- flashrom - mail.coreboot.org

[commit] r1738 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 10:29:06 2013 New Revision: 1738 URL: http://flashrom.org/trac/flashrom/changeset/1738 Log: Enable sector erase function for selected ST M50 chips. Affected chips: M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/stm50.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Sep 12 10:29:00 2013 (r1737) +++ trunk/flashchips.c Thu Sep 12 10:29:06 2013 (r1738) @@ -11022,7 +11022,7 @@ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, - .block_erase = NULL, + .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_block_82802ab, @@ -11055,7 +11055,7 @@ {64 * 1024, 5}, /* block */ {4 * 1024, 16}, /* sector */ }, - .block_erase = NULL, + .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_block_82802ab, @@ -11088,7 +11088,7 @@ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, - .block_erase = NULL, + .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 16}, }, .block_erase = erase_block_82802ab, @@ -11121,7 +11121,7 @@ {64 * 1024, 13}, /* block */ {4 * 1024, 16}, /* sector */ }, - .block_erase = NULL, + .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 16}, }, .block_erase = erase_block_82802ab, Modified: trunk/stm50.c ============================================================================== --- trunk/stm50.c Thu Sep 12 10:29:00 2013 (r1737) +++ trunk/stm50.c Thu Sep 12 10:29:06 2013 (r1738) @@ -84,10 +84,9 @@ return 0; } -/* This function is unused. */ -int erase_sector_stm50(struct flashctx *flash, unsigned int sector, unsigned int sectorsize) +static int stm50_erase_sector(struct flashctx *flash, unsigned int addr) { - chipaddr bios = flash->virtual_memory + sector; + chipaddr bios = flash->virtual_memory + addr; // clear status register chip_writeb(flash, 0x50, bios); @@ -96,8 +95,21 @@ chip_writeb(flash, 0xd0, bios); programmer_delay(10); - wait_82802ab(flash); + uint8_t status = wait_82802ab(flash); + print_status_82802ab(status); - /* FIXME: Check the status register for errors. */ - return 0; + return status == 0x80; +} + +/* Some ST M50* chips do support erasing of sectors. This function will derive the erase function to use from + * the length of the of the block. For calls that apparently do not address a sector (but a block) we just call + * the block erase function instead. FIXME: This duplicates the behavior of the remaining erasers for blocks and + * might be fixed when flashrom supports multiple functions per eraser or erasers that do erase parts of the + * chip only. */ +int erase_sector_stm50(struct flashctx *flash, unsigned int addr, unsigned int len) +{ + if (len == 4096) + return stm50_erase_sector(flash, addr); + else + return erase_block_82802ab(flash, addr, len); }

1 0

[commit] r1737 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 10:29:00 2013 New Revision: 1737 URL: http://flashrom.org/trac/flashrom/changeset/1737 Log: Add support for ST M50LPW080. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Sep 12 10:28:56 2013 (r1736) +++ trunk/flashchips.c Thu Sep 12 10:29:00 2013 (r1737) @@ -11240,6 +11240,31 @@ { .vendor = "ST", + .name = "M50LPW080", + .bustype = BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50LPW080, + .total_size = 1024, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_uniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", .name = "M50LPW116", .bustype = BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Thu Sep 12 10:28:56 2013 (r1736) +++ trunk/flashchips.h Thu Sep 12 10:29:00 2013 (r1737) @@ -668,6 +668,7 @@ #define ST_M50FW040 0x2C #define ST_M50FW080 0x2D #define ST_M50FW016 0x2E +#define ST_M50LPW080 0x2F #define ST_M50LPW116 0x30 #define ST_M29F002B 0x34 /* Same as M29F002BB */ #define ST_M29F002T 0xB0 /* Same as M29F002BT/M29F002NT/M29F002BNT */

1 0

[commit] r1736 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 10:28:56 2013 New Revision: 1736 URL: http://flashrom.org/trac/flashrom/changeset/1736 Log: Cleanup ST M50 driver. There are two locking strategies used by this umbrella family, one uniform and one that matches the sector layout of the chip. Refactor the functions involved and rename the overly complicated file to just stm50.c and the functions accordingly. This fixes unlocking of some of the non-uniform chips and gets rid of the abuse of page_size. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Added: trunk/stm50.c (contents, props changed) Deleted: trunk/stm50flw0x0x.c Modified: trunk/82802ab.c trunk/Makefile trunk/chipdrivers.h trunk/flashchips.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Thu Sep 12 01:35:03 2013 (r1735) +++ trunk/82802ab.c Thu Sep 12 10:28:56 2013 (r1736) @@ -89,6 +89,7 @@ return 1; } +/* FIXME: needs timeout */ uint8_t wait_82802ab(struct flashctx *flash) { uint8_t status; Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Sep 12 01:35:03 2013 (r1735) +++ trunk/Makefile Thu Sep 12 10:28:56 2013 (r1736) @@ -320,7 +320,7 @@ ############################################################################### # Flash chip drivers and bus support infrastructure. -CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \ +CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o spi25_statusreg.o \ opaque.o sfdp.o en29lv640b.o at45db.o Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Thu Sep 12 01:35:03 2013 (r1735) +++ trunk/chipdrivers.h Thu Sep 12 10:28:56 2013 (r1736) @@ -193,9 +193,10 @@ /* w29ee011.c */ int probe_w29ee011(struct flashctx *flash); -/* stm50flw0x0x.c */ -int erase_sector_stm50flw0x0x(struct flashctx *flash, unsigned int block, unsigned int blocksize); -int unlock_stm50flw0x0x(struct flashctx *flash); +/* stm50.c */ +int erase_sector_stm50(struct flashctx *flash, unsigned int block, unsigned int blocksize); +int unlock_stm50_uniform(struct flashctx *flash); +int unlock_stm50_nonuniform(struct flashctx *flash); /* en29lv640b.c */ int probe_en29lv640b(struct flashctx *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Sep 12 01:35:03 2013 (r1735) +++ trunk/flashchips.c Thu Sep 12 10:28:56 2013 (r1736) @@ -11008,7 +11008,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW040A, .total_size = 512, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11028,8 +11028,8 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, .write = write_82802ab, + .unlock = unlock_stm50_uniform, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -11041,7 +11041,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW040B, .total_size = 512, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11061,8 +11061,8 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, .write = write_82802ab, + .unlock = unlock_stm50_uniform, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -11074,7 +11074,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW080A, .total_size = 1024, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PRE, .probe = probe_82802ab, @@ -11094,7 +11094,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_nonuniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11107,7 +11107,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW080B, .total_size = 1024, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11127,7 +11127,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_nonuniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11140,7 +11140,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FW002, .total_size = 256, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11157,7 +11157,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_nonuniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11170,7 +11170,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FW016, .total_size = 2048, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11182,7 +11182,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_uniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11195,7 +11195,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FW040, .total_size = 512, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, @@ -11207,7 +11207,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_uniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11220,7 +11220,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50FW080, .total_size = 1024, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PREW, .probe = probe_82802ab, @@ -11232,7 +11232,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_uniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ @@ -11245,7 +11245,7 @@ .manufacture_id = ST_ID, .model_id = ST_M50LPW116, .total_size = 2048, - .page_size = 64 * 1024, + .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, @@ -11263,7 +11263,7 @@ .block_erase = erase_block_82802ab, } }, - .unlock = unlock_stm50flw0x0x, + .unlock = unlock_stm50_nonuniform, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ Added: trunk/stm50.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/stm50.c Thu Sep 12 10:28:56 2013 (r1736) @@ -0,0 +1,103 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2008 Claus Gindhart <claus.gindhart(a)kontron.com> + * Copyright (C) 2009 Sean Nelson <audiohacked(a)gmail.com> + * Copyright (C) 2013 Stefan Tauner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * All ST M50 chips are locked on startup. Most of them have a uniform 64 kB block layout, but some have + * a non-uniform block/sector segmentation which has to be handled with more care. Some of the non-uniform + * chips support erasing of the 4 kB sectors with another command. + */ + +#include "flash.h" +#include "flashchips.h" +#include "chipdrivers.h" + +static int stm50_unlock_address(struct flashctx *flash, int offset) +{ + chipaddr wrprotect = flash->virtual_registers + 2; + static const uint8_t unlock_sector = 0x00; + msg_cdbg("unlocking at 0x%x\n", offset); + chip_writeb(flash, unlock_sector, wrprotect + offset); + if (chip_readb(flash, wrprotect + offset) != unlock_sector) { + msg_cerr("Cannot unlock address 0x%x\n", offset); + return -1; + } + return 0; +} + +/* Chips known to use a non-uniform block and sector layout for locking (as well as for erasing): + * Name Size Address range of lock registers + * M50FLW080A 1MB FFB00002 - FFBFF002 + * M50FLW080B 1MB FFB00002 - FFBFF002 + * M50FW002 256k FFBC0002 - FFBFC002 + * M50LPW116 2MB FFA00002 - FFBFC002 + */ +int unlock_stm50_nonuniform(struct flashctx *flash) +{ + int i; + struct eraseblock *eraseblocks = flash->chip->block_erasers[0].eraseblocks; + unsigned int done = 0; + for (i = 0; i < NUM_ERASEREGIONS && eraseblocks[i].count != 0; i++) { + unsigned int block_size = eraseblocks[i].size; + unsigned int block_count = eraseblocks[i].count; + + int j; + for (j = 0; j < block_count; j++) { + if (stm50_unlock_address(flash, done)) { + msg_cerr("UNLOCK FAILED!\n"); + return -1; + } + done += block_count * block_size; + } + } + return 0; +} + +/* Unlocking for uniform 64 kB blocks starting at offset 2 of the feature registers. */ +int unlock_stm50_uniform(struct flashctx *flash) +{ + int i; + for (i = 0; i < flash->chip->total_size * 1024; i+= 64 * 1024) { + if (stm50_unlock_address(flash, i)) { + msg_cerr("UNLOCK FAILED!\n"); + return -1; + } + } + return 0; +} + +/* This function is unused. */ +int erase_sector_stm50(struct flashctx *flash, unsigned int sector, unsigned int sectorsize) +{ + chipaddr bios = flash->virtual_memory + sector; + + // clear status register + chip_writeb(flash, 0x50, bios); + // now start it + chip_writeb(flash, 0x32, bios); + chip_writeb(flash, 0xd0, bios); + programmer_delay(10); + + wait_82802ab(flash); + + /* FIXME: Check the status register for errors. */ + return 0; +}

1 0

Re: [flashrom] [PATCH] Add an internal DMI decoder.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Wed, 28 Aug 2013 18:16:12 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Previously we had to rely on dmidecode to decode the DMI/SMBIOS table. > This patch integrates a DMI decoder into flashrom. The old behavior of calling > dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no. > > Significant portions of this patch were taken from dmidecode, hence add its > authors to the copyright notice (dmidecode is also GPL2+). We do a few things > differently though. First of all we do more bounds checking to prevent accessing > unmapped memory. We do not support disovery via EFI (yet), but memory > scanning only. We handle the chassis-type lock bit correctly which dmidecode > did not for a long while. > > The API to the rest of flashrom remains stable, but the output changes slightly. > To share as much code as possible (which actually is not much), i have added > dmi_fill methods that get called in dmi_init. They are reponsible to fill the > dmi_strings array and setting the is_laptop variable. After it is called, dmi_init > prints all dmi_strings. Previously the strings were printed in the order they were > discovered, followed by the chassis-type, which is now output earlier (in dmi_fill). > > Because DJGPP does not support strnlen a simple implementation was added > for it. > > This is still only available on x86; actually it is not even compiled in for other > architectures at all anymore. > > Signed-off-by: Sean Nelson<audiohacked(a)gmail.com> > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > Tested-by: Maciej Pijanka <maciej.pijanka(a)gmail.com> > Tested-by: Idwer Vollering <vidwer(a)gmail.com> > Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Committed in r1735 after testing it with FreeDOS too. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] DOS refinements.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Fri, 6 Sep 2013 11:24:40 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > This allows to use the DOS library trees stored in a user-specified directory. > > I have mirrored the needed patches, sources and binaries (the latter > are properly licensed to allow that) in the flashrom wiki, so use those > URLs instead of the original sources. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> self-acked and committed in r1734. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1735 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 01:35:03 2013 New Revision: 1735 URL: http://flashrom.org/trac/flashrom/changeset/1735 Log: Add an internal DMI decoder. Previously we had to rely on dmidecode to decode the DMI/SMBIOS table. This patch integrates a DMI decoder into flashrom. The old behavior of calling dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no. Significant portions of this patch were taken from dmidecode, hence add its authors to the copyright notice (dmidecode is also GPL2+). We do a few things differently though. First of all we do more bounds checking to prevent accessing unmapped memory. We do not support disovery via EFI (yet), but memory scanning only. We handle the chassis-type lock bit correctly which dmidecode did not for a long while. The API to the rest of flashrom remains stable, but the output changes slightly. To share as much code as possible (which actually is not much), i have added dmi_fill methods that get called in dmi_init. They are reponsible to fill the dmi_strings array and setting the is_laptop variable. After it is called, dmi_init prints all dmi_strings. Previously the strings were printed in the order they were discovered, followed by the chassis-type, which is now output earlier (in dmi_fill). Because DJGPP does not support strnlen a simple implementation was added for it. This is still only available on x86; actually it is not even compiled in for other architectures at all anymore. Signed-off-by: Sean Nelson<audiohacked(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Maciej Pijanka <maciej.pijanka(a)gmail.com> Tested-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile trunk/board_enable.c trunk/dmi.c trunk/physmap.c trunk/programmer.h Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Sep 12 01:34:57 2013 (r1734) +++ trunk/Makefile Thu Sep 12 01:35:03 2013 (r1735) @@ -440,6 +440,23 @@ endif ############################################################################### +# Handle CONFIG_* variables that depend on others set (and verified) above. + +# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled. +ifeq ($(TARGET_OS), libpayload) +ifeq ($(CONFIG_INTERNAL), yes) +ifeq ($(CONFIG_INTERNAL_DMI), no) +UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no +else +override CONFIG_INTERNAL_DMI = yes +endif +endif +endif + +# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode. +CONFIG_INTERNAL_DMI ?= yes + +############################################################################### # Programmer drivers and programmer support infrastructure. # Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below. @@ -447,10 +464,13 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o +PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o ifeq ($(ARCH), x86) PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o -PROGRAMMER_OBJS += ichspi.o ich_descriptors.o +PROGRAMMER_OBJS += ichspi.o ich_descriptors.o dmi.o +ifeq ($(CONFIG_INTERNAL_DMI), yes) +FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1' +endif else endif NEED_PCI := yes Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Sep 12 01:34:57 2013 (r1734) +++ trunk/board_enable.c Thu Sep 12 01:35:03 2013 (r1735) @@ -2560,6 +2560,7 @@ } } +#if defined(__i386__) || defined(__x86_64__) if (board->dmi_pattern) { if (!has_dmi_support) { msg_pwarn("Warning: Can't autodetect %s %s, DMI info unavailable.\n", @@ -2572,7 +2573,7 @@ continue; } } - +#endif // defined(__i386__) || defined(__x86_64__) return board; } Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Thu Sep 12 01:34:57 2013 (r1734) +++ trunk/dmi.c Thu Sep 12 01:35:03 2013 (r1735) @@ -1,7 +1,10 @@ /* * This file is part of the flashrom project. * + * Copyright (C) 2000-2002 Alan Cox <alan(a)redhat.com> + * Copyright (C) 2002-2010 Jean Delvare <khali(a)linux-fr.org> * Copyright (C) 2009,2010 Michael Karcher + * Copyright (C) 2011-2013 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,33 +29,28 @@ #include "flash.h" #include "programmer.h" -int has_dmi_support = 0; - -#if STANDALONE +#if defined(__i386__) || defined(__x86_64__) -/* Stub to indicate missing DMI functionality. - * has_dmi_support is 0 by default, so nothing to do here. - * Because dmidecode is not available on all systems, the goal is to implement - * the DMI subset we need directly in this file. - */ -void dmi_init(void) -{ -} +/* Enable SMBIOS decoding. Currently legacy DMI decoding is enough. */ +#define SM_SUPPORT 0 -int dmi_match(const char *pattern) -{ - return 0; -} +/* Strings longer than 4096 in DMI are just insane. */ +#define DMI_MAX_ANSWER_LEN 4096 -#else /* STANDALONE */ +int has_dmi_support = 0; -static const char *dmidecode_names[] = { - "system-manufacturer", - "system-product-name", - "system-version", - "baseboard-manufacturer", - "baseboard-product-name", - "baseboard-version", +static struct { + const char *const keyword; + const uint8_t type; + const uint8_t offset; + char *value; +} dmi_strings[] = { + { "system-manufacturer", 1, 0x04, NULL }, + { "system-product-name", 1, 0x05, NULL }, + { "system-version", 1, 0x06, NULL }, + { "baseboard-manufacturer", 2, 0x04, NULL }, + { "baseboard-product-name", 2, 0x05, NULL }, + { "baseboard-version", 2, 0x06, NULL }, }; /* This list is used to identify supposed laptops. The is_laptop field has the @@ -66,9 +64,9 @@ * The types below are the most common ones. */ static const struct { - unsigned char type; - unsigned char is_laptop; - const char *name; + uint8_t type; + uint8_t is_laptop; + char *name; } dmi_chassis_types[] = { {0x01, 2, "Other"}, {0x02, 2, "Unknown"}, @@ -86,20 +84,206 @@ {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ }; -#define DMI_COMMAND_LEN_MAX 260 -static const char *dmidecode_command = "dmidecode"; +#if CONFIG_INTERNAL_DMI == 1 +#ifdef __DJGPP__ /* There is no strnlen in DJGPP. FIXME: Move this to a common utility file. */ +size_t strnlen(const char *str, size_t n) +{ + size_t i; + for (i = 0; i < n && str[i] != '\0'; i++) + ; + return i; +} +#endif -static char *dmistrings[ARRAY_SIZE(dmidecode_names)]; +static bool dmi_checksum(const uint8_t * const buf, size_t len) +{ + uint8_t sum = 0; + size_t a; -/* Strings longer than 4096 in DMI are just insane. */ -#define DMI_MAX_ANSWER_LEN 4096 + for (a = 0; a < len; a++) + sum += buf[a]; + return (sum == 0); +} + +static char *dmi_string(uint8_t *buf, uint8_t string_id, uint8_t *limit) +{ + size_t i, len; + + if (string_id == 0) + return "Not Specified"; + + while (string_id > 1 && string_id--) { + if (buf > limit) { + msg_perr("DMI table is broken (string portion out of bounds)!\n"); + return "<OUT OF BOUNDS>"; + } + buf += strnlen((char *)buf, limit - buf) + 1; + } + + if (!*buf) /* as long as the current byte we're on isn't null */ + return "<BAD INDEX>"; + + len = strnlen((char *)buf, limit - buf); + if (len > DMI_MAX_ANSWER_LEN) + len = DMI_MAX_ANSWER_LEN; + + /* fix junk bytes in the string */ + for (i = 0; i < len; i++) + if (buf[i] < 32 || buf[i] >= 127) + buf[i] = ' '; + + return (char *)buf; +} + +static void dmi_chassis_type(uint8_t code) +{ + int i; + code &= 0x7f; /* bits 6:0 are chassis type, 7th bit is the lock bit */ + is_laptop = 2; + for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { + if (code == dmi_chassis_types[i].type) { + msg_pdbg("DMI string chassis-type: \"%s\"\n", dmi_chassis_types[i].name); + is_laptop = dmi_chassis_types[i].is_laptop; + break; + } + } +} + +static void dmi_table(uint32_t base, uint16_t len, uint16_t num) +{ + int i = 0, j = 0; + + uint8_t *dmi_table_mem = physmap_round("DMI Table", base, len); + if (dmi_table_mem == NULL) { + msg_perr("Unable to access DMI Table\n"); + return; + } + + uint8_t *data = dmi_table_mem; + uint8_t *limit = dmi_table_mem + len; + + /* SMBIOS structure header is always 4 B long and contains: + * - uint8_t type; // see dmi_chassis_types's type + * - uint8_t length; // data section w/ header w/o strings + * - uint16_t handle; + */ + while (i < num && data + 4 <= limit) { + /* - If a short entry is found (less than 4 bytes), not only it + * is invalid, but we cannot reliably locate the next entry. + * - If the length value indicates that this structure spreads + * accross the table border, something is fishy too. + * Better stop at this point, and let the user know his/her + * table is broken. + */ + if (data[1] < 4 || data + data[1] > limit) { + msg_perr("DMI table is broken (bogus header)!\n"); + break; + } + + if(data[0] == 3) { + if (data + 5 <= limit) + dmi_chassis_type(data[5]); + /* else the table is broken, but laptop detection is optional, hence continue. */ + } else + for (j = 0; j < ARRAY_SIZE(dmi_strings); j++) { + uint8_t offset = dmi_strings[j].offset; + uint8_t type = dmi_strings[j].type; + + if (data[0] != type) + continue; + + if (data[1] <= offset || data+offset > limit) { + msg_perr("DMI table is broken (offset out of bounds)!\n"); + goto out; + } + + /* Table will be unmapped, hence fill the struct with duplicated strings. */ + dmi_strings[j].value = strdup(dmi_string(data + data[1], data[offset], limit)); + } + /* Find next structure by skipping data and string sections */ + data += data[1]; + while (data + 1 <= limit) { + if (data[0] == 0 && data[1] == 0) + break; + data++; + } + data += 2; + i++; + } +out: + physunmap(dmi_table_mem, len); +} + +#if SM_SUPPORT +static int smbios_decode(uint8_t *buf) +{ + /* TODO: other checks mentioned in the conformance guidelines? */ + if (!dmi_checksum(buf, buf[0x05]) || + (memcmp(buf + 0x10, "_DMI_", 5) != 0) || + !dmi_checksum(buf + 0x10, 0x0F)) + return 0; + + dmi_table(mmio_readl(buf + 0x18), mmio_readw(buf + 0x16), mmio_readw(buf + 0x1C)); + + return 1; +} +#endif + +static int legacy_decode(uint8_t *buf) +{ + if (!dmi_checksum(buf, 0x0F)) + return 1; + + dmi_table(mmio_readl(buf + 0x08), mmio_readw(buf + 0x06), mmio_readw(buf + 0x0C)); + + return 0; +} + +int dmi_fill(void) +{ + size_t fp; + uint8_t *dmi_mem; + int ret = 1; + + msg_pdbg("Using Internal DMI decoder.\n"); + /* There are two ways specified to gain access to the SMBIOS table: + * - EFI's configuration table contains a pointer to the SMBIOS table. On linux it can be obtained from + * sysfs. EFI's SMBIOS GUID is: {0xeb9d2d31,0x2d88,0x11d3,0x9a,0x16,0x0,0x90,0x27,0x3f,0xc1,0x4d} + * - Scanning physical memory address range 0x000F0000h to 0x000FFFFF for the anchor-string(s). */ + dmi_mem = physmap_try_ro("DMI", 0xF0000, 0x10000); + if (dmi_mem == NULL) + return ret; + + for (fp = 0; fp <= 0xFFF0; fp += 16) { +#if SM_SUPPORT + if (memcmp(dmi_mem + fp, "_SM_", 4) == 0 && fp <= 0xFFE0) { + if (smbios_decode(dmi_mem + fp)) // FIXME: length check + goto out; + } else +#endif + if (memcmp(dmi_mem + fp, "_DMI_", 5) == 0) + if (legacy_decode(dmi_mem + fp) == 0) { + ret = 0; + goto out; + } + } + msg_pinfo("No DMI table found.\n"); +out: + physunmap(dmi_mem, 0x10000); + return ret; +} + +#else /* CONFIG_INTERNAL_DMI */ + +#define DMI_COMMAND_LEN_MAX 300 +static const char *dmidecode_command = "dmidecode"; static char *get_dmi_string(const char *string_name) { FILE *dmidecode_pipe; char *result; char answerbuf[DMI_MAX_ANSWER_LEN]; - char commandline[DMI_COMMAND_LEN_MAX + 40]; + char commandline[DMI_COMMAND_LEN_MAX]; snprintf(commandline, sizeof(commandline), "%s -s %s", dmidecode_command, string_name); @@ -138,46 +322,31 @@ /* Chomp trailing newline. */ if (answerbuf[0] != 0 && answerbuf[strlen(answerbuf) - 1] == '\n') answerbuf[strlen(answerbuf) - 1] = 0; - msg_pdbg("DMI string %s: \"%s\"\n", string_name, answerbuf); result = strdup(answerbuf); - if (!result) + if (result == NULL) msg_pwarn("Warning: Out of memory - DMI support fails"); return result; } -static int dmi_shutdown(void *data) -{ - int i; - for (i = 0; i < ARRAY_SIZE(dmistrings); i++) { - free(dmistrings[i]); - dmistrings[i] = NULL; - } - return 0; -} - -void dmi_init(void) +int dmi_fill(void) { int i; char *chassis_type; - if (register_shutdown(dmi_shutdown, NULL)) - return; - - has_dmi_support = 1; - for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++) { - dmistrings[i] = get_dmi_string(dmidecode_names[i]); - if (!dmistrings[i]) { - has_dmi_support = 0; - return; - } + msg_pdbg("Using External DMI decoder.\n"); + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + dmi_strings[i].value = get_dmi_string(dmi_strings[i].keyword); + if (dmi_strings[i].value == NULL) + return 1; } chassis_type = get_dmi_string("chassis-type"); if (chassis_type == NULL) - return; + return 0; /* chassis-type handling is optional anyway */ + msg_pdbg("DMI string chassis-type: \"%s\"\n", chassis_type); is_laptop = 2; for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) { @@ -185,6 +354,33 @@ break; } } + free(chassis_type); + return 0; +} + +#endif /* CONFIG_INTERNAL_DMI */ + +static int dmi_shutdown(void *data) +{ + int i; + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + free(dmi_strings[i].value); + dmi_strings[i].value = NULL; + } + return 0; +} + +void dmi_init(void) +{ + /* Register shutdown function before we allocate anything. */ + if (register_shutdown(dmi_shutdown, NULL)) { + msg_pwarn("Warning: Could not register DMI shutdown function - continuing without DMI info.\n"); + return; + } + + /* dmi_fill fills the dmi_strings array, and if possible sets the global is_laptop variable. */ + if (dmi_fill() != 0) + return; switch (is_laptop) { case 1: @@ -194,7 +390,13 @@ msg_pdbg("DMI chassis-type is not specific enough.\n"); break; } - free(chassis_type); + + has_dmi_support = 1; + int i; + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + msg_pdbg("DMI string %s: \"%s\"\n", dmi_strings[i].keyword, + (dmi_strings[i].value == NULL) ? "" : dmi_strings[i].value); + } } /** @@ -252,11 +454,11 @@ if (!has_dmi_support) return 0; - for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++) - if (dmi_compare(dmistrings[i], pattern)) + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) + if (dmi_compare(dmi_strings[i].value, pattern)) return 1; return 0; } -#endif /* STANDALONE */ +#endif // defined(__i386__) || defined(__x86_64__) Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Thu Sep 12 01:34:57 2013 (r1734) +++ trunk/physmap.c Thu Sep 12 01:35:03 2013 (r1735) @@ -328,6 +328,11 @@ return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_CLEANUP, PHYSM_ROUND); } +void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len) +{ + return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_ROUND); +} + void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len) { return physmap_common(descr, phys_addr, len, PHYSM_MAYFAIL, PHYSM_RO, PHYSM_NOCLEANUP, PHYSM_EXACT); Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Thu Sep 12 01:34:57 2013 (r1734) +++ trunk/programmer.h Thu Sep 12 01:35:03 2013 (r1735) @@ -277,6 +277,7 @@ /* physmap.c */ void *physmap(const char *descr, uintptr_t phys_addr, size_t len); void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len); +void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len); void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len); void physunmap(void *virt_addr, size_t len); #if CONFIG_INTERNAL == 1 @@ -288,9 +289,11 @@ int cb_check_image(uint8_t *bios, int size); /* dmi.c */ +#if defined(__i386__) || defined(__x86_64__) extern int has_dmi_support; void dmi_init(void); int dmi_match(const char *pattern); +#endif // defined(__i386__) || defined(__x86_64__) /* internal.c */ struct superio {

1 0

[commit] r1734 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 01:34:57 2013 New Revision: 1734 URL: http://flashrom.org/trac/flashrom/changeset/1734 Log: DOS refinements. This allows to use the DOS library trees stored in a user-specified directory. I have mirrored the needed patches, sources and binaries (the latter are properly licensed to allow that) in the flashrom wiki, so use those URLs instead of the original sources. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile trunk/README Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Sep 10 12:42:48 2013 (r1733) +++ trunk/Makefile Thu Sep 12 01:34:57 2013 (r1734) @@ -39,6 +39,7 @@ EXPORTDIR ?= . AR ?= ar RANLIB ?= ranlib +DOSLIBS_BASE ?= .. # The following parameter changes the default programmer that will be used if there is no -p/--programmer # argument given when running flashrom. The predefined setting does not enable any default so that every # user has to declare the programmer he wants to use on every run. The rationale for this to be not set @@ -99,11 +100,12 @@ ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe -CPPFLAGS += -I../libgetopt +CPPFLAGS += -I$(DOSLIBS_BASE)/libgetopt # DJGPP has odd uint*_t definitions which cause lots of format string warnings. CFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt -LIBS += ../libgetopt/libgetopt.a +LIBS += -lgetopt +LDFLAGS += -L$(DOSLIBS_BASE)/libgetopt/ # Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes @@ -611,9 +613,9 @@ PCILIBS += -l$(shell uname -p) else ifeq ($(TARGET_OS), DOS) -# FIXME There needs to be a better way to do this -CPPFLAGS += -I../libpci/include -PCILIBS += ../libpci/lib/libpci.a +CPPFLAGS += -I$(DOSLIBS_BASE)/libpci/include +LDFLAGS += -L$(DOSLIBS_BASE)/libpci/lib/ +PCILIBS += -lpci else PCILIBS += -lpci ifeq ($(TARGET_OS), OpenBSD) Modified: trunk/README ============================================================================== --- trunk/README Tue Sep 10 12:42:48 2013 (r1733) +++ trunk/README Thu Sep 12 01:34:57 2013 (r1734) @@ -105,20 +105,24 @@ djcrx-2.04pre_20090725-13ap.i386.rpm The cross toolchain packages for your distribution may have slightly different names (look for packages named *djgpp*). - Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch - Download and compile http://assembler.cz/flashrom/libgetopt/ + + You will need the following library source trees containing their compiled + static libraries either in the parent directory of the flashrom source or + specify the base folder on compile time with the DOSLIBS_BASE parameter. + The default as described above is equal to calling + 'make djgpp-dos DOSLIBS_BASE=..' + + To get and build said libraries... + Download pciutils 3.1.5 and apply http://flashrom.org/File:Pciutils.patch.gz Compile pciutils, see README.DJGPP for instructions. + Download and compile http://flashrom.org/File:Libgetopt.tar.gz Enter the flashrom directory. - ../libpci should contain pciutils source and binaries. - ../libgetopt should contain getopt.a from libgetopt. Run either (change settings where appropriate) make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip or (above settings hardcoded) make djgpp-dos - You might have to add WARNERROR=no to the make command line. - To run flashrom.exe, download and unpack - http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure - CWSDPMI.EXE is in the current directory. + To run flashrom.exe, download http://flashrom.org/File:Csdpmi7b.zip and + unpack CWSDPMI.EXE into the current directory or one in PATH. To cross-compile on Linux for Windows:

1 0

Supermicro server BIOS update question
by Ben Schwartz 12 Sep '13

12 Sep '13

Hello! I came across your page today in search of an easy way to update BIOS on ~800 Supermicro servers around the world at different datacenters. I have used the asulnx tool in the past for another board but it doesn't seem to work for these. I saw in your supported hardware page that the Supermicro X8SIE-F and X9SCM-F boards are not supported under flashrom utility because: 113. ↑<http://www.flashrom.org/Supported_hardware#boards_ref113> Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)." What exactly does this reason mean and do you know of another BIOS update utility that will work for these motherboards that can be run from Linux (centos5-6)? Thanks! -Ben

1 0

Re: [flashrom] BCOM WinNET P680 patch
by Stefan Tauner 10 Sep '13

10 Sep '13

On Sun, 8 Sep 2013 22:39:11 -0400 Corey Osgood <corey.osgood(a)gmail.com> wrote: > > On Sun, Sep 8, 2013 at 10:24 PM, Corey Osgood <corey.osgood(a)gmail.com>wrote: > > > >> This patch replaces Alex Mauer's previous patch for this board. Tested to > >> read, erase, and write on 2 different boards, both with AMIC A29040BL flash > >> chips, using both stock BIOS and coreboot images. Patch marks the AMIC chip > >> as tested at the same time. > >> > >> Signed-off-by: Corey Osgood <corey.osgood(a)gmail.com> Thanks Corey! I was not aware of that patch from 2008(!). Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> and committed in r1733 after some minor changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1733 - trunk
by repository service 10 Sep '13

10 Sep '13

Author: stefanct Date: Tue Sep 10 12:42:48 2013 New Revision: 1733 URL: http://flashrom.org/trac/flashrom/changeset/1733 Log: Add board enable for Bcom WinNET P680. This patch replaces Alex Mauer's previous patch for this board (from 2008). Tested to read, erase, and write on 2 different boards, both with AMIC A29040BL flash chips, using both stock BIOS and coreboot images. This patch marks the AMIC chip as tested at the same time. Signed-off-by: Corey Osgood <corey.osgood(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/flashchips.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sat Aug 31 00:23:02 2013 (r1732) +++ trunk/board_enable.c Tue Sep 10 12:42:48 2013 (r1733) @@ -2378,6 +2378,7 @@ {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2443, 0x1043, 0x8027, 0x8086, 0x1130, 0x1043, 0x8027, "^CUSL2-C", NULL, NULL, P3, "ASUS", "CUSL2-C", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2443, 0x1043, 0x8027, 0x8086, 0x1130, 0x1043, 0x8027, "^TUSL2-C", NULL, NULL, P3, "ASUS", "TUSL2-C", 0, NT, intel_ich_gpio21_raise}, + {0x1106, 0x3059, 0x1106, 0x4161, 0x1106, 0x3065, 0x1106, 0x0102, NULL, NULL, NULL, P3, "Bcom/Clientron", "WinNET P680", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3116, 0x1106, 0x3116, "^KM266-8235$", "biostar", "m7viq", P3, "Biostar", "M7VIQ", 0, NT, w83697xx_memw_enable_2e}, {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, P3, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Aug 31 00:23:02 2013 (r1732) +++ trunk/flashchips.c Tue Sep 10 12:42:48 2013 (r1733) @@ -1355,7 +1355,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers =

1 0

[PATCH] squash! BSD refinements.
by Stefan Tauner 10 Sep '13

10 Sep '13

Also, fix date handling in getrevision.sh to work with the various formats for invoking 'date'. This also uses svn's info --xml output instead of the regular one. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- Together with my previous patch I would also like to fix the getrevision script as follows. The commit log and inline comments explain how precisely. util/getrevision.sh | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/util/getrevision.sh b/util/getrevision.sh index c05f59e..5fd83f5 100755 --- a/util/getrevision.sh +++ b/util/getrevision.sh @@ -110,15 +110,31 @@ scm_url() { timestamp() { local t + # date syntaxes are manifold: + # gnu date [-d input]... [+FORMAT] + # netbsd date [-ajnu] [-d date] [-r seconds] [+format] [[[[[[CC]yy]mm]dd]HH]MM[.SS]] + # freebsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] + # dragonflybsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] + # openbsd date [-aju] [-d dst] [-r seconds] [+format] [[[[[[cc]yy]mm]dd]HH]MM[.SS]] [...] if svn_is_file_tracked "$2" ; then if svn_has_local_changes "$2"; then t=$(date -u "$1") else # No local changes, get date of the last log record. - local last_commit_date="$(svn info "$2" | \ - grep '^Last Changed Date:' | \ - awk '{print $4" "$5" "$6}')" - t=$(date -d "${last_commit_date}" -u "$1") + local last_commit_date="$(svn info --xml "$2"| \ + sed -n -e 's/<date>$.*$<\/date>/\1/p' -e 's/\..*Z/Z/p')" + + case $(uname) in + # Most BSD dates do not support parsing date values from user input with -d but all of + # them support parsing the syntax with [[[[[[cc]yy]mm]dd]HH]MM[.ss]]. We have to + # transform the ISO8601 date first though. + NetBSD|OpenBSD|DragonFly|FreeBSD) + last_commit_date="$(echo ${last_commit_date} | \ + sed -n -e 's/$....$-$..$-$..$T$..$:$..$:$..$Z/\1\2\3\4\5\.\6/p')" + t=$(date -u -j "${last_commit_date}" "$1" 2>/dev/null);; + *) + t=$(date -u -d "${last_commit_date}" "$1" 2>/dev/null);; + esac fi elif git_is_file_tracked "$2" ; then # are there local changes? @@ -126,12 +142,22 @@ timestamp() { t=$(date -u "${1}") else # No local changes, get date of the last commit - t=$(date -d "$(git log --pretty=format:"%cD" -1 -- "$2")" -u "$1") + case $(uname) in + # Most BSD dates do not support parsing date values from user input with -d but all of + # them support parsing epoch seconds with -r. Thanks to git we can easily use that: + NetBSD|OpenBSD|DragonFly|FreeBSD) + t=$(date -u -r "$(git log --pretty=format:%ct -1 -- $2)" "$1" 2>/dev/null);; + *) + t=$(date -d "$(git log --pretty=format:%cD -1 -- $2)" -u "$1" 2>/dev/null);; + esac fi else t=$(date -u "$1") fi + if [ -z "$t" ]; then + echo "Warning: Could not determine timestamp." 2>/dev/null + fi echo "${t}" } -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] [PATCH 2/6] sbxxx: Set SPI clock to 16.5 MHz and disable fast reads.
by Carl-Daniel U. Hailfinger 10 Sep '13

10 Sep '13

[Sorry for breaking the threading. This is a reply to http://patchwork.coreboot.org/patch/4011/ ] Stefan Tauner wrote on 2013-08-14 17:44:19 > > On Wed, 14 Aug 2013 08:56:27 +0200 > Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> wrote: > > > Am 10.08.2013 03:45 schrieb Stefan Tauner: > > > diff --git a/sb600spi.c b/sb600spi.c > > > index c9be44c..2c1d400 100644 > > > --- a/sb600spi.c > > > +++ b/sb600spi.c > > > @@ -272,6 +272,61 @@ static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, > > > return 0; > > > } > > > > > > +struct spispeed { > > > + const char *const name; > > > + const int8_t speed; > > > +}; > > > + > > > +static const struct spispeed spispeeds[] = { > > > + { "66 MHz", 0x00 }, > > > + { "33 MHz", 0x01 }, > > > + { "22 MHz", 0x02 }, > > > + { "16.5 MHz", 0x03 }, > > > +}; > > > I see struct spispeed and think it is a somewhat odd construct. The > > speed member is just the array index stored in the corresponding array > > member. Do you envision speed values which are not an array index? > > I want to merge the various frequency setting functions eventually and > Dediprog for example uses non-linear values. Hence I'd rather use this > unnecessary scheme for easier refactoring later. OK. > > > +static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) > > > +{ > > > + bool success = false; > > > + uint8_t speed = spispeed->speed; > > > + > > > + msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); > > > + if (amd_gen != CHIPSET_YANGTZE) { > > > + rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); > > > + success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); > > > The code reads spispeed and then sets 16 MHz regardless of whether it's > > already 16 MHz. I also seem to remember that you were opposed to setting > > this speed permanently and advocated to restore it on shutdown. > > This should not be done unconditionally, right, I will change this. > But it is done (like the (un)setting of fast speed also) with the > r*-mmio functions so it should be reverted on shutdown AFAIK? Indeed, I overlooked the r* prefix. Given that a repost of part 1 of this series would be nice, I'll go out on a limb and ask you to repost this one after the changes as well. With the change you mentioned, this is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel

1 0

Re: [flashrom] [PATCH 1/6] sbxxx: Add detection for the remaining AMD chipset families.
by Carl-Daniel U. Hailfinger 10 Sep '13

10 Sep '13

[Sorry for breaking the threading. This is meant to be a reply to http://patchwork.coreboot.org/patch/4016/ ] Stefan Tauner wrote on 2013-08-14 17:35:13 > > On Wed, 14 Aug 2013 08:42:15 +0200 > Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> wrote: > > > Am 10.08.2013 03:45 schrieb Stefan Tauner: > > > Also, correct prettyprinting of the registers of the various families, > > > and abort if SpiAccessMacRomEn or SpiHostAccessRomEn prohibit full access. > > > > > > Tested reading/writing on ASRock IMB-A180, and chipset detection on > > > one of each affected generation by Chris Goodrich from Sage. > > > > > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > > --- > > > sb600spi.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++------------- > > > 1 file changed, 106 insertions(+), 27 deletions(-) > > > > > > diff --git a/sb600spi.c b/sb600spi.c > > > index cb7c4ac..c9be44c 100644 > > > --- a/sb600spi.c > > > +++ b/sb600spi.c > > > @@ -57,7 +57,28 @@ static enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN; > > > static void determine_generation(struct pci_dev *dev) > > > { > > > amd_gen = CHIPSET_AMD_UNKNOWN; > > > - if (dev->device_id == 0x780e) { > > > + msg_pdbg2("Trying to determine the generation of the SPI interface... "); > > > + if (dev->device_id == 0x438d) { > > > + amd_gen = CHIPSET_SB6XX; > > > + msg_pdbg("SB6xx detected.\n"); > > > + } else if (dev->device_id == 0x439d) { > > > + struct pci_dev *smbus_dev = pci_dev_find(0x1002, 0x4385); > > > > Why do we search twice for this SMBus device, once inside > > sb600_probe_spi and once here? Can't we just pass the smbus device as > > second parameter to determine_generation? > > Yes we could and I thought about this too but came to the conclusion > that it is not worth it. Do you think otherwise? I'd really like to limit the number of times we search for PCI devices. On some machines with lots of PCI devices that can take a lot of time. That said, I also think such refactoring can be done in a later iteration, and it is also possible to have the generation detection as first command inside the AMD SBx00 SPI probe function, and let it set a static struct *smbus_dev. Your choice when/how to deal with it. Anyway, most/all of the code above was committed in r1706, so this is mostly an after-the-fact review. > > > + if (smbus_dev == NULL) > > > + return; > > > + uint8_t rev = pci_read_byte(smbus_dev, PCI_REVISION_ID); > > > + if (rev >= 0x39 && rev <= 0x3D) { > > > + amd_gen = CHIPSET_SB7XX; > > > + msg_pdbg("SB7xx/SP5100 detected.\n"); > > > + } else if (rev >= 0x40 && rev <= 0x42) { > > > + amd_gen = CHIPSET_SB89XX; > > > + msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); > > > + } else { > > > + msg_pwarn("SB device found but SMBus revision 0x%02x does not match known values.\n" > > > + "Assuming SB8xx/SB9xx/Hudson-1. Please send a log to flashrom(a)flashrom.org\n", > > > + rev); > > > + amd_gen = CHIPSET_SB89XX; > > > > We could error out here as well. The next release is a few weeks away > > anyway. > > No regressions if we can easily avoid them please (I'll break enough > stuff unintentionally, rest assured :) > It is fairly safe to assume that the code path for sb89xx/hudson will > work on such devices if they exist, maybe with some wrong prints if it > is sb7xx but nothing we worried about until I provided a solution for > it in most cases :) I'm not convinced that this would likely introduce a regression. For all we know, AMD might use higher SMBus device PCI revision IDs for respins of older chipsets, and there we really want to error out instead of having flashrom deal with bogus errors. > > > + } > > > + } else if (dev->device_id == 0x780e) { > > > /* The PCI ID of the LPC bridge doesn't change between Hudson-2/3/4 and Yangtze (Kabini/Temash) > > > * although they use different SPI interfaces. */ > > > #ifdef USE_YANGTZE_HEURISTICS > > > @@ -94,7 +115,11 @@ static void determine_generation(struct pci_dev *dev) > > > "the output of lspci -nnvx, thanks!.\n", rev); > > > } > > > #endif > > > - } > > > + } else > > > + msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 ".\n" > > > + "Please report this to flashrom(a)flashrom.org and include this log and\n" > > > + "the output of lspci -nnvx, thanks!\n", > > > + __func__, dev->vendor_id, dev->device_id); > > > } > > > > > > static void reset_internal_fifo_pointer(void) > > > @@ -250,7 +275,7 @@ static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, > > > static int sb600_handle_imc(struct pci_dev *dev, bool amd_imc_force) > > > { > > > /* Handle IMC everywhere but sb600 which does not have one. */ > > > - if (dev->device_id == 0x438d) > > > + if (amd_gen == CHIPSET_SB6XX) > > > return 0; > > > > > > /* TODO: we should not only look at IntegratedImcPresent (LPC Dev 20, Func 3, 40h) but also at > > > @@ -334,6 +359,12 @@ int sb600_probe_spi(struct pci_dev *dev) > > > sb600_spibar += tmp & 0xfff; > > > > > > determine_generation(dev); > > > + if (amd_gen == CHIPSET_AMD_UNKNOWN) { > > > + /* FIXME: Eventually this should be a fatal error, but until we are certain to have covered all > > > + * IDs actually found in the wild, try to mimmick the previous behavior. */ > > > > Given that we're now post-0.9.7, we can make this a fatal error. > > Besides that, the current patch doesn't even set CHIPSET_AMD_UNKNOWN for > > some combinations with unknown SMBus PCI revision ID. > > Sure, this was targeted to be in 0.9.7 (and see above). > > > > + msg_pwarn("Could not determine chipset generation. Assuming SB6xx."); > > > + amd_gen = CHIPSET_SB6XX; > > > + } > > > > > > if (amd_gen == CHIPSET_YANGTZE) { > > > msg_perr("SPI on Kabini/Temash and newer chipsets are not yet supported.\n" > > > @@ -341,35 +372,83 @@ int sb600_probe_spi(struct pci_dev *dev) > > > return ERROR_NONFATAL; > > > } > > > > > > - tmp = pci_read_long(dev, 0xa0); > > > - msg_pdbg("AltSpiCSEnable=%i, SpiRomEnable=%i, " > > > - "AbortEnable=%i\n", tmp & 0x1, (tmp & 0x2) >> 1, > > > - (tmp & 0x4) >> 2); > > > - tmp = (pci_read_byte(dev, 0xba) & 0x4) >> 2; > > > - msg_pdbg("PrefetchEnSPIFromIMC=%i, ", tmp); > > > - > > > - tmp = pci_read_byte(dev, 0xbb); > > > - /* FIXME: Set bit 3,6,7 if not already set. > > > - * Set bit 5, otherwise SPI accesses are pointless in LPC mode. > > > - * See doc 42413 AMD SB700/710/750 RPR. > > > + /* Chipset support matrix for SPI Base_Addr (LPC PCI reg 0xa0) > > > + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze > > > + * 3 rsvd <- <- ? <- ? RouteTpm2Spi > > > + * 2 rsvd AbortEnable rsvd ? <- ? <- > > > + * 1 rsvd SpiRomEnable <- ? <- ? <- > > > + * 0 rsvd AltSpiCSEnable<1> rsvd ? <- ? <- > > > > Maybe it's just me, but I have trouble parsing that table. Let's talk > > about bit 2: What you mean is clear for 6xx (rsvd), 7xx (abortenable), > > 8xx (abortenable). I'm assuming that this bit is not described for 9xx > > and hudson1, but why is the hudson2+ entry "?" instead of "<-" ? Or do > > the "?" entries for 9xx and hudson2+ have a different meaning? > > Actually it is the <- that changes meaning, if you will, and the ? are > not just "we dont know", as one obviously would to infer. > The ? marks values where we do not have a datasheet, but which we > assume to be identical to the previous generations. So maybe we should > use "<-?" instead? Other suggestions are very welcomed. > Now it should also be clear what the <- after a ? means: we have a > datasheet and it indicates the same values as the generation *before* > the question marks before it. I used this mainly for myself but I would > still like to include it in some form. Let me try to phrase this in a way I can understand: +++++++++++++ How to read this table: "nd" means we have no datasheet for this chipset generation. "ni" means the datasheet for this generation doesn't have any relevant info. "<-" means the bit/register meaning is identical to the next non-ni/non-nd chipset to the left. If a "nd" chipset is between two chipsets with identical meaning, we assume the meaning didn't change twice in between, i.e. the meaning is unchanged for the "nd" chipset. This is a tried and (so far) valid assumption. +++++++++++++ Your "?" would turn into "nd". That said, keeping your symbols is also an option. My phrasing for that scenario would be: +++++++++++++ How to read this table: "?" means we have no datasheet for this chipset generation or the datasheet doesn't have any relevant info. "<-" means the bit/register meaning is identical to the next non-"?" chipset to the left. "<-" thus never refers to a "?". If a "?" chipset is between two chipsets with identical meaning, we assume the meaning didn't change twice in between, i.e. the meaning is unchanged for the "?" chipset. This is a tried and (so far) valid assumption. +++++++++++++ > > > + * > > > + * <1> It is unknown if that was ever working. On later chipsets the CS config is at memmapped 0x1D. > > > > Heh. Let's find someone with DualBIOS on a SB7xx board. But seriously, > > I'd assume this works if it's still in the current revision of the > > register reference guide. > > The problem is (IIRC) that it is not too well defined (who would have > thought that!) but maybe I am confusing it with Fast Speed. AFAICS the meaning is well defined, except that vendors apparently didn't use it on the boards we know. A simple test would be to set that bit and check if SPI probe still returns anything. If yes, there are either two flash chips or my understanding of that bit is wrong. > > > */ > > > - msg_pdbg("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n", > > > - tmp & 0x1, (tmp & 0x20) >> 5); > > > - tmp = mmio_readl(sb600_spibar); > > > - /* FIXME: If SpiAccessMacRomEn or SpiHostAccessRomEn are zero on > > > - * SB700 or later, reads and writes will be corrupted. Abort in this > > > - * case. Make sure to avoid this check on SB600. > > > + if (amd_gen >= CHIPSET_SB7XX) { > > > + tmp = pci_read_long(dev, 0xa0); > > > + msg_pdbg("SpiRomEnable=%i", (tmp >> 1) & 0x1); > > > + if (amd_gen == CHIPSET_SB7XX) > > > + msg_pdbg(", AltSpiCSEnable=%i, AbortEnable=%i", tmp & 0x1, (tmp >> 2) & 0x1); > > > + > > > + tmp = pci_read_byte(dev, 0xba); > > > + msg_pdbg(", PrefetchEnSPIFromIMC=%i", (tmp & 0x4) >> 2); > > > + > > > + tmp = pci_read_byte(dev, 0xbb); > > > + /* FIXME: Set bit 3,6,7 if not already set. > > > + * Set bit 5, otherwise SPI accesses are pointless in LPC mode. > > > + * See doc 42413 AMD SB700/710/750 RPR. > > > > Are these bits required to be set even for post-SB7000 chipsets? > > That's left as an exercise to the reader. :P > 5 is reserved anywhere but on sb7x/sp5100, the other bits change > semantics in sb8xx... > > > > + */ > > > + if (amd_gen == CHIPSET_SB7XX) > > > + msg_pdbg(", SpiOpEnInLpcMode=%i", (tmp >> 5) & 0x1); > > > + msg_pdbg(", PrefetchEnSPIFromHost=%i\n", tmp & 0x1); > > > + } > > > + > > > + /* Chipset support matrix for SPI_Cntrl0 (spibar + 0x0) > > > + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze > > > + * 17 rsvd <- <- ? <- ? <- > > > > Again the table I don't understand. Maybe you should add an explanation > > which specifies the meaning of "?". > > Given the explanation above, would you mind formulating it? IMHO it > improves such things quite a bit if another mind puts it into words > than the one inventing it. Done, see above. > > > + * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0]<1> > > > + * 19 SpiArbEnable <- <- ? <- ? <- > > > + * 20 (FifoPtrClr) <- <- ? <- ? <- > > > + * 21 (FifoPtrInc) <- <- ? <- ? IllegalAccess > > > + * 22 SpiAccessMacRomEn <- <- ? <- ? <- > > > + * 23 SpiHostAccessRomEn <- <- ? <- ? <- > > > + * 24:26 ArbWaitCount <- <- ? <- ? <- > > > + * 27 SpiBridgeDisable <- <- ? <- ? rsvd > > > + * 28 rsvd DropOneClkOnRd = SPIClkGate ? <- ? <- > > > + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1]<1> > > > + * 31 rsvd <- SpiBusy ? <- ? <- > > > + * > > > + * <1> see handle_speed > > > > Which handle_speed? Can't find it in svn HEAD nor in this patch. > > Added later in the patch set. Do you really want me to change those > lines again in the followup patch? It would have made review easier. > I had the impression you hate that :) Yes and no. While I try to avoid changing a line multiple times in a patchset, I also try to keep each patch self-contained. > > > */ > > > - msg_pdbg("(0x%08" PRIx32 ") fastReadEnable=%u, SpiArbEnable=%i, SpiAccessMacRomEn=%i, " > > > - "SpiHostAccessRomEn=%i, ArbWaitCount=%i, " > > > - "SpiBridgeDisable=%i, DropOneClkOnRd=%i\n", > > > - tmp, (tmp >> 18) & 0x1, > > > - (tmp >> 19) & 0x1, (tmp >> 22) & 0x1, > > > - (tmp >> 23) & 0x1, (tmp >> 24) & 0x7, > > > - (tmp >> 27) & 0x1, (tmp >> 28) & 0x1); > > > + tmp = mmio_readl(sb600_spibar + 0x00); > > > + msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); > > > + > > > + msg_pdbg(", SpiAccessMacRomEn=%i, SpiHostAccessRomEn=%i, ArbWaitCount=%i", > > > + (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7); > > > + > > > + if (amd_gen != CHIPSET_YANGTZE) > > > + msg_pdbg(", SpiBridgeDisable=%i", (tmp >> 27) & 0x1); > > > + > > > + switch (amd_gen) { > > > + case CHIPSET_SB7XX: > > > + msg_pdbg(", DropOneClkOnRd/SpiClkGate=%i", (tmp >> 28) & 0x1); > > > > Should we check that bit and set it to 0? I haven't yet been able to > > find a good explanation of what it does, but it seems to be a trick to > > allow normal read commands at higher speed. I could be mistaken, though. > > I would refrain from changing it if we don't really know what it does > (and we probably will never do so...). I have read the description a > few times... and it does not make a lot of sense to me. Maybe our friends at AMD/Sage can explain this? > > > + case CHIPSET_SB89XX: > > > + case CHIPSET_HUDSON234: > > > + msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1); > > > + default: break; > > > + } > > > + msg_pdbg("\n"); > > > + > > > + if (((tmp >> 22) & 0x1) == 0 || ((tmp >> 23) & 0x1) == 0) { > > > + msg_perr("ERROR: State of SpiAccessMacRomEn or SpiHostAccessRomEn prohibits full access.\n"); > > > + return ERROR_NONFATAL; > > > + } > > > + > > > tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; > > > msg_pdbg("NormSpeed is %s MHz\n", speed_names[tmp]); > > > > AFAICS this speed handling stuff is changing in a later patch, correct? > > Exactly because this is a good breaking point to avoid a monster > patch ;) > > Thanks for the review! Apart from the ? explanation and the fatal > error, I think this can go in soon? Yes, looks fine otherwise. Could you please forward-port this patch and repost it? I just want to make sure I didn't overlook anything serious. Otherwise, this is (with the ? explanation and the fatal error) Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel

1 0

Re: [flashrom] BCOM WinNET P680 patch
by Corey Osgood 09 Sep '13

09 Sep '13

It's one of those days, I guess. This is the correct version of the patch. On Sun, Sep 8, 2013 at 10:32 PM, Corey Osgood <corey.osgood(a)gmail.com>wrote: > And here's the patch! > > > On Sun, Sep 8, 2013 at 10:24 PM, Corey Osgood <corey.osgood(a)gmail.com>wrote: > >> This patch replaces Alex Mauer's previous patch for this board. Tested to >> read, erase, and write on 2 different boards, both with AMIC A29040BL flash >> chips, using both stock BIOS and coreboot images. Patch marks the AMIC chip >> as tested at the same time. >> >> Signed-off-by: Corey Osgood <corey.osgood(a)gmail.com> >> > >

1 0

Re: [flashrom] BCOM WinNET P680 patch
by Corey Osgood 09 Sep '13

09 Sep '13

And here's the patch! On Sun, Sep 8, 2013 at 10:24 PM, Corey Osgood <corey.osgood(a)gmail.com>wrote: > This patch replaces Alex Mauer's previous patch for this board. Tested to > read, erase, and write on 2 different boards, both with AMIC A29040BL flash > chips, using both stock BIOS and coreboot images. Patch marks the AMIC chip > as tested at the same time. > > Signed-off-by: Corey Osgood <corey.osgood(a)gmail.com> >

1 0

BCOM WinNET P680 patch
by Corey Osgood 09 Sep '13

09 Sep '13

This patch replaces Alex Mauer's previous patch for this board. Tested to read, erase, and write on 2 different boards, both with AMIC A29040BL flash chips, using both stock BIOS and coreboot images. Patch marks the AMIC chip as tested at the same time. Signed-off-by: Corey Osgood <corey.osgood(a)gmail.com>

1 0

Raspberry Pi Pm25LD010 output files
by Vasile Ceteras 07 Sep '13

07 Sep '13

A million thanks for this awesome tool, it worked like a charm! Vasile

1 0

[PATCH] DOS refinements.
by Stefan Tauner 06 Sep '13

06 Sep '13

This allows to use the DOS library trees stored in a user-specified directory. I have mirrored the needed patches, sources and binaries (the latter are properly licensed to allow that) in the flashrom wiki, so use those URLs instead of the original sources. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- Makefile | 12 +++++++----- README | 20 ++++++++++++-------- 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/Makefile b/Makefile index de3cf97..29b5f1e 100644 --- a/Makefile +++ b/Makefile @@ -39,6 +39,7 @@ CFLAGS ?= -Os -Wall -Wshadow EXPORTDIR ?= . AR ?= ar RANLIB ?= ranlib +DOSLIBS_BASE ?= .. # The following parameter changes the default programmer that will be used if there is no -p/--programmer # argument given when running flashrom. The predefined setting does not enable any default so that every # user has to declare the programmer he wants to use on every run. The rationale for this to be not set @@ -109,11 +110,12 @@ endif ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe -CPPFLAGS += -I../libgetopt +CPPFLAGS += -I$(DOSLIBS_BASE)/libgetopt # DJGPP has odd uint*_t definitions which cause lots of format string warnings. CFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt -LIBS += ../libgetopt/libgetopt.a +LIBS += -lgetopt +LDFLAGS += -L$(DOSLIBS_BASE)/libgetopt/ # Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes @@ -621,9 +623,9 @@ PCILIBS += -lpciutils -lpci PCILIBS += -l$(shell uname -p) else ifeq ($(TARGET_OS), DOS) -# FIXME There needs to be a better way to do this -CPPFLAGS += -I../libpci/include -PCILIBS += ../libpci/lib/libpci.a +CPPFLAGS += -I$(DOSLIBS_BASE)/libpci/include +LDFLAGS += -L$(DOSLIBS_BASE)/libpci/lib/ +PCILIBS += -lpci else PCILIBS += -lpci ifeq ($(TARGET_OS), OpenBSD) diff --git a/README b/README index 2441089..ba7e295 100644 --- a/README +++ b/README @@ -103,20 +103,24 @@ To cross-compile on Linux for DOS: djcrx-2.04pre_20090725-13ap.i386.rpm The cross toolchain packages for your distribution may have slightly different names (look for packages named *djgpp*). - Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch - Download and compile http://assembler.cz/flashrom/libgetopt/ + + You will need the following library source trees containing their compiled + static libraries either in the parent directory of the flashrom source or + specify the base folder on compile time with the DOSLIBS_BASE parameter. + The default as described above is equal to calling + 'make djgpp-dos DOSLIBS_BASE=..' + + To get and build said libraries... + Download pciutils 3.1.5 and apply http://flashrom.org/File:Pciutils.patch.gz Compile pciutils, see README.DJGPP for instructions. + Download and compile http://flashrom.org/File:Libgetopt.tar.gz Enter the flashrom directory. - ../libpci should contain pciutils source and binaries. - ../libgetopt should contain getopt.a from libgetopt. Run either (change settings where appropriate) make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip or (above settings hardcoded) make djgpp-dos - You might have to add WARNERROR=no to the make command line. - To run flashrom.exe, download and unpack - http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure - CWSDPMI.EXE is in the current directory. + To run flashrom.exe, download and unpack http://flashrom.org/File:Csdpmi7b.zip + and make sure CWSDPMI.EXE is in the current directory. To cross-compile on Linux for Windows: -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] Support for intel card eeproms
by Stefan Tauner 05 Sep '13

05 Sep '13

On Wed, 4 Sep 2013 18:47:19 +0200 Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> wrote: > Hello > > We are building a set of cameras with intel 82580 Gigabit chipset. > > Instead of using the intel eeupdate tool to init the card and the mac I > plan to use flashrom. > > The eeprom is accessed with something similar to spi, but AFAIK it does not > follow the jedec standard. > > To probe it, there are some bits on the network card that I can use, that > will tell me if the chip is there and the size. > > I havent digged too much into the code, but I believe that I have to make a > new chip and a new programmer. > > Before starting the work I would like to know if there is something similar > on flashrom that I can use as a example, and if you are interested on such > a patch. There is 0 code for EEPROMs in flashrom yet and we do not plan to work actively on supporting them, but for your approach adding two files, one for the programmer and one for the chip might be a good start :) In the past support for single chips or chip families converged into files with generic functions that support a wide range of different manufacturers, so there is probably no exact template for what you need to do regarding the chip, but that shouldnt be a big issue, just implement the needed functions in a new file, hook it up in chipdrivers.h and add a new entry to flashchips.c. The programmer code will be harder to get right without understanding flashrom's architecture, but maybe you can use Carl-Daniel's script or at least be inspired by it: http://patchwork.coreboot.org/patch/3836/ Alternatively you could take one of the two existing intel nic drivers and just change it where needed. That would not lead to a mergeable patch but might be easier for you (OTOH you would miss to see some implementation details of a new programmer that are under the hood, for example where it needs to be hooked up). I am not sure if we would merge an EEPROM driver anyway, so getting something that works for you should be priority. There might be pre-existing alternatives for what you want... the Intel cards are very widespread and eeupdate is a PITA AFAIK, but I have never looked for a linux application to replace eeupdate... HTH for now. I am looking forward to see any results. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Support for intel card eeproms
by Ricardo Ribalda Delgado 04 Sep '13

04 Sep '13

Hello We are building a set of cameras with intel 82580 Gigabit chipset. Instead of using the intel eeupdate tool to init the card and the mac I plan to use flashrom. The eeprom is accessed with something similar to spi, but AFAIK it does not follow the jedec standard. To probe it, there are some bits on the network card that I can use, that will tell me if the chip is there and the size. I havent digged too much into the code, but I believe that I have to make a new chip and a new programmer. Before starting the work I would like to know if there is something similar on flashrom that I can use as a example, and if you are interested on such a patch. Thanks! -- Ricardo Ribalda

1 0

Emergency: ASUSTeK P8Z77-V 2003 write
by dpcimanager＠users.sourceforge.net 04 Sep '13

04 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/19/rm7n6dhx1rnd8h4twlnnycgh0000gp/T/DPCIQJXQ4B.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 497M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1102 us, 10000 myus = 9937 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8Z77-V" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x2a: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on Z77 failed. New value is 0x2a. Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0180 FREG1: BIOS region (0x00180000-0x007fffff) is read-write. 0x5C: 0x017f0003 FREG2: Management Engine region (0x00003000-0x0017ffff) is read-write. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x03040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 4 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0180 FLREG2 0x017f0003 FLREG3 0x00020001 FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x007fffff Region 2 (ME ) 0x00003000 - 0x0017ffff Region 3 (GbE ) 0x00001000 - 0x00002fff Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x50, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:EW, 0x002000-0x002fff:E, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:EW, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:EW, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:EW, 0x00d000-0x00dfff:E, 0x00e000-0x00efff:EW, 0x00f000-0x00ffff:E, 0x010000-0x010fff:E, 0x011000-0x011fff:E, 0x012000-0x012fff:EW, 0x013000-0x013fff:E, 0x014000-0x014fff:E, 0x015000-0x015fff:E, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:EW, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=1 Running OPCODE 0x20 failed at address 0x180000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:S, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S, 0x020000-0x027fff:S, 0x028000-0x02ffff:S, 0x030000-0x037fff:S, 0x038000-0x03ffff:S, 0x040000-0x047fff:S, 0x048000-0x04ffff:S, 0x050000-0x057fff:S, 0x058000-0x05ffff:S, 0x060000-0x067fff:S, 0x068000-0x06ffff:S, 0x070000-0x077fff:S, 0x078000-0x07ffff:S, 0x080000-0x087fff:S, 0x088000-0x08ffff:S, 0x090000-0x097fff:S, 0x098000-0x09ffff:S, 0x0a0000-0x0a7fff:S, 0x0a8000-0x0affff:S, 0x0b0000-0x0b7fff:S, 0x0b8000-0x0bffff:S, 0x0c0000-0x0c7fff:S, 0x0c8000-0x0cffff:S, 0x0d0000-0x0d7fff:S, 0x0d8000-0x0dffff:S, 0x0e0000-0x0e7fff:S, 0x0e8000-0x0effff:S, 0x0f0000-0x0f7fff:S, 0x0f8000-0x0fffff:S, 0x100000-0x107fff:S, 0x108000-0x10ffff:S, 0x110000-0x117fff:S, 0x118000-0x11ffff:S, 0x120000-0x127fff:S, 0x128000-0x12ffff:S, 0x130000-0x137fff:S, 0x138000-0x13ffff:S, 0x140000-0x147fff:S, 0x148000-0x14ffff:S, 0x150000-0x157fff:S, 0x158000-0x15ffff:S, 0x160000-0x167fff:S, 0x168000-0x16ffff:S, 0x170000-0x177fff:S, 0x178000-0x17ffff:S, 0x180000-0x187fff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_52 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_d8 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! Restoring MMIO space at 0x10404f8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

[PATCH] BSD refinements.
by Stefan Tauner 03 Sep '13

03 Sep '13

Make it easier to compile flashrom under NetBSD and DragonFlyBSD: - Use /usr/pkg/ as prefix for includes and linking - Use pciutils as include path for the right(tm) libpci Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- While using the pkgsrc prefix is not exactly pretty, we do similar things for OSX, FreeBSD and OpenBSD already with the difference that we use /usr/local/ there. IMHO we should support the most plausible configuration on default and that's libraries installed with pkg_src in its default path in the cases of NetBSD and DragonFlyBSD AFAICS. The FLAGs can still be overridden via the command line too. Tested on NetBSD 6.1 and DragonFlyBSD 3.4.2 VMs. Makefile | 14 ++++++++++++++ README | 6 ++---- hwaccess.h | 6 ++++++ 3 files changed, 22 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index 70ef640..de3cf97 100644 --- a/Makefile +++ b/Makefile @@ -97,6 +97,16 @@ CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif +ifeq ($(TARGET_OS), NetBSD) +CPPFLAGS += -I/usr/pkg/include +LDFLAGS += -L/usr/pkg/lib +endif + +ifeq ($(TARGET_OS), DragonFlyBSD) +CPPFLAGS += -I/usr/pkg/include +LDFLAGS += -L/usr/pkg/lib +endif + ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe CPPFLAGS += -I../libgetopt @@ -716,7 +726,11 @@ compiler: featuresavailable define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ #define index shadow_workaround_index +#if !defined __NetBSD__ && !defined __DragonFly__ #include <pci/pci.h> +#else +#include <pciutils/pci.h> +#endif struct pci_access *pacc; int main(int argc, char **argv) { diff --git a/README b/README index 7f24cca..2441089 100644 --- a/README +++ b/README @@ -80,11 +80,9 @@ To compile on Solaris, use: gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 -To compile on NetBSD or DragonFly BSD, use: +To compile on NetBSD or DragonFly BSD (with pciutils, libftdi, libusb installed in /usr/pkg/), use: - ln -s /usr/pkg/include/pciutils pci - gmake CPPFLAGS="-I. -I/usr/pkg/include" \ - LDFLAGS="-L/usr/pkg/lib -Wl,-rpath-link,/usr/pkg/lib" + gmake To compile on OpenBSD, use: diff --git a/hwaccess.h b/hwaccess.h index fd6eb12..83f349e 100644 --- a/hwaccess.h +++ b/hwaccess.h @@ -37,7 +37,13 @@ * or as builtin. */ #define index shadow_workaround_index + +#if !defined (__NetBSD__) && !defined (__DragonFly__) #include <pci/pci.h> +#else +#include <pciutils/pci.h> +#endif + #undef index #endif -- Kind regards, Stefan Tauner

1 0

Report: Hewlett-Packard 3032h 786G1 v01.24 read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 13.0.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/wg/065qbxgd52d_fdgtrnr6tnxr0000gn/T/DPCIhotLlQ.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 210M loops per second, delay more than 10% too short (got 49% of expected delay), recalculating... 184M loops per second, delay more than 10% too short (got 41% of expected delay), recalculating... 183M loops per second, delay more than 10% too short (got 43% of expected delay), recalculating... 176M loops per second, delay more than 10% too short (got 41% of expected delay), recalculating... 226M loops per second, delay loop is unreliable, trying to continue 10 myus = 5 us, 100 myus = 51 us, 1000 myus = 18377 us, 10000 myus = 9677 us, 4 myus = 2 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq dc7900 Convertible Minitower" DMI string system-version: " " DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "3032h" DMI string baseboard-version: "Not Specified" DMI string chassis-type: "Mini Tower" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 19. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found chipset "Intel ICH10DO" with PCI ID 8086:3a14. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x02: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: Setting Bios Control at 0xdc from 0x02 to 0x03 on ICH10DO failed. New value is 0x02. Root Complex Register Block address = 0xfed1c000 GCS = 0x440464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x9f, read w/o addr, none op[1]: 0x05, read w/o addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x02, write w/ addr, none op[4]: 0x03, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x02, write w/ addr, none op[7]: 0x03, read w/ addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x06 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x0000b000 (FADDR) 0x50: 0x00001a1b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0260 FREG1: BIOS region (0x00260000-0x003fffff) is read-write. 0x5C: 0x025f000b FREG2: Warning: Management Engine region (0x0000b000-0x0025ffff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x000a0003 FREG4: Platform Data region (0x00003000-0x0000afff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x74: 0x83ff03fc PR0: Warning: 0x003fc000-0x003fffff is read-only. 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x000000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0606 (PREOP) 0x96: 0xb6f0 (OPTYPE) 0x98: 0x0220059f (OPMENU) 0x9C: 0x03020103 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00000000 (LVSCC) LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0 0xC8: 0x00002015 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=1, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x04040001 FLMAP1 0x0a100206 FLMAP2 0x00000120 --- Details --- NR (Number of Regions): 5 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x010 ISL (ICH/PCH Strap Length): 10 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x00300003 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 20 MHz Write and Erase Clock Freq.: 20 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0260 FLREG2 0x025f000b FLREG3 0x00020001 FLREG4 0x000a0003 --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00260000 - 0x003fffff Region 2 (ME ) 0x0000b000 - 0x0025ffff Region 3 (GbE ) 0x00001000 - 0x00002fff Region 4 (Platf.) 0x00003000 - 0x0000afff === Master Section === FLMSTR1 0x1a1b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080218 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching disabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Found Atmel flash chip "AT25DF321" (4096 kB, SPI) at physical address 0xffc00000. Chip status register is 0x10. Chip status register: Sector Protection Register Lock (SRPL) is not set Chip status register: Bit 6 is not set Chip status register: Erase/Program Error (EPE) is not set Chip status register: WP# pin (WPP) is not asserted Chip status register: Software Protection Status (SWP): no sectors are protected Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x3e, id2 0xd7, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x3e, id2 0xd7, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x3e, id2 0xd7, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x5c, id2 0xf1, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x3e, id2 0xd7, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x3e, id2 0xd7, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xae, id2 0x9a, id1 is normal flash content, id2 is normal flash content Found Atmel flash chip "AT25DF321" (4096 kB, SPI). Block protection is disabled. Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x00b000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x1016da8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASUSTeK P8Z77-V LK 1103 write
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/ks/0sgjd46n2dx9f7bvkwclsw680000gn/T/DPCIGnVsnm.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 466M loops per second, 10 myus = 11 us, 100 myus = 103 us, 1000 myus = 1013 us, 10000 myus = 10008 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8Z77-V LK" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x2a: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on Z77 failed. New value is 0x2a. Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0180 FREG1: BIOS region (0x00180000-0x007fffff) is read-write. 0x5C: 0x017f0001 FREG2: Management Engine region (0x00001000-0x0017ffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0180 FLREG2 0x017f0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x7e, id2 0x06, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:S, 0x201000-0x201fff:S, 0x202000-0x202fff:S, 0x203000-0x203fff:S, 0x204000-0x204fff:S, 0x205000-0x205fff:S, 0x206000-0x206fff:S, 0x207000-0x207fff:S, 0x208000-0x208fff:S, 0x209000-0x209fff:S, 0x20a000-0x20afff:S, 0x20b000-0x20bfff:S, 0x20c000-0x20cfff:S, 0x20d000-0x20dfff:S, 0x20e000-0x20efff:S, 0x20f000-0x20ffff:S, 0x210000-0x210fff:S, 0x211000-0x211fff:S, 0x212000-0x212fff:S, 0x213000-0x213fff:S, 0x214000-0x214fff:S, 0x215000-0x215fff:S, 0x216000-0x216fff:S, 0x217000-0x217fff:S, 0x218000-0x218fff:S, 0x219000-0x219fff:S, 0x21a000-0x21afff:S, 0x21b000-0x21bfff:S, 0x21c000-0x21cfff:S, 0x21d000-0x21dfff:S, 0x21e000-0x21efff:S, 0x21f000-0x21ffff:S, 0x220000-0x220fff:S, 0x221000-0x221fff:S, 0x222000-0x222fff:S, 0x223000-0x223fff:S, 0x224000-0x224fff:S, 0x225000-0x225fff:S, 0x226000-0x226fff:S, 0x227000-0x227fff:S, 0x228000-0x228fff:S, 0x229000-0x229fff:S, 0x22a000-0x22afff:S, 0x22b000-0x22bfff:S, 0x22c000-0x22cfff:S, 0x22d000-0x22dfff:S, 0x22e000-0x22efff:S, 0x22f000-0x22ffff:S, 0x230000-0x230fff:S, 0x231000-0x231fff:S, 0x232000-0x232fff:S, 0x233000-0x233fff:S, 0x234000-0x234fff:S, 0x235000-0x235fff:S, 0x236000-0x236fff:S, 0x237000-0x237fff:S, 0x238000-0x238fff:S, 0x239000-0x239fff:S, 0x23a000-0x23afff:S, 0x23b000-0x23bfff:S, 0x23c000-0x23cfff:S, 0x23d000-0x23dfff:S, 0x23e000-0x23efff:S, 0x23f000-0x23ffff:S, 0x240000-0x240fff:S, 0x241000-0x241fff:S, 0x242000-0x242fff:S, 0x243000-0x243fff:S, 0x244000-0x244fff:S, 0x245000-0x245fff:S, 0x246000-0x246fff:S, 0x247000-0x247fff:S, 0x248000-0x248fff:S, 0x249000-0x249fff:S, 0x24a000-0x24afff:S, 0x24b000-0x24bfff:S, 0x24c000-0x24cfff:S, 0x24d000-0x24dfff:S, 0x24e000-0x24efff:S, 0x24f000-0x24ffff:S, 0x250000-0x250fff:S, 0x251000-0x251fff:S, 0x252000-0x252fff:S, 0x253000-0x253fff:S, 0x254000-0x254fff:S, 0x255000-0x255fff:S, 0x256000-0x256fff:S, 0x257000-0x257fff:S, 0x258000-0x258fff:S, 0x259000-0x259fff:S, 0x25a000-0x25afff:S, 0x25b000-0x25bfff:S, 0x25c000-0x25cfff:S, 0x25d000-0x25dfff:S, 0x25e000-0x25efff:S, 0x25f000-0x25ffff:S, 0x260000-0x260fff:S, 0x261000-0x261fff:S, 0x262000-0x262fff:S, 0x263000-0x263fff:S, 0x264000-0x264fff:S, 0x265000-0x265fff:S, 0x266000-0x266fff:S, 0x267000-0x267fff:S, 0x268000-0x268fff:S, 0x269000-0x269fff:S, 0x26a000-0x26afff:S, 0x26b000-0x26bfff:S, 0x26c000-0x26cfff:S, 0x26d000-0x26dfff:S, 0x26e000-0x26efff:S, 0x26f000-0x26ffff:S, 0x270000-0x270fff:S, 0x271000-0x271fff:S, 0x272000-0x272fff:S, 0x273000-0x273fff:S, 0x274000-0x274fff:S, 0x275000-0x275fff:S, 0x276000-0x276fff:S, 0x277000-0x277fff:S, 0x278000-0x278fff:S, 0x279000-0x279fff:S, 0x27a000-0x27afff:S, 0x27b000-0x27bfff:S, 0x27c000-0x27cfff:S, 0x27d000-0x27dfff:S, 0x27e000-0x27efff:S, 0x27f000-0x27ffff:S, 0x280000-0x280fff:S, 0x281000-0x281fff:S, 0x282000-0x282fff:S, 0x283000-0x283fff:S, 0x284000-0x284fff:S, 0x285000-0x285fff:S, 0x286000-0x286fff:S, 0x287000-0x287fff:S, 0x288000-0x288fff:S, 0x289000-0x289fff:S, 0x28a000-0x28afff:S, 0x28b000-0x28bfff:S, 0x28c000-0x28cfff:S, 0x28d000-0x28dfff:S, 0x28e000-0x28efff:S, 0x28f000-0x28ffff:S, 0x290000-0x290fff:S, 0x291000-0x291fff:S, 0x292000-0x292fff:S, 0x293000-0x293fff:S, 0x294000-0x294fff:S, 0x295000-0x295fff:S, 0x296000-0x296fff:S, 0x297000-0x297fff:S, 0x298000-0x298fff:S, 0x299000-0x299fff:S, 0x29a000-0x29afff:S, 0x29b000-0x29bfff:S, 0x29c000-0x29cfff:S, 0x29d000-0x29dfff:S, 0x29e000-0x29efff:S, 0x29f000-0x29ffff:S, 0x2a0000-0x2a0fff:S, 0x2a1000-0x2a1fff:S, 0x2a2000-0x2a2fff:S, 0x2a3000-0x2a3fff:S, 0x2a4000-0x2a4fff:S, 0x2a5000-0x2a5fff:S, 0x2a6000-0x2a6fff:S, 0x2a7000-0x2a7fff:S, 0x2a8000-0x2a8fff:S, 0x2a9000-0x2a9fff:S, 0x2aa000-0x2aafff:S, 0x2ab000-0x2abfff:S, 0x2ac000-0x2acfff:S, 0x2ad000-0x2adfff:S, 0x2ae000-0x2aefff:S, 0x2af000-0x2affff:S, 0x2b0000-0x2b0fff:S, 0x2b1000-0x2b1fff:S, 0x2b2000-0x2b2fff:S, 0x2b3000-0x2b3fff:S, 0x2b4000-0x2b4fff:S, 0x2b5000-0x2b5fff:S, 0x2b6000-0x2b6fff:S, 0x2b7000-0x2b7fff:S, 0x2b8000-0x2b8fff:S, 0x2b9000-0x2b9fff:S, 0x2ba000-0x2bafff:S, 0x2bb000-0x2bbfff:S, 0x2bc000-0x2bcfff:S, 0x2bd000-0x2bdfff:S, 0x2be000-0x2befff:S, 0x2bf000-0x2bffff:S, 0x2c0000-0x2c0fff:S, 0x2c1000-0x2c1fff:S, 0x2c2000-0x2c2fff:S, 0x2c3000-0x2c3fff:S, 0x2c4000-0x2c4fff:S, 0x2c5000-0x2c5fff:S, 0x2c6000-0x2c6fff:S, 0x2c7000-0x2c7fff:S, 0x2c8000-0x2c8fff:S, 0x2c9000-0x2c9fff:S, 0x2ca000-0x2cafff:S, 0x2cb000-0x2cbfff:S, 0x2cc000-0x2ccfff:S, 0x2cd000-0x2cdfff:S, 0x2ce000-0x2cefff:S, 0x2cf000-0x2cffff:S, 0x2d0000-0x2d0fff:S, 0x2d1000-0x2d1fff:S, 0x2d2000-0x2d2fff:S, 0x2d3000-0x2d3fff:S, 0x2d4000-0x2d4fff:S, 0x2d5000-0x2d5fff:S, 0x2d6000-0x2d6fff:S, 0x2d7000-0x2d7fff:S, 0x2d8000-0x2d8fff:S, 0x2d9000-0x2d9fff:S, 0x2da000-0x2dafff:S, 0x2db000-0x2dbfff:S, 0x2dc000-0x2dcfff:S, 0x2dd000-0x2ddfff:S, 0x2de000-0x2defff:S, 0x2df000-0x2dffff:S, 0x2e0000-0x2e0fff:S, 0x2e1000-0x2e1fff:S, 0x2e2000-0x2e2fff:S, 0x2e3000-0x2e3fff:S, 0x2e4000-0x2e4fff:S, 0x2e5000-0x2e5fff:S, 0x2e6000-0x2e6fff:S, 0x2e7000-0x2e7fff:S, 0x2e8000-0x2e8fff:S, 0x2e9000-0x2e9fff:S, 0x2ea000-0x2eafff:S, 0x2eb000-0x2ebfff:S, 0x2ec000-0x2ecfff:S, 0x2ed000-0x2edfff:S, 0x2ee000-0x2eefff:S, 0x2ef000-0x2effff:S, 0x2f0000-0x2f0fff:S, 0x2f1000-0x2f1fff:S, 0x2f2000-0x2f2fff:S, 0x2f3000-0x2f3fff:S, 0x2f4000-0x2f4fff:S, 0x2f5000-0x2f5fff:S, 0x2f6000-0x2f6fff:S, 0x2f7000-0x2f7fff:S, 0x2f8000-0x2f8fff:S, 0x2f9000-0x2f9fff:S, 0x2fa000-0x2fafff:S, 0x2fb000-0x2fbfff:S, 0x2fc000-0x2fcfff:S, 0x2fd000-0x2fdfff:S, 0x2fe000-0x2fefff:S, 0x2ff000-0x2fffff:S, 0x300000-0x300fff:S, 0x301000-0x301fff:S, 0x302000-0x302fff:S, 0x303000-0x303fff:S, 0x304000-0x304fff:S, 0x305000-0x305fff:S, 0x306000-0x306fff:S, 0x307000-0x307fff:S, 0x308000-0x308fff:S, 0x309000-0x309fff:S, 0x30a000-0x30afff:S, 0x30b000-0x30bfff:S, 0x30c000-0x30cfff:S, 0x30d000-0x30dfff:S, 0x30e000-0x30efff:S, 0x30f000-0x30ffff:S, 0x310000-0x310fff:S, 0x311000-0x311fff:S, 0x312000-0x312fff:S, 0x313000-0x313fff:S, 0x314000-0x314fff:S, 0x315000-0x315fff:S, 0x316000-0x316fff:S, 0x317000-0x317fff:S, 0x318000-0x318fff:S, 0x319000-0x319fff:S, 0x31a000-0x31afff:S, 0x31b000-0x31bfff:S, 0x31c000-0x31cfff:S, 0x31d000-0x31dfff:S, 0x31e000-0x31efff:S, 0x31f000-0x31ffff:S, 0x320000-0x320fff:S, 0x321000-0x321fff:S, 0x322000-0x322fff:S, 0x323000-0x323fff:S, 0x324000-0x324fff:S, 0x325000-0x325fff:S, 0x326000-0x326fff:S, 0x327000-0x327fff:S, 0x328000-0x328fff:S, 0x329000-0x329fff:S, 0x32a000-0x32afff:S, 0x32b000-0x32bfff:S, 0x32c000-0x32cfff:S, 0x32d000-0x32dfff:S, 0x32e000-0x32efff:S, 0x32f000-0x32ffff:S, 0x330000-0x330fff:S, 0x331000-0x331fff:S, 0x332000-0x332fff:S, 0x333000-0x333fff:S, 0x334000-0x334fff:S, 0x335000-0x335fff:S, 0x336000-0x336fff:S, 0x337000-0x337fff:S, 0x338000-0x338fff:S, 0x339000-0x339fff:S, 0x33a000-0x33afff:S, 0x33b000-0x33bfff:S, 0x33c000-0x33cfff:S, 0x33d000-0x33dfff:S, 0x33e000-0x33efff:S, 0x33f000-0x33ffff:S, 0x340000-0x340fff:S, 0x341000-0x341fff:S, 0x342000-0x342fff:S, 0x343000-0x343fff:S, 0x344000-0x344fff:S, 0x345000-0x345fff:S, 0x346000-0x346fff:S, 0x347000-0x347fff:S, 0x348000-0x348fff:S, 0x349000-0x349fff:S, 0x34a000-0x34afff:S, 0x34b000-0x34bfff:S, 0x34c000-0x34cfff:S, 0x34d000-0x34dfff:S, 0x34e000-0x34efff:S, 0x34f000-0x34ffff:S, 0x350000-0x350fff:S, 0x351000-0x351fff:S, 0x352000-0x352fff:S, 0x353000-0x353fff:S, 0x354000-0x354fff:S, 0x355000-0x355fff:S, 0x356000-0x356fff:S, 0x357000-0x357fff:S, 0x358000-0x358fff:S, 0x359000-0x359fff:S, 0x35a000-0x35afff:S, 0x35b000-0x35bfff:S, 0x35c000-0x35cfff:S, 0x35d000-0x35dfff:S, 0x35e000-0x35efff:S, 0x35f000-0x35ffff:S, 0x360000-0x360fff:S, 0x361000-0x361fff:S, 0x362000-0x362fff:S, 0x363000-0x363fff:S, 0x364000-0x364fff:S, 0x365000-0x365fff:S, 0x366000-0x366fff:S, 0x367000-0x367fff:S, 0x368000-0x368fff:S, 0x369000-0x369fff:S, 0x36a000-0x36afff:S, 0x36b000-0x36bfff:S, 0x36c000-0x36cfff:S, 0x36d000-0x36dfff:S, 0x36e000-0x36efff:S, 0x36f000-0x36ffff:S, 0x370000-0x370fff:S, 0x371000-0x371fff:S, 0x372000-0x372fff:S, 0x373000-0x373fff:S, 0x374000-0x374fff:S, 0x375000-0x375fff:S, 0x376000-0x376fff:S, 0x377000-0x377fff:S, 0x378000-0x378fff:S, 0x379000-0x379fff:S, 0x37a000-0x37afff:S, 0x37b000-0x37bfff:S, 0x37c000-0x37cfff:S, 0x37d000-0x37dfff:S, 0x37e000-0x37efff:S, 0x37f000-0x37ffff:S, 0x380000-0x380fff:S, 0x381000-0x381fff:S, 0x382000-0x382fff:S, 0x383000-0x383fff:S, 0x384000-0x384fff:S, 0x385000-0x385fff:S, 0x386000-0x386fff:S, 0x387000-0x387fff:S, 0x388000-0x388fff:S, 0x389000-0x389fff:S, 0x38a000-0x38afff:S, 0x38b000-0x38bfff:S, 0x38c000-0x38cfff:S, 0x38d000-0x38dfff:S, 0x38e000-0x38efff:S, 0x38f000-0x38ffff:S, 0x390000-0x390fff:S, 0x391000-0x391fff:S, 0x392000-0x392fff:S, 0x393000-0x393fff:S, 0x394000-0x394fff:S, 0x395000-0x395fff:S, 0x396000-0x396fff:S, 0x397000-0x397fff:S, 0x398000-0x398fff:S, 0x399000-0x399fff:S, 0x39a000-0x39afff:S, 0x39b000-0x39bfff:S, 0x39c000-0x39cfff:S, 0x39d000-0x39dfff:S, 0x39e000-0x39efff:S, 0x39f000-0x39ffff:S, 0x3a0000-0x3a0fff:S, 0x3a1000-0x3a1fff:S, 0x3a2000-0x3a2fff:S, 0x3a3000-0x3a3fff:S, 0x3a4000-0x3a4fff:S, 0x3a5000-0x3a5fff:S, 0x3a6000-0x3a6fff:S, 0x3a7000-0x3a7fff:S, 0x3a8000-0x3a8fff:S, 0x3a9000-0x3a9fff:S, 0x3aa000-0x3aafff:S, 0x3ab000-0x3abfff:S, 0x3ac000-0x3acfff:S, 0x3ad000-0x3adfff:S, 0x3ae000-0x3aefff:S, 0x3af000-0x3affff:S, 0x3b0000-0x3b0fff:S, 0x3b1000-0x3b1fff:S, 0x3b2000-0x3b2fff:S, 0x3b3000-0x3b3fff:S, 0x3b4000-0x3b4fff:S, 0x3b5000-0x3b5fff:S, 0x3b6000-0x3b6fff:S, 0x3b7000-0x3b7fff:S, 0x3b8000-0x3b8fff:S, 0x3b9000-0x3b9fff:S, 0x3ba000-0x3bafff:S, 0x3bb000-0x3bbfff:S, 0x3bc000-0x3bcfff:S, 0x3bd000-0x3bdfff:S, 0x3be000-0x3befff:S, 0x3bf000-0x3bffff:S, 0x3c0000-0x3c0fff:S, 0x3c1000-0x3c1fff:S, 0x3c2000-0x3c2fff:S, 0x3c3000-0x3c3fff:S, 0x3c4000-0x3c4fff:S, 0x3c5000-0x3c5fff:S, 0x3c6000-0x3c6fff:S, 0x3c7000-0x3c7fff:S, 0x3c8000-0x3c8fff:S, 0x3c9000-0x3c9fff:S, 0x3ca000-0x3cafff:S, 0x3cb000-0x3cbfff:S, 0x3cc000-0x3ccfff:S, 0x3cd000-0x3cdfff:S, 0x3ce000-0x3cefff:S, 0x3cf000-0x3cffff:S, 0x3d0000-0x3d0fff:S, 0x3d1000-0x3d1fff:S, 0x3d2000-0x3d2fff:S, 0x3d3000-0x3d3fff:S, 0x3d4000-0x3d4fff:S, 0x3d5000-0x3d5fff:S, 0x3d6000-0x3d6fff:S, 0x3d7000-0x3d7fff:S, 0x3d8000-0x3d8fff:S, 0x3d9000-0x3d9fff:S, 0x3da000-0x3dafff:S, 0x3db000-0x3dbfff:S, 0x3dc000-0x3dcfff:S, 0x3dd000-0x3ddfff:S, 0x3de000-0x3defff:S, 0x3df000-0x3dffff:S, 0x3e0000-0x3e0fff:S, 0x3e1000-0x3e1fff:S, 0x3e2000-0x3e2fff:S, 0x3e3000-0x3e3fff:S, 0x3e4000-0x3e4fff:S, 0x3e5000-0x3e5fff:S, 0x3e6000-0x3e6fff:S, 0x3e7000-0x3e7fff:S, 0x3e8000-0x3e8fff:S, 0x3e9000-0x3e9fff:S, 0x3ea000-0x3eafff:S, 0x3eb000-0x3ebfff:S, 0x3ec000-0x3ecfff:S, 0x3ed000-0x3edfff:S, 0x3ee000-0x3eefff:S, 0x3ef000-0x3effff:S, 0x3f0000-0x3f0fff:S, 0x3f1000-0x3f1fff:S, 0x3f2000-0x3f2fff:S, 0x3f3000-0x3f3fff:S, 0x3f4000-0x3f4fff:S, 0x3f5000-0x3f5fff:S, 0x3f6000-0x3f6fff:S, 0x3f7000-0x3f7fff:S, 0x3f8000-0x3f8fff:S, 0x3f9000-0x3f9fff:S, 0x3fa000-0x3fafff:S, 0x3fb000-0x3fbfff:S, 0x3fc000-0x3fcfff:S, 0x3fd000-0x3fdfff:S, 0x3fe000-0x3fefff:S, 0x3ff000-0x3fffff:S, 0x400000-0x400fff:S, 0x401000-0x401fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=1 Running OPCODE 0x20 failed at address 0x401000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x401000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:S, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S, 0x020000-0x027fff:S, 0x028000-0x02ffff:S, 0x030000-0x037fff:S, 0x038000-0x03ffff:S, 0x040000-0x047fff:S, 0x048000-0x04ffff:S, 0x050000-0x057fff:S, 0x058000-0x05ffff:S, 0x060000-0x067fff:S, 0x068000-0x06ffff:S, 0x070000-0x077fff:S, 0x078000-0x07ffff:S, 0x080000-0x087fff:S, 0x088000-0x08ffff:S, 0x090000-0x097fff:S, 0x098000-0x09ffff:S, 0x0a0000-0x0a7fff:S, 0x0a8000-0x0affff:S, 0x0b0000-0x0b7fff:S, 0x0b8000-0x0bffff:S, 0x0c0000-0x0c7fff:S, 0x0c8000-0x0cffff:S, 0x0d0000-0x0d7fff:S, 0x0d8000-0x0dffff:S, 0x0e0000-0x0e7fff:S, 0x0e8000-0x0effff:S, 0x0f0000-0x0f7fff:S, 0x0f8000-0x0fffff:S, 0x100000-0x107fff:S, 0x108000-0x10ffff:S, 0x110000-0x117fff:S, 0x118000-0x11ffff:S, 0x120000-0x127fff:S, 0x128000-0x12ffff:S, 0x130000-0x137fff:S, 0x138000-0x13ffff:S, 0x140000-0x147fff:S, 0x148000-0x14ffff:S, 0x150000-0x157fff:S, 0x158000-0x15ffff:S, 0x160000-0x167fff:S, 0x168000-0x16ffff:S, 0x170000-0x177fff:S, 0x178000-0x17ffff:S, 0x180000-0x187fff:S, 0x188000-0x18ffff:S, 0x190000-0x197fff:S, 0x198000-0x19ffff:S, 0x1a0000-0x1a7fff:S, 0x1a8000-0x1affff:S, 0x1b0000-0x1b7fff:S, 0x1b8000-0x1bffff:S, 0x1c0000-0x1c7fff:S, 0x1c8000-0x1cffff:S, 0x1d0000-0x1d7fff:S, 0x1d8000-0x1dffff:S, 0x1e0000-0x1e7fff:S, 0x1e8000-0x1effff:S, 0x1f0000-0x1f7fff:S, 0x1f8000-0x1fffff:S, 0x200000-0x207fff:S, 0x208000-0x20ffff:S, 0x210000-0x217fff:S, 0x218000-0x21ffff:S, 0x220000-0x227fff:S, 0x228000-0x22ffff:S, 0x230000-0x237fff:S, 0x238000-0x23ffff:S, 0x240000-0x247fff:S, 0x248000-0x24ffff:S, 0x250000-0x257fff:S, 0x258000-0x25ffff:S, 0x260000-0x267fff:S, 0x268000-0x26ffff:S, 0x270000-0x277fff:S, 0x278000-0x27ffff:S, 0x280000-0x287fff:S, 0x288000-0x28ffff:S, 0x290000-0x297fff:S, 0x298000-0x29ffff:S, 0x2a0000-0x2a7fff:S, 0x2a8000-0x2affff:S, 0x2b0000-0x2b7fff:S, 0x2b8000-0x2bffff:S, 0x2c0000-0x2c7fff:S, 0x2c8000-0x2cffff:S, 0x2d0000-0x2d7fff:S, 0x2d8000-0x2dffff:S, 0x2e0000-0x2e7fff:S, 0x2e8000-0x2effff:S, 0x2f0000-0x2f7fff:S, 0x2f8000-0x2fffff:S, 0x300000-0x307fff:S, 0x308000-0x30ffff:S, 0x310000-0x317fff:S, 0x318000-0x31ffff:S, 0x320000-0x327fff:S, 0x328000-0x32ffff:S, 0x330000-0x337fff:S, 0x338000-0x33ffff:S, 0x340000-0x347fff:S, 0x348000-0x34ffff:S, 0x350000-0x357fff:S, 0x358000-0x35ffff:S, 0x360000-0x367fff:S, 0x368000-0x36ffff:S, 0x370000-0x377fff:S, 0x378000-0x37ffff:S, 0x380000-0x387fff:S, 0x388000-0x38ffff:S, 0x390000-0x397fff:S, 0x398000-0x39ffff:S, 0x3a0000-0x3a7fff:S, 0x3a8000-0x3affff:S, 0x3b0000-0x3b7fff:S, 0x3b8000-0x3bffff:S, 0x3c0000-0x3c7fff:S, 0x3c8000-0x3cffff:S, 0x3d0000-0x3d7fff:S, 0x3d8000-0x3dffff:S, 0x3e0000-0x3e7fff:S, 0x3e8000-0x3effff:S, 0x3f0000-0x3f7fff:S, 0x3f8000-0x3fffff:S, 0x400000-0x407fff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_52 failed during command execution at address 0x400000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:S, 0x210000-0x21ffff:S, 0x220000-0x22ffff:S, 0x230000-0x23ffff:S, 0x240000-0x24ffff:S, 0x250000-0x25ffff:S, 0x260000-0x26ffff:S, 0x270000-0x27ffff:S, 0x280000-0x28ffff:S, 0x290000-0x29ffff:S, 0x2a0000-0x2affff:S, 0x2b0000-0x2bffff:S, 0x2c0000-0x2cffff:S, 0x2d0000-0x2dffff:S, 0x2e0000-0x2effff:S, 0x2f0000-0x2fffff:S, 0x300000-0x30ffff:S, 0x310000-0x31ffff:S, 0x320000-0x32ffff:S, 0x330000-0x33ffff:S, 0x340000-0x34ffff:S, 0x350000-0x35ffff:S, 0x360000-0x36ffff:S, 0x370000-0x37ffff:S, 0x380000-0x38ffff:S, 0x390000-0x39ffff:S, 0x3a0000-0x3affff:S, 0x3b0000-0x3bffff:S, 0x3c0000-0x3cffff:S, 0x3d0000-0x3dffff:S, 0x3e0000-0x3effff:S, 0x3f0000-0x3fffff:S, 0x400000-0x40ffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_d8 failed during command execution at address 0x400000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. Restoring MMIO space at 0x1005618a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASUSTeK K50IN 223 read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/20/z358b9w11kq_06vpwcv0wtc00000gn/T/DPCI4tPn3W.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 322M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1052 us, 10000 myus = 10537 us, 4 myus = 3 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "ASUSTeK Computer Inc. " DMI string system-product-name: "K50IN " DMI string system-version: "1.0 " DMI string baseboard-manufacturer: "ASUSTeK Computer Inc. " DMI string baseboard-product-name: "K50IN " DMI string baseboard-version: "1.0 " DMI string chassis-type: "Notebook" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: Quanta 30D2 F.5A read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Volumes/Dados/Apps/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/Quanta 30D2 F.5A.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 303M loops per second, 10 myus = 9 us, 100 myus = 94 us, 1000 myus = 1079 us, 10000 myus = 10146 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Pavilion dv6500 Notebook PC " DMI string system-version: "Rev 1" DMI string baseboard-manufacturer: "Quanta" DMI string baseboard-product-name: "30D2" DMI string baseboard-version: "79.2E" DMI string chassis-type: "Notebook" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: ASUSTeK P5Q PRO TURBO 0602 read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/Utilities/Tools/DPCIManager.app/Contents/MacOS/flashrom -VV -r /Extra/ASUSTeK P5Q PRO TURBO 0602.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 369M loops per second, 10 myus = 9 us, 100 myus = 93 us, 1000 myus = 999 us, 10000 myus = 10075 us, 4 myus = 3 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5Q PRO TURBO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0x1464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0xd8, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x90, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x9f, read w/o addr, none op[7]: 0xc7, write w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x08: 0x000fffc0 (FADDR) 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x007f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512, 64 kB: program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190 on-the-fly OPCODE (0x15) re-programmed, op-pos=2 probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Found Macronix flash chip "MX25L8005/MX25V8005" (1024 kB, SPI) at physical address 0xfff00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512(A), 64 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 Signature = 0xffffffff (should be 0x50444653) No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x4d, id2 0x73, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x48, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Macronix flash chip "MX25L8005/MX25V8005" (1024 kB, SPI). Block protection is disabled. Reading flash... Error: opening file "/Extra/ASUSTeK P5Q PRO TURBO 0602.rom" failed: Permission denied FAILED. Restoring MMIO space at 0x10f9e68a0 Restoring MMIO space at 0x10f9e689c Restoring MMIO space at 0x10f9e6898 Restoring MMIO space at 0x10f9e6896 Restoring MMIO space at 0x10f9e6894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASUSTeK Rampage III GENE 0704 read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Desktop/SOFT/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/67/7dr6ydxj37j021lmthyrhqgm0000gn/T/DPCIyU1tQd.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 445M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10014 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "Rampage III GENE" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0x65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0xd8, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x90, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x9f, read w/o addr, none op[7]: 0xc7, write w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x000f0000 FREG0: Flash Descriptor region (0x00000000-0x0000ffff) is read-write. 0x58: 0x01ff0000 FREG1: BIOS region (0x00000000-0x001fffff) is read-write. 0x5C: 0x00000fff FREG2: Management Engine region is unused. 0x60: 0x001f0010 FREG3: Gigabit Ethernet region (0x00010000-0x0001ffff) is read-write. 0x64: 0x01ff0060 FREG4: Platform Data region (0x00060000-0x001fffff) is read-write. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x004130 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=3, DBC=1, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002009 (LVSCC) LVSCC: BES=0x1, WG=0, WSR=1, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002009 (UVSCC) UVSCC: BES=0x1, WG=0, WSR=1, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x03040001 FLMAP1 0x03100206 FLMAP2 0x00000120 --- Details --- NR (Number of Regions): 4 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x010 ISL (ICH/PCH Strap Length): 3 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x00300012 FLILL 0x00000000 --- Details --- Component 1 density: 2 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 20 MHz Write and Erase Clock Freq.: 20 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x000f0000 FLREG1 0x01ff0000 FLREG2 0x00000fff FLREG3 0x001f0010 FLREG4 0x01ff0060 --- Details --- Region 0 (Descr.) 0x00000000 - 0x0000ffff Region 1 (BIOS ) 0x00000000 - 0x001fffff Region 2 (ME ) is unused. Region 3 (GbE ) 0x00010000 - 0x0001ffff Region 4 (Platf.) 0x00060000 - 0x001fffff === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0218 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F512, 64 kB: program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190 on-the-fly OPCODE (0x15) re-programmed, op-pos=2 probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605" (2048 kB, SPI) at physical address 0xffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605A/MX25L1606E" (2048 kB, SPI) at physical address 0xffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605D/MX25L1608D" (2048 kB, SPI) at physical address 0xffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Multiple flash chip definitions match the detected chip(s): "MX25L1605", "MX25L1605A/MX25L1606E", "MX25L1605D/MX25L1608D" Please specify which chip definition to use with the -c <chipname> option. Restoring MMIO space at 0x1027488a0 Restoring MMIO space at 0x10274889c Restoring MMIO space at 0x102748898 Restoring MMIO space at 0x102748896 Restoring MMIO space at 0x102748894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: Gigabyte H77N-WIFI F3c read
by dpcimanager＠users.sourceforge.net 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /Volumes/Daten OS X/Gigabyte H77N-WIFI F3c.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 465M loops per second, 10 myus = 10 us, 100 myus = 106 us, 1000 myus = 1054 us, 10000 myus = 10528 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "H77N-WIFI" DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel H77" with PCI ID 8086:1e4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc60: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0000 FREG1: BIOS region (0x00000000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf94240 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=2, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0000 FLREG2 0x01ff0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00000000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, OK. Super I/O ID 0x8728 is not on the list of flash capable controllers. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6445E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E" Please specify which chip definition to use with the -c <chipname> option. Restoring MMIO space at 0x1022a88a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

W836xx: PLCSF8: flashrom -V
by Robin Kreis 31 Aug '13

31 Aug '13

flashrom v0.9.7-r1711 on Linux 3.10.9-1-ARCH (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, GCC 4.8.1 20130725 (prerelease), little endian Command line (2 args): flashrom --programmer=internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 2493M loops per second, 10 myus = 10 us, 100 myus = 105 us, 1000 myus = 1007 us, 10000 myus = 10006 us, 4 myus = 6 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "TOSHIBA" DMI string system-product-name: "SATELLITE PRO C850-1K0" DMI string system-version: "PSCBXE-02E00KGR" DMI string baseboard-manufacturer: "Intel" DMI string baseboard-product-name: "PLCSF8" DMI string baseboard-version: "Type2 - Board Version" DMI string chassis-type: "Notebook" Laptop detected via DMI. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 02. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

flashrom -V
by Grigorij Kuzmin 31 Aug '13

31 Aug '13

1 0

[commit] r1732 - trunk
by repository service 31 Aug '13

31 Aug '13

Author: stefanct Date: Sat Aug 31 00:23:02 2013 New Revision: 1732 URL: http://flashrom.org/trac/flashrom/changeset/1732 Log: layout: Rename romlayout_t to romentry_t. The type describes one entry of the whole layout actually. Using layout_entry_t or something similar would be more correct, but due to it length we will use "rom" instead of "layout" here and in upcoming code. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/layout.c Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Sat Aug 31 00:22:57 2013 (r1731) +++ trunk/layout.c Sat Aug 31 00:23:02 2013 (r1732) @@ -32,10 +32,10 @@ unsigned int end; unsigned int included; char name[256]; -} romlayout_t; +} romentry_t; /* rom_entries store the entries specified in a layout file and associated run-time data */ -static romlayout_t rom_entries[MAX_ROMLAYOUT]; +static romentry_t rom_entries[MAX_ROMLAYOUT]; static int num_rom_entries = 0; /* the number of valid rom_entries */ /* include_args holds the arguments specified at the command line with -i. They must be processed at some point @@ -189,12 +189,12 @@ return 0; } -romlayout_t *get_next_included_romentry(unsigned int start) +romentry_t *get_next_included_romentry(unsigned int start) { int i; unsigned int best_start = UINT_MAX; - romlayout_t *best_entry = NULL; - romlayout_t *cur; + romentry_t *best_entry = NULL; + romentry_t *cur; /* First come, first serve for overlapping regions. */ for (i = 0; i < num_rom_entries; i++) { @@ -219,7 +219,7 @@ int handle_romentries(const struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; - romlayout_t *entry; + romentry_t *entry; unsigned int size = flash->chip->total_size * 1024; /* If no regions were specified for inclusion, assume

1 0

[commit] r1731 - trunk
by repository service 31 Aug '13

31 Aug '13

Author: stefanct Date: Sat Aug 31 00:22:57 2013 New Revision: 1731 URL: http://flashrom.org/trac/flashrom/changeset/1731 Log: layout: Rename romimages to num_rom_entries. Since we are planning to support image files for rom entries, rename the variable used to count the number of known rom entries to avoid confusion. There is already num_include_args with similar semantics, hence we use num_rom_entries. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/layout.c Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Fri Aug 30 23:29:45 2013 (r1730) +++ trunk/layout.c Sat Aug 31 00:22:57 2013 (r1731) @@ -25,8 +25,6 @@ #include "flash.h" #include "programmer.h" -static int romimages = 0; - #define MAX_ROMLAYOUT 32 typedef struct { @@ -36,13 +34,14 @@ char name[256]; } romlayout_t; -/* include_args lists arguments specified at the command line with -i. They - * must be processed at some point so that desired regions are marked as - * "included" in the rom_entries list. - */ -static char *include_args[MAX_ROMLAYOUT]; -static int num_include_args = 0; /* the number of valid entries. */ +/* rom_entries store the entries specified in a layout file and associated run-time data */ static romlayout_t rom_entries[MAX_ROMLAYOUT]; +static int num_rom_entries = 0; /* the number of valid rom_entries */ + +/* include_args holds the arguments specified at the command line with -i. They must be processed at some point + * so that desired regions are marked as "included" in the rom_entries list. */ +static char *include_args[MAX_ROMLAYOUT]; +static int num_include_args = 0; /* the number of valid include_args. */ #ifndef __LIBPAYLOAD__ int read_romlayout(char *name) @@ -62,12 +61,12 @@ while (!feof(romlayout)) { char *tstr1, *tstr2; - if (romimages >= MAX_ROMLAYOUT) { + if (num_rom_entries >= MAX_ROMLAYOUT) { msg_gerr("Maximum number of ROM images (%i) in layout " "file reached.\n", MAX_ROMLAYOUT); return 1; } - if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[romimages].name)) + if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[num_rom_entries].name)) continue; #if 0 // fscanf does not like arbitrary comments like that :( later @@ -82,13 +81,13 @@ fclose(romlayout); return 1; } - rom_entries[romimages].start = strtol(tstr1, (char **)NULL, 16); - rom_entries[romimages].end = strtol(tstr2, (char **)NULL, 16); - rom_entries[romimages].included = 0; - romimages++; + rom_entries[num_rom_entries].start = strtol(tstr1, (char **)NULL, 16); + rom_entries[num_rom_entries].end = strtol(tstr2, (char **)NULL, 16); + rom_entries[num_rom_entries].included = 0; + num_rom_entries++; } - for (i = 0; i < romimages; i++) { + for (i = 0; i < num_rom_entries; i++) { msg_gdbg("romlayout %08x - %08x named %s\n", rom_entries[i].start, rom_entries[i].end, rom_entries[i].name); @@ -139,11 +138,11 @@ { int i; - if (!romimages) + if (num_rom_entries == 0) return -1; msg_gspew("Looking for region \"%s\"... ", name); - for (i = 0; i < romimages; i++) { + for (i = 0; i < num_rom_entries; i++) { if (!strcmp(rom_entries[i].name, name)) { rom_entries[i].included = 1; msg_gspew("found.\n"); @@ -166,7 +165,7 @@ return 0; /* User has specified an area, but no layout file is loaded. */ - if (!romimages) { + if (num_rom_entries == 0) { msg_gerr("Region requested (with -i \"%s\"), " "but no layout data is available.\n", include_args[0]); @@ -198,7 +197,7 @@ romlayout_t *cur; /* First come, first serve for overlapping regions. */ - for (i = 0; i < romimages; i++) { + for (i = 0; i < num_rom_entries; i++) { cur = &rom_entries[i]; if (!cur->included) continue;

1 0

[commit] r1730 - trunk
by repository service 30 Aug '13

30 Aug '13

Author: stefanct Date: Fri Aug 30 23:29:45 2013 New Revision: 1730 URL: http://flashrom.org/trac/flashrom/changeset/1730 Log: libpayload: Remove file I/O in flashrom.c. read_buf_from_file() and write_buf_to_file() use file streams which are not supported in libpayload. Signed-off-by: Nico Huber <nico.huber(a)secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Aug 29 15:15:36 2013 (r1729) +++ trunk/flashrom.c Fri Aug 30 23:29:45 2013 (r1730) @@ -1166,6 +1166,10 @@ int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename) { +#ifdef __LIBPAYLOAD__ + msg_gerr("Error: No file I/O support in libpayload\n"); + return 1; +#else unsigned long numbytes; FILE *image; struct stat image_stat; @@ -1196,11 +1200,16 @@ return 1; } return 0; +#endif } int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename) { +#ifdef __LIBPAYLOAD__ + msg_gerr("Error: No file I/O support in libpayload\n"); + return 1; +#else unsigned long numbytes; FILE *image; @@ -1221,6 +1230,7 @@ return 1; } return 0; +#endif } int read_flash_to_file(struct flashctx *flash, const char *filename)

1 0

[PATCH] Reorganize shutting down.
by Stefan Tauner 30 Aug '13

30 Aug '13

This was mainly driven by getting rid of cli_classic_abort_usage() in cli_classic.c. This makes the whole main function more consistent and fixes a myriad of (theoretical) memory leaks. This slightly changes output in most error cases. doit() stops calling programmer_shutdown() with this patch, beware. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- cli_classic.c | 147 ++++++++++++++++++++++++---------------------------------- flashrom.c | 13 +++--- 2 files changed, 68 insertions(+), 92 deletions(-) diff --git a/cli_classic.c b/cli_classic.c index 4c71d07..5ad554c 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -71,12 +71,6 @@ static void cli_classic_usage(const char *name) "If no operation is specified, flashrom will only probe for flash chips.\n"); } -static void cli_classic_abort_usage(void) -{ - printf("Please run \"flashrom --help\" for usage info.\n"); - exit(1); -} - static int check_filename(char *filename, char *type) { if (!filename || (filename[0] == '\0')) { @@ -151,40 +145,36 @@ int main(int argc, char *argv[]) switch (opt) { case 'r': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } filename = strdup(optarg); read_it = 1; break; case 'w': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } filename = strdup(optarg); write_it = 1; break; case 'v': - //FIXME: gracefully handle superfluous -v if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } if (dont_verify_it) { - fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "--verify and --noverify are mutually exclusive.\n"); + goto out_abort; } filename = strdup(optarg); verify_it = 1; break; case 'n': if (verify_it) { - fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "--verify and --noverify are mutually exclusive.\n"); + goto out_abort; } dont_verify_it = 1; break; @@ -198,9 +188,8 @@ int main(int argc, char *argv[]) break; case 'E': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } erase_it = 1; break; @@ -209,9 +198,8 @@ int main(int argc, char *argv[]) break; case 'l': if (layoutfile) { - fprintf(stderr, "Error: --layout specified " - "more than once. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "Error: --layout specified more than once.\n"); + goto out_abort; } layoutfile = strdup(optarg); break; @@ -219,31 +207,28 @@ int main(int argc, char *argv[]) tempstr = strdup(optarg); if (register_include_arg(tempstr)) { free(tempstr); - cli_classic_abort_usage(); + goto out_abort; } /* FIXME: A pointer to the image name is saved in a static array (of size MAX_ROMLAYOUT) * by register_include_arg() and needs to be freed after processing them. */ break; case 'L': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } list_supported = 1; break; case 'z': #if CONFIG_PRINT_WIKI == 1 if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } list_supported_wiki = 1; #else - fprintf(stderr, "Error: Wiki output was not compiled " - "in. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "Error: Wiki output was not compiled in.\n"); + goto out_abort; #endif break; case 'p': @@ -253,7 +238,7 @@ int main(int argc, char *argv[]) "multiple\nparameters for a programmer " "with \",\". Please see the man page " "for details.\n"); - cli_classic_abort_usage(); + goto out_abort; } for (prog = 0; prog < PROGRAMMER_INVALID; prog++) { name = programmer_table[prog].name; @@ -285,63 +270,59 @@ int main(int argc, char *argv[]) optarg); list_programmers_linebreak(0, 80, 0); msg_ginfo(".\n"); - cli_classic_abort_usage(); + goto out_abort; } break; case 'R': /* print_version() is always called during startup. */ if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } - exit(0); - break; + goto out; case 'h': if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "More than one operation specified.\n"); + goto out_abort; } cli_classic_usage(argv[0]); - exit(0); - break; + goto out; case 'o': #ifdef STANDALONE - fprintf(stderr, "Log file not supported in standalone mode. Aborting.\n"); - cli_classic_abort_usage(); + fprintf(stderr, "Log file not supported in standalone mode.\n"); + goto out_abort; #else /* STANDALONE */ logfile = strdup(optarg); if (logfile[0] == '\0') { fprintf(stderr, "No log filename specified.\n"); - cli_classic_abort_usage(); + goto out_abort; } #endif /* STANDALONE */ break; default: - cli_classic_abort_usage(); - break; + goto out_abort; } } if (optind < argc) { fprintf(stderr, "Error: Extra parameter found.\n"); - cli_classic_abort_usage(); + goto out_abort; } if ((read_it | write_it | verify_it) && check_filename(filename, "image")) { - cli_classic_abort_usage(); + goto out_abort; } if (layoutfile && check_filename(layoutfile, "layout")) { - cli_classic_abort_usage(); + goto out_abort; } #ifndef STANDALONE - if (logfile && check_filename(logfile, "log")) - cli_classic_abort_usage(); - if (logfile && open_logfile(logfile)) - return 1; - free(logfile); + if (logfile && check_filename(logfile, "log")) { + goto out_abort; + } + if (logfile && open_logfile(logfile)) { + goto out_abort; + } #endif /* !STANDALONE */ #if CONFIG_PRINT_WIKI == 1 @@ -353,7 +334,7 @@ int main(int argc, char *argv[]) if (list_supported) { if (print_supported()) - ret = 1; + goto out_abort; goto out; } @@ -369,12 +350,10 @@ int main(int argc, char *argv[]) msg_gdbg("\n"); if (layoutfile && read_romlayout(layoutfile)) { - ret = 1; - goto out; + goto out_abort; } if (process_include_args()) { - ret = 1; - goto out; + goto out_abort; } /* Does a chip with the requested name exist in the flashchips array? */ if (chip_to_probe) { @@ -384,8 +363,7 @@ int main(int argc, char *argv[]) if (!chip || !chip->name) { msg_cerr("Error: Unknown chip '%s' specified.\n", chip_to_probe); msg_gerr("Run flashrom -L to view the hardware supported in this flashrom version.\n"); - ret = 1; - goto out; + goto out_abort; } /* Keep chip around for later usage in case a forced read is requested. */ } @@ -404,8 +382,7 @@ int main(int argc, char *argv[]) "Valid choices are:\n"); list_programmers_linebreak(0, 80, 0); msg_ginfo(".\n"); - ret = 1; - goto out; + goto out_abort; } } @@ -415,7 +392,7 @@ int main(int argc, char *argv[]) if (programmer_init(prog, pparam)) { msg_perr("Error: Programmer initialization failed.\n"); ret = 1; - goto out_shutdown; + goto out; /* Lots of init code prints "Aborting." at the end. Avoid printing it again here. */ } tempstr = flashbuses_to_text(get_buses_supported()); msg_pdbg("The following protocols are supported: %s.\n", tempstr); @@ -438,8 +415,7 @@ int main(int argc, char *argv[]) for (i = 1; i < chipcount; i++) msg_cinfo(", \"%s\"", flashes[i].chip->name); msg_cinfo("\nPlease specify which chip definition to use with the -c <chipname> option.\n"); - ret = 1; - goto out_shutdown; + goto out_abort; } else if (!chipcount) { msg_cinfo("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { @@ -459,8 +435,7 @@ int main(int argc, char *argv[]) } if (!compatible_programmers) { msg_cinfo("No compatible controller found for the requested flash chip.\n"); - ret = 1; - goto out_shutdown; + goto out_abort; } if (compatible_programmers > 1) msg_cinfo("More than one compatible controller found for the requested flash " @@ -474,16 +449,14 @@ int main(int argc, char *argv[]) if (startchip == -1) { // FIXME: This should never happen! Ask for a bug report? msg_cinfo("Probing for flash chip '%s' failed.\n", chip_to_probe); - ret = 1; - goto out_shutdown; + goto out_abort; } msg_cinfo("Please note that forced reads most likely contain garbage.\n"); ret = read_flash_to_file(&flashes[0], filename); free(flashes[0].chip); - goto out_shutdown; + goto out; } - ret = 1; - goto out_shutdown; + goto out_abort; } else if (!chip_to_probe) { /* repeat for convenience when looking at foreign logs */ tempstr = flashbuses_to_text(flashes[0].chip->bustype); @@ -499,13 +472,12 @@ int main(int argc, char *argv[]) size = fill_flash->chip->total_size * 1024; if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->chip->bustype, size) && (!force)) { msg_cerr("Chip is too big for this programmer (-V gives details). Use --force to override.\n"); - ret = 1; - goto out_shutdown; + goto out_abort; } if (!(read_it | write_it | verify_it | erase_it)) { msg_ginfo("No operations were specified.\n"); - goto out_shutdown; + goto out; } /* Always verify write operations unless -n is used. */ @@ -518,12 +490,14 @@ int main(int argc, char *argv[]) */ programmer_delay(100000); ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); - /* Note: doit() already calls programmer_shutdown(). */ goto out; -out_shutdown: - programmer_shutdown(); +out_abort: + msg_gerr("Aborting.\n"); + ret = 1; out: + programmer_shutdown(); + for (i = 0; i < chipcount; i++) free(flashes[i].chip); @@ -534,6 +508,7 @@ out: free((char *)chip_to_probe); /* Silence! Freeing is not modifying contents. */ chip_to_probe = NULL; #ifndef STANDALONE + free(logfile); ret |= close_logfile(); #endif /* !STANDALONE */ return ret; diff --git a/flashrom.c b/flashrom.c index 86e64a2..0f4b367 100644 --- a/flashrom.c +++ b/flashrom.c @@ -413,6 +413,11 @@ int programmer_init(enum programmer prog, const char *param) return ret; } +/** Calls registered shutdown functions and resets internal programmer-related variables. + * Calling it is safe even without previous initialization, but further interactions with programmer support + * require a call to programmer_init() (afterwards). + * + * @return The OR-ed result values of all shutdown functions (i.e. 0 on success). */ int programmer_shutdown(void) { int ret = 0; @@ -1900,8 +1905,7 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { msg_cerr("Aborting.\n"); - ret = 1; - goto out_nofree; + return 1; } /* Given the existence of read locks, we want to unlock for read, @@ -1911,8 +1915,7 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, flash->chip->unlock(flash); if (read_it) { - ret = read_flash_to_file(flash, filename); - goto out_nofree; + return read_flash_to_file(flash, filename); } oldcontents = malloc(size); @@ -2030,7 +2033,5 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, out: free(oldcontents); free(newcontents); -out_nofree: - programmer_shutdown(); return ret; } -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/2] Improve getrevision.sh.
by Stefan Tauner 29 Aug '13

29 Aug '13

TODO: dates (and timestamps) should be in UTC (or include an offset). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[commit] r1729 - trunk
by repository service 29 Aug '13

29 Aug '13

Author: stefanct Date: Thu Aug 29 15:15:36 2013 New Revision: 1729 URL: http://flashrom.org/trac/flashrom/changeset/1729 Log: Add now auto-generated manpage to svn:ignore. I had to touch svn directly, where is my reimbursement? Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/ (props changed)

1 0

Verbose Log Intel DH61HO
by jasongyorog＠gmail.com 29 Aug '13

29 Aug '13

-- ------ Jason http://www.studionetworksolutions.com/ ------ "Socialism never took root in America because the poor see themselves not as an exploited proletariat, but as temporarily embarrassed millionaires." - paraphrased from John Steinbeck

1 0

[PATCH] Makefile: Warn if user tries to compile for libpayload w/o crossgcc.
by Stefan Tauner 29 Aug '13

29 Aug '13

While flashrom is not as picky on compilers as coreboot, there is still a high probablilty of breakage when one combines libpayload and distribution compilers. Print a warning if we detect that to give the daring user a hint how to resolve the explosions potentially following below it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- Makefile | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Makefile b/Makefile index 70ef640..e000f4e 100644 --- a/Makefile +++ b/Makefile @@ -712,6 +712,11 @@ compiler: featuresavailable @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ ( echo "unknown. Aborting."; exit 1) @printf "%s\n" '$(TARGET_OS)' +ifeq ($(TARGET_OS), libpayload) + @$(CC) --version 2>&1 | grep -q coreboot || \ + ( echo "Warning: It seems you are not using coreboot's reference compiler."; \ + echo "This might work but usually does not, please beware." ) +endif define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ -- Kind regards, Stefan Tauner

1 0

[commit] r1728 - trunk
by repository service 29 Aug '13

29 Aug '13

Author: stefanct Date: Thu Aug 29 02:38:19 2013 New Revision: 1728 URL: http://flashrom.org/trac/flashrom/changeset/1728 Log: Automatically add version and date to the manpage. To avoid funny effects of ever changing files tracked by the VCS this patch moves the manpage data to flashrom.8.tmpl and generates the actual manpage with a new makefile target if needed. Signed-Off-By: Joerg Mayer <jmayer(a)loplof.de> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Added: trunk/flashrom.8.tmpl - copied, changed from r1727, trunk/flashrom.8 Deleted: trunk/flashrom.8 Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Aug 29 02:38:14 2013 (r1727) +++ trunk/Makefile Thu Aug 29 02:38:19 2013 (r1728) @@ -649,7 +649,7 @@ LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS) OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS) -all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) +all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8 ifeq ($(ARCH), x86) @+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX) endif @@ -673,7 +673,7 @@ # This includes all frontends and libflashrom. # We don't use EXEC_SUFFIX here because we want to clean everything. clean: - rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d + rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 @+$(MAKE) -C util/ich_descriptors_tool/ clean distclean: clean @@ -867,16 +867,20 @@ @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX) -install: $(PROGRAM)$(EXEC_SUFFIX) +$(PROGRAM).8: $(PROGRAM).8.tmpl + @sed -e '1 s#".*".*#"$(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl)" "$(VERSION)"#' <$< >$@ + +install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8 mkdir -p $(DESTDIR)$(PREFIX)/sbin mkdir -p $(DESTDIR)$(MANDIR)/man8 $(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin $(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8 -export: +export: $(PROGRAM).8 @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME) @svn export -r BASE . $(EXPORTDIR)/flashrom-$(RELEASENAME) @sed "s/^SVNVERSION.*/SVNVERSION := $(SVNVERSION)/" Makefile >$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile + @cp $(PROGRAM).8 "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$(PROGRAM).8" @LC_ALL=C svn log >$(EXPORTDIR)/flashrom-$(RELEASENAME)/ChangeLog @echo Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/ @@ -890,6 +894,6 @@ libpayload: clean make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib -.PHONY: all clean distclean compiler hwlibs features export tarball dos featuresavailable +.PHONY: all install clean distclean compiler hwlibs features export tarball dos featuresavailable -include $(OBJS:.o=.d) Copied and modified: trunk/flashrom.8.tmpl (from r1727, trunk/flashrom.8) ============================================================================== --- trunk/flashrom.8 Thu Aug 29 02:38:14 2013 (r1727, copy source) +++ trunk/flashrom.8.tmpl Thu Aug 29 02:38:19 2013 (r1728) @@ -1,4 +1,4 @@ -.TH FLASHROM 8 "Jul, 2013" +.TH FLASHROM 8 "" "" .SH NAME flashrom \- detect, read, write, verify and erase flash chips .SH SYNOPSIS

1 0

[commit] r1727 - in trunk: . util
by repository service 29 Aug '13

29 Aug '13

Author: stefanct Date: Thu Aug 29 02:38:14 2013 New Revision: 1727 URL: http://flashrom.org/trac/flashrom/changeset/1727 Log: Improve getrevision.sh. - remove bashism. - simplify some git-related code. - improved parameter and error handling. - additional -d/--date action which is similar to the timestamp action. - support for an optional path parameter. - there is only one sane time format. - and only one sane date format too. - use UTC dates and times only. - vastly improve git_url() to print the correct remote url and "nearest" branch. - remove username from repository URLs. - add "-dirty" to local revisions if there are uncommitted changes. - indicate in local revisions how many git-only commits were done since branching from upstream svn. - fix svn_revision() fallback to svn info and remove git-svn. - print leading r in script instead of hardcode it in the makefile; no more "0.9.7-runknown". - make retrieving the upstream revision work even in cloned git-svn repositories. - more abstractions and helper functions. - less fragmentation of actual functionality. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile trunk/util/getrevision.sh Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Wed Aug 28 11:55:04 2013 (r1726) +++ trunk/Makefile Thu Aug 29 02:38:14 2013 (r1727) @@ -333,14 +333,13 @@ CLI_OBJS = cli_classic.o cli_output.o print.o -# Set the flashrom version string from the highest revision number -# of the checked out flashrom files. +# Set the flashrom version string from the highest revision number of the checked out flashrom files. # Note to packagers: Any tree exported with "make export" or "make tarball" # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell ./util/getrevision.sh -u) RELEASE := 0.9.7 -VERSION := $(RELEASE)-r$(SVNVERSION) +VERSION := $(RELEASE)-$(SVNVERSION) RELEASENAME ?= $(VERSION) SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"' Modified: trunk/util/getrevision.sh ============================================================================== --- trunk/util/getrevision.sh Wed Aug 28 11:55:04 2013 (r1726) +++ trunk/util/getrevision.sh Thu Aug 29 02:38:14 2013 (r1727) @@ -1,10 +1,11 @@ -#!/bin/bash +#!/bin/sh # # This file is part of the flashrom project. # # Copyright (C) 2005 coresystems GmbH <stepan(a)coresystems.de> # Copyright (C) 2009,2010 Carl-Daniel Hailfinger # Copyright (C) 2010 Chromium OS Authors +# Copyright (C) 2013 Stefan Tauner # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,205 +27,257 @@ # Make sure we don't get translated output export LC_ALL=C +# nor local times or dates +export TZ=UTC0 -svn_revision() { - svnversion -cn . 2>/dev/null | \ - sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | \ - grep "[0-9]" || - svn info . 2>/dev/null | \ - awk '/^Revision:/ {print $$2 }' | \ - grep "[0-9]" || - git svn info . 2>/dev/null | \ - awk '/^Revision:/ {print $$2 }' | \ - grep "[0-9]" || - echo '' -} - -svn_url() { - echo $(svn info 2>/dev/null | - grep URL: | - sed 's/.*URL:[[:blank:]]*//' | - grep ^. - ) -} - -svn_timestamp() { - local date_format="+%Y-%m-%d %H:%M:%S" - local timestamp - - # are there local changes in the client? - if svn status | egrep '^ *[ADMR] *' > /dev/null ; then - timestamp=$(date "${date_format} +") - else - # No local changes, get date of the last log record. - local last_commit_date=$(svn info | grep '^Last Changed Date:' | awk '{print $4" "$5" "$6}') - timestamp=$(date --utc --date "${last_commit_date}" \ - "${date_format} UTC") - fi - - echo "${timestamp}" +# Helper functions +# First argument is the path to inspect (usually optional; w/o it the whole repository will be considered) +svn_has_local_changes() { + svn status "$1" | egrep '^ *[ADMR] *' >/dev/null } -git_revision() { - echo $(git log --oneline | head -1 | awk '{print $1}') +git_has_local_changes() { + git update-index -q --refresh >/dev/null + ! git diff-index --quiet HEAD -- "$1" } -# Retrieve svn revision using git log data (for git mirrors) -gitsvn_revision() { - local r +git_last_commit() { + git log --pretty=format:"%h" -1 -- "$1" +} - git log| - grep git-svn-id| - sed 's/.*git-svn-id:[[:blank:]]*$[^@]\+$@[0-9]\+[[:blank:]]\+$[^[:blank:]]\+$/\1 \2/'| - sort| - uniq| - read url uuid +svn_is_file_tracked() { + svn info "$1" >/dev/null 2>&1 +} - r=$(git log --grep="git-svn-id.*$uuid"| grep git-svn-id | \ - sed 's/.*@//;s/[[:blank:]].*//'| \ - sort -n | \ - tail -1) +git_is_file_tracked() { + git ls-files --error-unmatch -- "$1" >/dev/null 2>&1 +} - echo "${r}" +is_file_tracked() { + svn_is_file_tracked "$1" || git_is_file_tracked "$1" } -git_timestamp() { - local date_format="+%b %d %Y %H:%M:%S" - local timestamp - - # are there local changes in the client? - if git status | \ - egrep '^# Change(s to be committed|d but not updated):$' > /dev/null - then - timestamp=$(date "${date_format} +") - else - # No local changes, get date of the last log record. - local last_commit_date=$(git log | head -3 | grep '^Date:' | \ - awk '{print $3" "$4" "$6" "$5" "$7}') - timestamp=$(date --utc --date "${last_commit_date}" \ - "${date_format} UTC") +# Tries to find a remote source for the changes committed locally. +# This includes the URL of the remote repository including the last commit and a suitable branch name. +# Takes one optional argument: the path to inspect +git_url() { + last_commit=$(git_last_commit "$1") + # get all remote branches containing the last commit (excluding origin/HEAD and git-svn branches/tags) + branches=$(git branch -r --contains $last_commit | sed '/\//!d;/.*->.*/d;s/[\t ]*//') + if [ -z "$branches" ] ; then + echo "No remote branch contains a suitable commit">&2 + return fi - echo "${timestamp}" -} + # find "nearest" branch + local mindiff=9000 + local target= + for branch in $branches ; do + curdiff=$(git rev-list --count $last_commit..$branch) + if [ $curdiff -ge $mindiff ] ; then + continue + fi + mindiff=$curdiff + target=$branch + done -git_url() { - # Only the first line of `git remote' is considered. - echo $(git remote show origin 2>/dev/null | - grep 'Fetch URL:' | - sed 's/.*URL:[[:blank:]]*//' | - grep ^. - ) + echo "$(git ls-remote --exit-code --get-url ${target%/*}) ${target#*/}" } +# Returns a string indicating where others can get the current source code (excluding uncommitted changes) +# Takes one optional argument: the path to inspect scm_url() { - local url + local url= - if [ -d ".svn" ] ; then - url=$(svn_url) - elif [ -d ".git" ] ; then - url=$(git_url) + # for a primitive VCS like subversion finding the URL is easy: there is only one upstream host + if svn_is_file_tracked "$1" ; then + url="$(svn info "$1" 2>/dev/null | + grep URL: | + sed 's/.*URL:[[:blank:]]*//;s/:\/\/.*@/:\/\//' | + grep ^.)" + elif git_is_file_tracked "$1" ; then + url="$(git_url "$1")" + else + return ${EXIT_FAILURE} fi echo "${url}" } # Retrieve timestamp since last modification. If the sources are pristine, -# then the timestamp will match that of the SCM's more recent modification +# then the timestamp will match that of the SCM's most recent modification # date. timestamp() { local t - if [ -d ".svn" ] ; then - t=$(svn_timestamp) - elif [ -d ".git" ] ; then - t=$(git_timestamp) + if svn_is_file_tracked "$2" ; then + if svn_has_local_changes "$2"; then + t=$(date -u "$1") + else + # No local changes, get date of the last log record. + local last_commit_date="$(svn info "$2" | \ + grep '^Last Changed Date:' | \ + awk '{print $4" "$5" "$6}')" + t=$(date -d "${last_commit_date}" -u "$1") + fi + elif git_is_file_tracked "$2" ; then + # are there local changes? + if git_has_local_changes "$2" ; then + t=$(date -u "${1}") + else + # No local changes, get date of the last commit + t=$(date -d "$(git log --pretty=format:"%cD" -1 -- "$2")" -u "$1") + fi + else + t=$(date -u "$1") fi - echo ${t} + echo "${t}" } -# Retrieve local SCM revision info. This is useful if we're working in -# a even different SCM than upstream. -# -# If local copy is svn, then there is nothing to do here. -# If local copy is git, then retrieve useful git revision info +# Retrieve local SCM revision info. This is useful if we're working in a different SCM than upstream and/or +# have local changes. local_revision() { - local r + local r= - if [ -d ".git" ] ; then - r=$(git_revision) + if svn_is_file_tracked "$1" ; then + r=$(svn_has_local_changes "$1" && echo "dirty") + elif git_is_file_tracked "$1" ; then + r=$(git_last_commit "$1") + + local svn_base=$(git log --grep git-svn-id -1 --format='%h') + if [ "$svn_base" != "" ] ; then + local diff_to_svn=$(git rev-list --count ${svn_base}..${r}) + if [ "$diff_to_svn" -gt 0 ] ; then + r="$r-$diff_to_svn" + fi + fi + + if git_has_local_changes "$1" ; then + r="$r-dirty" + fi + else + return ${EXIT_FAILURE} fi - echo ${r} + echo "${r}" } # Get the upstream flashrom revision stored in SVN metadata. -# -# If the local copy is svn, then use svnversion -# If the local copy is git, then scrape upstream revision from git logs upstream_revision() { - local r + local r= - if [ -d ".svn" ] ; then - r=$(svn_revision) - elif [ -d ".git" ] ; then - r=$(gitsvn_revision) + if svn_is_file_tracked "$1" ; then + r=$(svn info "$1" 2>/dev/null | \ + grep "Last Changed Rev:" | \ + sed -e "s/^Last Changed Rev: *//" -e "s/$[0-9]*$.*/r\1/" | \ + grep "r[0-9]") + elif git_is_file_tracked "$1" ; then + # If this is a "native" git-svn clone we could use git svn log: + # git svn log --oneline -1 | sed 's/^r//;s/[[:blank:]].*//' or even git svn find-rev + # but it is easier to just grep for the git-svn-id unconditionally + r=$(git log --grep git-svn-id -1 -- "$1" | \ + grep git-svn-id | \ + sed 's/.*@/r/;s/[[:blank:]].*//') fi + if [ -z "$r" ]; then + r="unknown" # default to unknown + fi echo "${r}" } show_help() { echo "Usage: - ${0} <option> + ${0} <command> [path] -Options +Commands -h or --help - Display this message. - -u or --upstream - upstream flashrom revision + this message -l or --local - local revision (if different from upstream) + local revision information including an indicator for uncommitted changes + -u or --upstream + upstream revision + -U or --url + URL associated with the latest commit + -d or --date + date of most recent modification -t or --timestamp timestamp of most recent modification - -U or --url - url associated with local copy of flashrom - " +" return } -if [ ! -n "${1}" ] -then - show_help; - echo "No options specified"; - exit ${EXIT_SUCCESS} -fi - -# The is the main loop -while [[ ${1} = -* ]]; -do - case ${1} in - -h|--help) - show_help; - shift;; - -u|--upstream) - echo "$(upstream_revision)"; - shift;; - -l|--local) - echo "$(local_revision)"; - shift;; - -t|--timestamp) - echo "$(timestamp)"; - shift;; - -U|--url) - echo "$(scm_url)"; - shift;; - *) - show_help; - echo "invalid option: ${1}" +check_action() { + if [ -n "$action" ]; then + echo "Error: Multiple actions given.">&2 exit ${EXIT_FAILURE} - esac; -done + fi +} + +main() { + local query_path= + local action= + + # The is the main loop + while [ $# -gt 0 ]; + do + case ${1} in + -h|--help) + action=show_help; + shift;; + -l|--local) + check_action $1 + action=local_revision + shift;; + -u|--upstream) + check_action $1 + action=upstream_revision + shift;; + -U|--url) + check_action $1 + action=scm_url + shift;; + -d|--date) + check_action $1 + action="timestamp +%Y-%m-%d" # refrain from suffixing 'Z' to indicate it's UTC + shift;; + -t|--timestamp) + check_action $1 + action="timestamp +%Y-%m-%dT%H:%M:%SZ" # There is only one valid time format! ISO 8601 + shift;; + -*) + show_help; + echo "Error: Invalid option: ${1}" + exit ${EXIT_FAILURE};; + *) + if [ -z "$query_path" ] ; then + if [ ! -e "$1" ] ; then + echo "Error: Path \"${1}\" does not exist.">&2 + exit ${EXIT_FAILURE} + fi + query_path=$1 + else + echo "Warning: Ignoring over-abundant paramter: \"${1}\"">&2 + fi + shift;; + esac; + done + + # default to current directory (usually equals the whole repository) + if [ -z "$query_path" ] ; then + query_path=. + fi + if ! is_file_tracked "$query_path" ; then + echo "Warning: Path \"${query_path}\" is not under version control.">&2 + fi + if [ -z "$action" ] ; then + show_help + echo "Error: No actions specified" + exit ${EXIT_FAILURE} + fi + + $action "$query_path" +} -exit ${EXIT_SUCCESS} +main $@

1 0

[PATCH] Add an internal DMI decoder.
by Stefan Tauner 28 Aug '13

28 Aug '13

Previously we had to rely on dmidecode to decode the DMI/SMBIOS table. This patch integrates a DMI decoder into flashrom. The old behavior of calling dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no. Significant portions of this patch were taken from dmidecode, hence add its authors to the copyright notice (dmidecode is also GPL2+). We do a few things differently though. First of all we do more bounds checking to prevent accessing unmapped memory. We do not support disovery via EFI (yet), but memory scanning only. We handle the chassis-type lock bit correctly which dmidecode did not for a long while. The API to the rest of flashrom remains stable, but the output changes slightly. To share as much code as possible (which actually is not much), i have added dmi_fill methods that get called in dmi_init. They are reponsible to fill the dmi_strings array and setting the is_laptop variable. After it is called, dmi_init prints all dmi_strings. Previously the strings were printed in the order they were discovered, followed by the chassis-type, which is now output earlier (in dmi_fill). Because DJGPP does not support strnlen a simple implementation was added for it. This is still only available on x86; actually it is not even compiled in for other architectures at all anymore. Signed-off-by: Sean Nelson<audiohacked(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Maciej Pijanka <maciej.pijanka(a)gmail.com> Tested-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- My current version to be committed in two weeks at the latest. Makefile | 24 ++++- board_enable.c | 3 +- dmi.c | 322 ++++++++++++++++++++++++++++++++++++++++++++++----------- physmap.c | 5 + programmer.h | 3 + 5 files changed, 294 insertions(+), 63 deletions(-) diff --git a/Makefile b/Makefile index 5410a71..06de06f 100644 --- a/Makefile +++ b/Makefile @@ -439,6 +439,23 @@ endif endif ############################################################################### +# Handle CONFIG_* variables that depend on others set (and verified) above. + +# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled. +ifeq ($(TARGET_OS), libpayload) +ifeq ($(CONFIG_INTERNAL), yes) +ifeq ($(CONFIG_INTERNAL_DMI), no) +UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no +else +override CONFIG_INTERNAL_DMI = yes +endif +endif +endif + +# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode. +CONFIG_INTERNAL_DMI ?= yes + +############################################################################### # Programmer drivers and programmer support infrastructure. # Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below. @@ -446,10 +463,13 @@ FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER=$(CONFIG_DEFAULT_PROGRAMMER)' ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o +PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o ifeq ($(ARCH), x86) PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o -PROGRAMMER_OBJS += ichspi.o ich_descriptors.o +PROGRAMMER_OBJS += ichspi.o ich_descriptors.o dmi.o +ifeq ($(CONFIG_INTERNAL_DMI), yes) +FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1' +endif else endif NEED_PCI := yes diff --git a/board_enable.c b/board_enable.c index 074cabb..59d0380 100644 --- a/board_enable.c +++ b/board_enable.c @@ -2559,6 +2559,7 @@ const static struct board_match *board_match_pci_ids(enum board_match_phase phas } } +#if defined(__i386__) || defined(__x86_64__) if (board->dmi_pattern) { if (!has_dmi_support) { msg_pwarn("Warning: Can't autodetect %s %s, DMI info unavailable.\n", @@ -2571,7 +2572,7 @@ const static struct board_match *board_match_pci_ids(enum board_match_phase phas continue; } } - +#endif // defined(__i386__) || defined(__x86_64__) return board; } diff --git a/dmi.c b/dmi.c index 242889f..d6acb4b 100644 --- a/dmi.c +++ b/dmi.c @@ -1,7 +1,10 @@ /* * This file is part of the flashrom project. * + * Copyright (C) 2000-2002 Alan Cox <alan(a)redhat.com> + * Copyright (C) 2002-2010 Jean Delvare <khali(a)linux-fr.org> * Copyright (C) 2009,2010 Michael Karcher + * Copyright (C) 2011-2013 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,33 +29,28 @@ #include "flash.h" #include "programmer.h" -int has_dmi_support = 0; - -#if STANDALONE +#if defined(__i386__) || defined(__x86_64__) -/* Stub to indicate missing DMI functionality. - * has_dmi_support is 0 by default, so nothing to do here. - * Because dmidecode is not available on all systems, the goal is to implement - * the DMI subset we need directly in this file. - */ -void dmi_init(void) -{ -} +/* Enable SMBIOS decoding. Currently legacy DMI decoding is enough. */ +#define SM_SUPPORT 0 -int dmi_match(const char *pattern) -{ - return 0; -} +/* Strings longer than 4096 in DMI are just insane. */ +#define DMI_MAX_ANSWER_LEN 4096 -#else /* STANDALONE */ +int has_dmi_support = 0; -static const char *dmidecode_names[] = { - "system-manufacturer", - "system-product-name", - "system-version", - "baseboard-manufacturer", - "baseboard-product-name", - "baseboard-version", +static struct { + const char *const keyword; + const uint8_t type; + const uint8_t offset; + char *value; +} dmi_strings[] = { + { "system-manufacturer", 1, 0x04, NULL }, + { "system-product-name", 1, 0x05, NULL }, + { "system-version", 1, 0x06, NULL }, + { "baseboard-manufacturer", 2, 0x04, NULL }, + { "baseboard-product-name", 2, 0x05, NULL }, + { "baseboard-version", 2, 0x06, NULL }, }; /* This list is used to identify supposed laptops. The is_laptop field has the @@ -66,9 +64,9 @@ static const char *dmidecode_names[] = { * The types below are the most common ones. */ static const struct { - unsigned char type; - unsigned char is_laptop; - const char *name; + uint8_t type; + uint8_t is_laptop; + char *name; } dmi_chassis_types[] = { {0x01, 2, "Other"}, {0x02, 2, "Unknown"}, @@ -86,20 +84,206 @@ static const struct { {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ }; -#define DMI_COMMAND_LEN_MAX 260 -static const char *dmidecode_command = "dmidecode"; +#if CONFIG_INTERNAL_DMI == 1 +#ifdef __DJGPP__ /* There is no strnlen in DJGPP. FIXME: Move this to a common utility file. */ +size_t strnlen(const char *str, size_t n) +{ + size_t i; + for (i = 0; i < n && str[i] != '\0'; i++) + ; + return i; +} +#endif -static char *dmistrings[ARRAY_SIZE(dmidecode_names)]; +static bool dmi_checksum(const uint8_t * const buf, size_t len) +{ + uint8_t sum = 0; + size_t a; -/* Strings longer than 4096 in DMI are just insane. */ -#define DMI_MAX_ANSWER_LEN 4096 + for (a = 0; a < len; a++) + sum += buf[a]; + return (sum == 0); +} + +static char *dmi_string(uint8_t *buf, uint8_t string_id, uint8_t *limit) +{ + size_t i, len; + + if (string_id == 0) + return "Not Specified"; + + while (string_id > 1 && string_id--) { + if (buf > limit) { + msg_perr("DMI table is broken (string portion out of bounds)!\n"); + return "<OUT OF BOUNDS>"; + } + buf += strnlen((char *)buf, limit - buf) + 1; + } + + if (!*buf) /* as long as the current byte we're on isn't null */ + return "<BAD INDEX>"; + + len = strnlen((char *)buf, limit - buf); + if (len > DMI_MAX_ANSWER_LEN) + len = DMI_MAX_ANSWER_LEN; + + /* fix junk bytes in the string */ + for (i = 0; i < len; i++) + if (buf[i] < 32 || buf[i] >= 127) + buf[i] = ' '; + + return (char *)buf; +} + +static void dmi_chassis_type(uint8_t code) +{ + int i; + code &= 0x7f; /* bits 6:0 are chassis type, 7th bit is the lock bit */ + is_laptop = 2; + for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { + if (code == dmi_chassis_types[i].type) { + msg_pdbg("DMI string chassis-type: \"%s\"\n", dmi_chassis_types[i].name); + is_laptop = dmi_chassis_types[i].is_laptop; + break; + } + } +} + +static void dmi_table(uint32_t base, uint16_t len, uint16_t num) +{ + int i = 0, j = 0; + + uint8_t *dmi_table_mem = physmap_round("DMI Table", base, len); + if (dmi_table_mem == NULL) { + msg_perr("Unable to access DMI Table\n"); + return; + } + + uint8_t *data = dmi_table_mem; + uint8_t *limit = dmi_table_mem + len; + + /* SMBIOS structure header is always 4 B long and contains: + * - uint8_t type; // see dmi_chassis_types's type + * - uint8_t length; // data section w/ header w/o strings + * - uint16_t handle; + */ + while (i < num && data + 4 <= limit) { + /* - If a short entry is found (less than 4 bytes), not only it + * is invalid, but we cannot reliably locate the next entry. + * - If the length value indicates that this structure spreads + * accross the table border, something is fishy too. + * Better stop at this point, and let the user know his/her + * table is broken. + */ + if (data[1] < 4 || data + data[1] > limit) { + msg_perr("DMI table is broken (bogus header)!\n"); + break; + } + + if(data[0] == 3) { + if (data + 5 <= limit) + dmi_chassis_type(data[5]); + /* else the table is broken, but laptop detection is optional, hence continue. */ + } else + for (j = 0; j < ARRAY_SIZE(dmi_strings); j++) { + uint8_t offset = dmi_strings[j].offset; + uint8_t type = dmi_strings[j].type; + + if (data[0] != type) + continue; + + if (data[1] <= offset || data+offset > limit) { + msg_perr("DMI table is broken (offset out of bounds)!\n"); + goto out; + } + + /* Table will be unmapped, hence fill the struct with duplicated strings. */ + dmi_strings[j].value = strdup(dmi_string(data + data[1], data[offset], limit)); + } + /* Find next structure by skipping data and string sections */ + data += data[1]; + while (data + 1 <= limit) { + if (data[0] == 0 && data[1] == 0) + break; + data++; + } + data += 2; + i++; + } +out: + physunmap(dmi_table_mem, len); +} + +#if SM_SUPPORT +static int smbios_decode(uint8_t *buf) +{ + /* TODO: other checks mentioned in the conformance guidelines? */ + if (!dmi_checksum(buf, buf[0x05]) || + (memcmp(buf + 0x10, "_DMI_", 5) != 0) || + !dmi_checksum(buf + 0x10, 0x0F)) + return 0; + + dmi_table(mmio_readl(buf + 0x18), mmio_readw(buf + 0x16), mmio_readw(buf + 0x1C)); + + return 1; +} +#endif + +static int legacy_decode(uint8_t *buf) +{ + if (!dmi_checksum(buf, 0x0F)) + return 1; + + dmi_table(mmio_readl(buf + 0x08), mmio_readw(buf + 0x06), mmio_readw(buf + 0x0C)); + + return 0; +} + +int dmi_fill(void) +{ + size_t fp; + uint8_t *dmi_mem; + int ret = 1; + + msg_pdbg("Using Internal DMI decoder.\n"); + /* There are two ways specified to gain access to the SMBIOS table: + * - EFI's configuration table contains a pointer to the SMBIOS table. On linux it can be obtained from + * sysfs. EFI's SMBIOS GUID is: {0xeb9d2d31,0x2d88,0x11d3,0x9a,0x16,0x0,0x90,0x27,0x3f,0xc1,0x4d} + * - Scanning physical memory address range 0x000F0000h to 0x000FFFFF for the anchor-string(s). */ + dmi_mem = physmap_try_ro("DMI", 0xF0000, 0x10000); + if (dmi_mem == NULL) + return ret; + + for (fp = 0; fp <= 0xFFF0; fp += 16) { +#if SM_SUPPORT + if (memcmp(dmi_mem + fp, "_SM_", 4) == 0 && fp <= 0xFFE0) { + if (smbios_decode(dmi_mem + fp)) // FIXME: length check + goto out; + } else +#endif + if (memcmp(dmi_mem + fp, "_DMI_", 5) == 0) + if (legacy_decode(dmi_mem + fp) == 0) { + ret = 0; + goto out; + } + } + msg_pinfo("No DMI table found.\n"); +out: + physunmap(dmi_mem, 0x10000); + return ret; +} + +#else /* CONFIG_INTERNAL_DMI */ + +#define DMI_COMMAND_LEN_MAX 300 +static const char *dmidecode_command = "dmidecode"; static char *get_dmi_string(const char *string_name) { FILE *dmidecode_pipe; char *result; char answerbuf[DMI_MAX_ANSWER_LEN]; - char commandline[DMI_COMMAND_LEN_MAX + 40]; + char commandline[DMI_COMMAND_LEN_MAX]; snprintf(commandline, sizeof(commandline), "%s -s %s", dmidecode_command, string_name); @@ -138,46 +322,31 @@ static char *get_dmi_string(const char *string_name) /* Chomp trailing newline. */ if (answerbuf[0] != 0 && answerbuf[strlen(answerbuf) - 1] == '\n') answerbuf[strlen(answerbuf) - 1] = 0; - msg_pdbg("DMI string %s: \"%s\"\n", string_name, answerbuf); result = strdup(answerbuf); - if (!result) + if (result == NULL) msg_pwarn("Warning: Out of memory - DMI support fails"); return result; } -static int dmi_shutdown(void *data) -{ - int i; - for (i = 0; i < ARRAY_SIZE(dmistrings); i++) { - free(dmistrings[i]); - dmistrings[i] = NULL; - } - return 0; -} - -void dmi_init(void) +int dmi_fill(void) { int i; char *chassis_type; - if (register_shutdown(dmi_shutdown, NULL)) - return; - - has_dmi_support = 1; - for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++) { - dmistrings[i] = get_dmi_string(dmidecode_names[i]); - if (!dmistrings[i]) { - has_dmi_support = 0; - return; - } + msg_pdbg("Using External DMI decoder.\n"); + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + dmi_strings[i].value = get_dmi_string(dmi_strings[i].keyword); + if (dmi_strings[i].value == NULL) + return 1; } chassis_type = get_dmi_string("chassis-type"); if (chassis_type == NULL) - return; + return 0; /* chassis-type handling is optional anyway */ + msg_pdbg("DMI string chassis-type: \"%s\"\n", chassis_type); is_laptop = 2; for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) { @@ -185,6 +354,33 @@ void dmi_init(void) break; } } + free(chassis_type); + return 0; +} + +#endif /* CONFIG_INTERNAL_DMI */ + +static int dmi_shutdown(void *data) +{ + int i; + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + free(dmi_strings[i].value); + dmi_strings[i].value = NULL; + } + return 0; +} + +void dmi_init(void) +{ + /* Register shutdown function before we allocate anything. */ + if (register_shutdown(dmi_shutdown, NULL)) { + msg_pwarn("Warning: Could not register DMI shutdown function - continuing without DMI info.\n"); + return; + } + + /* dmi_fill fills the dmi_strings array, and if possible sets the global is_laptop variable. */ + if (dmi_fill() != 0) + return; switch (is_laptop) { case 1: @@ -194,7 +390,13 @@ void dmi_init(void) msg_pdbg("DMI chassis-type is not specific enough.\n"); break; } - free(chassis_type); + + has_dmi_support = 1; + int i; + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { + msg_pdbg("DMI string %s: \"%s\"\n", dmi_strings[i].keyword, + (dmi_strings[i].value == NULL) ? "" : dmi_strings[i].value); + } } /** @@ -252,11 +454,11 @@ int dmi_match(const char *pattern) if (!has_dmi_support) return 0; - for (i = 0; i < ARRAY_SIZE(dmidecode_names); i++) - if (dmi_compare(dmistrings[i], pattern)) + for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) + if (dmi_compare(dmi_strings[i].value, pattern)) return 1; return 0; } -#endif /* STANDALONE */ +#endif // defined(__i386__) || defined(__x86_64__) diff --git a/physmap.c b/physmap.c index 71d9844..9cac868 100644 --- a/physmap.c +++ b/physmap.c @@ -328,6 +328,11 @@ void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len) return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_CLEANUP, PHYSM_ROUND); } +void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len) +{ + return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_ROUND); +} + void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len) { return physmap_common(descr, phys_addr, len, PHYSM_MAYFAIL, PHYSM_RO, PHYSM_NOCLEANUP, PHYSM_EXACT); diff --git a/programmer.h b/programmer.h index f792d9a..ac757b9 100644 --- a/programmer.h +++ b/programmer.h @@ -277,6 +277,7 @@ int processor_flash_enable(void); /* physmap.c */ void *physmap(const char *descr, uintptr_t phys_addr, size_t len); void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len); +void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len); void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len); void physunmap(void *virt_addr, size_t len); #if CONFIG_INTERNAL == 1 @@ -288,9 +289,11 @@ int cb_parse_table(const char **vendor, const char **model); int cb_check_image(uint8_t *bios, int size); /* dmi.c */ +#if defined(__i386__) || defined(__x86_64__) extern int has_dmi_support; void dmi_init(void); int dmi_match(const char *pattern); +#endif // defined(__i386__) || defined(__x86_64__) /* internal.c */ struct superio { -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] Rayer_SPI and xilinx buffered dlc5 cable
by Stefan Tauner 28 Aug '13

28 Aug '13

On Thu, 29 Aug 2013 01:50:44 +1000 Andrew Tarabaras <andytara12(a)gmail.com> wrote: > Pin 6 is connected as in this circuit > > http://dev.ivanov.eu/uploads/images/dlc5/dlc5_schematic3.png > > I think it's been fixed now. I remember being asked to test it a while ago > after some changes to the code and it worked. Yes, Andrew, I am aware of your cable, but I was asking Jakab. The code you tested was not committed upstream yet. I am working on that now and that's the reason why I was asking. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Rayer_SPI and xilinx buffered dlc5 cable
by Stefan Tauner 28 Aug '13

28 Aug '13

On Tue, 26 Feb 2013 11:55:44 +1100 Andrew Tarabaras <andytara12(a)gmail.com> wrote: > Hi, > > Just a heads up that the rayer_spi module wont work with a buffered xilinx > DLC cable. There is a pull down buffer in the MISO ( Data In ) line which > is enabled when pin 6 of the parallel port is pulled low. > > I dont have time to be submitting patches, fix it or not I dont mind. > > These are the changes I made. > […] > > Cheers, hope it will help stop someone else spending hours debugging > something that doesn't work. Hm, I wonder if it ever worked. The original patch was sent to us by Jakab Peter in 2010. Jakab: do you remember flashrom? :) As far as I can see the official documentation of the xilinx cable always mentions the buffer. Do you have a cheap clone or a very old version of the original cable? Eventually I would like to know if pin6 of the printer port is connected to anything in your cable. If not (or if it is even equal to the buffered version and you just forgot to mention that change) we could just disable the pull down by default on the xilinx type and remove the need for another type. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[PATCH 1/5] rayer_spi: Create list of programmer types
by Kyösti Mälkki 28 Aug '13

28 Aug '13

Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- rayer_spi.c | 106 ++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 61 insertions(+), 45 deletions(-) diff --git a/rayer_spi.c b/rayer_spi.c index b312610..b4ef205 100644 --- a/rayer_spi.c +++ b/rayer_spi.c @@ -37,21 +37,48 @@ #include "programmer.h" #include "hwaccess.h" -enum rayer_type { - TYPE_RAYER, - TYPE_XILINX_DLC5, -}; - /* We have two sets of pins, out and in. The numbers for both sets are * independent and are bitshift values, not real pin numbers. * Default settings are for the RayeR hardware. */ -/* Pins for master->slave direction */ -static int rayer_cs_bit = 5; -static int rayer_sck_bit = 6; -static int rayer_mosi_bit = 7; -/* Pins for slave->master direction */ -static int rayer_miso_bit = 6; + +struct rayer_programmer { + const char * type; + const enum test_state status; + const char * description; + const void * private; +}; + +struct rayer_pinout { + int cs_bit; + int sck_bit; + int mosi_bit; + int miso_bit; + void (*preinit)(void *); + int (*shutdown)(void *); +}; + +static struct rayer_pinout rayer_spipgm = { + .cs_bit = 5, + .sck_bit = 6, + .mosi_bit = 7, + .miso_bit = 6, +}; + +static struct rayer_pinout xilinx_dlc5 = { + .cs_bit = 2, + .sck_bit = 1, + .mosi_bit = 0, + .miso_bit = 4, +}; + +struct rayer_programmer rayer_spi_types[] = { + {"rayer", NT, "RayeR SPIPGM", &rayer_spipgm}, + {"xilinx", NT, "Xilinx Parallel Cable III (DLC 5)", &xilinx_dlc5}, + {0}, +}; + +struct rayer_pinout *pinout = NULL; static uint16_t lpt_iobase; @@ -60,22 +87,22 @@ static uint8_t lpt_outbyte; static void rayer_bitbang_set_cs(int val) { - lpt_outbyte &= ~(1 << rayer_cs_bit); - lpt_outbyte |= (val << rayer_cs_bit); + lpt_outbyte &= ~(1 << pinout->cs_bit); + lpt_outbyte |= (val << pinout->cs_bit); OUTB(lpt_outbyte, lpt_iobase); } static void rayer_bitbang_set_sck(int val) { - lpt_outbyte &= ~(1 << rayer_sck_bit); - lpt_outbyte |= (val << rayer_sck_bit); + lpt_outbyte &= ~(1 << pinout->sck_bit); + lpt_outbyte |= (val << pinout->sck_bit); OUTB(lpt_outbyte, lpt_iobase); } static void rayer_bitbang_set_mosi(int val) { - lpt_outbyte &= ~(1 << rayer_mosi_bit); - lpt_outbyte |= (val << rayer_mosi_bit); + lpt_outbyte &= ~(1 << pinout->mosi_bit); + lpt_outbyte |= (val << pinout->mosi_bit); OUTB(lpt_outbyte, lpt_iobase); } @@ -83,8 +110,8 @@ static int rayer_bitbang_get_miso(void) { uint8_t tmp; - tmp = INB(lpt_iobase + 1); - tmp = (tmp >> rayer_miso_bit) & 0x1; + tmp = INB(lpt_iobase + 1) ^ 0x80; // bit.7 inverted + tmp = (tmp >> pinout->miso_bit) & 0x1; return tmp; } @@ -99,8 +126,8 @@ static const struct bitbang_spi_master bitbang_spi_master_rayer = { int rayer_spi_init(void) { + struct rayer_programmer *prog = rayer_spi_types; char *arg = NULL; - enum rayer_type rayer_type = TYPE_RAYER; /* Non-default port requested? */ arg = extract_programmer_param("iobase"); @@ -138,36 +165,20 @@ int rayer_spi_init(void) arg = extract_programmer_param("type"); if (arg) { - if (!strcasecmp(arg, "rayer")) { - rayer_type = TYPE_RAYER; - } else if (!strcasecmp(arg, "xilinx")) { - rayer_type = TYPE_XILINX_DLC5; - } else { + for (; prog->type; ++prog) { + if (! strcasecmp (arg, prog->type)) { + break; + } + } + if(! prog->type) { msg_perr("Error: Invalid device type specified.\n"); free(arg); return 1; } + free(arg); } - free(arg); - switch (rayer_type) { - case TYPE_RAYER: - msg_pdbg("Using RayeR SPIPGM pinout.\n"); - /* Bits for master->slave direction */ - rayer_cs_bit = 5; - rayer_sck_bit = 6; - rayer_mosi_bit = 7; - /* Bits for slave->master direction */ - rayer_miso_bit = 6; - break; - case TYPE_XILINX_DLC5: - msg_pdbg("Using Xilinx Parallel Cable III (DLC 5) pinout.\n"); - /* Bits for master->slave direction */ - rayer_cs_bit = 2; - rayer_sck_bit = 1; - rayer_mosi_bit = 0; - /* Bits for slave->master direction */ - rayer_miso_bit = 4; - } + msg_pinfo("Using %s pinout.\n", prog->description); + pinout = (struct rayer_pinout *) prog->private; if (rget_io_perms()) return 1; @@ -175,6 +186,11 @@ int rayer_spi_init(void) /* Get the initial value before writing to any line. */ lpt_outbyte = INB(lpt_iobase); + if (pinout->shutdown) + register_shutdown(pinout->shutdown, (void*)pinout); + if (pinout->preinit) + pinout->preinit(pinout); + if (bitbang_spi_init(&bitbang_spi_master_rayer)) return 1; -- 1.8.1.1

4 11

Re: [flashrom] [PATCH] libpayload: By default build libflashrom.a instead of flashrom.
by Carl-Daniel Hailfinger 28 Aug '13

28 Aug '13

Am 25.08.2013 03:38 schrieb Stefan Tauner: > flashrom won't built nor run as native payload very soon (or ever). This > patch changes a special GNU make variable that allows to select the default > goal which is taken if no goal is given explicitly on the command line. Normally > this would be the first rule in Makefile, i.e. all. This won't compile if the target > OS is libpayload, hence change it to "libflashrom.a" in that case. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > refined version to make old men happy by not breaking even older build hosts. > > Makefile | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Makefile b/Makefile > index 3b24bc4..b992790 100644 > --- a/Makefile > +++ b/Makefile > @@ -218,6 +218,16 @@ endif > endif > > ifeq ($(TARGET_OS), libpayload) > +# We want to build libflashrom.a by default here. To override the default target we need the special GNU make > +# variable DEFAULT_GOAL which is available since 3.81. To support building on ancient hosts check this first. > +min_version_needed := 3.81 > +ok := $(filter $(min_version_needed), $(firstword $(sort $(MAKE_VERSION) $(min_version_needed)))) This check is broken because the sort is alphabetic, not numeric: Sort results for make 3.81/3.80: 3.80 Sort results for make 3.81/3.81: 3.81 Sort results for make 3.81/3.82: 3.81 Sort results for make 3.81/3.100: 3.100 Writing a reliable make version check can be done in another patch. > +ifneq ($(ok),) > +ifeq ($(MAKECMDGOALS),) > +.DEFAULT_GOAL := libflashrom.a > +$(info Setting default goal to libflashrom.a) > +endif > +endif > FLASHROM_CFLAGS += -DSTANDALONE > ifeq ($(CONFIG_DUMMY), yes) > UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes This patch without the Make version check is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1726 - trunk
by repository service 28 Aug '13

28 Aug '13

Author: stefanct Date: Wed Aug 28 11:55:04 2013 New Revision: 1726 URL: http://flashrom.org/trac/flashrom/changeset/1726 Log: libpayload: By default build libflashrom.a instead of flashrom. flashrom won't build nor run as native payload very soon (or ever). This patch changes a special GNU make variable that allows to select the default goal which is taken if no goal is given explicitly on the command line. Normally this would be the first rule in Makefile, i.e. all. This won't compile if the target OS is libpayload, hence change it to "libflashrom.a" in that case. This requires two not completely ancient GNU make features: - MAKECMDGOALS - .DEFAULT_GOAL Checking for these with ancient-only GNU make features is non-trivial and hereby postponed. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Aug 27 20:02:19 2013 (r1725) +++ trunk/Makefile Wed Aug 28 11:55:04 2013 (r1726) @@ -218,6 +218,10 @@ endif ifeq ($(TARGET_OS), libpayload) +ifeq ($(MAKECMDGOALS),) +.DEFAULT_GOAL := libflashrom.a +$(info Setting default goal to libflashrom.a) +endif FLASHROM_CFLAGS += -DSTANDALONE ifeq ($(CONFIG_DUMMY), yes) UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes

1 0

Re: [flashrom] [PATCH] Add a write granularity of 512 bytes
by Stefan Tauner 27 Aug '13

27 Aug '13

On Thu, 28 Mar 2013 13:18:05 +0100 Mark Marshall <markmarshall14(a)gmail.com> wrote: > I think this is needed for SPI Flash that has a page size of 512. > > I have also changed the loop condition in a few places. If the > length is not a multiple of stride we need to round up the result > of the divide. (Either we need to round up the divide or we should > replace the lines "limit = min(stride, len - i * stride);" with > "limit = stride;". Rounding up the result of the divide seems > to be the correct thing to do.). > > Signed-off-by: Mark Marshall <mark.marshall(a)omicron.at> Obsolete since r1666. Thanks for your effort though :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 4/4] Add support for AT45DB321C.
by Stefan Tauner 27 Aug '13

27 Aug '13

On Sun, 3 Mar 2013 23:57:13 +0100 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > It seems like this model is one-of-a-kind... it shares some properties > with the older versions of the AT45DB series as well as with new ones. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Also self-acked and committed in r1724, in addition to another patch that adds support for AT45CS1282 in r1725. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 3/4] Add support for Atmel AT45DB* chips.
by Stefan Tauner 27 Aug '13

27 Aug '13

On Sun, 3 Mar 2013 23:57:12 +0100 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Signed-off-by: Aidan Thornton <makosoft(a)gmail.com> > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Eventually self-acked and committed in r1723. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom