flashrom

flashrom@flashrom.org

5 participants
9154 discussions

Flashrom Test Report (+ DOS build)
by Howard Ho 16 Jan '21

16 Jan '21

Hi, I successfully read/wrote a BIOS image file to a MSI Z390-A PRO (MS-7B98) motherboard via both Linux and DOS builds of flashrom based on the master branch on Jan. 1, 2021. Attached are reports/logs. Also, I would like to report that the "buildbot archive" link for finding DOS bulids of flashrom linked on https://flashrom.org/Downloads is not working for me as I am not able to connect to that site (seems like https://buildbot.flashrom.org/ is no longer online). So I built for myself a copy of flashrom for DOS. After making some changes to the code, I was able to cross-compile for DOS on Linux. I used pciutils 3.6.4, which did not require the patch to cross-compile the pciutils library for DOS. I put my build steps as well as my tested PC findings at https://github.com/HowardHo2021/flashrom-DOS-port. Regards, Howard

1 1

GD25Q10 - Flash Log
by Sean Rhodes 15 Jan '21

15 Jan '21

Please see the attached flash log as chip reported as untested.

1 0

Opinions on it87spi.c hack to support IT8686E?
by Pete Smith 09 Jan '21

09 Jan '21

Hi, I have a a GIGABYTE GA-H270N-WIFI motherboard with DualBIOS feature. Flashrom 1.2 is unable to select between the two flash chips with dualbiosindex parameter, as the Super I/O chip (ITE IT8686E) is unsupported: "Super I/O ID 0x8686 is not on the list of flash-capable controllers." In a naive attempt, I just tried to add the chip ID to the list: --- a/it87spi.c +++ b/it87spi.c @@ -256,6 +256,7 @@ int init_superio_ite(void) case 0x8718: case 0x8720: case 0x8728: + case 0x8686: ret |= it87spi_probe(superios[i].port); break; default: This modification made flashrom able to select between the flash chips: # flashrom -p internal:dualbiosindex= DualBIOS: Selected chip: 0 # flashrom -p internal:dualbiosindex=1 DualBIOS: Selected chip: 1 # flashrom -p internal:dualbiosindex= DualBIOS: Selected chip: 1 Reading the flash content also seems to work: # flashrom -p internal:dualbiosindex=0 -r M_BIOS.bin Enabling flash write... SPI Configuration is locked down. Enabling hardware sequencing because some important opcode is locked. OK. DualBIOS: Selected chip: 0 Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading flash... done. # flashrom -p internal:dualbiosindex=1 -r B_BIOS.bin Enabling flash write... SPI Configuration is locked down. Enabling hardware sequencing because some important opcode is locked. OK. DualBIOS: Selected chip: 1 Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading flash... done. Comparing the two firmware dumps, I find the only difference is that M_BIOS.bin contains my current BIOS settings which B_BIOS.bin does not, so I'm quite sure that these dumps are actually from two different flash chips. However, if enabling verbose (-VV) output while reading flash, I also see this message, which I don't know if normal or not: "No IT87* serial flash segment enabled." I have not yet tried writing to any of the flash chips, as I would really appreciate if someone with more experience than me could comment on this modification first, and maybe highlight problems I'm not currently aware of? Thanks in advance. Best regards, Pete Smith

2 1

chipset Intel C226 is marked as untested
by Philippe Lefèvre 07 Jan '21

07 Jan '21

Hello, just curious about my ROM, I used flashrom to see what is in and would like, why not, replace it by a coreboot version, and let you know. It seems that it wouldn't work as enable flash write seems not working. My box is a DELL Precision T1700 Here is what I get : flashrom v0.9.9-r1954 on Linux 4.9.0-14-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found chipset "Intel C226". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000 /dev/mem mmap failed: Operation not permitted FAILED! FATAL ERROR! Error: Programmer initialization failed. Hope this can help Regards

1 0

Re: acer aspire 7750g
by Mohammed Salhi 06 Jan '21

06 Jan '21

Von meinem iPhone gesendet

1 0

Successfully tested flashrom linux_spi with FM25F02(A)
by André Plümer 05 Jan '21

05 Jan '21

Hello, if someone likes to update the wiki for FM25F02(A) :) Managed to read corrupted GT730 GPU-BIOS and write back original rom via raspberry pi 3 with rasbian buster. I had to git clone source + make + make install. apt-Version of flashrom (1.0) didn't know the FM25F02(A) flash-chip, but flashrom v1.2-174-g32f4cb4 worked. GPU now working again! I had to pad the original rom to fit the flash chip size. The Size in the error-message of flashrom was helpful for truncate-command (which in fact extends the file if a bigger size is given): [...] Error: Image size (168960 B) doesn't match the flash chip's size (262144 B)! pi@raspberrypi:~ $ cp -a pny_gt730_2g_orig.rom pny_gt730_2g_orig_extended.rom pi@raspberrypi:~ $ truncate -s 262144 pny_gt730_2g_orig_extended.rom pi@raspberrypi:~ $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0 -w pny_gt730_2g_orig_extended.rom flashrom v1.2-174-g32f4cb4 on Linux 5.4.79-v7+ (armv7l) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Using default 2000kHz clock. Use 'spispeed' parameter to override. Found Fudan flash chip "FM25F02(A)" (256 kB, SPI) on linux_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. -- ░░░░░░░░░░░░░░░░░░░ ░░█▀█░█▀█░█▀▀░█░█░░ ░░█▀█░█▀▀░█░█░█▄█░░ ░░▀░▀░▀░░░▀▀▀░▀░▀░░ ░░░░░░░░░░░░░░░░░░░ André Plümer genannt Woistpeter Fachinformatiker Systemintegration Studierender BA Gestaltung "Digital Media and Experiment" Fachhochschule Bielefeld https://apgw.de/fh

1 0

Please report this to flashrom@flashrom.org
by Matt Rixman 04 Jan '21

04 Jan '21

Hi, I'm the asker of this question: https://superuser.com/questions/1613342/why-do-windows-updates-make-linux-r… I was hoping to use `flashrom` to gather before/after dumps, which I can (hopefully) compare to get to the bottom of my problem. When I run: `sudo flashrom --programmer internal` I get this: --- begin output --- flashrom on Linux 4.19.0-13-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... FCH device found but SMBus revision 0x59 does not match known values. Please report this to flashrom(a)flashrom.org and include this log and the output of lspci -nnvx, thanks!. Could not determine chipset generation.PROBLEMS, continuing anyway No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. --- end output --- the output of lspci is attached. Thanks, Matt

2 1

w25q16jv
by Luis Martinez 03 Jan '21

03 Jan '21

need some help with erasing and writing to a w25q16jv . its not in the supported list but i was able to read from it by forcing it with a similar chip i force read using w25q16.v but i cant erase or write this is what it reads it at. Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: compare_id: id1 0xef, id2 0x7015 Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) on linux_spi. Probing for Generic Variable Size SPI chip, 64 kB: Probing for Generic unknown SPI chip (RDID), 0 kB: compare_id: id1 0xef, id2 0x7015 Probing for Generic unknown SPI chip (REMS), 0 kB: compare_id: id1 0xef, id2 0x14 Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI). btw i got three valid dumps

1 0

ps:
by msuzuqi＠posteo.net 03 Jan '21

03 Jan '21

By the way, PSU has just broken, right after I sent the previous email. Masaru Suzuqi

1 0

please check logs
by msuzuqi＠posteo.net 03 Jan '21

03 Jan '21

Hello, I have been failing to flash libreboot rom on a X200 with a Beaglebone external flashing. Please check logs and tell me what the cause do you think. I succeeded just once between the two logs. But this is not the first time succeeded. I mean I have been using the laptop for around a year with libreboot. thanks. Masaru Suzuqi -- To run a command as administrator (user "root"), use "sudo <command>". To become root use "sudo -i". See "man sudo_root" for details. trisquel@trisquel:~$ ssh debian(a)beaglebone.local The authenticity of host 'beaglebone.local (192.168.6.2)' can't be established. ECDSA key fingerprint is SHA256:7UPnDqxHhM/cTjLfwf3nuKfeZermAMP4AxOaUCARZpk. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'beaglebone.local,192.168.6.2' (ECDSA) to the list of known hosts. Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 02:41:43 2019 from 192.168.7.1 debian@beaglebone:~$ su Password: su: Authentication failure debian@beaglebone:~$ sudo config-pin P9.17 spi_cs [sudo] password for debian: debian@beaglebone:~$ sudo config-pin P9.18 spi_cs Invalid mode: spi_cs debian@beaglebone:~$ sudo config-pin P9.18 spi debian@beaglebone:~$ sudo config-pin P9.21 spi debian@beaglebone:~$ sudo config-pin P9.22 spi_sclk debian@beaglebone:~$ ls /dev/spides* ls: cannot access '/dev/spides*': No such file or directory debian@beaglebone:~$ sudo ls /dev/spides* ls: cannot access '/dev/spides*': No such file or directory debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0xcf, failed byte count from 0x00000000-0x007fffff: 0x17d9 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0x12fb Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x5f, failed byte count from 0x00003000-0x00003fff: 0xb7c ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x5da5 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0xc9c Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x2f45 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x3605 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x46, failed byte count from 0x00003000-0x00003fff: 0x6c0 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x47a3 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x56d9 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x3daaf Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x12066 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x43, failed byte count from 0x00003000-0x00003fff: 0x6a8 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x4292 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1507 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1564 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x40fe Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x41, failed byte count from 0x00000000-0x007fffff: 0xd9f1 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ -- flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x2978 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28fb Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ logout Connection to beaglebone.local closed. trisquel@trisquel:~$ ssh debian(a)beaglebone.local Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 02:40:49 2019 from 192.168.6.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28a5 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ logout Connection to beaglebone.local closed. trisquel@trisquel:~$ ssh debian(a)beaglebone.local Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 03:38:32 2019 from 192.168.6.1 debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo config-pin P9.17 spi_cs [sudo] password for debian: Sorry, try again. [sudo] password for debian: debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x1aa0 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x19bc Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo config-pin P9.17 spi_cs debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xec4 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xb48 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xa24 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xe29 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo config-pin P9.17 spi_cs debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000001! Expected=0xa5, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x11f8 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x8be85 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip...

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom