flashrom

flashrom@flashrom.org

7 participants
9163 discussions

Start a nNew thread

Supermicro X9SCA-F with Intel C204 chipset
by Michael Fuckner 10 Dec '11

10 Dec '11

I just tried to read Flash from Supermicros X9SCA-F, but it doesn't work. Anything else I should try? Regards, Michael!

2 1

"Intel H61" with PCI ID 8086:1c5c. including a verbose (-V) log
by Fabio 10 Dec '11

10 Dec '11

[studio@myhost ~]$ sudo flashrom -V flashrom v0.9.4-r1395 on Linux 3.0-rt (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2868M loops per second, 10 myus = 9 us, 100 myus = 98 us, 1000 myus = 972 us, 10000 myus = 10144 us, 4 myus = 6 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: comando não encontrado dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0001 (FREG2: Management Engine) 0x00001000-0x001fffff is read-write 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 No operations were specified. Restoring MMIO space at 0xb76fb8a0 Restoring MMIO space at 0xb76fb89c Restoring MMIO space at 0xb76fb898 Restoring MMIO space at 0xb76fb896 Restoring MMIO space at 0xb76fb894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 3

Re: [flashrom] P8H61 PRO
by Stefan Tauner 10 Dec '11

10 Dec '11

On Thu, 1 Dec 2011 01:45:03 +0600 Pavel Petrov <novoagansk(a)gmail.com> wrote: > 0x5C: 0x017f0001 (FREG2: Management Engine) > 0x00001000-0x0017ffff is locked Hello Pavel, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[PATCH] Cross-compilation fixes
by Carl-Daniel Hailfinger 09 Dec '11

09 Dec '11

Switch from host OS detection to target OS detection. Complain about unknown target OS/architecture. Disable annoying format string warnings on DJGPP. Native and cross-compilation now usually just require setting CC. Examples: make CC=i586-pc-msdosdjgpp-gcc make CC="clang -m64" make CC=i686-w64-mingw32-gcc I tested the following compilation types: i386 Linux native (gcc, clang) i386 Linux -> x86_64 Linux (clang) i386 Linux -> MinGW32 i386 Linux -> DJGPP I'd appreciate tests for: x86_64 Linux native MinGW native Cygwin native powerpc Linux native mips Linux native Mac OS X native *BSD native cross-compile for anything you want to test libpayload Please check if the final executable has the right type (arch/OS) and filename extension, and if make detects the right target arch/OS. I expect problems with Cygwin. Please check and report. There is a new target: "make libpayload" in case you don't want to specify all tools by hand. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-crosscompile/os.h =================================================================== --- flashrom-crosscompile/os.h (Revision 0) +++ flashrom-crosscompile/os.h (Revision 0) @@ -0,0 +1,58 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Header file for OS checking. + */ + +// Solaris +#if defined (__sun) && (defined(__i386) || defined(__amd64)) +#define __FLASHROM_OS__ "SunOS" +// OS X +#elif defined(__MACH__) && defined(__APPLE__) +#define __FLASHROM_OS__ "Darwin" +// FreeBSD +#elif defined(__FreeBSD__) +#define __FLASHROM_OS__ "FreeBSD" +// DragonFlyBSD +#elif defined(__DragonFly__) +#define __FLASHROM_OS__ "DragonFlyBSD" +// NetBSD +#elif defined(__NetBSD__) +#define __FLASHROM_OS__ "NetBSD" +// OpenBSD +#elif defined(__OpenBSD__) +#define __FLASHROM_OS__ "OpenBSD" +// DJGPP +#elif defined(__DJGPP__) +#define __FLASHROM_OS__ "DOS" +// MinGW (always has _WIN32 available) +#elif defined(__MINGW32__) +#define __FLASHROM_OS__ "MinGW" +// Cygwin (usually without _WIN32) +#elif defined( __CYGWIN__) +#define __FLASHROM_OS__ "Cygwin" +// libpayload +#elif defined(__LIBPAYLOAD__) +#define __FLASHROM_OS__ "libpayload" +// Linux +#elif defined(__linux__) +#define __FLASHROM_OS__ "Linux" +#endif +__FLASHROM_OS__ Index: flashrom-crosscompile/Makefile =================================================================== --- flashrom-crosscompile/Makefile (Revision 1471) +++ flashrom-crosscompile/Makefile (Arbeitskopie) @@ -37,27 +37,40 @@ CFLAGS += -Werror endif -# FIXME We have to differentiate between host and target OS architecture. -OS_ARCH ?= $(shell uname) -ifneq ($(OS_ARCH), SunOS) +# HOST_OS is only used to work around local toolchain issues. +HOST_OS ?= $(shell uname) +ifeq ($(HOST_OS), MINGW32_NT-5.1) +# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". +CC = gcc +endif +ifneq ($(HOST_OS), SunOS) STRIP_ARGS = -s endif -ifeq ($(OS_ARCH), Darwin) + +# Determine the destination processor architecture. +# IMPORTANT: The following line must be placed before TARGET_OS is ever used +# (of course), but should come after any lines setting CC because the line +# below uses CC itself. +override TARGET_OS := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) + +ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include # DirectHW framework can be found in the DirectHW library. LDFLAGS += -framework IOKit -framework DirectHW -L/opt/local/lib -L/usr/local/lib endif -ifeq ($(OS_ARCH), FreeBSD) +ifeq ($(TARGET_OS), FreeBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe CPPFLAGS += -I../libgetopt -I../libpci/include +# DJGPP has odd uint*_t definitions which cause lots of format string warnings. +CPPFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt LIBS += ../libgetopt/libgetopt.a # Bus Pirate and Serprog are not supported under DOS (missing serial support). @@ -84,9 +97,9 @@ endif endif -ifeq ($(OS_ARCH), MINGW32_NT-5.1) -# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". -CC = gcc +# FIXME: Should we check for Cygwin/MSVC as well? +ifeq ($(TARGET_OS), MinGW) +EXEC_SUFFIX := .exe # MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs(). CFLAGS += -Dffs=__builtin_ffs # libusb-win32/libftdi stuff is usually installed in /usr/local. @@ -166,10 +179,7 @@ endif endif -ifeq ($(OS_ARCH), libpayload) -CC:=CC=i386-elf-gcc lpgcc -AR:=i386-elf-ar -RANLIB:=i386-elf-ranlib +ifeq ($(TARGET_OS), libpayload) CPPFLAGS += -DSTANDALONE ifeq ($(CONFIG_DUMMY), yes) UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes @@ -202,10 +212,10 @@ # Determine the destination processor architecture. # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line -# below uses CC itself. In some cases we set CC based on OS_ARCH, see above. -override ARCH := $(strip $(shell LC_ALL=C $(CC) -E arch.h 2>/dev/null | grep -v '^\#')) +# below uses CC itself. +override ARCH := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E arch.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) -ifeq ($(ARCH), "ppc") +ifeq ($(ARCH), ppc) # There's no PCI port I/O support on PPC/PowerPC, yet. ifeq ($(CONFIG_NIC3COM), yes) UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes @@ -348,7 +358,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o -ifeq ($(ARCH),"x86") +ifeq ($(ARCH),x86) PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o wbsio_spi.o mcp6x_spi.o PROGRAMMER_OBJS += ichspi.o ich_descriptors.o else @@ -476,7 +486,7 @@ endif ifeq ($(NEED_NET), yes) -ifeq ($(OS_ARCH), SunOS) +ifeq ($(TARGET_OS), SunOS) LIBS += -lsocket endif endif @@ -485,18 +495,18 @@ CHECK_LIBPCI = yes FEATURE_CFLAGS += -D'NEED_PCI=1' PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o -ifeq ($(OS_ARCH), NetBSD) +ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. LIBS += -lpciutils -lpci # For (i386|x86_64)_iopl(2). LIBS += -l$(shell uname -p) else -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) # FIXME There needs to be a better way to do this LIBS += ../libpci/lib/libpci.a else LIBS += -lpci -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). LIBS += -l$(shell uname -m) endif @@ -564,11 +574,16 @@ echo "found." || ( echo "not found."; \ rm -f .test.c .test$(EXEC_SUFFIX); exit 1) @rm -f .test.c .test$(EXEC_SUFFIX) - @printf "ARCH is " + @printf "Target arch is " @# FreeBSD wc will output extraneous whitespace. - @echo $(ARCH)|wc -l|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + @echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ ( echo "unknown. Aborting."; exit 1) @printf "%s\n" '$(ARCH)' + @printf "Target OS is " + @# FreeBSD wc will output extraneous whitespace. + @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + ( echo "unknown. Aborting."; exit 1) + @printf "%s\n" '$(TARGET_OS)' define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ @@ -684,7 +699,9 @@ @echo Created $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 djgpp-dos: clean - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip WARNERROR=no OS_ARCH=DOS + make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip +libpayload: clean + make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib .PHONY: all clean distclean compiler pciutils features export tarball dos featuresavailable -- http://www.hailfinger.org/

3 3

Re: [flashrom] Question about using flash programmer for Dell BIOS
by Marcos Felipe Rasia de Mello 08 Dec '11

08 Dec '11

2011/12/8 Delyan Zhekov <d.zhekov(a)gmail.com> > Hello, I found your forum during the great search for answers of mine. It > all has to do with dell optiplex gx240 BIOS. The problem: I have to write a > BIOS file to a SST49LF004A-33-4C-NH chip using a flash programmer. I > downloaded the .exe file and extracted .hdr and .rom files from it and I > have no idea which to use with the programmer. I also found a tool > converting .hdr to .bin but the .bin file is more than 5MB in size. I am > totally lost. Could you give me a direction what file should I use with the > flash programmer. Thank you. > > Delyan Zhekov > > Run the Dell update utility in Windows (or Wine maybe) with "-writeromfile" and program the .rom file it will create. Marcos

1 0

Re: [flashrom] Question about using flash programmer for Dell BIOS
by Pete Batard 08 Dec '11

08 Dec '11

On 2011.12.08 16:36, Delyan Zhekov wrote: > I also found a tool converting .hdr to .bin What tool did you use? I remember looking for something like that some time ago, when I had to flash a GX BIOS from an HDR, but I wasn't able to locate one then. In the end, I had to fallback to using dellBiosUpdate, from smbios-utils on Linux, instead of flashrom :( > but the .bin file is more than 5MB > in size. I am totally lost. Could you give me a direction what file > should I use with the flash programmer. Thank you. I'm hoping someone else will be able to give directions on how to be able to use flashrom when provided with a Dell HDR file. In case they don't, you should still be able to flash an HDR using Ubuntu (eg. from a live CD) by doing something like this: o apt-get install smbios-utils firmware-addon-dell o retreive your HDR from network or USB o dellBiosUpdate --hdr <your_firmware.hdr> NB: you may have to issue an apt-get-update first and tweak the settings so that the Ubuntu repositories you fetch from include "Universe". Additional options for dellBiosUpdate are also provided here [1]. Again, if there's any possibility to use flashrom, you should go for it, as I remember the dellBiosUpdate seemed very dumb and didn't even provide any kind of progress indication. Regards, /Pete [1] http://linux.dell.com/libsmbios/main/dellBiosUpdate.html

1 0

Question about using flash programmer for Dell BIOS
by Delyan Zhekov 08 Dec '11

08 Dec '11

Hello, I found your forum during the great search for answers of mine. It all has to do with dell optiplex gx240 BIOS. The problem: I have to write a BIOS file to a SST49LF004A-33-4C-NH chip using a flash programmer. I downloaded the .exe file and extracted .hdr and .rom files from it and I have no idea which to use with the programmer. I also found a tool converting .hdr to .bin but the .bin file is more than 5MB in size. I am totally lost. Could you give me a direction what file should I use with the flash programmer. Thank you. Delyan Zhekov

1 0

Re: [flashrom] [PATCH] updated motherboards URL in print.c
by Carl-Daniel Hailfinger 08 Dec '11

08 Dec '11

Hi Benjamin, I have forward ported your changes. Sorry it took me so long. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Committed in r1472 with minor updates. Regards, Carl-Daniel Am 27.07.2011 08:51 schrieb Benjamin: > Hi, > > OK, I guess I have nothing to do now? > > Benjamin > > 2011/7/26 Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > >> > Hi Benjamin, >> > >> > Am 12.07.2011 20:34 schrieb Stefan Tauner: >>> > > On Mon, 04 Jul 2011 22:15:31 +0200 >>> > > Benjamin Bellec <b.bellec(a)gmail.com> wrote: >>> > > >>> > > >>>> > >> Updated motherboards URL, v2 >>>> > >> >>> > > hello benjamin >>> > > >>> > > i am still not sure about the asus urls so i left them out for now. >>> > > but i have committed all others (with minor changes) locally and will >>> > > push that to the main svn later. thanks for your work! >>> > > >> > >> > Here is the ASUS URL patch against latest flashrom. Since you wrote it, >> > I have kept your signoff. There are a few ASUS URLs left which have >> > product.aspx in there, but unfortunately the automatic redirect fails >> > for them. Not sure how to proceed. >> > >> > Regards, >> > Carl-Daniel >> > >> > Signed-off-by: Benjamin Bellec <b.bellec(a)gmail.com> >> > -- http://www.hailfinger.org/

1 0

[commit] r1472 - trunk
by repository service 08 Dec '11

08 Dec '11

Author: hailfinger Date: Thu Dec 8 08:49:11 2011 New Revision: 1472 URL: http://flashrom.org/trac/flashrom/changeset/1472 Log: Update URLs in print.c Move Asus A8Jm, Asus M6Ne to the laptop section. No working URL for the A8Jm found. Signed-off-by: Benjamin Bellec <b.bellec(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/print.c Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Dec 2 22:48:17 2011 (r1471) +++ trunk/print.c Thu Dec 8 08:49:11 2011 (r1472) @@ -570,61 +570,59 @@ B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), - B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), - B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), + B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), + B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), - B("ASUS", "A7V400-MX", 1, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL), - B("ASUS", "A7V600-X", 1, "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k", NULL), - B("ASUS", "A7V8X", 1, "http://www.asus.com/product.aspx?P_ID=qfpaGrAy2kLVo0f2", NULL), - B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/product.aspx?P_ID=SEJOOYqfuQPitx2H", NULL), - B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ", NULL), - B("ASUS", "A7V8X-X", 1, "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw", NULL), - B("ASUS", "A8Jm", 1, "http://www.asus.com/product.aspx?P_ID=VztICtOgiU6drx4m", NULL), + B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), + B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), + B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), + B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), + B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), + B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), - B("ASUS", "A8N-E", 1, "http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz", NULL), + B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), - B("ASUS", "A8N-SLI", 1, "http://www.asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK", NULL), + B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."), - B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/product.aspx?P_ID=nbulqxniNmzf0mH1", NULL), + B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), - B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=JBqqlpj4cspbSa3s", NULL), + B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), - B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL), - B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL), - B("ASUS", "A8V-E SE", 1, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), - B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/product.aspx?P_ID=EIDxaW1Ln3YR9RA2", NULL), - B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/product.aspx?P_ID=lt1ShF6xEn3rlLe7", NULL), - B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/product.aspx?P_ID=9BmKhMwWCwqyl1lz", NULL), - B("ASUS", "K8N", 1, "http://www.asus.com/product.aspx?P_ID=zigzffr75jWJ7j2y", NULL), - B("ASUS", "K8V", 1, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL), - B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o", NULL), - B("ASUS", "K8V-X", 1, NULL, NULL), - B("ASUS", "K8V-X SE", 1, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL), - B("ASUS", "M2A-MX", 1, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL), - B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), - B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=0jMy2X8lKstYRvev", NULL), - B("ASUS", "M2N-E", 1, "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), - B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=NJ8fkR6ufRM9XvFC", NULL), - B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=szSFtrap7crpBaQE", NULL), - B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF", NULL), - B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/product.aspx?P_ID=HGTVnGv5nGahCYgK", NULL), - B("ASUS", "M2V", 1, "http://www.asus.com/product.aspx?P_ID=OqYlEDFfF6ZqZGvp", NULL), - B("ASUS", "M2V-MX", 1, "http://www.asus.com/product.aspx?P_ID=7grf8Ci4yxnqzt3z", NULL), - B("ASUS", "M3A", 1, "http://www.asus.com/product.aspx?P_ID=P48rppKk4jrc9pNd", NULL), - B("ASUS", "M3A76-CM", 1, "http://www.asus.com/product.aspx?P_ID=aU8effdifLvraVze", NULL), - B("ASUS", "M3A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL), - B("ASUS", "M3N78-VM", 1, "http://www.asus.com/product.aspx?P_ID=ovqEgLFRjnSClhSV", NULL), - B("ASUS", "M4A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=0KyowHKUFAQqH2DO", NULL), - B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/product.aspx?P_ID=fcsXWSxnhzZE9rnR", NULL), - B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/product.aspx?P_ID=QHbvGVB1mXmmD8qQ", NULL), - B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/product.aspx?P_ID=exJL00uovTJaDqxR", NULL), - B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), - B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), - B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/product.aspx?P_ID=Gdf0vtpVf72LTYgs", NULL), + B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), + B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), + B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), + B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), + B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), + B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), + B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), + B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), + B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), + B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), + B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), + B("ASUS", "M2A-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), + B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), + B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), + B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), + B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), + B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), + B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), + B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), + B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), + B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), + B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), + B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), + B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), + B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), + B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), + B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), + B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), + B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), + B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), - B("ASUS", "M6Ne", 0, "http://www.asus.com/Product.aspx?P_ID=IbqN4JCxeRiep4WN", "Untested board enable."), B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), @@ -638,53 +636,53 @@ B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), - B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), - B("ASUS", "P4GV-LA (Guppy)", 1, NULL, NULL), - B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), - B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), - B("ASUS", "P4P800-VM", 1, NULL, NULL), + B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), + B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), + B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), + B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), + B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), - B("ASUS", "P4S800-MX", 1, "http://www.asus.com/product.aspx?P_ID=Bb57zoJhmO1Qkcrh", NULL), + B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), - B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL), + B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), - B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/product.aspx?P_ID=PYvbfOokwxUzJky3", NULL), - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), + B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), + B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."), - B("ASUS", "P5GD2 Premium", 1, "http://www.asus.it/product.aspx?P_ID=lRKaz1Rb6Xb0OFM7", NULL), - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), - B("ASUS", "P5GDC-V Deluxe", 1, NULL, NULL), + B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), + B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), + B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), - B("ASUS", "P5K-VM", 1, "http://www.asus.com/product.aspx?P_ID=EJybwaQ3J8goocW2", NULL), - B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), - B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), - B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/product.aspx?P_ID=G0BQ4fIXoM1P38TZ", NULL), + B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), + B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), + B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), + B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), + B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), - B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), - B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), - B("ASUS", "P5PE-VM", 1, "http://www.asus.com/product.aspx?P_ID=k3h0ZFVu9Lo1dUvk", NULL), + B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), + B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), + B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), - B("ASUS", "P6T SE", 1, "http://www.asus.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E", NULL), - B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL), - B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), + B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), + B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), + B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), - B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/product.aspx?P_ID=z1K4qLpLmyLfwXtw", NULL), + B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), + B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -934,7 +932,9 @@ #if defined(__i386__) || defined(__x86_64__) B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), - B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "A8Jm", 1, NULL, NULL), + B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),

1 0

Re: [flashrom] Patches + RFC: Deal with locked ICH flash descriptor regions transparently
by Stefan Tauner 07 Dec '11

07 Dec '11

hey and thanks for working on getting stuff back upstream! i have very little time at the moment (and the next few weeks) so i just skimmed over the patches a few days ago and will just mention the main points i noticed. On Fri, 2 Dec 2011 17:38:20 -0800 David Hendricks <dhendrix(a)google.com> wrote: > The following patches (attached and in-lined below) add support for > "graceful" handling of certain errors and in particular the read/write > errors that occur on newer Intel chipsets. With a little work, it could be > extended to handle SPI hardware write protection schema, too. 1. the patches seemed to be divided in a little bit odd way, but that might actually be because i did not read that carefully. btw please post one patch per mail so that patchwork recognize them all. > Note: I think we should probably add a "I_want_a_brick" programmer > parameter for those daring enough to try this. I suspect certain OEM tools > use unknown Mebx > commands<http://support.dell.com/support/edocs/systems/latd630/en/amt/MEBX.htm>to > disable ME read/write protection when they do updates. Perhaps that > stuff can be added later as a board_enable thing. 2. i dont know enough about MEBx, but i have not found any mention of it in any official documentation about ME unlocking - public or otherwise. the user interface as shown on the dell screenshot might not be accessible for users. i need to test if the MEBx settings have any influence on the ICH registers on my ICH10 based (and locked) intel board. wont happen soon though. 3. the official way to disabled the ME locking is via an HECI™/MEI™ service™ with™ the™ HMRFPO™ Enable™ Intel® command™. the MEI protocol is packet-based and well documented including an open source linux kernel module. i have ported this to flashrom and will try to get it into a mergeable state in the future. the only missing part then is the right MEI command/reply sequence to unlock the ME region. the integration would not use board enables but the unlocking would be done automatically in ich_init (and re-enabling in shutdown, if we could figure out how... not that important imho because it is security be obscurity anyway). the HMRFPO command is documented in the BIOS writer guide(s). > With the patches applied, the low-level ICH code will handle all the > details of checking the address associated with an opcode against the > permissions set in the flash descriptor. If an operation cannot be > performed on a given region, an error code is propagated up the stack so > that high-level read/write logic can decide to skip that region. As is, the > patch will make the high-level logic fill in unreadable regions with 0xff > bytes (for reads) and will quietly skip over unwriteable regions (for > writes). > > The biggest downside is, of course, that read/write operations no longer do > exactly what one might expect. A full read operation (flashrom -r) will > give you a ROM-sized image with 0xff bytes wherever read is forbidden (e.g. > where the management engine firmware lives). A full write operation will > skip forbidden regions (e.g. flash descriptor and ME) which may leave stuff > in an inconsistent and potentially unusable state (thanks, Intel!). 4. i dont like the overall approach of the patches at all. they complicate the most complicated parts of flashrom even more (chunked read/erase/write) for little gain for an even littler target audience (no offense google :). the init code can already tell the upper level code which parts are accessible and which are not. there is no need to fiddle around with the opcodes on the fly (in addition to what we do to reprogram opcodes because we are forced to... :) i would like to do this in a less intrusive and more generic way by means of layout(file)s. patches for enabling the usage of layouts in all program modes exists already and would give anyone who dares an easy way to operate on any accessible region on its own (reviews are welcome! :P). an additional layout file generation by programmer init code (when told so) or a generic automagic mode that queries the programmer, the flash chip and maybe other modules for access rights to plan the whole operation before really issuing read/erase/write commands (a level above your implementation) would give us the same functionality, but also would be useful for non-ich users, generic to be extended in the future and most importantly: it would not touch the core read/write functions. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom