flashrom

flashrom@flashrom.org

5 participants
9161 discussions

Re: [flashrom] Add new Macronix MX25L6495F support
by David Hendricks 14 Nov '14

14 Nov '14

Hi Alex, Thanks for the patch. I uploaded a modified version to chromium.org's code review server here: https://chromium-review.googlesource.com/229697 On Wed, Oct 15, 2014 at 3:13 AM, <alexlu6(a)mxic.com.tw> wrote: > Dear sirs, > > This mail comes from Macronix to add the new MX25L6495F flash chip > support > in the flashrom project in order to help the adoption of the chip for > Google Chromium OS. > Please help to review it. Thanks a lot! > > Alex Lu > FAE SW manager > > > > CONFIDENTIALITY NOTE: > > This e-mail and any attachments may contain confidential information > and/or personal data, which is protected by applicable laws. Please be > reminded that duplication, disclosure, distribution, or use of this e-mail > (and/or its attachments) or any part thereof is prohibited. If you receive > this e-mail in error, please notify us immediately and delete this mail as > well as its attachment(s) from your system. In addition, please be informed > that collection, processing, and/or use of personal data is prohibited > unless expressly permitted by personal data protection laws. Thank you for > your attention and cooperation. > > Macronix International Co., Ltd. > > ===================================================================== > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Re: [flashrom] flashrom error ioctl
by Idwer Vollering 12 Nov '14

12 Nov '14

2014-11-11 21:26 GMT+01:00 Jorge Mesquita <jorge(a)jmtech.com.py>: > > Hi, im trying to program a flash on hardkernel's odroid u3, > > my paste is here any help would be appreciated, thanks. Quote from paste: root@odroid:/home/odroid/flashrom-0.9.7# ./flashrom -p linux_spi:dev=/dev/spidev1.0 -E flashrom v0.9.7-r1711 on Linux 3.8.13.28 (armv7l) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on linux_spi. Erasing and writing flash chip... linux_spi_send_command: ioctl: Input/output error Verification impossible because read failed at 0x0 (len 0x1000) ERASE FAILED! Reading current flash chip contents... linux_spi_send_command: ioctl: Input/output error Can't read anymore! Aborting. FAILED! Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! Can you re-run the same command, but this time add one -V parameter? Are you familiar with strace and/or gdb? Idwer

1 0

flashrom error ioctl
by Jorge Mesquita 11 Nov '14

11 Nov '14

Hi, im trying to program a flash on hardkernel's odroid u3 <http://www.hardkernel.com/main/products/prdt_info.php?g_code=G138745696275> , my paste is here <http://paste.flashrom.org/view.php?id=2687> any help would be appreciated, thanks. --

1 0

Unsupported MB
by Alexandr . 11 Nov '14

11 Nov '14

Flashrom for dos не работает на плате Acer M1610 LGA775 (SIS672 + SIS968) ROM W25X40 DIP Описание: http://acersupport.com/acerpanam/manuals/acer/0000/servicemanuals/S.G_AS_M1… Данные по: Flashrom -v -p internal lspci -nnvvvxxx предоставлять?

1 0

Re: [flashrom] flashrom support for read\write word\byte actions
by Carl-Daniel Hailfinger 09 Nov '14

09 Nov '14

Hi Chanan, On 09.11.2014 12:27, Peri, Chanan wrote: > Do you know what does this "core" of flashrom include in terms of dediprog API for more specific operations (sector erase, read\write byte\word)? Right now we use a common (to all programmers and all flash chips) abstraction in flashrom which allows you to read/write/erase down to arbitrary small sizes, but internally larger operations (usually sector-based) happen. Think of it like the 512 Byte sector emulation of 4 kB hard drives. This is the abstraction we plan to make publicly available as part of libflashrom. There is also an internal common command submission engine which can send arbitrary raw commands to a flash chip, one engine per flash bus (SPI, FWH/LPC/Parallel). This engine is also common to all programmers of the same flash bus type. > Would it be reasonably possible for me (using the source code of flashrom) to add what I need, even if it's specific to dediprog or to some specific flash type? I think it should be reasonably easy to do this generically (see spi25.c for code which does SPI command submission), and there is no reason to make this dediprog specific. The suggested course of action also depends on whether you want a simple "read some bytes, write some bytes, erase manually/automatically" interface, or whether you want explicit SPI command submission and want to handle all the nasty details (verifying write/erase, handling programmer errors) yourself. > Chanan. Regards, Carl-Daniel > -----Original Message----- > From: Stefan Tauner [mailto:stefan.tauner@alumni.tuwien.ac.at] > Sent: Sunday, November 09, 2014 11:48 > To: Peri, Chanan > Cc: flashrom(a)flashrom.org > Subject: Re: [flashrom] flashrom support for read\write word\byte actions > > currently there exist already some patches that allow to read and write single sectors with some preparation and the user interface is probably not what you want (I am talking about layout files that allow to define and operate on regions of flash space). > > The midterm plan is to make the core of flashrom more library-like, which would ease the creation of a special purpose tool like the one you probably require. Note that midterm in flashrom terms can mean some years since developer time has been rather scarce lately... > > All of that is pretty much programmer-agnostic because most of the time we specify exactly what is sent to the SPI (or other) bus. >

1 0

Re: [flashrom] GA-H77-DS3H (rev. 1.1) Trying to unmap a nonexisting mapping!
by Stefan Tauner 09 Nov '14

09 Nov '14

On Sun, 9 Nov 2014 14:04:55 +0600 Evgeniy Edigarev <edigarev(a)gmail.com> wrote: > Hello. > It's just a program output, but new BIOS was installed with no problems. Hello Evgeniy, thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. If possible, please always include a (verbose) log with such reports so that we can verify them and also look for oddities that might be interesting for our future work, thanks. > # flashrom --programmer internal -r F7.bin > flashrom v0.9.7-r1782 on Linux 3.16-3-amd64 (x86_64) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found chipset "Intel H77". Enabling flash write... Warning: SPI > Configuration Lockdown activated. > OK. > Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address > 0xff800000. > Trying to unmap a nonexisting mapping! > Please report a bug at flashrom(a)flashrom.org > […] That one is known and fixed already, thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] flashrom support for read\write word\byte actions
by Stefan Tauner 09 Nov '14

09 Nov '14

On Sun, 9 Nov 2014 08:29:21 +0000 "Peri, Chanan" <chanan.peri(a)intel.com> wrote: > Hi, > From what I see, flashrom only support full erase\read\write actions for the entire flash chip. > Is there any support for more specific actions - like erase sector? Read\write word\byte? > If not, is there any plan to support such a thing. > > I'm asking specifically about the DediProg programmer, but I'll be interested to know if this can be done with other programmers. Hello, currently there exist already some patches that allow to read and write single sectors with some preparation and the user interface is probably not what you want (I am talking about layout files that allow to define and operate on regions of flash space). The midterm plan is to make the core of flashrom more library-like, which would ease the creation of a special purpose tool like the one you probably require. Note that midterm in flashrom terms can mean some years since developer time has been rather scarce lately... All of that is pretty much programmer-agnostic because most of the time we specify exactly what is sent to the SPI (or other) bus. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

flashrom support for read\write word\byte actions
by Peri, Chanan 09 Nov '14

09 Nov '14

Hi, >From what I see, flashrom only support full erase\read\write actions for the entire flash chip. Is there any support for more specific actions - like erase sector? Read\write word\byte? If not, is there any plan to support such a thing. I'm asking specifically about the DediProg programmer, but I'll be interested to know if this can be done with other programmers. Thanks, Chanan Peri Intel Corporation |DCG, CSIG, CSE Controllers , SV MNG --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

1 0

GA-H77-DS3H (rev. 1.1) Trying to unmap a nonexisting mapping!
by Evgeniy Edigarev 09 Nov '14

09 Nov '14

Hello. It's just a program output, but new BIOS was installed with no problems. # flashrom --programmer internal -r F7.bin flashrom v0.9.7-r1782 on Linux 3.16-3-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel H77". Enabling flash write... Warning: SPI Configuration Lockdown activated. OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Reading flash... done. # flashrom -w /home/sysop/Downloads/H77DS3H.F10 --programmer internal flashrom v0.9.7-r1782 on Linux 3.16-3-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel H77". Enabling flash write... Warning: SPI Configuration Lockdown activated. OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.

1 0

Re: [flashrom] Write protection problem on PEGATRON IPIEL-LA3 motherboard of HP Pro 3010
by Smoluszek 08 Nov '14

08 Nov '14

And output from the most recent flashrom version: sudo flashrom -p internal -V -c W25X80 -w eu35.17.1.rom flashrom v0.9.7-r1854 on Linux 3.13.0-39-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (7 args): flashrom -p internal -V -c W25X80 -w eu35.17.1.rom Calibrating delay loop... OS timer resolution is 1 usecs, 1289M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10000 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "PEGATRON CORPORATION" DMI string baseboard-product-name: "2A94" DMI string baseboard-version: "1.03" Found chipset "Intel ICH10" with PCI ID 8086:3a18. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0x461: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI) Top Swap: not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching disabled, caching enabled, BIOS_CNTL = 0x02: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: Setting Bios Control at 0xdc from 0x02 to 0x01 failed. New value is 0x02. SPIBAR = 0x00007fd97b4b4000 + 0x3800 0x04: 0xa008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x007f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x543b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0006019f (OPMENU+4) PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Found Winbond flash chip "W25X80" (1024 kB, SPI) mapped at physical address 0x00000000fff00000. Chip status register is 0x02. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=0 Running OPCODE 0x20 failed at address 0x000000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x00ffff:EInvalid OPCODE 0xd8, will not execute. spi_block_erase_d8 failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x0fffff:EInvalid OPCODE 0xc7, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed.Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. Restoring PCI config space for 00:1f:0 reg 0xdc On 8 November 2014 20:15, Smoluszek <smoluszek(a)gmail.com> wrote: > Hello, > > I'm trying to flash BIOS of motherboard PEGATRON IPIEL-LA3 - > http://goo.gl/xh4qVa > > Done that successfully before, but I must have uploaded a write protected > bios last time. > > Output of flashrom -p internal -VVV -c W25X80 can be found here: > http://paste.flashrom.org/view.php?id=2686 > > I've also tried flashing with Raspberyy PI via ROM_RECOVERY header on the > motherboard, but managed only to detect and read, but each read gave > somewhat different file. > > Any hints how can I override BIOS_CNTL? > > Thanks in advance! > Smoluch > > >

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom