flashrom

flashrom@flashrom.org

7 participants
9163 discussions

[commit] r1754 - trunk
by repository service 02 Oct '13

02 Oct '13

Author: stefanct Date: Wed Oct 2 03:21:57 2013 New Revision: 1754 URL: http://flashrom.org/trac/flashrom/changeset/1754 Log: rayer_spi: Add pinout for Altera ByteBlasterMV. There is a ByteBlasterII product that is only almost compatible. Signed-off-by: Maksim Kuleshov <mmcx(a)mail.ru> Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Tested-by: Maksim Kuleshov <mmcx(a)mail.ru> Acked-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.8.tmpl trunk/rayer_spi.c Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Wed Oct 2 03:21:45 2013 (r1753) +++ trunk/flashrom.8.tmpl Wed Oct 2 03:21:57 2013 (r1754) @@ -759,12 +759,15 @@ syntax where .B model can be -.BR rayer " for the RayeR cable or " xilinx " for the Xilinx Parallel Cable III -(DLC 5). +.BR rayer " for the RayeR cable, " byteblastermv " for the Altera ByteBlasterMV, or " xilinx \ +" for the Xilinx Parallel Cable III (DLC 5)." .sp More information about the RayeR hardware is available at .nh .BR "http://rayer.ic.cz/elektro/spipgm.htm " . +The Altera ByteBlasterMV datasheet can be obtained from +.nh +.BR "http://www.altera.co.jp/literature/ds/dsbytemv.pdf " . The schematic of the Xilinx DLC 5 was published in .nh .BR "http://www.xilinx.com/support/documentation/user_guides/xtp029.pdf " . Modified: trunk/rayer_spi.c ============================================================================== --- trunk/rayer_spi.c Wed Oct 2 03:21:45 2013 (r1753) +++ trunk/rayer_spi.c Wed Oct 2 03:21:57 2013 (r1754) @@ -70,9 +70,22 @@ .miso_bit = 4, }; +static void byteblaster_preinit(const void *); +static int byteblaster_shutdown(void *); + +static const struct rayer_pinout altera_byteblastermv = { + .cs_bit = 1, + .sck_bit = 0, + .mosi_bit = 6, + .miso_bit = 7, + .preinit = byteblaster_preinit, + .shutdown = byteblaster_shutdown, +}; + static const struct rayer_programmer rayer_spi_types[] = { {"rayer", NT, "RayeR SPIPGM", &rayer_spipgm}, {"xilinx", NT, "Xilinx Parallel Cable III (DLC 5)", &xilinx_dlc5}, + {"byteblastermv", OK, "Altera ByteBlasterMV", &altera_byteblastermv}, {0}, }; @@ -195,6 +208,19 @@ return 0; } +static void byteblaster_preinit(const void *data){ + msg_pdbg("byteblaster_preinit\n"); + /* Assert #EN signal. */ + OUTB(2, lpt_iobase + 2 ); +} + +static int byteblaster_shutdown(void *data){ + msg_pdbg("byteblaster_shutdown\n"); + /* De-Assert #EN signal. */ + OUTB(0, lpt_iobase + 2 ); + return 0; +} + #else #error PCI port I/O access is not supported on this architecture yet. #endif

1 0

[commit] r1753 - trunk
by repository service 02 Oct '13

02 Oct '13

Author: stefanct Date: Wed Oct 2 03:21:45 2013 New Revision: 1753 URL: http://flashrom.org/trac/flashrom/changeset/1753 Log: rayer_spi: Improve support for different pinouts. Create a list of programmer types with names, test state and linked layouts. This list could be listed with flashrom -L in follow-up patches. Handle a bit in status register that is inverted, this will be used in different future programmer types. Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Tested-by: Maksim Kuleshov <mmcx(a)mail.ru> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.8.tmpl trunk/rayer_spi.c Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Mon Sep 23 17:32:25 2013 (r1752) +++ trunk/flashrom.8.tmpl Wed Oct 2 03:21:45 2013 (r1753) @@ -208,8 +208,7 @@ .sp .BR "* dediprog" " (for SPI flash ROMs attached to a Dediprog SF100)" .sp -.BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport " -or Xilinx DLC5 compatible cable) +.BR "* rayer_spi" " (for SPI flash ROMs attached to a parallel port by one of various cable types)" .sp .BR "* pony_spi" " (for SPI flash ROMs attached to a SI-Prog serial port " bitbanging adapter) @@ -766,9 +765,9 @@ More information about the RayeR hardware is available at .nh .BR "http://rayer.ic.cz/elektro/spipgm.htm " . -The schematic of the Xilinx DLC 5 was published at +The schematic of the Xilinx DLC 5 was published in .nh -.BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . +.BR "http://www.xilinx.com/support/documentation/user_guides/xtp029.pdf " . .SS .BR "pony_spi " programmer The serial port (like /dev/ttyS0, /dev/ttyUSB0 on Linux or COM3 on windows) is Modified: trunk/rayer_spi.c ============================================================================== --- trunk/rayer_spi.c Mon Sep 23 17:32:25 2013 (r1752) +++ trunk/rayer_spi.c Wed Oct 2 03:21:45 2013 (r1753) @@ -17,11 +17,9 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* Driver for the SPIPGM hardware by "RayeR" Martin Rehak. - * See http://rayer.ic.cz/elektro/spipgm.htm for schematics and instructions. - */ - -/* This driver uses non-portable direct I/O port accesses which won't work on +/* Driver for various LPT adapters. + * + * This driver uses non-portable direct I/O port accesses which won't work on * any non-x86 platform, and even on x86 there is a high chance there will be * collisions with any loaded parallel port drivers. * The big advantage of direct port I/O is OS independence and speed because @@ -37,21 +35,48 @@ #include "programmer.h" #include "hwaccess.h" -enum rayer_type { - TYPE_RAYER, - TYPE_XILINX_DLC5, -}; - /* We have two sets of pins, out and in. The numbers for both sets are * independent and are bitshift values, not real pin numbers. * Default settings are for the RayeR hardware. */ -/* Pins for master->slave direction */ -static int rayer_cs_bit = 5; -static int rayer_sck_bit = 6; -static int rayer_mosi_bit = 7; -/* Pins for slave->master direction */ -static int rayer_miso_bit = 6; + +struct rayer_programmer { + const char *type; + const enum test_state status; + const char *description; + const void *dev_data; +}; + +struct rayer_pinout { + uint8_t cs_bit; + uint8_t sck_bit; + uint8_t mosi_bit; + uint8_t miso_bit; + void (*preinit)(const void *); + int (*shutdown)(void *); +}; + +static const struct rayer_pinout rayer_spipgm = { + .cs_bit = 5, + .sck_bit = 6, + .mosi_bit = 7, + .miso_bit = 6, +}; + +static const struct rayer_pinout xilinx_dlc5 = { + .cs_bit = 2, + .sck_bit = 1, + .mosi_bit = 0, + .miso_bit = 4, +}; + +static const struct rayer_programmer rayer_spi_types[] = { + {"rayer", NT, "RayeR SPIPGM", &rayer_spipgm}, + {"xilinx", NT, "Xilinx Parallel Cable III (DLC 5)", &xilinx_dlc5}, + {0}, +}; + +static const struct rayer_pinout *pinout = NULL; static uint16_t lpt_iobase; @@ -60,22 +85,22 @@ static void rayer_bitbang_set_cs(int val) { - lpt_outbyte &= ~(1 << rayer_cs_bit); - lpt_outbyte |= (val << rayer_cs_bit); + lpt_outbyte &= ~(1 << pinout->cs_bit); + lpt_outbyte |= (val << pinout->cs_bit); OUTB(lpt_outbyte, lpt_iobase); } static void rayer_bitbang_set_sck(int val) { - lpt_outbyte &= ~(1 << rayer_sck_bit); - lpt_outbyte |= (val << rayer_sck_bit); + lpt_outbyte &= ~(1 << pinout->sck_bit); + lpt_outbyte |= (val << pinout->sck_bit); OUTB(lpt_outbyte, lpt_iobase); } static void rayer_bitbang_set_mosi(int val) { - lpt_outbyte &= ~(1 << rayer_mosi_bit); - lpt_outbyte |= (val << rayer_mosi_bit); + lpt_outbyte &= ~(1 << pinout->mosi_bit); + lpt_outbyte |= (val << pinout->mosi_bit); OUTB(lpt_outbyte, lpt_iobase); } @@ -83,8 +108,8 @@ { uint8_t tmp; - tmp = INB(lpt_iobase + 1); - tmp = (tmp >> rayer_miso_bit) & 0x1; + tmp = INB(lpt_iobase + 1) ^ 0x80; // bit.7 inverted + tmp = (tmp >> pinout->miso_bit) & 0x1; return tmp; } @@ -99,8 +124,8 @@ int rayer_spi_init(void) { + const struct rayer_programmer *prog = rayer_spi_types; char *arg = NULL; - enum rayer_type rayer_type = TYPE_RAYER; /* Non-default port requested? */ arg = extract_programmer_param("iobase"); @@ -138,36 +163,20 @@ arg = extract_programmer_param("type"); if (arg) { - if (!strcasecmp(arg, "rayer")) { - rayer_type = TYPE_RAYER; - } else if (!strcasecmp(arg, "xilinx")) { - rayer_type = TYPE_XILINX_DLC5; - } else { + for (; prog->type != NULL; prog++) { + if (strcasecmp(arg, prog->type) == 0) { + break; + } + } + if (prog->type == NULL) { msg_perr("Error: Invalid device type specified.\n"); free(arg); return 1; } + free(arg); } - free(arg); - switch (rayer_type) { - case TYPE_RAYER: - msg_pdbg("Using RayeR SPIPGM pinout.\n"); - /* Bits for master->slave direction */ - rayer_cs_bit = 5; - rayer_sck_bit = 6; - rayer_mosi_bit = 7; - /* Bits for slave->master direction */ - rayer_miso_bit = 6; - break; - case TYPE_XILINX_DLC5: - msg_pdbg("Using Xilinx Parallel Cable III (DLC 5) pinout.\n"); - /* Bits for master->slave direction */ - rayer_cs_bit = 2; - rayer_sck_bit = 1; - rayer_mosi_bit = 0; - /* Bits for slave->master direction */ - rayer_miso_bit = 4; - } + msg_pinfo("Using %s pinout.\n", prog->description); + pinout = (struct rayer_pinout *)prog->dev_data; if (rget_io_perms()) return 1; @@ -175,6 +184,11 @@ /* Get the initial value before writing to any line. */ lpt_outbyte = INB(lpt_iobase); + if (pinout->shutdown) + register_shutdown(pinout->shutdown, (void*)pinout); + if (pinout->preinit) + pinout->preinit(pinout); + if (bitbang_spi_init(&bitbang_spi_master_rayer)) return 1;

1 0

Re: [flashrom] [not working] Abit IS7 (P4)
by san 01 Oct '13

01 Oct '13

Hi again! I'm trying to "Try & Error method on GPIO pins" but not sure what to do: ====================== san@flashrom:~$ lspci | grep ISA 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) ====================== seems to be fine, but can not find anything usefull at: ====================== san@flashrom:~$ cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0073 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.1 0170-0177 : ata_piix 01f0-01f7 : 0000:00:1f.1 01f0-01f7 : ata_piix 0294-0297 : pnp 00:01 0376-0376 : 0000:00:1f.1 0376-0376 : ata_piix 0378-037a : parport0 03f2-03f2 : floppy 03f4-03f5 : floppy 03f6-03f6 : 0000:00:1f.1 03f6-03f6 : ata_piix 03f7-03f7 : floppy 03f8-03ff : serial 0400-04bf : pnp 00:0a 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0428-042f : ACPI GPE0_BLK 04d0-04d1 : pnp 00:01 0500-051f : 0000:00:1f.3 0a78-0a7b : pnp 00:01 0b78-0b7b : pnp 00:01 0bbc-0bbf : pnp 00:01 0cf8-0cff : PCI conf1 0e78-0e7b : pnp 00:01 0f78-0f7b : pnp 00:01 0fbc-0fbf : pnp 00:01 a000-afff : PCI Bus 0000:02 a000-a0ff : 0000:02:02.0 a000-a0ff : 8139too b000-b01f : 0000:00:1d.1 b000-b01f : uhci_hcd b400-b41f : 0000:00:1d.2 b400-b41f : uhci_hcd b800-b81f : 0000:00:1d.3 b800-b81f : uhci_hcd bc00-bc1f : 0000:00:1d.0 bc00-bc1f : uhci_hcd c000-c007 : 0000:00:1f.2 c000-c007 : ata_piix c400-c403 : 0000:00:1f.2 c400-c403 : ata_piix c800-c807 : 0000:00:1f.2 c800-c807 : ata_piix cc00-cc03 : 0000:00:1f.2 cc00-cc03 : ata_piix d000-d00f : 0000:00:1f.2 d000-d00f : ata_piix d800-d8ff : 0000:00:1f.5 d800-d8ff : Intel ICH5 dc00-dc3f : 0000:00:1f.5 dc00-dc3f : Intel ICH5 f000-f00f : 0000:00:1f.1 f000-f00f : ata_piix ====================== You can find bios dump on my server ( http://www.e-san.info/Go!/deeper!/Flashrom-Przemo/) and other files. Regards. 2013/10/1 san <san(a)plusnet.pl> > Hi! > > I'm trying to run flashrom on my platform but no luck. All info, bios etc. > are avalaible here: http://www.e-san.info/Go!/deeper!/Flashrom-Przemo/ > but i'll attach it too (without bios). > > Best Regards! > > -- > [ e-San.info | San(a)plusnet.pl ] > -- [ e-San.info | San(a)plusnet.pl ]

1 0

[not working] Abit IS7 (P4)
by san 01 Oct '13

01 Oct '13

Hi! I'm trying to run flashrom on my platform but no luck. All info, bios etc. are avalaible here: http://www.e-san.info/Go!/deeper!/Flashrom-Przemo/ but i'll attach it too (without bios). Best Regards! -- [ e-San.info | San(a)plusnet.pl ]

1 0

W836xx: ASUS A7N8X-X: flashrom -V
by Markas 29 Sep '13

29 Sep '13

Greetings flashrom folks, Below is some hopefully helpful output. Many thanks, Mark flashrom v0.9.6.1-r1705 on Linux 3.9.5-301.fc19.i686 (i686) flashrom was built with libpci 3.2.0, GCC 4.8.1 20130603 (Red Hat 4.8.1-1), little endian Command line (3 args): flashrom -V -o flashrom.log Using default programmer "internal". Calibrating delay loop... OS timer resolution is 1 usecs, 958M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1005 us, 10000 myus = 15085 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "ASUSTeK Computer INC." DMI string system-product-name: "A7N8X-X" DMI string system-version: "REV 2.xx" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "A7N8X-X" DMI string baseboard-version: "REV 2.xx" DMI string chassis-type: "Desktop" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 87. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE Super I/O, ID 0x8708 on port 0x2e Found chipset "NVIDIA NForce2" with PCI ID 10de:0060. Enabling flash write... OK. Super I/O ID 0x8708 is not on the list of flash capable controllers. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x2589, id2 0x002d Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0xaa, id2 0x6e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Found SST flash chip "SST49LF020" (256 kB, LPC) at physical address 0xfffc0000. Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x61 Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x66, id2 0x58, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xaa, id2 0x6e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x25, id2 0x53, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x61 Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x61 Found SST flash chip "SST49LF020" (256 kB, LPC). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x92

1 0

test flashrom on Gigabyte GA-Z68MA-D2H-B3 (rev. 1.3) mainboard
by Vangelis Skarmoutsos 28 Sep '13

28 Sep '13

The flashing succeeded. All worked perfect. Attachments: dump1 (flashrom -p internal -V) dump2 (lspci -nnvvxxx) dump3 (superiotool -deV) * * I would prefer if "-p internal" was the default (less typing). The tool is really easy to use but a GUI would be preferred. Thank you anyway for this wonderful tool.

1 0

Donations in Bitcoin
by Fabián Rodríguez 28 Sep '13

28 Sep '13

Hi, I am attending the GNU 30th anniversary hackathon/events and when I asked about donating in Bitcoin it was suggested I asked here. I'd like to make a donation, perhaps a project member can take it personally and then use it in the project. It would be nice to be able to donate on the site directly too. I prefer not to donate in cash in person as I need the currency for local use. Cheers, Fabian -- Fabián Rodríguez http://fsf.magicfab.ca

1 0

Detailed Log for untested Asrock B75M-ITX
by M. Duell 28 Sep '13

28 Sep '13

Hi, in the attachment is the detailed log as requested by flashrom -r backup.img -p internal. (I am using the current debian testing package of flashrom) Best, M. Duell

1 0

Re: [flashrom] problem with SST25VF040B
by Carl-Daniel Hailfinger 27 Sep '13

27 Sep '13

Hello Fabio, Am 25.09.2013 15:01 schrieb Fabio: > hello, I'm trying to retrieve a notebook with SST25VF040B, but is not > recognized by flashrom. I'm using a asus motherboard with Intel P67, > Winbond is that mounts originally riconoscituo while the SST25VF040B not. > What could I check? > thanks > > [...] > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x52bf > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x535f > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x72bf > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x72ff > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x73ff > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x7d, id2 0x7fff > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xfa, id2 0xa6bf > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xfa, id2 0xe57f > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xfa, id2 0xffff > RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xfc, id2 0xafff > [...] A SST25VF040B should have id1 0xbf, id2 0x258d. The values above look like some sort of corruption. All IDs returned by probe_spi_rdid_generic should have been identical. This corruption can be caused by: 1. Wrong voltage for the flash chip. flashrom can't change the default voltage on Intel chipsets. The SST25VF040B expects 2.7V-3.6V. 2. Wrong speed for the flash chip. flashrom uses 20 MHz on Intel chipsets. 3. Unstable connection to the flash chip. Are the wires too long (longer than 5 cm) or is there a soldering problem? You could try to use another programmer (e.g. Intel network card) for this flash chip. Maybe that works better. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] flashrom upgrade
by Carl-Daniel Hailfinger 27 Sep '13

27 Sep '13

Hi, it seems a part of your mail is missing. All we got was a partial log from flashrom and we don't know if you need help or if you want to report success or if there's anything else you need. Regards, Carl-Daniel Am 12.09.2013 20:44 schrieb it(a)sca-uk.com: > Super I/O ID 0x8712 is not on the list of flash capable controllers. > The following protocols are supported: SPI. > Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Chip status register is 00 > Chip status register: Status Register Write Disable (SRWD) is not set > Chip status register: Bit 6 is not set > Chip status register: Bit 5 / Block Protect 3 (BP3) is not set > Chip status register: Bit 4 / Block Protect 2 (BP2) is not set > Chip status register: Bit 3 / Block Protect 1 (BP1) is not set > Chip status register: Bit 2 / Block Protect 0 (BP0) is not set > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address > 0xfff00000. > Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 > Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 > Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 > Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 > Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 > Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. > Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. > Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. > Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 > Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. > Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, > id2 0x2014 > Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 > 0xc2, id2 0x2014 > Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, > id2 0x2014 > Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: > id1 0xc2, id2 0x2014 > Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, > id2 0x2014 > Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, > id2 0x2014 > Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 > 0x2014 > Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 > 0xc2, id2 0x2014 > Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 > 0xc2, id2 0x2014 > Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 > 0x13 > Found Macronix flash chip "MX25L8005" (1024 kB, SPI). > No operations were specified. -- http://www.hailfinger.org/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom