- flashrom - mail.coreboot.org

[commit] r1394 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: hailfinger Date: Tue Jul 26 22:43:13 2011 New Revision: 1394 URL: http://flashrom.org/trac/flashrom/changeset/1394 Log: Increase flashrom release number to 0.9.4 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Jul 26 16:33:46 2011 (r1393) +++ trunk/Makefile Tue Jul 26 22:43:13 2011 (r1394) @@ -221,7 +221,7 @@ # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown) -RELEASE := 0.9.3 +RELEASE := 0.9.4 VERSION := $(RELEASE)-r$(SVNVERSION) RELEASENAME ?= $(VERSION)

1 0

[PATCH] flashrom 0.9.4 release
by Carl-Daniel Hailfinger 26 Jul '11

26 Jul '11

We finally have everything committed, and can now release 0.9.4 and then merge a few riskier patches. ---snip--- Increase flashrom release number to 0.9.4 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-0.9.4/Makefile =================================================================== --- flashrom-0.9.4/Makefile (Revision 1393) +++ flashrom-0.9.4/Makefile (Arbeitskopie) @@ -221,7 +221,7 @@ # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown) -RELEASE := 0.9.3 +RELEASE := 0.9.4 VERSION := $(RELEASE)-r$(SVNVERSION) RELEASENAME ?= $(VERSION) -- http://www.hailfinger.org/

3 2

Dear flashrom wiki admin
by Stefan Tauner 26 Jul '11

26 Jul '11

hey this was ignored multiple times on IRC, so i hope i have more luck here. i am not sure who has enough rights to do this, so sorry, if this is spam for you. i'd like to add linked footnotes into print_wiki.c which use a mediawiki extension (the one you probably know from wikipedia): http://www.mediawiki.org/wiki/Extension:Cite usage docs: http://meta.wikimedia.org/wiki/Help:Footnotes right now we just print superscript numbers without links to the real notes below the tables. i could hack those in manually too, but i think the extension is probably a better idea? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [PATCH] fix counting of supported chips in the wiki output
by Stefan Tauner 26 Jul '11

26 Jul '11

On Tue, 26 Jul 2011 03:12:03 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > 2. tested stuff patch, or was acked on IRC by carldani (thanks) and committed with other small fixes in r1393. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1393 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: stefanct Date: Tue Jul 26 16:33:46 2011 New Revision: 1393 URL: http://flashrom.org/trac/flashrom/changeset/1393 Log: add a bunch of new/tested stuff and various small changes 6 - add J-7BXAN to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007397.html - fix urls, typos, whitespace etc. - fix counting of supported chips in the wiki output Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> the last one is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> everything else is Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.c trunk/print.c trunk/print_wiki.c trunk/spi.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Tue Jul 26 16:28:35 2011 (r1392) +++ trunk/flashrom.c Tue Jul 26 16:33:46 2011 (r1393) @@ -1713,7 +1713,7 @@ msg_gerr("Programmer table miscompilation!\n"); ret = 1; } - /* It would be favorable if we could also check for correct terminaion + /* It would be favorable if we could also check for correct termination * of the following arrays, but we don't know their sizes in here... * For 'flashchips' we check the first element to be non-null. In the * other cases there exist use cases where the first element can be Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Jul 26 16:28:35 2011 (r1392) +++ trunk/print.c Tue Jul 26 16:33:46 2011 (r1393) @@ -516,7 +516,7 @@ B("EPoX", "EP-9NPA7I", 0, "http://www.epox.com/product.asp?ID=EP-9NPA7I", "Needs a patch (http://patchwork.coreboot.org/patch/2125/) and the same board enable as the EP-8NPA7I."), B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), - B("EVGA", "132-CK-NF78", 1, "http://http://www.evga.com/articles/385.asp", NULL), + B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL), B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), @@ -580,7 +580,8 @@ B("Intel", "Greencity", 1, NULL, "Intel reference board."), B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), - B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4…", NULL), + B("Jetway", "J-7BXAN", 1, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL), + B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), B("Lanner", "EM-8510C", 1, NULL, NULL), B("Lex", "CV700A", 1, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), @@ -602,7 +603,7 @@ B("MSI", "MS-7005 (651M-L)", 1, "http://www.msi.com/product/mb/651M-L.html", NULL), B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL), B("MSI", "MS-7046", 1, "http://www.heimir.de/ms7046/", NULL), - B("MSI", "MS-7061 (KM3M-V/KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), + B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL), Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Tue Jul 26 16:28:35 2011 (r1392) +++ trunk/print_wiki.c Tue Jul 26 16:33:46 2011 (r1393) @@ -205,8 +205,12 @@ uint32_t t; char *s; - for (f = flashchips; f->name != NULL; f++) + for (f = flashchips; f->name != NULL; f++) { + /* Don't count "unknown XXXX SPI chip" entries. */ + if (!strncmp(f->name, "unknown", 7)) + continue; chipcount++; + } printf("\n== Supported chips ==\n\nTotal amount of supported " "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n" Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Tue Jul 26 16:28:35 2011 (r1392) +++ trunk/spi.c Tue Jul 26 16:33:46 2011 (r1393) @@ -196,4 +196,4 @@ { spi_programmer = pgm; buses_supported |= CHIP_BUSTYPE_SPI; -} \ No newline at end of file +}

1 0

[commit] r1392 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: stefanct Date: Tue Jul 26 16:28:35 2011 New Revision: 1392 URL: http://flashrom.org/trac/flashrom/changeset/1392 Log: Fix output of erase_and_write_flash and surroundings see http://www.flashrom.org/pipermail/flashrom/2011-July/007220.html for a discussion about the details. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Tue Jul 26 16:18:52 2011 (r1391) +++ trunk/flashrom.c Tue Jul 26 16:28:35 2011 (r1392) @@ -1471,7 +1471,6 @@ start + len - 1); if (do_something(flash, start, len, param1, param2, eraser.block_erase)) { - msg_cdbg("\n"); return 1; } start += len; @@ -1522,19 +1521,18 @@ memcpy(curcontents, oldcontents, size); for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { + if (k != 0) + msg_cdbg("Looking for another erase function.\n"); if (!usable_erasefunctions) { msg_cdbg("No usable erase functions left.\n"); break; } - msg_cdbg("Looking at blockwise erase function %i... ", k); - if (check_block_eraser(flash, k, 1)) { - msg_cdbg("Looking for another erase function.\n"); + msg_cdbg("Trying erase function %i... ", k); + if (check_block_eraser(flash, k, 1)) continue; - } usable_erasefunctions--; - msg_cdbg("trying... "); - ret = walk_eraseregions(flash, k, &erase_and_write_block_helper, curcontents, newcontents); - msg_cdbg("\n"); + ret = walk_eraseregions(flash, k, &erase_and_write_block_helper, + curcontents, newcontents); /* If everything is OK, don't try another erase function. */ if (!ret) break; @@ -1544,14 +1542,19 @@ */ if (!usable_erasefunctions) continue; + /* Reading the whole chip may take a while, inform the user even + * in non-verbose mode. + */ + msg_cinfo("Reading current flash chip contents... "); if (flash->read(flash, curcontents, 0, size)) { /* Now we are truly screwed. Read failed as well. */ - msg_cerr("Can't read anymore!\n"); + msg_cerr("Can't read anymore! Aborting.\n"); /* We have no idea about the flash chip contents, so * retrying with another erase function is pointless. */ break; } + msg_cinfo("done. "); } /* Free the scratchpad. */ free(curcontents); @@ -1559,7 +1562,7 @@ if (ret) { msg_cerr("FAILED!\n"); } else { - msg_cinfo("Done.\n"); + msg_cinfo("Erase/write done.\n"); } return ret; } @@ -1938,13 +1941,13 @@ * preserved, but in that case we might perform unneeded erase which * takes time as well. */ - msg_cdbg("Reading old flash chip contents... "); + msg_cinfo("Reading old flash chip contents... "); if (flash->read(flash, oldcontents, 0, size)) { ret = 1; - msg_cdbg("FAILED.\n"); + msg_cinfo("FAILED.\n"); goto out; } - msg_cdbg("done.\n"); + msg_cinfo("done.\n"); // This should be moved into each flash part's code to do it // cleanly. This does the job.

1 0

[commit] r1391 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: hailfinger Date: Tue Jul 26 16:18:52 2011 New Revision: 1391 URL: http://flashrom.org/trac/flashrom/changeset/1391 Log: Fix Winbond W29EE011, W29EE012, W29C010M, W29C011A probing. According to the datasheets probe_w29ee011 is the only valid probe function for those chips, but we have reports where those chips were only detected with probe_jedec, and thus we assume that our datasheets only cover an earlier stepping. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/w29ee011.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Jul 26 02:54:42 2011 (r1390) +++ trunk/flashchips.c Tue Jul 26 16:18:52 2011 (r1391) @@ -8252,6 +8252,29 @@ { .vendor = "Winbond", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W29C010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PRE, + .probe = probe_w29ee011, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + }, + + {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ + .vendor = "Winbond", .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, @@ -8322,29 +8345,6 @@ }, { - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", - .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_w29ee011, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - { .vendor = "Winbond", .name = "W39L040", .bustype = CHIP_BUSTYPE_PARALLEL, Modified: trunk/w29ee011.c ============================================================================== --- trunk/w29ee011.c Tue Jul 26 02:54:42 2011 (r1390) +++ trunk/w29ee011.c Tue Jul 26 16:18:52 2011 (r1391) @@ -22,16 +22,19 @@ #include "flash.h" #include "chipdrivers.h" +/* According to the Winbond W29EE011, W29EE012, W29C010M, W29C011A + * datasheets this is the only valid probe function for those chips. + */ int probe_w29ee011(struct flashchip *flash) { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; - if (!chip_to_probe || strcmp(chip_to_probe, "W29EE011")) { - msg_cdbg("Probing disabled for Winbond W29EE011 because " - "the probing sequence puts the AMIC A49LF040A in " - "a funky state. Use 'flashrom -c W29EE011' if you " - "have a board with this chip.\n"); + if (!chip_to_probe || strcmp(chip_to_probe, flash->name)) { + msg_cdbg("Old Winbond W29* probe method disabled because " + "the probing sequence puts the AMIC A49LF040A in " + "a funky state. Use 'flashrom -c %s' if you " + "have a board with such a chip.\n", flash->name); return 0; }

1 0

Add my mobo to the supported devices list
by Abhinav Hardikar 26 Jul '11

26 Jul '11

Hi! I actually wanted to notify that my Mobo works with flashrom. About Mobo: Company: Jetway/J-Mark Model: J-7BXAN REV: 2.1 Website: http://web.archive.org/web/20000605120828/http://www.j-mark.com/Motherbds/7… "flashrom -V" output : abhinav@ubuntu:~$ sudo flashrom -V -w /media/usb/bios.BIN flashrom v0.9.3-r1323 on Linux 2.6.38-10-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 3 usecs, 175M loops per second, 10 myus = 12 us, 100 myus = 102 us, 1000 myus = 1393 us, 10000 myus = 10531 us, 12 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, OK. This chipset supports the following protocols: Parallel. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMIC A25L05PT, 64 kB: skipped. Probing for AMIC A25L05PU, 64 kB: skipped. Probing for AMIC A25L10PT, 128 kB: skipped. Probing for AMIC A25L10PU, 128 kB: skipped. Probing for AMIC A25L20PT, 256 kB: skipped. Probing for AMIC A25L20PU, 256 kB: skipped. Probing for AMIC A25L40PT, 512 kB: skipped. Probing for AMIC A25L40PU, 512 kB: skipped. Probing for AMIC A25L80P, 1024 kB: skipped. Probing for AMIC A25L16PT, 2048 kB: skipped. Probing for AMIC A25L16PU, 2048 kB: skipped. Probing for AMIC A25L512, 64 kB: skipped. Probing for AMIC A25L010, 128 kB: skipped. Probing for AMIC A25L020, 256 kB: skipped. Probing for AMIC A25L040, 512 kB: skipped. Probing for AMIC A25L080, 1024 kB: skipped. Probing for AMIC A25L016, 2048 kB: skipped. Probing for AMIC A25L032, 4096 kB: skipped. Probing for AMIC A25LQ032, 4096 kB: skipped. Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for AMIC A49LF040A, 512 kB: skipped. Probing for Atmel AT25DF021, 256 kB: skipped. Probing for Atmel AT25DF041A, 512 kB: skipped. Probing for Atmel AT25DF081, 1024 kB: skipped. Probing for Atmel AT25DF081A, 1024 kB: skipped. Probing for Atmel AT25DF161, 2048 kB: skipped. Probing for Atmel AT25DF321, 4096 kB: skipped. Probing for Atmel AT25DF321A, 4096 kB: skipped. Probing for Atmel AT25DF641, 8192 kB: skipped. Probing for Atmel AT25DQ161, 2048 kB: skipped. Probing for Atmel AT25F512B, 64 kB: skipped. Probing for Atmel AT25FS010, 128 kB: skipped. Probing for Atmel AT25FS040, 512 kB: skipped. Probing for Atmel AT26DF041, 512 kB: skipped. Probing for Atmel AT26DF081A, 1024 kB: skipped. Probing for Atmel AT26DF161, 2048 kB: skipped. Probing for Atmel AT26DF161A, 2048 kB: skipped. Probing for Atmel AT26F004, 512 kB: skipped. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT45CS1282, 16896 kB: skipped. Probing for Atmel AT45DB011D, 128 kB: skipped. Probing for Atmel AT45DB021D, 256 kB: skipped. Probing for Atmel AT45DB041D, 512 kB: skipped. Probing for Atmel AT45DB081D, 1024 kB: skipped. Probing for Atmel AT45DB161D, 2048 kB: skipped. Probing for Atmel AT45DB321C, 4224 kB: skipped. Probing for Atmel AT45DB321D, 4096 kB: skipped. Probing for Atmel AT45DB642D, 8192 kB: skipped. Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for EMST F25L008A, 1024 kB: skipped. Probing for Eon EN25B05, 64 kB: skipped. Probing for Eon EN25B05T, 64 kB: skipped. Probing for Eon EN25B10, 128 kB: skipped. Probing for Eon EN25B10T, 128 kB: skipped. Probing for Eon EN25B20, 256 kB: skipped. Probing for Eon EN25B20T, 256 kB: skipped. Probing for Eon EN25B40, 512 kB: skipped. Probing for Eon EN25B40T, 512 kB: skipped. Probing for Eon EN25B80, 1024 kB: skipped. Probing for Eon EN25B80T, 1024 kB: skipped. Probing for Eon EN25B16, 2048 kB: skipped. Probing for Eon EN25B16T, 2048 kB: skipped. Probing for Eon EN25B32, 4096 kB: skipped. Probing for Eon EN25B32T, 4096 kB: skipped. Probing for Eon EN25B64, 8192 kB: skipped. Probing for Eon EN25B64T, 8192 kB: skipped. Probing for Eon EN25D16, 2048 kB: skipped. Probing for Eon EN25F05, 64 kB: skipped. Probing for Eon EN25F10, 128 kB: skipped. Probing for Eon EN25F20, 256 kB: skipped. Probing for Eon EN25F40, 512 kB: skipped. Probing for Eon EN25F80, 1024 kB: skipped. Probing for Eon EN25F16, 2048 kB: skipped. Probing for Eon EN25F32, 4096 kB: skipped. Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x6f, id2 0x2f Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x6f, id2 0x2f Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for Intel 82802AB, 512 kB: skipped. Probing for Intel 82802AC, 1024 kB: skipped. Probing for Macronix MX25L512, 64 kB: skipped. Probing for Macronix MX25L1005, 128 kB: skipped. Probing for Macronix MX25L2005, 256 kB: skipped. Probing for Macronix MX25L4005, 512 kB: skipped. Probing for Macronix MX25L8005, 1024 kB: skipped. Probing for Macronix MX25L1605, 2048 kB: skipped. Probing for Macronix MX25L1635D, 2048 kB: skipped. Probing for Macronix MX25L1635E, 2048 kB: skipped. Probing for Macronix MX25L3205, 4096 kB: skipped. Probing for Macronix MX25L3235D, 4096 kB: skipped. Probing for Macronix MX25L6405, 8192 kB: skipped. Probing for Macronix MX25L12805, 16384 kB: skipped. Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Macronix MX29F002B, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Macronix MX29F002T, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Numonyx M25PE10, 128 kB: skipped. Probing for Numonyx M25PE20, 256 kB: skipped. Probing for Numonyx M25PE40, 512 kB: skipped. Probing for Numonyx M25PE80, 1024 kB: skipped. Probing for Numonyx M25PE16, 2048 kB: skipped. Probing for PMC Pm25LV010, 128 kB: skipped. Probing for PMC Pm25LV016B, 2048 kB: skipped. Probing for PMC Pm25LV020, 256 kB: skipped. Probing for PMC Pm25LV040, 512 kB: skipped. Probing for PMC Pm25LV080B, 1024 kB: skipped. Probing for PMC Pm25LV512, 64 kB: skipped. Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x42 Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x42 Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for PMC Pm49FL002, 256 kB: skipped. Probing for PMC Pm49FL004, 512 kB: skipped. Probing for Sanyo LF25FW203A, 2048 kB: skipped. Probing for Sharp LHF00L04, 1024 kB: skipped. Probing for Spansion S25FL004A, 512 kB: skipped. Probing for Spansion S25FL008A, 1024 kB: skipped. Probing for Spansion S25FL016A, 2048 kB: skipped. Probing for Spansion S25FL032A, 4096 kB: skipped. Probing for Spansion S25FL064A, 8192 kB: skipped. Probing for SST SST25VF010.REMS, 128 kB: skipped. Probing for SST SST25VF016B, 2048 kB: skipped. Probing for SST SST25VF032B, 4096 kB: skipped. Probing for SST SST25VF064C, 8192 kB: skipped. Probing for SST SST25VF040.REMS, 512 kB: skipped. Probing for SST SST25VF040B, 512 kB: skipped. Probing for SST SST25LF040A.RES, 512 kB: skipped. Probing for SST SST25VF040B.REMS, 512 kB: skipped. Probing for SST SST25VF080B, 1024 kB: skipped. Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x6f, id2 0x2f, id1 parity violation Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SST SST49LF002A/B, 256 kB: skipped. Probing for SST SST49LF003A/B, 384 kB: skipped. Probing for SST SST49LF004A/B, 512 kB: skipped. Probing for SST SST49LF004C, 512 kB: skipped. Probing for SST SST49LF008A, 1024 kB: skipped. Probing for SST SST49LF008C, 1024 kB: skipped. Probing for SST SST49LF016C, 2048 kB: skipped. Probing for SST SST49LF020, 256 kB: skipped. Probing for SST SST49LF020A, 256 kB: skipped. Probing for SST SST49LF040, 512 kB: skipped. Probing for SST SST49LF040B, 512 kB: skipped. Probing for SST SST49LF080A, 1024 kB: skipped. Probing for SST SST49LF160C, 2048 kB: skipped. Probing for ST M25P05-A, 64 kB: skipped. Probing for ST M25P05.RES, 64 kB: skipped. Probing for ST M25P10-A, 128 kB: skipped. Probing for ST M25P10.RES, 128 kB: skipped. Probing for ST M25P20, 256 kB: skipped. Probing for ST M25P40, 512 kB: skipped. Probing for ST M25P40-old, 512 kB: skipped. Probing for ST M25P80, 1024 kB: skipped. Probing for ST M25P16, 2048 kB: skipped. Probing for ST M25P32, 4096 kB: skipped. Probing for ST M25P64, 8192 kB: skipped. Probing for ST M25P128, 16384 kB: skipped. Probing for ST M25PX16, 2048 kB: skipped. Probing for ST M25PX32, 4096 kB: skipped. Probing for ST M25PX64, 8192 kB: skipped. Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x6f, id2 0x2f Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x6f, id2 0x2f Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for ST M50FLW040A, 512 kB: skipped. Probing for ST M50FLW040B, 512 kB: skipped. Probing for ST M50FLW080A, 1024 kB: skipped. Probing for ST M50FLW080B, 1024 kB: skipped. Probing for ST M50FW002, 256 kB: skipped. Probing for ST M50FW016, 2048 kB: skipped. Probing for ST M50FW040, 512 kB: skipped. Probing for ST M50FW080, 1024 kB: skipped. Probing for ST M50LPW116, 2048 kB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x6f, id2 0x2f, id1 parity violation Probing for Winbond W25Q80, 1024 kB: skipped. Probing for Winbond W25Q16, 2048 kB: skipped. Probing for Winbond W25Q32, 4096 kB: skipped. Probing for Winbond W25Q64, 8192 kB: skipped. Probing for Winbond W25Q128, 16384 kB: skipped. Probing for Winbond W25x10, 128 kB: skipped. Probing for Winbond W25x20, 256 kB: skipped. Probing for Winbond W25x40, 512 kB: skipped. Probing for Winbond W25x80, 1024 kB: skipped. Probing for Winbond W25x16, 2048 kB: skipped. Probing for Winbond W25x32, 4096 kB: skipped. Probing for Winbond W25x64, 8192 kB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xda, id2 0xc1 Found chip "Winbond W29C010(M)/W29C011A/W29EE011/W29EE012" (128 kB, Parallel) at physical address 0xfffe0000. Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Winbond W39V040A, 512 kB: skipped. Probing for Winbond W39V040B, 512 kB: skipped. Probing for Winbond W39V040C, 512 kB: skipped. Probing for Winbond W39V040FA, 512 kB: skipped. Probing for Winbond W39V040FB, 512 kB: skipped. Probing for Winbond W39V040FC, 512 kB: skipped. Probing for Winbond W39V080A, 1024 kB: skipped. Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0xc1 Probing for Winbond W49V002A, 256 kB: skipped. Probing for Winbond W49V002FA, 256 kB: skipped. Probing for Winbond W39V080FA, 1024 kB: skipped. Probing for Winbond W39V080FA (dual mode), 512 kB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 kB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 kB: skipped. Probing for Eon unknown Eon SPI chip, 0 kB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 kB: skipped. Probing for PMC unknown PMC SPI chip, 0 kB: skipped. Probing for SST unknown SST SPI chip, 0 kB: skipped. Probing for ST unknown ST SPI chip, 0 kB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: skipped. Probing for Generic unknown SPI chip (RDID), 0 kB: skipped. Probing for Generic unknown SPI chip (REMS), 0 kB: skipped. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x01ffff:EW Done. Verifying flash... VERIFIED. Restoring PCI config space for 00:07:0 reg 0x4e ------------------------------------------------------------------------------------------------------------------- superiotool -deV output: superiotool r5050 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Found Winbond W83977EF/EG (id=0x52, rev=0xf4) at 0x370 Register dump: idx 02 20 21 22 23 24 25 26 28 2a 2b 2c 2d 2e 2f val ff 52 f4 ff fe c4 00 40 00 00 00 00 00 00 ff def RR 52 MM ff fe MM 00 MM 00 00 00 00 RR RR RR LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0c 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 03 00 def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 40 def 01 00 60 00 64 01 0c 83 LDN 0x07 (GPIO 1) idx 30 60 61 62 63 64 65 70 72 e0 e1 e2 e3 e4 e5 e6 e7 f1 val 00 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00 def 00 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00 LDN 0x08 (GPIO 2) idx 30 60 61 70 72 e8 e9 ea eb ec ed f0 f1 f2 f3 f4 val 01 00 00 00 00 10 01 01 01 01 08 00 ff 00 00 00 def 00 00 00 00 00 01 01 01 01 01 01 00 RR 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 00 00 20 04 00 00 00 00 00 8f 37 00 00 00 00 00 00 def 00 00 00 00 MM MM MM 00 00 00 00 00 00 00 00 00 00 RR RR Hardware monitor (0x0004) Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. ------------------------------------------------------------------------------------------------------------ lspci -xxxnnnvvv output: abhinav@ubuntu:~$ lspci -xxxnnnvvv 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at e3000000 (32-bit, prefetchable) [size=4M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00: 86 80 90 71 06 00 10 22 03 00 00 06 00 20 00 00 10: 08 00 00 e3 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 91 71 07 01 20 02 03 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 a0 22 20: 00 e0 f0 e1 00 d8 f0 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f000 [size=16] Kernel driver in use: ata_piix 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone] [10b7:9055] (rev 24) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e400 [size=128] Region 1: Memory at e3400000 (32-bit, non-prefetchable) [size=128] Expansion ROM at e2000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x 00: b7 10 55 90 07 00 10 82 24 00 00 02 08 20 00 00 10: 01 e4 00 00 00 00 40 e3 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90 30: 00 00 00 e2 dc 00 00 00 00 00 00 00 05 01 0a 0a 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV18GL [Quadro NVS 280 SD] [10de:018a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Device [10de:0190] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] [virtual] Expansion ROM at e1000000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: nouveau, nvidiafb 00: de 10 8a 01 07 00 b0 02 a2 00 00 03 00 20 00 00 10: 00 00 00 e0 08 00 00 d8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 90 01 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01 Thanx Abhinav (aHardyX)

2 1

[PATCH] fix counting of supported chips in the wiki output
by Stefan Tauner 26 Jul '11

26 Jul '11

where should i put this one? 1. commit it on its own 2. tested stuff patch, or 3. patch touching print_wiki.c in the voltage printing branch Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- print_wiki.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/print_wiki.c b/print_wiki.c index 6280aff..b70da86 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -205,8 +205,12 @@ static void print_supported_chips_wiki(int cols) uint32_t t; char *s; - for (f = flashchips; f->name != NULL; f++) + for (f = flashchips; f->name != NULL; f++) { + /* Don't count "unknown XXXX SPI chip" entries. */ + if (!strncmp(f->name, "unknown", 7)) + continue; chipcount++; + } printf("\n== Supported chips ==\n\nTotal amount of supported " "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n" -- 1.7.1

1 0

Re: [flashrom] [PATCH] be more refined regarding DMI chassis types
by Carl-Daniel Hailfinger 26 Jul '11

26 Jul '11

Am 26.07.2011 01:22 schrieb Stefan Tauner: > we had broken laptops in the past that were not detected as such because > their DMI chassis-type was either undefined/out-of-spec, or set to > 'other' or 'unknown'. > > this patch tries to mitigate this problem as follows: > - if the DMI chassis-type clearly identifies the system as > laptop/notebook/mobile platform then nothing changes: the user gets > the laptop warning without a hint to the force switch. > - if the DMI chassis-type is not specific enough, we warn the user > similarly, but tell them the switch. > > to reduce the number of false positives i have added a few new > chassis types that we have encountered in the last months to the list. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1390 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: stefanct Date: Tue Jul 26 02:54:42 2011 New Revision: 1390 URL: http://flashrom.org/trac/flashrom/changeset/1390 Log: be more refined regarding DMI chassis types we had broken laptops in the past that were not detected as such because their DMI chassis-type was either undefined/out-of-spec, or set to 'other' or 'unknown'. this patch tries to mitigate this problem as follows: - if the DMI chassis-type clearly identifies the system as laptop/notebook/mobile platform then nothing changes: the user gets the laptop warning without a hint to the force switch. - if the DMI chassis-type is not specific enough, we warn the user similarly, but tell them the switch. to reduce the number of false positives i have added a few new chassis types that we have encountered in the last months to the list. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dmi.c trunk/internal.c Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Tue Jul 26 00:44:09 2011 (r1389) +++ trunk/dmi.c Tue Jul 26 02:54:42 2011 (r1390) @@ -54,7 +54,12 @@ "baseboard-version", }; -/* A full list of chassis types can be found in the System Management BIOS +/* This list is used to identify supposed laptops. The is_laptop field has the + * following meaning: + * - 0: in all likelihood not a laptop + * - 1: in all likelihood a laptop + * - 2: chassis-type is not specific enough + * A full list of chassis types can be found in the System Management BIOS * (SMBIOS) Reference Specification 2.7.0 section 7.4.1 "Chassis Types" at * http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.7.0.p… * The types below are the most common ones. @@ -64,14 +69,18 @@ unsigned char is_laptop; const char *name; } dmi_chassis_types[] = { - {0x01, 0, "Other"}, - {0x02, 0, "Unknown"}, + {0x01, 2, "Other"}, + {0x02, 2, "Unknown"}, {0x03, 0, "Desktop",}, + {0x06, 0, "Mini Tower"}, + {0x07, 0, "Tower"}, {0x08, 1, "Portable"}, {0x09, 1, "Laptop"}, {0x0a, 1, "Notebook"}, {0x0b, 1, "Hand Held"}, {0x0e, 1, "Sub Notebook"}, + {0x11, 0, "Main Server Chassis"}, + {0x17, 0, "Rack Mount Chassis"}, }; #define DMI_COMMAND_LEN_MAX 260 @@ -152,16 +161,25 @@ } chassis_type = get_dmi_string("chassis-type"); - if (chassis_type) { - for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { - if (!strcasecmp(chassis_type, - dmi_chassis_types[i].name) && - dmi_chassis_types[i].is_laptop) { - msg_pdbg("Laptop detected via DMI\n"); - is_laptop = 1; - } + if (chassis_type == NULL) + return; + + is_laptop = 2; + for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { + if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) { + is_laptop = dmi_chassis_types[i].is_laptop; + break; } } + + switch (is_laptop) { + case 1: + msg_pdbg("Laptop detected via DMI.\n"); + break; + case 2: + msg_pdbg("DMI chassis-type is not specific enough.\n"); + break; + } free(chassis_type); } Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Tue Jul 26 00:44:09 2011 (r1389) +++ trunk/internal.c Tue Jul 26 02:54:42 2011 (r1390) @@ -230,11 +230,19 @@ /* Warn if a non-whitelisted laptop is detected. */ if (is_laptop && !laptop_ok) { - msg_perr("========================================================================\n" - "WARNING! You seem to be running flashrom on an unsupported laptop.\n" - "Laptops, notebooks and netbooks are difficult to support and we recommend\n" - "to use the vendor flashing utility. The embedded controller (EC) in these\n" - "machines often interacts badly with flashing.\n" + msg_perr("========================================================================\n"); + if (is_laptop == 1) { + msg_perr("WARNING! You seem to be running flashrom on an unsupported laptop.\n"); + } else { + msg_perr("WARNING! You may be running flashrom on an unsupported laptop. We could\n" + "not detect this for sure because your vendor has not setup the SMBIOS\n" + "tables correctly. You can enforce execution by adding\n" + "'-p internal:laptop=force_I_want_a_brick' to the command line, but\n" + "please read the following warning if you are not sure.\n\n"); + } + msg_perr("Laptops, notebooks and netbooks are difficult to support and we\n" + "recommend to use the vendor flashing utility. The embedded controller\n" + "(EC) in these machines often interacts badly with flashing.\n" "See http://www.flashrom.org/Laptops for details.\n\n" "If flash is shared with the EC, erase is guaranteed to brick your laptop\n" "and write may brick your laptop.\n" @@ -242,6 +250,7 @@ "failure and sudden poweroff.\n" "You have been warned.\n" "========================================================================\n"); + if (force_laptop) { msg_perr("Proceeding anyway because user specified " "laptop=force_I_want_a_brick\n");

1 0

flashrom virtual machine policy?
by Bernd Blaauw 26 Jul '11

26 Jul '11

What's the Flashrom project's stance on virtualisation/emulation combined with using Flashrom? I've only got some experience with VMware Workstation and not much else with others, but how should a FlashROM that's being run in an emulator react? * Programming a BIOS in a VM seems rather impossible as you can't reach hardware, and BIOS is made up of a file on host system that you haven't got access to. * Erasing same issue. * Reading might be considered possible, but doesn't play nicely along with detecting chipsets etc. Anyway for VMware Workstation 7.1 (x64 on Windows 7 Ultimate x64), and flashrom revision 1322 (latest of Idwer's (auto?-)compiled DOS/DJGGP (or openwatcom, I don't know..) binaries: Short version (the empty line is a missing DMIDECOD.EXE): flashrom v0.9.3-r1322 on FreeDOS 7 (i686), built with libpci 3.1.5, GCC 4.3.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel PIIX4/4E/4M", enabling flash write... tried to set 0x4e to 0x2d4 on PIIX4/4E/4M failed (WARNING ONLY) FAILED! This chipset supports the following protocols: Parallel. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Long/verbose version: flashrom v0.9.3-r1322 on FreeDOS 7 (i686), built with libpci 3.1.5, GCC 4.3.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 60000 usecs, 2384M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 240000 myus = 280000 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, tried to set 0x4e to 0x2d4 on PIIX4/4E/4M failed (WARNING ONLY) FAILED! This chipset supports the following protocols: Parallel. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 kB: skipped. Probing for AMIC A25L05PU, 64 kB: skipped. Probing for AMIC A25L10PT, 128 kB: skipped. Probing for AMIC A25L10PU, 128 kB: skipped. Probing for AMIC A25L20PT, 256 kB: skipped. Probing for AMIC A25L20PU, 256 kB: skipped. Probing for AMIC A25L40PT, 512 kB: skipped. Probing for AMIC A25L40PU, 512 kB: skipped. Probing for AMIC A25L80P, 1024 kB: skipped. Probing for AMIC A25L16PT, 2048 kB: skipped. Probing for AMIC A25L16PU, 2048 kB: skipped. Probing for AMIC A25L512, 64 kB: skipped. Probing for AMIC A25L010, 128 kB: skipped. Probing for AMIC A25L020, 256 kB: skipped. Probing for AMIC A25L040, 512 kB: skipped. Probing for AMIC A25L080, 1024 kB: skipped. Probing for AMIC A25L016, 2048 kB: skipped. Probing for AMIC A25L032, 4096 kB: skipped. Probing for AMIC A25LQ032, 4096 kB: skipped. Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: skipped. Probing for Atmel AT25DF021, 256 kB: skipped. Probing for Atmel AT25DF041A, 512 kB: skipped. Probing for Atmel AT25DF081, 1024 kB: skipped. Probing for Atmel AT25DF081A, 1024 kB: skipped. Probing for Atmel AT25DF161, 2048 kB: skipped. Probing for Atmel AT25DF321, 4096 kB: skipped. Probing for Atmel AT25DF321A, 4096 kB: skipped. Probing for Atmel AT25DF641, 8192 kB: skipped. Probing for Atmel AT25DQ161, 2048 kB: skipped. Probing for Atmel AT25F512B, 64 kB: skipped. Probing for Atmel AT25FS010, 128 kB: skipped. Probing for Atmel AT25FS040, 512 kB: skipped. Probing for Atmel AT26DF041, 512 kB: skipped. Probing for Atmel AT26DF081A, 1024 kB: skipped. Probing for Atmel AT26DF161, 2048 kB: skipped. Probing for Atmel AT26DF161A, 2048 kB: skipped. Probing for Atmel AT26F004, 512 kB: skipped. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT45CS1282, 16896 kB: skipped. Probing for Atmel AT45DB011D, 128 kB: skipped. Probing for Atmel AT45DB021D, 256 kB: skipped. Probing for Atmel AT45DB041D, 512 kB: skipped. Probing for Atmel AT45DB081D, 1024 kB: skipped. Probing for Atmel AT45DB161D, 2048 kB: skipped. Probing for Atmel AT45DB321C, 4224 kB: skipped. Probing for Atmel AT45DB321D, 4096 kB: skipped. Probing for Atmel AT45DB642D, 8192 kB: skipped. Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F25L008A, 1024 kB: skipped. Probing for Eon EN25B05, 64 kB: skipped. Probing for Eon EN25B05T, 64 kB: skipped. Probing for Eon EN25B10, 128 kB: skipped. Probing for Eon EN25B10T, 128 kB: skipped. Probing for Eon EN25B20, 256 kB: skipped. Probing for Eon EN25B20T, 256 kB: skipped. Probing for Eon EN25B40, 512 kB: skipped. Probing for Eon EN25B40T, 512 kB: skipped. Probing for Eon EN25B80, 1024 kB: skipped. Probing for Eon EN25B80T, 1024 kB: skipped. Probing for Eon EN25B16, 2048 kB: skipped. Probing for Eon EN25B16T, 2048 kB: skipped. Probing for Eon EN25B32, 4096 kB: skipped. Probing for Eon EN25B32T, 4096 kB: skipped. Probing for Eon EN25B64, 8192 kB: skipped. Probing for Eon EN25B64T, 8192 kB: skipped. Probing for Eon EN25D16, 2048 kB: skipped. Probing for Eon EN25F05, 64 kB: skipped. Probing for Eon EN25F10, 128 kB: skipped. Probing for Eon EN25F20, 256 kB: skipped. Probing for Eon EN25F40, 512 kB: skipped. Probing for Eon EN25F80, 1024 kB: skipped. Probing for Eon EN25F16, 2048 kB: skipped. Probing for Eon EN25F32, 4096 kB: skipped. Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: skipped. Probing for Intel 82802AC, 1024 kB: skipped. Probing for Macronix MX25L512, 64 kB: skipped. Probing for Macronix MX25L1005, 128 kB: skipped. Probing for Macronix MX25L2005, 256 kB: skipped. Probing for Macronix MX25L4005, 512 kB: skipped. Probing for Macronix MX25L8005, 1024 kB: skipped. Probing for Macronix MX25L1605, 2048 kB: skipped. Probing for Macronix MX25L1635D, 2048 kB: skipped. Probing for Macronix MX25L1635E, 2048 kB: skipped. Probing for Macronix MX25L3205, 4096 kB: skipped. Probing for Macronix MX25L3235D, 4096 kB: skipped. Probing for Macronix MX25L6405, 8192 kB: skipped. Probing for Macronix MX25L12805, 16384 kB: skipped. Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 kB: skipped. Probing for Numonyx M25PE20, 256 kB: skipped. Probing for Numonyx M25PE40, 512 kB: skipped. Probing for Numonyx M25PE80, 1024 kB: skipped. Probing for Numonyx M25PE16, 2048 kB: skipped. Probing for PMC Pm25LV010, 128 kB: skipped. Probing for PMC Pm25LV016B, 2048 kB: skipped. Probing for PMC Pm25LV020, 256 kB: skipped. Probing for PMC Pm25LV040, 512 kB: skipped. Probing for PMC Pm25LV080B, 1024 kB: skipped. Probing for PMC Pm25LV512, 64 kB: skipped. Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: skipped. Probing for PMC Pm49FL004, 512 kB: skipped. Probing for Sanyo LF25FW203A, 2048 kB: skipped. Probing for Sharp LHF00L04, 1024 kB: skipped. Probing for Spansion S25FL004A, 512 kB: skipped. Probing for Spansion S25FL008A, 1024 kB: skipped. Probing for Spansion S25FL016A, 2048 kB: skipped. Probing for Spansion S25FL032A, 4096 kB: skipped. Probing for Spansion S25FL064A, 8192 kB: skipped. Probing for SST SST25VF010.REMS, 128 kB: skipped. Probing for SST SST25VF016B, 2048 kB: skipped. Probing for SST SST25VF032B, 4096 kB: skipped. Probing for SST SST25VF064C, 8192 kB: skipped. Probing for SST SST25VF040.REMS, 512 kB: skipped. Probing for SST SST25VF040B, 512 kB: skipped. Probing for SST SST25LF040A.RES, 512 kB: skipped. Probing for SST SST25VF040B.REMS, 512 kB: skipped. Probing for SST SST25VF080B, 1024 kB: skipped. Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: skipped. Probing for SST SST49LF003A/B, 384 kB: skipped. Probing for SST SST49LF004A/B, 512 kB: skipped. Probing for SST SST49LF004C, 512 kB: skipped. Probing for SST SST49LF008A, 1024 kB: skipped. Probing for SST SST49LF008C, 1024 kB: skipped. Probing for SST SST49LF016C, 2048 kB: skipped. Probing for SST SST49LF020, 256 kB: skipped. Probing for SST SST49LF020A, 256 kB: skipped. Probing for SST SST49LF040, 512 kB: skipped. Probing for SST SST49LF040B, 512 kB: skipped. Probing for SST SST49LF080A, 1024 kB: skipped. Probing for SST SST49LF160C, 2048 kB: skipped. Probing for ST M25P05-A, 64 kB: skipped. Probing for ST M25P05.RES, 64 kB: skipped. Probing for ST M25P10-A, 128 kB: skipped. Probing for ST M25P10.RES, 128 kB: skipped. Probing for ST M25P20, 256 kB: skipped. Probing for ST M25P40, 512 kB: skipped. Probing for ST M25P40-old, 512 kB: skipped. Probing for ST M25P80, 1024 kB: skipped. Probing for ST M25P16, 2048 kB: skipped. Probing for ST M25P32, 4096 kB: skipped. Probing for ST M25P64, 8192 kB: skipped. Probing for ST M25P128, 16384 kB: skipped. Probing for ST M25PX16, 2048 kB: skipped. Probing for ST M25PX32, 4096 kB: skipped. Probing for ST M25PX64, 8192 kB: skipped. Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xca, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: skipped. Probing for ST M50FLW040B, 512 kB: skipped. Probing for ST M50FLW080A, 1024 kB: skipped. Probing for ST M50FLW080B, 1024 kB: skipped. Probing for ST M50FW002, 256 kB: skipped. Probing for ST M50FW016, 2048 kB: skipped. Probing for ST M50FW040, 512 kB: skipped. Probing for ST M50FW080, 1024 kB: skipped. Probing for ST M50LPW116, 2048 kB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: skipped. Probing for Winbond W25Q16, 2048 kB: skipped. Probing for Winbond W25Q32, 4096 kB: skipped. Probing for Winbond W25Q64, 8192 kB: skipped. Probing for Winbond W25Q128, 16384 kB: skipped. Probing for Winbond W25x10, 128 kB: skipped. Probing for Winbond W25x20, 256 kB: skipped. Probing for Winbond W25x40, 512 kB: skipped. Probing for Winbond W25x80, 1024 kB: skipped. Probing for Winbond W25x16, 2048 kB: skipped. Probing for Winbond W25x32, 4096 kB: skipped. Probing for Winbond W25x64, 8192 kB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x3b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: skipped. Probing for Winbond W39V040B, 512 kB: skipped. Probing for Winbond W39V040C, 512 kB: skipped. Probing for Winbond W39V040FA, 512 kB: skipped. Probing for Winbond W39V040FB, 512 kB: skipped. Probing for Winbond W39V040FC, 512 kB: skipped. Probing for Winbond W39V080A, 1024 kB: skipped. Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: skipped. Probing for Winbond W49V002FA, 256 kB: skipped. Probing for Winbond W39V080FA, 1024 kB: skipped. Probing for Winbond W39V080FA (dual mode), 512 kB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 kB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 kB: skipped. Probing for Eon unknown Eon SPI chip, 0 kB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 kB: skipped. Probing for PMC unknown PMC SPI chip, 0 kB: skipped. Probing for SST unknown SST SPI chip, 0 kB: skipped. Probing for ST unknown ST SPI chip, 0 kB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: skipped. Probing for Generic unknown SPI chip (RDID), 0 kB: skipped. Probing for Generic unknown SPI chip (REMS), 0 kB: skipped. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:07:0 reg 0x4e

3 3

Re: [flashrom] [PATCH] be more refined regarding DMI chassis types
by Bernd Blaauw 26 Jul '11

26 Jul '11

Op 26-7-2011 1:22, Stefan Tauner schreef: > we had broken laptops in the past that were not detected as such because > their DMI chassis-type was either undefined/out-of-spec, or set to > 'other' or 'unknown'. Does Flashrom use a list of "known mobile hardware" (either chipset, processor or videocard) to recognise a machine as laptop? Intel seems to have a lot of 'M' stuff (ICH9M for example).

2 2

Re: [flashrom] [PATCH] be more refined regarding DMI chassis types
by Stefan Tauner 26 Jul '11

26 Jul '11

On Tue, 26 Jul 2011 01:22:01 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > + msg_pdbg("DMI chassis-type is not specific enough.\n"); that line is already gone locally (thanks idwer). > + switch (is_laptop) { > + case 1: > + msg_pdbg("Laptop detected via DMI.\n"); > + break; > + case 2: > + msg_pdbg("DMI chassis-type is not specific enough.\n"); > + break; > + } -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] be more refined regarding DMI chassis types
by Carl-Daniel Hailfinger 26 Jul '11

26 Jul '11

Am 04.06.2011 10:55 schrieb Stefan Tauner: > we had broken laptops in the past that were not detected as such because their DMI chassis-type was either undefined/out-of-spec, or set to 'other' or 'unknown'. > > this patch tries to mitigate this problem as follows: > - if the DMI chassis-type clearly identifies the system as laptop/notebook/mobile platform then nothing changes: the user gets the laptop warning without a hint to the force switch. > - if the DMI chassis-type is not specific enough, we warn the user similarly, but tell them the switch. > to reduce the number of false positives i have added a few new chassis types that we have encountered in the last months to the list. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > dmi.c | 37 ++++++++++++++++++++++++++----------- > internal.c | 21 +++++++++++++++------ > 2 files changed, 41 insertions(+), 17 deletions(-) > > diff --git a/dmi.c b/dmi.c > index cda6656..5d37b76 100644 > --- a/dmi.c > +++ b/dmi.c > @@ -54,7 +54,13 @@ static const char *dmidecode_names[] = { > "baseboard-version", > }; > > -/* A full list of chassis types can be found in the System Management BIOS > +/* This list is used to identify supposed laptops. The is_laptop field has the > + * following meaning: > + * - 0: in all likelihood not a laptop > + * - 1: in all likelihood a laptop > + * - 2: chassis-type is not specific enough (these do not need to be listed > + * in the table, because it is the default anyway) > + * A full list of chassis types can be found in the System Management BIOS > * (SMBIOS) Reference Specification 2.7.0 section 7.4.1 "Chassis Types" at > * http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.7.0.p… > * The types below are the most common ones. > @@ -64,14 +70,16 @@ static const struct { > unsigned char is_laptop; > const char *name; > } dmi_chassis_types[] = { > - {0x01, 0, "Other"}, > - {0x02, 0, "Unknown"}, > Why remove those lines? Use 2 for undecided cases. Removing these lines will make it harder later to integrate the DMI decoder (we currently rely on external dmidecode and that fails quite often due to dmidecode not being installed etc.). The DMI decoder integration patch was posted some time ago to the list, but it needs to be redone/cleaned up significantly before we can merge it. > {0x03, 0, "Desktop",}, > + {0x06, 0, "Mini Tower"}, > + {0x07, 0, "Tower"}, > {0x08, 1, "Portable"}, > {0x09, 1, "Laptop"}, > {0x0a, 1, "Notebook"}, > {0x0b, 1, "Hand Held"}, > {0x0e, 1, "Sub Notebook"}, > + {0x11, 0, "Main Server Chassis"}, > + {0x17, 0, "Rack Mount Chassis"}, > }; > > #define DMI_COMMAND_LEN_MAX 260 > @@ -152,16 +160,23 @@ void dmi_init(void) > } > > chassis_type = get_dmi_string("chassis-type"); > - if (chassis_type) { > - for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { > - if (!strcasecmp(chassis_type, > - dmi_chassis_types[i].name) && > - dmi_chassis_types[i].is_laptop) { > - msg_pdbg("Laptop detected via DMI\n"); > - is_laptop = 1; > - } > + if (chassis_type == NULL) > + return; > + > is_laptop = 2; > + for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { > + if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) { > + is_laptop = dmi_chassis_types[i].is_laptop; > break; > + if (is_laptop == 1) { > + msg_pdbg("Laptop detected via DMI.\n"); > + free(chassis_type); > + return; > + } else > + break; /* first match breaks loop */ > Can you kill the whole inner if statement? > } > } > + > + msg_pdbg("DMI chassis-type is not specific enough.\n"); > Please use this instead (my whitespace is broken, I know): switch (is_laptop) { case 1: msg_pdbg("Laptop detected via DMI.\n"); break; case 2: msg_pdbg("DMI chassis-type is not specific enough.\n"); break; } > + is_laptop = 2; > Kill the assignment above. > free(chassis_type); > } > > diff --git a/internal.c b/internal.c > index c9f62c1..bbcdc5b 100644 > --- a/internal.c > +++ b/internal.c > @@ -124,7 +124,7 @@ int register_superio(struct superio s) > > #endif > > -int is_laptop = 0; > +int is_laptop = -1; > This changes the logic. With this change, flashrom assumes that every machine is a laptop, and that will bite us everywhere dmidecode is unavailable. Please review your changes below in light of that. > int laptop_ok = 0; > > int internal_init(void) > @@ -222,11 +222,19 @@ int internal_init(void) > > /* Warn if a non-whitelisted laptop is detected. */ > if (is_laptop && !laptop_ok) { > - msg_perr("========================================================================\n" > - "WARNING! You seem to be running flashrom on an unsupported laptop.\n" > - "Laptops, notebooks and netbooks are difficult to support and we recommend\n" > - "to use the vendor flashing utility. The embedded controller (EC) in these\n" > - "machines often interacts badly with flashing.\n" > + msg_perr("========================================================================\n"); > + if (is_laptop == 1) { > + msg_perr("WARNING! You seem to be running flashrom on an unsupported laptop.\n"); > + } else { > + msg_perr("WARNING! You may be running flashrom on an unsupported laptop. We could\n" > + "not detect this for sure because your vendor has not setup the SMBIOS\n" > + "tables correctly. You can enforce execution by adding\n" > + "'-p internal:laptop=force_I_want_a_brick' to the command line, but\n" > + "please read the following warning if you are not sure.\n\n"); > + } > + msg_perr("Laptops, notebooks and netbooks are difficult to support and we\n" > + "recommend to use the vendor flashing utility. The embedded controller\n" > + "(EC) in these machines often interacts badly with flashing.\n" > "See http://www.flashrom.org/Laptops for details.\n\n" > "If flash is shared with the EC, erase is guaranteed to brick your laptop\n" > "and write may brick your laptop.\n" > @@ -234,6 +242,7 @@ int internal_init(void) > "failure and sudden poweroff.\n" > "You have been warned.\n" > "========================================================================\n"); > + > if (force_laptop) { > msg_perr("Proceeding anyway because user specified " > "laptop=force_I_want_a_brick\n"); > Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

[PATCH] Fix ICH FWH IDSEL setting
by Carl-Daniel Hailfinger 26 Jul '11

26 Jul '11

Fix ICH FWH IDSEL setting with the fwh_idsel= internal programmer parameter. The code took 32 bits of input and wrote them to an 48 bit register, duplicating some values. Document the fwh_idsel= parameter in the man page. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ich_fwh_idsel_programmer_param_docfix/flashrom.8 =================================================================== --- flashrom-ich_fwh_idsel_programmer_param_docfix/flashrom.8 (Revision 1380) +++ flashrom-ich_fwh_idsel_programmer_param_docfix/flashrom.8 (Arbeitskopie) @@ -298,6 +298,20 @@ .B it87spi programmer. .sp +If you have an Intel chipset with an ICH6 or later southbridge and if you want +to set specific IDSEL values for a non-default flash chip or an embedded +controller (EC), you can use the +.sp +.B " flashrom \-p internal:fwh_idsel=value" +.sp +syntax where value is the 48-bit hexadecimal raw value to be written in the +IDSEL registers of the Intel southbridge. The upper 32 bits use one hex digit +each per 512 kB range between 0xffc00000 and 0xffffffff, and the lower 16 bits +use one hex digit each per 1024 kB range between 0xff400000 and 0xff7fffff. +The rightmost hex digit corresponds with the lowest address range. All address +ranges have a corresponding sister range 4 MB below with identical IDSEL +settings. +.sp Using flashrom on laptops is dangerous and may easily make your hardware unusable (see also the .B BUGS Index: flashrom-ich_fwh_idsel_programmer_param_docfix/chipset_enable.c =================================================================== --- flashrom-ich_fwh_idsel_programmer_param_docfix/chipset_enable.c (Revision 1380) +++ flashrom-ich_fwh_idsel_programmer_param_docfix/chipset_enable.c (Arbeitskopie) @@ -301,7 +301,7 @@ static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) { - uint32_t fwh_conf; + uint64_t fwh_conf; int i; char *idsel = NULL; int tmp; @@ -311,15 +311,18 @@ idsel = extract_programmer_param("fwh_idsel"); if (idsel && strlen(idsel)) { - fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); - - /* FIXME: Need to undo this on shutdown. */ - msg_pinfo("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf); - rpci_write_long(dev, 0xd0, fwh_conf); - rpci_write_word(dev, 0xd4, fwh_conf); + fwh_conf = pci_read_long(dev, 0xd0); + fwh_conf <<= 16; + fwh_conf |= pci_read_word(dev, 0xd4); + msg_pinfo("\nSetting IDSEL from 0x%012llx ", fwh_conf); + /* Base 16, nothing else makes sense. */ + fwh_conf = (uint64_t)strtoull(idsel, NULL, 16); + msg_pinfo("to 0x%012llx for top 16 MB", fwh_conf); + rpci_write_long(dev, 0xd0, (fwh_conf >> 16) & 0xffffffff); + rpci_write_word(dev, 0xd4, fwh_conf & 0xffff); /* FIXME: Decode settings are not changed. */ } else if (idsel) { - msg_perr("Error: idsel= specified, but no number given.\n"); + msg_perr("Error: fwh_idsel= specified, but no number given.\n"); free(idsel); /* FIXME: Return failure here once internal_init() starts * to care about the return value of the chipset enable. -- http://www.hailfinger.org/

2 5

[commit] r1389 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: hailfinger Date: Tue Jul 26 00:44:09 2011 New Revision: 1389 URL: http://flashrom.org/trac/flashrom/changeset/1389 Log: Fix ICH FWH IDSEL setting with the fwh_idsel= internal programmer parameter. The code took 32 bits of input and wrote them to an 48 bit register, duplicating some values. Document the fwh_idsel= parameter in the man page. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipset_enable.c trunk/flashrom.8 Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Tue Jul 26 00:07:05 2011 (r1388) +++ trunk/chipset_enable.c Tue Jul 26 00:44:09 2011 (r1389) @@ -30,6 +30,8 @@ #include <stdlib.h> #include <string.h> #include <unistd.h> +#include <inttypes.h> +#include <errno.h> #include "flash.h" #include "programmer.h" @@ -311,15 +313,33 @@ idsel = extract_programmer_param("fwh_idsel"); if (idsel && strlen(idsel)) { - fwh_conf = (uint32_t)strtoul(idsel, NULL, 0); - - /* FIXME: Need to undo this on shutdown. */ - msg_pinfo("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf); - rpci_write_long(dev, 0xd0, fwh_conf); - rpci_write_word(dev, 0xd4, fwh_conf); + uint64_t fwh_idsel_old; + uint64_t fwh_idsel; + errno = 0; + /* Base 16, nothing else makes sense. */ + fwh_idsel = (uint64_t)strtoull(idsel, NULL, 16); + if (errno) { + msg_perr("Error: fwh_idsel= specified, but value could " + "not be converted.\n"); + goto idsel_garbage_out; + } + if (fwh_idsel & 0xffff000000000000ULL) { + msg_perr("Error: fwh_idsel= specified, but value had " + "unusued bits set.\n"); + goto idsel_garbage_out; + } + fwh_idsel_old = pci_read_long(dev, 0xd0); + fwh_idsel_old <<= 16; + fwh_idsel_old |= pci_read_word(dev, 0xd4); + msg_pdbg("\nSetting IDSEL from 0x%012" PRIx64 " to " + "0x%012" PRIx64 " for top 16 MB.", fwh_idsel_old, + fwh_idsel); + rpci_write_long(dev, 0xd0, (fwh_idsel >> 16) & 0xffffffff); + rpci_write_word(dev, 0xd4, fwh_idsel & 0xffff); /* FIXME: Decode settings are not changed. */ } else if (idsel) { - msg_perr("Error: idsel= specified, but no number given.\n"); + msg_perr("Error: fwh_idsel= specified, but no value given.\n"); +idsel_garbage_out: free(idsel); /* FIXME: Return failure here once internal_init() starts * to care about the return value of the chipset enable. Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Tue Jul 26 00:07:05 2011 (r1388) +++ trunk/flashrom.8 Tue Jul 26 00:44:09 2011 (r1389) @@ -299,6 +299,23 @@ flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug report so we can diagnose the problem. .sp +If you have an Intel chipset with an ICH6 or later southbridge and if you want +to set specific IDSEL values for a non-default flash chip or an embedded +controller (EC), you can use the +.sp +.B " flashrom \-p internal:fwh_idsel=value" +.sp +syntax where value is the 48-bit hexadecimal raw value to be written in the +IDSEL registers of the Intel southbridge. The upper 32 bits use one hex digit +each per 512 kB range between 0xffc00000 and 0xffffffff, and the lower 16 bits +use one hex digit each per 1024 kB range between 0xff400000 and 0xff7fffff. +The rightmost hex digit corresponds with the lowest address range. All address +ranges have a corresponding sister range 4 MB below with identical IDSEL +settings. The default value for ICH7 is given in the example below. +.sp +Example: +.B "flashrom \-p internal:fwh_idsel=0x001122334567" +.sp Using flashrom on laptops is dangerous and may easily make your hardware unusable (see also the .B BUGS

1 0

[PATCH] satamv.c requires PCI port I/O
by Andrew Morgan 26 Jul '11

26 Jul '11

satamv.c requires PCI port I/O which isn't currently available on anything other than x86/x86_64. Generate the same compiler error as other programmers eg. rayer_spi.c, which is where I copied the code from. Signed-off-by: Andrew Morgan <ziltro(a)ziltro.com> -- Andrew.

3 2

[commit] r1388 - trunk
by repository service 26 Jul '11

26 Jul '11

Author: hailfinger Date: Tue Jul 26 00:07:05 2011 New Revision: 1388 URL: http://flashrom.org/trac/flashrom/changeset/1388 Log: satamv and atahpt require PCI port I/O which isn't currently supported on any architecture except x86/x86_64. Generate the same compiler error as other programmer drivers. Signed-off-by: Andrew Morgan <ziltro(a)ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/atahpt.c trunk/satamv.c Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Mon Jul 25 23:12:57 2011 (r1387) +++ trunk/atahpt.c Tue Jul 26 00:07:05 2011 (r1388) @@ -18,6 +18,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#if defined(__i386__) || defined(__x86_64__) + #include <stdlib.h> #include <string.h> #include "flash.h" @@ -77,3 +79,7 @@ OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); return INB(io_base_addr + BIOS_ROM_DATA); } + +#else +#error PCI port I/O access is not supported on this architecture yet. +#endif Modified: trunk/satamv.c ============================================================================== --- trunk/satamv.c Mon Jul 25 23:12:57 2011 (r1387) +++ trunk/satamv.c Tue Jul 26 00:07:05 2011 (r1388) @@ -19,6 +19,7 @@ */ /* Datasheets are not public (yet?) */ +#if defined(__i386__) || defined(__x86_64__) #include <stdlib.h> #include "flash.h" @@ -182,3 +183,7 @@ { return satamv_indirect_chip_readb(addr); } + +#else +#error PCI port I/O access is not supported on this architecture yet. +#endif

1 0

[PATCH] flashrom: fix sparse warning: Using plain integer as NULL pointer
by Peter Hüwe 25 Jul '11

25 Jul '11

flashrom: fix sparse warning: Using plain integer as NULL pointer This patch fixes the "using plain integer as NULL pointer" warnings generated by running sparse on the flashrom source. Flashrom-Version: r1254 Signed-off-by: Peter Huewe <peterhuewe(a)gmx.de> --- cbtable.c | 2 +- chipset_enable.c | 2 +- cli_classic.c | 34 +++++++++++++++++----------------- physmap.c | 4 ++-- programmer.c | 2 +- serprog.c | 2 +- udelay.c | 8 ++++---- 7 files changed, 27 insertions(+), 27 deletions(-) diff --git a/cbtable.c b/cbtable.c index dbb2cff..f30a3ae 100644 --- a/cbtable.c +++ b/cbtable.c @@ -141,7 +141,7 @@ static struct lb_header *find_lb_table(void *base, unsigned long start, }; - return 0; + return NULL; } static void find_mainboard(struct lb_record *ptr, unsigned long addr) diff --git a/chipset_enable.c b/chipset_enable.c index 6d6008e..0896bce 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1173,7 +1173,7 @@ const struct penable chipset_enables[] = { int chipset_flash_enable(void) { - struct pci_dev *dev = 0; + struct pci_dev *dev = NULL; int ret = -2; /* Nothing! */ int i; diff --git a/cli_classic.c b/cli_classic.c index 1211989..88b70db 100644 --- a/cli_classic.c +++ b/cli_classic.c @@ -116,23 +116,23 @@ int cli_classic(int argc, char *argv[]) static const char optstring[] = "r:Rw:v:nVEfc:m:l:i:p:Lzh"; static const struct option long_options[] = { - {"read", 1, 0, 'r'}, - {"write", 1, 0, 'w'}, - {"erase", 0, 0, 'E'}, - {"verify", 1, 0, 'v'}, - {"noverify", 0, 0, 'n'}, - {"chip", 1, 0, 'c'}, - {"mainboard", 1, 0, 'm'}, - {"verbose", 0, 0, 'V'}, - {"force", 0, 0, 'f'}, - {"layout", 1, 0, 'l'}, - {"image", 1, 0, 'i'}, - {"list-supported", 0, 0, 'L'}, - {"list-supported-wiki", 0, 0, 'z'}, - {"programmer", 1, 0, 'p'}, - {"help", 0, 0, 'h'}, - {"version", 0, 0, 'R'}, - {0, 0, 0, 0} + {"read", 1, NULL, 'r'}, + {"write", 1, NULL, 'w'}, + {"erase", 0, NULL, 'E'}, + {"verify", 1, NULL, 'v'}, + {"noverify", 0, NULL, 'n'}, + {"chip", 1, NULL, 'c'}, + {"mainboard", 1, NULL, 'm'}, + {"verbose", 0, NULL, 'V'}, + {"force", 0, NULL, 'f'}, + {"layout", 1, NULL, 'l'}, + {"image", 1, NULL, 'i'}, + {"list-supported", 0, NULL, 'L'}, + {"list-supported-wiki", 0, NULL, 'z'}, + {"programmer", 1, NULL, 'p'}, + {"help", 0, NULL, 'h'}, + {"version", 0, NULL, 'R'}, + {NULL, 0, NULL, 0} }; char *filename = NULL; diff --git a/physmap.c b/physmap.c index 4641e8e..70156a6 100644 --- a/physmap.c +++ b/physmap.c @@ -180,7 +180,7 @@ static void *sys_physmap_rw_uncached(unsigned long phys_addr, size_t len) } } - virt_addr = mmap(0, len, PROT_WRITE | PROT_READ, MAP_SHARED, + virt_addr = mmap(NULL, len, PROT_WRITE | PROT_READ, MAP_SHARED, fd_mem, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } @@ -200,7 +200,7 @@ static void *sys_physmap_ro_cached(unsigned long phys_addr, size_t len) } } - virt_addr = mmap(0, len, PROT_READ, MAP_SHARED, + virt_addr = mmap(NULL, len, PROT_READ, MAP_SHARED, fd_mem_cached, (off_t)phys_addr); return MAP_FAILED == virt_addr ? ERROR_PTR : virt_addr; } diff --git a/programmer.c b/programmer.c index 0160867..5c1f963 100644 --- a/programmer.c +++ b/programmer.c @@ -30,7 +30,7 @@ int noop_shutdown(void) void *fallback_map(const char *descr, unsigned long phys_addr, size_t len) { /* FIXME: Should return phys_addr. */ - return 0; + return NULL; } /* No-op/fallback unmap() for programmers which don't need special handling */ diff --git a/serprog.c b/serprog.c index 2cdfea6..f869b07 100644 --- a/serprog.c +++ b/serprog.c @@ -541,7 +541,7 @@ static void sp_execute_opbuf_noflush(void) { if ((sp_max_write_n) && (sp_write_n_bytes)) sp_pass_writen(); - sp_stream_buffer_op(S_CMD_O_EXEC, 0, 0); + sp_stream_buffer_op(S_CMD_O_EXEC, 0, NULL); msg_pspew(MSGHEADER "Executed operation buffer of %d bytes\n", sp_opbuf_usage); sp_opbuf_usage = 0; diff --git a/udelay.c b/udelay.c index 153f510..feae827 100644 --- a/udelay.c +++ b/udelay.c @@ -45,11 +45,11 @@ static unsigned long measure_os_delay_resolution(void) struct timeval start, end; unsigned long counter = 0; - gettimeofday(&start, 0); + gettimeofday(&start, NULL); timeusec = 0; while (!timeusec && (++counter < 1000000000)) { - gettimeofday(&end, 0); + gettimeofday(&end, NULL); timeusec = 1000000 * (end.tv_sec - start.tv_sec) + (end.tv_usec - start.tv_usec); /* Protect against time going forward too much. */ @@ -68,9 +68,9 @@ static unsigned long measure_delay(int usecs) unsigned long timeusec; struct timeval start, end; - gettimeofday(&start, 0); + gettimeofday(&start, NULL); myusec_delay(usecs); - gettimeofday(&end, 0); + gettimeofday(&end, NULL); timeusec = 1000000 * (end.tv_sec - start.tv_sec) + (end.tv_usec - start.tv_usec); /* Protect against time going forward too much. */ -- 1.7.2.2

3 2

Re: [flashrom] [PATCH] Fix NULL pointer reference in board_flash_enable.
by Maciej Pijanka 25 Jul '11

25 Jul '11

On Fri, 12 Mar 2010, Michael Karcher wrote: > Was introduced in r926. Found by Henrik Kretzschmar <henne(a)nachtwindheim.de>. > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Imo looks sane and should be commited. Acked-by: Maciej Pijanka <maciej.pijanka(a)gmail.com> > --- > board_enable.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/board_enable.c b/board_enable.c > index aa463bc..0e89137 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -1445,7 +1445,7 @@ int board_flash_enable(const char *vendor, const char *part) > if (!board) > board = board_match_pci_card_ids(); > > - if (board->status == NT) { > + if (board && board->status == NT) { > if (!force_boardenable) > { > printf("WARNING: Your mainboard is %s %s, but the mainboard-specific\n" > -- -- Maciej Pijanka I don't fear computers, I fear lack of them -- Isaac Asimov

2 1

[PATCH] Random manpage improvements and updates
by Uwe Hermann 25 Jul '11

25 Jul '11

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1387 - trunk
by repository service 25 Jul '11

25 Jul '11

Author: uwe Date: Mon Jul 25 23:12:57 2011 New Revision: 1387 URL: http://flashrom.org/trac/flashrom/changeset/1387 Log: Random manpage improvements and updates. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.8 Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Mon Jul 25 22:38:52 2011 (r1386) +++ trunk/flashrom.8 Mon Jul 25 23:12:57 2011 (r1387) @@ -1,4 +1,4 @@ -.TH FLASHROM 8 "Jun 14, 2011" +.TH FLASHROM 8 "Jul 25, 2011" .SH NAME flashrom \- detect, read, write, verify and erase flash chips .SH SYNOPSIS @@ -12,13 +12,14 @@ .B flashrom is a utility for detecting, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system -using a supported mainboard, but it also supports flashing of network cards -(NICs), SATA controller cards, and other external devices which can program -flash chips. +using a supported mainboard. However, it also supports various external +PCI/USB/parallel-port/serial-port based devices which can program flash chips, +including some network cards (NICs), SATA/IDE controller cards, graphics cards, +the Bus Pirate device, various FTDI FT2232/FT4232H based USB devices, and more. .PP It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40, -and TSOP48 chips, which use various protocols such as LPC, FWH, parallel flash, -or SPI. +TSOP48, and BGA chips, which use various protocols such as LPC, FWH, +parallel flash, or SPI. .SH OPTIONS .B IMPORTANT: Please note that the command line interface for flashrom will change before @@ -30,7 +31,7 @@ or no operation. If no operation is specified, flashrom will only probe for flash chips. It is recommended that if you try flashrom the first time on a system, you run it -in probe only mode and check the output. Also you are advised to make a +in probe-only mode and check the output. Also you are advised to make a backup of your current ROM contents with .B \-r before you try to write a new image. @@ -38,6 +39,7 @@ .B "\-r, \-\-read <file>" Read flash ROM contents and save them into the given .BR <file> . +If the file already exists, it will be overwritten. .TP .B "\-w, \-\-write <file>" Write @@ -144,7 +146,8 @@ from flash layout. .TP .B "\-L, \-\-list\-supported" -List the flash chips, chipsets, mainboards, and PCI card "programmers" +List the flash chips, chipsets, mainboards, and external programmers +(including PCI, USB, parallel port, and serial port based devices) supported by flashrom. .sp There are many unlisted boards which will work out of the box, without @@ -160,8 +163,9 @@ Same as .BR \-\-list\-supported , but outputs the supported hardware in MediaWiki syntax, so that it can be -easily pasted into the wiki page at http://www.flashrom.org/. Please note -that MediaWiki output is not compiled in by default. +easily pasted into the wiki page at +.BR http://www.flashrom.org/ . +Please note that MediaWiki output is not compiled in by default. .TP .B "\-p, \-\-programmer <name>[:parameter[,parameter[,parameter]]]" Specify the programmer device. Currently supported are: @@ -489,7 +493,7 @@ four. Make sure to not forget the "0x" prefix for hexadecimal port addresses. .sp More information about the hardware is available at -http://rayer.ic.cz/elektro/spipgm.htm +.BR http://rayer.ic.cz/elektro/spipgm.htm . .TP .BR "ogp_spi " programmer The flash ROM chip to access must be specified with the @@ -517,7 +521,7 @@ section above. .sp More information about the hardware is available at -http://wiki.opengraphics.org +.BR http://wiki.opengraphics.org . .SH EXIT STATUS flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem (/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails. @@ -571,8 +575,10 @@ needs PCI configuration space read access and raw memory access. .sp On OpenBSD, you can obtain raw access permission by setting -securelevel=-1 in /etc/rc.securelevel and rebooting, or rebooting into single -user mode. +.B "securelevel=-1" +in +.B "/etc/rc.securelevel" +and rebooting, or rebooting into single user mode. .SH BUGS Please report any bugs at .sp @@ -590,6 +596,10 @@ backup. This is caused by the embedded controller (EC) present in many laptops, which interacts badly with any flash attempts. This is a hardware limitation and flashrom will attempt to detect it and abort immediately for safety reasons. +.sp +More information about flashrom on laptops is available from +.sp +.B " http://www.flashrom.org/Laptops" .SH LICENSE .B flashrom is covered by the GNU General Public License (GPL), version 2. Some files are

1 0

Re: [flashrom] [PATCH] fix output for multiple found flash chips
by Stefan Tauner 25 Jul '11

25 Jul '11

On Fri, 24 Jun 2011 19:03:52 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > - missing quotes > - missing commas > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > cli_classic.c | 7 ++++--- > 1 files changed, 4 insertions(+), 3 deletions(-) > > diff --git a/cli_classic.c b/cli_classic.c > index 59096a0..aba6edf 100644 > --- a/cli_classic.c > +++ b/cli_classic.c > @@ -373,9 +373,10 @@ int cli_classic(int argc, char *argv[]) > } > > if (chipcount > 1) { > - printf("Multiple flash chips were detected:"); > - for (i = 0; i < chipcount; i++) > - printf(" %s", flashes[i].name); > + printf("Multiple flash chips were detected: \"%s\"", > + flashes[0].name); > + for (i = 1; i < chipcount; i++) > + printf(", \"%s\"", flashes[i].name); > printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); > programmer_shutdown(); > exit(1); since no one else has reviewed this yet and it is fairly trivial, i will add it with my next "tested stuff" commit -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 6

[commit] r1386 - trunk
by repository service 25 Jul '11

25 Jul '11

Author: stefanct Date: Mon Jul 25 22:38:52 2011 New Revision: 1386 URL: http://flashrom.org/trac/flashrom/changeset/1386 Log: add a bunch of new/tested stuff and various small changes 5 - mark EN25F80 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007329.html - mark W25Q16 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007151.html - mark W39V040A as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007161.html - mark Pm25LV040 as fully tested reported by TL1 on IRC - mark W49F002U/N as fully tested http://paste.flashrom.org/view.php?id=733g - mark W39V080FA as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007225.html - add ASUS P4S533-X to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007200.html - add ASUS M4A785TD-V EVO to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007329.html - add GA-945PL-S3P (rev. 6.6) to the list of supported boards reported by TL1 on IRC - add MS-7142 (K8MM-V) to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007161.html - add MS-7369 (K9N Neo V2) to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007181.html - add X7DBT-INF to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-July/007225.html - mark SiS 645DX chipset enable as OK http://www.flashrom.org/pipermail/flashrom/2011-July/007200.html - mark SiS 651 chipset enable as OK http://paste.flashrom.org/view.php?id=733 - move intel_ich_gpio34_raise to the correct line(s) - change the output of unlock_w39_fwh_block from 0x%x to 0x%08x - fix output for untested chipset enables (missing space) - reorder the board enable in print.c entry for GA-8SIMLH added in r1385. - minor other fixes - fix output for multiple found flash chips by adding quotes and commas - similarly fix output of "Found/Assuming" chips Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> the last two points are Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> everything else is Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/cli_classic.c trunk/flashchips.c trunk/flashrom.c trunk/print.c trunk/w39.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/board_enable.c Mon Jul 25 22:38:52 2011 (r1386) @@ -1475,15 +1475,6 @@ /* * Suited for: - * - ASUS A8Jm (laptop): Intel 945 + ICH7 - */ -static int intel_ich_gpio34_raise(void) -{ - return intel_ich_gpio_set(34, 1); -} - -/* - * Suited for: * - MSI MS-7046: LGA775 + 915P + ICH6 */ static int intel_ich_gpio19_raise(void) @@ -1521,6 +1512,15 @@ /* * Suited for: + * - ASUS A8Jm (laptop): Intel 945 + ICH7 + */ +static int intel_ich_gpio34_raise(void) +{ + return intel_ich_gpio_set(34, 1); +} + +/* + * Suited for: * - ASUS M6Ne (laptop): socket 479M (guessed) + Intel 855PM + ICH4-M */ static int intel_ich_gpio43_raise(void) @@ -2035,8 +2035,8 @@ {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, P3, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x2570, 0x1458, 0x2570, 0x8086, 0x24d0, 0, 0, "^8IP775/-G$",NULL, NULL, P3, "GIGABYTE", "GA-8IP775", 0, OK, intel_ich_gpio32_raise}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, - {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7002, 0x1458, 0x5004, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, + {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7002, 0x1458, 0x5004, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10de, 0x00e4, 0x1458, 0x0c11, 0x10de, 0x00e0, 0x1458, 0x0c11, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8NS Pro-939", 0, NT, nvidia_mcp_gpio0a_raise}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/chipset_enable.c Mon Jul 25 22:38:52 2011 (r1386) @@ -1031,10 +1031,10 @@ {0x1039, 0x0635, NT, "SiS", "635", enable_flash_sis540}, {0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis540}, {0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis540}, - {0x1039, 0x0646, NT, "SiS", "645DX", enable_flash_sis540}, + {0x1039, 0x0646, OK, "SiS", "645DX", enable_flash_sis540}, {0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis540}, {0x1039, 0x0650, NT, "SiS", "650", enable_flash_sis540}, - {0x1039, 0x0651, NT, "SiS", "651", enable_flash_sis540}, + {0x1039, 0x0651, OK, "SiS", "651", enable_flash_sis540}, {0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis540}, {0x1039, 0x0661, OK, "SiS", "661", enable_flash_sis540}, {0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis540}, @@ -1229,7 +1229,7 @@ msg_pinfo("Found chipset \"%s %s\"", chipset_enables[i].vendor_name, chipset_enables[i].device_name); - msg_pdbg("with PCI ID %04x:%04x", + msg_pdbg(" with PCI ID %04x:%04x", chipset_enables[i].vendor_id, chipset_enables[i].device_id); msg_pinfo(". "); Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/cli_classic.c Mon Jul 25 22:38:52 2011 (r1386) @@ -380,9 +380,10 @@ } if (chipcount > 1) { - printf("Multiple flash chips were detected:"); - for (i = 0; i < chipcount; i++) - printf(" %s", flashes[i].name); + printf("Multiple flash chips were detected: \"%s\"", + flashes[0].name); + for (i = 1; i < chipcount; i++) + printf(", \"%s\"", flashes[i].name); printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); ret = 1; goto out_shutdown; Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/flashchips.c Mon Jul 25 22:38:52 2011 (r1386) @@ -3075,7 +3075,7 @@ .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5047,7 +5047,7 @@ .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -7878,7 +7878,7 @@ .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -8384,9 +8384,9 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, .block_erasers = { { @@ -8585,7 +8585,7 @@ .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -8705,7 +8705,7 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/flashrom.c Mon Jul 25 22:38:52 2011 (r1386) @@ -1201,7 +1201,7 @@ snprintf(location, sizeof(location), "on %s", programmer_table[programmer].name); tmp = flashbuses_to_text(flash->bustype); - msg_cinfo("%s chip \"%s %s\" (%d kB, %s) %s.\n", + msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) %s.\n", force ? "Assuming" : "Found", fill_flash->vendor, fill_flash->name, fill_flash->total_size, tmp, location); free(tmp); @@ -1711,7 +1711,7 @@ ret = 1; } /* It would be favorable if we could also check for correct terminaion - * of the follwing arrays, but we don't know their size in here... + * of the following arrays, but we don't know their sizes in here... * For 'flashchips' we check the first element to be non-null. In the * other cases there exist use cases where the first element can be * null. */ Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/print.c Mon Jul 25 22:38:52 2011 (r1386) @@ -448,6 +448,7 @@ B("ASUS", "M3A76-CM", 1, "http://www.asus.com/product.aspx?P_ID=aU8effdifLvraVze", NULL), B("ASUS", "M3A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL), B("ASUS", "M4A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=0KyowHKUFAQqH2DO", NULL), + B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/product.aspx?P_ID=fcsXWSxnhzZE9rnR", NULL), B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/product.aspx?P_ID=QHbvGVB1mXmmD8qQ", NULL), B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), @@ -470,13 +471,14 @@ B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), + B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), B("ASUS", "P4S800-MX", 1, "http://www.asus.com/product.aspx?P_ID=Bb57zoJhmO1Qkcrh", NULL), B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL), B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/product.aspx?P_ID=PYvbfOokwxUzJky3", NULL), - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), + B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), @@ -534,8 +536,9 @@ B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), - B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), + B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), + B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), @@ -602,6 +605,7 @@ B("MSI", "MS-7061 (KM3M-V/KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), + B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL), B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL), B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/product/mb/PM8M3-V.html", NULL), @@ -612,6 +616,7 @@ B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL), B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), + B("MSI", "MS-7369 (K9N Neo V2)", 1, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), @@ -648,6 +653,7 @@ B("Sun", "Fire x4600", 0, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), B("Supermicro", "H8QC8", 1, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), B("Supermicro", "X5DP8-G2", 1, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), + B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), Modified: trunk/w39.c ============================================================================== --- trunk/w39.c Mon Jul 25 19:25:24 2011 (r1385) +++ trunk/w39.c Mon Jul 25 22:38:52 2011 (r1386) @@ -70,10 +70,10 @@ if (locking & ((1 << 2) | (1 << 0))) { /* Lockdown active? */ if (locking & (1 << 1)) { - msg_cerr("Can't unlock block at 0x%x!\n", offset); + msg_cerr("Can't unlock block at 0x%08x!\n", offset); return -1; } else { - msg_cdbg("Unlocking block at 0x%x\n", offset); + msg_cdbg("Unlocking block at 0x%08x\n", offset); chip_writeb(0, wrprotect); } }

1 0

No luck with a Marvell 88SX7042 (Adaptec 1430SA)
by Tim Small 25 Jul '11

25 Jul '11

Hi, The Adaptec 1430SA is a Marvell 88SX7042 based controller. It has a different vendor/device ID pair when using the Adaptec firmware, so I added this in: --- satamv.c (revision 1364) +++ satamv.c (working copy) @@ -30,6 +30,7 @@ const struct pcidev_status satas_mv[] = { /* 88SX6041 and 88SX6042 are the same according to the datasheet. */ {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"}, + {0x9005, 0x0243, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II (Adaptec 1430SA)"}, {}, }; ... but it doesn't seem to work on the Adaptec card: flashrom -p satamv:pci=06:00.0 flashrom v0.9.3-r1364 on Linux 2.6.39-2-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found "Marvell 88SX7042 PCI-e 4-port SATA-II (Adaptec 1430SA)" (9005:0243, BDF 06:00.0). Warning! Either the straps are incorrect or you have no flash or someone overwrote the strap values! No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. The eeprom on the card is an AMD Am29LV004BT (which is supported for probing). Cheers, Tim. -- South East Open Source Solutions Limited Registered in England and Wales with company number 06134732. Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ VAT number: 900 6633 53 http://seoss.co.uk/ +44-(0)1273-808309

2 3

Re: [flashrom] [PATCH] Add support for the GIGABYTE GA-8SIMLH board.
by Stefan Tauner 25 Jul '11

25 Jul '11

On Sun, 24 Jul 2011 20:47:12 +0200 Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> wrote: > The usage of the GPIO output register as bitmap can be confirmed from the > vendor board enable code, so the comment has been deleted. It really is > (1<<gpionumber). > > lspci: http://paste.flashrom.org/view.php?id=729 > superiotool: http://paste.flashrom.org/view.php?id=730 > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> since it has apparently worked (http://paste.flashrom.org/view.php?id=733) and looks fine otherwise, this is Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> two minor nitpicks: > + {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7012, 0x1458, 0xa002, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, the second device is the sound card, which could presumably be disabled. there is only one other device with a gigabyte vendor id: 1458:5004 (usb2.0 controller). not sure if that would be better, just wanted to mention it. > B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), > + B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), > B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), P < S, so the new one should be below the GA-8PE667. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[commit] r1385 - trunk
by repository service 25 Jul '11

25 Jul '11

Author: mkarcher Date: Mon Jul 25 19:25:24 2011 New Revision: 1385 URL: http://flashrom.org/trac/flashrom/changeset/1385 Log: Add support for the GIGABYTE GA-8SIMLH board. The usage of the GPIO output register as bitmap can be confirmed from the vendor board enable code, so the comment has been deleted. It really is (1<<gpionumber). flashrom -V: http://paste.flashrom.org/view.php?id=728 lspci: http://paste.flashrom.org/view.php?id=729 superiotool: http://paste.flashrom.org/view.php?id=730 test report: http://paste.flashrom.org/view.php?id=733 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Jul 25 00:21:57 2011 (r1384) +++ trunk/board_enable.c Mon Jul 25 19:25:24 2011 (r1385) @@ -1725,12 +1725,13 @@ } /* - * Enable some GPIO pin on SiS southbridge. + * Enable some GPIO pin on SiS southbridge and enables SIO flash writes. * * Suited for: * - MSI 651M-L: SiS651 / SiS962 + * - GIGABYTE GA-8SIMLH */ -static int board_msi_651ml(void) +static int sis_gpio0_raise_and_w836xx_memw(void) { struct pci_dev *dev; uint16_t base, temp; @@ -1741,7 +1742,6 @@ return 1; } - /* Registers 68 and 64 seem like bitmaps. */ base = pci_read_word(dev, 0x74); temp = INW(base + 0x68); temp &= ~(1 << 0); /* Make pin output? */ @@ -2035,6 +2035,7 @@ {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, P3, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x2570, 0x1458, 0x2570, 0x8086, 0x24d0, 0, 0, "^8IP775/-G$",NULL, NULL, P3, "GIGABYTE", "GA-8IP775", 0, OK, intel_ich_gpio32_raise}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, + {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7002, 0x1458, 0x5004, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, @@ -2063,7 +2064,7 @@ {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, P3, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, {0x1106, 0x3148, 0 , 0 , 0x1106, 0x3177, 0 , 0 , NULL, "msi", "ms6787", P3, "MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24d3, 0x1462, 0x7880, 0x8086, 0x2570, 0, 0, NULL, NULL, NULL, P3, "MSI", "MS-6788-040 (848P NeoV)", 0, OK, intel_ich_gpio32_raise}, - {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, P3, "MSI", "MS-7005 (651M-L)", 0, OK, board_msi_651ml}, + {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, P3, "MSI", "MS-7005 (651M-L)", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, P3, "MSI", "MS-7025 (K8N Neo2 Platinum)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, P3, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, {0x8086, 0x244b, 0x1462, 0x3910, 0x8086, 0x2442, 0x1462, 0x3910, NULL, NULL, NULL, P3, "MSI", "MS-6391 (845 Pro4)", 0, OK, intel_ich_gpio23_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Jul 25 00:21:57 2011 (r1384) +++ trunk/print.c Mon Jul 25 19:25:24 2011 (r1385) @@ -534,6 +534,7 @@ B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), + B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),

1 0

Re: [flashrom] [Patch] Add support for EN25Q series SPI flash chips
by Stefan Tauner 25 Jul '11

25 Jul '11

On Wed, 22 Jun 2011 16:04:42 -0700 David Hendricks <dhendrix(a)google.com> wrote: > Thanks for the review! I've attached an updated patch to address your > comments. > > I'm still not sure what the best course of action is for dealing with the > D16 versus Q16 evil twin scenario. Let's see if Carl-Daniel has further > comments. > > New patch is: > Signed-off-by: David Hendricks <dhendrix(a)google.com> since carl-daniel wants to push 0.9.4 soon (no, really! ;) i have committed your patch with some small changes which i think make it better (including the D16 -> Q16 rename) in r1384. thank you! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1384 - trunk
by repository service 25 Jul '11

25 Jul '11

Author: stefanct Date: Mon Jul 25 00:21:57 2011 New Revision: 1384 URL: http://flashrom.org/trac/flashrom/changeset/1384 Log: add support for EN25Q(H) series SPI flash chips - EN25Q40 - EN25Q80 - EN25Q16 (half-evil twin of already supported EN25D16, hence merged) - EN25Q32(A/B) - EN25Q64 - EN25Q128 - EN25QH16 Signed-off-by: David Hendricks <dhendrix(a)google.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun Jul 24 20:41:13 2011 (r1383) +++ trunk/flashchips.c Mon Jul 25 00:21:57 2011 (r1384) @@ -2923,42 +2923,6 @@ { .vendor = "Eon", - .name = "EN25D16", - .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25D16, - .total_size = 2048, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", .name = "EN25F05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, @@ -3205,6 +3169,259 @@ }, { + .vendor = "Eon", + .name = "EN25Q40", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q40, + .total_size = 512, + .page_size = 256, + /* TODO: chip features 256-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q80(A)", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q80, + .total_size = 1024, + .page_size = 256, + /* TODO: chip features 256-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + /* Note: EN25D16 is an evil twin which shares the model ID + but has different write protection capabilities */ + .vendor = "Eon", + .name = "EN25Q16", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q16, + .total_size = 2048, + .page_size = 256, + /* TODO: EN25D16 features 512-byte one-time programmable region, + * EN25Q16 features a 128-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + /* not supported by Q16 version */ + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q32(A/B)", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q32, + .total_size = 4096, + .page_size = 256, + /* TODO: chip features 512-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q64", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q64, + .total_size = 8192, + .page_size = 256, + /* TODO: chip features 512-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q128", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q128, + .total_size = 16384, + .page_size = 256, + /* TODO: chip features 512-byte one-time programmable region */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Eon", + .name = "EN25QH16", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH16, + .total_size = 2048, + .page_size = 256, + /* TODO: chip features 512-byte one-time programmable region + * and supports SFDP. + */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 2048, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 2048, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { .vendor = "Eon", .name = "EN29F010", .bustype = CHIP_BUSTYPE_PARALLEL, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun Jul 24 20:41:13 2011 (r1383) +++ trunk/flashchips.h Mon Jul 25 00:21:57 2011 (r1384) @@ -232,7 +232,6 @@ #define EON_EN25B64 0x2017 /* Same as P64 */ #define EON_EN25B64T 0x46 #define EON_EN25B64B 0x36 -#define EON_EN25D16 0x3015 #define EON_EN25F05 0x3110 #define EON_EN25F10 0x3111 #define EON_EN25F20 0x3112 @@ -240,6 +239,13 @@ #define EON_EN25F80 0x3114 #define EON_EN25F16 0x3115 #define EON_EN25F32 0x3116 +#define EON_EN25Q40 0x3013 +#define EON_EN25Q80 0x3014 +#define EON_EN25Q16 0x3015 /* Same as EN25D16 */ +#define EON_EN25Q32 0x3016 /* Same as EN25Q32A and EN25Q32B */ +#define EON_EN25Q64 0x3017 +#define EON_EN25Q128 0x3018 +#define EON_EN25QH16 0x7015 #define EON_EN29F512 0x7F21 #define EON_EN29F010 0x20 #define EON_EN29F040A 0x7F04

1 0

Asus_EEE_PC_1201N_flashrom_v0.9.3-r1383
by Filatov Sergey Dmitrievich 24 Jul '11

24 Jul '11

-- Regards, Sergey Filatov

1 0

[PATCH] Man page fixes: dummy, satamv, it87
by Carl-Daniel Hailfinger 24 Jul '11

24 Jul '11

Man page fixes: - Add dummy programmer flash chip emulation - Add satamv programmer - Merge it87spi programmer into internal section - Correct formatting of pci= parameter Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-manpage_dummy_satamv_it87spi/flashrom.8 =================================================================== --- flashrom-manpage_dummy_satamv_it87spi/flashrom.8 (Revision 1380) +++ flashrom-manpage_dummy_satamv_it87spi/flashrom.8 (Arbeitskopie) @@ -168,7 +168,7 @@ .sp .BR "* internal" " (default, for in-system flashing in the mainboard)" .sp -.BR "* dummy" " (just prints all operations and accesses)" +.BR "* dummy" " (prints all operations and accesses, can emulate flash chips)" .sp .BR "* nic3com" " (for flash ROMs on 3COM network cards)" .sp @@ -192,9 +192,6 @@ .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI \ -translation unit)" -.sp .BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \ based USB SPI programmer)" .sp @@ -286,17 +283,17 @@ .B " flashrom \-p internal:boardmismatch=force" .sp If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus -translation, flashrom should autodetect that configuration. You can use the +translation, flashrom should autodetect that configuration. If you want to +set the I/O base port of the IT87 series SPI controller manually instead of +using the value provided by the BIOS, use the .sp .B " flashrom \-p internal:it87spiport=portnum" .sp -syntax as explained in the -.B it87spi -programmer section to use a non-default port for controlling the IT87 series -Super I/O. In the unlikely case flashrom doesn't detect an active -IT87 LPC<->SPI bridge, you can try to force recognition by using the -.B it87spi -programmer. +syntax where +.B portnum +is the I/O port number (must be a multiple of 8). In the unlikely case +flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug +report so we can diagnose the problem. .sp Using flashrom on laptops is dangerous and may easily make your hardware unusable (see also the @@ -322,7 +319,9 @@ .BR "dummy " programmer An optional parameter specifies the bus types it should support. For that you have to use the -.B "flashrom \-p dummy:bus=[type[+type[+type]]]" +.sp +.B " flashrom \-p dummy:bus=[type[+type[+type]]]" +.sp syntax where .B type can be @@ -332,6 +331,51 @@ .sp Example: .B "flashrom \-p dummy:bus=lpc+fwh" +.sp +The dummy programmer supports flash chip emulation for automated self-tests +without hardware access. If you want to emulate a flash chip, use the +.sp +.B " flashrom \-p dummy:emulate=chip" +.sp +syntax where +.B chip +is one of the following chips (please specify only the chip name, not the +vendor): +.sp +.RB "* ST " M25P10.RES " SPI flash chip (RES, page write)" +.sp +.RB "* SST " SST25VF040.REMS " SPI flash chip (REMS, byte write)" +.sp +.RB "* SST " SST25VF032B " SPI flash chip (RDID, AAI write)" +.sp +Example: +.B "flashrom -p dummy:emulate=SST25VF040.REMS" +.sp +If you use flash chip emulation, flash image persistence is available as well +by using the +.sp +.B " flashrom \-p dummy:emulate=chip,image=image.rom" +.sp +syntax where +.B image.rom +is the file where the simulated chip contents are read on flashrom startup and +where the chip contents on flashrom shutdown are written to. +.sp +Example: +.B "flashrom -p dummy:emulate=M25P10.RES,image=dummy.bin" +.sp +If you use SPI flash chip emulation for a chip which supports SPI page write +with the default opcode, you can set the maximum allowed write chunk size with +the +.sp +.B " flashrom \-p dummy:emulate=chip,spi_write_256_chunksize=size" +.sp +syntax where +.B size +is the number of bytes (min. 1, max. 256). +.sp +Example: +.B "flashrom -p dummy:emulate=M25P10.RES,spi_write_256_chunksize=5" .TP .BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " nicintel\ " , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii\ @@ -339,7 +383,9 @@ These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported by the selected programmer is installed in your system. The syntax is -.BR "flashrom \-p xxxx:pci=bb:dd.f" , +.sp +.BR " flashrom \-p xxxx:pci=bb:dd.f" , +.sp where .B xxxx is the name of the programmer @@ -353,19 +399,6 @@ Example: .B "flashrom \-p nic3com:pci=05:04.0" .TP -.BR "it87spi " programmer -An optional -.B it87spiport -parameter sets the I/O base port of the IT87 series SPI controller -interface to the port specified in the parameter instead of using the port -address set by the BIOS. For that you have to use the -.sp -.B " flashrom \-p it87spi:it87spiport=portnum" -.sp -syntax where -.B portnum -is an I/O port number which must be a multiple of 8. -.TP .BR "ft2232_spi " programmer An optional parameter specifies the controller type and interface/port it should support. For that you have to use the @@ -487,9 +520,6 @@ needs raw memory access, PCI configuration space access, raw I/O port access (x86) and MSR access (x86). .sp -.B it87spi -needs raw I/O port access (x86). -.sp .BR nic3com ", " nicrealtek ", " nicsmc1211 " and " nicnatsemi " need PCI configuration space read access and raw I/O port access. .sp @@ -505,6 +535,10 @@ .B satasii needs PCI configuration space read access and raw memory access. .sp +.B satamv +needs PCI configuration space read access, raw I/O port access and raw memory +access. +.sp .B serprog needs TCP access to the network or userspace access to a serial port. .sp @@ -517,8 +551,8 @@ .B dummy needs no access permissions at all. .sp -.BR internal ", " it87spi ", " nic3com ", " nicrealtek ", " nicsmc1211 ", " -.BR nicnatsemi ", " "gfxnvidia" ", " drkaiser ", " satasii " and " atahpt +.BR internal ", " nic3com ", " nicrealtek ", " nicsmc1211 ", " nicnatsemi ", " +.BR gfxnvidia" ", " drkaiser ", " satasii ", " satamv " and " atahpt have to be run as superuser/root, and need additional raw access permission. .sp .BR serprog ", " buspirate_spi ", " dediprog " and " ft2232_spi -- http://www.hailfinger.org/

3 7

Asus EEE PC 1201N netbook
by Filatov Sergey Dmitrievich 24 Jul '11

24 Jul '11

flashrom log in attachment. -- Regards, Sergey Filatov

2 1

Gigabyte
by halloaron＠web.de 24 Jul '11

24 Jul '11

http://www.flashrom.org/pipermail/flashrom/2011-July/007348.html Its works. Acked. ___________________________________________________________ Schon gehört? WEB.DE hat einen genialen Phishing-Filter in die Toolbar eingebaut! http://produkte.web.de/go/toolbar

1 0

[PATCH] Add support for the GIGABYTE GA-8SIMLH board.
by Michael Karcher 24 Jul '11

24 Jul '11

The usage of the GPIO output register as bitmap can be confirmed from the vendor board enable code, so the comment has been deleted. It really is (1<<gpionumber). lspci: http://paste.flashrom.org/view.php?id=729 superiotool: http://paste.flashrom.org/view.php?id=730 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 9 +++++---- print.c | 1 + 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/board_enable.c b/board_enable.c index b3dc58e..1a2c108 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1725,12 +1725,13 @@ static int via_apollo_gpo0_lower(void) } /* - * Enable some GPIO pin on SiS southbridge. + * Enable some GPIO pin on SiS southbridge and enables SIO flash writes. * * Suited for: * - MSI 651M-L: SiS651 / SiS962 + * - GIGABYTE GA-8SIMLH */ -static int board_msi_651ml(void) +static int sis_gpio0_raise_and_w836xx_memw(void) { struct pci_dev *dev; uint16_t base, temp; @@ -1741,7 +1742,6 @@ static int board_msi_651ml(void) return 1; } - /* Registers 68 and 64 seem like bitmaps. */ base = pci_read_word(dev, 0x74); temp = INW(base + 0x68); temp &= ~(1 << 0); /* Make pin output? */ @@ -2035,6 +2035,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, P3, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x2570, 0x1458, 0x2570, 0x8086, 0x24d0, 0, 0, "^8IP775/-G$",NULL, NULL, P3, "GIGABYTE", "GA-8IP775", 0, OK, intel_ich_gpio32_raise}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, + {0x1039, 0x0651, 0x1039, 0x0651, 0x1039, 0x7012, 0x1458, 0xa002, "^GA-8SIMLH$",NULL, NULL, P3, "GIGABYTE", "GA-8SIMLH", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, P3, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, P3, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, @@ -2063,7 +2064,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, P3, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, {0x1106, 0x3148, 0 , 0 , 0x1106, 0x3177, 0 , 0 , NULL, "msi", "ms6787", P3, "MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24d3, 0x1462, 0x7880, 0x8086, 0x2570, 0, 0, NULL, NULL, NULL, P3, "MSI", "MS-6788-040 (848P NeoV)", 0, OK, intel_ich_gpio32_raise}, - {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, P3, "MSI", "MS-7005 (651M-L)", 0, OK, board_msi_651ml}, + {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, P3, "MSI", "MS-7005 (651M-L)", 0, OK, sis_gpio0_raise_and_w836xx_memw}, {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, P3, "MSI", "MS-7025 (K8N Neo2 Platinum)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, P3, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, {0x8086, 0x244b, 0x1462, 0x3910, 0x8086, 0x2442, 0x1462, 0x3910, NULL, NULL, NULL, P3, "MSI", "MS-6391 (845 Pro4)", 0, OK, intel_ich_gpio23_raise}, diff --git a/print.c b/print.c index 0db0339..2cf89f1 100644 --- a/print.c +++ b/print.c @@ -532,6 +532,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), + B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), -- 1.7.5.4

1 0

[commit] r1383 - trunk
by repository service 24 Jul '11

24 Jul '11

Author: hailfinger Date: Sun Jul 24 20:41:13 2011 New Revision: 1383 URL: http://flashrom.org/trac/flashrom/changeset/1383 Log: Man page fixes: - Finish dummy programmer description - Add satamv programmer - Merge it87spi programmer into internal section - Cosmetics Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashrom.8 Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Sun Jul 24 18:30:31 2011 (r1382) +++ trunk/flashrom.8 Sun Jul 24 20:41:13 2011 (r1383) @@ -168,7 +168,7 @@ .sp .BR "* internal" " (default, for in-system flashing in the mainboard)" .sp -.BR "* dummy" " (just prints all operations and accesses)" +.BR "* dummy" " (virtual programmer for testing flashrom)" .sp .BR "* nic3com" " (for flash ROMs on 3COM network cards)" .sp @@ -192,9 +192,6 @@ .sp .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)" .sp -.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI \ -translation unit)" -.sp .BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \ based USB SPI programmer)" .sp @@ -286,17 +283,17 @@ .B " flashrom \-p internal:boardmismatch=force" .sp If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus -translation, flashrom should autodetect that configuration. You can use the +translation, flashrom should autodetect that configuration. If you want to +set the I/O base port of the IT87 series SPI controller manually instead of +using the value provided by the BIOS, use the .sp .B " flashrom \-p internal:it87spiport=portnum" .sp -syntax as explained in the -.B it87spi -programmer section to use a non-default port for controlling the IT87 series -Super I/O. In the unlikely case flashrom doesn't detect an active -IT87 LPC<->SPI bridge, you can try to force recognition by using the -.B it87spi -programmer. +syntax where +.B portnum +is the I/O port number (must be a multiple of 8). In the unlikely case +flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug +report so we can diagnose the problem. .sp Using flashrom on laptops is dangerous and may easily make your hardware unusable (see also the @@ -320,9 +317,18 @@ dumb idea. .TP .BR "dummy " programmer +The dummy programmer operates on a buffer in memory only. It provides a safe +and fast way to test various aspects of flashrom and is mainly used in +development and while debugging. +.sp +It is able to emulate some chips to a certain degree (basic +identify/read/erase/write operations work). +.sp An optional parameter specifies the bus types it should support. For that you have to use the -.B "flashrom \-p dummy:bus=[type[+type[+type]]]" +.sp +.B " flashrom \-p dummy:bus=[type[+type[+type]]]" +.sp syntax where .B type can be @@ -332,6 +338,52 @@ .sp Example: .B "flashrom \-p dummy:bus=lpc+fwh" +.sp +The dummy programmer supports flash chip emulation for automated self-tests +without hardware access. If you want to emulate a flash chip, use the +.sp +.B " flashrom \-p dummy:emulate=chip" +.sp +syntax where +.B chip +is one of the following chips (please specify only the chip name, not the +vendor): +.sp +.RB "* ST " M25P10.RES " SPI flash chip (RES, page write)" +.sp +.RB "* SST " SST25VF040.REMS " SPI flash chip (REMS, byte write)" +.sp +.RB "* SST " SST25VF032B " SPI flash chip (RDID, AAI write)" +.sp +Example: +.B "flashrom -p dummy:emulate=SST25VF040.REMS" +.sp +If you use flash chip emulation, flash image persistence is available as well +by using the +.sp +.B " flashrom \-p dummy:emulate=chip,image=image.rom" +.sp +syntax where +.B image.rom +is the file where the simulated chip contents are read on flashrom startup and +where the chip contents on flashrom shutdown are written to. +.sp +Example: +.B "flashrom -p dummy:emulate=M25P10.RES,image=dummy.bin" +.sp +If you use SPI flash chip emulation for a chip which supports SPI page write +with the default opcode, you can set the maximum allowed write chunk size with +the +.sp +.B " flashrom \-p dummy:emulate=chip,spi_write_256_chunksize=size" +.sp +syntax where +.B size +is the number of bytes (min. 1, max. 256). +.sp +Example: +.sp +.B " flashrom -p dummy:emulate=M25P10.RES,spi_write_256_chunksize=5" .TP .BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " nicintel\ " , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii\ @@ -339,7 +391,9 @@ These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported by the selected programmer is installed in your system. The syntax is -.BR "flashrom \-p xxxx:pci=bb:dd.f" , +.sp +.BR " flashrom \-p xxxx:pci=bb:dd.f" , +.sp where .B xxxx is the name of the programmer @@ -353,19 +407,6 @@ Example: .B "flashrom \-p nic3com:pci=05:04.0" .TP -.BR "it87spi " programmer -An optional -.B it87spiport -parameter sets the I/O base port of the IT87 series SPI controller -interface to the port specified in the parameter instead of using the port -address set by the BIOS. For that you have to use the -.sp -.B " flashrom \-p it87spi:it87spiport=portnum" -.sp -syntax where -.B portnum -is an I/O port number which must be a multiple of 8. -.TP .BR "ft2232_spi " programmer An optional parameter specifies the controller type and interface/port it should support. For that you have to use the @@ -487,9 +528,6 @@ needs raw memory access, PCI configuration space access, raw I/O port access (x86) and MSR access (x86). .sp -.B it87spi -needs raw I/O port access (x86). -.sp .BR nic3com ", " nicrealtek ", " nicsmc1211 " and " nicnatsemi " need PCI configuration space read access and raw I/O port access. .sp @@ -505,6 +543,10 @@ .B satasii needs PCI configuration space read access and raw memory access. .sp +.B satamv +needs PCI configuration space read access, raw I/O port access and raw memory +access. +.sp .B serprog needs TCP access to the network or userspace access to a serial port. .sp @@ -517,8 +559,8 @@ .B dummy needs no access permissions at all. .sp -.BR internal ", " it87spi ", " nic3com ", " nicrealtek ", " nicsmc1211 ", " -.BR nicnatsemi ", " "gfxnvidia" ", " drkaiser ", " satasii " and " atahpt +.BR internal ", " nic3com ", " nicrealtek ", " nicsmc1211 ", " nicnatsemi ", " +.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv " and " atahpt have to be run as superuser/root, and need additional raw access permission. .sp .BR serprog ", " buspirate_spi ", " dediprog " and " ft2232_spi

1 0

[RFC] flashrom 0.9.4 plans
by Carl-Daniel Hailfinger 24 Jul '11

24 Jul '11

Hi, there are so many features I wanted to have in flashrom 0.9.4, but delaying the release further is not going to help anyone. Stefan Tauner probably has a few odd fixes in his queue, and I'm trying to find an acceptable fix for a segfault, and to spot the logic inversion which makes the write failure recovery code spit out the wrong message. I found a (corruption) bug in ICH IDSEL handling, need to post that fix and get it tested. Anything else we need for 0.9.4? Do we have any other unmerged bugfixes? Doc fixes? The man page is missing some features. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 5

[commit] r1382 - trunk
by repository service 24 Jul '11

24 Jul '11

Author: stefanct Date: Sun Jul 24 18:30:31 2011 New Revision: 1382 URL: http://flashrom.org/trac/flashrom/changeset/1382 Log: mark some ck804 boards as not working P5N-E SLI, EP-8NPA7I and EP-9NPA7I all need at least this patch: http://patchwork.coreboot.org/patch/2125/ the P5N-E also needs a board enable: http://patchwork.coreboot.org/patch/3298/ mark the boards as not working until those are merged. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Jul 24 17:34:56 2011 (r1381) +++ trunk/board_enable.c Sun Jul 24 18:30:31 2011 (r1382) @@ -2027,7 +2027,7 @@ {0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, P3, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, P3, "Elitegroup", "K7VTA3", 256, OK, NULL}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, P3, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, - {0x10DE, 0x005E, 0x1695, 0x1010, 0x10DE, 0x0050, 0x1695, 0x1010, NULL, NULL, NULL, P3, "EPoX", "EP-8NPA7I", 0, OK, nvidia_mcp_gpio4_raise}, + {0x10DE, 0x005E, 0x1695, 0x1010, 0x10DE, 0x0050, 0x1695, 0x1010, "8NPA7I", NULL, NULL, P3, "EPoX", "EP-8NPA7I", 0, NT, nvidia_mcp_gpio4_raise}, /* needs http://patchwork.coreboot.org/patch/2125/ */ {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, P3, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, {0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", P3, "EPoX", "EP-BX3", 0, NT, intel_piix4_gpo22_raise}, {0x10de, 0x02f0, 0x105b, 0x0d01, 0x10de, 0x0264, 0x105b, 0x0d01, NULL, NULL, NULL, P3, "Foxconn", "6150K8MD-8EKRSH", 0, NT, nvidia_mcp_gpio2_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Sun Jul 24 17:34:56 2011 (r1381) +++ trunk/print.c Sun Jul 24 18:30:31 2011 (r1382) @@ -480,6 +480,7 @@ B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), + B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a patch (http://patchwork.coreboot.org/patch/2125/) and a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), B("ASUS", "P5PE-VM", 1, "http://www.asus.com/product.aspx?P_ID=k3h0ZFVu9Lo1dUvk", NULL), @@ -509,7 +510,8 @@ B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), - B("EPoX", "EP-8NPA7I", 1, "http://epox.com/product.asp?ID=EP-8NPA7I", NULL), + B("EPoX", "EP-8NPA7I", 0, "http://www.epox.com/product.asp?ID=EP-8NPA7I", "Needs a patch (http://patchwork.coreboot.org/patch/2125/)."), + B("EPoX", "EP-9NPA7I", 0, "http://www.epox.com/product.asp?ID=EP-9NPA7I", "Needs a patch (http://patchwork.coreboot.org/patch/2125/) and the same board enable as the EP-8NPA7I."), B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), B("EVGA", "132-CK-NF78", 1, "http://http://www.evga.com/articles/385.asp", NULL),

1 0

Re: [flashrom] Don't Understand Output
by Stefan Tauner 24 Jul '11

24 Jul '11

On Sat, 23 Jul 2011 12:58:19 -0400 Bryan Moore <moore.bryan(a)gmail.com> wrote: > I'm just starting to consider flashing my EeePC 1005HA's BIOS on Ubuntu > Oneiric, so I installed flashrom and ran it, but can't make heads-or-tails > of the output; I also can't find any sensible information in the FAQ or > anywhere else on the web. Help? > > flashrom output: > > > Found chipset "Intel ICH7M", enabling flash write... OK. > > This chipset supports the following protocols: FWH. > > No EEPROM/flash device found. > > Note: flashrom can never write if the flash chip isn't found automatically. hello bryan! well the message "No EEPROM/flash device found." is the most important thing there. flashrom can not detect any flash chip (which holds the bios/firmware code). there can be multiple reasons for that, but all the details do not really matter. it boils down to the fact, that laptops are harder to support in flashrom than desktop boards. you can read about a few of the details here: http://flashrom.org/Laptops we recommend to not try to update the bios of laptops, but use the vendor tools instead. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] ichspi.c: do not print PBR[3] for ICH7 because it does not exist
by Carl-Daniel Hailfinger 24 Jul '11

24 Jul '11

Am 24.07.2011 00:49 schrieb Stefan Tauner: > intel document 307013 (ICH7 datasheet) section 21.1.9 does only define > PBR[0] (at SPIBAR + 60h) to PBR[2] (SPIBAR + 68h). SPIBAR + 6Ch and following > are not defined, but we were printing them as PBR[3] anyway. i could not find > any references to PBR[3] in documentation of other related chips (NM10, > atom e6xx) either, hence kill it. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > Good spotting. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1381 - trunk
by repository service 24 Jul '11

24 Jul '11

Author: stefanct Date: Sun Jul 24 17:34:56 2011 New Revision: 1381 URL: http://flashrom.org/trac/flashrom/changeset/1381 Log: ichspi.c: do not print PBR[3] for ICH7 because it does not exist intel document 307013 (ICH7 datasheet) section 21.1.9 does only define PBR[0] (at SPIBAR + 60h) to PBR[2] (SPIBAR + 68h). SPIBAR + 6Ch and following are not defined, but we were printing them as PBR[3] anyway. i could not find any references to PBR[3] in documentation of other related chips (NM10, atom e6xx) either, hence kill it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ichspi.c Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Jul 21 23:21:04 2011 (r1380) +++ trunk/ichspi.c Sun Jul 24 17:34:56 2011 (r1381) @@ -1263,7 +1263,7 @@ mmio_readl(ich_spibar + 0x58)); msg_pdbg("0x5c: 0x%08x (OPMENU+4)\n", mmio_readl(ich_spibar + 0x5c)); - for (i = 0; i < 4; i++) { + for (i = 0; i < 3; i++) { int offs; offs = 0x60 + (i * 4); msg_pdbg("0x%02x: 0x%08x (PBR%d)\n", offs,

1 0

flashrom -V
by Byron Johnson 24 Jul '11

24 Jul '11

1 0

[PATCH] ichspi.c: do not print PBR[3] for ICH7 because it does not exist
by Stefan Tauner 24 Jul '11

24 Jul '11

intel document 307013 (ICH7 datasheet) section 21.1.9 does only define PBR[0] (at SPIBAR + 60h) to PBR[2] (SPIBAR + 68h). SPIBAR + 6Ch and following are not defined, but we were printing them as PBR[3] anyway. i could not find any references to PBR[3] in documentation of other related chips (NM10, atom e6xx) either, hence kill it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- ichspi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/ichspi.c b/ichspi.c index 99c4613..0258626 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1263,7 +1263,7 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, mmio_readl(ich_spibar + 0x58)); msg_pdbg("0x5c: 0x%08x (OPMENU+4)\n", mmio_readl(ich_spibar + 0x5c)); - for (i = 0; i < 4; i++) { + for (i = 0; i < 3; i++) { int offs; offs = 0x60 + (i * 4); msg_pdbg("0x%02x: 0x%08x (PBR%d)\n", offs, -- 1.7.1

1 0

Don't Understand Output
by Bryan Moore 23 Jul '11

23 Jul '11

I'm just starting to consider flashing my EeePC 1005HA's BIOS on Ubuntu Oneiric, so I installed flashrom and ran it, but can't make heads-or-tails of the output; I also can't find any sensible information in the FAQ or anywhere else on the web. Help? flashrom output: > Found chipset "Intel ICH7M", enabling flash write... OK. > This chipset supports the following protocols: FWH. > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically.

1 0

AMD SB700/SB710/SB750/SB850 and Eon EN25F80
by Иван Кинаш 22 Jul '11

22 Jul '11

-- Best regards, Ivan Kinash

1 0

Re: [flashrom] [PATCH] chipset_enable.c: add a message in the case the chipset enable is untested
by Carl-Daniel Hailfinger 22 Jul '11

22 Jul '11

Am 21.07.2011 14:23 schrieb Stefan Tauner: > old output: > Found chipset "Intel QS57", enabling flash write... OK. > This chipset supports the following protocols: FWH, SPI. > > new non-verbose output for tested chipsets: > Found chipset "Intel QS57". Enabling flash write... OK. > This chipset supports the following protocols: FWH, SPI. > > new non-verbose output for untested chipsets: > Found chipset "Intel QS57". > This chipset is marked as untested. If you are using an up-to-date version > of flashrom please email a report to flashrom(a)flashrom.org including a > verbose (-V) log. Thank you! > Enabling flash write... OK. > This chipset supports the following protocols: FWH, SPI. > 4 additional lines... sorry, but that's simply too much. We have users of the DOS version of flashrom, and they have an 80x25 terminal, so wasting 4 lines (16% of the screen) is not acceptable. 2 more lines are already 8% of the screen. The following text would be shorter (2 additional lines), but I'd be happy to see a patch trimming it down even more to one additional line. Found chipset "Intel QS57" (untested). Enabling flash write... OK. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! This chipset supports the following protocols: FWH, SPI. Regards, Carl-Daniel -- http://www.hailfinger.org/

5 6

Re: [flashrom] FAILED update new bios but OK to flash OLD bios - P5N-E SLI
by Stefan Tauner 22 Jul '11

22 Jul '11

On Fri, 22 Jul 2011 10:38:45 +0200 Joël Obrecht <joel.obrecht(a)gmail.com> wrote: > Hi Joshua, > I'm sorry I looked a bit around but I guess I need some more explanations > for using / installing that patch. May I have to replace the data in source > files ? Where ? > Anyway, I tried again with last svn, failed again, I joined the verbose > output. > Joël > sorry, that was too fast. you need to apply the other patch too of course (which is even more important and should be tried without the one of my previous mail first). you can fetch and apply it similarly. the url is: http://patchwork.coreboot.org/patch/3282/raw/ -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] FAILED update new bios but OK to flash OLD bios - P5N-E SLI
by Joshua Roys 22 Jul '11

22 Jul '11

Hello Joël (and Segfault), Can you please try the attached patch? You'll also need to apply the one here: http://patchwork.coreboot.org/patch/2125/ Please reply with the output from `./flashrom -V' Thanks, Josh

2 1

[PATCH] Uniform chip names in flashchips.c
by Mattias Mattsson 22 Jul '11

22 Jul '11

Hi, This patch change the chipnames in flashchips.c to use bash style brace expansion syntax for chip IDs where they correspond to several chips with different names. This is a bit ugly, but at least it is simple and a bit more consistent to what we have now. Maybe someone else has a better solution? Thanks, -mattias Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> --- flashrom/flashchips.c 2011-07-22 01:21:47.000000000 +0200 +++ flashrom_uniform_chipnames/flashchips.c 2011-07-21 14:21:37.000000000 +0200 @@ -59,7 +59,7 @@ { .vendor = "AMD", - .name = "Am29F010A/B", + .name = "Am29F010{,A,B}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F010B, /* Same as Am29F010A */ @@ -86,7 +86,7 @@ { .vendor = "AMD", - .name = "Am29F002(N)BB", + .name = "Am29F002{,N}BB", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F002BB, @@ -118,7 +118,7 @@ { .vendor = "AMD", - .name = "Am29F002(N)BT", + .name = "Am29F002{,N}BT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F002BT, @@ -2242,7 +2242,7 @@ { .vendor = "Atmel", - .name = "AT49F002(N)", + .name = "AT49F002{,N}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F002N, @@ -2274,7 +2274,7 @@ { .vendor = "Atmel", - .name = "AT49F002(N)T", + .name = "AT49F002{,N}T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F002NT, @@ -3234,7 +3234,7 @@ { .vendor = "Eon", - .name = "EN29F002(A)(N)B", + .name = "EN29F002{,N,A,AN}B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29F002B, @@ -3266,7 +3266,7 @@ { .vendor = "Eon", - .name = "EN29F002(A)(N)T", + .name = "EN29F002{,N,A,AN}T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29F002T, @@ -3518,7 +3518,7 @@ { .vendor = "Intel", - .name = "28F001BN/BX-B", + .name = "28F001{BN,BX}-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F001B, @@ -3545,7 +3545,7 @@ { .vendor = "Intel", - .name = "28F001BN/BX-T", + .name = "28F001{BN,BX}-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F001T, @@ -3572,7 +3572,7 @@ { .vendor = "Intel", - .name = "28F002BC/BL/BV/BX-T", + .name = "28F002{BC,BL,BV,BX}-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F002T, @@ -3599,7 +3599,7 @@ { .vendor = "Intel", - .name = "28F008S3/S5/SC", + .name = "28F008{S3,S5,SC}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004S3, @@ -3622,7 +3622,7 @@ { .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-B", + .name = "28F004{B5,BE,BV,BX}-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004B, @@ -3649,7 +3649,7 @@ { .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-T", + .name = "28F004{B5,BE,BV,BX}-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004T, @@ -3676,7 +3676,7 @@ { .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-B", + .name = "28F400{BV,BX,CE,CV}-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F400B, @@ -3704,7 +3704,7 @@ { .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-T", + .name = "28F400{BV,BX,CE,CV}-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F400T, @@ -6006,7 +6006,7 @@ { .vendor = "SST", - .name = "SST49LF002A/B", + .name = "SST49LF002{A,B}", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF002A, @@ -6038,7 +6038,7 @@ { .vendor = "SST", - .name = "SST49LF003A/B", + .name = "SST49LF003{A,B}", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF003A, @@ -6073,7 +6073,7 @@ * and is only honored for 64k block erase, but not 4k sector erase. */ .vendor = "SST", - .name = "SST49LF004A/B", + .name = "SST49LF004{A,B}", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF004A, @@ -6869,7 +6869,7 @@ { .vendor = "ST", - .name = "M29F002T/NT", + .name = "M29F002{,N}T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F002T, @@ -8035,7 +8035,7 @@ { .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", + .name = "W29{C010,C010M,C011A,EE011,EE012}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C010, @@ -8058,7 +8058,7 @@ { .vendor = "Winbond", - .name = "W29C020(C)/W29C022", + .name = "W29C0{20,20C,22}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C020, @@ -8082,7 +8082,7 @@ { .vendor = "Winbond", - .name = "W29C040/P", + .name = "W29C040{,P}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C040, @@ -8106,7 +8106,7 @@ { .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", + .name = "W29{C010,C010M,C011A,EE011,EE012}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C010, @@ -8361,7 +8361,7 @@ { .vendor = "Winbond", - .name = "W49F002U/N", + .name = "W49F002U{,N}", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W49F002U,

2 1

Re: [flashrom] [PATCH] dummyflasher.c: add an "content" parameter to select initialization data
by Stefan Tauner 22 Jul '11

22 Jul '11

On Fri, 22 Jul 2011 00:08:41 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > previously the dummies were initialized to be empty (all ones), which makes > writes skip erasing altogether. with this patch the default is to fill it with random > bytes instead. > additionally one can decide other options with the "content" parameter: > content=ones - old behavior > content=random - new default > content=zeros - filled with 0x00 > content=increment - filled with i++ sorry, fixed commit log looks like: dummyflasher.c: add a "content" parameter to select initialization data previously the dummies were initialized to be empty (all ones), which makes write operations skip erasing altogether. with this patch the default is to fill it with random bytes instead. additionally one can decide other options with the "content" parameter: content=ones - old behavior content=random - new default content=zeros - filled with 0x00 content=increment - filled with i++ i am tired. gn8 -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom