- flashrom - mail.coreboot.org

Re: [flashrom] flashrom works with H67 Chip
by Stefan Tauner 29 Aug '11

29 Aug '11

On Sat, 27 Aug 2011 23:39:18 -0500 Dr Lawrence M Fox <drfox(a)chicagovet.net> wrote: > carlina@FOXBOX:~/Downloads/DOS$ sudo flashrom -w SH67H000.114 > flashrom v0.9.4-r1395 on Linux 2.6.38-11-generic (x86_64), built with libpci > 3.1.7, GCC 4.5.2, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found chipset "Intel H67". > This chipset is marked as untested. If you are using an up-to-date version > of flashrom please email a report to flashrom(a)flashrom.org including a > verbose (-V) log. Thank you! > Enabling flash write... OK. > This chipset supports the following protocols: FWH, SPI. > Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address > 0xffc00000. > Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. > Reading old flash chip contents... done. > Erasing and writing flash chip... Erase/write done. > Verifying flash... VERIFIED. Hello, Thanks for your report! I have marked the chipset as tested and will commit that later. > carlina@FOXBOX:~/Downloads/DOS$ sudo flashrom -V -w SH67H000.114 > flashrom v0.9.4-r1395 on Linux 2.6.38-11-generic (x86_64), built with libpci > 3.1.7, GCC 4.5.2, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 3360M loops per > second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 991 us, 10000 myus = > 9922 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "Shuttle" > DMI string system-product-name: "SH67H3" > DMI string system-version: "1.0" > DMI string baseboard-manufacturer: "Shuttle" > DMI string baseboard-product-name: "FH67" > DMI string baseboard-version: "1.0" > DMI string chassis-type: "Desktop" I have also added your mainboard (FH67) used in your barebone to our list of supported boards, thank you. > Found ITE Super I/O, ID 0x8772 on port 0x2e > Found chipset "Intel H67" with PCI ID 8086:1c4a. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom please email a report to flashrom(a)flashrom.org including a > verbose (-V) log. Thank you! > Enabling flash write... > […] > Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 > 0x4016 > Chip status register is 00 > Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address > 0xffc00000. > […] > Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, > id2 0x15 > Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. > Reading old flash chip contents... done. > Erasing and writing flash chip... Trying erase function 0... > 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, > […] > 0x3ff000-0x3fffff:S all those :S tokens indicate that the erase+write cycle for this block was skipped, because the content of the flash chip was equal to the file. this is of course expected because you have written the same file just before. i just mention it because this makes this log less informative. writing it in verbose mode the first time, would have been better for us. not a big deal though at all. > Erase/write done. > Verifying flash... VERIFIED. > Restoring MMIO space at 0x7f3670ff48a0 > Restoring MMIO space at 0x7f3670ff489c > Restoring MMIO space at 0x7f3670ff4898 > Restoring MMIO space at 0x7f3670ff4896 > Restoring MMIO space at 0x7f3670ff4894 > Restoring PCI config space for 00:1f:0 reg 0xdc -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Testing nicintel with SB82558B
by Andrew Morgan 28 Aug '11

28 Aug '11

Probe and read work. Erase fails and write requires erase to test. The problems could be to do with the (soldered) flash chip requiring VPP to write. I haven't tested the hardware any further yet, but I thought you might like this log to show that it does work this much. :) I have two of these cards, this one has a soldered flash chip, the other has a socket. I haven't tested the socketed one yet... -- Andrew.

2 1

flashrom works with H67 Chip
by Dr Lawrence M Fox 28 Aug '11

28 Aug '11

carlina@FOXBOX:~/Downloads/DOS$ sudo flashrom -w SH67H000.114 flashrom v0.9.4-r1395 on Linux 2.6.38-11-generic (x86_64), built with libpci 3.1.7, GCC 4.5.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel H67". This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... OK. This chipset supports the following protocols: FWH, SPI. Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. carlina@FOXBOX:~/Downloads/DOS$ sudo flashrom -V -w SH67H000.114 flashrom v0.9.4-r1395 on Linux 2.6.38-11-generic (x86_64), built with libpci 3.1.7, GCC 4.5.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3360M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 991 us, 10000 myus = 9922 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Shuttle" DMI string system-product-name: "SH67H3" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "Shuttle" DMI string baseboard-product-name: "FH67" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8772 on port 0x2e Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc00: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x003fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0001 (FREG2: Management Engine) 0x00001000-0x001fffff is read-write 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf87f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Super I/O ID 0x8772 is not on the list of flash capable controllers. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x24, id2 0x22, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x24, id2 0x22, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x24, id2 0x22, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x24, id2 0x22, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x61, id2 0x12, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:S, 0x201000-0x201fff:S, 0x202000-0x202fff:S, 0x203000-0x203fff:S, 0x204000-0x204fff:S, 0x205000-0x205fff:S, 0x206000-0x206fff:S, 0x207000-0x207fff:S, 0x208000-0x208fff:S, 0x209000-0x209fff:S, 0x20a000-0x20afff:S, 0x20b000-0x20bfff:S, 0x20c000-0x20cfff:S, 0x20d000-0x20dfff:S, 0x20e000-0x20efff:S, 0x20f000-0x20ffff:S, 0x210000-0x210fff:S, 0x211000-0x211fff:S, 0x212000-0x212fff:S, 0x213000-0x213fff:S, 0x214000-0x214fff:S, 0x215000-0x215fff:S, 0x216000-0x216fff:S, 0x217000-0x217fff:S, 0x218000-0x218fff:S, 0x219000-0x219fff:S, 0x21a000-0x21afff:S, 0x21b000-0x21bfff:S, 0x21c000-0x21cfff:S, 0x21d000-0x21dfff:S, 0x21e000-0x21efff:S, 0x21f000-0x21ffff:S, 0x220000-0x220fff:S, 0x221000-0x221fff:S, 0x222000-0x222fff:S, 0x223000-0x223fff:S, 0x224000-0x224fff:S, 0x225000-0x225fff:S, 0x226000-0x226fff:S, 0x227000-0x227fff:S, 0x228000-0x228fff:S, 0x229000-0x229fff:S, 0x22a000-0x22afff:S, 0x22b000-0x22bfff:S, 0x22c000-0x22cfff:S, 0x22d000-0x22dfff:S, 0x22e000-0x22efff:S, 0x22f000-0x22ffff:S, 0x230000-0x230fff:S, 0x231000-0x231fff:S, 0x232000-0x232fff:S, 0x233000-0x233fff:S, 0x234000-0x234fff:S, 0x235000-0x235fff:S, 0x236000-0x236fff:S, 0x237000-0x237fff:S, 0x238000-0x238fff:S, 0x239000-0x239fff:S, 0x23a000-0x23afff:S, 0x23b000-0x23bfff:S, 0x23c000-0x23cfff:S, 0x23d000-0x23dfff:S, 0x23e000-0x23efff:S, 0x23f000-0x23ffff:S, 0x240000-0x240fff:S, 0x241000-0x241fff:S, 0x242000-0x242fff:S, 0x243000-0x243fff:S, 0x244000-0x244fff:S, 0x245000-0x245fff:S, 0x246000-0x246fff:S, 0x247000-0x247fff:S, 0x248000-0x248fff:S, 0x249000-0x249fff:S, 0x24a000-0x24afff:S, 0x24b000-0x24bfff:S, 0x24c000-0x24cfff:S, 0x24d000-0x24dfff:S, 0x24e000-0x24efff:S, 0x24f000-0x24ffff:S, 0x250000-0x250fff:S, 0x251000-0x251fff:S, 0x252000-0x252fff:S, 0x253000-0x253fff:S, 0x254000-0x254fff:S, 0x255000-0x255fff:S, 0x256000-0x256fff:S, 0x257000-0x257fff:S, 0x258000-0x258fff:S, 0x259000-0x259fff:S, 0x25a000-0x25afff:S, 0x25b000-0x25bfff:S, 0x25c000-0x25cfff:S, 0x25d000-0x25dfff:S, 0x25e000-0x25efff:S, 0x25f000-0x25ffff:S, 0x260000-0x260fff:S, 0x261000-0x261fff:S, 0x262000-0x262fff:S, 0x263000-0x263fff:S, 0x264000-0x264fff:S, 0x265000-0x265fff:S, 0x266000-0x266fff:S, 0x267000-0x267fff:S, 0x268000-0x268fff:S, 0x269000-0x269fff:S, 0x26a000-0x26afff:S, 0x26b000-0x26bfff:S, 0x26c000-0x26cfff:S, 0x26d000-0x26dfff:S, 0x26e000-0x26efff:S, 0x26f000-0x26ffff:S, 0x270000-0x270fff:S, 0x271000-0x271fff:S, 0x272000-0x272fff:S, 0x273000-0x273fff:S, 0x274000-0x274fff:S, 0x275000-0x275fff:S, 0x276000-0x276fff:S, 0x277000-0x277fff:S, 0x278000-0x278fff:S, 0x279000-0x279fff:S, 0x27a000-0x27afff:S, 0x27b000-0x27bfff:S, 0x27c000-0x27cfff:S, 0x27d000-0x27dfff:S, 0x27e000-0x27efff:S, 0x27f000-0x27ffff:S, 0x280000-0x280fff:S, 0x281000-0x281fff:S, 0x282000-0x282fff:S, 0x283000-0x283fff:S, 0x284000-0x284fff:S, 0x285000-0x285fff:S, 0x286000-0x286fff:S, 0x287000-0x287fff:S, 0x288000-0x288fff:S, 0x289000-0x289fff:S, 0x28a000-0x28afff:S, 0x28b000-0x28bfff:S, 0x28c000-0x28cfff:S, 0x28d000-0x28dfff:S, 0x28e000-0x28efff:S, 0x28f000-0x28ffff:S, 0x290000-0x290fff:S, 0x291000-0x291fff:S, 0x292000-0x292fff:S, 0x293000-0x293fff:S, 0x294000-0x294fff:S, 0x295000-0x295fff:S, 0x296000-0x296fff:S, 0x297000-0x297fff:S, 0x298000-0x298fff:S, 0x299000-0x299fff:S, 0x29a000-0x29afff:S, 0x29b000-0x29bfff:S, 0x29c000-0x29cfff:S, 0x29d000-0x29dfff:S, 0x29e000-0x29efff:S, 0x29f000-0x29ffff:S, 0x2a0000-0x2a0fff:S, 0x2a1000-0x2a1fff:S, 0x2a2000-0x2a2fff:S, 0x2a3000-0x2a3fff:S, 0x2a4000-0x2a4fff:S, 0x2a5000-0x2a5fff:S, 0x2a6000-0x2a6fff:S, 0x2a7000-0x2a7fff:S, 0x2a8000-0x2a8fff:S, 0x2a9000-0x2a9fff:S, 0x2aa000-0x2aafff:S, 0x2ab000-0x2abfff:S, 0x2ac000-0x2acfff:S, 0x2ad000-0x2adfff:S, 0x2ae000-0x2aefff:S, 0x2af000-0x2affff:S, 0x2b0000-0x2b0fff:S, 0x2b1000-0x2b1fff:S, 0x2b2000-0x2b2fff:S, 0x2b3000-0x2b3fff:S, 0x2b4000-0x2b4fff:S, 0x2b5000-0x2b5fff:S, 0x2b6000-0x2b6fff:S, 0x2b7000-0x2b7fff:S, 0x2b8000-0x2b8fff:S, 0x2b9000-0x2b9fff:S, 0x2ba000-0x2bafff:S, 0x2bb000-0x2bbfff:S, 0x2bc000-0x2bcfff:S, 0x2bd000-0x2bdfff:S, 0x2be000-0x2befff:S, 0x2bf000-0x2bffff:S, 0x2c0000-0x2c0fff:S, 0x2c1000-0x2c1fff:S, 0x2c2000-0x2c2fff:S, 0x2c3000-0x2c3fff:S, 0x2c4000-0x2c4fff:S, 0x2c5000-0x2c5fff:S, 0x2c6000-0x2c6fff:S, 0x2c7000-0x2c7fff:S, 0x2c8000-0x2c8fff:S, 0x2c9000-0x2c9fff:S, 0x2ca000-0x2cafff:S, 0x2cb000-0x2cbfff:S, 0x2cc000-0x2ccfff:S, 0x2cd000-0x2cdfff:S, 0x2ce000-0x2cefff:S, 0x2cf000-0x2cffff:S, 0x2d0000-0x2d0fff:S, 0x2d1000-0x2d1fff:S, 0x2d2000-0x2d2fff:S, 0x2d3000-0x2d3fff:S, 0x2d4000-0x2d4fff:S, 0x2d5000-0x2d5fff:S, 0x2d6000-0x2d6fff:S, 0x2d7000-0x2d7fff:S, 0x2d8000-0x2d8fff:S, 0x2d9000-0x2d9fff:S, 0x2da000-0x2dafff:S, 0x2db000-0x2dbfff:S, 0x2dc000-0x2dcfff:S, 0x2dd000-0x2ddfff:S, 0x2de000-0x2defff:S, 0x2df000-0x2dffff:S, 0x2e0000-0x2e0fff:S, 0x2e1000-0x2e1fff:S, 0x2e2000-0x2e2fff:S, 0x2e3000-0x2e3fff:S, 0x2e4000-0x2e4fff:S, 0x2e5000-0x2e5fff:S, 0x2e6000-0x2e6fff:S, 0x2e7000-0x2e7fff:S, 0x2e8000-0x2e8fff:S, 0x2e9000-0x2e9fff:S, 0x2ea000-0x2eafff:S, 0x2eb000-0x2ebfff:S, 0x2ec000-0x2ecfff:S, 0x2ed000-0x2edfff:S, 0x2ee000-0x2eefff:S, 0x2ef000-0x2effff:S, 0x2f0000-0x2f0fff:S, 0x2f1000-0x2f1fff:S, 0x2f2000-0x2f2fff:S, 0x2f3000-0x2f3fff:S, 0x2f4000-0x2f4fff:S, 0x2f5000-0x2f5fff:S, 0x2f6000-0x2f6fff:S, 0x2f7000-0x2f7fff:S, 0x2f8000-0x2f8fff:S, 0x2f9000-0x2f9fff:S, 0x2fa000-0x2fafff:S, 0x2fb000-0x2fbfff:S, 0x2fc000-0x2fcfff:S, 0x2fd000-0x2fdfff:S, 0x2fe000-0x2fefff:S, 0x2ff000-0x2fffff:S, 0x300000-0x300fff:S, 0x301000-0x301fff:S, 0x302000-0x302fff:S, 0x303000-0x303fff:S, 0x304000-0x304fff:S, 0x305000-0x305fff:S, 0x306000-0x306fff:S, 0x307000-0x307fff:S, 0x308000-0x308fff:S, 0x309000-0x309fff:S, 0x30a000-0x30afff:S, 0x30b000-0x30bfff:S, 0x30c000-0x30cfff:S, 0x30d000-0x30dfff:S, 0x30e000-0x30efff:S, 0x30f000-0x30ffff:S, 0x310000-0x310fff:S, 0x311000-0x311fff:S, 0x312000-0x312fff:S, 0x313000-0x313fff:S, 0x314000-0x314fff:S, 0x315000-0x315fff:S, 0x316000-0x316fff:S, 0x317000-0x317fff:S, 0x318000-0x318fff:S, 0x319000-0x319fff:S, 0x31a000-0x31afff:S, 0x31b000-0x31bfff:S, 0x31c000-0x31cfff:S, 0x31d000-0x31dfff:S, 0x31e000-0x31efff:S, 0x31f000-0x31ffff:S, 0x320000-0x320fff:S, 0x321000-0x321fff:S, 0x322000-0x322fff:S, 0x323000-0x323fff:S, 0x324000-0x324fff:S, 0x325000-0x325fff:S, 0x326000-0x326fff:S, 0x327000-0x327fff:S, 0x328000-0x328fff:S, 0x329000-0x329fff:S, 0x32a000-0x32afff:S, 0x32b000-0x32bfff:S, 0x32c000-0x32cfff:S, 0x32d000-0x32dfff:S, 0x32e000-0x32efff:S, 0x32f000-0x32ffff:S, 0x330000-0x330fff:S, 0x331000-0x331fff:S, 0x332000-0x332fff:S, 0x333000-0x333fff:S, 0x334000-0x334fff:S, 0x335000-0x335fff:S, 0x336000-0x336fff:S, 0x337000-0x337fff:S, 0x338000-0x338fff:S, 0x339000-0x339fff:S, 0x33a000-0x33afff:S, 0x33b000-0x33bfff:S, 0x33c000-0x33cfff:S, 0x33d000-0x33dfff:S, 0x33e000-0x33efff:S, 0x33f000-0x33ffff:S, 0x340000-0x340fff:S, 0x341000-0x341fff:S, 0x342000-0x342fff:S, 0x343000-0x343fff:S, 0x344000-0x344fff:S, 0x345000-0x345fff:S, 0x346000-0x346fff:S, 0x347000-0x347fff:S, 0x348000-0x348fff:S, 0x349000-0x349fff:S, 0x34a000-0x34afff:S, 0x34b000-0x34bfff:S, 0x34c000-0x34cfff:S, 0x34d000-0x34dfff:S, 0x34e000-0x34efff:S, 0x34f000-0x34ffff:S, 0x350000-0x350fff:S, 0x351000-0x351fff:S, 0x352000-0x352fff:S, 0x353000-0x353fff:S, 0x354000-0x354fff:S, 0x355000-0x355fff:S, 0x356000-0x356fff:S, 0x357000-0x357fff:S, 0x358000-0x358fff:S, 0x359000-0x359fff:S, 0x35a000-0x35afff:S, 0x35b000-0x35bfff:S, 0x35c000-0x35cfff:S, 0x35d000-0x35dfff:S, 0x35e000-0x35efff:S, 0x35f000-0x35ffff:S, 0x360000-0x360fff:S, 0x361000-0x361fff:S, 0x362000-0x362fff:S, 0x363000-0x363fff:S, 0x364000-0x364fff:S, 0x365000-0x365fff:S, 0x366000-0x366fff:S, 0x367000-0x367fff:S, 0x368000-0x368fff:S, 0x369000-0x369fff:S, 0x36a000-0x36afff:S, 0x36b000-0x36bfff:S, 0x36c000-0x36cfff:S, 0x36d000-0x36dfff:S, 0x36e000-0x36efff:S, 0x36f000-0x36ffff:S, 0x370000-0x370fff:S, 0x371000-0x371fff:S, 0x372000-0x372fff:S, 0x373000-0x373fff:S, 0x374000-0x374fff:S, 0x375000-0x375fff:S, 0x376000-0x376fff:S, 0x377000-0x377fff:S, 0x378000-0x378fff:S, 0x379000-0x379fff:S, 0x37a000-0x37afff:S, 0x37b000-0x37bfff:S, 0x37c000-0x37cfff:S, 0x37d000-0x37dfff:S, 0x37e000-0x37efff:S, 0x37f000-0x37ffff:S, 0x380000-0x380fff:S, 0x381000-0x381fff:S, 0x382000-0x382fff:S, 0x383000-0x383fff:S, 0x384000-0x384fff:S, 0x385000-0x385fff:S, 0x386000-0x386fff:S, 0x387000-0x387fff:S, 0x388000-0x388fff:S, 0x389000-0x389fff:S, 0x38a000-0x38afff:S, 0x38b000-0x38bfff:S, 0x38c000-0x38cfff:S, 0x38d000-0x38dfff:S, 0x38e000-0x38efff:S, 0x38f000-0x38ffff:S, 0x390000-0x390fff:S, 0x391000-0x391fff:S, 0x392000-0x392fff:S, 0x393000-0x393fff:S, 0x394000-0x394fff:S, 0x395000-0x395fff:S, 0x396000-0x396fff:S, 0x397000-0x397fff:S, 0x398000-0x398fff:S, 0x399000-0x399fff:S, 0x39a000-0x39afff:S, 0x39b000-0x39bfff:S, 0x39c000-0x39cfff:S, 0x39d000-0x39dfff:S, 0x39e000-0x39efff:S, 0x39f000-0x39ffff:S, 0x3a0000-0x3a0fff:S, 0x3a1000-0x3a1fff:S, 0x3a2000-0x3a2fff:S, 0x3a3000-0x3a3fff:S, 0x3a4000-0x3a4fff:S, 0x3a5000-0x3a5fff:S, 0x3a6000-0x3a6fff:S, 0x3a7000-0x3a7fff:S, 0x3a8000-0x3a8fff:S, 0x3a9000-0x3a9fff:S, 0x3aa000-0x3aafff:S, 0x3ab000-0x3abfff:S, 0x3ac000-0x3acfff:S, 0x3ad000-0x3adfff:S, 0x3ae000-0x3aefff:S, 0x3af000-0x3affff:S, 0x3b0000-0x3b0fff:S, 0x3b1000-0x3b1fff:S, 0x3b2000-0x3b2fff:S, 0x3b3000-0x3b3fff:S, 0x3b4000-0x3b4fff:S, 0x3b5000-0x3b5fff:S, 0x3b6000-0x3b6fff:S, 0x3b7000-0x3b7fff:S, 0x3b8000-0x3b8fff:S, 0x3b9000-0x3b9fff:S, 0x3ba000-0x3bafff:S, 0x3bb000-0x3bbfff:S, 0x3bc000-0x3bcfff:S, 0x3bd000-0x3bdfff:S, 0x3be000-0x3befff:S, 0x3bf000-0x3bffff:S, 0x3c0000-0x3c0fff:S, 0x3c1000-0x3c1fff:S, 0x3c2000-0x3c2fff:S, 0x3c3000-0x3c3fff:S, 0x3c4000-0x3c4fff:S, 0x3c5000-0x3c5fff:S, 0x3c6000-0x3c6fff:S, 0x3c7000-0x3c7fff:S, 0x3c8000-0x3c8fff:S, 0x3c9000-0x3c9fff:S, 0x3ca000-0x3cafff:S, 0x3cb000-0x3cbfff:S, 0x3cc000-0x3ccfff:S, 0x3cd000-0x3cdfff:S, 0x3ce000-0x3cefff:S, 0x3cf000-0x3cffff:S, 0x3d0000-0x3d0fff:S, 0x3d1000-0x3d1fff:S, 0x3d2000-0x3d2fff:S, 0x3d3000-0x3d3fff:S, 0x3d4000-0x3d4fff:S, 0x3d5000-0x3d5fff:S, 0x3d6000-0x3d6fff:S, 0x3d7000-0x3d7fff:S, 0x3d8000-0x3d8fff:S, 0x3d9000-0x3d9fff:S, 0x3da000-0x3dafff:S, 0x3db000-0x3dbfff:S, 0x3dc000-0x3dcfff:S, 0x3dd000-0x3ddfff:S, 0x3de000-0x3defff:S, 0x3df000-0x3dffff:S, 0x3e0000-0x3e0fff:S, 0x3e1000-0x3e1fff:S, 0x3e2000-0x3e2fff:S, 0x3e3000-0x3e3fff:S, 0x3e4000-0x3e4fff:S, 0x3e5000-0x3e5fff:S, 0x3e6000-0x3e6fff:S, 0x3e7000-0x3e7fff:S, 0x3e8000-0x3e8fff:S, 0x3e9000-0x3e9fff:S, 0x3ea000-0x3eafff:S, 0x3eb000-0x3ebfff:S, 0x3ec000-0x3ecfff:S, 0x3ed000-0x3edfff:S, 0x3ee000-0x3eefff:S, 0x3ef000-0x3effff:S, 0x3f0000-0x3f0fff:S, 0x3f1000-0x3f1fff:S, 0x3f2000-0x3f2fff:S, 0x3f3000-0x3f3fff:S, 0x3f4000-0x3f4fff:S, 0x3f5000-0x3f5fff:S, 0x3f6000-0x3f6fff:S, 0x3f7000-0x3f7fff:S, 0x3f8000-0x3f8fff:S, 0x3f9000-0x3f9fff:S, 0x3fa000-0x3fafff:S, 0x3fb000-0x3fbfff:S, 0x3fc000-0x3fcfff:S, 0x3fd000-0x3fdfff:S, 0x3fe000-0x3fefff:S, 0x3ff000-0x3fffff:S Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0x7f3670ff48a0 Restoring MMIO space at 0x7f3670ff489c Restoring MMIO space at 0x7f3670ff4898 Restoring MMIO space at 0x7f3670ff4896 Restoring MMIO space at 0x7f3670ff4894 Restoring PCI config space for 00:1f:0 reg 0xdc carlina@FOXBOX:~/Downloads/DOS$ ^C -- *Lawrence M Fox, DVM DABVP* *Certified in Canine & Feline Practice* River Grove (Chicago), IL USA

1 0

Re: [flashrom] [PATCH] Fix printing of the Boot BIOS Straps on Intel chipsets
by Uwe Hermann 27 Aug '11

27 Aug '11

On Wed, Aug 17, 2011 at 06:17:45AM +0200, Stefan Tauner wrote: > defining all those arrays is not very elegant, but i think it is at least very > readable this way. Yep, pretty good solution IMHO, I would have done the same. > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> I cross-checked the datasheets and didn't spot any errors (ICH7-10, NM10, EP*, 5/6 series). ICH6 and lower, ESB*, and 3100 series and probably others don't have GCS, thus no need to list/mention them here (which you didn't). > + case 7: > + /* EP80579 may need further changes, but this is the least > + * intrusive way to get correct BOOT Strap printing without > + * changing the rest of its code path) */ ^ Missing full stop here. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

[commit] r1423 - trunk
by repository service 27 Aug '11

27 Aug '11

Author: stefanct Date: Sat Aug 27 23:19:56 2011 New Revision: 1423 URL: http://flashrom.org/trac/flashrom/changeset/1423 Log: Fix printing of the Boot BIOS Straps on Intel chipsets The meaning of the bits involved has changed several times in the past. This patch takes these changes into account and hence fixes the output of the pretty printing of GCS on all SPI-supported Intel chipsets that are not ICH7 or NM10 (the latter were unaffected, because the defaults were correct). This patch also allows to differentiate Ibex Peak and Cougar Point chipsets from the earlier chipset series (ICH10) by adding new wrapper functions that set "ich_generation" to 11 and 12 respectively. This should not change behavior outside of enable_flash_ich_dc_spi, because the code path for ich_generation >=9 is equal. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> --- defining all those arrays is not very elegant, but i think it is at least very readable this way. improvements are welcome! reviewers should have an eye on the codepaths for ich_generation >= 9. i did not spot a problem, but it should be checked again. alternatively we could just remove the pretty printing of GCS and just output the bits involved. i would like to keep the pch differentiation anyway though, because i feel it will become handy in the future. tested on my QS57-based thinkpad (probe + partial read) Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Fri Aug 26 23:11:41 2011 (r1422) +++ trunk/chipset_enable.c Sat Aug 27 23:19:56 2011 (r1423) @@ -440,11 +440,6 @@ return 0; } -#define ICH_STRAP_RSVD 0x00 -#define ICH_STRAP_SPI 0x01 -#define ICH_STRAP_PCI 0x02 -#define ICH_STRAP_LPC 0x03 - static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name) { /* Do we really need no write enable? */ @@ -458,13 +453,39 @@ uint8_t bbs, buc; uint32_t tmp, gcs; void *rcrb; + const char *const *straps_names; - /* - * TODO: These names are incorrect for EP80579. For that, the solution - * would look like the commented line below. - */ - // static const char *straps_names[] = {"SPI", "reserved", "reserved", "LPC" }; - static const char *straps_names[] = { "reserved", "SPI", "PCI", "LPC" }; + static const char *const straps_names_EP80579[] = { "SPI", "reserved", "reserved", "LPC" }; + static const char *const straps_names_ich7_nm10[] = { "reserved", "SPI", "PCI", "LPC" }; + static const char *const straps_names_ich8910[] = { "SPI", "SPI", "PCI", "LPC" }; + static const char *const straps_names_pch56[] = { "LPC", "reserved", "PCI", "SPI" }; + static const char *const straps_names_unknown[] = { "unknown", "unknown", "unknown", "unknown" }; + + switch (ich_generation) { + case 7: + /* EP80579 may need further changes, but this is the least + * intrusive way to get correct BOOT Strap printing without + * changing the rest of its code path). */ + if (strcmp(name, "EP80579") == 0) + straps_names = straps_names_EP80579; + else + straps_names = straps_names_ich7_nm10; + break; + case 8: + case 9: + case 10: + straps_names = straps_names_ich8910; + break; + case 11: + case 12: + straps_names = straps_names_pch56; + break; + default: + msg_gerr("%s: unknown ICH generation. Please report!\n", + __func__); + straps_names = straps_names_unknown; + break; + } /* Enable Flash Writes */ ret = enable_flash_ich_dc(dev, name); @@ -481,7 +502,7 @@ msg_pdbg("BIOS Interface Lock-Down: %sabled, ", (gcs & 0x1) ? "en" : "dis"); bbs = (gcs >> 10) & 0x3; - msg_pdbg("BOOT BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]); + msg_pdbg("Boot BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]); buc = mmio_readb(rcrb + 0x3414); msg_pdbg("Top Swap : %s\n", @@ -491,11 +512,11 @@ * time. At least not with our current code. So we prevent searching * on ICH7 when the southbridge is strapped to LPC */ - buses_supported = BUS_FWH; if (ich_generation == 7) { - if (bbs == ICH_STRAP_LPC) { - /* No further SPI initialization required */ + if (bbs == 0x03) { + /* If strapped to LPC, no further SPI initialization is + * required. */ return ret; } else { /* Disable LPC/FWH if strapped to PCI or SPI */ @@ -532,6 +553,18 @@ return enable_flash_ich_dc_spi(dev, name, 10); } +/* Ibex Peak aka. 5 series & 3400 series */ +static int enable_flash_pch5(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_dc_spi(dev, name, 11); +} + +/* Cougar Point aka. 6 series & c200 series */ +static int enable_flash_pch6(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_dc_spi(dev, name, 12); +} + static int via_no_byte_merge(struct pci_dev *dev, const char *name) { uint8_t val; @@ -1159,21 +1192,21 @@ {0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000}, {0x8086, 0x122e, OK, "Intel", "PIIX", enable_flash_piix4}, {0x8086, 0x1234, NT, "Intel", "MPIIX", enable_flash_piix4}, - {0x8086, 0x1c44, NT, "Intel", "Z68", enable_flash_ich10}, - {0x8086, 0x1c46, NT, "Intel", "P67", enable_flash_ich10}, - {0x8086, 0x1c47, NT, "Intel", "UM67", enable_flash_ich10}, - {0x8086, 0x1c49, NT, "Intel", "HM65", enable_flash_ich10}, - {0x8086, 0x1c4a, NT, "Intel", "H67", enable_flash_ich10}, - {0x8086, 0x1c4b, NT, "Intel", "HM67", enable_flash_ich10}, - {0x8086, 0x1c4c, NT, "Intel", "Q65", enable_flash_ich10}, - {0x8086, 0x1c4d, NT, "Intel", "QS67", enable_flash_ich10}, - {0x8086, 0x1c4e, NT, "Intel", "Q67", enable_flash_ich10}, - {0x8086, 0x1c4f, NT, "Intel", "QM67", enable_flash_ich10}, - {0x8086, 0x1c50, NT, "Intel", "B65", enable_flash_ich10}, - {0x8086, 0x1c52, NT, "Intel", "C202", enable_flash_ich10}, - {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_ich10}, - {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_ich10}, - {0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_ich10}, + {0x8086, 0x1c44, NT, "Intel", "Z68", enable_flash_pch6}, + {0x8086, 0x1c46, NT, "Intel", "P67", enable_flash_pch6}, + {0x8086, 0x1c47, NT, "Intel", "UM67", enable_flash_pch6}, + {0x8086, 0x1c49, NT, "Intel", "HM65", enable_flash_pch6}, + {0x8086, 0x1c4a, NT, "Intel", "H67", enable_flash_pch6}, + {0x8086, 0x1c4b, NT, "Intel", "HM67", enable_flash_pch6}, + {0x8086, 0x1c4c, NT, "Intel", "Q65", enable_flash_pch6}, + {0x8086, 0x1c4d, NT, "Intel", "QS67", enable_flash_pch6}, + {0x8086, 0x1c4e, NT, "Intel", "Q67", enable_flash_pch6}, + {0x8086, 0x1c4f, NT, "Intel", "QM67", enable_flash_pch6}, + {0x8086, 0x1c50, NT, "Intel", "B65", enable_flash_pch6}, + {0x8086, 0x1c52, NT, "Intel", "C202", enable_flash_pch6}, + {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6}, + {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6}, + {0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_pch6}, {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e}, @@ -1212,23 +1245,23 @@ {0x8086, 0x3a18, OK, "Intel", "ICH10", enable_flash_ich10}, {0x8086, 0x3a1a, OK, "Intel", "ICH10D", enable_flash_ich10}, {0x8086, 0x3a1e, NT, "Intel", "ICH10 Engineering Sample", enable_flash_ich10}, - {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_ich10}, - {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_ich10}, - {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_ich10}, - {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_ich10}, - {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_ich10}, - {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_ich10}, - {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_ich10}, - {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_ich10}, - {0x8086, 0x3b0a, NT, "Intel", "Q57", enable_flash_ich10}, - {0x8086, 0x3b0b, NT, "Intel", "HM57", enable_flash_ich10}, - {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", enable_flash_ich10}, - {0x8086, 0x3b0e, NT, "Intel", "B55", enable_flash_ich10}, - {0x8086, 0x3b0f, OK, "Intel", "QS57", enable_flash_ich10}, - {0x8086, 0x3b12, NT, "Intel", "3400", enable_flash_ich10}, - {0x8086, 0x3b14, NT, "Intel", "3420", enable_flash_ich10}, - {0x8086, 0x3b16, NT, "Intel", "3450", enable_flash_ich10}, - {0x8086, 0x3b1e, NT, "Intel", "B55", enable_flash_ich10}, + {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_pch5}, + {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_pch5}, + {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_pch5}, + {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_pch5}, + {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_pch5}, + {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_pch5}, + {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_pch5}, + {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_pch5}, + {0x8086, 0x3b0a, NT, "Intel", "Q57", enable_flash_pch5}, + {0x8086, 0x3b0b, NT, "Intel", "HM57", enable_flash_pch5}, + {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", enable_flash_pch5}, + {0x8086, 0x3b0e, NT, "Intel", "B55", enable_flash_pch5}, + {0x8086, 0x3b0f, OK, "Intel", "QS57", enable_flash_pch5}, + {0x8086, 0x3b12, NT, "Intel", "3400", enable_flash_pch5}, + {0x8086, 0x3b14, NT, "Intel", "3420", enable_flash_pch5}, + {0x8086, 0x3b16, NT, "Intel", "3450", enable_flash_pch5}, + {0x8086, 0x3b1e, NT, "Intel", "B55", enable_flash_pch5}, {0x8086, 0x5031, OK, "Intel", "EP80579", enable_flash_ich7}, {0x8086, 0x7000, OK, "Intel", "PIIX3", enable_flash_piix4}, {0x8086, 0x7110, OK, "Intel", "PIIX4/4E/4M", enable_flash_piix4},

1 0

use flashrom for Foxconn H67MP-V
by A.P. 27 Aug '11

27 Aug '11

Good day, I want to use flashrom to flash bios on H67MP-V motherboard. Is it safe for me? $flashrom -p internal:laptop=force_I_want_a_brick -V : flashrom v0.9.4-r1395 on Linux 2.6.35-30-generic-pae (i686), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2975M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 994 us, 10000 myus = 9947 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To be filled by O.E.M." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Foxconn " DMI string baseboard-product-name: "H67MP-S/-V/H67MP " DMI string baseboard-version: " " DMI string chassis-type: "" DMI chassis-type is not specific enough. Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc00: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6009 (HSFS) HSFS: FDONE=1, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0001 (FREG2: Management Engine) 0x00001000-0x001fffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Super I/O ID 0x8728 is not on the list of flash capable controllers. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xaa, id2 0x89, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 No operations were specified. Restoring MMIO space at 0xb78568a0 Restoring MMIO space at 0xb785689c Restoring MMIO space at 0xb7856898 Restoring MMIO space at 0xb7856896 Restoring MMIO space at 0xb7856894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Re: [flashrom] [PATCH]add AMD hudson support
by Uwe Hermann 26 Aug '11

26 Aug '11

On Fri, Aug 26, 2011 at 09:56:42AM +0800, QingPei Wang wrote: > you are right, it's 0x1022. new patch attached~~~ Thanks, committed as r1422. Please let us know if the patch is tested on hardware or not though, and preferrably also post the output of "./flashrom -V", thanks! Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

1 0

[commit] r1422 - trunk
by repository service 26 Aug '11

26 Aug '11

Author: uwe Date: Fri Aug 26 23:11:41 2011 New Revision: 1422 URL: http://flashrom.org/trac/flashrom/changeset/1422 Log: Add AMD Hudson chipset-enable. AMD Hudson has different vendor/device IDs than AMD SBx00, handle that properly. Signed-off-by: Wang Qing Pei <wangqingpei(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/chipset_enable.c trunk/sb600spi.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Fri Aug 26 00:54:23 2011 (r1421) +++ trunk/chipset_enable.c Fri Aug 26 23:11:41 2011 (r1422) @@ -1058,6 +1058,7 @@ {0x1022, 0x3000, OK, "AMD", "Elan SC520", get_flashbase_sc520}, {0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd8111}, {0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111}, + {0x1022, 0x780e, OK, "AMD", "Hudson", enable_flash_sb600}, {0x1039, 0x0406, NT, "SiS", "501/5101/5501", enable_flash_sis501}, {0x1039, 0x0496, NT, "SiS", "85C496+497", enable_flash_sis85c496}, {0x1039, 0x0530, NT, "SiS", "530", enable_flash_sis530}, Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Fri Aug 26 00:54:23 2011 (r1421) +++ trunk/sb600spi.c Fri Aug 26 23:11:41 2011 (r1422) @@ -259,8 +259,11 @@ smbus_dev = pci_dev_find(0x1002, 0x4385); if (!smbus_dev) { - msg_perr("ERROR: SMBus device not found. Not enabling SPI.\n"); - return ERROR_NONFATAL; + smbus_dev = pci_dev_find(0x1022, 0x780b); /* AMD Hudson */ + if (!smbus_dev) { + msg_perr("ERROR: SMBus device not found. Not enabling SPI.\n"); + return ERROR_NONFATAL; + } } /* Note about the bit tests below: If a bit is zero, the GPIO is SPI. */

1 0

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches
by Stefan Tauner 26 Aug '11

26 Aug '11

On Wed, 24 Aug 2011 17:00:43 +0200 "Frei, Thomas (GE Germany)" <Thomas.Frei(a)ge.com> wrote: > Hi, > > sorry, msg_gsbg2 is a typo - it is of course msg_gdbg2. > > I'm using the 0.9.4 from http://www.flashrom.org/Downloads. > > Isn't this the latest? > 0.9.4 is the latest *stable* release, but the patches floating around here usually are to be applied on the latest *development* source code. please check out the source code with subversion as described on the download page and retry. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [PATCH]add AMD hudson support
by Paul Menzel 26 Aug '11

26 Aug '11

Am Freitag, den 26.08.2011, 09:56 +0800 schrieb QingPei Wang: > you are right, it's 0x1022. new patch attached~~~ Thank you! Did you test it? Can you attach the output of `flashrom -V` as Uwe asked you to do? Thanks, Paul

1 0

Re: [flashrom] [PATCH]add AMD hudson support
by Uwe Hermann 26 Aug '11

26 Aug '11

Hi, On Thu, Aug 25, 2011 at 11:06:12PM +0800, QingPei Wang wrote: > The HUDSON has different vendor & device id than SBx00. The ids are got > by lspci. > Signed-off-by: Wang Qing Pei <wangqingpei(a)gmail.com> Thanks for the patch, we'll merge it soonish, but please see below for some questions. > Index: chipset_enable.c > =================================================================== > --- chipset_enable.c (revision 1419) > +++ chipset_enable.c (working copy) > @@ -1052,6 +1052,7 @@ > + {0x1002, 0x780e, OK, "AMD", "HUDSON", enable_flash_sb600}, Shouldn't this be 0x1022 (AMD instead of ATI ID) here? Also, did you test the chipset-enable on real hardware? Otherwise we should probably commit this as "NT" (not tested) instead of "OK". Please post a log of "./flashrom -V" with the patch applied if you own some test hardware, thanks! Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

Re: [flashrom] flashrom on PowerPC
by Carl-Daniel Hailfinger 26 Aug '11

26 Aug '11

Hi Mattias, nice to see you're back, and even more so with a big bang announcement. Am 27.07.2011 18:20 schrieb Mattias Mattsson: > I was able to run flashrom under Linux on PPC (big endian) hardware > with two small modifications in internal.c and processor_enable.c (see > attached patch). Not sure if this is the right way to do it but it > seems to work for me. > > Note that for Apple hardware you have to use a special power on method > to make the flash chip accessible (hold power button until beep). On > some models you have to press and hold an additional button on the > machine ("programmer's button") or keyboard ("Command"). > http://support.apple.com/kb/HT2322 > http://support.apple.com/kb/DL1284 > http://support.apple.com/kb/DL1126 > > I have tested this on two pieces of Apple hardware: "Mac Mini" (model > ID: PowerMac10,1) and "Mac mini (Late 2005)" (model ID: PowerMac10,2): > http://support.apple.com/kb/ht3476 > > By taking the hardware apart I can confirm they have the following flash chips: > > PowerMac10,1: AMD Am29LV008BB-90EC > PowerMac10,2: SHARP LH28F008BJT-BTLZ1 > > Flash chips seem to be mapped top-aligned in the 4GB address space. > Looking at the Open Firmware forth code inside Apple's own firmware > updates also suggests this is the case. > > I was able to probe, read, write and erase on both machines. Read > files seem to contain valid data. > > Added support for LH28F008BJT-BTLZ1 and marked Am29LV008B as fully tested. > > Logs and patches attached. > > > Please tell me if I should test something else! > Excellent work! The LH28F008BJT patch is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> The Am29LV008BB patch is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Can you commit those? I think you still have commit rights with account mhm. The PPC patch itself needs more work: - We need to match the chipset/machine somehow to avoid disasters on untested machines. While that may not be 100% required, I'm wary of bricked machines on an architecture I don't own. - A chipset match where buses_supported = BUS_PARALLEL is set. - A chipset match where you check if the flash chip is accessible... comparing lspci --xxx between flash enabled and flash disabled boots might shed some light on this. Then again, maybe that setting isn't visible in PCI space and such a check is futile. - Side note: Not your fault, but we really need a way for a chipset enable function to tell internal_init that it should return an error. Maybe a special return code for a chipset enable? Regards, Carl-Daniel -- http://www.hailfinger.org/

4 3

[commit] r1421 - trunk
by repository service 26 Aug '11

26 Aug '11

Author: uwe Date: Fri Aug 26 00:54:23 2011 New Revision: 1421 URL: http://flashrom.org/trac/flashrom/changeset/1421 Log: Mark the AMD Am29LV008BB chip as fully tested. Thanks Mattias Mattsson <vitplister(a)gmail.com> for the report. http://www.flashrom.org/pipermail/flashrom/2011-July/007423.html Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Aug 26 00:44:11 2011 (r1420) +++ trunk/flashchips.c Fri Aug 26 00:54:23 2011 (r1421) @@ -428,7 +428,7 @@ .total_size = 1024, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers =

1 0

Re: [flashrom] flashrom on PowerPC (002-lh28f008bjt.patch)
by Stefan Tauner 26 Aug '11

26 Aug '11

On Wed, 27 Jul 2011 18:20:19 +0200 Mattias Mattsson <vitplister(a)gmail.com> wrote: > Index: 82802ab.c > =================================================================== > --- 82802ab.c (revision 1396) > +++ 82802ab.c (working copy) > @@ -208,3 +208,56 @@ > > return 0; > } > + > +int unlock_lh28f008bjt(struct flashchip *flash) > +{ > + chipaddr bios = flash->virtual_memory; > + uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; mixing initialized and declared-only variables is :( > + int i; > + > + /* Wait if chip is busy */ > + wait_82802ab(flash); > + > + /* Read identifier codes */ > + chip_writeb(0x90, bios); > + > + /* Read master lock-bit */ > + mcfg = chip_readb(bios + 0x3); > + msg_cdbg("master lock is "); > + if (mcfg) { > + msg_cdbg("locked!\n"); > + } else { > + msg_cdbg("unlocked!\n"); > + can_unlock = 1; > + } > + > + /* Read block lock-bits, 8 * 8 KiB + 15 * 64 KiB */ although correct, we don't use the IEC prefixes nowhere else... > + for (i = 0; i < flash->total_size * 1024; i+= (i >= (64 * 1024) ? 64 * 1024 : 8 * 1024)) { hm... line limit. looks very odd at first sight. maybe a while loop would be better? > + bcfg = chip_readb(bios + i + 2); // read block lock config /* */? not that i find this convention necessary... > + msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); > + if (bcfg) { > + need_unlock = 1; > + } > + } > + > + /* Reset chip */ > + chip_writeb(0xFF, bios); > + > + /* Unlock: clear block lock-bits, if needed */ > + if (can_unlock && need_unlock) { > + msg_cdbg("Unlock: "); > + chip_writeb(0x60, bios); > + chip_writeb(0xD0, bios); > + chip_writeb(0xFF, bios); > + wait_82802ab(flash); > + msg_cdbg("Done!\n"); > + } > + > + /* Error: master locked or a block is locked */ > + if (!can_unlock && need_unlock) { > + msg_cerr("At least one block is locked and lockdown is active!\n"); > + return -1; > + } > + > + return 0; > +} you start messages lower-case and end them with an exclamation mark very often. we usually do this for errors (or warnings) only. > Index: flashchips.c > =================================================================== > --- flashchips.c (revision 1396) > +++ flashchips.c (working copy) > @@ -5379,6 +5379,36 @@ > > { > .vendor = "Sharp", > + .name = "LH28F008BJT-BTLZ1", why the -BTLZ1 suffix? i have just looked briefly at the LH28F008BJT-BTLZ1 and LH28F008BJT-BTLZC datasheets, but they seem to be almost identical? > + .bustype = BUS_PARALLEL, > + .manufacture_id = SHARP_ID, > + .model_id = SHARP_LH28F008BJxxPB, i am not sure about those id names either, but they are not as important because they are not visible to the user. > + .total_size = 1024, > + .page_size = 64 * 1024, > + .tested = TEST_OK_PREW, > + .probe = probe_82802ab, > + .probe_timing = TIMING_ZERO, > + .block_erasers = > + { > + { > + .eraseblocks = { > + {8 * 1024, 8}, > + {64 * 1024, 15} > + }, > + .block_erase = erase_block_82802ab, > + }, { > + .eraseblocks = { {1024 * 1024, 1} }, > + .block_erase = erase_sector_49lfxxxc, > + } > + }, > + .unlock = unlock_lh28f008bjt, > + .write = write_82802ab, > + .read = read_memmapped, > + .voltage = {2700, 3600}, > + }, > + > + { > + .vendor = "Sharp", > .name = "LHF00L04", > .bustype = BUS_FWH, /* A/A Mux */ > .manufacture_id = SHARP_ID, > Index: chipdrivers.h > =================================================================== > --- chipdrivers.h (revision 1396) > +++ chipdrivers.h (working copy) > @@ -83,6 +83,7 @@ > void print_status_82802ab(uint8_t status); > int unlock_82802ab(struct flashchip *flash); > int unlock_28f004s5(struct flashchip *flash); > +int unlock_lh28f008bjt(struct flashchip *flash); > > /* jedec.c */ > uint8_t oddparity(uint8_t val); -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 2

[commit] r1420 - trunk
by repository service 26 Aug '11

26 Aug '11

Author: uwe Date: Fri Aug 26 00:44:11 2011 New Revision: 1420 URL: http://flashrom.org/trac/flashrom/changeset/1420 Log: Add support for the Sharp LH28F008BJT-BTLZ1 chip. Tested by Mattias Mattsson <vitplister(a)gmail.com> on a PowerPC box. Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/82802ab.c trunk/chipdrivers.h trunk/flashchips.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Thu Aug 25 16:06:50 2011 (r1419) +++ trunk/82802ab.c Fri Aug 26 00:44:11 2011 (r1420) @@ -208,3 +208,58 @@ return 0; } + +int unlock_lh28f008bjt(struct flashchip *flash) +{ + chipaddr bios = flash->virtual_memory; + uint8_t mcfg, bcfg; + uint8_t need_unlock = 0, can_unlock = 0; + int i; + + /* Wait if chip is busy */ + wait_82802ab(flash); + + /* Read identifier codes */ + chip_writeb(0x90, bios); + + /* Read master lock-bit */ + mcfg = chip_readb(bios + 0x3); + msg_cdbg("master lock is "); + if (mcfg) { + msg_cdbg("locked!\n"); + } else { + msg_cdbg("unlocked!\n"); + can_unlock = 1; + } + + /* Read block lock-bits, 8 * 8 KB + 15 * 64 KB */ + for (i = 0; i < flash->total_size * 1024; + i += (i >= (64 * 1024) ? 64 * 1024 : 8 * 1024)) { + bcfg = chip_readb(bios + i + 2); /* read block lock config */ + msg_cdbg("block lock at %06x is %slocked!\n", i, + bcfg ? "" : "un"); + if (bcfg) + need_unlock = 1; + } + + /* Reset chip */ + chip_writeb(0xFF, bios); + + /* Unlock: clear block lock-bits, if needed */ + if (can_unlock && need_unlock) { + msg_cdbg("Unlock: "); + chip_writeb(0x60, bios); + chip_writeb(0xD0, bios); + chip_writeb(0xFF, bios); + wait_82802ab(flash); + msg_cdbg("Done!\n"); + } + + /* Error: master locked or a block is locked */ + if (!can_unlock && need_unlock) { + msg_cerr("At least one block is locked and lockdown is active!\n"); + return -1; + } + + return 0; +} Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Thu Aug 25 16:06:50 2011 (r1419) +++ trunk/chipdrivers.h Fri Aug 26 00:44:11 2011 (r1420) @@ -85,6 +85,7 @@ void print_status_82802ab(uint8_t status); int unlock_82802ab(struct flashchip *flash); int unlock_28f004s5(struct flashchip *flash); +int unlock_lh28f008bjt(struct flashchip *flash); /* jedec.c */ uint8_t oddparity(uint8_t val); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Aug 25 16:06:50 2011 (r1419) +++ trunk/flashchips.c Fri Aug 26 00:44:11 2011 (r1420) @@ -5379,6 +5379,36 @@ { .vendor = "Sharp", + .name = "LH28F008BJT-BTLZ1", + .bustype = BUS_PARALLEL, + .manufacture_id = SHARP_ID, + .model_id = SHARP_LH28F008BJxxPB, + .total_size = 1024, + .page_size = 64 * 1024, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 15} + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_sector_49lfxxxc, + } + }, + .unlock = unlock_lh28f008bjt, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sharp", .name = "LHF00L04", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SHARP_ID,

1 0

Re: [flashrom] Coreboot failure on GA-MA78GM-S2HP Rev. 2.0 motherboard
by QingPei Wang 25 Aug '11

25 Aug '11

that may because of the dual bios method which used by gigabyte, since the slave spi chip is still on the board, the superio may(i guess)detect the CRC error for the main spi bios is changed(coreboot now). you can try to remove the slave spi flash chip. no sure if it works Best wishes Wang Qing Pei Phone: 86+018930528086 On Sat, Aug 20, 2011 at 11:26 PM, Donovan Lavinder <drmario2007(a)gmail.com>wrote: > I originally wanted EFI and other features that will allow me to use my > motherboard for few years out. So, I downloaded archived coreboot firmware > package, and I found one "baked" firmware ROM under folder MA78GM as the > motherboards under this family seems to be having the same chipsets, so I > went to burn my own coreboot in FreeDOS using flashrom. Now, it first > exclaimed that it found MXIC MX25L8005 chipset, but it tried 4-bytes RDID > and failed, however, I was able to erase the BIOS chip fine. Next, I wrote > the firmware - after it said "done", it froze - I reset it, it kept > reverting back to oh-so-annoying Award BIOS... No wonder my motherboard is > SO picky! > > Here, I wrote up on the paper: > flashrom Ver. 0.9.3 - r1205 (on Freedos boot CD - all I have had, no floppy > disk and it won't boot from USB disk.... I may try spare hard drive if > needed...) > - 4-byte RDID refusal (although erasure was successful) > Motherboard: Vendor - Gigabyte / Model - GA-MA78GM-S2HP > CPU: AMD Phenom II X940 Black Series 3.0GHz quad-core (Deneb) CPU > RAM: Crucial Ballistix DDR-II 800MHz 1GB x2 (2GB) on dual-channel memory > bus > Video card: Vendor - Gigabyte / Model - GV-R467ZL-1GI - FW Ver. - F12 / VPU > - AMD Radeon HD 4670 with 1GB 800MHz GDDR3 on 128-bit bus > * I removed my hard drive (with my personal documents and Windows XP) > during the firmware flash to ensure the data aren't touched in a way. > > I would like to know how I can get my motherboard to quit being all so > picky - otherwise any other methods known to work perfectly on the > GA-MA78GM-S2HP motherboard any of you may have up and running the coreboot > firmware. > > Thanks for your help! > > -- > "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!" > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

1 0

[PATCH]add AMD hudson support
by QingPei Wang 25 Aug '11

25 Aug '11

The HUDSON has different vendor & device id than SBx00. The ids are got by lspci. Signed-off-by: Wang Qing Pei <wangqingpei(a)gmail.com> Index: chipset_enable.c =================================================================== --- chipset_enable.c (revision 1419) +++ chipset_enable.c (working copy) @@ -1052,6 +1052,7 @@ {0x1002, 0x4377, OK, "ATI", "SB400", enable_flash_sb400}, {0x1002, 0x438d, OK, "AMD", "SB600", enable_flash_sb600}, {0x1002, 0x439d, OK, "AMD", "SB700/SB710/SB750/SB850", enable_flash_sb600}, + {0x1002, 0x780e, OK, "AMD", "HUDSON", enable_flash_sb600}, {0x100b, 0x0510, NT, "AMD", "SC1100", enable_flash_sc1100}, {0x1022, 0x2080, OK, "AMD", "CS5536", enable_flash_cs5536}, {0x1022, 0x2090, OK, "AMD", "CS5536", enable_flash_cs5536}, Index: sb600spi.c =================================================================== --- sb600spi.c (revision 1419) +++ sb600spi.c (working copy) @@ -259,8 +259,11 @@ smbus_dev = pci_dev_find(0x1002, 0x4385); if (!smbus_dev) { - msg_perr("ERROR: SMBus device not found. Not enabling SPI.\n"); - return ERROR_NONFATAL; + smbus_dev = pci_dev_find(0x1022,0x780b); /*HUDSON*/ + if(!smbus_dev){ + msg_perr("ERROR: SMBus device not found. Not enabling SPI.\n"); + return ERROR_NONFATAL; + } } /* Note about the bit tests below: If a bit is zero, the GPIO is SPI. */ Best wishes Wang Qing Pei Phone: 86+018930528086

1 0

Re: [flashrom] [PATCH] dmi: add "Sealed-case PC" to the list of non-laptop chassis
by Stefan Tauner 25 Aug '11

25 Aug '11

On Thu, 25 Aug 2011 14:44:22 +0200 Idwer Vollering <vidwer(a)gmail.com> wrote: > 2011/8/22 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > > --- > > not sure though if all other computers with that chassis type are "in all > > likelihood not a laptop". > > This writeup looks rather convincing: > http://www.novell.com/communities/node/3519/adding-more-addon-image-files-b… > > > > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > Acked-by: Idwer Vollering <vidwer(a)gmail.com> thanks, i am not fully convinced though, but i have added it to my tested_stuff branch for now, so others can still veto for a while :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Add board enable for ASUS P5LP-LE
by Stefan Tauner 25 Aug '11

25 Aug '11

On Thu, 25 Aug 2011 14:19:33 +0200 Idwer Vollering <vidwer(a)gmail.com> wrote: > Acked-by: Idwer Vollering <vidwer(a)gmail.com> r1419, thanks. i have changed it a bit though: i had to rename the board names of the board enable, because the print.c code is not able to cope with multiple boards with the same name, resulting in output like: ASUS P5LP-LE OK (autodetected)(autodetected) i hope everyone can live with the result :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1419 - trunk
by repository service 25 Aug '11

25 Aug '11

Author: stefanct Date: Thu Aug 25 16:06:50 2011 New Revision: 1419 URL: http://flashrom.org/trac/flashrom/changeset/1419 Log: Add board enable for ASUS P5LP-LE Based on the REing of Michael Karcher and a good guess of Idwer Vollering. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Leon Zhang <leoncamel at gmail.com> http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html Tested-by: medhi <nefkongo(a)hotmail.com> http://paste.flashrom.org/view.php?id=779 Acked-by: Idwer Vollering <vidwer(a)gmail.com> --- i have added the DMI match and changed the board enable and wiki comments a bit. i am not sure if this is the right way to add it, because there are so many variations, but we can change that later too. Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sat Aug 20 16:16:00 2011 (r1418) +++ trunk/board_enable.c Thu Aug 25 16:06:50 2011 (r1419) @@ -1517,6 +1517,9 @@ /* * Suited for: * - ASUS A8Jm (laptop): Intel 945 + ICH7 + * - ASUS P5LP-LE used in ... + * - HP Media Center m7270.fr Desktop PC as "Lithium-UL8E" + * - Epson Endeavor MT7700 */ static int intel_ich_gpio34_raise(void) { @@ -2024,6 +2027,8 @@ {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GD2-Premium$", NULL, NULL, P3, "ASUS", "P5GD2 Premium", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, P3, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x27b8, 0x103c, 0x2a22, 0x8086, 0x2770, 0x103c, 0x2a22, "^LITHIUM$", NULL, NULL, P3, "ASUS", "P5LP-LE (Lithium-UL8E)",0, OK, intel_ich_gpio34_raise}, + {0x8086, 0x27b8, 0x1043, 0x2a22, 0x8086, 0x2770, 0x1043, 0x2a22, "^P5LP-LE$", NULL, NULL, P3, "ASUS", "P5LP-LE (Epson OEM)", 0, OK, intel_ich_gpio34_raise}, {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179, "^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2", 0, NT, intel_ich_gpio16_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Sat Aug 20 16:16:00 2011 (r1418) +++ trunk/print.c Thu Aug 25 16:06:50 2011 (r1419) @@ -483,6 +483,9 @@ B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), + B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), + B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), + B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL),

1 0

Re: [flashrom] [PATCH] Make the laptop warning less scary if unsure
by Idwer Vollering 25 Aug '11

25 Aug '11

2011/8/20 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > Telling the user to use "force_I_want_a_brick" if it is not even a > laptop, is a bit over-the-top. Introduce a new laptop parameter > "this_is_not_a_laptop" that allows to force operation, but only if > the detection is not sure. > > --- > > complicates the whole thing a bit. could do without the extra > variable and new part of the if condition, if we allow the > this_is_not_a_laptop parameter to always work, not only if the > laptop detection is uncertain. it will be undocumented and only > visible to the user together with the warning anyway... I was curious whether the currently present overriding parameter works in combination with the parameter in this patch, and it does: $ sudo ./flashrom -V -p internal:laptop=force_I_want_a_brick -p internal:laptop=this_is_not_a_laptop flashrom v0.9.4-r1418 on FreeBSD 9.0-BETA1 (i386), built with libpci 3.1.7, GCC 4.2.2 20070831 prerelease [FreeBSD], little endian (etcetera) Do you think this behaviour is desired? > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > internal.c | 14 ++++++++------ > 1 files changed, 8 insertions(+), 6 deletions(-) > > diff --git a/internal.c b/internal.c > index 846cf1e..5ff605e 100644 > --- a/internal.c > +++ b/internal.c > @@ -139,6 +139,7 @@ int internal_init(void) > int ret = 0; > #endif > int force_laptop = 0; > + int not_a_laptop = 0; > char *arg; > > arg = extract_programmer_param("boardenable"); > @@ -170,9 +171,11 @@ int internal_init(void) > free(arg); > > arg = extract_programmer_param("laptop"); > - if (arg && !strcmp(arg,"force_I_want_a_brick")) { > + if (arg && !strcmp(arg,"force_I_want_a_brick")) > force_laptop = 1; > - } else if (arg && !strlen(arg)) { > + else if (arg && !strcmp(arg,"this_is_not_a_laptop")) > + not_a_laptop = 1; > + else if (arg && !strlen(arg)) { > msg_perr("Missing argument for laptop.\n"); > free(arg); > return 1; > @@ -237,7 +240,7 @@ int internal_init(void) > msg_perr("WARNING! You may be running flashrom on an unsupported laptop. We could\n" > "not detect this for sure because your vendor has not setup the SMBIOS\n" > "tables correctly. You can enforce execution by adding\n" > - "'-p internal:laptop=force_I_want_a_brick' to the command line, but\n" > + "'-p internal:laptop=this_is_not_a_laptop' to the command line, but\n" > "please read the following warning if you are not sure.\n\n"); > } > msg_perr("Laptops, notebooks and netbooks are difficult to support and we\n" > @@ -251,9 +254,8 @@ int internal_init(void) > "You have been warned.\n" > "========================================================================\n"); > > - if (force_laptop) { > - msg_perr("Proceeding anyway because user specified " > - "laptop=force_I_want_a_brick\n"); > + if (force_laptop || (not_a_laptop && (is_laptop != 1))) { > + msg_perr("Proceeding anyway because user forced us to.\n"); > } else { > msg_perr("Aborting.\n"); > exit(1); > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

1 0

Re: [flashrom] [PATCH] dmi: add "Sealed-case PC" to the list of non-laptop chassis
by Idwer Vollering 25 Aug '11

25 Aug '11

2011/8/22 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > --- > not sure though if all other computers with that chassis type are "in all > likelihood not a laptop". This writeup looks rather convincing: http://www.novell.com/communities/node/3519/adding-more-addon-image-files-b… > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer(a)gmail.com> > --- > dmi.c | 1 + > 1 files changed, 1 insertions(+), 0 deletions(-) > > diff --git a/dmi.c b/dmi.c > index 8f78376..5f64b94 100644 > --- a/dmi.c > +++ b/dmi.c > @@ -81,6 +81,7 @@ static const struct { > {0x0e, 1, "Sub Notebook"}, > {0x11, 0, "Main Server Chassis"}, > {0x17, 0, "Rack Mount Chassis"}, > + {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ > }; > > #define DMI_COMMAND_LEN_MAX 260 > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

1 0

Re: [flashrom] [PATCH] Add board enable for ASUS P5LP-LE
by Idwer Vollering 25 Aug '11

25 Aug '11

2011/8/25 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > Based on the REing of Michael Karcher The result can be found here: http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html > and a good guess of Idwer Vollering. > > Tested-by: Leon Zhang <leoncamel at gmail.com> > Tested-by: medhi Tested-by: medhi <nefkongo(a)hotmail.com> Acked-by: Idwer Vollering <vidwer(a)gmail.com> > --- > i have added the DMI match and changed the board enable and wiki comments > a bit. i am not sure if this is the right way to add it, because there are so many > variations, but we can change that later too. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > board_enable.c | 5 +++++ > print.c | 1 + > 2 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/board_enable.c b/board_enable.c > index b362b54..0f2300c 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -1517,6 +1517,9 @@ static int intel_ich_gpio22_raise(void) > /* > * Suited for: > * - ASUS A8Jm (laptop): Intel 945 + ICH7 > + * - ASUS P5LP-LE used in ... > + * - HP Media Center m7270.fr Desktop PC as "Lithium-UL8E" > + * - Epson Endeavor MT7700 > */ > static int intel_ich_gpio34_raise(void) > { > @@ -2024,6 +2027,8 @@ const struct board_pciid_enable board_pciid_enables[] = { > {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, > {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GD2-Premium$", NULL, NULL, P3, "ASUS", "P5GD2 Premium", 0, OK, intel_ich_gpio21_raise}, > {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, P3, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, > + {0x8086, 0x27b8, 0x103c, 0x2a22, 0x8086, 0x2770, 0x103c, 0x2a22, "^LITHIUM$", NULL, NULL, P3, "ASUS", "P5LP-LE", 0, OK, intel_ich_gpio34_raise}, > + {0x8086, 0x27b8, 0x1043, 0x2a22, 0x8086, 0x2770, 0x1043, 0x2a22, "^P5LP-LE$", NULL, NULL, P3, "ASUS", "P5LP-LE", 0, OK, intel_ich_gpio34_raise}, > {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179, "^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2", 0, NT, intel_ich_gpio16_raise}, > {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, > {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, > diff --git a/print.c b/print.c > index c25cb3e..42e031a 100644 > --- a/print.c > +++ b/print.c > @@ -483,6 +483,7 @@ const struct board_info boards_known[] = { > B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), > B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), > B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), > + B("ASUS", "P5LP-LE", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP and Epson (Endeavor MT7700). The HP names vary and not all of them were tested."), > B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), > B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), > B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

1 0

[PATCH] Add board enable for ASUS P5LP-LE
by Stefan Tauner 25 Aug '11

25 Aug '11

Based on the REing of Michael Karcher and a good guess of Idwer Vollering. Tested-by: Leon Zhang <leoncamel at gmail.com> Tested-by: medhi --- i have added the DMI match and changed the board enable and wiki comments a bit. i am not sure if this is the right way to add it, because there are so many variations, but we can change that later too. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- board_enable.c | 5 +++++ print.c | 1 + 2 files changed, 6 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index b362b54..0f2300c 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1517,6 +1517,9 @@ static int intel_ich_gpio22_raise(void) /* * Suited for: * - ASUS A8Jm (laptop): Intel 945 + ICH7 + * - ASUS P5LP-LE used in ... + * - HP Media Center m7270.fr Desktop PC as "Lithium-UL8E" + * - Epson Endeavor MT7700 */ static int intel_ich_gpio34_raise(void) { @@ -2024,6 +2027,8 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, "^P5GD2-Premium$", NULL, NULL, P3, "ASUS", "P5GD2 Premium", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, P3, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x27b8, 0x103c, 0x2a22, 0x8086, 0x2770, 0x103c, 0x2a22, "^LITHIUM$", NULL, NULL, P3, "ASUS", "P5LP-LE", 0, OK, intel_ich_gpio34_raise}, + {0x8086, 0x27b8, 0x1043, 0x2a22, 0x8086, 0x2770, 0x1043, 0x2a22, "^P5LP-LE$", NULL, NULL, P3, "ASUS", "P5LP-LE", 0, OK, intel_ich_gpio34_raise}, {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179, "^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2", 0, NT, intel_ich_gpio16_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, diff --git a/print.c b/print.c index c25cb3e..42e031a 100644 --- a/print.c +++ b/print.c @@ -483,6 +483,7 @@ const struct board_info boards_known[] = { B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), + B("ASUS", "P5LP-LE", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP and Epson (Endeavor MT7700). The HP names vary and not all of them were tested."), B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), -- 1.7.1

1 0

Re: [flashrom] [PATCH] Board enable for ASUS P5LP-LE
by Uwe Hermann 25 Aug '11

25 Aug '11

On Wed, Aug 18, 2010 at 06:27:15PM +0200, Michael Karcher wrote: > + * - ASUS P5LP-LE (Epson/HP OEM) OK, this one is going to be interesting. The board is made by ASUS for HP, it seems. HP calls it "Leonite" or "Leonite-GL8E". http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c008… But that would have been too easy. There are a bunch of other boards on the HP site which are also called P5LP-LE, but have different HP code names. From a quick glance I see at least: P5LP-LE (Leonite) P5LP-LE (Leonite2) P5LP-LE (Lithium) P5LP-LE (Limestone) P5LP-LE (Emery) Fun! I don't know how to differ between them, the dmidecode from Leon Zhang <leoncamel(a)gmail.com> said: DMI string system-manufacturer: "EPSON DIRECT CORP." DMI string system-product-name: "Endeavor MT7700" DMI string system-version: "" DMI string baseboard-manufacturer: "ASUSTek Computer INC." DMI string baseboard-product-name: "P5LP-LE" We don't know if other "P5LP-LE" might have the "Leonite" (or other) HP code name in there or not. Maybe something is printed as silkscreen on the board? An then one of these HP OEM boards is built into the Epson "Endeavor MT7700" system/PC. So it's a bit unclear which vendor/board name we should use in this case. It's probably best to mention all of them for better googling results. Attached is a slightly updated patch for review, let me know what you think. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

3 2

Failed Flashing Intel 3420 Chipset
by Shailendra Sodhi 25 Aug '11

25 Aug '11

Hi, Hi we use flashroom tool to flash our X8DTH and X8DTU Supermicro boards now when we try to flash X8SIE-F Motherboard with Intel 3420 chipset flashrom fails with error. Attached a file(s) detailing error. Please let me know if any further information required to make this work. Regards, Shailendra

2 2

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches
by Tadas Slotkus 24 Aug '11

24 Aug '11

> I'm using the 0.9.4 from http://www.flashrom.org/Downloads. > > Isn't this the latest? For developing patches use latest svn revision.

1 0

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches
by Stefan Tauner 24 Aug '11

24 Aug '11

On Wed, 24 Aug 2011 15:38:03 +0200 "Frei, Thomas (GE Germany)" <Thomas.Frei(a)ge.com> wrote: > Hi, > > I applied the patches 0001 - 0007, but now flashrom doesn't compile any more... :-( > > flashrom.c: In function verify_flash: > flashrom.c: 1234:3: error: implicit declaration of function msg_gsbg2 > flashrom.c: At top level: > flashrom.c: 1305:5: error: redefinition of write_buf_to_file > flashrom.c: 1281:5: note: previous definition of write_buf_to_file was here > flashrom.c: In function write_buf_to_file: > flashrom.c: 1311:2: error: implicit declaration of function write_dump_to_file > > can you please help here? > hi hm. how did you apply them? the reason i ask is because "msg_gsbg2" should have been "msg_gdbg2" (message general debug2) and it actually is in my posted patches afaics. the patches compile on my machine (on top of r1416 btw, probably other revisions too, but that's the one i compile tested with a few moments ago). which revision did you checkout/extract/fetch before applying the patches? i assume you are using one that is too old. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[RFC] unsignify flashchip and programmer structs
by Stefan Tauner 23 Aug '11

23 Aug '11

i don't like the use of generic "int" qualifiers at all, even more the unsigned version for things like absolute addresses, lengths and sizes. of course negative values make sense in return types to indicate errors and in the case a function returns the length of actually bytes written on success and negative values on errors it makes sense to keep the parameters the same type (else the parameter length might be too big to return it on success). i would also like to change the types to more accurate ones someday (uint32_t etc.) instead, but i think that is not important as signedness. i want to assure myself that no one objects changing the following things to unsigned before i create a patch (which should be straight forward, but of course i will need to change quite many lines and also check that all functions will stay correct...). please speak up now or forever hold your peace etc... :) spi_programmer: int max_data_read; int max_data_write; (start + len parameters of:) int (*read)(struct flashchip *flash, uint8_t *buf, int start, int len); int (*write_256)(struct flashchip *flash, uint8_t *buf, int start, int len); (the return values just indicate success and failure with 0 and 1) struct flashchip: int total_size; (should also be converted to bytes instead of kB... i know this is on the todo already) int page_size; (start + len parameters of:) int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); (again, the return value just indicates success, not bytes written) }; -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 1

Re: [flashrom] ASUS P5N-D
by Joshua Roys 23 Aug '11

23 Aug '11

On 08/18/2011 04:17 AM, Guillaume Poirier-Morency wrote: > I've been told, after an unsuccessful flashing, to send you these > outputs about my motherboard. > > My board remained intact! > > If you are interested into enabling it and developing patches to make it > compatible, I do not mind giving you feedback. > > Regards, > > Arteymis > > Hello, Please try the attached patch on top of the latest SVN and let us know how it works (reply with the output from `flashrom -Vw [...]'). For the devs: the board enable was identical to the P5N-E SLI, so I have bundled them together. Josh

3 4

Re: [flashrom] ASUS P5N-D
by Stefan Tauner 23 Aug '11

23 Aug '11

On Tue, 23 Aug 2011 06:13:26 -0400 Guillaume Poirier-Morency <guillaumepoiriermorency(a)gmail.com> wrote: > I have checked my bash history. You were right, I was using 9.2. > > I have then moved to the svn folder and used ./flashrom and curiously, look > at what I have got from the log file... > > The file is slightly different, but it's still showing version 9.2 > > Launching the flashrom executable without any arguments, it tells me I'm > using 9.4 > > I suppose there is version typo in the program itself. Otherwise, maybe the > patch affect the version this way. i seriously doubt that. there is only a single string containing the version in the program and only one place where this single string is printed... i would recommend uninstalling the old version anyway. in this case it was not important, but in other cases it may break stuff. > Anyway, It's really using 9.4 and it works very well! that's the important thing anyway :) i'll make the appropriate changes in our repository, thanks for testing! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] ASUS P5N-D
by Stefan Tauner 23 Aug '11

23 Aug '11

On Tue, 23 Aug 2011 05:34:28 -0400 Guillaume Poirier-Morency <guillaumepoiriermorency(a)gmail.com> wrote: > I think there will soon be a new supported motherboard on your list! > > Here's the flashrom -Vw [...] output. nice! but what did you do exactly? the log shows version 0.9.2. did you patch that ancient version? why? could it be that you just rewrote with the old version by accident to get the verbose log? NB: the write protection remains disabled until reboot. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 ([PATCH] (not for merge) ichspi: print BFPR (BIOS Flash Primary Region Register))
by Stefan Tauner 23 Aug '11

23 Aug '11

On Tue, 23 Aug 2011 08:41:35 +0200 "Frei, Thomas (GE Germany)" <Thomas.Frei(a)ge.com> wrote: > please send me this patch - I first want to read out the flash - and if this works, I will try to write... > > I need this for production test. i have already posted my patches in the (sub)thread named "[PATCH 0/7] every layout handling feature you ever wanted to see but never cared to implement". if you are not subscribed to the list you could also fetch them from http://patchwork.coreboot.org/project/flashrom/list/ (all those with date 2011-08-19). i will mail them to you separately this time. you need at least 1-5 to be able to read. > Will this patch work without a layout file? I fnot, can you tell me how to generate it? no, it will not work without one. there is apparently no way to flash beyond the regions defined by the flash descriptor. the layout file can limit the address range accessed (to make it work). depending on how fine-grained you wanna use it you can define in the layout file ranges for each region as defined by the flash descriptor on your board (from this output of flashrom:) 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0001 (FREG2: Management Engine) 0x00001000-0x001fffff is read-write or just define one range for the whole accessible area (that would be something like 0x0 - 0x003fffff i would say) i think you will probably need to set the read_all_first variable in flashrom.c to 0 (and maybe also use the -w parameter) to be able to write without errors printed, else flashrom will try to read the whole flash before and after writing to verify its contents. i have told you already at least twice to look into our documentation. you know that this is my spare time and i am not here to do your work... if you have concrete questions about layout files or their usage we are happy to answer that, but "how do we do that?" makes me kinda angry, if it is already documented. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[carFl mem] Reduce memory buffers
by Tadas Slotkus 22 Aug '11

22 Aug '11

Hi all, Sending initial patches, which reduce memory usage for flashrom in coreboot. Look 0-9 patches. To get some laugh at my stupidity look for 10-21 :) Thanks, Tadas

1 1

[PATCH] spi25: get rid of unneccessary line breaks (on failed probes)
by Stefan Tauner 22 Aug '11

22 Aug '11

--- not sure if this is correct for all execution paths, but it fixes the output of a probe on my thinkpad. i have looked a bit around to find examples of code that this patch would break and found none though. without this patch: Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010.REMS, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3017 with this patch: Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010.REMS, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3017 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- spi25.c | 4 ---- 1 files changed, 0 insertions(+), 4 deletions(-) diff --git a/spi25.c b/spi25.c index 937ee5d..c9fe9ec 100644 --- a/spi25.c +++ b/spi25.c @@ -120,7 +120,6 @@ static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) uint32_t id2; if (spi_rdid(readarr, bytes)) { - msg_cdbg("\n"); return 0; } @@ -201,7 +200,6 @@ int probe_spi_rems(struct flashchip *flash) uint32_t id1, id2; if (spi_rems(readarr)) { - msg_cdbg("\n"); return 0; } @@ -259,7 +257,6 @@ int probe_spi_res1(struct flashchip *flash) } if (spi_res(readarr, 1)) { - msg_cdbg("\n"); return 0; } @@ -283,7 +280,6 @@ int probe_spi_res2(struct flashchip *flash) uint32_t id1, id2; if (spi_res(readarr, 2)) { - msg_cdbg("\n"); return 0; } -- 1.7.1

1 0

[PATCH] dmi: add "Sealed-case PC" to the list of non-laptop chassis
by Stefan Tauner 22 Aug '11

22 Aug '11

--- not sure though if all other computers with that chassis type are "in all likelihood not a laptop". Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- dmi.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/dmi.c b/dmi.c index 8f78376..5f64b94 100644 --- a/dmi.c +++ b/dmi.c @@ -81,6 +81,7 @@ static const struct { {0x0e, 1, "Sub Notebook"}, {0x11, 0, "Main Server Chassis"}, {0x17, 0, "Rack Mount Chassis"}, + {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ }; #define DMI_COMMAND_LEN_MAX 260 -- 1.7.1

1 0

Re: [flashrom] flashrom accepts its command line parameters as a file name to read to
by Stefan Tauner 22 Aug '11

22 Aug '11

On Thu, 18 Aug 2011 17:57:59 +0200 Idwer Vollering <vidwer(a)gmail.com> wrote: > 2011/8/18 Christophe Poncy <cp(a)canaxis.org>: > > Hi, > > > > ... > > > # ./flashrom -r -L > > This shouldn't be allowed. hm. actually i think this is normal behavior (for getopt-using applications). one arbitrary example: grep [OPTIONS] [-e PATTERN | -f FILE] [FILE...] # grep -e -f cli_classic.c this uses "-f" as a search pattern to look for in cli_classic.c i do agree though, that it might be unexpected, especially for windows users. and even if it is expected behavior no one would miss it, if we prohibit it. > What about disallowing the creation of files that have a name listed > in cli_classic.c's optstring[] and/or long_options[] ? or prohibiting any option parameters to be started with "-" (this includes all the file names, but also: - chip names (not an issue so far) - mainboard names (ditto) - layout file names and region names (probably tolerable too) - programmer parameters (also not an issue i presume) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch
by Stefan Tauner 21 Aug '11

21 Aug '11

On Sun, 21 Aug 2011 08:40:54 -0600 Donovan Lavinder <drmario2007(a)gmail.com> wrote: > > here's the log: > > ;root@sysresccd /root % flashrom > ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with libpci > 3.1. > ;7, GCC 4.4.5, little endian > ;flashrom is free software, get the source code at http://www.flashrom.org > ; > ; > ;Calibrating delay loop... OK. > ;coreboot table found at 0x6fffe000. > ;Found ITE Super I/O, ID 0x8718. > ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK. > ;This chipset supports the following protocols: LPC,FWH,SPI. > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ; > > After that, that's it.... > a verbose one (with -V or even -VVV) please i am not familiar with the it87xx code, but i would say it hangs in the while loop at the end of it8716f_spi_send_command. it would be easy to add a timeout there, but the question is why it does hang there (now). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] MSI H55-GD65 (MS-7637) (H55, locked ME region, FLOCKDN=0(!))
by Bernd Blaauw 21 Aug '11

21 Aug '11

Op 21-8-2011 3:40, Donovan Lavinder schreef: > to use Linux Live CD mentioned in flashrom download page, as FreeDOS > have managed to brick all of the firmware image I have been trying to > flash. Fed up, I went to get the live CD, it works now. I used > SystemRescueCd distro (you need to figure out how to mount the hard > drive or jump drive to be able to have flashrom to download the firmware > ROM - for example: mount /dev/sda1 /mnt/disk0 ), so far, this distro is > quite nice to have! I thought ramdisks make fine temporary storage? No need to mount harddisk then. It seems a bit strange to claim FreeDOS (or DJGPP-compiled flashrom) ruined your flash image. I guess file hashes would give a definitive answer to what's the issue. I have to admit though that sometimes that FreeDOS kernel has had some FAT-related issues, no guarantee they're all solved. goodluck with CoreBoot as well! So far the Asrock E350 board seems best to experiment with, though I'd like the fanless/passive Asus E350 board instead.

1 0

Re: [flashrom] Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch
by Donovan Lavinder 21 Aug '11

21 Aug '11

> here's the log: ;root@sysresccd /root % flashrom ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with libpci 3.1. ;7, GCC 4.4.5, little endian ;flashrom is free software, get the source code at http://www.flashrom.org ; ; ;Calibrating delay loop... OK. ;coreboot table found at 0x6fffe000. ;Found ITE Super I/O, ID 0x8718. ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK. ;This chipset supports the following protocols: LPC,FWH,SPI. ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ; After that, that's it.... On Sun, Aug 21, 2011 at 8:26 AM, Donovan Lavinder <drmario2007(a)gmail.com>wrote: > The flashrom is the only program that froze when looking for the flash > chip. I have tried cold reboot - same thing happened. That here, was a > head-scratcher since it is not even supposed to happen. Probably it could be > because the firmware unmounted itself (shouldn't happen). The whole OS ran > fine otherwise (I could close the frozen flashrom program with ease). I am > wondering how could SuperIO refuse the handshake between the flashrom - I > left it alone for a while, no change in the behavior (as far as the verbose > terminal emulator was concerned). > > > On Sun, Aug 21, 2011 at 8:05 AM, Stefan Tauner < > stefan.tauner(a)student.tuwien.ac.at> wrote: > >> On Sun, 21 Aug 2011 07:27:02 -0600 >> Donovan Lavinder <drmario2007(a)gmail.com> wrote: >> >> > That's strange. I have tried rewriting the firmware so I COULD provide >> you >> > the text file... It froze after couple complaints of 4-byte RDID not >> found >> > (it just ignored that before), and I tried just "flashrom", same thing. >> Now >> > that's a can of worm. It was 100% successful - verified and signed. Now >> I am >> > somewhat confused. I may have to wait for a while (thankfully I still >> have a >> > Windows laptop so I could write up the report on progresses of the >> firmware >> > ROM.) >> >> the 4 byte RDID warnings should not matter. the chip you have does not >> need it. it is just printed for other chips that are probed for by >> flashrom. you can use the -c <chipname> parameter to probe for the >> correct chip only. regarding the lockup i can't say much without a log, >> but that it should not happen. :) does it reliably happen while probing >> for the same chip or is it (seemingly) random? could you also please >> define "froze" precisely? is it flashrom alone or the whole OS etc? >> >> -- >> Kind regards/Mit freundlichen Grüßen, Stefan Tauner >> > > > > -- > "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!" > -- "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!"

1 0

Re: [flashrom] Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch
by Stefan Tauner 21 Aug '11

21 Aug '11

On Sun, 21 Aug 2011 07:27:02 -0600 Donovan Lavinder <drmario2007(a)gmail.com> wrote: > That's strange. I have tried rewriting the firmware so I COULD provide you > the text file... It froze after couple complaints of 4-byte RDID not found > (it just ignored that before), and I tried just "flashrom", same thing. Now > that's a can of worm. It was 100% successful - verified and signed. Now I am > somewhat confused. I may have to wait for a while (thankfully I still have a > Windows laptop so I could write up the report on progresses of the firmware > ROM.) the 4 byte RDID warnings should not matter. the chip you have does not need it. it is just printed for other chips that are probed for by flashrom. you can use the -c <chipname> parameter to probe for the correct chip only. regarding the lockup i can't say much without a log, but that it should not happen. :) does it reliably happen while probing for the same chip or is it (seemingly) random? could you also please define "froze" precisely? is it flashrom alone or the whole OS etc? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch
by Stefan Tauner 21 Aug '11

21 Aug '11

On Sat, 20 Aug 2011 18:57:26 -0600 Donovan Lavinder <drmario2007(a)gmail.com> wrote: > After a day of struggling with bricked firmwares.... I finally ditched > FreeDOS. I went with SystemRescueCd distro and burnt coreboot precompiled > firmware under the folder /gigabyte_ma78gm/ and the firmware WORKED! But now > I am stuck with funny firmware quirks (Windows XP crashing when booting > halfway, almost to the point the video card driver is loaded, right after > "GIVEIO.SYS" driver is being loaded), even though it loaded Linux CD fine. I > guess I should try and ditch PS/2 mouse as it may probably be the cause of > strange behavior - I will be using USB mouse / keyboard as well. I am happy > with this firmware otherwise. And, the backup BIOS didn't even try to > intercept the Linux kernel in the firmware from loading. Thankfully. I will > eventually decide to recompile or "submit" the additional payloads such as > EFI and memtest86+ as those software will be needed in the future, after I > learn more of its capabilities. > > And, thanks for such a wonderful firmware! That thing's so fast! > congratulations :) this mail probably should have been sent to coreboot(a)coreboot.org though (too). btw could you provide a log of a successful flashrom write please? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] MSI H55-GD65 (MS-7637) (H55, locked ME region, FLOCKDN=0(!))
by Stefan Tauner 21 Aug '11

21 Aug '11

On Sat, 20 Aug 2011 19:40:55 -0600 Donovan Lavinder <drmario2007(a)gmail.com> wrote: > You guys can also use flashrom utility to be able to write the firmware if > the utility you are using is being stubborn (happens to me too), hi donovan, we are talking about flashrom explicitly here.. because it is the mailing list of flashrom (and not coreboot). to be precise, we are talking about implementing a new feature to flashrom. this has almost nothing to do with coreboot. > […] -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] MSI H55-GD65 (MS-7637) (H55, locked ME region, FLOCKDN=0(!))
by Stefan Tauner 21 Aug '11

21 Aug '11

On Sat, 20 Aug 2011 23:03:16 +0100 (BST) Luzipher McLeod <luziphermcleod(a)yahoo.ie> wrote: > Thanks for your mails ! Good to know that there is something going on (even though you indicate that it'll take quite some time). If I can do anything to help, just let me know. if you are good at REing you could help a lot (because i am a n00b regarding x86 asm, and therefor quite unmotivated to stare at disassembly - especially when i see how fluently others are able to read this :). > That said, it really seems to be a messed up situation. As far as I understood, there are several "units" involved in accessing the flash (or at least granting rights to access the flash). yes. the firmware for the ME, the GbE controller and the host (=BIOS/EFI) are on the same flash chip and all of them can access it via the southbridge. they do also write to it (the ME logs some stuff at least). access restrictions are enforced by the southbridge which acts as a gatekeeper. > Am I right that the major missing thing is support for the embedded controller (ME) ? exactly. usually that is the only real problem. the flash descriptor region is most often read-only, but that's not really an issue (it does not need to be updated normally). i *think* to know how the ME can be told to give us access superficially (using HECI/MEI), but i don't know the exact details. i have a patch already that implements MEI communication in flashrom... the question is just what to send (and what to expect to receive :) > I also do have a flashing utility that works from DOS if that'd be any help (reverse engineering) ? there are various of those and RE is the way to go probably (because intel won't tell us probably). having access to the binary is not the problem though. > > PS: Wir können auch deutsch schreiben, ich hab's mal in Englisch verfasst, weil du erwähnt hast, das das ganze evtl auch der Dokumentation für etwaige Nachfolgerwahnsinnige dient :-) if it is not too hard for you, english is the way to go because it is the least common denominator of those involved. i think i should write together what i know about unlocking the ME. probably a wiki page would be best... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Update of Gigabyte GA-MA78GM-S2HP motherboard firmware switch
by Donovan Lavinder 21 Aug '11

21 Aug '11

After a day of struggling with bricked firmwares.... I finally ditched FreeDOS. I went with SystemRescueCd distro and burnt coreboot precompiled firmware under the folder /gigabyte_ma78gm/ and the firmware WORKED! But now I am stuck with funny firmware quirks (Windows XP crashing when booting halfway, almost to the point the video card driver is loaded, right after "GIVEIO.SYS" driver is being loaded), even though it loaded Linux CD fine. I guess I should try and ditch PS/2 mouse as it may probably be the cause of strange behavior - I will be using USB mouse / keyboard as well. I am happy with this firmware otherwise. And, the backup BIOS didn't even try to intercept the Linux kernel in the firmware from loading. Thankfully. I will eventually decide to recompile or "submit" the additional payloads such as EFI and memtest86+ as those software will be needed in the future, after I learn more of its capabilities. And, thanks for such a wonderful firmware! That thing's so fast! -- "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!"

1 0

Coreboot failure on GA-MA78GM-S2HP Rev. 2.0 motherboard
by Donovan Lavinder 20 Aug '11

20 Aug '11

I originally wanted EFI and other features that will allow me to use my motherboard for few years out. So, I downloaded archived coreboot firmware package, and I found one "baked" firmware ROM under folder MA78GM as the motherboards under this family seems to be having the same chipsets, so I went to burn my own coreboot in FreeDOS using flashrom. Now, it first exclaimed that it found MXIC MX25L8005 chipset, but it tried 4-bytes RDID and failed, however, I was able to erase the BIOS chip fine. Next, I wrote the firmware - after it said "done", it froze - I reset it, it kept reverting back to oh-so-annoying Award BIOS... No wonder my motherboard is SO picky! Here, I wrote up on the paper: flashrom Ver. 0.9.3 - r1205 (on Freedos boot CD - all I have had, no floppy disk and it won't boot from USB disk.... I may try spare hard drive if needed...) - 4-byte RDID refusal (although erasure was successful) Motherboard: Vendor - Gigabyte / Model - GA-MA78GM-S2HP CPU: AMD Phenom II X940 Black Series 3.0GHz quad-core (Deneb) CPU RAM: Crucial Ballistix DDR-II 800MHz 1GB x2 (2GB) on dual-channel memory bus Video card: Vendor - Gigabyte / Model - GV-R467ZL-1GI - FW Ver. - F12 / VPU - AMD Radeon HD 4670 with 1GB 800MHz GDDR3 on 128-bit bus * I removed my hard drive (with my personal documents and Windows XP) during the firmware flash to ensure the data aren't touched in a way. I would like to know how I can get my motherboard to quit being all so picky - otherwise any other methods known to work perfectly on the GA-MA78GM-S2HP motherboard any of you may have up and running the coreboot firmware. Thanks for your help! -- "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!"

1 0

[PATCH] Makefile: Fix MinGW build, improve output with bogus CC
by Uwe Hermann 20 Aug '11

20 Aug '11

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1418 - trunk
by repository service 20 Aug '11

20 Aug '11

Author: uwe Date: Sat Aug 20 16:16:00 2011 New Revision: 1418 URL: http://flashrom.org/trac/flashrom/changeset/1418 Log: Makefile: Fix MinGW build, improve output with bogus CC. As per IRC discussion, the "ARCH :=" line should be moved after any lines which set CC, as it uses CC itself. This fixes the MinGW build. Also, add a "2>/dev/null" in the "ARCH :=" as per suggestion from Stefan Tauner to improve the output in the case CC is bogus: Before: $ make CC=foo /bin/sh: foo: not found Checking for a C compiler... not found. make: *** [compiler] Error 1 After: $ make CC=foo Checking for a C compiler... not found. make: *** [compiler] Error 1 Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Aug 20 16:14:22 2011 (r1417) +++ trunk/Makefile Sat Aug 20 16:16:00 2011 (r1418) @@ -37,9 +37,6 @@ CFLAGS += -Werror endif -# Determine the destination processor architecture -override ARCH := $(strip $(shell LC_ALL=C $(CC) -E arch.h|grep -v '^\#')) - # FIXME We have to differentiate between host and target OS architecture. OS_ARCH ?= $(shell uname) ifneq ($(OS_ARCH), SunOS) @@ -202,6 +199,12 @@ endif endif +# Determine the destination processor architecture. +# IMPORTANT: The following line must be placed before ARCH is ever used +# (of course), but should come after any lines setting CC because the line +# below uses CC itself. In some cases we set CC based on OS_ARCH, see above. +override ARCH := $(strip $(shell LC_ALL=C $(CC) -E arch.h 2>/dev/null | grep -v '^\#')) + ifeq ($(ARCH), "ppc") # There's no PCI port I/O support on PPC/PowerPC, yet. ifeq ($(CONFIG_NIC3COM), yes)

1 0

[PATCH] Move the main() function from flashrom.c to cli_classic.c
by Uwe Hermann 20 Aug '11

20 Aug '11

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

4 6

[commit] r1417 - trunk
by repository service 20 Aug '11

20 Aug '11

Author: uwe Date: Sat Aug 20 16:14:22 2011 New Revision: 1417 URL: http://flashrom.org/trac/flashrom/changeset/1417 Log: Move the main() function from flashrom.c to cli_classic.c. The file flashrom.c is part of libflashrom and should thus not contain a main() function, that would break compilation of all frontends using libflashrom. Also, cli_classic.c is the right place anyway, as it's the main() of the CLI tool. Rename the simple wrapper cli_classic() in cli_classic.c to main(), as it's not really needed. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/cli_classic.c trunk/flash.h trunk/flashrom.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Thu Aug 18 04:27:19 2011 (r1416) +++ trunk/cli_classic.c Sat Aug 20 16:14:22 2011 (r1417) @@ -96,7 +96,7 @@ exit(1); } -int cli_classic(int argc, char *argv[]) +int main(int argc, char *argv[]) { unsigned long size; /* Probe for up to three flash chips. */ Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Aug 18 04:27:19 2011 (r1416) +++ trunk/flash.h Sat Aug 20 16:14:22 2011 (r1417) @@ -251,9 +251,6 @@ #define msg_pspew(...) print(MSG_BARF, __VA_ARGS__) /* programmer debug barf */ #define msg_cspew(...) print(MSG_BARF, __VA_ARGS__) /* chip debug barf */ -/* cli_classic.c */ -int cli_classic(int argc, char *argv[]); - /* layout.c */ int read_romlayout(char *name); int find_romentry(char *name); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Aug 18 04:27:19 2011 (r1416) +++ trunk/flashrom.c Sat Aug 20 16:14:22 2011 (r1417) @@ -1796,11 +1796,6 @@ } } -int main(int argc, char *argv[]) -{ - return cli_classic(argc, argv); -} - /* FIXME: This function signature needs to be improved once doit() has a better * function signature. */

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom