- flashrom - mail.coreboot.org

Re: [flashrom] [PATCH 2/2] sbxxx: Set SPI clock to 16.5 MHz and disable fast reads.
by Carl-Daniel Hailfinger 15 Sep '13

15 Sep '13

Am 12.09.2013 17:18 schrieb Stefan Tauner: > Do not rely on broken firmware to set up the SPI configuration correctly. > Some boards fail with flashrom because the firmware chose too high speeds > for the alternate SPI mode which flashrom uses. Temporarily change the > clock to the lowest common value of 16.5 MHz. > > Also, disable fast reads just to be safe. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Thanks! One nitpick, otherwise Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > diff --git a/sb600spi.c b/sb600spi.c > index febeabb..91268c0 100644 > --- a/sb600spi.c > +++ b/sb600spi.c > @@ -272,6 +272,62 @@ static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, > return 0; > } > > +struct spispeed { > + const char *const name; > + const int8_t speed; uint8_t instead? That would avoid a type conversion in set_speed(). > +}; > + > +static const struct spispeed spispeeds[] = { > + { "66 MHz", 0x00 }, > + { "33 MHz", 0x01 }, > + { "22 MHz", 0x02 }, > + { "16.5 MHz", 0x03 }, > +}; > + > +static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) > +{ > + bool success = false; > + uint8_t speed = spispeed->speed; > + > + msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); > + if (amd_gen != CHIPSET_YANGTZE) { > + rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); > + success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); > + } > + > + if (!success) { > + msg_perr("Setting SPI clock failed.\n"); > + return 1; > + } > + return 0; > +} Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1750 - trunk
by repository service 15 Sep '13

15 Sep '13

Author: stefanct Date: Sun Sep 15 16:17:39 2013 New Revision: 1750 URL: http://flashrom.org/trac/flashrom/changeset/1750 Log: sbxxx: Set SPI clock to 16.5 MHz and disable fast reads. Do not rely on broken firmware to set up the SPI configuration correctly. Some boards fail with flashrom because the firmware chose too high speeds for the alternate SPI mode which flashrom uses. Temporarily change the clock to the lowest common value of 16.5 MHz. Also, disable fast reads just to be safe. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/sb600spi.c Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Sun Sep 15 16:01:06 2013 (r1749) +++ trunk/sb600spi.c Sun Sep 15 16:17:39 2013 (r1750) @@ -272,6 +272,62 @@ return 0; } +struct spispeed { + const char *const name; + const uint8_t speed; +}; + +static const struct spispeed spispeeds[] = { + { "66 MHz", 0x00 }, + { "33 MHz", 0x01 }, + { "22 MHz", 0x02 }, + { "16.5 MHz", 0x03 }, +}; + +static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) +{ + bool success = false; + uint8_t speed = spispeed->speed; + + msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); + if (amd_gen != CHIPSET_YANGTZE) { + rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); + success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); + } + + if (!success) { + msg_perr("Setting SPI clock failed.\n"); + return 1; + } + return 0; +} + +static int handle_speed(struct pci_dev *dev) +{ + uint32_t tmp; + int8_t spispeed_idx = 3; /* Default to 16.5 MHz */ + + /* See the chipset support matrix for SPI Base_Addr below for an explanation of the symbols used. + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson234 yangtze + * 18 rsvd <- fastReadEnable ? <- ? SpiReadMode[0] + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] + */ + if (amd_gen != CHIPSET_YANGTZE) { + if (amd_gen >= CHIPSET_SB89XX && amd_gen <= CHIPSET_HUDSON234) { + bool fast_read = (mmio_readl(sb600_spibar + 0x00) >> 18) & 0x1; + msg_pdbg("Fast Reads are %sabled\n", fast_read ? "en" : "dis"); + if (fast_read) { + msg_pdbg("Disabling them temporarily.\n"); + rmmio_writel(mmio_readl(sb600_spibar + 0x00) & ~(0x1 << 18), + sb600_spibar + 0x00); + } + } + tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; + msg_pdbg("NormSpeed is %s\n", spispeeds[tmp].name); + } + return set_speed(dev, &spispeeds[spispeed_idx]); +} + static int sb600_handle_imc(struct pci_dev *dev, bool amd_imc_force) { /* Handle IMC everywhere but sb600 which does not have one. */ @@ -322,9 +378,6 @@ uint32_t tmp; uint8_t reg; bool amd_imc_force = false; - static const char *const speed_names[4] = { - "66/reserved", "33", "22", "16.5" - }; char *arg = extract_programmer_param("amd_imc_force"); if (arg && !strcmp(arg, "yes")) { @@ -411,7 +464,7 @@ * See the chipset support matrix for SPI Base_Addr above for an explanation of the symbols used. * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze * 17 rsvd <- <- ? <- ? <- - * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0] + * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0]<1> * 19 SpiArbEnable <- <- ? <- ? <- * 20 (FifoPtrClr) <- <- ? <- ? <- * 21 (FifoPtrInc) <- <- ? <- ? IllegalAccess @@ -420,8 +473,10 @@ * 24:26 ArbWaitCount <- <- ? <- ? <- * 27 SpiBridgeDisable <- <- ? <- ? rsvd * 28 rsvd DropOneClkOnRd = SPIClkGate ? <- ? <- - * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1]<1> * 31 rsvd <- SpiBusy ? <- ? <- + * + * <1> see handle_speed */ tmp = mmio_readl(sb600_spibar + 0x00); msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); @@ -447,9 +502,6 @@ return ERROR_NONFATAL; } - tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; - msg_pdbg("NormSpeed is %s MHz\n", speed_names[tmp]); - if (amd_gen >= CHIPSET_SB89XX) { tmp = mmio_readb(sb600_spibar + 0x1D); msg_pdbg("Using SPI_CS%d\n", tmp & 0x3); @@ -494,6 +546,9 @@ return 0; } + if (handle_speed(dev) != 0) + return ERROR_FATAL; + if (sb600_handle_imc(dev, amd_imc_force) != 0) return ERROR_FATAL;

1 0

Re: [flashrom] [PATCH 1/4] layout: Add a method to cleanup layout data structures.
by Carl-Daniel Hailfinger 15 Sep '13

15 Sep '13

Am 12.09.2013 22:40 schrieb Stefan Tauner: > Add layout_cleanup() to layout.c and hook it up in cli_classic.c. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Not sure if you want to keep that self-ack, but anyway... Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1749 - trunk
by repository service 15 Sep '13

15 Sep '13

Author: stefanct Date: Sun Sep 15 16:01:06 2013 New Revision: 1749 URL: http://flashrom.org/trac/flashrom/changeset/1749 Log: layout: Add a method to cleanup layout data structures. Add layout_cleanup() to layout.c and hook it up in cli_classic.c. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/cli_classic.c trunk/flash.h trunk/layout.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Sun Sep 15 01:37:01 2013 (r1748) +++ trunk/cli_classic.c Sun Sep 15 16:01:06 2013 (r1749) @@ -221,8 +221,6 @@ free(tempstr); cli_classic_abort_usage(); } - /* FIXME: A pointer to the image name is saved in a static array (of size MAX_ROMLAYOUT) - * by register_include_arg() and needs to be freed after processing them. */ break; case 'L': if (++operation_specified > 1) { @@ -527,6 +525,7 @@ for (i = 0; i < chipcount; i++) free(flashes[i].chip); + layout_cleanup(); free(filename); free(layoutfile); free(pparam); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Sep 15 01:37:01 2013 (r1748) +++ trunk/flash.h Sun Sep 15 16:01:06 2013 (r1749) @@ -320,6 +320,7 @@ int process_include_args(void); int read_romlayout(char *name); int handle_romentries(const struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents); +void layout_cleanup(void); /* spi.c */ struct spi_command { Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Sun Sep 15 01:37:01 2013 (r1748) +++ trunk/layout.c Sun Sep 15 16:01:06 2013 (r1749) @@ -3,6 +3,7 @@ * * Copyright (C) 2005-2008 coresystems GmbH * (Written by Stefan Reinauer <stepan(a)coresystems.de> for coresystems GmbH) + * Copyright (C) 2011-2013 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -189,6 +190,21 @@ return 0; } +void layout_cleanup(void) +{ + int i; + for (i = 0; i < num_include_args; i++) { + free(include_args[i]); + include_args[i] = NULL; + } + num_include_args = 0; + + for (i = 0; i < num_rom_entries; i++) { + rom_entries[i].included = 0; + } + num_rom_entries = 0; +} + romentry_t *get_next_included_romentry(unsigned int start) { int i;

1 0

[PATCH] Combine enable_flash_ich_4e() and enable_flash_ich_dc().
by Stefan Tauner 15 Sep '13

15 Sep '13

Putting parameters into function names is not where they belong. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- chipset_enable.c | 76 ++++++++++++++++++++++++-------------------------------- programmer.h | 3 ++- 2 files changed, 34 insertions(+), 45 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index c85db73..00070bd 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -314,15 +314,6 @@ static int enable_flash_ich(struct pci_dev *dev, const char *name, uint8_t bios_ return 0; } -static int enable_flash_ich0(struct pci_dev *dev, const char *name) -{ - internal_buses_supported = BUS_FWH; - /* FIXME: Make this use enable_flash_ich_4e() too and add IDSEL support. Unlike later chipsets, - * ICH and ICH-0 do only support mapping of the top-most 4MB and therefore do only feature - * FWH_DEC_EN (E3h, different default too) and FWH_SEL (E8h). */ - return enable_flash_ich(dev, name, 0x4e); -} - static int enable_flash_ich_fwh_decode(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { uint32_t fwh_conf; @@ -342,6 +333,10 @@ static int enable_flash_ich_fwh_decode(struct pci_dev *dev, const char *name, en fwh_sel2 = 0xee; fwh_dec_en_lo = 0xf0; fwh_dec_en_hi = 0xe3; + } else if (ich_generation == CHIPSET_ICH) { + /* FIXME: Unlike later chipsets, ICH and ICH-0 do only support mapping of the top-most 4MB + * and therefore do only feature FWH_DEC_EN (E3h, different default too) and FWH_SEL (E8h). */ + return 0; } else { msg_perr("Error: FWH decode setting not implemented.\n"); return ERROR_FATAL; @@ -448,7 +443,8 @@ idsel_garbage_out: return 0; } -static int enable_flash_ich_4e(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) +static int enable_flash_ich_fwh(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation, + uint8_t bios_cntl) { int err; @@ -456,48 +452,41 @@ static int enable_flash_ich_4e(struct pci_dev *dev, const char *name, enum ich_c if ((err = enable_flash_ich_fwh_decode(dev, name, ich_generation)) != 0) return err; + /* If we're called by enable_flash_ich_spi, it will override + * internal_buses_supported anyway. + */ internal_buses_supported = BUS_FWH; - return enable_flash_ich(dev, name, 0x4e); + return enable_flash_ich(dev, name, bios_cntl); +} + +static int enable_flash_ich0(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH, 0x4e); } static int enable_flash_ich2(struct pci_dev *dev, const char *name) { - return enable_flash_ich_4e(dev, name, CHIPSET_ICH2); + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH2, 0x4e); } static int enable_flash_ich3(struct pci_dev *dev, const char *name) { - return enable_flash_ich_4e(dev, name, CHIPSET_ICH3); + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH3, 0x4e); } static int enable_flash_ich4(struct pci_dev *dev, const char *name) { - return enable_flash_ich_4e(dev, name, CHIPSET_ICH4); + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH4, 0x4e); } static int enable_flash_ich5(struct pci_dev *dev, const char *name) { - return enable_flash_ich_4e(dev, name, CHIPSET_ICH5); -} - -static int enable_flash_ich_dc(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) -{ - int err; - - /* Configure FWH IDSEL decoder maps. */ - if ((err = enable_flash_ich_fwh_decode(dev, name, ich_generation)) != 0) - return err; - - /* If we're called by enable_flash_ich_dc_spi, it will override - * internal_buses_supported anyway. - */ - internal_buses_supported = BUS_FWH; - return enable_flash_ich(dev, name, 0xdc); + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH5, 0x4e); } static int enable_flash_ich6(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc(dev, name, CHIPSET_ICH6); + return enable_flash_ich_fwh(dev, name, CHIPSET_ICH6, 0xdc); } static int enable_flash_poulsbo(struct pci_dev *dev, const char *name) @@ -565,8 +554,7 @@ static int enable_flash_tunnelcreek(struct pci_dev *dev, const char *name) return ret; } -static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, - enum ich_chipset ich_generation) +static int enable_flash_ich_spi(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { int ret, ret_spi; uint8_t bbs, buc; @@ -619,7 +607,7 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, } /* Enable Flash Writes */ - ret = enable_flash_ich_dc(dev, name, ich_generation); + ret = enable_flash_ich_fwh(dev, name, ich_generation, 0xdc); if (ret == ERROR_FATAL) return ret; @@ -683,58 +671,58 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, static int enable_flash_ich7(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_ICH7); + return enable_flash_ich_spi(dev, name, CHIPSET_ICH7); } static int enable_flash_ich8(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_ICH8); + return enable_flash_ich_spi(dev, name, CHIPSET_ICH8); } static int enable_flash_ich9(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_ICH9); + return enable_flash_ich_spi(dev, name, CHIPSET_ICH9); } static int enable_flash_ich10(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_ICH10); + return enable_flash_ich_spi(dev, name, CHIPSET_ICH10); } /* Ibex Peak aka. 5 series & 3400 series */ static int enable_flash_pch5(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_5_SERIES_IBEX_PEAK); + return enable_flash_ich_spi(dev, name, CHIPSET_5_SERIES_IBEX_PEAK); } /* Cougar Point aka. 6 series & c200 series */ static int enable_flash_pch6(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_6_SERIES_COUGAR_POINT); + return enable_flash_ich_spi(dev, name, CHIPSET_6_SERIES_COUGAR_POINT); } /* Panther Point aka. 7 series */ static int enable_flash_pch7(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_7_SERIES_PANTHER_POINT); + return enable_flash_ich_spi(dev, name, CHIPSET_7_SERIES_PANTHER_POINT); } /* Lynx Point aka. 8 series */ static int enable_flash_pch8(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_8_SERIES_LYNX_POINT); + return enable_flash_ich_spi(dev, name, CHIPSET_8_SERIES_LYNX_POINT); } /* Lynx Point aka. 8 series low-power */ static int enable_flash_pch8_lp(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_8_SERIES_LYNX_POINT_LP); + return enable_flash_ich_spi(dev, name, CHIPSET_8_SERIES_LYNX_POINT_LP); } /* Wellsburg (for Haswell-EP Xeons) */ static int enable_flash_pch8_wb(struct pci_dev *dev, const char *name) { - return enable_flash_ich_dc_spi(dev, name, CHIPSET_8_SERIES_WELLSBURG); + return enable_flash_ich_spi(dev, name, CHIPSET_8_SERIES_WELLSBURG); } static int via_no_byte_merge(struct pci_dev *dev, const char *name) diff --git a/programmer.h b/programmer.h index ef96c9e..187390d 100644 --- a/programmer.h +++ b/programmer.h @@ -557,7 +557,8 @@ int register_spi_programmer(const struct spi_programmer *programmer); /* The following enum is needed by ich_descriptor_tool and ich* code as well as in chipset_enable.c. */ enum ich_chipset { CHIPSET_ICH_UNKNOWN, - CHIPSET_ICH2 = 2, + CHIPSET_ICH = 1, + CHIPSET_ICH2, CHIPSET_ICH3, CHIPSET_ICH4, CHIPSET_ICH5, -- Kind regards, Stefan Tauner

1 0

Large FWH support
by Kyösti Mälkki 15 Sep '13

15 Sep '13

Hi I came across two problems using 2 MiB FWH flash on two different boards with old ICH4 and ICH6 chipsets: First, ICH3/4/5 do not implement fwh_idsel= parameter. If vendor bios had the default map of 1 MiB, it did not even detect 2 MiB flash chips. For this I have patches prepared already. Before: (idsel_failure.txt) Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xbf, id2 0x5c Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content After: (idsel_ok.txt) Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xbf, id2 0x5c Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xbf, id2 0x5c Found SST flash chip "SST49LF016C" (2048 kB, FWH) at physical address 0xffe00000. Second, a board with ICH6 had all except one 512 kiB range of flash disabled by vendor bios and it would not detect 1MiB and 2MiB flash chips. NOTE: the board actually had 512kiB flash for these logs, but you can see where ther problem is. Before: (decode-disabled.txt) 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode disabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled ... Maximum FWH chip size: 0x80000 bytes ... Probing for SST SST49LF008C, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content I used the following as a work-around for ICH6, but this should be derived from fwh_idsel= parameter: $ setpci -s 0:1f.0 0xd8.W=0xf0c0 After: (decode-enabled.txt) 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled Maximum FWH chip size: 0x200000 bytes Regards, Kyösti Mälkki

2 7

[commit] r1748 - trunk
by repository service 15 Sep '13

15 Sep '13

Author: stefanct Date: Sun Sep 15 01:37:01 2013 New Revision: 1748 URL: http://flashrom.org/trac/flashrom/changeset/1748 Log: Enable fwh_idsel parameter for C-ICH and ICH2/3/4/5 chipsets. Register locations are different from ICH6, but otherwise appear to have identical bit specifications and defaults. Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipset_enable.c trunk/flashrom.8.tmpl Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sun Sep 15 01:36:57 2013 (r1747) +++ trunk/chipset_enable.c Sun Sep 15 01:37:01 2013 (r1748) @@ -323,7 +323,7 @@ return enable_flash_ich(dev, name, 0x4e); } -static int enable_flash_ich_fwh_decode(struct pci_dev *dev, const char *name) +static int enable_flash_ich_fwh_decode(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { uint32_t fwh_conf; uint8_t fwh_sel1, fwh_sel2, fwh_dec_en_lo, fwh_dec_en_hi; @@ -332,11 +332,20 @@ int max_decode_fwh_idsel = 0, max_decode_fwh_decode = 0; int contiguous = 1; - /* Register map from ICH6 onwards. */ - fwh_sel1 = 0xd0; - fwh_sel2 = 0xd4; - fwh_dec_en_lo = 0xd8; - fwh_dec_en_hi = 0xd9; + if (ich_generation >= CHIPSET_ICH6) { + fwh_sel1 = 0xd0; + fwh_sel2 = 0xd4; + fwh_dec_en_lo = 0xd8; + fwh_dec_en_hi = 0xd9; + } else if (ich_generation >= CHIPSET_ICH2) { + fwh_sel1 = 0xe8; + fwh_sel2 = 0xee; + fwh_dec_en_lo = 0xf0; + fwh_dec_en_hi = 0xe3; + } else { + msg_perr("Error: FWH decode setting not implemented.\n"); + return ERROR_FATAL; + } idsel = extract_programmer_param("fwh_idsel"); if (idsel && strlen(idsel)) { @@ -441,11 +450,12 @@ static int enable_flash_ich_4e(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { - /* - * Note: ICH5 has registers similar to FWH_SEL1, FWH_SEL2 and - * FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and - * FB_DEC_EN2. - */ + int err; + + /* Configure FWH IDSEL decoder maps. */ + if ((err = enable_flash_ich_fwh_decode(dev, name, ich_generation)) != 0) + return err; + internal_buses_supported = BUS_FWH; return enable_flash_ich(dev, name, 0x4e); } @@ -475,7 +485,7 @@ int err; /* Configure FWH IDSEL decoder maps. */ - if ((err = enable_flash_ich_fwh_decode(dev, name)) != 0) + if ((err = enable_flash_ich_fwh_decode(dev, name, ich_generation)) != 0) return err; /* If we're called by enable_flash_ich_dc_spi, it will override Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Sun Sep 15 01:36:57 2013 (r1747) +++ trunk/flashrom.8.tmpl Sun Sep 15 01:37:01 2013 (r1748) @@ -397,7 +397,7 @@ probably bring it into an inconsistent and unbootable state and we will not provide any support in such a case. .sp -If you have an Intel chipset with an ICH6 or later southbridge and if you want +If you have an Intel chipset with an ICH2 or later southbridge and if you want to set specific IDSEL values for a non-default flash chip or an embedded controller (EC), you can use the .sp

1 0

[commit] r1747 - trunk
by repository service 15 Sep '13

15 Sep '13

Author: stefanct Date: Sun Sep 15 01:36:57 2013 New Revision: 1747 URL: http://flashrom.org/trac/flashrom/changeset/1747 Log: Use ich_generation parameter in enable functions prior to ICH7. Follow the style used from ICH7 onwards to pass ich_generation parameter to lower-level functions on older ICH chipsets too. Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipset_enable.c trunk/programmer.h Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sun Sep 15 01:36:53 2013 (r1746) +++ trunk/chipset_enable.c Sun Sep 15 01:36:57 2013 (r1747) @@ -314,14 +314,12 @@ return 0; } -static int enable_flash_ich_4e(struct pci_dev *dev, const char *name) +static int enable_flash_ich0(struct pci_dev *dev, const char *name) { - /* - * Note: ICH5 has registers similar to FWH_SEL1, FWH_SEL2 and - * FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and - * FB_DEC_EN2. - */ internal_buses_supported = BUS_FWH; + /* FIXME: Make this use enable_flash_ich_4e() too and add IDSEL support. Unlike later chipsets, + * ICH and ICH-0 do only support mapping of the top-most 4MB and therefore do only feature + * FWH_DEC_EN (E3h, different default too) and FWH_SEL (E8h). */ return enable_flash_ich(dev, name, 0x4e); } @@ -441,7 +439,38 @@ return 0; } -static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) +static int enable_flash_ich_4e(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) +{ + /* + * Note: ICH5 has registers similar to FWH_SEL1, FWH_SEL2 and + * FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and + * FB_DEC_EN2. + */ + internal_buses_supported = BUS_FWH; + return enable_flash_ich(dev, name, 0x4e); +} + +static int enable_flash_ich2(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_4e(dev, name, CHIPSET_ICH2); +} + +static int enable_flash_ich3(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_4e(dev, name, CHIPSET_ICH3); +} + +static int enable_flash_ich4(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_4e(dev, name, CHIPSET_ICH4); +} + +static int enable_flash_ich5(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_4e(dev, name, CHIPSET_ICH5); +} + +static int enable_flash_ich_dc(struct pci_dev *dev, const char *name, enum ich_chipset ich_generation) { int err; @@ -456,6 +485,11 @@ return enable_flash_ich(dev, name, 0xdc); } +static int enable_flash_ich6(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_dc(dev, name, CHIPSET_ICH6); +} + static int enable_flash_poulsbo(struct pci_dev *dev, const char *name) { uint16_t old, new; @@ -575,7 +609,7 @@ } /* Enable Flash Writes */ - ret = enable_flash_ich_dc(dev, name); + ret = enable_flash_ich_dc(dev, name, ich_generation); if (ret == ERROR_FATAL) return ret; @@ -1495,21 +1529,21 @@ {0x8086, 0x1e5f, NT, "Intel", "NM70", enable_flash_pch7}, {0x8086, 0x2310, NT, "Intel", "DH89xxCC", enable_flash_pch7}, {0x8086, 0x2390, NT, "Intel", "Coleto Creek", enable_flash_pch7}, - {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, - {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, - {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e}, - {0x8086, 0x244c, OK, "Intel", "ICH2-M", enable_flash_ich_4e}, - {0x8086, 0x2450, NT, "Intel", "C-ICH", enable_flash_ich_4e}, - {0x8086, 0x2480, OK, "Intel", "ICH3-S", enable_flash_ich_4e}, - {0x8086, 0x248c, OK, "Intel", "ICH3-M", enable_flash_ich_4e}, - {0x8086, 0x24c0, OK, "Intel", "ICH4/ICH4-L", enable_flash_ich_4e}, - {0x8086, 0x24cc, OK, "Intel", "ICH4-M", enable_flash_ich_4e}, - {0x8086, 0x24d0, OK, "Intel", "ICH5/ICH5R", enable_flash_ich_4e}, - {0x8086, 0x25a1, OK, "Intel", "6300ESB", enable_flash_ich_4e}, - {0x8086, 0x2640, OK, "Intel", "ICH6/ICH6R", enable_flash_ich_dc}, - {0x8086, 0x2641, OK, "Intel", "ICH6-M", enable_flash_ich_dc}, - {0x8086, 0x2642, NT, "Intel", "ICH6W/ICH6RW", enable_flash_ich_dc}, - {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", enable_flash_ich_dc}, + {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich0}, + {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich0}, + {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich2}, + {0x8086, 0x244c, OK, "Intel", "ICH2-M", enable_flash_ich2}, + {0x8086, 0x2450, NT, "Intel", "C-ICH", enable_flash_ich2}, + {0x8086, 0x2480, OK, "Intel", "ICH3-S", enable_flash_ich3}, + {0x8086, 0x248c, OK, "Intel", "ICH3-M", enable_flash_ich3}, + {0x8086, 0x24c0, OK, "Intel", "ICH4/ICH4-L", enable_flash_ich4}, + {0x8086, 0x24cc, OK, "Intel", "ICH4-M", enable_flash_ich4}, + {0x8086, 0x24d0, OK, "Intel", "ICH5/ICH5R", enable_flash_ich5}, + {0x8086, 0x25a1, OK, "Intel", "6300ESB", enable_flash_ich5}, + {0x8086, 0x2640, OK, "Intel", "ICH6/ICH6R", enable_flash_ich6}, + {0x8086, 0x2641, OK, "Intel", "ICH6-M", enable_flash_ich6}, + {0x8086, 0x2642, NT, "Intel", "ICH6W/ICH6RW", enable_flash_ich6}, + {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", enable_flash_ich6}, {0x8086, 0x27b0, OK, "Intel", "ICH7DH", enable_flash_ich7}, {0x8086, 0x27b8, OK, "Intel", "ICH7/ICH7R", enable_flash_ich7}, {0x8086, 0x27b9, OK, "Intel", "ICH7M", enable_flash_ich7}, Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sun Sep 15 01:36:53 2013 (r1746) +++ trunk/programmer.h Sun Sep 15 01:36:57 2013 (r1747) @@ -554,10 +554,15 @@ int default_spi_write_aai(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int register_spi_programmer(const struct spi_programmer *programmer); -/* The following enum is needed by ich_descriptor_tool and ich* code. */ +/* The following enum is needed by ich_descriptor_tool and ich* code as well as in chipset_enable.c. */ enum ich_chipset { CHIPSET_ICH_UNKNOWN, - CHIPSET_ICH7 = 7, + CHIPSET_ICH2 = 2, + CHIPSET_ICH3, + CHIPSET_ICH4, + CHIPSET_ICH5, + CHIPSET_ICH6, + CHIPSET_ICH7, CHIPSET_ICH8, CHIPSET_ICH9, CHIPSET_ICH10,

1 0

[commit] r1746 - trunk
by repository service 15 Sep '13

15 Sep '13

Author: stefanct Date: Sun Sep 15 01:36:53 2013 New Revision: 1746 URL: http://flashrom.org/trac/flashrom/changeset/1746 Log: Introduce enable_flash_ich_fwh_decode(). ICH2 (and C-ICH)/3/4/5 also have FWH_SEL1/2 registers but at different addresses. In preparation for implementing fwh_idsel parsing for older ICH chipsets extract the parameter handling and add variables for the offsets. While FWH_DEC_EN1 is a 16bit register for ICH6, it is two separate 8bit registers on ICH5 and earlier. Implement all accesses with two byte instructions instead, to prepare for extended support. Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sat Sep 14 11:02:27 2013 (r1745) +++ trunk/chipset_enable.c Sun Sep 15 01:36:53 2013 (r1746) @@ -325,14 +325,21 @@ return enable_flash_ich(dev, name, 0x4e); } -static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) +static int enable_flash_ich_fwh_decode(struct pci_dev *dev, const char *name) { uint32_t fwh_conf; + uint8_t fwh_sel1, fwh_sel2, fwh_dec_en_lo, fwh_dec_en_hi; int i, tmp; char *idsel = NULL; int max_decode_fwh_idsel = 0, max_decode_fwh_decode = 0; int contiguous = 1; + /* Register map from ICH6 onwards. */ + fwh_sel1 = 0xd0; + fwh_sel2 = 0xd4; + fwh_dec_en_lo = 0xd8; + fwh_dec_en_hi = 0xd9; + idsel = extract_programmer_param("fwh_idsel"); if (idsel && strlen(idsel)) { uint64_t fwh_idsel_old, fwh_idsel; @@ -349,14 +356,14 @@ "unused bits set.\n"); goto idsel_garbage_out; } - fwh_idsel_old = pci_read_long(dev, 0xd0); + fwh_idsel_old = pci_read_long(dev, fwh_sel1); fwh_idsel_old <<= 16; - fwh_idsel_old |= pci_read_word(dev, 0xd4); + fwh_idsel_old |= pci_read_word(dev, fwh_sel2); msg_pdbg("\nSetting IDSEL from 0x%012" PRIx64 " to " "0x%012" PRIx64 " for top 16 MB.", fwh_idsel_old, fwh_idsel); - rpci_write_long(dev, 0xd0, (fwh_idsel >> 16) & 0xffffffff); - rpci_write_word(dev, 0xd4, fwh_idsel & 0xffff); + rpci_write_long(dev, fwh_sel1, (fwh_idsel >> 16) & 0xffffffff); + rpci_write_word(dev, fwh_sel2, fwh_idsel & 0xffff); /* FIXME: Decode settings are not changed. */ } else if (idsel) { msg_perr("Error: fwh_idsel= specified, but no value given.\n"); @@ -372,7 +379,7 @@ * have to be adjusted. */ /* FWH_SEL1 */ - fwh_conf = pci_read_long(dev, 0xd0); + fwh_conf = pci_read_long(dev, fwh_sel1); for (i = 7; i >= 0; i--) { tmp = (fwh_conf >> (i * 4)) & 0xf; msg_pdbg("\n0x%08x/0x%08x FWH IDSEL: 0x%x", @@ -386,7 +393,7 @@ } } /* FWH_SEL2 */ - fwh_conf = pci_read_word(dev, 0xd4); + fwh_conf = pci_read_word(dev, fwh_sel2); for (i = 3; i >= 0; i--) { tmp = (fwh_conf >> (i * 4)) & 0xf; msg_pdbg("\n0x%08x/0x%08x FWH IDSEL: 0x%x", @@ -401,7 +408,9 @@ } contiguous = 1; /* FWH_DEC_EN1 */ - fwh_conf = pci_read_word(dev, 0xd8); + fwh_conf = pci_read_byte(dev, fwh_dec_en_hi); + fwh_conf <<= 8; + fwh_conf |= pci_read_byte(dev, fwh_dec_en_lo); for (i = 7; i >= 0; i--) { tmp = (fwh_conf >> (i + 0x8)) & 0x1; msg_pdbg("\n0x%08x/0x%08x FWH decode %sabled", @@ -429,6 +438,17 @@ max_rom_decode.fwh = min(max_decode_fwh_idsel, max_decode_fwh_decode); msg_pdbg("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh); + return 0; +} + +static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) +{ + int err; + + /* Configure FWH IDSEL decoder maps. */ + if ((err = enable_flash_ich_fwh_decode(dev, name)) != 0) + return err; + /* If we're called by enable_flash_ich_dc_spi, it will override * internal_buses_supported anyway. */

1 0

[PATCH] CONFIG_DEFAULT setting
by Carl-Daniel Hailfinger 14 Sep '13

14 Sep '13

Allow easy disabling of all programmers except selected ones by setting CONFIG_DEFAULT=no. Setting CONFIG_DEFAULT=yes has no effect. Usage example: # make CONFIG_DUMMY=yes CONFIG_NIC3COM=yes CONFIG_DEFAULT=no This will disable all programmers except dummy and nic3com. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-Makefile_config_default/Makefile =================================================================== --- flashrom-Makefile_config_default/Makefile (Revision 1623) +++ flashrom-Makefile_config_default/Makefile (Arbeitskopie) @@ -52,6 +52,10 @@ # Compilation will fail for unspecified values. CONFIG_DEFAULT_PROGRAMMER ?= PROGRAMMER_INVALID +# This parameter picks the default setting for CONFIG_ variables of programmers not specified explicitly +# on the command line. +CONFIG_DEFAULT ?= yes + # If your compiler spits out excessive warnings, run make WARNERROR=no # You shouldn't have to change this flag. WARNERROR ?= yes @@ -322,65 +326,65 @@ SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"' # Always enable internal/onboard support for now. -CONFIG_INTERNAL ?= yes +CONFIG_INTERNAL ?= $(CONFIG_DEFAULT) # Always enable serprog for now. Needs to be disabled on Windows. -CONFIG_SERPROG ?= yes +CONFIG_SERPROG ?= $(CONFIG_DEFAULT) # RayeR SPIPGM hardware support -CONFIG_RAYER_SPI ?= yes +CONFIG_RAYER_SPI ?= $(CONFIG_DEFAULT) # PonyProg2000 SPI hardware support -CONFIG_PONY_SPI ?= yes +CONFIG_PONY_SPI ?= $(CONFIG_DEFAULT) # Always enable 3Com NICs for now. -CONFIG_NIC3COM ?= yes +CONFIG_NIC3COM ?= $(CONFIG_DEFAULT) # Enable NVIDIA graphics cards. Note: write and erase do not work properly. -CONFIG_GFXNVIDIA ?= yes +CONFIG_GFXNVIDIA ?= $(CONFIG_DEFAULT) # Always enable SiI SATA controllers for now. -CONFIG_SATASII ?= yes +CONFIG_SATASII ?= $(CONFIG_DEFAULT) # Highpoint (HPT) ATA/RAID controller support. # IMPORTANT: This code is not yet working! CONFIG_ATAHPT ?= no # Always enable FT2232 SPI dongles for now. -CONFIG_FT2232_SPI ?= yes +CONFIG_FT2232_SPI ?= $(CONFIG_DEFAULT) # Always enable dummy tracing for now. -CONFIG_DUMMY ?= yes +CONFIG_DUMMY ?= $(CONFIG_DEFAULT) # Always enable Dr. Kaiser for now. -CONFIG_DRKAISER ?= yes +CONFIG_DRKAISER ?= $(CONFIG_DEFAULT) # Always enable Realtek NICs for now. -CONFIG_NICREALTEK ?= yes +CONFIG_NICREALTEK ?= $(CONFIG_DEFAULT) # Disable National Semiconductor NICs until support is complete and tested. CONFIG_NICNATSEMI ?= no # Always enable Intel NICs for now. -CONFIG_NICINTEL ?= yes +CONFIG_NICINTEL ?= $(CONFIG_DEFAULT) # Always enable SPI on Intel NICs for now. -CONFIG_NICINTEL_SPI ?= yes +CONFIG_NICINTEL_SPI ?= $(CONFIG_DEFAULT) # Always enable SPI on OGP cards for now. -CONFIG_OGP_SPI ?= yes +CONFIG_OGP_SPI ?= $(CONFIG_DEFAULT) # Always enable Bus Pirate SPI for now. -CONFIG_BUSPIRATE_SPI ?= yes +CONFIG_BUSPIRATE_SPI ?= $(CONFIG_DEFAULT) # Disable Dediprog SF100 until support is complete and tested. CONFIG_DEDIPROG ?= no # Always enable Marvell SATA controllers for now. -CONFIG_SATAMV ?= yes +CONFIG_SATAMV ?= $(CONFIG_DEFAULT) # Enable Linux spidev interface by default. We disable it on non-Linux targets. -CONFIG_LINUX_SPI ?= yes +CONFIG_LINUX_SPI ?= $(CONFIG_DEFAULT) # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no -- http://www.hailfinger.org/

2 2

[PATCH] Remove exit call from physmap_common
by Niklas Söderlund 14 Sep '13

14 Sep '13

Only call path where exit is reached is from physmap(). Callers of physmap() that where not prepared to handle the ERROR_PTR return value have been handled. Signed-off-by: Niklas Söderlund <niso(a)kth.se> --- chipset_enable.c | 6 ++++++ drkaiser.c | 2 ++ gfxnvidia.c | 2 ++ ichspi.c | 2 ++ it85spi.c | 2 ++ mcp6x_spi.c | 2 ++ nicintel_spi.c | 2 ++ ogp_spi.c | 2 ++ physmap.c | 12 +++--------- satasii.c | 2 ++ sb600spi.c | 2 ++ 11 files changed, 27 insertions(+), 9 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index fa79511..b1738ea 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -494,6 +494,8 @@ static int enable_flash_tunnelcreek(struct pci_dev *dev, const char *name) /* Map RCBA to virtual memory */ rcrb = physmap("ICH RCRB", tmp, 0x4000); + if (rcrb == ERROR_PTR) + return ERROR_FATAL; /* Test Boot BIOS Strap Status */ bnt = mmio_readl(rcrb + 0x3410); @@ -565,6 +567,8 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, /* Map RCBA to virtual memory */ rcrb = physmap("ICH RCRB", tmp, 0x4000); + if (rcrb == ERROR_PTR) + return ERROR_FATAL; gcs = mmio_readl(rcrb + 0x3410); msg_pdbg("GCS = 0x%x: ", gcs); @@ -1235,6 +1239,8 @@ static int get_flashbase_sc520(struct pci_dev *dev, const char *name) /* 1. Map MMCR */ mmcr = physmap("Elan SC520 MMCR", 0xfffef000, getpagesize()); + if (mmcr == ERROR_PTR) + return -1; /* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for * BOOTCS region (PARx[31:29] = 100b)e diff --git a/drkaiser.c b/drkaiser.c index 83b8b3d..71981e8 100644 --- a/drkaiser.c +++ b/drkaiser.c @@ -82,6 +82,8 @@ int drkaiser_init(void) /* Map 128kB flash memory window. */ drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", addr, DRKAISER_MEMMAP_SIZE); + if (drkaiser_bar == ERROR_PTR) + return 1; if (register_shutdown(drkaiser_shutdown, NULL)) return 1; diff --git a/gfxnvidia.c b/gfxnvidia.c index 9232677..9600675 100644 --- a/gfxnvidia.c +++ b/gfxnvidia.c @@ -102,6 +102,8 @@ int gfxnvidia_init(void) msg_pinfo("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr); nvidia_bar = physmap("NVIDIA", io_base_addr, GFXNVIDIA_MEMMAP_SIZE); + if (nvidia_bar == ERROR_PTR) + return 1; /* Must be done before rpci calls. */ if (register_shutdown(gfxnvidia_shutdown, NULL)) diff --git a/ichspi.c b/ichspi.c index bbe2b06..f6b77ad 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1836,6 +1836,8 @@ int via_init_spi(struct pci_dev *dev, uint32_t mmio_base) int i; ich_spibar = physmap("VIA SPI MMIO registers", mmio_base, 0x70); + if (ich_spibar == ERROR_PTR) + return ERROR_FATAL; /* Do we really need no write enable? Like the LPC one at D17F0 0x40 */ /* Not sure if it speaks all these bus protocols. */ diff --git a/it85spi.c b/it85spi.c index 0b074eb..e15a287 100644 --- a/it85spi.c +++ b/it85spi.c @@ -262,6 +262,8 @@ static int it85xx_spi_common_init(struct superio s) * Major TODO here, and it will be a lot of work. */ base = (chipaddr)physmap("it85 communication", 0xFFFFF000, 0x1000); + if (base == ERROR_PTR) + return 1; msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__, (unsigned int)base); ce_high = (unsigned char *)(base + 0xE00); /* 0xFFFFFE00 */ diff --git a/mcp6x_spi.c b/mcp6x_spi.c index ac40557..438e661 100644 --- a/mcp6x_spi.c +++ b/mcp6x_spi.c @@ -149,6 +149,8 @@ int mcp6x_spi_init(int want_spi) } /* Map the BAR. Bytewise/wordwise access at 0x530 and 0x540. */ mcp6x_spibar = physmap("NVIDIA MCP6x SPI", mcp6x_spibaraddr, 0x544); + if (mcp6x_spibar == ERROR_PTR) + return 1; #if 0 /* FIXME: Run the physunmap in a shutdown function. */ diff --git a/nicintel_spi.c b/nicintel_spi.c index 72b470b..6dc40f5 100644 --- a/nicintel_spi.c +++ b/nicintel_spi.c @@ -178,6 +178,8 @@ int nicintel_spi_init(void) nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash", io_base_addr, MEMMAP_SIZE); + if (nicintel_spibar == ERROR_PTR) + return 1; /* Automatic restore of EECD on shutdown is not possible because EECD * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED, * but other bits with side effects as well. Those other bits must be diff --git a/ogp_spi.c b/ogp_spi.c index 9b596bf..b3963c2 100644 --- a/ogp_spi.c +++ b/ogp_spi.c @@ -138,6 +138,8 @@ int ogp_spi_init(void) return 1; ogp_spibar = physmap("OGP registers", io_base_addr, 4096); + if (ogp_spibar == ERROR_PTR) + return 1; if (register_shutdown(ogp_spi_shutdown, NULL)) return 1; diff --git a/physmap.c b/physmap.c index adce315..35dcfb8 100644 --- a/physmap.c +++ b/physmap.c @@ -211,13 +211,11 @@ void physunmap(void *virt_addr, size_t len) } #endif -#define PHYSMAP_NOFAIL 0 -#define PHYSMAP_MAYFAIL 1 #define PHYSMAP_RW 0 #define PHYSMAP_RO 1 static void *physmap_common(const char *descr, unsigned long phys_addr, - size_t len, int mayfail, int readonly) + size_t len, int readonly) { void *virt_addr; @@ -261,8 +259,6 @@ static void *physmap_common(const char *descr, unsigned long phys_addr, "and reboot, or reboot into\n" "single user mode.\n"); #endif - if (!mayfail) - exit(3); } return virt_addr; @@ -270,14 +266,12 @@ static void *physmap_common(const char *descr, unsigned long phys_addr, void *physmap(const char *descr, unsigned long phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSMAP_NOFAIL, - PHYSMAP_RW); + return physmap_common(descr, phys_addr, len, PHYSMAP_RW); } void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSMAP_MAYFAIL, - PHYSMAP_RO); + return physmap_common(descr, phys_addr, len, PHYSMAP_RO); } #if defined(__i386__) || defined(__x86_64__) diff --git a/satasii.c b/satasii.c index 838fff4..9f9bb7f 100644 --- a/satasii.c +++ b/satasii.c @@ -97,6 +97,8 @@ int satasii_init(void) } sii_bar = physmap("SATA SiI registers", addr, SATASII_MEMMAP_SIZE) + reg_offset; + if (sii_bar == ERROR_PTR) + return 1; /* Check if ROM cycle are OK. */ if ((id != 0x0680) && (!(pci_mmio_readl(sii_bar) & (1 << 26)))) diff --git a/sb600spi.c b/sb600spi.c index fe60aa9..a4ca20b 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -226,6 +226,8 @@ int sb600_probe_spi(struct pci_dev *dev) /* Physical memory has to be mapped at page (4k) boundaries. */ sb600_spibar = physmap("SB600 SPI registers", tmp & 0xfffff000, 0x1000); + if (sb600_spibar == ERROR_PTR) + return ERROR_FATAL; /* The low bits of the SPI base address are used as offset into * the mapped page. */ -- 1.7.12.4

2 1

[commit] r1745 - trunk
by repository service 14 Sep '13

14 Sep '13

Author: stefanct Date: Sat Sep 14 11:02:27 2013 New Revision: 1745 URL: http://flashrom.org/trac/flashrom/changeset/1745 Log: Remove exit call and mayfail parameter from physmap_common(). The only call path where exit was reached was from physmap functions. Callers of physmap() et al. which were not prepared to handle ERROR_PTR return values have been adjusted. physmap_try_ro() has been renamed to physmap_ro() and physmap_common() slightly refactored due to the now removed *FAIL parameters. Signed-off-by: Niklas Söderlund <niso(a)kth.se> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/cbtable.c trunk/chipset_enable.c trunk/dmi.c trunk/nicintel_spi.c trunk/physmap.c trunk/programmer.h trunk/sb600spi.c Modified: trunk/cbtable.c ============================================================================== --- trunk/cbtable.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/cbtable.c Sat Sep 14 11:02:27 2013 (r1745) @@ -261,7 +261,7 @@ #else start = 0x0; #endif - table_area = physmap_try_ro("low megabyte", start, BYTES_TO_MAP - start); + table_area = physmap_ro("low megabyte", start, BYTES_TO_MAP - start); if (ERROR_PTR == table_area) { msg_perr("Failed getting access to coreboot low tables.\n"); return -1; @@ -277,7 +277,7 @@ start = forward->forward; start &= ~(getpagesize() - 1); physunmap(table_area, BYTES_TO_MAP); - table_area = physmap_try_ro("high tables", start, BYTES_TO_MAP); + table_area = physmap_ro("high tables", start, BYTES_TO_MAP); if (ERROR_PTR == table_area) { msg_perr("Failed getting access to coreboot high tables.\n"); return -1; Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/chipset_enable.c Sat Sep 14 11:02:27 2013 (r1745) @@ -482,7 +482,7 @@ /* Map RCBA to virtual memory */ rcrb = rphysmap("ICH RCRB", tmp, 0x4000); if (rcrb == ERROR_PTR) - return 1; + return ERROR_FATAL; /* Test Boot BIOS Strap Status */ bnt = mmio_readl(rcrb + 0x3410); @@ -566,7 +566,7 @@ /* Map RCBA to virtual memory */ rcrb = rphysmap("ICH RCRB", tmp, 0x4000); if (rcrb == ERROR_PTR) - return 1; + return ERROR_FATAL; gcs = mmio_readl(rcrb + 0x3410); msg_pdbg("GCS = 0x%x: ", gcs); @@ -1289,6 +1289,8 @@ /* 1. Map MMCR */ mmcr = physmap("Elan SC520 MMCR", 0xfffef000, getpagesize()); + if (mmcr == ERROR_PTR) + return ERROR_FATAL; /* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for * BOOTCS region (PARx[31:29] = 100b)e Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/dmi.c Sat Sep 14 11:02:27 2013 (r1745) @@ -250,8 +250,8 @@ * - EFI's configuration table contains a pointer to the SMBIOS table. On linux it can be obtained from * sysfs. EFI's SMBIOS GUID is: {0xeb9d2d31,0x2d88,0x11d3,0x9a,0x16,0x0,0x90,0x27,0x3f,0xc1,0x4d} * - Scanning physical memory address range 0x000F0000h to 0x000FFFFF for the anchor-string(s). */ - dmi_mem = physmap_try_ro("DMI", 0xF0000, 0x10000); - if (dmi_mem == NULL) + dmi_mem = physmap_ro("DMI", 0xF0000, 0x10000); + if (dmi_mem == ERROR_PTR) return ret; for (fp = 0; fp <= 0xFFF0; fp += 16) { Modified: trunk/nicintel_spi.c ============================================================================== --- trunk/nicintel_spi.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/nicintel_spi.c Sat Sep 14 11:02:27 2013 (r1745) @@ -177,6 +177,9 @@ return 1; nicintel_spibar = rphysmap("Intel Gigabit NIC w/ SPI flash", io_base_addr, MEMMAP_SIZE); + if (nicintel_spibar == ERROR_PTR) + return 1; + /* Automatic restore of EECD on shutdown is not possible because EECD * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED, * but other bits with side effects as well. Those other bits must be Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/physmap.c Sat Sep 14 11:02:27 2013 (r1745) @@ -203,8 +203,6 @@ } #endif -#define PHYSM_NOFAIL 0 -#define PHYSM_MAYFAIL 1 #define PHYSM_RW 0 #define PHYSM_RO 1 #define PHYSM_NOCLEANUP 0 @@ -249,8 +247,8 @@ return 0; } -static void *physmap_common(const char *descr, uintptr_t phys_addr, size_t len, bool mayfail, - bool readonly, bool autocleanup, bool round) +static void *physmap_common(const char *descr, uintptr_t phys_addr, size_t len, bool readonly, bool autocleanup, + bool round) { void *virt_addr; uintptr_t offset = 0; @@ -287,53 +285,47 @@ "and reboot, or reboot into\n" "single user mode.\n"); #endif - if (mayfail) - return ERROR_PTR; - else - exit(3); + return ERROR_PTR; } if (autocleanup) { struct undo_physmap_data *d = malloc(sizeof(struct undo_physmap_data)); if (d == NULL) { msg_perr("%s: Out of memory!\n", __func__); - goto unmap_out; + physunmap(virt_addr, len); + return ERROR_PTR; } d->virt_addr = virt_addr; d->len = len; if (register_shutdown(undo_physmap, d) != 0) { msg_perr("%s: Could not register shutdown function!\n", __func__); - goto unmap_out; + physunmap(virt_addr, len); + return ERROR_PTR; } } return virt_addr + offset; -unmap_out: - physunmap(virt_addr, len); - if (!mayfail) - exit(3); - return ERROR_PTR; } void *physmap(const char *descr, uintptr_t phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_EXACT); + return physmap_common(descr, phys_addr, len, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_EXACT); } void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_CLEANUP, PHYSM_ROUND); + return physmap_common(descr, phys_addr, len, PHYSM_RW, PHYSM_CLEANUP, PHYSM_ROUND); } void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSM_NOFAIL, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_ROUND); + return physmap_common(descr, phys_addr, len, PHYSM_RW, PHYSM_NOCLEANUP, PHYSM_ROUND); } -void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len) +void *physmap_ro(const char *descr, uintptr_t phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSM_MAYFAIL, PHYSM_RO, PHYSM_NOCLEANUP, PHYSM_EXACT); + return physmap_common(descr, phys_addr, len, PHYSM_RO, PHYSM_NOCLEANUP, PHYSM_EXACT); } /* MSR abstraction implementations for Linux, OpenBSD, FreeBSD/Dragonfly, OSX, libpayload Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/programmer.h Sat Sep 14 11:02:27 2013 (r1745) @@ -278,7 +278,7 @@ void *physmap(const char *descr, uintptr_t phys_addr, size_t len); void *rphysmap(const char *descr, uintptr_t phys_addr, size_t len); void *physmap_round(const char *descr, uintptr_t phys_addr, size_t len); -void *physmap_try_ro(const char *descr, uintptr_t phys_addr, size_t len); +void *physmap_ro(const char *descr, uintptr_t phys_addr, size_t len); void physunmap(void *virt_addr, size_t len); #if CONFIG_INTERNAL == 1 int setup_cpu_msr(int cpu); Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Fri Sep 13 21:19:25 2013 (r1744) +++ trunk/sb600spi.c Sat Sep 14 11:02:27 2013 (r1745) @@ -353,7 +353,7 @@ /* Physical memory has to be mapped at page (4k) boundaries. */ sb600_spibar = rphysmap("SB600 SPI registers", tmp & 0xfffff000, 0x1000); if (sb600_spibar == ERROR_PTR) - return 1; + return ERROR_FATAL; /* The low bits of the SPI base address are used as offset into * the mapped page.

1 0

[PATCH] Remove exit call from sys_physmap_*
by Niklas Söderlund 13 Sep '13

13 Sep '13

All callers are prepared to handle error if ERROR_PTR is returned. Signed-off-by: Niklas Söderlund <niso(a)kth.se> --- physmap.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/physmap.c b/physmap.c index 5aa9874..adce315 100644 --- a/physmap.c +++ b/physmap.c @@ -173,12 +173,11 @@ static void *sys_physmap_rw_uncached(unsigned long phys_addr, size_t len) /* Open the memory device UNCACHED. Important for MMIO. */ if (-1 == (fd_mem = open(MEM_DEV, O_RDWR | O_SYNC))) { perror("Critical error: open(" MEM_DEV ")"); - exit(2); + return ERROR_PTR; } } - virt_addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, - fd_mem, (off_t)phys_addr); + virt_addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, fd_mem, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } @@ -192,14 +191,12 @@ static void *sys_physmap_ro_cached(unsigned long phys_addr, size_t len) if (-1 == fd_mem_cached) { /* Open the memory device CACHED. */ if (-1 == (fd_mem_cached = open(MEM_DEV, O_RDWR))) { - msg_perr("Critical error: open(" MEM_DEV "): %s", - strerror(errno)); - exit(2); + msg_perr("Critical error: open(" MEM_DEV "): %s", strerror(errno)); + return ERROR_PTR; } } - virt_addr = mmap(NULL, len, PROT_READ, MAP_SHARED, - fd_mem_cached, (off_t)phys_addr); + virt_addr = mmap(NULL, len, PROT_READ, MAP_SHARED, fd_mem_cached, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } @@ -209,7 +206,7 @@ void physunmap(void *virt_addr, size_t len) msg_pspew("Not unmapping zero size at %p\n", virt_addr); return; } - + munmap(virt_addr, len); } #endif -- 1.7.12.3

2 1

[commit] r1744 - trunk
by repository service 13 Sep '13

13 Sep '13

Author: stefanct Date: Fri Sep 13 21:19:25 2013 New Revision: 1744 URL: http://flashrom.org/trac/flashrom/changeset/1744 Log: Remove exit call from sys_physmap_*. All callers are prepared to handle error if ERROR_PTR is returned. The Manpage mentioning the respective return code is readapted. Signed-off-by: Niklas Söderlund <niso(a)kth.se> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.8.tmpl trunk/physmap.c Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Fri Sep 13 19:21:05 2013 (r1743) +++ trunk/flashrom.8.tmpl Fri Sep 13 21:19:25 2013 (r1744) @@ -857,8 +857,7 @@ .B BUGS for contact info. .SH EXIT STATUS -flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem -(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails. +flashrom exits with 0 on success, 1 on most failures but with 3 if a call to mmap() fails. .SH REQUIREMENTS flashrom needs different access permissions for different programmers. .sp Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Fri Sep 13 19:21:05 2013 (r1743) +++ trunk/physmap.c Fri Sep 13 21:19:25 2013 (r1744) @@ -165,12 +165,11 @@ /* Open the memory device UNCACHED. Important for MMIO. */ if (-1 == (fd_mem = open(MEM_DEV, O_RDWR | O_SYNC))) { msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); - exit(2); + return ERROR_PTR; } } - virt_addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, - fd_mem, (off_t)phys_addr); + virt_addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, fd_mem, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } @@ -185,12 +184,11 @@ /* Open the memory device CACHED. */ if (-1 == (fd_mem_cached = open(MEM_DEV, O_RDWR))) { msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); - exit(2); + return ERROR_PTR; } } - virt_addr = mmap(NULL, len, PROT_READ, MAP_SHARED, - fd_mem_cached, (off_t)phys_addr); + virt_addr = mmap(NULL, len, PROT_READ, MAP_SHARED, fd_mem_cached, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } @@ -200,7 +198,7 @@ msg_pspew("Not unmapping zero size at %p\n", virt_addr); return; } - + munmap(virt_addr, len); } #endif

1 0

help
by dan 13 Sep '13

13 Sep '13

trying to fix dead motherboard after failed bios update. flashrom found chip but it is stuck on "reading old flash chip contents..." just hung, won't go any further, or error out. Does this mean my bios chip is fried?

2 1

[commit] r1743 - trunk
by repository service 13 Sep '13

13 Sep '13

Author: stefanct Date: Fri Sep 13 19:21:05 2013 New Revision: 1743 URL: http://flashrom.org/trac/flashrom/changeset/1743 Log: Add debug output to programmer_map_flash_region(). While we don't expect addresses with more than 32 bits here, let's print the whole possible range for debugging anyway. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Sep 12 17:48:39 2013 (r1742) +++ trunk/flashrom.c Fri Sep 13 19:21:05 2013 (r1743) @@ -432,8 +432,10 @@ void *programmer_map_flash_region(const char *descr, uintptr_t phys_addr, size_t len) { - return programmer_table[programmer].map_flash_region(descr, - phys_addr, len); + void *ret = programmer_table[programmer].map_flash_region(descr, phys_addr, len); + msg_gspew("%s: mapping %s from 0x%0*" PRIxPTR " to 0x%0*" PRIxPTR "\n", + __func__, descr, PRIxPTR_WIDTH, phys_addr, PRIxPTR_WIDTH, (uintptr_t) ret); + return ret; } void programmer_unmap_flash_region(void *virt_addr, size_t len)

1 0

Report: Hasee A24CR 208 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/Hasee A24CR 208.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 447M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1013 us, 10000 myus = 10104 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Hasee Computer Co., Ltd." DMI string system-product-name: "PAF4" DMI string system-version: "1.0 " DMI string baseboard-manufacturer: "Hasee Computer Co., Ltd." DMI string baseboard-product-name: "A24CR" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Notebook" Laptop detected via DMI. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 02. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: ASUSTeK P8H77-M LE 1302 write
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/rf/fll101j10jn3g_jssc8f5j4m0000gn/T/DPCI5I9V5p.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 480M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1132 us, 10000 myus = 10759 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8H77-M LE" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel H77" with PCI ID 8086:1e4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x2a: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on H77 failed. New value is 0x2a. Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0180 FREG1: BIOS region (0x00180000-0x007fffff) is read-write. 0x5C: 0x017f0001 FREG2: Management Engine region (0x00001000-0x0017ffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0180 FLREG2 0x017f0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:S, 0x201000-0x201fff:S, 0x202000-0x202fff:S, 0x203000-0x203fff:S, 0x204000-0x204fff:S, 0x205000-0x205fff:S, 0x206000-0x206fff:S, 0x207000-0x207fff:S, 0x208000-0x208fff:S, 0x209000-0x209fff:S, 0x20a000-0x20afff:S, 0x20b000-0x20bfff:S, 0x20c000-0x20cfff:S, 0x20d000-0x20dfff:S, 0x20e000-0x20efff:S, 0x20f000-0x20ffff:S, 0x210000-0x210fff:S, 0x211000-0x211fff:S, 0x212000-0x212fff:S, 0x213000-0x213fff:S, 0x214000-0x214fff:S, 0x215000-0x215fff:S, 0x216000-0x216fff:S, 0x217000-0x217fff:S, 0x218000-0x218fff:S, 0x219000-0x219fff:S, 0x21a000-0x21afff:S, 0x21b000-0x21bfff:S, 0x21c000-0x21cfff:S, 0x21d000-0x21dfff:S, 0x21e000-0x21efff:S, 0x21f000-0x21ffff:S, 0x220000-0x220fff:S, 0x221000-0x221fff:S, 0x222000-0x222fff:S, 0x223000-0x223fff:S, 0x224000-0x224fff:S, 0x225000-0x225fff:S, 0x226000-0x226fff:S, 0x227000-0x227fff:S, 0x228000-0x228fff:S, 0x229000-0x229fff:S, 0x22a000-0x22afff:S, 0x22b000-0x22bfff:S, 0x22c000-0x22cfff:S, 0x22d000-0x22dfff:S, 0x22e000-0x22efff:S, 0x22f000-0x22ffff:S, 0x230000-0x230fff:S, 0x231000-0x231fff:S, 0x232000-0x232fff:S, 0x233000-0x233fff:S, 0x234000-0x234fff:S, 0x235000-0x235fff:S, 0x236000-0x236fff:S, 0x237000-0x237fff:S, 0x238000-0x238fff:S, 0x239000-0x239fff:S, 0x23a000-0x23afff:S, 0x23b000-0x23bfff:S, 0x23c000-0x23cfff:S, 0x23d000-0x23dfff:S, 0x23e000-0x23efff:S, 0x23f000-0x23ffff:S, 0x240000-0x240fff:S, 0x241000-0x241fff:S, 0x242000-0x242fff:S, 0x243000-0x243fff:S, 0x244000-0x244fff:S, 0x245000-0x245fff:S, 0x246000-0x246fff:S, 0x247000-0x247fff:S, 0x248000-0x248fff:S, 0x249000-0x249fff:S, 0x24a000-0x24afff:S, 0x24b000-0x24bfff:S, 0x24c000-0x24cfff:S, 0x24d000-0x24dfff:S, 0x24e000-0x24efff:S, 0x24f000-0x24ffff:S, 0x250000-0x250fff:S, 0x251000-0x251fff:S, 0x252000-0x252fff:S, 0x253000-0x253fff:S, 0x254000-0x254fff:S, 0x255000-0x255fff:S, 0x256000-0x256fff:S, 0x257000-0x257fff:S, 0x258000-0x258fff:S, 0x259000-0x259fff:S, 0x25a000-0x25afff:S, 0x25b000-0x25bfff:S, 0x25c000-0x25cfff:S, 0x25d000-0x25dfff:S, 0x25e000-0x25efff:S, 0x25f000-0x25ffff:S, 0x260000-0x260fff:S, 0x261000-0x261fff:S, 0x262000-0x262fff:S, 0x263000-0x263fff:S, 0x264000-0x264fff:S, 0x265000-0x265fff:S, 0x266000-0x266fff:S, 0x267000-0x267fff:S, 0x268000-0x268fff:S, 0x269000-0x269fff:S, 0x26a000-0x26afff:S, 0x26b000-0x26bfff:S, 0x26c000-0x26cfff:S, 0x26d000-0x26dfff:S, 0x26e000-0x26efff:S, 0x26f000-0x26ffff:S, 0x270000-0x270fff:S, 0x271000-0x271fff:S, 0x272000-0x272fff:S, 0x273000-0x273fff:S, 0x274000-0x274fff:S, 0x275000-0x275fff:S, 0x276000-0x276fff:S, 0x277000-0x277fff:S, 0x278000-0x278fff:S, 0x279000-0x279fff:S, 0x27a000-0x27afff:S, 0x27b000-0x27bfff:S, 0x27c000-0x27cfff:S, 0x27d000-0x27dfff:S, 0x27e000-0x27efff:S, 0x27f000-0x27ffff:S, 0x280000-0x280fff:S, 0x281000-0x281fff:S, 0x282000-0x282fff:S, 0x283000-0x283fff:S, 0x284000-0x284fff:S, 0x285000-0x285fff:S, 0x286000-0x286fff:S, 0x287000-0x287fff:S, 0x288000-0x288fff:S, 0x289000-0x289fff:S, 0x28a000-0x28afff:S, 0x28b000-0x28bfff:S, 0x28c000-0x28cfff:S, 0x28d000-0x28dfff:S, 0x28e000-0x28efff:S, 0x28f000-0x28ffff:S, 0x290000-0x290fff:S, 0x291000-0x291fff:S, 0x292000-0x292fff:S, 0x293000-0x293fff:S, 0x294000-0x294fff:S, 0x295000-0x295fff:S, 0x296000-0x296fff:S, 0x297000-0x297fff:S, 0x298000-0x298fff:S, 0x299000-0x299fff:S, 0x29a000-0x29afff:S, 0x29b000-0x29bfff:S, 0x29c000-0x29cfff:S, 0x29d000-0x29dfff:S, 0x29e000-0x29efff:S, 0x29f000-0x29ffff:S, 0x2a0000-0x2a0fff:S, 0x2a1000-0x2a1fff:S, 0x2a2000-0x2a2fff:S, 0x2a3000-0x2a3fff:S, 0x2a4000-0x2a4fff:S, 0x2a5000-0x2a5fff:S, 0x2a6000-0x2a6fff:S, 0x2a7000-0x2a7fff:S, 0x2a8000-0x2a8fff:S, 0x2a9000-0x2a9fff:S, 0x2aa000-0x2aafff:S, 0x2ab000-0x2abfff:S, 0x2ac000-0x2acfff:S, 0x2ad000-0x2adfff:S, 0x2ae000-0x2aefff:S, 0x2af000-0x2affff:S, 0x2b0000-0x2b0fff:S, 0x2b1000-0x2b1fff:S, 0x2b2000-0x2b2fff:S, 0x2b3000-0x2b3fff:S, 0x2b4000-0x2b4fff:S, 0x2b5000-0x2b5fff:S, 0x2b6000-0x2b6fff:S, 0x2b7000-0x2b7fff:S, 0x2b8000-0x2b8fff:S, 0x2b9000-0x2b9fff:S, 0x2ba000-0x2bafff:S, 0x2bb000-0x2bbfff:S, 0x2bc000-0x2bcfff:S, 0x2bd000-0x2bdfff:S, 0x2be000-0x2befff:S, 0x2bf000-0x2bffff:S, 0x2c0000-0x2c0fff:S, 0x2c1000-0x2c1fff:S, 0x2c2000-0x2c2fff:S, 0x2c3000-0x2c3fff:S, 0x2c4000-0x2c4fff:S, 0x2c5000-0x2c5fff:S, 0x2c6000-0x2c6fff:S, 0x2c7000-0x2c7fff:S, 0x2c8000-0x2c8fff:S, 0x2c9000-0x2c9fff:S, 0x2ca000-0x2cafff:S, 0x2cb000-0x2cbfff:S, 0x2cc000-0x2ccfff:S, 0x2cd000-0x2cdfff:S, 0x2ce000-0x2cefff:S, 0x2cf000-0x2cffff:S, 0x2d0000-0x2d0fff:S, 0x2d1000-0x2d1fff:S, 0x2d2000-0x2d2fff:S, 0x2d3000-0x2d3fff:S, 0x2d4000-0x2d4fff:S, 0x2d5000-0x2d5fff:S, 0x2d6000-0x2d6fff:S, 0x2d7000-0x2d7fff:S, 0x2d8000-0x2d8fff:S, 0x2d9000-0x2d9fff:S, 0x2da000-0x2dafff:S, 0x2db000-0x2dbfff:S, 0x2dc000-0x2dcfff:S, 0x2dd000-0x2ddfff:S, 0x2de000-0x2defff:S, 0x2df000-0x2dffff:S, 0x2e0000-0x2e0fff:S, 0x2e1000-0x2e1fff:S, 0x2e2000-0x2e2fff:S, 0x2e3000-0x2e3fff:S, 0x2e4000-0x2e4fff:S, 0x2e5000-0x2e5fff:S, 0x2e6000-0x2e6fff:S, 0x2e7000-0x2e7fff:S, 0x2e8000-0x2e8fff:S, 0x2e9000-0x2e9fff:S, 0x2ea000-0x2eafff:S, 0x2eb000-0x2ebfff:S, 0x2ec000-0x2ecfff:S, 0x2ed000-0x2edfff:S, 0x2ee000-0x2eefff:S, 0x2ef000-0x2effff:S, 0x2f0000-0x2f0fff:S, 0x2f1000-0x2f1fff:S, 0x2f2000-0x2f2fff:S, 0x2f3000-0x2f3fff:S, 0x2f4000-0x2f4fff:S, 0x2f5000-0x2f5fff:S, 0x2f6000-0x2f6fff:S, 0x2f7000-0x2f7fff:S, 0x2f8000-0x2f8fff:S, 0x2f9000-0x2f9fff:S, 0x2fa000-0x2fafff:S, 0x2fb000-0x2fbfff:S, 0x2fc000-0x2fcfff:S, 0x2fd000-0x2fdfff:S, 0x2fe000-0x2fefff:S, 0x2ff000-0x2fffff:S, 0x300000-0x300fff:S, 0x301000-0x301fff:S, 0x302000-0x302fff:S, 0x303000-0x303fff:S, 0x304000-0x304fff:S, 0x305000-0x305fff:S, 0x306000-0x306fff:S, 0x307000-0x307fff:S, 0x308000-0x308fff:S, 0x309000-0x309fff:S, 0x30a000-0x30afff:S, 0x30b000-0x30bfff:S, 0x30c000-0x30cfff:S, 0x30d000-0x30dfff:S, 0x30e000-0x30efff:S, 0x30f000-0x30ffff:S, 0x310000-0x310fff:S, 0x311000-0x311fff:S, 0x312000-0x312fff:S, 0x313000-0x313fff:S, 0x314000-0x314fff:S, 0x315000-0x315fff:S, 0x316000-0x316fff:S, 0x317000-0x317fff:S, 0x318000-0x318fff:S, 0x319000-0x319fff:S, 0x31a000-0x31afff:S, 0x31b000-0x31bfff:S, 0x31c000-0x31cfff:S, 0x31d000-0x31dfff:S, 0x31e000-0x31efff:S, 0x31f000-0x31ffff:S, 0x320000-0x320fff:S, 0x321000-0x321fff:S, 0x322000-0x322fff:S, 0x323000-0x323fff:S, 0x324000-0x324fff:S, 0x325000-0x325fff:S, 0x326000-0x326fff:S, 0x327000-0x327fff:S, 0x328000-0x328fff:S, 0x329000-0x329fff:S, 0x32a000-0x32afff:S, 0x32b000-0x32bfff:S, 0x32c000-0x32cfff:S, 0x32d000-0x32dfff:S, 0x32e000-0x32efff:S, 0x32f000-0x32ffff:S, 0x330000-0x330fff:S, 0x331000-0x331fff:S, 0x332000-0x332fff:S, 0x333000-0x333fff:S, 0x334000-0x334fff:S, 0x335000-0x335fff:S, 0x336000-0x336fff:S, 0x337000-0x337fff:S, 0x338000-0x338fff:S, 0x339000-0x339fff:S, 0x33a000-0x33afff:S, 0x33b000-0x33bfff:S, 0x33c000-0x33cfff:S, 0x33d000-0x33dfff:S, 0x33e000-0x33efff:S, 0x33f000-0x33ffff:S, 0x340000-0x340fff:S, 0x341000-0x341fff:S, 0x342000-0x342fff:S, 0x343000-0x343fff:S, 0x344000-0x344fff:S, 0x345000-0x345fff:S, 0x346000-0x346fff:S, 0x347000-0x347fff:S, 0x348000-0x348fff:S, 0x349000-0x349fff:S, 0x34a000-0x34afff:S, 0x34b000-0x34bfff:S, 0x34c000-0x34cfff:S, 0x34d000-0x34dfff:S, 0x34e000-0x34efff:S, 0x34f000-0x34ffff:S, 0x350000-0x350fff:S, 0x351000-0x351fff:S, 0x352000-0x352fff:S, 0x353000-0x353fff:S, 0x354000-0x354fff:S, 0x355000-0x355fff:S, 0x356000-0x356fff:S, 0x357000-0x357fff:S, 0x358000-0x358fff:S, 0x359000-0x359fff:S, 0x35a000-0x35afff:S, 0x35b000-0x35bfff:S, 0x35c000-0x35cfff:S, 0x35d000-0x35dfff:S, 0x35e000-0x35efff:S, 0x35f000-0x35ffff:S, 0x360000-0x360fff:S, 0x361000-0x361fff:S, 0x362000-0x362fff:S, 0x363000-0x363fff:S, 0x364000-0x364fff:S, 0x365000-0x365fff:S, 0x366000-0x366fff:S, 0x367000-0x367fff:S, 0x368000-0x368fff:S, 0x369000-0x369fff:S, 0x36a000-0x36afff:S, 0x36b000-0x36bfff:S, 0x36c000-0x36cfff:S, 0x36d000-0x36dfff:S, 0x36e000-0x36efff:S, 0x36f000-0x36ffff:S, 0x370000-0x370fff:S, 0x371000-0x371fff:S, 0x372000-0x372fff:S, 0x373000-0x373fff:S, 0x374000-0x374fff:S, 0x375000-0x375fff:S, 0x376000-0x376fff:S, 0x377000-0x377fff:S, 0x378000-0x378fff:S, 0x379000-0x379fff:S, 0x37a000-0x37afff:S, 0x37b000-0x37bfff:S, 0x37c000-0x37cfff:S, 0x37d000-0x37dfff:S, 0x37e000-0x37efff:S, 0x37f000-0x37ffff:S, 0x380000-0x380fff:S, 0x381000-0x381fff:S, 0x382000-0x382fff:S, 0x383000-0x383fff:S, 0x384000-0x384fff:S, 0x385000-0x385fff:S, 0x386000-0x386fff:S, 0x387000-0x387fff:S, 0x388000-0x388fff:S, 0x389000-0x389fff:S, 0x38a000-0x38afff:S, 0x38b000-0x38bfff:S, 0x38c000-0x38cfff:S, 0x38d000-0x38dfff:S, 0x38e000-0x38efff:S, 0x38f000-0x38ffff:S, 0x390000-0x390fff:S, 0x391000-0x391fff:S, 0x392000-0x392fff:S, 0x393000-0x393fff:S, 0x394000-0x394fff:S, 0x395000-0x395fff:S, 0x396000-0x396fff:S, 0x397000-0x397fff:S, 0x398000-0x398fff:S, 0x399000-0x399fff:S, 0x39a000-0x39afff:S, 0x39b000-0x39bfff:S, 0x39c000-0x39cfff:S, 0x39d000-0x39dfff:S, 0x39e000-0x39efff:S, 0x39f000-0x39ffff:S, 0x3a0000-0x3a0fff:S, 0x3a1000-0x3a1fff:S, 0x3a2000-0x3a2fff:S, 0x3a3000-0x3a3fff:S, 0x3a4000-0x3a4fff:S, 0x3a5000-0x3a5fff:S, 0x3a6000-0x3a6fff:S, 0x3a7000-0x3a7fff:S, 0x3a8000-0x3a8fff:S, 0x3a9000-0x3a9fff:S, 0x3aa000-0x3aafff:S, 0x3ab000-0x3abfff:S, 0x3ac000-0x3acfff:S, 0x3ad000-0x3adfff:S, 0x3ae000-0x3aefff:S, 0x3af000-0x3affff:S, 0x3b0000-0x3b0fff:S, 0x3b1000-0x3b1fff:S, 0x3b2000-0x3b2fff:S, 0x3b3000-0x3b3fff:S, 0x3b4000-0x3b4fff:S, 0x3b5000-0x3b5fff:S, 0x3b6000-0x3b6fff:S, 0x3b7000-0x3b7fff:S, 0x3b8000-0x3b8fff:S, 0x3b9000-0x3b9fff:S, 0x3ba000-0x3bafff:S, 0x3bb000-0x3bbfff:S, 0x3bc000-0x3bcfff:S, 0x3bd000-0x3bdfff:S, 0x3be000-0x3befff:S, 0x3bf000-0x3bffff:S, 0x3c0000-0x3c0fff:S, 0x3c1000-0x3c1fff:S, 0x3c2000-0x3c2fff:S, 0x3c3000-0x3c3fff:S, 0x3c4000-0x3c4fff:S, 0x3c5000-0x3c5fff:S, 0x3c6000-0x3c6fff:S, 0x3c7000-0x3c7fff:S, 0x3c8000-0x3c8fff:S, 0x3c9000-0x3c9fff:S, 0x3ca000-0x3cafff:S, 0x3cb000-0x3cbfff:S, 0x3cc000-0x3ccfff:S, 0x3cd000-0x3cdfff:S, 0x3ce000-0x3cefff:S, 0x3cf000-0x3cffff:S, 0x3d0000-0x3d0fff:S, 0x3d1000-0x3d1fff:S, 0x3d2000-0x3d2fff:S, 0x3d3000-0x3d3fff:S, 0x3d4000-0x3d4fff:S, 0x3d5000-0x3d5fff:S, 0x3d6000-0x3d6fff:S, 0x3d7000-0x3d7fff:S, 0x3d8000-0x3d8fff:S, 0x3d9000-0x3d9fff:S, 0x3da000-0x3dafff:S, 0x3db000-0x3dbfff:S, 0x3dc000-0x3dcfff:S, 0x3dd000-0x3ddfff:S, 0x3de000-0x3defff:S, 0x3df000-0x3dffff:S, 0x3e0000-0x3e0fff:S, 0x3e1000-0x3e1fff:S, 0x3e2000-0x3e2fff:S, 0x3e3000-0x3e3fff:S, 0x3e4000-0x3e4fff:S, 0x3e5000-0x3e5fff:S, 0x3e6000-0x3e6fff:S, 0x3e7000-0x3e7fff:S, 0x3e8000-0x3e8fff:S, 0x3e9000-0x3e9fff:S, 0x3ea000-0x3eafff:S, 0x3eb000-0x3ebfff:S, 0x3ec000-0x3ecfff:S, 0x3ed000-0x3edfff:S, 0x3ee000-0x3eefff:S, 0x3ef000-0x3effff:S, 0x3f0000-0x3f0fff:S, 0x3f1000-0x3f1fff:S, 0x3f2000-0x3f2fff:S, 0x3f3000-0x3f3fff:S, 0x3f4000-0x3f4fff:S, 0x3f5000-0x3f5fff:S, 0x3f6000-0x3f6fff:S, 0x3f7000-0x3f7fff:S, 0x3f8000-0x3f8fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=1 Running OPCODE 0x20 failed at address 0x3f8000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x3f8000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:S, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S, 0x020000-0x027fff:S, 0x028000-0x02ffff:S, 0x030000-0x037fff:S, 0x038000-0x03ffff:S, 0x040000-0x047fff:S, 0x048000-0x04ffff:S, 0x050000-0x057fff:S, 0x058000-0x05ffff:S, 0x060000-0x067fff:S, 0x068000-0x06ffff:S, 0x070000-0x077fff:S, 0x078000-0x07ffff:S, 0x080000-0x087fff:S, 0x088000-0x08ffff:S, 0x090000-0x097fff:S, 0x098000-0x09ffff:S, 0x0a0000-0x0a7fff:S, 0x0a8000-0x0affff:S, 0x0b0000-0x0b7fff:S, 0x0b8000-0x0bffff:S, 0x0c0000-0x0c7fff:S, 0x0c8000-0x0cffff:S, 0x0d0000-0x0d7fff:S, 0x0d8000-0x0dffff:S, 0x0e0000-0x0e7fff:S, 0x0e8000-0x0effff:S, 0x0f0000-0x0f7fff:S, 0x0f8000-0x0fffff:S, 0x100000-0x107fff:S, 0x108000-0x10ffff:S, 0x110000-0x117fff:S, 0x118000-0x11ffff:S, 0x120000-0x127fff:S, 0x128000-0x12ffff:S, 0x130000-0x137fff:S, 0x138000-0x13ffff:S, 0x140000-0x147fff:S, 0x148000-0x14ffff:S, 0x150000-0x157fff:S, 0x158000-0x15ffff:S, 0x160000-0x167fff:S, 0x168000-0x16ffff:S, 0x170000-0x177fff:S, 0x178000-0x17ffff:S, 0x180000-0x187fff:S, 0x188000-0x18ffff:S, 0x190000-0x197fff:S, 0x198000-0x19ffff:S, 0x1a0000-0x1a7fff:S, 0x1a8000-0x1affff:S, 0x1b0000-0x1b7fff:S, 0x1b8000-0x1bffff:S, 0x1c0000-0x1c7fff:S, 0x1c8000-0x1cffff:S, 0x1d0000-0x1d7fff:S, 0x1d8000-0x1dffff:S, 0x1e0000-0x1e7fff:S, 0x1e8000-0x1effff:S, 0x1f0000-0x1f7fff:S, 0x1f8000-0x1fffff:S, 0x200000-0x207fff:S, 0x208000-0x20ffff:S, 0x210000-0x217fff:S, 0x218000-0x21ffff:S, 0x220000-0x227fff:S, 0x228000-0x22ffff:S, 0x230000-0x237fff:S, 0x238000-0x23ffff:S, 0x240000-0x247fff:S, 0x248000-0x24ffff:S, 0x250000-0x257fff:S, 0x258000-0x25ffff:S, 0x260000-0x267fff:S, 0x268000-0x26ffff:S, 0x270000-0x277fff:S, 0x278000-0x27ffff:S, 0x280000-0x287fff:S, 0x288000-0x28ffff:S, 0x290000-0x297fff:S, 0x298000-0x29ffff:S, 0x2a0000-0x2a7fff:S, 0x2a8000-0x2affff:S, 0x2b0000-0x2b7fff:S, 0x2b8000-0x2bffff:S, 0x2c0000-0x2c7fff:S, 0x2c8000-0x2cffff:S, 0x2d0000-0x2d7fff:S, 0x2d8000-0x2dffff:S, 0x2e0000-0x2e7fff:S, 0x2e8000-0x2effff:S, 0x2f0000-0x2f7fff:S, 0x2f8000-0x2fffff:S, 0x300000-0x307fff:S, 0x308000-0x30ffff:S, 0x310000-0x317fff:S, 0x318000-0x31ffff:S, 0x320000-0x327fff:S, 0x328000-0x32ffff:S, 0x330000-0x337fff:S, 0x338000-0x33ffff:S, 0x340000-0x347fff:S, 0x348000-0x34ffff:S, 0x350000-0x357fff:S, 0x358000-0x35ffff:S, 0x360000-0x367fff:S, 0x368000-0x36ffff:S, 0x370000-0x377fff:S, 0x378000-0x37ffff:S, 0x380000-0x387fff:S, 0x388000-0x38ffff:S, 0x390000-0x397fff:S, 0x398000-0x39ffff:S, 0x3a0000-0x3a7fff:S, 0x3a8000-0x3affff:S, 0x3b0000-0x3b7fff:S, 0x3b8000-0x3bffff:S, 0x3c0000-0x3c7fff:S, 0x3c8000-0x3cffff:S, 0x3d0000-0x3d7fff:S, 0x3d8000-0x3dffff:S, 0x3e0000-0x3e7fff:S, 0x3e8000-0x3effff:S, 0x3f0000-0x3f7fff:S, 0x3f8000-0x3fffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_52 failed during command execution at address 0x3f8000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:S, 0x210000-0x21ffff:S, 0x220000-0x22ffff:S, 0x230000-0x23ffff:S, 0x240000-0x24ffff:S, 0x250000-0x25ffff:S, 0x260000-0x26ffff:S, 0x270000-0x27ffff:S, 0x280000-0x28ffff:S, 0x290000-0x29ffff:S, 0x2a0000-0x2affff:S, 0x2b0000-0x2bffff:S, 0x2c0000-0x2cffff:S, 0x2d0000-0x2dffff:S, 0x2e0000-0x2effff:S, 0x2f0000-0x2fffff:S, 0x300000-0x30ffff:S, 0x310000-0x31ffff:S, 0x320000-0x32ffff:S, 0x330000-0x33ffff:S, 0x340000-0x34ffff:S, 0x350000-0x35ffff:S, 0x360000-0x36ffff:S, 0x370000-0x37ffff:S, 0x380000-0x38ffff:S, 0x390000-0x39ffff:S, 0x3a0000-0x3affff:S, 0x3b0000-0x3bffff:S, 0x3c0000-0x3cffff:S, 0x3d0000-0x3dffff:S, 0x3e0000-0x3effff:S, 0x3f0000-0x3fffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_d8 failed during command execution at address 0x3f0000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. Restoring MMIO space at 0x104ed18a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASUSTeK CM6650 0802 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_Lion/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/k5/xnc1lsq94d52crlx3jwmn9dm0000gn/T/DPCI0gAqAq.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 442M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1004 us, 10000 myus = 10149 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "ASUSTeK Computer INC." DMI string system-product-name: "CM6650" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "CM6650" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0xd8, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x90, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x9f, read w/o addr, none op[7]: 0xc7, write w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00183b6e (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: Warning: Management Engine region (0x00001000-0x0017ffff) is locked. 0x60: 0x00000fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00000fff FREG4: Platform Data region is unused. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=1 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300023 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0180 FLREG2 0x017f0001 FLREG3 0x00000fff FLREG4 0x00000fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x003fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512, 64 kB: program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190 on-the-fly OPCODE (0x15) re-programmed, op-pos=2 probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512(A), 64 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res3: id1 0x1515, id2 0x15 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1515, id2 0x15 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) at physical address 0xffc00000. Chip status register is 0x00. Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 SFDP revision = 1.1 SFDP number of parameter headers is 1 (NPH = 0). SFDP parameter table header 0/0: ID 0xef, version 1.0 Length 16 B, Parameter Table Pointer 0x000080 ID of the mandatory JEDEC SFDP parameter table is not 0 as demanded by JESD216 (warning only). Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 4096 kB. Block eraser 0: 1024 x 4096 B with opcode 0x20 It seems like this chip supports the preliminary Intel version of SFDP, skipping processing of double words 3-9. done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x8f, id2 0x9b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x8f, id2 0x9b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x03, id2 0xe7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32.V" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x10d6c08a0 Restoring MMIO space at 0x10d6c089c Restoring MMIO space at 0x10d6c0898 Restoring MMIO space at 0x10d6c0896 Restoring MMIO space at 0x10d6c0894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASRock Z77 Extreme4-M P1.50 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/lz/nrf8lcyx5js0rl_djchq0tqh0000gn/T/DPCIrJu56s.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 487M loops per second, 10 myus = 9 us, 100 myus = 112 us, 1000 myus = 1024 us, 10000 myus = 10448 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "Z77 Extreme4-M" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00203856 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Warning: Management Engine region (0x00001000-0x001fffff) is locked. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x49300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0200 FLREG2 0x01ff0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00200000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xc3, id2 0x55, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x1014138a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: Gigabyte Q77M-D2H F2 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Documents/Gigabyte Q77M-D2H F2.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 482M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1039 us, 10000 myus = 10482 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "Q77M-D2H" DMI string baseboard-version: "x.x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel Q77" with PCI ID 8086:1e47. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0500 FREG1: BIOS region (0x00500000-0x007fffff) is read-write. 0x5C: 0x04ff0003 FREG2: Management Engine region (0x00003000-0x004fffff) is read-write. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf94130 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=3, DBC=1, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x03040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 4 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0500 FLREG2 0x04ff0003 FLREG3 0x00020001 FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00500000 - 0x007fffff Region 2 (ME ) 0x00003000 - 0x004fffff Region 3 (GbE ) 0x00001000 - 0x00002fff Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, OK. Super I/O ID 0x8728 is not on the list of flash capable controllers. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6445E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E" Please specify which chip definition to use with the -c <chipname> option. Restoring MMIO space at 0x10a8fc8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: ASRock Z77 OC Formula P2.30 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML - ááµáá³áá¦á·ááªá¨ááµá«/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/xz/8qzmbll53cg9b674cxdygh6h0000gn/T/DPCI4CEkdt.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 711M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1011 us, 10000 myus = 9987 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "Z77 OC Formula" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x0020fc2f (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Warning: Management Engine region (0x00001000-0x001fffff) is locked. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xfc4010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x64900024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 50 MHz Write and Erase Clock Freq.: 50 MHz Fast Read is supported. Fast Read Clock Frequency: 50 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0200 FLREG2 0x01ff0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00200000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x01, id2 0xe3, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x01, id2 0xe3, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x80, id2 0xfb, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=4 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x1075468a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: Gigabyte Z77-D3H F21 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/Gigabyte Z77-D3H F21.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 443M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus = 10201 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "Z77-D3H" DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0000 FREG1: BIOS region (0x00000000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf94130 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=3, DBC=1, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0000 FLREG2 0x01ff0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00000000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, OK. Super I/O ID 0x8728 is not on the list of flash capable controllers. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6445E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E" Please specify which chip definition to use with the -c <chipname> option. Restoring MMIO space at 0x10a9fd8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Emergency: ASUSTeK P8Z77-M 2003 write
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/hr/kdhrqkv52fz78sp6_ysnp5bc0000gn/T/DPCINdLcsp.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 114M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 997 us, 10000 myus = 9842 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8Z77-M" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel Z77" with PCI ID 8086:1e44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x2a: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on Z77 failed. New value is 0x2a. Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0180 FREG1: BIOS region (0x00180000-0x007fffff) is read-write. 0x5C: 0x017f0001 FREG2: Management Engine region (0x00001000-0x0017ffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0180 FLREG2 0x017f0001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00180000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x0017ffff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x10, id2 0x33, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:E, 0x003000-0x003fff:S, 0x004000-0x004fff:EW, 0x005000-0x005fff:E, 0x006000-0x006fff:E, 0x007000-0x007fff:E, 0x008000-0x008fff:EW, 0x009000-0x009fff:S, 0x00a000-0x00afff:EW, 0x00b000-0x00bfff:E, 0x00c000-0x00cfff:EW, 0x00d000-0x00dfff:E, 0x00e000-0x00efff:E, 0x00f000-0x00ffff:E, 0x010000-0x010fff:EW, 0x011000-0x011fff:E, 0x012000-0x012fff:E, 0x013000-0x013fff:E, 0x014000-0x014fff:EW, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:EW, 0x019000-0x019fff:E, 0x01a000-0x01afff:E, 0x01b000-0x01bfff:E, 0x01c000-0x01cfff:EW, 0x01d000-0x01dfff:E, 0x01e000-0x01efff:E, 0x01f000-0x01ffff:E, 0x020000-0x020fff:EW, 0x021000-0x021fff:E, 0x022000-0x022fff:E, 0x023000-0x023fff:E, 0x024000-0x024fff:EW, 0x025000-0x025fff:E, 0x026000-0x026fff:E, 0x027000-0x027fff:E, 0x028000-0x028fff:EW, 0x029000-0x029fff:E, 0x02a000-0x02afff:E, 0x02b000-0x02bfff:E, 0x02c000-0x02cfff:EW, 0x02d000-0x02dfff:E, 0x02e000-0x02efff:E, 0x02f000-0x02ffff:E, 0x030000-0x030fff:EW, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:EW, 0x035000-0x035fff:E, 0x036000-0x036fff:E, 0x037000-0x037fff:E, 0x038000-0x038fff:EW, 0x039000-0x039fff:E, 0x03a000-0x03afff:E, 0x03b000-0x03bfff:E, 0x03c000-0x03cfff:EW, 0x03d000-0x03dfff:E, 0x03e000-0x03efff:E, 0x03f000-0x03ffff:E, 0x040000-0x040fff:EW, 0x041000-0x041fff:E, 0x042000-0x042fff:E, 0x043000-0x043fff:E, 0x044000-0x044fff:EW, 0x045000-0x045fff:E, 0x046000-0x046fff:E, 0x047000-0x047fff:E, 0x048000-0x048fff:EW, 0x049000-0x049fff:E, 0x04a000-0x04afff:E, 0x04b000-0x04bfff:E, 0x04c000-0x04cfff:EW, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=1 Running OPCODE 0x20 failed at address 0x180000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:S, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S, 0x020000-0x027fff:S, 0x028000-0x02ffff:S, 0x030000-0x037fff:S, 0x038000-0x03ffff:S, 0x040000-0x047fff:S, 0x048000-0x04ffff:S, 0x050000-0x057fff:S, 0x058000-0x05ffff:S, 0x060000-0x067fff:S, 0x068000-0x06ffff:S, 0x070000-0x077fff:S, 0x078000-0x07ffff:S, 0x080000-0x087fff:S, 0x088000-0x08ffff:S, 0x090000-0x097fff:S, 0x098000-0x09ffff:S, 0x0a0000-0x0a7fff:S, 0x0a8000-0x0affff:S, 0x0b0000-0x0b7fff:S, 0x0b8000-0x0bffff:S, 0x0c0000-0x0c7fff:S, 0x0c8000-0x0cffff:S, 0x0d0000-0x0d7fff:S, 0x0d8000-0x0dffff:S, 0x0e0000-0x0e7fff:S, 0x0e8000-0x0effff:S, 0x0f0000-0x0f7fff:S, 0x0f8000-0x0fffff:S, 0x100000-0x107fff:S, 0x108000-0x10ffff:S, 0x110000-0x117fff:S, 0x118000-0x11ffff:S, 0x120000-0x127fff:S, 0x128000-0x12ffff:S, 0x130000-0x137fff:S, 0x138000-0x13ffff:S, 0x140000-0x147fff:S, 0x148000-0x14ffff:S, 0x150000-0x157fff:S, 0x158000-0x15ffff:S, 0x160000-0x167fff:S, 0x168000-0x16ffff:S, 0x170000-0x177fff:S, 0x178000-0x17ffff:S, 0x180000-0x187fff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_52 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_d8 failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! Restoring MMIO space at 0x108b468a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: SAMSUNG RF511/RF411/RF711 17HX.M045.20121127.SSH read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/y8/l9w2_hwx2nb0bd53ny25xx540000gn/T/DPCIhyCiwM.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 328M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1009 us, 10000 myus = 10055 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string system-product-name: "RF511/RF411/RF711" DMI string system-version: "17HX" DMI string baseboard-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string baseboard-product-name: "RF511/RF411/RF711" DMI string baseboard-version: "17HX" DMI string chassis-type: "Laptop" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: FUJITSU D3024-A1 6.00 R1.05.3024.A1 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Desktop/dsdt/FUJITSU D3024-A1 6.00 R1.05.3024.A1.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 331M loops per second, 10 myus = 9 us, 100 myus = 93 us, 1000 myus = 944 us, 10000 myus = 9752 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "FUJITSU " DMI string system-product-name: "ESPRIMO E5731 " DMI string system-version: " " DMI string baseboard-manufacturer: "FUJITSU " DMI string baseboard-product-name: "D3024-A1" DMI string baseboard-version: "S26361-D3024-A1" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10D" with PCI ID 8086:3a1a. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x03: BIOS Lock Enable: enabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0x465: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0xd8, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x90, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x9f, read w/o addr, none op[7]: 0xc7, write w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00001a1b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0300 FREG1: BIOS region (0x00300000-0x003fffff) is read-write. 0x5C: 0x02f70003 FREG2: Warning: Management Engine region (0x00003000-0x002f7fff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x02ff02f8 FREG4: Platform Data region (0x002f8000-0x002fffff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x00 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0x004200 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x04040001 FLMAP1 0x0a100206 FLMAP2 0x00000120 --- Details --- NR (Number of Regions): 5 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x010 ISL (ICH/PCH Strap Length): 10 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x00300003 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 20 MHz Write and Erase Clock Freq.: 20 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0300 FLREG2 0x02f70003 FLREG3 0x00020001 FLREG4 0x02ff02f8 --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00300000 - 0x003fffff Region 2 (ME ) 0x00003000 - 0x002f7fff Region 3 (GbE ) 0x00001000 - 0x00002fff Region 4 (Platf.) 0x002f8000 - 0x002fffff === Master Section === FLMSTR1 0x1a1b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080218 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw rw ME r rw rw GbE rw SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512, 64 kB: program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190 on-the-fly OPCODE (0x15) re-programmed, op-pos=2 probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512(A), 64 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res3: id1 0x1515, id2 0x15 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1515, id2 0x15 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) at physical address 0xffc00000. Chip status register is 0x00. Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 SFDP revision = 1.1 SFDP number of parameter headers is 1 (NPH = 0). SFDP parameter table header 0/0: ID 0xef, version 1.0 Length 16 B, Parameter Table Pointer 0x000080 ID of the mandatory JEDEC SFDP parameter table is not 0 as demanded by JESD216 (warning only). Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 4096 kB. Block eraser 0: 1024 x 4096 B with opcode 0x20 It seems like this chip supports the preliminary Intel version of SFDP, skipping processing of double words 3-9. done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x09, id2 0x6f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x09, id2 0x6f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x09, id2 0x6f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x04, id2 0x06, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x09, id2 0x6f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x09, id2 0x6f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xa6, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32.V" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x003000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x1034238a0 Restoring MMIO space at 0x10342389c Restoring MMIO space at 0x103423898 Restoring MMIO space at 0x103423896 Restoring MMIO space at 0x103423894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: Packard EasyNote TK85 V1.30 read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_Lion/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/96/jvhsf_cs4210g2fq3n3yz0nm0000gn/T/DPCIeiIeMu.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 323M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1020 us, 10000 myus = 10047 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Packard Bell" DMI string system-product-name: "EasyNote TK85" DMI string system-version: "V1.30" DMI string baseboard-manufacturer: "Packard Bell" DMI string baseboard-product-name: "EasyNote TK85" DMI string baseboard-version: "V1.30" DMI string chassis-type: "Notebook" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: SAMSUNG NP300E5C-S0PRU P08RAP read
by dpcimanager＠users.sourceforge.net 13 Sep '13

13 Sep '13

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Downloads/DPCIManager_ML/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/f3/qg7wn0y91d7fg82qx3z_h5ww0000gn/T/DPCI32Ar9a.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 314M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1033 us, 10000 myus = 10210 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string system-product-name: "300E4C/300E5C/300E7C" DMI string system-version: "0.1" DMI string baseboard-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string baseboard-product-name: "NP300E5C-S0PRU" DMI string baseboard-version: "FAB1" DMI string chassis-type: "Laptop" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Re: [flashrom] Genius G540 programmer - anyone looked into supporting it?
by Stefan Tauner 12 Sep '13

12 Sep '13

On Thu, 12 Sep 2013 16:39:09 -0400 Corey Osgood <corey.osgood(a)gmail.com> wrote: > I've bought a Genius G540 programmer, it's a very cheap (~$60 USD on ebay) > USB programmer that supports a ton of eproms and flash chips, with > reasonable flashing speed, but only with Windows software. I have tried > contacting the (chinese) manufacturer for documentation, but got no > response. There does exist a sourceforge project, g540tool ( > http://sourceforge.net/projects/g540tool/), that supports 4 flash chips, > and of those 2 are parallel EPROMs, 1 is LPC flash and 1 is SPI. The > downside is that with a current ubuntu install, with libusb installed, it > doesn't compile, and the code is very poorly documented. I'm wondering if > anyone has looked into supporting this programmer under flashrom, or else > if someone with more USB and flashrom experience could take a look at the > g540tool code and give me some pointers on where to start. g540tool also > has an odd license that I'm not sure how would mesh with GPL. The license is freebsd/2-clause bsd and is compatible with the gpl. Apparently a lot more reverse engineering is needed before one could try adding support to flashrom... the dediprog module of flashrom was also created by reverse engineering the traces of USB traffic sent by the windows software, so this is definitely possible with enough time in general, but looking at the existing g540tool code, this programmer requires a lot more communication than dediprog... I think it would be best if we would ask Ivo directly what he has to say about this... hence I have added him to CC. Hi Ivo ;) If you do not know what this is about at all, please take a look at http://flashrom.org -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH 4/4] layout: Better file parsing.
by Stefan Tauner 12 Sep '13

12 Sep '13

A complete rewrite of the layout file parser: - safe (unlike before) - support for comments - supports including/sourcing of other layout files (relative to the including file as well as via absolute paths) - checks for duplicate region names (breaks inclusion loops too) - can handle region names and layout file names with spaces correctly - way better diagnostics - no more character arrays in struct romentry_t but pointers only Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.8.tmpl | 50 +++++--- layout.c | 348 +++++++++++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 331 insertions(+), 67 deletions(-) diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index b1371e4..8793e91 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -106,23 +106,46 @@ size for the flash bus. Read layout entries from .BR <file> . .sp -A layout entry describes an address region of the flash chip and gives it a name. This allows to access certain -parts of the flash chip only. A layout file can contain multiple entries one per line with the following syntax: +A layout file is useful for interacting with parts of a flash chip only. It can contain comments which are +started by a pound sign (#) and causes all following characters on the same line to be ignored with one +exception: Every layout file +.B must +start with a comment in the following form to define the version of the file. Example for the current version 2: +.sp +.B " # flashrom layout 2" +.sp +Every other line may contain either a command to include another layout file, a layout entry or white space +(and an optional comment). +.sp +To include another file you can use the +.sp +.B " source <path>" +.sp +syntax where +.B path +specifies the absolute or relative path to the file to be included. Relative paths are interpreted to be +relative to the file containing the include command. If the path contains spaces it has to be written in double +quotes, or else only the part before the first space will be used. +.sp +Each layout entry describes an address region of the flash chip and gives it a name. One entry per line is +allowed with the following syntax: .sp .B " startaddr:endaddr regionname" .sp .BR "startaddr " "and " "endaddr " -are hexadecimal addresses within the ROM file representing the flash ROM contents. -Please note that using a 0x prefix for those hexadecimal -numbers is not necessary, but you can't specify decimal/octal numbers. -.BR "regionname " "is an arbitrary name for the region from " -.BR "startaddr " "to " "endaddr " "(both addresses included)." +are addresses within the ROM file representing the flash ROM contents. They are interpreted in the 'usual' form +i.e.\ a leading 0 means octal, leading 0x or 0X means hexadecimal, everything else is just decimal. +.BR "regionname " "is the name for the region from " "startaddr " "to " "endaddr " "(both addresses included)." +If the name contains spaces it has to be written in double quotes, or else only the part before the first space +will be used. .sp Example content of file rom.layout: .sp - 00000000:00008fff gfxrom - 00009000:0003ffff normal - 00040000:0007ffff fallback + # flashrom layout 2 + source /home/flashrom/include.layout + 0x00000000:0x00008fff "gfx rom" + 0x00009000:0x0003ffff normal + 0x00040000:0x0007ffff fallback .sp .TP .B "\-i, \-\-image <name>[:<file>]" @@ -136,10 +159,11 @@ parameter specifies the name of an image file that is used to map the contents o This is useful for example if you want to write only a part of the flash chip and leave everything else alone without preparing an image of the complete chip manually: .sp -If you only want to update the image named -.BR "normal " "and " "fallback " "in a ROM based on the layout mentioned above, run" +If you only want to update the regions named +.BR "normal " "and " "gfx rom " "in a ROM based on the layout mentioned above, run" .sp -.B " flashrom \-p prog \-l rom.layout \-i normal -i fallback \-w some.rom" + +.B " flashrom \-p prog \-l rom.layout \-i normal -i ""gfx rom"" \-w some.rom" .sp .RB "Overlapping sections are resolved in an implementation-dependent manner - do " "not " "rely on it." .TP diff --git a/layout.c b/layout.c index 20fe303..5b4bee4 100644 --- a/layout.c +++ b/layout.c @@ -22,9 +22,11 @@ #include <stdio.h> #include <stdlib.h> #include <string.h> +#include <ctype.h> #include <limits.h> #include <errno.h> #ifndef __LIBPAYLOAD__ +#include <libgen.h> #include <fcntl.h> #include <sys/stat.h> #endif @@ -32,12 +34,15 @@ #include "programmer.h" #define MAX_ROMLAYOUT 32 +#define MAX_ENTRY_LEN 1024 +#define WHITESPACE_CHARS " \t" +#define INCLUDE_INSTR "source" typedef struct { unsigned int start; unsigned int end; unsigned int included; - char name[256]; + char *name; char *file; } romentry_t; @@ -50,59 +55,307 @@ static int num_rom_entries = 0; /* the number of valid rom_entries */ static char *include_args[MAX_ROMLAYOUT]; static int num_include_args = 0; /* the number of valid include_args. */ -#ifndef __LIBPAYLOAD__ -int read_romlayout(char *name) +/* returns the index of the entry (or a negative value if it is not found) */ +static int find_romentry(char *name) { - FILE *romlayout; - char tempstr[256]; int i; + msg_gspew("Looking for region \"%s\"... ", name); + for (i = 0; i < num_rom_entries; i++) { + if (strcmp(rom_entries[i].name, name) == 0) { + msg_gspew("found.\n"); + return i; + } + } + msg_gspew("not found.\n"); + return -1; +} - romlayout = fopen(name, "r"); +/* FIXME: While libpayload has no file I/O itself, code using libflashrom could still provide layout information + * obtained by other means like user input or by fetching it from somewhere else. Therefore the parsing code + * should be separated from the file reading code eventually. */ +#ifndef __LIBPAYLOAD__ +/** Parse a \em possibly quoted string. + * + * The function expects \a startp to point to the string to be parsed without leading white space. If the + * string starts with a quotation mark it looks for the second one and removes both in-place, if not then it + * looks for the first white space character and uses that as delimiter of the wanted string. + * After returning \a startp will point to a string that is either the original string with the quotation marks + * removed, or the first word of that string before a white space. + * If \a endp is not NULL it will be set to point to the first character after the parsed string, which might + * well be the '\0' at the end of the string pointed to by \a startp if there are no more characters. + * + * @param start Points to the input string. + * @param end Is set to the first char following the input string. + * @return 0 on success, 1 if the parsed string is empty or a quotation mark is not matched. + */ +static int unquote_string(char **startp, char **endp) +{ + char *end; + size_t len; + if (**startp == '"') { + (*startp)++; + len = strcspn(*startp, "\""); + } else { + len = strcspn(*startp, WHITESPACE_CHARS); + } + if (len == 0) + return 1; - if (!romlayout) { - msg_gerr("ERROR: Could not open ROM layout (%s).\n", - name); - return -1; + end = *startp + len; + if (*end != '\0') { + *end = '\0'; + end++; } + if (endp != NULL) + *endp = end; + msg_gspew("%s: start=\"%s\", end=\"%s\"\n", __func__, *startp, end); + return 0; +} - while (!feof(romlayout)) { - char *tstr1, *tstr2; +/** Parse one line in a layout file. + * @param file_name The name of the file this line originates from. + * @param file_version The version of the layout specification to be used. + * @param entry If not NULL fill it with the parsed data, else just detect errors and print diagnostics. + * @return 1 on error, + * 0 if the line could be parsed into a layout entry succesfully, + * -1 if a file was successfully sourced. + */ +static int parse_entry(char *file_name, int file_version, char *buf, romentry_t *entry) +{ + int addr_base; + if (file_version == 1) + addr_base = 16; + else if (file_version >= 2) + addr_base = 0; /* autodetect */ + else + return 1; - if (num_rom_entries >= MAX_ROMLAYOUT) { - msg_gerr("Maximum number of ROM images (%i) in layout " - "file reached.\n", MAX_ROMLAYOUT); - return 1; - } - if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[num_rom_entries].name)) - continue; -#if 0 - // fscanf does not like arbitrary comments like that :( later - if (tempstr[0] == '#') { - continue; + msg_gdbg2("String to parse: \"%s\".\n", buf); + + /* Skip all white space in the beginning. */ + char *tmp_str = buf + strspn(buf, WHITESPACE_CHARS); + char *endptr; + + /* Check for include command. */ + if (file_version >= 2 && strncmp(tmp_str, INCLUDE_INSTR, strlen(INCLUDE_INSTR)) == 0) { + tmp_str += strlen(INCLUDE_INSTR); + tmp_str += strspn(tmp_str, WHITESPACE_CHARS); + if (unquote_string(&tmp_str, NULL) != 0) { + msg_gerr("Error parsing version %d layout entry: Could not find file name in \"%s\".\n", + file_version, buf); + return 1; } -#endif - tstr1 = strtok(tempstr, ":"); - tstr2 = strtok(NULL, ":"); - if (!tstr1 || !tstr2) { - msg_gerr("Error parsing layout file. Offending string: \"%s\"\n", tempstr); - fclose(romlayout); + msg_gspew("Source command found with filename \"%s\".\n", tmp_str); + + int ret; + /* If a relative path is given, append it to the dirname of the current file. */ + if (*tmp_str != '/') { + /* We need space for: dirname of file_name, '/' , the file name in tmp_strand and '\0'. + * Since the dirname of file_name is shorter than file_name this is more than enough: */ + char *path = malloc(strlen(file_name) + strlen(tmp_str) + 2); + if (path == NULL) { + msg_gerr("Out of memory!\n"); + return 1; + } + strcpy(path, file_name); + + /* A less insane but incomplete dirname implementation... */ + endptr = strrchr(path, '/'); + if (endptr != NULL) { + endptr[0] = '/'; + endptr[1] = '\0'; + } else { + /* This is safe because the original file name was at least one char. */ + path[0] = '.'; + path[1] = '/'; + path[2] = '\0'; + } + strcat(path, tmp_str); + ret = read_romlayout(path); + free(path); + } else + ret = read_romlayout(tmp_str); + return ret == 0 ? -1 : 1; + } + + errno = 0; + long tmp_long = strtol(tmp_str, &endptr, addr_base); + if (errno != 0 || endptr == tmp_str || tmp_long < 0 || tmp_long > UINT32_MAX) { + msg_gerr("Error parsing version %d layout entry: Could not convert start address in \"%s\".\n", + file_version, buf); + return 1; + } + uint32_t start = tmp_long; + + tmp_str = endptr + strspn(endptr, WHITESPACE_CHARS); + if (*tmp_str != ':') { + msg_gerr("Error parsing version %d layout entry: Address separator does not follow start address in \"%s\"" + ".\n", file_version, buf); + return 1; + } + tmp_str++; + + errno = 0; + tmp_long = strtol(tmp_str, &endptr, addr_base); + if (errno != 0 || endptr == tmp_str || tmp_long < 0 || tmp_long > UINT32_MAX) { + msg_gerr("Error parsing version %d layout entry: Could not convert end address in \"%s\"\n", + file_version, buf); + return 1; + } + uint32_t end = tmp_long; + + size_t skip = strspn(endptr, WHITESPACE_CHARS); + if (skip == 0) { + msg_gerr("Error parsing version %d layout entry: End address is not followed by white space in " + "\"%s\"\n", file_version, buf); + return 1; + } + + tmp_str = endptr + skip; + /* The region name is either enclosed by quotes or ends with the first whitespace. */ + if (unquote_string(&tmp_str, &endptr) != 0) { + msg_gerr("Error parsing version %d layout entry: Could not find region name in \"%s\".\n", + file_version, buf); + return 1; + } + + msg_gdbg("Parsed entry: 0x%08x - 0x%08x named \"%s\"\n", start, end, tmp_str); + + if (start >= end) { + msg_gerr("Error parsing version %d layout entry: Length of region \"%s\" is not positive.\n", + file_version, tmp_str); + return 1; + } + + if (find_romentry(tmp_str) >= 0) { + msg_gerr("Error parsing version %d layout entry: Region name \"%s\" used multiple times.\n", + file_version, tmp_str); + return 1; + } + + endptr += strspn(endptr, WHITESPACE_CHARS); + if (strlen(endptr) != 0) + msg_gerr("Warning: Region name \"%s\" is not followed by white space only.\n", tmp_str); + + if (entry != NULL) { + entry->name = strdup(tmp_str); + if (entry->name == NULL) { + msg_gerr("Out of memory!\n"); return 1; } - rom_entries[num_rom_entries].start = strtol(tstr1, (char **)NULL, 16); - rom_entries[num_rom_entries].end = strtol(tstr2, (char **)NULL, 16); - rom_entries[num_rom_entries].included = 0; - rom_entries[num_rom_entries].file = NULL; - num_rom_entries++; + + entry->start = start; + entry->end = end; + entry->included = 0; + entry->file = NULL; } + return 0; +} - for (i = 0; i < num_rom_entries; i++) { - msg_gdbg("romlayout %08x - %08x named %s\n", - rom_entries[i].start, - rom_entries[i].end, rom_entries[i].name); +/* Scan the first line for the determinant version comment and parse it, or assume it is version 1. */ +static int detect_layout_version(FILE *romlayout) +{ + int c; + do { /* Skip white space */ + c = fgetc(romlayout); + if (c == EOF) + return -1; + } while (isblank(c)); + ungetc(c, romlayout); + + const char* vcomment = "# flashrom layout "; + char buf[strlen(vcomment) + 1]; /* comment + \0 */ + if (fgets(buf, sizeof(buf), romlayout) == NULL) + return -1; + if (strcmp(vcomment, buf) != 0) + return 1; + int version; + if (fscanf(romlayout, "%d", &version) != 1) + return -1; + if (version < 2) { + msg_gwarn("Warning: Layout file declares itself to be version %d, but self delcaration has\n" + "only been possible since version 2. Continuing anyway.\n", version); } + return version; +} - fclose(romlayout); +int read_romlayout(char *name) +{ + FILE *romlayout = fopen(name, "r"); + if (romlayout == NULL) { + msg_gerr("ERROR: Could not open layout file \"%s\".\n", name); + return -1; + } + + int file_version = detect_layout_version(romlayout); + if (file_version < 0) { + msg_gerr("Could not determine version of layout file \"%s\".\n", name); + fclose(romlayout); + return 1; + } + if (file_version < 1 || file_version > 2) { + msg_gerr("Unknown layout file version: %d\n", file_version); + fclose(romlayout); + return 1; + } + rewind(romlayout); + + msg_gdbg("Parsing layout file \"%s\" according to version %d.\n", name, file_version); + int linecnt = 0; + while (!feof(romlayout)) { + char buf[MAX_ENTRY_LEN]; + char *curchar = buf; + linecnt++; + msg_gspew("Parsing line %d of \"%s\".\n", linecnt, name); + + while (true) { + char c = fgetc(romlayout); + if (c == '#') { + if (file_version == 1) { + msg_gerr("Line %d of version %d layout file \"%s\" contains a " + "forbidden #.\n", linecnt, file_version, name); + fclose(romlayout); + return 1; + } + do { /* Skip characters in comments */ + c = fgetc(romlayout); + } while (c != EOF && c != '\n'); + continue; + } + if (c == EOF || c == '\n') { + *curchar = '\0'; + break; + } + if (curchar == &buf[MAX_ENTRY_LEN - 1]) { + msg_gerr("Line %d of layout file \"%s\" is longer than the allowed %d chars.\n", + linecnt, name, MAX_ENTRY_LEN); + fclose(romlayout); + return 1; + } + *curchar = c; + curchar++; + } + + /* Skip all whitespace or empty lines */ + if (strspn(buf, WHITESPACE_CHARS) == strlen(buf)) + continue; + romentry_t *entry = (num_rom_entries >= MAX_ROMLAYOUT) ? NULL : &rom_entries[num_rom_entries]; + int ret = parse_entry(name, file_version, buf, entry); + if (ret > 0) { + fclose(romlayout); + return 1; + } + /* Only 0 indicates the successfully parsing of a layout entry, -1 indicates a sourced file. */ + if (ret == 0) + num_rom_entries++; + } + fclose(romlayout); + if (num_rom_entries >= MAX_ROMLAYOUT) { + msg_gerr("Found %d entries in layout file which is more than the %i allowed.\n", + num_rom_entries + 1, MAX_ROMLAYOUT); + return 1; + } return 0; } #endif @@ -141,21 +394,6 @@ int register_include_arg(char *name) return 0; } -/* returns the index of the entry (or a negative value if it is not found) */ -static int find_romentry(char *name) -{ - int i; - msg_gspew("Looking for region \"%s\"... ", name); - for (i = 0; i < num_rom_entries; i++) { - if (strcmp(rom_entries[i].name, name) == 0) { - msg_gspew("found.\n"); - return i; - } - } - msg_gspew("not found.\n"); - return -1; -} - /* process -i arguments * returns 0 to indicate success, >0 to indicate failure */ @@ -219,6 +457,8 @@ void layout_cleanup(void) num_include_args = 0; for (i = 0; i < num_rom_entries; i++) { + free(rom_entries[i].name); + rom_entries[i].name = NULL; free(rom_entries[i].file); rom_entries[i].file = NULL; rom_entries[i].included = 0; -- Kind regards, Stefan Tauner

1 0

[PATCH 3/4] util: add script for converting legacy layout files to format 2.
by Stefan Tauner 12 Sep '13

12 Sep '13

Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- util/convert_layout_v1_to_v2.sh | 71 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100755 util/convert_layout_v1_to_v2.sh diff --git a/util/convert_layout_v1_to_v2.sh b/util/convert_layout_v1_to_v2.sh new file mode 100755 index 0000000..ec98eb8 --- /dev/null +++ b/util/convert_layout_v1_to_v2.sh @@ -0,0 +1,71 @@ +#!/bin/sh +# +# Copyright 2013 Stefan Tauner +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301, USA. +# +# +# +# This script converts legacy layout files as understood by flashrom up to version 0.9.7 to format version 2.0. +# It converts all files given as parameters in place and creates backups (with the suffix ".old") of the old +# contents unless --nobackup is given. +# +# It does... +# - check if the file format is already in 2 format +# - prefix addresses with 0x if they have not been already +# - remove superfluous white space (i.e. more than one consecutive space) +# - remove white space from otherwise empty lines + +usage () +{ + echo "Usage: $0 [--nobackup] FILE..." + exit 1 +} + +if [ $# -eq 0 ]; then + usage +fi + +if [ $1 = "--nobackup" ]; then + sed_opt="-i" + shift + if [ $# -eq 0 ]; then + usage + fi +else + sed_opt="-i.old" +fi + +for f in "$@" ; do + if [ ! -e "$f" ]; then + echo "File not found: $f">&2 + continue + fi + + if grep -q 'flashrom layout 2\b' "$f" ; then + echo "File already in new format: $f" + continue + fi + + sed $sed_opt -e " + 1i # flashrom layout 2 + s/ *$0x\|$$[0-9a-fA-F][0-9a-fA-F]*$ *: *$0x\|$$[0-9a-fA-F][0-9a-fA-F]*$ */0x\2:0x\4 / + s/ */ / + s/^ *$// + " "$f" + echo "$f done" +done +echo "Done!" -- Kind regards, Stefan Tauner

1 0

[PATCH 2/4] layout: Add -i <image>[:<file>] support.
by Stefan Tauner 12 Sep '13

12 Sep '13

Add an optional sub-parameter to the -i parameter to allow building the image to be written from multiple files. This will also allow regions to be read from flash and written to separate image files in a later patch. Document the whole layout handling including the new features a bit better. based on chromiumos' d0ea9ed71e7f86bb8e8db2ca7c32a96de25343d8 Signed-off-by: David Hendricks <dhendrix(a)chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.8.tmpl | 47 +++++++++++++-------------- flashrom.c | 8 +++-- layout.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++------- 3 files changed, 116 insertions(+), 37 deletions(-) diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 5ede423..b1371e4 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -6,7 +6,7 @@ flashrom \- detect, read, write, verify and erase flash chips \fB\-p\fR <programmername>[:<parameters>] [\fB\-E\fR|\fB\-r\fR <file>|\fB\-w\fR <file>|\fB\-v\fR <file>] \ [\fB\-c\fR <chipname>] - [\fB\-l\fR <file> [\fB\-i\fR <image>]] [\fB\-n\fR] [\fB\-f\fR]] + [\fB\-l\fR <file> [\fB\-i\fR <image>[:<file>]]...] [\fB\-n\fR] [\fB\-f\fR]] [\fB\-V\fR[\fBV\fR[\fBV\fR]]] [\fB-o\fR <logfile>] .SH DESCRIPTION .B flashrom @@ -103,44 +103,45 @@ size for the flash bus. * Force write even if write is known bad. .TP .B "\-l, \-\-layout <file>" -Read ROM layout from +Read layout entries from .BR <file> . .sp -flashrom supports ROM layouts. This allows you to flash certain parts of -the flash chip only. A ROM layout file contains multiple lines with the -following syntax: +A layout entry describes an address region of the flash chip and gives it a name. This allows to access certain +parts of the flash chip only. A layout file can contain multiple entries one per line with the following syntax: .sp -.B " startaddr:endaddr imagename" +.B " startaddr:endaddr regionname" .sp .BR "startaddr " "and " "endaddr " -are hexadecimal addresses within the ROM file and do not refer to any -physical address. Please note that using a 0x prefix for those hexadecimal +are hexadecimal addresses within the ROM file representing the flash ROM contents. +Please note that using a 0x prefix for those hexadecimal numbers is not necessary, but you can't specify decimal/octal numbers. -.BR "imagename " "is an arbitrary name for the region/image from" -.BR " startaddr " "to " "endaddr " "(both addresses included)." +.BR "regionname " "is an arbitrary name for the region from " +.BR "startaddr " "to " "endaddr " "(both addresses included)." .sp -Example: +Example content of file rom.layout: .sp 00000000:00008fff gfxrom 00009000:0003ffff normal 00040000:0007ffff fallback .sp -If you only want to update the image named -.BR "normal " "in a ROM based on the layout above, run" -.sp -.B " flashrom \-p prog \-\-layout rom.layout \-\-image normal \-w some.rom" +.TP +.B "\-i, \-\-image <name>[:<file>]" +Work on the flash region +.B name +instead of the full address space if a layout file is given and parsed correctly. +Multiple such image parameters can be used to include the union of different regions. +The optional +.B file +parameter specifies the name of an image file that is used to map the contents of that very region only. +This is useful for example if you want to write only a part of the flash chip and leave everything else alone +without preparing an image of the complete chip manually: .sp -To update only the images named -.BR "normal " "and " "fallback" ", run:" +If you only want to update the image named +.BR "normal " "and " "fallback " "in a ROM based on the layout mentioned above, run" .sp .B " flashrom \-p prog \-l rom.layout \-i normal -i fallback \-w some.rom" .sp -Overlapping sections are not supported. -.TP -.B "\-i, \-\-image <imagename>" -Only flash region/image -.B <imagename> -from flash layout. +.RB "Overlapping sections are resolved in an implementation-dependent manner - do " "not " "rely on it." .TP .B "\-L, \-\-list\-supported" List the flash chips, chipsets, mainboards, and external programmers diff --git a/flashrom.c b/flashrom.c index a00347e..cd15de7 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1993,9 +1993,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, } msg_cinfo("done.\n"); - // This should be moved into each flash part's code to do it - // cleanly. This does the job. - handle_romentries(flash, oldcontents, newcontents); + if (handle_romentries(flash, oldcontents, newcontents)) { + msg_gerr("Could not prepare the data to be written due to problems with the layout,\n" + "aborting.\n"); + goto out; + } // //////////////////////////////////////////////////////////// diff --git a/layout.c b/layout.c index 86351b8..20fe303 100644 --- a/layout.c +++ b/layout.c @@ -23,6 +23,11 @@ #include <stdlib.h> #include <string.h> #include <limits.h> +#include <errno.h> +#ifndef __LIBPAYLOAD__ +#include <fcntl.h> +#include <sys/stat.h> +#endif #include "flash.h" #include "programmer.h" @@ -33,6 +38,7 @@ typedef struct { unsigned int end; unsigned int included; char name[256]; + char *file; } romentry_t; /* rom_entries store the entries specified in a layout file and associated run-time data */ @@ -85,6 +91,7 @@ int read_romlayout(char *name) rom_entries[num_rom_entries].start = strtol(tstr1, (char **)NULL, 16); rom_entries[num_rom_entries].end = strtol(tstr2, (char **)NULL, 16); rom_entries[num_rom_entries].included = 0; + rom_entries[num_rom_entries].file = NULL; num_rom_entries++; } @@ -138,14 +145,9 @@ int register_include_arg(char *name) static int find_romentry(char *name) { int i; - - if (num_rom_entries == 0) - return -1; - msg_gspew("Looking for region \"%s\"... ", name); for (i = 0; i < num_rom_entries; i++) { - if (!strcmp(rom_entries[i].name, name)) { - rom_entries[i].included = 1; + if (strcmp(rom_entries[i].name, name) == 0) { msg_gspew("found.\n"); return i; } @@ -167,19 +169,36 @@ int process_include_args(void) /* User has specified an area, but no layout file is loaded. */ if (num_rom_entries == 0) { - msg_gerr("Region requested (with -i \"%s\"), " - "but no layout data is available.\n", + msg_gerr("Region requested (with -i/--image \"%s\"),\n" + "but no layout data is available. To include one use the -l/--layout syntax).\n", include_args[0]); return 1; } for (i = 0; i < num_include_args; i++) { - if (find_romentry(include_args[i]) < 0) { - msg_gerr("Invalid region specified: \"%s\".\n", - include_args[i]); + char *name = strtok(include_args[i], ":"); /* -i <image>[:<file>] */ + int idx = find_romentry(name); + if (idx < 0) { + msg_gerr("Invalid region specified: \"%s\".\n", include_args[i]); return 1; } + rom_entries[idx].included = 1; found++; + + char *file = strtok(NULL, ""); /* remaining non-zero length token or NULL */ + if (file != NULL) { +#ifdef __LIBPAYLOAD__ + msg_gerr("Error: No file I/O support in libpayload\n"); + return 1; +#else + file = strdup(file); + if (file == NULL) { + msg_gerr("Out of memory!\n"); + return 1; + } + rom_entries[idx].file = file; +#endif + } } msg_ginfo("Using region%s: \"%s\"", num_include_args > 1 ? "s" : "", @@ -200,6 +219,8 @@ void layout_cleanup(void) num_include_args = 0; for (i = 0; i < num_rom_entries; i++) { + free(rom_entries[i].file); + rom_entries[i].file = NULL; rom_entries[i].included = 0; } num_rom_entries = 0; @@ -232,6 +253,57 @@ romentry_t *get_next_included_romentry(unsigned int start) return best_entry; } +/* If a file name is specified for this region, read the file contents and + * overwrite @newcontents in the range specified by @entry. */ +static int read_content_from_file(romentry_t *entry, uint8_t *newcontents) +{ + char *file = entry->file; + if (file == NULL) + return 0; + +#ifdef __LIBPAYLOAD__ + msg_gerr("Error: No file I/O support in libpayload\n"); + return 1; +#else + int len = entry->end - entry->start + 1; + FILE *fp; + if ((fp = fopen(file, "rb")) == NULL) { + msg_gerr("Error: Opening layout image file \"%s\" failed: %s\n", file, strerror(errno)); + return 1; + } + + struct stat file_stat; + if (fstat(fileno(fp), &file_stat) != 0) { + msg_gerr("Error: Getting metadata of layout image file \"%s\" failed: %s\n", file, strerror(errno)); + fclose(fp); + return 1; + } + if (file_stat.st_size != len) { + msg_gerr("Error: Image size (%jd B) doesn't match the flash chip's size (%d B)!\n", + (intmax_t)file_stat.st_size, len); + fclose(fp); + return 1; + } + + int numbytes = fread(newcontents + entry->start, 1, len, fp); + if (ferror(fp)) { + msg_gerr("Error: Reading layout image file \"%s\" failed: %s\n", file, strerror(errno)); + fclose(fp); + return 1; + } + if (fclose(fp)) { + msg_gerr("Error: Closing layout image file \"%s\" failed: %s\n", file, strerror(errno)); + return 1; + } + if (numbytes != len) { + msg_gerr("Error: Failed to read layout image file \"%s\" completely.\n" + "Got %d bytes, wanted %d!\n", file, numbytes, len); + return 1; + } + return 0; +#endif +} + int handle_romentries(const struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; @@ -259,6 +331,10 @@ int handle_romentries(const struct flashctx *flash, uint8_t *oldcontents, uint8_ if (entry->start > start) memcpy(newcontents + start, oldcontents + start, entry->start - start); + /* For included region, copy from file if specified. */ + if (read_content_from_file(entry, newcontents) != 0) + return 1; + /* Skip to location after current romentry. */ start = entry->end + 1; /* Catch overflow. */ -- Kind regards, Stefan Tauner

1 0

[PATCH 1/4] layout: Add a method to cleanup layout data structures.
by Stefan Tauner 12 Sep '13

12 Sep '13

Add layout_cleanup() to layout.c and hook it up in cli_classic.c. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- cli_classic.c | 3 +-- flash.h | 1 + layout.c | 16 ++++++++++++++++ 3 files changed, 18 insertions(+), 2 deletions(-) diff --git a/cli_classic.c b/cli_classic.c index 4c71d07..70bccb5 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -221,8 +221,6 @@ int main(int argc, char *argv[]) free(tempstr); cli_classic_abort_usage(); } - /* FIXME: A pointer to the image name is saved in a static array (of size MAX_ROMLAYOUT) - * by register_include_arg() and needs to be freed after processing them. */ break; case 'L': if (++operation_specified > 1) { @@ -527,6 +525,7 @@ out: for (i = 0; i < chipcount; i++) free(flashes[i].chip); + layout_cleanup(); free(filename); free(layoutfile); free(pparam); diff --git a/flash.h b/flash.h index 63701ed..7b88477 100644 --- a/flash.h +++ b/flash.h @@ -320,6 +320,7 @@ int register_include_arg(char *name); int process_include_args(void); int read_romlayout(char *name); int handle_romentries(const struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents); +void layout_cleanup(void); /* spi.c */ struct spi_command { diff --git a/layout.c b/layout.c index 8bb1666..86351b8 100644 --- a/layout.c +++ b/layout.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005-2008 coresystems GmbH * (Written by Stefan Reinauer <stepan(a)coresystems.de> for coresystems GmbH) + * Copyright (C) 2011-2013 Stefan Tauner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -189,6 +190,21 @@ int process_include_args(void) return 0; } +void layout_cleanup(void) +{ + int i; + for (i = 0; i < num_include_args; i++) { + free(include_args[i]); + include_args[i] = NULL; + } + num_include_args = 0; + + for (i = 0; i < num_rom_entries; i++) { + rom_entries[i].included = 0; + } + num_rom_entries = 0; +} + romentry_t *get_next_included_romentry(unsigned int start) { int i; -- Kind regards, Stefan Tauner

1 0

[PATCH 0/4] layout patches 3.0 (first half)
by Stefan Tauner 12 Sep '13

12 Sep '13

This set is only the infrastructural base on which the patches that make layout handling work in other modes than writing rely on. Stefan Tauner (4): layout: Add a method to cleanup layout data structures. layout: Add -i <image>[:<file>] support. util: add script for converting legacy layout files to format 2. layout: Better file parsing. cli_classic.c | 3 +- flash.h | 1 + flashrom.8.tmpl | 79 ++++--- flashrom.c | 8 +- layout.c | 456 ++++++++++++++++++++++++++++++++++------ util/convert_layout_v1_to_v2.sh | 71 +++++++ 6 files changed, 524 insertions(+), 94 deletions(-) create mode 100755 util/convert_layout_v1_to_v2.sh -- Kind regards, Stefan Tauner

1 0

Genius G540 programmer - anyone looked into supporting it?
by Corey Osgood 12 Sep '13

12 Sep '13

I've bought a Genius G540 programmer, it's a very cheap (~$60 USD on ebay) USB programmer that supports a ton of eproms and flash chips, with reasonable flashing speed, but only with Windows software. I have tried contacting the (chinese) manufacturer for documentation, but got no response. There does exist a sourceforge project, g540tool ( http://sourceforge.net/projects/g540tool/), that supports 4 flash chips, and of those 2 are parallel EPROMs, 1 is LPC flash and 1 is SPI. The downside is that with a current ubuntu install, with libusb installed, it doesn't compile, and the code is very poorly documented. I'm wondering if anyone has looked into supporting this programmer under flashrom, or else if someone with more USB and flashrom experience could take a look at the g540tool code and give me some pointers on where to start. g540tool also has an odd license that I'm not sure how would mesh with GPL. Thanks, Corey

1 0

flashrom upgrade
by it＠sca-uk.com 12 Sep '13

12 Sep '13

Super I/O ID 0x8712 is not on the list of flash capable controllers. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified.

1 0

Re: [flashrom] [PATCH] BSD refinements.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Tue, 3 Sep 2013 01:25:17 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Make it easier to compile flashrom under NetBSD and DragonFlyBSD: > - Use /usr/pkg/ as prefix for includes and linking > - Use pciutils as include path for the right(tm) libpci > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> After some wrestling with the sed script to parse subversion's date output which was tested by Idwer quite a few times, I have committed a refined version of this patch in r1742. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/6] sbxxx: Add detection for the remaining AMD chipset families.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Tue, 10 Sep 2013 09:31:13 +0200 (CEST) "Carl-Daniel U. Hailfinger" <c-d.hailfinger.devel.2006(a)gmx.net> wrote: > [Sorry for breaking the threading. This is meant to be a reply to > http://patchwork.coreboot.org/patch/4016/ ] > Stefan Tauner wrote on 2013-08-14 17:35:13 > > > > On Wed, 14 Aug 2013 08:42:15 +0200 > > Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> wrote: > > > > > Am 10.08.2013 03:45 schrieb Stefan Tauner: > > > > Also, correct prettyprinting of the registers of the various families, > > > > and abort if SpiAccessMacRomEn or SpiHostAccessRomEn prohibit full access. > > > > > > > > Tested reading/writing on ASRock IMB-A180, and chipset detection on > > > > one of each affected generation by Chris Goodrich from Sage. > > > > > > > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > > > --- > > > > sb600spi.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++------------- > > > > 1 file changed, 106 insertions(+), 27 deletions(-) > > > > > > > > diff --git a/sb600spi.c b/sb600spi.c > > > > index cb7c4ac..c9be44c 100644 > > > > --- a/sb600spi.c > > > > +++ b/sb600spi.c > > > > @@ -57,7 +57,28 @@ static enum amd_chipset amd_gen = CHIPSET_AMD_UNKNOWN; > > > > static void determine_generation(struct pci_dev *dev) > > > > { > > > > amd_gen = CHIPSET_AMD_UNKNOWN; > > > > - if (dev->device_id == 0x780e) { > > > > + msg_pdbg2("Trying to determine the generation of the SPI interface... "); > > > > + if (dev->device_id == 0x438d) { > > > > + amd_gen = CHIPSET_SB6XX; > > > > + msg_pdbg("SB6xx detected.\n"); > > > > + } else if (dev->device_id == 0x439d) { > > > > + struct pci_dev *smbus_dev = pci_dev_find(0x1002, 0x4385); > > > > > > Why do we search twice for this SMBus device, once inside > > > sb600_probe_spi and once here? Can't we just pass the smbus device as > > > second parameter to determine_generation? > > > > Yes we could and I thought about this too but came to the conclusion > > that it is not worth it. Do you think otherwise? > > I'd really like to limit the number of times we search for PCI devices. > On some machines with lots of PCI devices that can take a lot of time. I have no idea how you come to that conclusion. This uses 0 bus accesses AFAICS because libpci caches that information, but even if we would have to rescan all devices on the bus it would be rather negligible: it does only apply to very few users and I am not sure if any of them would notice it. It might not be pretty theoretically, but I don't anticipate any problems in reality at all. What do you think is the worst case latency added? A few ms? > That said, I also think such refactoring can be done in a later > iteration, and it is also possible to have the generation detection as > first command inside the AMD SBx00 SPI probe function, and let it set > a static struct *smbus_dev. Your choice when/how to deal with it. > > Anyway, most/all of the code above was committed in r1706, so this is > mostly an after-the-fact review. ATM we do only look for the smbus device twice on hudson 2+ and yangtze. With the rebased version of this patch it will be done for all amd chipsets since sb7xx: > > > > + if (smbus_dev == NULL) > > > > + return; > > > > + uint8_t rev = pci_read_byte(smbus_dev, PCI_REVISION_ID); > > > > + if (rev >= 0x39 && rev <= 0x3D) { > > > > + amd_gen = CHIPSET_SB7XX; > > > > + msg_pdbg("SB7xx/SP5100 detected.\n"); > > > > + } else if (rev >= 0x40 && rev <= 0x42) { > > > > + amd_gen = CHIPSET_SB89XX; > > > > + msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); > > > > + } else { > > > > + msg_pwarn("SB device found but SMBus revision 0x%02x does not match known values.\n" > > > > + "Assuming SB8xx/SB9xx/Hudson-1. Please send a log to flashrom(a)flashrom.org\n", > > > > + rev); > > > > + amd_gen = CHIPSET_SB89XX; > > > > > > We could error out here as well. The next release is a few weeks away > > > anyway. > > > > No regressions if we can easily avoid them please (I'll break enough > > stuff unintentionally, rest assured :) > > It is fairly safe to assume that the code path for sb89xx/hudson will > > work on such devices if they exist, maybe with some wrong prints if it > > is sb7xx but nothing we worried about until I provided a solution for > > it in most cases :) > > I'm not convinced that this would likely introduce a regression. For all > we know, AMD might use higher SMBus device PCI revision IDs for respins > of older chipsets, and there we really want to error out instead of having > flashrom deal with bogus errors. This does only affect pre-hudson2 chipsets. All of them work fine with the existing code for pre-hudson2 chipsets as far as most users are concerned. With my changes applied it would print an additional warning (the one above) and maybe print some verbose messages about registers that do not exist. The latter has been the case since we had sb7xx support and I can't remember anyone complaining (or sending a fix for it). Therefore, I don't see any beneficial effects of bailing out here other than getting notified about different IDs more probably. > > > > - tmp = pci_read_byte(dev, 0xbb); > > > > - /* FIXME: Set bit 3,6,7 if not already set. > > > > - * Set bit 5, otherwise SPI accesses are pointless in LPC mode. > > > > - * See doc 42413 AMD SB700/710/750 RPR. > > > > + /* Chipset support matrix for SPI Base_Addr (LPC PCI reg 0xa0) > > > > + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze > > > > + * 3 rsvd <- <- ? <- ? RouteTpm2Spi > > > > + * 2 rsvd AbortEnable rsvd ? <- ? <- > > > > + * 1 rsvd SpiRomEnable <- ? <- ? <- > > > > + * 0 rsvd AltSpiCSEnable<1> rsvd ? <- ? <- > > > > > > Maybe it's just me, but I have trouble parsing that table. Let's talk > > > about bit 2: What you mean is clear for 6xx (rsvd), 7xx (abortenable), > > > 8xx (abortenable). I'm assuming that this bit is not described for 9xx > > > and hudson1, but why is the hudson2+ entry "?" instead of "<-" ? Or do > > > the "?" entries for 9xx and hudson2+ have a different meaning? > > > > Actually it is the <- that changes meaning, if you will, and the ? are > > not just "we dont know", as one obviously would to infer. > > The ? marks values where we do not have a datasheet, but which we > > assume to be identical to the previous generations. So maybe we should > > use "<-?" instead? Other suggestions are very welcomed. > > Now it should also be clear what the <- after a ? means: we have a > > datasheet and it indicates the same values as the generation *before* > > the question marks before it. I used this mainly for myself but I would > > still like to include it in some form. > > Let me try to phrase this in a way I can understand: > +++++++++++++ > How to read this table: > "nd" means we have no datasheet for this chipset generation. > "ni" means the datasheet for this generation doesn't have any relevant info. > "<-" means the bit/register meaning is identical to the next non-ni/non-nd > chipset to the left. > If a "nd" chipset is between two chipsets with identical meaning, we assume > the meaning didn't change twice in between, i.e. the meaning is unchanged > for the "nd" chipset. This is a tried and (so far) valid assumption. > +++++++++++++ > Your "?" would turn into "nd". > > That said, keeping your symbols is also an option. My phrasing for that > scenario would be: > +++++++++++++ > How to read this table: > "?" means we have no datasheet for this chipset generation or the datasheet > doesn't have any relevant info. > "<-" means the bit/register meaning is identical to the next non-"?" > chipset to the left. "<-" thus never refers to a "?". > If a "?" chipset is between two chipsets with identical meaning, we assume > the meaning didn't change twice in between, i.e. the meaning is unchanged > for the "?" chipset. This is a tried and (so far) valid assumption. > +++++++++++++ I have added an explanation to the source. > > > > + * > > > > + * <1> It is unknown if that was ever working. On later chipsets the CS config is at memmapped 0x1D. > > > > > > Heh. Let's find someone with DualBIOS on a SB7xx board. But seriously, > > > I'd assume this works if it's still in the current revision of the > > > register reference guide. > > > > The problem is (IIRC) that it is not too well defined (who would have > > thought that!) but maybe I am confusing it with Fast Speed. > > AFAICS the meaning is well defined, except that vendors apparently didn't > use it on the boards we know. A simple test would be to set that bit and > check if SPI probe still returns anything. If yes, there are either two > flash chips or my understanding of that bit is wrong. If it is well defined you can surely tell me which pin SPI_CS2# is connected to? Oh actually you can. It is H21 == SPI_CS2#/IMC_GPIO2. My skepticism was rooted in the phrase "When this bit is set, SPI_CS# is routed to a different pin (TBD)" of the RRG. The sb710 databook does actually specify which pin it is... > […] > > > > > */ > > > > - msg_pdbg("(0x%08" PRIx32 ") fastReadEnable=%u, SpiArbEnable=%i, SpiAccessMacRomEn=%i, " > > > > - "SpiHostAccessRomEn=%i, ArbWaitCount=%i, " > > > > - "SpiBridgeDisable=%i, DropOneClkOnRd=%i\n", > > > > - tmp, (tmp >> 18) & 0x1, > > > > - (tmp >> 19) & 0x1, (tmp >> 22) & 0x1, > > > > - (tmp >> 23) & 0x1, (tmp >> 24) & 0x7, > > > > - (tmp >> 27) & 0x1, (tmp >> 28) & 0x1); > > > > + tmp = mmio_readl(sb600_spibar + 0x00); > > > > + msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); > > > > + > > > > + msg_pdbg(", SpiAccessMacRomEn=%i, SpiHostAccessRomEn=%i, ArbWaitCount=%i", > > > > + (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7); > > > > + > > > > + if (amd_gen != CHIPSET_YANGTZE) > > > > + msg_pdbg(", SpiBridgeDisable=%i", (tmp >> 27) & 0x1); > > > > + > > > > + switch (amd_gen) { > > > > + case CHIPSET_SB7XX: > > > > + msg_pdbg(", DropOneClkOnRd/SpiClkGate=%i", (tmp >> 28) & 0x1); > > > > > > Should we check that bit and set it to 0? I haven't yet been able to > > > find a good explanation of what it does, but it seems to be a trick to > > > allow normal read commands at higher speed. I could be mistaken, though. > > > > I would refrain from changing it if we don't really know what it does > > (and we probably will never do so...). I have read the description a > > few times... and it does not make a lot of sense to me. > > Maybe our friends at AMD/Sage can explain this? One would have to ask them ;) > > > > + case CHIPSET_SB89XX: > > > > + case CHIPSET_HUDSON234: > > > > + msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1); > > > > + default: break; > > > > + } > > > > + msg_pdbg("\n"); > > > > + > > > > + if (((tmp >> 22) & 0x1) == 0 || ((tmp >> 23) & 0x1) == 0) { > > > > + msg_perr("ERROR: State of SpiAccessMacRomEn or SpiHostAccessRomEn prohibits full access.\n"); > > > > + return ERROR_NONFATAL; > > > > + } > > > > + > > > > tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; > > > > msg_pdbg("NormSpeed is %s MHz\n", speed_names[tmp]); > > > > > > AFAICS this speed handling stuff is changing in a later patch, correct? > > > > Exactly because this is a good breaking point to avoid a monster > > patch ;) > > > > Thanks for the review! Apart from the ? explanation and the fatal > > error, I think this can go in soon? > > Yes, looks fine otherwise. Could you please forward-port this patch > and repost it? I just want to make sure I didn't overlook anything > serious. > Otherwise, this is (with the ? explanation and the fatal error) > > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> repost follows later. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 3

Re: [flashrom] [PATCH 1/2] sbxxx: Add detection for the remaining AMD chipset families.
by Carl-Daniel Hailfinger 12 Sep '13

12 Sep '13

Am 12.09.2013 17:18 schrieb Stefan Tauner: > Also, correct prettyprinting of the registers of the various families, > and abort if SpiAccessMacRomEn or SpiHostAccessRomEn prohibit full access. > > Tested reading/writing on ASRock IMB-A180, and chipset detection on > one of each affected generation by Chris Goodrich from Sage. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Thanks! Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1742 - in trunk: . util
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 17:48:39 2013 New Revision: 1742 URL: http://flashrom.org/trac/flashrom/changeset/1742 Log: BSD refinements. Make it easier to compile flashrom under NetBSD and DragonFlyBSD: - Use /usr/pkg/ as prefix for includes and linking - Use pciutils as include path for the right(tm) libpci Also, fix date handling in getrevision.sh to work with the various formats for invoking 'date'. This also uses svn's info --xml output instead of the regular one. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile trunk/README trunk/hwaccess.h trunk/util/getrevision.sh Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Sep 12 17:48:35 2013 (r1741) +++ trunk/Makefile Thu Sep 12 17:48:39 2013 (r1742) @@ -98,6 +98,16 @@ LDFLAGS += -L/usr/local/lib endif +ifeq ($(TARGET_OS), NetBSD) +CPPFLAGS += -I/usr/pkg/include +LDFLAGS += -L/usr/pkg/lib +endif + +ifeq ($(TARGET_OS), DragonFlyBSD) +CPPFLAGS += -I/usr/pkg/include +LDFLAGS += -L/usr/pkg/lib +endif + ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe CPPFLAGS += -I$(DOSLIBS_BASE)/libgetopt @@ -743,7 +753,11 @@ define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ #define index shadow_workaround_index +#if !defined __NetBSD__ && !defined __DragonFly__ #include <pci/pci.h> +#else +#include <pciutils/pci.h> +#endif struct pci_access *pacc; int main(int argc, char **argv) { Modified: trunk/README ============================================================================== --- trunk/README Thu Sep 12 17:48:35 2013 (r1741) +++ trunk/README Thu Sep 12 17:48:39 2013 (r1742) @@ -80,11 +80,9 @@ gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 -To compile on NetBSD or DragonFly BSD, use: +To compile on NetBSD or DragonFly BSD (with pciutils, libftdi, libusb installed in /usr/pkg/), use: - ln -s /usr/pkg/include/pciutils pci - gmake CPPFLAGS="-I. -I/usr/pkg/include" \ - LDFLAGS="-L/usr/pkg/lib -Wl,-rpath-link,/usr/pkg/lib" + gmake To compile on OpenBSD, use: Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Thu Sep 12 17:48:35 2013 (r1741) +++ trunk/hwaccess.h Thu Sep 12 17:48:39 2013 (r1742) @@ -37,7 +37,13 @@ * or as builtin. */ #define index shadow_workaround_index + +#if !defined (__NetBSD__) && !defined (__DragonFly__) #include <pci/pci.h> +#else +#include <pciutils/pci.h> +#endif + #undef index #endif Modified: trunk/util/getrevision.sh ============================================================================== --- trunk/util/getrevision.sh Thu Sep 12 17:48:35 2013 (r1741) +++ trunk/util/getrevision.sh Thu Sep 12 17:48:39 2013 (r1742) @@ -110,15 +110,33 @@ timestamp() { local t + # date syntaxes are manifold: + # gnu date [-d input]... [+FORMAT] + # netbsd date [-ajnu] [-d date] [-r seconds] [+format] [[[[[[CC]yy]mm]dd]HH]MM[.SS]] + # freebsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] + # dragonflybsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] + # openbsd date [-aju] [-d dst] [-r seconds] [+format] [[[[[[cc]yy]mm]dd]HH]MM[.SS]] [...] if svn_is_file_tracked "$2" ; then if svn_has_local_changes "$2"; then t=$(date -u "$1") else - # No local changes, get date of the last log record. - local last_commit_date="$(svn info "$2" | \ - grep '^Last Changed Date:' | \ - awk '{print $4" "$5" "$6}')" - t=$(date -d "${last_commit_date}" -u "$1") + # No local changes, get date of the last log record. Subversion provides that in + # ISO 8601 format when using the --xml switch. The sed call extracts that ignoring any + # fractional parts started by a comma or a dot. + local last_commit_date="$(svn info --xml "$2"| \ + sed -n -e 's/<date>$[^,\.]*$$[\.,].*$*Z<\/date>/\1Z/p')" + + case $(uname) in + # Most BSD dates do not support parsing date values from user input with -d but all of + # them support parsing the syntax with [[[[[[cc]yy]mm]dd]HH]MM[.ss]]. We have to + # transform the ISO8601 date first though. + NetBSD|OpenBSD|DragonFly|FreeBSD) + last_commit_date="$(echo ${last_commit_date} | \ + sed -n -e 's/$....$-$..$-$..$T$..$:$..$:$..$Z/\1\2\3\4\5\.\6/p')" + t=$(date -u -j "${last_commit_date}" "$1" 2>/dev/null);; + *) + t=$(date -u -d "${last_commit_date}" "$1" 2>/dev/null);; + esac fi elif git_is_file_tracked "$2" ; then # are there local changes? @@ -126,12 +144,22 @@ t=$(date -u "${1}") else # No local changes, get date of the last commit - t=$(date -d "$(git log --pretty=format:"%cD" -1 -- "$2")" -u "$1") + case $(uname) in + # Most BSD dates do not support parsing date values from user input with -d but all of + # them support parsing epoch seconds with -r. Thanks to git we can easily use that: + NetBSD|OpenBSD|DragonFly|FreeBSD) + t=$(date -u -r "$(git log --pretty=format:%ct -1 -- $2)" "$1" 2>/dev/null);; + *) + t=$(date -d "$(git log --pretty=format:%cD -1 -- $2)" -u "$1" 2>/dev/null);; + esac fi else t=$(date -u "$1") fi + if [ -z "$t" ]; then + echo "Warning: Could not determine timestamp." 2>/dev/null + fi echo "${t}" }

1 0

[commit] r1741 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 17:48:35 2013 New Revision: 1741 URL: http://flashrom.org/trac/flashrom/changeset/1741 Log: sbxxx: Add detection for the remaining AMD chipset families. Also, correct prettyprinting of the registers of the various families, and abort if SpiAccessMacRomEn or SpiHostAccessRomEn prohibit full access. Tested reading/writing on ASRock IMB-A180, and chipset detection on one of each affected generation by Chris Goodrich from Sage. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/sb600spi.c Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Thu Sep 12 16:04:31 2013 (r1740) +++ trunk/sb600spi.c Thu Sep 12 17:48:35 2013 (r1741) @@ -57,7 +57,28 @@ static void determine_generation(struct pci_dev *dev) { amd_gen = CHIPSET_AMD_UNKNOWN; - if (dev->device_id == 0x780e) { + msg_pdbg2("Trying to determine the generation of the SPI interface... "); + if (dev->device_id == 0x438d) { + amd_gen = CHIPSET_SB6XX; + msg_pdbg("SB6xx detected.\n"); + } else if (dev->device_id == 0x439d) { + struct pci_dev *smbus_dev = pci_dev_find(0x1002, 0x4385); + if (smbus_dev == NULL) + return; + uint8_t rev = pci_read_byte(smbus_dev, PCI_REVISION_ID); + if (rev >= 0x39 && rev <= 0x3D) { + amd_gen = CHIPSET_SB7XX; + msg_pdbg("SB7xx/SP5100 detected.\n"); + } else if (rev >= 0x40 && rev <= 0x42) { + amd_gen = CHIPSET_SB89XX; + msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); + } else { + msg_pwarn("SB device found but SMBus revision 0x%02x does not match known values.\n" + "Assuming SB8xx/SB9xx/Hudson-1. Please send a log to flashrom(a)flashrom.org\n", + rev); + amd_gen = CHIPSET_SB89XX; + } + } else if (dev->device_id == 0x780e) { /* The PCI ID of the LPC bridge doesn't change between Hudson-2/3/4 and Yangtze (Kabini/Temash) * although they use different SPI interfaces. */ #ifdef USE_YANGTZE_HEURISTICS @@ -94,7 +115,11 @@ "the output of lspci -nnvx, thanks!.\n", rev); } #endif - } + } else + msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 ".\n" + "Please report this to flashrom(a)flashrom.org and include this log and\n" + "the output of lspci -nnvx, thanks!\n", + __func__, dev->vendor_id, dev->device_id); } static void reset_internal_fifo_pointer(void) @@ -250,7 +275,7 @@ static int sb600_handle_imc(struct pci_dev *dev, bool amd_imc_force) { /* Handle IMC everywhere but sb600 which does not have one. */ - if (dev->device_id == 0x438d) + if (amd_gen == CHIPSET_SB6XX) return 0; /* TODO: we should not only look at IntegratedImcPresent (LPC Dev 20, Func 3, 40h) but also at @@ -336,6 +361,10 @@ sb600_spibar += tmp & 0xfff; determine_generation(dev); + if (amd_gen == CHIPSET_AMD_UNKNOWN) { + msg_perr("Could not determine chipset generation."); + return ERROR_NONFATAL; + } if (amd_gen == CHIPSET_YANGTZE) { msg_perr("SPI on Kabini/Temash and newer chipsets are not yet supported.\n" @@ -343,35 +372,89 @@ return ERROR_NONFATAL; } - tmp = pci_read_long(dev, 0xa0); - msg_pdbg("AltSpiCSEnable=%i, SpiRomEnable=%i, " - "AbortEnable=%i\n", tmp & 0x1, (tmp & 0x2) >> 1, - (tmp & 0x4) >> 2); - tmp = (pci_read_byte(dev, 0xba) & 0x4) >> 2; - msg_pdbg("PrefetchEnSPIFromIMC=%i, ", tmp); - - tmp = pci_read_byte(dev, 0xbb); - /* FIXME: Set bit 3,6,7 if not already set. - * Set bit 5, otherwise SPI accesses are pointless in LPC mode. - * See doc 42413 AMD SB700/710/750 RPR. + /* How to read the following table and similar ones in this file: + * "?" means we have no datasheet for this chipset generation or it doesn't have any relevant info. + * "<-" means the bit/register meaning is identical to the next non-"?" chipset to the left. "<-" thus + * never refers to another "?". + * If a "?" chipset is between two chipsets with identical meaning, we assume the meaning didn't change + * twice in between, i.e. the meaning is unchanged for the "?" chipset. Usually we assume that + * succeeding hardware supports the same functionality as its predecessor unless proven different by + * tests or documentation, hence "?" will often be implemented equally to "<-". + * + * Chipset support matrix for SPI Base_Addr (LPC PCI reg 0xa0) + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze + * 3 rsvd <- <- ? <- ? RouteTpm2Spi + * 2 rsvd AbortEnable rsvd ? <- ? <- + * 1 rsvd SpiRomEnable <- ? <- ? <- + * 0 rsvd AltSpiCSEnable rsvd ? <- ? <- */ - msg_pdbg("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n", - tmp & 0x1, (tmp & 0x20) >> 5); - tmp = mmio_readl(sb600_spibar); - /* FIXME: If SpiAccessMacRomEn or SpiHostAccessRomEn are zero on - * SB700 or later, reads and writes will be corrupted. Abort in this - * case. Make sure to avoid this check on SB600. + if (amd_gen >= CHIPSET_SB7XX) { + tmp = pci_read_long(dev, 0xa0); + msg_pdbg("SpiRomEnable=%i", (tmp >> 1) & 0x1); + if (amd_gen == CHIPSET_SB7XX) + msg_pdbg(", AltSpiCSEnable=%i, AbortEnable=%i", tmp & 0x1, (tmp >> 2) & 0x1); + + tmp = pci_read_byte(dev, 0xba); + msg_pdbg(", PrefetchEnSPIFromIMC=%i", (tmp & 0x4) >> 2); + + tmp = pci_read_byte(dev, 0xbb); + /* FIXME: Set bit 3,6,7 if not already set. + * Set bit 5, otherwise SPI accesses are pointless in LPC mode. + * See doc 42413 AMD SB700/710/750 RPR. + */ + if (amd_gen == CHIPSET_SB7XX) + msg_pdbg(", SpiOpEnInLpcMode=%i", (tmp >> 5) & 0x1); + msg_pdbg(", PrefetchEnSPIFromHost=%i\n", tmp & 0x1); + } + + /* Chipset support matrix for SPI_Cntrl0 (spibar + 0x0) + * See the chipset support matrix for SPI Base_Addr above for an explanation of the symbols used. + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze + * 17 rsvd <- <- ? <- ? <- + * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0] + * 19 SpiArbEnable <- <- ? <- ? <- + * 20 (FifoPtrClr) <- <- ? <- ? <- + * 21 (FifoPtrInc) <- <- ? <- ? IllegalAccess + * 22 SpiAccessMacRomEn <- <- ? <- ? <- + * 23 SpiHostAccessRomEn <- <- ? <- ? <- + * 24:26 ArbWaitCount <- <- ? <- ? <- + * 27 SpiBridgeDisable <- <- ? <- ? rsvd + * 28 rsvd DropOneClkOnRd = SPIClkGate ? <- ? <- + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] + * 31 rsvd <- SpiBusy ? <- ? <- */ - msg_pdbg("(0x%08" PRIx32 ") fastReadEnable=%u, SpiArbEnable=%i, SpiAccessMacRomEn=%i, " - "SpiHostAccessRomEn=%i, ArbWaitCount=%i, " - "SpiBridgeDisable=%i, DropOneClkOnRd=%i\n", - tmp, (tmp >> 18) & 0x1, - (tmp >> 19) & 0x1, (tmp >> 22) & 0x1, - (tmp >> 23) & 0x1, (tmp >> 24) & 0x7, - (tmp >> 27) & 0x1, (tmp >> 28) & 0x1); + tmp = mmio_readl(sb600_spibar + 0x00); + msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); + + msg_pdbg(", SpiAccessMacRomEn=%i, SpiHostAccessRomEn=%i, ArbWaitCount=%i", + (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7); + + if (amd_gen != CHIPSET_YANGTZE) + msg_pdbg(", SpiBridgeDisable=%i", (tmp >> 27) & 0x1); + + switch (amd_gen) { + case CHIPSET_SB7XX: + msg_pdbg(", DropOneClkOnRd/SpiClkGate=%i", (tmp >> 28) & 0x1); + case CHIPSET_SB89XX: + case CHIPSET_HUDSON234: + msg_pdbg(", SpiBusy=%i", (tmp >> 31) & 0x1); + default: break; + } + msg_pdbg("\n"); + + if (((tmp >> 22) & 0x1) == 0 || ((tmp >> 23) & 0x1) == 0) { + msg_perr("ERROR: State of SpiAccessMacRomEn or SpiHostAccessRomEn prohibits full access.\n"); + return ERROR_NONFATAL; + } + tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; msg_pdbg("NormSpeed is %s MHz\n", speed_names[tmp]); + if (amd_gen >= CHIPSET_SB89XX) { + tmp = mmio_readb(sb600_spibar + 0x1D); + msg_pdbg("Using SPI_CS%d\n", tmp & 0x3); + } + /* Look for the SMBus device. */ smbus_dev = pci_dev_find(0x1002, 0x4385); if (!smbus_dev) {

1 0

[PATCH 2/2] sbxxx: Set SPI clock to 16.5 MHz and disable fast reads.
by Stefan Tauner 12 Sep '13

12 Sep '13

Do not rely on broken firmware to set up the SPI configuration correctly. Some boards fail with flashrom because the firmware chose too high speeds for the alternate SPI mode which flashrom uses. Temporarily change the clock to the lowest common value of 16.5 MHz. Also, disable fast reads just to be safe. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- sb600spi.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 63 insertions(+), 8 deletions(-) diff --git a/sb600spi.c b/sb600spi.c index febeabb..91268c0 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -272,6 +272,62 @@ static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, return 0; } +struct spispeed { + const char *const name; + const int8_t speed; +}; + +static const struct spispeed spispeeds[] = { + { "66 MHz", 0x00 }, + { "33 MHz", 0x01 }, + { "22 MHz", 0x02 }, + { "16.5 MHz", 0x03 }, +}; + +static int set_speed(struct pci_dev *dev, const struct spispeed *spispeed) +{ + bool success = false; + uint8_t speed = spispeed->speed; + + msg_pdbg("Setting SPI clock to %s (0x%x).\n", spispeed->name, speed); + if (amd_gen != CHIPSET_YANGTZE) { + rmmio_writeb((mmio_readb(sb600_spibar + 0xd) & ~(0x3 << 4)) | (speed << 4), sb600_spibar + 0xd); + success = (speed == ((mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3)); + } + + if (!success) { + msg_perr("Setting SPI clock failed.\n"); + return 1; + } + return 0; +} + +static int handle_speed(struct pci_dev *dev) +{ + uint32_t tmp; + int8_t spispeed_idx = 3; /* Default to 16.5 MHz */ + + /* See the chipset support matrix for SPI Base_Addr below for an explanation of the symbols used. + * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson234 yangtze + * 18 rsvd <- fastReadEnable ? <- ? SpiReadMode[0] + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] + */ + if (amd_gen != CHIPSET_YANGTZE) { + if (amd_gen >= CHIPSET_SB89XX && amd_gen <= CHIPSET_HUDSON234) { + bool fast_read = (mmio_readl(sb600_spibar + 0x00) >> 18) & 0x1; + msg_pdbg("Fast Reads are %sabled\n", fast_read ? "en" : "dis"); + if (fast_read) { + msg_pdbg("Disabling them temporarily.\n"); + rmmio_writel(mmio_readl(sb600_spibar + 0x00) & ~(0x1 << 18), + sb600_spibar + 0x00); + } + } + tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; + msg_pdbg("NormSpeed is %s\n", spispeeds[tmp].name); + } + return set_speed(dev, &spispeeds[spispeed_idx]); +} + static int sb600_handle_imc(struct pci_dev *dev, bool amd_imc_force) { /* Handle IMC everywhere but sb600 which does not have one. */ @@ -322,9 +378,6 @@ int sb600_probe_spi(struct pci_dev *dev) uint32_t tmp; uint8_t reg; bool amd_imc_force = false; - static const char *const speed_names[4] = { - "66/reserved", "33", "22", "16.5" - }; char *arg = extract_programmer_param("amd_imc_force"); if (arg && !strcmp(arg, "yes")) { @@ -411,7 +464,7 @@ int sb600_probe_spi(struct pci_dev *dev) * See the chipset support matrix for SPI Base_Addr above for an explanation of the symbols used. * bit 6xx 7xx/SP5100 8xx 9xx hudson1 hudson2+ yangtze * 17 rsvd <- <- ? <- ? <- - * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0] + * 18 rsvd <- fastReadEnable<1> ? <- ? SpiReadMode[0]<1> * 19 SpiArbEnable <- <- ? <- ? <- * 20 (FifoPtrClr) <- <- ? <- ? <- * 21 (FifoPtrInc) <- <- ? <- ? IllegalAccess @@ -420,8 +473,10 @@ int sb600_probe_spi(struct pci_dev *dev) * 24:26 ArbWaitCount <- <- ? <- ? <- * 27 SpiBridgeDisable <- <- ? <- ? rsvd * 28 rsvd DropOneClkOnRd = SPIClkGate ? <- ? <- - * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1] + * 29:30 rsvd <- <- ? <- ? SpiReadMode[2:1]<1> * 31 rsvd <- SpiBusy ? <- ? <- + * + * <1> see handle_speed */ tmp = mmio_readl(sb600_spibar + 0x00); msg_pdbg("(0x%08" PRIx32 ") SpiArbEnable=%i", tmp, (tmp >> 19) & 0x1); @@ -447,9 +502,6 @@ int sb600_probe_spi(struct pci_dev *dev) return ERROR_NONFATAL; } - tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; - msg_pdbg("NormSpeed is %s MHz\n", speed_names[tmp]); - if (amd_gen >= CHIPSET_SB89XX) { tmp = mmio_readb(sb600_spibar + 0x1D); msg_pdbg("Using SPI_CS%d\n", tmp & 0x3); @@ -494,6 +546,9 @@ int sb600_probe_spi(struct pci_dev *dev) return 0; } + if (handle_speed(dev) != 0) + return ERROR_FATAL; + if (sb600_handle_imc(dev, amd_imc_force) != 0) return ERROR_FATAL; -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Makefile: Warn if user tries to compile for libpayload w/o crossgcc.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Thu, 29 Aug 2013 03:05:46 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > While flashrom is not as picky on compilers as coreboot, there is still a > high probablilty of breakage when one combines libpayload and distribution > compilers. Print a warning if we detect that to give the daring user a hint how > to resolve the explosions potentially following below it. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> r1740 -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1740 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 16:04:31 2013 New Revision: 1740 URL: http://flashrom.org/trac/flashrom/changeset/1740 Log: Makefile: Warn if user tries to compile for libpayload w/o crossgcc. While flashrom is not as picky on compilers as coreboot, there is still a high probablilty of breakage when one combines libpayload and distribution compilers. Print a warning if we detect that to give the daring user a hint how to resolve the explosions potentially following below it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Sep 12 10:38:23 2013 (r1739) +++ trunk/Makefile Thu Sep 12 16:04:31 2013 (r1740) @@ -734,6 +734,11 @@ @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ ( echo "unknown. Aborting."; exit 1) @printf "%s\n" '$(TARGET_OS)' +ifeq ($(TARGET_OS), libpayload) + @$(CC) --version 2>&1 | grep -q coreboot || \ + ( echo "Warning: It seems you are not using coreboot's reference compiler."; \ + echo "This might work but usually does not, please beware." ) +endif define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */

1 0

Re: [flashrom] [PATCH] nicintel_eeprom: New programmer for Intel Nics eeproms
by Stefan Tauner 12 Sep '13

12 Sep '13

On Thu, 12 Sep 2013 11:25:39 +0200 Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> wrote: > ping? Hi Ricardo, I would have hoped for a more generic patch that adds some eeprom-specific infrastructure, but your approach seems to be legit when implementing this with the current infrastructure in flashrom. Sorry for not mentioning the opaque API before, that is of course the easiest way to get such things to work. Would it be even possible to probe for IDs of the EEPROMs with the interface on the Intel NICs? What EEPROM model(s) do see on your boards? I have not reviewed your patch in detail yet. There are probably a few coding style issues etc., but we can fix that ourselves if we have to. The bigger question is if we want to add something like it at all. I don't see good reason why we should not, but I need to discuss this with my colleague(s) (and that usually takes more time than one would expect). In any case your code is out there and can be used even if it does not get merged into vanilla flashrom eventually and your work is much appreciated, thank you. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [PATCH] Fix ROM decoding on VIA VT82C596 and VT82C686A/B.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Mon, 12 Aug 2013 22:19:50 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > These support an additional bit which we did not turn on yet. > Without this patch they decode up to 512 kB, with this up to 1 MB. > > Disentangle the enables of unrelated but mostly compatible chipsets > too, add some more debug output and set the max_rom_decode limits. > Also, make warnings really only warnings. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Self-acked and committed in r1739. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1739 - trunk
by repository service 12 Sep '13

12 Sep '13

Author: stefanct Date: Thu Sep 12 10:38:23 2013 New Revision: 1739 URL: http://flashrom.org/trac/flashrom/changeset/1739 Log: Fix ROM decoding on VIA VT82C596 and VT82C686A/B. These support an additional bit which we did not turn on yet. Without this patch they decode up to 512 kB, with this up to 1 MB. Disentangle the enables of unrelated but mostly compatible chipsets too, add some more debug output and set the max_rom_decode limits. Also, make warnings really only warnings. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Thu Sep 12 10:29:06 2013 (r1738) +++ trunk/chipset_enable.c Thu Sep 12 10:38:23 2013 (r1739) @@ -884,22 +884,29 @@ return 0; } -/* Works for AMD-8111, VIA VT82C586A/B, VIA VT82C686A/B. */ -static int enable_flash_amd8111(struct pci_dev *dev, const char *name) +/* Works for AMD-768, AMD-8111, VIA VT82C586A/B, VIA VT82C596, VIA VT82C686A/B. + * + * ROM decode control register matrix + * AMD-768 AMD-8111 VT82C586A/B VT82C596 VT82C686A/B + * 7 FFC0_0000h–FFFF_FFFFh <- FFFE0000h-FFFEFFFFh <- <- + * 6 FFB0_0000h–FFBF_FFFFh <- FFF80000h-FFFDFFFFh <- <- + * 5 00E8... <- <- FFF00000h-FFF7FFFFh <- + */ +static int enable_flash_amd_via(struct pci_dev *dev, const char *name, uint8_t decode_val) { #define AMD_MAPREG 0x43 #define AMD_ENREG 0x40 uint8_t old, new; - /* Enable decoding at 0xffb00000 to 0xffffffff. */ old = pci_read_byte(dev, AMD_MAPREG); - new = old | 0xC0; + new = old | decode_val; if (new != old) { rpci_write_byte(dev, AMD_MAPREG, new); if (pci_read_byte(dev, AMD_MAPREG) != new) { - msg_pinfo("Setting register 0x%x to 0x%02x on %s failed (WARNING ONLY).\n", + msg_pwarn("Setting register 0x%x to 0x%02x on %s failed (WARNING ONLY).\n", AMD_MAPREG, new, name); - } + } else + msg_pdbg("Changed ROM decode range to 0x%02x successfully.\n", new); } /* Enable 'ROM write' bit. */ @@ -910,14 +917,37 @@ rpci_write_byte(dev, AMD_ENREG, new); if (pci_read_byte(dev, AMD_ENREG) != new) { - msg_pinfo("Setting register 0x%x to 0x%02x on %s failed (WARNING ONLY).\n", + msg_pwarn("Setting register 0x%x to 0x%02x on %s failed (WARNING ONLY).\n", AMD_ENREG, new, name); - return -1; + return ERROR_NONFATAL; } + msg_pdbg2("Set ROM enable bit successfully.\n"); return 0; } +static int enable_flash_amd_768_8111(struct pci_dev *dev, const char *name) +{ + /* Enable decoding of 0xFFB00000 to 0xFFFFFFFF (5 MB). */ + max_rom_decode.lpc = 5 * 1024 * 1024; + return enable_flash_amd_via(dev, name, 0xC0); +} + +static int enable_flash_vt82c586(struct pci_dev *dev, const char *name) +{ + /* Enable decoding of 0xFFF80000 to 0xFFFFFFFF. (512 kB) */ + max_rom_decode.parallel = 512 * 1024; + return enable_flash_amd_via(dev, name, 0xC0); +} + +/* Works for VT82C686A/B too. */ +static int enable_flash_vt82c596(struct pci_dev *dev, const char *name) +{ + /* Enable decoding of 0xFFF80000 to 0xFFFFFFFF. (1 MB) */ + max_rom_decode.parallel = 1024 * 1024; + return enable_flash_amd_via(dev, name, 0xE0); +} + static int enable_flash_sb600(struct pci_dev *dev, const char *name) { uint32_t prot; @@ -1304,8 +1334,8 @@ {0x1022, 0x2080, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x2090, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x3000, OK, "AMD", "Elan SC520", get_flashbase_sc520}, - {0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd8111}, - {0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111}, + {0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd_768_8111}, + {0x1022, 0x7468, OK, "AMD", "AMD-8111", enable_flash_amd_768_8111}, {0x1022, 0x780e, OK, "AMD", "FCH", enable_flash_sb600}, {0x1039, 0x0406, NT, "SiS", "501/5101/5501", enable_flash_sis501}, {0x1039, 0x0496, NT, "SiS", "85C496+497", enable_flash_sis85c496}, @@ -1390,9 +1420,9 @@ {0x1106, 0x0691, OK, "VIA", "VT82C69x", via_no_byte_merge}, {0x1106, 0x8601, NT, "VIA", "VT8601T", via_no_byte_merge}, /* VIA southbridges */ - {0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111}, - {0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111}, - {0x1106, 0x0686, OK, "VIA", "VT82C686A/B", enable_flash_amd8111}, + {0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_vt82c586}, + {0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_vt82c596}, + {0x1106, 0x0686, OK, "VIA", "VT82C686A/B", enable_flash_vt82c596}, {0x1106, 0x3074, OK, "VIA", "VT8233", enable_flash_vt823x}, {0x1106, 0x3147, OK, "VIA", "VT8233A", enable_flash_vt823x}, {0x1106, 0x3177, OK, "VIA", "VT8235", enable_flash_vt823x},

1 0

Re: [flashrom] [PATCH] Enable sector erase function for selected ST M50 chips.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Tue, 27 Aug 2013 12:43:07 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Affected chips: M50FLW040A, M50FLW040B, M50FLW080A, M50FLW080B. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Self-acked and committed in r1738. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 2/2] Add support for ST M50LPW080.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Mon, 26 Aug 2013 22:40:15 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Self-acked and committed in r1737. The user did not reply in time. :( -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/2] Cleanup ST M50 driver.
by Stefan Tauner 12 Sep '13

12 Sep '13

On Mon, 26 Aug 2013 22:40:14 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > There are two locking strategies used by this umbrella family, one uniform > and one that matches the sector layout of the chip. Refactor the functions > involved and rename the overly complicated file to just stm50.c and the > functions accordingly. > > This fixes unlocking for some of the non-uniform chips, gets rid of the abuse > of page_size > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Self-acked and committed in r1736. The user did not reply in time. :( -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom