- flashrom - mail.coreboot.org

[UNSUPPORTED] Elitegroup A740GM-M (1.0)
by den_m＠hotmail.ru 12 Jun '10

12 Jun '10

Hi all, there are the results of running flashrom on motherboard "Elitegroup A740GM-M (1.0)". some MB specifications http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=864&… READ test results: ./flashrom --read a740.backup.rom flashrom v0.9.1-r993 on Linux 2.6.28-gentoo-r1.ddb.den_m (i686), built with libpci 3.0.0, GCC 4.3.2 No coreboot table found. Found ITE Super I/O, id 8726 Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "Generic unknown SPI chip (RDID)" (0 KB, SPI) at physical address 0x0. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... FAILED! ERROR: flashrom has no read function for this flash chip. ./flashrom -V flashrom v0.9.1-r993 on Linux 2.6.28-gentoo-r1.ddb.den_m (i686), built with libpci 3.0.0, GCC 4.3.2 No coreboot table found. DMI string system-manufacturer: "ECS" DMI string system-product-name: "A740GM-M" DMI string system-version: "1.0 " DMI string baseboard-manufacturer: "ECS" DMI string baseboard-product-name: "A740GM-M" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8726 Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=0, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. SuperI/O ID 8726 is not on the controller list. Calibrating delay loop... 1396M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10004 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x8c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x8c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xf5, id2 0xc9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x54, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0x8c, id2 0x2014 Found chip "Generic unknown SPI chip (RDID)" (0 KB, SPI) at physical address 0x0. Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rems: id1 0x8c, id2 0x13 Not unmapping zero size at (nil) === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. Any advices or links how to implement operations for that chip? -- Den_M

2 1

[commit] r1040 - trunk
by repository service 12 Jun '10

12 Jun '10

Author: mkarcher Date: Sat Jun 12 19:27:44 2010 New Revision: 1040 URL: http://flashrom.org/trac/coreboot/changeset/1040 Log: Board enable for EPIA EK (untested) Reporter/owner of that board: oscar <oshikore(a)gmail.com> http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Jun 8 00:37:54 2010 (r1039) +++ trunk/board_enable.c Sat Jun 12 19:27:44 2010 (r1040) @@ -389,7 +389,7 @@ } /** - * Suited for VIA EPIA N & NL. + * Suited for VIA EPIA EK & N & NL. */ static int via_vt823x_gpio9_raise(void) { @@ -1490,6 +1490,7 @@ {0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x0596, 0x1106, 0, NULL, NULL, NULL, "Tekram", "P6Pro-A5", 256, OK, NULL}, {0x1106, 0x3123, 0x1106, 0x3123, 0x1106, 0x3059, 0x1106, 0x4161, NULL, NULL, NULL, "Termtek", "TK-3370 (Rev:2.5B)", 0, OK, w836xx_memw_enable_4e}, {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", 0, OK, w836xx_memw_enable_2e}, + {0x1106, 0x0259, 0x1106, 0xAA07, 0x1106, 0x3227, 0x1106, 0xAA07, NULL, NULL, NULL, "VIA", "EPIA EK", 0, NT, via_vt823x_gpio9_raise}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, "VIA", "EPIA M/MII/...", 0, OK, via_vt823x_gpio15_raise}, {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, "VIA", "EPIA-N/NL", 0, OK, via_vt823x_gpio9_raise}, #endif Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Jun 8 00:37:54 2010 (r1039) +++ trunk/print.c Sat Jun 12 19:27:44 2010 (r1040) @@ -440,6 +440,7 @@ B("VIA", "EPIA M/MII/...", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */ B("VIA", "EPIA SP", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), B("VIA", "EPIA-CN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "EPIA EK", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL), B("VIA", "EPIA-EX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), B("VIA", "EPIA-LN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), B("VIA", "EPIA-M700", 1, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL),

1 0

Data from Gigabyte Mainboard
by Linuxuser＠gmx.de 12 Jun '10

12 Jun '10

Hi, that's the output from flashrom -V about my motherboard: [dietmar@powerarchy ~]$ sudo flashrom -V flashrom v0.9.2-r1001 on Linux 2.6.33-ARCH (x86_64), built with libpci 3.1.7, GCC 4.5.0 20100520 (prerelease) flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "M720-US3" DMI string system-version: " " DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "M720-US3" DMI string baseboard-version: "x.x" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8720 Found chipset "NVIDIA MCP78S", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:0752 at 00:01:1 SPI BAR is at 0x00000000, after clearing low bits BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. LPC on this chipset is not supported yet. OK. This chipset supports the following protocols: LPC. Serial flash segment 0xfffe0000-0xffffffff enabled Serial flash segment 0x000e0000-0x000fffff enabled Serial flash segment 0xffee0000-0xffefffff disabled Serial flash segment 0xfff80000-0xfffeffff enabled LPC write to serial flash enabled Serial flash pin 87 Serial flash port 0x0820 Calibrating delay loop... 1499M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10009 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A25L40PU, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Chip status register is 1c Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is set Chip status register: Bit 3 / Block Protect 1 (BP1) is set Chip status register: Bit 2 / Block Protect 0 (BP0) is set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0xef, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x24, id2 0xef, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x24, id2 0xef, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x24, id2 0xef, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x8e === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! I hope, that this can help you and sorry for my bad english. Best greetings from germany Dietmar Gaffron

1 0

Flashrom results for Asus M3N78-VM Motherboard
by Douglas Roberts 10 Jun '10

10 Jun '10

-- Doug Roberts droberts(a)rti.org doug(a)parrot-farm.net 505-455-7333 - Office 505-670-8195 - Cell

1 0

nvidia mcp79 (MSI Wind-Top AE2220-25S
by Alex Neblett 10 Jun '10

10 Jun '10

1 0

flashrom on ASUS P4BP-MX 2.00
by Anton Yuzhaninov 09 Jun '10

09 Jun '10

1. Read seems to work: $ flashrom -r ttt.bin flashrom v0.9.2-r1001 on FreeBSD 9.0-CURRENT (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org No coreboot table found. Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF003A/B" (384 KB, FWH) at physical address 0xfffa0000. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. $ ls -l ttt.bin -rw-r--r-- 1 root citrin 393216 Jun 9 20:48 ttt.bin full read log with -V: http://citrin.ru/tmp/flashrom_ASUS_P4BP-MX_read.log 2. Write don't work: === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x24, failed byte count from 0x00000000-0x00000fff: 0xfef ERASE FAILED! ERASE FAILED at 0x00000000! Expected=0xff, Read=0x24, failed byte count from 0x00000000-0x0000ffff: 0xfeec ERASE FAILED! FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! full write log: http://citrin.ru/tmp/flashrom_ASUS_P4BP-MX_write.log 3. after failed write flash seems to be not corrupted: md5 for file from flashrom -r is same as before. -- WBR, Anton Yuzhaninov

1 0

MCP SPI test (MCP61)
by Andrew Cleveland 09 Jun '10

09 Jun '10

Manufacturer: ECS (Elitegroup) Model: Geforce6100SM-M (V1.0) BIOS update file: http://download.ecs.com.tw/dlfileecs/bios/mb/p4/GeForce6100SM-M/61SM523.zip Script started on Tue 08 Jun 2010 04:30:18 PM PDT + ./flashrom -V flashrom v0.9.2-r1039 on Linux 2.6.32-22-generic (x86_64), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 777M loops per second, 10 myus = 10 us, 100 myus = 97 us, 1000 myus = 1022 us, 10000 myus = 10040 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "NF-MCP61" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8726 Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e0, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. SuperI/O ID 8726 is not on the controller list. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. + lspci -nnvvvxxx 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 200MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 ea 03 06 00 b0 00 a1 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 19 10 02 26 08 dc 20 02 20 00 11 11 d0 00 00 00 50: 23 00 7f 00 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 00 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00 90: 78 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8 e0: 00 00 e0 fe 00 00 00 00 07 00 00 00 20 10 00 00 f0: f0 ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 e0 03 0f 00 a0 00 a2 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 19 10 02 26 00 00 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 05 0f 00 3c 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 70: 10 00 ff ff c5 80 00 00 00 00 04 19 40 00 00 30 80: 09 20 00 10 0d 18 00 00 ff 00 00 01 ff 00 00 00 90: ff 7f 00 00 00 00 00 00 21 65 08 74 b9 0c 00 d0 a0: 01 00 10 c1 00 00 00 00 00 00 00 00 00 00 00 00 b0: 90 02 ef 02 00 08 5f 08 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at fc00 [size=64] Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at f400 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00: de 10 eb 03 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 1c 00 00 01 f4 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00 40: 19 10 02 26 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00 70: 00 00 00 00 00 00 c8 fe 00 00 fe fe 01 00 00 00 80: 00 10 fe fe 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 01 01 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00 e0: 88 10 04 00 00 40 00 07 80 32 04 20 41 44 44 11 f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00 00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 f5 03 00 04 a0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 10 02 80 10 10 00 10 10 50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00 60: 0b 00 00 00 c0 1c 52 06 21 00 10 0a 00 00 63 00 70: 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 40 00 00 00 00 00 a0 18 00 00 90: 00 00 00 00 00 00 00 12 20 81 04 00 00 00 00 00 a0: 00 14 00 06 00 00 00 00 00 00 00 00 01 00 00 00 b0: 00 00 00 00 42 80 30 04 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.3 Co-processor [0b40]: nVidia Corporation MCP61 SMU [10de:03f4] (rev a2) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 0 Region 0: Memory at fec80000 (32-bit, non-prefetchable) [size=512K] 00: de 10 f4 03 06 00 a0 00 a2 00 40 0b 00 00 80 00 10: 00 00 c8 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 03 01 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 c8 fe 00 00 00 00 00 00 00 00 80: 05 9c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 f1 03 07 00 b0 00 a3 10 03 0c 00 00 80 00 10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 19 10 02 26 01 00 02 fe 00 00 00 00 00 00 00 00 50: 0c 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 f2 03 06 00 b0 00 a3 20 03 0c 00 00 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01 40: 19 10 02 26 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 c3 13 0f 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 34 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00 b0: 33 00 11 22 44 00 00 00 ff 00 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ec000000-efffffff Prefetchable memory behind bridge: fdf00000-fdffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00: de 10 f3 03 07 00 b0 00 a1 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 22 20: 00 ec f0 ef f0 fd f0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02 40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00 50: 00 00 00 00 00 00 00 00 f2 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 0a 00 00 3c 00 40 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2) Subsystem: Elitegroup Computer Systems Device [1019:a88d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 27 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+ Address: 00000000fee0100c Data: 4189 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: de 10 f0 03 06 04 b0 00 a2 00 03 04 00 00 80 00 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 8d a8 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05 40: 19 10 8d a8 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 81 01 0c 10 e0 fe 00 00 00 00 89 41 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00 00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd Kernel modules: pata_amd 00: de 10 ec 03 05 00 b0 00 a2 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f0 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 19 10 02 26 01 00 02 00 00 00 00 00 00 00 00 00 50: 02 f0 01 00 00 00 00 00 99 99 20 20 0a 00 a8 20 60: 00 00 c0 c6 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 40 42 2f 00 00 02 14 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+ Address: 00000000fee0100c Data: 4199 Masking: 000000fe Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: forcedeth Kernel modules: forcedeth 00: de 10 ef 03 07 04 b0 00 a2 00 80 06 00 00 00 00 10: 00 d0 02 fe 01 ec 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14 40: 19 10 02 26 01 50 02 fe 00 01 00 00 08 00 00 20 50: 05 6c 87 01 0c 10 e0 fe 00 00 00 00 99 41 00 00 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 04 00 00 00 42 01 00 00 00 00 00 00 00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Elitegroup Computer Systems Device [1019:2602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d800 [size=16] Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv Kernel modules: sata_nv 00: de 10 f6 03 07 00 b0 00 a2 85 01 01 00 00 80 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 d8 00 00 00 c0 02 fe 00 00 00 00 19 10 02 26 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 19 10 02 26 01 b0 02 00 00 00 00 00 00 00 00 00 50: 0f 68 08 00 00 00 00 00 a8 a8 a8 20 6a 00 99 20 60: 00 00 00 c7 61 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 80 80: 00 00 00 40 00 20 d8 18 00 00 08 a0 de ff fb ff 90: 00 00 e4 3f 00 00 00 00 06 00 06 10 f6 03 01 01 a0: 08 00 00 0e 80 00 00 00 00 00 00 00 33 31 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 08 00 00 77 00 08 03 00 08 00 00 44 00 08 08 00 e0: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 4149 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 1, PowerLimit 75.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: de 10 e8 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 b1 b1 00 00 20: 00 f8 f0 fb 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 1c 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 49 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00 90: 40 00 81 30 80 25 08 00 c0 01 48 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 2, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: de 10 e9 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 a1 a1 00 00 20: e0 fd e0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 51 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 30 28 00 00 11 3c 11 01 90: 00 00 11 10 00 05 10 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 3, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Kernel driver in use: pcieport Kernel modules: shpchp 00: de 10 e9 03 07 04 10 00 a2 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 91 91 00 00 20: c0 fd c0 fd b1 fd b1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 59 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 30 28 00 00 11 3c 11 02 90: 00 00 11 10 00 05 18 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 2e 0f 2c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 00 75 80 02 00 00 00 90: 69 01 61 01 00 00 04 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 90: 03 00 40 00 00 ff ef 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 03 00 f4 00 00 02 fe 00 b0: 03 00 f0 00 80 4f f0 00 00 00 00 00 00 00 00 00 c0: 13 90 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: amd64_edac_mod 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3f 38 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 02 00 00 00 00 00 00 00 24 fa 7d 5d 20 13 12 00 90: 10 0c 01 00 6b 00 10 77 39 00 00 80 00 00 00 00 a0: ef 02 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: 73 b8 cb 84 6d 00 00 00 6c c8 31 1c d9 b8 e0 68 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 79 c7 ac 3d 72 63 10 26 fa 61 97 f4 d3 73 0d c0 e0: f9 b2 f6 a4 3b 76 4c 17 7d b5 78 74 e9 90 6c c0 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 02 00 00 00 00 00 00 00 00 50: f8 1b 00 c5 a5 00 00 00 00 00 00 00 00 e9 8d 15 60: a8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 70 50 00 2a 00 08 18 21 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 d1 6e 00 00 b0 16 bc 54 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 60 08 25 26 26 00 e0: 00 00 00 00 36 99 50 00 19 07 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 f1 0f 07 00 01:06.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a] Subsystem: Hauppauge computer works Inc. Device [0070:7444] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 50000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx18 Kernel modules: cx18 00: f1 14 7a 5b 06 00 90 02 00 00 00 04 10 40 00 00 10: 00 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 44 74 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 c8 40: 30 10 10 01 03 4c 00 00 00 00 00 00 01 00 22 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) Subsystem: Device [196e:0643] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at bc00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nvidiafb, nouveau 00: de 10 40 06 07 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 f8 20: 00 00 00 00 01 bc 00 00 00 00 00 00 6e 19 43 06 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00 40: 6e 19 43 06 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 03 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 b4 01 00 e0 84 00 00 80: 10 29 00 00 01 3d 00 00 48 00 81 10 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + superiotool -deV superiotool r3844 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Found ITE IT8726F (id=0x8726, rev=0x1) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 26 01 11 00 00 def 87 26 01 00 MM 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 01 03 f0 06 02 00 80 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 01 03 f8 04 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 00 00 00 00 00 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 01 03 78 07 78 07 03 0b def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 00 00 0a 00 a0 00 ff def 00 02 90 02 30 09 00 00 00 00 00 MM MM LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 68 def 01 00 60 00 64 01 02 08 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd val 41 d4 01 00 08 01 40 00 00 08 00 00 00 00 00 00 38 00 40 00 00 00 00 00 00 90 01 00 00 00 00 c4 00 00 00 01 c0 00 00 08 00 00 00 00 00 10 00 00 00 00 18 0e 00 2b 01 00 00 3f 00 def 01 00 00 40 00 00 1f 00 00 00 00 00 00 00 00 MM 38 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 MM 00 LDN 0x08 (MIDI port) idx 30 60 61 70 f0 val 00 03 00 0a 00 def 00 03 00 0a 00 LDN 0x09 (Game port) idx 30 60 61 val 00 02 01 def 00 02 01 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 00 Environment controller (0x0295) Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Script done on Tue 08 Jun 2010 04:30:19 PM PDT

1 0

[commit] r1039 - trunk
by repository service 08 Jun '10

08 Jun '10

Author: hailfinger Date: Tue Jun 8 00:37:54 2010 New Revision: 1039 URL: http://flashrom.org/trac/coreboot/changeset/1039 Log: National Semiconductor DP83815/DP83816 and DP83820 NIC programmer support. Some instability remains, but that may be due to hardware problems in the specific card (Netgear FA311) used for testing. Signed-off-by: Andrew Morgan <ziltro(a)ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Added: trunk/nicnatsemi.c Modified: trunk/Makefile trunk/flash.h trunk/flashrom.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Mon Jun 7 21:41:25 2010 (r1038) +++ trunk/Makefile Tue Jun 8 00:37:54 2010 (r1039) @@ -113,6 +113,9 @@ # Always enable Realtek NICs for now. CONFIG_NICREALTEK ?= yes +# Disable National Semiconductor NICs until support is complete and tested. +CONFIG_NICNATSEMI ?= no + # Always enable Bus Pirate SPI for now. CONFIG_BUSPIRATE_SPI ?= yes @@ -192,6 +195,12 @@ NEED_PCI := yes endif +ifeq ($(CONFIG_NICNATSEMI), yes) +FEATURE_CFLAGS += -D'CONFIG_NICNATSEMI=1' +PROGRAMMER_OBJS += nicnatsemi.o +NEED_PCI := yes +endif + ifeq ($(CONFIG_BUSPIRATE_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1' PROGRAMMER_OBJS += buspirate_spi.o Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon Jun 7 21:41:25 2010 (r1038) +++ trunk/flash.h Tue Jun 8 00:37:54 2010 (r1039) @@ -49,6 +49,9 @@ PROGRAMMER_NICREALTEK, PROGRAMMER_NICREALTEK2, #endif +#if CONFIG_NICNATSEMI == 1 + PROGRAMMER_NICNATSEMI, +#endif #if CONFIG_GFXNVIDIA == 1 PROGRAMMER_GFXNVIDIA, #endif @@ -339,7 +342,7 @@ /* print.c */ char *flashbuses_to_text(enum chipbustype bustype); void print_supported(void); -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1 +#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1 void print_supported_pcidevs(struct pcidev_status *devs); #endif void print_supported_wiki(void); @@ -491,6 +494,14 @@ extern struct pcidev_status nics_realteksmc1211[]; #endif +/* nicnatsemi.c */ +#if CONFIG_NICNATSEMI == 1 +int nicnatsemi_init(void); +int nicnatsemi_shutdown(void); +void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr); +uint8_t nicnatsemi_chip_readb(const chipaddr addr); +extern struct pcidev_status nics_natsemi[]; +#endif /* satasii.c */ #if CONFIG_SATASII == 1 Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Mon Jun 7 21:41:25 2010 (r1038) +++ trunk/flashrom.c Tue Jun 8 00:37:54 2010 (r1039) @@ -48,7 +48,7 @@ * if more than one of them is selected. If only one is selected, it is clear * that the user wants that one to become the default. */ -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG > 1 +#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG > 1 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one. #endif enum programmer programmer = @@ -59,6 +59,9 @@ PROGRAMMER_NICREALTEK PROGRAMMER_NICREALTEK2 #endif +#if CONFIG_NICNATSEMI == 1 + PROGRAMMER_NICNATSEMI +#endif #if CONFIG_GFXNVIDIA == 1 PROGRAMMER_GFXNVIDIA #endif @@ -199,6 +202,24 @@ }, #endif +#if CONFIG_NICNATSEMI == 1 + { + .name = "nicnatsemi", + .init = nicnatsemi_init, + .shutdown = nicnatsemi_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = nicnatsemi_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicnatsemi_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif #if CONFIG_GFXNVIDIA == 1 { Added: trunk/nicnatsemi.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/nicnatsemi.c Tue Jun 8 00:37:54 2010 (r1039) @@ -0,0 +1,87 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010 Andrew Morgan <ziltro(a)ziltro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdlib.h> +#include "flash.h" + +#define PCI_VENDOR_ID_NATSEMI 0x100b + +#define BOOT_ROM_ADDR 0x50 +#define BOOT_ROM_DATA 0x54 + +struct pcidev_status nics_natsemi[] = { + {0x100b, 0x0020, NT, "National Semiconductor", "DP83815/DP83816"}, + {0x100b, 0x0022, NT, "National Semiconductor", "DP83820"}, + {}, +}; + +int nicnatsemi_init(void) +{ + get_io_perms(); + + io_base_addr = pcidev_init(PCI_VENDOR_ID_NATSEMI, PCI_BASE_ADDRESS_0, + nics_natsemi, programmer_param); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + return 0; +} + +int nicnatsemi_shutdown(void) +{ + free(programmer_param); + pci_cleanup(pacc); + release_io_perms(); + return 0; +} + +void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr) +{ + OUTL((uint32_t)addr & 0x0000FFFF, io_base_addr + BOOT_ROM_ADDR); + /* + * The datasheet requires 32 bit accesses to this register, but it seems + * that requirement might only apply if the register is memory mapped. + * Bit 8-31 of this register are apparently don't care, and if this + * register is I/O port mapped 8 bit accesses to the lowest byte of the + * register seem to work fine. Due to that, we ignore the advice in the + * data sheet. + */ + OUTB(val, io_base_addr + BOOT_ROM_DATA); +} + +uint8_t nicnatsemi_chip_readb(const chipaddr addr) +{ + OUTL(((uint32_t)addr & 0x0000FFFF), io_base_addr + BOOT_ROM_ADDR); + /* + * The datasheet requires 32 bit accesses to this register, but it seems + * that requirement might only apply if the register is memory mapped. + * Bit 8-31 of this register are apparently don't care, and if this + * register is I/O port mapped 8 bit accesses to the lowest byte of the + * register seem to work fine. Due to that, we ignore the advice in the + * data sheet. + */ + return INB(io_base_addr + BOOT_ROM_DATA); +} + +#else +#error PCI port I/O access is not supported on this architecture yet. +#endif

1 0

[PATCH] Various manpage fixes and improvements
by Uwe Hermann 07 Jun '10

07 Jun '10

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1038 - trunk
by repository service 07 Jun '10

07 Jun '10

Author: uwe Date: Mon Jun 7 21:41:25 2010 New Revision: 1038 URL: http://flashrom.org/trac/coreboot/changeset/1038 Log: Various manpage fixes and improvements. - Use [<vendor>:]<board>], not [<vendor>:]<part>], which is more clear. - Mention TSOP48 chips in the description. - Highlight various additional parts in the manpage which were missing so far (i.e., make them bold), including cmdline switches and others. - Mention that you can use -VV. - Fix name of the now-renamed 'Supported mainboards' section in -L output. - Mention that ft2232_spi and buspirate_spi only support SPI chips. - Readability and cosmetic improvements, add missing escapes, fix typos. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.8 Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Mon Jun 7 21:06:26 2010 (r1037) +++ trunk/flashrom.8 Mon Jun 7 21:41:25 2010 (r1038) @@ -1,11 +1,11 @@ -.TH FLASHROM 8 "Apr 29, 2010" +.TH FLASHROM 8 "Jun 06, 2010" .SH NAME flashrom \- detect, read, write, verify and erase flash chips .SH SYNOPSIS .B flashrom \fR[\fB\-n\fR] [\fB\-V\fR] [\fB\-f\fR] [\fB\-h\fR|\fB\-R\fR|\ \fB\-L\fR|\fB\-z\fR|\fB\-E\fR|\fB\-r\fR <file>|\fB\-w\fR <file>|\ \fB\-v\fR <file>] - [\fB\-c\fR <chipname>] [\fB\-m\fR [<vendor>:]<part>] \ + [\fB\-c\fR <chipname>] [\fB\-m\fR [<vendor>:]<board>] \ [\fB\-l\fR <file>] [\fB\-i\fR <image>] [\fB\-p\fR <programmername>[:<parameters>]] .SH DESCRIPTION @@ -16,20 +16,24 @@ (NICs), SATA controller cards, and other external devices which can program flash chips. .PP -It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and -TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash, +It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40, +and TSOP48 chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. .SH OPTIONS +.B IMPORTANT: Please note that the command line interface for flashrom will change before flashrom 1.0. Do not use flashrom in scripts or other automated tools without checking that your flashrom version won't interpret options in a different way. .PP -You can specify one of \-h, \-R, \-L, \-z, \-E, \-r, \-w, \-v or no operation. +You can specify one of +.BR \-h ", " \-R ", " \-L ", " \-z ", " \-E ", " \-r ", " \-w ", " \-v +or no operation. If no operation is specified, flashrom will only probe for flash chips. It is recommended that if you try flashrom the first time on a system, you run it in probe only mode and check the output. Also you are advised to make a -backup of your current ROM contents with \-r before you try to write a new -image. +backup of your current ROM contents with +.B \-r +before you try to write a new image. .TP .B "\-r, \-\-read <file>" Read flash ROM contents and save them into the given @@ -38,7 +42,9 @@ .B "\-w, \-\-write <file>" Write .B <file> -into flash ROM. +into flash ROM. This will first automatically +.B erase +the chip, then write to it. .TP .B "\-n, \-\-noverify" Skip the automatic verification of flash ROM contents after writing. Using this @@ -48,7 +54,7 @@ feel that the time for verification takes too long. .sp Typical usage is: -.B "flashrom -n -w file" +.B "flashrom \-n \-w <file>" .sp This option is only useful in combination with .BR \-\-write . @@ -61,34 +67,38 @@ Erase the flash ROM chip. .TP .B "\-V, \-\-verbose" -More verbose output. +More verbose output. This option can be supplied multiple times +(max. 2 times, i.e. +.BR \-VV ) +for even more debug output. .TP .B "\-c, \-\-chip" <chipname> -Probe only for specified flash ROM chip. This option takes the chip name as +Probe only for the specified flash ROM chip. This option takes the chip name as printed by .B "flashrom \-L" -without the vendor name. Please note that the chip name is case sensitive. +without the vendor name as parameter. Please note that the chip name is +case sensitive. .TP -.B "\-m, \-\-mainboard" [<vendor>:]<part> +.B "\-m, \-\-mainboard" [<vendor>:]<board> Override mainboard settings. .sp flashrom reads the coreboot table to determine the current mainboard. If no coreboot table could be read or if you want to override these values, you can specify \-m, e.g.: .sp -.B " flashrom --mainboard AGAMI:ARUMA -w agami_aruma.rom" +.B " flashrom \-\-mainboard AGAMI:ARUMA \-w agami_aruma.rom" .sp -See the 'Supported mainboards' section in the output of 'flashrom \-L' for -a list of boards which require the specification of the board name, if no -coreboot table is found. +See the 'Known boards' or 'Known laptops' section in the output +of 'flashrom \-L' for a list of boards which require the specification of +the board name, if no coreboot table is found. .TP .B "\-f, \-\-force" Force one or more of the following actions: .sp * Force chip read and pretend the chip is there. .sp -* Force chip access even if the chip is bigger than max decode size for\ - the flash bus. +* Force chip access even if the chip is bigger than the maximum supported\ +size for the flash bus. .sp * Force erase even if erase is known bad. .sp @@ -111,13 +121,13 @@ All addresses are offsets within the file, not absolute addresses! If you only want to update the normal image in a ROM you can say: .sp -.B " flashrom --layout rom.layout --image normal -w agami_aruma.rom" +.B " flashrom \-\-layout rom.layout \-\-image normal \-w agami_aruma.rom" .sp To update normal and fallback but leave the VGA BIOS alone, say: .sp -.B " flashrom -l rom.layout -i normal \" +.B " flashrom \-l rom.layout \-i normal \" .br -.B " -i fallback -w agami_aruma.rom" +.B " \-i fallback \-w agami_aruma.rom" .sp Currently overlapping sections are not supported. .TP @@ -132,7 +142,10 @@ .sp There are many unlisted boards which will work out of the box, without special support in flashrom. Please let us know if you can verify that -other boards work or do not work out of the box. For verification you have +other boards work or do not work out of the box. +.sp +.B IMPORTANT: +For verification you have to test an ERASE and/or WRITE operation, so make sure you only do that if you have proper means to recover from failure! .TP @@ -164,19 +177,21 @@ .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI translation unit)" +.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI\ +translation unit)" .sp -.BR "* ft2232_spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)" +.BR "* ft2232_spi" " (for SPI flash ROMs attached to a FT2232H/FT4232H based\ +USB SPI programmer)" .sp .BR "* serprog" " (for flash ROMs attached to Urja's AVR programmer)" .sp -.BR "* buspirate_spi" " (for flash ROMs attached to a Bus Pirate)" +.BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)" .sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER SPECIFIC INFO section. Support for some programmers can be disabled at compile time. -.B "flashrom -h" +.B "flashrom \-h" lists all supported programmers. .TP .B "\-h, \-\-help" @@ -196,13 +211,16 @@ and write support (and probe support on old systems with parallel flash). The mainboard brand and model (if it requires specific code) is usually autodetected using one of the following mechanisms: If your system is -running coreboot, the mainboard type is determined from the coreboot table, -otherwise, the mainboard is detected by examining the onboard PCI devices +running coreboot, the mainboard type is determined from the coreboot table. +Otherwise, the mainboard is detected by examining the onboard PCI devices and possibly DMI info. If PCI and DMI do not contain information to uniquely identify the mainboard (which is the exception), it might be necessary to -specify the mainboard using the \-m switch (see above). +specify the mainboard using the +.B \-m +switch (see above). .sp -Some of these board-specific flash enabling functions (called board enables) +Some of these board-specific flash enabling functions (called +.BR "board enables" ) in flashrom have not yet been tested. If your mainboard is detected needing an untested board enable function, a warning message is printed and the board enable is not executed, because a wrong board enable function might @@ -217,15 +235,17 @@ The suggested procedure for a mainboard with untested board specific code is to first try to probe the ROM (just invoke flashrom and check that it detects your flash chip type) without running the board enable code (i.e. -without any parameters). If it finds your chip, fine, otherwise, retry +without any parameters). If it finds your chip, fine. Otherwise, retry probing your chip with the board-enable code running, using .sp -.B "flashrom -p internal:boardenable=force" +.B " flashrom \-p internal:boardenable=force" .sp If your chip is still not detected, the board enable code seems to be broken or the flash chip unsupported. Otherwise, make a backup of your current ROM -contents (using \-r) and store it to a medium outside of your computer, like -an USB drive or a network share. If you needed to run the board enable code +contents (using +.BR \-r ) +and store it to a medium outside of your computer, like +a USB drive or a network share. If you needed to run the board enable code already for probing, use it for reading too. Now you can try to write the new image. You should enable the board enable code in any case now, as it has been written because it is known that writing/erasing without the board @@ -237,21 +257,27 @@ If flashrom detects that the image you want to write and the current board do not match, it will refuse to write the image unless you specify .sp -.B "flashrom -p internal:boardmismatch=force" +.B " flashrom \-p internal:boardmismatch=force" .sp If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus -translation, flashrom should autodetect that configuration. You can use +translation, flashrom should autodetect that configuration. You can use the +.sp +.B " flashrom \-p internal:it87spiport=portnum" .sp -.B "flashrom -p internal:it87spiport=portnum" syntax as explained in the .B it87spi programmer section to use a non-default port for controlling the IT87 series -Super I/O. In the unlikely case flashrom doesn't detect an active IT87 LPC<->SPI -bridge, you can try to force recognition by using the it87spi programmer. +Super I/O. In the unlikely case flashrom doesn't detect an active +IT87 LPC<->SPI bridge, you can try to force recognition by using the +.B it87spi +programmer. .sp Using flashrom on laptops is dangerous and may easily make your hardware -unusable (see also the BUGS section). The embedded controller (EC) in these -machines often interacts badly with flashing. http://www.flashrom.org/Laptops +unusable (see also the +.B BUGS +section). The embedded controller (EC) in these +machines often interacts badly with flashing. +.B http://www.flashrom.org/Laptops has more information. If flash is shared with the EC, erase is guaranteed to brick your laptop and write is very likely to brick your laptop. Chip read and probe may irritate your EC and cause fan failure, backlight @@ -260,7 +286,7 @@ reasons. If you want to proceed anyway at your own risk, use .sp -.B "flashrom -p internal:laptop=force_I_want_a_brick" +.B " flashrom \-p internal:laptop=force_I_want_a_brick" .sp You have been warned. .sp @@ -270,22 +296,23 @@ .BR "dummy " programmer An optional parameter specifies the bus types it should support. For that you have to use the -.B "flashrom -p dummy:type" +.B "flashrom \-p dummy:type" syntax where .B type can be any comma-separated combination of -.B parallel lpc fwh spi all -in any order. +.BR parallel ", " lpc ", " fwh ", " spi ", or " all +(in any order). .sp Example: -.B "flashrom -p dummy:lpc,fwh" +.B "flashrom \-p dummy:lpc,fwh" .TP -.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " gfxnvidia" , " satasii " and " atahpt " programmers +.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " gfxnvidia" , " satasii\ +" and " atahpt " programmers These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported by the selected programmer is installed in your system. The syntax is -.B "flashrom -p xxxx:bb:dd.f" -, where +.BR "flashrom \-p xxxx:bb:dd.f" , +where .B xxxx is the name of the programmer .B bb @@ -293,32 +320,38 @@ .B dd is the PCI device number, and .B f -is the PCI function number of the desired NIC. +is the PCI function number of the desired device. .sp Example: -.B "flashrom -p nic3com:05:04.0" +.B "flashrom \-p nic3com:05:04.0" .TP .BR "it87spi " programmer -An optional parameter sets the I/O base port of the IT87* SPI controller +An optional +.B it87spiport +parameter sets the I/O base port of the IT87 series SPI controller interface to the port specified in the parameter instead of using the port address set by the BIOS. For that you have to use the -.B "flashrom -p it87spi:it87spiport=portnum" +.sp +.B " flashrom \-p it87spi:it87spiport=portnum" +.sp syntax where .B portnum is an I/O port number which must be a multiple of 8. .TP .BR "ft2232_spi " programmer -An optional parameter species the controller +An optional parameter specifies the controller type and interface/port it should support. For that you have to use the -.B "flashrom -p ft2232_spi:model,port=interface" +.sp +.B " flashrom \-p ft2232_spi:model,port=interface" +.sp syntax where .B model can be any of -.B 2232H 4232H +.BR 2232H ", or " 4232H and .B interface can be any of -.BR "A B" . +.BR A ", or " B . The default model is .B 4232H and the default interface is @@ -329,32 +362,43 @@ device/baud combination or an IP/port combination for communication with the programmer. In the device/baud combination, the device has to start with a slash. For serial, you have to use the -.B "flashrom -p serprog:/dev/device:baud" +.sp +.B " flashrom \-p serprog:/dev/device:baud" +.sp syntax and for IP, you have to use -.B "flashrom -p serprog:ip:port" -instead. More information about serprog is available in serprog-protocol.txt in -the source distribution. +.sp +.B " flashrom \-p serprog:ip:port" +.sp +instead. More information about serprog is available in +.B serprog-protocol.txt +in the source distribution. .TP .BR "buspirate_spi " programmer -A required dev parameter specifies the Bus Pirate device node and an optional -spispeed parameter specifies the frequency of the SPI bus. The parameter +A required +.B dev +parameter specifies the Bus Pirate device node and an optional +.B spispeed +parameter specifies the frequency of the SPI bus. The parameter delimiter is a comma. Syntax is .sp -.B "flashrom -p buspirate_spi:dev=/dev/device,spispeed=frequency" +.B "flashrom \-p buspirate_spi:dev=/dev/device,spispeed=frequency" .sp where .B frequency can be any of -.B 30k 125k 250k 1M 2M 2.6M 4M 8M +.BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M ", " 8M (in Hz). The default is the maximum frequency of 8 MHz. .SH EXIT STATUS flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem (/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails. .SH BUGS Please report any bugs at -.BR http://www.flashrom.org/trac/flashrom/newticket "," +.sp +.B " http://www.flashrom.org/trac/flashrom/newticket" +.sp or on the flashrom mailing list at -.BR http://www.flashrom.org/mailman/listinfo/flashrom "." +.sp +.B " http://www.flashrom.org/mailman/listinfo/flashrom" .sp Using flashrom on laptops is dangerous and may easily make your hardware unusable unless you can desolder the flash chip and have a full flash chip @@ -415,6 +459,6 @@ .br some others .PP -This manual page was written by Uwe Hermann <uwe(a)hermann-uwe.de> and Carl-Daniel -Hailfinger. +This manual page was written by Uwe Hermann <uwe(a)hermann-uwe.de> +and Carl-Daniel Hailfinger. It is licensed under the terms of the GNU GPL (version 2 or later).

1 0

[PATCH] board_enable.c: Remove useless 'name' parameter
by Uwe Hermann 07 Jun '10

07 Jun '10

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1037 - trunk
by repository service 07 Jun '10

07 Jun '10

Author: uwe Date: Mon Jun 7 21:06:26 2010 New Revision: 1037 URL: http://flashrom.org/trac/coreboot/changeset/1037 Log: board_enable.c: Remove useless 'name' parameter. Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/flash.h trunk/wbsio_spi.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/board_enable.c Mon Jun 7 21:06:26 2010 (r1037) @@ -98,16 +98,14 @@ /** * SMSC FDC37B787: Raise GPIO50 */ - -static int fdc37b787_gpio50_raise(uint16_t port, const char * name) +static int fdc37b787_gpio50_raise(uint16_t port) { uint8_t id, val; OUTB(0x55, port); /* enter conf mode */ id = sio_read(port, 0x20); if (id != 0x44) { - msg_perr("\nERROR: %s: FDC37B787: Wrong ID 0x%02X.\n", - name, id); + msg_perr("\nERROR: FDC37B787: Wrong ID 0x%02X.\n", id); OUTB(0xAA, port); /* leave conf mode */ return -1; } @@ -117,8 +115,7 @@ val = sio_read(port, 0xC8); /* GP50 */ if ((val & 0x1B) != 0x10) /* output, no invert, GPIO */ { - msg_perr("\nERROR: %s: GPIO50 mode 0x%02X unexpected.\n", - name, val); + msg_perr("\nERROR: GPIO50 mode 0x%02X unexpected.\n", val); OUTB(0xAA, port); return -1; } @@ -132,9 +129,9 @@ /** * Suited for Nokia IP530: Intel 440BX + PIIX4 + FDC37B787 */ -static int fdc37b787_gpio50_raise_3f0(const char *name) +static int fdc37b787_gpio50_raise_3f0(void) { - return fdc37b787_gpio50_raise(0x3f0, name); + return fdc37b787_gpio50_raise(0x3f0); } /** @@ -144,14 +141,14 @@ * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(uint16_t port, const char *name) +static int w83627hf_gpio24_raise(uint16_t port) { w836xx_ext_enter(port); /* Is this the W83627HF? */ if (sio_read(port, 0x20) != 0x52) { /* Super I/O device ID reg. */ - msg_perr("\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, sio_read(port, 0x20)); + msg_perr("\nERROR: W83627HF: Wrong ID: 0x%02X.\n", + sio_read(port, 0x20)); w836xx_ext_leave(port); return -1; } @@ -172,9 +169,9 @@ return 0; } -static int w83627hf_gpio24_raise_2e(const char *name) +static int w83627hf_gpio24_raise_2e(void) { - return w83627hf_gpio24_raise(0x2e, name); + return w83627hf_gpio24_raise(0x2e); } /** @@ -184,14 +181,14 @@ * - MSI K8T Neo2-F * - MSI K8N-NEO3 */ -static int w83627thf_gpio4_4_raise(uint16_t port, const char *name) +static int w83627thf_gpio4_4_raise(uint16_t port) { w836xx_ext_enter(port); /* Is this the W83627THF? */ if (sio_read(port, 0x20) != 0x82) { /* Super I/O device ID reg. */ - msg_perr("\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", - name, sio_read(port, 0x20)); + msg_perr("\nERROR: W83627THF: Wrong ID: 0x%02X.\n", + sio_read(port, 0x20)); w836xx_ext_leave(port); return -1; } @@ -209,14 +206,14 @@ return 0; } -static int w83627thf_gpio4_4_raise_2e(const char *name) +static int w83627thf_gpio4_4_raise_2e(void) { - return w83627thf_gpio4_4_raise(0x2e, name); + return w83627thf_gpio4_4_raise(0x2e); } -static int w83627thf_gpio4_4_raise_4e(const char *name) +static int w83627thf_gpio4_4_raise_4e(void) { - return w83627thf_gpio4_4_raise(0x4e, name); + return w83627thf_gpio4_4_raise(0x4e); } /** @@ -240,7 +237,7 @@ * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 * - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237. */ -static int w836xx_memw_enable_2e(const char *name) +static int w836xx_memw_enable_2e(void) { w836xx_memw_enable(0x2E); @@ -251,7 +248,7 @@ * Suited for: * - Termtek TK-3370 (rev. 2.5b) */ -static int w836xx_memw_enable_4e(const char *name) +static int w836xx_memw_enable_4e(void) { w836xx_memw_enable(0x4E); @@ -261,7 +258,7 @@ /** * */ -static int it8705f_write_enable(uint8_t port, const char *name) +static int it8705f_write_enable(uint8_t port) { enter_conf_mode_ite(port); sio_mask(port, 0x24, 0x04, 0x04); /* Flash ROM I/F Writes Enable */ @@ -281,9 +278,9 @@ * * The SIS950 Super I/O probably requires the same flash write enable. */ -static int it8705f_write_enable_2e(const char *name) +static int it8705f_write_enable_2e(void) { - return it8705f_write_enable(0x2e, name); + return it8705f_write_enable(0x2e); } static int pc87360_gpio_set(uint8_t gpio, int raise) @@ -385,7 +382,7 @@ /** * Suited for ASUS M2V-MX: VIA K8M890 + VT8237A + IT8716F */ -static int via_vt823x_gpio5_raise(const char *name) +static int via_vt823x_gpio5_raise(void) { /* On M2V-MX: GPO5 is connected to WP# and TBL#. */ return via_vt823x_gpio_set(5, 1); @@ -394,7 +391,7 @@ /** * Suited for VIA EPIA N & NL. */ -static int via_vt823x_gpio9_raise(const char *name) +static int via_vt823x_gpio9_raise(void) { return via_vt823x_gpio_set(9, 1); } @@ -405,7 +402,7 @@ * We don't need to do this for EPIA M when using coreboot, GPIO15 is never * lowered there. */ -static int via_vt823x_gpio15_raise(const char *name) +static int via_vt823x_gpio15_raise(void) { return via_vt823x_gpio_set(15, 1); } @@ -417,7 +414,7 @@ * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235 * - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235 */ -static int board_msi_kt4v(const char *name) +static int board_msi_kt4v(void) { int ret; @@ -434,7 +431,7 @@ * We're basically talking to some unknown device on SMBus, my guess * is that it is the Winbond W83781D that lives near the DIP BIOS. */ -static int board_asus_p5a(const char *name) +static int board_asus_p5a(void) { uint8_t tmp; int i; @@ -453,7 +450,7 @@ } if (i == ASUSP5A_LOOP) { - msg_perr("%s: Unable to contact device.\n", name); + msg_perr("Unable to contact device.\n"); return -1; } @@ -469,7 +466,7 @@ } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { - msg_perr("%s: failed to read device.\n", name); + msg_perr("Failed to read device.\n"); return -1; } @@ -496,7 +493,7 @@ } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { - msg_perr("%s: failed to write to device.\n", name); + msg_perr("Failed to write to device.\n"); return -1; } @@ -508,7 +505,7 @@ * * It's not a Super I/O but it uses the same index/data port method. */ -static int board_hp_dl145_g3_enable(const char *name) +static int board_hp_dl145_g3_enable(void) { /* GPIO 0 reg from PM regs */ /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */ @@ -517,7 +514,7 @@ return 0; } -static int board_ibm_x3455(const char *name) +static int board_ibm_x3455(void) { /* raise gpio13 */ sio_mask(0xcd6, 0x45, 0x20, 0x20); @@ -528,7 +525,7 @@ /** * Suited for Shuttle FN25 (SN25P): AMD S939 + NVIDIA CK804 (nForce4). */ -static int board_shuttle_fn25(const char *name) +static int board_shuttle_fn25(void) { struct pci_dev *dev; @@ -612,7 +609,7 @@ * Suited for ASUS A8N-LA: nVidia MCP51. * Suited for ASUS M2NBP-VM CSM: NVIDIA MCP51. */ -static int nvidia_mcp_gpio0_raise(const char *name) +static int nvidia_mcp_gpio0_raise(void) { return nvidia_mcp_gpio_set(0x00, 1); } @@ -620,7 +617,7 @@ /** * Suited for Abit KN8 Ultra: nVidia CK804. */ -static int nvidia_mcp_gpio2_lower(const char *name) +static int nvidia_mcp_gpio2_lower(void) { return nvidia_mcp_gpio_set(0x02, 0); } @@ -629,7 +626,7 @@ * Suited for MSI K8N Neo4: NVIDIA CK804. * Suited for MSI K8N GM2-L: NVIDIA MCP51. */ -static int nvidia_mcp_gpio2_raise(const char *name) +static int nvidia_mcp_gpio2_raise(void) { return nvidia_mcp_gpio_set(0x02, 1); } @@ -645,7 +642,7 @@ * b) #TBL is hardwired on that board to a pull-down. It can be * overridden by connecting the two solder points next to F2. */ -static int nvidia_mcp_gpio5_raise(const char *name) +static int nvidia_mcp_gpio5_raise(void) { return nvidia_mcp_gpio_set(0x05, 1); } @@ -653,7 +650,7 @@ /** * Suited for Abit NF7-S: NVIDIA CK804. */ -static int nvidia_mcp_gpio8_raise(const char *name) +static int nvidia_mcp_gpio8_raise(void) { return nvidia_mcp_gpio_set(0x08, 1); } @@ -661,7 +658,7 @@ /** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ -static int nvidia_mcp_gpio10_raise(const char *name) +static int nvidia_mcp_gpio10_raise(void) { return nvidia_mcp_gpio_set(0x10, 1); } @@ -669,7 +666,7 @@ /** * Suited for the Gigabyte GA-K8N-SLI: CK804 southbridge. */ -static int nvidia_mcp_gpio21_raise(const char *name) +static int nvidia_mcp_gpio21_raise(void) { return nvidia_mcp_gpio_set(0x21, 0x01); } @@ -677,7 +674,7 @@ /** * Suited for EPoX EP-8RDA3+: Socket A + nForce2 Ultra 400 + MCP2. */ -static int nvidia_mcp_gpio31_raise(const char *name) +static int nvidia_mcp_gpio31_raise(void) { return nvidia_mcp_gpio_set(0x31, 0x01); } @@ -685,7 +682,7 @@ /** * Suited for Artec Group DBE61 and DBE62. */ -static int board_artecgroup_dbe6x(const char *name) +static int board_artecgroup_dbe6x(void) { #define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015 #define DBE6x_PRI_BOOT_LOC_SHIFT (2) @@ -798,7 +795,7 @@ /** * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards. */ -static int board_epox_ep_bx3(const char *name) +static int board_epox_ep_bx3(void) { return intel_piix4_gpo_set(22, 1); } @@ -806,7 +803,7 @@ /** * Suited for Intel SE440BX-2 */ -static int intel_piix4_gpo27_lower(const char *name) +static int intel_piix4_gpo27_lower(void) { return intel_piix4_gpo_set(27, 0); } @@ -1009,7 +1006,7 @@ * Suited for Abit IP35: Intel P35 + ICH9R. * Suited for Abit IP35 Pro: Intel P35 + ICH9R. */ -static int intel_ich_gpio16_raise(const char *name) +static int intel_ich_gpio16_raise(void) { return intel_ich_gpio_set(16, 1); } @@ -1017,7 +1014,7 @@ /** * Suited for ASUS A8JM: Intel 945 + ICH7 */ -static int intel_ich_gpio34_raise(const char *name) +static int intel_ich_gpio34_raise(void) { return intel_ich_gpio_set(34, 1); } @@ -1025,7 +1022,7 @@ /** * Suited for MSI MS-7046: LGA775 + 915P + ICH6. */ -static int intel_ich_gpio19_raise(const char *name) +static int intel_ich_gpio19_raise(void) { return intel_ich_gpio_set(19, 1); } @@ -1036,7 +1033,7 @@ * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5. * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. */ -static int intel_ich_gpio21_raise(const char *name) +static int intel_ich_gpio21_raise(void) { return intel_ich_gpio_set(21, 1); } @@ -1047,7 +1044,7 @@ * - ASUS P4B533-E: socket478 + 845E + ICH4 * - ASUS P4B-MX variant in HP Vectra VL420 SFF: socket478 + 845D + ICH2 */ -static int intel_ich_gpio22_raise(const char *name) +static int intel_ich_gpio22_raise(void) { return intel_ich_gpio_set(22, 1); } @@ -1056,7 +1053,7 @@ * Suited for HP Vectra VL400: 815 + ICH + PC87360. */ -static int board_hp_vl400(const char *name) +static int board_hp_vl400(void) { int ret; ret = intel_ich_gpio_set(25, 1); /* Master write enable ? */ @@ -1072,7 +1069,7 @@ * - Dell PowerEdge 1850: Intel PPGA604 + E7520 + ICH5R. * - ASRock P4i65GV: Intel Socket478 + 865GV + ICH5R. */ -static int intel_ich_gpio23_raise(const char *name) +static int intel_ich_gpio23_raise(void) { return intel_ich_gpio_set(23, 1); } @@ -1080,7 +1077,7 @@ /** * Suited for IBase MB899: i945GM + ICH7. */ -static int intel_ich_gpio26_raise(const char *name) +static int intel_ich_gpio26_raise(void) { return intel_ich_gpio_set(26, 1); } @@ -1088,7 +1085,7 @@ /** * Suited for Acorp 6A815EPD: socket 370 + intel 815 + ICH2. */ -static int board_acorp_6a815epd(const char *name) +static int board_acorp_6a815epd(void) { int ret; @@ -1103,7 +1100,7 @@ /** * Suited for Kontron 986LCD-M: socket478 + 915GM + ICH7R. */ -static int board_kontron_986lcd_m(const char *name) +static int board_kontron_986lcd_m(void) { int ret; @@ -1169,7 +1166,7 @@ /** * Suited for Abit VT6X4: Pro133x + VT82C686A */ -static int via_apollo_gpo4_lower(const char *name) +static int via_apollo_gpo4_lower(void) { return via_apollo_gpo_set(4, 0); } @@ -1177,7 +1174,7 @@ /** * Suited for Soyo SY-7VCA: Pro133A + VT82C686. */ -static int via_apollo_gpo0_lower(const char *name) +static int via_apollo_gpo0_lower(void) { return via_apollo_gpo_set(0, 0); } @@ -1186,7 +1183,7 @@ * Enable some GPIO pin on SiS southbridge. * Suited for MSI 651M-L: SiS651 / SiS962 */ -static int board_msi_651ml(const char *name) +static int board_msi_651ml(void) { struct pci_dev *dev; uint16_t base, temp; @@ -1250,7 +1247,7 @@ * Disable write protection on the Mitac 6513WU. WP# on the FWH is * connected to GP30 on the Super I/O, and TBL# is always high. */ -static int board_mitac_6513wu(const char *name) +static int board_mitac_6513wu(void) { struct pci_dev *dev; uint16_t rt_port; @@ -1282,7 +1279,7 @@ /** * Suited for ASUS A7V8X: VIA KT400 + VT8235 + IT8703F-A */ -static int board_asus_a7v8x(const char *name) +static int board_asus_a7v8x(void) { uint16_t id, base; uint8_t tmp; @@ -1376,7 +1373,7 @@ * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ -static int it8712f_gpio3_1_raise(const char *name) +static int it8712f_gpio3_1_raise(void) { return it8712f_gpio_set(32, 1); } @@ -1639,7 +1636,7 @@ "board \"%s %s\"... ", board->vendor_name, board->board_name); - ret = board->enable(board->vendor_name); + ret = board->enable(); if (ret) msg_pinfo("FAILED!\n"); else Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/flash.h Mon Jun 7 21:06:26 2010 (r1037) @@ -294,7 +294,7 @@ int max_rom_decode_parallel; int status; - int (*enable) (const char *name); + int (*enable) (void); }; extern struct board_pciid_enable board_pciid_enables[]; @@ -698,7 +698,7 @@ extern uint8_t *sb600_spibar; /* wbsio_spi.c */ -int wbsio_check_for_spi(const char *name); +int wbsio_check_for_spi(void); int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/wbsio_spi.c Mon Jun 7 21:06:26 2010 (r1037) @@ -59,7 +59,7 @@ return flashport; } -int wbsio_check_for_spi(const char *name) +int wbsio_check_for_spi(void) { if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT1))) if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT2)))

1 0

Re: [flashrom] [PATCH] Split AMD CS5536 chipset enable
by Nils 07 Jun '10

07 Jun '10

Hi Carl-Daniel, You wrote: >Is it possible to combine a Geode LX with a CS5535 or even a CS5530? >Is it possible to combine a Geode GX (or earlier) with a CS5536? The answer is :Yes. The Wyse S50 combines a GX (GX2) with a CS5536. I am using Flashrom on it since my patch to enable it was committed in rev 729. At the moment i use v0.9.1-r894 and it works nice. >If the answer to any of the questions above is "yes", the split probably >makes sense and we should execute the processor specific enable function >inside the new processor enable routine in flashrom. (P.s. i am not following this list closely, i just stumbled upon this message) Thanks,Nils.

1 0

Verified flash device report
by Joshua Blanton 07 Jun '10

07 Jun '10

I have verified the ST M25P128 part using the FT2232H SPI programmer (this chip is on a board that I'm developing), running at 15MHz (5x clock, DIVIDE_BY=2). Attached are the -V outputs for a probe, read, write, and erase cycle. Thanks, Josh flashrom v0.9.2-r1026 on Linux 2.6.26.8-57.fc8 (i686), built with libpci 2.2.9, GCC 4.1.2 20070925 (Red Hat 4.1.2-33), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... 1872M loops per second, 10 myus = 10 us, 100 myus = 92 us, 1000 myus = 924 us, 10000 myus = 9438 us, OK. Initializing ft2232_spi programmer Using device type 2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 15.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x08, id2 0xa191 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "ST M25P128" (16384 KB, SPI) at physical address 0xff000000. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x0, id2 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. flashrom v0.9.2-r1026 on Linux 2.6.26.8-57.fc8 (i686), built with libpci 2.2.9, GCC 4.1.2 20070925 (Red Hat 4.1.2-33), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... 1738M loops per second, delay more than 10% too short, recalculating... 1576M loops per second, delay more than 10% too short, recalculating... 1659M loops per second, delay more than 10% too short, recalculating... 1324M loops per second, delay more than 10% too short, recalculating... 1652M loops per second, 10 myus = 21 us, 100 myus = 113 us, 1000 myus = 817 us, 10000 myus = 8236 us, OK. Initializing ft2232_spi programmer Using device type 2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 15.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x18, id2 0xbdd7 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "ST M25P128" (16384 KB, SPI) at physical address 0xff000000. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x0, id2 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. flashrom v0.9.2-r1026 on Linux 2.6.26.8-57.fc8 (i686), built with libpci 2.2.9, GCC 4.1.2 20070925 (Red Hat 4.1.2-33), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... 1746M loops per second, delay more than 10% too short, recalculating... 1495M loops per second, delay more than 10% too short, recalculating... 994M loops per second, delay more than 10% too short, recalculating... 1670M loops per second, delay more than 10% too short, recalculating... 1469M loops per second, 10 myus = 20 us, 100 myus = 73 us, 1000 myus = 744 us, 10000 myus = 12574 us, OK. Initializing ft2232_spi programmer Using device type 2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 15.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "ST M25P128" (16384 KB, SPI) at physical address 0xff000000. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x0, id2 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x03ffff, 0x040000-0x07ffff, 0x080000-0x0bffff, 0x0c0000-0x0fffff, 0x100000-0x13ffff, 0x140000-0x17ffff, 0x180000-0x1bffff, 0x1c0000-0x1fffff, 0x200000-0x23ffff, 0x240000-0x27ffff, 0x280000-0x2bffff, 0x2c0000-0x2fffff, 0x300000-0x33ffff, 0x340000-0x37ffff, 0x380000-0x3bffff, 0x3c0000-0x3fffff, 0x400000-0x43ffff, 0x440000-0x47ffff, 0x480000-0x4bffff, 0x4c0000-0x4fffff, 0x500000-0x53ffff, 0x540000-0x57ffff, 0x580000-0x5bffff, 0x5c0000-0x5fffff, 0x600000-0x63ffff, 0x640000-0x67ffff, 0x680000-0x6bffff, 0x6c0000-0x6fffff, 0x700000-0x73ffff, 0x740000-0x77ffff, 0x780000-0x7bffff, 0x7c0000-0x7fffff, 0x800000-0x83ffff, 0x840000-0x87ffff, 0x880000-0x8bffff, 0x8c0000-0x8fffff, 0x900000-0x93ffff, 0x940000-0x97ffff, 0x980000-0x9bffff, 0x9c0000-0x9fffff, 0xa00000-0xa3ffff, 0xa40000-0xa7ffff, 0xa80000-0xabffff, 0xac0000-0xafffff, 0xb00000-0xb3ffff, 0xb40000-0xb7ffff, 0xb80000-0xbbffff, 0xbc0000-0xbfffff, 0xc00000-0xc3ffff, 0xc40000-0xc7ffff, 0xc80000-0xcbffff, 0xcc0000-0xcfffff, 0xd00000-0xd3ffff, 0xd40000-0xd7ffff, 0xd80000-0xdbffff, 0xdc0000-0xdfffff, 0xe00000-0xe3ffff, 0xe40000-0xe7ffff, 0xe80000-0xebffff, 0xec0000-0xefffff, 0xf00000-0xf3ffff, 0xf40000-0xf7ffff, 0xf80000-0xfbffff, 0xfc0000-0xffffff, SUCCESS. done. total_size is 16777216 COMPLETE. Verifying flash... VERIFIED. flashrom v0.9.2-r1026 on Linux 2.6.26.8-57.fc8 (i686), built with libpci 2.2.9, GCC 4.1.2 20070925 (Red Hat 4.1.2-33), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... 1814M loops per second, delay more than 10% too short, recalculating... 1804M loops per second, delay more than 10% too short, recalculating... 1826M loops per second, 10 myus = 10 us, 100 myus = 90 us, 1000 myus = 904 us, 10000 myus = 11389 us, OK. Initializing ft2232_spi programmer Using device type 2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 15.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x58, id2 0x7aa7 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "ST M25P128" (16384 KB, SPI) at physical address 0xff000000. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x20, id2 0x2018 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x0, id2 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x03ffff, 0x040000-0x07ffff, 0x080000-0x0bffff, 0x0c0000-0x0fffff, 0x100000-0x13ffff, 0x140000-0x17ffff, 0x180000-0x1bffff, 0x1c0000-0x1fffff, 0x200000-0x23ffff, 0x240000-0x27ffff, 0x280000-0x2bffff, 0x2c0000-0x2fffff, 0x300000-0x33ffff, 0x340000-0x37ffff, 0x380000-0x3bffff, 0x3c0000-0x3fffff, 0x400000-0x43ffff, 0x440000-0x47ffff, 0x480000-0x4bffff, 0x4c0000-0x4fffff, 0x500000-0x53ffff, 0x540000-0x57ffff, 0x580000-0x5bffff, 0x5c0000-0x5fffff, 0x600000-0x63ffff, 0x640000-0x67ffff, 0x680000-0x6bffff, 0x6c0000-0x6fffff, 0x700000-0x73ffff, 0x740000-0x77ffff, 0x780000-0x7bffff, 0x7c0000-0x7fffff, 0x800000-0x83ffff, 0x840000-0x87ffff, 0x880000-0x8bffff, 0x8c0000-0x8fffff, 0x900000-0x93ffff, 0x940000-0x97ffff, 0x980000-0x9bffff, 0x9c0000-0x9fffff, 0xa00000-0xa3ffff, 0xa40000-0xa7ffff, 0xa80000-0xabffff, 0xac0000-0xafffff, 0xb00000-0xb3ffff, 0xb40000-0xb7ffff, 0xb80000-0xbbffff, 0xbc0000-0xbfffff, 0xc00000-0xc3ffff, 0xc40000-0xc7ffff, 0xc80000-0xcbffff, 0xcc0000-0xcfffff, 0xd00000-0xd3ffff, 0xd40000-0xd7ffff, 0xd80000-0xdbffff, 0xdc0000-0xdfffff, 0xe00000-0xe3ffff, 0xe40000-0xe7ffff, 0xe80000-0xebffff, 0xec0000-0xefffff, 0xf00000-0xf3ffff, 0xf40000-0xf7ffff, 0xf80000-0xfbffff, 0xfc0000-0xffffff, SUCCESS.

1 0

[PATCH] AT49F020 support
by Andrew Morgan 07 Jun '10

07 Jun '10

Hi, Patch and test results for AT49F020 256KB parallel flash chip as found in a 56K modem. Read after erase was all 0xFF. Write and verify a random file worked. The datasheet says it is whole-chip-erase only. I haven't verified everything against the datasheet, but as my tests found that it works here's the patch. Signed-off-by: Andrew Morgan <ziltro(a)ziltro.com> -- Andrew.

2 1

[commit] r1036 - trunk
by repository service 07 Jun '10

07 Jun '10

Author: hailfinger Date: Mon Jun 7 16:10:55 2010 New Revision: 1036 URL: http://flashrom.org/trac/coreboot/changeset/1036 Log: Support Atmel AT49F020 256kB parallel flash. Signed-off-by: Andrew Morgan <ziltro(a)ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Jun 7 13:10:43 2010 (r1035) +++ trunk/flashchips.c Mon Jun 7 16:10:55 2010 (r1036) @@ -1072,6 +1072,29 @@ { .vendor = "Atmel", + .name = "AT49F020", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = AT_49F020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Atmel", .name = "AT49F002(N)", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Mon Jun 7 13:10:43 2010 (r1035) +++ trunk/flashchips.h Mon Jun 7 16:10:55 2010 (r1036) @@ -144,6 +144,7 @@ #define AT_45DB642 /* No ID available */ #define AT_45DB642D 0x2800 #define AT_49BV512 0x03 +#define AT_49F020 0x0B #define AT_49F002N 0x07 /* for AT49F002(N) */ #define AT_49F002NT 0x08 /* for AT49F002(N)T */

1 0

SST SST49LF020 / ASUS A7V8X-X
by Mateusz Murawski 07 Jun '10

07 Jun '10

Hi Probing and reading ok. Patch and logs in attachments. Signed-off-by: Mateusz Murawski <matowy(a)tlen.pl>

2 1

Re: [flashrom] Read the content of AT49F002(N)T on Syntax SV266A
by Paul Menzel 07 Jun '10

07 Jun '10

[ Please CC me, as I am not subscribed. ] [ This thread was started on the coreboot list [1]. ] [1] http://www.coreboot.org/pipermail/coreboot/2009-March/045774.html Am Sonntag, den 22.03.2009, 19:43 +0100 schrieb Paul Menzel: > Am Montag, den 23.03.2009, 02:29 +0800 schrieb FENG Yu Ning: > > 2009/3/23 Paul Menzel <paulepanter(a)users.sourceforge.net>: > > […] > > > > I tried flashrom with the different delays (10, 100, 1000, 10000, 40000 > > > all in us) afterwards, but the image did not differ. > > > > How about probing? does auto-detect work now? > > I am afraid it does not. > > $ cat /proc/mtrr > reg00: base=0x00000000 ( 0MB), size= 512MB: write-back, count=1 > reg01: base=0xd0000000 (3328MB), size= 128MB: write-combining, count=1 > reg02: base=0xd0000000 (3328MB), size= 128MB: write-combining, count=1 > reg03: base=0xd8000000 (3456MB), size= 64MB: write-combining, count=1 > reg04: base=0xfffc0000 (4095MB), size= 256KB: uncachable, count=1 > $ $ sudo ./flashrom -V > Calibrating delay loop... 490M loops per second, 100 myus = 141 us. OK. […] Currently I am having access to this machine again, so I tried with v0.9.2-r1033. Unfortunately I still cannot report success on auto-detection. Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x25, id2 0xe4, id1 is normal flash content, id2 is normal flash content […] No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Did something change in the flashrom infrastructure/source, that makes adding support for this board easier than over a year ago? I checked different probe timings (10, 100, 1000, 10000, 40000; all in us) modifying `flashchips.c` and with and without modifying the MTRR settings. $ cat /proc/mtrr reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back reg01: base=0x0d0000000 ( 3328MB), size= 128MB, count=1: write-combining reg02: base=0x0d0000000 ( 3328MB), size= 128MB, count=1: write-combining reg03: base=0x0d8000000 ( 3456MB), size= 128MB, count=1: write-combining $ sudo sh -c 'echo "base=0xfffc0000 size=0x40000 type=uncachable" >| /proc/mtrr' $ more /proc/mtrr reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back reg01: base=0x0d0000000 ( 3328MB), size= 128MB, count=1: write-combining reg02: base=0x0d0000000 ( 3328MB), size= 128MB, count=1: write-combining reg03: base=0x0d8000000 ( 3456MB), size= 128MB, count=1: write-combining reg04: base=0x0fffc0000 ( 4095MB), size= 256KB, count=1: uncachable Probably unrelated but back then the output for `reg03` was different. reg03: base=0xd8000000 (3456MB), size= 64MB: write-combining, count=1 I am probably forced to do a BIOS upgrade on this board. Is there a chance I will be able to do this using flashrom? Thanks, Paul

2 2

[PATCH] Split AMD CS5536 chipset enable
by Carl-Daniel Hailfinger 07 Jun '10

07 Jun '10

Split AMD CS5536 chipset enable in a processor function (Geode RCONF) and a southbridge function (CS5536 NOR flash control). This patch has no functional changes. Is it possible to combine a Geode LX with a CS5535 or even a CS5530? Is it possible to combine a Geode GX (or earlier) with a CS5536? If the answer to any of the questions above is "yes", the split probably makes sense and we should execute the processor specific enable function inside the new processor enable routine in flashrom. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-geodelx_cs5536_chipsetenable_split/chipset_enable.c =================================================================== --- flashrom-geodelx_cs5536_chipsetenable_split/chipset_enable.c (Revision 1035) +++ flashrom-geodelx_cs5536_chipsetenable_split/chipset_enable.c (Arbeitskopie) @@ -728,16 +728,12 @@ /** * Geode systems write protect the BIOS via RCONFs (cache settings similar - * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22. - * - * Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL. - * To enable write to NOR Boot flash for the benefit of systems that have such - * a setup, raise MSR 0x51400018 WE_CS3 (write enable Boot Flash Chip Select). + * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22. + * FIXME: Is this only for Geode LX or also for other Geode models? */ -static int enable_flash_cs5536(struct pci_dev *dev, const char *name) +static int enable_flash_geode(void) { #define MSR_RCONF_DEFAULT 0x1808 -#define MSR_NORF_CTL 0x51400018 msr_t msr; @@ -751,6 +747,30 @@ wrmsr(MSR_RCONF_DEFAULT, msr); } + cleanup_cpu_msr(); + +#undef MSR_RCONF_DEFAULT + return 0; +} + +/** + * CS5536 systems also write protect the NOR flash chip itself via MSR_NORF_CTL. + * To enable write to NOR Boot flash for the benefit of systems that have such + * a setup, raise MSR 0x51400018 WE_CS3 (write enable Boot Flash Chip Select). + */ +static int enable_flash_cs5536(struct pci_dev *dev, const char *name) +{ +#define MSR_NORF_CTL 0x51400018 + + msr_t msr; + + if (enable_flash_geode()) + return -1; + + /* Geode only has a single core */ + if (setup_cpu_msr(0)) + return -1; + msr = rdmsr(MSR_NORF_CTL); /* Raise WE_CS3 bit. */ msr.lo |= 0x08; @@ -758,7 +778,6 @@ cleanup_cpu_msr(); -#undef MSR_RCONF_DEFAULT #undef MSR_NORF_CTL return 0; } -- http://www.hailfinger.org/

1 0

[PATCH] Fix wiki board enable parameter printing
by Carl-Daniel Hailfinger 07 Jun '10

07 Jun '10

Fix wiki board enable parameter printing. The logic was incorrect in one place which had && instead of ||. Move the board info #define B to the file where it is used. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-print_wiki_boardenable_param_fix/flash.h =================================================================== --- flashrom-print_wiki_boardenable_param_fix/flash.h (revision 1033) +++ flashrom-print_wiki_boardenable_param_fix/flash.h (working copy) @@ -309,12 +309,6 @@ #endif }; -#ifdef CONFIG_PRINT_WIKI -#define B(vendor, name, status, url, note) { vendor, name, status, url, note } -#else -#define B(vendor, name, status, url, note) { vendor, name, status } -#endif - extern const struct board_info boards_known[]; extern const struct board_info laptops_known[]; Index: flashrom-print_wiki_boardenable_param_fix/print_wiki.c =================================================================== --- flashrom-print_wiki_boardenable_param_fix/print_wiki.c (revision 1033) +++ flashrom-print_wiki_boardenable_param_fix/print_wiki.c (working copy) @@ -145,9 +145,9 @@ color = !color; k = 0; - while ((b[k].vendor_name != NULL) - && strcmp(b[k].vendor_name, boards[i].vendor) - && strcmp(b[k].board_name, boards[i].name)) { + while ((b[k].vendor_name != NULL) && + (strcmp(b[k].vendor_name, boards[i].vendor) || + strcmp(b[k].board_name, boards[i].name))) { k++; } Index: flashrom-print_wiki_boardenable_param_fix/print.c =================================================================== --- flashrom-print_wiki_boardenable_param_fix/print.c (revision 1033) +++ flashrom-print_wiki_boardenable_param_fix/print.c (working copy) @@ -245,6 +245,13 @@ } #if CONFIG_INTERNAL == 1 + +#ifdef CONFIG_PRINT_WIKI +#define B(vendor, name, status, url, note) { vendor, name, status, url, note } +#else +#define B(vendor, name, status, url, note) { vendor, name, status } +#endif + /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) -- http://www.hailfinger.org/

2 2

[commit] r1035 - trunk
by repository service 07 Jun '10

07 Jun '10

Author: hailfinger Date: Mon Jun 7 13:10:43 2010 New Revision: 1035 URL: http://flashrom.org/trac/coreboot/changeset/1035 Log: Fix wiki board enable parameter printing. The logic was incorrect in one place which had && instead of ||. Move the board info #define B to the file where it is used. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flash.h trunk/print.c trunk/print_wiki.c Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon Jun 7 13:08:07 2010 (r1034) +++ trunk/flash.h Mon Jun 7 13:10:43 2010 (r1035) @@ -309,12 +309,6 @@ #endif }; -#ifdef CONFIG_PRINT_WIKI -#define B(vendor, name, status, url, note) { vendor, name, status, url, note } -#else -#define B(vendor, name, status, url, note) { vendor, name, status } -#endif - extern const struct board_info boards_known[]; extern const struct board_info laptops_known[]; Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Jun 7 13:08:07 2010 (r1034) +++ trunk/print.c Mon Jun 7 13:10:43 2010 (r1035) @@ -245,6 +245,13 @@ } #if CONFIG_INTERNAL == 1 + +#ifdef CONFIG_PRINT_WIKI +#define B(vendor, name, status, url, note) { vendor, name, status, url, note } +#else +#define B(vendor, name, status, url, note) { vendor, name, status } +#endif + /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Mon Jun 7 13:08:07 2010 (r1034) +++ trunk/print_wiki.c Mon Jun 7 13:10:43 2010 (r1035) @@ -145,9 +145,9 @@ color = !color; k = 0; - while ((b[k].vendor_name != NULL) - && strcmp(b[k].vendor_name, boards[i].vendor) - && strcmp(b[k].board_name, boards[i].name)) { + while ((b[k].vendor_name != NULL) && + (strcmp(b[k].vendor_name, boards[i].vendor) || + strcmp(b[k].board_name, boards[i].name))) { k++; }

1 0

[PATCH] flashrom dependencies
by Stefan Reinauer 07 Jun '10

07 Jun '10

With the attached patch it is no longer necessary to have an extra dependency step. -- coresystems GmbH . Brahmsstr. 16 . D-79104 Freiburg i. Br. Tel.: +49 761 7668825 . Fax: +49 761 7664613 Email: info(a)coresystems.de . http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg . HRB 7656 Geschäftsführer: Stefan Reinauer . Ust-IdNr.: DE245674866

2 5

[commit] r1034 - trunk
by repository service 07 Jun '10

07 Jun '10

Author: hailfinger Date: Mon Jun 7 13:08:07 2010 New Revision: 1034 URL: http://flashrom.org/trac/coreboot/changeset/1034 Log: Create dependencies on the fly rather than in a separate step. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ (props changed) trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Jun 5 01:24:57 2010 (r1033) +++ trunk/Makefile Mon Jun 7 13:08:07 2010 (r1034) @@ -65,7 +65,7 @@ PROGRAMMER_OBJS = udelay.o programmer.o -all: pciutils features dep $(PROGRAM) +all: pciutils features $(PROGRAM) # Set the flashrom version string from the highest revision number # of the checked out flashrom files. @@ -255,18 +255,15 @@ TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root") %.o: %.c .features - $(CC) $(CFLAGS) $(CPPFLAGS) $(FEATURE_CFLAGS) $(SVNDEF) -o $@ -c $< + $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FEATURE_CFLAGS) $(SVNDEF) -o $@ -c $< # Make sure to add all names of generated binaries here. # This includes all frontends and libflashrom. clean: - rm -f $(PROGRAM) $(PROGRAM).exe *.o + rm -f $(PROGRAM) $(PROGRAM).exe *.o *.d distclean: clean - rm -f .dependencies .features .libdeps - -dep: - @$(CC) $(CPPFLAGS) $(SVNDEF) -MM $(OBJS:.o=.c) > .dependencies + rm -f .features .libdeps strip: $(PROGRAM) $(STRIP) $(STRIP_ARGS) $(PROGRAM) @@ -367,6 +364,6 @@ djgpp-dos: clean make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip WARNERROR=no OS_ARCH=DOS -.PHONY: all clean distclean dep compiler pciutils features export tarball dos +.PHONY: all clean distclean compiler pciutils features export tarball dos --include .dependencies +-include $(OBJS:.o=.d)

1 0

[PATCH 3/3] Unify board info handling
by Peter Lemenkov 07 Jun '10

07 Jun '10

Hello All! 2010/5/26 Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de>: >> Moved all data to board_enable.c to avoid duplicating. > I think print.c is the better location. Done. > I didn't tell you last time, but having the working field behind the > URL/note field in the line moves it out of the 80 column screen. The > contra-URL fraction might be annoyed by it. Please put URL/note last in > the structure. All URL/Notes moved to the end. Ok, here is a new patch (I still don't ubderstand the proper way I should change section, responsible for printing information about board_enable): Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- flash.h | 18 ++- print.c | 450 +++++++++++++++++++++++++++++++--------------------------- print_wiki.c | 404 ++++------------------------------------------------ 3 files changed, 284 insertions(+), 588 deletions(-) diff --git a/flash.h b/flash.h index a201af3..dc251f0 100644 --- a/flash.h +++ b/flash.h @@ -303,12 +303,22 @@ extern struct board_pciid_enable board_pciid_enables[]; struct board_info { const char *vendor; const char *name; + const int working; +#ifdef PRINT_WIKI_SUPPORT + const char *url; + const char *note; +#endif /* PRINT_WIKI_SUPPORT */ }; -extern const struct board_info boards_ok[]; -extern const struct board_info boards_bad[]; -extern const struct board_info laptops_ok[]; -extern const struct board_info laptops_bad[]; +#ifdef PRINT_WIKI_SUPPORT +#define BOARD_ENTRY(vendor, name, status, url, note) { vendor, name, status, url, note } +#else +#define BOARD_ENTRY(vendor, name, status, url, note) { vendor, name, status } +#endif + +extern const struct board_info boards_known[]; +extern const struct board_info laptops_known[]; + #endif /* udelay.c */ diff --git a/print.c b/print.c index a8da65f..aa3aea3 100644 --- a/print.c +++ b/print.c @@ -168,59 +168,46 @@ void print_supported_chipsets(void) } } -void print_supported_boards_helper(const struct board_info *b, const char *msg) +void print_supported_boards_helper(const struct board_info *boards, const char *devicetype) { - int i, j, boardcount = 0; - - for (i = 0; b[i].vendor != NULL; i++) - boardcount++; - - printf("\n%s (total: %d):\n\n", msg, boardcount); - - for (i = 0; b[i].vendor != NULL; i++) { - printf("%s", b[i].vendor); - for (j = 0; j < 25 - strlen(b[i].vendor); j++) - printf(" "); - printf("%s", b[i].name); - for (j = 0; j < 28 - strlen(b[i].name); j++) - printf(" "); - printf("\n"); - } -} - -void print_supported_boards(void) -{ - int i, j, boardcount = 0; + int i, j, k, boardcount = 0; struct board_pciid_enable *b = board_pciid_enables; - for (i = 0; b[i].vendor_name != NULL; i++) + /* Print known mainboards */ + for (i = 0; boards[i].vendor != NULL; i++) boardcount++; - printf("\nSupported boards which need write-enable code (total: %d):" - "\n\nVendor: Board: " - "Required option:\n\n", boardcount); + printf("\nKnown %s (total: %d):" + "\n\nVendor: Board: Status: Write-enable option?" + "\n\n", devicetype, boardcount); - for (i = 0; b[i].vendor_name != NULL; i++) { - printf("%s", b[i].vendor_name); - for (j = 0; j < 25 - strlen(b[i].vendor_name); j++) + for (i = 0; boards[i].vendor != NULL; i++) { + printf("%s", boards[i].vendor); + for (j = 0; j < 25 - strlen(boards[i].vendor); j++) printf(" "); - printf("%s", b[i].board_name); - for (j = 0; j < 30 - strlen(b[i].board_name); j++) + printf("%s", boards[i].name); + for (j = 0; j < 28 - strlen(boards[i].name); j++) printf(" "); - if (b[i].lb_vendor != NULL) - printf("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part); + if(boards[i].working == OK) + printf(" good "); else - printf("(none, board is autodetected)\n"); - } + printf(" BAD! "); + + k = 1; + for (j = 0; b[j].vendor_name != NULL; j++) { + if ((strcmp(b[j].vendor_name, boards[i].vendor) == 0) && (strcmp(b[j].board_name, boards[i].name) == 0)){ + k = 0; + if (b[j].lb_vendor != NULL) + printf("-m %s:%s", b[j].lb_vendor, b[j].lb_part); + else + printf("(none, board is autodetected)"); + } + } + if (k) + printf(" -"); - print_supported_boards_helper(boards_ok, - "Supported boards which don't need write-enable code"); - print_supported_boards_helper(boards_bad, - "Boards which have been verified to NOT work yet"); - print_supported_boards_helper(laptops_ok, - "Laptops which have been verified to work"); - print_supported_boards_helper(laptops_bad, - "Laptops which have been verified to NOT work yet"); + printf("\n"); + } } #endif @@ -229,7 +216,8 @@ void print_supported(void) print_supported_chips(); #if INTERNAL_SUPPORT == 1 print_supported_chipsets(); - print_supported_boards(); + print_supported_boards_helper(boards_known, "boards"); + print_supported_boards_helper(laptops_known, "laptops"); #endif #if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1) printf("\nSupported PCI devices flashrom can use " @@ -256,183 +244,221 @@ void print_supported(void) #endif } - #if INTERNAL_SUPPORT == 1 /* Please keep this list alphabetically ordered by vendor/board. */ -const struct board_info boards_ok[] = { - /* Verified working boards that don't need write-enables. */ +const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) - { "Abit", "AX8", }, - { "Abit", "Fatal1ty F-I90HD", }, - { "Advantech", "PCM-5820", }, - { "ASI", "MB-5BLMP", }, - { "ASRock", "A770CrossFire", }, - { "ASRock", "K8S8X", }, - { "ASRock", "M3A790GXH/128M" }, - { "ASUS", "A7N8X Deluxe", }, - { "ASUS", "A7N8X-E Deluxe", }, - { "ASUS", "A7V133", }, - { "ASUS", "A7V400-MX", }, - { "ASUS", "A7V8X-MX", }, - { "ASUS", "A8N-E", }, - { "ASUS", "A8NE-FM/S", }, - { "ASUS", "A8N-SLI", }, - { "ASUS", "A8N-SLI Premium", }, - { "ASUS", "A8V Deluxe", }, - { "ASUS", "A8V-E Deluxe", }, - { "ASUS", "A8V-E SE", }, - { "ASUS", "K8V", }, - { "ASUS", "K8V SE Deluxe", }, - { "ASUS", "K8V-X SE", }, - { "ASUS", "M2A-MX", }, - { "ASUS", "M2A-VM", }, - { "ASUS", "M2N-E", }, - { "ASUS", "M2V", }, - { "ASUS", "M3A78-EM", }, - { "ASUS", "P2B", }, - { "ASUS", "P2B-D", }, - { "ASUS", "P2B-DS", }, - { "ASUS", "P2B-F", }, - { "ASUS", "P2L97-S", }, - { "ASUS", "P5B", }, - { "ASUS", "P5B-Deluxe", }, - { "ASUS", "P5KC", }, - { "ASUS", "P5L-MX", }, - { "ASUS", "P6T Deluxe", }, - { "ASUS", "P6T Deluxe V2", }, - { "A-Trend", "ATC-6220", }, - { "BCOM", "WinNET100", }, - { "DFI", "Blood-Iron P35 T2RL", }, - { "Elitegroup", "K7S5A", }, - { "Elitegroup", "P6VAP-A+", }, - { "GIGABYTE", "GA-2761GXDK", }, - { "GIGABYTE", "GA-6BXC", }, - { "GIGABYTE", "GA-6BXDU", }, - { "GIGABYTE", "GA-6ZMA", }, - { "GIGABYTE", "GA-7ZM", }, - { "GIGABYTE", "GA-965P-DS4", }, - { "GIGABYTE", "GA-EP35-DS3L", }, - { "GIGABYTE", "GA-EX58-UD4P", }, - { "GIGABYTE", "GA-M57SLI-S4", }, - { "GIGABYTE", "GA-M61P-S3", }, - { "GIGABYTE", "GA-MA69VM-S2", }, - { "GIGABYTE", "GA-MA770T-UD3P", }, - { "GIGABYTE", "GA-MA78G-DS3H", }, - { "GIGABYTE", "GA-MA78GM-S2H", }, - { "GIGABYTE", "GA-MA78GPM-DS2H", }, - { "GIGABYTE", "GA-MA790FX-DQ6", }, - { "GIGABYTE", "GA-MA790GP-DS4H", }, - { "Intel", "EP80759", }, - { "Jetway", "J7F4K1G5D-PB", }, - { "MSI", "MS-6153", }, - { "MSI", "MS-6156", }, - { "MSI", "MS-6330 (K7T Turbo)", }, - { "MSI", "MS-6570 (K7N2)", }, - { "MSI", "MS-7065", }, - { "MSI", "MS-7168 (Orion)", }, - { "MSI", "MS-7236 (945PL Neo3)", }, - { "MSI", "MS-7255 (P4M890M)", }, - { "MSI", "MS-7312 (K9MM-V)", }, - { "MSI", "MS-7345 (P35 Neo2-FIR)", }, - { "MSI", "MS-7368 (K9AG Neo2-Digital)", }, - { "MSI", "MS-7376 (K9A2 Platinum)", }, - { "NEC", "PowerMate 2000", }, - { "PC Engines", "Alix.1c", }, - { "PC Engines", "Alix.2c2", }, - { "PC Engines", "Alix.2c3", }, - { "PC Engines", "Alix.3c3", }, - { "PC Engines", "Alix.3d3", }, - { "PC Engines", "WRAP.2E", }, - { "RCA", "RM4100", }, - { "Shuttle", "FD37", }, - { "Sun", "Blade x6250", }, - { "Supermicro", "H8QC8", }, - { "Supermicro", "X8DTT-F", }, - { "Thomson", "IP1000", }, - { "TriGem", "Lomita", }, - { "T-Online", "S-100", }, - { "Tyan", "iS5375-1U", }, - { "Tyan", "S1846", }, - { "Tyan", "S2466", }, - { "Tyan", "S2881", }, - { "Tyan", "S2882", }, - { "Tyan", "S2882-D", }, - { "Tyan", "S2891", }, - { "Tyan", "S2892", }, - { "Tyan", "S2895", }, - { "Tyan", "S3095", }, - { "Tyan", "S5180", }, - { "Tyan", "S5191", }, - { "Tyan", "S5197", }, - { "Tyan", "S5211", }, - { "Tyan", "S5211-1U", }, - { "Tyan", "S5220", }, - { "Tyan", "S5375", }, - { "Tyan", "S5376G2NR/S5376WAG2NR", }, - { "Tyan", "S5377", }, - { "Tyan", "S5382 (Tempest i5000PW)", }, - { "Tyan", "S5397", }, - { "VIA", "EPIA-CN", }, - { "VIA", "EPIA-EX15000G", }, - { "VIA", "EPIA-LN", }, - { "VIA", "EPIA-M700", }, - { "VIA", "EPIA-NX15000G", }, - { "VIA", "EPIA-SP", }, - { "VIA", "NAB74X0", }, - { "VIA", "pc2500e", }, - { "VIA", "PC3500G", }, - { "VIA", "VB700X", }, -#endif - {}, -}; + BOARD_ENTRY( "A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL ), + BOARD_ENTRY( "Abit", "AX8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL ), + BOARD_ENTRY( "Abit", "Fatal1ty F-I90HD", OK, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NA…", NULL ), + BOARD_ENTRY( "Abit", "IP35", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL ), + BOARD_ENTRY( "Abit", "IP35 Pro", OK, "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL ), + BOARD_ENTRY( "Abit", "IS-10", NT, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL ), + BOARD_ENTRY( "Abit", "NF7-S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL ), + BOARD_ENTRY( "Abit", "VT6X4", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL ), + BOARD_ENTRY( "Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL ), + BOARD_ENTRY( "Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL ), + BOARD_ENTRY( "agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL ), + BOARD_ENTRY( "Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL ), /* FIXME */ + BOARD_ENTRY( "AOpen", "vKM400Am-S", OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL ), + BOARD_ENTRY( "Artec Group", "DBE61", OK, "http://wiki.thincan.org/DBE61", NULL ), + BOARD_ENTRY( "Artec Group", "DBE62", OK, "http://wiki.thincan.org/DBE62", NULL ), + BOARD_ENTRY( "ASI", "MB-5BLMP", OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client." ), + BOARD_ENTRY( "ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b", NULL ), + BOARD_ENTRY( "ASRock", "K7VT4A+", NT, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=", NULL ), + BOARD_ENTRY( "ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", "The Super I/O isn't found on this board. See http://www.flashrom.org/pipermail/flashrom/2009-November/000937.html." ), + BOARD_ENTRY( "ASRock", "P4i65GV", OK, NULL, NULL ), + BOARD_ENTRY( "ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/MB/overview.asp?Model=M3A790GXH/128M", NULL ), + BOARD_ENTRY( "ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL ), + BOARD_ENTRY( "ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL ), + BOARD_ENTRY( "ASUS", "A7V133", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL ), + BOARD_ENTRY( "ASUS", "A7V400-MX", OK, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL ), + BOARD_ENTRY( "ASUS", "A7V600-X", OK, "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k", NULL ), + BOARD_ENTRY( "ASUS", "A7V8X", OK, "http://www.asus.com/product.aspx?P_ID=qfpaGrAy2kLVo0f2", NULL ), + BOARD_ENTRY( "ASUS", "A7V8X-MX", OK, "http://www.asus.com/product.aspx?P_ID=SEJOOYqfuQPitx2H", NULL ), + BOARD_ENTRY( "ASUS", "A7V8X-MX SE", OK, "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ", NULL ), + BOARD_ENTRY( "ASUS", "A7V8X-X", OK, "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw", NULL ), + BOARD_ENTRY( "ASUS", "A8N-E", OK, "http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz", NULL ), + BOARD_ENTRY( "ASUS", "A8N-SLI", OK, "http://www.asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK", NULL ), + BOARD_ENTRY( "ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/product.aspx?P_ID=nbulqxniNmzf0mH1", NULL ), + BOARD_ENTRY( "ASUS", "A8NE-FM/S", OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL ), + BOARD_ENTRY( "ASUS", "A8V Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL ), + BOARD_ENTRY( "ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL ), + BOARD_ENTRY( "ASUS", "A8V-E SE", OK, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html." ), + BOARD_ENTRY( "ASUS", "K8V", OK, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL ), + BOARD_ENTRY( "ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o", NULL ), + BOARD_ENTRY( "ASUS", "K8V-X SE", OK, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL ), + BOARD_ENTRY( "ASUS", "M2A-MX", OK, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL ), + BOARD_ENTRY( "ASUS", "M2A-VM", OK, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html." ), + BOARD_ENTRY( "ASUS", "M2N-E", OK, "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html" ), + BOARD_ENTRY( "ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF", NULL ), + BOARD_ENTRY( "ASUS", "M2V", OK, "http://www.asus.com/product.aspx?P_ID=OqYlEDFfF6ZqZGvp", NULL ), + BOARD_ENTRY( "ASUS", "M2V-MX", OK, "http://www.asus.com/product.aspx?P_ID=7grf8Ci4yxnqzt3z", NULL ), + BOARD_ENTRY( "ASUS", "M3A78-EM", OK, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL ), + BOARD_ENTRY( "ASUS", "MEW-AM", NT, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", NULL ), + BOARD_ENTRY( "ASUS", "MEW-VM", NT, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", NULL ), + BOARD_ENTRY( "ASUS", "P2B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL ), + BOARD_ENTRY( "ASUS", "P2B-D", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL ), + BOARD_ENTRY( "ASUS", "P2B-DS", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL ), + BOARD_ENTRY( "ASUS", "P2B-F", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL ), + BOARD_ENTRY( "ASUS", "P2L97-S", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL ), + BOARD_ENTRY( "ASUS", "P3B-F", NT, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", NULL ), + BOARD_ENTRY( "ASUS", "P4B266", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL ), + BOARD_ENTRY( "ASUS", "P4B266-LM", OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL ), + BOARD_ENTRY( "ASUS", "P4C800-E Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL ), + BOARD_ENTRY( "ASUS", "P4P800-E Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL ), + BOARD_ENTRY( "ASUS", "P5A", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL ), + BOARD_ENTRY( "ASUS", "P5B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL ), + BOARD_ENTRY( "ASUS", "P5B-Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL ), + BOARD_ENTRY( "ASUS", "P5BV-M", NT, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", NULL ), + BOARD_ENTRY( "ASUS", "P5KC", OK, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL ), + BOARD_ENTRY( "ASUS", "P5L-MX", OK, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL ), + BOARD_ENTRY( "ASUS", "P5ND2-SLI Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL ), + BOARD_ENTRY( "ASUS", "P6T Deluxe", OK, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL ), + BOARD_ENTRY( "ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL ), + BOARD_ENTRY( "BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client." ), + BOARD_ENTRY( "Biostar", "M6TBA", NT, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", NULL ), + BOARD_ENTRY( "Biostar", "P4M80-M4", OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL ), + BOARD_ENTRY( "Boser", "HS-6637", NT, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", NULL ), + BOARD_ENTRY( "Dell", "PowerEdge 1850", OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL ), + BOARD_ENTRY( "DFI", "855GME-MGF", NT, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", NULL ), + BOARD_ENTRY( "DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL ), + BOARD_ENTRY( "Elitegroup", "K7S5A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL ), + BOARD_ENTRY( "Elitegroup", "K7S6A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL ), + BOARD_ENTRY( "Elitegroup", "K7VTA3", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL ), + BOARD_ENTRY( "Elitegroup", "P6VAP-A+", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL ), + BOARD_ENTRY( "EPoX", "EP-8K5A2", OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL ), + BOARD_ENTRY( "EPoX", "EP-8RDA3+", OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL ), + BOARD_ENTRY( "EPoX", "EP-BX3", OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL ), + BOARD_ENTRY( "FIC", "VA-502", NT, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-6ZMA", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-7VT600", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-7ZM", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option." ), + BOARD_ENTRY( "GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-MA69VM-S2", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-MA770T-UD3P", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-MA78G-DS3H", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), /* TODO: Rev 1.x or 2.x? */ + BOARD_ENTRY( "GIGABYTE", "GA-MA78GM-S2H", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), /* TODO: Rev. 1.0, 1.1, or 2.x? */ + BOARD_ENTRY( "GIGABYTE", "GA-MA78GPM-DS2H", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL ), + BOARD_ENTRY( "HP", "DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL ), + BOARD_ENTRY( "HP", "Vectra VL400 PC", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL ), + BOARD_ENTRY( "HP", "Vectra VL420 SFF PC", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL ), + BOARD_ENTRY( "IBM", "x3455", OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL ), + BOARD_ENTRY( "Intel", "D201GLY", OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL ), + BOARD_ENTRY( "Intel", "EP80759", OK, NULL, NULL ), + BOARD_ENTRY( "IWILL", "DK8-HTX", OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL ), + BOARD_ENTRY( "Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4…", NULL ), + BOARD_ENTRY( "Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL ), + BOARD_ENTRY( "Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL ), + BOARD_ENTRY( "MSI", "MS-6153", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=336", NULL ), + BOARD_ENTRY( "MSI", "MS-6156", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL ), + BOARD_ENTRY( "MSI", "MS-6178", NT, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=343", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot." ), + BOARD_ENTRY( "MSI", "MS-6330 (K7T Turbo)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=327", NULL ), + BOARD_ENTRY( "MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=519", NULL ), + BOARD_ENTRY( "MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=502", NULL ), + BOARD_ENTRY( "MSI", "MS-6702E (K8T Neo2-F)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=588", NULL ), + BOARD_ENTRY( "MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=505", NULL ), + BOARD_ENTRY( "MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=559", NULL ), + BOARD_ENTRY( "MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL ), + BOARD_ENTRY( "MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL ), + BOARD_ENTRY( "MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170", NULL ), + BOARD_ENTRY( "MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL ), + BOARD_ENTRY( "MSI", "MS-7236 (945PL Neo3)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173", NULL ), + BOARD_ENTRY( "MSI", "MS-7255 (P4M890M)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1082", NULL ), + BOARD_ENTRY( "MSI", "MS-7260 (K9N Neo)", NT, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=255", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot." ), + BOARD_ENTRY( "MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1104", NULL ), + BOARD_ENTRY( "MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1261", NULL ), + BOARD_ENTRY( "MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1241", NULL ), + BOARD_ENTRY( "MSI", "MS-7376 (K9A2 Platinum)", OK, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1332", NULL ), + BOARD_ENTRY( "NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL ), + BOARD_ENTRY( "Nokia", "IP530", OK, NULL, NULL ), + BOARD_ENTRY( "PC Engines", "Alix.1c", OK, "http://pcengines.ch/alix1c.htm", NULL ), + BOARD_ENTRY( "PC Engines", "Alix.2c2", OK, "http://pcengines.ch/alix2c2.htm", NULL ), + BOARD_ENTRY( "PC Engines", "Alix.2c3", OK, "http://pcengines.ch/alix2c3.htm", NULL ), + BOARD_ENTRY( "PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL ), + BOARD_ENTRY( "PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL ), + BOARD_ENTRY( "PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL ), + BOARD_ENTRY( "RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL ), + BOARD_ENTRY( "Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL ), + BOARD_ENTRY( "Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL ), + BOARD_ENTRY( "Shuttle", "FD37", OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL ), + BOARD_ENTRY( "Shuttle", "FN25", OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL ), + BOARD_ENTRY( "Soyo", "SY-5VD", NT, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", NULL ), + BOARD_ENTRY( "Soyo", "SY-7VCA", OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL ), + BOARD_ENTRY( "Sun", "Blade x6250", OK, "http://www.sun.com/servers/blades/x6250/", NULL ), + BOARD_ENTRY( "Sun", "Fire x4150", NT, "http://www.sun.com/servers/x64/x4150/", NULL ), + BOARD_ENTRY( "Sun", "Fire x4200", NT, "http://www.sun.com/servers/entry/x4200/", NULL ), + BOARD_ENTRY( "Sun", "Fire x4540", NT, "http://www.sun.com/servers/x64/x4540/", NULL ), + BOARD_ENTRY( "Sun", "Fire x4600", NT, "http://www.sun.com/servers/x64/x4600/", NULL ), + BOARD_ENTRY( "Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL ), + BOARD_ENTRY( "Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL ), + BOARD_ENTRY( "T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL ), + BOARD_ENTRY( "Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL ), + BOARD_ENTRY( "Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL ), + BOARD_ENTRY( "Thomson", "IP1000", OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL ), + BOARD_ENTRY( "TriGem", "Lomita", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL ), + BOARD_ENTRY( "Tyan", "iS5375-1U", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL ), + BOARD_ENTRY( "Tyan", "S1846", OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL ), + BOARD_ENTRY( "Tyan", "S2466", OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL ), + BOARD_ENTRY( "Tyan", "S2498 (Tomcat K7M)", OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL ), + BOARD_ENTRY( "Tyan", "S2881", OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL ), + BOARD_ENTRY( "Tyan", "S2882", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL ), + BOARD_ENTRY( "Tyan", "S2882-D", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL ), + BOARD_ENTRY( "Tyan", "S2891", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL ), + BOARD_ENTRY( "Tyan", "S2892", OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL ), + BOARD_ENTRY( "Tyan", "S2895", OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL ), + BOARD_ENTRY( "Tyan", "S3095", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL ), + BOARD_ENTRY( "Tyan", "S5180", OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL ), + BOARD_ENTRY( "Tyan", "S5191", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL ), + BOARD_ENTRY( "Tyan", "S5197", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL ), + BOARD_ENTRY( "Tyan", "S5211", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL ), + BOARD_ENTRY( "Tyan", "S5211-1U", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL ), + BOARD_ENTRY( "Tyan", "S5220", OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL ), + BOARD_ENTRY( "Tyan", "S5375", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL ), + BOARD_ENTRY( "Tyan", "S5376G2NR/S5376WAG2NR", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", NULL ), + BOARD_ENTRY( "Tyan", "S5377", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL ), + BOARD_ENTRY( "Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL ), + BOARD_ENTRY( "Tyan", "S5397", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL ), + BOARD_ENTRY( "VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL ), /* EPIA-MII link for now */ + BOARD_ENTRY( "VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL ), + BOARD_ENTRY( "VIA", "EPIA-CN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL ), + BOARD_ENTRY( "VIA", "EPIA-EX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL ), + BOARD_ENTRY( "VIA", "EPIA-LN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL ), + BOARD_ENTRY( "VIA", "EPIA-M700", OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL ), + BOARD_ENTRY( "VIA", "EPIA-N/NL", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL ), /* EPIA-N link for now */ + BOARD_ENTRY( "VIA", "EPIA-NX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL ), + BOARD_ENTRY( "VIA", "NAB74X0", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL ), + BOARD_ENTRY( "VIA", "pc2500e", OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL ), + BOARD_ENTRY( "VIA", "PC3500G", OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL ), + BOARD_ENTRY( "VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL ), +#endif /* defined(__i386__) || defined(__x86_64__) */ -/* Please keep this list alphabetically ordered by vendor/board. */ -const struct board_info boards_bad[] = { - /* Verified non-working boards (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "Abit", "IS-10", }, - { "ASRock", "K7VT4A+", }, - { "ASUS", "MEW-AM", }, - { "ASUS", "MEW-VM", }, - { "ASUS", "P3B-F", }, - { "ASUS", "P5BV-M", }, - { "Biostar", "M6TBA", }, - { "Boser", "HS-6637", }, - { "DFI", "855GME-MGF", }, - { "FIC", "VA-502", }, - { "MSI", "MS-6178", }, - { "MSI", "MS-7260 (K9N Neo)", }, - { "Soyo", "SY-5VD", }, - { "Sun", "Fire x4150", }, - { "Sun", "Fire x4200", }, - { "Sun", "Fire x4540", }, - { "Sun", "Fire x4600", }, -#endif {}, }; /* Please keep this list alphabetically ordered by vendor/board. */ -const struct board_info laptops_ok[] = { - /* Verified working laptops. */ +const struct board_info laptops_known[] = { #if defined(__i386__) || defined(__x86_64__) - { "Lenovo", "3000 V100 TF05Cxx", }, - { "Acer", "Aspire 1520", }, -#endif - {}, -}; + BOARD_ENTRY( "Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL ), + BOARD_ENTRY( "Acer", "Aspire One", NT, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html" ), + BOARD_ENTRY( "ASUS", "Eee PC 701 4G", NT, "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB331NT )." ), + BOARD_ENTRY( "Dell", "Latitude CPi A366XT", NT, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop." ), + BOARD_ENTRY( "HP/Compaq", "nx9010", NT, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)." ), + BOARD_ENTRY( "IBM/Lenovo", "Thinkpad T40p", NT, "http://www.thinkwiki.org/wiki/Category:T40p", NULL ), + BOARD_ENTRY( "IBM/Lenovo", "240", NT, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later." ), + BOARD_ENTRY( "Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL ), +#endif /* defined(__i386__) || defined(__x86_64__) */ -/* Please keep this list alphabetically ordered by vendor/board. */ -const struct board_info laptops_bad[] = { - /* Verified non-working laptops (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "Acer", "Aspire One", }, - { "ASUS", "Eee PC 701 4G", }, - { "Dell", "Latitude CPi A366XT", }, - { "HP/Compaq", "nx9010", }, - { "IBM/Lenovo", "Thinkpad T40p", }, - { "IBM/Lenovo", "240", }, -#endif {}, }; -#endif - +#endif /* INTERNAL_SUPPORT == 1 */ diff --git a/print_wiki.c b/print_wiki.c index 3d51bfa..cb90919 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -25,20 +25,6 @@ #include "flash.h" #include "flashchips.h" -#if INTERNAL_SUPPORT == 1 -struct board_info_url { - const char *vendor; - const char *name; - const char *url; -}; - -struct board_info_notes { - const char *vendor; - const char *name; - const char *note; -}; -#endif - const char *wiki_header = "= Supported devices =\n\n\ <div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \ background-color:#eeeeee; align:right; border:1px solid #aabbcc;\"><small>\n\ @@ -56,11 +42,6 @@ const char *board_th = "{| border=\"0\" style=\"font-size: smaller\" \ valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\ ! align=\"left\" | Mainboard\n! align=\"left\" | Status\n\n"; -const char *board_th2 = "{| border=\"0\" style=\"font-size: smaller\" \ -valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\ -! align=\"left\" | Mainboard\n! align=\"left\" | Required option\n\ -! align=\"left\" | Status\n\n"; - const char *board_intro = "\ \n== Supported mainboards ==\n\n\ In general, it is very likely that flashrom works out of the box even if your \ @@ -101,292 +82,6 @@ background-color:#ff6666; align:right; border:1px solid #000000;\">\n\ untested laptops unless you have a means to recover from a flashing that goes \ wrong (a working backup flash chip and/or good soldering skills).\n</div>\n"; -/* Please keep these lists alphabetically ordered by vendor/board. */ -const struct board_info_url boards_url[] = { - /* Verified working boards that don't need write-enables. */ -#if defined(__i386__) || defined(__x86_64__) - { "Abit", "AX8", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…" }, - { "Abit", "Fatal1ty F-I90HD", "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NA…" }, - { "Advantech", "PCM-5820", "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm" }, - { "ASI", "MB-5BLMP", "http://www.hojerteknik.com/winnet.htm" }, - { "ASRock", "A770CrossFire", "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b" }, - { "ASRock", "K8S8X", "http://www.asrock.com/mb/overview.asp?Model=K8S8X" }, - { "ASRock", "M3A790GXH/128M" "http://www.asrock.com/MB/overview.asp?Model=M3A790GXH/128M" }, - { "ASUS", "A7N8X Deluxe", "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC" }, - { "ASUS", "A7N8X-E Deluxe", "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2" }, - { "ASUS", "A7V133", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/" }, - { "ASUS", "A7V400-MX", "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx" }, - { "ASUS", "A7V8X-MX", "http://www.asus.com/product.aspx?P_ID=SEJOOYqfuQPitx2H" }, - { "ASUS", "A8N-E", "http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz" }, - { "ASUS", "A8NE-FM/S", "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…" }, - { "ASUS", "A8N-SLI", "http://www.asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK" }, - { "ASUS", "A8N-SLI Premium", "http://www.asus.com/product.aspx?P_ID=nbulqxniNmzf0mH1" }, - { "ASUS", "A8V Deluxe", "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU" }, - { "ASUS", "A8V-E Deluxe", "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh" }, - { "ASUS", "A8V-E SE", "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi" }, - { "ASUS", "K8V", "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm" }, - { "ASUS", "K8V SE Deluxe", "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o" }, - { "ASUS", "K8V-X SE", "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr" }, - { "ASUS", "M2A-MX", "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ" }, - { "ASUS", "M2A-VM", "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS" }, - { "ASUS", "M2N-E", "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9" }, - { "ASUS", "M2V", "http://www.asus.com/product.aspx?P_ID=OqYlEDFfF6ZqZGvp" }, - { "ASUS", "M3A78-EM", "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D" }, - { "ASUS", "P2B", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/" }, - { "ASUS", "P2B-D", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/" }, - { "ASUS", "P2B-DS", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/" }, - { "ASUS", "P2B-F", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/" }, - { "ASUS", "P2L97-S", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/" }, - { "ASUS", "P5B", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/" }, - { "ASUS", "P5B-Deluxe", "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa" }, - { "ASUS", "P5KC", "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj" }, - { "ASUS", "P5L-MX", "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH" }, - { "ASUS", "P6T Deluxe", "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ" }, - { "ASUS", "P6T Deluxe V2", "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx" }, - { "A-Trend", "ATC-6220", "http://www.motherboard.cz/mb/atrend/atc6220.htm" }, - { "BCOM", "WinNET100", "http://www.coreboot.org/BCOM_WINNET100" }, - { "DFI", "Blood-Iron P35 T2RL", "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…" }, - { "Elitegroup", "K7S5A", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…" }, - { "Elitegroup", "P6VAP-A+", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…" }, - { "GIGABYTE", "GA-6BXC", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-6BXDU", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-6ZMA", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-965P-DS4", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-EX58-UD4P", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-EP35-DS3L", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-MA69VM-S2", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-MA790GP-DS4H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-MA78GPM-DS2H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-MA770T-UD3P", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "Intel", "EP80759", NULL }, - { "Jetway", "J7F4K1G5D-PB", "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4…" }, - { "MSI", "MS-6153", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=336" }, - { "MSI", "MS-6156", "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…" }, - { "MSI", "MS-6330 (K7T Turbo)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=327" }, - { "MSI", "MS-6570 (K7N2)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=519" }, - { "MSI", "MS-7065", "http://browse.geekbench.ca/geekbench2/view/53114" }, - { "MSI", "MS-7168 (Orion)", "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…" }, - { "MSI", "MS-7236 (945PL Neo3)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173" }, - { "MSI", "MS-7255 (P4M890M)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1082" }, - { "MSI", "MS-7345 (P35 Neo2-FIR)","http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1261" }, - { "MSI", "MS-7312 (K9MM-V)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1104" }, - { "MSI", "MS-7368 (K9AG Neo2-Digital)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1241" }, - { "MSI", "MS-7376 (K9A2 Platinum)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1332" }, - { "NEC", "PowerMate 2000", "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/" }, - { "PC Engines", "Alix.1c", "http://pcengines.ch/alix1c.htm" }, - { "PC Engines", "Alix.2c2", "http://pcengines.ch/alix2c2.htm" }, - { "PC Engines", "Alix.2c3", "http://pcengines.ch/alix2c3.htm" }, - { "PC Engines", "Alix.3c3", "http://pcengines.ch/alix3c3.htm" }, - { "PC Engines", "Alix.3d3", "http://pcengines.ch/alix3d3.htm" }, - { "PC Engines", "WRAP.2E", "http://pcengines.ch/wrap2e1.htm" }, - { "RCA", "RM4100", "http://www.settoplinux.org/index.php?title=RCA_RM4100" }, - { "Shuttle", "FD37", "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/" }, - { "Sun", "Blade x6250", "http://www.sun.com/servers/blades/x6250/" }, - { "Supermicro", "H8QC8", "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm" }, - { "Supermicro", "X8DTT-F", "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm" }, - { "Tekram", "P6Pro-A5", "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm" }, - { "Thomson", "IP1000", "http://www.settoplinux.org/index.php?title=Thomson_IP1000" }, - { "TriGem", "Lomita", "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml" }, - { "T-Online", "S-100", "http://wiki.freifunk-hannover.de/T-Online_S_100" }, - { "Tyan", "iS5375-1U", "http://www.tyan.com/product_board_detail.aspx?pid=610" }, - { "Tyan", "S1846", "http://www.tyan.com/archive/products/html/tsunamiatx.html" }, - { "Tyan", "S2466", "http://www.tyan.com/product_board_detail.aspx?pid=461" }, - { "Tyan", "S2881", "http://www.tyan.com/product_board_detail.aspx?pid=115" }, - { "Tyan", "S2882", "http://www.tyan.com/product_board_detail.aspx?pid=121" }, - { "Tyan", "S2882-D", "http://www.tyan.com/product_board_detail.aspx?pid=127" }, - { "Tyan", "S2891", "http://www.tyan.com/product_board_detail.aspx?pid=144" }, - { "Tyan", "S2892", "http://www.tyan.com/product_board_detail.aspx?pid=145" }, - { "Tyan", "S2895", "http://www.tyan.com/archive/products/html/thunderk8we.html" }, - { "Tyan", "S3095", "http://www.tyan.com/product_board_detail.aspx?pid=181" }, - { "Tyan", "S5180", "http://www.tyan.com/product_board_detail.aspx?pid=456" }, - { "Tyan", "S5191", "http://www.tyan.com/product_board_detail.aspx?pid=343" }, - { "Tyan", "S5197", "http://www.tyan.com/product_board_detail.aspx?pid=349" }, - { "Tyan", "S5211", "http://www.tyan.com/product_board_detail.aspx?pid=591" }, - { "Tyan", "S5211-1U", "http://www.tyan.com/product_board_detail.aspx?pid=593" }, - { "Tyan", "S5220", "http://www.tyan.com/product_board_detail.aspx?pid=597" }, - { "Tyan", "S5375", "http://www.tyan.com/product_board_detail.aspx?pid=566" }, - { "Tyan", "S5376G2NR/S5376WAG2NR","http://www.tyan.com/product_board_detail.aspx?pid=605" }, - { "Tyan", "S5377", "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…" }, - { "Tyan", "S5382 (Tempest i5000PW)", "http://www.tyan.com/product_board_detail.aspx?pid=439" }, - { "Tyan", "S5397", "http://www.tyan.com/product_board_detail.aspx?pid=560" }, - { "VIA", "EPIA-EX15000G", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…" }, - { "VIA", "EPIA-LN", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…" }, - { "VIA", "EPIA-M700", "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…" }, - { "VIA", "EPIA-NX15000G", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…" }, - { "VIA", "NAB74X0", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…" }, - { "VIA", "pc2500e", "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp" }, - { "VIA", "VB700X", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…" }, - - /* Verified working boards that DO need write-enables. */ - { "Abit", "VT6X4", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…" }, - { "Abit", "IP35", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…" }, - { "Abit", "IP35 Pro", "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?fMTYPE=LG…" }, - { "Abit", "NF7-S", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…"}, - { "Acorp", "6A815EPD", "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…" }, - { "agami", "Aruma", "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…" }, - { "Albatron", "PM266A Pro", "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…" }, /* FIXME */ - { "AOpen", "vKM400Am-S", "http://usa.aopen.com/products_detail.aspx?Auno=824" }, - { "Artec Group", "DBE61", "http://wiki.thincan.org/DBE61" }, - { "Artec Group", "DBE62", "http://wiki.thincan.org/DBE62" }, - { "ASUS", "A7V600-X", "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k" }, - { "ASUS", "A7V8X", "http://www.asus.com/product.aspx?P_ID=qfpaGrAy2kLVo0f2" }, - { "ASUS", "A7V8X-MX SE", "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ" }, - { "ASUS", "A7V8X-X", "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw" }, - { "ASUS", "M2NBP-VM CSM", "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF" }, - { "ASUS", "M2V-MX", "http://www.asus.com/product.aspx?P_ID=7grf8Ci4yxnqzt3z" }, - { "ASUS", "P4B266", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/" }, - { "ASUS", "P4C800-E Deluxe", "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK" }, - { "ASUS", "P4B266-LM", "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650" }, - { "ASUS", "P4P800-E Deluxe", "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g" }, - { "ASUS", "P5ND2-SLI Deluxe", "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5" }, - { "ASUS", "P5A", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/" }, - { "Biostar", "P4M80-M4", "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4" }, - { "Dell", "PowerEdge 1850", "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm" }, - { "Elitegroup", "K7S6A", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…" }, - { "Elitegroup", "K7VTA3", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…" }, - { "EPoX", "EP-8K5A2", "http://www.epox.com/product.asp?ID=EP-8K5A2" }, - { "EPoX", "EP-8RDA3+", "http://www.epox.com/product.asp?ID=EP-8RDA3plus" }, - { "EPoX", "EP-BX3", "http://www.epox.com/product.asp?ID=EP-BX3" }, - { "GIGABYTE", "GA-2761GXDK", "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…" }, - { "GIGABYTE", "GA-7VT600", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-7ZM", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-K8N-SLI", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-M57SLI-S4", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-M61P-S3", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "GIGABYTE", "GA-MA78G-DS3H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, /* TODO: Rev 1.x or 2.x? */ - { "GIGABYTE", "GA-MA78GM-S2H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, /* TODO: Rev. 1.0, 1.1, or 2.x? */ - { "GIGABYTE", "GA-MA790FX-DQ6", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, - { "HP", "DL145 G3", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…" }, - { "HP", "Vectra VL400 PC", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…" }, - { "HP", "Vectra VL420 SFF PC", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…" }, - { "IBM", "x3455", "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html" }, - { "Intel", "D201GLY", "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm" }, - { "IWILL", "DK8-HTX", "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…" }, - { "Kontron", "986LCD-M", "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…" }, - { "Mitac", "6513WU", "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…" }, - { "MSI", "MS-6590 (KT4 Ultra)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=502" }, - { "MSI", "MS-6702E (K8T Neo2-F)","http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=588" }, - { "MSI", "MS-6712 (KT4V)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=505" }, - { "MSI", "MS-7005 (651M-L)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=559" }, - { "MSI", "MS-7046", "http://www.heimir.de/ms7046/" }, - { "MSI", "MS-7135 (K8N Neo3)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170" }, - { "Shuttle", "AK31", "http://www.motherboard.cz/mb/shuttle/AK31.htm" }, - { "Shuttle", "AK38N", "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/" }, - { "Shuttle", "FN25", "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=" }, - { "Soyo", "SY-7VCA", "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html" }, - { "Tyan", "S2498 (Tomcat K7M)", "http://www.tyan.com/archive/products/html/tomcatk7m.html" }, - { "VIA", "EPIA-CN", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…" }, - { "VIA", "EPIA M/MII/...", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…" }, /* EPIA-MII link for now */ - { "VIA", "EPIA-N/NL", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…" }, /* EPIA-N link for now */ - { "VIA", "EPIA SP", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…" }, - { "VIA", "PC3500G", "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp" }, -#endif - - /* Verified non-working boards (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "Abit", "IS-10", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…" }, - { "ASRock", "K7VT4A+", "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=" }, - { "ASUS", "MEW-AM", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/" }, - { "ASUS", "MEW-VM", "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm" }, - { "ASUS", "P3B-F", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/" }, - { "ASUS", "P5BV-M", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/" }, - { "Biostar", "M6TBA", "ftp://ftp.biostar-usa.com/manuals/M6TBA/" }, - { "Boser", "HS-6637", "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf" }, - { "DFI", "855GME-MGF", "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…" }, - { "FIC", "VA-502", "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/" }, - { "MSI", "MS-6178", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=343" }, - { "MSI", "MS-7260 (K9N Neo)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=255" }, - { "Soyo", "SY-5VD", "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English" }, - { "Sun", "Fire x4540", "http://www.sun.com/servers/x64/x4540/" }, - { "Sun", "Fire x4150", "http://www.sun.com/servers/x64/x4150/" }, - { "Sun", "Fire x4200", "http://www.sun.com/servers/entry/x4200/" }, - { "Sun", "Fire x4600", "http://www.sun.com/servers/x64/x4600/" }, -#endif - - /* Verified working laptops. */ -#if defined(__i386__) || defined(__x86_64__) - { "Acer", "Aspire 1520", "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…" }, - { "Lenovo", "3000 V100 TF05Cxx", "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…" }, -#endif - - /* Verified non-working laptops (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "Acer", "Aspire One", NULL }, - { "ASUS", "Eee PC 701 4G", "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS" }, - { "Dell", "Latitude CPi A366XT", "http://www.coreboot.org/Dell_Latitude_CPi_A366XT" }, - { "HP/Compaq", "nx9010", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…" }, - { "IBM/Lenovo", "Thinkpad T40p", "http://www.thinkwiki.org/wiki/Category:T40p" }, - { "IBM/Lenovo", "240", "http://www.stanford.edu/~bresnan//tp240.html" }, -#endif - - { NULL, NULL, 0 }, -}; - -/* Please keep these lists alphabetically ordered by vendor/board. */ -const struct board_info_notes boards_notes[] = { - /* Verified working boards that don't need write-enables. */ -#if defined(__i386__) || defined(__x86_64__) - { "ASI", "MB-5BLMP", "Used in the IGEL WinNET III thin client." }, - { "ASRock", "K8S8X", "The Super I/O isn't found on this board. See http://www.flashrom.org/pipermail/flashrom/2009-November/000937.html." }, - { "ASUS", "A8V-E SE", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html." }, - { "ASUS", "M2A-VM", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html." }, - { "BCOM", "WinNET100", "Used in the IGEL-316 thin client." }, - { "GIGABYTE", "GA-7ZM", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option." }, - { "ASUS", "M2N-E", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html" }, -#endif - - /* Verified working boards that DO need write-enables. */ -#if defined(__i386__) || defined(__x86_64__) - { "Acer", "Aspire One", "See http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html." }, -#endif - - /* Verified non-working boards (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "MSI", "MS-6178", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot." }, - { "MSI", "MS-7260 (K9N Neo)", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot." }, -#endif - - /* Verified working laptops. */ - /* None which need comments, yet... */ - - /* Verified non-working laptops (for now). */ -#if defined(__i386__) || defined(__x86_64__) - { "Acer", "Aspire One", "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html" }, - { "ASUS", "Eee PC 701 4G", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)." }, - { "Dell", "Latitude CPi A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop." }, - { "HP/Compaq", "nx9010", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)." }, - { "IBM/Lenovo", "Thinkpad T40p", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later." }, -#endif - - { NULL, NULL, 0 }, -}; - -static int url(const char *vendor, const char *board) -{ - int i; - const struct board_info_url *b = boards_url; - - for (i = 0; b[i].vendor != NULL; i++) { - if (!strcmp(vendor, b[i].vendor) && !strcmp(board, b[i].name)) - return i; - } - - return -1; -} - -static int note(const char *vendor, const char *board) -{ - int i; - const struct board_info_notes *n = boards_notes; - - for (i = 0; n[i].vendor != NULL; i++) { - if (!strcmp(vendor, n[i].vendor) && !strcmp(board, n[i].name)) - return i; - } - - return -1; -} - static void print_supported_chipsets_wiki(int cols) { int i, j, enablescount = 0, color = 1; @@ -421,40 +116,49 @@ static void print_supported_chipsets_wiki(int cols) printf("\n|}\n\n|}\n"); } -static void wiki_helper(const char *heading, const char *status, - int cols, const struct board_info boards[]) +static void wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) { - int i, j, k, c, boardcount = 0, color = 1, num_notes = 0; - const struct board_info *b; - const struct board_info_url *u = boards_url; + int i, j, k = 0, boardcount = 0, color = 1, num_notes = 0; char *notes = calloc(1, 1); char tmp[900 + 1]; + struct board_pciid_enable *b = board_pciid_enables; + - for (b = boards; b->vendor != NULL; b++) + for (i = 0; boards[i].vendor != NULL; i++) boardcount++; - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" + printf("\n\nTotal amount of known %s: '''%d'''\n\n" "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s", - heading, boardcount, board_th); + devicetype, boardcount, board_th); + + for (i = 0, j = 0; boards[i].vendor != NULL; i++, j++) { - for (i = 0, j = 0, b = boards; b[i].vendor != NULL; i++, j++) { /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(b[i].vendor, b[i - 1].vendor)) + if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor)) color = !color; - k = url(b[i].vendor, b[i].name); - c = note(b[i].vendor, b[i].name); - - printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s ||" - " {{%s}}", (color) ? "eeeeee" : "dddddd", b[i].vendor, - (k != -1 && u[k].url) ? "[" : "", - (k != -1 && u[k].url) ? u[k].url : "", - b[i].name, (k != -1 && u[k].url) ? "]" : "", status); + k = 0; + while ((b[k].vendor_name != NULL) && (strcmp(b[k].vendor_name, boards[i].vendor) != 0) && (strcmp(b[k].board_name, boards[i].name) != 0)){ + k++; + } - if (c != -1) { + printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s || %s%s%s%s || {{%s}}\n", + (color) ? "eeeeee" : "dddddd", + boards[i].vendor, + boards[i].url ? "[" : "", + boards[i].url ? boards[i].url : "", + boards[i].name, + boards[i].url ? "]" : "", + b[k].lb_vendor ? "-m " : "—", + b[k].lb_vendor ? b[k].lb_vendor : "", + b[k].lb_vendor ? ":" : "", + b[k].lb_vendor ? b[k].lb_part : "", + (boards[i].working == OK) ? "OK" : "No"); + + if (boards[i].note){ printf("<sup>%d</sup>\n", num_notes + 1); snprintf((char *)&tmp, 900, "<sup>%d</sup> %s<br />\n", - 1 + num_notes++, boards_notes[c].note); + 1 + num_notes++, boards[i].note); notes = strcat_realloc(notes, (char *)&tmp); } else { printf("\n"); @@ -474,58 +178,14 @@ static void wiki_helper(const char *heading, const char *status, free(notes); } -static void wiki_helper2(const char *heading, int cols) -{ - int i, j, k, boardcount = 0, color = 1; - struct board_pciid_enable *b; - const struct board_info_url *u = boards_url; - - for (b = board_pciid_enables; b->vendor_name != NULL; b++) - boardcount++; - - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n" - "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s", - heading, boardcount, board_th2); - - b = board_pciid_enables; - for (i = 0, j = 0; b[i].vendor_name != NULL; i++, j++) { - /* Alternate colors if the vendor changes. */ - if (i > 0 && strcmp(b[i].vendor_name, b[i - 1].vendor_name)) - color = !color; - - k = url(b[i].vendor_name, b[i].board_name); - - printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s " - "|| %s%s%s%s || {{%s}}\n", (color) ? "eeeeee" : "dddddd", - b[i].vendor_name, (k != -1 && u[k].url) ? "[" : "", - (k != -1 && u[k].url) ? u[k].url : "", b[i].board_name, - (k != -1 && u[k].url) ? "]" : "", - (b[i].lb_vendor) ? "-m " : "—", - (b[i].lb_vendor) ? b[i].lb_vendor : "", - (b[i].lb_vendor) ? ":" : "", - (b[i].lb_vendor) ? b[i].lb_part : "", - (b[i].status == OK) ? "OK" : "?3"); - - /* Split table in 'cols' columns. */ - if (j >= (boardcount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th2); - j = 0; - } - } - - printf("\n|}\n\n|}\n"); -} - static void print_supported_boards_wiki(void) { printf("%s", board_intro); - wiki_helper("Known good (worked out of the box)", "OK", 3, boards_ok); - wiki_helper2("Known good (with write-enable code in flashrom)", 2); - wiki_helper("Not supported (yet)", "No", 3, boards_bad); + wiki_helper("boards", 3, boards_known); printf("%s", laptop_intro); - wiki_helper("Known good (worked out of the box)", "OK", 1, laptops_ok); - wiki_helper("Not supported (yet)", "No", 1, laptops_bad); + wiki_helper("laptops", 1, laptops_known); + } #endif -- 1.6.6.1

4 8

Re: [flashrom] [PATCH 2/2] Add URL/note for HP xw9400
by Carl-Daniel Hailfinger 07 Jun '10

07 Jun '10

On 30.05.2010 19:43, Michael Karcher wrote: > Not ready for commit because of the pending list refactoring. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > This was committed with some changes as part of r1025. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

Re: [flashrom] [PATCH 1/2] Add hp xw9400 board enable.
by Carl-Daniel Hailfinger 07 Jun '10

07 Jun '10

On 30.05.2010 19:42, Michael Karcher wrote: > Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on > the same board, like on the Tyan S2915-E. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > This was committed in r1025. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

HP Pavilion a250n desktop
by Brynet 07 Jun '10

07 Jun '10

Hi, I have an HP Pavilion desktop, it's a P4 system based around the ICH5/ICH5R, with a 512KB/4Mbit Winbond W39V040FA. My primary OS is OpenBSD, so I obtained a flashrom livecd apparently based around debian. http://www.flashrom.org/Live_CD It has an older version of flashrom, 0.9.1-r803, but it appears recent enough. Looking for a BIOS update I found that HP only has a Windows binary, so I preceeded to analyse it, 7zip appears to successfull extract a ROM file along with some other Windows-only files, the rom file appears to be the same size as one read out using flashrom, which is verified. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-22… Attached are some logs are directed by #flashrom on freenode. The error during write is as transcribed below: "Flash image appears to be a legacy BIOS. Disabling Checks." "Writing flash chip.. ERASE FAIL at 0x0000fc18! Expected=0xff," "Read=0x2c, failed byte count from 0x00000000-0007ffff: 0x60d5a" "ERASE FAILED! (new-line) ERASED FAILED! (new-line) FAILED!" It then warns me that the flash is in an unknown state, and to not reboot the machine, it does appear that no damage was caused, a secondary dump matches the original firmware. Hope that's helpful, -Bryan. flashrom v0.9.1-r803 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 859M loops per second, 100 myus = 201 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xda, id2 0x34 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xda, id2 0x34 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Intel 28F001BX-T, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xda, id2 0x34 Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xda, id2 0x34 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xda, id2 0x34 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xda, id2 0x34 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xda, id2 0x34 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc4, id2 0x4e Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc4, id2 0x4e Probing for PMC Pm39LV010, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x34 Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x34 Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xc4, id2 0x4e Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for TI TMS29F002RB, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for TI TMS29F002RT, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xda, id2 0x34 Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xda, id2 0x34 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x34 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M] Capabilities: [e4] Vendor Specific Information <?> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00 10: 08 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a5 80 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 54 00 40 80 1c 00 00 00 00 00 00 00 00 00 60: 08 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 01 00 00 33 33 00 00 00 00 00 00 0a 38 00 a0: 02 00 30 00 17 42 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 3f 00 00 00 00 00 00 00 20 10 00 00 c0: 00 00 00 00 00 0e 0e 24 00 00 00 00 00 00 00 00 d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 20 01 e0: 00 00 00 00 09 00 06 01 00 02 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard [1043:80a5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fe780000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at ec00 [size=8] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: intelfb 00: 86 80 72 25 07 00 90 00 02 00 00 03 00 00 00 00 10: 08 00 00 f0 00 00 78 fe 01 ec 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a5 80 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 e0 23 e0 11 00 00 00 00 00 00 00 00 50: 00 00 54 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 01 02 ff 00 00 00 71 22 10 20 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 08 04 41 00 30 08 04 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 0e 0e 24 00 00 00 00 00 00 00 00 d0: 01 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 2a 00 00 00 09 00 06 01 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 dc 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e0 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e8 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fe77bc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 bc 77 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 80 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 3f 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 80 00 00 88 83 40 00 66 0f 04 00 06 14 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe500000-fe5fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 b0 b0 80 22 20: 50 fe 50 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 51 35 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 01 00 50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00 60: 8a 87 85 83 d0 00 00 00 80 80 80 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 01 00 00 00 0d 00 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00 e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45 f0: 00 00 44 00 04 00 00 00 66 0f 04 3e 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00: 86 80 db 24 07 00 80 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fc 00 00 00 00 00 10 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 07 a3 03 a3 00 00 00 00 05 00 02 02 00 00 00 00 50: 00 00 00 00 31 00 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: I/O ports at d400 [size=64] Region 2: Memory at fe77b800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at fe77b400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00 10: 01 d8 00 00 01 d4 00 00 00 b8 77 fe 00 b4 77 fe 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 95 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 02 00 00 40: 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 04 00 00 00 00 00 01:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:80b3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at b800 [size=256] Region 1: Memory at fe5ff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 00: ec 10 39 81 07 01 90 02 10 00 00 02 00 40 00 00 10: 01 b8 00 00 00 f4 5f fe 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 b3 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 superiotool r4931 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0x0000, rev=0x00 Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x6001, rev=0x1 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x6001, rev=0x1 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x6001, rev=0x1 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x6001, rev=0x1 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Found SMSC LPC47M15x/192/997 (id=0x60, rev=0x01) at 0x2e Register dump: idx 03 20 21 22 23 24 26 27 28 2a 2b 2c 2d 2e 2f val 00 60 01 01 00 44 2e 00 00 00 00 00 00 00 00 def RR 60 NA 00 00 44 MM MM RR NA NA NA NA NA NA LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 00 03 f0 06 02 0e 00 ff 00 00 LDN 0x03 (Parallel port) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 00 3a 00 def 00 00 00 00 04 3c 00 LDN 0x04 (COM1) idx 30 60 61 70 f0 val 00 00 00 00 00 def 00 00 00 00 00 LDN 0x05 (COM2 / IR) idx 30 60 61 70 f0 f1 f2 val 00 00 00 00 00 02 03 def NA 00 00 00 00 02 03 LDN 0x07 (Keyboard) idx 30 70 72 f0 val 01 01 0c 00 def 00 00 00 00 LDN 0x09 (Game port) idx 30 60 61 val 00 00 00 def 00 00 00 LDN 0x0a (Power management events (PME)) idx 30 60 61 f0 val 01 06 80 01 def 00 00 00 NA LDN 0x0b (MPU-401) idx 30 60 61 70 val 00 03 30 00 def 00 03 30 05 No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

1 0

flashing bios failed (hadamarrr in IRC channel)
by godlike 06 Jun '10

06 Jun '10

1) # flashrom -V flashrom v0.9.1-r995 on Linux 2.6.27.42-0.1.1.xs5.6.0.44.111158xen (i686), built with libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-48) No coreboot table found. DMI string system-manufacturer: "Not Specified" DMI string system-product-name: "Not Specified" DMI string system-version: "Not Specified" DMI string baseboard-manufacturer: "Intel" DMI string baseboard-product-name: "S3000AH" DMI string baseboard-version: "D40859-208" DMI string chassis-type: "Desktop" Found chipset "Intel ICH7/ICH7R", enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0xf 0x7fffffff/0x7fffffff FWH IDSEL: 0xf 0x7fffffff/0x7fffffff FWH IDSEL: 0xf 0x7fffffff/0x7fffffff FWH IDSEL: 0xf 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled Maximum FWH chip size: 0x200000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2 tried to set 0xdc to 0x3 on ICH7/ICH7R failed (WARNING ONLY) Root Complex Register Block address = 0xfed1c000 GCS = 0x444: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x000c (SPIS) 0x02: 0x4140 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0xbf4125bf (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00e00000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x463b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0xc79f0190 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, FAILED! This chipset supports the following protocols: SPI. Calibrating delay loop... 2192M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1020 us, 10000 myus = 10023 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 0c Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is set Chip status register: Bit 2 / Block Protect 0 (BP0) is set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : 1C0000H-1FFFFFH Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040B.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. 2) # lspci -nnvvvxxx 00:00.0 0600: 8086:2778 Subsystem: 8086:348e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00: 86 80 78 27 06 01 90 20 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 90 d1 fe 01 40 d1 fe 03 00 00 f0 01 80 d1 fe 50: 00 00 02 00 01 00 00 00 00 00 00 00 00 00 00 00 60: 01 30 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 11 11 11 33 33 00 40 00 47 00 e0 1a 79 00 a0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 91 00 00 00 e0: 09 00 09 41 ca 40 aa 9d 0c 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 00 00 00 00 00 00 00:1c.0 0604: 8086:27d0 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 1, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00: 86 80 d0 27 47 01 10 00 01 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 01 c0 0f 00 00 06 00 10 00 41 4c 11 01 50: 00 00 01 10 e0 0c 08 00 00 00 00 00 06 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 0d a0 00 00 86 80 d0 27 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 80 00 11 80 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1c.4 0604: 8086:27e0 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 5, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00: 86 80 e0 27 47 01 10 00 01 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 00 40: 10 80 41 01 c0 0f 00 00 06 00 10 00 11 4c 11 05 50: 00 00 01 10 60 05 28 00 00 00 00 00 06 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 0d a0 00 00 86 80 e0 27 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1c.5 0604: 8086:27e2 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 6 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 6, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00: 86 80 e2 27 47 01 10 00 01 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 20 20 00 00 20: 10 e8 10 e8 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 02 03 00 40: 10 80 41 01 c0 0f 00 00 06 00 10 00 11 2c 11 06 50: 40 00 11 30 60 05 30 00 00 00 48 01 06 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 0d a0 00 00 86 80 e2 27 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00 e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.0 0c03: 8086:27c8 (rev 01) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 3080 [size=32] 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.1 0c03: 8086:27c9 (rev 01) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 3060 [size=32] 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 61 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.2 0c03: 8086:27ca (rev 01) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 3040 [size=32] 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.3 0c03: 8086:27cb (rev 01) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 3020 [size=32] 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20) Subsystem: 8086:348e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e8200400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00: 86 80 cc 27 46 01 90 02 01 20 03 0c 00 00 00 00 10: 00 04 20 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 00 00 00 00 00 00 01 00 00 01 00 00 08 e0 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 ff 00 ff 00 20 00 00 88 e0: 00 00 00 00 db b6 6d 00 00 00 00 00 00 00 00 00 f0: 00 80 00 09 88 85 40 00 86 0f 01 00 06 17 02 a0 00:1e.0 0604: 8086:244e (rev e1) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: e8000000-e80fffff Prefetchable memory behind bridge: 00000000e0000000-00000000e7f00000 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00: 86 80 4e 24 47 01 10 00 e1 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 20 10 10 80 22 20: 00 e8 00 e8 01 e0 f1 e7 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 0b 01 40: 00 00 00 00 00 00 00 00 00 00 00 00 40 12 00 00 50: 0d 00 00 00 86 80 8e 34 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.0 0601: 8086:27b8 (rev 01) Subsystem: 8086:348e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00: 86 80 b8 27 47 01 10 02 01 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 04 00 00 80 00 00 00 01 05 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 8b 89 8b 8a d0 00 00 00 80 89 80 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 0f 14 81 06 7c 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 02 04 00 30 00 00 00 13 00 00 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 00 00 c0 08 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 11 11 00 00 ff ff 00 00 cf ff 00 00 02 00 00 00 e0: 09 00 0c 10 00 00 20 00 00 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 30b0 [size=16] 00: 86 80 df 27 05 00 88 02 01 8a 01 01 00 00 00 00 10: d9 30 00 00 ed 30 00 00 d1 30 00 00 e9 30 00 00 20: b1 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: 00 c0 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f) Subsystem: 8086:348e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 30c8 [size=8] Region 1: I/O ports at 30e4 [size=4] Region 2: I/O ports at 30c0 [size=8] Region 3: I/O ports at 30e0 [size=4] Region 4: I/O ports at 30a0 [size=16] Region 5: Memory at e8200000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 c0 27 47 00 b0 02 01 8f 01 01 00 00 00 00 10: c9 30 00 00 e5 30 00 00 c1 30 00 00 e1 30 00 00 20: a1 30 00 00 00 00 20 e8 00 00 00 00 86 80 8e 34 30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 02 00 00 40: 00 80 08 80 00 00 00 00 04 00 00 01 00 00 00 00 50: 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 2f 10 80 01 00 40 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 00:1f.3 0c05: 8086:27da (rev 01) Subsystem: 8086:348e Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 3000 [size=32] 00: 86 80 da 27 41 01 80 02 01 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 30 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00 03:00.0 0200: 8086:108c (rev 03) Subsystem: 8086:348f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1279 Region 0: Memory at e8180000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at e8100000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee0100c Data: 41c0 Capabilities: [e0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <64us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <64us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number a5-ff-56-ff-ff-17-15-00 00: 86 80 8c 10 47 05 10 00 03 00 00 02 10 00 80 00 10: 00 00 18 e8 00 00 10 e8 01 20 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8f 34 30: 00 00 00 00 c8 00 00 00 00 00 00 00 09 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 0f d0: 05 e0 81 00 0c 10 e0 fe 00 00 00 00 c0 41 00 00 e0: 10 00 01 00 c1 0c 00 00 10 28 1a 00 11 1c 03 00 f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 03:00.3 0700: 8086:108f (rev 03) (prog-if 02) Subsystem: 8086:0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 19 Region 0: I/O ports at 2020 [size=8] Region 1: Memory at e81a1000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <64us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <64us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number a5-ff-56-ff-ff-17-15-00 00: 86 80 8f 10 47 01 10 00 03 02 00 07 10 00 80 00 10: 21 20 00 00 00 10 1a e8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 40 00 0f d0: 05 e0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 00 01 00 c1 0c 00 00 10 08 1a 00 11 1c 03 00 f0: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 03:00.4 0c07: 8086:108e (rev 03) (prog-if 01) Subsystem: 8086:0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 11 Region 0: Memory at e81a0000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 2028 [size=4] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Endpoint IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <64us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <64us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number a5-ff-56-ff-ff-17-15-00 00: 86 80 8e 10 47 01 10 00 03 01 07 0c 10 00 80 00 10: 00 00 1a e8 29 20 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 40 00 0f d0: 05 e0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 00 01 00 c1 0c 00 00 10 08 1a 00 11 1c 03 00 f0: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 04:04.0 0300: 1002:515e (rev 02) Subsystem: 8086:348e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 1000 [size=256] Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fffe0000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 5e 51 87 03 90 02 02 00 00 03 10 20 00 00 10: 08 00 00 e0 01 10 00 00 00 00 00 e8 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 30: 00 00 fe ff 50 00 00 00 00 00 00 00 0b 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 8e 34 50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3) # superiotool -deV superiotool r5537 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0x0000, rev=0x00 Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x4400, id=0x0289 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x8902, rev=0x1 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x8902, rev=0x1 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x8902, rev=0x1 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x8902, rev=0x1 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Found SMSC SCH5027 (id=0x89, rev=0x02) at 0x2e No dump available for this Super I/O No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. 4) Name of the board is Intel S3000AH 5) Bios link: http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror… 6) I've backuped old bios by command: flashrom -r bios.bkp I'ys size is same as new bios file. Thanks a lot for any help and sorry for trouble =(.

1 0

ECS P6IWP-Fe works
by Anders Jenbo 06 Jun '10

06 Jun '10

The ECS P6IWP-Fe can be added to the list of out of the box boards. Confirmed with two Intel 82802AB But it killed a PMC Pm49FL004 as well as another 512KB FWH chip (I think it was a SST). -Anders

1 0

Intel 82802AB write confirmed
by Anders Jenbo 06 Jun '10

06 Jun '10

Hi, i have confirmed several writes to two individual Intel 82802AB chips.

1 0

[PATCH] Fix NetBSD linking
by Carl-Daniel Hailfinger 05 Jun '10

05 Jun '10

NetBSD needs libpciutils (which is called libpci on pretty much every other platform and lives in the pciutils package) and apparently the libpciutils on NetBSD needs the NetBSD-native libpci (no equivalent on other platforms). Thanks to Jonathan A. Kollasch for reporting. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-netbsd/Makefile =================================================================== --- flashrom-netbsd/Makefile (Revision 1028) +++ flashrom-netbsd/Makefile (Arbeitskopie) @@ -220,8 +220,10 @@ FEATURE_CFLAGS += -D'NEED_PCI=1' PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o ifeq ($(OS_ARCH), NetBSD) -LIBS += -lpciutils # The libpci we want. -LIBS += -l$(shell uname -p) # For (i386|x86_64)_iopl(2). +# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. +LIBS += -lpciutils -lpci +# For (i386|x86_64)_iopl(2). +LIBS += -l$(shell uname -p) else ifeq ($(OS_ARCH), DOS) # FIXME There needs to be a better way to do this -- http://www.hailfinger.org/

2 2

[commit] r1033 - trunk
by repository service 05 Jun '10

05 Jun '10

Author: hailfinger Date: Sat Jun 5 01:24:57 2010 New Revision: 1033 URL: http://flashrom.org/trac/coreboot/changeset/1033 Log: NetBSD needs libpciutils (which is called libpci on pretty much every other platform and lives in the pciutils package) and apparently the libpciutils on NetBSD needs the NetBSD-native libpci (no equivalent on other platforms). Thanks to Jonathan A. Kollasch for reporting. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Jun 5 01:20:21 2010 (r1032) +++ trunk/Makefile Sat Jun 5 01:24:57 2010 (r1033) @@ -220,8 +220,10 @@ FEATURE_CFLAGS += -D'NEED_PCI=1' PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o ifeq ($(OS_ARCH), NetBSD) -LIBS += -lpciutils # The libpci we want. -LIBS += -l$(shell uname -p) # For (i386|x86_64)_iopl(2). +# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. +LIBS += -lpciutils -lpci +# For (i386|x86_64)_iopl(2). +LIBS += -l$(shell uname -p) else ifeq ($(OS_ARCH), DOS) # FIXME There needs to be a better way to do this

1 0

[PATCH] Turn on format string checking
by Carl-Daniel Hailfinger 05 Jun '10

05 Jun '10

gcc and clang can check format strings of printf-like functions. Since we don't support any other compilers right now, enable that extension unconditionally. Fix the bugs found by format string checking. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-printf_format_warning/flash.h =================================================================== --- flashrom-printf_format_warning/flash.h (Revision 1028) +++ flashrom-printf_format_warning/flash.h (Arbeitskopie) @@ -588,7 +588,8 @@ #define NT 1 /* Not tested */ /* cli_output.c */ -int print(int type, const char *fmt, ...); +/* Let gcc and clang check for correct printf-style format strings. */ +int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); #define MSG_ERROR 0 #define MSG_INFO 1 #define MSG_DEBUG 2 Index: flashrom-printf_format_warning/flashrom.c =================================================================== --- flashrom-printf_format_warning/flashrom.c (Revision 1028) +++ flashrom-printf_format_warning/flashrom.c (Arbeitskopie) @@ -394,7 +394,7 @@ int register_shutdown(void (*function) (void *data), void *data) { if (shutdown_fn_count >= SHUTDOWN_MAXFN) { - msg_perr("Tried to register more than %n shutdown functions.\n", + msg_perr("Tried to register more than %i shutdown functions.\n", SHUTDOWN_MAXFN); return 1; } Index: flashrom-printf_format_warning/udelay.c =================================================================== --- flashrom-printf_format_warning/udelay.c (Revision 1028) +++ flashrom-printf_format_warning/udelay.c (Arbeitskopie) @@ -91,7 +91,7 @@ msg_pinfo("Calibrating delay loop... "); resolution = measure_os_delay_resolution(); if (resolution) { - msg_pdbg("OS timer resolution is %u usecs, ", resolution); + msg_pdbg("OS timer resolution is %lu usecs, ", resolution); } else { msg_pinfo("OS timer resolution is unusable. "); } -- http://www.hailfinger.org/

2 2

[commit] r1032 - trunk
by repository service 05 Jun '10

05 Jun '10

Author: hailfinger Date: Sat Jun 5 01:20:21 2010 New Revision: 1032 URL: http://flashrom.org/trac/coreboot/changeset/1032 Log: gcc and clang can check format strings of printf-like functions. Since we don't support any other compilers right now, enable that extension unconditionally. Fix the bugs found by format string checking. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/flash.h trunk/flashrom.c trunk/udelay.c Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Fri Jun 4 21:05:39 2010 (r1031) +++ trunk/flash.h Sat Jun 5 01:20:21 2010 (r1032) @@ -591,7 +591,8 @@ #define NT 1 /* Not tested */ /* cli_output.c */ -int print(int type, const char *fmt, ...); +/* Let gcc and clang check for correct printf-style format strings. */ +int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); #define MSG_ERROR 0 #define MSG_INFO 1 #define MSG_DEBUG 2 Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Fri Jun 4 21:05:39 2010 (r1031) +++ trunk/flashrom.c Sat Jun 5 01:20:21 2010 (r1032) @@ -394,7 +394,7 @@ int register_shutdown(void (*function) (void *data), void *data) { if (shutdown_fn_count >= SHUTDOWN_MAXFN) { - msg_perr("Tried to register more than %n shutdown functions.\n", + msg_perr("Tried to register more than %i shutdown functions.\n", SHUTDOWN_MAXFN); return 1; } Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Fri Jun 4 21:05:39 2010 (r1031) +++ trunk/udelay.c Sat Jun 5 01:20:21 2010 (r1032) @@ -91,7 +91,7 @@ msg_pinfo("Calibrating delay loop... "); resolution = measure_os_delay_resolution(); if (resolution) { - msg_pdbg("OS timer resolution is %u usecs, ", resolution); + msg_pdbg("OS timer resolution is %lu usecs, ", resolution); } else { msg_pinfo("OS timer resolution is unusable. "); }

1 0

HP NetServer E 800
by Andrew Morgan 05 Jun '10

05 Jun '10

Here is the output of the requested information for the HP NetServer E 800, chipset not detected by flashrom. BIOS and other onboard firmware (SCSI controller/s): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&… The name is the name of the machine, I don't know if the board has a different identifier. -- Andrew.

1 0

ASUS A8N-VM CSM results (write/erase failed)
by Ville Skyttä 04 Jun '10

04 Jun '10

Hello, I tried out flashrom on an ASUS A8N-VM CSM board: read seemed to go fine, but write failed. Information about the board: http://www.asus.com/product.aspx?P_ID=JBqqlpj4cspbSa3s flashrom -V, lspci -nnvvxxx, superiotool -deV, flashrom -rV and flashrom -wV output is attached. The BIOS I was trying to write was the rev 1001 one available from the above ASUS page. Per agaran's and roysjosh's friendly help on IRC I checked the BIOS I read with -r with -v and it says VERIFIED so I suppose I'll go ahead and reboot later today. One note about the board testing Wiki page you may want to clarify: "To check if you can read the existing BIOS image from the chip, run flashrom -r backup.bin. Make sure that backup.bin contains a useful BIOS image. (Some chipsets will return 0xff for large areas of flash without any error messages.)" For a BIOS newbie like me, the remark in parenthesis doesn't tell much - is it a good or a bad sign if a chipset returns 0xff for large areas of flash without any error messages? (Bad, I guess ;))

2 4

[PATCH] Disallow the internal programmer on non-x86 for now
by Carl-Daniel Hailfinger 04 Jun '10

04 Jun '10

The internal programmer needs correct information about flash_base and chip window top/bottom alignment on non-x86 before it can be used. Abort any internal programmer action for now until the code is fixed. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-disable_internal_nonx86/internal.c =================================================================== --- flashrom-disable_internal_nonx86/internal.c (Revision 1013) +++ flashrom-disable_internal_nonx86/internal.c (Arbeitskopie) @@ -165,16 +165,22 @@ pci_init(pacc); /* Initialize the PCI library */ pci_scan_bus(pacc); /* We want to get the list of devices */ - /* We look at the lbtable first to see if we need a +#if defined(__i386__) || defined(__x86_64__) + /* We look at the cbtable first to see if we need a * mainboard specific flash enable sequence. */ coreboot_init(); -#if defined(__i386__) || defined(__x86_64__) dmi_init(); /* Probe for the Super I/O chip and fill global struct superio. */ probe_superio(); +#else + /* FIXME: Enable cbtable searching on all non-x86 platforms supported + * by coreboot. + * FIXME: Find a replacement for DMI on non-x86. + * FIXME: Enable SuperI/O probing once port I/O is possible. + */ #endif /* Warn if a laptop is detected. */ @@ -200,6 +206,7 @@ } } +#if __FLASHROM_LITTLE_ENDIAN__ /* try to enable it. Failure IS an option, since not all motherboards * really need this to be done, etc., etc. */ @@ -220,7 +227,25 @@ * The error code might have been a warning only. * Besides that, we don't check the board enable return code either. */ +#if defined(__i386__) || defined(__x86_64__) return 0; +#else + msg_perr("Your platform is not supported yet for the internal " + "programmer due to missing flash_base and top/bottom " + "alignment information.\n" + "Aborting.\n"); + return 1; +#endif +#else + /* FIXME: Remove this unconditional abort once all PCI drivers are + * converted to use little-endian accesses for memory BARs. + */ + msg_perr("Your platform is not supported yet for the internal " + "programmer because it has not been converted from native " + "endian to little endian access yet.\n" + "Aborting.\n"); + return 1; +#endif } int internal_shutdown(void) -- http://www.hailfinger.org/

3 7

[commit] r1031 - trunk
by repository service 04 Jun '10

04 Jun '10

Author: hailfinger Date: Fri Jun 4 21:05:39 2010 New Revision: 1031 URL: http://flashrom.org/trac/coreboot/changeset/1031 Log: The internal programmer needs correct information about flash_base and chip window top/bottom alignment on non-x86 before it can be used. Abort any internal programmer action for now until the code is fixed. Add the concept of a processor enable for systems where flashing is impacted by processor settings or processor model. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Added: trunk/processor_enable.c Modified: trunk/Makefile trunk/flash.h trunk/internal.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Jun 4 19:07:39 2010 (r1030) +++ trunk/Makefile Fri Jun 4 21:05:39 2010 (r1031) @@ -124,7 +124,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o internal.o +PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o # FIXME: The PROGRAMMER_OBJS below should only be included on x86. PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o NEED_PCI := yes Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Fri Jun 4 19:07:39 2010 (r1030) +++ trunk/flash.h Fri Jun 4 21:05:39 2010 (r1031) @@ -361,6 +361,9 @@ /* chipset_enable.c */ int chipset_flash_enable(void); +/* processor_enable.c */ +int processor_flash_enable(void); + /* physmap.c */ void *physmap(const char *descr, unsigned long phys_addr, size_t len); void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Fri Jun 4 19:07:39 2010 (r1030) +++ trunk/internal.c Fri Jun 4 21:05:39 2010 (r1031) @@ -165,16 +165,28 @@ pci_init(pacc); /* Initialize the PCI library */ pci_scan_bus(pacc); /* We want to get the list of devices */ - /* We look at the lbtable first to see if we need a + if (processor_flash_enable()) { + msg_perr("Processor detection/init failed.\n" + "Aborting.\n"); + return 1; + } + +#if defined(__i386__) || defined(__x86_64__) + /* We look at the cbtable first to see if we need a * mainboard specific flash enable sequence. */ coreboot_init(); -#if defined(__i386__) || defined(__x86_64__) dmi_init(); /* Probe for the Super I/O chip and fill global struct superio. */ probe_superio(); +#else + /* FIXME: Enable cbtable searching on all non-x86 platforms supported + * by coreboot. + * FIXME: Find a replacement for DMI on non-x86. + * FIXME: Enable Super I/O probing once port I/O is possible. + */ #endif /* Warn if a laptop is detected. */ @@ -200,6 +212,7 @@ } } +#if __FLASHROM_LITTLE_ENDIAN__ /* try to enable it. Failure IS an option, since not all motherboards * really need this to be done, etc., etc. */ @@ -220,7 +233,26 @@ * The error code might have been a warning only. * Besides that, we don't check the board enable return code either. */ +#if defined(__i386__) || defined(__x86_64__) return 0; +#else + msg_perr("Your platform is not supported yet for the internal " + "programmer due to missing\n" + "flash_base and top/bottom alignment information.\n" + "Aborting.\n"); + return 1; +#endif +#else + /* FIXME: Remove this unconditional abort once all PCI drivers are + * converted to use little-endian accesses for memory BARs. + */ + msg_perr("Your platform is not supported yet for the internal " + "programmer because it has\n" + "not been converted from native endian to little endian " + "access yet.\n" + "Aborting.\n"); + return 1; +#endif } int internal_shutdown(void) Added: trunk/processor_enable.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/processor_enable.c Fri Jun 4 21:05:39 2010 (r1031) @@ -0,0 +1,45 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the processor specific flash enables and system settings. + */ + +#include "flash.h" + +#if defined(__i386__) || defined(__x86_64__) + +int processor_flash_enable(void) +{ + /* On x86, flash access is not processor specific except on + * AMD Elan SC520, AMD Geode and maybe other SoC-style CPUs. + * FIXME: Move enable_flash_cs5536 and get_flashbase_sc520 here. + */ + return 0; +} + +#else + +int processor_flash_enable(void) +{ + /* Not implemented yet. Oh well. */ + return 1; +} + +#endif

1 0

[PATCH] Make the 'flashrom --help' output look a bit nicer
by Uwe Hermann 04 Jun '10

04 Jun '10

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1030 - trunk
by repository service 04 Jun '10

04 Jun '10

Author: uwe Date: Fri Jun 4 19:07:39 2010 New Revision: 1030 URL: http://flashrom.org/trac/coreboot/changeset/1030 Log: Make the 'flashrom --help' output look a bit nicer. Only print "flashrom" as the program name unconditionally, not the full path and program name (e.g. "/home/foo/bar/baz/flashrom" or on Windows "C:\Foo\Bar\Whatever\flashrom.exe"). The path or exact executable name is not really useful to print here, if you managed to run --help you already know it, and it just makes the output look ugly. Also, add a missing newline to make the output look nicer. Finally, revert the "CONFIG_PRINT_WIKI ?= yes" change which accidentally slipped into r1029. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/Makefile trunk/cli_classic.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Jun 4 18:39:35 2010 (r1029) +++ trunk/Makefile Fri Jun 4 19:07:39 2010 (r1030) @@ -120,7 +120,7 @@ CONFIG_DEDIPROG ?= no # Disable wiki printing by default. It is only useful if you have wiki access. -CONFIG_PRINT_WIKI ?= yes +CONFIG_PRINT_WIKI ?= no ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Fri Jun 4 18:39:35 2010 (r1029) +++ trunk/cli_classic.c Fri Jun 4 19:07:39 2010 (r1030) @@ -38,14 +38,13 @@ int remaining = 0; enum programmer p; - printf("Usage: %s [-n] [-V] [-f] [-h|-R|-L|" + printf("Usage: flashrom [-n] [-V] [-f] [-h|-R|-L|" #if CONFIG_PRINT_WIKI == 1 "-z|" #endif "-E|-r <file>|-w <file>|-v <file>]\n" " [-c <chipname>] [-m [<vendor>:]<part>] [-l <file>]\n" - " [-i <image>] [-p <programmername>[:<parameters>]]\n", - name); + " [-i <image>] [-p <programmername>[:<parameters>]]\n\n"); printf("Please note that the command line interface for flashrom has " "changed between\n" @@ -119,9 +118,9 @@ "flash chips.\n\n"); } -void cli_classic_abort_usage(const char *name) +void cli_classic_abort_usage(void) { - printf("Please run \"%s --help\" for usage info.\n", name); + printf("Please run \"flashrom --help\" for usage info.\n"); exit(1); } @@ -185,7 +184,7 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } filename = strdup(optarg); read_it = 1; @@ -194,7 +193,7 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } filename = strdup(optarg); write_it = 1; @@ -204,12 +203,12 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } if (dont_verify_it) { fprintf(stderr, "--verify and --noverify are" "mutually exclusive. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } filename = strdup(optarg); verify_it = 1; @@ -218,7 +217,7 @@ if (verify_it) { fprintf(stderr, "--verify and --noverify are" "mutually exclusive. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } dont_verify_it = 1; break; @@ -232,7 +231,7 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } erase_it = 1; break; @@ -244,7 +243,7 @@ fprintf(stderr, "Error: Internal programmer support " "was not compiled in and --mainboard only\n" "applies to the internal programmer. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); #endif break; case 'f': @@ -253,7 +252,7 @@ case 'l': tempstr = strdup(optarg); if (read_romlayout(tempstr)) - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); break; case 'i': tempstr = strdup(optarg); @@ -263,7 +262,7 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } list_supported = 1; break; @@ -272,13 +271,13 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } list_supported_wiki = 1; #else fprintf(stderr, "Error: Wiki output was not compiled " "in. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); #endif break; case 'p': @@ -310,7 +309,7 @@ if (programmer == PROGRAMMER_INVALID) { fprintf(stderr, "Error: Unknown programmer " "%s.\n", optarg); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } break; case 'R': @@ -318,7 +317,7 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } exit(0); break; @@ -326,13 +325,13 @@ if (++operation_specified > 1) { fprintf(stderr, "More than one operation " "specified. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } cli_classic_usage(argv[0]); exit(0); break; default: - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); break; } } @@ -353,14 +352,14 @@ if (optind < argc) { fprintf(stderr, "Error: Extra parameter found.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } #if CONFIG_INTERNAL == 1 if ((programmer != PROGRAMMER_INTERNAL) && (lb_part || lb_vendor)) { fprintf(stderr, "Error: --mainboard requires the internal " "programmer. Aborting.\n"); - cli_classic_abort_usage(argv[0]); + cli_classic_abort_usage(); } #endif

1 0

[PATCH 1/1] Fix links for Gigabyte motherboards (2nd try)
by Peter Lemenkov 04 Jun '10

04 Jun '10

2 1

[commit] r1029 - trunk
by repository service 04 Jun '10

04 Jun '10

Author: uwe Date: Fri Jun 4 18:39:35 2010 New Revision: 1029 URL: http://flashrom.org/trac/coreboot/changeset/1029 Log: Fix URLs for GIGABYTE motherboards. Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/Makefile trunk/print.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Jun 3 23:48:13 2010 (r1028) +++ trunk/Makefile Fri Jun 4 18:39:35 2010 (r1029) @@ -120,7 +120,7 @@ CONFIG_DEDIPROG ?= no # Disable wiki printing by default. It is only useful if you have wiki access. -CONFIG_PRINT_WIKI ?= no +CONFIG_PRINT_WIKI ?= yes ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Jun 3 23:48:13 2010 (r1028) +++ trunk/print.c Fri Jun 4 18:39:35 2010 (r1029) @@ -332,24 +332,24 @@ B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", NULL), B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), - B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), - B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-MA78G-DS3H", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), /* TODO: Rev 1.x or 2.x? */ - B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ - B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), - B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…", NULL), + B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), + B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), + B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), + B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), + B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), + B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), + B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), + B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), + B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), + B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), + B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL), + B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL), + B("GIGABYTE", "GA-MA78G-DS3H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL), /* TODO: Rev 1.x or 2.x? */ + B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ + B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), + B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), + B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), B("HP", "DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), B("HP", "Vectra VL400 PC", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), B("HP", "Vectra VL420 SFF PC", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),

1 0

"""help us finish support for your chipset. Thanks."""
by chris yagami 04 Jun '10

04 Jun '10

flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "N68-S".... Attached file txt

1 0

[PATCH] new windows port
by Stefan Reinauer 04 Jun '10

04 Jun '10

Hi, I separated the direct io access code from the flashrom changes, to make this code easily available for the other coreboot utilities, too. The remaining windows patch is rather small. I'll clean up the directio code some more and make a release asap. Best regards, Stefan -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

3 9

[RFC] #ifdef or #if defined()
by Carl-Daniel Hailfinger 04 Jun '10

04 Jun '10

Right now flashrom uses a mix of #ifdef and #if defined() and due to that, readability suffers. Should we use #if defined() everywhere and kill #ifdef? Should we evaluate the preprocessor defines for their value instead of their presence to avoid strange problems once someone defines anything to 0? Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[PATCH] Handle insufficient DOS timer precision
by Carl-Daniel Hailfinger 04 Jun '10

04 Jun '10

Handle insufficient DOS timer precision by measuring a 100 ms delay instead of a 100 us delay. This should reduce the likelihood of flashrom timer complaints from 100% to 50%. If you want less complaints, use 1000 ms instead. This is mostly a proof of concept and I'd appreciate tests. Once I know which #defines to look for on MinGW and Cygwin, I can modify the #if to cover them as well. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-measure_delay_precision_dos/udelay.c =================================================================== --- flashrom-measure_delay_precision_dos/udelay.c (Revision 1008) +++ flashrom-measure_delay_precision_dos/udelay.c (Arbeitskopie) @@ -93,7 +93,19 @@ * a scheduler delay or something similar. */ for (i = 0; i < 4; i++) { - if (measure_delay(100) < 90) { +#if !defined(__DJGPP__) + timeusec = measure_delay(100); +#else + /* This zero delay workaround should be active for + * DOS and Windows and maybe libpayload. The criterion + * here is insufficient (worse than 100 us) OS timer + * resolution which will result in measure_delay(100)=0 + * whereas a longer delay (100 ms) will be sufficient + * to get a nonzero time measurement. + */ + timeusec = measure_delay(100000) / 1000; +#endif + if (timeusec < 90) { msg_pdbg("delay more than 10%% too short, " "recalculating... "); goto recalibrate; -- http://www.hailfinger.org/

3 5

[commit] r1001 - tags/flashrom-0.9.2
by repository service 04 Jun '10

04 Jun '10

Author: hailfinger Date: Wed May 19 18:55:43 2010 New Revision: 1001 URL: http://flashrom.org/trac/coreboot/changeset/1001 Log: Tag flashrom 0.9.2 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv(a)skynet.be> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Added: tags/flashrom-0.9.2/ - copied from r1000, trunk/

3 3

[commit] r1028 - trunk
by repository service 03 Jun '10

03 Jun '10

Author: hailfinger Date: Thu Jun 3 23:48:13 2010 New Revision: 1028 URL: http://flashrom.org/trac/coreboot/changeset/1028 Log: Do not trust the OS at all and measure timer precision before calibrating the delay loop and use that measurement to get reasonable precision for our own delay code. Print a measurement for a delay of 4x the OS timer resolution. Be precise about how bad the deviation was if we had to recalculate. Tested on Windows XP, 32 bit, built using MinGW by Uwe. Tested on FreeDOS v1.0 Final, 32bit, built using DJGPP 4.3.2 by Idwer. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Idwer Vollering <vidwer+lists.flashrom(a)gmail.com> Modified: trunk/udelay.c Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Thu Jun 3 18:35:51 2010 (r1027) +++ trunk/udelay.c Thu Jun 3 23:48:13 2010 (r1028) @@ -37,6 +37,30 @@ } } +unsigned long measure_os_delay_resolution(void) +{ + unsigned long timeusec; + struct timeval start, end; + unsigned long counter = 0; + + gettimeofday(&start, 0); + timeusec = 0; + + while (!timeusec && (++counter < 1000000000)) { + gettimeofday(&end, 0); + timeusec = 1000000 * (end.tv_sec - start.tv_sec) + + (end.tv_usec - start.tv_usec); + /* Protect against time going forward too much. */ + if ((end.tv_sec > start.tv_sec) && + ((end.tv_sec - start.tv_sec) >= LONG_MAX / 1000000 - 1)) + timeusec = 0; + /* Protect against time going backwards during leap seconds. */ + if ((end.tv_sec < start.tv_sec) || (timeusec > LONG_MAX)) + timeusec = 0; + } + return timeusec; +} + unsigned long measure_delay(int usecs) { unsigned long timeusec; @@ -61,10 +85,16 @@ void myusec_calibrate_delay(void) { unsigned long count = 1000; - unsigned long timeusec; + unsigned long timeusec, resolution; int i, tries = 0; msg_pinfo("Calibrating delay loop... "); + resolution = measure_os_delay_resolution(); + if (resolution) { + msg_pdbg("OS timer resolution is %u usecs, ", resolution); + } else { + msg_pinfo("OS timer resolution is unusable. "); + } recalibrate: count = 1000; @@ -94,9 +124,27 @@ * a scheduler delay or something similar. */ for (i = 0; i < 4; i++) { - if (measure_delay(100) < 90) { - msg_pdbg("delay more than 10%% too short, " - "recalculating... "); + if (resolution && (resolution < 10)) { + timeusec = measure_delay(100); + } else if (resolution && + (resolution < ULONG_MAX / 200)) { + timeusec = measure_delay(resolution * 10) * + 100 / (resolution * 10); + } else { + /* This workaround should be active for broken + * OS and maybe libpayload. The criterion + * here is horrible or non-measurable OS timer + * resolution which will result in + * measure_delay(100)=0 whereas a longer delay + * (1000 ms) may be sufficient + * to get a nonzero time measurement. + */ + timeusec = measure_delay(1000000) / 10000; + } + if (timeusec < 90) { + msg_pdbg("delay more than 10%% too short (got " + "%lu%% of expected delay), " + "recalculating... ", timeusec); goto recalibrate; } } @@ -113,6 +161,8 @@ msg_pdbg("1000 myus = %ld us, ", timeusec); timeusec = measure_delay(10000); msg_pdbg("10000 myus = %ld us, ", timeusec); + timeusec = measure_delay(resolution * 4); + msg_pdbg("%ld myus = %ld us, ", resolution * 4, timeusec); msg_pinfo("OK.\n"); }

1 0

[commit] r1027 - trunk
by repository service 03 Jun '10

03 Jun '10

Author: uwe Date: Thu Jun 3 18:35:51 2010 New Revision: 1027 URL: http://flashrom.org/trac/coreboot/changeset/1027 Log: Fix bug in wiki printing and whitespace (trivial). The required "-m" options were not in the wiki output due to a mistake that I think I introduced recently. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/print.c trunk/print_wiki.c Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Jun 3 02:49:50 2010 (r1026) +++ trunk/print.c Thu Jun 3 18:35:51 2010 (r1027) @@ -450,14 +450,14 @@ /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info laptops_known[] = { #if defined(__i386__) || defined(__x86_64__) - B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), - B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), - B("ASUS", "Eee PC 701 4G",0, "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), - B("Dell", "Latitude CPi A366XT",0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), - B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), - B("IBM/Lenovo", "Thinkpad T40p",0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), - B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), - B("Lenovo", "3000 V100 TF05Cxx",1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), + B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), + B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), + B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), + B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), + B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), + B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), + B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), #endif {}, Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Thu Jun 3 02:49:50 2010 (r1026) +++ trunk/print_wiki.c Thu Jun 3 18:35:51 2010 (r1027) @@ -146,8 +146,8 @@ k = 0; while ((b[k].vendor_name != NULL) - && !strcmp(b[k].vendor_name, boards[i].vendor) - && !strcmp(b[k].board_name, boards[i].name)) { + && strcmp(b[k].vendor_name, boards[i].vendor) + && strcmp(b[k].board_name, boards[i].name)) { k++; }

1 0

[commit] r1026 - trunk
by repository service 03 Jun '10

03 Jun '10

Author: hailfinger Date: Thu Jun 3 02:49:50 2010 New Revision: 1026 URL: http://flashrom.org/trac/coreboot/changeset/1026 Log: Fix fallout from r1021 which caused compile failures if only the dummy programmer was selected. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flash.h Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Tue Jun 1 18:09:06 2010 (r1025) +++ trunk/flash.h Thu Jun 3 02:49:50 2010 (r1026) @@ -25,6 +25,7 @@ #define __FLASH_H__ 1 #include <stdint.h> +#include <stddef.h> #include "hwaccess.h" #ifdef _WIN32 #include <windows.h> @@ -32,10 +33,6 @@ #undef max #endif -#ifndef NULL -#define NULL ((void *) 0) -#endif - typedef unsigned long chipaddr; enum programmer {

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom