- flashrom - mail.coreboot.org

Report: Dell 01HXXJ A05 read
by dpcimanager＠users.sourceforge.net 08 Feb '13

08 Feb '13

flashrom v0.9.6.1-r1646 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.10, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): /Volumes/Files/kurtn/Downloads/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/g8/4hgssf795732rg73l8sdz0d40000gn/T/DPCIzCK01v.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 355M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1028 us, 10000 myus = 10081 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "Dell Inc." DMI string system-product-name: "Inspiron N5050" DMI string system-version: "Not Specified" DMI string baseboard-manufacturer: "Dell Inc." DMI string baseboard-product-name: "01HXXJ" DMI string baseboard-version: "A05" DMI string chassis-type: "Portable" Laptop detected via DMI. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: fc. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: Intel HM67 #2 read
by dpcimanager＠users.sourceforge.net 08 Feb '13

08 Feb '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Downloads/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/Kexts/bios.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 329M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1016 us, 10000 myus = 10062 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. sh: dmidecode: command not found dmidecode execution unsuccessful - continuing without DMI info W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8518,Rev 0x02 on port 0x4e. Found chipset "Intel HM67" with PCI ID 8086:1c4b. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x0 0xffe00000/0xffa00000 FWH IDSEL: 0x0 0xffd80000/0xff980000 FWH IDSEL: 0x0 0xffd00000/0xff900000 FWH IDSEL: 0x0 0xffc80000/0xff880000 FWH IDSEL: 0x0 0xffc00000/0xff800000 FWH IDSEL: 0xf 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x380000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc20: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x00, read w/o addr, none op[1]: 0x00, read w/o addr, none op[2]: 0x00, read w/o addr, none op[3]: 0x00, read w/o addr, none op[4]: 0x00, read w/o addr, none op[5]: 0x00, read w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x00, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0000 (PREOP) 0x96: 0x0000 (OPTYPE) 0x98: 0x00000000 (OPMENU) 0x9C: 0x00000000 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300023 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0180 FLREG2 0x017f0001 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x003fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching enabled, caching enabled, OK. Super I/O ID 0x8518 is not on the list of flash capable controllers. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 4096 kB. There is only one partition containing the whole address space (0x000000 - 0x3fffff). There are 1024 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (4096 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0x75, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xcc, id2 0x06, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xcc, id2 0x06, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (4096 kB, Programmer-specific). Reading flash... Reading 4194304 bytes starting at 0x000000. Transaction error between offset 0x00001000 and 0x0000103f (= 0x00001000 + 63)! Read operation failed! HSFS: FDONE=1, FCERR=1, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 FAILED. Restoring MMIO space at 0x1078358a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: Intel HM67 read
by dpcimanager＠users.sourceforge.net 08 Feb '13

08 Feb '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Downloads/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/Kexts/bios.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 329M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1016 us, 10000 myus = 10062 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. sh: dmidecode: command not found dmidecode execution unsuccessful - continuing without DMI info W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8518,Rev 0x02 on port 0x4e. Found chipset "Intel HM67" with PCI ID 8086:1c4b. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x0 0xffe00000/0xffa00000 FWH IDSEL: 0x0 0xffd80000/0xff980000 FWH IDSEL: 0x0 0xffd00000/0xff900000 FWH IDSEL: 0x0 0xffc80000/0xff880000 FWH IDSEL: 0x0 0xffc00000/0xff800000 FWH IDSEL: 0xf 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x380000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc20: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x00, read w/o addr, none op[1]: 0x00, read w/o addr, none op[2]: 0x00, read w/o addr, none op[3]: 0x00, read w/o addr, none op[4]: 0x00, read w/o addr, none op[5]: 0x00, read w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x00, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0000 (PREOP) 0x96: 0x0000 (OPTYPE) 0x98: 0x00000000 (OPMENU) 0x9C: 0x00000000 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300023 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0180 FLREG2 0x017f0001 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x003fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching enabled, caching enabled, OK. Super I/O ID 0x8518 is not on the list of flash capable controllers. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 4096 kB. There is only one partition containing the whole address space (0x000000 - 0x3fffff). There are 1024 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (4096 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0x75, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xcc, id2 0x06, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xcc, id2 0x06, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xfc, id2 0x51, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xc7, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (4096 kB, Programmer-specific). Reading flash... Reading 4194304 bytes starting at 0x000000. Transaction error between offset 0x00001000 and 0x0000103f (= 0x00001000 + 63)! Read operation failed! HSFS: FDONE=1, FCERR=1, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 FAILED. Restoring MMIO space at 0x1078358a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Re: [flashrom] flashrom ignoring ROM layout region
by Stefan Tauner 08 Feb '13

08 Feb '13

On Tue, 5 Feb 2013 14:06:21 -0800 John Gainsborough <jgindc1(a)gmail.com> wrote: > With BusPirate (v3a, firmware 5.10) and flashrom (v0.9.5.2, little endian) > I am attempting to read a region of the flash ROM defined by a ROM layout > file as in: > > flashrom -p buspirate_spi:dev=/dev/ > ttyUSB0,spispeed=200k -l romlayout -i region1 -r read file > > Where file romlayout contains: > > 003f0000:003fffff region1 > > The flash ROM IC is correctly identified, and region1 is listed as being > used, however flashrom then proceeds to read all ROM memory, not just the > area defined by region1. > > I have run this procedure with flash ROMs: > Eon EN25Q32 and EN25Q64. also Micronix MX25L6445 > > Eventually I plan to use this procedure for writing to a defined region. > > Any help/suggestions gratefully received. Hello John, sorry for the confusion. What you see is perfectly ok and expected (at least to us, understandably not so much to the everyday user). The reason is this: the layout and image options are only taken into account for write operations(!) at the moment. I have created patches to use them for all other operations too but they were not merged yet (we really suck at merging stuff, sorry). If you can not or do not want to extract the required data from the complete image you can take a look at those patches: http://patchwork.coreboot.org/user/bundle/37/ They certainly won't apply to the current HEAD, but you can either use the old source or I can rebase them to the current one if you prefer it. Writing only a part should work though. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

ASUS M4N68T-M LE: flashrom -V
by Valery Kasaev 07 Feb '13

07 Feb '13

flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 430M loops per second, delay more than 10% too short (got 30% of expected delay), recalculating... 441M loops per second, delay more than 10% too short (got 31% of expected delay), recalculating... 451M loops per second, delay more than 10% too short (got 31% of expected delay), recalculating... 432M loops per second, delay more than 10% too short (got 30% of expected delay), recalculating... 453M loops per second, 10 myus = 4 us, 100 myus = 31 us, 1000 myus = 311 us, 10000 myus = 5559 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M4N68T-M LE" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8721 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org with 'CHIPSET: your board name' in the subject line. Super I/O ID 0x8721 is not on the list of flash capable controllers. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Chip status register is 00 Found Winbond flash chip "W25Q80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Found Winbond flash chip "W25Q80" (1024 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). No operations were specified.

1 0

Re: [flashrom] flashrom OPCODES for SPI
by Николай Николаев 07 Feb '13

07 Feb '13

Hi David thank for answer 2013/2/7 David Hendricks <dhendrix(a)google.com> > We usually use the .feature_bits member to distinguish these capabilities. > The feature you describe uses "FEATURE_ADDR_AAA" and corresponds to > spi_aai_write(). > I think adding an array of structs struct inside of the flashchip struct > would be more effort than it is worth. It would make working with the > flashchip data structure more complicated, and we'd need to add nested > loops whenever we iterate over the flashchip array. It would also require > flexible arrays which may cause problems with certain compilers. > Sorry but i don't see this "usually" in this code strings for example: { .vendor = "SST", .name = "SST25VF040B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25vf040b, .unlock = spi_disable_blockprotect, .write = spi_aai_write, /* "FEATURE_ADDR_AAA" ? */ this is a fetch The software must will use spi_chip_write_256 function. .read = spi_chip_read, .voltage = {2700, 3600}, }, and i thinking that this struct is a little complicated because: 1. this struct has not used field like a voltage and this field can't uniquely define chip voltage because different chips can have a equivalent ID 2. this struct has a not informative field like a name for example that is that - SST25VF040B.REMS. Sorry but i can't understanding different SST25VF040B and that is REMS - is this a comment or other? and i can't found documentation on SST25VF040B.REMS chip. Next example EN25Q80(A) Is this a two chips EN25Q80 and EN25Q80A or other? Is this chip EN25Q80 real? I think adding an array of structs struct inside of the flashchip struct > would be more effort than it is worth. > I think adding an array of struct will be not effort, but testing a software will be effort. > It would make working with the flashchip data structure more complicated, > and we'd need to add nested loops whenever we iterate over the flashchip > array. It would also require flexible arrays which may cause problems with > certain compilers. > If we know chip ID that we can easy searching any chip parameters in other structure. And i think we can easy exclude this parameters from structure The MX25L25835E actually should look the same as MX25L12805D from a > software perspective. The difference is that MX25L25835E is stacked (two > 128Mbit flash memories). Each bank is selected by a different chip-select > line (referred to as CS#1 and CS#2 in the data sheet). > thanks. I'm understanding this is a simple stack but we have a one ID on two different chips..... Will user use flashrom software for program MX25L25835E if software didn't support this chip in list on wiki page, but support MX25L12805D? How will you distinguish chip MX25L25835E from MX25L12805D that chips have a equivalent chip ID. What do you think about link on chip Documentation on wiki page? -- With best regards Nikolay Nikolaev

1 0

Re: [flashrom] flashrom OPCODES for SPI
by David Hendricks 06 Feb '13

06 Feb '13

On Wed, Feb 6, 2013 at 4:35 AM, Николай Николаев <evrinoma(a)gmail.com> wrote: > Hi Stefan > > Sorry but i don't want disprove you, i just have a many free time and i > want to improve this project. But the dispute burning truth. 8) > All time from my last mail i'm searching spi flash chips documentation and > I found about 445 chips different brand and sorted them. > May be it will be useful for all community. We will made host with > SPI(Parallel and other) flash chips documentations and add link on wiki > page. > for example > Eon EN25Q64(link to pdf) 8192 SPI ? ? ? ? 2.700 3.600 > > Studied documentation i regularity see that all chips has a support > standard OPcodes like this > WR DATA 0X02 > READ DATA 0X03 > WR DIS 0X04 > READ STATUS 0X05 > WR ENA 0X06 > ... > exclude 10 Atmel chips from amount 445 and for him we will must write > special driver > > and special OPcodes like a > Fast Dual read 0x3B > Auto Address increment 0xAD > and others - that codes is a different fetches spi flash chips > > What does this mean. This mean that a spi controller has a standard > OPcodes for all flash chips and special OPcodes for each one flash chip. > But if we will change flash chip on other flash chip with different special > OPcodes that we will must replace special OPcodes. If we will not do it > that we can't use special OPcodes, but we can use standard OPcodes. > So, for more compatibility we will must verify - Does flash chip support > special OPcodes?. And if chip will support them that we will use them, but > if chip will not support them that we will use a standard OPcodes. > for example: > MX25L6405 > The function write chip used standard OPcodes flash chip called function > spi_chip_write_256 > SST25VF016B > The function write chip used fetches OPcodes flash chip called function > spi_aai_write > If we can't change OPcodes in registers our SPI controller that we will > not write data to chip if we replace them. > But we will make a program check supporting OPcodes and switch a function > from spi_aai_write on spi_chip_write_256 > After that we can easy write to flash > or fast - our SPI controller has supporting fetches OPcodes > or slow - our SPI controller hasn't supporting fetches OPcodes > We usually use the .feature_bits member to distinguish these capabilities. The feature you describe uses "FEATURE_ADDR_AAA" and corresponds to spi_aai_write(). > Also i want to suggest exclude from struct flashchip {} parameters > voltage, name and add array of struct like a chipdata. > The struct chipdata contains information about all possible chip names and > various parameters > Because looked chips documents i see chips that have a one model_id but > have a various chips name, various voltage and various capacity > for example > MX25U6435F and MX25L6439E MX25L12805D and MX25L25835E > You're correct about the naming of similar chips. We introduced a schema to work with this last year to try and deal with the naming: http://www.flashrom.org/pipermail/flashrom/2012-July/009598.html I think adding an array of structs struct inside of the flashchip struct would be more effort than it is worth. It would make working with the flashchip data structure more complicated, and we'd need to add nested loops whenever we iterate over the flashchip array. It would also require flexible arrays which may cause problems with certain compilers. The MX25L25835E actually should look the same as MX25L12805D from a software perspective. The difference is that MX25L25835E is stacked (two 128Mbit flash memories). Each bank is selected by a different chip-select line (referred to as CS#1 and CS#2 in the datasheet). HTH! -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Fwd: msi windpad 110w
by Seryi Kuznecov 06 Feb '13

06 Feb '13

Hello I want to flash the bios in msi windpad 110w. Russia stands for version 2.07. Around the world 1.06. How do I change the version to 1.06? Standard methods does not work, is an error "error: bios cannot be updated" (most likely defense costs). Protection to remove Bios can not. This option is not present. Help put the bios 1.06. chip MX25L1606E Thank you for your project A non-text attachment has been stripped: EN0E1AMS.106 It is available at http://paste.flashrom.org/view.php?id=1543 A non-text attachment has been stripped: EN0E1AMS.207 It is available at http://paste.flashrom.org/view.php?id=1544

1 0

Re: [flashrom] flashrom OPCODES for SPI
by Николай Николаев 06 Feb '13

06 Feb '13

Hi Stefan Sorry but i don't want disprove you, i just have a many free time and i want to improve this project. But the dispute burning truth. 8) All time from my last mail i'm searching spi flash chips documentation and I found about 445 chips different brand and sorted them. May be it will be useful for all community. We will made host with SPI(Parallel and other) flash chips documentations and add link on wiki page. for example Eon EN25Q64(link to pdf) 8192 SPI ? ? ? ? 2.700 3.600 Studied documentation i regularity see that all chips has a support standard OPcodes like this WR DATA 0X02 READ DATA 0X03 WR DIS 0X04 READ STATUS 0X05 WR ENA 0X06 ... exclude 10 Atmel chips from amount 445 and for him we will must write special driver and special OPcodes like a Fast Dual read 0x3B Auto Address increment 0xAD and others - that codes is a different fetches spi flash chips What does this mean. This mean that a spi controller has a standard OPcodes for all flash chips and special OPcodes for each one flash chip. But if we will change flash chip on other flash chip with different special OPcodes that we will must replace special OPcodes. If we will not do it that we can't use special OPcodes, but we can use standard OPcodes. So, for more compatibility we will must verify - Does flash chip support special OPcodes?. And if chip will support them that we will use them, but if chip will not support them that we will use a standard OPcodes. for example: MX25L6405 The function write chip used standard OPcodes flash chip called function spi_chip_write_256 SST25VF016B The function write chip used fetches OPcodes flash chip called function spi_aai_write If we can't change OPcodes in registers our SPI controller that we will not write data to chip if we replace them. But we will make a program check supporting OPcodes and switch a function from spi_aai_write on spi_chip_write_256 After that we can easy write to flash or fast - our SPI controller has supporting fetches OPcodes or slow - our SPI controller hasn't supporting fetches OPcodes Also i want to suggest exclude from struct flashchip {} parameters voltage, name and add array of struct like a chipdata. The struct chipdata contains information about all possible chip names and various parameters Because looked chips documents i see chips that have a one model_id but have a various chips name, various voltage and various capacity for example MX25U6435F and MX25L6439E MX25L12805D and MX25L25835E

1 0

flashrom ignoring ROM layout region
by John Gainsborough 05 Feb '13

05 Feb '13

With BusPirate (v3a, firmware 5.10) and flashrom (v0.9.5.2, little endian) I am attempting to read a region of the flash ROM defined by a ROM layout file as in: flashrom -p buspirate_spi:dev=/dev/ ttyUSB0,spispeed=200k -l romlayout -i region1 -r read file Where file romlayout contains: 003f0000:003fffff region1 The flash ROM IC is correctly identified, and region1 is listed as being used, however flashrom then proceeds to read all ROM memory, not just the area defined by region1. I have run this procedure with flash ROMs: Eon EN25Q32 and EN25Q64. also Micronix MX25L6445 Eventually I plan to use this procedure for writing to a defined region. Any help/suggestions gratefully received. John G

1 0

flashrom OPCODES for SPI
by Николай Николаев 05 Feb '13

05 Feb '13

Hi Stefan Sorry but i don't want disprove you, i just have a many free time and i want to improve this project. But the dispute burning truth. 8) All time from my last mail i'm searching spi flash chips documentation and I found about 445 chips different brand and sorted them. May be it will be useful for all community. We will made host with SPI(Parallel and other) flash chips documentations and add link on wiki page. for example Eon EN25Q64(link to pdf) 8192 SPI ? ? ? ? 2.700 3.600 Studied documentation i regularity see that all chips has a support standard OPcodes like this WR DATA 0X02 READ DATA 0X03 WR DIS 0X04 READ STATUS 0X05 WR ENA 0X06 ... exclude 10 Atmel chips from amount 445 and for him we will must write special driver and special OPcodes like a Fast Dual read 0x3B Auto Address increment 0xAD and others - that codes is a different fetches spi flash chips What does this mean. This mean that a spi controller has a standard OPcodes for all flash chips and special OPcodes for each one flash chip. But if we will change flash chip on other flash chip with different special OPcodes that we will must replace special OPcodes. If we will not do it that we can't use special OPcodes, but we can use standard OPcodes. So, for more compatibility we will must verify - Does flash chip support special OPcodes?. And if chip will support them that we will use them, but if chip will not support them that we will use a standard OPcodes. for example: MX25L6405 The function write chip used standard OPcodes flash chip called function spi_chip_write_256 SST25VF016B The function write chip used fetches OPcodes flash chip called function spi_aai_write If we can't change OPcodes in registers our SPI controller that we will not write data to chip if we replace them. But we will make a program check supporting OPcodes and switch a function from spi_aai_write on spi_chip_write_256 After that we can easy write to flash or fast - our SPI controller has supporting fetches OPcodes or slow - our SPI controller hasn't supporting fetches OPcodes Also i want to suggest exclude from struct flashchip {} parameters voltage, name and add array of struct like a chipdata. The struct chipdata contains information about all possible chip names and various parameters Because looked chips documents i see chips that have a one model_id but have a various chips name, various voltage and various capacity for example MX25U6435F and MX25L6439E MX25L12805D and MX25L25835E .... -- With best regards Nikolay Nikolaev С Уважением Николаев Николай

1 0

Simple diagram for modern laptop booting flow
by Антон Кочков 04 Feb '13

04 Feb '13

Hello! Here is simple diagram for booting flow of modern Intel laptops. Feel free to ask questions, request for improvements, giving hints. Why Intel? Just because it is more complex than modern AMD systems. Why laptop? Same reason - more complex than desktop. If you have an idea howto merge laptop and desktop booting in one diagram - please share. Attaching both png result and MS Visio 2010 source. Best regards, Anton Kochkov.

1 0

[commit] r1648 - trunk
by repository service 04 Feb '13

04 Feb '13

Author: stefanct Date: Mon Feb 4 05:38:42 2013 New Revision: 1648 URL: http://flashrom.org/trac/flashrom/changeset/1648 Log: Fix building for MacOSX. - Add a new macro named IS_MACOSX to hwaccess.c and use it to enable iopl(). This was broken since r1638. This fix does *not* restore the very permissive concept where iopl() was activated in an #else branch that was inplace before r1638. - Make printing the image file's size in flashrom.c platform independent. Bonus: remove definitions of off64_t and lseek64 which are not necessary anymore for about 1000 commits. Thanks to SJ for reporting the issue and testing the solution. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.c trunk/hwaccess.c trunk/hwaccess.h Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sat Feb 2 16:35:44 2013 (r1647) +++ trunk/flashrom.c Mon Feb 4 05:38:42 2013 (r1648) @@ -1121,8 +1121,8 @@ return 1; } if (image_stat.st_size != size) { - msg_gerr("Error: Image size (%ld B) doesn't match the flash chip's size (%ld B)!\n", - image_stat.st_size, size); + msg_gerr("Error: Image size (%jd B) doesn't match the flash chip's size (%ld B)!\n", + (intmax_t)image_stat.st_size, size); fclose(image); return 1; } Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Sat Feb 2 16:35:44 2013 (r1647) +++ trunk/hwaccess.c Mon Feb 4 05:38:42 2013 (r1648) @@ -28,7 +28,8 @@ #define IS_BSD (defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) || defined(__OpenBSD__)) #define IS_LINUX (defined(__gnu_linux__) || defined(__linux__)) -#if !(IS_BSD || IS_LINUX || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) +#define IS_MACOSX (defined(__APPLE__) && defined(__MACH__)) +#if !(IS_BSD || IS_LINUX || IS_MACOSX || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) #error "Unknown operating system" #endif @@ -72,7 +73,7 @@ sysi86(SI86V86, V86SC_IOPL, 0); #elif IS_BSD close(io_fd); -#elif IS_LINUX +#elif IS_LINUX || IS_MACOSX iopl(0); #endif return 0; @@ -87,7 +88,7 @@ if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { #elif IS_BSD if ((io_fd = open("/dev/io", O_RDWR)) < 0) { -#elif IS_LINUX +#elif IS_LINUX || IS_MACOSX if (iopl(3) != 0) { #endif msg_perr("ERROR: Could not get I/O privileges (%s).\n" Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Sat Feb 2 16:35:44 2013 (r1647) +++ trunk/hwaccess.h Mon Feb 4 05:38:42 2013 (r1648) @@ -189,8 +189,6 @@ * versions. Use machine/cpufunc.h only for plain FreeBSD/DragonFlyBSD. */ #include <machine/cpufunc.h> - #define off64_t off_t - #define lseek64 lseek #define OUTB(x, y) do { u_int outb_tmp = (y); outb(outb_tmp, (x)); } while (0) #define OUTW(x, y) do { u_int outw_tmp = (y); outw(outw_tmp, (x)); } while (0) #define OUTL(x, y) do { u_int outl_tmp = (y); outl(outl_tmp, (x)); } while (0) @@ -201,8 +199,6 @@ #if defined(__MACH__) && defined(__APPLE__) /* Header is part of the DirectHW library. */ #include <DirectHW/DirectHW.h> - #define off64_t off_t - #define lseek64 lseek #endif #if defined (__sun) && (defined(__i386) || defined(__amd64)) /* Note different order for outb */ @@ -241,8 +237,6 @@ #endif #if defined(__NetBSD__) || defined (__OpenBSD__) - #define off64_t off_t - #define lseek64 lseek #if defined(__i386__) || defined(__x86_64__) #include <sys/types.h> #include <machine/sysarch.h>

1 0

Flashrom ignoring ROM layout regions
by John Gainsborough 04 Feb '13

04 Feb '13

With BusPirate (v3a, firmware 5.10) and flashrom (v0.9.5.2, little endian) I am attempting to read a region of the flash ROM defined by a ROM layout file as in: flashrom -p buspirate_spi:dev=/dev/ttyUSB0,spispeed=200k -l romlayout -i region1 -r read file Where file romlayout contains: 003f0000:003fffff region1 The flash ROM IC is correctly identified, and region1 is listed as being used, however flashrom then proceeds to read all ROM memory, not just the area defined by region1. I have run this procedure with flash ROMs: Eon EN25Q32 and EN25Q64. also Micronix MX25L6445 Eventually I plan to use this procedure for writing to a defined region. Any help/suggestions gratefully received. John G

1 0

chip W25Q80 chipset NVIDIA MCP61 motherboard Asrock N68C-S UCC
by Александр Трубицын 03 Feb '13

03 Feb '13

Hello! i try to use flashrom with motherboard Asrock N68C-S UCC http://www.asrock.com/mb/manual.asp?Model=N68C-S%20UCC http://www.asrock.com/mb/overview.ru.asp?cat=Manual&Model=N68C-S%20UCC with NVIDIA MCP61 chipset and W25Q80 chip. It is a part of russian manufacture'r computer Depo Ego 9730 http://www.depo.ru/download/drivers/2010/User_Manual/DEPO_Ego_manual_2010.p… I don't find any switches to enabe/disable flash writing on motherboard and in the bios menu. i use OpenSuse 12.2 with this script #!/bin/bash # get information about flash chip & BIOS name="W25Q80_chipset_NVIDIA_MCP61_on_Asrock_N68C-S_UCC" sudo /usr/sbin/flashrom -V > $name.V.txt sudo /usr/sbin/flashrom -VVVr $name.flash > $name.Vr.txt sudo /usr/sbin/flashrom -VVVE > $name.VE.txt sudo /usr/sbin/lspci -nnvvxxx > $name.lspci_nnvvxxx.txt sudo /usr/sbin/superiotool -deV > $name.superiotool.txt and get some warnings from flashrom. There are script's output files in attachment.

2 1

ASUS M5A97: success
by Melchior FRANZ 03 Feb '13

03 Feb '13

Hey, a few days ago I successfully flashed an ASUS M5A97 bios (version 0705 to 1605). No problems whatsoever, whereas the BIOS-builtin "AZ Flash 2" turned out to be useless: it didn't even recognize my FAT usb stick. $ sudo /usr/local/sbin/flashrom --programmer internal -w M5A97-ASUS-1605.ROM flashrom v0.9.6.1-r1646 on Linux 3.7.5 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... OK. Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. Output from "flashrom -V --programmer=internal" attached. W25Q32 ... chip already listed as supported AMD SB7x0/SB8x0/SB9x0 ... chipset already listed as supported -> ASUS M5A97 ... mainboard *NOT* listed yet Thanks for flashrom! m.

2 7

[PATCH] Fix evil twins of Macronix MX25L1605, MX25L3205, MX25L6405.
by Stefan Tauner 03 Feb '13

03 Feb '13

Similarly to the previous patch this one updates the chips identified as above with references to and data about their respective twins. Unlike previously this one deals with the more evil details. Helge Wagner from GE discovered some problems with chips sharing IDs and proposed a patch to tackle (some of) them, see: http://patchwork.coreboot.org/patch/3709/ That patch was bitrotting in our mailboxes for a long time and it is still not ready for merge, but we increasingly get reports about problems (e.g. http://paste.flashrom.org/view.php?id=1525) regarding these chips and hence must act to ensure users' safety. This patch splits the chip definitions of evil twins into separate ones which correctly declare the respective attributes (the main problems are the erase block sizes for the 0x20 opcode and hence my changes combine different chips with partly different attributes apart from their names as long as the erasers layout it the same). This forces the user to select the (right) chip definition with the -c/--chip parameter and hence will break a number of previously perfectly working environments. 0x2015 is used by and split to - MX25L1605 (64kB sectors in 0x20 erases) - MX25L1605A (4kB in 0x20 erases and an additional 0x52 opcode with 64kB blocks) - MX25L1605D/MX25L1608D (4k sectors in 0x20 erases) 0x2016 is used by and split to - MX25L3205, MX25L3205A (64kB 0x20) - MX25L3205D/MX25L3208D (4kB 0x20) - MX25L3206E (4k 0x20, 64k 0x52) 0x2017 is used by and split to - MX25L6405 MX25L6405D (64k 0x20) - MX25L6406E/MX25L6436E (4k 0x20) - MX25L6445E (4k 0x20, 64k 0x52) Bonus: add some minor details to MX25L1635D, MX25L1635E, MX25L3235D, MX25L12805D. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- TODO after merging this: - implement probing methods that are able to distinguish at least some of the evil twins. - where this is not possible discuss alternatives like the somewhat fail-safe spi_block_erase_20_4or64k() by Helge - find and spank the ones reponsible for this whole mess. --- flashchips.c | 270 +++++++++++++++++++++++++++++++++++++++++++++++++++++----- flashchips.h | 8 +- 2 files changed, 252 insertions(+), 26 deletions(-) diff --git a/flashchips.c b/flashchips.c index b976ee6..1783fe7 100644 --- a/flashchips.c +++ b/flashchips.c @@ -5270,10 +5270,45 @@ const struct flashchip flashchips[] = { .block_erasers = { { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_default_bp2, /* bit6: error flag */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L1605A", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1605, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, /* This erase function has 64k blocksize for eLiteFlash */ + .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 32} }, /* Not supported in MX25L1605 (eLiteFlash) and MX25L1605D */ + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -5286,10 +5321,45 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L1605D/MX25L1608D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1605, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6: CP mode */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, }, @@ -5301,7 +5371,8 @@ const struct flashchip flashchips[] = { .model_id = MACRONIX_MX25L1635D, .total_size = 2048, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5321,10 +5392,10 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, @@ -5336,7 +5407,8 @@ const struct flashchip flashchips[] = { .model_id = MACRONIX_MX25L1635E, .total_size = 2048, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5356,16 +5428,16 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L3205", + .name = "MX25L3205(A)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, @@ -5378,12 +5450,87 @@ const struct flashchip flashchips[] = { .block_erasers = { { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_default_bp2, /* bit6: error flag */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3205D/MX25L3208D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6: CP mode */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3206E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { @@ -5391,10 +5538,10 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, }, @@ -5406,7 +5553,8 @@ const struct flashchip flashchips[] = { .model_id = MACRONIX_MX25L3235D, .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 256B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5426,7 +5574,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -5435,13 +5583,14 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L6405", + .name = "MX25L6405(D)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5461,7 +5610,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 has different meanings */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -5470,13 +5619,90 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L12805", + .name = "MX25L6406E/MX25L6436E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 for 36E is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L6445E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L12805(D)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L12805, .total_size = 16384, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5496,10 +5722,10 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp3, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* MX25L12805D: Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, diff --git a/flashchips.h b/flashchips.h index d123ab0..22af0e3 100644 --- a/flashchips.h +++ b/flashchips.h @@ -387,10 +387,10 @@ #define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C */ #define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C */ #define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005 */ -#define MACRONIX_MX25L1605 0x2015 /* MX25L1605{,A,D} */ -#define MACRONIX_MX25L3205 0x2016 /* MX25L3205{,A} */ -#define MACRONIX_MX25L6405 0x2017 /* MX25L6405{,D}, MX25L6406E, MX25L6436E */ -#define MACRONIX_MX25L12805 0x2018 /* MX25L12805 */ +#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20); MX25L1605A (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D (4k 0x20) */ +#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52) */ +#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E (4k 0x20, 64k 0x52) */ +#define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D */ #define MACRONIX_MX25L1635D 0x2415 #define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */ #define MACRONIX_MX25U1635E 0x2535 -- Kind regards, Stefan Tauner

1 0

[commit] r1647 - trunk
by repository service 02 Feb '13

02 Feb '13

Author: stefanct Date: Sat Feb 2 16:35:44 2013 New Revision: 1647 URL: http://flashrom.org/trac/flashrom/changeset/1647 Log: Update Macronix MX25L512, MX25L1005, MX25L2005, MX25L4005, MX25L8005. Update MX25L512 with references to and data about MX25L512E, MX25V512, MX25V512C. Update MX25L1005 with references to and data about MX25L1005C, MX25L1006E. Update MX25L2005 with references to and data about MX25L2005C. Update MX25L4005 with references to and data about MX25L4005A, MX25L4005C. Update MX25L8005 with references to and data about MX25V8005. Bonus: add chip IDs of MX25U1635E, MX25U3235E/F, MX25U6435E/F. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Jan 15 18:37:48 2013 (r1646) +++ trunk/flashchips.c Sat Feb 2 16:35:44 2013 (r1647) @@ -5068,12 +5068,13 @@ { .vendor = "Macronix", - .name = "MX25L512", + .name = "MX25L512(E)/MX25V512(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L512, .total_size = 64, .page_size = 256, + /* MX25L512E supports SFDP */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -5097,21 +5098,22 @@ .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp1, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp1, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ }, { .vendor = "Macronix", - .name = "MX25L1005", + .name = "MX25L1005(C)/MX25L1006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1005, .total_size = 128, .page_size = 256, + /* MX25L1006E supports SFDP */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -5132,16 +5134,16 @@ .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp1, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L2005", + .name = "MX25L2005(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L2005, @@ -5170,16 +5172,16 @@ .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp1, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L4005", + .name = "MX25L4005(A/C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L4005, @@ -5208,16 +5210,16 @@ .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L8005", + .name = "MX25L8005/MX25V8005", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L8005, @@ -5246,11 +5248,11 @@ .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_default_bp3, /* TODO: check */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ }, { Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Tue Jan 15 18:37:48 2013 (r1646) +++ trunk/flashchips.h Sat Feb 2 16:35:44 2013 (r1647) @@ -382,10 +382,10 @@ * and use the same set of IDs. */ #define MACRONIX_ID 0xC2 /* Macronix (MX) */ -#define MACRONIX_MX25L512 0x2010 /* Same as MX25V512 */ -#define MACRONIX_MX25L1005 0x2011 -#define MACRONIX_MX25L2005 0x2012 -#define MACRONIX_MX25L4005 0x2013 /* MX25L4005{,A} */ +#define MACRONIX_MX25L512 0x2010 /* Same as MX25L512E, MX25V512, MX25V512C */ +#define MACRONIX_MX25L1005 0x2011 /* Same as MX25L1005C, MX25L1006E */ +#define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C */ +#define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C */ #define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005 */ #define MACRONIX_MX25L1605 0x2015 /* MX25L1605{,A,D} */ #define MACRONIX_MX25L3205 0x2016 /* MX25L3205{,A} */ @@ -393,6 +393,9 @@ #define MACRONIX_MX25L12805 0x2018 /* MX25L12805 */ #define MACRONIX_MX25L1635D 0x2415 #define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */ +#define MACRONIX_MX25U1635E 0x2535 +#define MACRONIX_MX25U3235E 0x2536 /* Same as MX25U6435F */ +#define MACRONIX_MX25U6435E 0x2537 /* Same as MX25U6435F */ #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18

1 0

Re: [flashrom] Fw: Appreciate for developing HM65 BIOS R\W tool SW
by zhuzhihui 01 Feb '13

01 Feb '13

Dear Stefan Nice to hear from you,we follow your kindly suggestion to upgrade Flashrom from 0.9.4 to 0.9.6, and run command #flashrom -p internal –VV in mentioned Topstar TEB-H8100 manboard,but below the outputt information: flashrom v0.9.6.1-r1564 on Linux 2.6.35.6-45.fc14.i686 (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.5.1 20100924 (Red Hat 4.5.1-4), little endian Command line (3 args): flashrom -p internal -VV Calibrating delay loop... OS timer resolution is 6 usecs, 1096M loops per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 1001 us, 10000 myus = 10005 us, 24 myus = 24 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Topstar Corporation" DMI string system-product-name: "TEB-H8100" DMI string system-version: "0.1" DMI string baseboard-manufacturer: "Topstar Corp." DMI string baseboard-product-name: "TEB-H8100" DMI string baseboard-version: "FAB1" DMI string chassis-type: "Laptop" Laptop detected via DMI. Found ITE Super I/O, ID 0x8782 on port 0x2e Would you pls help analyze above info and give us more indication on restrictions? Thanks. Have a nice weekend! Brs\Jake zhu & David Du From: 杜新雷 Date: 2013-02-01 11:04 To: zhuzhihui Subject: Fw: Re: [flashrom] Appreciate for developing HM65 BIOS R\W tool SW 杜新雷 From: 杜新雷 Date: 2013-01-23 09:44 To: flashrom CC: 缪总; zhuzhihui Subject: Re: Re: [flashrom] Appreciate for developing HM65 BIOS R\W tool SW Hello Stefan , I am very pleased to receive your letter，depending on your tips flashrom version upgrade from 0.9.4 to 0.9.6 OS: FC14 Core Ver.2.6.35.6--45.fc14.i686 (i686) and used following command #flashrom -p internal –VV Following is the output information: flashrom v0.9.6.1-r1564 on Linux 2.6.35.6-45.fc14.i686 (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.5.1 20100924 (Red Hat 4.5.1-4), little endian Command line (3 args): flashrom -p internal -VV Calibrating delay loop... OS timer resolution is 6 usecs, 1096M loops per second, 10 myus = 11 us, 100 myus = 102 us, 1000 myus = 1001 us, 10000 myus = 10005 us, 24 myus = 24 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Topstar Corporation" DMI string system-product-name: "TEB-H8100" DMI string system-version: "0.1" DMI string baseboard-manufacturer: "Topstar Corp." DMI string baseboard-product-name: "TEB-H8100" DMI string baseboard-version: "FAB1" DMI string chassis-type: "Laptop" Laptop detected via DMI. Found ITE Super I/O, ID 0x8782 on port 0x2e we do appreciate for your great help to develop the mentioned tools SW within next week，thank you! Kind regards/David From: Stefan Tauner Date: 2013-01-19 10:03 To: 朱智会 CC: flashrom; 'duxinlei' Subject: Re: [flashrom] Appreciate for developing HM65 BIOS R\W tool SW On Thu, 17 Jan 2013 17:28:53 +0800 朱智会 <zhuzhihui(a)chinalotsynergy.com> wrote: > Dear Sir/Madam > > > > This is Jake zhu and David Du from China Lotsynergy, our company is an IPC > based system integrated provider located in Guangzhou, China. To meet our > customer’s requirement of providing a BIOS R\W tool (OS: FC14 Core Ver. 2. > 6.35.6--45.fc14.i686 (i686)), we tried to seek proper tool in internet and > found FlashRom at the first time. > > We downloaded FlashRom Ver L: v0.9.4-r1455 and used following command > #flashrom -r sysbios.bin, but fail with below error info: > > > > After double check the supported chipset list in website, we found the South > Bridge Chipset HM65 is not supported; however BIOS Flash Chip (W25Q32) is > supported (see below). > > > > So write to you for help to develop a BIOS R\W tools SW (/OS: FC14 Core Ver. > 2.6.35.6--45.fc14.i686 (i686), and below the necessary info for your > reference, due to tight schedule of project, we do appreciate for your great > help to develop the mentioned tools SW within next week. Hello David, in general the chipset as well as the flash chip are well supported by flashrom. The Intel chipsets can however be configured to restrict flash access very firmly. There are various ways to restrict it (forbidden opcodes, write- and read-protected addresses ranges of different kinds etc.). If the board does not set up too many restrictions, flashrom will work for you without problems. The "error" (it is a warning actually, and you can and should read about the details in the man page how to force flashrom to continue) is because the SMBIOS/DMI table in the firmware indicates that it is a mobile device and those sometimes behave in dangerous ways. This is especially the case if the flash chip is not attached to the southbridge but and EC which is sitting between the southbridge and the flash chip. You should also update to a newer version, 0.9.4 is pretty old and I have done quite some work on the intel-related code. When you found out how to tell flashrom to continue even though it thinks it is running on a laptop please send us the output of flashrom -p internal -VV I can then tell you some details about the restrictions set up in the current firmware. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

2009 era -L output
by Robert S. Done, Ph.D. 31 Jan '13

31 Jan '13

Hi, Short version: I am trying to reset/remove Computrace in a Lenovo T500 laptop. If you have a solution, please share. Long version: I am trying to adapt the attached Python script but it relies on an earlier version of Flashrom. So far, I find two issues: 1) The newer version of Flashrom require the -p parameter, which is easy to fix in the script. 2) The script also seems to rely on a specific format of the -L output. See the line in def dumpTheHardWay(): if line.find("chipsets")>0: The output file is created, but the subsequent loop to parse the chip list does not find "chipsets". I contacted Core Security but they have not provided an update to the Python script, so I am trying to figure it out. The Python script is from 2009, so can you provide a sample of the -L output from a 2009 version of Flashrom so I can make the parsing loop work? Yes, I have read the disclaimer about using Flashrom on laptops. I did not receive any warnings when running the attached so hopefully it won't brick the T500. Thanks, Robert

3 9

W836xx: HP Mini 110-3700: flashrom -V
by Olivier Langlois 29 Jan '13

29 Jan '13

Hi, I am following the instruction found in the flashrom -V output. I want to attempt replacing the evil RSA signed Insyde BIOS that stops me from installing PCIe Mini cards of my choice. I do not fully understand yet all the output of flashrom and why the flash chip autodetection is limited to a very small subset of the supported chips but I have taken a look on the motherboard and I have spotted a Winbond W25Q16 chip on it. I have started to modify inteltool and msrtool in order to support my processor (Intel Atom N455). I will probably join your dev mailing list to offer my patches when they are ready and also ask advices for my coreboot project. Thank you,

3 5

Re: [flashrom] Success report
by Stefan Tauner 26 Jan '13

26 Jan '13

Hello Gui, thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

USB 3 PCI Card support (request to add device)
by Philipp Post 24 Jan '13

24 Jan '13

Good day, following configuration: - USB 3 PCI (not PCI-Express) card with RENESAS uPD720200A(Revision 4) USB chip and ATMEL AT25F512B (ATMEL 1138, 25F512B, SSH) rom chip in - IBM NetVista 8305 Desktop PC - built year 2003 The issue with the card is that it needs a flash rom update to work with Windows Vista and up, otherwise the device does not work at all in these OS ("device cannot start"). Windows XP with Renesas drivers and Linux Ubuntu 11.3 out of the box works fine. RENESAS has a rom update for the chip and a flash update tool which however does not work with PCI cards, but just chips soldered to mainboards. At least this seems to me the reason why it does not work. Chip is recognized but the RENESAS tool says "Can not load / access firmware". The tool has the option to change the device / vendor id as well via .ini file. The card used is the only PCI USB 3 card on the market and basically works very well when it works - with max PCI speed of course, which means approx. double speed of USB 2. The card exists in hardware version 1 (RENESAS chip uPD720200A) and 2 (RENESAS chip uPD720202). I do just have access to hardware version 1. The name of the manufacturer behind the card is unknown to me, but it could be an ADDONICS product. I do not have a technical drawing of the card and I fear I can not obtain one but I do have the card itself. My question: would it be possible to incorporate this card into flashrom? Would be great if someone could do it as I do not have the necessary skills to do it myself. In case you need further information, please let me know. Thanks in advance, brgds Philipp Links and further reading: -------------------------- Card Information from different sellers (same card): http://www.addonics.com/products/ad2u3pci.php http://eu.startech.com/Cards-Adapters/USB-3.0/Cards/2-Port-PCI-SuperSpeed-US B-3-Card-Adapter~PCIUSB3S2 http://www.lindy.de/premium-usb-3-karte-2-port-pci/51082.html ATMEL rom specification (contains info how to write rom images): www.atmel.com/Images/doc3689.pdf Renesas USB chip information: http://www.renesas.eu/products/soc/usb_assp/product/upd720200a/index.jsp RENESAS rom update 4.0.2.0 with Windows updater (32 + 64 Bit) and drivers: http://www.station-drivers.com/page/renesas.htm We need: "Firmware Version 4.0.2.0 pour uPD720200a" RENESAS MS DOS flash update tool (which did not do the job): http://www.computerbase.de/forum/attachment.php?attachmentid=283282&d=133832 3319 IBM NetVista 8305 Hardware Maintenance Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/netvista_pdf/24p2969.pdf Hardware Ids: Renesas Electronics USB 3.0 Host Controller: PCI\VEN_1033&DEV_0194&SUBSYS_01941033&REV_04\5&25043F3&0&0048F0 Renesas Electronics USB 3.0 Root Hub NUSB3\ROOT_HUB30\6&2D374EF3&2

1 0

Appreciate for developing HM65 BIOS R\W tool SW
by 朱智会 23 Jan '13

23 Jan '13

Dear Sir/Madam This is Jake zhu and David Du from China Lotsynergy, our company is an IPC based system integrated provider located in Guangzhou, China. To meet our customer’s requirement of providing a BIOS R\W tool (OS: FC14 Core Ver. 2. 6.35.6--45.fc14.i686 (i686)), we tried to seek proper tool in internet and found FlashRom at the first time. We downloaded FlashRom Ver L: v0.9.4-r1455 and used following command #flashrom -r sysbios.bin, but fail with below error info: After double check the supported chipset list in website, we found the South Bridge Chipset HM65 is not supported; however BIOS Flash Chip (W25Q32) is supported (see below). So write to you for help to develop a BIOS R\W tools SW (/OS: FC14 Core Ver. 2.6.35.6--45.fc14.i686 (i686), and below the necessary info for your reference, due to tight schedule of project, we do appreciate for your great help to develop the mentioned tools SW within next week. South Bridge Chipset: HM65 (Inter) BIOS Flash Chip: W25Q32BV (Specification as attached) // Main board provider claim this SPI Flash connect to HM65 directly Super I/O: IT8782 (ITE) Thanks for your great help again! Brs\ Jake zhu & David Du _____ 发件人: 杜新雷 [mailto:duxinlei@chinalotsynergy.com] 发送时间: 2013年1月14日 11:01 收件人: zhuzhihui 主题: 转发: help _____ 杜新雷发件人： <mailto:duxinlei@chinalotsynergy.com> 杜新雷发送时间： 2013-01-06 15:18 收件人： flashrom <mailto:flashrom@flashrom.org> 主题： help hello, Os :fedora 14 Linux 2.6.35.6-45.fc14.i686 (i686) Flashrom version : v0.9.4-r1455 #flashrom -r sysbios.bin error: mainboards information Flash chip Vendor Southbridge PCI IDs Status intel HM65 8086:1c49 ? embedded controller mode SIO chip： IT8782 vendor :ITE mainboards Vendor mainboards Required Status topstar TEB-H8100 Hope to be able to make support topstar motherboard of TEB - H8100 flashrom program to ease of use, thank you! _____ David Best regard！

3 2

Success report
by Gui Iribarren 20 Jan '13

20 Jan '13

As suggested by the program, since the chip i was flashing was not recognized, i'm sending the log of a successful read, erase and write of the flash chip, so that it can be marked as "working" in the wiki / source code. Cheers!

1 0

Adaptec AHA-2940UW
by Marcos Felipe Rasia de Mello 19 Jan '13

19 Jan '13

Hi, I have here an Adaptec AHA-2940UW. Its firmware chip (OTP ROM AT27C512R) was soldered, but now I put a socket DIP-32 (PCB is prepared to 32-pin chips). Apparently flashrom does not have any support for this card. If you need any testing please let me know. To replace the OTP ROM I have EPROMs TMS27C512 (do not know if they can be reprogrammed in place -- I have the UV eraser) and lots of flash chips AT29C010A (128KiB). No 64KiB flash chip :-( Marcos

1 0

Re: [flashrom] Intel 82802AB report
by Pavel Shvagirev 19 Jan '13

19 Jan '13

Hello The MB is Acorp 6M810C quite an old one ;) 11.01.2013 23:41, Idwer Vollering пишет: > 2013/1/11 Pavel Shvagirev <pavel.shvagirev(a)gmail.com>: >> Hello >> >> Here's a listing showing that this chip is OK: > Thanks for the info, though we are more interested in the name of the > mainboard that this flash chip is on. > The chip itself is known to fully work: > http://flashrom.org/Supported_hardware#Supported_chips -- Best regards, Pavel Shvagirev skype: pavel.shvagirev

2 2

Re: [flashrom] 2009 era -L output
by Robert S. Done, Ph.D. 18 Jan '13

18 Jan '13

Have you been able to review the output and determine how to deal with Computrace? Thanks, Robert -----Original Message----- From: flashrom-bounces+rdone=cox.net(a)flashrom.org [mailto:flashrom-bounces+rdone=cox.net@flashrom.org] On Behalf Of Robert S. Done, Ph.D. Sent: Tuesday, January 15, 2013 8:05 PM To: flashrom(a)flashrom.org Subject: Re: [flashrom] 2009 era -L output Attached is the output. Also, here is info on a Dell. Probably a different chip, but maybe the details (offset 0�50) will be useful. http://stephane.emisfr.info/2009/09/08/getting-rid-of-computrace-on-dell-in… Thanks, Robert -----Original Message----- From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at] Sent: Tuesday, January 15, 2013 7:44 PM To: Robert S. Done, Ph.D. Cc: flashrom(a)flashrom.org Subject: Re: [flashrom] 2009 era -L output On Tue, 15 Jan 2013 19:29:44 -0700 "Robert S. Done, Ph.D." <rdone(a)cox.net> wrote: > To clarify, you want me to run flashrom -p internal:laptop=force_I_want_a_brick -VV ? yes, so that we can investigate what the underlying problem is. -- Kind regards/Mit freundlichen Gr??en, Stefan Tauner

1 0

Logs for Asus P5KPL-AM IN/GB
by user 18 Jan '13

18 Jan '13

Logs for Asus P5KPL-AM IN/GB.

2 1

[commit] r1646 - trunk
by repository service 15 Jan '13

15 Jan '13

Author: stefanct Date: Tue Jan 15 18:37:48 2013 New Revision: 1646 URL: http://flashrom.org/trac/flashrom/changeset/1646 Log: Fix duplicate 'const' declaration specifiers. Thanks to Idwer and clang for noticing these problems. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/bitbang_spi.c trunk/dummyflasher.c trunk/ich_descriptors.c trunk/ichspi.c Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Tue Jan 8 23:49:12 2013 (r1645) +++ trunk/bitbang_spi.c Tue Jan 15 18:37:48 2013 (r1646) @@ -26,33 +26,33 @@ #include "spi.h" /* Note that CS# is active low, so val=0 means the chip is active. */ -static void bitbang_spi_set_cs(const const struct bitbang_spi_master *master, int val) +static void bitbang_spi_set_cs(const struct bitbang_spi_master * const master, int val) { master->set_cs(val); } -static void bitbang_spi_set_sck(const const struct bitbang_spi_master *master, int val) +static void bitbang_spi_set_sck(const struct bitbang_spi_master * const master, int val) { master->set_sck(val); } -static void bitbang_spi_set_mosi(const const struct bitbang_spi_master *master, int val) +static void bitbang_spi_set_mosi(const struct bitbang_spi_master * const master, int val) { master->set_mosi(val); } -static int bitbang_spi_get_miso(const const struct bitbang_spi_master *master) +static int bitbang_spi_get_miso(const struct bitbang_spi_master * const master) { return master->get_miso(); } -static void bitbang_spi_request_bus(const const struct bitbang_spi_master *master) +static void bitbang_spi_request_bus(const struct bitbang_spi_master * const master) { if (master->request_bus) master->request_bus(); } -static void bitbang_spi_release_bus(const const struct bitbang_spi_master *master) +static void bitbang_spi_release_bus(const struct bitbang_spi_master * const master) { if (master->release_bus) master->release_bus(); Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Tue Jan 8 23:49:12 2013 (r1645) +++ trunk/dummyflasher.c Tue Jan 15 18:37:48 2013 (r1646) @@ -66,7 +66,7 @@ static uint8_t emu_status = 0; /* A legit complete SFDP table based on the MX25L6436E (rev. 1.8) datasheet. */ -static const uint8_t const sfdp_table[] = { +static const uint8_t sfdp_table[] = { 0x53, 0x46, 0x44, 0x50, // @0x00: SFDP signature 0x00, 0x01, 0x01, 0xFF, // @0x04: revision 1.0, 2 headers 0x00, 0x00, 0x01, 0x09, // @0x08: JEDEC SFDP header rev. 1.0, 9 DW long Modified: trunk/ich_descriptors.c ============================================================================== --- trunk/ich_descriptors.c Tue Jan 8 23:49:12 2013 (r1645) +++ trunk/ich_descriptors.c Tue Jan 15 18:37:48 2013 (r1646) @@ -335,7 +335,7 @@ void prettyprint_ich_descriptor_straps_ibex(const struct ich_desc_south_strap *s) { - static const uint8_t const dec_t209min[4] = { + static const uint8_t dec_t209min[4] = { 100, 50, 5, Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Tue Jan 8 23:49:12 2013 (r1645) +++ trunk/ichspi.c Tue Jan 15 18:37:48 2013 (r1646) @@ -1127,7 +1127,7 @@ static uint32_t ich_hwseq_get_erase_block_size(unsigned int addr) { uint8_t enc_berase; - static const uint32_t const dec_berase[4] = { + static const uint32_t dec_berase[4] = { 256, 4 * 1024, 8 * 1024,

1 0

Re: [flashrom] flashrom behavior report: Supermicro X9SCM w/FlashROM 0.9.6.1
by Stefan Tauner 15 Jan '13

15 Jan '13

On Mon, 14 Jan 2013 17:26:03 -0500 Rich <rercola(a)pha.jhu.edu> wrote: > Read: failed > Write: warned me against trying, not going to try if even a read fails > Verify: See Read > > Logs of all 3 actions attached. > > - Rich If anyone wonders... it's actually a tar.gz.gz containing the common locked ME case. Thanks for the report Rich. I'll add the board to our list of our (un)supported boards. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom behavior report: Supermicro X9SCM w/FlashROM 0.9.6.1
by Rich 14 Jan '13

14 Jan '13

Read: failed Write: warned me against trying, not going to try if even a read fails Verify: See Read Logs of all 3 actions attached. - Rich

1 0

Intel D425KT mostly successful flash
by Marek Zakrzewski 14 Jan '13

14 Jan '13

If I read BIOS and then write it on the same machine then it works. If I read BIOS from the other board but with newer BIOS and write on the old one then it doesn't work. Why is this happening ? flashrom v0.9.6.1-r1564 on Linux 3.0.57-1.el5.elrepo (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-52), little endian Command line (3 args): flashrom --programmer=internal -Vw plik2.bin Calibrating delay loop... OS timer resolution is 1 usecs, 434M loops per second, 10 myus = 9 us, 100 myus = 97 us, 1000 myus = 985 us, 10000 myus = 9796 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel NM10" with PCI ID 8086:27bc. Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xa WARNING: Setting 0xdc from 0xa to 0xb on NM10 failed. New value is 0xa. Root Complex Register Block address = 0xfed1c000 GCS = 0x280465: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x7f10 (SPIC) 0x04: 0x000fffc0 (SPIA) 0x08: 0x19000040 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0xeb4150bf (SPID2) 0x1c: 0x0000001d (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0xffff0434 (SPID4) 0x2c: 0xffffff50 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x8be9090f (SPID6) 0x3c: 0x000000f8 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0xffff0000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0606 (PREOP) 0x56: 0x103b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x0001009f (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Macronix flash chip "MX25L8005" (1024 kB, SPI). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0x7fdbc0d44070 Restoring PCI config space for 00:1f:0 reg 0xdc This one is newer BIOS: flashrom v0.9.6.1-r1564 on Linux 3.0.57-1.el5.elrepo (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-52), little endian Command line (3 args): flashrom --programmer=internal -Vw d425kt.bin Calibrating delay loop... OS timer resolution is 1 usecs, 417M loops per second, 10 myus = 9 us, 100 myus = 93 us, 1000 myus = 1072 us, 10000 myus = 9576 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel NM10" with PCI ID 8086:27bc. Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xa WARNING: Setting 0xdc from 0xa to 0xb on NM10 failed. New value is 0xa. Root Complex Register Block address = 0xfed1c000 GCS = 0x280465: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x7f10 (SPIC) 0x04: 0x000fffc0 (SPIA) 0x08: 0x19000040 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0xeb4150bf (SPID2) 0x1c: 0x0000001d (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0xffff0434 (SPID4) 0x2c: 0xffffff50 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x8be9090f (SPID6) 0x3c: 0x000000f8 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0xffff0000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0606 (PREOP) 0x56: 0x103b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x0001009f (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Macronix flash chip "MX25L8005" (1024 kB, SPI). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:ERunning OPCODE 0x20 failed at address 0x000000 (payload length was 0). Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x00ffff:EInvalid OPCODE 0x06, will not execute. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:EInvalid OPCODE 0x06, will not execute. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x0fffff:EInvalid OPCODE 0x06, will not execute. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x0fffff:EInvalid OPCODE 0x06, will not execute. Looking for another erase function. No usable erase functions left. Good. It seems nothing was changed. Restoring MMIO space at 0x7fc1c7ab7070 Restoring PCI config space for 00:1f:0 reg 0xdc

2 3

Intel 82802AB report
by Pavel Shvagirev 12 Jan '13

12 Jan '13

Hello Here's a listing showing that this chip is OK: 1. what we have: root@srv:~# flashrom | grep Found Found chipset "Intel ICH", enabling flash write... OK. Found chip "Intel 82802AB" (512 KB, FWH) at physical address 0xfff80000. root@srv:~# 2. what we're supposed to get: root@srv:/home/ps# flashrom -L | grep 82802AB Intel 82802AB P R 512 FWH 3. what we're going to update with: root@srv:/home/ps# md5sum ./6M810C.BIN da69cb2651c9f8fe6acd875dc4d66ade ./6M810C.BIN 4. the process itself: root@srv:/root# flashrom -w ./6M810C.BIN flashrom v0.9.2-r1141 on Linux 2.6.32-5-686 (i686), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH", enabling flash write... OK. This chipset supports the following protocols: FWH. Found chip "Intel 82802AB" (512 KB, FWH) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... DONE BLOCK 0x0 DONE BLOCK 0x10000 DONE BLOCK 0x20000 DONE BLOCK 0x30000 DONE BLOCK 0x40000 DONE BLOCK 0x50000 DONE BLOCK 0x60000 DONE BLOCK 0x70000 SUCCESS. Programming at: DONE!ss: 0x0007f000 COMPLETE. Verifying flash... VERIFIED. root@srv:/root# THANK YOU FOR THE PROGRAM! -- Best regards, Pavel Shvagirev skype: pavel.shvagirev

3 3

Report: Invalid Invalid entry length (0). DMI table is broken! Stop. Invalid entry length (0). DMI table is broken! Stop. read
by dpcimanager＠users.sourceforge.net 12 Jan '13

12 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): /Applications/DPCIManager 2.app/Contents/MacOS/flashrom -VV -r ~/Desktop/test2.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 598M loops per second, 10 myus = 9 us, 100 myus = 102 us, 1000 myus = 978 us, 10000 myus = 10270 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "Invalid entry length (0). DMI table is broken! Stop." DMI string system-product-name: "Invalid entry length (0). DMI table is broken! Stop." DMI string system-version: "Invalid entry length (0). DMI table is broken! Stop." DMI string baseboard-manufacturer: "Invalid entry length (0). DMI table is broken! Stop." DMI string baseboard-product-name: "Invalid entry length (0). DMI table is broken! Stop." DMI string baseboard-version: "Invalid entry length (0). DMI table is broken! Stop." DMI string chassis-type: "Invalid entry length (0). DMI table is broken! Stop." DMI chassis-type is not specific enough. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: ASRock H67M-ITX/HT P2.20 write
by dpcimanager＠users.sourceforge.net 11 Jan '13

11 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Desktop/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/w1/x33dbtzd7p3g230w64k9b8vw0000gn/T/DPCILRSaFM.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 502M loops per second, 10 myus = 10 us, 100 myus = 116 us, 1000 myus = 1036 us, 10000 myus = 10421 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "H67M-ITX/HT" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00010000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0010 FREG2: WARNING: Management Engine region (0x00010000-0x003fffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc4 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf90000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x49300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x000f0000 FLREG1 0x07ff0400 FLREG2 0x03ff0010 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x0000ffff Region 1 (BIOS ) 0x00400000 - 0x007fffff Region 2 (ME ) 0x00010000 - 0x003fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Chip status register is 00 Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xc4, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Restoring MMIO space at 0x1030028a0 Restoring PCI config space for 00:1f:0 reg 0xdc ting.

1 0

Report: ASRock H67M-ITX/HT P2.20 read
by dpcimanager＠users.sourceforge.net 11 Jan '13

11 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Desktop/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Downloads/ASRock H67M-ITX:HT P2.20.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 501M loops per second, 10 myus = 11 us, 100 myus = 106 us, 1000 myus = 1050 us, 10000 myus = 10329 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "H67M-ITX/HT" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00010000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0010 FREG2: WARNING: Management Engine region (0x00010000-0x003fffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc4 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf90000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x49300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x000f0000 FLREG1 0x07ff0400 FLREG2 0x03ff0010 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x0000ffff Region 1 (BIOS ) 0x00400000 - 0x007fffff Region 2 (ME ) 0x00010000 - 0x003fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Chip status register is 00 Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xc4, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading flash... SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFCFAILED. Restoring MMIO space at 0x1022498a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

flashrom -V
by Метелев Сергей 11 Jan '13

11 Jan '13

Flashrom programm allow to save existing BIOS, but don't want to write new one. The original programm behavior, AFUDOS.EXE, exactly the same, it get the file from bios, but don't want to write to bios. Obtained bios files exactly the same, independently, wheter one was obtained with the help of flashrom or AFUDOS.EXE And both slightly differs with the BIOS downloaded from the ASUS site with the same number, 804. link to motherboard info http://www.asus.com/Motherboards/AMD_AM2/M2NMX/#download attached is my bios and the output of flashrom -V dmidecode -t bios flashrom --programmer internal -w M2NX1004.ROM Thank you, best regards ******************************************************************************************************* #flashrom -V flashrom v0.9.6-r1559 on Linux 3.6.11-gentoo (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with unknown PCI library, GCC 4.6.3, big endian Command line (1 args): flashrom -V Please select a programmer with the --programmer parameter. Valid choices are: internal, dummy, nic3com, gfxnvidia, drkaiser, satasii, serprog, buspirate_spi, dediprog, pony_spi, nicintel, nicintel_spi, ogp_spi, linux_spi ******************************************************************************************************* #dmidecode -t bios # dmidecode 2.10 SMBIOS 2.4 present. #Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 0804 Release Date: 05/28/2007 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.12 Handle 0x002E, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 ******************************************************************************************************* #flashrom --programmer internal -w M2NX1004.ROM flashrom v0.9.6-r1559 on Linux 3.6.11-gentoo (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "NVIDIA MCP61". Enabling flash write... This chipset is not really supported yet. Guesswork... Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... ERASE FAILED at 0x0000000c! Expected=0xff, Read=0x08, failed byte count from 0x00000000-0x00000fff: 0xf92 ERASE FAILED! Reading current flash chip contents... done. ERASE FAILED at 0x0000000c! Expected=0xff, Read=0x08, failed byte count from 0x00000000-0x0000ffff: 0xfe27 ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- -- Метелев Сергей научный сотрудник ОИТОЭР ПИЯФ (Отдел инженерно-технического обеспечения экспериментов на реакторе Петербургского Института Ядерной Физики) р.т. 8(81371)-4-62-85 моб. +7-921-324-68-40

1 0

Report: ASRock H67M-ITX/HT P2.20 read
by dpcimanager＠users.sourceforge.net 11 Jan '13

11 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Desktop/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Documents/ASRock H67M-ITX:HT P2.20.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 510M loops per second, 10 myus = 10 us, 100 myus = 110 us, 1000 myus = 1043 us, 10000 myus = 10254 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "H67M-ITX/HT" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0010 FREG2: WARNING: Management Engine region (0x00010000-0x003fffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc4 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf94240 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=2, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x49300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x000f0000 FLREG1 0x07ff0400 FLREG2 0x03ff0010 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x0000ffff Region 1 (BIOS ) 0x00400000 - 0x007fffff Region 2 (ME ) 0x00010000 - 0x003fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Chip status register is 00 Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xc4, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading flash... Transaction error! Read operation failed! FAILED. Restoring MMIO space at 0x10d4888a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASRock H67M-ITX/HT P2.20 write
by dpcimanager＠users.sourceforge.net 11 Jan '13

11 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Desktop/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/w1/x33dbtzd7p3g230w64k9b8vw0000gn/T/DPCIqecn8C.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 513M loops per second, 10 myus = 11 us, 100 myus = 118 us, 1000 myus = 1079 us, 10000 myus = 10379 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "H67M-ITX/HT" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00403548 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0010 FREG2: WARNING: Management Engine region (0x00010000-0x003fffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x49300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x000f0000 FLREG1 0x07ff0400 FLREG2 0x03ff0010 FLREG3 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x0000ffff Region 1 (BIOS ) 0x00400000 - 0x007fffff Region 2 (ME ) 0x00010000 - 0x003fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Chip status register is 00 Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xc4, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x5e, id2 0x0c, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x08, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Write/erase is not working yet on your programmer in its current configuration. Abor

1 0

Report: read
by dpcimanager＠users.sourceforge.net 11 Jan '13

11 Jan '13

flashrom v0.9.6.1-r1622 on Darwin 12.2.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, LLVM Clang 4.1 ((tags/Apple/clang-421.11.66)), little endian Command line (5 args): ~/Downloads/Applications/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/test.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 606M loops per second, 10 myus = 10 us, 100 myus = 103 us, 1000 myus = 1126 us, 10000 myus = 9904 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" DMI chassis-type is not specific enough. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Re: [flashrom] flashrom -V NVIDIA MCP61 ASUS M2N68-LA (Compaq Presario SR5019UK)
by Stefan Tauner 09 Jan '13

09 Jan '13

On Wed, 9 Jan 2013 11:33:18 +0000 Dave Murphy <davem(a)devkitpro.org> wrote: > Hi, > > I've just built flashrom from source and run it on my machine to see > if it's supported with a view to eventually working on coreboot for > this board. > > Any suggestiions on how to proceed from here? Hi Dave, I dont see a reason why flashrom would not work in the log (but there are some facts that may not be visible in the log without trying to write). For coreboot... I would get another board (NVidia is in general a dead end regarding coreboot). Please ask further coreboot-specific questions on the coreboot mailing list or its IRC channel. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom -V NVIDIA MCP61 ASUS M2N68-LA (Compaq Presario SR5019UK)
by Dave Murphy 09 Jan '13

09 Jan '13

Hi, I've just built flashrom from source and run it on my machine to see if it's supported with a view to eventually working on coreboot for this board. Any suggestiions on how to proceed from here? Dave

1 0

Re: [flashrom] Flashrom failure
by Leslie Rhorer 09 Jan '13

09 Jan '13

Yes, the backup file, created by `flashrom -r` is precisely 8M in size - no surprises there. How can I flash this system? It doesn't have DOS or Windows on it, and if I try to create a DOS image from which to boot, the 8M file won't fit on it. _____ From: David Hendricks [mailto:dhendrix@google.com] Sent: Tuesday, January 08, 2013 8:59 PM To: Leslie Rhorer Cc: flashrom Subject: Re: [flashrom] Flashrom failure You're fine :-) Apparently M5A99X-EVO-R20-ASUS-1302.CAP is not exactly 8MB, which is the size of your flash chip (W25Q64). This is just a simple sanity check flashrom uses to help prevent flashing the wrong file to your chip. I took a quick look at a BIOS image from Asus' website and it appears that they append 2KB to their BIOS image: 007ff060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00800780 50 45 49 45 2b ac f5 ff 10 00 00 00 00 00 00 00 |PEIE+...........| 00800790 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 008007f0 e9 0d e0 ff ff 00 00 10 00 00 78 56 00 00 f0 ff |..........xV....| 00800800 Usually this junk vendors append to their BIOSes is benign, but you never really know... I recommend looking around to see if anyone else has had success flashing this board using Flashrom. I do not recommend bypassing the size check or truncating the extra 2KB unless you have a means of recovering (Backup BIOS ROM, external programmer, etc). On Tue, Jan 8, 2013 at 5:26 PM, Leslie Rhorer <lrhorer(a)mygrande.net> wrote: I don't think I am in any jeopardy, but I need to make sure, because an attempted flashrom write failed. In addition, I would like to get it to work, because it as been recommended I upgrade the BIOS due to issues in lm-sensors. When I attempted to upgrade the BIOS, I got this error: RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0# flashrom -w M5A99X-EVO-R20-ASUS-1302.CAP flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK. This chipset supports the following protocols: LPC, FWH, SPI. Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Error: Image size doesn't match I then verified the flash image against the backup image and it apparently passed: RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0# flashrom -v Safety_BIOS.cap flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK. This chipset supports the following protocols: LPC, FWH, SPI. Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Verifying flash... VERIFIED. Am I in jeopardy, here? How can I get flashrom to properly write the new BIOS? _______________________________________________ flashrom mailing list flashrom(a)flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Flashrom failure
by Leslie Rhorer 09 Jan '13

09 Jan '13

I don't think I am in any jeopardy, but I need to make sure, because an attempted flashrom write failed. In addition, I would like to get it to work, because it as been recommended I upgrade the BIOS due to issues in lm-sensors. When I attempted to upgrade the BIOS, I got this error: RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0# flashrom -w M5A99X-EVO-R20-ASUS-1302.CAP flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK. This chipset supports the following protocols: LPC, FWH, SPI. Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Error: Image size doesn't match I then verified the flash image against the backup image and it apparently passed: RAID-Server:/RAID/Server-Main/Downloads/Asus Motherboards/M5A99X EVO R2.0# flashrom -v Safety_BIOS.cap flashrom v0.9.4-r1395 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB700/SB710/SB750/SB850". Enabling flash write... OK. This chipset supports the following protocols: LPC, FWH, SPI. Found Winbond flash chip "W25Q64" (8192 kB, SPI) at physical address 0xff800000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Verifying flash... VERIFIED. Am I in jeopardy, here? How can I get flashrom to properly write the new BIOS?

2 1

[PATCH] Fix compilation for DOS and non-x86 targets
by Carl-Daniel Hailfinger 08 Jan '13

08 Jan '13

Fixup for r1638. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-fix_compile_dos/hwaccess.c =================================================================== --- flashrom-fix_compile_dos/hwaccess.c (Revision 1644) +++ flashrom-fix_compile_dos/hwaccess.c (Arbeitskopie) @@ -65,31 +65,25 @@ #endif } +#if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) static int release_io_perms(void *p) { -#if IS_X86 -#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) - /* Nothing to release */ -#elif defined (__sun) +#if defined (__sun) sysi86(SI86V86, V86SC_IOPL, 0); #elif IS_BSD close(io_fd); #elif IS_LINUX iopl(0); #endif -#else -/* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ -#endif return 0; } +#endif /* Get I/O permissions with automatic permission release on shutdown. */ int rget_io_perms(void) { -#if IS_X86 -#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) - /* We have full permissions by default. */ -#elif defined (__sun) +#if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) +#if defined (__sun) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { #elif IS_BSD if ((io_fd = open("/dev/io", O_RDWR)) < 0) { @@ -107,7 +101,8 @@ register_shutdown(release_io_perms, NULL); } #else -/* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ + /* DJGPP and libpayload environments have full PCI port I/O permissions by default. */ + /* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ #endif return 0; } -- http://www.hailfinger.org/

1 1

[commit] r1645 - trunk
by repository service 08 Jan '13

08 Jan '13

Author: hailfinger Date: Tue Jan 8 23:49:12 2013 New Revision: 1645 URL: http://flashrom.org/trac/flashrom/changeset/1645 Log: Fix compilation for DOS and non-x86 targets. Fixup for r1638. Thanks to Idwer Vollering for testing. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/hwaccess.c Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Sun Jan 6 00:52:45 2013 (r1644) +++ trunk/hwaccess.c Tue Jan 8 23:49:12 2013 (r1645) @@ -65,31 +65,25 @@ #endif } +#if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) static int release_io_perms(void *p) { -#if IS_X86 -#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) - /* Nothing to release */ -#elif defined (__sun) +#if defined (__sun) sysi86(SI86V86, V86SC_IOPL, 0); #elif IS_BSD close(io_fd); #elif IS_LINUX iopl(0); #endif -#else -/* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ -#endif return 0; } +#endif /* Get I/O permissions with automatic permission release on shutdown. */ int rget_io_perms(void) { -#if IS_X86 -#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) - /* We have full permissions by default. */ -#elif defined (__sun) +#if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) +#if defined (__sun) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { #elif IS_BSD if ((io_fd = open("/dev/io", O_RDWR)) < 0) { @@ -107,7 +101,8 @@ register_shutdown(release_io_perms, NULL); } #else -/* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ + /* DJGPP and libpayload environments have full PCI port I/O permissions by default. */ + /* PCI port I/O support is unimplemented on PPC/MIPS and unavailable on ARM. */ #endif return 0; }

1 0

[RFC] Feature autodetection during compilation
by Carl-Daniel Hailfinger 08 Jan '13

08 Jan '13

We enable programmer compilation based on the following criteria: - Default off unless explicitly enabled (dediprog) - Default on unless explicitly disabled (dummy) - Default on if technically possible on target machine (linux_spi) - Default on if the required libs+headers are available (ft2232_spi) The last criterion is what causes pains to no end, at least with the current Makefile infrastructure. Yes, we (I) can maintain it, but in the long run we either need a separate configure script (which may or may not work in all envorinments where GNU make works, especially exotic platforms like Windows), or we switch to something like CMake (which doesn't have the required features in ancient versions AFAIK), or we use two chained Makefiles (which would not meet my definition of "fun"). Now why is the last criterion such a PITA? All other criteria have a hard fail/success test, i.e. if a required lib/header is missing, we stop compilation. However, this criterion has a soft fail/success test, i.e. if you enable a feature and the required libraries/headers are missing, the feature simply will be silently disabled. That sort of violates the principle of least surprise, and it's the reason why our current Makefile uses nasty tricks with external files to avoid reloading itself. I would like to switch ft2232_spi to "Default on if technically possible on target machine" and spit out an improved error message in case the headers are missing. Comments? Flames? Regards, Carl-Daniel -- http://www.hailfinger.org/

3 4

[PATCH] Fix linker flag bug introduced in r1623
by Carl-Daniel Hailfinger 08 Jan '13

08 Jan '13

Spotted by Idwer Vollering. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> and committed in r1623 Index: flashrom-Makefile_libusb_libpci_ldflags_fix/Makefile =================================================================== --- flashrom-Makefile_libusb_libpci_ldflags_fix/Makefile (Revision 1624) +++ flashrom-Makefile_libusb_libpci_ldflags_fix/Makefile (Revision 1625) @@ -710,10 +710,10 @@ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1) @printf "Checking if libpci is present and sufficient... " - @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(PCILIBS) >/dev/null && \ + @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) >/dev/null && \ echo "yes." || ( echo "no."; \ printf "Checking if libz+libpci are present and sufficient..."; \ - $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(PCILIBS) -lz >/dev/null && \ + $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >/dev/null && \ ( echo "yes."; echo "NEEDLIBZ := yes" > .libdeps ) || ( echo "no."; echo; \ echo "Please install libpci (package pciutils) and/or libz."; \ echo "See README for more information."; echo; \ @@ -729,7 +729,7 @@ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1) @printf "Checking if libusb-0.1 is usable... " - @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(USBLIBS) >/dev/null && \ + @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >/dev/null && \ echo "yes." || ( echo "no."; \ echo "Please install libusb-0.1 or libusb-compat."; \ echo "See README for more information."; echo; \ -- http://www.hailfinger.org/

1 1

help
by 杜新雷 07 Jan '13

07 Jan '13

hello, Os :fedora 14 Linux 2.6.35.6-45.fc14.i686 (i686) Flashrom version : v0.9.4-r1455 #flashrom -r sysbios.bin error: mainboards information Flash chip VendorSouthbridgePCI IDsStatus intelHM658086:1c49? embedded controller mode SIO chip： IT8782 vendor :ITE mainboards VendormainboardsRequired Status topstarTEB-H8100 Hope to be able to make support topstar motherboard of TEB - H8100 flashrom program to ease of use, thank you! David Best regard！

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom