- flashrom - mail.coreboot.org

[commit] r1471 - trunk
by repository service 02 Dec '11

02 Dec '11

Author: stefanct Date: Fri Dec 2 22:48:17 2011 New Revision: 1471 URL: http://flashrom.org/trac/flashrom/changeset/1471 Log: Add a bunch of new/tested stuff and various small changes 9 Tested mainboards: OK: - ABIT NF-M2S http://www.flashrom.org/pipermail/flashrom/2011-October/008155.html - ASUS P5K-VM http://www.flashrom.org/pipermail/flashrom/2011-October/008172.html - ASUS M5A99X EVO http://www.flashrom.org/pipermail/flashrom/2011-October/008152.html - ASUS Z8PE-D12 http://www.flashrom.org/pipermail/flashrom/2011-November/008195.html - PC Engines Alix.2d3 http://www.flashrom.org/pipermail/flashrom/2011-November/008244.html NOT OK: - ASUS P8H61 PRO http://www.flashrom.org/pipermail/flashrom/2011-November/008308.html - ASUS P8P67 (rev. 3.1) http://www.flashrom.org/pipermail/flashrom/2011-November/008292.html - MSI MS-7613 (Iona-GL8E) http://www.flashrom.org/pipermail/flashrom/2011-November/008295.html - MSI MS-7635 (H55M-ED55) http://www.flashrom.org/pipermail/flashrom/2011-October/008167.html - Supermicro X9SCL http://www.flashrom.org/pipermail/flashrom/2011-November/008254.html - ZOTAC H67-ITX WiFi http://paste.flashrom.org/view.php?id=902 Tested flash chips: - mark Pm29F002T as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-October/008171.html - mark AMIC A49LF040A as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-November/008244.html - mark Winbond W39V040FC as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-November/008281.html - source format fixes Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/print.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Nov 23 10:13:48 2011 (r1470) +++ trunk/flashchips.c Fri Dec 2 22:48:17 2011 (r1471) @@ -1288,7 +1288,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -5204,9 +5204,9 @@ .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_FIXME, .block_erasers = { { @@ -8649,7 +8649,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -9027,6 +9027,7 @@ .probe = probe_spi_rdid, .write = NULL, }, + { .vendor = "Generic", .name = "unknown SPI chip (REMS)", Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Nov 23 10:13:48 2011 (r1470) +++ trunk/print.c Fri Dec 2 22:48:17 2011 (r1471) @@ -545,6 +545,7 @@ B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."), B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "NF-M2S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), @@ -622,6 +623,7 @@ B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/product.aspx?P_ID=Gdf0vtpVf72LTYgs", NULL), + B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), B("ASUS", "M6Ne", 0, "http://www.asus.com/Product.aspx?P_ID=IbqN4JCxeRiep4WN", "Untested board enable."), B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -657,8 +659,10 @@ B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), B("ASUS", "P5GDC-V Deluxe", 1, NULL, NULL), B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), + B("ASUS", "P5K-VM", 1, "http://www.asus.com/product.aspx?P_ID=EJybwaQ3J8goocW2", NULL), B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), + B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/product.aspx?P_ID=G0BQ4fIXoM1P38TZ", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), @@ -677,7 +681,10 @@ B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), + B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/product.aspx?P_ID=z1K4qLpLmyLfwXtw", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -818,7 +825,9 @@ B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL), - B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), + B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), + B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), @@ -830,6 +839,7 @@ B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL), B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL), B("PC Engines", "Alix.2c3", 1, "http://pcengines.ch/alix2c3.htm", NULL), + B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL), B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL), B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL), B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL), @@ -863,6 +873,7 @@ B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), + B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL), @@ -911,6 +922,7 @@ B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif

1 0

Numonyx M25P40 - erase & write OK
by Nikita Schmidt 02 Dec '11

02 Dec '11

Hello, I have successfully used flashrom to program Numonyx M25P40-VMB6TPB, which identifies itself as an ST M25P40. The report is attached. Nikita

1 0

P8H61 PRO
by Pavel Petrov 30 Nov '11

30 Nov '11

flashrom --read /bios.rom -V flashrom v0.9.4-r1394 on Linux 3.0.0-14-generic-pae (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3351M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 986 us, 10000 myus = 9984 us, 4 myus = 3 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H61 PRO" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x3b, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x4d, id2 0x65, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x4d, id2 0x65, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xf7, id2 0xf0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0xb77d48a0 Restoring MMIO space at 0xb77d489c Restoring MMIO space at 0xb77d4898 Restoring MMIO space at 0xb77d4896 Restoring MMIO space at 0xb77d4894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Untested chipset' verbose log
by Eugene vm_ 29 Nov '11

29 Nov '11

Hello! Sending you verbose flashrom log for VIA VT82C686A/B, marked as untested. Feel free to request any additional hardware or software config information. Regards. -- Eugene 'vm_' Vdovenko<vm_(a)viem77.org>

1 0

Re: [flashrom] [PATCH] ichspi.c: warn user when a protected region is detected
by David Hendricks 27 Nov '11

27 Nov '11

On Sat, Nov 26, 2011 at 3:35 PM, Stefan Tauner < stefan.tauner(a)student.tuwien.ac.at> wrote: > This includes the notorious read-only flash descriptors and locked ME > regions. > --- > non-verbose sample output from my laptop: > […] > Found chipset "Intel QS57". Enabling flash write... WARNING: SPI > Configuration Lockdown activated. > WARNING: Flash Descriptor region is not fully accessible and flashrom can > not deal with this correctly yet. Intel does not provide us the necessary > documention to support this. To be fair, I think Intel documents it fine. I think what we've got to do is checking the flash descriptor override pin strap status (FDOPSS). If it is cleared then we can ignore the descriptor, otherwise if it is set then we need to avoid locked regions. It's really just a pain in the ass and, as you pointed out, may leave the BIOS/ME firmware blobs in an inconsistent or incompatible state. So the onus is on the user to ensure a safe upgrade path if only part of the ROM can be updated. It's probably worth displaying a warning and requiring "--force" or something in that scenario.

1 0

[PATCH] ichspi.c: warn user when a protected region is detected
by Stefan Tauner 27 Nov '11

27 Nov '11

This includes the notorious read-only flash descriptors and locked ME regions. --- non-verbose sample output from my laptop: […] Found chipset "Intel QS57". Enabling flash write... WARNING: SPI Configuration Lockdown activated. WARNING: Flash Descriptor region is not fully accessible and flashrom can not deal with this correctly yet. Intel does not provide us the necessary documention to support this. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. WARNING: Management Engine region is not fully accessible and flashrom can not deal with this correctly yet. Intel does not provide us the necessary documention to support this. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. OK. Found Winbond flash chip "W25X64" (8192 kB, SPI) at physical address 0xff800000. […] Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- ichspi.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/ichspi.c b/ichspi.c index 78cdb3b..4bd04d0 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1447,6 +1447,15 @@ static void do_ich9_spi_frap(uint32_t frap, int i) msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff), access_names[rwperms]); + if (rwperms != 0x3) + msg_pinfo("WARNING: %s region is not fully accessible and " + "flashrom can\nnot deal with this correctly yet. " + "Intel does not provide us the necessary\n" + "documention to support this. Please send a verbose " + "log to\nflashrom(a)flashrom.org if this board is not " + "listed on\n" + "http://flashrom.org/Supported_hardware#Supported_mainboards " + "yet.\n", region_names[i]); } /* In contrast to FRAP and the master section of the descriptor the bits -- 1.7.1

1 0

SST25LF040A
by Vladimir Monchenko 26 Nov '11

26 Nov '11

Hi. I have tested reading, erasing and writing with SPI flash SST25LF040A. All works OK. Report in attachment. Regards, Vladimir Monchenko.

2 1

P8P67 REV 3.1 - Intel P67
by Gerhard Scheikl 26 Nov '11

26 Nov '11

description: Motherboard product: P8P67 REV 3.1 vendor: ASUSTeK Computer INC. physical id: 0 version: Rev 1.xx *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1704 date: 06/08/2011 size: 64KiB capacity: 4032KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification flashrom v0.9.4-r1394 on Linux 3.1.0-030100-meins (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3432M loops per second, 10 myus = 10 us, 100 myus = 123 us, 1000 myus = 982 us, 10000 myus = 9809 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8P67 REV 3.1" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel P67" with PCI ID 8086:1c46. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x6c, id2 0x52, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x3a, id2 0xfb, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x3a, id2 0xfb, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x57, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 No operations were specified. Restoring MMIO space at 0x7f549377f8a0 Restoring MMIO space at 0x7f549377f89c Restoring MMIO space at 0x7f549377f898 Restoring MMIO space at 0x7f549377f896 Restoring MMIO space at 0x7f549377f894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Intel H57 chipset (untested) and W25Q64 flash -V output
by Pontus Rodling 26 Nov '11

26 Nov '11

Hi! flashrom told me to send you guys this, so here it is. I'm getting a transaction error when trying to read the (fully supported according to the wiki) W25Q64 flash chip on a Intel H57 chipset which is marked as untested. I tried both using swseq and hwseq. Both results are attached. // Pontus Rodling

3 2

[PATCH] Speed up dediprog writes
by Carl-Daniel Hailfinger 25 Nov '11

25 Nov '11

Totally untested patch, may exhaust the write limit of your flash chip or cause other weirdnesses. Don't blame me. Yes, there is other dediprog stuff in that patch as well. Need to finish that, but right now I need testers. If it works, all chips which use spi_chip_write_256 should be written at native speed. Chips using spi_chip_write_1 or spi_chip_write_aai will still be slow. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-dediprog_unknown_commands/dediprog.c =================================================================== --- flashrom-dediprog_unknown_commands/dediprog.c (Revision 1470) +++ flashrom-dediprog_unknown_commands/dediprog.c (Arbeitskopie) @@ -30,6 +30,7 @@ static usb_dev_handle *dediprog_handle; static int dediprog_firmwareversion; static int dediprog_endpoint; +static int dediprog_firmwareversion; #if 0 /* Might be useful for other pieces of code as well. */ @@ -299,22 +300,109 @@ return 0; } +/* Bulk write interface, will read multiple page_size byte chunks aligned to page_size bytes. + * @start start address + * @len length + * @return 0 on success, 1 on failure + */ +static int dediprog_spi_bulk_write(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) +{ + int ret; + unsigned int i; + /* USB transfer size must be 512, other sizes will NOT work at all. + * chunksize is the real data size per USB bulk transfer. The remaining + * space in a USB bulk transfer must be filled with 0xff padding. + */ + const unsigned int chunksize = flash->page_size; + const unsigned int count = len / chunksize; + const char count_and_chunk[] = {count & 0xff, + (count >> 8) & 0xff, + chunksize & 0xff, + (chunksize >> 8) & 0xff}; + char usbbuf[512]; + + if ((start % chunksize) || (len % chunksize)) { + msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " + "at flashrom(a)flashrom.org\n", __func__, start, len); + return 1; + } + + /* No idea if the hardware can handle empty writes, so chicken out. */ + if (!len) + return 0; + /* Command Write SPI Bulk. No idea which write command is used on the + * SPI side. + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, + start / 0x10000, (char *)count_and_chunk, + sizeof(count_and_chunk), DEFAULT_TIMEOUT); + if (ret != sizeof(count_and_chunk)) { + msg_perr("Command Write SPI Bulk failed, %i %s!\n", ret, + usb_strerror()); + return 1; + } + + for (i = 0; i < count; i++) { + memset(usbbuf, 0xff, sizeof(usbbuf)); + memcpy(usbbuf, buf + i * chunksize, chunksize); + ret = usb_bulk_write(dediprog_handle, dediprog_endpoint, + usbbuf, 512, + DEFAULT_TIMEOUT); + if (ret != 512) { + msg_perr("SPI bulk write failed, expected %i, got %i " + "%s!\n", 512, ret, usb_strerror()); + return 1; + } + } + + return 0; +} + static int dediprog_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; + const unsigned int chunksize = flash->page_size; + unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; + unsigned int bulklen; dediprog_set_leds(PASS_OFF|BUSY_ON|ERROR_OFF); - /* No idea about the real limit. Maybe 12, maybe more, maybe less. */ - ret = spi_write_chunked(flash, buf, start, len, 12); + if (residue) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, residue); + /* No idea about the real limit. Maybe 12, maybe more. */ + ret = spi_write_chunked(flash, buf, start, residue, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } - if (ret) + /* Round down. */ + bulklen = (len - residue) / chunksize * chunksize; + ret = dediprog_spi_bulk_write(flash, buf + residue, start + residue, + bulklen); + if (ret) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); - else - dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return ret; + } - return ret; + len -= residue + bulklen; + if (len) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, len); + ret = spi_write_chunked(flash, buf + residue + bulklen, + start + residue + bulklen, len, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } + + dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return 0; } static int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -491,8 +579,80 @@ } return 0; } + +/* Start/stop blinking? + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command J + */ +static int dediprog_command_g(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x03, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command G failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Something. + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String + * Always followed by Command Set SPI Voltage nonzero + */ +static int dediprog_command_h(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x05, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command H failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} #endif +/* Shutdown for firmware 5.x? + * Present in all logs with firmware 5.1.5 + * Often preceded by a SPI operation (Command Read SPI Bulk or Receive SPI) + * Always followed by Command Set SPI Voltage 0x0000 + */ +static int dediprog_command_i(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x06, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command I failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +#if 0 +/* Start/stop blinking? + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String on 5.1.5 + * Always followed by Command Set SPI Voltage nonzero on 5.1.5 + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command B in eng_detect_blink.log + * Followed by Command G in eng_detect_blink.log + */ +static int dediprog_command_j(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x07, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command J failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} +#endif + static int parse_voltage(char *voltage) { char *tmp = NULL; @@ -555,6 +715,11 @@ { msg_pspew("%s\n", __func__); + /* Shutdown on firmware 5.x */ + if (dediprog_firmwareversion == 5) + if (dediprog_command_i()) + return 1; + /* URB 28. Command Set SPI Voltage to 0. */ if (dediprog_set_spi_voltage(0x0)) return 1; -- http://www.hailfinger.org/

1 0

Re: [flashrom] [PATCH] Unsignify lengths and addresses in chip functions and structs
by Carl-Daniel Hailfinger 23 Nov '11

23 Nov '11

Am 19.09.2011 02:01 schrieb Stefan Tauner: > Push those changes forward where needed to prevent new sign > conversion warnings where possible. Thanks for your patch. > this is a crude rework of the reverted patch. i have tried to push > unsignedness wherever possible, but there are some problems: > ffs, min, max and some library/system calls require signed ints or > return them or both. We might want to provide type-safe min/max macros for those cases. An example is at http://gcc.gnu.org/onlinedocs/gcc/Typeof.html Not essential for this patch, but might be nice to have anyway. Later. > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > > diff --git a/flash.h b/flash.h > index 535c1b8..e7bfd4e 100644 > --- a/flash.h > +++ b/flash.h > @@ -121,8 +121,10 @@ struct flashchip { > > int (*probe) (struct flashchip *flash); > > - /* Delay after "enter/exit ID mode" commands in microseconds. */ > - int probe_timing; > + /* Delay after "enter/exit ID mode" commands in microseconds. > + * NB: negative values have special meanings, see TIMING_* below. > + */ > + signed int probe_timing; AFAICS the C standard defines that int is always signed. The only exception is char which is implementation-defined. Please kill signed here, but keep your comment. > > /* > * Erase blocks and associated erase function. Any chip erase function > diff --git a/ft2232_spi.c b/ft2232_spi.c > index 8ab89fa..8f00685 100644 > --- a/ft2232_spi.c > +++ b/ft2232_spi.c > @@ -106,10 +106,10 @@ static const char *get_ft2232_vendorname(int ft2232_vid, int ft2232_type) > } > > static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, > - int size) > + unsigned int size) > { > int r; > - r = ftdi_write_data(ftdic, (unsigned char *) buf, size); > + r = ftdi_write_data(ftdic, (unsigned char *) buf, (int)size); This cast is a sign that something is odd. Can you keep size as a signed int? > if (r < 0) { > msg_perr("ftdi_write_data: %d, %s\n", r, > ftdi_get_error_string(ftdic)); > @@ -119,19 +119,19 @@ static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, > } > > static int get_buf(struct ftdi_context *ftdic, const unsigned char *buf, > - int size) > + unsigned int size) > { > int r; > > while (size > 0) { > - r = ftdi_read_data(ftdic, (unsigned char *) buf, size); > + r = ftdi_read_data(ftdic, (unsigned char *) buf, (int)size); Same here. > if (r < 0) { > msg_perr("ftdi_read_data: %d, %s\n", r, > ftdi_get_error_string(ftdic)); > return 1; > } > - buf += r; > - size -= r; > + buf += (unsigned int)r; > + size -= (unsigned int)r; ... > } > return 0; > } > @@ -332,9 +332,10 @@ static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, > struct ftdi_context *ftdic = &ftdic_context; > static unsigned char *buf = NULL; > /* failed is special. We use bitwise ops, but it is essentially bool. */ > - int i = 0, ret = 0, failed = 0; > - int bufsize; > - static int oldbufsize = 0; > + int ret = 0, failed = 0; > + unsigned int i = 0; > + unsigned int bufsize; > + static unsigned int oldbufsize = 0; > > if (writecnt > 65536 || readcnt > 65536) > return SPI_INVALID_LENGTH; get_buf and send_buf calls should be checked for size>=INT_MAX and the cast should happen in the call, not in get_buf/send_buf. > diff --git a/serprog.c b/serprog.c > index 9d554c9..94ae1c6 100644 > --- a/serprog.c > +++ b/serprog.c > @@ -707,7 +707,7 @@ uint8_t serprog_chip_readb(const chipaddr addr) > /* Local version that really does the job, doesn't care of max_read_n. */ > static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) > { > - int rd_bytes = 0; > + unsigned int rd_bytes = 0; > unsigned char sbuf[6]; > msg_pspew("%s: addr=0x%lx len=%lu\n", __func__, addr, (unsigned long)len); > /* Stream the read-n -- as above. */ > @@ -725,7 +725,7 @@ static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) > int r = read(sp_fd, buf + rd_bytes, len - rd_bytes); > if (r <= 0) > sp_die("Error: cannot read read-n data"); > - rd_bytes += r; > + rd_bytes += (unsigned int)r; Odd cast, but safe. You correctly analyzed that situation. > } while (rd_bytes != len); > return; > } > The flashrom.c changes were really hard to verify, but that's not your fault. The code in there is not easy to understand, but you got it exactly right. With the above comments this is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 4

[commit] r1470 - trunk
by repository service 23 Nov '11

23 Nov '11

Author: stefanct Date: Wed Nov 23 10:13:48 2011 New Revision: 1470 URL: http://flashrom.org/trac/flashrom/changeset/1470 Log: Unsignify lengths and addresses in chip functions and structs Push those changes forward where needed to prevent new sign conversion warnings where possible. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/82802ab.c trunk/buspirate_spi.c trunk/chipdrivers.h trunk/dediprog.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.c trunk/ichspi.c trunk/it87spi.c trunk/jedec.c trunk/linux_spi.c trunk/m29f400bt.c trunk/opaque.c trunk/pm49fl00x.c trunk/programmer.h trunk/serprog.c trunk/spi.c trunk/spi25.c trunk/sst28sf040.c trunk/sst49lfxxxc.c trunk/w39.c trunk/wbsio_spi.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/82802ab.c Wed Nov 23 10:13:48 2011 (r1470) @@ -141,7 +141,7 @@ } /* chunksize is 1 */ -int write_82802ab(struct flashchip *flash, uint8_t *src, int start, int len) +int write_82802ab(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr dst = flash->virtual_memory + start; Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/buspirate_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -295,7 +295,8 @@ const unsigned char *writearr, unsigned char *readarr) { static unsigned char *buf = NULL; - int i = 0, ret = 0; + unsigned int i = 0; + int ret = 0; if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) return SPI_INVALID_LENGTH; Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/chipdrivers.h Wed Nov 23 10:13:48 2011 (r1470) @@ -41,9 +41,9 @@ int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, int start, int len); -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); -int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len); uint8_t spi_read_status_register(void); int spi_write_status_register(struct flashchip *flash, int status); void spi_prettyprint_status_register_bit(uint8_t status, int bit); @@ -51,17 +51,17 @@ void spi_prettyprint_status_register_welwip(uint8_t status); int spi_prettyprint_status_register(struct flashchip *flash); int spi_disable_blockprotect(struct flashchip *flash); -int spi_byte_program(int addr, uint8_t databyte); -int spi_nbyte_program(int addr, uint8_t *bytes, int len); -int spi_nbyte_read(int addr, uint8_t *bytes, int len); -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len); +int spi_byte_program(unsigned int addr, uint8_t databyte); +int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_nbyte_read(unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); /* opaque.c */ int probe_opaque(struct flashchip *flash); -int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); -int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); +int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); /* a25.c */ @@ -87,7 +87,7 @@ uint8_t wait_82802ab(struct flashchip *flash); int probe_82802ab(struct flashchip *flash); int erase_block_82802ab(struct flashchip *flash, unsigned int page, unsigned int pagesize); -int write_82802ab(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_82802ab(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void print_status_82802ab(uint8_t status); int unlock_82802ab(struct flashchip *flash); int unlock_28f004s5(struct flashchip *flash); @@ -100,8 +100,8 @@ int write_byte_program_jedec(chipaddr bios, uint8_t *src, chipaddr dst); int probe_jedec(struct flashchip *flash); -int write_jedec(struct flashchip *flash, uint8_t *buf, int start, int len); -int write_jedec_1(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_jedec_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize); int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); int erase_chip_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); @@ -110,7 +110,7 @@ int probe_m29f400bt(struct flashchip *flash); int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); -int write_m29f400bt(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_m29f400bt(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void protect_m29f400bt(chipaddr bios); /* pm49fl00x.c */ @@ -120,7 +120,7 @@ /* sst28sf040.c */ int erase_chip_28sf040(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int erase_sector_28sf040(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int write_28sf040(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_28sf040(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int unprotect_28sf040(struct flashchip *flash); int protect_28sf040(struct flashchip *flash); Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/dediprog.c Wed Nov 23 10:13:48 2011 (r1470) @@ -206,13 +206,13 @@ * @return 0 on success, 1 on failure */ static int dediprog_spi_bulk_read(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { int ret; - int i; + unsigned int i; /* chunksize must be 512, other sizes will NOT work at all. */ - const int chunksize = 0x200; - const int count = len / chunksize; + const unsigned int chunksize = 0x200; + const unsigned int count = len / chunksize; const char count_and_chunk[] = {count & 0xff, (count >> 8) & 0xff, chunksize & 0xff, @@ -253,14 +253,14 @@ return 0; } -static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len) +static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) { int ret; /* chunksize must be 512, other sizes will NOT work at all. */ - const int chunksize = 0x200; - int residue = start % chunksize ? chunksize - start % chunksize : 0; - int bulklen; + const unsigned int chunksize = 0x200; + unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; + unsigned int bulklen; dediprog_set_leds(PASS_OFF|BUSY_ON|ERROR_OFF); @@ -300,7 +300,7 @@ } static int dediprog_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { int ret; Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/dummyflasher.c Wed Nov 23 10:13:48 2011 (r1470) @@ -46,24 +46,24 @@ }; static enum emu_chip emu_chip = EMULATE_NONE; static char *emu_persistent_image = NULL; -static int emu_chip_size = 0; +static unsigned int emu_chip_size = 0; #if EMULATE_SPI_CHIP -static int emu_max_byteprogram_size = 0; -static int emu_max_aai_size = 0; -static int emu_jedec_se_size = 0; -static int emu_jedec_be_52_size = 0; -static int emu_jedec_be_d8_size = 0; -static int emu_jedec_ce_60_size = 0; -static int emu_jedec_ce_c7_size = 0; +static unsigned int emu_max_byteprogram_size = 0; +static unsigned int emu_max_aai_size = 0; +static unsigned int emu_jedec_se_size = 0; +static unsigned int emu_jedec_be_52_size = 0; +static unsigned int emu_jedec_be_d8_size = 0; +static unsigned int emu_jedec_ce_60_size = 0; +static unsigned int emu_jedec_ce_c7_size = 0; #endif #endif -static int spi_write_256_chunksize = 256; +static unsigned int spi_write_256_chunksize = 256; static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_dummyflasher = { .type = SPI_CONTROLLER_DUMMY, @@ -320,8 +320,8 @@ static int emulate_spi_chip_response(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - int offs; - static int aai_offs; + unsigned int offs; + static int unsigned aai_offs; static int aai_active = 0; if (writecnt == 0) { @@ -549,7 +549,7 @@ } static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { return spi_write_chunked(flash, buf, start, len, spi_write_256_chunksize); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/flash.h Wed Nov 23 10:13:48 2011 (r1470) @@ -108,9 +108,9 @@ uint32_t model_id; /* Total chip size in kilobytes */ - int total_size; + unsigned int total_size; /* Chip page size in bytes */ - int page_size; + unsigned int page_size; int feature_bits; /* @@ -121,8 +121,10 @@ int (*probe) (struct flashchip *flash); - /* Delay after "enter/exit ID mode" commands in microseconds. */ - int probe_timing; + /* Delay after "enter/exit ID mode" commands in microseconds. + * NB: negative values have special meanings, see TIMING_* below. + */ + signed int probe_timing; /* * Erase blocks and associated erase function. Any chip erase function @@ -143,8 +145,8 @@ int (*printlock) (struct flashchip *flash); int (*unlock) (struct flashchip *flash); - int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); - int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); struct { uint16_t min; uint16_t max; @@ -202,7 +204,7 @@ extern const char flashrom_version[]; extern char *chip_to_probe; void map_flash_registers(struct flashchip *flash); -int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); +int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_flash(struct flashchip *flash); int probe_flash(int startchip, struct flashchip *fill_flash, int force); int read_flash_to_file(struct flashchip *flash, const char *filename); @@ -210,8 +212,8 @@ int max(int a, int b); void tolower_string(char *str); char *extract_param(char **haystack, const char *needle, const char *delim); -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, const char *message); -int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran); +int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message); +int need_erase(uint8_t *have, uint8_t *want, unsigned int len, enum write_granularity gran); char *strcat_realloc(char *dest, const char *src); void print_version(void); void print_banner(void); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/flashrom.c Wed Nov 23 10:13:48 2011 (r1470) @@ -412,7 +412,7 @@ flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); } -int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len) +int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) { chip_readn(buf, flash->virtual_memory + start, len); @@ -535,7 +535,7 @@ } /* start is an offset to the base address of the flash chip */ -int check_erased_range(struct flashchip *flash, int start, int len) +int check_erased_range(struct flashchip *flash, unsigned int start, unsigned int len) { int ret; uint8_t *cmpbuf = malloc(len); @@ -558,10 +558,10 @@ * @message string to print in the "FAILED" message * @return 0 for success, -1 for failure */ -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, +int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message) { - int i; + unsigned int i; uint8_t *readbuf = malloc(len); int ret = 0, failcount = 0; @@ -639,10 +639,10 @@ * @gran write granularity (enum, not count) * @return 0 if no erase is needed, 1 otherwise */ -int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran) +int need_erase(uint8_t *have, uint8_t *want, unsigned int len, enum write_granularity gran) { int result = 0; - int i, j, limit; + unsigned int i, j, limit; switch (gran) { case write_gran_1bit: @@ -705,11 +705,13 @@ * in relation to the max write length of the programmer and the max write * length of the chip. */ -static int get_next_write(uint8_t *have, uint8_t *want, int len, - int *first_start, enum write_granularity gran) -{ - int need_write = 0, rel_start = 0, first_len = 0; - int i, limit, stride; +static unsigned int get_next_write(uint8_t *have, uint8_t *want, unsigned int len, + unsigned int *first_start, + enum write_granularity gran) +{ + int need_write = 0; + unsigned int rel_start = 0, first_len = 0; + unsigned int i, limit, stride; switch (gran) { case write_gran_1bit: @@ -1030,7 +1032,7 @@ int verify_flash(struct flashchip *flash, uint8_t *buf) { int ret; - int total_size = flash->total_size * 1024; + unsigned int total_size = flash->total_size * 1024; msg_cinfo("Verifying flash... "); @@ -1208,7 +1210,8 @@ unsigned int addr, unsigned int len)) { - int starthere = 0, lenhere = 0, ret = 0, skip = 1, writecount = 0; + unsigned int starthere = 0, lenhere = 0; + int ret = 0, skip = 1, writecount = 0; enum write_granularity gran = write_gran_256bytes; /* FIXME */ /* curcontents and newcontents are opaque to walk_eraseregions, and Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/ichspi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -1278,7 +1278,8 @@ return 0; } -int ich_hwseq_read(struct flashchip *flash, uint8_t *buf, int addr, int len) +int ich_hwseq_read(struct flashchip *flash, uint8_t *buf, unsigned int addr, + unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; @@ -1315,7 +1316,8 @@ return 0; } -int ich_hwseq_write(struct flashchip *flash, uint8_t *buf, int addr, int len) +int ich_hwseq_write(struct flashchip *flash, uint8_t *buf, unsigned int addr, + unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/it87spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -106,9 +106,9 @@ static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_it87xx = { .type = SPI_CONTROLLER_IT87XX, @@ -313,9 +313,10 @@ /* Page size is usually 256 bytes */ static int it8716f_spi_page_program(struct flashchip *flash, uint8_t *buf, - int start) + unsigned int start) { - int i, result; + unsigned int i; + int result; chipaddr bios = flash->virtual_memory; result = spi_write_enable(); @@ -340,7 +341,7 @@ * Need to read this big flash using firmware cycles 3 byte at a time. */ static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { fast_spi = 0; @@ -358,7 +359,7 @@ } static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { /* * IT8716F only allows maximum of 512 kb SPI chip size for memory @@ -374,7 +375,7 @@ (flash->page_size > 256)) { spi_chip_write_1(flash, buf, start, len); } else { - int lenhere; + unsigned int lenhere; if (start % flash->page_size) { /* start to the end of the page or to start + len, Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/jedec.c Wed Nov 23 10:13:48 2011 (r1470) @@ -91,7 +91,7 @@ msg_cdbg("%s: excessive loops, i=0x%x\n", __func__, i); } -static int getaddrmask(struct flashchip *flash) +static unsigned int getaddrmask(struct flashchip *flash) { switch (flash->feature_bits & FEATURE_ADDR_MASK) { case FEATURE_ADDR_FULL: @@ -355,12 +355,12 @@ } /* chunksize is 1 */ -int write_jedec_1(struct flashchip *flash, uint8_t *src, int start, int len) +int write_jedec_1(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i, failed = 0; chipaddr dst = flash->virtual_memory + start; chipaddr olddst; - int mask; + unsigned int mask; mask = getaddrmask(flash); @@ -376,14 +376,14 @@ return failed; } -int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, int start, int page_size) +int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int page_size) { int i, tried = 0, failed; uint8_t *s = src; chipaddr bios = flash->virtual_memory; chipaddr dst = bios + start; chipaddr d = dst; - int mask; + unsigned int mask; mask = getaddrmask(flash); @@ -424,15 +424,15 @@ * This function is a slightly modified copy of spi_write_chunked. * Each page is written separately in chunks with a maximum size of chunksize. */ -int write_jedec(struct flashchip *flash, uint8_t *buf, int start, int len) +int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) { - int i, starthere, lenhere; + unsigned int i, starthere, lenhere; /* FIXME: page_size is the wrong variable. We need max_writechunk_size * in struct flashchip to do this properly. All chips using * write_jedec have page_size set to max_writechunk_size, so * we're OK for now. */ - int page_size = flash->page_size; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -461,7 +461,7 @@ int erase_chip_block_jedec(struct flashchip *flash, unsigned int addr, unsigned int blocksize) { - int mask; + unsigned int mask; mask = getaddrmask(flash); if ((addr != 0) || (blocksize != flash->total_size * 1024)) { @@ -474,7 +474,7 @@ int probe_jedec(struct flashchip *flash) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return probe_jedec_common(flash, mask); @@ -482,7 +482,7 @@ int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int size) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_sector_jedec_common(flash, page, size, mask); @@ -490,7 +490,7 @@ int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int size) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_block_jedec_common(flash, page, size, mask); @@ -498,7 +498,7 @@ int erase_chip_jedec(struct flashchip *flash) { - int mask; + unsigned int mask; mask = getaddrmask(flash); return erase_chip_jedec_common(flash, mask); Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/linux_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -36,10 +36,10 @@ static int linux_spi_shutdown(void *data); static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *txbuf, unsigned char *rxbuf); -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len); +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len); static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len); + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_linux = { .type = SPI_CONTROLLER_LINUX, @@ -131,14 +131,14 @@ return 0; } -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len) +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len) { - return spi_read_chunked(flash, buf, start, len, getpagesize()); + return spi_read_chunked(flash, buf, start, len, (unsigned)getpagesize()); } static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, - int start, int len) + unsigned int start, unsigned int len) { - return spi_write_chunked(flash, buf, start, len, getpagesize() - 4); + return spi_write_chunked(flash, buf, start, len, ((unsigned)getpagesize()) - 4); } Modified: trunk/m29f400bt.c ============================================================================== --- trunk/m29f400bt.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/m29f400bt.c Wed Nov 23 10:13:48 2011 (r1470) @@ -28,7 +28,7 @@ functions. */ /* chunksize is 1 */ -int write_m29f400bt(struct flashchip *flash, uint8_t *src, int start, int len) +int write_m29f400bt(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; Modified: trunk/opaque.c ============================================================================== --- trunk/opaque.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/opaque.c Wed Nov 23 10:13:48 2011 (r1470) @@ -53,7 +53,7 @@ return opaque_programmer->probe(flash); } -int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->read) { msg_perr("%s called before register_opaque_programmer. " @@ -64,7 +64,7 @@ return opaque_programmer->read(flash, buf, start, len); } -int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->write) { msg_perr("%s called before register_opaque_programmer. " Modified: trunk/pm49fl00x.c ============================================================================== --- trunk/pm49fl00x.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/pm49fl00x.c Wed Nov 23 10:13:48 2011 (r1470) @@ -22,10 +22,10 @@ #include "flash.h" -static void write_lockbits_49fl00x(chipaddr bios, int size, - unsigned char bits, int block_size) +static void write_lockbits_49fl00x(chipaddr bios, unsigned int size, + unsigned char bits, unsigned int block_size) { - int i, left = size; + unsigned int i, left = size; for (i = 0; left >= block_size; i++, left -= block_size) { /* pm49fl002 */ Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/programmer.h Wed Nov 23 10:13:48 2011 (r1470) @@ -563,23 +563,23 @@ #define MAX_DATA_WRITE_UNLIMITED 256 struct spi_programmer { enum spi_controller type; - int max_data_read; - int max_data_write; + unsigned int max_data_read; + unsigned int max_data_write; int (*command)(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int (*multicommand)(struct spi_command *cmds); /* Optimized functions for this programmer */ - int (*read)(struct flashchip *flash, uint8_t *buf, int start, int len); - int (*write_256)(struct flashchip *flash, uint8_t *buf, int start, int len); + int (*read)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write_256)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); }; extern const struct spi_programmer *spi_programmer; int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int default_spi_send_multicommand(struct spi_command *cmds); -int default_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); +int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); void register_spi_programmer(const struct spi_programmer *programmer); /* ichspi.c */ @@ -625,8 +625,8 @@ int max_data_write; /* Specific functions for this programmer */ int (*probe) (struct flashchip *flash); - int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); - int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); }; extern const struct opaque_programmer *opaque_programmer; Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/serprog.c Wed Nov 23 10:13:48 2011 (r1470) @@ -302,8 +302,8 @@ static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, - int len); +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, + unsigned int start, unsigned int len); static struct spi_programmer spi_programmer_serprog = { .type = SPI_CONTROLLER_SERPROG, .max_data_read = MAX_DATA_READ_UNLIMITED, @@ -822,11 +822,10 @@ * the advantage that it is much faster for most chips, but breaks those with * non-contiguous address space (like AT45DB161D). When spi_read_chunked is * fixed this method can be removed. */ -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int i; - int cur_len; - const int max_read = spi_programmer_serprog.max_data_read; + unsigned int i, cur_len; + const unsigned int max_read = spi_programmer_serprog.max_data_read; for (i = 0; i < len; i += cur_len) { int ret; cur_len = min(max_read, (len - i)); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -97,9 +97,9 @@ return result; } -int default_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int max_data = spi_programmer->max_data_read; + unsigned int max_data = spi_programmer->max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " @@ -109,9 +109,9 @@ return spi_read_chunked(flash, buf, start, len, max_data); } -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int max_data = spi_programmer->max_data_write; + unsigned int max_data = spi_programmer->max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " @@ -121,9 +121,9 @@ return spi_write_chunked(flash, buf, start, len, max_data); } -int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int addrbase = 0; + unsigned int addrbase = 0; if (!spi_programmer->read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " @@ -160,7 +160,7 @@ * .write_256 = spi_chip_write_1 */ /* real chunksize is up to 256, logical chunksize is 256 */ -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!spi_programmer->write_256) { msg_perr("%s called, but SPI page write is unsupported on this " Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/spi25.c Wed Nov 23 10:13:48 2011 (r1470) @@ -840,7 +840,7 @@ return ret; } -int spi_byte_program(int addr, uint8_t databyte) +int spi_byte_program(unsigned int addr, uint8_t databyte) { int result; struct spi_command cmds[] = { @@ -875,7 +875,7 @@ return result; } -int spi_nbyte_program(int addr, uint8_t *bytes, int len) +int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len) { int result; /* FIXME: Switch to malloc based on len unless that kills speed. */ @@ -950,7 +950,7 @@ return 0; } -int spi_nbyte_read(int address, uint8_t *bytes, int len) +int spi_nbyte_read(unsigned int address, uint8_t *bytes, unsigned int len) { const unsigned char cmd[JEDEC_READ_OUTSIZE] = { JEDEC_READ, @@ -968,12 +968,11 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is read separately in chunks with a maximum size of chunksize. */ -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; - int i, j, starthere, lenhere; - int page_size = flash->page_size; - int toread; + unsigned int i, j, starthere, lenhere, toread; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -1008,17 +1007,16 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is written separately in chunks with a maximum size of chunksize. */ -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; - int i, j, starthere, lenhere; + unsigned int i, j, starthere, lenhere, towrite; /* FIXME: page_size is the wrong variable. We need max_writechunk_size * in struct flashchip to do this properly. All chips using * spi_chip_write_256 have page_size set to max_writechunk_size, so * we're OK for now. */ - int page_size = flash->page_size; - int towrite; + unsigned int page_size = flash->page_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -1057,9 +1055,10 @@ * (e.g. due to size constraints in IT87* for over 512 kB) */ /* real chunksize is 1, logical chunksize is 1 */ -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { - int i, result = 0; + unsigned int i; + int result = 0; for (i = start; i < start + len; i++) { result = spi_byte_program(i, buf[i - start]); @@ -1072,7 +1071,7 @@ return 0; } -int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) +int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { uint32_t pos = start; int result; Modified: trunk/sst28sf040.c ============================================================================== --- trunk/sst28sf040.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/sst28sf040.c Wed Nov 23 10:13:48 2011 (r1470) @@ -76,7 +76,7 @@ } /* chunksize is 1 */ -int write_28sf040(struct flashchip *flash, uint8_t *src, int start, int len) +int write_28sf040(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/sst49lfxxxc.c Wed Nov 23 10:13:48 2011 (r1470) @@ -35,7 +35,7 @@ static int write_lockbits_49lfxxxc(struct flashchip *flash, unsigned char bits) { chipaddr registers = flash->virtual_registers; - int i, left = flash->total_size * 1024; + unsigned int i, left = flash->total_size * 1024; unsigned long address; msg_cdbg("\nbios=0x%08lx\n", registers); Modified: trunk/w39.c ============================================================================== --- trunk/w39.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/w39.c Wed Nov 23 10:13:48 2011 (r1470) @@ -21,7 +21,7 @@ #include "flash.h" -static int printlock_w39_fwh_block(struct flashchip *flash, int offset) +static int printlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -59,7 +59,7 @@ return (locking & ((1 << 2) | (1 << 0))) ? -1 : 0; } -static int unlock_w39_fwh_block(struct flashchip *flash, int offset) +static int unlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -80,7 +80,7 @@ return 0; } -static uint8_t w39_idmode_readb(struct flashchip *flash, int offset) +static uint8_t w39_idmode_readb(struct flashchip *flash, unsigned int offset) { chipaddr bios = flash->virtual_memory; uint8_t val; @@ -127,7 +127,7 @@ return 0; } -static int printlock_w39_common(struct flashchip *flash, int offset) +static int printlock_w39_common(struct flashchip *flash, unsigned int offset) { uint8_t lock; @@ -138,7 +138,7 @@ static int printlock_w39_fwh(struct flashchip *flash) { - int i, total_size = flash->total_size * 1024; + unsigned int i, total_size = flash->total_size * 1024; int ret = 0; /* Print lock status of the complete chip */ @@ -150,7 +150,7 @@ static int unlock_w39_fwh(struct flashchip *flash) { - int i, total_size = flash->total_size * 1024; + unsigned int i, total_size = flash->total_size * 1024; /* Unlock the complete chip */ for (i = 0; i < total_size; i += flash->page_size) Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Sat Nov 19 20:31:17 2011 (r1469) +++ trunk/wbsio_spi.c Wed Nov 23 10:13:48 2011 (r1470) @@ -62,7 +62,7 @@ static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); +static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_wbsio = { .type = SPI_CONTROLLER_WBSIO, @@ -194,7 +194,7 @@ return 0; } -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { return read_memmapped(flash, buf, start, len); }

1 0

Re: [flashrom] flashrom v0.9.4-r1467 + SUPERMICOR X9SCL
by Stefan Tauner 22 Nov '11

22 Nov '11

On Tue, 15 Nov 2011 16:42:20 +0100 "Panny, Martin" <mp(a)rnt.de> wrote: > 0x5C: 0x03ff0030 (FREG2: Management Engine) > 0x00030000-0x003fffff is locked Hello Martin, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] ASUS P5PE-VM
by Stefan Tauner 22 Nov '11

22 Nov '11

On Sat, 19 Nov 2011 12:18:11 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > ASUS P5PE-VM success report. > > http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/ > > Logs attached. > > Marcos Hello Marcos, thanks for your report! I have marked the flash chip (W39V040FC) as fully tested and will commit that later together with other small changes. The mainboard was already known to work (since the board enable was added in r1100). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Asus M3N78-EM: flashrom -V
by anders.arpteg＠gmail.com 22 Nov '11

22 Nov '11

flashrom v0.9.4-r1394 on Linux 3.0.0-13-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1247M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1013 us, 10000 myus = 10045 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M3N78-EM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "NVIDIA MCP78S" with PCI ID 10de:075c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0xfce80000 Mapping NVIDIA MCP6x SPI at 0xfce80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 No operations were specified.

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 19 Nov '11

19 Nov '11

On 11/17/2011 04:24 PM, Svante Olofsson wrote: > Hi, Hello again. Very sorry- today is not my day. Off by one bug. Please change 13 to 12. Thanks, Josh

3 2

[commit] r1469 - trunk
by repository service 19 Nov '11

19 Nov '11

Author: stefanct Date: Sat Nov 19 20:31:17 2011 New Revision: 1469 URL: http://flashrom.org/trac/flashrom/changeset/1469 Log: Add board enable for ASUS A7N8X-VM/400 http://www.flashrom.org/pipermail/flashrom/2011-November/008274.html Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed Nov 16 23:08:11 2011 (r1468) +++ trunk/board_enable.c Sat Nov 19 20:31:17 2011 (r1469) @@ -2008,6 +2008,15 @@ /* * Suited for: + * - ASUS A7N8X-VM/400: NVIDIA nForce2 IGP2 + IT8712F + */ +static int it8712f_gpio12_raise(void) +{ + return it87_gpio_set(12, 1); +} + +/* + * Suited for: * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ @@ -2094,6 +2103,7 @@ {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41GX$", NULL, NULL, P3, "ASRock", "K7S41GX", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, P3, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, P3, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, + {0x10DE, 0x0060, 0x1043, 0x80AD, 0x10DE, 0x01E0, 0x1043, 0x80C0, NULL, NULL, NULL, P3, "ASUS", "A7N8X-VM/400", 0, OK, it8712f_gpio12_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, P3, "ASUS", "A7V600-X", 0, OK, it8712f_gpio31_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, P3, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, P3, "ASUS", "A7V8X", 0, OK, it8703f_gpio51_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Nov 16 23:08:11 2011 (r1468) +++ trunk/print.c Sat Nov 19 20:31:17 2011 (r1469) @@ -571,6 +571,7 @@ B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), + B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), B("ASUS", "A7V400-MX", 1, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL),

1 0

ASUS P5PE-VM
by Marcos Felipe Rasia de Mello 19 Nov '11

19 Nov '11

ASUS P5PE-VM success report. http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/ Logs attached. Marcos

1 0

LiveCD
by Dan King 18 Nov '11

18 Nov '11

I tried to download the live cd and just wanted to let you guys know that only the MegaUpload link works all the rest have been taken down

2 1

Re: [flashrom] [patch] serprog: add proper serprog_map
by Urja Rannikko 18 Nov '11

18 Nov '11

Add serprog_map so that chips are addressed properly. I did this for adding LPC support to my ATmega644 programmer. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ----- That previous one was clearly too verbose, noticed it when I ran this without any -V. I put those messages down one level of verbosity. -- Urja Rannikko

1 0

[patch] serprog: add proper serprog_map
by Urja Rannikko 18 Nov '11

18 Nov '11

Add serprog_map so that chips are addressed properly. I did this for adding LPC support to my ATmega644 programmer. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ------ Sorry if I interrupted you all out of nowhere :P, I was porting LPC code somebody (Mike Stirling, had to look that up) did for the AVR to my ATmega644 (FTDI-USB) programmer, and noticed that it forced a base address of 0xFFF80000 that is right only for 512K chips. I modified the code to only add the highest 8 bits that are not addressable in serprog protocol, and added this map function to have flashrom address stuff properly. This shouldnt affect non-serprog code at all, and it shouldnt matter to parallel, nor it would affect the lpc addr or 0xFFF80000-implementation, also my SPI W25Q80 doesnt mind being addressed in this way at all (detect and read tested). Further testing is recommended. Also sidenote: it might be useful to add an optional write_jedec_1-implementation into serprog. This thing is taking forever to write LPC. (LPC with a 12Mhz AVR isnt that fast anyways, but with USB ping-pong on every byte written...) -- Urja Rannikko

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Svante Olofsson 18 Nov '11

18 Nov '11

Hi Joshua, Thank you very much for the help! I can now verify that the patch works, the bios is updated and the system boots ;) Best regards, --Svante

1 0

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 02:12 PM, Svante Olofsson wrote: > Hi Joshua, > Hello again, Sent the last email a little too quickly. Ignore the 2nd patch in that email also (if you decide to use svn). I tried to fix a non-existent bug! Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 02:12 PM, Svante Olofsson wrote: > Hi Joshua, > > I couldn't get the patch to compile (had also, strangely, to manually > edit one part of the patch) > Hello, Sorry- you'll need to apply that patch to the SVN version of flashrom. My patches depend on a fairly recent change. Alternatively, if you want to avoid checking out the svn copy, change: return it8712f_gpio_set(3, 1); to return it8712f_gpio_set(13, 1); Otherwise, apply these 2 patches to svn (and ignore the previous patch). Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 11:53 AM, Svante Olofsson wrote: > I have attached the information.... > > I guess that I haven't changed the rom at all if the protection is in > place :) The protection must be lifted programatically right? Nothing > can be done with parameters in the bios setup? > > BR, > --Svante > Please try the attached patch and reply with the output from `flashrom -Vw ...' Thanks, Josh

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 11:23 AM, Svante Olofsson wrote: > I tried to write the backup.rom with flashrom -V -w backup.rom and that > seemed to work even if the rom was identical to the one already present. > To me everything looks quite good and I am considering writing the new > rom that I downloaded. What do you thing? Do you still want me to post > any more information with lspci -xxnnvvv, flashrom -V and superiotool > -deV ? > Yes, please send that information. The old version of flashrom failed because of a write protection that is in place on your system. As Stefan mentioned, newer flashrom versions will not write blocks that don't need to be written. See below: > Reading old flash chip contents... done. > Erasing and writing flash chip... Trying erase function 0... > 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, [...] > 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S > Erase/write done. > Verifying flash... VERIFIED. > Restoring PCI config space for 00:01:0 reg 0x6d > Restoring PCI config space for 00:01:0 reg 0x92 > The ":S" after the address ranges indicate that flashrom skipped that section. Thanks, Josh p.s. please use `lspci -vvvnnxxx' (as root) with 3 x's. Thanks.

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Stefan Tauner 17 Nov '11

17 Nov '11

On Thu, 17 Nov 2011 14:58:23 +0200 Svante Olofsson <svante(a)fyraess.com> wrote: > Hi, > > I tried to flash an A7N8X-VM400 board with the current bios (got it with > flashrom -r). The current bios rom was of identical size as the downloaded > newer bios rom. I figured it would be safest to try to flash with the old > one :) hello by "old one" you mean the backed up rom contents i guess? well in newer versions of flashrom this would lead to a complete skipped write because it checks for equal content on the chip before erasing anything ;) what is more of a problem is the *old* version of flashrom you have used, as you have seen... > > The information below is copied from the terminal: > > svante@stereo:~$ sudo flashrom -wV current_A7NVM400-ASUS.080009.rom > flashrom v0.9.1-r946 > […] > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... Looking at blockwise erase > function 0... trying... 0x000000-0x000fff, ERASE FAILED at 0x00000008! > Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x00000fff: > 0xfdc > ERASE FAILED! > > Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, ERASE > FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x0000ffff: 0xfed5 > ERASE FAILED! > > Looking at blockwise erase function 2... trying... 0x000000-0x07ffff, ERASE > FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x0007ffff: 0x687be > ERASE FAILED! this looks like a complete write protection, which is quite common... see http://flashrom.org/Board_Enable for details. > > what do you think, am I screwed? not at all, but we will probably need to add some code to enable writing on your board. first of all please get a current version of flashrom from subversion and compile it. http://flashrom.org/Downloads then verify that the rom content is still the same as the backed up image (e.g. flashrom -v backup.rom). then reply with the logs of the following commands (run as root) attached/embedded: lspci -xxnnvvv flashrom -V if possible also superiotool -deV you can of course also try to reverse engineer the needed code yourself as described here: http://flashrom.org/Finding_Board_Enable_by_Reverse_Engineering if you wait for us to do it it can take its time... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] Asus A7NVM400 (A7NX8-VM400)
by Joshua Roys 17 Nov '11

17 Nov '11

On 11/17/2011 07:58 AM, Svante Olofsson wrote: > Hi, > > I tried to flash an A7N8X-VM400 board with the current bios (got it with > flashrom -r). The current bios rom was of identical size as the > downloaded newer bios rom. I figured it would be safest to try to flash > with the old one :) > > The information below is copied from the terminal: > > svante@stereo:~$ sudo flashrom -wV current_A7NVM400-ASUS.080009.rom > flashrom v0.9.1-r946 This is a very old version of flashrom. Can you please download and try the latest? Then try writing the original rom back with the newer flashrom. This may restore the bits that were written by the old flashrom. It is likely that you will need a "board enable" in order to write to your entire chip. Please reply with the output of `lspci -vvvnnxxx' and `superiotool -deV' both as root. Oh, and the output of the newer `flashrom -V' . Thanks, Josh

1 0

Asus A7NVM400 (A7NX8-VM400)
by Svante Olofsson 17 Nov '11

17 Nov '11

Hi, I tried to flash an A7N8X-VM400 board with the current bios (got it with flashrom -r). The current bios rom was of identical size as the downloaded newer bios rom. I figured it would be safest to try to flash with the old one :) The information below is copied from the terminal: svante@stereo:~$ sudo flashrom -wV current_A7NVM400-ASUS.080009.rom flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Ssystem manufacturer" DMI string system-product-name: "System product name" DMI string system-version: "System version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "A7NVM400" DMI string baseboard-version: "Rev 2.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8712 Found chipset "NVIDIA NForce2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 567M loops per second, 100 myus = 202 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x3f, id2 0xae, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x65, id2 0xd0 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ERASE FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x00000fff: 0xfdc ERASE FAILED! Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, ERASE FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0000ffff: 0xfed5 ERASE FAILED! Looking at blockwise erase function 2... trying... 0x000000-0x07ffff, ERASE FAILED at 0x00000008! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0007ffff: 0x687be ERASE FAILED! Looking at blockwise erase function 3... not defined. Looking for another erase function. Looking at blockwise erase function 4... not defined. Looking for another erase function. FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! what do you think, am I screwed? Best regards, --Svante

1 0

ASRock ConRoeXFire-eSATA2 board support
by PaulK 16 Nov '11

16 Nov '11

Hi! I'm new to this list so I'll start by introducing myself a bit: I'm a french student involved in free software: I use GNU/Linux distros on all my PCs, mostly with the fully free Trisquel distro and I'm also a developer (I know C quite well) mostly involved in the Replicant project (fully free Android derivate) as a hacker (lower-level stuff). The lead dev on the project (GNUtoo) decided to look at how doable it is to port his board to coreboot, so I decided to follow his lead and look at which of the motherboards I own would be the best one for coreboot. I have 2 boards that might be good candidates, ASRock ConRoeXFire-eSATA2 (which has a socketed PLCC32 chip) and Asus P5LP-LE (Lithium) with a soldered PLCC32 chip. Both boards have supported North/Southbridge and SuperIO already supported in coreboot. I decided to start the work on the ASRock ConRoeXFire-eSATA2 one and got a few needed things from the local electronics shop. Then I started to run flashrom on it. So far, I've been able to read the content of the PLCC chip with flashrom (http://download.paulk.fr/coreboot/conroe-xfire-esata2.bin) but it failed at write. All the logs and necessary informations should be attached to this mail. What are the next steps for me to have working write on flashrom with that board? -- Paul Kocialkowski * Website : http://www.paulk.fr/ * Blog : http://blog.paulk.fr/ * Microblogging : http://status.paulk.fr/

2 2

[commit] r1468 - trunk
by repository service 16 Nov '11

16 Nov '11

Author: stefanct Date: Wed Nov 16 23:08:11 2011 New Revision: 1468 URL: http://flashrom.org/trac/flashrom/changeset/1468 Log: Add board enable for ASRock ConRoeXFire-eSATA2 The reverse engineering was done by Joshua. The actual patch was fabricated by Paul with some polishing by Stefan. Success log: http://www.flashrom.org/pipermail/flashrom/2011-November/008257.html Signed-off-by: Joshua Roys <roysjosh at gmail.com> Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Nov 15 09:08:15 2011 (r1467) +++ trunk/board_enable.c Wed Nov 16 23:08:11 2011 (r1468) @@ -2089,6 +2089,7 @@ {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", P3, "Artec Group", "DBE61", 0, OK, board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", P3, "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, {0x8086, 0x277c, 0xa0a0, 0x060b, 0x8086, 0x27da, 0xa0a0, 0x060b, NULL, NULL, NULL, P3, "AOpen", "i975Xa-YDG", 0, OK, board_aopen_i975xa_ydg}, + {0x8086, 0x27b8, 0x1849, 0x27b8, 0x8086, 0x27da, 0x1849, 0x27da, "^ConRoeXFire-eSATA2", NULL, NULL, P3, "ASRock", "ConRoeXFire-eSATA2", 0, OK, intel_ich_gpio16_raise}, {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41 $", NULL, NULL, P3, "ASRock", "K7S41", 0, OK, w836xx_memw_enable_2e}, {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41GX$", NULL, NULL, P3, "ASRock", "K7S41GX", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, P3, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Nov 15 09:08:15 2011 (r1467) +++ trunk/print.c Wed Nov 16 23:08:11 2011 (r1468) @@ -562,6 +562,7 @@ B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), + B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),

1 0

Question about the EC code
by Marcos Felipe Rasia de Mello 16 Nov '11

16 Nov '11

Hi flashrom people, Reading the wiki, I understood the basics about the laptops ECs. A friend brought to me a bricked Clevo M540SE/M550SE (main board "6-71-M5E50-D02A") after an unsuccessful BIOS upgrade. He used these two files: ftp://usftp.clevo.com.tw/ALLBIOS/M5xxSE/M5xSE_H805.zip ftp://usftp.clevo.com.tw/ALLBIOS/M5xxSE/M5xSE_13.zip (he found the files in this forum: http://forum.notebookreview.com/sager-clevo/416916-clevo-bios-thread-55.html ) The first file is the "EC update", which need to be updated before que second one, the BIOS itself. What I do not understand is why the EC code is separated. According to what I understand, the EC code is part of BIOS image and the update utility needs some voodoo work to put the EC in a "loop", update the flash chip and then put the EC into operation again. It is an old laptop, with a soldered PLCC-32 chip (I do not remember the exact model now, but it is a plain SST 512KB LPC chip). If I put a socket in the laptop and program the chip with the WPH file (second link) via hot swap using a desktop board (same flash voltage, bus) will it work? Marcos

1 0

flashrom v0.9.4-r1467 + SUPERMICOR X9SCL
by Panny, Martin 15 Nov '11

15 Nov '11

hi, just a report, flashrom does not work with SUPEMRICRO X9SCL, errors while trying to backup bios with "flashrom -r out.rom": "Transaction error! Read operation failed!" logs attached. thank you regards martin panny

1 0

flashrom tested on alix2d3 board
by Gerd Pauli 15 Nov '11

15 Nov '11

Hello, i just got the flashrom utility from svn. Development System was voyage-0.8.0 Linux http://linux.voyage.hk/ ( Debian based ) After compiling and reading the bios, i tested writing and it worked. Great Job Guys :-) Here are the information needed. ---------------------------- Hardware: PC Engines Alix.2d3 Board http://pcengines.ch/alix2d3.htm ---------------------------- flashrom -V flashrom v0.9.4-r1465 on Linux 3.0.0-voyage (i586), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 14 usecs, 160M loops per second, 10 myus = 21 us, 100 myus = 108 us, 1000 myus = 1097 us, 10000 myus = 10101 us, 56 myus = 65 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: not found dmidecode execution unsuccessful - continuing without DMI info Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... OK. WARNING: unexpected second chipset match: "AMD CS5536" ignoring, please report lspci and board URL to flashrom(a)flashrom.org with 'CHIPSET: your board name' in the subject line. This programmer supports the following protocols: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Found AMIC flash chip "A49LF040A" (512 kB, LPC) at physical address 0xfff80000. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00 Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00 Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00 Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00 Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Found AMIC flash chip "A49LF040A" (512 kB, LPC). === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. --------------------- flashrom -Vr Reading flash... done. --------------------- flashrom -VE Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:E, 0x010000-0x01ffff:E, 0x020000-0x02ffff:E, 0x030000-0x03ffff:E, 0x040000-0x04ffff:E, 0x050000-0x05ffff:E, 0x060000-0x06ffff:E, 0x070000-0x07ffff:E Erase/write done. --------------------- flashrom -Vw flashrom v0.9.4-r1465 on Linux 3.0.0-voyage (i586), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 13 usecs, 160M loops per second, 10 myus = 21 us, 100 myus = 108 us, 1000 myus = 1019 us, 10000 myus = 10214 us, 52 myus = 62 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: not found dmidecode execution unsuccessful - continuing without DMI info Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... OK. WARNING: unexpected second chipset match: "AMD CS5536" ignoring, please report lspci and board URL to flashrom(a)flashrom.org with 'CHIPSET: your board name' in the subject line. This programmer supports the following protocols: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Found AMIC flash chip "A49LF040A" (512 kB, LPC) at physical address 0xfff80000. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x37, id2 0x9d Found AMIC flash chip "A49LF040A" (512 kB, LPC). === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:W, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:W, 0x070000-0x07ffff:W Erase/write done. Verifying flash... VERIFIED. --------------------- lspci -nnvvxxx 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: I/O ports at ac1c [size=4] 00: 22 10 80 20 05 00 20 02 33 00 00 06 08 f8 80 00 10: 1d ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 80 20 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: Geode LX AES 00: 22 10 82 20 06 00 a0 02 00 00 10 10 08 00 00 00 10: 00 40 ff ef 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 82 20 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine 00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00 10: 01 10 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 08 40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine 00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00 10: 01 14 00 00 00 00 04 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 08 40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine 00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00 10: 01 18 00 00 00 00 08 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 08 40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 6000 [size=8] Region 1: I/O ports at 6100 [size=256] Region 2: I/O ports at 6200 [size=64] Region 3: I/O ports at <unassigned> Region 4: I/O ports at 9d00 [size=128] Region 5: I/O ports at 9c00 [size=64] Kernel driver in use: cs5535-mfd 00: 22 10 90 20 09 00 a0 02 03 00 01 06 08 40 80 00 10: 01 60 00 00 01 61 00 00 01 62 00 00 01 00 00 00 20: 01 9d 00 00 01 9c 00 00 00 00 00 00 22 10 90 20 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: AMD_IDE 00: 22 10 9a 20 05 00 a0 02 01 80 01 01 08 f8 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 22 10 9a 20 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 02 f0 00 00 00 00 00 00 00 00 98 33 00 00 00 91 50: 00 00 03 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 12 Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: 22 10 94 20 06 00 30 02 02 10 03 0c 08 00 00 00 10: 00 e0 ff ef 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 94 20 30: 00 00 00 00 40 00 00 00 00 00 00 00 0c 04 00 00 40: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 12 Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: 22 10 95 20 06 00 30 02 02 20 03 0c 08 00 00 00 10: 00 d0 ff ef 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 95 20 30: 00 00 00 00 40 00 00 00 00 00 00 00 0c 04 00 00 40: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --------------------------- superiotool -deV superiotool r5050 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. No Super I/O found Best Regards Gerd Pauli HighConsulting GmbH & Co.KG Tel: +49 821/450788 - 14 Werner-von-Siemens-Str. 6 Fax: +49 821/450788 - 24 86159 Augsburg mobile: +49 172/8150144 http://www.high-consulting.de email: gp(a)high-consulting.de Geschäftsführer: Gerd Pauli, Dr. Walter Hafner Amtsgericht Augsburg, HRA 16021 USt-ID: DE256906131 Persönlich haftende Gesellschafterin: HighConsulting Management GmbH Amtsgericht Augsburg, HRB 22745 Zur Überprüfung der verwendeten Signatur laden Sie bitte die Wurzelzertifikate von http://www.cacert.org Diese e-mail (incl. ggf. vorhandener Anlagen) enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese e-mail irrtümlich erhalten haben, informieren Sie bitte den Absender und vernichten Sie diese e-mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail – auch in Teilen - ist nicht gestattet. To verify the used signature please install Root-Certificate from http://www.cacert.org This message (including any attachments) is confidential and may be privileged. It is intended for use by the addressee only. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited.

2 1

Re: [flashrom] [PATCH] Add board enable for ASUS P4GV-LA (Guppy)
by Carl-Daniel Hailfinger 15 Nov '11

15 Nov '11

Am 14.11.2011 20:23 schrieb Stefan Tauner: > The Reverse engineering was done by Joshua. The actual patch was > fabricated by Stefan. > Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1467 - trunk
by repository service 15 Nov '11

15 Nov '11

Author: stefanct Date: Tue Nov 15 09:08:15 2011 New Revision: 1467 URL: http://flashrom.org/trac/flashrom/changeset/1467 Log: Add board enable for ASUS P4GV-LA (Guppy) The reverse engineering was done by Joshua. The actual patch was fabricated by Stefan. Request: http://www.flashrom.org/pipermail/flashrom/2011-November/008241.html Success report: http://paste.flashrom.org/view.php?id=914 Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Mugendai <mugendai42(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Nov 14 14:00:12 2011 (r1466) +++ trunk/board_enable.c Tue Nov 15 09:08:15 2011 (r1467) @@ -2111,6 +2111,7 @@ {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, P3, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, P3, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, P3, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, + {0x8086, 0x2560, 0x103C, 0x2A00, 0x8086, 0x24C3, 0x103C, 0x2A01, "^Guppy", NULL, NULL, P3, "ASUS", "P4GV-LA (Guppy)", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, P3, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, P3, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D3, 0x1043, 0x80A6, "^P4P800-E$", NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Nov 14 14:00:12 2011 (r1466) +++ trunk/print.c Tue Nov 15 09:08:15 2011 (r1467) @@ -635,6 +635,7 @@ B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), + B("ASUS", "P4GV-LA (Guppy)", 1, NULL, NULL), B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), B("ASUS", "P4P800-VM", 1, NULL, NULL),

1 0

[PATCH] Add board enable for ASUS P4GV-LA (Guppy)
by Stefan Tauner 14 Nov '11

14 Nov '11

The Reverse engineering was done by Joshua. The actual patch was fabricated by Stefan. Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- board_enable.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index 1173b9c..7ef3db4 100644 --- a/board_enable.c +++ b/board_enable.c @@ -2111,6 +2111,7 @@ const struct board_match board_matches[] = { {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, P3, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, P3, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, P3, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, + {0x8086, 0x2560, 0x103C, 0x2A00, 0x8086, 0x24C3, 0x103C, 0x2A01, "^Guppy", NULL, NULL, P3, "ASUS", "P4GV-LA (Guppy)", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, P3, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, P3, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D3, 0x1043, 0x80A6, "^P4P800-E$", NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, -- 1.7.1

1 0

Re: [flashrom] [PATCH] board_enable: Make it8712f_gpio_set generic
by Stefan Tauner 14 Nov '11

14 Nov '11

On Tue, 23 Aug 2011 14:35:36 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > This looks suspiciously like intel_ich_gpio_set. > > Based on that, add board enables for the ASUS P5N-D and P5N-E SLI. > This was tested by Guillaume Poirier-Morency on a P5N-D: > http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html > > Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> > Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > i have made a few changes: > - renamed functions to our usual scheme > - marked the P5E (board enable) as not tested > - use a pointer to the config entry to access it instead of its index > > the latter together with the goto makes the execution flow more obvious imho. > > if anyone asks this is of course also > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > but i don't deserve it imo. as discussed on IRC i have committed this in r1466 with a few further modifications (better and earlier input validation). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1466 - trunk
by repository service 14 Nov '11

14 Nov '11

Author: stefanct Date: Mon Nov 14 14:00:12 2011 New Revision: 1466 URL: http://flashrom.org/trac/flashrom/changeset/1466 Log: board_enable.c: Make it8712f_gpio_set generic This looks suspiciously like intel_ich_gpio_set. Based on that, add board enables for the ASUS P5N-D and P5N-E SLI. This was tested by Guillaume Poirier-Morency on a P5N-D: http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Small changes were also contributed and Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Nov 14 00:03:30 2011 (r1465) +++ trunk/board_enable.c Mon Nov 14 14:00:12 2011 (r1466) @@ -1917,54 +1917,90 @@ } /* - * General routine for raising/dropping GPIO lines on the ITE IT8712F. - * There is only some limited checking on the port numbers. + * General routine for raising/dropping GPIO lines on the ITE IT87xx. */ -static int it8712f_gpio_set(unsigned int line, int raise) +static int it87_gpio_set(unsigned int gpio, int raise) { + int allowed, sio; unsigned int port; - uint16_t id, base; + uint16_t base, sioport; uint8_t tmp; - port = line / 10; - port--; - line %= 10; - - /* Check line */ - if ((port > 4) || /* also catches unsigned -1 */ - ((port < 4) && (line > 7)) || ((port == 4) && (line > 5))) { - msg_perr("\nERROR: Unsupported IT8712F GPIO line %02d.\n", line); + /* IT87 GPIO configuration table */ + static const struct it87cfg { + uint16_t id; + uint8_t base_reg; + uint32_t bank0; + uint32_t bank1; + uint32_t bank2; + } it87_gpio_table[] = { + {0x8712, 0x62, 0xCFF3FC00, 0x00FCFF3F, 0}, + {0x8718, 0x62, 0xCFF37C00, 0xF3FCDF3F, 0x0000000F}, + {0, 0, 0, 0, 0} /* end marker */ + }; + const struct it87cfg *cfg = NULL; + + /* Find the Super I/O in the probed list */ + for (sio = 0; sio < superio_count; sio++) { + int i; + if (superios[sio].vendor != SUPERIO_VENDOR_ITE) + continue; + + /* Is this device in our list? */ + for (i = 0; it87_gpio_table[i].id; i++) + if (superios[sio].model == it87_gpio_table[i].id) { + cfg = &it87_gpio_table[i]; + goto found; + } + } + + if (cfg == NULL) { + msg_perr("\nERROR: No IT87 Super I/O GPIO configuration " + "found.\n"); return -1; } - /* Find the IT8712F. */ - enter_conf_mode_ite(0x2E); - id = (sio_read(0x2E, 0x20) << 8) | sio_read(0x2E, 0x21); - exit_conf_mode_ite(0x2E); +found: + /* Check whether the gpio is allowed. */ + if (gpio < 32) + allowed = (cfg->bank0 >> gpio) & 0x01; + else if (gpio < 64) + allowed = (cfg->bank1 >> (gpio - 32)) & 0x01; + else if (gpio < 96) + allowed = (cfg->bank2 >> (gpio - 64)) & 0x01; + else + allowed = 0; - if (id != 0x8712) { - msg_perr("\nERROR: IT8712F Super I/O not found.\n"); + if (!allowed) { + msg_perr("\nERROR: IT%02X does not allow setting GPIO%02u.\n", + cfg->id, gpio); return -1; } - /* Get the GPIO base */ - enter_conf_mode_ite(0x2E); - sio_write(0x2E, 0x07, 0x07); - base = (sio_read(0x2E, 0x62) << 8) | sio_read(0x2E, 0x63); - exit_conf_mode_ite(0x2E); + /* Read the Simple I/O Base Address Register */ + sioport = superios[sio].port; + enter_conf_mode_ite(sioport); + sio_write(sioport, 0x07, 0x07); + base = (sio_read(sioport, cfg->base_reg) << 8) | + sio_read(sioport, cfg->base_reg + 1); + exit_conf_mode_ite(sioport); if (!base) { - msg_perr("\nERROR: Failed to read IT8712F Super I/O GPIO" - " Base.\n"); + msg_perr("\nERROR: Failed to read IT87 Super I/O GPIO Base.\n"); return -1; } - /* Set GPIO. */ + msg_pdbg("Using IT87 GPIO base 0x%04x\n", base); + + port = gpio / 10 - 1; + gpio %= 10; + + /* set GPIO. */ tmp = INB(base + port); if (raise) - tmp |= 1 << line; + tmp |= 1 << gpio; else - tmp &= ~(1 << line); + tmp &= ~(1 << gpio); OUTB(tmp, base + port); return 0; @@ -1975,9 +2011,19 @@ * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ -static int it8712f_gpio3_1_raise(void) +static int it8712f_gpio31_raise(void) +{ + return it87_gpio_set(32, 1); +} + +/* + * Suited for: + * - ASUS P5N-D: NVIDIA MCP51 + IT8718F + * - ASUS P5N-E SLI: NVIDIA MCP51 + IT8718F + */ +static int it8718f_gpio63_raise(void) { - return it8712f_gpio_set(32, 1); + return it87_gpio_set(63, 1); } #endif @@ -2047,11 +2093,11 @@ {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41GX$", NULL, NULL, P3, "ASRock", "K7S41GX", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, P3, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, P3, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, - {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, P3, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, + {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, P3, "ASUS", "A7V600-X", 0, OK, it8712f_gpio31_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, P3, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, P3, "ASUS", "A7V8X", 0, OK, it8703f_gpio51_raise}, {0x1106, 0x3099, 0x1043, 0x807F, 0x1106, 0x3147, 0x1043, 0x808C, NULL, NULL, NULL, P3, "ASUS", "A7V333", 0, OK, it8703f_gpio51_raise}, - {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, P3, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, + {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, P3, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio31_raise}, {0x1002, 0x4372, 0x103c, 0x2a26, 0x1002, 0x4377, 0x103c, 0x2a26, NULL, NULL, NULL, P3, "ASUS", "A8AE-LE", 0, OK, amd_sbxxx_gpio9_raise}, {0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, P3, "ASUS", "A8Jm", 0, NT, intel_ich_gpio34_raise}, {0x10DE, 0x0260, 0x103C, 0x2A34, 0x10DE, 0x0264, 0x103C, 0x2A34, "NODUSM3", NULL, NULL, P3, "ASUS", "A8M2N-LA (NodusM3-GL8E)", 0, OK, nvidia_mcp_gpio0_raise}, @@ -2084,6 +2130,8 @@ {0x8086, 0x27b8, 0x1043, 0x2a22, 0x8086, 0x2770, 0x1043, 0x2a22, "^P5LP-LE$", NULL, NULL, P3, "ASUS", "P5LP-LE (Epson OEM)", 0, OK, intel_ich_gpio34_raise}, {0x8086, 0x27da, 0x1043, 0x8179, 0x8086, 0x27b8, 0x1043, 0x8179, "^P5LD2$", NULL, NULL, P3, "ASUS", "P5LD2", 0, NT, intel_ich_gpio16_raise}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, P3, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, + {0x10DE, 0x0260, 0x1043, 0x81BC, 0x10DE, 0x026C, 0x1043, 0x829E, "^P5N-D$", NULL, NULL, P3, "ASUS", "P5N-D", 0, OK, it8718f_gpio63_raise}, + {0x10DE, 0x0260, 0x1043, 0x81BC, 0x10DE, 0x026C, 0x1043, 0x8249, "^P5N-E SLI$",NULL, NULL, P3, "ASUS", "P5N-E SLI", 0, NT, it8718f_gpio63_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, P3, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Mon Nov 14 00:03:30 2011 (r1465) +++ trunk/print.c Mon Nov 14 14:00:12 2011 (r1466) @@ -661,6 +661,8 @@ B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), + B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), + B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), B("ASUS", "P5PE-VM", 1, "http://www.asus.com/product.aspx?P_ID=k3h0ZFVu9Lo1dUvk", NULL),

1 0

ASUS P4GV-LA (Guppy) (Resend; fixing link error)
by Mugendai 14 Nov '11

14 Nov '11

I accidentally mislinked for the superiotool in the last e-mail. Sorry about that. lspci: http://paste.flashrom.org/view.php?id=910 superiotool: http://paste.flashrom.org/view.php?id=911 flashrom: http://paste.flashrom.org/view.php?id=912 readout.rom: http://paste.flashrom.org/view.php?id=913 This is on the latest git revision. I am unable to erase the flash chip. Here is the error (with -V) outputted when I try to: http://paste.flashrom.org/view.php?id=909 This is from a hot flashing operation in order to attempt to recover from a bad BIOS update for another computer; the original chip was PMC Pm49FL004. The SST49LF004A/B was from a FIC K8MC51G mainboard.

1 0

ASUS P4GV-LA (Guppy)
by Mugendai 14 Nov '11

14 Nov '11

lspci: http://paste.flashrom.org/view.php?id=910 superiotool: http://paste.flashrom.org/view.php?id=912 flashrom: http://paste.flashrom.org/view.php?id=912 readout.rom: http://paste.flashrom.org/view.php?id=913 This is on the latest git revision. I am unable to erase the flash chip. Here is the error (with -V) outputted when I try to: http://paste.flashrom.org/view.php?id=909 This is from a hot flashing operation in order to attempt to recover from a bad BIOS update for another computer; the original chip was PMC Pm49FL004. The SST49LF004A/B was from a FIC K8MC51G mainboard.

1 0

Re: [flashrom] [PATCH] Create a directory for documentation files
by Carl-Daniel Hailfinger 14 Nov '11

14 Nov '11

Am 18.09.2011 02:31 schrieb Stefan Tauner: > Move the serprog specification there and document a few things we could not > figure out on intel platforms yet. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1465 - in trunk: . Documentation
by repository service 14 Nov '11

14 Nov '11

Author: stefanct Date: Mon Nov 14 00:03:30 2011 New Revision: 1465 URL: http://flashrom.org/trac/flashrom/changeset/1465 Log: Create a directory for documentation files Move the serprog specification there and document a few things we could not figure out on intel platforms yet. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Added: trunk/Documentation/ trunk/Documentation/mysteries_intel.txt (contents, props changed) trunk/Documentation/serprog-protocol.txt (contents, props changed) - copied, changed from r1464, trunk/serprog-protocol.txt Deleted: trunk/serprog-protocol.txt Added: trunk/Documentation/mysteries_intel.txt ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/Documentation/mysteries_intel.txt Mon Nov 14 00:03:30 2011 (r1465) @@ -0,0 +1,18 @@ += BBAR on ICH8 = + There is no sign of BBAR (BIOS Base Address Configuration Register) in the + public datasheet (or specification update) of the ICH8. Also, the offset of + that register has changed between ICH7 (SPIBAR + 50h) and ICH9 (SPIBAR + + A0h), so we have no clue if or where it is on ICH8. Out current policy is to + not touch it at all and assume/hope it is 0. + += Accesses beyond region bounds in descriptor mode = + Intel's flash image tool will always expand the last region so that it covers + the whole flash chip, but some boards ship with a different configuration. + It seems that in descriptor mode all addresses outside the used regions can not + be accessed whatsoever. This is not specified anywhere publicly as far as we + could tell. flashrom does not handle this explicitly yet. It will just fail + when trying to touch an address outside of any region. + See also http://www.flashrom.org/pipermail/flashrom/2011-August/007606.html + += Unlocking the ME region = +TODO Copied and modified: trunk/Documentation/serprog-protocol.txt (from r1464, trunk/serprog-protocol.txt) ==============================================================================

1 0

[patch] move ich_init_opcodes() call back to where it was before r1461
by Jonathan A. Kollasch 13 Nov '11

13 Nov '11

ich_init_opcodes() needs to be called after ichspi_lock is set. Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net>

3 3

[commit] r1464 - trunk
by repository service 13 Nov '11

13 Nov '11

Author: stefanct Date: Sun Nov 13 16:17:10 2011 New Revision: 1464 URL: http://flashrom.org/trac/flashrom/changeset/1464 Log: ichspi: fix ich_init_opcodes() calls in ich_init_spi() By calling it early ichspi_lock was not set up correctly in accordance with the corresponding register, hence ich_init_opcodes() was always trying to programming the opcodes instead of reading them in from the opmenu in case of a locked down configuration. Thanks to Jonathan A. Kollasch for reporting this bug. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ichspi.c Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Nov 10 00:40:00 2011 (r1463) +++ trunk/ichspi.c Sun Nov 13 16:17:10 2011 (r1464) @@ -1562,8 +1562,6 @@ /* Assign Virtual Address */ ich_spibar = rcrb + spibar_offset; - ich_init_opcodes(); - switch (ich_generation) { case CHIPSET_ICH7: msg_pdbg("0x00: 0x%04x (SPIS)\n", @@ -1601,6 +1599,7 @@ msg_pinfo("WARNING: SPI Configuration Lockdown activated.\n"); ichspi_lock = 1; } + ich_init_opcodes(); ich_set_bbar(0); register_spi_programmer(&spi_programmer_ich7); break; @@ -1643,6 +1642,7 @@ "by the FRAP and FREG registers are NOT in " "effect. Please note that Protected\n" "Range (PR) restrictions still apply.\n"); + ich_init_opcodes(); if (desc_valid) { tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFC);

1 0

[PATCH] generic programmer registration
by Carl-Daniel Hailfinger 12 Nov '11

12 Nov '11

Please note that this patch breaks every programmer except hwseq because we're not passing struct flashchip around yet. To get this working, the following changes have to be made: - Pass struct flashchip * everywhere (or struct flashctx *), see my other patch for that - Change parallel-style and SPI programmers to use flash->pgm... instead of par_programmer->... and spi_programmer->... This compiles and should help you review it, but it is not for merge until the "struct flashchip * everywhere" patch is in. Some code has been removed with #if 0 because I wanted to discuss removing it. The final patch will have no #if 0 at all. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-register_all_programmers_register_generic/flash.h =================================================================== --- flashrom-register_all_programmers_register_generic/flash.h (Revision 1463) +++ flashrom-register_all_programmers_register_generic/flash.h (Arbeitskopie) @@ -153,6 +153,7 @@ /* Some flash devices have an additional register space. */ chipaddr virtual_memory; chipaddr virtual_registers; + struct registered_programmer *pgm; }; #define TEST_UNTESTED 0 @@ -197,14 +198,13 @@ write_gran_1byte, write_gran_256bytes, }; -extern enum chipbustype buses_supported; extern int verbose; extern const char flashrom_version[]; extern char *chip_to_probe; void map_flash_registers(struct flashchip *flash); int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); int erase_flash(struct flashchip *flash); -int probe_flash(int startchip, struct flashchip *fill_flash, int force); +int probe_flash(struct registered_programmer *pgm, int startchip, struct flashchip *fill_flash, int force); int read_flash_to_file(struct flashchip *flash, const char *filename); int min(int a, int b); int max(int a, int b); @@ -271,4 +271,5 @@ int spi_send_multicommand(struct spi_command *cmds); uint32_t spi_get_valid_read_addr(void); +enum chipbustype get_buses_supported(void); #endif /* !__FLASH_H__ */ Index: flashrom-register_all_programmers_register_generic/cli_classic.c =================================================================== --- flashrom-register_all_programmers_register_generic/cli_classic.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/cli_classic.c (Arbeitskopie) @@ -172,7 +172,7 @@ struct flashchip flashes[3]; struct flashchip *fill_flash; const char *name; - int namelen, opt, i; + int namelen, opt, i, j; int startchip = 0, chipcount = 0, option_index = 0, force = 0; #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; @@ -443,17 +443,21 @@ ret = 1; goto out_shutdown; } - tempstr = flashbuses_to_text(buses_supported); + tempstr = flashbuses_to_text(get_buses_supported()); msg_pdbg("This programmer supports the following protocols: %s.\n", tempstr); free(tempstr); - for (i = 0; i < ARRAY_SIZE(flashes); i++) { - startchip = probe_flash(startchip, &flashes[i], 0); - if (startchip == -1) - break; - chipcount++; - startchip++; + for (j = 0; j < registered_programmer_count; j++) { + startchip = 0; + for (i = 0; i < ARRAY_SIZE(flashes); i++) { + startchip = probe_flash(&registered_programmers[j], + startchip, &flashes[i], 0); + if (startchip == -1) + break; + chipcount++; + startchip++; + } } if (chipcount > 1) { @@ -471,6 +475,7 @@ printf("Note: flashrom can never write if the flash " "chip isn't found automatically.\n"); } +#if 0 // FIXME: What happens for a forced chip read if multiple compatible programmers are registered? if (force && read_it && chip_to_probe) { printf("Force read (-f -r -c) requested, pretending " "the chip is there:\n"); @@ -485,6 +490,7 @@ "contain garbage.\n"); return read_flash_to_file(&flashes[0], filename); } +#endif ret = 1; goto out_shutdown; } else if (!chip_to_probe) { @@ -501,7 +507,7 @@ check_chip_supported(fill_flash); size = fill_flash->total_size * 1024; - if (check_max_decode((buses_supported & fill_flash->bustype), size) && + if (check_max_decode((get_buses_supported() & fill_flash->bustype), size) && (!force)) { fprintf(stderr, "Chip is too big for this programmer " "(-V gives details). Use --force to override.\n"); Index: flashrom-register_all_programmers_register_generic/ichspi.c =================================================================== --- flashrom-register_all_programmers_register_generic/ichspi.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/ichspi.c (Arbeitskopie) @@ -1295,7 +1295,7 @@ REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS)); while (len > 0) { - block_len = min(len, opaque_programmer->max_data_read); + block_len = min(len, flash->pgm->opaque.max_data_read); ich_hwseq_set_addr(addr); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* set read operation */ @@ -1333,7 +1333,7 @@ while (len > 0) { ich_hwseq_set_addr(addr); - block_len = min(len, opaque_programmer->max_data_write); + block_len = min(len, flash->pgm->opaque.max_data_write); ich_fill_data(buf, block_len, ICH9_REG_FDATA0); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* clear operation */ Index: flashrom-register_all_programmers_register_generic/opaque.c =================================================================== --- flashrom-register_all_programmers_register_generic/opaque.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/opaque.c (Arbeitskopie) @@ -30,70 +30,62 @@ #include "chipdrivers.h" #include "programmer.h" -const struct opaque_programmer opaque_programmer_none = { - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .probe = NULL, - .read = NULL, - .write = NULL, - .erase = NULL, -}; - -const struct opaque_programmer *opaque_programmer = &opaque_programmer_none; - int probe_opaque(struct flashchip *flash) { - if (!opaque_programmer->probe) { + if (!flash->pgm->opaque.probe) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 0; } - return opaque_programmer->probe(flash); + return flash->pgm->opaque.probe(flash); } int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) { - if (!opaque_programmer->read) { + if (!flash->pgm->opaque.read) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->read(flash, buf, start, len); + return flash->pgm->opaque.read(flash, buf, start, len); } int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) { - if (!opaque_programmer->write) { + if (!flash->pgm->opaque.write) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->write(flash, buf, start, len); + return flash->pgm->opaque.write(flash, buf, start, len); } int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen) { - if (!opaque_programmer->erase) { + if (!flash->pgm->opaque.erase) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->erase(flash, blockaddr, blocklen); + return flash->pgm->opaque.erase(flash, blockaddr, blocklen); } void register_opaque_programmer(const struct opaque_programmer *pgm) { + struct registered_programmer rpgm; + if (!pgm->probe || !pgm->read || !pgm->write || !pgm->erase) { msg_perr("%s called with one of probe/read/write/erase being " "NULL. Please report a bug at flashrom(a)flashrom.org\n", __func__); return; } - opaque_programmer = pgm; - buses_supported |= BUS_PROG; + rpgm.buses_supported = BUS_PROG; + rpgm.opaque = *pgm; + register_programmer(&rpgm); } Index: flashrom-register_all_programmers_register_generic/spi.c =================================================================== --- flashrom-register_all_programmers_register_generic/spi.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/spi.c (Arbeitskopie) @@ -194,6 +194,9 @@ void register_spi_programmer(const struct spi_programmer *pgm) { - spi_programmer = pgm; - buses_supported |= BUS_SPI; + struct registered_programmer rpgm; + + rpgm.buses_supported = BUS_SPI; + rpgm.spi = *pgm; + register_programmer(&rpgm); } Index: flashrom-register_all_programmers_register_generic/programmer.c =================================================================== --- flashrom-register_all_programmers_register_generic/programmer.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/programmer.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009,2010 Carl-Daniel Hailfinger + * Copyright (C) 2009,2010,2011 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -113,6 +113,38 @@ void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses) { - par_programmer = pgm; - buses_supported |= buses; + struct registered_programmer rpgm; + + rpgm.buses_supported = buses; + rpgm.par = *pgm; + register_programmer(&rpgm); } + +/* The limit of 4 is totally arbitrary. */ +#define PROGRAMMERS_MAX 4 +struct registered_programmer registered_programmers[PROGRAMMERS_MAX]; +int registered_programmer_count = 0; + +int register_programmer(struct registered_programmer *pgm) +{ + if (registered_programmer_count >= PROGRAMMERS_MAX) { + msg_perr("Tried to register more than %i programmer " + "interfaces.\n", PROGRAMMERS_MAX); + return 1; + } + registered_programmers[registered_programmer_count] = *pgm; + registered_programmer_count++; + + return 0; +} + +enum chipbustype get_buses_supported(void) +{ + int i; + enum chipbustype ret = BUS_NONE; + + for (i = 0; i < registered_programmer_count; i++) + ret |= registered_programmers[i].buses_supported; + + return ret; +} Index: flashrom-register_all_programmers_register_generic/flashrom.c =================================================================== --- flashrom-register_all_programmers_register_generic/flashrom.c (Revision 1463) +++ flashrom-register_all_programmers_register_generic/flashrom.c (Arbeitskopie) @@ -46,9 +46,6 @@ static char *programmer_param = NULL; -/* Supported buses for the current programmer. */ -enum chipbustype buses_supported; - /* * Programmers supporting multiple buses can have differing size limits on * each bus. Store the limits for each bus in a common struct. @@ -314,7 +311,6 @@ .fwh = 0xffffffff, .spi = 0xffffffff, }; - buses_supported = BUS_NONE; /* Default to top aligned flash at 4 GB. */ flashbase = 0; /* Registering shutdown functions is now allowed. */ @@ -936,7 +932,8 @@ return 1; } -int probe_flash(int startchip, struct flashchip *fill_flash, int force) +int probe_flash(struct registered_programmer *pgm, int startchip, + struct flashchip *fill_flash, int force) { const struct flashchip *flash; unsigned long base = 0; @@ -948,11 +945,12 @@ for (flash = flashchips + startchip; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; - buses_common = buses_supported & flash->bustype; + buses_common = pgm->buses_supported & flash->bustype; if (!buses_common) { +#if 0 // Does not really make sense anymore if we use a programmer-centric walk. msg_gspew("Probing for %s %s, %d kB: skipped. ", flash->vendor, flash->name, flash->total_size); - tmp = flashbuses_to_text(buses_supported); + tmp = flashbuses_to_text(get_buses_supported()); msg_gspew("Host bus type %s ", tmp); free(tmp); tmp = flashbuses_to_text(flash->bustype); @@ -960,6 +958,7 @@ tmp); free(tmp); msg_gspew("\n"); +#endif continue; } msg_gdbg("Probing for %s %s, %d kB: ", @@ -975,6 +974,7 @@ /* Start filling in the dynamic data. */ *fill_flash = *flash; + fill_flash->pgm = pgm; base = flashbase ? flashbase : (0xffffffff - size + 1); fill_flash->virtual_memory = (chipaddr)programmer_map_flash_region("flash chip", base, size); Index: flashrom-register_all_programmers_register_generic/programmer.h =================================================================== --- flashrom-register_all_programmers_register_generic/programmer.h (Revision 1463) +++ flashrom-register_all_programmers_register_generic/programmer.h (Arbeitskopie) @@ -93,8 +93,8 @@ int (*init) (void); - void * (*map_flash_region) (const char *descr, unsigned long phys_addr, - size_t len); + void *(*map_flash_region) (const char *descr, unsigned long phys_addr, + size_t len); void (*unmap_flash_region) (void *virt_addr, size_t len); void (*delay) (int usecs); @@ -341,31 +341,6 @@ void rmmio_valw(void *addr); void rmmio_vall(void *addr); -/* programmer.c */ -int noop_shutdown(void); -void *fallback_map(const char *descr, unsigned long phys_addr, size_t len); -void fallback_unmap(void *virt_addr, size_t len); -uint8_t noop_chip_readb(const chipaddr addr); -void noop_chip_writeb(uint8_t val, chipaddr addr); -void fallback_chip_writew(uint16_t val, chipaddr addr); -void fallback_chip_writel(uint32_t val, chipaddr addr); -void fallback_chip_writen(uint8_t *buf, chipaddr addr, size_t len); -uint16_t fallback_chip_readw(const chipaddr addr); -uint32_t fallback_chip_readl(const chipaddr addr); -void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); -struct par_programmer { - void (*chip_writeb) (uint8_t val, chipaddr addr); - void (*chip_writew) (uint16_t val, chipaddr addr); - void (*chip_writel) (uint32_t val, chipaddr addr); - void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); - uint8_t (*chip_readb) (const chipaddr addr); - uint16_t (*chip_readw) (const chipaddr addr); - uint32_t (*chip_readl) (const chipaddr addr); - void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); -}; -extern const struct par_programmer *par_programmer; -void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); - /* dummyflasher.c */ #if CONFIG_DUMMY == 1 int dummy_init(void); @@ -632,6 +607,42 @@ extern const struct opaque_programmer *opaque_programmer; void register_opaque_programmer(const struct opaque_programmer *pgm); +/* programmer.c */ +int noop_shutdown(void); +void *fallback_map(const char *descr, unsigned long phys_addr, size_t len); +void fallback_unmap(void *virt_addr, size_t len); +uint8_t noop_chip_readb(const chipaddr addr); +void noop_chip_writeb(uint8_t val, chipaddr addr); +void fallback_chip_writew(uint16_t val, chipaddr addr); +void fallback_chip_writel(uint32_t val, chipaddr addr); +void fallback_chip_writen(uint8_t *buf, chipaddr addr, size_t len); +uint16_t fallback_chip_readw(const chipaddr addr); +uint32_t fallback_chip_readl(const chipaddr addr); +void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); +struct par_programmer { + void (*chip_writeb) (uint8_t val, chipaddr addr); + void (*chip_writew) (uint16_t val, chipaddr addr); + void (*chip_writel) (uint32_t val, chipaddr addr); + void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); + uint8_t (*chip_readb) (const chipaddr addr); + uint16_t (*chip_readw) (const chipaddr addr); + uint32_t (*chip_readl) (const chipaddr addr); + void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); +}; +extern const struct par_programmer *par_programmer; +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); +struct registered_programmer { + enum chipbustype buses_supported; + union { + struct par_programmer par; + struct spi_programmer spi; + struct opaque_programmer opaque; + }; +}; +extern struct registered_programmer registered_programmers[]; +extern int registered_programmer_count; +int register_programmer(struct registered_programmer *pgm); + /* serprog.c */ #if CONFIG_SERPROG == 1 int serprog_init(void); -- http://www.hailfinger.org/

1 1

unsupported chip
by Alexander Kaupp 10 Nov '11

10 Nov '11

flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 974M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 978 us, 10000 myus = 10287 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "ECS" DMI string system-product-name: "GeForce7050M-M" DMI string system-version: "1.0 " DMI string baseboard-manufacturer: "ECS" DMI string baseboard-product-name: "GeForce7050M-M" DMI string baseboard-version: "1.0 " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8726 Found chipset "NVIDIA MCP67", enabling flash write... chipset PCI ID is 10de:0548, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI Found SMBus device 10de:0542 at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Super I/O ID 0x8726 is not on the list of flash capable controllers. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2, id2 0x13 No operations were specified.

2 1

[PATCH] Register Parallel/LPC/FWH programmers
by Carl-Daniel Hailfinger 10 Nov '11

10 Nov '11

Register Parallel/LPC/FWH programmers the same way SPI programmers are registered. This patch is not yet 100% clean (80 column limit violations etc.), but the general idea should be clear. We need something like this patch to handle programmers with multiple flash chips (e.g. LPC/FWH chips mapped to different regions on mainboards). TODO: - Should register_par_programmer(...) be called before or after setting max_rom_decode.*? - Is there a better name for register_par_programmer? - Should max_rom_decode.* be part of the registration? - Should map_flash_region/unmap_flash_region be part of the registration? Please check that all programmers have a register_par_programmer call unless the chip_* functions were noop. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-register_par_programmer/drkaiser.c =================================================================== --- flashrom-register_par_programmer/drkaiser.c (Revision 1325) +++ flashrom-register_par_programmer/drkaiser.c (Arbeitskopie) @@ -37,6 +37,17 @@ static uint8_t *drkaiser_bar; +static const struct par_programmer par_programmer_drkaiser = { + .chip_readb = drkaiser_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = drkaiser_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int drkaiser_init(void) { uint32_t addr; @@ -53,7 +64,8 @@ drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", addr, 128 * 1024); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_drkaiser, CHIP_BUSTYPE_PARALLEL); + max_rom_decode.parallel = 131072; return 0; } Index: flashrom-register_par_programmer/it87spi.c =================================================================== --- flashrom-register_par_programmer/it87spi.c (Revision 1325) +++ flashrom-register_par_programmer/it87spi.c (Arbeitskopie) @@ -193,7 +193,7 @@ free(portpos); exit_conf_mode_ite(port); it8716f_flashport = flashport; - if (buses_supported & CHIP_BUSTYPE_SPI) + if (internal_buses_supported & CHIP_BUSTYPE_SPI) msg_pdbg("Overriding chipset SPI with IT87 SPI.\n"); /* FIXME: Add the SPI bus or replace the other buses with it? */ register_spi_programmer(&spi_programmer_it87xx); Index: flashrom-register_par_programmer/gfxnvidia.c =================================================================== --- flashrom-register_par_programmer/gfxnvidia.c (Revision 1325) +++ flashrom-register_par_programmer/gfxnvidia.c (Arbeitskopie) @@ -60,6 +60,17 @@ {}, }; +static const struct par_programmer par_programmer_gfxnvidia = { + .chip_readb = gfxnvidia_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = gfxnvidia_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int gfxnvidia_init(void) { uint32_t reg32; @@ -78,7 +89,7 @@ nvidia_bar = physmap("NVIDIA", io_base_addr, 16 * 1024 * 1024); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_gfxnvidia, CHIP_BUSTYPE_PARALLEL); /* Write/erase doesn't work. */ programmer_may_write = 0; Index: flashrom-register_par_programmer/nicrealtek.c =================================================================== --- flashrom-register_par_programmer/nicrealtek.c (Revision 1325) +++ flashrom-register_par_programmer/nicrealtek.c (Arbeitskopie) @@ -36,13 +36,24 @@ {}, }; +static const struct par_programmer par_programmer_nicrealtek = { + .chip_readb = nicrealtek_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicrealtek_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int nicrealtek_init(void) { get_io_perms(); io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_realtek); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_nicrealtek, CHIP_BUSTYPE_PARALLEL); return 0; } Index: flashrom-register_par_programmer/serprog.c =================================================================== --- flashrom-register_par_programmer/serprog.c (Revision 1325) +++ flashrom-register_par_programmer/serprog.c (Arbeitskopie) @@ -295,6 +295,19 @@ return 0; } +static const struct par_programmer par_programmer_serprog = { + .chip_readb = serprog_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = serprog_chip_readn, + .chip_writeb = serprog_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +enum chipbustype serprog_buses_supported = CHIP_BUSTYPE_NONE; + int serprog_init(void) { uint16_t iface; @@ -454,7 +467,7 @@ msg_perr("Warning: NAK to query supported buses\n"); c = CHIP_BUSTYPE_NONSPI; /* A reasonable default for now. */ } - buses_supported = c; + serprog_buses_supported = c; if (sp_docommand(S_CMD_O_INIT, 0, NULL, 0, NULL)) { msg_perr("Error: NAK to initialize operation buffer\n"); @@ -490,6 +503,8 @@ sp_max_read_n = 0; } + register_par_programmer(&par_programmer_serprog, serprog_buses_supported); + sp_prev_was_write = 0; sp_streamed_transmit_ops = 0; sp_streamed_transmit_bytes = 0; Index: flashrom-register_par_programmer/satamv.c =================================================================== --- flashrom-register_par_programmer/satamv.c (Revision 1325) +++ flashrom-register_par_programmer/satamv.c (Arbeitskopie) @@ -40,6 +40,17 @@ #define PCI_BAR2_CONTROL 0x00c08 #define GPIO_PORT_CONTROL 0x104f0 +static const struct par_programmer par_programmer_satamv = { + .chip_readb = satamv_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satamv_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + /* * Random notes: * FCE# Flash Chip Enable @@ -125,7 +136,7 @@ mv_iobar = tmp & 0xffff; msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_satamv, CHIP_BUSTYPE_PARALLEL); /* 512 kByte with two 8-bit latches, and * 4 MByte with additional 3-bit latch. */ Index: flashrom-register_par_programmer/dummyflasher.c =================================================================== --- flashrom-register_par_programmer/dummyflasher.c (Revision 1325) +++ flashrom-register_par_programmer/dummyflasher.c (Arbeitskopie) @@ -73,6 +73,20 @@ .read = default_spi_read, .write_256 = dummy_spi_write_256, }; + +static const struct par_programmer par_programmer_dummy = { + .chip_readb = dummy_chip_readb, + .chip_readw = dummy_chip_readw, + .chip_readl = dummy_chip_readl, + .chip_readn = dummy_chip_readn, + .chip_writeb = dummy_chip_writeb, + .chip_writew = dummy_chip_writew, + .chip_writel = dummy_chip_writel, + .chip_writen = dummy_chip_writen, +}; + +enum chipbustype dummy_buses_supported = CHIP_BUSTYPE_NONE; + int dummy_init(void) { char *bustext = NULL; @@ -90,24 +104,31 @@ /* Convert the parameters to lowercase. */ tolower_string(bustext); - buses_supported = CHIP_BUSTYPE_NONE; + dummy_buses_supported = CHIP_BUSTYPE_NONE; if (strstr(bustext, "parallel")) { - buses_supported |= CHIP_BUSTYPE_PARALLEL; + dummy_buses_supported |= CHIP_BUSTYPE_PARALLEL; msg_pdbg("Enabling support for %s flash.\n", "parallel"); } if (strstr(bustext, "lpc")) { - buses_supported |= CHIP_BUSTYPE_LPC; + dummy_buses_supported |= CHIP_BUSTYPE_LPC; msg_pdbg("Enabling support for %s flash.\n", "LPC"); } if (strstr(bustext, "fwh")) { - buses_supported |= CHIP_BUSTYPE_FWH; + dummy_buses_supported |= CHIP_BUSTYPE_FWH; msg_pdbg("Enabling support for %s flash.\n", "FWH"); } + if (dummy_buses_supported & (CHIP_BUSTYPE_PARALLEL | CHIP_BUSTYPE_LPC | + CHIP_BUSTYPE_FWH)) + register_par_programmer(&par_programmer_dummy, + dummy_buses_supported & + (CHIP_BUSTYPE_PARALLEL | + CHIP_BUSTYPE_LPC | + CHIP_BUSTYPE_FWH)); if (strstr(bustext, "spi")) { register_spi_programmer(&spi_programmer_dummyflasher); msg_pdbg("Enabling support for %s flash.\n", "SPI"); } - if (buses_supported == CHIP_BUSTYPE_NONE) + if (dummy_buses_supported == CHIP_BUSTYPE_NONE) msg_pdbg("Support for all flash bus types disabled.\n"); free(bustext); Index: flashrom-register_par_programmer/internal.c =================================================================== --- flashrom-register_par_programmer/internal.c (Revision 1325) +++ flashrom-register_par_programmer/internal.c (Arbeitskopie) @@ -127,6 +127,19 @@ int is_laptop = 0; int laptop_ok = 0; +static const struct par_programmer par_programmer_internal = { + .chip_readb = internal_chip_readb, + .chip_readw = internal_chip_readw, + .chip_readl = internal_chip_readl, + .chip_readn = internal_chip_readn, + .chip_writeb = internal_chip_writeb, + .chip_writew = internal_chip_writew, + .chip_writel = internal_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +enum chipbustype internal_buses_supported = CHIP_BUSTYPE_NONE; + int internal_init(void) { #if __FLASHROM_LITTLE_ENDIAN__ @@ -180,9 +193,10 @@ get_io_perms(); /* Default to Parallel/LPC/FWH flash devices. If a known host controller - * is found, the init routine sets the buses_supported bitfield. + * is found, the host controller init routine sets the + * internal_buses_supported bitfield. */ - buses_supported = CHIP_BUSTYPE_NONSPI; + internal_buses_supported = CHIP_BUSTYPE_NONSPI; /* Initialize PCI access for flash enables */ pacc = pci_alloc(); /* Get the pci_access structure */ @@ -267,6 +281,11 @@ * Besides that, we don't check the board enable return code either. */ #if defined(__i386__) || defined(__x86_64__) || defined (__mips) + register_par_programmer(&par_programmer_internal, internal_buses_supported); + /* FIXME: Move this message out of chipset_enable.c. */ + msg_pinfo("This chipset supports the following protocols: %s.\n", + flashbuses_to_text(buses_supported)); + return 0; #else msg_perr("Your platform is not supported yet for the internal " Index: flashrom-register_par_programmer/nicnatsemi.c =================================================================== --- flashrom-register_par_programmer/nicnatsemi.c (Revision 1325) +++ flashrom-register_par_programmer/nicnatsemi.c (Arbeitskopie) @@ -35,13 +35,24 @@ {}, }; +static const struct par_programmer par_programmer_nicnatsemi = { + .chip_readb = nicnatsemi_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicnatsemi_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int nicnatsemi_init(void) { get_io_perms(); io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_nicnatsemi, CHIP_BUSTYPE_PARALLEL); /* The datasheet shows address lines MA0-MA16 in one place and MA0-MA15 * in another. My NIC has MA16 connected to A16 on the boot ROM socket Index: flashrom-register_par_programmer/it85spi.c =================================================================== --- flashrom-register_par_programmer/it85spi.c (Revision 1325) +++ flashrom-register_par_programmer/it85spi.c (Arbeitskopie) @@ -254,7 +254,11 @@ INDIRECT_A3(shm_io_base, (base >> 24)); #endif #ifdef LPC_MEMORY - base = (chipaddr)programmer_map_flash_region("it85 communication", + /* WTF?!? FIXME: This should use physmap instead. And it should + * automatically block accessing that region for anything else. + * Major TODO here, and it will be a lot of work. + */ + base = (chipaddr)physmap("it85 communication", 0xFFFFF000, 0x1000); msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__, (unsigned int)base); @@ -282,16 +286,17 @@ { int ret; - if (!(buses_supported & CHIP_BUSTYPE_FWH)) { + if (!(internal_buses_supported & CHIP_BUSTYPE_FWH)) { msg_pdbg("%s():%d buses not support FWH\n", __func__, __LINE__); return 1; } ret = it85xx_spi_common_init(s); msg_pdbg("FWH: %s():%d ret=%d\n", __func__, __LINE__, ret); if (!ret) { - msg_pdbg("%s():%d buses_supported=0x%x\n", __func__, __LINE__, - buses_supported); - if (buses_supported & CHIP_BUSTYPE_FWH) + msg_pdbg("%s():%d internal_buses_supported=0x%x\n", __func__, __LINE__, + internal_buses_supported); + /* FIXME: We check for FWH, but claim SPI override? WTF? */ + if (internal_buses_supported & CHIP_BUSTYPE_FWH) msg_pdbg("Overriding chipset SPI with IT85 FWH|SPI.\n"); /* Really leave FWH enabled? */ /* Set this as spi controller. */ Index: flashrom-register_par_programmer/atahpt.c =================================================================== --- flashrom-register_par_programmer/atahpt.c (Revision 1325) +++ flashrom-register_par_programmer/atahpt.c (Arbeitskopie) @@ -38,6 +38,17 @@ {}, }; +static const struct par_programmer par_programmer_atahpt = { + .chip_readb = atahpt_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = atahpt_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int atahpt_init(void) { uint32_t reg32; @@ -51,7 +62,7 @@ reg32 |= (1 << 24); rpci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_atahpt, CHIP_BUSTYPE_PARALLEL); return 0; } Index: flashrom-register_par_programmer/nic3com.c =================================================================== --- flashrom-register_par_programmer/nic3com.c (Revision 1325) +++ flashrom-register_par_programmer/nic3com.c (Arbeitskopie) @@ -55,6 +55,17 @@ {}, }; +static const struct par_programmer par_programmer_nic3com = { + .chip_readb = nic3com_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nic3com_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int nic3com_init(void) { get_io_perms(); @@ -81,8 +92,8 @@ */ OUTW(SELECT_REG_WINDOW + 0, io_base_addr + INT_STATUS); - buses_supported = CHIP_BUSTYPE_PARALLEL; max_rom_decode.parallel = 128 * 1024; + register_par_programmer(&par_programmer_nic3com, CHIP_BUSTYPE_PARALLEL); return 0; } Index: flashrom-register_par_programmer/satasii.c =================================================================== --- flashrom-register_par_programmer/satasii.c (Revision 1325) +++ flashrom-register_par_programmer/satasii.c (Arbeitskopie) @@ -40,6 +40,17 @@ {}, }; +static const struct par_programmer par_programmer_satasii = { + .chip_readb = satasii_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satasii_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int satasii_init(void) { uint32_t addr; @@ -65,7 +76,7 @@ if ((id != 0x0680) && (!(pci_mmio_readl(sii_bar) & (1 << 26)))) msg_pinfo("Warning: Flash seems unconnected.\n"); - buses_supported = CHIP_BUSTYPE_PARALLEL; + register_par_programmer(&par_programmer_satasii, CHIP_BUSTYPE_PARALLEL); return 0; } Index: flashrom-register_par_programmer/nicintel.c =================================================================== --- flashrom-register_par_programmer/nicintel.c (Revision 1325) +++ flashrom-register_par_programmer/nicintel.c (Arbeitskopie) @@ -41,6 +41,17 @@ #define CSR_FCR 0x0c +static const struct par_programmer par_programmer_nicintel = { + .chip_readb = nicintel_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicintel_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + int nicintel_init(void) { uintptr_t addr; @@ -78,9 +89,8 @@ */ pci_rmmio_writew(0x0001, nicintel_control_bar + CSR_FCR); - buses_supported = CHIP_BUSTYPE_PARALLEL; - max_rom_decode.parallel = NICINTEL_MEMMAP_SIZE; + register_par_programmer(&par_programmer_nicintel, CHIP_BUSTYPE_PARALLEL); return 0; Index: flashrom-register_par_programmer/chipset_enable.c =================================================================== --- flashrom-register_par_programmer/chipset_enable.c (Revision 1325) +++ flashrom-register_par_programmer/chipset_enable.c (Arbeitskopie) @@ -208,7 +208,7 @@ uint16_t old, new; uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */ - buses_supported = CHIP_BUSTYPE_PARALLEL; + internal_buses_supported = CHIP_BUSTYPE_PARALLEL; old = pci_read_word(dev, xbcs); @@ -286,7 +286,7 @@ * FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and * FB_DEC_EN2. */ - buses_supported = CHIP_BUSTYPE_FWH; + internal_buses_supported = CHIP_BUSTYPE_FWH; return enable_flash_ich(dev, name, 0x4e); } @@ -383,9 +383,9 @@ msg_pdbg("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh); /* If we're called by enable_flash_ich_dc_spi, it will override - * buses_supported anyway. + * internal_buses_supported anyway. */ - buses_supported = CHIP_BUSTYPE_FWH; + internal_buses_supported = CHIP_BUSTYPE_FWH; return enable_flash_ich(dev, name, 0xdc); } @@ -405,7 +405,7 @@ if (new != old) rpci_write_byte(dev, 0xd9, new); - buses_supported = CHIP_BUSTYPE_FWH; + internal_buses_supported = CHIP_BUSTYPE_FWH; return 0; } @@ -458,7 +458,7 @@ * on ICH7 when the southbridge is strapped to LPC */ - buses_supported = CHIP_BUSTYPE_FWH; + internal_buses_supported = CHIP_BUSTYPE_FWH; if (ich_generation == 7) { if(bbs == ICH_STRAP_LPC) { /* No further SPI initialization required */ @@ -466,7 +466,7 @@ } else /* Disable LPC/FWH if strapped to PCI or SPI */ - buses_supported = 0; + internal_buses_supported = 0; } /* this adds CHIP_BUSTYPE_SPI */ @@ -557,7 +557,7 @@ #define CS5530_ENABLE_SA2320 (1 << 2) #define CS5530_ENABLE_SA20 (1 << 6) - buses_supported = CHIP_BUSTYPE_PARALLEL; + internal_buses_supported = CHIP_BUSTYPE_PARALLEL; /* Decode 0x000E0000-0x000FFFFF (128 kB), not just 64 kB, and * decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 kB. * FIXME: Should we really touch the low mapping below 1 MB? Flashrom @@ -707,7 +707,7 @@ (prot & 0xfffff800) + (((prot & 0x7fc) << 8) | 0x3ff)); } - buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH; + internal_buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH; ret = sb600_probe_spi(dev); @@ -793,7 +793,7 @@ { uint8_t tmp; - buses_supported = CHIP_BUSTYPE_PARALLEL; + internal_buses_supported = CHIP_BUSTYPE_PARALLEL; tmp = INB(0xc06); tmp |= 0x1; @@ -893,7 +893,7 @@ switch ((val >> 5) & 0x3) { case 0x0: ret = enable_flash_mcp55(dev, name); - buses_supported = CHIP_BUSTYPE_LPC; + internal_buses_supported = CHIP_BUSTYPE_LPC; msg_pdbg("Flash bus type is LPC\n"); break; case 0x2: @@ -901,14 +901,14 @@ /* SPI is added in mcp6x_spi_init if it works. * Do we really want to disable LPC in this case? */ - buses_supported = CHIP_BUSTYPE_NONE; + internal_buses_supported = CHIP_BUSTYPE_NONE; msg_pdbg("Flash bus type is SPI\n"); msg_perr("SPI on this chipset is WIP. Write is unsupported!\n"); programmer_may_write = 0; break; default: /* Should not happen. */ - buses_supported = CHIP_BUSTYPE_NONE; + internal_buses_supported = CHIP_BUSTYPE_NONE; msg_pdbg("Flash bus type is unknown (none)\n"); msg_pinfo("Something went wrong with bus type detection.\n"); goto out_msg; @@ -1215,8 +1215,5 @@ msg_pinfo("PROBLEMS, continuing anyway\n"); } - msg_pinfo("This chipset supports the following protocols: %s.\n", - flashbuses_to_text(buses_supported)); - return ret; } Index: flashrom-register_par_programmer/programmer.c =================================================================== --- flashrom-register_par_programmer/programmer.c (Revision 1325) +++ flashrom-register_par_programmer/programmer.c (Arbeitskopie) @@ -19,7 +19,21 @@ */ #include "flash.h" +#include "programmer.h" +static const struct par_programmer par_programmer_none = { + .chip_readb = noop_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = noop_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +const struct par_programmer *par_programmer = &par_programmer_none; + /* No-op shutdown() for programmers which don't need special handling */ int noop_shutdown(void) { @@ -96,3 +110,9 @@ buf[i] = chip_readb(addr + i); return; } + +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses) +{ + par_programmer = pgm; + buses_supported |= buses; +} Index: flashrom-register_par_programmer/flashrom.c =================================================================== --- flashrom-register_par_programmer/flashrom.c (Revision 1325) +++ flashrom-register_par_programmer/flashrom.c (Arbeitskopie) @@ -132,14 +132,6 @@ .shutdown = internal_shutdown, .map_flash_region = physmap, .unmap_flash_region = physunmap, - .chip_readb = internal_chip_readb, - .chip_readw = internal_chip_readw, - .chip_readl = internal_chip_readl, - .chip_readn = internal_chip_readn, - .chip_writeb = internal_chip_writeb, - .chip_writew = internal_chip_writew, - .chip_writel = internal_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -151,14 +143,6 @@ .shutdown = dummy_shutdown, .map_flash_region = dummy_map, .unmap_flash_region = dummy_unmap, - .chip_readb = dummy_chip_readb, - .chip_readw = dummy_chip_readw, - .chip_readl = dummy_chip_readl, - .chip_readn = dummy_chip_readn, - .chip_writeb = dummy_chip_writeb, - .chip_writew = dummy_chip_writew, - .chip_writel = dummy_chip_writel, - .chip_writen = dummy_chip_writen, .delay = internal_delay, }, #endif @@ -170,14 +154,6 @@ .shutdown = nic3com_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nic3com_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nic3com_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -191,14 +167,6 @@ .shutdown = nicrealtek_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicrealtek_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicrealtek_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -210,14 +178,6 @@ .shutdown = nicnatsemi_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicnatsemi_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicnatsemi_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -229,14 +189,6 @@ .shutdown = gfxnvidia_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = gfxnvidia_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = gfxnvidia_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -248,14 +200,6 @@ .shutdown = drkaiser_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = drkaiser_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = drkaiser_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -267,14 +211,6 @@ .shutdown = satasii_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = satasii_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = satasii_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -286,14 +222,6 @@ .shutdown = atahpt_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = atahpt_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = atahpt_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -305,14 +233,6 @@ .shutdown = noop_shutdown, /* Missing shutdown */ .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -324,14 +244,6 @@ .shutdown = serprog_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = serprog_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = serprog_chip_readn, - .chip_writeb = serprog_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = serprog_delay, }, #endif @@ -343,14 +255,6 @@ .shutdown = buspirate_spi_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -362,14 +266,6 @@ .shutdown = dediprog_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -381,14 +277,6 @@ .shutdown = noop_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -400,14 +288,6 @@ .shutdown = nicintel_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicintel_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicintel_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -419,14 +299,6 @@ .shutdown = nicintel_spi_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -438,14 +310,6 @@ .shutdown = ogp_spi_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -457,14 +321,6 @@ .shutdown = satamv_shutdown, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = satamv_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = satamv_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -566,42 +422,42 @@ void chip_writeb(uint8_t val, chipaddr addr) { - programmer_table[programmer].chip_writeb(val, addr); + par_programmer->chip_writeb(val, addr); } void chip_writew(uint16_t val, chipaddr addr) { - programmer_table[programmer].chip_writew(val, addr); + par_programmer->chip_writew(val, addr); } void chip_writel(uint32_t val, chipaddr addr) { - programmer_table[programmer].chip_writel(val, addr); + par_programmer->chip_writel(val, addr); } void chip_writen(uint8_t *buf, chipaddr addr, size_t len) { - programmer_table[programmer].chip_writen(buf, addr, len); + par_programmer->chip_writen(buf, addr, len); } uint8_t chip_readb(const chipaddr addr) { - return programmer_table[programmer].chip_readb(addr); + return par_programmer->chip_readb(addr); } uint16_t chip_readw(const chipaddr addr) { - return programmer_table[programmer].chip_readw(addr); + return par_programmer->chip_readw(addr); } uint32_t chip_readl(const chipaddr addr) { - return programmer_table[programmer].chip_readl(addr); + return par_programmer->chip_readl(addr); } void chip_readn(uint8_t *buf, chipaddr addr, size_t len) { - programmer_table[programmer].chip_readn(buf, addr, len); + par_programmer->chip_readn(buf, addr, len); } void programmer_delay(int usecs) Index: flashrom-register_par_programmer/programmer.h =================================================================== --- flashrom-register_par_programmer/programmer.h (Revision 1325) +++ flashrom-register_par_programmer/programmer.h (Arbeitskopie) @@ -95,14 +95,6 @@ size_t len); void (*unmap_flash_region) (void *virt_addr, size_t len); - void (*chip_writeb) (uint8_t val, chipaddr addr); - void (*chip_writew) (uint16_t val, chipaddr addr); - void (*chip_writel) (uint32_t val, chipaddr addr); - void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); - uint8_t (*chip_readb) (const chipaddr addr); - uint16_t (*chip_readw) (const chipaddr addr); - uint32_t (*chip_readl) (const chipaddr addr); - void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); void (*delay) (int usecs); }; @@ -302,6 +294,7 @@ extern int force_boardmismatch; void probe_superio(void); int register_superio(struct superio s); +extern enum chipbustype internal_buses_supported; int internal_init(void); int internal_shutdown(void); void internal_chip_writeb(uint8_t val, chipaddr addr); @@ -357,6 +350,18 @@ uint16_t fallback_chip_readw(const chipaddr addr); uint32_t fallback_chip_readl(const chipaddr addr); void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); +struct par_programmer { + void (*chip_writeb) (uint8_t val, chipaddr addr); + void (*chip_writew) (uint16_t val, chipaddr addr); + void (*chip_writel) (uint32_t val, chipaddr addr); + void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); + uint8_t (*chip_readb) (const chipaddr addr); + uint16_t (*chip_readw) (const chipaddr addr); + uint32_t (*chip_readl) (const chipaddr addr); + void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); +}; +extern const struct par_programmer *par_programmer; +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); /* dummyflasher.c */ #if CONFIG_DUMMY == 1 Index: flashrom-register_par_programmer/board_enable.c =================================================================== --- flashrom-register_par_programmer/board_enable.c (Revision 1325) +++ flashrom-register_par_programmer/board_enable.c (Arbeitskopie) @@ -424,7 +424,7 @@ /* Check if at least one flash segment is enabled. */ if (tmp & 0xf0) { /* The IT8705F will respond to LPC cycles and translate them. */ - buses_supported = CHIP_BUSTYPE_PARALLEL; + internal_buses_supported = CHIP_BUSTYPE_PARALLEL; /* Flash ROM I/F Writes Enable */ tmp |= 0x04; msg_pdbg("Enabling IT8705F flash ROM interface write.\n"); -- http://www.hailfinger.org/

3 6

[commit] r1463 - trunk
by repository service 10 Nov '11

10 Nov '11

Author: hailfinger Date: Thu Nov 10 00:40:00 2011 New Revision: 1463 URL: http://flashrom.org/trac/flashrom/changeset/1463 Log: Register Parallel/LPC/FWH programmers the same way SPI programmers are registered. All programmers are now calling programmer registration functions and direct manipulations of buses_supported are not needed/possible anymore. Note: Programmers without parallel/LPC/FWH chip support should not call register_par_programmer(). Additional fixes: Set max_rom_decode.parallel for drkaiser. Remove abuse of programmer_map_flash_region in it85spi. Annotate several FIXMEs in it85spi. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-By: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/atahpt.c trunk/board_enable.c trunk/chipset_enable.c trunk/cli_classic.c trunk/drkaiser.c trunk/dummyflasher.c trunk/flashrom.c trunk/gfxnvidia.c trunk/ichspi.c trunk/internal.c trunk/it85spi.c trunk/it87spi.c trunk/nic3com.c trunk/nicintel.c trunk/nicnatsemi.c trunk/nicrealtek.c trunk/programmer.c trunk/programmer.h trunk/satamv.c trunk/satasii.c trunk/serprog.c trunk/wbsio_spi.c Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/atahpt.c Thu Nov 10 00:40:00 2011 (r1463) @@ -40,6 +40,17 @@ {}, }; +static const struct par_programmer par_programmer_atahpt = { + .chip_readb = atahpt_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = atahpt_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int atahpt_shutdown(void *data) { /* Flash access is disabled automatically by PCI restore. */ @@ -61,10 +72,11 @@ reg32 |= (1 << 24); rpci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); - buses_supported = BUS_PARALLEL; - if (register_shutdown(atahpt_shutdown, NULL)) return 1; + + register_par_programmer(&par_programmer_atahpt, BUS_PARALLEL); + return 0; } Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/board_enable.c Thu Nov 10 00:40:00 2011 (r1463) @@ -425,7 +425,7 @@ /* Check if at least one flash segment is enabled. */ if (tmp & 0xf0) { /* The IT8705F will respond to LPC cycles and translate them. */ - buses_supported = BUS_PARALLEL; + internal_buses_supported = BUS_PARALLEL; /* Flash ROM I/F Writes Enable */ tmp |= 0x04; msg_pdbg("Enabling IT8705F flash ROM interface write.\n"); Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/chipset_enable.c Thu Nov 10 00:40:00 2011 (r1463) @@ -213,7 +213,7 @@ uint16_t old, new; uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */ - buses_supported = BUS_PARALLEL; + internal_buses_supported = BUS_PARALLEL; old = pci_read_word(dev, xbcs); @@ -303,7 +303,7 @@ * FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and * FB_DEC_EN2. */ - buses_supported = BUS_FWH; + internal_buses_supported = BUS_FWH; return enable_flash_ich(dev, name, 0x4e); } @@ -412,9 +412,9 @@ msg_pdbg("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh); /* If we're called by enable_flash_ich_dc_spi, it will override - * buses_supported anyway. + * internal_buses_supported anyway. */ - buses_supported = BUS_FWH; + internal_buses_supported = BUS_FWH; return enable_flash_ich(dev, name, 0xdc); } @@ -434,7 +434,7 @@ if (new != old) rpci_write_byte(dev, 0xd9, new); - buses_supported = BUS_FWH; + internal_buses_supported = BUS_FWH; return 0; } @@ -468,12 +468,11 @@ bnt = mmio_readl(rcrb + 0x3410); if (bnt & 0x02) { /* If strapped to LPC, no SPI initialization is required */ - buses_supported = BUS_FWH; + internal_buses_supported = BUS_FWH; return 0; } /* This adds BUS_SPI */ - buses_supported = BUS_SPI; if (ich_init_spi(dev, tmp, rcrb, 7) != 0) { if (!ret) ret = ERROR_NONFATAL; @@ -556,7 +555,7 @@ * time. At least not with our current code. So we prevent searching * on ICH7 when the southbridge is strapped to LPC */ - buses_supported = BUS_FWH; + internal_buses_supported = BUS_FWH; if (ich_generation == CHIPSET_ICH7) { if (bbs == 0x03) { /* If strapped to LPC, no further SPI initialization is @@ -564,7 +563,7 @@ return ret; } else { /* Disable LPC/FWH if strapped to PCI or SPI */ - buses_supported = 0; + internal_buses_supported = BUS_NONE; } } @@ -669,7 +668,7 @@ #define CS5530_ENABLE_SA2320 (1 << 2) #define CS5530_ENABLE_SA20 (1 << 6) - buses_supported = BUS_PARALLEL; + internal_buses_supported = BUS_PARALLEL; /* Decode 0x000E0000-0x000FFFFF (128 kB), not just 64 kB, and * decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 kB. * FIXME: Should we really touch the low mapping below 1 MB? Flashrom @@ -822,7 +821,7 @@ (prot & 0xfffff800) + (((prot & 0x7fc) << 8) | 0x3ff)); } - buses_supported = BUS_LPC | BUS_FWH; + internal_buses_supported = BUS_LPC | BUS_FWH; ret = sb600_probe_spi(dev); @@ -916,7 +915,7 @@ { uint8_t tmp; - buses_supported = BUS_PARALLEL; + internal_buses_supported = BUS_PARALLEL; tmp = INB(0xc06); tmp |= 0x1; @@ -1016,7 +1015,7 @@ switch ((val >> 5) & 0x3) { case 0x0: ret = enable_flash_mcp55(dev, name); - buses_supported = BUS_LPC; + internal_buses_supported = BUS_LPC; msg_pdbg("Flash bus type is LPC\n"); break; case 0x2: @@ -1024,7 +1023,7 @@ /* SPI is added in mcp6x_spi_init if it works. * Do we really want to disable LPC in this case? */ - buses_supported = BUS_NONE; + internal_buses_supported = BUS_NONE; msg_pdbg("Flash bus type is SPI\n"); msg_pinfo("SPI on this chipset is WIP. Please report any " "success or failure by mailing us the verbose " @@ -1032,7 +1031,7 @@ break; default: /* Should not happen. */ - buses_supported = BUS_NONE; + internal_buses_supported = BUS_NONE; msg_pdbg("Flash bus type is unknown (none)\n"); msg_pinfo("Something went wrong with bus type detection.\n"); goto out_msg; @@ -1325,7 +1324,6 @@ struct pci_dev *dev = NULL; int ret = -2; /* Nothing! */ int i; - char *s; /* Now let's try to find the chipset we have... */ for (i = 0; chipset_enables[i].vendor_name != NULL; i++) { @@ -1377,9 +1375,5 @@ } } - s = flashbuses_to_text(buses_supported); - msg_pinfo("This chipset supports the following protocols: %s.\n", s); - free(s); - return ret; } Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/cli_classic.c Thu Nov 10 00:40:00 2011 (r1463) @@ -443,6 +443,10 @@ ret = 1; goto out_shutdown; } + tempstr = flashbuses_to_text(buses_supported); + msg_pdbg("This programmer supports the following protocols: %s.\n", + tempstr); + free(tempstr); for (i = 0; i < ARRAY_SIZE(flashes); i++) { startchip = probe_flash(startchip, &flashes[i], 0); Modified: trunk/drkaiser.c ============================================================================== --- trunk/drkaiser.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/drkaiser.c Thu Nov 10 00:40:00 2011 (r1463) @@ -39,6 +39,17 @@ static uint8_t *drkaiser_bar; +static const struct par_programmer par_programmer_drkaiser = { + .chip_readb = drkaiser_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = drkaiser_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int drkaiser_shutdown(void *data) { physunmap(drkaiser_bar, DRKAISER_MEMMAP_SIZE); @@ -64,10 +75,12 @@ drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", addr, DRKAISER_MEMMAP_SIZE); - buses_supported = BUS_PARALLEL; - if (register_shutdown(drkaiser_shutdown, NULL)) return 1; + + max_rom_decode.parallel = 128 * 1024; + register_par_programmer(&par_programmer_drkaiser, BUS_PARALLEL); + return 0; } Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/dummyflasher.c Thu Nov 10 00:40:00 2011 (r1463) @@ -75,6 +75,19 @@ .write_256 = dummy_spi_write_256, }; +static const struct par_programmer par_programmer_dummy = { + .chip_readb = dummy_chip_readb, + .chip_readw = dummy_chip_readw, + .chip_readl = dummy_chip_readl, + .chip_readn = dummy_chip_readn, + .chip_writeb = dummy_chip_writeb, + .chip_writew = dummy_chip_writew, + .chip_writel = dummy_chip_writel, + .chip_writen = dummy_chip_writen, +}; + +enum chipbustype dummy_buses_supported = BUS_NONE; + static int dummy_shutdown(void *data) { msg_pspew("%s\n", __func__); @@ -108,24 +121,24 @@ /* Convert the parameters to lowercase. */ tolower_string(bustext); - buses_supported = BUS_NONE; + dummy_buses_supported = BUS_NONE; if (strstr(bustext, "parallel")) { - buses_supported |= BUS_PARALLEL; + dummy_buses_supported |= BUS_PARALLEL; msg_pdbg("Enabling support for %s flash.\n", "parallel"); } if (strstr(bustext, "lpc")) { - buses_supported |= BUS_LPC; + dummy_buses_supported |= BUS_LPC; msg_pdbg("Enabling support for %s flash.\n", "LPC"); } if (strstr(bustext, "fwh")) { - buses_supported |= BUS_FWH; + dummy_buses_supported |= BUS_FWH; msg_pdbg("Enabling support for %s flash.\n", "FWH"); } if (strstr(bustext, "spi")) { - register_spi_programmer(&spi_programmer_dummyflasher); + dummy_buses_supported |= BUS_SPI; msg_pdbg("Enabling support for %s flash.\n", "SPI"); } - if (buses_supported == BUS_NONE) + if (dummy_buses_supported == BUS_NONE) msg_pdbg("Support for all flash bus types disabled.\n"); free(bustext); @@ -226,6 +239,14 @@ free(flashchip_contents); return 1; } + if (dummy_buses_supported & (BUS_PARALLEL | BUS_LPC | BUS_FWH)) + register_par_programmer(&par_programmer_dummy, + dummy_buses_supported & + (BUS_PARALLEL | BUS_LPC | + BUS_FWH)); + if (dummy_buses_supported & BUS_SPI) + register_spi_programmer(&spi_programmer_dummyflasher); + return 0; } Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/flashrom.c Thu Nov 10 00:40:00 2011 (r1463) @@ -68,14 +68,6 @@ .init = internal_init, .map_flash_region = physmap, .unmap_flash_region = physunmap, - .chip_readb = internal_chip_readb, - .chip_readw = internal_chip_readw, - .chip_readl = internal_chip_readl, - .chip_readn = internal_chip_readn, - .chip_writeb = internal_chip_writeb, - .chip_writew = internal_chip_writew, - .chip_writel = internal_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -86,14 +78,6 @@ .init = dummy_init, .map_flash_region = dummy_map, .unmap_flash_region = dummy_unmap, - .chip_readb = dummy_chip_readb, - .chip_readw = dummy_chip_readw, - .chip_readl = dummy_chip_readl, - .chip_readn = dummy_chip_readn, - .chip_writeb = dummy_chip_writeb, - .chip_writew = dummy_chip_writew, - .chip_writel = dummy_chip_writel, - .chip_writen = dummy_chip_writen, .delay = internal_delay, }, #endif @@ -104,14 +88,6 @@ .init = nic3com_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nic3com_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nic3com_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -124,14 +100,6 @@ .init = nicrealtek_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicrealtek_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicrealtek_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -142,14 +110,6 @@ .init = nicnatsemi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicnatsemi_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicnatsemi_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -160,14 +120,6 @@ .init = gfxnvidia_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = gfxnvidia_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = gfxnvidia_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -178,14 +130,6 @@ .init = drkaiser_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = drkaiser_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = drkaiser_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -196,14 +140,6 @@ .init = satasii_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = satasii_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = satasii_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -214,14 +150,6 @@ .init = atahpt_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = atahpt_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = atahpt_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -232,14 +160,6 @@ .init = ft2232_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -250,14 +170,6 @@ .init = serprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = serprog_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = serprog_chip_readn, - .chip_writeb = serprog_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = serprog_delay, }, #endif @@ -268,14 +180,6 @@ .init = buspirate_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -286,14 +190,6 @@ .init = dediprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -304,14 +200,6 @@ .init = rayer_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -322,14 +210,6 @@ .init = nicintel_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = nicintel_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = nicintel_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -340,14 +220,6 @@ .init = nicintel_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -358,14 +230,6 @@ .init = ogp_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -376,14 +240,6 @@ .init = satamv_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = satamv_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = satamv_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -394,14 +250,6 @@ .init = linux_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif @@ -513,42 +361,42 @@ void chip_writeb(uint8_t val, chipaddr addr) { - programmer_table[programmer].chip_writeb(val, addr); + par_programmer->chip_writeb(val, addr); } void chip_writew(uint16_t val, chipaddr addr) { - programmer_table[programmer].chip_writew(val, addr); + par_programmer->chip_writew(val, addr); } void chip_writel(uint32_t val, chipaddr addr) { - programmer_table[programmer].chip_writel(val, addr); + par_programmer->chip_writel(val, addr); } void chip_writen(uint8_t *buf, chipaddr addr, size_t len) { - programmer_table[programmer].chip_writen(buf, addr, len); + par_programmer->chip_writen(buf, addr, len); } uint8_t chip_readb(const chipaddr addr) { - return programmer_table[programmer].chip_readb(addr); + return par_programmer->chip_readb(addr); } uint16_t chip_readw(const chipaddr addr) { - return programmer_table[programmer].chip_readw(addr); + return par_programmer->chip_readw(addr); } uint32_t chip_readl(const chipaddr addr) { - return programmer_table[programmer].chip_readl(addr); + return par_programmer->chip_readl(addr); } void chip_readn(uint8_t *buf, chipaddr addr, size_t len) { - programmer_table[programmer].chip_readn(buf, addr, len); + par_programmer->chip_readn(buf, addr, len); } void programmer_delay(int usecs) Modified: trunk/gfxnvidia.c ============================================================================== --- trunk/gfxnvidia.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/gfxnvidia.c Thu Nov 10 00:40:00 2011 (r1463) @@ -61,6 +61,17 @@ {}, }; +static const struct par_programmer par_programmer_gfxnvidia = { + .chip_readb = gfxnvidia_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = gfxnvidia_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int gfxnvidia_shutdown(void *data) { physunmap(nvidia_bar, GFXNVIDIA_MEMMAP_SIZE); @@ -94,10 +105,9 @@ reg32 &= ~(1 << 0); rpci_write_long(pcidev_dev, 0x50, reg32); - buses_supported = BUS_PARALLEL; - /* Write/erase doesn't work. */ programmer_may_write = 0; + register_par_programmer(&par_programmer_gfxnvidia, BUS_PARALLEL); return 0; } Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/ichspi.c Thu Nov 10 00:40:00 2011 (r1463) @@ -1796,7 +1796,7 @@ ich_spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70); /* Not sure if it speaks all these bus protocols. */ - buses_supported = BUS_LPC | BUS_FWH; + internal_buses_supported = BUS_LPC | BUS_FWH; ich_generation = CHIPSET_ICH7; register_spi_programmer(&spi_programmer_via); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/internal.c Thu Nov 10 00:40:00 2011 (r1463) @@ -127,6 +127,19 @@ int is_laptop = 0; int laptop_ok = 0; +static const struct par_programmer par_programmer_internal = { + .chip_readb = internal_chip_readb, + .chip_readw = internal_chip_readw, + .chip_readl = internal_chip_readl, + .chip_readn = internal_chip_readn, + .chip_writeb = internal_chip_writeb, + .chip_writew = internal_chip_writew, + .chip_writel = internal_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +enum chipbustype internal_buses_supported = BUS_NONE; + static int internal_shutdown(void *data) { release_io_perms(); @@ -191,9 +204,10 @@ return 1; /* Default to Parallel/LPC/FWH flash devices. If a known host controller - * is found, the init routine sets the buses_supported bitfield. + * is found, the host controller init routine sets the + * internal_buses_supported bitfield. */ - buses_supported = BUS_NONSPI; + internal_buses_supported = BUS_NONSPI; /* Initialize PCI access for flash enables */ pacc = pci_alloc(); /* Get the pci_access structure */ @@ -287,6 +301,7 @@ * Besides that, we don't check the board enable return code either. */ #if defined(__i386__) || defined(__x86_64__) || defined (__mips) + register_par_programmer(&par_programmer_internal, internal_buses_supported); return 0; #else msg_perr("Your platform is not supported yet for the internal " Modified: trunk/it85spi.c ============================================================================== --- trunk/it85spi.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/it85spi.c Thu Nov 10 00:40:00 2011 (r1463) @@ -257,8 +257,10 @@ INDIRECT_A3(shm_io_base, (base >> 24)); #endif #ifdef LPC_MEMORY - base = (chipaddr)programmer_map_flash_region("it85 communication", - 0xFFFFF000, 0x1000); + /* FIXME: We should block accessing that region for anything else. + * Major TODO here, and it will be a lot of work. + */ + base = (chipaddr)physmap("it85 communication", 0xFFFFF000, 0x1000); msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__, (unsigned int)base); ce_high = (unsigned char *)(base + 0xE00); /* 0xFFFFFE00 */ @@ -285,18 +287,26 @@ { int ret; - if (!(buses_supported & BUS_FWH)) { + if (!(internal_buses_supported & BUS_FWH)) { msg_pdbg("%s():%d buses not support FWH\n", __func__, __LINE__); return 1; } ret = it85xx_spi_common_init(s); msg_pdbg("FWH: %s():%d ret=%d\n", __func__, __LINE__, ret); if (!ret) { - msg_pdbg("%s():%d buses_supported=0x%x\n", __func__, __LINE__, - buses_supported); - if (buses_supported & BUS_FWH) - msg_pdbg("Overriding chipset SPI with IT85 FWH|SPI.\n"); - /* Really leave FWH enabled? */ + msg_pdbg("%s: internal_buses_supported=0x%x\n", __func__, + internal_buses_supported); + /* Check for FWH because IT85 listens to FWH cycles. + * FIXME: The big question is whether FWH cycles are necessary + * for communication even if LPC_IO is defined. + */ + if (internal_buses_supported & BUS_FWH) + msg_pdbg("Registering IT85 SPI.\n"); + /* FIXME: Really leave FWH enabled? We can't use this region + * anymore since accessing it would mess up IT85 communication. + * If we decide to disable FWH for this region, we should print + * a debug message about it. + */ /* Set this as SPI controller. */ register_spi_programmer(&spi_programmer_it85xx); } Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/it87spi.c Thu Nov 10 00:40:00 2011 (r1463) @@ -192,7 +192,7 @@ free(portpos); exit_conf_mode_ite(port); it8716f_flashport = flashport; - if (buses_supported & BUS_SPI) + if (internal_buses_supported & BUS_SPI) msg_pdbg("Overriding chipset SPI with IT87 SPI.\n"); /* FIXME: Add the SPI bus or replace the other buses with it? */ register_spi_programmer(&spi_programmer_it87xx); Modified: trunk/nic3com.c ============================================================================== --- trunk/nic3com.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/nic3com.c Thu Nov 10 00:40:00 2011 (r1463) @@ -55,6 +55,17 @@ {}, }; +static const struct par_programmer par_programmer_nic3com = { + .chip_readb = nic3com_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nic3com_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int nic3com_shutdown(void *data) { /* 3COM 3C90xB cards need a special fixup. */ @@ -96,11 +107,12 @@ */ OUTW(SELECT_REG_WINDOW + 0, io_base_addr + INT_STATUS); - buses_supported = BUS_PARALLEL; - max_rom_decode.parallel = 128 * 1024; - if (register_shutdown(nic3com_shutdown, NULL)) return 1; + + max_rom_decode.parallel = 128 * 1024; + register_par_programmer(&par_programmer_nic3com, BUS_PARALLEL); + return 0; } Modified: trunk/nicintel.c ============================================================================== --- trunk/nicintel.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/nicintel.c Thu Nov 10 00:40:00 2011 (r1463) @@ -43,6 +43,17 @@ #define CSR_FCR 0x0c +static const struct par_programmer par_programmer_nicintel = { + .chip_readb = nicintel_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicintel_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int nicintel_shutdown(void *data) { physunmap(nicintel_control_bar, NICINTEL_CONTROL_MEMMAP_SIZE); @@ -93,9 +104,8 @@ */ pci_rmmio_writew(0x0001, nicintel_control_bar + CSR_FCR); - buses_supported = BUS_PARALLEL; - max_rom_decode.parallel = NICINTEL_MEMMAP_SIZE; + register_par_programmer(&par_programmer_nicintel, BUS_PARALLEL); return 0; Modified: trunk/nicnatsemi.c ============================================================================== --- trunk/nicnatsemi.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/nicnatsemi.c Thu Nov 10 00:40:00 2011 (r1463) @@ -35,6 +35,17 @@ {}, }; +static const struct par_programmer par_programmer_nicnatsemi = { + .chip_readb = nicnatsemi_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicnatsemi_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int nicnatsemi_shutdown(void *data) { pci_cleanup(pacc); @@ -48,7 +59,8 @@ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi); - buses_supported = BUS_PARALLEL; + if (register_shutdown(nicnatsemi_shutdown, NULL)) + return 1; /* The datasheet shows address lines MA0-MA16 in one place and MA0-MA15 * in another. My NIC has MA16 connected to A16 on the boot ROM socket @@ -57,9 +69,8 @@ * functions below wants to be 0x0000FFFF. */ max_rom_decode.parallel = 131072; + register_par_programmer(&par_programmer_nicnatsemi, BUS_PARALLEL); - if (register_shutdown(nicnatsemi_shutdown, NULL)) - return 1; return 0; } Modified: trunk/nicrealtek.c ============================================================================== --- trunk/nicrealtek.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/nicrealtek.c Thu Nov 10 00:40:00 2011 (r1463) @@ -36,6 +36,17 @@ {}, }; +static const struct par_programmer par_programmer_nicrealtek = { + .chip_readb = nicrealtek_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nicrealtek_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int nicrealtek_shutdown(void *data) { /* FIXME: We forgot to disable software access again. */ @@ -50,10 +61,11 @@ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_realtek); - buses_supported = BUS_PARALLEL; - if (register_shutdown(nicrealtek_shutdown, NULL)) return 1; + + register_par_programmer(&par_programmer_nicrealtek, BUS_PARALLEL); + return 0; } Modified: trunk/programmer.c ============================================================================== --- trunk/programmer.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/programmer.c Thu Nov 10 00:40:00 2011 (r1463) @@ -19,6 +19,20 @@ */ #include "flash.h" +#include "programmer.h" + +static const struct par_programmer par_programmer_none = { + .chip_readb = noop_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = noop_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +const struct par_programmer *par_programmer = &par_programmer_none; /* No-op shutdown() for programmers which don't need special handling */ int noop_shutdown(void) @@ -96,3 +110,9 @@ buf[i] = chip_readb(addr + i); return; } + +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses) +{ + par_programmer = pgm; + buses_supported |= buses; +} Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/programmer.h Thu Nov 10 00:40:00 2011 (r1463) @@ -97,14 +97,6 @@ size_t len); void (*unmap_flash_region) (void *virt_addr, size_t len); - void (*chip_writeb) (uint8_t val, chipaddr addr); - void (*chip_writew) (uint16_t val, chipaddr addr); - void (*chip_writel) (uint32_t val, chipaddr addr); - void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); - uint8_t (*chip_readb) (const chipaddr addr); - uint16_t (*chip_readw) (const chipaddr addr); - uint32_t (*chip_readl) (const chipaddr addr); - void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); void (*delay) (int usecs); }; @@ -306,6 +298,7 @@ extern int force_boardmismatch; void probe_superio(void); int register_superio(struct superio s); +extern enum chipbustype internal_buses_supported; int internal_init(void); void internal_chip_writeb(uint8_t val, chipaddr addr); void internal_chip_writew(uint16_t val, chipaddr addr); @@ -360,6 +353,18 @@ uint16_t fallback_chip_readw(const chipaddr addr); uint32_t fallback_chip_readl(const chipaddr addr); void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); +struct par_programmer { + void (*chip_writeb) (uint8_t val, chipaddr addr); + void (*chip_writew) (uint16_t val, chipaddr addr); + void (*chip_writel) (uint32_t val, chipaddr addr); + void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); + uint8_t (*chip_readb) (const chipaddr addr); + uint16_t (*chip_readw) (const chipaddr addr); + uint32_t (*chip_readl) (const chipaddr addr); + void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); +}; +extern const struct par_programmer *par_programmer; +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); /* dummyflasher.c */ #if CONFIG_DUMMY == 1 @@ -634,10 +639,6 @@ uint8_t serprog_chip_readb(const chipaddr addr); void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); void serprog_delay(int usecs); -int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, - unsigned char *readarr); -int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); #endif /* serial.c */ Modified: trunk/satamv.c ============================================================================== --- trunk/satamv.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/satamv.c Thu Nov 10 00:40:00 2011 (r1463) @@ -41,6 +41,17 @@ #define PCI_BAR2_CONTROL 0x00c08 #define GPIO_PORT_CONTROL 0x104f0 +static const struct par_programmer par_programmer_satamv = { + .chip_readb = satamv_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satamv_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int satamv_shutdown(void *data) { physunmap(mv_bar, 0x20000); @@ -137,11 +148,10 @@ mv_iobar = tmp & 0xffff; msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar); - buses_supported = BUS_PARALLEL; - /* 512 kByte with two 8-bit latches, and * 4 MByte with additional 3-bit latch. */ max_rom_decode.parallel = 4 * 1024 * 1024; + register_par_programmer(&par_programmer_satamv, BUS_PARALLEL); return 0; Modified: trunk/satasii.c ============================================================================== --- trunk/satasii.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/satasii.c Thu Nov 10 00:40:00 2011 (r1463) @@ -42,6 +42,17 @@ {}, }; +static const struct par_programmer par_programmer_satasii = { + .chip_readb = satasii_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satasii_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + static int satasii_shutdown(void *data) { physunmap(sii_bar, SATASII_MEMMAP_SIZE); @@ -76,10 +87,11 @@ if ((id != 0x0680) && (!(pci_mmio_readl(sii_bar) & (1 << 26)))) msg_pinfo("Warning: Flash seems unconnected.\n"); - buses_supported = BUS_PARALLEL; - if (register_shutdown(satasii_shutdown, NULL)) return 1; + + register_par_programmer(&par_programmer_satasii, BUS_PARALLEL); + return 0; } Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/serprog.c Thu Nov 10 00:40:00 2011 (r1463) @@ -299,6 +299,11 @@ return 0; } +static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, + int len); static struct spi_programmer spi_programmer_serprog = { .type = SPI_CONTROLLER_SERPROG, .max_data_read = MAX_DATA_READ_UNLIMITED, @@ -309,6 +314,19 @@ .write_256 = default_spi_write_256, }; +static const struct par_programmer par_programmer_serprog = { + .chip_readb = serprog_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = serprog_chip_readn, + .chip_writeb = serprog_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +static enum chipbustype serprog_buses_supported = BUS_NONE; + int serprog_init(void) { uint16_t iface; @@ -400,41 +418,45 @@ if (sp_docommand(S_CMD_Q_IFACE, 0, NULL, 2, &iface)) { msg_perr("Error: NAK to query interface version\n"); - exit(1); + return 1; } if (iface != 1) { msg_perr("Error: Unknown interface version: %d\n", iface); - exit(1); + return 1; } msg_pdbg(MSGHEADER "Interface version ok.\n"); if (sp_docommand(S_CMD_Q_CMDMAP, 0, NULL, 32, sp_cmdmap)) { msg_perr("Error: query command map not supported\n"); - exit(1); + return 1; } sp_check_avail_automatic = 1; - + /* FIXME: This assumes that serprog device bustypes are always + * identical with flashrom bustype enums and that they all fit + * in a single byte. + */ if (sp_docommand(S_CMD_Q_BUSTYPE, 0, NULL, 1, &c)) { msg_perr("Warning: NAK to query supported buses\n"); c = BUS_NONSPI; /* A reasonable default for now. */ } - buses_supported = c; + serprog_buses_supported = c; + msg_pdbg(MSGHEADER "Bus support: parallel=%s, LPC=%s, FWH=%s, SPI=%s\n", (c & BUS_PARALLEL) ? "on" : "off", (c & BUS_LPC) ? "on" : "off", (c & BUS_FWH) ? "on" : "off", (c & BUS_SPI) ? "on" : "off"); /* Check for the minimum operational set of commands. */ - if (buses_supported & BUS_SPI) { + if (serprog_buses_supported & BUS_SPI) { uint8_t bt = BUS_SPI; if (sp_check_commandavail(S_CMD_O_SPIOP) == 0) { msg_perr("Error: SPI operation not supported while the " "bustype is SPI\n"); - exit(1); + return 1; } /* Success of any of these commands is optional. We don't need the programmer to tell us its limits, but if it doesn't, we @@ -461,40 +483,39 @@ spi_programmer_serprog.max_data_read = v; msg_pdbg(MSGHEADER "Maximum read-n length is %d\n", v); } - bt = buses_supported; + bt = serprog_buses_supported; sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL); - register_spi_programmer(&spi_programmer_serprog); } - if (buses_supported & BUS_NONSPI) { + if (serprog_buses_supported & BUS_NONSPI) { if (sp_check_commandavail(S_CMD_O_INIT) == 0) { msg_perr("Error: Initialize operation buffer " "not supported\n"); - exit(1); + return 1; } if (sp_check_commandavail(S_CMD_O_DELAY) == 0) { msg_perr("Error: Write to opbuf: " "delay not supported\n"); - exit(1); + return 1; } /* S_CMD_O_EXEC availability checked later. */ if (sp_check_commandavail(S_CMD_R_BYTE) == 0) { msg_perr("Error: Single byte read not supported\n"); - exit(1); + return 1; } /* This could be translated to single byte reads (if missing), * but now we don't support that. */ if (sp_check_commandavail(S_CMD_R_NBYTES) == 0) { msg_perr("Error: Read n bytes not supported\n"); - exit(1); + return 1; } if (sp_check_commandavail(S_CMD_O_WRITEB) == 0) { msg_perr("Error: Write to opbuf: " "write byte not supported\n"); - exit(1); + return 1; } if (sp_docommand(S_CMD_Q_WRNMAXLEN, 0, NULL, 3, rbuf)) { @@ -513,7 +534,7 @@ if (!sp_write_n_buf) { msg_perr("Error: cannot allocate memory for " "Write-n buffer\n"); - exit(1); + return 1; } sp_write_n_bytes = 0; } @@ -551,12 +572,12 @@ if (sp_check_commandavail(S_CMD_O_EXEC) == 0) { msg_perr("Error: Execute operation buffer not " "supported\n"); - exit(1); + return 1; } if (sp_docommand(S_CMD_O_INIT, 0, NULL, 0, NULL)) { msg_perr("Error: NAK to initialize operation buffer\n"); - exit(1); + return 1; } if (sp_docommand(S_CMD_Q_OPBUF, 0, NULL, 2, @@ -572,6 +593,11 @@ sp_streamed_transmit_ops = 0; sp_streamed_transmit_bytes = 0; sp_opbuf_usage = 0; + if (serprog_buses_supported & BUS_SPI) + register_spi_programmer(&spi_programmer_serprog); + if (serprog_buses_supported & BUS_NONSPI) + register_par_programmer(&par_programmer_serprog, + serprog_buses_supported & BUS_NONSPI); return 0; } @@ -766,7 +792,7 @@ sp_prev_was_write = 0; } -int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { @@ -796,7 +822,7 @@ * the advantage that it is much faster for most chips, but breaks those with * non-contiguous address space (like AT45DB161D). When spi_read_chunked is * fixed this method can be removed. */ -int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { int i; int cur_len; Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Tue Nov 8 12:55:24 2011 (r1462) +++ trunk/wbsio_spi.c Thu Nov 10 00:40:00 2011 (r1463) @@ -82,10 +82,10 @@ msg_pspew("\nwbsio_spibase = 0x%x\n", wbsio_spibase); - register_spi_programmer(&spi_programmer_wbsio); msg_pdbg("%s: Winbond saved on 4 register bits so max chip size is " "1024 kB!\n", __func__); max_rom_decode.spi = 1024 * 1024; + register_spi_programmer(&spi_programmer_wbsio); return 0; }

1 0

Re: [flashrom] [PATCH 2/2] ichspi: add support for Intel Hardware Sequencing
by Carl-Daniel Hailfinger 08 Nov '11

08 Nov '11

Am 26.10.2011 15:35 schrieb Stefan Tauner: > Based on the new opaque programmer framework this patch adds support > for Intel Hardware Sequencing on ICH8 and its successors. > > By default (or when setting the ich_spi_mode option to auto) > the module tries to use swseq and only activates hwseq if need be: > - if important opcodes are inaccessible due to lockdown > - if more than one flash chip is attached. > The other options (swseq, hwseq) select the respective mode (if possible). > > A general description of Hardware Sequencing can be found in this blog entry: > http://blogs.coreboot.org/blog/2011/06/11/gsoc-2011-flashrom-part-1/ > > TODO: adding real documentation when we have a directory for it > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> with a few small comments. > --- > flashrom.8 | 20 +++++ > ichspi.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- > 2 files changed, 283 insertions(+), 5 deletions(-) > > diff --git a/flashrom.8 b/flashrom.8 > index a8f4660..66cde4f 100644 > --- a/flashrom.8 > +++ b/flashrom.8 > @@ -303,6 +303,26 @@ is the I/O port number (must be a multiple of 8). In the unlikely case > flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug > report so we can diagnose the problem. > .sp > +If you have an Intel chipset with an ICH8 or later southbridge with SPI flash > +attached, and if a valid descriptor was written to it (e.g. by the vendor), the > +chipset provides an alternative way to access the flash chip(s) named > +.BR "Hardware Sequencing" . > +It is much simpler than the normal access method (called > +.BR "Software Sequencing" ")," > +but does not allow the software to choose the SPI commands to be sent. > +You can use the > +.sp > +.B " flashrom \-p internal:ich_spi_mode=value" > +.sp > +syntax where value can be > +.BR auto ", " swseq " or " hwseq . > +By default > +.RB "(or when setting " ich_spi_mode=auto ) > +the module tries to use swseq and only activates hwseq if need be (e.g. if > +important opcodes are inaccessible due to lockdown; or if more than one flash > +chip is attached). The other options (swseq, hwseq) select the respective mode > +(if possible). > +.sp > If you have an Intel chipset with an ICH6 or later southbridge and if you want > to set specific IDSEL values for a non-default flash chip or an embedded > controller (EC), you can use the > diff --git a/ichspi.c b/ichspi.c > index bc03554..1d5dd34 100644 > --- a/ichspi.c > +++ b/ichspi.c > @@ -575,6 +575,25 @@ static int program_opcodes(int ich_generation, OPCODES *op, int enable_undo) > return 0; > } > > +/* Returns true if the most important opcodes are accessible. */ You assume that some erase opcode will be available if BYTE_PROGRAM is available. I think that assumption is reasonable, but it could be documented in this comment above the function. > +static int ich_check_opcodes() > +{ > + uint8_t ops[] = { > + JEDEC_READ, > + JEDEC_BYTE_PROGRAM, > + JEDEC_RDSR, > + 0 > + }; > + int i = 0; > + while (ops[i] != 0) { > + msg_pspew("checking for opcode 0x%02x\n", ops[i]); > + if (find_opcode(curopcodes, ops[i]) == -1) > + return 0; > + i++; > + } > + return 1; > +} > + > /* > * Try to set BBAR (BIOS Base Address Register), but read back the value in case > * it didn't stick. > @@ -1325,6 +1525,14 @@ static const struct spi_programmer spi_programmer_ich9 = { > .write_256 = default_spi_write_256, > }; > > +static const struct opaque_programmer opaque_programmer_ich_hwseq = { > + .max_data_read = 64, > + .max_data_write = 64, > + .probe = ich_hwseq_probe, > + .read = ich_hwseq_read, > + .write = ich_hwseq_write, Please add ich_hwseq_block_erase here. > +}; > + > int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, > int ich_generation) > { > @@ -1332,7 +1540,14 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, > uint8_t old, new; > uint16_t spibar_offset, tmp2; > uint32_t tmp; > + char *arg; > int desc_valid = 0; > + struct ich_descriptors desc = {{ 0 }}; > + enum ich_spi_mode { > + ich_auto, > + ich_hwseq, > + ich_swseq > + } ich_spi_mode = ich_auto; > > switch (ich_generation) { > case 7: > @@ -1399,6 +1614,22 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, > case 9: > case 10: > default: /* Future version might behave the same */ > + arg = extract_programmer_param("ich_spi_mode"); > + if (arg && !strcmp(arg, "hwseq")) { > + ich_spi_mode = ich_hwseq; > + msg_pspew("user selected hwseq\n"); > + } else if (arg && !strcmp(arg, "swseq")) { > + ich_spi_mode = ich_swseq; > + msg_pspew("user selected swseq\n"); > + } else if (arg && !strcmp(arg, "auto")) { > + msg_pspew("user selected auto\n"); > + ich_spi_mode = ich_auto; > + } else if (arg && !strlen(arg)) > + msg_pinfo("Missing argument for ich_spi_mode.\n"); > + else if (arg) > + msg_pinfo("Unknown argument for ich_spi_mode: %s\n", arg); We should return an error all the way up to programmer init for both cases (and clean up everything). I know that this is a complicated code path, so if you decide not to fail programmer init here, please add a comment like the one below: /* FIXME: Return an error to programmer_init. */ > + free(arg); > + > tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS); > msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2); > prettyprint_ich9_reg_hsfs(tmp2); > @@ -1484,14 +1715,41 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, > > msg_pdbg("\n"); > if (desc_valid) { > - struct ich_descriptors desc = {{ 0 }}; > if (read_ich_descriptors_via_fdo(ich_spibar, &desc) == > ICH_RET_OK) > prettyprint_ich_descriptors(CHIPSET_ICH_UNKNOWN, > &desc); > + /* If the descriptor is valid and indicates multiple > + * flash devices we need to use hwseq to be able to > + * access the second flash device. > + */ > + if (ich_spi_mode == ich_auto && desc.content.NC != 0) { > + msg_pinfo("Enabling hardware sequencing due to " > + "multiple flash chips detected.\n"); > + ich_spi_mode = ich_hwseq; > + } > + } > + > + if (ich_spi_mode == ich_auto && ichspi_lock && > + !ich_check_opcodes()) { > + msg_pinfo("Enabling hardware sequencing because " > + "some important opcodes are locked.\n"); > + ich_spi_mode = ich_hwseq; > + } > + > + if (ich_spi_mode == ich_hwseq) { > + if (!desc_valid) { > + msg_perr("Hardware sequencing was requested " > + "but the flash descriptor is not " > + "valid. Aborting.\n"); > + return 1; Can you check that this indeed causes flashrom to return an error from programmer_init? Chipset init IIRC ignores most errors unless they are somehow declared to be fatal. > + } > + hwseq_data.size_comp0 = getFCBA_component_density(&desc, 0); > + hwseq_data.size_comp1 = getFCBA_component_density(&desc, 1); > + register_opaque_programmer(&opaque_programmer_ich_hwseq); > + } else { > + register_spi_programmer(&spi_programmer_ich9); > } > - register_spi_programmer(&spi_programmer_ich9); > - ich_init_opcodes(); > break; > } > Regards, Carl-Daniel -- http://www.hailfinger.org/

2 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom