- flashrom - mail.coreboot.org

[PATCH] Switch to AAI for some more SST chips
by Joshua Roys 07 Oct '10

07 Oct '10

Hello, Attached is a patch to switch a few more chips to AAI write. A comment is added to two entries due to the datasheets claiming AAI support but via a different opcode. I was able to test programming on one chip and the write time was more than halved. Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Josh

1 0

[commit] r1199 - trunk
by repository service 07 Oct '10

07 Oct '10

Author: hailfinger Date: Thu Oct 7 01:48:34 2010 New Revision: 1199 URL: http://flashrom.org/trac/flashrom/changeset/1199 Log: flashrom -L output did not contain a list of programmers nor were all programmers listed. Fix it and mention at least the name of each programmer. Wiki output is unchanged, and will need separate fixups. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/atahpt.c trunk/cli_classic.c trunk/flash.h trunk/flashrom.c trunk/ft2232_spi.c trunk/pcidev.c trunk/print.c Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/atahpt.c Thu Oct 7 01:48:34 2010 (r1199) @@ -30,7 +30,7 @@ #define PCI_VENDOR_ID_HPT 0x1103 -struct pcidev_status ata_hpt[] = { +const struct pcidev_status ata_hpt[] = { {0x1103, 0x0004, NT, "Highpoint", "HPT366/368/370/370A/372/372N"}, {0x1103, 0x0005, NT, "Highpoint", "HPT372A/372N"}, {0x1103, 0x0006, NT, "Highpoint", "HPT302/302N"}, Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/cli_classic.c Thu Oct 7 01:48:34 2010 (r1199) @@ -33,11 +33,6 @@ static void cli_classic_usage(const char *name) { - const char *pname; - int pnamelen; - int remaining = 0; - enum programmer p; - printf("Usage: flashrom [-n] [-V] [-f] [-h|-R|-L|" #if CONFIG_PRINT_WIKI == 1 "-z|" @@ -83,32 +78,9 @@ "in wiki syntax\n" #endif " -p | --programmer <name>[:<param>] specify the programmer " - "device"); - - for (p = 0; p < PROGRAMMER_INVALID; p++) { - pname = programmer_table[p].name; - pnamelen = strlen(pname); - if (remaining - pnamelen - 2 < 0) { - printf("\n "); - remaining = 43; - } else { - printf(" "); - remaining--; - } - if (p == 0) { - printf("("); - remaining--; - } - printf("%s", pname); - remaining -= pnamelen; - if (p < PROGRAMMER_INVALID - 1) { - printf(","); - remaining--; - } else { - printf(")\n"); - } - } + "device\n"); + list_programmers_linebreak(37, 80, 1); printf("\nYou can specify one of -h, -R, -L, " #if CONFIG_PRINT_WIKI == 1 "-z, " Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/flash.h Thu Oct 7 01:48:34 2010 (r1199) @@ -200,6 +200,7 @@ char *strcat_realloc(char *dest, const char *src); void print_version(void); void print_banner(void); +void list_programmers_linebreak(int startcol, int cols, int paren); int selfcheck(void); int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/flashrom.c Thu Oct 7 01:48:34 2010 (r1199) @@ -1332,6 +1332,47 @@ msg_ginfo("\n"); } +void list_programmers_linebreak(int startcol, int cols, int paren) +{ + const char *pname; + int pnamelen; + int remaining = 0; + int firstline = 1; + enum programmer p; + int i; + + for (p = 0; p < PROGRAMMER_INVALID; p++) { + pname = programmer_table[p].name; + pnamelen = strlen(pname); + if (remaining - pnamelen - 2 < 0) { + if (firstline) + firstline = 0; + else + printf("\n"); + for (i = 0; i < startcol; i++) + printf(" "); + remaining = cols - startcol; + } else { + printf(" "); + remaining--; + } + if (paren && (p == 0)) { + printf("("); + remaining--; + } + printf("%s", pname); + remaining -= pnamelen; + if (p < PROGRAMMER_INVALID - 1) { + printf(","); + remaining--; + } else { + if (paren) + printf(")"); + printf("\n"); + } + } +} + void print_sysinfo(void) { #if HAVE_UTSNAME == 1 Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/ft2232_spi.c Thu Oct 7 01:48:34 2010 (r1199) @@ -346,6 +346,7 @@ { int i; + msg_pinfo("USB devices:\n"); for (i = 0; devs[i].vendor_name != NULL; i++) { msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id, Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/pcidev.c Thu Oct 7 01:48:34 2010 (r1199) @@ -132,6 +132,7 @@ { int i; + msg_pinfo("PCI devices:\n"); for (i = 0; devs[i].vendor_name != NULL; i++) { msg_pinfo("%s %s [%02x:%02x]%s\n", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id, Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Oct 7 01:16:10 2010 (r1198) +++ trunk/print.c Thu Oct 7 01:48:34 2010 (r1199) @@ -223,49 +223,89 @@ void print_supported(void) { - print_supported_chips(); + print_supported_chips(); + + printf("\nSupported programmers:\n"); + list_programmers_linebreak(0, 80, 0); #if CONFIG_INTERNAL == 1 - print_supported_chipsets(); - print_supported_boards_helper(boards_known, "boards"); - print_supported_boards_helper(laptops_known, "laptops"); -#endif -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1 - printf("\nSupported PCI devices flashrom can use " - "as programmer:\n\n"); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_INTERNAL].name); + print_supported_chipsets(); + print_supported_boards_helper(boards_known, "boards"); + print_supported_boards_helper(laptops_known, "laptops"); +#endif +#if CONFIG_DUMMY == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_DUMMY].name); + /* FIXME */ #endif #if CONFIG_NIC3COM == 1 - print_supported_pcidevs(nics_3com); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_NIC3COM].name); + print_supported_pcidevs(nics_3com); #endif #if CONFIG_NICREALTEK == 1 - print_supported_pcidevs(nics_realtek); - print_supported_pcidevs(nics_realteksmc1211); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_NICREALTEK].name); + print_supported_pcidevs(nics_realtek); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_NICREALTEK2].name); + print_supported_pcidevs(nics_realteksmc1211); #endif #if CONFIG_NICNATSEMI == 1 - print_supported_pcidevs(nics_natsemi); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_NICNATSEMI].name); + print_supported_pcidevs(nics_natsemi); #endif #if CONFIG_GFXNVIDIA == 1 - print_supported_pcidevs(gfx_nvidia); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_GFXNVIDIA].name); + print_supported_pcidevs(gfx_nvidia); #endif #if CONFIG_DRKAISER == 1 - print_supported_pcidevs(drkaiser_pcidev); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_DRKAISER].name); + print_supported_pcidevs(drkaiser_pcidev); #endif #if CONFIG_SATASII == 1 - print_supported_pcidevs(satas_sii); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_SATASII].name); + print_supported_pcidevs(satas_sii); #endif #if CONFIG_ATAHPT == 1 - print_supported_pcidevs(ata_hpt); -#endif -#if CONFIG_NICINTEL_SPI == 1 - print_supported_pcidevs(nics_intel_spi); -#endif - -#if CONFIG_FT2232_SPI+CONFIG_DEDIPROG >= 1 - printf("\nSupported USB devices flashrom can use " - "as programmer:\n\n"); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_ATAHPT].name); + print_supported_pcidevs(ata_hpt); #endif - #if CONFIG_FT2232_SPI == 1 - print_supported_usbdevs(devs_ft2232spi); + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_FT2232_SPI].name); + print_supported_usbdevs(devs_ft2232spi); +#endif +#if CONFIG_SERPROG == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_SERPROG].name); + /* FIXME */ +#endif +#if CONFIG_BUSPIRATE_SPI == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_BUSPIRATE_SPI].name); + /* FIXME */ +#endif +#if CONFIG_DEDIPROG == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_DEDIPROG].name); + /* FIXME */ +#endif +#if CONFIG_RAYER_SPI == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_RAYER_SPI].name); + /* FIXME */ +#endif +#if CONFIG_NICINTEL_SPI == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_NICINTEL_SPI].name); + print_supported_pcidevs(nics_intel_spi); #endif }

1 0

[PATCH] Rename DirectIO to DirectHW
by Carl-Daniel Hailfinger 07 Oct '10

07 Oct '10

The Direct I/O library for Mac OS X is now called DirectHW to make sure people can find it via an internet search. DirectIO was a generic name for a concept and thus not a good distinguisher for a library. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-directio_directhw_rename/hwaccess.h =================================================================== --- flashrom-directio_directhw_rename/hwaccess.h (Revision 1194) +++ flashrom-directio_directhw_rename/hwaccess.h (Arbeitskopie) @@ -193,6 +193,7 @@ #define INL(x) __extension__ ({ u_int inl_tmp = (x); inl(inl_tmp); }) #else #if defined(__DARWIN__) + /* Header is part of the DirectHW library. */ #include <DirectIO/darwinio.h> #define off64_t off_t #define lseek64 lseek Index: flashrom-directio_directhw_rename/Makefile =================================================================== --- flashrom-directio_directhw_rename/Makefile (Revision 1194) +++ flashrom-directio_directhw_rename/Makefile (Arbeitskopie) @@ -42,6 +42,7 @@ endif ifeq ($(OS_ARCH), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include +# DirectIO framework can be found in the DirectHW library. LDFLAGS += -framework IOKit -framework DirectIO -L/opt/local/lib -L/usr/local/lib endif ifeq ($(OS_ARCH), FreeBSD) Index: flashrom-directio_directhw_rename/cbtable.c =================================================================== --- flashrom-directio_directhw_rename/cbtable.c (Revision 1194) +++ flashrom-directio_directhw_rename/cbtable.c (Arbeitskopie) @@ -204,7 +204,7 @@ struct lb_record *rec, *last; #ifdef __DARWIN__ - /* This is a hack. DirectIO fails to map physical address 0x00000000. + /* This is a hack. DirectHW fails to map physical address 0x00000000. * Why? */ start = 0x400; Index: flashrom-directio_directhw_rename/physmap.c =================================================================== --- flashrom-directio_directhw_rename/physmap.c (Revision 1194) +++ flashrom-directio_directhw_rename/physmap.c (Arbeitskopie) @@ -131,6 +131,7 @@ } #elif defined(__DARWIN__) +/* Header is part of the DirectHW library. */ #include <DirectIO/darwinio.h> #define MEM_DEV "DirectIO" Index: flashrom-directio_directhw_rename/README =================================================================== --- flashrom-directio_directhw_rename/README (Revision 1194) +++ flashrom-directio_directhw_rename/README (Arbeitskopie) @@ -87,8 +87,8 @@ To compile and run on Darwin/Mac OS X: - Install DirectIO from coresystems GmbH. - DirectIO is available at http://www.coresystems.de/en/directio. + Install DirectHW from coresystems GmbH. + DirectHW is available at http://www.coresystems.de/en/directhw . To cross-compile on Linux for DOS: -- http://www.hailfinger.org/

2 2

[commit] r1198 - trunk
by repository service 07 Oct '10

07 Oct '10

Author: hailfinger Date: Thu Oct 7 01:16:10 2010 New Revision: 1198 URL: http://flashrom.org/trac/flashrom/changeset/1198 Log: The Direct I/O library for Mac OS X is now called DirectHW to make sure people can find it via an internet search. DirectIO was a generic name for a concept and thus not a good distinguisher for a library. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Idwer Vollering <vidwer(a)gmail.com> Modified: trunk/Makefile trunk/README trunk/cbtable.c trunk/hwaccess.h Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Oct 7 01:03:21 2010 (r1197) +++ trunk/Makefile Thu Oct 7 01:16:10 2010 (r1198) @@ -42,6 +42,7 @@ endif ifeq ($(OS_ARCH), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include +# DirectIO framework can be found in the DirectHW library. LDFLAGS += -framework IOKit -framework DirectIO -L/opt/local/lib -L/usr/local/lib endif ifeq ($(OS_ARCH), FreeBSD) Modified: trunk/README ============================================================================== --- trunk/README Thu Oct 7 01:03:21 2010 (r1197) +++ trunk/README Thu Oct 7 01:16:10 2010 (r1198) @@ -87,8 +87,8 @@ To compile and run on Darwin/Mac OS X: - Install DirectIO from coresystems GmbH. - DirectIO is available at http://www.coresystems.de/en/directio. + Install DirectHW from coresystems GmbH. + DirectHW is available at http://www.coresystems.de/en/directhw . To cross-compile on Linux for DOS: Modified: trunk/cbtable.c ============================================================================== --- trunk/cbtable.c Thu Oct 7 01:03:21 2010 (r1197) +++ trunk/cbtable.c Thu Oct 7 01:16:10 2010 (r1198) @@ -203,7 +203,7 @@ struct lb_record *rec, *last; #ifdef __DARWIN__ - /* This is a hack. DirectIO fails to map physical address 0x00000000. + /* This is a hack. DirectHW fails to map physical address 0x00000000. * Why? */ start = 0x400; Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Thu Oct 7 01:03:21 2010 (r1197) +++ trunk/hwaccess.h Thu Oct 7 01:16:10 2010 (r1198) @@ -193,6 +193,7 @@ #define INL(x) __extension__ ({ u_int inl_tmp = (x); inl(inl_tmp); }) #else #if defined(__DARWIN__) + /* Header is part of the DirectHW library. */ #include <DirectIO/darwinio.h> #define off64_t off_t #define lseek64 lseek

1 0

[commit] r1197 - trunk
by repository service 07 Oct '10

07 Oct '10

Author: hailfinger Date: Thu Oct 7 01:03:21 2010 New Revision: 1197 URL: http://flashrom.org/trac/flashrom/changeset/1197 Log: Update the author list in the man page. Update programmer parameter documentation. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashrom.8 trunk/pcidev.c Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Wed Oct 6 04:56:44 2010 (r1196) +++ trunk/flashrom.8 Thu Oct 7 01:03:21 2010 (r1197) @@ -97,7 +97,7 @@ .sp * Force chip read and pretend the chip is there. .sp -* Force chip access even if the chip is bigger than the maximum supported\ +* Force chip access even if the chip is bigger than the maximum supported \ size for the flash bus. .sp * Force erase even if erase is known bad. @@ -169,6 +169,9 @@ .sp .BR "* nicsmc1211" " (for flash ROMs on RTL8139-compatible SMC2 network cards)" .sp +.BR "* nicnatsemi" " (for flash ROMs on National Semiconductor DP838* network \ +cards)" +.sp .BR "* gfxnvidia" " (for flash ROMs on NVIDIA graphics cards)" .sp .BR "* drkaiser" " (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)" @@ -187,6 +190,8 @@ .sp .BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)" .sp +.BR "* dediprog" " (for SPI flash ROMs attached to a Dediprog SF100)" +.sp .BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport \ based programmer)" .sp @@ -313,8 +318,8 @@ Example: .B "flashrom \-p dummy:bus=lpc+fwh" .TP -.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " gfxnvidia" , " satasii \ -" and " atahpt " programmers +.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " gfxnvidia\ +" , " satasii " and " atahpt " programmers These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported by the selected programmer is installed in your system. The syntax is @@ -396,6 +401,9 @@ .BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M ", " 8M (in Hz). The default is the maximum frequency of 8 MHz. .TP +.BR "dediprog " programmer +No parameters defined yet. +.TP .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use the optional @@ -484,28 +492,48 @@ .br Please see the individual files. .SH AUTHORS +Andrew Morgan <ziltro(a)ziltro.com> +.br Carl-Daniel Hailfinger .br Claus Gindhart <claus.gindhart(a)kontron.com> .br +David Borg <borg.db(a)gmail.com> +.br +David Hendricks <dhendrix(a)google.com> +.br Dominik Geyer <dominik.geyer(a)kontron.com> .br Eric Biederman .br Giampiero Giancipoli <gianci(a)email.it> .br +Helge Wagner <helge.wagner(a)ge.com> +.br +Idwer Vollering <vidwer+flashrom(a)gmail.com> +.br Joe Bao <Zheng.Bao(a)amd.com> .br +Jörg Fischer <turboj(a)gmx.de> +.br +Joshua Roys <roysjosh(a)gmail.com> +.br Luc Verhaegen <libv(a)skynet.be> .br Li-Ta Lo .br Markus Boas <ryven(a)ryven.de> .br +Mattias Mattsson <vitplister(a)gmail.com> +.br Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> .br Nikolay Petukhov <nikolay.petukhov(a)gmail.com> .br +Patrick Georgi <patrick.georgi(a)coresystems.de> +.br +Peter Lemenkov <lemenkov(a)gmail.com> +.br Peter Stuge <peter(a)stuge.se> .br Reinder E.N. de Haan <lb_reha(a)mveas.com> @@ -520,6 +548,8 @@ .br Stefan Wildemann <stefan.wildemann(a)kontron.com> .br +Stephan Guilloux <stephan.guilloux(a)free.fr> +.br Steven James <pyro(a)linuxlabs.com> .br Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Wed Oct 6 04:56:44 2010 (r1196) +++ trunk/pcidev.c Thu Oct 7 01:03:21 2010 (r1197) @@ -119,7 +119,7 @@ exit(1); } else if (found > 1) { msg_perr("Error: Multiple supported PCI devices found. " - "Use 'flashrom -p xxxx:bb:dd.f' \n" + "Use 'flashrom -p xxxx:pci=bb:dd.f' \n" "to explicitly select the card with the given BDF " "(PCI bus, device, function).\n"); exit(1);

1 0

[PATCH] remove duplicate includes
by Stefan Reinauer 06 Oct '10

06 Oct '10

See patch. -- coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. Tel.: +49 761 7668825 • Fax: +49 761 7664613 Email: info(a)coresystems.de • http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg • HRB 7656 Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

2 2

[commit] r1196 - trunk
by repository service 06 Oct '10

06 Oct '10

Author: stepan Date: Wed Oct 6 04:56:44 2010 New Revision: 1196 URL: http://flashrom.org/trac/flashrom/changeset/1196 Log: Remove duplicate includes from the code. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/atahpt.c trunk/bitbang_spi.c trunk/buspirate_spi.c trunk/cbtable.c trunk/chipset_enable.c trunk/cli_classic.c trunk/dummyflasher.c trunk/ft2232_spi.c trunk/gfxnvidia.c trunk/hwaccess.h trunk/internal.c trunk/mcp6x_spi.c trunk/pcidev.c trunk/physmap.c trunk/serial.c trunk/serprog.c Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/atahpt.c Wed Oct 6 04:56:44 2010 (r1196) @@ -20,7 +20,6 @@ #include <stdlib.h> #include <string.h> -#include <sys/types.h> #include "flash.h" #include "programmer.h" Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/bitbang_spi.c Wed Oct 6 04:56:44 2010 (r1196) @@ -18,7 +18,6 @@ */ #include <stdio.h> -#include <stdint.h> #include <string.h> #include <stdlib.h> #include <ctype.h> Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/buspirate_spi.c Wed Oct 6 04:56:44 2010 (r1196) @@ -18,7 +18,6 @@ */ #include <stdio.h> -#include <stdint.h> #include <string.h> #include <stdlib.h> #include <ctype.h> Modified: trunk/cbtable.c ============================================================================== --- trunk/cbtable.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/cbtable.c Wed Oct 6 04:56:44 2010 (r1196) @@ -25,7 +25,6 @@ #include <unistd.h> #include <stdio.h> #include <stdlib.h> -#include <sys/types.h> #include <string.h> #include "flash.h" #include "programmer.h" Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/chipset_enable.c Wed Oct 6 04:56:44 2010 (r1196) @@ -29,7 +29,6 @@ #include <stdlib.h> #include <string.h> -#include <sys/types.h> #include <unistd.h> #include "flash.h" #include "programmer.h" Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/cli_classic.c Wed Oct 6 04:56:44 2010 (r1196) @@ -23,7 +23,6 @@ #include <stdio.h> #include <fcntl.h> -#include <sys/types.h> #include <sys/stat.h> #include <string.h> #include <stdlib.h> Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/dummyflasher.c Wed Oct 6 04:56:44 2010 (r1196) @@ -21,7 +21,6 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> -#include <sys/types.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/ft2232_spi.c Wed Oct 6 04:56:44 2010 (r1196) @@ -21,7 +21,6 @@ #if CONFIG_FT2232_SPI == 1 #include <stdio.h> -#include <stdint.h> #include <string.h> #include <stdlib.h> #include <ctype.h> Modified: trunk/gfxnvidia.c ============================================================================== --- trunk/gfxnvidia.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/gfxnvidia.c Wed Oct 6 04:56:44 2010 (r1196) @@ -20,7 +20,6 @@ #include <stdlib.h> #include <string.h> -#include <sys/types.h> #include "flash.h" #include "programmer.h" Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/hwaccess.h Wed Oct 6 04:56:44 2010 (r1196) @@ -252,7 +252,6 @@ #define iopl amd64_iopl #endif #endif - #include <stdint.h> static inline void outb(uint8_t value, uint16_t port) { Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/internal.c Wed Oct 6 04:56:44 2010 (r1196) @@ -18,10 +18,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <stdint.h> #include <string.h> #include <stdlib.h> -#include <sys/types.h> #include "flash.h" #include "programmer.h" Modified: trunk/mcp6x_spi.c ============================================================================== --- trunk/mcp6x_spi.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/mcp6x_spi.c Wed Oct 6 04:56:44 2010 (r1196) @@ -25,7 +25,6 @@ #if defined(__i386__) || defined(__x86_64__) -#include <stdint.h> #include <stdlib.h> #include <ctype.h> #include "flash.h" Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/pcidev.c Wed Oct 6 04:56:44 2010 (r1196) @@ -20,7 +20,6 @@ #include <stdlib.h> #include <string.h> -#include <sys/types.h> #include "flash.h" #include "programmer.h" Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/physmap.c Wed Oct 6 04:56:44 2010 (r1196) @@ -22,7 +22,6 @@ #include <unistd.h> #include <stdio.h> -#include <sys/types.h> #include <stdlib.h> #include <string.h> #include "flash.h" @@ -135,8 +134,6 @@ } #elif defined(__DARWIN__) -#include <DirectIO/darwinio.h> - #define MEM_DEV "DirectIO" static void *sys_physmap(unsigned long phys_addr, size_t len) Modified: trunk/serial.c ============================================================================== --- trunk/serial.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/serial.c Wed Oct 6 04:56:44 2010 (r1196) @@ -25,7 +25,6 @@ #include <string.h> #include <ctype.h> #include <fcntl.h> -#include <sys/types.h> #include <sys/stat.h> #include <errno.h> #include <inttypes.h> Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Wed Oct 6 01:21:51 2010 (r1195) +++ trunk/serprog.c Wed Oct 6 04:56:44 2010 (r1196) @@ -25,7 +25,6 @@ #include <string.h> #include <ctype.h> #include <fcntl.h> -#include <sys/types.h> #include <sys/socket.h> #include <arpa/inet.h> #include <netinet/in.h>

1 0

Multiple PCI devices found, typo
by Iain Paton 06 Oct '10

06 Oct '10

Hi, When testing the with a dual port nic recently I saw a small typo in the error message when flashrom finds multiple devices: Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:bb:dd.f' to explicitly select the card with the given BDF (PCI bus, device, function). From the man page it seems this should really be 'flashrom -p xxxx:pci=bb:dd.f' as the first form has no effect. Rgds, Iain

2 1

flashrom bios ecs k725a help
by I N 06 Oct '10

06 Oct '10

can someone please help me understand this from the output: No coreboot table found. sh: dmidecode: command not found dmidecode execution unsucessfull - continuing without DMI info Found ITE Super I/O, id 8705 Found chipset "SiS 735", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. i provide as requested on irc attachments of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -deV', exact name board: EliteGroup K7S5A, link to bios update: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&D… i really don't know which one to get from that page. please tell me if i can use flashrom to update my bios. thank you.

2 1

[PATCH] Mark SST49LF160C tested for erase
by Ed Swierk 06 Oct '10

06 Oct '10

I have tested the erase operation with the SST49LF160C LPC flash chip. Signed-off-by: Ed Swierk <eswierk(a)aristanetworks.com> --- Index: flashrom-0.9.2-r1057/flashchips.c =================================================================== --- flashrom-0.9.2-r1057.orig/flashchips.c +++ flashrom-0.9.2-r1057/flashchips.c @@ -4582,7 +4582,7 @@ struct flashchip flashchips[] = { .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */ .block_erasers =

2 1

[PATCH] DJGPP: Avoid leak on lowmem mapping error
by Carl-Daniel Hailfinger 06 Oct '10

06 Oct '10

DJGPP: Avoid leaking memory on lowmem mapping error. Add a clarifying comment about why low memory is never unmapped. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-djgpp_physmap_noleaks/physmap.c =================================================================== --- flashrom-djgpp_physmap_noleaks/physmap.c (Revision 1194) +++ flashrom-djgpp_physmap_noleaks/physmap.c (Arbeitskopie) @@ -56,6 +56,8 @@ } if (__djgpp_map_physical_memory(realmem_map, (1024 * 1024), 0)) { + free(realmem_map); + realmem_map = NULL; return ERROR_PTR; } @@ -95,7 +97,9 @@ { __dpmi_meminfo mi; - /* we ignore unmaps for our first 1MB */ + /* There is no known way to unmap the first 1 MB. The DPMI server will + * do this for us on exit. + */ if ((virt_addr >= realmem_map) && ((virt_addr + len) <= (realmem_map + (1024 * 1024)))) { return; } -- http://www.hailfinger.org/

1 1

[commit] r1195 - trunk
by repository service 06 Oct '10

06 Oct '10

Author: hailfinger Date: Wed Oct 6 01:21:51 2010 New Revision: 1195 URL: http://flashrom.org/trac/flashrom/changeset/1195 Log: DJGPP: Avoid leaking memory on lowmem mapping error. Add a clarifying comment about why low memory is never unmapped. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Rudolf Marek <r.marek(a)assembler.cz> Modified: trunk/physmap.c Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Wed Oct 6 00:29:08 2010 (r1194) +++ trunk/physmap.c Wed Oct 6 01:21:51 2010 (r1195) @@ -56,6 +56,8 @@ } if (__djgpp_map_physical_memory(realmem_map, (1024 * 1024), 0)) { + free(realmem_map); + realmem_map = NULL; return ERROR_PTR; } @@ -95,7 +97,9 @@ { __dpmi_meminfo mi; - /* we ignore unmaps for our first 1MB */ + /* There is no known way to unmap the first 1 MB. The DPMI server will + * do this for us on exit. + */ if ((virt_addr >= realmem_map) && ((virt_addr + len) <= (realmem_map + (1024 * 1024)))) { return; }

1 0

flash log of a LENOVO A57 - 97048HG
by Maurizio Pedrazzi 06 Oct '10

06 Oct '10

3 2

Re: [flashrom] Speedup SST 25VF032B and 25VF064C programming
by Carl-Daniel Hailfinger 06 Oct '10

06 Oct '10

Hi Helge, I'm very sorry, it seems that the patch repeatedly slipped through the cracks because patchwork didn't pick it up (application/octet-stream for the attachment may have been the reason, but that is fixed now). On 06.08.2010 15:28, Wagner, Helge (GE Intelligent Platforms) wrote: > I have tested both SST 25VF032B and SST 25VF064C on a QM57 (IbexPeak) > system and found that the reprogramming of these chips is very slow. > > So i have changed the programming engine for the 25VF064C from > "spi_chip_write_1" to "spi_chip_write_256". > I have tested the 25VF064C with the new engine and it works fine. > > For the 25VF032B i have changed the programming engine from > "spi_chip_write_1" to "spi_aai_write". > I have tested this engine, too, and found it working (speedup was from > 228 to 113 seconds). > > While testing i found that some commands needed by some of the > algorithms are not in the OPCODE table. So i have implemented the > on-the-fly reprogramming of the OPCODE table (in the ICH engine). > > Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> > > Speedup for new 25VF032B programming algorithm: from 3091 [sic!] to 123 > seconds > This patch is a huge step forward for many Intel chipsets. Thank you! > diff -urN flashrom-0.9.2/ichspi.c flashrom/ichspi.c > --- flashrom-0.9.2/ichspi.c 2010-07-28 00:41:39.000000000 +0200 > +++ flashrom/ichspi.c 2010-08-06 14:46:47.000000000 +0200 > @@ -708,11 +777,11 @@ > /* find cmd in opcodes-table */ > opcode_index = find_opcode(curopcodes, cmd); > if (opcode_index == -1) { > - /* FIXME: Reprogram opcodes if possible. Autodetect type of > - * opcode by checking readcnt/writecnt. > - */ > - msg_pdbg("Invalid OPCODE 0x%02x\n", cmd); > - return SPI_INVALID_OPCODE; > + opcode_index = reprogram_opcode_on_the_fly(cmd, writecnt, readcnt); > This line should be conditional on !ichspi_lock. I have changed that in the commit. > + if (opcode_index == -1) { > + msg_pdbg("Invalid OPCODE 0x%02x\n", cmd); > + return SPI_INVALID_OPCODE; > + } > } > > opcode = &(curopcodes->opcode[opcode_index]); > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> ICH dynamic opcode reprogramming patch committed in r1193. AAI write for SST25VF032B and page write for SST25VF064C committed in r1194. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[commit] r1194 - trunk
by repository service 06 Oct '10

06 Oct '10

Author: hailfinger Date: Wed Oct 6 00:29:08 2010 New Revision: 1194 URL: http://flashrom.org/trac/flashrom/changeset/1194 Log: Use AAI write for SST SST25VF032B. Speedup from 228 to 113 seconds. Use page (256 byte) write for SST SST25VF064C. Speedup from 3091 to 123 seconds. Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/spi25.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Wed Oct 6 00:06:05 2010 (r1193) +++ trunk/chipdrivers.h Wed Oct 6 00:29:08 2010 (r1194) @@ -63,7 +63,8 @@ int spi_nbyte_read(int addr, uint8_t *bytes, int len); int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_aai_write_new(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_aai_write(struct flashchip *flash, uint8_t *buf); /* 82802ab.c */ uint8_t wait_82802ab(chipaddr bios); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Oct 6 00:06:05 2010 (r1193) +++ trunk/flashchips.c Wed Oct 6 00:29:08 2010 (r1194) @@ -4860,7 +4860,7 @@ .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4883,7 +4883,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, + .write = spi_aai_write, .read = spi_chip_read, }, @@ -4918,7 +4918,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, + .write = spi_chip_write_256, .read = spi_chip_read, }, Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed Oct 6 00:06:05 2010 (r1193) +++ trunk/spi25.c Wed Oct 6 00:29:08 2010 (r1194) @@ -1300,7 +1300,7 @@ return spi_chip_write_1_new(flash, buf, 0, flash->total_size * 1024); } -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_aai_write_new(struct flashchip *flash, uint8_t *buf, int start, int len) { uint32_t pos = start; int result; @@ -1391,3 +1391,17 @@ spi_write_disable(); return 0; } + +int spi_aai_write(struct flashchip *flash, uint8_t *buf) +{ + /* Erase first */ + msg_cinfo("Erasing flash before programming... "); + if (erase_flash(flash)) { + msg_cerr("ERASE FAILED!\n"); + return -1; + } + msg_cinfo("done.\n"); + + return spi_aai_write_new(flash, buf, 0, flash->total_size * 1024); +} +

1 0

Flashrom Tutorial
by Kyle Wood 06 Oct '10

06 Oct '10

I am Interested in exploring the uses of this software with my Bus Pirate. Have you made a tutorial for using this? I have looked over the Wiki and have found no explanation on how to use this and a severe lack of documentation. A valid tutorial would really help the vast majority of potential users and donators. Sincerely, Kyle D Wood

1 0

[commit] r1193 - trunk
by repository service 06 Oct '10

06 Oct '10

Author: hailfinger Date: Wed Oct 6 00:06:05 2010 New Revision: 1193 URL: http://flashrom.org/trac/flashrom/changeset/1193 Log: Implement on-the-fly reprogramming of the ICH SPI OPCODE table. Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ichspi.c Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Tue Oct 5 23:48:43 2010 (r1192) +++ trunk/ichspi.c Wed Oct 6 00:06:05 2010 (r1193) @@ -30,6 +30,7 @@ * ST M25P32 already tested * ST M25P64 * AT 25DF321 already tested + * ... and many more SPI flash devices * */ @@ -197,8 +198,76 @@ } }; +/* List of opcodes with their corresponding spi_type + * It is used to reprogram the chipset OPCODE table on-the-fly if an opcode + * is needed which is currently not in the chipset OPCODE table + */ +static OPCODE POSSIBLE_OPCODES[] = { + {JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Write Byte + {JEDEC_READ, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Data + {JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Erase Sector + {JEDEC_RDSR, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read Device Status Reg + {JEDEC_REMS, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Electronic Manufacturer Signature + {JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Write Status Register + {JEDEC_RDID, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read JDEC ID + {JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Bulk erase + {JEDEC_SE, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Sector erase + {JEDEC_BE_52, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 0}, // Block erase + {JEDEC_AAI_WORD_PROGRAM, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 0}, // Auto Address Increment +}; + static OPCODES O_EXISTING = {}; +static uint8_t lookup_spi_type(uint8_t opcode) +{ + int a; + + for (a = 0; a < sizeof(POSSIBLE_OPCODES)/sizeof(POSSIBLE_OPCODES[0]); a++) { + if (POSSIBLE_OPCODES[a].opcode == opcode) + return POSSIBLE_OPCODES[a].spi_type; + } + + return 0xFF; +} + +static int reprogram_opcode_on_the_fly(uint8_t opcode, unsigned int writecnt, unsigned int readcnt) +{ + uint8_t spi_type; + + spi_type = lookup_spi_type(opcode); + if (spi_type > 3) { + /* Try to guess spi type from read/write sizes. + * The following valid writecnt/readcnt combinations exist: + * writecnt = 4, readcnt >= 0 + * writecnt = 1, readcnt >= 0 + * writecnt >= 4, readcnt = 0 + * writecnt >= 1, readcnt = 0 + * writecnt >= 1 is guaranteed for all commands. + */ + if (readcnt == 0) + /* if readcnt=0 and writecount >= 4, we don't know if it is WRITE_NO_ADDRESS + * or WRITE_WITH_ADDRESS. But if we use WRITE_NO_ADDRESS and the first 3 data + * bytes are actual the address, they go to the bus anyhow + */ + spi_type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + else if (writecnt == 1) // and readcnt is > 0 + spi_type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + else if (writecnt == 4) // and readcnt is > 0 + spi_type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + // else we have an invalid case, will be handled below + } + if (spi_type <= 3) { + int oppos=2; // use original JEDEC_BE_D8 offset + curopcodes->opcode[oppos].opcode = opcode; + curopcodes->opcode[oppos].spi_type = spi_type; + program_opcodes(curopcodes); + oppos = find_opcode(curopcodes, opcode); + msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos); + return oppos; + } + return -1; +} + static int find_opcode(OPCODES *op, uint8_t opcode) { int a; @@ -710,11 +779,12 @@ /* find cmd in opcodes-table */ opcode_index = find_opcode(curopcodes, cmd); if (opcode_index == -1) { - /* FIXME: Reprogram opcodes if possible. Autodetect type of - * opcode by checking readcnt/writecnt. - */ - msg_pdbg("Invalid OPCODE 0x%02x\n", cmd); - return SPI_INVALID_OPCODE; + if (!ichspi_lock) + opcode_index = reprogram_opcode_on_the_fly(cmd, writecnt, readcnt); + if (opcode_index == -1) { + msg_pdbg("Invalid OPCODE 0x%02x\n", cmd); + return SPI_INVALID_OPCODE; + } } opcode = &(curopcodes->opcode[opcode_index]); @@ -827,21 +897,10 @@ * No need to bother with fixups. */ if (!ichspi_lock) { - msg_pdbg("%s: FIXME: Add on-the-fly" - " reprogramming of the " - "chipset opcode list.\n", - __func__); - /* FIXME: Reprogram opcode menu. - * Find a less-useful opcode, replace it - * with the wanted opcode, detect optype - * and reprogram the opcode menu. - * Update oppos so the next if-statement - * can do something useful. - */ - //curopcodes.opcode[lessusefulindex] = (cmds + 1)->writearr[0]); - //update_optypes(curopcodes); - //program_opcodes(curopcodes); - //oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]); + oppos = reprogram_opcode_on_the_fly((cmds + 1)->writearr[0], (cmds + 1)->writecnt, (cmds + 1)->readcnt); + if (oppos == -1) + continue; + curopcodes->opcode[oppos].atomic = preoppos + 1; continue; } }

1 0

[PATCH] Add a board-enable for the ASRock K7S41, chipset-enable for SiS 741
by Uwe Hermann 05 Oct '10

05 Oct '10

See patch. I literally guessed this board-enable and was lucky at the very first try :) Not sure if DMI matching is required (I guess it is), please let me know if I should change that. lspci/superiotool/flashrom -w are attached. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

3 3

[commit] r1192 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: uwe Date: Tue Oct 5 23:48:43 2010 New Revision: 1192 URL: http://flashrom.org/trac/flashrom/changeset/1192 Log: Add a board-enable for the ASRock K7S41, chipset-enable for SiS 741. This also adds (and marks as tested) a chipset-enable for the SiS 741. All operations successfully tested on hardware. lspci/superiotool: http://www.flashrom.org/pipermail/flashrom/2010-September/004710.html Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Oct 5 23:32:29 2010 (r1191) +++ trunk/board_enable.c Tue Oct 5 23:48:43 2010 (r1192) @@ -390,6 +390,7 @@ * - MSI KM4M-V and KM4AM-V: VIA KM400/KM400A + VT8237 * - MSI MS-6561 (745 Ultra): SiS 745 + W83697HF * - MSI MS-6787 (P4MAM-V/P4MAM-L): VIA P4M266 + VT8235 + * - ASRock K7S41: SiS 741 + SiS 963 + W83697HF */ static int w836xx_memw_enable_2e(void) { @@ -1885,6 +1886,7 @@ {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, NULL, "Albatron", "PM266A Pro", 0, OK, w836xx_memw_enable_2e}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", "Artec Group", "DBE61", 0, OK, board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, + {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41 $", NULL, NULL, "ASRock", "K7S41", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Tue Oct 5 23:32:29 2010 (r1191) +++ trunk/chipset_enable.c Tue Oct 5 23:48:43 2010 (r1192) @@ -1153,6 +1153,7 @@ {0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis540}, {0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis540}, {0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis540}, + {0x1039, 0x0741, OK, "SiS", "741", enable_flash_sis540}, {0x1039, 0x0745, OK, "SiS", "745", enable_flash_sis540}, {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Oct 5 23:32:29 2010 (r1191) +++ trunk/print.c Tue Oct 5 23:48:43 2010 (r1192) @@ -307,6 +307,7 @@ B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b", NULL), B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), + B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/MB/overview.asp?Model=M3A790GXH/128M", NULL),

1 0

[PATCH] Board enable for Dell OptiPlex GX1 (try 2)
by Mattias Mattsson 05 Oct '10

05 Oct '10

Add board enable for Dell OptiPlex GX1. This is a new version of an earlier patch. - Change matching PCI ID:s to ethernet and north bridge. - Truncate board name to "OptiPlex GX1" as this patch probably apply to the whole series (they share the same vendor BIOS download). - Add URL to print.c - Marked board as OK. This was tested with an earlier version of flashrom (r1092), but nothing has changed that affects this patch (GPO30 is still always available on PIIX4). lspci output: http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Thanks! -mattias

3 4

[commit] r1191 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: mhm Date: Tue Oct 5 23:32:29 2010 New Revision: 1191 URL: http://flashrom.org/trac/flashrom/changeset/1191 Log: Add board enable for Dell OptiPlex GX1 and mark Intel 28F002BC/BL/BV/BX-T as tested. Match on ethernet and north bridge. This is tested on an OptiPlex GX1 400L+ but will probably work for the whole GX1 series as they all share the same vendor BIOS. lspci/flashrom output http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html lspci output (OptiPlex GX1 unknown model) http://www.coreboot.org/pipermail/coreboot/2010-May/058040.html superiotool output (OptiPlex GX1 266L+) http://www.flashrom.org/pipermail/flashrom/2009-July/000207.html lspci/dmidecode output (OptiPlex GX1 266L+) http://www.coreboot.org/pipermail/coreboot/2009-July/050958.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/flashchips.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Oct 5 23:21:09 2010 (r1190) +++ trunk/board_enable.c Tue Oct 5 23:32:29 2010 (r1191) @@ -1195,6 +1195,15 @@ } /* + * Suited for: + * - Dell OptiPlex GX1 + */ +static int intel_piix4_gpo30_lower(void) +{ + return intel_piix4_gpo_set(30, 0); +} + +/* * Set a GPIO line on a given Intel ICH LPC controller. */ static int intel_ich_gpio_set(int gpio, int raise) @@ -1904,6 +1913,7 @@ {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, + {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, {0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, NULL}, Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Oct 5 23:21:09 2010 (r1190) +++ trunk/flashchips.c Tue Oct 5 23:32:29 2010 (r1191) @@ -3196,7 +3196,7 @@ .model_id = INTEL_28F002T, .total_size = 256, .page_size = 256 * 1024, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Oct 5 23:21:09 2010 (r1190) +++ trunk/print.c Tue Oct 5 23:32:29 2010 (r1191) @@ -390,6 +390,7 @@ B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), + B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),

1 0

Quickfix for broken writes on FT2232H based programmers
by Uwe Hermann 05 Oct '10

05 Oct '10

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1190 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: uwe Date: Tue Oct 5 23:21:09 2010 New Revision: 1190 URL: http://flashrom.org/trac/flashrom/changeset/1190 Log: Quickfix for broken writes on FT2232H based programmers. Not sure if this is the final/correct fix, but for now it definately fixes writes on FT2232H hardware. I have tested this on both, the DLP Design DLP-USB1232H, and the openbiosprog-spi hardware. Thanks to Joshua Roys <roysjosh(a)gmail.com> for the hint on IRC. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Tue Oct 5 22:28:36 2010 (r1189) +++ trunk/ft2232_spi.c Tue Oct 5 23:21:09 2010 (r1190) @@ -195,7 +195,7 @@ msg_perr("Unable to set latency timer\n"); } - if (ftdi_write_data_set_chunksize(ftdic, 512)) { + if (ftdi_write_data_set_chunksize(ftdic, 256)) { msg_perr("Unable to set chunk size\n"); }

1 0

[PATCH] Intel chip id fix-up (ver 3)
by Mattias Mattsson 05 Oct '10

05 Oct '10

This is a new version of an earlier patch. Make sure all chip variants are present in .name strings in flashchips.c Strip package prefix in constant names (everything before "28F"). Prefix every constant name with INTEL_ Sort intel chip constants by id. Rename the following constants to their "canonical" name: P28F400BT (0x70) -> INTEL_28F400T (28F400BV/BX/CE/CV-T) P28F400BB (0x71) -> INTEL_28F400B (28F400BV/BX/CE/CV-B) P28F004BT (0x78) -> INTEL_28F004T (28F004B5/BE/BV/BX-T) P28F004BB (0x79) -> INTEL_28F004B (28F004B5/BE/BV/BX-B) E_28F008S5 (0xA6) -> INTEL_28F008S3 (28F008S3/S5/SC) E_28F004S5 (0xA7) -> INTEL_28F004S3 (28F008S3/S5/SC) P28F001BXT (0x94) -> INTEL_28F001T (28F001BN/BX-T) P28F001BXB (0x95) -> INTEL_28F001B (28F001BN/BX-B) E_28F016S5 (0xAA) -> INTEL_28F016S3 (28F016S3/S5/SC) Also add chip ids for the following chips: 28F320J5 28F640J5 28F320J3 28F640J3 28F128J3 28F256J3 28F200BL/BV/BX/CV-T 28F200BL/BV/BX/CV-B 28F002BL/BV/BX-B 28F008BE/BV-T 28F008BE/BV-B 28F800B5/BV/CE/CV-T 28F800B5/BV/CE/CV-B 28F016SA/SV 28F008SA 28F008S3/S5/SC 28F008S3/S5/SC 28F016XS 28F010 28F512 28F256A 28F020 28F016B3-T 28F016B3-B 28F008B3-T 28F008B3-B 28F004B3-T 28F004B3-B Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 2

MSI MS-6163 Pro / Winbond W29C020C
by Mattias Mattsson 05 Oct '10

05 Oct '10

Hi, I have tested flashrom r1143 patched with board enable (raise GPO14) on an MSI MS-6163 with Winbond W29C020C flash. Probe, read, erase, write all work. Logs attached. Thanks, -mattias

2 1

[PATCH] Board enable for MSI MS-6163 (MS-6163 Pro/BX Master)
by Mattias Mattsson 05 Oct '10

05 Oct '10

Tested on an MS-6163 Pro. This board has the same DMI-string and board enable as the "BX Master". (Confirmed by downloading and taking apart the vendor BIOS.) lspci output: http://www.flashrom.org/pipermail/flashrom/2010-August/004461.html Thanks, -mattias

2 1

[commit] r1189 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: mhm Date: Tue Oct 5 22:28:36 2010 New Revision: 1189 URL: http://flashrom.org/trac/flashrom/changeset/1189 Log: Make sure all chip variants are present in .name strings in flashchips.c Strip package prefix in constant names (everything before "28F"). Prefix every constant name with INTEL_ Sort intel chip constants by ID. Rename the following constants to their "canonical" name: P28F400BT (0x70 -> INTEL_28F400T (28F400BV/BX/CE/CV-T) P28F400BB (0x71) -> INTEL_28F400B (28F400BV/BX/CE/CV-B) P28F004BT (0x78) -> INTEL_28F004T (28F004B5/BE/BV/BX-T) P28F004BB (0x79) -> INTEL_28F004B (28F004B5/BE/BV/BX-B) E_28F008S5 (0xA6) -> INTEL_28F008S3 (28F008S3/S5/SC) E_28F004S5 (0xA7) -> INTEL_28F004S3 (28F008S3/S5/SC) P28F001BXT (0x94) -> INTEL_28F001T (28F001BN/BX-T) P28F001BXB (0x95) -> INTEL_28F001B (28F001BN/BX-B) E_28F016S5 (0xAA) -> INTEL_28F016S3 (28F016S3/S5/SC) Add chip IDs for the following chips: 28F320J5 28F640J5 28F320J3 28F640J3 28F128J3 28F256J3 28F200BL/BV/BX/CV-T 28F200BL/BV/BX/CV-B 28F002BL/BV/BX-B 28F008BE/BV-T 28F008BE/BV-B 28F800B5/BV/CE/CV-T 28F800B5/BV/CE/CV-B 28F016SA/SV 28F008SA 28F008S3/S5/SC 28F008S3/S5/SC 28F016XS 28F010 28F512 28F256A 28F020 28F016B3-T 28F016B3-B 28F008B3-T 28F008B3-B 28F004B3-T 28F004B3-B Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Oct 5 21:19:48 2010 (r1188) +++ trunk/flashchips.c Tue Oct 5 22:28:36 2010 (r1189) @@ -3138,10 +3138,10 @@ { .vendor = "Intel", - .name = "28F001BX-B", + .name = "28F001BN/BX-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F001BXB, + .model_id = INTEL_28F001B, .total_size = 128, .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ .tested = TEST_UNTESTED, @@ -3164,10 +3164,10 @@ { .vendor = "Intel", - .name = "28F001BX-T", + .name = "28F001BN/BX-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F001BXT, + .model_id = INTEL_28F001T, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ .tested = TEST_UNTESTED, @@ -3190,10 +3190,10 @@ { .vendor = "Intel", - .name = "28F002BC-T", + .name = "28F002BC/BL/BV/BX-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F002BC, + .model_id = INTEL_28F002T, .total_size = 256, .page_size = 256 * 1024, .tested = TEST_UNTESTED, @@ -3217,10 +3217,10 @@ { .vendor = "Intel", - .name = "28F004S5", + .name = "28F008S3/S5/SC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = E_28F004S5, + .model_id = INTEL_28F004S3, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -3240,10 +3240,10 @@ { .vendor = "Intel", - .name = "28F004BV/BE-B", + .name = "28F004B5/BE/BV/BX-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F004BB, + .model_id = INTEL_28F004B, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, @@ -3267,10 +3267,10 @@ { .vendor = "Intel", - .name = "28F004BV/BE-T", + .name = "28F004B5/BE/BV/BX-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F004BT, + .model_id = INTEL_28F004T, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, @@ -3294,10 +3294,10 @@ { .vendor = "Intel", - .name = "28F400BV/CV/CE-B", + .name = "28F400BV/BX/CE/CV-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F400BB, + .model_id = INTEL_28F400B, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .feature_bits = FEATURE_ADDR_SHIFTED, @@ -3322,10 +3322,10 @@ { .vendor = "Intel", - .name = "28F400BV/CV/CE-T", + .name = "28F400BV/BX/CE/CV-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = P28F400BT, + .model_id = INTEL_28F400T, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .feature_bits = FEATURE_ADDR_SHIFTED, @@ -3353,7 +3353,7 @@ .name = "82802AB", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, - .model_id = I_82802AB, + .model_id = INTEL_82802AB, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, @@ -3377,7 +3377,7 @@ .name = "82802AC", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, - .model_id = I_82802AC, + .model_id = INTEL_82802AC, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Tue Oct 5 21:19:48 2010 (r1188) +++ trunk/flashchips.h Tue Oct 5 22:28:36 2010 (r1189) @@ -296,18 +296,45 @@ #define IMT_IM29F004T 0xAF #define INTEL_ID 0x89 /* Intel */ -#define I_82802AB 0xAD -#define I_82802AC 0xAC -#define E_28F004S5 0xA7 -#define E_28F008S5 0xA6 -#define E_28F016S5 0xAA -#define P28F001BXT 0x94 /* 28F001BX-T */ -#define P28F001BXB 0x95 /* 28F001BX-B */ -#define P28F002BC 0x7C /* 28F002BC-T */ -#define P28F004BT 0x78 /* 28F004BV/BE-T */ -#define P28F004BB 0x79 /* 28F004BV/BE-B */ -#define P28F400BT 0x70 /* 28F400BV/CV/CE-T */ -#define P28F400BB 0x71 /* 28F400BV/CV/CE-B */ +#define INTEL_28F320J5 0x14 +#define INTEL_28F640J5 0x15 +#define INTEL_28F320J3 0x16 +#define INTEL_28F640J3 0x17 +#define INTEL_28F128J3 0x18 +#define INTEL_28F256J3 0x1D +#define INTEL_28F400T 0x70 /* 28F400BV/BX/CE/CV-T */ +#define INTEL_28F400B 0x71 /* 28F400BV/BX/CE/CV-B */ +#define INTEL_28F200T 0x74 /* 28F200BL/BV/BX/CV-T */ +#define INTEL_28F200B 0x75 /* 28F200BL/BV/BX/CV-B */ +#define INTEL_28F004T 0x78 /* 28F004B5/BE/BV/BX-T */ +#define INTEL_28F004B 0x79 /* 28F004B5/BE/BV/BX-B */ +#define INTEL_28F002T 0x7C /* 28F002BC/BL/BV/BX-T */ +#define INTEL_28F002B 0x7D /* 28F002BL/BV/BX-B */ +#define INTEL_28F001T 0x94 /* 28F001BN/BX-T */ +#define INTEL_28F001B 0x95 /* 28F001BN/BX-B */ +#define INTEL_28F008T 0x98 /* 28F008BE/BV-T */ +#define INTEL_28F008B 0x99 /* 28F008BE/BV-B */ +#define INTEL_28F800T 0x9C /* 28F800B5/BV/CE/CV-T */ +#define INTEL_28F800B 0x9D /* 28F800B5/BV/CE/CV-B */ +#define INTEL_28F016SV 0xA0 /* 28F016SA/SV */ +#define INTEL_28F008SA 0xA2 +#define INTEL_28F008S3 0xA6 /* 28F008S3/S5/SC */ +#define INTEL_28F004S3 0xA7 /* 28F008S3/S5/SC */ +#define INTEL_28F016XS 0xA8 +#define INTEL_28F016S3 0xAA /* 28F016S3/S5/SC */ +#define INTEL_82802AC 0xAC +#define INTEL_82802AB 0xAD +#define INTEL_28F010 0xB4 +#define INTEL_28F512 0xB8 +#define INTEL_28F256A 0xB9 +#define INTEL_28F020 0xBD +#define INTEL_28F016B3T 0xD0 /* 28F016B3-T */ +#define INTEL_28F016B3B 0xD1 /* 28F016B3-B */ +#define INTEL_28F008B3T 0xD2 /* 28F008B3-T */ +#define INTEL_28F008B3B 0xD3 /* 28F008B3-B */ +#define INTEL_28F004B3T 0xD4 /* 28F004B3-T */ +#define INTEL_28F004B3B 0xD5 /* 28F004B3-B */ + #define SHARP_LH28F008SA 0xA2 /* Sharp chip, Intel Vendor ID */ #define SHARP_LH28F008SC 0xA6 /* Sharp chip, Intel Vendor ID */

1 0

Re: [flashrom] [PATCH] RayeR speedups, variable port
by RayeR 05 Oct '10

05 Oct '10

Hi, I did some speed test on 4MB SPI flash: read: spipgm 2:41 flashrom 2:44 erase spipgm 0:21 flashrom 3:34 So you can see the read speed has improved :) Martin > > Great. Please note that the parameter changed from > > -p rayer_bitbang_spi > > to > > -p rayer_spi > > because the short form is faster to type, and users do not care at all > > about bitbanging.

3 4

[commit] r1188 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: hailfinger Date: Tue Oct 5 21:19:48 2010 New Revision: 1188 URL: http://flashrom.org/trac/flashrom/changeset/1188 Log: Speed up RayeR SPIPGM driver in flashrom by a factor of 2. Allow specification of an alternate base address with flashrom -p rayer_spi:iobase=0x278 Any base address is allowed as long as it is nonzero, below 65536 and a multiple of four. Read speed is now on par with original spipgm.exe. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested-by: Martin Rehak <rayer(a)seznam.cz> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/flashrom.8 trunk/rayer_spi.c Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Tue Oct 5 19:29:35 2010 (r1187) +++ trunk/flashrom.8 Tue Oct 5 21:19:48 2010 (r1188) @@ -397,7 +397,19 @@ (in Hz). The default is the maximum frequency of 8 MHz. .TP .BR "rayer_spi " programmer -No parameters defined yet. More information about the hardware is available at +The default I/O base address used for the parallel port is 0x378 and you can use +the optional +.B iobase +parameter to specify an alternate base I/O address with the +.sp +.B " flashrom \-p rayer_spi:iobase=baseaddr" +.sp +syntax where +.B baseaddr +is base I/O port address of the parallel port, which must be a multiple of +four. Make sure to not forget the "0x" prefix for hexadecimal port addresses. +.sp +More information about the hardware is available at http://rayer.ic.cz/elektro/spipgm.htm .SH EXIT STATUS flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem Modified: trunk/rayer_spi.c ============================================================================== --- trunk/rayer_spi.c Tue Oct 5 19:29:35 2010 (r1187) +++ trunk/rayer_spi.c Tue Oct 5 21:19:48 2010 (r1188) @@ -30,6 +30,7 @@ */ #if defined(__i386__) || defined(__x86_64__) +#include <stdlib.h> #include "flash.h" #include "programmer.h" @@ -43,45 +44,33 @@ /* Pins for slave->master direction */ #define SPI_MISO_PIN 6 -static int lpt_iobase; +static uint16_t lpt_iobase; -/* FIXME: All rayer_bitbang_set_* functions could use caching of the value - * stored at port lpt_iobase to avoid unnecessary INB. In theory, only one - * INB(lpt_iobase) would be needed on programmer init to get the initial - * value. - */ +/* Cached value of last byte sent. */ +static uint8_t lpt_outbyte; -void rayer_bitbang_set_cs(int val) +static void rayer_bitbang_set_cs(int val) { - uint8_t tmp; - - tmp = INB(lpt_iobase); - tmp &= ~(1 << SPI_CS_PIN); - tmp |= (val << SPI_CS_PIN); - OUTB(tmp, lpt_iobase); + lpt_outbyte &= ~(1 << SPI_CS_PIN); + lpt_outbyte |= (val << SPI_CS_PIN); + OUTB(lpt_outbyte, lpt_iobase); } -void rayer_bitbang_set_sck(int val) +static void rayer_bitbang_set_sck(int val) { - uint8_t tmp; - - tmp = INB(lpt_iobase); - tmp &= ~(1 << SPI_SCK_PIN); - tmp |= (val << SPI_SCK_PIN); - OUTB(tmp, lpt_iobase); + lpt_outbyte &= ~(1 << SPI_SCK_PIN); + lpt_outbyte |= (val << SPI_SCK_PIN); + OUTB(lpt_outbyte, lpt_iobase); } -void rayer_bitbang_set_mosi(int val) +static void rayer_bitbang_set_mosi(int val) { - uint8_t tmp; - - tmp = INB(lpt_iobase); - tmp &= ~(1 << SPI_MOSI_PIN); - tmp |= (val << SPI_MOSI_PIN); - OUTB(tmp, lpt_iobase); + lpt_outbyte &= ~(1 << SPI_MOSI_PIN); + lpt_outbyte |= (val << SPI_MOSI_PIN); + OUTB(lpt_outbyte, lpt_iobase); } -int rayer_bitbang_get_miso(void) +static int rayer_bitbang_get_miso(void) { uint8_t tmp; @@ -100,16 +89,49 @@ int rayer_spi_init(void) { - /* Pick a default value for now. */ - lpt_iobase = 0x378; + char *portpos = NULL; - msg_pdbg("Using port 0x%x as I/O base for parallel port access.\n", + /* Non-default port requested? */ + portpos = extract_programmer_param("iobase"); + if (portpos) { + char *endptr = NULL; + unsigned long tmp; + tmp = strtoul(portpos, &endptr, 0); + /* Port 0, port >0x10000, unaligned ports and garbage strings + * are rejected. + */ + if (!tmp || (tmp >= 0x10000) || (tmp & 0x3) || + (*endptr != '\0')) { + /* Using ports below 0x100 is a really bad idea, and + * should only be done if no port between 0x100 and + * 0xfffc works due to routing issues. + */ + msg_perr("Error: iobase= specified, but the I/O base " + "given was invalid.\nIt must be a multiple of " + "0x4 and lie between 0x100 and 0xfffc.\n"); + free(portpos); + return 1; + } else { + lpt_iobase = (uint16_t)tmp; + msg_pinfo("Non-default I/O base requested. This will " + "not change the hardware settings.\n"); + } + } else { + /* Pick a default value for the I/O base. */ + lpt_iobase = 0x378; + } + free(portpos); + + msg_pdbg("Using address 0x%x as I/O base for parallel port access.\n", lpt_iobase); get_io_perms(); - /* 1 usec halfperiod delay for now. */ - if (bitbang_spi_init(&bitbang_spi_master_rayer, 1)) + /* Get the initial value before writing to any line. */ + lpt_outbyte = INB(lpt_iobase); + + /* Zero halfperiod delay. */ + if (bitbang_spi_init(&bitbang_spi_master_rayer, 0)) return 1; buses_supported = CHIP_BUSTYPE_SPI;

1 0

Re: [flashrom] [PATCH] Board enable for GA-6IEM
by Carl-Daniel Hailfinger 05 Oct '10

05 Oct '10

Hi Konstantin, did you have time to test Michael's patch? On 04.09.2010 10:44, Michael Karcher wrote: > Reported by Konstantin <hc(a)comp.susu.ac.ru> > lspci (superiotool missing, doesn't matter for this patch) > http://www.coreboot.org/pipermail/flashrom/2010-September/004609.html > DMI is needed, as there are no usefull PCI IDs. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Michael, I didn't see a followup or test, so please mark it as untested for now. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1187 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: mkarcher Date: Tue Oct 5 19:29:35 2010 New Revision: 1187 URL: http://flashrom.org/trac/flashrom/changeset/1187 Log: Board enable for GA-6IEM Reported by Konstantin <hc(a)comp.susu.ac.ru> lspci (superiotool missing, doesn't matter for this patch) http://www.coreboot.org/pipermail/flashrom/2010-September/004609.html DMI is needed, as there are no usefull PCI IDs. (no test of that board yet, thus marked as untested) Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Oct 5 15:31:12 2010 (r1186) +++ trunk/board_enable.c Tue Oct 5 19:29:35 2010 (r1187) @@ -1482,6 +1482,7 @@ /* * Suited for: + * - GIGABYTE GA-6IEM: Intel Socket370 + i815 + ICH2 * - GIGABYTE GA-8IRML: Intel Socket478 + i845 + ICH2 */ static int intel_ich_gpio25_raise(void) @@ -1909,6 +1910,7 @@ {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", 0, NT, intel_piix4_gpo22_raise}, + {0x8086, 0x2443, 0x8086, 0x2442, 0x8086, 0x1130, 0x8086, 0x1130, "^6IEM ", NULL, NULL, "GIGABYTE", "GA-6IEM", 0, NT, intel_ich_gpio25_raise}, {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Oct 5 15:31:12 2010 (r1186) +++ trunk/print.c Tue Oct 5 19:29:35 2010 (r1187) @@ -410,6 +410,7 @@ B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), + B("GIGABYTE", "GA-6IEM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL), B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), B("GIGABYTE", "GA-MA785GMT-UD2H", 1, "http://www.gigabyte.de/Products/Motherboard/Products_Overview.aspx?ProductI…", NULL), B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272#ov", NULL),

1 0

Fwd: flashrom on Intel Nics,
by Idwer Vollering 05 Oct '10

05 Oct '10

---------- Forwarded message ---------- From: Iain <selsinork(a)gmail.com> Date: 2010/9/29 Subject: flashrom on Intel Nics, To: Idwer Vollering <vidwer(a)gmail.com> Hi, So I have a couple of other intel nics that I've been trying with your flashrom driver, if you're interested in the results... root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi -VV flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1019 us, 10000 myus = 10032 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82540EM Gigabit Ethernet Controller" (8086:100e, BDF 06:01.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L05PT, 64 KB: and it hangs there seemingly indefinately, or at least 10mins which is as long as I've been bothered to wait.. The card has an Atmel 25F1024N which I gather from the flashrom source probably isn't supported as it may not have a device id, but the hang was unexpected. root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi:pci=01:00.0 -VV flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1019 us, 10000 myus = 10023 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82571EB Gigabit Ethernet Controller" (8086:105e, BDF 01:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L05PT, 64 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L05PU, 64 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L10PT, 128 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L10PU, 128 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L20PT, 256 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L20PU, 256 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L40PT, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L40PU, 512 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L80P, 1024 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L16PT, 2048 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L16PU, 2048 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L020, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L080, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L016, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25L032, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A25LQ032, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF081A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25DQ161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25F512B, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT25FS040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF041, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT26F004, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Bright BM29F040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EMST F25L008A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B05T, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B10T, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B20T, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B40T, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B80T, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B16T, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B32T, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25B64T, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25D16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F05, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN25F32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon EN29F010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Hyundai HY29F040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F002BC-T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1005, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L2005, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L4005, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L1635E, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV010, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV020, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV040, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm25LV512, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF016B, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF032B, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF064C, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25VF040.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST25LF040A.RES, 512 KB: RES returned 0xff 0xff. probe_spi_res2: id1 0xff, id2 0xff Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P05.RES, 64 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P10-A, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P10.RES, 128 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P40-old, 512 KB: RDID returned 0xff 0xff 0xff. REMS returned ff ff. RES returned 0xff. probe_spi_res1: id 0xff Probing for ST M25P80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25P128, 16384 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25PX32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M25PX64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BB, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25Q80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25Q64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x10, 128 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x20, 256 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x40, 512 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x80, 1024 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x16, 2048 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x32, 4096 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W25x64, 8192 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040/P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040(F)B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040(F)C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U/N, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49F020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for AMIC unknown AMIC SPI chip, 0 KB: RDID returned 0xff 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Atmel unknown Atmel SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Eon unknown Eon SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Macronix unknown Macronix SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for PMC unknown PMC SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for SST unknown SST SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for ST unknown ST SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Sanyo unknown Sanyo SPI chip, 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Generic unknown SPI chip (RDID), 0 KB: RDID returned 0xff 0xff 0xff. RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff Probing for Generic unknown SPI chip (REMS), 0 KB: REMS returned ff ff. probe_spi_rems: id1 0xff, id2 0xff No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. So this is a dual port card, not sure which function the spi device would show up under, but the same result on both. It has an Atmel 25F1024AN, so again possibly not something that flashrom can handle anyway, but at least there's no hang this time.. Since this is a newish card I'll have a look and see if I can find one with some different SPI device, would be nice to know it works but is just the 25F1024 that's the problem here. If there's more information I can supply about either of these, or anything you'd like me to test, not a problem, just let me know. Rgds, Iain

3 2

[patch] update README
by Idwer Vollering 05 Oct '10

05 Oct '10

Update README to list al the needed rpm files [1] and update the download location of csdpmi. [1]: http://www.flashrom.org/pipermail/flashrom/2010-May/003116.html --- Index: README =================================================================== --- README (revision 1022) +++ README (working copy) @@ -85,8 +85,8 @@ Get RPMs of the cross compiler from the DJGPP site and install them: djcross-binutils-2.19.1-10ap.i386.rpm - djcross-gcc-tools-4.4.1-1ap.i686.rpm djcross-gcc-4.3.2-8ap.i686.rpm + djcrx-2.04pre_20090725-13ap.i386.rpm Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch Download and compile http://assembler.cz/flashrom/libgetopt/ Compile pciutils, see README.DJGPP for instructions. @@ -98,7 +98,7 @@ or (above settings hardcoded) make djgpp-dos You might have to add WARNERROR=no to the make command line. - To run flashrom.exe, download http://clio.rice.edu/djgpp/csdpmi7b.zip and + To run flashrom.exe, download http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure CWSDPMI.EXE is in the current directory. Installation

3 4

[commit] r1186 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: hailfinger Date: Tue Oct 5 15:31:12 2010 New Revision: 1186 URL: http://flashrom.org/trac/flashrom/changeset/1186 Log: Update README to list all the needed rpm files for DOS cross-compilation and update the download location of cwsdpmi. Signed-off-by: Idwer Vollering <vidwer+flashrom(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/README Modified: trunk/README ============================================================================== --- trunk/README Tue Oct 5 13:16:14 2010 (r1185) +++ trunk/README Tue Oct 5 15:31:12 2010 (r1186) @@ -94,8 +94,8 @@ Get RPMs of the cross compiler from the DJGPP site and install them: djcross-binutils-2.19.1-10ap.i386.rpm - djcross-gcc-tools-4.4.1-1ap.i686.rpm djcross-gcc-4.3.2-8ap.i686.rpm + djcrx-2.04pre_20090725-13ap.i386.rpm Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch Download and compile http://assembler.cz/flashrom/libgetopt/ Compile pciutils, see README.DJGPP for instructions. @@ -107,8 +107,9 @@ or (above settings hardcoded) make djgpp-dos You might have to add WARNERROR=no to the make command line. - To run flashrom.exe, download http://clio.rice.edu/djgpp/csdpmi7b.zip and - make sure CWSDPMI.EXE is in the current directory. + To run flashrom.exe, download and unpack + http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure + CWSDPMI.EXE is in the current directory. Installation ------------

1 0

PM8PM-IL bios
by Shahar Or 05 Oct '10

05 Oct '10

Dear ones, The MSI PM8PM-IL motherboard has been tested. Product page: http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=233 It boots. Attached is my terminal session with flashrom v0.9.1-r94 in shahar@shahar-desktop:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.1 LTS Release: 10.04 Codename: lucid shahar@shahar-desktop:~$ uname -a Linux shahar-desktop 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 GNU/Linux Blessings, Shahar

1 0

Success Report Winbond W25x10 on Intel NIC
by Iain 05 Oct '10

05 Oct '10

Was quite interested to see the recently added Intel NIC support since I really dislike ibautil. Disappointed to find it didn't support my NIC though. Anyway, I added the id for my nic and it's able to write to this currently untested Winbond 25x10 as well. Hope the info is useful. Rgds, Iain -- ~/flashrom# ./flashrom -p nicintel_spi flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. root@p7fe-64:~/flashrom# ./flashrom -p nicintel_spi -Vr org.bin flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1785M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1019 us, 10000 myus = 100 21 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x10, id2 0x10 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Chip status register is 00 Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x10 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. # flashrom/flashrom -p nicintel_spi -Vw ipxe.mrom flashrom v0.9.2-r1182 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1784M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1026 us, 10000 myus = 100 22 us, 4 myus = 4 us, OK. Initializing nicintel_spi programmer Found "Intel 82572EI Gigabit Ethernet Controller" (8086:10b9, BDF 03:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x10, id2 0x10 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x10 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Chip status register is 00 Found chip "Winbond W25x10" (128 KB, SPI) at physical address 0xfffe0000. Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3011 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x10 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001 000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000 -0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x 011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019 fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, SUCCESS. done. Programming flash... done. COMPLETE. Verifying flash... VERIFIED. 03:00.0 Ethernet controller [0200]: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) [8086:10b9] (rev 06) Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter [8086:1083] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at fbbe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fbbc0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at bc00 [size=32] Expansion ROM at fbba0000 [disabled] [size=128K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00000 Data: 40e1 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Device Serial Number Kernel driver in use: e1000e Kernel modules: e1000e 00: 86 80 b9 10 07 05 10 00 06 00 00 02 08 00 00 00 10: 00 00 be fb 00 00 bc fb 01 bc 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 83 10 30: 00 00 ba fb c8 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 21 d0: 05 e0 81 00 00 00 e0 fe 00 00 00 00 e1 40 00 00 e0: 10 00 01 00 c1 0c 00 00 1f 28 1a 00 11 64 03 00 f0: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00

4 8

[commit] r1185 - trunk
by repository service 05 Oct '10

05 Oct '10

Author: hailfinger Date: Tue Oct 5 13:16:14 2010 New Revision: 1185 URL: http://flashrom.org/trac/flashrom/changeset/1185 Log: Add Intel 82571EB and 82572EI Gigabit NICs to the supported list. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Tested-by: Iain Paton <selsinork(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/nicintel_spi.c Modified: trunk/nicintel_spi.c ============================================================================== --- trunk/nicintel_spi.c Thu Sep 30 19:03:32 2010 (r1184) +++ trunk/nicintel_spi.c Tue Oct 5 13:16:14 2010 (r1185) @@ -61,7 +61,9 @@ uint8_t *nicintel_spibar; const struct pcidev_status nics_intel_spi[] = { + {PCI_VENDOR_ID_INTEL, 0x105e, OK, "Intel", "82571EB Gigabit Ethernet Controller"}, {PCI_VENDOR_ID_INTEL, 0x107c, OK, "Intel", "82541PI Gigabit Ethernet Controller"}, + {PCI_VENDOR_ID_INTEL, 0x10b9, OK, "Intel", "82572EI Gigabit Ethernet Controller"}, {}, };

1 0

[PATCH] Make Bus Pirate init more robust, speed up flashing
by Carl-Daniel Hailfinger 05 Oct '10

05 Oct '10

This is a combination of two patches. Patch 1: Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Patch 2: Thanks to Ian Lesnet for adding a new SPI mode to the Bus Pirate which is specifically designed for flashrom. It has the potential to speed up reads and writes a lot. This patch implements flashrom support for the new SPI mode in a hopefully backward compatible way. Not for merge. The Bus Pirate interface has not been finalized yet, and this patch should help testing if the interface works as designed. No significant speedups expected yet because the code still uses the old small block sizes. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_newcommands/buspirate_spi.c =================================================================== --- flashrom-buspirate_newcommands/buspirate_spi.c (Revision 1130) +++ flashrom-buspirate_newcommands/buspirate_spi.c (Arbeitskopie) @@ -22,6 +22,7 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> +#include <unistd.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" @@ -45,6 +46,8 @@ #define sp_flush_incoming(...) 0 #endif +static int buspirate_interface_version; + static int buspirate_sendrecv(unsigned char *buf, unsigned int writecnt, unsigned int readcnt) { int i, ret = 0; @@ -130,7 +133,13 @@ return ret; free(dev); - /* This is the brute force version, but it should work. */ + /* This is the brute force version, but it should work. + * It is guaranteed to fail if a previous flashrom run was aborted + * during a write with the new SPI commands in firmware v4.6 because + * that firmware may wait for up to 4096 bytes of input before + * responding to 0x00 again. The obvious workaround may cause startup + * penalties of more than one second. + */ for (i = 0; i < 19; i++) { /* Enter raw bitbang mode */ buf[0] = 0x00; @@ -141,6 +150,20 @@ /* Read any response and discard it. */ sp_flush_incoming(); } + /* USB is slow. The Bus Pirate is even slower. Apparently the flush + * action above is too fast or too early. Some stuff still remains in + * the pipe after the flush above, and one additional flush is not + * sufficient either. Use a 1.5 ms delay inside the loop to make + * mostly sure that at least one USB frame had time to arrive. + * Looping only 5 times is not sufficient and causes the + * ocassional failure. + * Folding the delay into the loop above is not reliable either. + */ + for (i = 0; i < 10; i++) { + usleep(1500); + /* Read any response and discard it. */ + sp_flush_incoming(); + } /* Enter raw bitbang mode */ buf[0] = 0x00; ret = buspirate_sendrecv(buf, 1, 5); @@ -148,6 +171,8 @@ return ret; if (memcmp(buf, "BBIO", 4)) { msg_perr("Entering raw bitbang mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); return 1; } msg_pdbg("Raw bitbang mode version %c\n", buf[4]); @@ -159,8 +184,12 @@ /* Enter raw SPI mode */ buf[0] = 0x01; ret = buspirate_sendrecv(buf, 1, 4); + if (ret) + return ret; if (memcmp(buf, "SPI", 3)) { msg_perr("Entering raw SPI mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3]); return 1; } msg_pdbg("Raw SPI mode version %c\n", buf[3]); @@ -210,6 +239,34 @@ return 1; } + /* Test combined SPI write/read, length 0. */ + buf[0] = 0x04; + buf[1] = 0; + buf[2] = 0; + buf[3] = 0; + buf[4] = 0; + ret = buspirate_sendrecv(buf, 5, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + msg_pdbg("SPI command set v2 not available, using old commands " + "present in firmware vX.Y or later\n"); + + /* FIXME: Check the error code? */ + /* We sent 4 bytes of 0x00, so we expect 4 BBIO1 responses. */ + buspirate_sendrecv(buf, 0, 4 * 5); + + /* Enter raw SPI mode again. */ + buf[0] = 0x01; + /* FIXME: Check the error code? */ + buspirate_sendrecv(buf, 1, 4); + + buspirate_interface_version = 1; + } else { + msg_pdbg("Using SPI command set v2.\n"); + buspirate_interface_version = 2; + } + buses_supported = CHIP_BUSTYPE_SPI; spi_controller = SPI_CONTROLLER_BUSPIRATE; @@ -251,12 +308,56 @@ return 0; } -int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, +int buspirate_spi_send_command_v2(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { static unsigned char *buf = NULL; int i = 0, ret = 0; + if (writecnt > 4096 || readcnt > 4096 || (readcnt + writecnt) > 4096) + return SPI_INVALID_LENGTH; + + /* 5 bytes extra for command, writelen, readlen. + * 1 byte extra for Ack/Nack. + */ + buf = realloc(buf, max(writecnt + 5, readcnt + 1)); + if (!buf) { + msg_perr("Out of memory!\n"); + exit(1); // -1 + } + + /* Combined SPI write/read. */ + buf[i++] = 0x04; + buf[i++] = (writecnt >> 8) & 0xff; + buf[i++] = writecnt & 0xff; + buf[i++] = (readcnt >> 8) & 0xff; + buf[i++] = readcnt & 0xff; + memcpy(buf + i, writearr, writecnt); + + ret = buspirate_sendrecv(buf, i + writecnt, 1 + readcnt); + + if (ret) { + msg_perr("Bus Pirate communication error!\n"); + return SPI_GENERIC_ERROR; + } + + if (buf[0] != 0x01) { + msg_perr("Protocol error while sending SPI write/read!\n"); + return SPI_GENERIC_ERROR; + } + + /* Skip Ack. */ + memcpy(readarr, buf + 1, readcnt); + + return ret; +} + +int buspirate_spi_send_command_v1(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + static unsigned char *buf = NULL; + int i = 0, ret = 0; + if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; @@ -307,6 +408,17 @@ return ret; } +int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + switch (buspirate_interface_version) { + case 2: + return buspirate_spi_send_command_v2(writecnt, readcnt, writearr, readarr); + default: + return buspirate_spi_send_command_v1(writecnt, readcnt, writearr, readarr); + } +} + int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_read_chunked(flash, buf, start, len, 12); Index: flashrom-buspirate_newcommands/serial.c =================================================================== --- flashrom-buspirate_newcommands/serial.c (Revision 1130) +++ flashrom-buspirate_newcommands/serial.c (Arbeitskopie) @@ -200,8 +200,10 @@ #else tmp = write(sp_fd, buf, writecnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port write error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty write\n"); writecnt -= tmp; @@ -221,8 +223,10 @@ #else tmp = read(sp_fd, buf, readcnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port read error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty read\n"); readcnt -= tmp; -- http://www.hailfinger.org/

2 6

flashrom: Can't mmap memory
by Pádraig Brady 04 Oct '10

04 Oct '10

This issue looks similar to this: http://www.coreboot.org/pipermail/coreboot/2009-February/044672.html Any ideas? cheers, Pádraig. # /tmp/flashrom -V -c W25x80 flashrom v0.9.2-r1182 on Linux 2.6.32.10-90.fc12.i686 (i686), built with libpci 2.2.4, GCC 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 5 usecs, 716M loops per second, 10 myus = 10 us, 100 myus = 341 us, 1000 myus = 1126 us, 10000 myus = 9809 us, 20 myus = 20 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "945GSE" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel ICH7M", enabling flash write... chipset PCI ID is 8086:27b9, 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3 Root Complex Register Block address = 0xfed1c000 GCS = 0xc20445: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x0008 (SPIS) 0x02: 0x4320 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x001430ef (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x463b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0xc79f0190 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Probing for Winbond W25x80, 1024 KB: Error accessing flash chip, 0x100000 bytes at 0xfff00000 /dev/mem mmap failed: Value too large for defined data type

3 11

[PATCH] Asus P3B-F support
by Carl-Daniel Hailfinger 04 Oct '10

04 Oct '10

Unfinished, posting to get some discussion about i2c infrastructure going. TODO: - Write i2c code - Use correct data for board enable table Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-asus_p3b_f/Makefile =================================================================== --- flashrom-asus_p3b_f/Makefile (Revision 1184) +++ flashrom-asus_p3b_f/Makefile (Arbeitskopie) @@ -171,7 +171,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' -PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o +PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o i2c.o internal.o # FIXME: The PROGRAMMER_OBJS below should only be included on x86. PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o mcp6x_spi.o NEED_PCI := yes Index: flashrom-asus_p3b_f/i2c.c =================================================================== --- flashrom-asus_p3b_f/i2c.c (Revision 0) +++ flashrom-asus_p3b_f/i2c.c (Revision 0) @@ -0,0 +1,51 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2000 Silicon Integrated System Corporation + * Copyright (C) 2005-2009 coresystems GmbH + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * Copyright (C) 2007,2008,2009 Carl-Daniel Hailfinger + * Copyright (C) 2009 Kontron Modular Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the I2C support code. Linux-only hack for now. + */ + +#include "flash.h" + +int i2c_init(int bus, int devaddr) +{ + //"i2cdetect -l"; + return 0; +} + +uint8_t i2c_read_byte(int bus, int devaddr, int dataaddr) +{ + //"i2cget -y"; + return 0xff; +} + +uint8_t i2c_write_byte(int bus, int devaddr, int dataaddr, uint8_t val) +{ + //"i2cset -y"; + return 0; +} + +int i2c_shutdown(int bus) +{ + return 0; +} Index: flashrom-asus_p3b_f/programmer.h =================================================================== --- flashrom-asus_p3b_f/programmer.h (Revision 1184) +++ flashrom-asus_p3b_f/programmer.h (Arbeitskopie) @@ -252,6 +252,12 @@ void dmi_init(void); int dmi_match(const char *pattern); +/* i2c.c */ +int i2c_init(int bus, int devaddr); +uint8_t i2c_read_byte(int bus, int devaddr, int dataaddr); +uint8_t i2c_write_byte(int bus, int devaddr, int dataaddr, uint8_t val); +int i2c_shutdown(int bus); + /* internal.c */ #if NEED_PCI == 1 struct superio { Index: flashrom-asus_p3b_f/board_enable.c =================================================================== --- flashrom-asus_p3b_f/board_enable.c (Revision 1184) +++ flashrom-asus_p3b_f/board_enable.c (Arbeitskopie) @@ -762,6 +762,41 @@ } /* + * Suited for: + * - ASUS P3B-F + * + * This is a gross hack until we have a cross-platform i2c infrastructure. + */ +static int board_asus_p3b_f(void) +{ + uint8_t bus = 0, devaddr = 0x48, dataaddr = 0x80; + uint8_t reg; + + if (i2c_init(bus, devaddr)) { + msg_perr("i2c init failed. Aborting board enable.\n"); + return 1; + } + + reg = i2c_read_byte(bus, devaddr, dataaddr); + if ((reg & ~0x08) != 0x80) { + msg_perr("Yeargh! Unexpected value at i2c bus 0x%x, dev 0x%x, " + "addr 0x%x: 0x%x\n", bus, devaddr, dataaddr, reg); + i2c_shutdown(bus); + return 1; + } + if (!(reg & 0x08)) { + msg_pdbg("Flash writes already enabled. Nothing to do.\n"); + i2c_shutdown(bus); + return 0; + } + reg &= ~0x08; + i2c_write_byte(bus, devaddr, dataaddr, reg); + + i2c_shutdown(bus); + return 0; +} + +/* * Set GPIO lines in the Broadcom HT-1000 southbridge. * * It's not a Super I/O but it uses the same index/data port method. @@ -1889,6 +1924,7 @@ {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^P2B-N$", NULL, NULL, "ASUS", "P2B-N", 0, OK, intel_piix4_gpo18_lower}, + { 0, 0, 0, 0, 0, 0, 0, 0, "^P3B-F$", NULL, NULL, "ASUS", "P3B-F", 0, OK, board_asus_p3b_f}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, -- http://www.hailfinger.org/

1 0

Intel 3420 chipset ?
by Iain Paton 02 Oct '10

02 Oct '10

Hi, Anyone had any sort of useable results with SPI on an Intel 3420 PCH ? Couldn't see anything in the list archives apart from the patches adding the ID's. Anyway, i have an Asus P7F-E with this chipset, probing seems to work, but a read fails with OPCODE 0x03 failed. I'd be interested to know if this looks like a board enable thing or something else before I start digging too deeply. Details of the board and available SPI roms attached. The superiotool output may be suspect, it detects a Winbond NCT5571D but this board actually has a Winbond W83667HG based on both what lm_sensors can detect and physical evidence laser etched into the top of the chip :) There's no WP jumper or options in the bios, but hopefully that wouldn't affect a read anyway. I've also sucessfully updated the bios through the built-in flash util which hopefully helps rule out things like the board being broken or needing a jumper. Would appreciate any advice anyone can offer. Thanks, Iain Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: P7F-E Version: Rev 1.xxG Serial Number: 123456789012345 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 <http://uk.asus.com/product.aspx?P_ID=Q7m7Z458pnOF2Oeq&templete=3> <http://www.winbond.com.tw/hq/enu/ProductAndSales/ProductLines/FlashMemory/S…> <http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Ind…> 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11) Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] #00 [0000] 00: 86 80 31 d1 00 00 10 00 11 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 83 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 80 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 90 02 01 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 e0 41 00 20 80 00 00 00 00 00 00 02 3d 39 00 a0: 00 00 41 30 00 00 00 00 c0 07 00 00 00 00 00 00 b0: 00 00 00 00 3e 00 00 00 19 00 00 00 00 00 00 00 c0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Vendor Specific Information <?> 00: 86 80 55 d1 00 00 10 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00 50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 f4 3b 00 70: 00 00 00 10 00 00 00 00 c0 07 00 00 10 00 00 00 80: 00 00 00 00 ff ff 0f 00 00 00 ff ff 0f 00 00 00 90: 00 00 00 00 00 00 00 00 20 10 04 00 1f 00 00 00 a0: 00 00 00 00 00 00 00 00 09 00 80 bf 00 00 00 00 b0: 00 00 ff ff 0f 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 ff ff 0f 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 bc 00 00 00 3c 02 00 00 00 00 00 00 fc e0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 28 20 3f 12 00 00 00 00 40 00 00 00 00 00 00 00 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Vendor Specific Information <?> 00: 86 80 56 d1 00 00 10 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00 50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 f4 3b 00 70: 00 00 00 10 00 00 00 00 c0 07 00 00 20 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bf a0: 00 00 00 00 00 00 30 01 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bf 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Vendor Specific Information <?> 00: 86 80 57 d1 00 00 10 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00 50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 f4 3b 00 70: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 00 00 80: a4 82 a0 02 50 01 aa aa a8 00 00 00 65 15 00 00 90: aa 01 00 00 24 00 00 00 08 04 00 00 22 05 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 09 00 00 00 e5 22 02 05 11 09 00 00 00 00 00 00 e0: 00 00 00 00 ff 07 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 86 80 58 d1 00 00 00 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 2c 01 14 90 e7 02 00 00 00 00 00 00 79 60 52 01 50: 00 00 00 00 00 00 00 00 43 07 00 00 f0 aa 18 00 60: 2c 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 0b 00 00 00 00 00 00 00 01 00 00 00 a0: 02 00 00 00 08 00 00 00 00 00 00 00 00 1e 02 40 b0: 01 00 00 00 01 f0 ff ff c0 20 40 00 00 f0 ff ff c0: c0 40 44 00 00 f0 ff ff 82 49 48 00 02 f0 ff ff d0: 01 00 00 00 01 00 00 00 03 40 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 86 80 50 d1 00 00 00 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 39 00 00 00 60: 88 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 90: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 90 08 38 00 10 00 00 3c 06 06 00 00 5f 00 d0: 45 0e 00 00 00 00 d1 00 00 00 00 00 81 04 01 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 38 00 10 00 00 00 00 00 66 10 11 01 66 10 11 01 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 86 80 51 d1 00 00 00 00 11 00 80 08 08 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 02 02 40 00 50: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 41 10 04 41 10 04 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbefa000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00: 86 80 3c 3b 06 01 90 02 05 20 03 0c 00 00 00 00 10: 00 a0 ef fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 83 83 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 60: 20 20 ff 07 00 00 00 00 01 00 00 00 00 00 08 80 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 80 00 11 89 0c 13 a0 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 bf f0: 00 00 00 00 88 85 8c 00 87 0f 05 08 28 17 5b 20 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c0000000-c01fffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 7, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40a1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00: 86 80 42 3b 07 05 10 00 05 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 10 10 00 20 20: 00 c0 10 c0 21 c0 31 c0 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 02 00 40: 10 80 42 01 00 80 00 00 00 00 10 00 11 4c 11 01 50: 00 00 01 10 e0 0c 3c 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 00 00 e0 fe a1 40 00 00 00 00 00 00 90: 0d a0 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 10 00 00 00 00 00 00 00 00 11 00 00 00 00 00 e0: 00 0f 00 00 06 07 08 00 33 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40a9 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00: 86 80 4a 3b 04 05 10 00 05 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 02 00 40: 10 80 42 00 00 80 00 00 00 00 10 00 11 4c 11 05 50: 00 00 01 10 60 00 04 00 00 00 40 00 00 00 00 00 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 00 00 e0 fe a9 40 00 00 00 00 00 00 90: 0d a0 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 10 00 00 00 00 00 00 00 00 11 00 00 00 00 00 e0: 00 0f 00 00 06 07 08 00 33 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c0400000-c05fffff Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40b1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00: 86 80 4c 3b 07 05 10 00 05 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 20 20 00 00 20: 40 c0 50 c0 61 c0 71 c0 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 02 00 40: 10 80 42 01 00 80 00 00 00 00 10 00 11 4c 11 06 50: 00 00 01 10 e0 0c 1c 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 00 00 e0 fe b1 40 00 00 00 00 00 00 90: 0d a0 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 10 00 00 00 00 00 00 00 00 11 00 00 00 00 00 e0: 00 0f 00 00 06 07 08 00 33 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbc00000-fbcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #7, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40b9 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00: 86 80 4e 3b 07 05 10 00 05 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 c0 c0 00 00 20: c0 fb c0 fb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 02 00 40: 10 80 42 00 00 80 00 00 00 00 10 00 11 2c 11 07 50: 40 00 11 30 60 00 04 00 00 00 48 01 00 00 00 00 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 00 00 e0 fe b9 40 00 00 00 00 00 00 90: 0d a0 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 10 00 00 00 00 00 00 00 00 11 00 00 00 00 00 e0: 00 0f 00 00 06 07 08 00 33 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40c1 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 00: 86 80 50 3b 07 05 10 00 05 00 04 06 08 00 81 00 10: 00 00 00 00 00 00 00 00 00 05 05 00 d0 d0 00 00 20: d0 fb d0 fb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0f 04 02 00 40: 10 80 42 00 00 80 00 00 00 00 10 00 11 2c 11 08 50: 40 00 11 30 60 00 04 00 00 00 48 01 00 00 00 00 60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 00 00 e0 fe c1 40 00 00 00 00 00 00 90: 0d a0 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 10 00 00 00 00 00 00 00 00 11 00 00 00 00 00 e0: 00 0f 00 00 06 07 08 00 33 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbef9000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00: 86 80 34 3b 06 01 90 02 05 20 03 0c 00 00 00 00 10: 00 90 ef fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 83 83 30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00 60: 20 20 ff 07 00 00 00 00 01 00 00 00 00 00 08 80 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 80 00 11 89 0c 13 a0 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 04 30 00 bf f0: 00 00 00 00 88 85 8c 00 87 0f 05 08 28 17 5b 20 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: faf00000-fb7fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] 00: 86 80 4e 24 07 01 10 00 a5 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 06 06 20 e0 e0 80 22 20: f0 fa 70 fb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 1a 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 10 50: 0d 00 00 00 43 10 d8 83 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00: 86 80 14 3b 07 00 10 02 05 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 83 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 80 00 00 00 01 05 00 00 10 00 00 00 50: f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 8a 85 8b 8f d0 00 00 00 80 87 80 8e f8 00 00 00 70: f8 00 f8 00 f8 00 f8 00 f8 00 f8 00 f8 00 f8 00 80: 10 00 0f 14 95 02 00 00 a1 0c 00 00 00 00 00 00 90: 00 00 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 a0: 18 06 20 00 78 00 06 00 00 45 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 33 22 11 00 67 45 00 00 c0 f0 00 00 0a 00 00 00 e0: 09 00 10 11 91 22 e4 1c 58 b7 44 58 05 88 fb 07 f0: 01 c0 d1 fe 00 00 00 00 87 0f 05 08 00 00 00 00 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:83d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 50 Region 0: I/O ports at b400 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at b880 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b480 [size=32] Region 5: Memory at fbef8000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00000 Data: 40d1 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00: 86 80 22 3b 07 04 b0 02 05 01 06 01 00 00 00 00 10: 01 b4 00 00 01 bc 00 00 81 b8 00 00 01 b8 00 00 20: 81 b4 00 00 00 80 ef fb 00 00 00 00 43 10 d9 83 30: 00 00 00 00 80 00 00 00 00 00 00 00 07 04 00 00 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 70 01 00 00 00 e0 fe d1 40 00 00 00 00 00 00 90: 60 00 3f 85 83 01 00 00 20 02 59 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 12 b0 10 00 48 00 00 00 b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:83d8] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 11 Region 0: Memory at fbef7000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 00: 86 80 30 3b 03 01 80 02 05 00 05 0c 00 00 00 00 10: 04 70 ef fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 d8 83 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 03 04 04 00 00 00 08 08 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 87 0f 05 08 00 00 00 00 04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: ASUSTeK Computer Inc. Device [1043:8369] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbce0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cc00 [size=32] Region 3: Memory at fbcdc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [a0] MSI-X: Enable+ Count=5 Masked- Vector table: BAR=3 offset=00000000 PBA: BAR=3 offset=00002000 Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Device Serial Number 00-11-22-ff-ff-33-44-55 Kernel driver in use: e1000e Kernel modules: e1000e 00: 86 80 d3 10 07 05 10 00 00 00 00 02 10 00 00 00 10: 00 00 ce fb 00 00 00 00 01 cc 00 00 00 c0 cd fb 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 69 83 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 11 00 04 80 03 00 00 00 03 20 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 0f d0: 05 e0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 a0 01 00 c1 8c 00 00 1f 28 19 00 11 1c 03 00 f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: ASUSTeK Computer Inc. Device [1043:8369] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at dc00 [size=32] Region 3: Memory at fbddc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [a0] MSI-X: Enable+ Count=5 Masked- Vector table: BAR=3 offset=00000000 PBA: BAR=3 offset=00002000 Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Device Serial Number 00-11-22-ff-ff-33-44-56 Kernel driver in use: e1000e Kernel modules: e1000e 00: 86 80 d3 10 07 05 10 00 00 00 00 02 10 00 00 00 10: 00 00 de fb 00 00 00 00 01 dc 00 00 00 c0 dd fb 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 69 83 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0f 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 11 00 04 80 03 00 00 00 03 20 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 0f d0: 05 e0 80 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 a0 01 00 c1 8c 00 00 1f 28 19 00 11 1c 03 00 f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 06:05.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 10) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8373] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 14 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=8M] Region 1: Memory at fafe0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at ec00 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 03 1a 00 20 03 00 10 02 10 00 00 03 00 00 00 00 10: 00 00 00 fb 00 00 fe fa 01 ec 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 73 83 30: 00 00 00 00 40 00 00 00 00 00 00 00 0e 01 00 00 40: 01 00 c3 ff 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 flashrom v0.9.2-r1184 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.5.0, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1718M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1018 us, 10000 myus = 10020 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P7F-E" DMI string baseboard-version: "Rev 1.xxG" DMI string chassis-type: "Desktop" Found chipset "Intel 3420", enabling flash write... chipset PCI ID is 8086:3b14, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0xb Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x000f0000 (FREG0: Flash Descriptor) 0x00000000-0x0000ffff is read-write 0x58: 0x01ff0000 (FREG1: BIOS) 0x00000000-0x001fffff is read-write 0x5C: 0x002f0010 (FREG2: Management Engine) 0x00010000-0x0002ffff is read-write 0x60: 0x00000fff (FREG3: Gigabit Ethernet) 0x00fff000-0x00000fff is read-write 0x64: 0x01ff0050 (FREG4: Platform Data) 0x00050000-0x001fffff is read-write 0x74: 0x801f8010 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0xf8414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00002008 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching enabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 0xffe00000. Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2, id2 0x14 === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. flashrom v0.9.2-r1184 on Linux 2.6.35-dt (x86_64), built with libpci 3.1.4, GCC 4.5.0, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1717M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1017 us, 10000 myus = 10012 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P7F-E" DMI string baseboard-version: "Rev 1.xxG" DMI string chassis-type: "Desktop" Found chipset "Intel 3420", enabling flash write... chipset PCI ID is 8086:3b14, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0xb Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x000f0000 (FREG0: Flash Descriptor) 0x00000000-0x0000ffff is read-write 0x58: 0x01ff0000 (FREG1: BIOS) 0x00000000-0x001fffff is read-write 0x5C: 0x002f0010 (FREG2: Management Engine) 0x00010000-0x0002ffff is read-write 0x60: 0x00000fff (FREG3: Gigabit Ethernet) 0x00fff000-0x00000fff is read-write 0x64: 0x01ff0050 (FREG4: Platform Data) 0x00050000-0x001fffff is read-write 0x74: 0x801f8010 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0xf8414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00002008 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching enabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 0xffe00000. Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xc2, id2 0xaa, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2, id2 0x14 === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... Transaction error! run OPCODE 0x03 failed FAILED. superiotool r5728 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x4000, id=0x53b3 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xb353, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond Nuvoton NCT5571D (id=0xb3, rev=0x53) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff b3 53 ff 00 40 00 00 ff 40 00 04 7f 63 00 00 43 def RR b3 NA ff 00 40 00 MM ff 20 00 00 7f 0a 08 00 MM LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 82 def 00 00 00 00 00 00 00 83 LDN 0x07 (GPIO 6, GPIO 8, GPIO 9) idx 30 e4 e5 e6 e7 e8 e9 ea eb ec ed ee f4 f5 f6 f7 f8 val 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff def 18 ef MM 00 00 ff MM 00 00 RR 00 00 ff MM 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 5) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e9 ea eb f4 f5 f6 f7 fe val 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff def 05 ff MM 00 00 ff MM 00 00 00 00 00 ff MM 00 00 00 LDN 0x0a (ACPI) idx e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe ff val 01 00 cf 00 c0 02 1c 00 09 00 fc 00 00 00 00 00 30 def 01 00 ff 00 00 02 1c 00 RR 00 7c 00 00 00 00 00 30 LDN 0x0b (Hardware monitor) idx 30 60 61 70 e0 e1 e2 e3 f0 f5 val 01 02 90 00 00 00 00 00 c1 10 def 00 00 00 00 00 00 00 00 c1 10 LDN 0x0c (PECI) idx e0 e1 e2 e3 e4 e5 e6 e8 e9 ea ec ee ef f1 f2 f3 fe ff val 10 53 48 48 48 00 00 01 ff 00 00 01 5a 4c 50 10 ee 55 def 00 48 48 48 48 00 00 00 RR 00 00 01 5a 48 50 10 80 01 LDN 0x0d (SUSLED) idx ec val 01 def 01 LDN 0x0f (GPIO Push-Pull/OD Select) idx e0 e1 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff val ff ff ff f7 cb 3f ff ff 00 fc c1 04 87 72 c7 50 f8 a2 09 5c d7 03 60 cd 95 def RR fd RR f7 cb RR ff ff 00 MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

1 0

Success Report: Intel 82571EB Gigabit Ethernet Controller with Atmel AT25FS010
by Iain Paton 02 Oct '10

02 Oct '10

Hi, Attached are sucessful logs for -Vr -Vw -VE using an Intel 82571EB (8086:105e) dual port nic that has an Atmel AT25FS010 onboard boot rom. The NIC currently being unsupported and the rom currently being untested. I apologise in advance for not sending an actual patch, having already explained the reasons for that. I hope the info is useful anyway. Rgds, Iain flashrom v0.9.2-r1184 on Linux 2.6.35-rc6-dt+ (i686), built with libpci 3.1.7, GCC 4.5.0, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2975M loops per second, 10 myus = 11 us, 100 myus = 104 us, 1000 myus = 996 us, 10000 myus = 9961 us, 4 myus = 5 us, OK. Initializing nicintel_spi programmer Found "Intel 82571EB Gigabit Ethernet Controller" (8086:105e, BDF 17:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Chip status register is 00 Found chip "Atmel AT25FS010" (128 KB, SPI) at physical address 0xfffe0000. Chip status register is 00 Chip status register: Status Register Write Protect (WPEN) is not set Chip status register: Bit 6 / Block Protect 4 (BP4) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x1f, id2 0x66 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xff, id2 0xff === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, SUCCESS. flashrom v0.9.2-r1184 on Linux 2.6.35-rc6-dt+ (i686), built with libpci 3.1.7, GCC 4.5.0, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2977M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = 9971 us, 4 myus = 5 us, OK. Initializing nicintel_spi programmer Found "Intel 82571EB Gigabit Ethernet Controller" (8086:105e, BDF 17:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Chip status register is 00 Found chip "Atmel AT25FS010" (128 KB, SPI) at physical address 0xfffe0000. Chip status register is 00 Chip status register: Status Register Write Protect (WPEN) is not set Chip status register: Bit 6 / Block Protect 4 (BP4) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x1f, id2 0x66 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xff, id2 0xff === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. flashrom v0.9.2-r1184 on Linux 2.6.35-rc6-dt+ (i686), built with libpci 3.1.7, GCC 4.5.0, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2981M loops per second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 998 us, 10000 myus = 10348 us, 4 myus = 5 us, OK. Initializing nicintel_spi programmer Found "Intel 82571EB Gigabit Ethernet Controller" (8086:105e, BDF 17:00.0). Requested BAR is MEM, 32bit, not prefetchable Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Chip status register is 00 Found chip "Atmel AT25FS010" (128 KB, SPI) at physical address 0xfffe0000. Chip status register is 00 Chip status register: Status Register Write Protect (WPEN) is not set Chip status register: Bit 6 / Block Protect 4 (BP4) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x1f, id2 0x66 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xff, id2 0xff Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040(F)B, 512 KB: skipped. Probing for Winbond W39V040(F)C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x6601 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xff, id2 0xff === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, SUCCESS. done. Programming flash... done. COMPLETE. Verifying flash... VERIFIED.

1 0

[PATCH]Updated patch to use flashrom on libpayload
by Patrick Georgi 30 Sep '10

30 Sep '10

Hi, attached patch is updated to current trunk, with some minor cleanup in the MSR routines (no need to explicitely cast to unsigned long long). With this patch, it's easier to build flashrom with libpayload, but some crucial parts are still missing, most notably the frontend. Once flashrom is a library, it will be relatively easy to use. Signed-off-by: Patrick Georgi <patrick.georgi(a)coresystems.de>

2 2

[commit] r1184 - trunk
by repository service 30 Sep '10

30 Sep '10

Author: oxygene Date: Thu Sep 30 19:03:32 2010 New Revision: 1184 URL: http://flashrom.org/trac/flashrom/changeset/1184 Log: Add support for building flashrom against libpayload. This doesn't include changes to the frontend which must be done separately, so this won't work out of the box. This code was tested on hardware. Signed-off-by: Patrick Georgi <patrick.georgi(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.c trunk/hwaccess.c trunk/hwaccess.h trunk/layout.c trunk/physmap.c trunk/udelay.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/flashrom.c Thu Sep 30 19:03:32 2010 (r1184) @@ -22,9 +22,11 @@ */ #include <stdio.h> -#include <fcntl.h> #include <sys/types.h> +#ifndef __LIBPAYLOAD__ +#include <fcntl.h> #include <sys/stat.h> +#endif #include <string.h> #include <stdlib.h> #include <getopt.h> Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/hwaccess.c Thu Sep 30 19:03:32 2010 (r1184) @@ -22,9 +22,11 @@ #include <string.h> #include <stdlib.h> #include <sys/types.h> -#if !defined (__DJGPP__) +#if !defined (__DJGPP__) && !defined(__LIBPAYLOAD__) #include <unistd.h> #include <fcntl.h> +#endif +#if !defined (__DJGPP__) #include <errno.h> #endif #include "flash.h" @@ -44,7 +46,7 @@ void get_io_perms(void) { -#if defined(__DJGPP__) +#if defined(__DJGPP__) || defined(__LIBPAYLOAD__) /* We have full permissions by default. */ return; #else Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/hwaccess.h Thu Sep 30 19:03:32 2010 (r1184) @@ -292,7 +292,7 @@ #endif #endif -#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) +#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); int wrmsr(int addr, msr_t msr); @@ -307,6 +307,16 @@ msr_t freebsd_rdmsr(int addr); int freebsd_wrmsr(int addr, msr_t msr); #endif +#if defined(__LIBPAYLOAD__) +#include <arch/io.h> +#include <arch/msr.h> +typedef struct { uint32_t hi, lo; } msr_t; +msr_t libpayload_rdmsr(int addr); +int libpayload_wrmsr(int addr, msr_t msr); +#undef rdmsr +#define rdmsr libpayload_rdmsr +#define wrmsr libpayload_wrmsr +#endif #elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__) Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/layout.c Thu Sep 30 19:03:32 2010 (r1184) @@ -134,6 +134,7 @@ } #endif +#ifndef __LIBPAYLOAD__ int read_romlayout(char *name) { FILE *romlayout; @@ -181,6 +182,7 @@ return 0; } +#endif int find_romentry(char *name) { Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/physmap.c Thu Sep 30 19:03:32 2010 (r1184) @@ -28,7 +28,7 @@ #include "flash.h" /* Do we need any file access or ioctl for physmap or MSR? */ -#if !defined(__DJGPP__) +#if !defined(__DJGPP__) && !defined(__LIBPAYLOAD__) #include <sys/stat.h> #include <fcntl.h> #include <errno.h> @@ -104,6 +104,31 @@ __dpmi_free_physical_address_mapping(&mi); } +#elif defined(__LIBPAYLOAD__) +#include <arch/virtual.h> + +#define MEM_DEV "" + +void *sys_physmap(unsigned long phys_addr, size_t len) +{ + return (void*)phys_to_virt(phys_addr); +} + +#define sys_physmap_rw_uncached sys_physmap +#define sys_physmap_ro_cached sys_physmap + +void physunmap(void *virt_addr, size_t len) +{ +} + +int setup_cpu_msr(int cpu) +{ + return 0; +} + +void cleanup_cpu_msr(void) +{ +} #elif defined(__DARWIN__) #include <DirectIO/darwinio.h> @@ -453,6 +478,20 @@ { // Nothing, yet. } +#elif defined(__LIBPAYLOAD__) +msr_t libpayload_rdmsr(int addr) +{ + msr_t msr; + unsigned long long val = _rdmsr(addr); + msr.lo = val & 0xffffffff; + msr.hi = val >> 32; + return msr; +} + +int libpayload_wrmsr(int addr, msr_t msr) +{ + _wrmsr(addr, msr.lo | ((unsigned long long)msr.hi << 32)); +} #else msr_t rdmsr(int addr) { Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Thu Sep 30 01:37:24 2010 (r1183) +++ trunk/udelay.c Thu Sep 30 19:03:32 2010 (r1184) @@ -19,6 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#ifndef __LIBPAYLOAD__ + #include <unistd.h> #include <sys/time.h> #include <stdlib.h> @@ -179,3 +181,15 @@ } } +#else + +void myusec_calibrate_delay(void) +{ + get_cpu_speed(); +} + +void internal_delay(int usecs) +{ + udelay(usecs); +} +#endif

1 0

ASUS P5GDC-V Deluxe
by Emdek 30 Sep '10

30 Sep '10

Hello The main board maker is ASUS, model name is P5GDC-V Deluxe (in one place text on package says P5GDC-V DELUXE-EAYO). Here is specification and link to BIOS downloads: http://asus.com.pl/product.aspx?P_ID=JRsYCkkzvo4pVF3i Outputs of commands 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool -dV' are attached. -- Best regards, Michal

1 0

[PATCH] Loongson support
by Vladimir 'φ-coder/phcoder' Serbinenko 30 Sep '10

30 Sep '10

Support for Loongson-2F flashing. Signed-off-by: Vladimir 'phcoder' Serbinenko -- Regards Vladimir 'φ-coder/phcoder' Serbinenko

3 5

[commit] r1183 - trunk
by repository service 30 Sep '10

30 Sep '10

Author: hailfinger Date: Thu Sep 30 01:37:24 2010 New Revision: 1183 URL: http://flashrom.org/trac/flashrom/changeset/1183 Log: Support for Loongson-2F (MIPS) flashing. Signed-off-by: Vladimir 'phcoder' Serbinenko <phcoder(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/internal.c trunk/processor_enable.c Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Sun Sep 26 23:43:53 2010 (r1182) +++ trunk/internal.c Thu Sep 30 01:37:24 2010 (r1183) @@ -244,7 +244,7 @@ * The error code might have been a warning only. * Besides that, we don't check the board enable return code either. */ -#if defined(__i386__) || defined(__x86_64__) +#if defined(__i386__) || defined(__x86_64__) || defined (__mips) return 0; #else msg_perr("Your platform is not supported yet for the internal " Modified: trunk/processor_enable.c ============================================================================== --- trunk/processor_enable.c Sun Sep 26 23:43:53 2010 (r1182) +++ trunk/processor_enable.c Thu Sep 30 01:37:24 2010 (r1183) @@ -37,8 +37,59 @@ #else +#if defined (__MIPSEL__) && defined (__linux) +#include <stdio.h> +#include <string.h> +#include <ctype.h> + +static int is_loongson(void) +{ + FILE *cpuinfo; + cpuinfo = fopen("/proc/cpuinfo", "rb"); + if (!cpuinfo) + return 0; + while (!feof(cpuinfo)) { + char line[512], *ptr; + if (fgets(line, sizeof(line), cpuinfo) == NULL) + break; + ptr = line; + while (*ptr && isspace(*ptr)) + ptr++; + /* "cpu" part appears only with some Linux versions. */ + if (strncmp(ptr, "cpu", sizeof("cpu") - 1) == 0) + ptr += sizeof("cpu") - 1; + while (*ptr && isspace(*ptr)) + ptr++; + if (strncmp(ptr, "model", sizeof("model") - 1) != 0) + continue; + ptr += sizeof("model") - 1; + while (*ptr && isspace(*ptr)) + ptr++; + if (*ptr != ':') + continue; + ptr++; + while (*ptr && isspace(*ptr)) + ptr++; + fclose(cpuinfo); + return (strncmp(ptr, "ICT Loongson-2 V0.3", + sizeof("ICT Loongson-2 V0.3") - 1) == 0) + || (strncmp(ptr, "Godson2 V0.3 FPU V0.1", + sizeof("Godson2 V0.3 FPU V0.1") - 1) == 0); + } + fclose(cpuinfo); + return 0; +} +#endif + int processor_flash_enable(void) { + /* FIXME: detect loongson on FreeBSD and OpenBSD as well. */ +#if defined (__MIPSEL__) && defined (__linux) + if (is_loongson()) { + flashbase = 0x1fc00000; + return 0; + } +#endif /* Not implemented yet. Oh well. */ return 1; }

1 0

Re: [flashrom] [RFC] Online firmware upgrade in non-embedded systems
by Carl-Daniel Hailfinger 29 Sep '10

29 Sep '10

[adding flashrom(a)flashrom.org to CC, senders will be whitelisted after a short delay] On 28.09.2010 19:59, Ben Hutchings wrote: > Network and disk controllers normally have at least some firmware in > flash to support their use as boot devices. [...] > > Currently the sfc network driver is optionally combined with an MTD > driver (CONFIG_SFC_MTD) which exposes all upgradable firmware and > configuration partitions in flash. This works nicely in kernels with > MTD enabled, but since MTD is mainly used in embedded systems with > on-board flash it is often disabled in distribution kernels and custom > kernels alike. This leaves users of sfc unable to upgrade firmware > without rebuilding the kernel or booting some other distribution. The > lack of widespread MTD support is a regular cause of support requests. > > There are two main alternatives I'm aware of: > > - Use the ethtool ETHTOOL_SEEPROM [...] > > - Use the ethtool ETHTOOL_FLASHDEV command [..] > > Of course these are both specific to network devices; it seems deisrable > to have a more general convention for online firmware upgrades. MTDs > clearly are more generally applicable, and pretty much every computer > does have flash storage for firmware and boot configuration, so perhaps > it should be treated as more of a standard feature? > Given that the flashrom utility <http://www.flashrom.org/> (GPLv2) supports flashing many network cards, SATA/PATA controllers, graphics cards, and of course the main system firmware/BIOS/EFI, and it does that from userspace without any kernel support, using flashrom for those purposes makes sense IMHO. flashrom works fine under Linux 2.4, 2.6 and pretty much every other OS out there. There is a focus on x86, but MIPS, PowerPC and other architectures are supported as well. flashrom is independent of the MTD framework, so you don't need to boot a special kernel for a firmware upgrade. That said, writing a flashrom driver for your hardware is pretty easy. You could even use existing kernel code for your device as a template for the flashrom driver since the license is compatible. If you have any questions, please ask. Regards, Carl-Daniel

2 4

Firmware flashing/dumping for DVD-burners
by Mattias Mattsson 29 Sep '10

29 Sep '10

Hi, I did some googling and found some tools with functionality that maybe could be integrated into flashrom. flasher is a tool to dump/flash LG drives with Renesas chipsets. (GPLv3) git://flasher.git.sourceforge.net/gitroot/flasher/flasher http://sourceforge.net/projects/flasher/ There is source code (for OS X) to flash firmware on Matshita drives: http://forum.rpc1.org/viewtopic.php?t=42953#p207704 At one point there was source available tool to also dump firmware from Matshita drives. (Unfortunately the link referenced in this forum post has expired.) http://forum.rpc1.org/viewtopic.php?t=43046 Some other tools for dumping/flashing are listed here, most of them without source code: http://forum.rpc1.org/viewtopic.php?t=44362 -mattias

1 0

Re: [flashrom] [coreboot] [PATCH] Raw payload extraction support in cbfstool
by Carl-Daniel Hailfinger 29 Sep '10

29 Sep '10

[adding flashrom(a)flashrom.org to CC] On 28.09.2010 22:16, Aurélien wrote: > On Tue, Sep 28, 2010 at 9:55 PM, Peter Stuge <peter(a)stuge.se> wrote: >> Aurélien wrote: >> >>>>> I tried to make a patch which reads from /dev/mem directly in 2 ways: >>>>> - mmap()ing /dev/mem, but it seemed that it would be too specific a >>>>> modification to be accepted. >>>>> >>>> See http://stuge.se/physrd.c for a fairly generic tool to do this. >>>> >>> You're right, splitting the feature in two tools seems much more >>> correct. This way we can extract the ROM image, then extract the >>> specific payload. >>> >> Well, for that purpose it's much better to simply use flashrom. >> >> > Probably, but flashrom takes slighly more time due to various calibration > routines (I could not find a way to disable those, but I didn't try very > hard), If you already have a known-good delay function with microsecond precision, you could use that instead of waiting for flashrom to calibrate its own delay loop. > and is less integrable that just reading like this. I don't need much > portability between mainboards anyways. > Yes, libflashrom is still not completely done. Most of the parts are there, and we even have a bunch of different frontends, but the exported interface needs to be decided upon before we start offering libflashrom > In the general case however, you are right, the flashrom method seems much > more robust. > Thanks! Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom