flashrom

flashrom@flashrom.org

6 participants
9186 discussions

Please report a bug at flashrom@flashrom.org...
by AreYouLoco? 10 Jul '14

10 Jul '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! I wanted to backup my bios. I am using latest version from svn repository. I've generated deb package with checkinstall -> flashrom_20140629-1_i386.deb Commands I entered and log: COMMAND: sudo flashrom -r BIOSBACKUP --programmer internal -V OUTPUT: flashrom v0.9.7-r1822 on Linux 3.13-0.bpo.1-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian Command line (5 args): flashrom -r BIOSBACKUP --programmer internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 3088M loops per second, 10 myus = 12 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 9996 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8H61-M LX" DMI string baseboard-version: "Rev x.0x" Found chipset "Intel H61" with PCI ID 8086:1c5c. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytesSPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0xf777c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: Management Engine region (0x00001000-0x0017ffff) is read-write. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW106, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW406A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FU406B, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF020A, 256 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF512A, 64 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF020, 256 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) at physical address 0xffc00000. Chip status register is 0x00. Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xd5, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xd5, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xd5, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x5e, id2 0xc9, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x2a, id2 0xd6, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xd5, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x2a, id2 0xd6, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xd5, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x5d, id2 0xd2, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32.V" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading flash... done. Restoring MMIO space at 0xf777f8a0 Restoring PCI config space for 00:1f:0 reg 0xdc Happy analyzing Regards! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Encrypt/Sign your emails with http://www.enigmail.net/ ! iQIcBAEBAgAGBQJTsDnEAAoJEMdXMIjot97aUZIP/37w0lcFral7Z7h55GHCIuxX /jIxBhSlWncuddyobZrcTQz5vKoUC01tDYaKQU8HlxWpx9Z+Caz/VNuHKSSIMyqh cX37YEjgmXDk1bn9rRl4sl7EE2Nr/4B3R5aerctPDKFjEgSYutAel/AZMuT3I+2Z 7O7AFeozOtaJm06ABFUtHvu5GdcXFSvflG+3u/ZGvWqA/Z4ZjZJIf4spmyj8gsp3 AKRPFDKHN9ZnR7oPl3IFWa9J4Ej5FRgRbDaiEOGYmbD90nb3V3cjIs0jBm0OJoiH IcrmfIYGYVZY+APlBHIR/1uD/u/kjQTvdILtXGAGM+LZDdoaJVmZLK2yPgjLwcrb TXuENCSIIcqamulT2S6XmE6F3DHFSm2qakp4fs2ghicdYY3B3MIW/9hn6ur+5VNq xKaWHfkithOuHYbK/53jdl2e673UbwuR9W7hCKBYzk3Rt7YwzgRUCMEt9FQ7EMbh oJ1yN0ZePCamckxDlhM//46G1bDGxH23Tas6dwXCOZrsXWEkWxAv/dX+ic3kjV3b UTAmnOVK4xim2IU1GW1A3ErD7gFr6TGZUo6yMPg6mjrSeBIR1wzf3rkKq8Na91gc 063uhb0VjKX2Srl9wvvIlTwzPFma1W2JOt0ca/kDiYDEJllSe2cHwTnprg5540Ds 03NEYOBEQiPJND/23A6u =Nhx6 -----END PGP SIGNATURE-----

3 2

Re: [flashrom] Exiting due to SIGSEGV
by John Pohlman 07 Jul '14

07 Jul '14

I have it loaded on a flash drive along with doslfn (Dos long file name) so that it doesn't error out with a file not found when it tries to access DMIDECODE (which with 8.3 convention is DMIDEC~1). First two boards that I ran this configuration on (with the jumper closed since these are HP XW9400) backed up the existing ROM without any problem and then flashed to one with the current boot block as it was supposed to. Third board, backed up the existing BIOS and then completed the reflash with verify and immediately after passing verification threw the error. This board is now bricked. Fourth board throws the error immediately after doing a backup of the flash or even a simple probe. This one I haven't flashed, so it didn't brick. So I tried to do a rom backup and probe with one of the first 2 boards since those passed without any problem, but it also now throws the error. It's not memory or processor since I'm using known good components. >>> Stefan Tauner 06/25/14 3:23 AM >>> On Tue, 24 Jun 2014 22:31:15 -0400 "John Pohlman" wrote: > I've got a strange one here flashing an HP XW9400 > > flashrom 0.9.6 running on FreeDos worked perfectly for reading and writing a bios but now it throws this error on exit along with an EIP error. > > The problem occurs on multiple boards even when doing something as simple as writing a bios dump. > > Anyone have any ideas? Hi, what does "now" mean? Did the flashrom version change, or anything else? Can you please post a log or at least an excerpt of one? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH][RESEND] uisp_spi support
by Andrew 06 Jul '14

06 Jul '14

Hello all! This is the resubmit of the uISP programmer support patch. A list of fixes follows: * Proper protocol versioning support. * Programmer now reports its name, SPI speed and CPU frequency * Programmer now allows setting the SPI frequency. While now this is done using spi_freq=xxx parameter (in Khz) * Programmer can now have an arbitary number of SPI flashes attached (on different SPI buses) and even allows several instances of flashrom to work with each of these flashes at the same time (option idx=N specifies the bus number to use, default is 0). * Speed improvements due to minor optimizations in firmware. (2Mib flash read was 2m13s now is only 1m15s) * Firmware can now be easily extended to add hardware other than uISP, even based on other MCUs. * Code cleaned up * Firmware code reworked for better portability. Since it's based off antares, STM32 is the next target. A full writeup with hardware pictures and nice benchmark graphs can be found in my blog here: http://ncrmnt.org/wp/2014/06/08/flashrom-benchmark-buspirate-vs-uisp/ Firmware source code can be found on github here: https://github.com/uISP/uisp-app-flashprog -- Regards, Andrew

2 1

Add support for Micronix MX29F022(N)T
by Daniele Forsi 04 Jul '14

04 Jul '14

Hello, I successfully tested the following patch with read, erase and write but I don't know how do I choose a value for .page_size? Signed-off-by: Daniele Forsi <dforsi(a)gmail.com> Index: flashchips.c =================================================================== --- flashchips.c (revision 1822) +++ flashchips.c (working copy) @@ -6996,6 +6996,38 @@ { .vendor = "Macronix", + .name = "MX29F022(N)T", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F022T, + .total_size = 256, + .page_size = 32 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", .name = "MX29F040", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID,

1 0

Confirming successful write for AT29C010A
by Daniele Forsi 04 Jul '14

04 Jul '14

This is the second mainboard that I try showing a message about finishing support for the W836xx Super I/O, the first was http://www.flashrom.org/pipermail/flashrom/2014-June/012651.html let me know if I can do more to help. Here is the output of flashrom -Vw for a successful write: flashrom v0.9.7-r1822 on Linux 3.2.0-4-486 (i586) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian Command line (4 args): flashrom -p internal:laptop=this_is_not_a_laptop -Vw coreboot.rom Calibrating delay loop... OS timer resolution is 16 usecs, 23M loops per second, delay more than 10% too short (got 73% of expected delay), recalculating... 23M loops per second, delay more than 10% too short (got 80% of expected delay), recalculating... 23M loops per second, delay more than 10% too short (got 80% of expected delay), recalculating... 23M loops per second, delay more than 10% too short (got 80% of expected delay), recalculating... 23M loops per second, delay loop is unreliable, trying to continue 10 myus = 23 us, 100 myus = 82 us, 1000 myus = 746 us, 10000 myus = 16299 us, 64 myus = 59 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI chassis-type is not specific enough. DMI string system-manufacturer: "PRAIM" DMI string system-product-name: "Primo" DMI string system-version: "04" DMI string baseboard-manufacturer: "PRAIM" DMI string baseboard-product-name: "PrimoHw01" DMI string baseboard-version: "04" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: e2. Please send the output of "flashrom -V -p internal" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "AMD CS5530(A)" with PCI ID 1078:0100. Enabling flash write... OK. The following protocols are supported: Parallel. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Found Atmel flash chip "AT29C010A" (128 kB, Parallel) at physical address 0xfffe0000. Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x5f1f, id2 0x001f Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29LV160BE, 2048 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29LV160TE, 2048 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xee Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xee Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5 Found Atmel flash chip "AT29C010A" (128 kB, Parallel). === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! coreboot last image size (not ROM size) is 131072 bytes. Manufacturer: ASI Mainboard ID: MB-5BLMP Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x01ffff:EW Erase/write done. Verifying flash... VERIFIED. Restoring PCI config space for 00:12:0 reg 0x5b Restoring PCI config space for 00:12:0 reg 0x52 -- Daniele Forsi

1 0

serprog:dev=/dev/ttyUSB0:2000000
by Alfin Cahya 03 Jul '14

03 Jul '14

/# flashrom -p serprog:dev=/dev/ttyUSB0:2000000 -Vw a6.bin flashrom v0.9.7-r1822 on Linux 3.8.0-29-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (4 args): flashrom -p serprog:dev=/dev/ttyUSB0:2000000 -Vw a6.bin Calibrating delay loop... OS timer resolution is 1 usecs, 1146M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 995 us, 10000 myus = 9989 us, 4 myus = 6 us, OK. Initializing serprog programmer Baud rate is 2000000 now. serprog: connected - attempting to synchronize .. serprog: Synchronized serprog: Interface version ok. serprog: Bus support: parallel=off, LPC=off, FWH=off, SPI=on Warning: Automatic command availability check failed for cmd 0x08 - won't execute cmd Warning: Automatic command availability check failed for cmd 0x11 - won't execute cmd serprog: Programmer name is "serprog-duino" serprog: Serial buffer size is 65535 serprog: Warning: Programmer does not support toggling its output drivers The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Found Eon flash chip "EN25QH128" (16384 kB, SPI) on serprog. Chip status register is 0x90. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0xe600 Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xfff3 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25VF512A, 64 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1c, id2 0x17 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Unknown SFDP-capable chip, 0 kB: Parsing JEDEC flash parameter table... done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7018 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1c, id2 0x17 Found Eon flash chip "EN25QH128" (16384 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Some block protection in effect, disabling... Need to disable the register lock first... done. disabled. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EW, 0x001000-0x001fff:W, 0x002000-0x002fff:EW, 0x003000-0x003fff:EW, 0x004000-0x004fff:EW, 0x005000-0x005fff:EW, 0x006000-0x006fff:EW, 0x007000-0x007fff:W, 0x008000-0x008fff:W, 0x009000-0x009fff:EFAILED at 0x00009996! Expected=0xff, Found=0x1f, failed byte count from 0x00009000-0x00009fff: 0x320 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x00ffff:EFAILED at 0x000012db! Expected=0xff, Found=0x18, failed byte count from 0x00000000-0x0000ffff: 0x70c4 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0xffffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00ffffff: 0x6f43f3 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0xffffff:EFAILED at 0x00001bc3! Expected=0xff, Found=0x03, failed byte count from 0x00000000-0x00ffffff: 0x6c7627 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks!

1 0

Support for >16MB chips with 4-byte addressing?
by Amelkin, Aleksandr 02 Jul '14

02 Jul '14

Hi. I've seen a number of patches that tried to add 4-byte addressed chips support to flashrom, but none of them seem to work on Winbond W25Q256FV (even provided the support for the chip is added with only full-chip erasers declared). Are there any plans on adding 4-byte addressed chips support into flashrom? I'm planning to work on that on my own, taking Mark Marshall's and Brian Rak's patches as a base: http://www.flashrom.org/pipermail/flashrom/2013-March/010759.html https://gist.github.com/devicenull/8735650 However if there is any ongoing activity on this topic and anyone has further (possibly incomplete) patches, please share as I couldn't find them. With best regards - Alexander Amelkin

1 0

Help read/writing ATMEL 120 25020N SI27 A
by Markus Moser 01 Jul '14

01 Jul '14

Hey, i've just played around with your software, and so far i'm pretty excited :) i couldn't get the GUI to compile, but the console version works fine :) i use it on a raspberry pi but i can't read from a chip i have on hand here... Because i need to preserve the data on the chip, i can't test writing right now, but i hope you can help me though :) Attatched you'll find a picture of the EEPROM, and the log file - but i doubt you can get anything useful from it, at least i couldn't :D I really hope you can help me with this - i struggle with this thing for days now x) Regards, Markus :)

1 0

Re: [flashrom] [PATCH 0/5] check_trans and probe_spi_rdid_edi
by Antonio Ospite 30 Jun '14

30 Jun '14

On Wed, 3 Oct 2012 06:13:00 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > This patch set enables us to figure out if transactions will succeed > without executing them, which allows for a refactoring of > probe_spi_rdid_generic() which in consequence makes it possible to add > probe_spi_rdid_edi(). > Hi Stefan, was there any development towards the functionality discussed in this old thread: check_trans() and probe_spi_rdid_edi()? > The infrastructure code as a whole, but especially the ichspi code > is heavily modified. Please be aware of that if you test it on > mainboards. > > Antonio: please rebase your Spansion patch on this one and extend it > to add actually two chips by using the full 32 bit model IDs > (0x20184d00, 0x20184d01) and .probe = probe_spi_rdid_edi. > I am playing with these chips again. FTR I am able to read and write S25FL129P1 chips using flashrom v0.9.7-r1782 which is in Debian ubstable, it supports the similar "S25FL128S......0", but only the bulk erase function worked (spi_block_erase_60), I wasn't able to do a block or sector erase; can this depend on the programmer (ft2232_spi)? I will send a proper log the next time I write a chip. I have also tried to rebase this old set about check_trans() and probe_spi_rdid_edi() on top of the latest svn, I will check if the code still works but I wanted to ask first what the current status is, and if there is still interest to support rdid EDI. Thanks, Antonio -- Antonio Ospite http://ao2.it A: Because it messes up the order in which people normally read text. See http://en.wikipedia.org/wiki/Posting_style Q: Why is top-posting such a bad thing?

1 2

T440p flashrom -V
by Martin Kjær Jørgensen 27 Jun '14

27 Jun '14

flashrom asked me to send you this output, so I did. Hope it helps. /Martin flashrom v0.9.7-r1782 on Linux 3.14-1-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 3313M loops per second, 10 myus = 10 us, 100 myus = 118 us, 1000 myus = 997 us, 10000 myus = 9897 us, 4 myus = 15 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. No DMI table found. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 00. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found chipset "Intel QM87" with PCI ID 8086:8c4f. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc21: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytesSPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x2b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x09 failed. New value is 0x2b. SPIBAR = 0x00007f85a7697000 + 0x3800 0x04: 0xf008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x50: 0x00004a4b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0x4b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x0bff0500 FREG1: BIOS region (0x00500000-0x00bfffff) is read-write. 0x5C: 0x04ff0003 FREG2: Warning: Management Engine region (0x00003000-0x004fffff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x78: 0x8bff0b40 PR1: Warning: 0x00b40000-0x00bfffff is read-only. 0x7C: 0x8adf0ab1 PR2: Warning: 0x00ab1000-0x00adffff is read-only. 0x80: 0x8ab00ab0 PR3: Warning: 0x00ab0000-0x00ab0fff is read-only. 0x84: 0x8aaf0800 PR4: Warning: 0x00800000-0x00aaffff is read-only. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 0x94: 0x0606 (PREOP) 0x96: 0x3f90 (OPTYPE) 0x98: 0x03013505 (OPMENU) 0x9C: 0x9f20d802 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x80802025 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x80002025 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00f12005 (FPB) Enabling hardware sequencing due to multiple flash chips detected. Density of ICH SPI component with index 1 is invalid. Encoded density is 0x6. OK. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 8192 kB. The flash address space (0x000000 - 0x7fffff) is divided at address 0x005000 in two partitions. The first partition ranges from 0x000000 to 0x004fff. In that range are 5 erase blocks with 4096 B each. The second partition ranges from 0x005000 to 0x7fffff. In that range are 2043 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x83, id2 0xc4, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x70, id2 0xf2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x70, id2 0xf2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x3b, id2 0x04, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x80, id2 0x03, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific). No operations were specified. Restoring MMIO space at 0x7f85a769a8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom