- flashrom - mail.coreboot.org

Re: [flashrom] [PATCH] [rfc/demo] implementation of the Thinkpad T20/T21/T22 host
by Carl-Daniel Hailfinger 13 Feb '10

13 Feb '10

On 16.01.2010 13:54, Michael Karcher wrote: > This mainboard uses external pins for banking the ROM chip, which seems > to be impossible to do with the "internal" programmer, yet I had to clone > most of the init stuff from internal.c . Hints for a clean implementation > will be appreciated. > It would be possible to make a copy of the selected struct programmer array element before running programmer_init, and have the programmer-specific programmer_init change the function pointers on the fly. In your case, we'd change all chip_{read,write}[bwln] and {un,}map_flash_region pointers inside a board enable function. With register_shutdown it should be possible to have your shutdown function run in the intended place. > --- > Makefile | 2 +- > flash.h | 11 ++++++ > flashrom.c | 19 ++++++++++ > t20.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 139 insertions(+), 1 deletions(-) > create mode 100644 t20.c > > diff --git a/Makefile b/Makefile > index 501f65a..cdd45d1 100644 > --- a/Makefile > +++ b/Makefile > @@ -101,7 +101,7 @@ CONFIG_PRINT_WIKI ?= no > > ifeq ($(CONFIG_INTERNAL), yes) > FEATURE_CFLAGS += -D'INTERNAL_SUPPORT=1' > -PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o > +PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o it87spi.o ichspi.o sb600spi.o t20.o wbsio_spi.o > NEED_PCI := yes > endif > > diff --git a/flash.h b/flash.h > index 9a25c70..77b0d48 100644 > --- a/flash.h > +++ b/flash.h > @@ -58,6 +58,9 @@ enum programmer { > #if INTERNAL_SUPPORT == 1 > PROGRAMMER_IT87SPI, > #endif > +#if INTERNAL_SUPPORT == 1 > + PROGRAMMER_TPT20, > +#endif > #if FT2232_SPI_SUPPORT == 1 > PROGRAMMER_FT2232SPI, > #endif > @@ -435,6 +438,14 @@ uint8_t drkaiser_chip_readb(const chipaddr addr); > extern struct pcidev_status drkaiser_pcidev[]; > #endif > > +/* t20.c */ > +#if INTERNAL_SUPPORT == 1 > +int t20_init(void); > +int t20_shutdown(void); > +void t20_chip_writeb(uint8_t val, chipaddr addr); > +uint8_t t20_chip_readb(const chipaddr addr); > +#endif > + > /* satasii.c */ > #if SATASII_SUPPORT == 1 > int satasii_init(void); > diff --git a/flashrom.c b/flashrom.c > index db44c2f..7f05eeb 100644 > --- a/flashrom.c > +++ b/flashrom.c > @@ -226,6 +226,25 @@ const struct programmer_entry programmer_table[] = { > }, > #endif > > +#if INTERNAL_SUPPORT == 1 > + { > + .name = "t20", > + .init = t20_init, > + .shutdown = t20_shutdown, > + .map_flash_region = fallback_map, > + .unmap_flash_region = fallback_unmap, > + .chip_readb = t20_chip_readb, > + .chip_readw = fallback_chip_readw, > + .chip_readl = fallback_chip_readl, > + .chip_readn = fallback_chip_readn, > + .chip_writeb = t20_chip_writeb, > + .chip_writew = fallback_chip_writew, > + .chip_writel = fallback_chip_writel, > + .chip_writen = fallback_chip_writen, > + .delay = internal_delay, > + }, > +#endif > + > #if FT2232_SPI_SUPPORT == 1 > { > .name = "ft2232spi", > diff --git a/t20.c b/t20.c > new file mode 100644 > index 0000000..d6841cc > --- /dev/null > +++ b/t20.c > @@ -0,0 +1,108 @@ > +/* > + * This file is part of the flashrom project. > + * > + * Copyright (C) 2010 Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > + */ > + > +/* Base address of register IND1 in the Field IMGA in the DSDT */ > +#define IMGA1_BASE 0x15EE > It would be great if we could get this info from a live system, and not have to rely on hardcoding it (may depend on BIOS version, installed hardware etc.). No idea if it is possible to ask ACPI about that value (at least without including a big ACPI parser in flashrom). > + > +#include "flash.h" > + > +static uint8_t *t20_base; > + > +#define MAX_COUNT 20 > + > +static void imga1_mask(uint8_t index, uint8_t mask, uint8_t value) > This function can fail. Should it return int instead of void? > +{ > + uint16_t temp; > + int count = 0; > + /* Be careful, as ACPI might use these registers too, so check > + that the index is still OK. */ > Comment style nitpick: Please start the second and following lines of a multiline comment with * and terminate such comments on a separate line. I don't see the "Be careful" motto mentioned above in the code below. If ACPI accesses IMGA1_BASE, we will pretty sure mess up ACPI accesses there. It's a race condition, and since we are not in control of ACPI, there is nothing we can do to reduce impact on the ACPI code. Besides that, there is a time window between the last INW and the final OUTW where anything can happen. > + do { > + OUTB(index, IMGA1_BASE); > + temp = INW(IMGA1_BASE); > OUTB, but INW. Is there a reason for the size mismatch? > + } > + while ((temp & 0xff) != index && ++count < MAX_COUNT); > Minor coding style nitpick: The while statement should be on the same line as the closing brace. > + if(count == MAX_COUNT) > + { > + printf("error: IMGA1 index stuck at %02x\n", temp & 0xff); > + return; > + } > + temp &= ~(mask << 8); > OK, maybe I've stared at such code too often, but given that mask is uint8_t and shifting happens inside brackets, isn't the compiler free to treat the calculation inside brackets as yielding an uint8_t as well, causing the contents of the bracket to be always zero, or to wrap around the bitshift at an 8-bit boundary, causing the contents of the bracket to be unshifted? I would have expected a cast of mask to uint16_t. > + temp |= (value & mask) << 8; > + OUTW(temp, IMGA1_BASE); > To be honest, the code flow in this function seems obvious at first, and on a second look it becomes an example of clever (maybe even too clever) coding. A few comments about the behaviour of IMGA1_BASE would be very appreciated. So far it seems that IMGA1_BASE is used to refer to two registers, namely an index/value pair. The OUTW is a trick to get an atomic write of index+value (is that guaranteed to be atomic by the x86 ISA?), a similar explanation probably applies to the INW. > +} > + > +int t20_init(void) > +{ > + pacc = pci_alloc(); > + pci_init(pacc); > + pci_scan_bus(pacc); /* We want to get the list of devices */ > + get_io_perms(); > I'm not 100% sure if the ordering above is correct. On some fringe platform, we might have to get IO permission before scanning the PCI bus. This is only a minor nitpick, not a hard requirement. > + /* ID of the graphics chip in T20/T21/T22. The mainboards are > + identical in these models */ > + if (!pci_card_find(0x5333, 0x8c12, 0x1014, 0x017f)) > + { > + msg_perr("This is not a ThinkPad T20/T21/T22\n"); > + return 1; > + } > IMHO the matching is too loose here. I'd like to see an additional DMI match and/or a second PCI device match. > + if (chipset_flash_enable() == -2) { > + printf("WARNING: No chipset found. Flash detection " > + "will most likely fail.\n"); > + } > What if the chipset enable returns -1? > + > + imga1_mask(0, 4, 4); /* Enable flash writes */ > + t20_base = physmap("IBM T20 mainboard flash", 0xFFFE0000, 0x20000); > A comment about the address used for physmap would be very nice, even if it is just "The EC maps a window of the flash chip to 4G-0x20000". > + buses_supported = CHIP_BUSTYPE_PARALLEL; > + return 0; > +} > + > +int t20_shutdown(void) > +{ > + physunmap(t20_base, 0x20000); > + imga1_mask(0, 4, 4); /* Disable flash writes */ > + release_io_perms(); > + pci_cleanup(pacc); > + return 0; > +} > + > +static unsigned int currentbank = -1U; > You could move currentbank inside switchtobank. Not sure if that is a good idea, though. > + > +static void switchtobank(unsigned int banknum) > +{ > + if (banknum > 3) > + { > + msg_perr("Bad bank number %d\n", banknum); > + return; > + } > + if(banknum != currentbank) > + imga1_mask(0, 3, banknum); > + currentbank = banknum; > +} > + > +void t20_chip_writeb(uint8_t val, chipaddr addr) > +{ > + switchtobank(addr >> 17); > + mmio_writeb(val, t20_base + (addr & 0x1FFFF)); > +} > + > +uint8_t t20_chip_readb(chipaddr addr) > +{ > + switchtobank(addr >> 17); > + return mmio_readb(t20_base + (addr & 0x1FFFF)); > +} > Overall, I like the patch and will probably ack it next time. Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

[patch] NetBSD/amd64 build fix
by Jonathan A. Kollasch 13 Feb '10

13 Feb '10

Use uname -p instead of -m on NetBSD so we get the right architecture library name. Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> ---

1 0

[PATCH] Avoid SPI RES if REMS is available
by Carl-Daniel Hailfinger 12 Feb '10

12 Feb '10

SPI RES is the most unreliable way to identify chips because it only returns a 1-byte ID for most chips. For every given ID out there, probably a dozen incompatible flash chips match it. We already refuse to identify a chip with RES if that chip responds to RDID (3 bytes, good match), and with this patch we additionally refuse RES if the chip responds to REMS (2 bytes, still a good match). This increases matching accuracy a lot. Besides that, the RDID/REMS response checking has been cleaned up for better readability. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-spi_res_avoidance/spi.c =================================================================== --- flashrom-spi_res_avoidance/spi.c (Revision 896) +++ flashrom-spi_res_avoidance/spi.c (Arbeitskopie) @@ -385,17 +385,30 @@ { unsigned char readarr[3]; uint32_t id2; + const unsigned char allff[] = {0xff, 0xff, 0xff}; + const unsigned char all00[] = {0x00, 0x00, 0x00}; - /* Check if RDID was successful and did not return 0xff 0xff 0xff. - * In that case, RES is pointless. + /* Check if RDID is usable and does not return 0xff 0xff 0xff or + * 0x00 0x00 0x00. In that case, RES is pointless. */ - if (!spi_rdid(readarr, 3) && ((readarr[0] != 0xff) || - (readarr[1] != 0xff) || (readarr[2] != 0xff))) + if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) && + memcmp(readarr, all00, 3)) { + msg_cdbg("Ignoring RES in favour of RDID.\n"); return 0; + } + /* Check if REMS is usable and does not return 0xff 0xff or + * 0x00 0x00. In that case, RES is pointless. + */ + if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) && + memcmp(readarr, all00, JEDEC_REMS_INSIZE)) { + msg_cdbg("Ignoring RES in favour of REMS.\n"); + return 0; + } if (spi_res(readarr)) return 0; + /* FIXME: Handle the case where RES gives a 2-byte response. */ id2 = readarr[0]; printf_debug("%s: id 0x%x\n", __func__, id2); if (id2 != flash->model_id) -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

[commit] r899 - trunk
by repository service 12 Feb '10

12 Feb '10

Author: hailfinger Date: Fri Feb 12 20:37:25 2010 New Revision: 899 URL: http://flashrom.org/trac/coreboot/changeset/899 Log: SPI RES is the most unreliable way to identify chips because it only returns a 1-byte ID for most chips. For every given ID out there, probably a dozen incompatible flash chips match it. We already refuse to identify a chip with RES if that chip responds to RDID (3 bytes, good match), and with this patch we additionally refuse RES if the chip responds to REMS (2 bytes, still a good match). This increases matching accuracy a lot. Besides that, the RDID/REMS response checking has been cleaned up for better readability. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/spi.c Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Fri Feb 12 20:35:25 2010 (r898) +++ trunk/spi.c Fri Feb 12 20:37:25 2010 (r899) @@ -385,17 +385,30 @@ { unsigned char readarr[3]; uint32_t id2; + const unsigned char allff[] = {0xff, 0xff, 0xff}; + const unsigned char all00[] = {0x00, 0x00, 0x00}; - /* Check if RDID was successful and did not return 0xff 0xff 0xff. - * In that case, RES is pointless. + /* Check if RDID is usable and does not return 0xff 0xff 0xff or + * 0x00 0x00 0x00. In that case, RES is pointless. */ - if (!spi_rdid(readarr, 3) && ((readarr[0] != 0xff) || - (readarr[1] != 0xff) || (readarr[2] != 0xff))) + if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) && + memcmp(readarr, all00, 3)) { + msg_cdbg("Ignoring RES in favour of RDID.\n"); return 0; + } + /* Check if REMS is usable and does not return 0xff 0xff or + * 0x00 0x00. In that case, RES is pointless. + */ + if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) && + memcmp(readarr, all00, JEDEC_REMS_INSIZE)) { + msg_cdbg("Ignoring RES in favour of REMS.\n"); + return 0; + } if (spi_res(readarr)) return 0; + /* FIXME: Handle the case where RES gives a 2-byte response. */ id2 = readarr[0]; printf_debug("%s: id 0x%x\n", __func__, id2); if (id2 != flash->model_id)

1 0

[PATCH] Split hardware access from internal programmer
by Carl-Daniel Hailfinger 12 Feb '10

12 Feb '10

Linking in support for the internal programmer doesn't make sense if you only need hardware (ioport, memory) access. Split internal.c into internal.c and hwaccess.c. Note: This patch was created by "svn cp internal.c hwaccess.c" and then removing stuff from both files. That's why you can't apply the patch as-is before running the svn cp. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-internal_pci_split/hwaccess.c =================================================================== --- flashrom-internal_pci_split/hwaccess.c (Revision 896) +++ flashrom-internal_pci_split/hwaccess.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009,2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,7 +23,6 @@ #include <stdlib.h> #include <fcntl.h> #include <sys/types.h> -#include <sys/stat.h> #include <errno.h> #include "flash.h" @@ -31,77 +30,6 @@ int io_fd; #endif -#if NEED_PCI == 1 -struct pci_dev *pci_dev_find_filter(struct pci_filter filter) -{ - struct pci_dev *temp; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) - return temp; - - return NULL; -} - -struct pci_dev *pci_dev_find_vendorclass(uint16_t vendor, uint16_t class) -{ - struct pci_dev *temp; - struct pci_filter filter; - uint16_t tmp2; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) { - /* Read PCI class */ - tmp2 = pci_read_word(temp, 0x0a); - if (tmp2 == class) - return temp; - } - - return NULL; -} - -struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device) -{ - struct pci_dev *temp; - struct pci_filter filter; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - filter.device = device; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) - return temp; - - return NULL; -} - -struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device, - uint16_t card_vendor, uint16_t card_device) -{ - struct pci_dev *temp; - struct pci_filter filter; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - filter.device = device; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) { - if ((card_vendor == - pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID)) - && (card_device == - pci_read_word(temp, PCI_SUBSYSTEM_ID))) - return temp; - } - - return NULL; -} -#endif - void get_io_perms(void) { #if defined (__sun) && (defined(__i386) || defined(__amd64)) @@ -124,101 +52,6 @@ #endif } -#if INTERNAL_SUPPORT == 1 -struct superio superio = {}; - -void probe_superio(void) -{ - superio = probe_superio_ite(); -#if 0 /* Winbond SuperI/O code is not yet available. */ - if (superio.vendor == SUPERIO_VENDOR_NONE) - superio = probe_superio_winbond(); -#endif -} - -int internal_init(void) -{ - int ret = 0; - - get_io_perms(); - - /* Initialize PCI access for flash enables */ - pacc = pci_alloc(); /* Get the pci_access structure */ - /* Set all options you want -- here we stick with the defaults */ - pci_init(pacc); /* Initialize the PCI library */ - pci_scan_bus(pacc); /* We want to get the list of devices */ - - /* We look at the lbtable first to see if we need a - * mainboard specific flash enable sequence. - */ - coreboot_init(); - dmi_init(); - - /* Probe for the SuperI/O chip and fill global struct superio. */ - probe_superio(); - - /* try to enable it. Failure IS an option, since not all motherboards - * really need this to be done, etc., etc. - */ - ret = chipset_flash_enable(); - if (ret == -2) { - printf("WARNING: No chipset found. Flash detection " - "will most likely fail.\n"); - } - - board_flash_enable(lb_vendor, lb_part); - - /* Even if chipset init returns an error code, we don't want to abort. - * The error code might have been a warning only. - * Besides that, we don't check the board enable return code either. - */ - return 0; -} - -int internal_shutdown(void) -{ - release_io_perms(); - - return 0; -} -#endif - -void internal_chip_writeb(uint8_t val, chipaddr addr) -{ - mmio_writeb(val, (void *) addr); -} - -void internal_chip_writew(uint16_t val, chipaddr addr) -{ - mmio_writew(val, (void *) addr); -} - -void internal_chip_writel(uint32_t val, chipaddr addr) -{ - mmio_writel(val, (void *) addr); -} - -uint8_t internal_chip_readb(const chipaddr addr) -{ - return mmio_readb((void *) addr); -} - -uint16_t internal_chip_readw(const chipaddr addr) -{ - return mmio_readw((void *) addr); -} - -uint32_t internal_chip_readl(const chipaddr addr) -{ - return mmio_readl((void *) addr); -} - -void internal_chip_readn(uint8_t *buf, const chipaddr addr, size_t len) -{ - memcpy(buf, (void *)addr, len); - return; -} - void mmio_writeb(uint8_t val, void *addr) { *(volatile uint8_t *) addr = val; Index: flashrom-internal_pci_split/hwaccess.h =================================================================== --- flashrom-internal_pci_split/hwaccess.h (Revision 896) +++ flashrom-internal_pci_split/hwaccess.h (Arbeitskopie) @@ -133,10 +133,6 @@ #endif #endif -#if defined(__FreeBSD__) || defined(__DragonFly__) -extern int io_fd; -#endif - #if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); Index: flashrom-internal_pci_split/Makefile =================================================================== --- flashrom-internal_pci_split/Makefile (Revision 896) +++ flashrom-internal_pci_split/Makefile (Arbeitskopie) @@ -103,7 +103,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'INTERNAL_SUPPORT=1' -PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o +PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o internal.o NEED_PCI := yes endif @@ -180,12 +180,7 @@ ifeq ($(NEED_PCI), yes) LIBS += -lpci FEATURE_CFLAGS += -D'NEED_PCI=1' -PROGRAMMER_OBJS += pcidev.o physmap.o internal.o #FIXME: We need to move stuff - # from internal.c and pcidev.c to pci.c - # internal.c needs to be split - # into internal-programmer-only stuff - # and a support lib for all internal+pci - # based stuff. +PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o ifeq ($(OS_ARCH), NetBSD) LIBS += -lpciutils # The libpci we want. LIBS += -l$(shell uname -m) # For (i386|x86_64)_iopl(2). Index: flashrom-internal_pci_split/internal.c =================================================================== --- flashrom-internal_pci_split/internal.c (Revision 896) +++ flashrom-internal_pci_split/internal.c (Arbeitskopie) @@ -27,10 +27,6 @@ #include <errno.h> #include "flash.h" -#if defined(__FreeBSD__) || defined(__DragonFly__) -int io_fd; -#endif - #if NEED_PCI == 1 struct pci_dev *pci_dev_find_filter(struct pci_filter filter) { @@ -102,28 +98,6 @@ } #endif -void get_io_perms(void) -{ -#if defined (__sun) && (defined(__i386) || defined(__amd64)) - if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif defined(__FreeBSD__) || defined (__DragonFly__) - if ((io_fd = open("/dev/io", O_RDWR)) < 0) { -#else - if (iopl(3) != 0) { -#endif - fprintf(stderr, "ERROR: Could not get I/O privileges (%s).\n" - "You need to be root.\n", strerror(errno)); - exit(1); - } -} - -void release_io_perms(void) -{ -#if defined(__FreeBSD__) || defined(__DragonFly__) - close(io_fd); -#endif -} - #if INTERNAL_SUPPORT == 1 struct superio superio = {}; @@ -218,33 +192,3 @@ memcpy(buf, (void *)addr, len); return; } - -void mmio_writeb(uint8_t val, void *addr) -{ - *(volatile uint8_t *) addr = val; -} - -void mmio_writew(uint16_t val, void *addr) -{ - *(volatile uint16_t *) addr = val; -} - -void mmio_writel(uint32_t val, void *addr) -{ - *(volatile uint32_t *) addr = val; -} - -uint8_t mmio_readb(void *addr) -{ - return *(volatile uint8_t *) addr; -} - -uint16_t mmio_readw(void *addr) -{ - return *(volatile uint16_t *) addr; -} - -uint32_t mmio_readl(void *addr) -{ - return *(volatile uint32_t *) addr; -} -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

[commit] r898 - trunk
by repository service 12 Feb '10

12 Feb '10

Author: hailfinger Date: Fri Feb 12 20:35:25 2010 New Revision: 898 URL: http://flashrom.org/trac/coreboot/changeset/898 Log: Linking in support for the internal programmer doesn't make sense if you only need hardware (ioport, memory) access. Split internal.c into internal.c and hwaccess.c. Note: This patch was created by "svn cp internal.c hwaccess.c" and then removing stuff from both files. That's why you can't apply the patch as-is before running the svn cp. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Added: trunk/hwaccess.c - copied, changed from r896, trunk/internal.c Modified: trunk/Makefile trunk/hwaccess.h trunk/internal.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Feb 12 19:40:27 2010 (r897) +++ trunk/Makefile Fri Feb 12 20:35:25 2010 (r898) @@ -103,7 +103,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'INTERNAL_SUPPORT=1' -PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o +PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o internal.o NEED_PCI := yes endif @@ -180,12 +180,7 @@ ifeq ($(NEED_PCI), yes) LIBS += -lpci FEATURE_CFLAGS += -D'NEED_PCI=1' -PROGRAMMER_OBJS += pcidev.o physmap.o internal.o #FIXME: We need to move stuff - # from internal.c and pcidev.c to pci.c - # internal.c needs to be split - # into internal-programmer-only stuff - # and a support lib for all internal+pci - # based stuff. +PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o ifeq ($(OS_ARCH), NetBSD) LIBS += -lpciutils # The libpci we want. LIBS += -l$(shell uname -m) # For (i386|x86_64)_iopl(2). Copied and modified: trunk/hwaccess.c (from r896, trunk/internal.c) ============================================================================== --- trunk/internal.c Fri Feb 12 06:44:18 2010 (r896, copy source) +++ trunk/hwaccess.c Fri Feb 12 20:35:25 2010 (r898) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009,2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,7 +23,6 @@ #include <stdlib.h> #include <fcntl.h> #include <sys/types.h> -#include <sys/stat.h> #include <errno.h> #include "flash.h" @@ -31,77 +30,6 @@ int io_fd; #endif -#if NEED_PCI == 1 -struct pci_dev *pci_dev_find_filter(struct pci_filter filter) -{ - struct pci_dev *temp; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) - return temp; - - return NULL; -} - -struct pci_dev *pci_dev_find_vendorclass(uint16_t vendor, uint16_t class) -{ - struct pci_dev *temp; - struct pci_filter filter; - uint16_t tmp2; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) { - /* Read PCI class */ - tmp2 = pci_read_word(temp, 0x0a); - if (tmp2 == class) - return temp; - } - - return NULL; -} - -struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device) -{ - struct pci_dev *temp; - struct pci_filter filter; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - filter.device = device; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) - return temp; - - return NULL; -} - -struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device, - uint16_t card_vendor, uint16_t card_device) -{ - struct pci_dev *temp; - struct pci_filter filter; - - pci_filter_init(NULL, &filter); - filter.vendor = vendor; - filter.device = device; - - for (temp = pacc->devices; temp; temp = temp->next) - if (pci_filter_match(&filter, temp)) { - if ((card_vendor == - pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID)) - && (card_device == - pci_read_word(temp, PCI_SUBSYSTEM_ID))) - return temp; - } - - return NULL; -} -#endif - void get_io_perms(void) { #if defined (__sun) && (defined(__i386) || defined(__amd64)) @@ -124,101 +52,6 @@ #endif } -#if INTERNAL_SUPPORT == 1 -struct superio superio = {}; - -void probe_superio(void) -{ - superio = probe_superio_ite(); -#if 0 /* Winbond SuperI/O code is not yet available. */ - if (superio.vendor == SUPERIO_VENDOR_NONE) - superio = probe_superio_winbond(); -#endif -} - -int internal_init(void) -{ - int ret = 0; - - get_io_perms(); - - /* Initialize PCI access for flash enables */ - pacc = pci_alloc(); /* Get the pci_access structure */ - /* Set all options you want -- here we stick with the defaults */ - pci_init(pacc); /* Initialize the PCI library */ - pci_scan_bus(pacc); /* We want to get the list of devices */ - - /* We look at the lbtable first to see if we need a - * mainboard specific flash enable sequence. - */ - coreboot_init(); - dmi_init(); - - /* Probe for the SuperI/O chip and fill global struct superio. */ - probe_superio(); - - /* try to enable it. Failure IS an option, since not all motherboards - * really need this to be done, etc., etc. - */ - ret = chipset_flash_enable(); - if (ret == -2) { - printf("WARNING: No chipset found. Flash detection " - "will most likely fail.\n"); - } - - board_flash_enable(lb_vendor, lb_part); - - /* Even if chipset init returns an error code, we don't want to abort. - * The error code might have been a warning only. - * Besides that, we don't check the board enable return code either. - */ - return 0; -} - -int internal_shutdown(void) -{ - release_io_perms(); - - return 0; -} -#endif - -void internal_chip_writeb(uint8_t val, chipaddr addr) -{ - mmio_writeb(val, (void *) addr); -} - -void internal_chip_writew(uint16_t val, chipaddr addr) -{ - mmio_writew(val, (void *) addr); -} - -void internal_chip_writel(uint32_t val, chipaddr addr) -{ - mmio_writel(val, (void *) addr); -} - -uint8_t internal_chip_readb(const chipaddr addr) -{ - return mmio_readb((void *) addr); -} - -uint16_t internal_chip_readw(const chipaddr addr) -{ - return mmio_readw((void *) addr); -} - -uint32_t internal_chip_readl(const chipaddr addr) -{ - return mmio_readl((void *) addr); -} - -void internal_chip_readn(uint8_t *buf, const chipaddr addr, size_t len) -{ - memcpy(buf, (void *)addr, len); - return; -} - void mmio_writeb(uint8_t val, void *addr) { *(volatile uint8_t *) addr = val; Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Fri Feb 12 19:40:27 2010 (r897) +++ trunk/hwaccess.h Fri Feb 12 20:35:25 2010 (r898) @@ -133,10 +133,6 @@ #endif #endif -#if defined(__FreeBSD__) || defined(__DragonFly__) -extern int io_fd; -#endif - #if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Fri Feb 12 19:40:27 2010 (r897) +++ trunk/internal.c Fri Feb 12 20:35:25 2010 (r898) @@ -27,10 +27,6 @@ #include <errno.h> #include "flash.h" -#if defined(__FreeBSD__) || defined(__DragonFly__) -int io_fd; -#endif - #if NEED_PCI == 1 struct pci_dev *pci_dev_find_filter(struct pci_filter filter) { @@ -102,28 +98,6 @@ } #endif -void get_io_perms(void) -{ -#if defined (__sun) && (defined(__i386) || defined(__amd64)) - if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif defined(__FreeBSD__) || defined (__DragonFly__) - if ((io_fd = open("/dev/io", O_RDWR)) < 0) { -#else - if (iopl(3) != 0) { -#endif - fprintf(stderr, "ERROR: Could not get I/O privileges (%s).\n" - "You need to be root.\n", strerror(errno)); - exit(1); - } -} - -void release_io_perms(void) -{ -#if defined(__FreeBSD__) || defined(__DragonFly__) - close(io_fd); -#endif -} - #if INTERNAL_SUPPORT == 1 struct superio superio = {}; @@ -218,33 +192,3 @@ memcpy(buf, (void *)addr, len); return; } - -void mmio_writeb(uint8_t val, void *addr) -{ - *(volatile uint8_t *) addr = val; -} - -void mmio_writew(uint16_t val, void *addr) -{ - *(volatile uint16_t *) addr = val; -} - -void mmio_writel(uint32_t val, void *addr) -{ - *(volatile uint32_t *) addr = val; -} - -uint8_t mmio_readb(void *addr) -{ - return *(volatile uint8_t *) addr; -} - -uint16_t mmio_readw(void *addr) -{ - return *(volatile uint16_t *) addr; -} - -uint32_t mmio_readl(void *addr) -{ - return *(volatile uint32_t *) addr; -}

1 0

[PATCH] Fix Winbond W25X{10, 20, 40, 80} incorrect erase blocks
by Sean Nelson 12 Feb '10

12 Feb '10

Fix erase blocks for Winbond W25X* SPI chips. The Winbond W25X10 and related chips only have 4k and 64k blocks and only accept erase commands: 20h, d8h, and c7h. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 6

[commit] r897 - trunk
by repository service 12 Feb '10

12 Feb '10

Author: snelson Date: Fri Feb 12 19:40:27 2010 New Revision: 897 URL: http://flashrom.org/trac/coreboot/changeset/897 Log: Fix erase blocks for Winbond W25X{10,20,40,80} SPI chips. The Winbond W25X10 and related chips only have 4k and 64k blocks and only accept erase commands: 20h, d8h, and c7h. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Feb 12 06:44:18 2010 (r896) +++ trunk/flashchips.c Fri Feb 12 19:40:27 2010 (r897) @@ -5365,16 +5365,10 @@ .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5399,16 +5393,10 @@ .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5433,16 +5421,10 @@ .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5467,16 +5449,10 @@ .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } },

1 0

A8JM board_enable patch (was Re: A8JM flashrom unable to erase)
by James Lancaster 12 Feb '10

12 Feb '10

Adds support to board_enable.c for ASUS A8JM Notebooks (and possibly all A8J series) Signed-off-by: James Lancaster <deathstalker(a)gmail.com> --- I have now gotten it working. I would like to thank some of the people in IRC for trying to help. It came down to me seeing a few similar 945 + ICH7 and just trying (first randomly, then systematically) all the possible GPIO pins. Finding that one needs to raise GPIO pin 34 on the ich7. The rest was already supported. Of note: It does not include DMI matching. I think the PCI IDs will identify it (and possibly other A8J series) uniquely. It should work for any A8J_ laptop, but as I don't have any others I'm not absolutely certain. (I think they simply differ by video card. except possibly the A8JS.) An additional warning: Either 0.91 or r3844 (Currently on Jaunty) partially flashed the bios initially. I'm not sure how, and frankly, given the hours with a corrupted flash rom, I'm not going to experiment, unless someone has a specific idea.

1 1

HP Vectra VL420 SFF
by Mattias Mattsson 12 Feb '10

12 Feb '10

Hi, I'm trying to flash the latest BIOS-version on a HP Vectra VL420 SFF but it fails with latest flashrom (r811). This computer has a motherboard similiar to an ASUS P4B-MX, the HP board is even labeled "P4B-MX" on the board itself. Some differences though: The HP board uses an AMI BIOS while the ASUS seems to have an Award BIOS. Latest VL420-BIOS (version "JA.01.07US"): ftp://ftp.hp.com/pub/softpaq/sp30001-30500/sp30221.exe Info attached. Thanks! -mattias

2 5

Re: [flashrom] [PATCH] Fix DMI match logic
by Michael Karcher 12 Feb '10

12 Feb '10

Am Sonntag, den 07.02.2010, 00:48 +0100 schrieb Michael Karcher: > This bug slipped in on changing back match-specific to match-any > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > --- > dmi.c | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/dmi.c b/dmi.c > index d165e9f..f97aff7 100644 > --- a/dmi.c > +++ b/dmi.c > @@ -162,7 +162,8 @@ int dmi_match(const char *pattern) > return 0; > > for (i = 0;i < DMI_ID_INVALID; i++) > - return dmi_compare(dmistrings[i], pattern); > + if(dmi_compare(dmistrings[i], pattern)) > + return 1; > > return 0; > } ping? Regards, Michael Karcher

2 2

[commit] r896 - trunk
by repository service 12 Feb '10

12 Feb '10

Author: mkarcher Date: Fri Feb 12 06:44:18 2010 New Revision: 896 URL: http://flashrom.org/trac/coreboot/changeset/896 Log: Fix DMI match logic This bug slipped in on changing back match-specific to match-any Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dmi.c Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Fri Feb 12 00:03:53 2010 (r895) +++ trunk/dmi.c Fri Feb 12 06:44:18 2010 (r896) @@ -162,7 +162,8 @@ return 0; for (i = 0;i < DMI_ID_INVALID; i++) - return dmi_compare(dmistrings[i], pattern); + if(dmi_compare(dmistrings[i], pattern)) + return 1; return 0; }

1 0

[PATCH] Kill chip erase
by Carl-Daniel Hailfinger 12 Feb '10

12 Feb '10

At long last, the day has come, and we can bury full-chip erase once and for all. Back in November 2008(!) I proposed the first version of the flexible sector-based erase structure, and now we can finally rip out the old full-chip erase code without ill effects. Rejoice and party! Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-kill_chip_erase/flash.h =================================================================== --- flashrom-kill_chip_erase/flash.h (Revision 894) +++ flashrom-kill_chip_erase/flash.h (Arbeitskopie) @@ -184,21 +184,20 @@ /* * Indicate if flashrom has been tested with this flash chip and if * everything worked correctly. */ uint32_t tested; int (*probe) (struct flashchip *flash); /* Delay after "enter/exit ID mode" commands in microseconds. */ int probe_timing; - int (*erase) (struct flashchip *flash); /* * Erase blocks and associated erase function. Any chip erase function * is stored as chip-sized virtual block together with said function. */ struct block_eraser { struct eraseblock{ unsigned int size; /* Eraseblock size */ unsigned int count; /* Number of contiguous blocks with that size */ } eraseblocks[NUM_ERASEREGIONS]; Index: flashrom-kill_chip_erase/flashchips.c =================================================================== --- flashrom-kill_chip_erase/flashchips.c (Revision 894) +++ flashrom-kill_chip_erase/flashchips.c (Arbeitskopie) @@ -37,21 +37,20 @@ * .vendor = Vendor name * .name = Chip name * .bustype = Supported flash bus types (Parallel, LPC...) * .manufacture_id = Manufacturer chip ID * .model_id = Model chip ID * .total_size = Total size in (binary) kbytes * .page_size = Page or eraseblock(?) size in bytes * .tested = Test status * .probe = Probe function * .probe_timing = Probe function delay - * .erase = Chip erase function * .block_erasers[] = Array of erase layouts and erase functions * { * .eraseblocks[] = Array of { blocksize, blockcount } * .block_erase = Block erase function * } * .write = Chip write function * .read = Chip read function */ { @@ -59,21 +58,20 @@ .name = "Am29F010A/B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F010B, /* Same as Am29F010A */ .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -86,21 +84,20 @@ .name = "Am29F002(N)BB", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F002BB, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -118,21 +115,20 @@ .name = "Am29F002(N)BT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F002BT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -150,21 +146,20 @@ .name = "Am29F016D", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F016D, .total_size = 2 * 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -177,21 +172,20 @@ .name = "Am29F040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -204,21 +198,20 @@ .name = "Am29F080B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29F080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -231,21 +224,20 @@ .name = "Am29LV040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29LV040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -258,21 +250,20 @@ .name = "Am29LV081B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AM_29LV080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -285,21 +276,20 @@ .name = "AE49F2008", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ASD_ID, .model_id = ASD_AE49F2008, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -316,21 +306,20 @@ .vendor = "Atmel", .name = "AT25DF021", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF021, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, @@ -351,21 +340,20 @@ .vendor = "Atmel", .name = "AT25DF041A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF041A, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -386,21 +374,20 @@ .vendor = "Atmel", .name = "AT25DF081", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF081, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -421,21 +408,20 @@ .vendor = "Atmel", .name = "AT25DF161", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF161, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -456,21 +442,20 @@ .vendor = "Atmel", .name = "AT25DF321", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF321, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, @@ -491,21 +476,20 @@ .vendor = "Atmel", .name = "AT25DF321A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF321A, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, @@ -526,21 +510,20 @@ .vendor = "Atmel", .name = "AT25DF641", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF641, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, @@ -561,21 +544,20 @@ .vendor = "Atmel", .name = "AT25F512B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25F512B, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 2} }, @@ -596,21 +578,20 @@ .vendor = "Atmel", .name = "AT25FS010", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25FS010, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 4} }, @@ -631,21 +612,20 @@ .vendor = "Atmel", .name = "AT25FS040", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25FS040, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -666,21 +646,20 @@ .vendor = "Atmel", .name = "AT26DF041", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26DF041, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, } }, .write = NULL /* Incompatible Page write */, .read = spi_chip_read, }, @@ -689,21 +668,20 @@ .vendor = "Atmel", .name = "AT26DF081A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26DF081A, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -724,21 +702,20 @@ .vendor = "Atmel", .name = "AT26DF161", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26DF161, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -759,21 +736,20 @@ .vendor = "Atmel", .name = "AT26DF161A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26DF161A, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -795,37 +771,35 @@ .vendor = "Atmel", .name = "AT26DF321", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26DF321, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, .write = spi_chip_write_256, .read = spi_chip_read, },*/ { .vendor = "Atmel", .name = "AT26F004", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_26F004, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -847,21 +821,20 @@ .name = "AT29C512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_29C512, .total_size = 64, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, @@ -872,21 +845,20 @@ .name = "AT29C010A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_29C010A, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, /* FIXME */ .read = read_memmapped, }, @@ -896,21 +868,20 @@ .name = "AT29C020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_29C020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10ms */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -920,21 +891,20 @@ .name = "AT29C040A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_29C040A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10 ms */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -943,166 +913,156 @@ .vendor = "Atmel", .name = "AT45CS1282", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45CS1282, .total_size = 16896 /* No power of two sizes */, .page_size = 1056 /* No power of two sizes */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL /* Incompatible Page write */, .read = NULL /* Incompatible read */, }, { .vendor = "Atmel", .name = "AT45DB011D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB011D, .total_size = 128 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB021D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB021D, .total_size = 256 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB041D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB041D, .total_size = 512 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB081D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB081D, .total_size = 1024 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB161D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB161D, .total_size = 2048 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB321C", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB321C, .total_size = 4224 /* No power of two sizes */, .page_size = 528 /* No power of two sizes */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL /* Incompatible read */, }, { .vendor = "Atmel", .name = "AT45DB321D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB321D, .total_size = 4096 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT45DB642D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_45DB642D, .total_size = 8192 /* Size can only be determined from status register */, .page_size = 1024 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "AT49BV512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_49BV512, .total_size = 64, .page_size = 64, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, }, @@ -1112,21 +1072,20 @@ .name = "AT49F002(N)", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_49F002N, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -1144,21 +1103,20 @@ .name = "AT49F002(N)T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = AT_49F002NT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -1177,21 +1135,20 @@ .vendor = "AMIC", .name = "A25L40PT", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L40P, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1209,21 +1166,20 @@ .vendor = "AMIC", .name = "A25L40PU", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L40P, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 7}, }, @@ -1242,21 +1198,20 @@ .name = "A29002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -1274,21 +1229,20 @@ .name = "A29002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -1306,21 +1260,20 @@ .name = "A29040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -1333,21 +1286,20 @@ .name = "A49LF040A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A49LF040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -1360,21 +1312,20 @@ .name = "F49B002UA", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EMST_ID, .model_id = EMST_F49B002UA, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -1391,21 +1342,20 @@ .vendor = "Eon", .name = "EN25B05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, }, .block_erase = spi_block_erase_d8, @@ -1422,21 +1372,20 @@ .vendor = "Eon", .name = "EN25B05T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, @@ -1453,21 +1402,20 @@ .vendor = "Eon", .name = "EN25B10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 3}, }, .block_erase = spi_block_erase_d8, @@ -1484,21 +1432,20 @@ .vendor = "Eon", .name = "EN25B10T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 3}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, @@ -1515,21 +1462,20 @@ .vendor = "Eon", .name = "EN25B20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 3} }, @@ -1547,21 +1493,20 @@ .vendor = "Eon", .name = "EN25B20T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1579,21 +1524,20 @@ .vendor = "Eon", .name = "EN25B40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 7} }, @@ -1611,21 +1555,20 @@ .vendor = "Eon", .name = "EN25B40T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1643,21 +1586,20 @@ .vendor = "Eon", .name = "EN25B80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 15} }, @@ -1675,21 +1617,20 @@ .vendor = "Eon", .name = "EN25B80T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1707,21 +1648,20 @@ .vendor = "Eon", .name = "EN25B16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 31}, }, @@ -1739,21 +1679,20 @@ .vendor = "Eon", .name = "EN25B16T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1771,21 +1710,20 @@ .vendor = "Eon", .name = "EN25B32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 63}, }, @@ -1803,21 +1741,20 @@ .vendor = "Eon", .name = "EN25B32T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 63}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1835,21 +1772,20 @@ .vendor = "Eon", .name = "EN25B64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 127}, }, @@ -1867,21 +1803,20 @@ .vendor = "Eon", .name = "EN25B64T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, @@ -1899,21 +1834,20 @@ .vendor = "Eon", .name = "EN25D16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25D16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -1934,21 +1868,20 @@ .vendor = "Eon", .name = "EN25F05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 2} }, @@ -1969,21 +1902,20 @@ .vendor = "Eon", .name = "EN25F10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 4} }, @@ -2004,21 +1936,20 @@ .vendor = "Eon", .name = "EN25F20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 4} }, @@ -2039,21 +1970,20 @@ .vendor = "Eon", .name = "EN25F40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F40, .total_size = 512, .page_size = 256, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -2071,21 +2001,20 @@ .vendor = "Eon", .name = "EN25F80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -2103,21 +2032,20 @@ .vendor = "Eon", .name = "EN25F16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, @@ -2135,21 +2063,20 @@ .vendor = "Eon", .name = "EN25F32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, @@ -2168,21 +2095,20 @@ .name = "EN29F002(A)(N)B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EN_29F002B, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -2200,21 +2126,20 @@ .name = "EN29F002(A)(N)T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EN_29F002T, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -2232,21 +2157,20 @@ .name = "MBM29F004BC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = MBM29F004BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = erase_sector_jedec, @@ -2264,21 +2188,20 @@ .name = "MBM29F004TC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = MBM29F004TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -2297,21 +2220,20 @@ .name = "MBM29F400BC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = MBM29F400BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = block_erase_m29f400bt, @@ -2329,21 +2251,20 @@ .name = "MBM29F400TC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = MBM29F400TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = block_erase_m29f400bt, @@ -2361,21 +2282,20 @@ .name = "28F001BX-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = P28F001BXB, .total_size = 128, .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ .feature_bits = 0, .tested = TEST_BAD_WRITE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {112 * 1024, 1}, }, .block_erase = erase_82802ab_block, }, @@ -2389,21 +2309,20 @@ .name = "28F001BX-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = P28F001BXT, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ .feature_bits = 0, .tested = TEST_BAD_WRITE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {112 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 1}, }, .block_erase = erase_82802ab_block, }, @@ -2417,21 +2336,20 @@ .name = "82802AB", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, .model_id = I_82802AB, .total_size = 512, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_82802ab_block, }, }, .write = write_82802ab, .read = read_memmapped, }, @@ -2441,21 +2359,20 @@ .name = "82802AC", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, .model_id = I_82802AC, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_82802ab_block, }, }, .write = write_82802ab, .read = read_memmapped, }, @@ -2464,21 +2381,20 @@ .vendor = "Macronix", .name = "MX25L512", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L512, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, @@ -2499,21 +2415,20 @@ .vendor = "Macronix", .name = "MX25L1005", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L1005, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, @@ -2531,21 +2446,20 @@ .vendor = "Macronix", .name = "MX25L2005", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L2005, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, @@ -2566,21 +2480,20 @@ .vendor = "Macronix", .name = "MX25L4005", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L4005, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -2601,21 +2514,20 @@ .vendor = "Macronix", .name = "MX25L8005", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L8005, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -2636,21 +2548,20 @@ .vendor = "Macronix", .name = "MX25L1605", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L1605, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, /* This erase function has 64k blocksize for eLiteFlash */ }, { .eraseblocks = { {64 * 1024, 32} }, /* Not supported in MX25L1605 (eLiteFlash) and MX25L1605D */ .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -2671,21 +2582,20 @@ .vendor = "Macronix", .name = "MX25L1635D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L1635D, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, @@ -2703,21 +2613,20 @@ .vendor = "Macronix", .name = "MX25L3205", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L3205, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, @@ -2735,21 +2644,20 @@ .vendor = "Macronix", .name = "MX25L3235D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L3235D, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, @@ -2767,21 +2675,20 @@ .vendor = "Macronix", .name = "MX25L6405", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L6405, .total_size = 8192, .page_size = 256, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, @@ -2799,21 +2706,20 @@ .vendor = "Macronix", .name = "MX25L12805", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L12805, .total_size = 16384, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, @@ -2832,21 +2738,20 @@ .name = "MX29F001B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F001B, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 1}, }, @@ -2865,21 +2770,20 @@ .name = "MX29F001T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F001T, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 1}, {32 * 1024, 1}, {8 * 1024, 2}, {4 * 1024, 2}, {8 * 1024, 1}, }, @@ -2898,21 +2802,20 @@ .name = "MX29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -2930,21 +2833,20 @@ .name = "MX29F002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -2962,21 +2864,20 @@ .name = "MX29LV040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29LV040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -2988,21 +2889,20 @@ .vendor = "Numonyx", .name = "M25PE10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, @@ -3017,21 +2917,20 @@ .vendor = "Numonyx", .name = "M25PE20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -3046,21 +2945,20 @@ .vendor = "Numonyx", .name = "M25PE40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -3075,21 +2973,20 @@ .vendor = "Numonyx", .name = "M25PE80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE80, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -3104,21 +3001,20 @@ .vendor = "Numonyx", .name = "M25PE16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, @@ -3133,21 +3029,20 @@ .vendor = "PMC", .name = "Pm25LV010", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV010, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, @@ -3162,21 +3057,20 @@ .vendor = "PMC", .name = "Pm25LV016B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV016B, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -3197,21 +3091,20 @@ .vendor = "PMC", .name = "Pm25LV020", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV020, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -3226,21 +3119,20 @@ .vendor = "PMC", .name = "Pm25LV040", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV040, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -3255,21 +3147,20 @@ .vendor = "PMC", .name = "Pm25LV080B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV080B, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -3290,21 +3181,20 @@ .vendor = "PMC", .name = "Pm25LV512", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = PMC_25LV512, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, @@ -3320,21 +3210,20 @@ .name = "Pm29F002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_29F002T, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -3352,21 +3241,20 @@ .name = "Pm29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_29F002B, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -3384,21 +3272,20 @@ .name = "Pm39LV010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_39F010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, @@ -3414,21 +3301,21 @@ .name = "Pm49FL002", .bustype = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH, /* A/A Mux*/ .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_49FL002, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, /* Was: erase_49fl00x */ + /* .erase = NULL, Was: erase_49fl00x */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -3444,21 +3331,21 @@ .name = "Pm49FL004", .bustype = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH, /* A/A Mux*/ .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_49FL004, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, /* Was: erase_49fl00x */ + /* .erase = NULL, Was: erase_49fl00x */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -3473,21 +3360,20 @@ .vendor = "Sanyo", .name = "LF25FW203A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW203A, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3500,21 +3386,20 @@ .name = "LHF00L04", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SHARP_ID, .model_id = SHARP_LHF00L04, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 15}, {8 * 1024, 8} }, .block_erase = erase_lhf00l04_block, }, { .eraseblocks = { @@ -3531,21 +3416,20 @@ .vendor = "Spansion", .name = "S25FL008A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL008A, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3557,21 +3441,20 @@ .vendor = "Spansion", .name = "S25FL016A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL016A, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3583,21 +3466,20 @@ .vendor = "SST", .name = "SST25VF016B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF016B, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -3618,21 +3500,20 @@ .vendor = "SST", .name = "SST25VF032B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF032B, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, @@ -3653,21 +3534,20 @@ .vendor = "SST", .name = "SST25VF040.REMS", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF040_REMS, .total_size = 512, .page_size = 256, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -3682,21 +3562,20 @@ .vendor = "SST", .name = "SST25VF040B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF040B, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -3717,21 +3596,20 @@ .vendor = "SST", .name = "SST25VF040B.REMS", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF040B_REMS, .total_size = 512, .page_size = 256, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -3752,21 +3630,20 @@ .vendor = "SST", .name = "SST25VF080B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = SST_25VF080B, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -3788,21 +3665,20 @@ .name = "SST28SF040A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_28SF040, .total_size = 512, .page_size = 256, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_28sf040, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst28sf040.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128, 4096} }, .block_erase = erase_sector_28sf040, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_28sf040, } }, @@ -3815,21 +3691,20 @@ .name = "SST29EE010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_29EE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -3839,21 +3714,20 @@ .name = "SST29LE010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_29LE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -3863,21 +3737,20 @@ .name = "SST29EE020A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_29EE020A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -3887,21 +3760,20 @@ .name = "SST29LE020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_29LE020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -3911,21 +3783,20 @@ .name = "SST39SF512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39SF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -3938,21 +3809,20 @@ .name = "SST39SF010A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39SF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -3965,21 +3835,20 @@ .name = "SST39SF020A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39SF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -3992,21 +3861,20 @@ .name = "SST39SF040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39SF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4019,21 +3887,20 @@ .name = "SST39VF512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39VF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns*/ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4046,21 +3913,20 @@ .name = "SST39VF010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39VF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4073,21 +3939,20 @@ .name = "SST39VF020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39VF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4100,21 +3965,20 @@ .name = "SST39VF040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39VF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4127,21 +3991,20 @@ .name = "SST39VF080", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_39VF080, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -4157,21 +4020,20 @@ .name = "SST49LF002A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF002A, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PRW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sst_fwhub_sector, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_sst_fwhub_block, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -4187,21 +4049,20 @@ .name = "SST49LF003A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF003A, .total_size = 384, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 96} }, .block_erase = erase_sst_fwhub_sector, }, { .eraseblocks = { {64 * 1024, 6} }, .block_erase = erase_sst_fwhub_block, }, { .eraseblocks = { {384 * 1024, 1} }, @@ -4220,21 +4081,20 @@ .name = "SST49LF004A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF004A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, /* missing unlock */ }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sst_fwhub_block, /* same as erase_block_jedec, but with unlock */ }, { .eraseblocks = { {512 * 1024, 1} }, @@ -4250,21 +4110,20 @@ .name = "SST49LF004C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, .model_id = SST_49LF004C, .total_size = 512, .page_size = 4 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -4282,21 +4141,20 @@ .name = "SST49LF008A", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF008A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PRW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sst_fwhub_sector, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sst_fwhub_block, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -4312,21 +4170,20 @@ .name = "SST49LF008C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, .model_id = SST_49LF008C, .total_size = 1024, .page_size = 4 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -4344,21 +4201,20 @@ .name = "SST49LF016C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, .model_id = SST_49LF016C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -4376,21 +4232,20 @@ .name = "SST49LF020", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, .model_id = SST_49LF020, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -4406,21 +4261,20 @@ .name = "SST49LF020A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, .model_id = SST_49LF020A, .total_size = 256, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -4436,21 +4290,20 @@ .name = "SST49LF040", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, .model_id = SST_49LF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -4466,21 +4319,20 @@ .name = "SST49LF040B", .bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -4496,21 +4348,20 @@ .name = "SST49LF080A", .bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_49LF080A, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, @@ -4526,22 +4377,21 @@ .name = "SST49LF160C", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, .model_id = SST_49LF160C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = erase_49lfxxxc, - .erase = NULL, + /* .erase = NULL, Was: erase_49flxxxc */ .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, @@ -4558,21 +4408,20 @@ .vendor = "ST", .name = "M25P05-A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P05A, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4589,21 +4438,20 @@ .vendor = "ST", .name = "M25P05.RES", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4615,21 +4463,20 @@ .vendor = "ST", .name = "M25P10-A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P10A, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4642,21 +4489,20 @@ .vendor = "ST", .name = "M25P10.RES", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4668,21 +4514,20 @@ .vendor = "ST", .name = "M25P20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4694,21 +4539,20 @@ .vendor = "ST", .name = "M25P40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P40, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4720,21 +4564,20 @@ .vendor = "ST", .name = "M25P40-old", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4746,21 +4589,20 @@ .vendor = "ST", .name = "M25P80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P80, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4772,21 +4614,20 @@ .vendor = "ST", .name = "M25P16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P16, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4798,21 +4639,20 @@ .vendor = "ST", .name = "M25P32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P32, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4824,21 +4664,20 @@ .vendor = "ST", .name = "M25P64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4850,21 +4689,20 @@ .vendor = "ST", .name = "M25P128", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P128, .total_size = 16384, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4877,21 +4715,20 @@ .name = "M29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -4909,21 +4746,20 @@ .name = "M29F002T/NT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -4941,21 +4777,20 @@ .name = "M29F040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -4969,21 +4804,20 @@ .name = "M29F400BT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F400BT, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = block_erase_m29f400bt, @@ -5001,21 +4835,20 @@ .name = "M29W010B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W010B, .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -5028,21 +4861,20 @@ .name = "M29W040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -5055,21 +4887,20 @@ .name = "M29W512B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W512B, .total_size = 64, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, }, @@ -5079,21 +4910,20 @@ .name = "M50FLW040A", .bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {64 * 1024, 5}, /* block */ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, .block_erase = NULL, @@ -5114,21 +4944,20 @@ .name = "M50FLW040B", .bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ {64 * 1024, 5}, /* block */ {4 * 1024, 16}, /* sector */ }, .block_erase = NULL, @@ -5149,21 +4978,20 @@ .name = "M50FLW080A", .bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW080A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {64 * 1024, 13}, /* block */ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, .block_erase = NULL, @@ -5184,21 +5012,20 @@ .name = "M50FLW080B", .bustype = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ {64 * 1024, 13}, /* block */ {4 * 1024, 16}, /* sector */ }, .block_erase = NULL, @@ -5219,21 +5046,20 @@ .name = "M50FW002", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW002, .total_size = 256, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_stm50flw0x0x, @@ -5251,21 +5077,20 @@ .name = "M50FW016", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW016, .total_size = 2048, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 32}, }, .block_erase = erase_block_stm50flw0x0x, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, @@ -5278,21 +5103,20 @@ .name = "M50FW040", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_block_stm50flw0x0x, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, @@ -5305,21 +5129,20 @@ .name = "M50FW080", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW080, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16}, }, .block_erase = erase_block_stm50flw0x0x, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, @@ -5332,21 +5155,20 @@ .name = "M50LPW116", .bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50LPW116, .total_size = 2048, .page_size = 64 * 1024, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, {64 * 1024, 30}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, @@ -5365,21 +5187,20 @@ .name = "S29C31004T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SYNCMOS_ID, .model_id = S29C31004T, .total_size = 512, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {1 * 1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -5392,21 +5213,20 @@ .name = "S29C51001T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SYNCMOS_ID, .model_id = S29C51001T, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {512, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -5419,21 +5239,20 @@ .name = "S29C51002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SYNCMOS_ID, .model_id = S29C51002T, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {512, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -5446,21 +5265,20 @@ .name = "S29C51004T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SYNCMOS_ID, .model_id = S29C51004T, .total_size = 512, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {1 * 1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -5473,21 +5291,20 @@ .name = "TMS29F002RB", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = TI_OLD_ID, .model_id = TI_TMS29F002RB, .total_size = 256, .page_size = 16384, /* Non-uniform sectors */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, @@ -5505,21 +5322,20 @@ .name = "TMS29F002RT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = TI_OLD_ID, .model_id = TI_TMS29F002RT, .total_size = 256, .page_size = 16384, /* Non-uniform sectors */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -5536,21 +5352,20 @@ .vendor = "Winbond", .name = "W25x10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 2} }, @@ -5571,21 +5386,20 @@ .vendor = "Winbond", .name = "W25x20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, @@ -5606,21 +5420,20 @@ .vendor = "Winbond", .name = "W25x40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X40, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, @@ -5641,21 +5454,20 @@ .vendor = "Winbond", .name = "W25x80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X80, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -5676,21 +5488,20 @@ .vendor = "Winbond", .name = "W25x16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X16, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, @@ -5711,21 +5522,20 @@ .vendor = "Winbond", .name = "W25x32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X32, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, @@ -5746,21 +5556,20 @@ .vendor = "Winbond", .name = "W25x64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = W_25X64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, @@ -5782,21 +5591,20 @@ .name = "W29C011", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = W_29C011, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, /* used datasheet for the W29C011A */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -5806,21 +5614,20 @@ .name = "W29C020C", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = W_29C020C, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -5830,21 +5637,20 @@ .name = "W29C040P", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = W_29C040P, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -5854,21 +5660,20 @@ .name = "W29EE011", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = W_29C011, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PRW, .probe = probe_w29ee011, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w29ee011.c) */ - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, @@ -5878,21 +5683,20 @@ .name = "W39V040A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_39V040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -5905,21 +5709,20 @@ .name = "W39V040B", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_39V040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -5932,21 +5735,21 @@ .name = "W39V040C", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_39V040C, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_w39v040c */ + /* .erase = NULL, Was erase_w39v040c */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -5959,21 +5762,20 @@ .name = "W39V040FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, .model_id = W_39V040FA, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -5989,21 +5791,20 @@ .name = "W39V080A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_39V080A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -6016,21 +5817,20 @@ .name = "W49F002U", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = W_49F002U, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -6048,21 +5848,20 @@ .name = "W49V002A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_49V002A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -6080,21 +5879,20 @@ .name = "W49V002FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, .model_id = W_49V002FA, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, @@ -6112,21 +5910,21 @@ .name = "W39V080FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, .model_id = W_39V080FA, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_winbond_fwhub */ + /* .erase = NULL, Was erase_winbond_fwhub */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -6139,21 +5937,21 @@ .name = "W39V080FA (dual mode)", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, .model_id = W_39V080FA_DM, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_winbond_fwhub */ + /* .erase = NULL, Was erase_winbond_fwhub */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -6165,140 +5963,131 @@ .vendor = "Atmel", .name = "unknown Atmel SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "EON", .name = "unknown EON SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Macronix", .name = "unknown Macronix SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "PMC", .name = "unknown PMC SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "SST", .name = "unknown SST SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "ST", .name = "unknown ST SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Sanyo", .name = "unknown Sanyo SPI chip", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SANYO_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, { .vendor = "Generic", .name = "unknown SPI chip (RDID)", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = GENERIC_MANUF_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, - .erase = NULL, .write = NULL, }, { .vendor = "Generic", .name = "unknown SPI chip (REMS)", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = GENERIC_MANUF_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rems, - .erase = NULL, .write = NULL, }, { NULL } }; Index: flashrom-kill_chip_erase/flashrom.c =================================================================== --- flashrom-kill_chip_erase/flashrom.c (Revision 894) +++ flashrom-kill_chip_erase/flashrom.c (Arbeitskopie) @@ -968,26 +968,20 @@ if (ret) break; done += eraser.eraseblocks[i].count * eraser.eraseblocks[i].size; } printf_debug("\n"); /* If everything is OK, don't try another erase function. */ if (!ret) break; } - /* If no block erase function was found or block erase failed, retry. */ - if ((!found || ret) && (flash->erase)) { - found = 1; - printf_debug("Trying whole-chip erase function... "); - ret = flash->erase(flash); - } if (!found) { fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); return 1; } if (ret) { fprintf(stderr, "FAILED!\n"); } else { printf("SUCCESS.\n"); } -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

[commit] r895 - trunk
by repository service 12 Feb '10

12 Feb '10

Author: hailfinger Date: Fri Feb 12 00:03:53 2010 New Revision: 895 URL: http://flashrom.org/trac/coreboot/changeset/895 Log: At long last, the day has come, and we can bury full-chip erase once and for all. Back in November 2008(!) I proposed the first version of the flexible sector-based erase structure, and now we can finally rip out the old full-chip erase code without ill effects. Rejoice and party! Thanks to everyone who made this possible, especially to Sean Nelson who converted the majority of flash chips to sector erase. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/flash.h trunk/flashchips.c trunk/flashrom.c Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Feb 11 12:28:37 2010 (r894) +++ trunk/flash.h Fri Feb 12 00:03:53 2010 (r895) @@ -191,7 +191,6 @@ /* Delay after "enter/exit ID mode" commands in microseconds. */ int probe_timing; - int (*erase) (struct flashchip *flash); /* * Erase blocks and associated erase function. Any chip erase function Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Feb 11 12:28:37 2010 (r894) +++ trunk/flashchips.c Fri Feb 12 00:03:53 2010 (r895) @@ -44,7 +44,6 @@ * .tested = Test status * .probe = Probe function * .probe_timing = Probe function delay - * .erase = Chip erase function * .block_erasers[] = Array of erase layouts and erase functions * { * .eraseblocks[] = Array of { blocksize, blockcount } @@ -66,7 +65,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -93,7 +91,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -125,7 +122,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -157,7 +153,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -184,7 +179,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -211,7 +205,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -238,7 +231,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -265,7 +257,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -292,7 +283,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -323,7 +313,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -358,7 +347,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -393,7 +381,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -428,7 +415,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -463,7 +449,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -498,7 +483,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -533,7 +517,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -568,7 +551,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -603,7 +585,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -638,7 +619,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -673,7 +653,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -696,7 +675,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -731,7 +709,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -766,7 +743,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -802,7 +778,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, .write = spi_chip_write_256, .read = spi_chip_read, },*/ @@ -818,7 +793,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -854,7 +828,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ - .erase = NULL, .block_erasers = { { @@ -879,7 +852,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ - .erase = NULL, .block_erasers = { { @@ -903,7 +875,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10ms */ - .erase = NULL, .block_erasers = { { @@ -927,7 +898,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10 ms */ - .erase = NULL, .block_erasers = { { @@ -950,7 +920,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL /* Incompatible Page write */, .read = NULL /* Incompatible read */, }, @@ -966,7 +935,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -982,7 +950,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -998,7 +965,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -1014,7 +980,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -1030,7 +995,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -1046,7 +1010,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL /* Incompatible read */, }, @@ -1062,7 +1025,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -1078,7 +1040,6 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -1095,7 +1056,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -1119,7 +1079,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -1151,7 +1110,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -1184,7 +1142,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1216,7 +1173,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1249,7 +1205,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -1281,7 +1236,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -1313,7 +1267,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -1340,7 +1293,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, .block_erasers = { { @@ -1367,7 +1319,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -1398,7 +1349,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1429,7 +1379,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1460,7 +1409,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1491,7 +1439,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1522,7 +1469,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1554,7 +1500,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1586,7 +1531,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1618,7 +1562,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1650,7 +1593,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1682,7 +1624,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1714,7 +1655,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1746,7 +1686,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1778,7 +1717,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1810,7 +1748,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1842,7 +1779,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1874,7 +1810,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1906,7 +1841,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1941,7 +1875,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -1976,7 +1909,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2011,7 +1943,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2046,7 +1977,6 @@ .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2078,7 +2008,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2110,7 +2039,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2142,7 +2070,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2175,7 +2102,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2207,7 +2133,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2239,7 +2164,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2271,7 +2195,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2304,7 +2227,6 @@ .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { @@ -2336,7 +2258,6 @@ .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { @@ -2368,7 +2289,6 @@ .tested = TEST_BAD_WRITE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2396,7 +2316,6 @@ .tested = TEST_BAD_WRITE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -2424,7 +2343,6 @@ .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { @@ -2448,7 +2366,6 @@ .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { @@ -2471,7 +2388,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2506,7 +2422,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2538,7 +2453,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2573,7 +2487,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2608,7 +2521,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2643,7 +2555,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2678,7 +2589,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2710,7 +2620,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2742,7 +2651,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2774,7 +2682,6 @@ .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2806,7 +2713,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -2839,7 +2745,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -2872,7 +2777,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -2905,7 +2809,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -2937,7 +2840,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -2969,7 +2871,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ - .erase = NULL, .block_erasers = { { @@ -2995,7 +2896,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3024,7 +2924,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3053,7 +2952,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3082,7 +2980,6 @@ .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3111,7 +3008,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3140,7 +3036,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3169,7 +3064,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3204,7 +3098,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3233,7 +3126,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3262,7 +3154,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3297,7 +3188,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3327,7 +3217,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -3359,7 +3248,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -3391,7 +3279,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -3421,7 +3308,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, /* Was: erase_49fl00x */ + /* .erase = NULL, Was: erase_49fl00x */ .block_erasers = { { @@ -3451,7 +3338,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .erase = NULL, /* Was: erase_49fl00x */ + /* .erase = NULL, Was: erase_49fl00x */ .block_erasers = { { @@ -3480,7 +3367,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3507,7 +3393,6 @@ .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3538,7 +3423,6 @@ .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3564,7 +3448,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3590,7 +3473,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3625,7 +3507,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3660,7 +3541,6 @@ .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3689,7 +3569,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3724,7 +3603,6 @@ .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3759,7 +3637,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -3795,7 +3672,6 @@ .tested = TEST_UNTESTED, .probe = probe_28sf040, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst28sf040.c) */ - .erase = NULL, .block_erasers = { { @@ -3822,7 +3698,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -3846,7 +3721,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -3870,7 +3744,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -3894,7 +3767,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -3918,7 +3790,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -3945,7 +3816,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -3972,7 +3842,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -3999,7 +3868,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4026,7 +3894,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns*/ - .erase = NULL, .block_erasers = { { @@ -4053,7 +3920,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4080,7 +3946,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4107,7 +3972,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4134,7 +3998,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4164,7 +4027,6 @@ .tested = TEST_OK_PRW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { @@ -4194,7 +4056,6 @@ .tested = TEST_OK_PR, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { @@ -4227,7 +4088,6 @@ .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { @@ -4257,7 +4117,6 @@ .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { @@ -4289,7 +4148,6 @@ .tested = TEST_OK_PRW, .probe = probe_sst_fwhub, .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { @@ -4319,7 +4177,6 @@ .tested = TEST_UNTESTED, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { @@ -4351,7 +4208,6 @@ .tested = TEST_OK_PRW, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { @@ -4383,7 +4239,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4413,7 +4268,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4443,7 +4297,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ - .erase = NULL, .block_erasers = { { @@ -4473,7 +4326,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ - .erase = NULL, .block_erasers = { { @@ -4503,7 +4355,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -4533,8 +4384,7 @@ .tested = TEST_OK_PRW, .probe = probe_49lfxxxc, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = erase_49lfxxxc, - .erase = NULL, + /* .erase = NULL, Was: erase_49flxxxc */ .block_erasers = { { @@ -4565,7 +4415,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4596,7 +4445,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4622,7 +4470,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4649,7 +4496,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4675,7 +4521,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4701,7 +4546,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4727,7 +4571,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_res, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4753,7 +4596,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4779,7 +4621,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4805,7 +4646,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4831,7 +4671,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4857,7 +4696,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -4884,7 +4722,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -4916,7 +4753,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -4948,7 +4784,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */ - .erase = NULL, .block_erasers = { { @@ -4976,7 +4811,6 @@ .tested = TEST_UNTESTED, .probe = probe_m29f400bt, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */ - .erase = NULL, .block_erasers = { { @@ -5008,7 +4842,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5035,7 +4868,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5062,7 +4894,6 @@ .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5086,7 +4917,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -5121,7 +4951,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -5156,7 +4985,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -5191,7 +5019,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, - .erase = NULL, .block_erasers = { { @@ -5226,7 +5053,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ - .erase = NULL, .block_erasers = { { @@ -5258,7 +5084,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { @@ -5285,7 +5110,6 @@ .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { @@ -5312,7 +5136,6 @@ .tested = TEST_OK_PRW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ - .erase = NULL, .block_erasers = { { @@ -5339,7 +5162,6 @@ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5372,7 +5194,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5399,7 +5220,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5426,7 +5246,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5453,7 +5272,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5480,7 +5298,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5512,7 +5329,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .erase = NULL, .block_erasers = { { @@ -5543,7 +5359,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5578,7 +5393,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5613,7 +5427,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5648,7 +5461,6 @@ .tested = TEST_OK_PRW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5683,7 +5495,6 @@ .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5718,7 +5529,6 @@ .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5753,7 +5563,6 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .block_erasers = { { @@ -5789,7 +5598,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, /* used datasheet for the W29C011A */ - .erase = NULL, .block_erasers = { { @@ -5813,7 +5621,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -5837,7 +5644,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -5861,7 +5667,6 @@ .tested = TEST_OK_PRW, .probe = probe_w29ee011, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w29ee011.c) */ - .erase = NULL, .block_erasers = { { @@ -5885,7 +5690,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -5912,7 +5716,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -5939,7 +5742,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_w39v040c */ + /* .erase = NULL, Was erase_w39v040c */ .block_erasers = { { @@ -5966,7 +5769,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -5996,7 +5798,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -6023,7 +5824,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -6055,7 +5855,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -6087,7 +5886,6 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, - .erase = NULL, .block_erasers = { { @@ -6119,7 +5917,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_winbond_fwhub */ + /* .erase = NULL, Was erase_winbond_fwhub */ .block_erasers = { { @@ -6146,7 +5944,7 @@ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, - .erase = NULL, /* Was erase_winbond_fwhub */ + /* .erase = NULL, Was erase_winbond_fwhub */ .block_erasers = { { @@ -6172,7 +5970,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6188,7 +5985,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6204,7 +6000,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6220,7 +6015,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6236,7 +6030,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6252,7 +6045,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6268,7 +6060,6 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = NULL, .write = NULL, .read = NULL, }, @@ -6283,7 +6074,6 @@ .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, - .erase = NULL, .write = NULL, }, { @@ -6296,7 +6086,6 @@ .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rems, - .erase = NULL, .write = NULL, }, Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Feb 11 12:28:37 2010 (r894) +++ trunk/flashrom.c Fri Feb 12 00:03:53 2010 (r895) @@ -975,12 +975,6 @@ if (!ret) break; } - /* If no block erase function was found or block erase failed, retry. */ - if ((!found || ret) && (flash->erase)) { - found = 1; - printf_debug("Trying whole-chip erase function... "); - ret = flash->erase(flash); - } if (!found) { fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); return 1;

1 0

[PATCH] Fix PIIX4 GPO set
by Michael Karcher 11 Feb '10

11 Feb '10

Intel datasheet says "byte accesses only". Looks like they mean it. Also fix use of or instead of and for lowering GPOs. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- The old version was slightly (ahem) broken, int that trying to lower one GPO pin, *all* other GPO pins were raised... board_enable.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-) diff --git a/board_enable.c b/board_enable.c index 5d89929..022195e 100644 --- a/board_enable.c +++ b/board_enable.c @@ -578,6 +578,7 @@ static int board_artecgroup_dbe6x(const char *name) */ static int intel_piix4_gpo_set(unsigned int gpo, int raise) { + unsigned int gpo_byte, gpo_bit; struct pci_dev *dev; uint32_t tmp, base; @@ -632,12 +633,14 @@ static int intel_piix4_gpo_set(unsigned int gpo, int raise) /* PM IO base */ base = pci_read_long(dev, 0x40) & 0x0000FFC0; - tmp = INL(base + 0x34); /* GPO register */ + gpo_byte = gpo >> 3; + gpo_bit = gpo & 7; + tmp = INB(base + 0x34 + gpo_byte); /* GPO register */ if (raise) - tmp |= 0x01 << gpo; + tmp |= 0x01 << gpo_bit; else - tmp |= ~(0x01 << gpo); - OUTL(tmp, base + 0x34); + tmp &= ~(0x01 << gpo_bit); + OUTB(tmp, base + 0x34 + gpo_byte); return 0; } -- 1.6.5

1 0

Re: [flashrom] [PATCH] Fix PIIX4 GPO set
by Michael Karcher 11 Feb '10

11 Feb '10

Hello Zach Stuart, could you please try this patch? You find it at http://patchwork.coreboot.org/patch/910/ Regards, Michael Karcher Am Donnerstag, den 11.02.2010, 19:48 +0100 schrieb Michael Karcher: > Intel datasheet says "byte accesses only". Looks like they mean it. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > --- > board_enable.c | 11 +++++++---- > 1 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/board_enable.c b/board_enable.c > index 5d89929..76b5a6a 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -578,6 +578,7 @@ static int board_artecgroup_dbe6x(const char *name) > */ > static int intel_piix4_gpo_set(unsigned int gpo, int raise) > { > + unsigned int gpo_byte, gpo_bit; > struct pci_dev *dev; > uint32_t tmp, base; > > @@ -632,12 +633,14 @@ static int intel_piix4_gpo_set(unsigned int gpo, int raise) > /* PM IO base */ > base = pci_read_long(dev, 0x40) & 0x0000FFC0; > > - tmp = INL(base + 0x34); /* GPO register */ > + gpo_byte = gpo >> 3; > + gpo_bit = gpo & 7; > + tmp = INB(base + 0x34 + gpo_byte); /* GPO register */ > if (raise) > - tmp |= 0x01 << gpo; > + tmp |= 0x01 << gpo_bit; > else > - tmp |= ~(0x01 << gpo); > - OUTL(tmp, base + 0x34); > + tmp |= ~(0x01 << gpo_bit); > + OUTB(tmp, base + 0x34 + gpo_byte); > > return 0; > }

1 0

Re: [flashrom] [PATCH] Board enable for Abit IP35 Pro
by Michael Karcher 11 Feb '10

11 Feb '10

[context: The story from the IRC channel is like this: Jordan Farrell did a BIOS upgrade where flashrom showed success, entered Setup after reboot, and the system behaved strange after the following reset: It turned itself off after some seconds. After that, he was back to the old BIOS version.] Am Samstag, den 06.02.2010, 00:51 +0100 schrieb Michael Karcher: > Am Freitag, den 05.02.2010, 22:42 +0100 schrieb Jordan Farrell: > I did not commit this patch as I did not yet get around to find out what > mechanism undoes the successfull flashing you observed. Now I took apart the whole BIOS image for your board, and I was unable to find any reflash code in it. What I did find was code that rewrites blocks 0 and 8 of your BIOS. Block zero contains ESCD stuff and I didn't work out what's exactly in block 8, but I the BIOS code itself is stored in blocks 1 to 7, CPU microcode updates are stored in blocks 12-14, and BIOS initialization code in blocks 14 and 15. Blocks 9 to 11 are unused. If your BIOS chip (the 32 pin PLCC one) really is the chip detected by flashrom and not a bigger chip that masquerades as the smaller one and contains the reflash code in the hidden part of it, I have no idea which code could reflash it, where the old ROM contents might be stored and how to prevent that. The standard AWDFLASH utility provided with your board does not seem to contain board-specific code, as this type of code is put to the BIOS instead. Could you please try again and double-check that the image you write is really the image you wanted to write, and that this image you want to write really is a newer version of the BIOS than the one you currently have in your flash chip? Regards, Michael Karcher

1 0

Failure report - Gigabyte 8I915ME (ver. C, I suppose)
by Peter Lemenkov 11 Feb '10

11 Feb '10

Hello All! I just tried to rewrite flashchip, but failed: Workplace ~/work/tmp.bios: sudo flashrom -w 8i9me.f6 flashrom v0.9.1-r893 No coreboot table found. Found ITE SuperI/O, id 8712 Found chipset "Intel ICH6/ICH6R", enabling flash write... OK. This chipset supports the following protocols: FWH. Calibrating delay loop... OK. Found chip "SST SST49LF003A/B" (384 KB, FWH) at physical address 0xfffa0000. === This flash part has status UNTESTED for operations: ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: 0000 at address: 0x00000000ERASE FAILED at 0x00000000! Expected=0xff, Read=0x22, failed byte count from 0x00000000-0x0000ffff: 0xfeec ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! Workplace ~/work/tmp.bios: Don't worry - I read bios chip before and after erase, and their md5 sum matches, so I believe, I didn't broke something fragile. Unfortunately, I can't say anything about particular version of the board (several slightly different versions were released - I suppose, that I have ver. C) -- With best regards, Peter Lemenkov.

1 0

Successfully re-flashed Gigabyte GA-MA74GM-S2H rev.3
by Peter Lemenkov 11 Feb '10

11 Feb '10

Hello All! Just for your reference - I just upgraded BIOS on this board with flashrom and rebooted the system. Everything works fine, and dmidecode reflects BIOS version changing from FC to FD. http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Prod… -- With best regards, Peter Lemenkov.

2 4

[PATCH] ICH SPI fixes/cleanup
by Carl-Daniel Hailfinger 11 Feb '10

11 Feb '10

This megapatch rewrites substantial parts of ICH SPI to actually do what the SPI layer wants instead of its own weird idea about commands (running unrequested commands, running modified commands). Besides that, there is a fair share of cleanups as well. - Add JEDEC_EWSR (Enable Write Status Register) to default commands. - Mark a no longer used opcode/preopcode table as unused. - Declare all commands as non-atomic/standalone by default. The ICH SPI driver has no business executing commands (preopcodes) automatically if they were not requested. - Automatically adjust preopcode/opcode pairings (like WREN+ERASE) based on what the SPI layer requested. The ICH SPI driver has no business executing altered opcode pairs as it sees fit. - Fix incomplete initialization in the case of a locked down chipset. Leaving the first 4 opcodes with uninitialized pairings had unpredictable results. - switch() exists for a reason. Nested if() checking on the same variable is an interesting style. - Actually check if the requested readcnt/writecnt for a command is supported by the hardware instead of delivering corrupt/incomplete commands and data. - If a command has unsupported readlen/writelen, complain loudly to the user. - Use find_opcode instead of open-coding the same stuff in a dozen variations. - Introduce infrastructure for updating the command set of unlocked chipsets on the fly. Untested. This will expose any bugs in the SPI layer (I know of one bug regarding write enables there), but the behaviour will now be consistent across all SPI drivers. Read/write/erase logs in full verbosity are appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ichspi_cleanup_checklen_lockedfix/ichspi.c =================================================================== --- flashrom-ichspi_cleanup_checklen_lockedfix/ichspi.c (Revision 807) +++ flashrom-ichspi_cleanup_checklen_lockedfix/ichspi.c (Arbeitskopie) @@ -5,6 +5,7 @@ * Copyright (C) 2008 Claus Gindhart <claus.gindhart(a)kontron.com> * Copyright (C) 2008 Dominik Geyer <dominik.geyer(a)kontron.com> * Copyright (C) 2008 coresystems GmbH <info(a)coresystems.de> + * Copyright (C) 2009 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -105,7 +106,7 @@ uint8_t atomic; //Use preop: (0: none, 1: preop0, 2: preop1 } OPCODE; -/* Opcode definition: +/* Suggested opcode definition: * Preop 1: Write Enable * Preop 2: Write Status register enable * @@ -115,7 +116,7 @@ * OP 3: Read Status register * OP 4: Read ID * OP 5: Write Status register - * OP 6: chip private (read JDEC id) + * OP 6: chip private (read JEDEC id) * OP 7: Chip erase */ typedef struct _OPCODES { @@ -156,6 +157,7 @@ uint8_t opcode; }; +/* List of opcodes which need preopcodes and matching preopcodes. Unused. */ struct preop_opcode_pair pops[] = { {JEDEC_WREN, JEDEC_BYTE_PROGRAM}, {JEDEC_WREN, JEDEC_SE}, /* sector erase */ @@ -163,24 +165,30 @@ {JEDEC_WREN, JEDEC_BE_D8}, /* block erase */ {JEDEC_WREN, JEDEC_CE_60}, /* chip erase */ {JEDEC_WREN, JEDEC_CE_C7}, /* chip erase */ + /* FIXME: WRSR requires either EWSR or WREN depending on chip type. */ + {JEDEC_WREN, JEDEC_WRSR}, {JEDEC_EWSR, JEDEC_WRSR}, {0,} }; +/* Reasonable default configuration. Needs ad-hoc modifications if we + * encounter unlisted opcodes. Fun. + */ OPCODES O_ST_M25P = { { JEDEC_WREN, - 0}, + JEDEC_EWSR, + }, { - {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Write Byte + {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Write Byte {JEDEC_READ, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Data - {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Erase Sector + {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Erase Sector {JEDEC_RDSR, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read Device Status Reg {JEDEC_REMS, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Electronic Manufacturer Signature - {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Write Status Register + {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Write Status Register {JEDEC_RDID, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read JDEC ID - {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Bulk erase - } + {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Bulk erase + } }; OPCODES O_EXISTING = {}; @@ -209,9 +217,10 @@ return -1; } +/* Create a struct OPCODES based on what we find in the locked down chipset. */ static int generate_opcodes(OPCODES * op) { - int a, b, i; + int a; uint16_t preop, optype; uint32_t opmenu[2]; @@ -257,17 +266,10 @@ opmenu[1] >>= 8; } - /* atomic (link opcode with required pre-op) */ - for (a = 4; a < 8; a++) + /* No preopcodes used by default. */ + for (a = 0; a < 8; a++) op->opcode[a].atomic = 0; - for (i = 0; pops[i].opcode; i++) { - a = find_opcode(op, pops[i].opcode); - b = find_preop(op, pops[i].preop); - if ((a != -1) && (b != -1)) - op->opcode[a].atomic = (uint8_t) ++b; - } - return 0; } @@ -431,14 +433,15 @@ temp16 |= ((uint16_t) (opcode_index & 0x07)) << 4; /* Handle Atomic */ - if (op.atomic != 0) { - /* Select atomic command */ + switch (op.atomic) { + case 2: + /* Select second preop. */ + temp16 |= SPIC_SPOP; + /* And fall through. */ + case 1: + /* Atomic command (preop+op) */ temp16 |= SPIC_ACS; - /* Select prefix opcode */ - if ((op.atomic - 1) == 1) { - /*Select prefix opcode 2 */ - temp16 |= SPIC_SPOP; - } + break; } /* Start */ @@ -548,14 +551,15 @@ temp32 |= ((uint32_t) (opcode_index & 0x07)) << (8 + 4); /* Handle Atomic */ - if (op.atomic != 0) { - /* Select atomic command */ + switch (op.atomic) { + case 2: + /* Select second preop. */ + temp32 |= SSFC_SPOP; + /* And fall through. */ + case 1: + /* Atomic command (preop+op) */ temp32 |= SSFC_ACS; - /* Selct prefix opcode */ - if ((op.atomic - 1) == 1) { - /*Select prefix opcode 2 */ - temp32 |= SSFC_SPOP; - } + break; } /* Start */ @@ -598,16 +602,28 @@ { switch (spi_controller) { case SPI_CONTROLLER_VIA: - if (datalength > 16) + if (datalength > 16) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich7_run_opcode(op, offset, datalength, data, 16); case SPI_CONTROLLER_ICH7: - if (datalength > 64) + if (datalength > 64) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich7_run_opcode(op, offset, datalength, data, 64); case SPI_CONTROLLER_ICH9: - if (datalength > 64) + if (datalength > 64) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich9_run_opcode(op, offset, datalength, data); default: printf_debug("%s: unsupported chipset\n", __func__); @@ -686,7 +702,6 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - int a; int result; int opcode_index = -1; const unsigned char cmd = *writearr; @@ -696,21 +711,54 @@ int count; /* find cmd in opcodes-table */ - for (a = 0; a < 8; a++) { - if ((curopcodes->opcode[a]).opcode == cmd) { - opcode_index = a; - break; - } - } - - /* unknown / not programmed command */ + opcode_index = find_opcode(curopcodes, cmd); if (opcode_index == -1) { + /* FIXME: Reprogram opcodes if possible. Autodetect type of + * opcode by checking readcnt/writecnt. + */ printf_debug("Invalid OPCODE 0x%02x\n", cmd); return SPI_INVALID_OPCODE; } opcode = &(curopcodes->opcode[opcode_index]); + /* The following valid writecnt/readcnt combinations exist: + * writecnt = 4, readcnt >= 0 + * writecnt = 1, readcnt >= 0 + * writecnt >= 4, readcnt = 0 + * writecnt >= 1, readcnt = 0 + * writecnt >= 1 is guaranteed for all commands. + */ + if ((opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS) && + (writecnt != 4)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want =4\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if ((opcode->spi_type == SPI_OPCODE_TYPE_READ_NO_ADDRESS) && + (writecnt != 1)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want =1\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if ((opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) && + (writecnt < 4)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want >=4\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if (((opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) || + (opcode->spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)) && + (readcnt)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got readcnt=%i, want =0\n", __func__, cmd, + readcnt); + return SPI_INVALID_LENGTH; + } + /* if opcode-type requires an address */ if (opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS || opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { @@ -741,23 +789,69 @@ int ich_spi_send_multicommand(struct spi_command *cmds) { int ret = 0; + int i; int oppos, preoppos; for (; (cmds->writecnt || cmds->readcnt) && !ret; cmds++) { - /* Is the next command valid or a terminator? */ if ((cmds + 1)->writecnt || (cmds + 1)->readcnt) { + /* Next command is valid. */ preoppos = find_preop(curopcodes, cmds->writearr[0]); oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]); - /* Is the opcode of the current command listed in the - * ICH struct OPCODES as associated preopcode for the - * opcode of the next command? + if ((oppos == -1) && (preoppos != -1)) { + /* Current command is listed as preopcode in + * ICH struct OPCODES, but next command is not + * listed as opcode in that struct. + * Check for command sanity, then + * try to reprogram the ICH opcode list. + */ + if (find_preop(curopcodes, + (cmds + 1)->writearr[0]) != -1) { + fprintf(stderr, "%s: Two subsequent " + "preopcodes 0x%02x and 0x%02x, " + "ignoring the first.\n", + __func__, cmds->writearr[0], + (cmds + 1)->writearr[0]); + continue; + } + /* If the chipset is locked down, we'll fail + * during execution of the next command anyway. + * No need to bother with fixups. + */ + if (!ichspi_lock) { + printf_debug("%s: FIXME: Add on-the-fly" + " reprogramming of the " + "chipset opcode list.\n", + __func__); + /* FIXME: Reprogram opcode menu. + * Find a less-useful opcode, replace it + * with the wanted opcode, detect optype + * and reprogram the opcode menu. + * Update oppos so the next if-statement + * can do something useful. + */ + //curopcodes.opcode[lessusefulindex] = (cmds + 1)->writearr[0]); + //update_optypes(curopcodes); + //program_opcodes(curopcodes); + //oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]); + continue; + } + } + if ((oppos != -1) && (preoppos != -1)) { + /* Current command is listed as preopcode in + * ICH struct OPCODES and next command is listed + * as opcode in that struct. Match them up. + */ + curopcodes->opcode[oppos].atomic = preoppos + 1; + continue; + } + /* If none of the above if-statements about oppos or + * preoppos matched, this is a normal opcode. */ - if ((oppos != -1) && (preoppos != -1) && - ((curopcodes->opcode[oppos].atomic - 1) == preoppos)) - continue; - } - + } ret = ich_spi_send_command(cmds->writecnt, cmds->readcnt, cmds->writearr, cmds->readarr); + /* Reset the type of all opcodes to non-atomic. */ + for (i = 0; i < 8; i++) + curopcodes->opcode[i].atomic = 0; } return ret; } -- Developer quote of the month: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

[commit] r894 - trunk
by repository service 11 Feb '10

11 Feb '10

Author: hailfinger Date: Thu Feb 11 12:28:37 2010 New Revision: 894 URL: http://flashrom.org/trac/coreboot/changeset/894 Log: This megapatch rewrites substantial parts of ICH SPI to actually do what the SPI layer wants instead of its own weird idea about commands (running unrequested commands, running modified commands). Besides that, there is a fair share of cleanups as well. - Add JEDEC_EWSR (Enable Write Status Register) to default commands. - Mark a no longer used opcode/preopcode table as unused. - Declare all commands as non-atomic/standalone by default. The ICH SPI driver has no business executing commands (preopcodes) automatically if they were not requested. - Automatically adjust preopcode/opcode pairings (like WREN+ERASE) based on what the SPI layer requested. The ICH SPI driver has no business executing altered opcode pairs as it sees fit. - Fix incomplete initialization in the case of a locked down chipset. Leaving the first 4 opcodes with uninitialized pairings had unpredictable results. - switch() exists for a reason. Nested if() checking on the same variable is an interesting style. - Actually check if the requested readcnt/writecnt for a command is supported by the hardware instead of delivering corrupt/incomplete commands and data. - If a command has unsupported readlen/writelen, complain loudly to the user. - Use find_opcode instead of open-coding the same stuff in a dozen variations. - Introduce infrastructure for updating the command set of unlocked chipsets on the fly. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/ichspi.c Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Feb 4 12:12:04 2010 (r893) +++ trunk/ichspi.c Thu Feb 11 12:28:37 2010 (r894) @@ -5,6 +5,7 @@ * Copyright (C) 2008 Claus Gindhart <claus.gindhart(a)kontron.com> * Copyright (C) 2008 Dominik Geyer <dominik.geyer(a)kontron.com> * Copyright (C) 2008 coresystems GmbH <info(a)coresystems.de> + * Copyright (C) 2009 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -116,7 +117,7 @@ uint8_t atomic; //Use preop: (0: none, 1: preop0, 2: preop1 } OPCODE; -/* Opcode definition: +/* Suggested opcode definition: * Preop 1: Write Enable * Preop 2: Write Status register enable * @@ -126,7 +127,7 @@ * OP 3: Read Status register * OP 4: Read ID * OP 5: Write Status register - * OP 6: chip private (read JDEC id) + * OP 6: chip private (read JEDEC id) * OP 7: Chip erase */ typedef struct _OPCODES { @@ -167,6 +168,7 @@ uint8_t opcode; }; +/* List of opcodes which need preopcodes and matching preopcodes. Unused. */ struct preop_opcode_pair pops[] = { {JEDEC_WREN, JEDEC_BYTE_PROGRAM}, {JEDEC_WREN, JEDEC_SE}, /* sector erase */ @@ -174,24 +176,30 @@ {JEDEC_WREN, JEDEC_BE_D8}, /* block erase */ {JEDEC_WREN, JEDEC_CE_60}, /* chip erase */ {JEDEC_WREN, JEDEC_CE_C7}, /* chip erase */ + /* FIXME: WRSR requires either EWSR or WREN depending on chip type. */ + {JEDEC_WREN, JEDEC_WRSR}, {JEDEC_EWSR, JEDEC_WRSR}, {0,} }; +/* Reasonable default configuration. Needs ad-hoc modifications if we + * encounter unlisted opcodes. Fun. + */ OPCODES O_ST_M25P = { { JEDEC_WREN, - 0}, + JEDEC_EWSR, + }, { - {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Write Byte + {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Write Byte {JEDEC_READ, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Data - {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Erase Sector + {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Erase Sector {JEDEC_RDSR, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read Device Status Reg {JEDEC_REMS, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Electronic Manufacturer Signature - {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Write Status Register + {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Write Status Register {JEDEC_RDID, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read JDEC ID - {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Bulk erase - } + {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Bulk erase + } }; OPCODES O_EXISTING = {}; @@ -220,9 +228,10 @@ return -1; } +/* Create a struct OPCODES based on what we find in the locked down chipset. */ static int generate_opcodes(OPCODES * op) { - int a, b, i; + int a; uint16_t preop, optype; uint32_t opmenu[2]; @@ -268,17 +277,10 @@ opmenu[1] >>= 8; } - /* atomic (link opcode with required pre-op) */ - for (a = 4; a < 8; a++) + /* No preopcodes used by default. */ + for (a = 0; a < 8; a++) op->opcode[a].atomic = 0; - for (i = 0; pops[i].opcode; i++) { - a = find_opcode(op, pops[i].opcode); - b = find_preop(op, pops[i].preop); - if ((a != -1) && (b != -1)) - op->opcode[a].atomic = (uint8_t) ++b; - } - return 0; } @@ -442,14 +444,15 @@ temp16 |= ((uint16_t) (opcode_index & 0x07)) << 4; /* Handle Atomic */ - if (op.atomic != 0) { - /* Select atomic command */ + switch (op.atomic) { + case 2: + /* Select second preop. */ + temp16 |= SPIC_SPOP; + /* And fall through. */ + case 1: + /* Atomic command (preop+op) */ temp16 |= SPIC_ACS; - /* Select prefix opcode */ - if ((op.atomic - 1) == 1) { - /*Select prefix opcode 2 */ - temp16 |= SPIC_SPOP; - } + break; } /* Start */ @@ -559,14 +562,15 @@ temp32 |= ((uint32_t) (opcode_index & 0x07)) << (8 + 4); /* Handle Atomic */ - if (op.atomic != 0) { - /* Select atomic command */ + switch (op.atomic) { + case 2: + /* Select second preop. */ + temp32 |= SSFC_SPOP; + /* And fall through. */ + case 1: + /* Atomic command (preop+op) */ temp32 |= SSFC_ACS; - /* Selct prefix opcode */ - if ((op.atomic - 1) == 1) { - /*Select prefix opcode 2 */ - temp32 |= SSFC_SPOP; - } + break; } /* Start */ @@ -609,16 +613,28 @@ { switch (spi_controller) { case SPI_CONTROLLER_VIA: - if (datalength > 16) + if (datalength > 16) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich7_run_opcode(op, offset, datalength, data, 16); case SPI_CONTROLLER_ICH7: - if (datalength > 64) + if (datalength > 64) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich7_run_opcode(op, offset, datalength, data, 64); case SPI_CONTROLLER_ICH9: - if (datalength > 64) + if (datalength > 64) { + fprintf(stderr, "%s: Internal command size error for " + "opcode 0x%02x, got datalength=%i, want <=16\n", + __func__, op.opcode, datalength); return SPI_INVALID_LENGTH; + } return ich9_run_opcode(op, offset, datalength, data); default: printf_debug("%s: unsupported chipset\n", __func__); @@ -697,7 +713,6 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - int a; int result; int opcode_index = -1; const unsigned char cmd = *writearr; @@ -707,21 +722,54 @@ int count; /* find cmd in opcodes-table */ - for (a = 0; a < 8; a++) { - if ((curopcodes->opcode[a]).opcode == cmd) { - opcode_index = a; - break; - } - } - - /* unknown / not programmed command */ + opcode_index = find_opcode(curopcodes, cmd); if (opcode_index == -1) { + /* FIXME: Reprogram opcodes if possible. Autodetect type of + * opcode by checking readcnt/writecnt. + */ printf_debug("Invalid OPCODE 0x%02x\n", cmd); return SPI_INVALID_OPCODE; } opcode = &(curopcodes->opcode[opcode_index]); + /* The following valid writecnt/readcnt combinations exist: + * writecnt = 4, readcnt >= 0 + * writecnt = 1, readcnt >= 0 + * writecnt >= 4, readcnt = 0 + * writecnt >= 1, readcnt = 0 + * writecnt >= 1 is guaranteed for all commands. + */ + if ((opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS) && + (writecnt != 4)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want =4\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if ((opcode->spi_type == SPI_OPCODE_TYPE_READ_NO_ADDRESS) && + (writecnt != 1)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want =1\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if ((opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) && + (writecnt < 4)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got writecnt=%i, want >=4\n", __func__, cmd, + writecnt); + return SPI_INVALID_LENGTH; + } + if (((opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) || + (opcode->spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)) && + (readcnt)) { + fprintf(stderr, "%s: Internal command size error for opcode " + "0x%02x, got readcnt=%i, want =0\n", __func__, cmd, + readcnt); + return SPI_INVALID_LENGTH; + } + /* if opcode-type requires an address */ if (opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS || opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { @@ -752,23 +800,69 @@ int ich_spi_send_multicommand(struct spi_command *cmds) { int ret = 0; + int i; int oppos, preoppos; for (; (cmds->writecnt || cmds->readcnt) && !ret; cmds++) { - /* Is the next command valid or a terminator? */ if ((cmds + 1)->writecnt || (cmds + 1)->readcnt) { + /* Next command is valid. */ preoppos = find_preop(curopcodes, cmds->writearr[0]); oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]); - /* Is the opcode of the current command listed in the - * ICH struct OPCODES as associated preopcode for the - * opcode of the next command? - */ - if ((oppos != -1) && (preoppos != -1) && - ((curopcodes->opcode[oppos].atomic - 1) == preoppos)) + if ((oppos == -1) && (preoppos != -1)) { + /* Current command is listed as preopcode in + * ICH struct OPCODES, but next command is not + * listed as opcode in that struct. + * Check for command sanity, then + * try to reprogram the ICH opcode list. + */ + if (find_preop(curopcodes, + (cmds + 1)->writearr[0]) != -1) { + fprintf(stderr, "%s: Two subsequent " + "preopcodes 0x%02x and 0x%02x, " + "ignoring the first.\n", + __func__, cmds->writearr[0], + (cmds + 1)->writearr[0]); + continue; + } + /* If the chipset is locked down, we'll fail + * during execution of the next command anyway. + * No need to bother with fixups. + */ + if (!ichspi_lock) { + printf_debug("%s: FIXME: Add on-the-fly" + " reprogramming of the " + "chipset opcode list.\n", + __func__); + /* FIXME: Reprogram opcode menu. + * Find a less-useful opcode, replace it + * with the wanted opcode, detect optype + * and reprogram the opcode menu. + * Update oppos so the next if-statement + * can do something useful. + */ + //curopcodes.opcode[lessusefulindex] = (cmds + 1)->writearr[0]); + //update_optypes(curopcodes); + //program_opcodes(curopcodes); + //oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]); + continue; + } + } + if ((oppos != -1) && (preoppos != -1)) { + /* Current command is listed as preopcode in + * ICH struct OPCODES and next command is listed + * as opcode in that struct. Match them up. + */ + curopcodes->opcode[oppos].atomic = preoppos + 1; continue; - } - + } + /* If none of the above if-statements about oppos or + * preoppos matched, this is a normal opcode. + */ + } ret = ich_spi_send_command(cmds->writecnt, cmds->readcnt, cmds->writearr, cmds->readarr); + /* Reset the type of all opcodes to non-atomic. */ + for (i = 0; i < 8; i++) + curopcodes->opcode[i].atomic = 0; } return ret; }

1 0

PCEngines WRAP 2E
by Vincenzo Caruso 10 Feb '10

10 Feb '10

Hello i have tested flashrom with PCEngines Wrap 2E. Is all ok, you can add to the functioning board now. Thanks. Vincenzo Caruso enzo(a)carusovincenzo.com

1 0

Donations, funding & t-shirts
by Carl-Daniel Hailfinger 10 Feb '10

10 Feb '10

Hi, I have been asked repeatedly whether it is possible to donate to flashrom, fund development or buy t-shirts. Given that quite some of us travel to conferences to talk about flashrom, and others buy hardware to support it, and a few other things which need money, this seems to be a good idea. Opinions? Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

3 2

Re: [flashrom] Bios flashing gone wrong (Ubuntu Karmic) - help please
by Michael Karcher 10 Feb '10

10 Feb '10

Am Mittwoch, den 10.02.2010, 11:28 +0100 schrieb michel.guesdon(a)free.fr: > When attempting to flash a new version of a Bios on a Compaq Evo D510 e-pc, > toreplace the old jk0101.rom, I got an error message > > What can I do now ? > > Thank you for your help. > Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. [chipset detected OK] [no special mainboard detected] > This chipset supports the following protocols: Non-SPI. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. [chip detected] > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... ERASE FAILED at 0x000100f7! Chances are *very* high that the chip is erase protected in a mainboard specific way, and nothing happened up to now. If you have a backup of your old BIOS created by flashrom -r, run "flashrom -v oldbios.bin". If it outputs "VERIFIED", you are safe to reboot (with your old BIOS). To have your mainboard supported by flashrom, please mail the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -deV' (all commands as root), the exact name of your board (including revision, if there are multiple revisions), and a link to the official BIOS download to flashrom(a)flashrom.org , as this information is needed to find out how to disable the flash chip write protection on your board. Probably superiotool is not installed on your system. Get it from http://www.coreboot.org/Superiotool#Installation . One of our developers will take a look at your report and contact you once a patch is ready. This might take a few weeks because we're all volunteers and the TODO list is rather big. Regards, Michael Karcher

1 0

Bios flashing gone wrong (Ubuntu Karmic) - help please
by michel.guesdon＠free.fr 10 Feb '10

10 Feb '10

When attempting to flash a new version of a Bios on a Compaq Evo D510 e-pc, toreplace the old jk0101.rom, I got an error message What can I do now ? Thank you for your help. anne@anne-desktop:~$ sudo flashrom -w jk0105.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. jk0105.rom: No such file or directory anne@anne-desktop:~$ sudo flashrom -w jk0105.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x000100f7! Expected=0xff, Read=0x28, failed byte count from 0x00010000-0x0001ffff: 0xfde7 ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! Michel Guesdon michel.guesdon(a)free.fr

1 0

My mobo flash is in an unknown state.
by Peter Silva 09 Feb '10

09 Feb '10

ASUS P4C800 Deluxe. Help! root@alu:/home/informavore# flashrom -r p4c_b4_update.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Reading flash... done. root@alu:/home/informavore# flashrom -v p4c_b4_update.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED. root@alu:/home/informavore# root@alu:/home/informavore# flashrom -w P4C81019.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: ERASE FAILED at 0x000047e8! Expected=0xff, Read=0x44, failed byte count from 0x00000000-0x0000ffff: 0xb74c ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ----------------------------

2 1

Flashage carte -mère Asus P4P800S-X
by stephen honeyman 09 Feb '10

09 Feb '10

Bonjour, Voici le résultat du flashage avec Flashrom: en français : *"Calibrage de la boucle de retard ... **OK. Pas de table coreboot trouvé. Trouver des chipset "Intel ICH5/ICH5R», permettant au flash à écrire ... OK. Trouver des puces "SST SST49LF003A / B" (384 Ko) à l'adresse physique 0xfffa0000. === Cette partie flash dispose d'un statut pour les opérations non vérifiées: PROBE ERASE LIRE ÉCRIRE S'il vous plaît e-mail un rapport au flashrom(a)coreboot.org si l'une des opérations ci-dessus fonctionner correctement pour vous avec cette partie flash. S'il vous plaît inclure l'ensemble des résultats à partir du programme, y compris chipset trouvé. Je vous remercie de votre aide! === Image flash semble être un BIOS héritage. Désactivation des contrôles. ERASE FAILED! " *en Anglais : *"Studio:/home/stephen/Mes Documents/CarteMère# flashrom -w p4p800s-x.rom Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. Found chip "SST SST49LF003A/B" (384 KB) at physical address 0xfffa0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Flash image seems to be a legacy BIOS. Disabling checks. ERASE FAILED!" * * *Merci de me donner le pas à suivre pour le réussir, d'avance merci Stephen Honeyman

2 1

ASUS P4C800 Deluxe info, as per IRC request
by Peter Silva 08 Feb '10

08 Feb '10

after checking out svn, it asked for flashrom-rV

1 0

ASUS P4C800 Deluxe info, as per IRC request
by Peter Silva 07 Feb '10

07 Feb '10

using flashrom included in ubuntu 9.10 (flashrom v0.9.1-r706)

1 1

Is the Gigabyte GA-MA780G-UD3H supported?
by santiago angel 07 Feb '10

07 Feb '10

Is the Gigabyte's GA-MA780G-UD3H supported? http://www.gigabyte.com.tw/Support/Motherboard/BIOS_Model.aspx?ProductID=30… flashrom returns this: # flashrom flashrom v0.9.1-r710 No coreboot table found. Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. running fedora 12 x86_64 flashrom-0.9.1-1.fc12.x86_64

2 2

ASUS-P5B BIOS flashrom success
by Patrice Levesque 07 Feb '10

07 Feb '10

Hi. I just flashed my ASUS-P5B BIOS using flashrom-v0.9.1-r710 and it smells like a success. First I read my previous BIOS (using flashrom -r) and compared to a downloaded stock BIOS; they were almost identical save a few vendor strings. Then flashed a new version (with flashrom -w), and reading it afterwards gave back the same data. Rebooted, and sure enough, the new BIOS version was printed. Attached is output from 'lspci -vvnn', 'dmidecode' and 'flashrom -V'. Please let me know if more data is needed to confirm the P5B compatibility with flashrom. Thanks for the good work, -- --====|====-- --------================|================-------- Patrice Levesque http://ptaff.ca/ fr.wayne(a)ptaff.ca --------================|================-------- --====|====-- --

1 0

[PATCH] Fix DMI match logic
by Michael Karcher 07 Feb '10

07 Feb '10

This bug slipped in on changing back match-specific to match-any Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- dmi.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/dmi.c b/dmi.c index d165e9f..f97aff7 100644 --- a/dmi.c +++ b/dmi.c @@ -162,7 +162,8 @@ int dmi_match(const char *pattern) return 0; for (i = 0;i < DMI_ID_INVALID; i++) - return dmi_compare(dmistrings[i], pattern); + if(dmi_compare(dmistrings[i], pattern)) + return 1; return 0; } -- 1.6.5

1 0

Winbond W39V040B on ASRock 939DUAL-VSTA
by Henne 06 Feb '10

06 Feb '10

Hi there, I want to give you some feedback for the W39V040B with flashrom-r893. Probe works fine: flashrom v0.9.1-runknown No coreboot table found. This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. Calibrating delay loop... OK. Found chip "Winbond W39V040B" (512 KB, LPC) at physical address 0xfff80000. Reading works fine too, but there are 7451 differences between the original file I flashed with ASRocks tool and the image I got with flashrom. Extracting both images with bios_extract results in identical files. Most of the differences are 0xff from the original and 0x00 of flashrom. Here are the dumps: Original: 0005fff0 53 43 30 38 30 30 2d 74 20 40 95 d7 0c 00 83 df |SC0800-t @......| 00060000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00070000 0c 79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.y..............| Flashrom: 0005fff0 53 43 30 38 30 30 2d 74 20 40 95 d7 0c 00 83 df |SC0800-t @......| 00060000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 0006c000 05 00 00 00 00 08 00 00 10 00 01 ff ff ff ff ff |................| 0006c010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 0006c800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 0006c840 00 80 01 00 40 00 40 08 10 00 01 ff ff ff ff ff |....@.@.........| 0006c850 00 13 8f c4 e7 bf 0d 00 ff ff ff ff ff ff ff ff |................| 0006c860 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 0006c880 08 00 02 00 9a 00 80 08 10 00 01 ff ff ff ff ff |................| 0006c890 f2 03 ac ce b6 00 00 00 00 00 00 00 00 00 00 00 |................| 0006c8a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0006c8b0 00 00 03 48 48 52 52 43 43 00 00 00 00 00 00 00 |...HHRRCC.......| 0006c8c0 00 00 00 02 00 01 03 04 05 06 07 00 00 00 00 01 |................| 0006c8d0 b9 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0006c8e0 00 00 00 00 00 00 00 00 00 01 02 03 04 05 06 07 |................| 0006c8f0 08 09 0a 0b 00 00 00 00 01 52 5c 00 00 00 00 00 |.........R\.....| 0006c900 00 00 01 03 01 00 00 00 00 01 ff d2 00 00 00 00 |................| 0006c910 00 00 00 01 02 03 00 00 00 00 00 00 00 00 00 00 |................| 0006c920 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 0006e540 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff |................| 0006e550 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00070000 0c 79 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.y..............| Erasing and Writing doesn't work. :( Greets, Henne

1 0

A8JM flashrom unable to erase
by Deathstalker 06 Feb '10

06 Feb '10

When I logged onto irc: <james_l> I have an odd case, and I was wondering if it'd be possible for someone to help: I have an a8jm laptop (Core (1) Duo) which burnt out a video card. Fortunately it is an MXM card (sorta), so it's replaceable. Unfortunately, I managed to order the wrong card for the next model. While it boots, and no display is shown at all. It's been suggested that the current bios would enable it to work, unfortunately flashrom recognizes the chip but is <james_l> unable to erase it before writing it. <james_l> This is the output: http://coreboot.pastebin.com/m660c2a4a <james_l> Oh, and I have successfully dumped the current bios. <macavity> james_l: most people here are currently at FOSDEM.. you may not get help emidiately <macavity> !summary james_l <flashrom_bot> james_l: please mail the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -deV' (all commands as root), the exact name of your board (including revision, if there are multiple revisions), and a link to the official BIOS download to flashrom(a)flashrom.org <macavity> including your problem that is :P <james_l> Alright I have since then done some more looking and modified a bios so that it will work (At least I'm fairly certain it will anyway). Even if that doesn't, in both cases I need to flash the ROM, which is failing to do so. I can read from it, which is how I can tell I currently have bios 209. Thank you in advance. Per the above: I'm unable to get a direct (or even to the model) from ASUS's download site, best I can do is provide a link to it, and what information you need. http://support.asus.com/download/download.aspx?SLanguage=en-us Product: Notebook Series: A8 Model A8JM The board revision, is I believe revision 2.0 (I'm not absolutely certain on that) james@james-rescue:~$ sudo flashrom -V Calibrating delay loop... 522M loops per second, 100 myus = 200 us. OK. No coreboot table found. Found chipset "Intel ICH7M", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0xa20c60: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled OK. Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF081, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF321A, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25DF641, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25F512B, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT25FS040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF041, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF081A, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26DF161A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT26F004, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB011D, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB021D, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB041D, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB081D, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB161D, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321C, 4224 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB321D, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT45DB642D, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L2005, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapping detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xbf, did 0x60 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0xbf, did 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected No operations were specified. ---- james@james-rescue:~$ lspci -nnvvvxxx 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa000000-fe0fffff Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 a1 27 07 05 10 00 03 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 b0 b0 00 00 20: 00 fa 00 fe f1 bd e1 dd 00 00 00 00 00 00 00 00 30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 0a 00 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:1153] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 86 80 d8 27 06 00 10 00 02 00 03 04 08 00 00 00 10: 04 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 53 11 30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 01 00 00 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 d0 27 04 05 10 00 02 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 02 00 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe100000-fe1fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 d4 27 07 05 10 00 02 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 c0 c0 00 00 20: 10 fe 10 fe f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 02 00 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 86 80 d6 27 04 05 10 00 02 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 05 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 04 02 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at ec00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 c8 27 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 ec 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 01 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 c9 27 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 e8 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 ca 27 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e8 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 06 03 00 00 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 cb 27 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 e4 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 86 80 cc 27 06 00 90 02 02 20 03 0c 00 00 00 00 10: 00 bc bf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 50 00 00 00 00 00 00 00 04 01 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00: 86 80 48 24 06 01 10 00 e2 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 06 06 20 f0 00 80 22 20: a0 fe a0 fe f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 b9 27 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: ata_piix 00: 86 80 df 27 05 00 88 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 f1 08 00 00 f9 08 00 00 20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce Go 7700 [10de:0397] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:1232] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at bc00 [size=128] Expansion ROM at fe0e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 97 03 07 00 10 00 a1 00 00 03 08 00 00 00 10: 00 00 00 fd 0c 00 00 c0 00 00 00 00 04 00 00 fc 20: 00 00 00 00 01 bc 00 00 00 00 00 00 43 10 32 12 30: 00 00 0e fe 60 00 00 00 00 00 00 00 0a 01 00 00 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:11f5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 2299 Region 0: I/O ports at c800 [size=256] Region 2: Memory at fe1ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fe1e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 68 81 07 04 10 00 01 00 00 02 08 00 00 00 10: 01 c8 00 00 00 00 00 00 04 f0 1f fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 02 01 00 00 43 10 f5 11 30: 00 00 1e fe 40 00 00 00 00 00 00 00 0b 01 00 00 06:00.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 00: 80 11 32 08 06 00 10 02 00 10 00 0c 00 40 80 00 10: 00 f8 af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 02 02 04 06:00.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 17 Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 00: 80 11 22 08 06 00 10 02 19 00 05 08 00 40 80 00 10: 00 f4 af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00 06:00.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ricoh-mmc Kernel modules: ricoh_mmc 00: 80 11 92 05 02 00 10 02 0a 00 80 08 00 00 80 00 10: 00 ec af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00 06:00.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:1287] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: Memory at feafec00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00: 80 11 52 08 02 00 10 02 05 00 80 08 00 00 80 00 10: 00 e8 af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 87 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00 06:00.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) !!! Unknown header type 7f 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff --- james@james-rescue:~$ sudo superiotool -deV superiotool r3695 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x7a, rev=0x01 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff No Super I/O found

1 0

Winbond W29C020C Flashrom Test
by amiga600dev＠yahoo.de 06 Feb '10

06 Feb '10

Hi there, here are the sucessful test results for: Winbond W29C020C @ Intel PIIX4/4E/4M flash part is marked UNTESTED so far Greetings Erik

1 0

'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -deV' outputs for XFX nFORCE 630I GEFORCE 7150 SOCKET 775 (Product Code: MG-63MI-7159)
by Maik Masling 06 Feb '10

06 Feb '10

1 0

[PATCH] Add Eon EN29LV800(B)(C){B,T} recognition
by TJ 06 Feb '10

06 Feb '10

Add initial recognition for the EON EN29LV800(B)(C){B,T}. The datasheet can be found at: http://www.essi.com.tw/upfile/p20097114268.pdf I'm not yet clear what CHIP_BUSTYPE it uses. The chip is used on Sony Vaio VGN-FE41 and similar models but will require some board enable measures. --- flashchips.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ flashchips.h | 2 + 2 files changed, 66 insertions(+), 0 deletions(-) diff --git a/flashchips.c b/flashchips.c index f66b95a..2953dd6 100644 --- a/flashchips.c +++ b/flashchips.c @@ -2165,6 +2165,70 @@ struct flashchip flashchips[] = { { .vendor = "EON", + .name = "EN29LV800(B)(C)B", + .bustype = CHIP_BUSTYPE_UNKNOWN, + .manufacture_id = EON_ID, + .model_id = EN_29LV800B, + .total_size = 1024, + .page_size = 1024, // TODO: check this + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* TODO: check Datasheet has no timing info specified */ + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = NULL, + .read = read_memmapped, + }, + + { + .vendor = "EON", + .name = "EN29LV800(B)(C)T", + .bustype = CHIP_BUSTYPE_UNKNOWN, + .manufacture_id = EON_ID, + .model_id = EN_29LV800T, + .total_size = 1024, + .page_size = 1024, // TODO: check this + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* TODO: check Datasheet has no timing info specified */ + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = NULL, + .read = read_memmapped, + }, + + { + .vendor = "EON", .name = "EN29F002(A)(N)B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, diff --git a/flashchips.h b/flashchips.h index e299852..8a72cb0 100644 --- a/flashchips.h +++ b/flashchips.h @@ -200,6 +200,8 @@ #define EN_29F040A 0x7F04 #define EN_29LV010 0x7F6E #define EN_29LV040A 0x7F4F /* EN_29LV040(A) */ +#define EN_29LV800B 0x7F5B /* EN29LV800/B/C */ +#define EN_29LV800T 0x7FDA #define EN_29F002T 0x7F92 /* Same as EN29F002A */ #define EN_29F002B 0x7F97 /* Same as EN29F002AN */ -- 1.6.3.3

1 0

flashroom success with msi 7321 v1.0 mb (k9MM-V)
by David Mears 05 Feb '10

05 Feb '10

seems to hose the MAC address on the onboard lan, though.

1 0

building 32-bit on 64-bit
by ron minnich 05 Feb '10

05 Feb '10

I'm sorry if there is an obvious answer but how is that done? thanks ron

2 1

[PATCH] Locking infrastructure and locking for W39V080FA and PMC 49LF040
by Sean Nelson 04 Feb '10

04 Feb '10

Locking infrastructure Add lock-status command option. Winbond W39V080FA has 64k lock blocks. PMC Pm49FL004 has 64k lock blocks. Tested, but write/erase fails. PMC Pm49FL002 has 32k lock blocks. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> --- Added dumps from an Compaq desktop with ASUS A8N-LA; just in case. Stepan if you could please test this and tell me if it works or not.

2 2

Call for photos: External programmers
by Carl-Daniel Hailfinger 04 Feb '10

04 Feb '10

Hi, I'd like to spice up my FOSDEM presentation with a few photos of supported (and WIP) external programmers. If you have any photos of SiliconImage SATA, Highpoint IDE, Nvidia graphics etc, please mail them to me or point me to a place where I can download them. Thanks! Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

test report
by Solomon Peachy 04 Feb '10

04 Feb '10

sudo ./flashrom flashrom v0.9.1-r893 No coreboot table found. sh: dmidecode: command not found Found ITE SuperI/O, id 8716 Found chipset "NVIDIA MCP51", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. I've sucecssfully flashed this part with the 0.9.1 release, on a PCCHIPS A11G motherboard. - Solomon -- Solomon Peachy solomon(a)linux-wlan.com AbsoluteValue Systems http://www.linux-wlan.com 721-D North Drive +1 (321) 259-0737 (office) Melbourne, FL 32934 +1 (321) 259-0286 (fax)

1 0

[commit] r893 - trunk
by repository service 04 Feb '10

04 Feb '10

Author: hailfinger Date: Thu Feb 4 12:12:04 2010 New Revision: 893 URL: http://flashrom.org/trac/coreboot/changeset/893 Log: Document the rules for DMI matching with PCI subsystem IDs. The rules may change in the future, but right now it is important that the comments match the code. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Feb 4 11:58:50 2010 (r892) +++ trunk/board_enable.c Thu Feb 4 12:12:04 2010 (r893) @@ -1160,9 +1160,10 @@ * subsystem/card IDs in a sane manner. * * Keep the second set NULLed if it should be ignored. Keep the subsystem IDs - * NULLed if they don't identify the board fully. But please take care to - * provide an as complete set of pci ids as possible; autodetection is the - * preferred behaviour and we would like to make sure that matches are unique. + * NULLed if they don't identify the board fully and if you can't use DMI. + * But please take care to provide an as complete set of pci ids as possible; + * autodetection is the preferred behaviour and we would like to make sure that + * matches are unique. * * If PCI IDs are not sufficient for board matching, the match can be further * constrained by a string that has to be present in the DMI database for @@ -1171,6 +1172,11 @@ * or the end (with a $ at the end). Both anchors may be specified at the * same time to match the full field. * + * When a board is matched through DMI, the first and second main PCI IDs + * and the first subsystem PCI ID have to match as well. If you specify the + * first subsystem ID as 0x0:0x0, the DMI matching code expects that the + * subsystem ID of that device is indeed zero. + * * The coreboot ids are used two fold. When running with a coreboot firmware, * the ids uniquely matches the coreboot board identification string. When a * legacy bios is installed and when autodetection is not possible, these ids

1 0

Re: [flashrom] [PATCH] (now for real!) Allow DMI supported board enables with subsystem ID zero.
by Carl-Daniel Hailfinger 04 Feb '10

04 Feb '10

On 04.02.2010 11:19, Michael Karcher wrote: > This is needed for the Intel SE440BX-2 as well as the Asus P5A. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

2 1

[commit] r892 - trunk
by repository service 04 Feb '10

04 Feb '10

Author: mkarcher Date: Thu Feb 4 11:58:50 2010 New Revision: 892 URL: http://flashrom.org/trac/coreboot/changeset/892 Log: Allow DMI supported board enables with subsystem ID zero. This is needed for the Intel SE440BX-2 as well as the Asus P5A. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Feb 4 09:29:18 2010 (r891) +++ trunk/board_enable.c Thu Feb 4 11:58:50 2010 (r892) @@ -1305,7 +1305,8 @@ struct board_pciid_enable *board = board_pciid_enables; for (; board->vendor_name; board++) { - if (!board->first_card_vendor || !board->first_card_device) + if ((!board->first_card_vendor || !board->first_card_device) && + !board->dmi_pattern) continue; if (!pci_card_find(board->first_vendor, board->first_device,

1 0

[PATCH] (now for real!) Allow DMI supported board enables with subsystem ID zero.
by Michael Karcher 04 Feb '10

04 Feb '10

This is needed for the Intel SE440BX-2 as well as the Asus P5A. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Now *REALLY* with the right patch. I supposed I knew how to operate git :( --- board_enable.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 40db653..c73c8af 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1312,7 +1312,8 @@ static struct board_pciid_enable *board_match_pci_card_ids(void) struct board_pciid_enable *board = board_pciid_enables; for (; board->vendor_name; board++) { - if (!board->first_card_vendor || !board->first_card_device) + if ((!board->first_card_vendor || !board->first_card_device) && + !board->dmi_pattern) continue; if (!pci_card_find(board->first_vendor, board->first_device, -- 1.6.5

1 0

Re: [flashrom] [PATCH] (fixed) Allow DMI supported board enables with subsystem ID zero.
by Carl-Daniel Hailfinger 04 Feb '10

04 Feb '10

On 04.02.2010 10:59, Michael Karcher wrote: > This is needed for the Intel SE440BX-2 as well as the Asus P5A. > > Thanks to Carl-Daniel Hailfinger for pointing out wrong logic in > the patch. > > Zach: please retry with this one instead of the previous version of > this patch. You can unpatch the previous version by > patch -R < oldpatch.diff > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > AFAICS you reposted the old patch. Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

[PATCH] Allow DMI supported board enables with subsystem ID zero.
by Michael Karcher 04 Feb '10

04 Feb '10

This is needed for the Intel SE440BX-2 as well as the Asus P5A. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> This time with the right patch included. --- board_enable.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 40db653..66afab4 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1312,7 +1312,8 @@ static struct board_pciid_enable *board_match_pci_card_ids(void) struct board_pciid_enable *board = board_pciid_enables; for (; board->vendor_name; board++) { - if (!board->first_card_vendor || !board->first_card_device) + if (!board->first_card_vendor || + (!board->first_card_device && !board->dmi_pattern)) continue; if (!pci_card_find(board->first_vendor, board->first_device, -- 1.6.5

1 0

Re: [flashrom] [PATCH] please disregard last mail!
by Michael Karcher 04 Feb '10

04 Feb '10

Am Donnerstag, den 04.02.2010, 10:59 +0100 schrieb Michael Karcher: > Zach: please retry with this one instead of the previous version of > this patch. You can unpatch the previous version by > patch -R < oldpatch.diff That patch was identical to the first one. I mixed of things :( Regards, Michael Karcher

1 0

Re: [flashrom] [PATCH] Allow DMI supported board enables with subsystem ID zero.
by Carl-Daniel Hailfinger 04 Feb '10

04 Feb '10

On 29.01.2010 01:40, Michael Karcher wrote: > --- a/board_enable.c > +++ b/board_enable.c > @@ -1312,7 +1312,8 @@ static struct board_pciid_enable *board_match_pci_card_ids(void) > struct board_pciid_enable *board = board_pciid_enables; > > for (; board->vendor_name; board++) { > - if (!board->first_card_vendor || !board->first_card_device) > + if (!board->first_card_vendor || > + (!board->first_card_device && !board->dmi_pattern)) > continue; > > if (!pci_card_find(board->first_vendor, board->first_device, > This code still requires a nonzero subsystem vendor even if a DMI pattern is present. If that is intentional (I thought DMI would eliminate subsystem vendor+device requirement), the patch is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

3 5

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom