flashrom

flashrom@flashrom.org

5 participants
9161 discussions

[patch] EPoX EP-8NPA7I board enable
by Jonathan A. Kollasch 19 Oct '10

19 Oct '10

Add board enable for EPoX EP-8NPA7I (and possibly other similar EPoX boards). Also, spelling correction. Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net> ---

4 8

FOSDEM devroom request
by Rudolf Marek 17 Oct '10

17 Oct '10

Hi all, I have written following to the devroom request. Thanks. Rudolf Hello, We would like to ask for common devroom for both collaborating projects - Coreboot and Flashrom. Coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) you can find in most of today's computers. Flashrom is a utility for identifying, reading, writing, verifying and erasing flash chips. It is designed to flash BIOS/EFI/coreboot/firmware/optionROM images on mainboards, network/graphics/storage controller cards, and various programmer devices. Both projects are closely related, for example, the Coreboot uses Flashrom to write the images. Both attract people which like the hardware and close to the hardware system programming. On the last FOSDEM there was a Coreboot devroom. Flashrom presented itself only during Carl Daniel's lightning talk. This year is a great opportunity for both projects to share a common devroom to attract hardware oriented people together. As for the devroom topic, we would like to offer more hands-on sessions and kind of mini lectures explaining various parts of non-trivial problematics which both project face. If one judges the last year Coreboot devroom attendance, we had all the time full room, which was nice although we prepared "just" lectures about the project (with demo) and "how stuff works" oriented lectures. Our aim for this year is to bring both projects even closer to potential users or developers using above mentioned more individual approach. We would also like to apply for the main talk track to catch an attention of completely new users or developers which never heard of our projects. The intended topic of the talk would be more general and serve as the introduction to this interesting part of computer hardware & software.

2 2

write on XFX 680i sli lt
by hoshimaru 16 Oct '10

16 Oct '10

Hello, I successfully tested the write operation for "SST SST49LF040B" on an XFX 680i sli lt mainboard. flashrom output: ____________________________________________________________________________________________________ flashrom v0.9.3-r1213 on Linux 2.6.35-ARCH (i686), built with libpci 3.1.7, GCC 4.5.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2664M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10011 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " XFX " DMI string system-product-name: "XFX Nforce 680i LT" DMI string system-version: "1" DMI string baseboard-manufacturer: " XFX " DMI string baseboard-product-name: "XFX Nforce 680i LT" DMI string baseboard-version: "1" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP55", enabling flash write... chipset PCI ID is 10de:0360, OK. This chipset supports the following protocols: Non-SPI. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Bright BM29F040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Hyundai HY29F040A, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Intel 28F001BN/BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: probe_82802ab: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Found chip "SST SST49LF040B" (512 KB, LPC) at physical address 0xfff80000. Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe9, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x6b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xca, id2 0x62, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W29C020(C)/W29C022, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W29C040/P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040(F)B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040(F)C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x50 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling checks. Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, SUCCESS. Writing flash chip... COMPLETE. Verifying flash... VERIFIED. __________________________________________________________________________________________________ Regards, Stefan

1 0

my mother asus m2n-mx-se
by gmail 16 Oct '10

16 Oct '10

my error file sorry my bad english ------------------------------------------------------------------------------------------------------------------------------------------------------------- flashrom v0.9.3-r1213 on Linux 2.6.35-ARCH (x86_64), built with libpci 3.1.7, GCC 4.5.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1051M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1005 us, 10000 myus = 10019 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N-MX SE" DMI string baseboard-version: "Rev x.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712. Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e0, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x54, id2 0x1d, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x54, id2 0x1d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x54, id2 0x1d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040(F)B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040(F)C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x54, id2 0x1d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.

1 0

[commit] r1213 - trunk
by repository service 16 Oct '10

16 Oct '10

Author: uwe Date: Sat Oct 16 01:02:15 2010 New Revision: 1213 URL: http://flashrom.org/trac/flashrom/changeset/1213 Log: Add a board enable for the EPoX EP-8NPA7I board. Also, spelling correction. Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Oct 15 02:01:14 2010 (r1212) +++ trunk/board_enable.c Sat Oct 16 01:02:15 2010 (r1213) @@ -947,6 +947,15 @@ /* * Suited for: + * - EPoX EP-8NPAI: NVIDIA nForce4 4X + */ +static int nvidia_mcp_gpio4_raise(void) +{ + return nvidia_mcp_gpio_set(0x04, 1); +} + +/* + * Suited for: * - HP xw9400 (Tyan S2915-E OEM): Dual(!) NVIDIA MCP55 * * Notes: a) There are two MCP55 chips, so also two SMBus bridges on that @@ -1922,6 +1931,7 @@ {0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, NULL}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, + {0x10DE, 0x005E, 0x1695, 0x1010, 0x10DE, 0x0050, 0x1695, 0x1010, NULL, NULL, NULL, "EPoX", "EP-8NPAI", 0, OK, nvidia_mcp_gpio4_raise}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", 0, NT, intel_piix4_gpo22_raise}, {0x8086, 0x2443, 0x8086, 0x2442, 0x8086, 0x1130, 0x8086, 0x1130, "^6IEM ", NULL, NULL, "GIGABYTE", "GA-6IEM", 0, NT, intel_ich_gpio25_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Oct 15 02:01:14 2010 (r1212) +++ trunk/print.c Sat Oct 16 01:02:15 2010 (r1213) @@ -449,6 +449,7 @@ B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), + B("EPoX", "EP-8NPAI", 1, NULL, NULL), B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),

1 0

HP Compaq 8510w BIOS
by Mario Lombardo 15 Oct '10

15 Oct '10

Hi, I just would like to let you know what are the results of using your tool on my notebook. I did not do anything - just executed the binary as root and verbose. Please see attached text file for the output. If you need more input or if you guess reading and writing is save, please let me know. Thanks! Cheers, Mario

1 0

flashrom.log DMI string system-manufacturer: "TsingHua TongFang Computer"
by Qian Hong 15 Oct '10

15 Oct '10

DMI string system-manufacturer: "TsingHua TongFang Computer" DMI string system-product-name: "K400" DMI string system-version: "REFERENCE" DMI string baseboard-manufacturer: "NVIDIA " DMI string baseboard-product-name: "MCP67" DMI string baseboard-version: "REFERENCE" DMI string chassis-type: "Desktop"

1 0

P4B533 details
by peter＠ddcrew.com 15 Oct '10

15 Oct '10

Official latest (non-beta) bios: http://dlsvr.asus.com/pub/ASUS/mb/sock478/p4b533/1015.zip Board name: P4B533

1 1

[PATCH] Clean up doit()
by Carl-Daniel Hailfinger 15 Oct '10

15 Oct '10

doit() is the monster function we split off from main() when we created cli_classic() and tried to introduce some abstraction. doit() is a poster child of WTFs on an astronomic scale. Make doit() marginally less bad by factoring out self-contained code. Should have no functional changes. The new code flow is designed to make partial writes easier to implement. Tests appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-doit_refactor/flashrom.c =================================================================== --- flashrom-doit_refactor/flashrom.c (Revision 1211) +++ flashrom-doit_refactor/flashrom.c (Arbeitskopie) @@ -1116,6 +1116,39 @@ return ret; } +int read_buf_from_file(unsigned char *buf, unsigned long size, char *filename) +{ + unsigned long numbytes; + FILE *image; + struct stat image_stat; + + if ((image = fopen(filename, "rb")) == NULL) { + perror(filename); + return 1; + } + if (fstat(fileno(image), &image_stat) != 0) { + perror(filename); + fclose(image); + return 1; + } + if (image_stat.st_size != size) { + msg_gerr("Error: Image size doesn't match\n"); + fclose(image); + return 1; + } + numbytes = fread(buf, 1, size, image); + if (fclose(image)) { + perror(filename); + return 1; + } + if (numbytes != size) { + msg_gerr("Error: Failed to read complete file. Got %ld bytes, " + "wanted %ld!\n", numbytes, size); + return 1; + } + return 0; +} + int write_buf_to_file(unsigned char *buf, unsigned long size, char *filename) { unsigned long numbytes; @@ -1514,8 +1547,6 @@ int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) { uint8_t *buf; - unsigned long numbytes; - FILE *image; int ret = 0; unsigned long size; @@ -1537,7 +1568,19 @@ } } - if (erase_it) { + /* Given the existence of read locks, we want to unlock for read, + * erase and write. + */ + if (flash->unlock) + flash->unlock(flash); + + if (read_it) { + ret = read_flash_to_file(flash, filename); + programmer_shutdown(); + return ret; + } + if (erase_it || write_it) { + /* Write needs erase. */ if (flash->tested & TEST_BAD_ERASE) { msg_cerr("Erase is not working on this chip. "); if (!force) { @@ -1548,34 +1591,9 @@ msg_cerr("Continuing anyway.\n"); } } - if (flash->unlock) - flash->unlock(flash); - - if (erase_flash(flash)) { - emergency_help_message(); - programmer_shutdown(); - return 1; - } - } else if (read_it) { - if (flash->unlock) - flash->unlock(flash); - - if (read_flash_to_file(flash, filename)) { - programmer_shutdown(); - return 1; - } - } else if (write_it) { - if (flash->tested & TEST_BAD_ERASE) { - msg_cerr("Erase is not working on this chip " - "and erase is needed for write. "); - if (!force) { - msg_cerr("Aborting.\n"); - programmer_shutdown(); - return 1; - } else { - msg_cerr("Continuing anyway.\n"); - } - } + /* FIXME: Check if at least one erase function exists. */ + } + if (write_it) { if (flash->tested & TEST_BAD_WRITE) { msg_cerr("Write is not working on this chip. "); if (!force) { @@ -1591,39 +1609,25 @@ programmer_shutdown(); return 1; } - if (flash->unlock) - flash->unlock(flash); - } - if (write_it || verify_it) { - struct stat image_stat; - if ((image = fopen(filename, "rb")) == NULL) { - perror(filename); + if (erase_it) { + if (erase_flash(flash)) { + emergency_help_message(); programmer_shutdown(); - exit(1); + return 1; } - if (fstat(fileno(image), &image_stat) != 0) { - perror(filename); + } + + if (write_it || verify_it) { + if (read_buf_from_file(buf, flash->total_size * 1024, filename)) { programmer_shutdown(); - exit(1); + return 1; } - if (image_stat.st_size != flash->total_size * 1024) { - msg_gerr("Error: Image size doesn't match\n"); - programmer_shutdown(); - exit(1); - } - numbytes = fread(buf, 1, size, image); #if CONFIG_INTERNAL == 1 show_id(buf, size, force); #endif - fclose(image); - if (numbytes != size) { - msg_gerr("Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size); - programmer_shutdown(); - return 1; - } } // This should be moved into each flash part's code to do it -- http://www.hailfinger.org/

2 3

[commit] r1212 - trunk
by repository service 15 Oct '10

15 Oct '10

Author: hailfinger Date: Fri Oct 15 02:01:14 2010 New Revision: 1212 URL: http://flashrom.org/trac/flashrom/changeset/1212 Log: doit() is the monster function we split off from main() when we created cli_classic() and tried to introduce some abstraction. doit() is a poster child of WTFs on an astronomic scale. Make doit() less bad by factoring out self-contained code. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Oct 14 00:26:56 2010 (r1211) +++ trunk/flashrom.c Fri Oct 15 02:01:14 2010 (r1212) @@ -1116,6 +1116,39 @@ return ret; } +int read_buf_from_file(unsigned char *buf, unsigned long size, char *filename) +{ + unsigned long numbytes; + FILE *image; + struct stat image_stat; + + if ((image = fopen(filename, "rb")) == NULL) { + perror(filename); + return 1; + } + if (fstat(fileno(image), &image_stat) != 0) { + perror(filename); + fclose(image); + return 1; + } + if (image_stat.st_size != size) { + msg_gerr("Error: Image size doesn't match\n"); + fclose(image); + return 1; + } + numbytes = fread(buf, 1, size, image); + if (fclose(image)) { + perror(filename); + return 1; + } + if (numbytes != size) { + msg_gerr("Error: Failed to read complete file. Got %ld bytes, " + "wanted %ld!\n", numbytes, size); + return 1; + } + return 0; +} + int write_buf_to_file(unsigned char *buf, unsigned long size, char *filename) { unsigned long numbytes; @@ -1507,123 +1540,109 @@ return cli_classic(argc, argv); } -/* This function signature is horrible. We need to design a better interface, - * but right now it allows us to split off the CLI code. - * Besides that, the function itself is a textbook example of abysmal code flow. +/* FIXME: This function signature needs to be improved once doit() has a better + * function signature. */ -int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) +int chip_safety_check(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) { - uint8_t *buf; - unsigned long numbytes; - FILE *image; - int ret = 0; - unsigned long size; - - size = flash->total_size * 1024; - buf = (uint8_t *) calloc(size, sizeof(char)); - if (!programmer_may_write && (write_it || erase_it)) { msg_perr("Write/erase is not working yet on your programmer in " "its current configuration.\n"); /* --force is the wrong approach, but it's the best we can do * until the generic programmer parameter parser is merged. */ - if (!force) { - msg_perr("Aborting.\n"); - programmer_shutdown(); + if (!force) return 1; - } else { - msg_cerr("Continuing anyway.\n"); - } + msg_cerr("Continuing anyway.\n"); } - if (erase_it) { - if (flash->tested & TEST_BAD_ERASE) { - msg_cerr("Erase is not working on this chip. "); - if (!force) { - msg_cerr("Aborting.\n"); - programmer_shutdown(); + if (read_it || erase_it || write_it || verify_it) { + /* Everything needs read. */ + if (flash->tested & TEST_BAD_READ) { + msg_cerr("Read is not working on this chip. "); + if (!force) return 1; - } else { - msg_cerr("Continuing anyway.\n"); - } - } - if (flash->unlock) - flash->unlock(flash); - - if (erase_flash(flash)) { - emergency_help_message(); - programmer_shutdown(); - return 1; + msg_cerr("Continuing anyway.\n"); } - } else if (read_it) { - if (flash->unlock) - flash->unlock(flash); - - if (read_flash_to_file(flash, filename)) { - programmer_shutdown(); + if (!flash->read) { + msg_cerr("flashrom has no read function for this " + "flash chip.\n"); return 1; } - } else if (write_it) { + } + if (erase_it || write_it) { + /* Write needs erase. */ if (flash->tested & TEST_BAD_ERASE) { - msg_cerr("Erase is not working on this chip " - "and erase is needed for write. "); - if (!force) { - msg_cerr("Aborting.\n"); - programmer_shutdown(); + msg_cerr("Erase is not working on this chip. "); + if (!force) return 1; - } else { - msg_cerr("Continuing anyway.\n"); - } + msg_cerr("Continuing anyway.\n"); } + /* FIXME: Check if at least one erase function exists. */ + } + if (write_it) { if (flash->tested & TEST_BAD_WRITE) { msg_cerr("Write is not working on this chip. "); - if (!force) { - msg_cerr("Aborting.\n"); - programmer_shutdown(); + if (!force) return 1; - } else { - msg_cerr("Continuing anyway.\n"); - } + msg_cerr("Continuing anyway.\n"); } if (!flash->write) { - msg_cerr("Error: flashrom has no write function for this flash chip.\n"); - programmer_shutdown(); + msg_cerr("flashrom has no write function for this " + "flash chip.\n"); return 1; } - if (flash->unlock) - flash->unlock(flash); + } + return 0; +} + +/* This function signature is horrible. We need to design a better interface, + * but right now it allows us to split off the CLI code. + * Besides that, the function itself is a textbook example of abysmal code flow. + */ +int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) +{ + uint8_t *buf; + int ret = 0; + unsigned long size; + if (chip_safety_check(flash, force, filename, read_it, write_it, erase_it, verify_it)) { + msg_cerr("Aborting.\n"); + programmer_shutdown(); + return 1; } - if (write_it || verify_it) { - struct stat image_stat; - if ((image = fopen(filename, "rb")) == NULL) { - perror(filename); - programmer_shutdown(); - exit(1); - } - if (fstat(fileno(image), &image_stat) != 0) { - perror(filename); + size = flash->total_size * 1024; + buf = (uint8_t *) calloc(size, sizeof(char)); + + /* Given the existence of read locks, we want to unlock for read, + * erase and write. + */ + if (flash->unlock) + flash->unlock(flash); + + if (read_it) { + ret = read_flash_to_file(flash, filename); + programmer_shutdown(); + return ret; + } + if (erase_it) { + if (erase_flash(flash)) { + emergency_help_message(); programmer_shutdown(); - exit(1); + return 1; } - if (image_stat.st_size != flash->total_size * 1024) { - msg_gerr("Error: Image size doesn't match\n"); + } + + if (write_it || verify_it) { + if (read_buf_from_file(buf, flash->total_size * 1024, filename)) { programmer_shutdown(); - exit(1); + return 1; } - numbytes = fread(buf, 1, size, image); #if CONFIG_INTERNAL == 1 show_id(buf, size, force); #endif - fclose(image); - if (numbytes != size) { - msg_gerr("Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size); - programmer_shutdown(); - return 1; - } } // This should be moved into each flash part's code to do it

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom