flashrom

flashrom@flashrom.org

9164 discussions

Re: [flashrom] [PATCH 1/1] Add manpage entry for pony_spi
by Carl-Daniel Hailfinger 05 May '12

05 May '12

Am 01.05.2012 01:28 schrieb Michael Karcher: > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Thanks for the documentation patch. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1530 - trunk
by repository service 05 May '12

05 May '12

Author: mkarcher Date: Sat May 5 22:53:59 2012 New Revision: 1530 URL: http://flashrom.org/trac/flashrom/changeset/1530 Log: Add manpage entry for pony_spi Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.8 Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Sat May 5 22:43:42 2012 (r1529) +++ trunk/flashrom.8 Sat May 5 22:53:59 2012 (r1530) @@ -201,6 +201,9 @@ .BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport " or Xilinx DLC5 compatible cable) .sp +.BR "* pony_spi" " (for SPI flash ROMs attached to a SI-Prog serial port " +bitbanging adapter) +.sp .BR "* nicintel_spi" " (for SPI flash ROMs on Intel Gigabit network cards)" .sp .BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)" @@ -614,6 +617,26 @@ The schematic of the Xilinx DLC 5 was published at .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . .SS +.BR "pony_spi " programmer +The serial port (like /dev/ttyS0, /dev/ttyUSB0 on Linux or COM3 on windows) is +specified using the mandatory +.B dev +parameter. The adapter type is selectable between SI-Prog (used for +SPI devices with PonyProg 2000) or a custom made serial bitbanging programmer +named "serbang". The optional +.B type +parameter accepts the values "si_prog" (default) or "serbang". +.sp +Information about the SI-Prog adapter can be found at +.BR "http://www.lancos.com/siprogsch.html " . +.sp +An example call to flashrom is +.sp +.B " flashrom \-p pony_spi:dev=/dev/ttyS0,type=serbang" +.sp +Please note that while USB-to-serial adapters work under certain circumstances, +this slows down operation considerably. +.SS .BR "ogp_spi " programmer The flash ROM chip to access must be specified with the .B rom

1 0

[PATCH] W83697xx superio flash enable
by David Borg 05 May '12

05 May '12

Adds a function to enable the flash interface on w83697xx superio's. Still needs to be hooked up to the superio detection framework though. Signed-off-by: David Borg <borg.db(a)gmail.com>

2 1

[commit] r1529 - trunk
by repository service 05 May '12

05 May '12

Author: hailfinger Date: Sat May 5 22:43:42 2012 New Revision: 1529 URL: http://flashrom.org/trac/flashrom/changeset/1529 Log: Function to enable the flash interface on w83697 family SuperIO chips. Not hooked up to the superio detection framework yet. Signed-off-by: David Borg <borg.db(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed May 2 22:08:01 2012 (r1528) +++ trunk/board_enable.c Sat May 5 22:43:42 2012 (r1529) @@ -380,6 +380,39 @@ w836xx_ext_leave(port); } +/** + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83697HF/F/HG, W83697SF/UF/UG + */ +void w83697xx_memw_enable(uint16_t port) +{ + w836xx_ext_enter(port); + if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */ + if((sio_read(port, 0x2A) & 0xF0) == 0xF0) { + + /* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */ + /* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */ + /* These bits are reserved on W83697HF/F/HG */ + /* Shouldn't be needed though. */ + + /* CR28 Bit3 must be set to 1 to enable flash access to */ + /* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */ + /* This bit is reserved on W83697HF/F/HG which default to 0 */ + sio_mask(port, 0x28, 0x08, 0x08); + + /* Enable MEMW# and set ROM size select to max. (4M)*/ + sio_mask(port, 0x24, 0x28, 0x38); + + } else { + msg_perr("WARNING: Flash interface in use by GPIO!\n"); + } + } else { + msg_pinfo("BIOS ROM is disabled\n"); + } + w836xx_ext_leave(port); +} + /* * Suited for: * - EPoX EP-8K5A2: VIA KT333 + VT8235

1 0

ASRock N68C-S
by Kaj Ailomaa 04 May '12

04 May '12

http://www.asrock.com/mb/overview.asp?model=n68c-s%20ucc sudo flashrom -V flashrom v0.9.5.2-r1517 on Linux 3.2.15-lowlatency (x86_64), built with libpci 3.1.7, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 957M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 1222 us, 10000 myus = 9878 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "N68C-S" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org with 'CHIPSET: your board name' in the subject line. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified. lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:0a.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g 02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) 02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 03:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) 04:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200A IEEE-1394a-2000 Controller (PHY/Link) (rev 01)

1 0

[coreboot] Flashing capability in coreboot
by Carl-Daniel Hailfinger 04 May '12

04 May '12

Hi, coreboot has a requirement to store some data in flash to get some chipsets to work well. There are multiple ways to achieve this: 1. Write flashing code from scratch. Pointless. 2. Use parts of the flashrom codebase or libflashrom. Advantages: coreboot and flashrom developers often work on both projects, enabling better cooperation. flashrom has the best chipset/flash support out there. 3. Use parts of the U-Boot codebase (which has drivers derived from flashrom). Advantages: The codebase is designed with firmware constraints in mind. http://review.coreboot.org/997 seems to implement this. As a flashrom developer, I would like to see flashrom code used in coreboot, and I'm very interested in finding and fixing any obstacles to that goal. Patrick, I think you worked on the coreboot patch mentioned above. Could you tell us about your reasons for choosing option 3, and how we can make option 2 viable? Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] EWSR fixes + spi25.c spi_write_status_register cleanup
by Stefan Tauner 03 May '12

03 May '12

On Sun, 29 Apr 2012 01:50:44 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > will commit both patches as is if no one vetos in the next days. > > [PATCH 1/2] Tag all EWSR chips correctly. > [PATCH 2/2] spi25.c: Refactor spi_write_status_register helpers. done in r1527 and r1528, thanks steven for the datasheet digging! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[commit] r1528 - trunk
by repository service 02 May '12

02 May '12

Author: stefanct Date: Wed May 2 22:08:01 2012 New Revision: 1528 URL: http://flashrom.org/trac/flashrom/changeset/1528 Log: spi25.c: Refactor spi_write_status_register helpers. In r1115 "Write protection handling for Atmel AT25*" the old spi_write_status_register function was duplicated to send WREN and EWSR commands respectively controlled by a new common wrapper function spi_write_status_register without a reason. Both functions' resulting code is equal apart from the opcode used. The code itself does also differ in the macros used, but their value (apart from the opcode) is equal. This patch adds a new parameter for the opcode to the helper function which allows removal of the other one. This relies on the fact that EWSR and WREN have the same INSIZE and OUTSIZE though. If that is really seen as an issue, the sizes could be made parameters too. This patch also changes the wrapper so that it no longer sets the feature bits of the struct flash(ctx) argument. This may result in changed output, because it no longer implicitly disables the debug message in following executions. Since almost all chips had their feature bits fixed in the previous commit, this is a minor problem. Also, spi_write_status_enable has been dead code since r658 or so. Remove it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/spi25.c Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed May 2 22:07:57 2012 (r1527) +++ trunk/spi25.c Wed May 2 22:08:01 2012 (r1528) @@ -764,63 +764,19 @@ * This is according the SST25VF016 datasheet, who knows it is more * generic that this... */ -static int spi_write_status_register_ewsr(struct flashctx *flash, int status) +static int spi_write_status_register_flag(struct flashctx *flash, int status, const unsigned char enable_opcode) { int result; int i = 0; - struct spi_command cmds[] = { - { - /* WRSR requires either EWSR or WREN depending on chip type. */ - .writecnt = JEDEC_EWSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_EWSR }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_WRSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution\n", - __func__); - /* No point in waiting for the command to complete if execution - * failed. - */ - return result; - } - /* WRSR performs a self-timed erase before the changes take effect. - * This may take 50-85 ms in most cases, and some chips apparently - * allow running RDSR only once. Therefore pick an initial delay of - * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. + /* + * WRSR requires either EWSR or WREN depending on chip type. + * The code below relies on the fact hat EWSR and WREN have the same + * INSIZE and OUTSIZE. */ - programmer_delay(100 * 1000); - while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) { - if (++i > 490) { - msg_cerr("Error: WIP bit after WRSR never cleared\n"); - return TIMEOUT_ERROR; - } - programmer_delay(10 * 1000); - } - return 0; -} - -static int spi_write_status_register_wren(struct flashctx *flash, int status) -{ - int result; - int i = 0; struct spi_command cmds[] = { { - /* WRSR requires either EWSR or WREN depending on chip type. */ .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, + .writearr = (const unsigned char[]){ enable_opcode }, .readcnt = 0, .readarr = NULL, }, { @@ -837,8 +793,7 @@ result = spi_send_multicommand(flash, cmds); if (result) { - msg_cerr("%s failed during command execution\n", - __func__); + msg_cerr("%s failed during command execution\n", __func__); /* No point in waiting for the command to complete if execution * failed. */ @@ -862,17 +817,18 @@ int spi_write_status_register(struct flashctx *flash, int status) { + int feature_bits = flash->feature_bits; int ret = 1; - if (!(flash->feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { + if (!(feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { msg_cdbg("Missing status register write definition, assuming " "EWSR is needed\n"); - flash->feature_bits |= FEATURE_WRSR_EWSR; + feature_bits |= FEATURE_WRSR_EWSR; } - if (flash->feature_bits & FEATURE_WRSR_WREN) - ret = spi_write_status_register_wren(flash, status); - if (ret && (flash->feature_bits & FEATURE_WRSR_EWSR)) - ret = spi_write_status_register_ewsr(flash, status); + if (feature_bits & FEATURE_WRSR_WREN) + ret = spi_write_status_register_flag(flash, status, JEDEC_WREN); + if (ret && (feature_bits & FEATURE_WRSR_EWSR)) + ret = spi_write_status_register_flag(flash, status, JEDEC_EWSR); return ret; }

1 0

[commit] r1527 - trunk
by repository service 02 May '12

02 May '12

Author: stefanct Date: Wed May 2 22:07:57 2012 New Revision: 1527 URL: http://flashrom.org/trac/flashrom/changeset/1527 Log: Tag all EWSR chips correctly. All SPI chips without a WRSR feature bit set were evaluated except the Sanyo LF25FW203A for which no datasheet is available. The following list includes all SPI-capable chips that still have no WRSR feature bit set: - AT26DF041 - AT45CS1282 - AT45DB011D - AT45DB021D - AT45DB041D - AT45DB081D - AT45DB161D - AT45DB321C - AT45DB321D - AT45DB642D All of them have no write function set and can be therefore ignored for now. Apart from those the generic chips are also not tagged. The opaque flash interface should not be affected. The SFDP dummy chip is changed to explicitly set EWSR if it can't deduce it dynamically. The vendor detecting generic chips can't write anyway. Signed-off-by: Steven Zakulec <spzakulec(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/sfdp.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed May 2 21:48:21 2012 (r1526) +++ trunk/flashchips.c Wed May 2 22:07:57 2012 (r1527) @@ -545,6 +545,7 @@ .model_id = AMIC_A25L05PT, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -578,6 +579,7 @@ .model_id = AMIC_A25L05PU, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -611,6 +613,7 @@ .model_id = AMIC_A25L10PT, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -645,6 +648,7 @@ .model_id = AMIC_A25L10PU, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -679,6 +683,7 @@ .model_id = AMIC_A25L20PT, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -713,6 +718,7 @@ .model_id = AMIC_A25L20PU, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -752,6 +758,7 @@ .model_id = AMIC_A25L40PT, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -786,6 +793,7 @@ .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -820,6 +828,7 @@ .model_id = AMIC_A25L80P, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -854,6 +863,7 @@ .model_id = AMIC_A25L16PT, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -891,6 +901,7 @@ .model_id = AMIC_A25L16PU, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -1701,6 +1712,7 @@ .model_id = ATMEL_AT25FS010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1741,6 +1753,7 @@ .model_id = ATMEL_AT25FS040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1778,6 +1791,7 @@ .model_id = ATMEL_AT26DF041, .total_size = 512, .page_size = 256, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1839,6 +1853,7 @@ .model_id = ATMEL_AT26DF161, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1876,6 +1891,7 @@ .model_id = ATMEL_AT26DF161A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1914,6 +1930,7 @@ .model_id = ATMEL_AT26DF321, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1932,6 +1949,7 @@ .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2062,6 +2080,7 @@ .model_id = ATMEL_AT45CS1282, .total_size = 16896 /* No power of two sizes */, .page_size = 1056 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2078,6 +2097,7 @@ .model_id = ATMEL_AT45DB011D, .total_size = 128 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2094,6 +2114,7 @@ .model_id = ATMEL_AT45DB021D, .total_size = 256 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2110,6 +2131,7 @@ .model_id = ATMEL_AT45DB041D, .total_size = 512 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2126,6 +2148,7 @@ .model_id = ATMEL_AT45DB081D, .total_size = 1024 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2142,6 +2165,7 @@ .model_id = ATMEL_AT45DB161D, .total_size = 2048 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2158,6 +2182,7 @@ .model_id = ATMEL_AT45DB321C, .total_size = 4224 /* No power of two sizes */, .page_size = 528 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2175,6 +2200,7 @@ .total_size = 4096 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .feature_bits = FEATURE_OTP, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, @@ -2192,6 +2218,7 @@ .model_id = ATMEL_AT45DB642D, .total_size = 8192 /* Size can only be determined from status register */, .page_size = 1024 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2477,6 +2504,7 @@ .model_id = EMST_F25L008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2510,6 +2538,7 @@ .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2542,6 +2571,7 @@ .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2574,6 +2604,7 @@ .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2606,6 +2637,7 @@ .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2638,6 +2670,7 @@ .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2671,6 +2704,7 @@ .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2704,6 +2738,7 @@ .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2737,6 +2772,7 @@ .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2770,6 +2806,7 @@ .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2803,6 +2840,7 @@ .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2836,6 +2874,7 @@ .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2869,6 +2908,7 @@ .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2902,6 +2942,7 @@ .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2935,6 +2976,7 @@ .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3002,6 +3044,7 @@ .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5197,6 +5240,7 @@ .model_id = ST_M25PE10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5227,6 +5271,7 @@ .model_id = ST_M25PE20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5257,6 +5302,7 @@ .model_id = ST_M25PE40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5287,6 +5333,7 @@ .model_id = ST_M25PE80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5317,6 +5364,7 @@ .model_id = ST_M25PE16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5376,6 +5424,7 @@ .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5406,6 +5455,7 @@ .model_id = PMC_PM25LV016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5442,6 +5492,7 @@ .model_id = PMC_PM25LV020, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5472,6 +5523,7 @@ .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5502,6 +5554,7 @@ .model_id = PMC_PM25LV080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5538,6 +5591,7 @@ .model_id = PMC_PM25LV512, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5873,6 +5927,7 @@ .model_id = SPANSION_S25FL004A, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5900,6 +5955,7 @@ .model_id = SPANSION_S25FL008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5927,6 +5983,7 @@ .model_id = SPANSION_S25FL016A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5954,6 +6011,7 @@ .model_id = SPANSION_S25FL032A, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5981,6 +6039,7 @@ .model_id = SPANSION_S25FL064A, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6008,6 +6067,7 @@ .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6038,6 +6098,7 @@ .model_id = SST_SST25VF080_REMS, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6068,6 +6129,7 @@ .model_id = SST_SST25VF010_REMS, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6098,6 +6160,7 @@ .model_id = SST_SST25VF016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6134,6 +6197,7 @@ .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6170,6 +6234,7 @@ .model_id = SST_SST25VF064C, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6206,6 +6271,7 @@ .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6236,6 +6302,7 @@ .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6272,6 +6339,7 @@ .model_id = SST_SST25VF040B_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6308,6 +6376,7 @@ .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7128,6 +7197,7 @@ .model_id = ST_M25P05A, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7160,6 +7230,7 @@ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7187,6 +7258,7 @@ .model_id = ST_M25P10A, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7215,6 +7287,7 @@ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7242,6 +7315,7 @@ .model_id = ST_M25P20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7269,6 +7343,7 @@ .model_id = ST_M25P40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7296,6 +7371,7 @@ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7322,6 +7398,7 @@ .model_id = ST_M25P80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7349,6 +7426,7 @@ .model_id = ST_M25P16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7376,6 +7454,7 @@ .model_id = ST_M25P32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7403,6 +7482,7 @@ .model_id = ST_M25P64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7430,6 +7510,7 @@ .model_id = ST_M25P128, .total_size = 16384, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7458,7 +7539,7 @@ .total_size = 2048, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7488,6 +7569,7 @@ .model_id = ST_M25PX32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7518,6 +7600,7 @@ .model_id = ST_M25PX64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, Modified: trunk/sfdp.c ============================================================================== --- trunk/sfdp.c Wed May 2 21:48:21 2012 (r1526) +++ trunk/sfdp.c Wed May 2 22:07:57 2012 (r1527) @@ -176,10 +176,12 @@ flash->feature_bits = FEATURE_WRSR_EWSR; msg_cdbg2("EWSR (0x50).\n"); } - } else + } else { msg_cdbg2("non-volatile and the standard does not allow " "vendors to tell us whether EWSR/WREN is needed for " "status register writes - assuming EWSR.\n"); + flash->feature_bits = FEATURE_WRSR_EWSR; + } msg_cdbg2(" Write chunk size is "); if (tmp32 & (1 << 2)) {

1 0

[PATCH] board enable for ASUS P5BV-R
by Geoffrey McRae 02 May '12

02 May '12

Please see attached patch to enable write on ASUS P5BV-R boards used in ASUS RS120-E5/PA2 servers. Kind Regards Geoffrey McRae spacevs.com.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom