- flashrom - mail.coreboot.org

Re: [flashrom] (no subject)
by Idwer Vollering 19 Jul '12

19 Jul '12

2012/7/19 Riccardo Berto <riccardobrt(a)gmail.com>: > > > ok lol > > thanks for the explanation > btw I think that with battery on it and connected to AC you can use a > laptop > safely (with battery you avoid instant shutdowns) No, the battery isn't there to prevent unexpected poweroffs. Read the following two wiki pages, there you'll find out more about why we strongly discourage running flashrom on laptops/mobile hardware. http://flashrom.org/Laptops http://flashrom.org/Laptop_enable

1 0

Re: [flashrom] (no subject)
by Stefan Tauner 19 Jul '12

19 Jul '12

On Thu, 19 Jul 2012 17:20:46 +0200 Riccardo Berto <riccardobrt(a)gmail.com> wrote: > ok lol > > thanks for the explanation > btw I think that with battery on it and connected to AC you can use a > laptop safely (with battery you avoid instant shutdowns) no that problem is not the supply of power (that is actually a plus for laptops compared to desktops without an UPS), but the internal workings of most laptops. they include a chip called embedded controller that runs its own software and controls things like the backlight of the display or charging the battery. the problem is that these chips are often near the flash chip logically and flashrom sometimes irritates them enough that they just shut down the whole machine. the main reason why this can happen is that they are not documented publicly at all, see also http://flashrom.org/Laptops -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] (no subject)
by Stefan Tauner 19 Jul '12

19 Jul '12

On Thu, 19 Jul 2012 16:52:43 +0200 Riccardo Berto <riccardobrt(a)gmail.com> wrote: > didn't understand to send only if it has succes. > > > sorry but i'm a noob in hardware questions, all the things i can tell you > is that I have this > pc<http://www.hackerscomputer.com/art/id15255/acer/acer-aspire-5740g-624g64mn-…> > (mb Mobile > Intel HM55 Express). thank you, that was what i was looking for. at first i presumed you were running flashrom on a desktop machine. flashrom tries to detect this (with dmidecode) but failed, hence my confusion. the reason it checks that at all is that running flashrom on laptops can be dangerous (e.g. instant shutdowns). it was not in your case but please refrain from running it on other laptops. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] (no subject)
by Stefan Tauner 19 Jul '12

19 Jul '12

On Thu, 19 Jul 2012 13:31:03 +0200 Riccardo Berto <riccardobrt(a)gmail.com> wrote: > in the output of the program, it says to send to this email the verbose > output if I have untested chip Hello and thanks for your report, actually the message requested you to send an email if one of READ, ERASE or WRITE worked, but that was apparently not the case, and probing was already marked as working on that chip. But there is something else in your log that is interesting to us: the locked ME region. Which mainboard model is that? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

(no subject)
by Riccardo Berto 19 Jul '12

19 Jul '12

> > in the output of the program, it says to send to this email the verbose > output if I have untested chip So here you are *flashrom v0.9.5.2-r1515 on Linux 3.4.5-1-ARCH (x86_64), built with libpci 3.1.9, GCC 4.6.3, little endian* *flashrom is free software, get the source code at http://www.flashrom.org* * * *Calibrating delay loop... OS timer resolution is 1 usecs, 1555M loops per second, 10 myus = 9 us, 100 myus = 104 us, 1000 myus = 969 us, 10000 myus = 9748 us, 4 myus = 4 us, OK.* *Initializing internal programmer* *No coreboot table found.* *sh: dmidecode: command not found* *dmidecode execution unsuccessful - continuing without DMI info* *Found chipset "Intel HM55" with PCI ID 8086:3b09. * *This chipset is marked as untested. If you are using an up-to-date version* *of flashrom please email a report to flashrom(a)flashrom.org including a* *verbose (-V) log. Thank you!* *Enabling flash write... * *0xfff80000/0xffb80000 FWH IDSEL: 0x0* *0xfff00000/0xffb00000 FWH IDSEL: 0x0* *0xffe80000/0xffa80000 FWH IDSEL: 0x0* *0xffe00000/0xffa00000 FWH IDSEL: 0x0* *0xffd80000/0xff980000 FWH IDSEL: 0x0* *0xffd00000/0xff900000 FWH IDSEL: 0x0* *0xffc80000/0xff880000 FWH IDSEL: 0x0* *0xffc00000/0xff800000 FWH IDSEL: 0x0* *0xff700000/0xff300000 FWH IDSEL: 0x4* *0xff600000/0xff200000 FWH IDSEL: 0x5* *0xff500000/0xff100000 FWH IDSEL: 0x6* *0xff400000/0xff000000 FWH IDSEL: 0x7* *0xfff80000/0xffb80000 FWH decode enabled* *0xfff00000/0xffb00000 FWH decode enabled* *0xffe80000/0xffa80000 FWH decode enabled* *0xffe00000/0xffa00000 FWH decode enabled* *0xffd80000/0xff980000 FWH decode enabled* *0xffd00000/0xff900000 FWH decode enabled* *0xffc80000/0xff880000 FWH decode enabled* *0xffc00000/0xff800000 FWH decode enabled* *0xff700000/0xff300000 FWH decode enabled* *0xff600000/0xff200000 FWH decode enabled* *0xff500000/0xff100000 FWH decode enabled* *0xff400000/0xff000000 FWH decode enabled* *Maximum FWH chip size: 0x400000 bytes* *BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0* *Root Complex Register Block address = 0xfed1c000* *GCS = 0xc60: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI)* *Top Swap : not enabled* *SPIBAR = 0xfed1c000 + 0x3800* *0x04: 0x6008 (HSFS)* *HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 * *Programming OPCODES... * *program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190* *done* *0x06: 0x3f04 (HSFC)* *HSFC: FGO=0, FCYCLE=2, FDBC=63, SME=0* *0x08: 0x00000000 (FADDR)* *0x50: 0x00000a0b (FRAP)* *BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b* *0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only.* *0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write.* *0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked.* *Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on* *http://flashrom.org/Supported_hardware#Supported_mainboards yet.* *Writes have been disabled. You can enforce write support with the* *ich_spi_force programmer option, but it will most likely harm your hardware!* *If you force flashrom you will get no support if something breaks.* *0x90: 0x04 (SSFS)* *SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0* *0x91: 0xf84140 (SSFC)* *SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0* *0x94: 0x5006 (PREOP)* *0x96: 0x463b (OPTYPE)* *0x98: 0x05d80302 (OPMENU)* *0x9C: 0xc79f0190 (OPMENU+4)* *0xA0: 0x00000000 (BBAR)* *0xC4: 0x00802005 (LVSCC)* *LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1* *0xC8: 0x00002005 (UVSCC)* *UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0* *0xD0: 0x00000000 (FPB)* * * *SPI Read Configuration: prefetching disabled, caching enabled, OK.* *The following protocols are supported: FWH, SPI.* *Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST SST25LF040A, 512 kB: * *program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190* *on-the-fly OPCODE (0xAB) re-programmed, op-pos=2* *probe_spi_res2: id1 0x15, id2 0x15* *Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15* *Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x15* *Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x15* *Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15* *Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID.* *Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID.* *Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016 * *Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016 * *Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID.* *Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Chip status register is 00* *Found Winbond flash chip "W25X32" (4096 kB, SPI) at physical address 0xffc00000.* *Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Unknown SFDP-capable chip, 0 kB: * *program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190* *on-the-fly OPCODE (0x5A) re-programmed, op-pos=2* *No SFDP signature found.* *Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3016* *Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15* *Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x74, id2 0x05, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xab, id2 0x3d, id1 is normal flash content, id2 is normal flash content* *Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x89, id2 0x6e, id1 is normal flash content, id2 is normal flash content* *Found Winbond flash chip "W25X32" (4096 kB, SPI).* *===* *This flash part has status UNTESTED for operations: READ ERASE WRITE* *The test status of this chip may have been updated in the latest development* *version of flashrom. If you are running the latest development version,* *please email a report to flashrom(a)flashrom.org if any of the above operations* *work correctly for you with this flash part. Please include the flashrom* *output with the additional -V option for all operations you tested (-V, -Vr,* *-VE, -Vw), and mention which mainboard or programmer you tested.* *Please mention your board in the subject line. Thanks for your help!* *No operations were specified.* *Restoring MMIO space at 0x7f34ce9b58a0* *Restoring MMIO space at 0x7f34ce9b589c* *Restoring MMIO space at 0x7f34ce9b5898* *Restoring MMIO space at 0x7f34ce9b5896* *Restoring MMIO space at 0x7f34ce9b5894* *Restoring PCI config space for 00:1f:0 reg 0xdc*

1 0

FAILED: MS-7302
by Miloud Malagouen 19 Jul '12

19 Jul '12

Dear Sir, I bricked a MSI MS-7302 motherboard with a bad coreboot image. I'm trying to flash the bios with a C232HM-DDHSL-0 FTDI USB cable<http://www.ftdichip.com/Products/Cables/USBMPSSE.htm>using the MSI JSPI1 Header <http://www.coreboot.org/MSI_JSPI1> present on the board for SPI connection. The FTDI cable uses a FT232H chip witch is capable of providing a USB to SPI, I2C or JTAG interface. The FTDI D2XX Linux driver cited that the FT232H chip has type number 6 (while the FT4232H has type 5), so i had to modify the file */usr/include/ftdi.h* and change the ftdi_chip_type enumeration definition: /** FTDI chip type */ enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2, TYPE_R=3, TYPE_2232H=4, TYPE_4232H=5,*TYPE_232H=6* }; I had to add support to the FT232H chip (vid=0403 pid=6014) in the * ft2232_spi* programmer of flashrom. I's very simple. Here is the patch of file ft2232_spi.c: =======================BEGIN DIFF================================ --- flashrom/ft2232_spi.c 2012-07-19 03:43:28.866724677 +0200 +++ flashrom-0.9.5.2-r1547/ft2232_spi.c 2012-07-16 05:16:53.000000000 +0200 @@ -34,6 +34,7 @@ #define FTDI_VID 0x0403 #define FTDI_FT2232H_PID 0x6010 #define FTDI_FT4232H_PID 0x6011 +#define FTDI_FT232H_PID 0x6014 #define TIAO_TUMPA_PID 0x8a98 #define AMONTEC_JTAGKEY_PID 0xCFF8 @@ -52,6 +53,7 @@ const struct usbdev_status devs_ft2232spi[] = { {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, + {FTDI_VID, FTDI_FT232H_PID, NT, "FTDI", "FT232H"}, {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"}, @@ -185,6 +187,8 @@ int ft2232_spi_init(void) ft2232_type = FTDI_FT2232H_PID; else if (!strcasecmp(arg, "4232H")) ft2232_type = FTDI_FT4232H_PID; + else if (!strcasecmp(arg, "232H")) + ft2232_type = FTDI_FT232H_PID; else if (!strcasecmp(arg, "jtagkey")) { ft2232_type = AMONTEC_JTAGKEY_PID; ft2232_interface = INTERFACE_A; @@ -285,7 +289,7 @@ int ft2232_spi_init(void) return -4; } - if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) { + if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H && ftdic->type != TYPE_232H) { msg_pdbg("FTDI chip type %d is not high-speed\n", ftdic->type); clock_5x = 0; =======================END DIFF================================== The flash memory is probed correctly but erase an write operations failed. Here is flashrom command (bold) and output: ____________________________________________________________________________________ *flashrom -p ft2232_spi:type=232H,port=A -w A7302AMS.160* flashrom v0.9.5.2-runknown on Linux 3.4.4-5.fc17.i686.PAE (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found Winbond flash chip "W25X80" (1024 kB, SPI) on ft2232_spi. Reading old flash chip contents... done. Erasing and writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x00000fff: 0x10 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x00000000! Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x0000ffff: 0x100 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x00000000! Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x000fffff: 0xffc ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! ____________________________________________________________________________________ The chip is powered with an external PSU (3.3V orange cable of an ATX PSU). I will try with a 1200F capacitor on the VCC link. I hope this is just a magnetic noise issue. Thank you.

1 0

Re: [flashrom] FAILED: NVIDIA MCP61
by Stefan Tauner 18 Jul '12

18 Jul '12

On Wed, 18 Jul 2012 17:12:14 -0400 William Speirs <wspeirs(a)apache.org> wrote: > So if restoring the backup ROM worked am I safe to power cycle my machine? yes > Any ideas on what would be wrong with that ROM? not yet. but it is not related to the image itself pretty sure (there is a theoretical chance that there is a bad bit, that is in the right state in the old image but not in the new image, but that is quite unlikely). more likely is that there is some (partial) copy protection in place... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] FAILED: NVIDIA MCP61
by William Speirs 18 Jul '12

18 Jul '12

So if restoring the backup ROM worked am I safe to power cycle my machine? Any ideas on what would be wrong with that ROM? Thanks... Bill- On Jul 17, 2012 8:49 PM, "William Speirs" <wspeirs(a)apache.org> wrote: > I was able to write the backup and run verify and it worked. I still > haven't and won't restart my machine. > > After restoring the backup, I tried again with the new BIOS and got the > same error/issue. I was able to backup yet again without issue. > > So I'm guessing it's more of a problem with the ROM image than the program > writing the ROM. I've attached the ROM to see if that provides any insight. > > Thanks again for the help! > > Bill- > > On Tue, Jul 17, 2012 at 8:22 PM, William Speirs <wspeirs(a)apache.org>wrote: > >> I will try writing the backup and certainly leave the machine on. >> >> Thanks, and get some sleep ;-) >> >> Bill- >> On Jul 17, 2012 8:20 PM, "Stefan Tauner" < >> stefan.tauner(a)student.tuwien.ac.at> wrote: >> >>> On Tue, 17 Jul 2012 19:39:31 -0400 >>> William Speirs <wspeirs(a)apache.org> wrote: >>> >>> > I tried a flashrom -r and compared it to the backup I made and it's >>> > different. It is also different from the ROM I tried to install. >>> > >>> > Any thoughts? >>> >>> Most importantly: dont reboot or shutdown that computer. (we really >>> mean it... but some users do it anyway, and brick their boards that >>> way) >>> >>> i would try writing the backup image again to get to a safe state >>> again. the reason why it failed in the first place is not obvious to >>> me, but it is 2:00 AM here, so i might be overlooking something. >>> -- >>> Kind regards/Mit freundlichen Grüßen, Stefan Tauner >>> >> >

1 0

Re: [flashrom] FAILED: NVIDIA MCP61
by William Speirs 18 Jul '12

18 Jul '12

I was able to write the backup and run verify and it worked. I still haven't and won't restart my machine. After restoring the backup, I tried again with the new BIOS and got the same error/issue. I was able to backup yet again without issue. So I'm guessing it's more of a problem with the ROM image than the program writing the ROM. I've attached the ROM to see if that provides any insight. Thanks again for the help! Bill- On Tue, Jul 17, 2012 at 8:22 PM, William Speirs <wspeirs(a)apache.org> wrote: > I will try writing the backup and certainly leave the machine on. > > Thanks, and get some sleep ;-) > > Bill- > On Jul 17, 2012 8:20 PM, "Stefan Tauner" < > stefan.tauner(a)student.tuwien.ac.at> wrote: > >> On Tue, 17 Jul 2012 19:39:31 -0400 >> William Speirs <wspeirs(a)apache.org> wrote: >> >> > I tried a flashrom -r and compared it to the backup I made and it's >> > different. It is also different from the ROM I tried to install. >> > >> > Any thoughts? >> >> Most importantly: dont reboot or shutdown that computer. (we really >> mean it... but some users do it anyway, and brick their boards that >> way) >> >> i would try writing the backup image again to get to a safe state >> again. the reason why it failed in the first place is not obvious to >> me, but it is 2:00 AM here, so i might be overlooking something. >> -- >> Kind regards/Mit freundlichen Grüßen, Stefan Tauner >> > A non-text attachment has been stripped: M2N_0902.ROM It is available at http://paste.flashrom.org/view.php?id05

1 0

Re: [flashrom] FAILED: NVIDIA MCP61
by Stefan Tauner 18 Jul '12

18 Jul '12

On Tue, 17 Jul 2012 19:39:31 -0400 William Speirs <wspeirs(a)apache.org> wrote: > I tried a flashrom -r and compared it to the backup I made and it's > different. It is also different from the ROM I tried to install. > > Any thoughts? Most importantly: dont reboot or shutdown that computer. (we really mean it... but some users do it anyway, and brick their boards that way) i would try writing the backup image again to get to a safe state again. the reason why it failed in the first place is not obvious to me, but it is 2:00 AM here, so i might be overlooking something. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

MSI Z68MA-G45 report and on-board SPI flashing using Bus Pirate
by Paul Kocialkowski 18 Jul '12

18 Jul '12

I recently got myself a MSI Z68MA-G45 board. It's running with an Intel Z68 chipset, which has some support in flashrom and coreboot. First, I ran flashrom with the system on the board and it was able to correctly read the chip (see attached log). I uploaded the read data [1]. The UEFI interface proposed to save the UEFI image on usb storage [2]: I was then able to compare it to the read data from flashrom. It appears that the UEFI image are the last 0x600000 bytes of the BIOS ROM image (from 0x200000 to 0x7FFFFF). While searching for the BIOS chip on the board hardware, I saw a set of pins called "JSPI1", right next to the BIOS SPI chip [3]. After some research [4][5], I used this pin layout: [6]. The only SPI flasher I have is a Bus Pirate, that I used with flashrom at different spispeeds, but it never worked (it was only returning either 0xff or 0x00) (see attached logs). I used connectors from an USB on-board connector (9 pins) but had to take them off the plastic as the pins disposal didn't match the JSPI1 disposal (the pins are closer to each other than on USB on-board connectors). Fearing that the connectors would touch each other, I put adhesive tape around to isolate them [7]. As it still didn't work, I put some of the connectors of the bus pirate (I have a probe cable) directly on the pins, but it was only possible for 4 of them and used my hand-made cables for the rest [8]. Though, it still didn't work. Any lead on this would be welcome. According to http://www.flashrom.org/ISP it can be because of cable length: are the buspirate probe cables too long for this? [9] [1] http://download.paulk.fr/coreboot/msi-z68ma-g45/bios.rom [2] http://download.paulk.fr/coreboot/msi-z68ma-g45/E7676IMS.H10.rom [3] http://download.paulk.fr/coreboot/msi-z68ma-g45/photos/spi-chip-pins.jpg [4] http://soj.mesdiscussions.net/soj/Electronique/Autres/projet-adaptateur-har… [5] http://forum-en.msi.com/index.php?topic=139099.0 [6] http://download.paulk.fr/coreboot/msi-z68ma-g45/photos/spi-pins.png [7] http://download.paulk.fr/coreboot/msi-z68ma-g45/photos/connectors.jpg [8] http://download.paulk.fr/coreboot/msi-z68ma-g45/photos/on-pins-connectors.j… [9] http://download.paulk.fr/coreboot/msi-z68ma-g45/photos/buspirate.jpg -- Paul Kocialkowski

3 5

FAILED: NVIDIA MCP61
by William Speirs 18 Jul '12

18 Jul '12

$ flashrom -w M2N_0902.ROM flashrom v0.9.5.2-r1517 on Linux 3.2.0-26-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "NVIDIA MCP61". Enabling flash write... This chipset is not really supported yet. Guesswork... Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Found Winbond flash chip "W39V040C" (512 kB, LPC) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4f, failed byte count from 0x00000000-0x0000ffff: 0x10000 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x00010000! Expected=0xff, Read=0xdf, failed byte count from 0x00000000-0x0007ffff: 0x652aa ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! I tried a flashrom -r and compared it to the backup I made and it's different. It is also different from the ROM I tried to install. Any thoughts? Bill-

1 0

flashrom -V
by William Speirs 18 Jul '12

18 Jul '12

flashrom v0.9.5.2-r1517 on Linux 3.2.0-26-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 702M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10007 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8716 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. No IT87* serial flash segment enabled. The following protocols are supported: LPC. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x37, id2 0xc2, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x50 Found Winbond flash chip "W39V040C" (512 kB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x50 Found Winbond flash chip "W39V040C" (512 kB, LPC). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88

1 0

output of flashrom -Vr
by Juraj Lutter 18 Jul '12

18 Jul '12

otis@zed ~/code/flashrom-1.0 $ sudo ./flashrom -Vr xx flashrom v0.9.5.2-r1538 on Linux 3.2.0-2-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Command line (2 args): ./flashrom -Vr xx Calibrating delay loop... OS timer resolution is 1 usecs, 1415M loops per second, 10 myus = 10 us, 100 myus = 117 us, 1000 myus = 973 us, 10000 myus = 9945 us, 4 myus = 8 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Z400 Workstation" DMI string system-version: " " DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "0AE4h" DMI string baseboard-version: "Not Specified" DMI string chassis-type: "Mini Tower" Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2 WARNING: Setting 0xdc from 0x2 to 0x3 on ICH10R failed. New value is 0x2. Root Complex Register Block address = 0xfed1c000 GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xa008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x08: 0x001fffc0 (FADDR) 0x74: 0x81ff01f0 PR0: WARNING: 0x001f0000-0x001fffff is read-only. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x007f40 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=63, SME=0, SCF=0 0x94: 0x0606 (PREOP) 0x96: 0xb6f0 (OPTYPE) 0x98: 0x0220059f (OPMENU) 0x9C: 0x03020103 (OPMENU+4) 0xA0: 0x00000000 (BBAR) SPI Read Configuration: prefetching disabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Chip status register is 10 Found Atmel flash chip "AT26DF161" (2048 kB, SPI) at physical address 0xffe00000. Chip status register is 10 Chip status register: Sector Protection Register Lock (SRPL) is not set Chip status register: Bit 6 is not set Chip status register: Erase/Program Error (EPE) is not set Chip status register: WP# pin (WPP) is not asserted Chip status register: Software Protection Status (SWP): no sectors are protected Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4600 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x22, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x22, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x22, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x78, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x22, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x22, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x18, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Atmel flash chip "AT26DF161" (2048 kB, SPI). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Some block protection in effect, disabling Block protection could not be disabled! Reading flash... done. Restoring MMIO space at 0x7f80c933b8a0 Restoring PCI config space for 00:1f:0 reg 0xdc -- Juraj Lutter | /\ ASCII Ribbon Campaign otis (at) wilbury (dot) sk | \/ - NO HTML/RTF in e-mail http://www.wilbury.sk/ | /\ - NO Word docs in e-mail JID: otis (at) jabber (dot) vx (dot) sk !07/11 PDP a ni deppart m'I !pleH

2 1

Log for Gigabyte GA-H61M-D2-B3
by user 18 Jul '12

18 Jul '12

Log for Gigabyte GA-H61M-D2-B3 motherboard on a Intel H61 chipset for read and write operations.

2 1

Re: [flashrom] Supermicro X9DR3-F output
by Stefan Tauner 18 Jul '12

18 Jul '12

On Thu, 21 Jun 2012 17:38:16 -0400 Rich <rercola(a)pha.jhu.edu> wrote: > 0x58: 0x0fff0800 FREG1: BIOS region (0x00800000-0x00ffffff) is read-write. > 0x5C: 0x07ff0020 FREG2: WARNING: Management Engine region (0x00020000-0x007fffff) is locked. Hello Rich, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. Note to other developers: Also notable is the flash chip (nymonix N25Q128) that is currently not supported natively (patch pending: http://patchwork.coreboot.org/patch/3652/), but our SFDP implementation seems to would have handled it correctly afaics. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

ASUS M3N78 PRO
by Brad Rogers 18 Jul '12

18 Jul '12

Hello All, Just flashed mobo, ASUS M3N78 PRO. No problems encountered, using v0.9.5.2-r1548 of flashrom. -- Regards _ / ) "The blindingly obvious is / _)rad never immediately apparent" It's got nothing to do with the need to impress Titanic (My Over) Reaction - 999

2 2

Re: [flashrom] Intel C602 support
by Stefan Tauner 17 Jul '12

17 Jul '12

On Tue, 17 Jul 2012 11:35:00 -0700 Greg Schardt <gschardt(a)ddn.com> wrote: > Flashrom is not detecting the device for some reason. I am attaching the output of 'flashrom -V' and 'lspci -s 0:1f.0 -vv'. Please help. > … > flashrom v0.9.2-r1141 on Linux 2.6.39-alta-22 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian > flashrom is free software, get the source code at http://www.flashrom.org 0.9.2 is ancient, please update. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1548 - trunk
by repository service 16 Jul '12

16 Jul '12

Author: hailfinger Date: Mon Jul 16 23:32:19 2012 New Revision: 1548 URL: http://flashrom.org/trac/flashrom/changeset/1548 Log: Check vendor_id for PCI based external programmers. Restructure PCI device detection code. Rename pcidev_validate to pcidev_readbar. Note: Slight changes in behaviour are possible, especially on dual/quad chip NICs which appear as more than one PCI device. Found devices are no longer printed at _pinfo level, but rather at _pdbg level. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/nicintel.c trunk/pcidev.c trunk/programmer.h Modified: trunk/nicintel.c ============================================================================== --- trunk/nicintel.c Sat Jun 30 01:07:14 2012 (r1547) +++ trunk/nicintel.c Mon Jul 16 23:32:19 2012 (r1548) @@ -87,7 +87,7 @@ goto error_out_unmap; /* FIXME: Using pcidev_dev _will_ cause pretty explosions in the future. */ - addr = pcidev_validate(pcidev_dev, PCI_BASE_ADDRESS_0, nics_intel); + addr = pcidev_readbar(pcidev_dev, PCI_BASE_ADDRESS_0); /* FIXME: This is not an aligned mapping. Use 4k? */ nicintel_control_bar = physmap("Intel NIC control/status reg", addr, NICINTEL_CONTROL_MEMMAP_SIZE); Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Sat Jun 30 01:07:14 2012 (r1547) +++ trunk/pcidev.c Mon Jul 16 23:32:19 2012 (r1548) @@ -35,157 +35,122 @@ TYPE_UNKNOWN }; -uintptr_t pcidev_validate(struct pci_dev *dev, int bar, - const struct pcidev_status *devs) +uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) { - int i; uint64_t addr; uint32_t upperaddr; uint8_t headertype; uint16_t supported_cycles; enum pci_bartype bartype = TYPE_UNKNOWN; - for (i = 0; devs[i].device_name != NULL; i++) { - if (dev->device_id != devs[i].device_id) - continue; - - msg_pinfo("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", - devs[i].vendor_name, devs[i].device_name, - dev->vendor_id, dev->device_id, dev->bus, dev->dev, - dev->func); - - headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; - msg_pspew("PCI header type 0x%02x\n", headertype); - - /* - * Don't use dev->base_addr[x] (as value for 'bar'), won't - * work on older libpci. - */ - addr = pci_read_long(dev, bar); - - /* Sanity checks. */ - switch (headertype) { - case PCI_HEADER_TYPE_NORMAL: - switch (bar) { - case PCI_BASE_ADDRESS_0: - case PCI_BASE_ADDRESS_1: - case PCI_BASE_ADDRESS_2: - case PCI_BASE_ADDRESS_3: - case PCI_BASE_ADDRESS_4: - case PCI_BASE_ADDRESS_5: - if ((addr & PCI_BASE_ADDRESS_SPACE) == - PCI_BASE_ADDRESS_SPACE_IO) - bartype = TYPE_IOBAR; - else - bartype = TYPE_MEMBAR; - break; - case PCI_ROM_ADDRESS: - bartype = TYPE_ROMBAR; - break; - } + + headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; + msg_pspew("PCI header type 0x%02x\n", headertype); + + /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ + addr = pci_read_long(dev, bar); + + /* Sanity checks. */ + switch (headertype) { + case PCI_HEADER_TYPE_NORMAL: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + if ((addr & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; break; - case PCI_HEADER_TYPE_BRIDGE: - switch (bar) { - case PCI_BASE_ADDRESS_0: - case PCI_BASE_ADDRESS_1: - if ((addr & PCI_BASE_ADDRESS_SPACE) == - PCI_BASE_ADDRESS_SPACE_IO) - bartype = TYPE_IOBAR; - else - bartype = TYPE_MEMBAR; - break; - case PCI_ROM_ADDRESS1: - bartype = TYPE_ROMBAR; - break; - } + case PCI_ROM_ADDRESS: + bartype = TYPE_ROMBAR; break; - case PCI_HEADER_TYPE_CARDBUS: + } + break; + case PCI_HEADER_TYPE_BRIDGE: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + if ((addr & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; break; - default: - msg_perr("Unknown PCI header type 0x%02x, BAR type " - "cannot be determined reliably.\n", headertype); + case PCI_ROM_ADDRESS1: + bartype = TYPE_ROMBAR; break; } + break; + case PCI_HEADER_TYPE_CARDBUS: + break; + default: + msg_perr("Unknown PCI header type 0x%02x, BAR type cannot be determined reliably.\n", + headertype); + break; + } - supported_cycles = pci_read_word(dev, PCI_COMMAND); + supported_cycles = pci_read_word(dev, PCI_COMMAND); - msg_pdbg("Requested BAR is "); - switch (bartype) { - case TYPE_MEMBAR: - msg_pdbg("MEM"); - if (!(supported_cycles & PCI_COMMAND_MEMORY)) { - msg_perr("MEM BAR access requested, but device " - "has MEM space accesses disabled.\n"); - /* TODO: Abort here? */ - } - msg_pdbg(", %sbit, %sprefetchable\n", - ((addr & 0x6) == 0x0) ? "32" : - (((addr & 0x6) == 0x4) ? "64" : "reserved"), - (addr & 0x8) ? "" : "not "); - if ((addr & 0x6) == 0x4) { - /* The spec says that a 64-bit register consumes - * two subsequent dword locations. - */ - upperaddr = pci_read_long(dev, bar + 4); - if (upperaddr != 0x00000000) { - /* Fun! A real 64-bit resource. */ - if (sizeof(uintptr_t) != sizeof(uint64_t)) { - msg_perr("BAR unreachable!"); - /* TODO: Really abort here? If - * multiple PCI devices match, - * we might never tell the user - * about the other devices. - */ - return 0; - } - addr |= (uint64_t)upperaddr << 32; + msg_pdbg("Requested BAR is "); + switch (bartype) { + case TYPE_MEMBAR: + msg_pdbg("MEM"); + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } + msg_pdbg(", %sbit, %sprefetchable\n", + ((addr & 0x6) == 0x0) ? "32" : (((addr & 0x6) == 0x4) ? "64" : "reserved"), + (addr & 0x8) ? "" : "not "); + if ((addr & 0x6) == 0x4) { + /* The spec says that a 64-bit register consumes + * two subsequent dword locations. + */ + upperaddr = pci_read_long(dev, bar + 4); + if (upperaddr != 0x00000000) { + /* Fun! A real 64-bit resource. */ + if (sizeof(uintptr_t) != sizeof(uint64_t)) { + msg_perr("BAR unreachable!"); + /* TODO: Really abort here? If multiple PCI devices match, + * we might never tell the user about the other devices. + */ + return 0; } + addr |= (uint64_t)upperaddr << 32; } - addr &= PCI_BASE_ADDRESS_MEM_MASK; - break; - case TYPE_IOBAR: - msg_pdbg("I/O\n"); + } + addr &= PCI_BASE_ADDRESS_MEM_MASK; + break; + case TYPE_IOBAR: + msg_pdbg("I/O\n"); #if __FLASHROM_HAVE_OUTB__ - if (!(supported_cycles & PCI_COMMAND_IO)) { - msg_perr("I/O BAR access requested, but device " - "has I/O space accesses disabled.\n"); - /* TODO: Abort here? */ - } + if (!(supported_cycles & PCI_COMMAND_IO)) { + msg_perr("I/O BAR access requested, but device has I/O space accesses disabled.\n"); + /* TODO: Abort here? */ + } #else - msg_perr("I/O BAR access requested, but flashrom does " - "not support I/O BAR access on this platform " - "(yet).\n"); + msg_perr("I/O BAR access requested, but flashrom does not support I/O BAR access on this " + "platform (yet).\n"); #endif - addr &= PCI_BASE_ADDRESS_IO_MASK; - break; - case TYPE_ROMBAR: - msg_pdbg("ROM\n"); - /* Not sure if this check is needed. */ - if (!(supported_cycles & PCI_COMMAND_MEMORY)) { - msg_perr("MEM BAR access requested, but device " - "has MEM space accesses disabled.\n"); - /* TODO: Abort here? */ - } - addr &= PCI_ROM_ADDRESS_MASK; - break; - case TYPE_UNKNOWN: - msg_perr("BAR type unknown, please report a bug at " - "flashrom(a)flashrom.org\n"); - } - - if (devs[i].status == NT) { - msg_pinfo("===\nThis PCI device is UNTESTED. Please " - "report the 'flashrom -p xxxx' output \n" - "to flashrom(a)flashrom.org if it works " - "for you. Please add the name of your\n" - "PCI device to the subject. Thank you for " - "your help!\n===\n"); + addr &= PCI_BASE_ADDRESS_IO_MASK; + break; + case TYPE_ROMBAR: + msg_pdbg("ROM\n"); + /* Not sure if this check is needed. */ + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ } - - return (uintptr_t)addr; + addr &= PCI_ROM_ADDRESS_MASK; + break; + case TYPE_UNKNOWN: + msg_perr("BAR type unknown, please report a bug at flashrom(a)flashrom.org\n"); } - return 0; + return (uintptr_t)addr; } uintptr_t pcidev_init(int bar, const struct pcidev_status *devs) @@ -195,6 +160,7 @@ char *pcidev_bdf; char *msg = NULL; int found = 0; + int i; uintptr_t addr = 0, curaddr = 0; pacc = pci_alloc(); /* Get the pci_access structure */ @@ -214,10 +180,29 @@ for (dev = pacc->devices; dev; dev = dev->next) { if (pci_filter_match(&filter, dev)) { + /* Check against list of supported devices. */ + for (i = 0; devs[i].device_name != NULL; i++) + if ((dev->vendor_id == devs[i].vendor_id) && + (dev->device_id == devs[i].device_id)) + break; + /* Not supported, try the next one. */ + if (devs[i].device_name == NULL) + continue; + + msg_pdbg("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", devs[i].vendor_name, + devs[i].device_name, dev->vendor_id, dev->device_id, dev->bus, dev->dev, + dev->func); + if (devs[i].status == NT) + msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p " + "xxxx' output \n" + "to flashrom(a)flashrom.org if it works for you. Please add the name " + "of your\n" + "PCI device to the subject. Thank you for your help!\n===\n"); + /* FIXME: We should count all matching devices, not * just those with a valid BAR. */ - if ((addr = pcidev_validate(dev, bar, devs)) != 0) { + if ((addr = pcidev_readbar(dev, bar)) != 0) { curaddr = addr; pcidev_dev = dev; found++; @@ -230,10 +215,8 @@ msg_perr("Error: No supported PCI device found.\n"); exit(1); } else if (found > 1) { - msg_perr("Error: Multiple supported PCI devices found. " - "Use 'flashrom -p xxxx:pci=bb:dd.f' \n" - "to explicitly select the card with the given BDF " - "(PCI bus, device, function).\n"); + msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f' \n" + "to explicitly select the card with the given BDF (PCI bus, device, function).\n"); exit(1); } Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Jun 30 01:07:14 2012 (r1547) +++ trunk/programmer.h Mon Jul 16 23:32:19 2012 (r1548) @@ -227,7 +227,7 @@ const char *vendor_name; const char *device_name; }; -uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs); +uintptr_t pcidev_readbar(struct pci_dev *dev, int bar); uintptr_t pcidev_init(int bar, const struct pcidev_status *devs); /* rpci_write_* are reversible writes. The original PCI config space register * contents will be restored on shutdown.

1 0

Re: [flashrom] add Numonyx/Micron N25Q128
by Stefan Tauner 16 Jul '12

16 Jul '12

On Wed, 11 Jul 2012 16:10:49 +0200 frederic.temporelli(a)bull.net wrote: Hello Frederic, > the main idea is to unlock the regions from the ME > Document with datails about ME messages for X79/C600 are Intel > Restricted... :-( that is/was our main idea too, but since we could not obtain the needed docs and my REing skills are not as good as needed there was little progress in that direction. i have documented most of what i could find out in our documentation, see http://flashrom.org/trac/flashrom/browser/trunk/Documentation/mysteries_int… if you can spot any errors or can provide more detail i am happy to refine (and use) it. > But seems that ME messages (HMRFPO and others) used in Maho Bay and Chief > River platform are the same, > and "BIOS Writers Guide" for these systems (document 490124) is only > "Intel Confidential" (and HMRFPO is described in this document...) > I hope that Intel will soon set all these documents available to > everybody... hope does not really help... :) do you have any clear indications that they might open them up? > note: there are lot of work to do... first, there's only one IOCTL > developed in mei driver (mei driver may be the best way to interact with > ME...) i have an almost complete (but unpublished) user-space reimplementation of the parts of the linux kernel MEI driver that is needed to send the HMRFPO message from flashrom... if i would know the GUIDs and payloads to send (and receive on success), there could be ME unlocking support in a matter of days i think. > Other topic (may be more related to layout feature): currently, when using > flashrom for BIOS upgrade, Serial Numbers and some other information in > DMI are overwritten... > (seen on Supermicro motherboards) > I don't have details, but it may be nice to investigate this issue... yes this happens sometimes but flashrom is not the right place to fix it. flashrom has the goal to read and write images to flash chips. if the images are not suited for the system the flash chip is used afterwards then it is per definition not our problem. one could of course use (lib)flashrom as a backend and create something that downloads and prepares correct images for all possible systems... but the person implementing this is not in sight yet ;) so the most realistic approach for such problems for now is that you prepare such images by hand or some customized tools/binary diffs, sorry that there is nothing better than that yet. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Output of Flashrom for Asus M2N68-VM
by juergen.bullinger＠gmx.de 16 Jul '12

16 Jul '12

Hi, thank you for the great tool it saved me from messing ouround with DOS boot dics etc on a system which is purely running on Linux. I updated the bios of this board and in case the diagnostic output of this board is interesting for you, here is it: juergen@media:/scratch/software/bios$ sudo flashrom [sudo] password for juergen: flashrom v0.9.5.2-r1517 on Linux 3.2.0-25-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "NVIDIA MCP67". Enabling flash write... This chipset is not really supported yet. Guesswork... SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified. -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

2 1

Re: [flashrom] Lenovo Ideapad S205
by Stefan Tauner 16 Jul '12

16 Jul '12

On Wed, 9 May 2012 14:41:33 +0100 Horatiu Bota <horatiubota(a)gmail.com> wrote: > flashrom v0.9.5.2-r1517 on Linux 3.2.0-20-generic (x86_64), built with > libpci 3.1.8, GCC 4.6.3, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 546M loops per > second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 995 us, 10000 myus > = 9973 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "LENOVO" > DMI string system-product-name: "Brazos" > DMI string system-version: "Ideapad S205" > DMI string baseboard-manufacturer: "LENOVO" > DMI string baseboard-product-name: "Inagua" > DMI string baseboard-version: "109-B78210-00A" > DMI string chassis-type: "Notebook" > Laptop detected via DMI. Hello Horatiu and thanks for your report! Could you please send us the output of 'lspci -nnvvvxxx' and 'superiotool -deV' too? It looks like an embedded controller guards the access to the flash chip and above commands hopefully allow us to identify it. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] flashrom output for chipset Intel QM67
by Stefan Tauner 16 Jul '12

16 Jul '12

On Thu, 21 Jun 2012 10:37:49 +0100 David Jones <dj61451(a)gmail.com> wrote: > Hi, > > I have a Dell E6520 laptop that I'd like to read the flash rom image from. > No need to write (yet). Flashrom say its supports the chipset but then > fails (using the latest svn version). To help you out I've attached the > verbose output. > > This laptop is not in use and happy to risk bricking it if it helps you > guys out. If there's anything I can do just let me know, game for > experimenting and jumping into the code if you can give some pointers. Probably not very interesting to you David, but i have added the laptop to our list of unsupported hardware (this wont change for a while as previously mentioned). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Intel DH61AG not working
by Marek Zakrzewski 16 Jul '12

16 Jul '12

flashrom v0.9.5.2-r1515 on Linux 3.2.13-grsec-xxxx-grs-ipv6-64 (x86_64), built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-52), little endian flashrom is free software, get the source code at http://www.flashrom.org Please run "flashrom --help" for usage info. flashrom v0.9.5.2-r1515 on Linux 3.2.13-grsec-xxxx-grs-ipv6-64 (x86_64), built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-52), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3230M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1012 us, 10000 myus = 10058 us, 4 myus = 5 us, OK. Initializing internal programmer dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2 WARNING: Setting 0xdc from 0x2 to 0x3 on H61 failed. New value is 0x2. Root Complex Register Block address = 0xfed1c000 GCS = 0xc01: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00003000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0185 FREG1: BIOS region (0x00185000-0x003fffff) is read-write. 0x5C: 0x01840003 FREG2: WARNING: Management Engine region (0x00003000-0x00184fff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xfc0000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=4 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching disabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x64, id2 0xb2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x64, id2 0xb2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading flash... SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=4 Running OPCODE 0x03 failed at address 0x003000 (payload length was 64). FAILED. Restoring MMIO space at 0x7fc7126af8a0 Restoring PCI config space for 00:1f:0 reg 0xdc Error accessing low megabyte, 0x100000 bytes at 0x00000000 /dev/mem mmap failed: Operation not permitted Failed getting access to coreboot low tables. -s: No such file or directory Transaction error! Read operation failed!

2 1

Asus M4N78 PRO
by Tyler 16 Jul '12

16 Jul '12

Just flashed my motherboard ROM. Worked great Thanks.

2 1

Laptop: HP Compaq nc6320 tests...
by Denis 'GNUtoo' Carikli 16 Jul '12

16 Jul '12

Hi, It seems that flashing the vendor BIOS works on the HP Compaq nc6320: ----------------------------------------------------------------------- flashrom v0.9.5.2-r1539 on Linux 3.0.0-20-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Command line (3 args): ../../../flashrom/flashrom -V -p internal:laptop=force_I_want_a_brick Calibrating delay loop... OS timer resolution is 1 usecs, 1985M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 997 us, 10000 myus = 9986 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: " " DMI string system-version: "F.0E" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "30AA" DMI string baseboard-version: "KBC Version 58.13" DMI string chassis-type: "Notebook" Laptop detected via DMI. Found chipset "Intel ICH7M" with PCI ID 8086:27b9. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed90000 GCS = 0x30460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed90000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x0030 (SPIC) 0x04: 0x000001a3 (SPIA) 0x08: 0x00000000 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x7f48 (OPTYPE) 0x58: 0x0405039f (OPMENU) 0x5c: 0x0102d852 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Chip status register is 00 Found Numonyx flash chip "M25PE80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Numonyx flash chip "M25PE80" (1024 kB, SPI). No operations were specified. Restoring MMIO space at 0x7fce6eb80070 Restoring PCI config space for 00:1f:0 reg 0xdc ----------------------------------------------------------------------- flashrom v0.9.5.2-r1539 on Linux 3.0.0-20-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Command line (5 args): ../../../flashrom/flashrom -V -p internal:laptop=force_I_want_a_brick -r rom.bin Calibrating delay loop... OS timer resolution is 1 usecs, 1985M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1014 us, 10000 myus = 9971 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: " " DMI string system-version: "F.0E" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "30AA" DMI string baseboard-version: "KBC Version 58.13" DMI string chassis-type: "Notebook" Laptop detected via DMI. Found chipset "Intel ICH7M" with PCI ID 8086:27b9. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed90000 GCS = 0x30460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed90000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4200 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x00148020 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x7f48 (OPTYPE) 0x58: 0x0405039f (OPMENU) 0x5c: 0x0102d852 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Chip status register is 00 Found Numonyx flash chip "M25PE80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Numonyx flash chip "M25PE80" (1024 kB, SPI). Reading flash... done. Restoring MMIO space at 0x7fcc3a7be070 Restoring PCI config space for 00:1f:0 reg 0xdc ----------------------------------------------------------------------- flashrom v0.9.5.2-r1539 on Linux 3.0.0-20-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Command line (5 args): ../../../flashrom/flashrom -V -p internal:laptop=force_I_want_a_brick -w ../68YDU.BIN Calibrating delay loop... OS timer resolution is 1 usecs, 1989M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1006 us, 10000 myus = 10008 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: " " DMI string system-version: "F.0E" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "30AA" DMI string baseboard-version: "KBC Version 58.13" DMI string chassis-type: "Notebook" Laptop detected via DMI. Found chipset "Intel ICH7M" with PCI ID 8086:27b9. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed90000 GCS = 0x30460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed90000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x7f10 (SPIC) 0x04: 0x000fffc0 (SPIA) 0x08: 0xffffffff (SPID0) 0x0c: 0xffffffff (SPID0+4) 0x10: 0xffffffff (SPID1) 0x14: 0xffffffff (SPID1+4) 0x18: 0xffffffff (SPID2) 0x1c: 0xffffffff (SPID2+4) 0x20: 0xffffffff (SPID3) 0x24: 0xffffffff (SPID3+4) 0x28: 0xfffeffe0 (SPID4) 0x2c: 0xfff00000 (SPID4+4) 0x30: 0x20054004 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x3091f5e9 (SPID6) 0x3c: 0x37312f34 (SPID6+4) 0x40: 0x5937302f (SPID7) 0x44: 0xec294455 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x7f48 (OPTYPE) 0x58: 0x0405039f (OPMENU) 0x5c: 0x0102d852 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Chip status register is 00 Found Numonyx flash chip "M25PE80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x8014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Numonyx flash chip "M25PE80" (1024 kB, SPI). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0x7f9530808070 Restoring PCI config space for 00:1f:0 reg 0xdc ------------------------------------------------------------ however the first time I flashed the BIOS I had(without -V): root@gnutoo-hplaptop:/home/gnutoo/Coreboot/BIOS/Laptop/test# ../../../flashrom/flashrom -p internal:laptop=force_I_want_a_brick -w ../68YDU.BIN > flashrom_write.log ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. spi_block_erase_20 failed during command execution at address 0x0 And: # md5sum ../68YDU.BIN a88ba88d1384a5a4d25d902c370927ab ../68YDU.BIN # ../../../flashrom/flashrom -p internal:laptop=force_I_want_a_brick -r rom3.bin > flashrom_read3.log ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. # md5sum rom3.bin a88ba88d1384a5a4d25d902c370927ab rom3.bin I'll reboot and look if it still works, if it doesn't I'll have to re-solder wires on the BIOS chip and reprogram it like I did before. Denis.

2 2

Rom regions in memory and on chip?
by Ryan VanRiper 16 Jul '12

16 Jul '12

Wondering about how flash rom's typically operate in memory and if they are always/sometimes copied too and executed in physical memory? I'm guessing yes, as it's faster then running directly from the chip. If so, any idea if these memory regions are consistently the same on each boot ? Also, does it make sense to dump both the rom on the board, and the copied to memory rom ?

1 0

flashrom can't support "Intel C202" + "W25Q64"
by coolwzq 16 Jul '12

16 Jul '12

Hi Flashrom, flashrom v0.9.5.2-r1515 can't support "Intel C202" + "W25Q64", can you help me? Please see the attached file for more details. Thanks, Tom

2 1

[PATCH] Bus Pirate: Speedup and firmware workarounds
by Carl-Daniel Hailfinger 15 Jul '12

15 Jul '12

Bus Pirate Firmware v5.5 and newer support a new SPI binary mode. Use it if available. Bus Pirate Firmware v6.1 and older have broken (too slow) SPI clock divisor for any requested speed above 2 MHz. Force a downgrade to 2 MHz for affected firmware versions. flashrom will recommend to upgrade the Bus Pirate Firmware if it is older than v6.2. Somewhat tested, code still needs to be cleaned up in a few spots. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_newcommands/buspirate_spi.c =================================================================== --- flashrom-buspirate_newcommands/buspirate_spi.c (Revision 1541) +++ flashrom-buspirate_newcommands/buspirate_spi.c (Arbeitskopie) @@ -50,6 +50,7 @@ #define sp_flush_incoming(...) 0 #endif +static int buspirate_interface_version; static unsigned char *bp_commbuf = NULL; static int bp_commbufsize = 0; @@ -83,7 +84,8 @@ msg_perr("Zero length command!\n"); return 1; } - msg_pspew("Sending"); + if (writecnt) + msg_pspew("Sending"); for (i = 0; i < writecnt; i++) msg_pspew(" 0x%02x", buf[i]); #ifdef FAKE_COMMUNICATION @@ -103,23 +105,36 @@ if (ret) return ret; #endif - msg_pspew(", receiving"); + if (readcnt) + msg_pspew(", receiving"); for (i = 0; i < readcnt; i++) msg_pspew(" 0x%02x", buf[i]); msg_pspew("\n"); return 0; } -static int buspirate_spi_send_command(struct flashctx *flash, - unsigned int writecnt, - unsigned int readcnt, - const unsigned char *writearr, - unsigned char *readarr); +static int buspirate_wait_for_string(unsigned char *buf, char *key) +{ + unsigned int keylen = strlen(key); + int ret; -static const struct spi_programmer spi_programmer_buspirate = { + ret = buspirate_sendrecv(buf, 0, keylen); + while (!ret) { + if (!memcmp(buf, key, keylen)) + return 0; + memmove(buf, buf + 1, keylen - 1); + ret = buspirate_sendrecv(buf + keylen - 1, 0, 1); + } + return ret; +} + +static int buspirate_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr); + +static struct spi_programmer spi_programmer_buspirate = { .type = SPI_CONTROLLER_BUSPIRATE, - .max_data_read = 12, - .max_data_write = 12, + .max_data_read = MAX_DATA_UNSPECIFIED, + .max_data_write = MAX_DATA_UNSPECIFIED, .command = buspirate_spi_send_command, .multicommand = default_spi_send_multicommand, .read = default_spi_read, @@ -138,6 +153,53 @@ {NULL, 0x0}, }; +int buspirate_spi_set_config(unsigned char *buf, int spispeed) +{ + int ret; + + /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ + buf[0] = 0x40 | 0xb; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_perr("Protocol error while setting power/CS/AUX!\n"); + return 1; + } + + /* Set SPI speed */ + buf[0] = 0x60 | spispeed; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_perr("Protocol error while setting SPI speed!\n"); + return 1; + } + + /* Set SPI config: output type, idle, clock edge, sample */ + buf[0] = 0x80 | 0xa; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_perr("Protocol error while setting SPI config!\n"); + return 1; + } + + /* De-assert CS# */ + buf[0] = 0x03; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_perr("Protocol error while raising CS#!\n"); + return 1; + } + + return 0; +} + static int buspirate_spi_shutdown(void *data) { int ret = 0, ret2 = 0; @@ -180,10 +242,15 @@ return ret; } +#define BP_VERSION(a,b) ((a) << 8 | (b)) + int buspirate_spi_init(void) { char *dev = NULL; char *speed = NULL; + char *tmp; + unsigned int fw_version_major = 0; + unsigned int fw_version_minor = 0; int spispeed = 0x7; int ret = 0; int i; @@ -208,9 +275,6 @@ } free(speed); - /* This works because speeds numbering starts at 0 and is contiguous. */ - msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed].name); - /* Default buffer size is 19: 16 bytes data, 3 bytes control. */ #define DEFAULT_BUFSIZE (16 + 3) bp_commbuf = malloc(DEFAULT_BUFSIZE); @@ -233,106 +297,160 @@ if (register_shutdown(buspirate_spi_shutdown, NULL)) return 1; - /* This is the brute force version, but it should work. */ - for (i = 0; i < 19; i++) { + /* This is the brute force version, but it should work. + * It is likely to fail if a previous flashrom run was aborted during a write with the new SPI commands + * in firmware v5.4 because that firmware may wait for up to 4096 bytes of input before responding to + * 0x00 again. The obvious workaround (sending 4096 bytes of \0) may cause significant startup delays. + */ + for (i = 0; i < 20; i++) { /* Enter raw bitbang mode */ bp_commbuf[0] = 0x00; /* Send the command, don't read the response. */ ret = buspirate_sendrecv(bp_commbuf, 1, 0); if (ret) return ret; - /* Read any response and discard it. */ - sp_flush_incoming(); + /* The old way to handle responses from a Bus Pirate already in BBIO mode was to flush any + * response which came in over serial. Unfortunately that does not work reliably on Linux + * with FTDI USB-serial. + */ + //sp_flush_incoming(); } - /* USB is slow. The Bus Pirate is even slower. Apparently the flush - * action above is too fast or too early. Some stuff still remains in - * the pipe after the flush above, and one additional flush is not - * sufficient either. Use a 1.5 ms delay inside the loop to make - * mostly sure that at least one USB frame had time to arrive. - * Looping only 5 times is not sufficient and causes the - * occasional failure. - * Folding the delay into the loop above is not reliable either. - */ - for (i = 0; i < 10; i++) { - usleep(1500); - /* Read any response and discard it. */ - sp_flush_incoming(); + /* We know that 20 commands of \0 should elicit at least one BBIO1 response. */ + if ((ret = buspirate_wait_for_string(bp_commbuf, "BBIO"))) + return ret; + + /* Reset the Bus Pirate. */ + bp_commbuf[0] = 0x0f; + /* Send the command, don't read the response. */ + if ((ret = buspirate_sendrecv(bp_commbuf, 1, 0))) + return ret; + if ((ret = buspirate_wait_for_string(bp_commbuf, "irate "))) + return ret; + /* Read the hardware version string. Last byte of the buffer is reserved for \0. */ + for (i = 0; i < DEFAULT_BUFSIZE - 1; i++) { + if ((ret = buspirate_sendrecv(bp_commbuf + i, 0, 1))) + return ret; + if (strchr("\r\n\t ", bp_commbuf[i])) + break; } + bp_commbuf[i] = '\0'; + msg_pdbg("Detected Bus Pirate hardware %s\n", bp_commbuf); + + if ((ret = buspirate_wait_for_string(bp_commbuf, "irmware "))) + return ret; + /* Read the firmware version string. Last byte of the buffer is reserved for \0. */ + for (i = 0; i < DEFAULT_BUFSIZE - 1; i++) { + if ((ret = buspirate_sendrecv(bp_commbuf + i, 0, 1))) + return ret; + if (strchr("\r\n\t ", bp_commbuf[i])) + break; + } + bp_commbuf[i] = '\0'; + msg_pdbg("Detected Bus Pirate firmware %s ", bp_commbuf); + if (bp_commbuf[0] != 'v') + msg_pdbg("(unknown version number format)\n"); + else if (!strchr("0123456789", bp_commbuf[1])) + msg_pdbg("(unknown version number format)\n"); + else { + fw_version_major = strtoul((char *)bp_commbuf + 1, &tmp, 10); + while ((*tmp != '\0') && !strchr("0123456789", *tmp)) + tmp++; + fw_version_minor = strtoul(tmp, NULL, 10); + msg_pdbg("(%u.%u)\n", fw_version_major, fw_version_minor); + } + + if ((ret = buspirate_wait_for_string(bp_commbuf, "HiZ>"))) + return ret; + + /* Workaround for broken speed settings in firmware 6.1 and older. */ + if (BP_VERSION(fw_version_major, fw_version_minor) < BP_VERSION(6, 2)) + if (spispeed > 0x4) { + msg_perr("Bus Pirate firmware 6.1 and older does not support SPI speeds above 2 MHz. " + "Limiting speed to 2 MHz.\n"); + msg_pinfo("It is recommended to upgrade to firmware 6.2 or newer.\n"); + spispeed = 0x4; + } + + /* Tell the user about missing fast mode in firmware 5.4 and older. */ + if (BP_VERSION(fw_version_major, fw_version_minor) < BP_VERSION(5, 5)) { + msg_pinfo("Bus Pirate firmware 5.4 and older does not support fast SPI access.\n"); + msg_pinfo("It is recommended to upgrade to firmware 6.2 or newer.\n"); + } + + /* This works because speeds numbering starts at 0 and is contiguous. */ + msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed].name); + /* Enter raw bitbang mode */ - bp_commbuf[0] = 0x00; - ret = buspirate_sendrecv(bp_commbuf, 1, 5); - if (ret) + for (i = 0; i < 20; i++) { + bp_commbuf[0] = 0x00; + if ((ret = buspirate_sendrecv(bp_commbuf, 1, 0))) + return ret; + } + if ((ret = buspirate_wait_for_string(bp_commbuf, "BBIO"))) return ret; - if (memcmp(bp_commbuf, "BBIO", 4)) { - msg_perr("Entering raw bitbang mode failed!\n"); - msg_pdbg("Got %02x%02x%02x%02x%02x\n", - bp_commbuf[0], bp_commbuf[1], bp_commbuf[2], - bp_commbuf[3], bp_commbuf[4]); + if ((ret = buspirate_sendrecv(bp_commbuf, 0, 1))) + return ret; + msg_pdbg("Raw bitbang mode version %c\n", bp_commbuf[0]); + if (bp_commbuf[0] != '1') { + msg_perr("Can't handle raw bitbang mode version %c!\n", bp_commbuf[0]); return 1; } - msg_pdbg("Raw bitbang mode version %c\n", bp_commbuf[4]); - if (bp_commbuf[4] != '1') { - msg_perr("Can't handle raw bitbang mode version %c!\n", - bp_commbuf[4]); - return 1; - } /* Enter raw SPI mode */ bp_commbuf[0] = 0x01; - ret = buspirate_sendrecv(bp_commbuf, 1, 4); - if (ret) + ret = buspirate_sendrecv(bp_commbuf, 1, 0); + if ((ret = buspirate_wait_for_string(bp_commbuf, "SPI"))) return ret; - if (memcmp(bp_commbuf, "SPI", 3)) { - msg_perr("Entering raw SPI mode failed!\n"); - msg_pdbg("Got %02x%02x%02x%02x\n", - bp_commbuf[0], bp_commbuf[1], bp_commbuf[2], - bp_commbuf[3]); + if ((ret = buspirate_sendrecv(bp_commbuf, 0, 1))) + return ret; + msg_pdbg("Raw SPI mode version %c\n", bp_commbuf[0]); + if (bp_commbuf[0] != '1') { + msg_perr("Can't handle raw SPI mode version %c!\n", bp_commbuf[0]); return 1; } - msg_pdbg("Raw SPI mode version %c\n", bp_commbuf[3]); - if (bp_commbuf[3] != '1') { - msg_perr("Can't handle raw SPI mode version %c!\n", - bp_commbuf[3]); - return 1; - } - /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ - bp_commbuf[0] = 0x40 | 0xb; - ret = buspirate_sendrecv(bp_commbuf, 1, 1); - if (ret) + if (buspirate_spi_set_config(bp_commbuf, spispeed)) return 1; - if (bp_commbuf[0] != 0x01) { - msg_perr("Protocol error while setting power/CS/AUX!\n"); - return 1; - } - /* Set SPI speed */ - bp_commbuf[0] = 0x60 | spispeed; - ret = buspirate_sendrecv(bp_commbuf, 1, 1); + /* Test combined SPI write/read, length 0. */ + bp_commbuf[0] = 0x04; + bp_commbuf[1] = 0; + bp_commbuf[2] = 0; + bp_commbuf[3] = 0; + bp_commbuf[4] = 0; + ret = buspirate_sendrecv(bp_commbuf, 5, 1); if (ret) return 1; if (bp_commbuf[0] != 0x01) { - msg_perr("Protocol error while setting SPI speed!\n"); - return 1; - } - - /* Set SPI config: output type, idle, clock edge, sample */ - bp_commbuf[0] = 0x80 | 0xa; - ret = buspirate_sendrecv(bp_commbuf, 1, 1); - if (ret) - return 1; - if (bp_commbuf[0] != 0x01) { - msg_perr("Protocol error while setting SPI config!\n"); - return 1; - } + msg_pdbg("SPI command set v2 not available, using old commands " + "present in firmware <v5.5.\n"); - /* De-assert CS# */ - bp_commbuf[0] = 0x03; - ret = buspirate_sendrecv(bp_commbuf, 1, 1); - if (ret) - return 1; - if (bp_commbuf[0] != 0x01) { - msg_perr("Protocol error while raising CS#!\n"); - return 1; + /* FIXME: Check the error code? */ + /* We sent 4 bytes of 0x00, so we expect 4 BBIO1 responses. */ + buspirate_sendrecv(bp_commbuf, 0, 4 * 5); + + /* Enter raw SPI mode again. */ + bp_commbuf[0] = 0x01; + /* FIXME: Check the error code? */ + buspirate_sendrecv(bp_commbuf, 1, 4); + + buspirate_interface_version = 1; + /* Sensible default buffer size. */ + if (buspirate_commbuf_grow(16 + 3)) + return ERROR_OOM; + spi_programmer_buspirate.max_data_read = 12; + spi_programmer_buspirate.max_data_write = 12; + + /* Reinit the whole shebang. */ + if (buspirate_spi_set_config(bp_commbuf, spispeed)) + return 1; + } else { + msg_pdbg("Using SPI command set v2.\n"); + buspirate_interface_version = 2; + /* Sensible default buffer size. */ + if (buspirate_commbuf_grow(260 + 5)) + return ERROR_OOM; + spi_programmer_buspirate.max_data_read = 2048; + spi_programmer_buspirate.max_data_write = 256; } register_spi_programmer(&spi_programmer_buspirate); @@ -340,11 +458,8 @@ return 0; } -static int buspirate_spi_send_command(struct flashctx *flash, - unsigned int writecnt, - unsigned int readcnt, - const unsigned char *writearr, - unsigned char *readarr) +static int buspirate_spi_send_command_v1(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) { unsigned int i = 0; int ret = 0; @@ -395,3 +510,54 @@ return ret; } + +static int buspirate_spi_send_command_v2(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + int i = 0, ret = 0; + + if (writecnt > 4096 || readcnt > 4096 || (readcnt + writecnt) > 4096) + return SPI_INVALID_LENGTH; + + /* 5 bytes extra for command, writelen, readlen. + * 1 byte extra for Ack/Nack. + */ + if (buspirate_commbuf_grow(max(writecnt + 5, readcnt + 1))) + return ERROR_OOM; + + /* Combined SPI write/read. */ + bp_commbuf[i++] = 0x04; + bp_commbuf[i++] = (writecnt >> 8) & 0xff; + bp_commbuf[i++] = writecnt & 0xff; + bp_commbuf[i++] = (readcnt >> 8) & 0xff; + bp_commbuf[i++] = readcnt & 0xff; + memcpy(bp_commbuf + i, writearr, writecnt); + + ret = buspirate_sendrecv(bp_commbuf, i + writecnt, 1 + readcnt); + + if (ret) { + msg_perr("Bus Pirate communication error!\n"); + return SPI_GENERIC_ERROR; + } + + if (bp_commbuf[0] != 0x01) { + msg_perr("Protocol error while sending SPI write/read!\n"); + return SPI_GENERIC_ERROR; + } + + /* Skip Ack. */ + memcpy(readarr, bp_commbuf + 1, readcnt); + + return ret; +} + +static int buspirate_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + switch (buspirate_interface_version) { + case 2: + return buspirate_spi_send_command_v2(flash, writecnt, readcnt, writearr, readarr); + default: + return buspirate_spi_send_command_v1(flash, writecnt, readcnt, writearr, readarr); + } +} -- http://www.hailfinger.org/

2 3

Re: [flashrom] Rom chip not supported
by Stefan Tauner 13 Jul '12

13 Jul '12

On Thu, 12 Jul 2012 11:16:57 +1000 eugen barticel <eugenbart66(a)gmail.com> wrote: > flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian your version of flashrom is ancient, please update. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] FAILED: xw9400
by Stefan Tauner 12 Jul '12

12 Jul '12

Hi! Your original mail is too big to post and will be processed by an administrator. If you have made a backup of the previous bios please try to write that back. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

FAILED: xw9400
by Alan Latteri 12 Jul '12

12 Jul '12

I forgot to jumper the bootblock. I did flashrom -w newbios. It spit up a bunch of fails and warnings. See the attached screenshots. What should I do? Should I power off, jumper and try again? Thanks, Alan [Note from the list moderator: Two JPG attachments have been stripped and transcribed manually. Transcription below. # flashrom -w xw9400_BIOS.rom flashrom v0.9.5.2-r1515 on Linux 3.2.19-std280-i586 (i686), built with libpci 3.1.9, GCC 4.4.7, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK Found chipset "NVIDIA MCP55". Enabling flash write... OK. Disabling flash write protection for board "HP xw9400"... OK. Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing glash chip... ERASE FAILED at 0x000f0000! Expected=x0ff, Read=0xe9, failed byte count from 0x000f0000-0x000f0fff: 0xf56 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x000f0000! Expected=x0ff, Read=0xe9, failed byte count from 0x000f0000-0x000fffff: 0xe2e4 ERASE FAILED! FAILED! Uh oh. Erase/Write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!

1 0

Rom chip not supported
by eugen barticel 12 Jul '12

12 Jul '12

hi there, I tried to flash my BIOS using flashrom but it says that my computer chipset is not supported yet. I have attached the output to this email. Hope this will be helpful for you. Thanks Eugen

1 0

Re: [flashrom] IBM SurePOS 700 4800-783 support
by Carl-Daniel Hailfinger 12 Jul '12

12 Jul '12

Am 11.07.2012 00:11 schrieb Jason_Vannest(a)abercrombie.com: > Sorry if this is a flashrom noob question. But I want to make sure that I > understand correctly what your saying. The question is valid. > It sounds like this Renesas H8S2116 controller is something that nobody on > the flashrom dev team has worked on yet? I think a few of us have already worked with Renesas H8 series controllers, so at least in theory this sounds doable. > From reading your very fine and very detailed web site (congrats on that > BTW), specifically the section on adding support for laptops " > http://www.flashrom.org/Laptops" it sounds like a little bit of a > challenge to add support for a new chipset like this? Is that a correct > assumption on my part? Yes and no. It's a bit more complicated. If the Renesas H8S2116 is between the southbridge and the flash chip, adding flashrom support for the SurePOS might be a bit of a challenge. If the Renesas controller is not in that particular data path, there's a good chance we can simply ignore it. The unsupported chipset we were talking about is the VIA VT8251, and it seems we might already have code for it, we're just waiting for the matching VIA datasheet to confirm this. > We've spoken with IBM and of course all of their current stuff is DOS > based / bootable from USB key. Of course for a fee they would be willing > to help us out and develop a Linux based program to update the BIOS..... It might be helpful for us if IBM can answer some questions about the hardware, but that's not a hard requirement. We have some quite sharp scalpels for analyzing hardware and software. > Does anyone have thoughts on how much time and effort it would take to do > this? IBM is hardly ever the cheapest solution, so I'm guessing we would > more likely find a more reasonable price from the Open Source > community.... I'd venture a guess that we can do this before IBM can even give you a quote. That said, all of us have day jobs or study somewhere and we work on flashrom in our spare time. We're in the process of setting up a flashrom nonprofit, so besides the option of paying one of our developers there hopefully will be the option of making a tax-deductible contribution to our nonprofit. We're happy to help you solve this challenge. If you have any further questions, just ask. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] IBM SurePOS 700 4800-783 support
by Carl-Daniel Hailfinger 12 Jul '12

12 Jul '12

Hi Jason, your chipset is definitely not supported yet. One of our developers just asked VIA for a datasheet of your chipset, and if we're lucky, we might have more info soon (few days). In the meantime, it would be very helpful if you could open one of those machines and check which flash chip it uses. As a general rule, flash chips usually come either in a 32-pin PLCC package (almost square, 11.5mm x 14mm, pins on all 4 sides of the chip, model number contains 29,39 or 49) or an 8-pin DIP/SOIC package (rectangular, roughly 9 mm x 6 mm or smaller, model number contains 25 or 45). Most of the time, the flash chip has some sticker on top (peel it off to read the model number etched into the chip). A few photos of flash chips are here: http://www.flashrom.org/Technology#PLCC32:_Plastic_Leaded_Chip_Carrier.2C_3… If you can't find the flash chip, just upload a high-res photo of the mainboard somewhere and mail the link for that photo to our list. We're usually pretty good at spotting those things. Any further development will be against the latest flashrom source code from subversion. http://www.flashrom.org/Downloads has more info on how to get it. By the way, you can log all output (including warnings etc.) to a file with the --output parameter. This comes in handy if you don't want to cut-n-paste flashrom output from a terminal. ./flashrom -V -p internal:laptop=this_is_not_a_laptop --output logfile.txt Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] IBM SurePOS 700 4800-783 support
by Jason_Vannest＠abercrombie.com 11 Jul '12

11 Jul '12

Sorry if this is a flashrom noob question. But I want to make sure that I understand correctly what your saying. It sounds like this Renesas H8S2116 controller is something that nobody on the flashrom dev team has worked on yet? >From reading your very fine and very detailed web site (congrats on that BTW), specifically the section on adding support for laptops " http://www.flashrom.org/Laptops" it sounds like a little bit of a challenge to add support for a new chipset like this? Is that a correct assumption on my part? We've spoken with IBM and of course all of their current stuff is DOS based / bootable from USB key. Of course for a fee they would be willing to help us out and develop a Linux based program to update the BIOS..... Does anyone have thoughts on how much time and effort it would take to do this? IBM is hardly ever the cheapest solution, so I'm guessing we would more likely find a more reasonable price from the Open Source community.... Thanks again for your assistance. Jason Vannest Information Technology - Store Systems Abercrombie & Fitch 614-283-6363 (desk) From: Idwer Vollering <vidwer(a)gmail.com> To: Jason_Vannest(a)abercrombie.com, Cc: flashrom(a)flashrom.org Date: 07/10/2012 04:52 PM Subject: Re: [flashrom] IBM SurePOS 700 4800-783 support 2012/7/10 <Jason_Vannest(a)abercrombie.com> Output from "./flashrom -V -p internal:laptop=this_is_not_a_laptop " flashrom v0.9.5.2-r1515 on Linux 2.6.32.12-0.7-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1774M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1009 us, 10000 myus = 9982 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "IBM CORPORATION" DMI string system-product-name: "4800783" DMI string system-version: "4800783" DMI string baseboard-manufacturer: "IBM CORPORATION" DMI string baseboard-product-name: "P4M900/VT8251/DME1737" DMI string baseboard-version: "<BAD INDEX>" DMI string chassis-type: "" DMI chassis-type is not specific enough. The following protocols are supported: Non-SPI. So the chipset in your POS machine is, at the moment, not recognized by flashrom. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. According to this IBM web page [1] there is a "Service Processor Renesas H8S2116" [2] present. [1] http://www-01.ibm.com/support/docview.wss?uid=pos1R1003969 [2] http://documentation.renesas.com/doc/products/mpumcu/rej09b0255_h8s2116hm.p…

1 0

Re: [flashrom] IBM SurePOS 700 4800-783 support
by Idwer Vollering 10 Jul '12

10 Jul '12

2012/7/10 <Jason_Vannest(a)abercrombie.com> > Output from "./flashrom -V -p internal:laptop=this_is_not_a_laptop " > > flashrom v0.9.5.2-r1515 on Linux 2.6.32.12-0.7-default (i686), built with > libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little > endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 1774M loops per > second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1009 us, 10000 myus > = 9982 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "IBM CORPORATION" > DMI string system-product-name: "4800783" > DMI string system-version: "4800783" > DMI string baseboard-manufacturer: "IBM CORPORATION" > DMI string baseboard-product-name: "P4M900/VT8251/DME1737" > DMI string baseboard-version: "<BAD INDEX>" > DMI string chassis-type: "" > DMI chassis-type is not specific enough. > The following protocols are supported: Non-SPI. So the chipset in your POS machine is, at the moment, not recognized by flashrom. > > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. > According to this IBM web page [1] there is a "Service Processor Renesas H8S2116" [2] present. [1] http://www-01.ibm.com/support/docview.wss?uid=pos1R1003969 [2] http://documentation.renesas.com/doc/products/mpumcu/rej09b0255_h8s2116hm.p…

1 0

Re: [flashrom] IBM SurePOS 700 4800-783 support
by Joshua Roys 10 Jul '12

10 Jul '12

On 07/09/2012 12:29 PM, Jason_Vannest(a)abercrombie.com wrote: > ======================= > flashrom -V > ======================= > flashrom v0.9.5.2-r1515 on Linux 2.6.32.12-0.7-default (i686), built > with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], > little endian > flashrom is free software, get the source code at > http://www.flashrom.org <http://www.flashrom.org/> > > Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops > per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 995 us, > 10000 myus = 9976 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "IBM CORPORATION" > DMI string system-product-name: "4800783" > DMI string system-version: "4800783" > DMI string baseboard-manufacturer: "IBM CORPORATION" > DMI string baseboard-product-name: "P4M900/VT8251/DME1737" > DMI string baseboard-version: "<BAD INDEX>" > DMI string chassis-type: "" > DMI chassis-type is not specific enough. Hello Jason, Can you please add the following to the `flashrom -V` command and re-run it? -p internal:laptop=this_is_not_a_laptop Thanks, Josh

2 1

Flashrom on stock X60(s)
by Tomasz Ostaszewski 10 Jul '12

10 Jul '12

Hi all. I want to flash on of my X60s with a coreboot using flashrom. I did search the flashrom list archive, and I found the "FAILED: MX25L1605 on Thinkpad X60s" (http://bit.ly/NetLop) and related "Lenovo T60 Type 8743-GZU - RAM Support? 3Gb or 4Gb" (http://bit.ly/Mfhi1W) threads. Despite what the heading says, those threads do treat about a successful flashing of a stock X60s with flahshrom utility. There is is almost a complete descripton of what to do, and what to use. However, for me there's one piece of the puzzle missing - the patch. Peter writes: "[..]You need the flashrom source, a small patch, and my bucts utility from http://git.stuge.se/?p=bucts.git" The flashrom is readily available from SVN, the bucts from git, but what are the patches and where to get them from? And, if worst comes to the worst and I brick my X60s, would I be able to resurrect it using a programmer and a SOIC-8 clip (http://bit.ly/Nj8Sdx)? Or rather (de)soldering would be necessary? Best regards, t.

1 0

IBM SurePOS 700 4800-783 support
by Jason_Vannest＠abercrombie.com 09 Jul '12

09 Jul '12

After a brief email exchange with Stefan he suggested I post my request to this mailing list. So here I am... We tested flashrom on a number of our POS systems last year, (it was not the most current release if flashrom at the time, whatever SUSE have bundled in their RPMs) and it didn't seem to support any of the BIOS flash chips in our POS systems. However, after emailing Stefan I went back and complied and loaded up v0.9.5.2-r1515 and it looks like you guys have been very busy! There seems to only be one system that we use that is not auto detecting the flash chip. It is the 4800-783 mentioned in the subject of my email. We have a large number of IBM 4800-783 SurePOS 700 systems spread across several countries and it would be nice to have a way to remotely update the BIOS on them. I've attached the output from 'flashrom -V', 'lspci -nnvvvxxx', and 'superiotool -deV'. Stefan said this would be a good starting point for anyone that might be interested in taking a look. Please let me know if you think this could be easily added to flashrom. Thanks. Jason Vannest Information Technology - Store Systems Abercrombie & Fitch ======================= flashrom -V ======================= flashrom v0.9.5.2-r1515 on Linux 2.6.32.12-0.7-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 995 us, 10000 myus = 9976 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "IBM CORPORATION" DMI string system-product-name: "4800783" DMI string system-version: "4800783" DMI string baseboard-manufacturer: "IBM CORPORATION" DMI string baseboard-product-name: "P4M900/VT8251/DME1737" DMI string baseboard-version: "<BAD INDEX>" DMI string chassis-type: "" DMI chassis-type is not specific enough. ======================= superiotool -deV ======================= superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0x0000, rev=0x00 Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x164e... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O at 0x164e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x2e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x4e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Found SMSC DME1737 (id=0x78, rev=0x01) at 0x4e Register dump: idx 03 20 21 22 23 24 26 27 28 2a 2b 2c 2d 2e 2f val 00 78 01 31 00 44 4e 00 00 00 00 00 00 00 00 def RR 77 NA 00 RR 44 MM MM RR NA NA NA NA NA NA LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 00 03 f0 06 02 0e 00 ff 00 00 LDN 0x03 (Parallel port) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 04 38 00 def 00 00 00 00 04 3c 00 LDN 0x04 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 00 00 00 00 00 LDN 0x05 (COM2) idx 30 60 61 70 f0 f1 f2 val 01 02 f8 03 00 02 03 def 00 00 00 00 00 02 03 LDN 0x07 (Keyboard) idx 30 70 72 f0 val 01 01 00 00 def 00 00 00 00 LDN 0x0a (Runtime registers) idx 30 60 61 62 63 f0 f1 f2 val 01 08 00 00 00 00 00 04 def 00 00 00 00 00 NA RR 04 No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. Probing for Server Engines Super I/O at 0x2e... Failed. Returned data: id=0xffff, rev=0xff ======================= lspci -nnvvvxxx ======================= 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:0364] Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:0364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 8 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.5 Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via Kernel modules: via-agp 00: 06 11 64 03 06 00 10 a2 00 00 00 06 00 08 80 00 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 64 03 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 40 33 04 00 00 00 00 00 00 00 1f c4 00 24 00 01 50: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 02 50 35 00 0b 02 00 07 02 03 00 00 00 00 00 00 90: 80 01 00 00 20 0f 01 00 00 00 42 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 03 00 00 00 00 00 00 25 02 00 80 c0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:1364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 64 13 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:2364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 64 23 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 88 b8 ef 88 7c 20 00 a1 00 20 00 00 00 b2 88 06 60: 45 01 00 00 00 00 24 00 01 02 00 00 00 00 00 00 70: 55 33 55 33 35 20 74 00 10 aa 14 00 00 91 00 00 80: 24 10 10 10 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:3364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 64 33 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 10 00 20 00 00 00 00 00 00 00 10 00 00 00 00 00 50: aa 00 11 9f 80 a0 00 00 00 00 00 00 00 00 00 00 60: 00 63 ab 69 66 d9 88 00 00 ef a8 10 c8 c0 88 43 70: 00 00 00 00 05 05 c0 87 8f 80 00 3c 00 00 00 00 80: aa 00 aa a0 00 80 3d 00 80 00 00 00 00 00 00 00 90: 05 07 05 05 00 00 00 00 f8 00 00 00 02 00 91 00 a0: 00 e0 44 00 0d 00 00 00 00 00 00 00 00 00 00 00 b0: 82 aa 02 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 88 99 99 01 8a a0 a8 00 00 00 00 00 00 00 00 00 e0: ee 00 bb 00 66 00 ff 00 86 00 00 00 44 00 00 10 f0: 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:4364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 64 43 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 80 a0 7f ff ff f0 fb 00 00 00 00 00 00 00 04 00 b0: 00 00 80 00 80 00 00 00 f1 00 04 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00:00.5 PIC [0800]: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC Interrupt Controller [1106:5364] (prog-if 20 [IO(X)-APIC]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 64 53 06 00 00 00 00 20 00 08 10 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: cc 00 05 00 02 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 2b 0e 00 00 13 00 00 00 01 00 0f 00 02 00 0f 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: f7 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.6 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device [1106:6364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 64 63 06 00 00 00 00 00 00 06 10 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 60 00 0a 00 00 00 00 00 00 02 20 10 50: 05 00 00 00 00 00 0e 00 10 00 10 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 12 00 00 00 00 00 70: 2a 00 2a 00 00 00 00 00 10 00 10 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge [1106:7364] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 06 11 64 73 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 70 19 88 88 82 44 10 10 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0a 01 00 24 68 86 86 64 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: dd000000-deffffff Prefetchable memory behind bridge: c0000000-cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: shpchp 00: 06 11 98 b1 07 00 30 02 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 20 02 20: 00 dd f0 de 00 c0 f0 cf 00 00 00 00 00 00 00 00 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 0c 00 40: 93 c3 e2 44 30 72 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00 90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 80 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00 c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 PCI bridge [0604]: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller [1106:a364] (rev 80) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: dfc00000-dfcfffff Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 0, PowerLimit 150.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000001 Pending: 00000000 Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+ Capabilities: [98] Subsystem: VIA Technologies, Inc. Device [1106:c323] Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 06 11 64 a3 07 00 10 00 80 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 90 90 00 00 20: c0 df c0 df b1 df b1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 04 00 40: 10 68 41 01 01 80 00 00 30 08 10 00 01 3d 18 00 50: 00 00 01 10 60 4b 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 88 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 00 00 00 00 00 00 08 98 02 a8 00 00 00 00 90: 00 00 00 00 00 00 00 00 0d 00 00 00 06 11 23 c3 a0: 10 14 30 fc 7e ff 7f ac 00 00 00 00 00 00 00 00 b0: 12 1b 41 81 00 00 21 00 00 00 00 00 00 00 00 00 c0: 03 00 25 00 44 44 44 44 44 44 44 44 00 00 00 00 d0: 50 20 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 0c 08 24 95 08 00 00 00 04 a5 48 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00:03.0 PCI bridge [0604]: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller [1106:c364] (rev 80) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: 00000000dfd00000-00000000dfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 0, PowerLimit 150.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+ Capabilities: [98] Subsystem: VIA Technologies, Inc. Device [1106:c323] Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 06 11 64 c3 07 00 10 00 80 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 b0 b0 00 00 20: e0 df e0 df d1 df d1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 04 00 40: 10 68 41 01 01 80 00 00 10 08 10 00 11 3c 18 01 50: 40 00 11 30 60 4b 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 88 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 08 98 02 a8 00 00 00 00 90: 00 00 00 00 00 00 00 00 0d 00 00 00 06 11 23 c3 a0: 10 14 70 7c 5c ff 7f ac 00 00 00 00 00 00 00 00 b0: 3b 58 40 81 00 00 01 00 00 00 00 00 00 00 00 00 c0: 03 00 27 8a 44 44 00 00 00 00 00 00 00 00 00 00 d0: 50 20 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 01 04 95 48 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT8251 Serial ATA Controller [1106:5287] (rev 20) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: VIA Technologies, Inc. Device [1106:3349] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at fc00 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f400 [size=8] Region 3: I/O ports at f000 [size=4] Region 4: I/O ports at ec00 [size=16] Region 5: Memory at dffff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_via Kernel modules: sata_via 00: 06 11 87 52 07 00 90 02 20 8f 01 01 00 20 80 00 10: 01 fc 00 00 01 f8 00 00 01 f4 00 00 01 f0 00 00 20: 01 ec 00 00 00 f0 ff df 00 00 00 00 06 11 49 33 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00 40: 73 13 f1 44 07 af 48 00 00 a0 14 00 00 00 00 00 50: 00 00 00 00 00 00 01 00 00 10 00 00 20 f0 08 01 60: 00 00 00 00 0c ff ff 00 00 00 0b 02 44 44 81 04 70: 00 00 00 00 ff ff 00 00 01 00 01 00 00 00 00 00 80: 00 00 00 34 00 18 0c 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 00 00 00 0c 0c 0c 0c 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 02 00 00 00 02 00 00 00 02 00 c0: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00 d0: 20 02 87 52 06 11 49 33 4f 00 00 00 01 01 01 c1 e0: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e800 [size=8] Region 1: I/O ports at e400 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via Kernel modules: via82cxxx, pata_via 00: 06 11 71 05 05 00 90 02 07 8f 01 01 00 20 00 00 10: 01 e8 00 00 01 e4 00 00 01 e0 00 00 01 dc 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 71 05 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 01 00 00 40: 0b f2 f9 05 18 8c c0 00 99 99 99 99 ff 00 a8 a8 50: 07 07 07 07 0c 03 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 82 01 25 00 00 00 00 00 82 01 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 07 01 71 05 06 11 71 05 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 06 11 38 30 07 00 10 02 91 00 03 0c 10 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 02 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 06 11 38 30 07 00 10 02 91 00 03 0c 10 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 02 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at cc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 06 11 38 30 07 00 10 02 91 00 03 0c 10 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 cc 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 02 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 91) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 06 11 38 30 07 00 10 02 91 00 03 0c 10 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 c8 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 04 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 02 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [88] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 06 11 04 31 17 00 10 02 90 20 03 0c 10 20 80 00 10: 00 e0 ff df 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 00 00 40: 02 00 03 00 00 00 00 00 be 00 00 09 02 03 00 00 50: 00 60 04 80 00 00 00 00 04 0b 44 44 8f 46 62 00 60: 20 20 01 00 00 00 00 00 01 00 00 01 00 00 08 c0 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 88 c2 ff 00 00 00 00 0a 00 a0 20 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 92 00 00 00 00 00 00 00 00 00 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287] Subsystem: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: i2c-viapro 00: 06 11 87 32 03 00 10 82 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 87 32 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 44 00 f0 0b 00 00 10 00 0c 20 00 00 44 01 0a 00 50: c0 28 09 00 00 00 00 00 62 90 00 03 80 08 00 00 60: 00 00 00 00 03 00 01 05 00 00 00 00 00 00 00 00 70: 06 11 87 32 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 84 49 00 1a 60 00 00 01 04 00 00 05 18 00 00 90: 70 ff 10 88 a0 c1 00 02 0e 06 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 05 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 20 28 ef 82 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 11 30 00 00 00 00 00 00 00 00 00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e] Subsystem: VIA Technologies, Inc. VT8251 Ultra VLINK Controller [1106:287e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 32 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00: 06 11 7e 28 06 00 10 a2 00 00 00 06 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 7e 28 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00 40: f7 24 00 80 82 00 00 00 23 3b 88 80 82 44 80 43 50: 80 8c 00 02 00 04 01 80 08 00 01 80 00 00 00 00 60: 00 aa 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 70: 82 c8 ee 01 dc 0f 50 48 01 00 00 00 82 00 12 12 80: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: fd 3f df 00 00 00 00 e0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 60 a8 88 88 88 33 03 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 80 3d 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8251 Host Bridge [1106:287b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- 00: 06 11 7b 28 00 00 00 20 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 1c 0e 00 06 00 00 0f 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 70 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 70: 0d 00 00 00 06 11 7a 28 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCI to PCI Bridge [1106:287a] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00007000-00008fff Memory behind bridge: dfa00000-dfafffff Prefetchable memory behind bridge: 00000000df900000-00000000df9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 06 11 7a 28 07 00 00 20 00 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 70 80 00 02 20: a0 df a0 df 91 df 91 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 04 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 70 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 70: 0d 00 00 00 06 11 7a 28 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] [1106:3371] (rev 01) (prog-if 00 [VGA controller]) Subsystem: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] [1106:3371] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min) Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at de000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 00: 06 11 71 33 07 00 30 02 01 00 00 03 00 20 00 00 10: 08 00 00 c0 00 00 00 dd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 71 33 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 02 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 70 22 06 00 00 00 00 00 00 00 00 00 00 00 00 70: 02 00 30 00 0b 1e 00 ff 02 03 00 07 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express [14e4:167b] (rev 02) Subsystem: IBM Device [1014:0383] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at dfef0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: ffffdf77fffffffc Data: dfcc Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 47-53-3f-fe-ff-64-1a-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 7b 16 06 00 10 00 02 00 00 02 10 00 00 00 10: 04 00 ef df 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 83 03 30: 00 00 ff ff 48 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 01 50 03 c0 08 20 00 64 50: 03 58 f4 00 ff ff ff df 09 e8 78 00 51 3c fa 2f 60: 00 00 00 00 00 00 00 00 98 02 02 a0 00 00 18 76 70: f2 10 00 00 c0 00 00 00 04 58 00 00 00 00 00 00 80: 00 00 00 02 00 00 00 00 34 00 13 04 82 70 08 fc 90: 19 ba 00 01 01 00 00 00 00 00 00 00 4a 01 00 00 a0: 00 00 00 00 82 00 00 00 00 00 00 00 cc 00 00 00 b0: 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0e 00 00 00 00 00 00 00 d0: 10 00 01 00 a0 8f 58 02 00 50 10 00 11 64 03 00 e0: 40 01 11 10 00 00 00 00 05 d0 80 00 fc ff ff ff f0: 77 df ff ff cc df 00 00 00 00 00 00 00 00 00 00 04:0b.0 System peripheral [0880]: IBM Device [1014:0295] (rev 10) Subsystem: IBM Device [1014:0296] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 8c00 [size=16] Region 1: Memory at dfaff000 (32-bit, non-prefetchable) [size=1K] Region 2: Memory at dfa80000 (32-bit, non-prefetchable) [size=256K] Region 3: Memory at dfac0000 (32-bit, non-prefetchable) [size=128K] Region 4: Memory at dfafe000 (32-bit, non-prefetchable) [size=2K] [virtual] Expansion ROM at df900000 [disabled] [size=16K] 00: 14 10 95 02 03 00 00 02 10 00 80 08 00 00 80 00 10: 01 8c 00 00 00 f0 af df 00 00 a8 df 00 00 ac df 20: 00 e0 af df 00 00 00 00 00 00 00 00 14 10 96 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04:0b.1 Serial controller [0700]: IBM Device [1014:0297] (rev 10) (prog-if 02 [16550]) Subsystem: IBM Device [1014:0298] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at 8800 [size=8] Region 1: I/O ports at 8400 [size=8] Region 2: I/O ports at 8000 [size=8] Region 3: I/O ports at 7c00 [size=8] Region 4: I/O ports at 7800 [size=8] Region 5: I/O ports at 7400 [size=8] Kernel driver in use: serial 00: 14 10 97 02 01 00 00 02 10 02 00 07 00 00 80 00 10: 01 88 00 00 01 84 00 00 01 80 00 00 01 7c 00 00 20: 01 78 00 00 01 74 00 00 00 00 00 00 14 10 98 02 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:00.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=80, secondary=81, subordinate=81, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: bfb00000-bfbfffff Prefetchable memory behind bridge: bfe00000-bfefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 6, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+ Capabilities: [90] Subsystem: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287c] Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSVoil- UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn+ ChkCap- ChkEn+ Capabilities: [140] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 06 11 7c 28 07 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 80 81 81 00 60 60 00 00 20: b0 bf b0 bf e0 bf e0 bf 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00 40: 10 68 41 01 01 0e 00 00 20 04 10 00 11 1c 00 01 50: 00 00 01 00 e0 0c 30 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 02 c8 00 00 00 00 70: 05 88 80 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 08 90 02 a8 00 00 00 00 90: 0d 00 00 00 06 11 7c 28 00 00 00 00 00 00 00 00 a0: 01 14 00 00 1c 00 00 00 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 03 40 01 00 44 44 00 00 00 00 00 00 00 00 00 00 d0: 50 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 0c 0d 94 48 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 80:00.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=80, secondary=82, subordinate=82, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: bfd00000-bfdfffff Prefetchable memory behind bridge: bfc00000-bfcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 256 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 7, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+ Capabilities: [90] Subsystem: VIA Technologies, Inc. VT8251 PCIE Root Port [1106:287d] Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSVoil- UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn+ ChkCap- ChkEn+ Capabilities: [140] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: 06 11 7d 28 07 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 80 82 82 00 50 50 00 00 20: d0 bf d0 bf c0 bf c0 bf 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 04 00 40: 10 68 41 01 01 0e 00 00 20 00 10 00 11 1c 00 02 50: 00 00 01 00 e0 0c 38 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 02 c8 00 00 00 00 70: 05 88 80 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 08 90 02 a8 00 00 00 00 90: 0d 00 00 00 06 11 7d 28 00 00 00 00 00 00 00 00 a0: 01 14 00 00 1c 00 00 00 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 0c 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0262] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at bfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable- Address: 00000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend+ LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 06 11 88 32 06 00 10 00 00 00 03 04 10 00 00 00 10: 00 c0 ff bf 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 62 02 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1 0

Re: [flashrom] [PATCH] Make make make and clean all utility tools too
by Carl-Daniel Hailfinger 07 Jul '12

07 Jul '12

Am 07.07.2012 10:25 schrieb Stefan Tauner: > Happy day of redundancy day! > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Sir, hats off to you, sir! Your brilliantly stated brilliant comment wins you one shippable internet, ready to be shipped over the net. Regards, Carl-Daniel

1 0

[PATCH] Make make make and clean all utility tools too
by Stefan Tauner 07 Jul '12

07 Jul '12

Happy day of redundancy day! Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Makefile b/Makefile index 530fb83..d713254 100644 --- a/Makefile +++ b/Makefile @@ -270,6 +270,7 @@ CLI_OBJS = flashrom.o cli_classic.o cli_output.o print.o PROGRAMMER_OBJS = udelay.o programmer.o all: pciutils features $(PROGRAM)$(EXEC_SUFFIX) + +make -C util/ich_descriptors_tool/ # Set the flashrom version string from the highest revision number # of the checked out flashrom files. @@ -569,6 +570,7 @@ TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root -- # We don't use EXEC_SUFFIX here because we want to clean everything. clean: rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d + +make -C util/ich_descriptors_tool/ clean distclean: clean rm -f .features .libdeps -- Kind regards, Stefan Tauner

1 0

Board ASUS M2V-MX_SE: No EEPROM/flash device found when running flashrom in Windows XP
by Fengwei Zhang 03 Jul '12

03 Jul '12

All, I am trying to flash Coreboot BIOS in Windows XP SP3 environment. but I got No EEPROM/flash device found when running flashrom.exe. I have been successfully flashed BIOS in CentOS environment on the same machine by running ./flashrom -w coreboot.rom. Does anyone know why I get this error message? Regards, Fengwei

3 2

[PATCH] README: mention all the drivers that should be disabled on non-x86
by Paul Fertser 02 Jul '12

02 Jul '12

Currently README mentions some but not all options needed to get flashrom compiled on a libpci-less system. This patch adds all of them. Signed-off-by: Paul Fertser <fercerpav(a)gmail.com> --- README | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/README b/README index f88b3b5..88cc782 100644 --- a/README +++ b/README @@ -120,8 +120,9 @@ Processor architecture dependent features: On non-x86 architectures you have to disable a few programmers because they use port-based I/O which is not directly available on non-x86. Please add - CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_ATAHPT=no CONFIG_NICREALTEK=no \ - CONFIG_NICNATSEMI=no + CONFIG_RAYER_SPI=no CONFIG_NIC3COM=no CONFIG_GFXNVIDIA=no CONFIG_SATASII=no \ + CONFIG_ATAHPT=no CONFIG_DRKAISER=no CONFIG_NICREALTEK=no CONFIG_NICNATSEMI=no \ + CONFIG_NICINTEL=no CONFIG_NICINTEL_SPI=no CONFIG_OGP_SPI=no CONFIG_SATAMV=no as parameters to the "make" invocation. Besides that, the internal programmer is only supported on x86 and MIPS. On other architectures, please add -- 1.7.10

2 1

Re: [flashrom] help with static or standalone binary compile instructions
by Marcos Felipe Rasia de Mello 01 Jul '12

01 Jul '12

2012/7/1 Steven Williams <prodigiouslogic(a)gmail.com>: > Marcos, thanks for the quick response! I searched all over for that line > before, don't know how I missed it before :( In the svn make file as of > 7-28-2012 it is located at line 553. It compiled without error and it almost > executed. It was compiled with a 2.6 kernel but the machine I am trying to > run it on has a 2.4 kernel and it segfaulted. I am probably making a mistake > again or have overlooked a possible simple solution. I searched all over > google for a quick fix but found none. Any pointers on that? As a last > resort I think I am going to setup a debian 3.0 box to see if it will > compile and run. > Your libc requires a 2.6 kernel to run ("file flashrom" to see what version). With some pain you can build a separate toolchain targeting Linux 2.4, but probably the easiest option is set up an old distribution and compile flashrom there. Please use "reply to all" in your email client, otherwise your messages will not go to the mailing list. Regards, Marcos

1 0

Re: [flashrom] help with static or standalone binary compile instructions
by Marcos Felipe Rasia de Mello 01 Jul '12

01 Jul '12

2012/6/30 Steven Williams <prodigiouslogic(a)gmail.com>: > I had a quick and probably dumb question, where in 'make' can I change the > parameters so flashrom will compile as a static or stand alone binary? I > found an old email where Gianluigi Tiesi > says(http://www.mail-archive.com/flashrom@flashrom.org/msg05104.html) to add > -static to the end of the cc list in his example but I cannot find anything > that resembles it in the current make file. I looked at the instructions for > the DOS compile but I was not sure if I needed to use this method and if I > could even add all the lib headers required to run flashrom. I am trying to > run flashrom on a thin client so I can install an updated version of Linux. > Right now they only run a custom Linux build that uses a 2.4 kernel and I > would like to have the system open to run an updated kernel and software. I > do believe a bootstrap or lilo configuration is in place but I will not know > for sure to modify it until I have the ability to read and write to the > bios. It would be great if this program was more standalone centric since a > full blown os is not always available. > > > So some pointers or advice would be awesome, thanks in advance! I'm using this and it works fine. --- Makefile.orig 2012-01-13 09:19:59.388190891 -0200 +++ Makefile 2012-01-13 09:21:49.489193337 -0200 @@ -531 +531 @@ - $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(FEATURE_LIBS) $(LIBS) + $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(FEATURE_LIBS) $(LIBS) -lz -static You'll need static libraries to link against. On Fedora they are in the following packages: glibc-static, zlib-static, pciutils-devel-static. Regards, Marcos

1 0

help with static or standalone binary compile instructions
by Steven Williams 30 Jun '12

30 Jun '12

I had a quick and probably dumb question, where in 'make' can I change the parameters so flashrom will compile as a static or stand alone binary? I found an old email where Gianluigi Tiesi says( http://www.mail-archive.com/flashrom@flashrom.org/msg05104.html) to add -static to the end of the cc list in his example but I cannot find anything that resembles it in the current make file. I looked at the instructions for the DOS compile but I was not sure if I needed to use this method and if I could even add all the lib headers required to run flashrom. I am trying to run flashrom on a thin client so I can install an updated version of Linux. Right now they only run a custom Linux build that uses a 2.4 kernel and I would like to have the system open to run an updated kernel and software. I do believe a bootstrap or lilo configuration is in place but I will not know for sure to modify it until I have the ability to read and write to the bios. It would be great if this program was more standalone centric since a full blown os is not always available. So some pointers or advice would be awesome, thanks in advance! Steven Williams

1 0

Re: [flashrom] Would flashrom work on an old PowerPC Series 1 TiVo ?
by Carl-Daniel Hailfinger 30 Jun '12

30 Jun '12

Am 27.06.2012 09:34 schrieb Peter Lemenkov: > Hello. > > 2012/6/27 Dave Healey <dave.healey(a)tivoland.com>: > >> My question is, do you thing flashrom would do the job and if so, how would I go about getting a binary that would run on the IBM Power PC that is the core of the old S1 Tivo hardware? > Don't know anything about TiVo but I tried flashrom on Powerbook G4 > and it does read firmware. Didn't try writing so far though. Vladimir Serbinenko (phcoder) gave me his Power Mac, and I hope to test flashrom on it soon. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

Re: [flashrom] MSI K9N SLI (MS-7250 VER:2.1); Your flash chip is in an unknown state
by Carl-Daniel Hailfinger 30 Jun '12

30 Jun '12

Am 26.06.2012 00:56 schrieb Joshua Roys: > Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> If Stefan thinks this patch should be a separate commit, I'll handle it, otherwise it will be part of the tested_stuff commit. Regards, Carl-Daniel > On Mon, Jun 25, 2012 at 6:46 PM, Carl-Daniel Hailfinger wrote: >> Am 25.06.2012 16:15 schrieb Joshua Roys: >>> apply the following patch, recompile and try again. Please use the -V >>> flag when writing and send the (hopefully successful) output to the list. >> >> The patch worked, if you add a signoff, you get an ack from me and we >> can commit. -- http://www.hailfinger.org/

1 1

[commit] r1547 - trunk
by repository service 30 Jun '12

30 Jun '12

Author: hailfinger Date: Sat Jun 30 01:07:14 2012 New Revision: 1547 URL: http://flashrom.org/trac/flashrom/changeset/1547 Log: Add board enable for MSI K9N SLI (MS-7250 VER:2.1) Handle PCI Device ID 0x0360 for MCP55 ISA bridge GPIO as well. Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested-by: Stefan A. Scholtz Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Jun 19 14:06:53 2012 (r1546) +++ trunk/board_enable.c Sat Jun 30 01:07:14 2012 (r1547) @@ -1041,6 +1041,7 @@ break; case 0x0260: /* MCP51 */ case 0x0261: /* MCP51 */ + case 0x0360: /* MCP55 */ case 0x0364: /* MCP55 */ /* find SMBus controller on *this* southbridge */ /* The infamous Tyan S2915-E has two south bridges; they are @@ -1115,6 +1116,7 @@ * - Foxconn 6150K8MD-8EKRSH: Socket 939 + NVIDIA MCP51 * - MSI K8N Neo4: NVIDIA CK804. TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. * - MSI K8NGM2-L: NVIDIA MCP51 + * - MSI K9N SLI: NVIDIA MCP55 */ static int nvidia_mcp_gpio2_raise(void) { @@ -2407,6 +2409,7 @@ {0x1106, 0x3149, 0x1462, 0x7061, 0x1106, 0x3227, 0, 0, NULL, NULL, NULL, P3, "MSI", "MS-7061 (KM4M-V/KM4AM-V)", 0, OK, w836xx_memw_enable_2e}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", P3, "MSI", "MS-7135 (K8N Neo3)", 0, OK, w83627thf_gpio44_raise_4e}, {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, P3, "MSI", "MS-7207 (K8NGM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, + {0x10DE, 0x0360, 0x1462, 0x7250, 0x10DE, 0x0368, 0x1462, 0x7250, NULL, NULL, NULL, P3, "MSI", "MS-7250 (K9N SLI)", 0, OK, nvidia_mcp_gpio2_raise}, {0x1011, 0x0019, 0xaa55, 0xaa55, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Nokia", "IP530", 0, OK, fdc37b787_gpio50_raise_3f0}, {0x8086, 0x24d3, 0x144d, 0xb025, 0x8086, 0x1050, 0x144d, 0xb025, NULL, NULL, NULL, P3, "Samsung", "Polaris 32", 0, OK, intel_ich_gpio21_raise}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, NULL, "shuttle", "ak31", P3, "Shuttle", "AK31", 0, OK, w836xx_memw_enable_2e},

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom