL_SUPPORT == 1 - case SPI_CONTROLLER_ICH7: - case SPI_CONTROLLER_ICH9: - case SPI_CONTROLLER_VIA: - case SPI_CONTROLLER_SB600: - case SPI_CONTROLLER_WBSIO: -#endif -#if FT2232_SPI_SUPPORT == 1 - case SPI_CONTROLLER_FT2232: -#endif -#if DUMMY_SUPPORT == 1 - case SPI_CONTROLLER_DUMMY: -#endif -#if BUSPIRATE_SPI_SUPPORT == 1 - case SPI_CONTROLLER_BUSPIRATE: -#endif -#if DEDIPROG_SUPPORT == 1 - case SPI_CONTROLLER_DEDIPROG: -#endif - return probe_spi_rdid_generic(flash, 4); - default: - printf_debug("4b ID not supported on this SPI controller\n"); - } - - return 0; -} - -int probe_spi_rems(struct flashchip *flash) -{ - unsigned char readarr[JEDEC_REMS_INSIZE]; - uint32_t id1, id2; - - if (spi_rems(readarr)) - return 0; - - id1 = readarr[0]; - id2 = readarr[1]; - - printf_debug("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); - - if (id1 == flash->manufacture_id && id2 == flash->model_id) { - /* Print the status register to tell the - * user about possible write protection. - */ - spi_prettyprint_status_register(flash); - - return 1; - } - - /* Test if this is a pure vendor match. */ - if (id1 == flash->manufacture_id && - GENERIC_DEVICE_ID == flash->model_id) - return 1; - - /* Test if there is any vendor ID. */ - if (GENERIC_MANUF_ID == flash->manufacture_id && - id1 != 0xff) - return 1; - - return 0; -} - -int probe_spi_res(struct flashchip *flash) -{ - unsigned char readarr[3]; - uint32_t id2; - const unsigned char allff[] = {0xff, 0xff, 0xff}; - const unsigned char all00[] = {0x00, 0x00, 0x00}; - - /* Check if RDID is usable and does not return 0xff 0xff 0xff or - * 0x00 0x00 0x00. In that case, RES is pointless. - */ - if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) && - memcmp(readarr, all00, 3)) { - msg_cdbg("Ignoring RES in favour of RDID.\n"); - return 0; - } - /* Check if REMS is usable and does not return 0xff 0xff or - * 0x00 0x00. In that case, RES is pointless. - */ - if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) && - memcmp(readarr, all00, JEDEC_REMS_INSIZE)) { - msg_cdbg("Ignoring RES in favour of REMS.\n"); - return 0; - } - - if (spi_res(readarr)) - return 0; - - /* FIXME: Handle the case where RES gives a 2-byte response. */ - id2 = readarr[0]; - printf_debug("%s: id 0x%x\n", __func__, id2); - if (id2 != flash->model_id) - return 0; - - /* Print the status register to tell the - * user about possible write protection. - */ - spi_prettyprint_status_register(flash); - return 1; -} - -uint8_t spi_read_status_register(void) -{ - const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR }; - /* FIXME: No workarounds for driver/hardware bugs in generic code. */ - unsigned char readarr[2]; /* JEDEC_RDSR_INSIZE=1 but wbsio needs 2 */ - int ret; - - /* Read Status Register */ - ret = spi_send_command(sizeof(cmd), sizeof(readarr), cmd, readarr); - if (ret) - fprintf(stderr, "RDSR failed!\n"); - - return readarr[0]; -} - -/* Prettyprint the status register. Common definitions. */ -void spi_prettyprint_status_register_common(uint8_t status) -{ - printf_debug("Chip status register: Bit 5 / Block Protect 3 (BP3) is " - "%sset\n", (status & (1 << 5)) ? "" : "not "); - printf_debug("Chip status register: Bit 4 / Block Protect 2 (BP2) is " - "%sset\n", (status & (1 << 4)) ? "" : "not "); - printf_debug("Chip status register: Bit 3 / Block Protect 1 (BP1) is " - "%sset\n", (status & (1 << 3)) ? "" : "not "); - printf_debug("Chip status register: Bit 2 / Block Protect 0 (BP0) is " - "%sset\n", (status & (1 << 2)) ? "" : "not "); - printf_debug("Chip status register: Write Enable Latch (WEL) is " - "%sset\n", (status & (1 << 1)) ? "" : "not "); - printf_debug("Chip status register: Write In Progress (WIP/BUSY) is " - "%sset\n", (status & (1 << 0)) ? "" : "not "); -} - -/* Prettyprint the status register. Works for - * ST M25P series - * MX MX25L series - */ -void spi_prettyprint_status_register_st_m25p(uint8_t status) -{ - printf_debug("Chip status register: Status Register Write Disable " - "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); - printf_debug("Chip status register: Bit 6 is " - "%sset\n", (status & (1 << 6)) ? "" : "not "); - spi_prettyprint_status_register_common(status); -} - -void spi_prettyprint_status_register_sst25(uint8_t status) -{ - printf_debug("Chip status register: Block Protect Write Disable " - "(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not "); - printf_debug("Chip status register: Auto Address Increment Programming " - "(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not "); - spi_prettyprint_status_register_common(status); -} - -/* Prettyprint the status register. Works for - * SST 25VF016 - */ -void spi_prettyprint_status_register_sst25vf016(uint8_t status) -{ - const char *bpt[] = { - "none", - "1F0000H-1FFFFFH", - "1E0000H-1FFFFFH", - "1C0000H-1FFFFFH", - "180000H-1FFFFFH", - "100000H-1FFFFFH", - "all", "all" - }; - spi_prettyprint_status_register_sst25(status); - printf_debug("Resulting block protection : %s\n", - bpt[(status & 0x1c) >> 2]); -} - -void spi_prettyprint_status_register_sst25vf040b(uint8_t status) -{ - const char *bpt[] = { - "none", - "0x70000-0x7ffff", - "0x60000-0x7ffff", - "0x40000-0x7ffff", - "all blocks", "all blocks", "all blocks", "all blocks" - }; - spi_prettyprint_status_register_sst25(status); - printf_debug("Resulting block protection : %s\n", - bpt[(status & 0x1c) >> 2]); -} - -void spi_prettyprint_status_register(struct flashchip *flash) -{ - uint8_t status; - - status = spi_read_status_register(); - printf_debug("Chip status register is %02x\n", status); - switch (flash->manufacture_id) { - case ST_ID: - if (((flash->model_id & 0xff00) == 0x2000) || - ((flash->model_id & 0xff00) == 0x2500)) - spi_prettyprint_status_register_st_m25p(status); - break; - case MX_ID: - if ((flash->model_id & 0xff00) == 0x2000) - spi_prettyprint_status_register_st_m25p(status); - break; - case SST_ID: - switch (flash->model_id) { - case 0x2541: - spi_prettyprint_status_register_sst25vf016(status); - break; - case 0x8d: - case 0x258d: - spi_prettyprint_status_register_sst25vf040b(status); - break; - default: - spi_prettyprint_status_register_sst25(status); - break; - } - break; - } -} - -int spi_chip_erase_60(struct flashchip *flash) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_CE_60_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_CE_60 }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_disable_blockprotect(); - if (result) { - fprintf(stderr, "spi_disable_blockprotect failed\n"); - return result; - } - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 1-85 s, so wait in 1 s steps. - */ - /* FIXME: We assume spi_read_status_register will never fail. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(1000 * 1000); - if (check_erased_range(flash, 0, flash->total_size * 1024)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -int spi_chip_erase_c7(struct flashchip *flash) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_CE_C7_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_CE_C7 }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_disable_blockprotect(); - if (result) { - fprintf(stderr, "spi_disable_blockprotect failed\n"); - return result; - } - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution\n", __func__); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 1-85 s, so wait in 1 s steps. - */ - /* FIXME: We assume spi_read_status_register will never fail. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(1000 * 1000); - if (check_erased_range(flash, 0, flash->total_size * 1024)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -int spi_chip_erase_60_c7(struct flashchip *flash) -{ - int result; - result = spi_chip_erase_60(flash); - if (result) { - printf_debug("spi_chip_erase_60 failed, trying c7\n"); - result = spi_chip_erase_c7(flash); - } - return result; -} - -int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_52_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_52, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(100 * 1000); - if (check_erased_range(flash, addr, blocklen)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -/* Block size is usually - * 64k for Macronix - * 32k for SST - * 4-32k non-uniform for EON - */ -int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_D8_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_D8, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(100 * 1000); - if (check_erased_range(flash, addr, blocklen)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -/* Block size is usually - * 4k for PMC - */ -int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BE_D7_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_D7, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 100-4000 ms, so wait in 100 ms steps. - */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(100 * 1000); - if (check_erased_range(flash, addr, blocklen)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -int spi_chip_erase_d8(struct flashchip *flash) -{ - int i, rc = 0; - int total_size = flash->total_size * 1024; - int erase_size = 64 * 1024; - - spi_disable_blockprotect(); - - printf("Erasing chip: \n"); - - for (i = 0; i < total_size / erase_size; i++) { - rc = spi_block_erase_d8(flash, i * erase_size, erase_size); - if (rc) { - fprintf(stderr, "Error erasing block at 0x%x\n", i); - break; - } - } - - printf("\n"); - - return rc; -} - -/* Sector size is usually 4k, though Macronix eliteflash has 64k */ -int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_SE_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_SE, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - return result; - } - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 15-800 ms, so wait in 10 ms steps. - */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(10 * 1000); - if (check_erased_range(flash, addr, blocklen)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - if ((addr != 0) || (blocklen != flash->total_size * 1024)) { - fprintf(stderr, "%s called with incorrect arguments\n", - __func__); - return -1; - } - return spi_chip_erase_60(flash); -} - -int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ - if ((addr != 0) || (blocklen != flash->total_size * 1024)) { - fprintf(stderr, "%s called with incorrect arguments\n", - __func__); - return -1; - } - return spi_chip_erase_c7(flash); -} - -int spi_write_status_enable(void) -{ - const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; - int result; - - /* Send EWSR (Enable Write Status Register). */ - result = spi_send_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); - - if (result) - fprintf(stderr, "%s failed\n", __func__); - - return result; -} - -/* - * This is according the SST25VF016 datasheet, who knows it is more - * generic that this... - */ -int spi_write_status_register(int status) -{ - int result; - struct spi_command cmds[] = { - { - /* FIXME: WRSR requires either EWSR or WREN depending on chip type. */ - .writecnt = JEDEC_EWSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_EWSR }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_WRSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); - } - return result; -} - -int spi_byte_program(int addr, uint8_t databyte) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BYTE_PROGRAM, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff), databyte }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -int spi_nbyte_program(int addr, uint8_t *bytes, int len) -{ - int result; - /* FIXME: Switch to malloc based on len unless that kills speed. */ - unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = { - JEDEC_BYTE_PROGRAM, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr >> 0) & 0xff, - }; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len, - .writearr = cmd, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - if (!len) { - fprintf(stderr, "%s called for zero-length write\n", __func__); - return 1; - } - if (len > 256) { - fprintf(stderr, "%s called for too long a write\n", __func__); - return 1; - } - - memcpy(&cmd[4], bytes, len); - - result = spi_send_multicommand(cmds); - if (result) { - fprintf(stderr, "%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - -int spi_disable_blockprotect(void) -{ - uint8_t status; - int result; - - status = spi_read_status_register(); - /* If there is block protection in effect, unprotect it first. */ - if ((status & 0x3c) != 0) { - printf_debug("Some block protection in effect, disabling\n"); - result = spi_write_status_register(status & ~0x3c); - if (result) { - fprintf(stderr, "spi_write_status_register failed\n"); - return result; - } - } - return 0; -} - -int spi_nbyte_read(int address, uint8_t *bytes, int len) -{ - const unsigned char cmd[JEDEC_READ_OUTSIZE] = { - JEDEC_READ, - (address >> 16) & 0xff, - (address >> 8) & 0xff, - (address >> 0) & 0xff, - }; - - /* Send Read */ - return spi_send_command(sizeof(cmd), len, cmd, bytes); -} - -/* - * Read a complete flash chip. - * Each page is read separately in chunks with a maximum size of chunksize. - */ -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) -{ - int rc = 0; - int i, j, starthere, lenhere; - int page_size = flash->page_size; - int toread; - - /* Warning: This loop has a very unusual condition and body. - * The loop needs to go through each page with at least one affected - * byte. The lowest page number is (start / page_size) since that - * division rounds down. The highest page number we want is the page - * where the last byte of the range lives. That last byte has the - * address (start + len - 1), thus the highest page number is - * (start + len - 1) / page_size. Since we want to include that last - * page as well, the loop condition uses <=. - */ - for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { - /* Byte position of the first byte in the range in this page. */ - /* starthere is an offset to the base address of the chip. */ - starthere = max(start, i * page_size); - /* Length of bytes in the range in this page. */ - lenhere = min(start + len, (i + 1) * page_size) - starthere; - for (j = 0; j < lenhere; j += chunksize) { - toread = min(chunksize, lenhere - j); - rc = spi_nbyte_read(starthere + j, buf + starthere - start + j, toread); - if (rc) - break; - } - if (rc) - break; - } - - return rc; -} - int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) { if (!spi_programmer[spi_controller].read) { @@ -1057,36 +191,6 @@ } /* - * Program chip using byte programming. (SLOW!) - * This is for chips which can only handle one byte writes - * and for chips where memory mapped programming is impossible - * (e.g. due to size constraints in IT87* for over 512 kB) - */ -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf) -{ - int total_size = 1024 * flash->total_size; - int i, result = 0; - - spi_disable_blockprotect(); - /* Erase first */ - printf("Erasing flash before programming... "); - if (erase_flash(flash)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - printf("done.\n"); - for (i = 0; i < total_size; i++) { - result = spi_byte_program(i, buf[i]); - if (result) - return 1; - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(10); - } - - return 0; -} - -/* * Program chip using page (256 bytes) programming. * Some SPI masters can't do this, they use single byte programming instead. */ @@ -1106,41 +210,3 @@ /* Need to return BBAR for ICH chipsets. */ return 0; } - -int spi_aai_write(struct flashchip *flash, uint8_t *buf) -{ - uint32_t pos = 2, size = flash->total_size * 1024; - unsigned char w[6] = {0xad, 0, 0, 0, buf[0], buf[1]}; - int result; - - switch (spi_controller) { -#if INTERNAL_SUPPORT == 1 - case SPI_CONTROLLER_WBSIO: - fprintf(stderr, "%s: impossible with Winbond SPI masters," - " degrading to byte program\n", __func__); - return spi_chip_write_1(flash, buf); -#endif - default: - break; - } - if (erase_flash(flash)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - /* FIXME: This will fail on ICH/VIA SPI. */ - result = spi_write_enable(); - if (result) - return result; - spi_send_command(6, 0, w, NULL); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(5); /* SST25VF040B Tbp is max 10us */ - while (pos < size) { - w[1] = buf[pos++]; - w[2] = buf[pos++]; - spi_send_command(3, 0, w, NULL); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(5); /* SST25VF040B Tbp is max 10us */ - } - spi_write_disable(); - return 0; -} Copied and modified: trunk/spi25.c (from r913, trunk/spi.c) ============================================================================== --- trunk/spi.c Thu Feb 25 12:38:23 2010 (r913, copy source) +++ trunk/spi25.c Fri Feb 26 06:48:29 2010 (r914) @@ -19,165 +19,17 @@ */ /* - * Contains the generic SPI framework + * Contains the common SPI chip driver functions */ #include <string.h> #include "flash.h" #include "flashchips.h" +#include "chipdrivers.h" #include "spi.h" -enum spi_controller spi_controller = SPI_CONTROLLER_NONE; -void *spibar = NULL; - void spi_prettyprint_status_register(struct flashchip *flash); -const struct spi_programmer spi_programmer[] = { - { /* SPI_CONTROLLER_NONE */ - .command = NULL, - .multicommand = NULL, - .read = NULL, - .write_256 = NULL, - }, - -#if INTERNAL_SUPPORT == 1 - { /* SPI_CONTROLLER_ICH7 */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_ICH9 */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_IT87XX */ - .command = it8716f_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = it8716f_spi_chip_read, - .write_256 = it8716f_spi_chip_write_256, - }, - - { /* SPI_CONTROLLER_SB600 */ - .command = sb600_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = sb600_spi_read, - .write_256 = sb600_spi_write_1, - }, - - { /* SPI_CONTROLLER_VIA */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_WBSIO */ - .command = wbsio_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = wbsio_spi_read, - .write_256 = wbsio_spi_write_1, - }, -#endif - -#if FT2232_SPI_SUPPORT == 1 - { /* SPI_CONTROLLER_FT2232 */ - .command = ft2232_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = ft2232_spi_read, - .write_256 = ft2232_spi_write_256, - }, -#endif - -#if DUMMY_SUPPORT == 1 - { /* SPI_CONTROLLER_DUMMY */ - .command = dummy_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = NULL, - .write_256 = NULL, - }, -#endif - -#if BUSPIRATE_SPI_SUPPORT == 1 - { /* SPI_CONTROLLER_BUSPIRATE */ - .command = buspirate_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = buspirate_spi_read, - .write_256 = spi_chip_write_1, - }, -#endif - -#if DEDIPROG_SUPPORT == 1 - { /* SPI_CONTROLLER_DEDIPROG */ - .command = dediprog_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = dediprog_spi_read, - .write_256 = spi_chip_write_1, - }, -#endif - - {}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */ -}; - -const int spi_programmer_count = ARRAY_SIZE(spi_programmer); - -int spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) -{ - if (!spi_programmer[spi_controller].command) { - fprintf(stderr, "%s called, but SPI is unsupported on this " - "hardware. Please report a bug.\n", __func__); - return 1; - } - - return spi_programmer[spi_controller].command(writecnt, readcnt, - writearr, readarr); -} - -int spi_send_multicommand(struct spi_command *cmds) -{ - if (!spi_programmer[spi_controller].multicommand) { - fprintf(stderr, "%s called, but SPI is unsupported on this " - "hardware. Please report a bug.\n", __func__); - return 1; - } - - return spi_programmer[spi_controller].multicommand(cmds); -} - -int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) -{ - struct spi_command cmd[] = { - { - .writecnt = writecnt, - .readcnt = readcnt, - .writearr = writearr, - .readarr = readarr, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - return spi_send_multicommand(cmd); -} - -int default_spi_send_multicommand(struct spi_command *cmds) -{ - int result = 0; - for (; (cmds->writecnt || cmds->readcnt) && !result; cmds++) { - result = spi_send_command(cmds->writecnt, cmds->readcnt, - cmds->writearr, cmds->readarr); - } - return result; -} - static int spi_rdid(unsigned char *readarr, int bytes) { const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID }; @@ -654,7 +506,12 @@ .readarr = NULL, }, { .writecnt = JEDEC_BE_52_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_52, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, + .writearr = (const unsigned char[]){ + JEDEC_BE_52, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, .readcnt = 0, .readarr = NULL, }, { @@ -698,7 +555,12 @@ .readarr = NULL, }, { .writecnt = JEDEC_BE_D8_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_D8, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, + .writearr = (const unsigned char[]){ + JEDEC_BE_D8, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, .readcnt = 0, .readarr = NULL, }, { @@ -740,7 +602,12 @@ .readarr = NULL, }, { .writecnt = JEDEC_BE_D7_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BE_D7, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, + .writearr = (const unsigned char[]){ + JEDEC_BE_D7, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, .readcnt = 0, .readarr = NULL, }, { @@ -803,7 +670,12 @@ .readarr = NULL, }, { .writecnt = JEDEC_SE_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_SE, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) }, + .writearr = (const unsigned char[]){ + JEDEC_SE, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, .readcnt = 0, .readarr = NULL, }, { @@ -910,7 +782,13 @@ .readarr = NULL, }, { .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_BYTE_PROGRAM, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff), databyte }, + .writearr = (const unsigned char[]){ + JEDEC_BYTE_PROGRAM, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff), + databyte + }, .readcnt = 0, .readarr = NULL, }, { @@ -1045,17 +923,6 @@ return rc; } -int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) -{ - if (!spi_programmer[spi_controller].read) { - fprintf(stderr, "%s called, but SPI read is unsupported on this" - " hardware. Please report a bug.\n", __func__); - return 1; - } - - return spi_programmer[spi_controller].read(flash, buf, start, len); -} - /* * Program chip using byte programming. (SLOW!) * This is for chips which can only handle one byte writes @@ -1086,27 +953,6 @@ return 0; } -/* - * Program chip using page (256 bytes) programming. - * Some SPI masters can't do this, they use single byte programming instead. - */ -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf) -{ - if (!spi_programmer[spi_controller].write_256) { - fprintf(stderr, "%s called, but SPI page write is unsupported " - " on this hardware. Please report a bug.\n", __func__); - return 1; - } - - return spi_programmer[spi_controller].write_256(flash, buf); -} - -uint32_t spi_get_valid_read_addr(void) -{ - /* Need to return BBAR for ICH chipsets. */ - return 0; -} - int spi_aai_write(struct flashchip *flash, uint8_t *buf) { uint32_t pos = 2, size = flash->total_size * 1024; Modified: trunk/sst28sf040.c ============================================================================== --- trunk/sst28sf040.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/sst28sf040.c Fri Feb 26 06:48:29 2010 (r914) @@ -21,6 +21,7 @@ */ #include "flash.h" +#include "chipdrivers.h" #define AUTO_PG_ERASE1 0x20 #define AUTO_PG_ERASE2 0xD0 Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/sst49lfxxxc.c Fri Feb 26 06:48:29 2010 (r914) @@ -22,6 +22,7 @@ #include <stdlib.h> #include "flash.h" +#include "chipdrivers.h" #define SECTOR_ERASE 0x30 #define BLOCK_ERASE 0x20 Modified: trunk/sst_fwhub.c ============================================================================== --- trunk/sst_fwhub.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/sst_fwhub.c Fri Feb 26 06:48:29 2010 (r914) @@ -25,6 +25,7 @@ #include <stdlib.h> #include <string.h> #include "flash.h" +#include "chipdrivers.h" // I need that Berkeley bit-map printer void print_sst_fwhub_status(uint8_t status) Modified: trunk/stm50flw0x0x.c ============================================================================== --- trunk/stm50flw0x0x.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/stm50flw0x0x.c Fri Feb 26 06:48:29 2010 (r914) @@ -31,6 +31,7 @@ #include <stdlib.h> #include "flash.h" #include "flashchips.h" +#include "chipdrivers.h" static void wait_stm50flw0x0x(chipaddr bios) { Modified: trunk/w29ee011.c ============================================================================== --- trunk/w29ee011.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/w29ee011.c Fri Feb 26 06:48:29 2010 (r914) @@ -20,6 +20,7 @@ #include <string.h> #include "flash.h" +#include "chipdrivers.h" int probe_w29ee011(struct flashchip *flash) { Modified: trunk/w39v040c.c ============================================================================== --- trunk/w39v040c.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/w39v040c.c Fri Feb 26 06:48:29 2010 (r914) @@ -19,6 +19,7 @@ */ #include "flash.h" +#include "chipdrivers.h" int probe_w39v040c(struct flashchip *flash) { Modified: trunk/w39v080fa.c ============================================================================== --- trunk/w39v080fa.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/w39v080fa.c Fri Feb 26 06:48:29 2010 (r914) @@ -19,6 +19,7 @@ */ #include "flash.h" +#include "chipdrivers.h" static int unlock_block_winbond_fwhub(struct flashchip *flash, int offset) { Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Thu Feb 25 12:38:23 2010 (r913) +++ trunk/wbsio_spi.c Fri Feb 26 06:48:29 2010 (r914) @@ -20,6 +20,7 @@ #include <string.h> #include "flash.h" +#include "chipdrivers.h" #include "spi.h" #define WBSIO_PORT1 0x2e

1 0

p4b533-e flashrom fail bosss@irc not urgent anymore, flashed with uniflash
by gdocs123 123 25 Feb '10

25 Feb '10

I got the "other firmware p4p800se-deluxe" flashed succesfully using the socket from p4b533e motherboard by using the uniflash2.05b tool on a dos startup floppy made in windows xp. Maybe in 'distant' future I can try flashing with a newer version of flashrom if I want to take risks... like maybe try a beta bios etc... but for a couple of weeks / months I keep it this way. Here is some output info for my board asked on IRC, I hope it will help you with the development of flashrom. Thanks for the support and input sofar. If you like I can also sent you output info of p4p800s-e "deluxe" which is fixed btw. grtz Walter

1 0

Re: [flashrom] [PATCH] Rename identifiers called 'byte'
by Carl-Daniel Hailfinger 25 Feb '10

25 Feb '10

On 25.02.2010 11:50, Michael Karcher wrote: > Still fallout of adding "-Wshadow". Missed the ht1000 one > (chipset_enable is not compied on Windows where we had the collision > with "byte" last time) and the other occurrence is newly introduced. > Old libpci defines a global symbol called "byte" too. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > No objection from a technical POV, but I really dislike the name lpc_8a. I don't have a good suggestion for a better variable name, though. Maybe mcp_bustype? Oh well. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

2 3

[commit] r913 - trunk
by repository service 25 Feb '10

25 Feb '10

Author: mkarcher Date: Thu Feb 25 12:38:23 2010 New Revision: 913 URL: http://flashrom.org/trac/coreboot/changeset/913 Log: Rename identifiers called 'byte' Still fallout of adding "-Wshadow". Missed the ht1000 one (chipset_enable is not compied on Windows where we had the collision with "byte" last time) and the other occurrence is newly introduced. Old libpci defines a global symbol called "byte" too. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Wed Feb 24 23:43:44 2010 (r912) +++ trunk/chipset_enable.c Thu Feb 25 12:38:23 2010 (r913) @@ -1060,7 +1060,7 @@ static int enable_flash_mcp6x_7x_common(struct pci_dev *dev, const char *name) { int ret = 0; - uint8_t byte; + uint8_t val; uint16_t status; char *busname; uint32_t mcp_spibaraddr; @@ -1070,10 +1070,10 @@ msg_pinfo("This chipset is not really supported yet. Guesswork...\n"); /* dev is the ISA bridge. No idea what the stuff below does. */ - byte = pci_read_byte(dev, 0x8a); + val = pci_read_byte(dev, 0x8a); msg_pdbg("ISA/LPC bridge reg 0x8a contents: 0x%02x, bit 6 is %i, bit 5 " - "is %i\n", byte, (byte >> 6) & 0x1, (byte >> 5) & 0x1); - switch ((byte >> 5) & 0x3) { + "is %i\n", val, (val >> 6) & 0x1, (val >> 5) & 0x1); + switch ((val >> 5) & 0x3) { case 0x0: buses_supported = CHIP_BUSTYPE_LPC; break; @@ -1090,9 +1090,9 @@ /* Force enable SPI and disable LPC? Not a good idea. */ #if 0 - byte |= (1 << 6); - byte &= ~(1 << 5); - pci_write_byte(dev, 0x8a, byte); + val |= (1 << 6); + val &= ~(1 << 5); + pci_write_byte(dev, 0x8a, val); #endif /* Look for the SMBus device (SMBus PCI class) */ @@ -1224,16 +1224,16 @@ static int enable_flash_ht1000(struct pci_dev *dev, const char *name) { - uint8_t byte; + uint8_t val; /* Set the 4MB enable bit. */ - byte = pci_read_byte(dev, 0x41); - byte |= 0x0e; - pci_write_byte(dev, 0x41, byte); - - byte = pci_read_byte(dev, 0x43); - byte |= (1 << 4); - pci_write_byte(dev, 0x43, byte); + val = pci_read_byte(dev, 0x41); + val |= 0x0e; + pci_write_byte(dev, 0x41, val); + + val = pci_read_byte(dev, 0x43); + val |= (1 << 4); + pci_write_byte(dev, 0x43, val); return 0; }

1 0

[PATCH] Rename identifiers called 'byte'
by Michael Karcher 25 Feb '10

25 Feb '10

Still fallout of adding "-Wshadow". Missed the ht1000 one (chipset_enable is not compied on Windows where we had the collision with "byte" last time) and the other occurrence is newly introduced. Old libpci defines a global symbol called "byte" too. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- chipset_enable.c | 28 ++++++++++++++-------------- 1 files changed, 14 insertions(+), 14 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index 1830eb2..4182faa 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1060,7 +1060,7 @@ static int enable_flash_mcp55(struct pci_dev *dev, const char *name) static int enable_flash_mcp6x_7x_common(struct pci_dev *dev, const char *name) { int ret = 0; - uint8_t byte; + uint8_t lpc_8a; uint16_t status; char *busname; uint32_t mcp_spibaraddr; @@ -1070,10 +1070,10 @@ static int enable_flash_mcp6x_7x_common(struct pci_dev *dev, const char *name) msg_pinfo("This chipset is not really supported yet. Guesswork...\n"); /* dev is the ISA bridge. No idea what the stuff below does. */ - byte = pci_read_byte(dev, 0x8a); + lpc_8a = pci_read_byte(dev, 0x8a); msg_pdbg("ISA/LPC bridge reg 0x8a contents: 0x%02x, bit 6 is %i, bit 5 " - "is %i\n", byte, (byte >> 6) & 0x1, (byte >> 5) & 0x1); - switch ((byte >> 5) & 0x3) { + "is %i\n", lpc_8a, (lpc_8a >> 6) & 0x1, (lpc_8a >> 5) & 0x1); + switch ((lpc_8a >> 5) & 0x3) { case 0x0: buses_supported = CHIP_BUSTYPE_LPC; break; @@ -1090,9 +1090,9 @@ static int enable_flash_mcp6x_7x_common(struct pci_dev *dev, const char *name) /* Force enable SPI and disable LPC? Not a good idea. */ #if 0 - byte |= (1 << 6); - byte &= ~(1 << 5); - pci_write_byte(dev, 0x8a, byte); + lpc_8a |= (1 << 6); + lpc_8a &= ~(1 << 5); + pci_write_byte(dev, 0x8a, lpc_8a); #endif /* Look for the SMBus device (SMBus PCI class) */ @@ -1224,16 +1224,16 @@ static int enable_flash_mcp7x(struct pci_dev *dev, const char *name) static int enable_flash_ht1000(struct pci_dev *dev, const char *name) { - uint8_t byte; + uint8_t val; /* Set the 4MB enable bit. */ - byte = pci_read_byte(dev, 0x41); - byte |= 0x0e; - pci_write_byte(dev, 0x41, byte); + val = pci_read_byte(dev, 0x41); + val |= 0x0e; + pci_write_byte(dev, 0x41, val); - byte = pci_read_byte(dev, 0x43); - byte |= (1 << 4); - pci_write_byte(dev, 0x43, byte); + val = pci_read_byte(dev, 0x43); + val |= (1 << 4); + pci_write_byte(dev, 0x43, val); return 0; } -- 1.6.5

1 0

Request for ideas: Asus as99127f sensor chip on I2C protects flash!
by Michael Karcher 24 Feb '10

24 Feb '10

Hello flashrom people, I have a confirmed report now that unlocking of some Asus boards (most likely many Asus boards with the VIA VT82C686 south bridge "Apollo Super South") needs i2c communication with the custom hardware sensor interface chip named as99127f, which is a derivate of the winbond w83782d, which is supported by the w83781d module. Contrary to the Winbond chip, the Asus chip is *only* reachable via I2C, connected to the I2C port of the south bridge, no ISA interface. And it has a register at I2C address 0x80 in bank one (accessed using the first subdevice) that contains a flash write protect bit. The original w83782d has no register addresses above 0x7f. Here some logs from an Asus A7V133 board: State after reboot: Parallel flash accepts no write cycles http://coreboot.pastebin.com/m2801f3ff Using i2cget (from i2c-tools), after loading i2c-dev module and unloading w83781d (to prevent contention) http://coreboot.pastebin.com/f1255a2cc Flash protect is bit 3, so clearing this bit and running flashrom again makes the chip visible: http://coreboot.pastebin.com/f35e34cf3 How do we approach these boards? 1) Direct port access of the i2c bus in the south bridge: is a bad idea, as it might conflict with the i2c driver from the OS. 2) OS specific general i2c access: Probably working, but might interfere with hardware monitor drivers that try to access the same chip. i2c support has to be added for each OS. 3) Chip-specific driver for enabling flashing: In Linux this means adding a "flash_protect" sysfs property in the w83781d driver if the Asus chip is detect. Definitely the most clean way on linux, but needs a kernel patch, which OTOH should be easy to get into new kernels, but still makes them a prerequisite of running flashrom on these boards. No idea about non-Linux systems. Regards, Michael Karcher

2 2

Re: [flashrom] [PATCH 1/3] Remove unused short IDs
by Carl-Daniel Hailfinger 24 Feb '10

24 Feb '10

On 24.02.2010 14:28, Michael Karcher wrote: > This also replaces the meaningless numbers in the DMI debug printout > with the parameter names. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Thanks for the cleanup. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

2 1

[commit] r912 - trunk
by repository service 24 Feb '10

24 Feb '10

Author: mkarcher Date: Wed Feb 24 23:43:44 2010 New Revision: 912 URL: http://flashrom.org/trac/coreboot/changeset/912 Log: Remove unused short IDs This also replaces the meaningless numbers in the DMI debug printout with the parameter names. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dmi.c Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Wed Feb 24 01:04:40 2010 (r911) +++ trunk/dmi.c Wed Feb 24 23:43:44 2010 (r912) @@ -36,16 +36,13 @@ /* The short_id for baseboard starts with "m" as in mainboard to leave "b" available for BIOS */ -struct { - const char *dmidecode_name; - char short_id[3]; -} dmi_properties[DMI_ID_INVALID] = { - {"system-manufacturer", "sm"}, - {"system-product-name", "sp"}, - {"system-version", "sv"}, - {"baseboard-manufacturer", "mm"}, - {"baseboard-product-name", "mp"}, - {"baseboard-version", "mv"} +const char *dmidecode_names[DMI_ID_INVALID] = { + "system-manufacturer", + "system-product-name", + "system-version", + "baseboard-manufacturer", + "baseboard-product-name", + "baseboard-version" }; #define DMI_COMMAND_LEN_MAX 260 @@ -71,8 +68,7 @@ { char commandline[DMI_COMMAND_LEN_MAX+40]; snprintf(commandline, sizeof(commandline), - "%s -s %s", dmidecode_command, - dmi_properties[i].dmidecode_name); + "%s -s %s", dmidecode_command, dmidecode_names[i]); dmidecode_pipe = popen(commandline, "r"); if (!dmidecode_pipe) { @@ -100,7 +96,8 @@ if (answerbuf[0] != 0 && answerbuf[strlen(answerbuf) - 1] == '\n') answerbuf[strlen(answerbuf) - 1] = 0; - printf_debug("DMI string %d: \"%s\"\n", i, answerbuf); + printf_debug("DMI string %s: \"%s\"\n", dmidecode_names[i], + answerbuf); dmistrings[i] = strdup(answerbuf); } has_dmi_support = 1;

1 0

Re: [flashrom] [PATCH 2/3] Factor out DMI string reading into subfunction
by Carl-Daniel Hailfinger 24 Feb '10

24 Feb '10

On 24.02.2010 14:28, Michael Karcher wrote: > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Looks OK, but I'm in a hurry and couldn't check too thorougly. I need to regenerate the diff with ignored whitespace to see the real changes. Will do so later. Right now, only a small coding style comment: You have if (condition) { block } in a few places. AFAIK flashrom coding style has the opening brace on the same line as the if/do/switch statement. The only "standalone" opening braces are those of functions. Regards, Carl-Daniel -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

1 0

Working: Tyan Tempest i5000PW S5382
by Rob Lazzurs 24 Feb '10

24 Feb '10

Hello, I have just used flashrom to update the above motherboard and this worked as expected with a little help from twice11 on the IRC channel. Thanks again for the excellent software, if any further information is required please just let me know. Kind regards. -- Rob Lazzurs | Senior Systems Administrator | TomTom Dynamic Content & Publishing | robert.lazzurs(a)tomtom.com | +44 (0) 131 445 6065 office

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom