- flashrom - mail.coreboot.org

[PATCH] ft2232_spi: fix arm-usb-ocd and arm-usb-ocd-h
by Paul Fertser 20 Dec '11

20 Dec '11

These devices have an additional output buffer which is activated only by pulling ADBUS4 low. This patch was real-life tested with arm-usb-ocd; arm-usb-ocd-h should be the same (as it shares the same documentation). Signed-off-by: Paul Fertser <fercerpav(a)gmail.com> --- ft2232_spi.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/ft2232_spi.c b/ft2232_spi.c index 8d89ea1..6dcf855 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -202,6 +202,8 @@ int ft2232_spi_init(void) ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_OCD_PID; ft2232_interface = INTERFACE_A; + cs_bits = 0x08; + pindir = 0x1b; } else if (!strcasecmp(arg, "arm-usb-tiny")) { ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_TINY_PID; @@ -210,6 +212,8 @@ int ft2232_spi_init(void) ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_OCD_H_PID; ft2232_interface = INTERFACE_A; + cs_bits = 0x08; + pindir = 0x1b; } else if (!strcasecmp(arg, "arm-usb-tiny-h")) { ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_TINY_H_PID; -- 1.7.7

3 2

[commit] r1478 - trunk
by repository service 20 Dec '11

20 Dec '11

Author: hailfinger Date: Tue Dec 20 03:08:14 2011 New Revision: 1478 URL: http://flashrom.org/trac/flashrom/changeset/1478 Log: ft2232_spi: fix arm-usb-ocd and arm-usb-ocd-h These devices have an additional output buffer which is activated only by pulling ADBUS4 low. This patch was real-life tested with arm-usb-ocd; arm-usb-ocd-h should be the same (as it shares the same documentation). Signed-off-by: Paul Fertser <fercerpav(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Tue Dec 20 02:54:19 2011 (r1477) +++ trunk/ft2232_spi.c Tue Dec 20 03:08:14 2011 (r1478) @@ -204,6 +204,8 @@ ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_OCD_PID; ft2232_interface = INTERFACE_A; + cs_bits = 0x08; + pindir = 0x1b; } else if (!strcasecmp(arg, "arm-usb-tiny")) { ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_TINY_PID; @@ -212,6 +214,8 @@ ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_OCD_H_PID; ft2232_interface = INTERFACE_A; + cs_bits = 0x08; + pindir = 0x1b; } else if (!strcasecmp(arg, "arm-usb-tiny-h")) { ft2232_vid = OLIMEX_VID; ft2232_type = OLIMEX_ARM_TINY_H_PID;

1 0

dediprog speedup
by Thomas Kurkowski 20 Dec '11

20 Dec '11

http://paste.flashrom.org/view.php?id=919 -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de

2 1

[PATCH] Implement unknown Dediprog commands
by Carl-Daniel Hailfinger 20 Dec '11

20 Dec '11

Secret knowledge is cool, but public knowledge is better. Implement all Dediprog commands found in USB traces, even if their purpose is not yet known. Annotate unknown commands with info about the call sequence they are embedded in and the firmware version of the log. Add a new shutdown command for firmware 5.x. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-dediprog_unknown_commands/dediprog.c =================================================================== --- flashrom-dediprog_unknown_commands/dediprog.c (Revision 1232) +++ flashrom-dediprog_unknown_commands/dediprog.c (Arbeitskopie) @@ -27,6 +27,7 @@ #define DEFAULT_TIMEOUT 3000 static usb_dev_handle *dediprog_handle; +static int dediprog_firmwareversion; #if 0 /* Might be useful for other pieces of code as well. */ @@ -228,6 +229,7 @@ fw[1], fw[2]); return 1; } + dediprog_firmwareversion = fw[0]; return 0; } @@ -253,6 +255,32 @@ return 0; } +#if 0 +/* Something. + * Present in eng_detect_blink.log with firmware 3.1.8 + * Always preceded by Command Receive Device String + */ +static int dediprog_command_b(void) +{ + int ret; + char buf[0x3]; + + memset(buf, 0, sizeof(buf)); + ret = usb_control_msg(dediprog_handle, 0xc3, 0x7, 0x0, 0xef00, buf, 0x3, DEFAULT_TIMEOUT); + if (ret < 0) { + msg_perr("Command B failed (%s)!\n", usb_strerror()); + return 1; + } + if ((ret != 0x3) || (buf[0] != 0xff) || (buf[1] != 0xff) || + (buf[2] != 0xff)) { + msg_perr("Unexpected response to Command B!\n"); + return 1; + } + + return 0; +} +#endif + /* Command C is only sent after dediprog_check_devicestring, but not after every * invocation of dediprog_check_devicestring. It is only sent after the first * dediprog_command_a(); dediprog_check_devicestring() sequence in each session. @@ -264,7 +292,7 @@ ret = usb_control_msg(dediprog_handle, 0x42, 0x4, 0x0, 0x0, NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Unexpected response to Command C!\n"); + msg_perr("Command C failed (%s)!\n", usb_strerror()); return 1; } return 0; @@ -274,6 +302,7 @@ /* Very strange. Seems to be a programmer keepalive or somesuch. * Wait unsuccessfully for timeout ms to read one byte. * Is usually called after setting voltage to 0. + * Present in all logs with Firmware 2.1.1 and 3.1.8 */ static int dediprog_command_f(int timeout) { @@ -282,14 +311,90 @@ memset(buf, 0, sizeof(buf)); ret = usb_control_msg(dediprog_handle, 0xc2, 0x11, 0xff, 0xff, buf, 0x1, timeout); + /* This check is most probably wrong. Command F always causes a timeout + * in the logs, so we should check for timeout instead of checking for + * success. + */ + if (ret != 0x1) { + msg_perr("Command F failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Start/stop blinking? + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command J + */ +static int dediprog_command_g(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x03, NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Unexpected response to Command F!\n"); + msg_perr("Command G failed (%s)!\n", usb_strerror()); return 1; } return 0; } + +/* Something. + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String + * Always followed by Command Set SPI Voltage nonzero + */ +static int dediprog_command_h(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x05, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command H failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} #endif +/* Shutdown for firmware 5.x? + * Present in all logs with firmware 5.1.5 + * Often preceded by a SPI operation (Command Read SPI Bulk or Receive SPI) + * Always followed by Command Set SPI Voltage 0x0000 + */ +static int dediprog_command_i(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x06, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command I failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +#if 0 +/* Start/stop blinking? + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String on 5.1.5 + * Always followed by Command Set SPI Voltage nonzero on 5.1.5 + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command B in eng_detect_blink.log + * Followed by Command G in eng_detect_blink.log + */ +static int dediprog_command_j(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x07, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command J failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} +#endif + static int parse_voltage(char *voltage) { char *tmp = NULL; @@ -445,9 +550,11 @@ /* URB 136 is just URB 9. */ /* URB 137 is just URB 11. */ - /* Command I is probably Start Bulk Read. Data is u16 blockcount, u16 blocksize. */ - /* Command J is probably Start Bulk Write. Data is u16 blockcount, u16 blocksize. */ - /* Bulk transfer sizes for Command I/J are always 512 bytes, rest is filled with 0xff. */ + /* Command Start Bulk Read. Data is u16 blockcount, u16 blocksize. */ + /* Command Start Bulk Write. Data is u16 blockcount, u16 blocksize. */ + /* Bulk transfer sizes for Command Start Bulk Read/Write are always + * 512 bytes, rest is filled with 0xff. + */ return 0; } @@ -457,6 +564,10 @@ { msg_pspew("%s\n", __func__); + /* Shutdown on firmware 5.x */ + if (dediprog_firmwareversion == 5) + if (dediprog_command_i()) + return 1; /* URB 28. Command Set SPI Voltage to 0. */ if (dediprog_set_spi_voltage(0x0)) return 1; -- http://www.hailfinger.org/

2 2

Re: [flashrom] [PATCH] Speed up dediprog writes
by Steven A. Falco 20 Dec '11

20 Dec '11

I have just tested the following patch: http://patchwork.coreboot.org/patch/3469/ which I applied to flashrom r1472. It is fantastic! I can now program and verify a M25P16 in just 15 seconds. Every bit as fast as the Windows app. One comment about the patch. The first change (to lines 30,6) should be removed, because it adds a duplicate copy of the statement "static int dediprog_firmwareversion;" Other than that, the patch looks fine to me. Here is the bit that should be removed from the patch: @@ -30,6 +30,7 @@ static usb_dev_handle *dediprog_handle; static int dediprog_firmwareversion; static int dediprog_endpoint; +static int dediprog_firmwareversion; #if 0 /* Might be useful for other pieces of code as well. */ Therefore: Acked-by: Steven A. Falco <sfalco(a)coincident.com>

2 1

[commit] r1477 - trunk
by repository service 20 Dec '11

20 Dec '11

Author: hailfinger Date: Tue Dec 20 02:54:19 2011 New Revision: 1477 URL: http://flashrom.org/trac/flashrom/changeset/1477 Log: Speed up dediprog SPI page writes All chips which use spi_chip_write_256 should be written at native speed. Chips using spi_chip_write_1 or spi_chip_write_aai will still be slow. Thanks to Steven A. Falco for testing with a ST/Numonyx M25P16. Thanks to David Hendricks for testing with a Winbond W25Q64. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Steven A. Falco <sfalco(a)coincident.com> Modified: trunk/dediprog.c Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Tue Dec 20 01:51:44 2011 (r1476) +++ trunk/dediprog.c Tue Dec 20 02:54:19 2011 (r1477) @@ -299,22 +299,109 @@ return 0; } +/* Bulk write interface, will read multiple page_size byte chunks aligned to page_size bytes. + * @start start address + * @len length + * @return 0 on success, 1 on failure + */ +static int dediprog_spi_bulk_write(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) +{ + int ret; + unsigned int i; + /* USB transfer size must be 512, other sizes will NOT work at all. + * chunksize is the real data size per USB bulk transfer. The remaining + * space in a USB bulk transfer must be filled with 0xff padding. + */ + const unsigned int chunksize = flash->page_size; + const unsigned int count = len / chunksize; + const char count_and_chunk[] = {count & 0xff, + (count >> 8) & 0xff, + chunksize & 0xff, + (chunksize >> 8) & 0xff}; + char usbbuf[512]; + + if ((start % chunksize) || (len % chunksize)) { + msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " + "at flashrom(a)flashrom.org\n", __func__, start, len); + return 1; + } + + /* No idea if the hardware can handle empty writes, so chicken out. */ + if (!len) + return 0; + /* Command Write SPI Bulk. No idea which write command is used on the + * SPI side. + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, + start / 0x10000, (char *)count_and_chunk, + sizeof(count_and_chunk), DEFAULT_TIMEOUT); + if (ret != sizeof(count_and_chunk)) { + msg_perr("Command Write SPI Bulk failed, %i %s!\n", ret, + usb_strerror()); + return 1; + } + + for (i = 0; i < count; i++) { + memset(usbbuf, 0xff, sizeof(usbbuf)); + memcpy(usbbuf, buf + i * chunksize, chunksize); + ret = usb_bulk_write(dediprog_handle, dediprog_endpoint, + usbbuf, 512, + DEFAULT_TIMEOUT); + if (ret != 512) { + msg_perr("SPI bulk write failed, expected %i, got %i " + "%s!\n", 512, ret, usb_strerror()); + return 1; + } + } + + return 0; +} + static int dediprog_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; + const unsigned int chunksize = flash->page_size; + unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; + unsigned int bulklen; dediprog_set_leds(PASS_OFF|BUSY_ON|ERROR_OFF); - /* No idea about the real limit. Maybe 12, maybe more, maybe less. */ - ret = spi_write_chunked(flash, buf, start, len, 12); + if (residue) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, residue); + /* No idea about the real limit. Maybe 12, maybe more. */ + ret = spi_write_chunked(flash, buf, start, residue, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } - if (ret) + /* Round down. */ + bulklen = (len - residue) / chunksize * chunksize; + ret = dediprog_spi_bulk_write(flash, buf + residue, start + residue, + bulklen); + if (ret) { dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); - else - dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return ret; + } - return ret; + len -= residue + bulklen; + if (len) { + msg_pdbg("Slow write for partial block from 0x%x, length 0x%x\n", + start, len); + ret = spi_write_chunked(flash, buf + residue + bulklen, + start + residue + bulklen, len, 12); + if (ret) { + dediprog_set_leds(PASS_OFF|BUSY_OFF|ERROR_ON); + return ret; + } + } + + dediprog_set_leds(PASS_ON|BUSY_OFF|ERROR_OFF); + return 0; } static int dediprog_spi_send_command(struct flashctx *flash, @@ -494,6 +581,76 @@ } return 0; } + +/* Start/stop blinking? + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command J + */ +static int dediprog_command_g(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x03, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command G failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Something. + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String + * Always followed by Command Set SPI Voltage nonzero + */ +static int dediprog_command_h(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x05, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command H failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Shutdown for firmware 5.x? + * Present in all logs with firmware 5.1.5 + * Often preceded by a SPI operation (Command Read SPI Bulk or Receive SPI) + * Always followed by Command Set SPI Voltage 0x0000 + */ +static int dediprog_command_i(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x06, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command I failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} + +/* Start/stop blinking? + * Present in all logs with firmware 5.1.5 + * Always preceded by Command Receive Device String on 5.1.5 + * Always followed by Command Set SPI Voltage nonzero on 5.1.5 + * Present in eng_detect_blink.log with firmware 3.1.8 + * Preceded by Command B in eng_detect_blink.log + * Followed by Command G in eng_detect_blink.log + */ +static int dediprog_command_j(void) +{ + int ret; + + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, 0x07, NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { + msg_perr("Command J failed (%s)!\n", usb_strerror()); + return 1; + } + return 0; +} #endif static int parse_voltage(char *voltage) @@ -558,6 +715,13 @@ { msg_pspew("%s\n", __func__); +#if 0 + /* Shutdown on firmware 5.x */ + if (dediprog_firmwareversion == 5) + if (dediprog_command_i()) + return 1; +#endif + /* URB 28. Command Set SPI Voltage to 0. */ if (dediprog_set_spi_voltage(0x0)) return 1;

1 0

Re: [flashrom] [PATCH] Cross-compilation fixes
by Carl-Daniel Hailfinger 20 Dec '11

20 Dec '11

Am 19.12.2011 23:15 schrieb David Hendricks: > On Fri, Dec 16, 2011 at 11:06 AM, Carl-Daniel Hailfinger < > c-d.hailfinger.devel.2006(a)gmx.net> wrote: > >> Am 09.12.2011 05:02 schrieb David Hendricks: >>> On Thu, Dec 8, 2011 at 12:18 PM, Carl-Daniel Hailfinger < >>> c-d.hailfinger.devel.2006(a)gmx.net> wrote: >>> >>>>> Most likely no arm support? >>>> Indeed, ARM support is missing. I think it is mainy held back by libpci >>>> breakage for which we only have a really hackish workaround. >>> For what it's worth, when I tested the patch earlier it worked on ARM >> with >>> that libpci hack. >> The patch has been tested natively on FreeBSD, MinGW, Linux, >> DragonFlyBSD, with gcc and clang, cross-compiled with clang on Linux for >> Windows, cross-compiled with DJGPP on Linux for DOS, cross-compiled on >> Linux for MinGW, natively on Linux PowerPC, .... >> >> Ack anyone? >> > Acked-by: David Hendricks <dhendrix(a)google.com> Thanks, committed in r1476. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[commit] r1476 - trunk
by repository service 20 Dec '11

20 Dec '11

Author: hailfinger Date: Tue Dec 20 01:51:44 2011 New Revision: 1476 URL: http://flashrom.org/trac/flashrom/changeset/1476 Log: Cross-compilation fixes Switch from host OS detection to target OS detection. Complain about unknown target OS/architecture. Disable annoying format string warnings on DJGPP. Native and cross-compilation now usually just require setting CC. Examples: make CC=i586-pc-msdosdjgpp-gcc make CC="clang -m64" make CC=i686-w64-mingw32-gcc Tested for a boatload of native and cross compilation configurations. There is a new target "make libpayload" in case you don't want to specify all tools by hand. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: David Hendricks <dhendrix(a)google.com> Added: trunk/os.h Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Dec 20 01:19:29 2011 (r1475) +++ trunk/Makefile Tue Dec 20 01:51:44 2011 (r1476) @@ -37,27 +37,40 @@ CFLAGS += -Werror endif -# FIXME We have to differentiate between host and target OS architecture. -OS_ARCH ?= $(shell uname) -ifneq ($(OS_ARCH), SunOS) +# HOST_OS is only used to work around local toolchain issues. +HOST_OS ?= $(shell uname) +ifeq ($(HOST_OS), MINGW32_NT-5.1) +# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". +CC = gcc +endif +ifneq ($(HOST_OS), SunOS) STRIP_ARGS = -s endif -ifeq ($(OS_ARCH), Darwin) + +# Determine the destination processor architecture. +# IMPORTANT: The following line must be placed before TARGET_OS is ever used +# (of course), but should come after any lines setting CC because the line +# below uses CC itself. +override TARGET_OS := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) + +ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include # DirectHW framework can be found in the DirectHW library. LDFLAGS += -framework IOKit -framework DirectHW -L/opt/local/lib -L/usr/local/lib endif -ifeq ($(OS_ARCH), FreeBSD) +ifeq ($(TARGET_OS), FreeBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe CPPFLAGS += -I../libgetopt -I../libpci/include +# DJGPP has odd uint*_t definitions which cause lots of format string warnings. +CPPFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt LIBS += ../libgetopt/libgetopt.a # Bus Pirate and Serprog are not supported under DOS (missing serial support). @@ -84,9 +97,9 @@ endif endif -ifeq ($(OS_ARCH), MINGW32_NT-5.1) -# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". -CC = gcc +# FIXME: Should we check for Cygwin/MSVC as well? +ifeq ($(TARGET_OS), MinGW) +EXEC_SUFFIX := .exe # MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs(). CFLAGS += -Dffs=__builtin_ffs # libusb-win32/libftdi stuff is usually installed in /usr/local. @@ -166,10 +179,7 @@ endif endif -ifeq ($(OS_ARCH), libpayload) -CC:=CC=i386-elf-gcc lpgcc -AR:=i386-elf-ar -RANLIB:=i386-elf-ranlib +ifeq ($(TARGET_OS), libpayload) CPPFLAGS += -DSTANDALONE ifeq ($(CONFIG_DUMMY), yes) UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes @@ -202,10 +212,10 @@ # Determine the destination processor architecture. # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line -# below uses CC itself. In some cases we set CC based on OS_ARCH, see above. -override ARCH := $(strip $(shell LC_ALL=C $(CC) -E arch.h 2>/dev/null | grep -v '^\#')) +# below uses CC itself. +override ARCH := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E arch.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) -ifeq ($(ARCH), "ppc") +ifeq ($(ARCH), ppc) # There's no PCI port I/O support on PPC/PowerPC, yet. ifeq ($(CONFIG_NIC3COM), yes) UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes @@ -348,7 +358,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o -ifeq ($(ARCH),"x86") +ifeq ($(ARCH), x86) PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o wbsio_spi.o mcp6x_spi.o PROGRAMMER_OBJS += ichspi.o ich_descriptors.o else @@ -476,7 +486,7 @@ endif ifeq ($(NEED_NET), yes) -ifeq ($(OS_ARCH), SunOS) +ifeq ($(TARGET_OS), SunOS) LIBS += -lsocket endif endif @@ -485,18 +495,18 @@ CHECK_LIBPCI = yes FEATURE_CFLAGS += -D'NEED_PCI=1' PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o -ifeq ($(OS_ARCH), NetBSD) +ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. LIBS += -lpciutils -lpci # For (i386|x86_64)_iopl(2). LIBS += -l$(shell uname -p) else -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) # FIXME There needs to be a better way to do this LIBS += ../libpci/lib/libpci.a else LIBS += -lpci -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). LIBS += -l$(shell uname -m) endif @@ -564,11 +574,16 @@ echo "found." || ( echo "not found."; \ rm -f .test.c .test$(EXEC_SUFFIX); exit 1) @rm -f .test.c .test$(EXEC_SUFFIX) - @printf "ARCH is " + @printf "Target arch is " @# FreeBSD wc will output extraneous whitespace. - @echo $(ARCH)|wc -l|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + @echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ ( echo "unknown. Aborting."; exit 1) @printf "%s\n" '$(ARCH)' + @printf "Target OS is " + @# FreeBSD wc will output extraneous whitespace. + @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + ( echo "unknown. Aborting."; exit 1) + @printf "%s\n" '$(TARGET_OS)' define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ @@ -684,7 +699,9 @@ @echo Created $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 djgpp-dos: clean - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip WARNERROR=no OS_ARCH=DOS + make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip +libpayload: clean + make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib .PHONY: all clean distclean compiler pciutils features export tarball dos featuresavailable Added: trunk/os.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/os.h Tue Dec 20 01:51:44 2011 (r1476) @@ -0,0 +1,58 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Header file for OS checking. + */ + +// Solaris +#if defined (__sun) && (defined(__i386) || defined(__amd64)) +#define __FLASHROM_OS__ "SunOS" +// OS X +#elif defined(__MACH__) && defined(__APPLE__) +#define __FLASHROM_OS__ "Darwin" +// FreeBSD +#elif defined(__FreeBSD__) +#define __FLASHROM_OS__ "FreeBSD" +// DragonFlyBSD +#elif defined(__DragonFly__) +#define __FLASHROM_OS__ "DragonFlyBSD" +// NetBSD +#elif defined(__NetBSD__) +#define __FLASHROM_OS__ "NetBSD" +// OpenBSD +#elif defined(__OpenBSD__) +#define __FLASHROM_OS__ "OpenBSD" +// DJGPP +#elif defined(__DJGPP__) +#define __FLASHROM_OS__ "DOS" +// MinGW (always has _WIN32 available) +#elif defined(__MINGW32__) +#define __FLASHROM_OS__ "MinGW" +// Cygwin (usually without _WIN32) +#elif defined( __CYGWIN__) +#define __FLASHROM_OS__ "Cygwin" +// libpayload +#elif defined(__LIBPAYLOAD__) +#define __FLASHROM_OS__ "libpayload" +// Linux +#elif defined(__linux__) +#define __FLASHROM_OS__ "Linux" +#endif +__FLASHROM_OS__

1 0

[PATCH] Generic programmer registration: final part
by Carl-Daniel Hailfinger 20 Dec '11

20 Dec '11

This depends on [PATCH] Add struct flashctx * everywhere All programmer types (Parallel, SPI, Opaque) now register themselves into a generic programmer list and probing is now programmer-centric instead of chip-centric. Registering multiple SPI/... masters at the same time is now possible without any problems. Handling multiple flash chips is still unchanged, but now we have the infrastructure to deal with "dual BIOS" and "one flash behind southbridge and one flash behind EC" sanely. A nice side effect is that this patch kills quite a few global variables and improves the situation for libflashrom. Hint for developers: struct {spi,par,opaque}_programmer now have a void *data pointer to store any additional programmer-specific data, e.g. hardware configuratoin info. I'd appreciate tests for the following programmer classes: - mainboard native SPI (ICH SPI, SB600 SPI, VIA SPI) - mainboard native LPC/FWH/Parallel - mainboard native bitbanged SPI (MCP SPI) - mainboard translated Parallel (SuperI/O acts as LPC->Parallel translator) - mainboard translated SPI (SuperI/O acts as LPC->SPI translator) - serprog - external SPI (Bus Pirate/Dediprog/FT2232) - external bitbanged SPI (nicintel_spi, ogp_spi) - external LPC/Parallel (satasii, atahpt, nic3com, nicintel, ...) Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> --- flashrom-register_all_programmers_register_generic/flash.h (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/flash.h (Arbeitskopie) @@ -171,6 +171,7 @@ chipaddr virtual_memory; /* Some flash devices have an additional register space. */ chipaddr virtual_registers; + struct registered_programmer *pgm; }; #define TEST_UNTESTED 0 @@ -224,14 +225,13 @@ write_gran_1byte, write_gran_256bytes, }; -extern enum chipbustype buses_supported; extern int verbose; extern const char flashrom_version[]; extern char *chip_to_probe; void map_flash_registers(struct flashctx *flash); int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_flash(struct flashctx *flash); -int probe_flash(int startchip, struct flashctx *fill_flash, int force); +int probe_flash(struct registered_programmer *pgm, int startchip, struct flashctx *fill_flash, int force); int read_flash_to_file(struct flashctx *flash, const char *filename); int min(int a, int b); int max(int a, int b); @@ -300,2 +300,3 @@ +enum chipbustype get_buses_supported(void); #endif /* !__FLASH_H__ */ --- flashrom-register_all_programmers_register_generic/bitbang_spi.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/bitbang_spi.c (Arbeitskopie) @@ -25,46 +25,43 @@ #include "programmer.h" #include "spi.h" -/* Length of half a clock period in usecs. */ -static int bitbang_spi_half_period; - -static const struct bitbang_spi_master *bitbang_spi_master = NULL; - /* Note that CS# is active low, so val=0 means the chip is active. */ -static void bitbang_spi_set_cs(int val) +static void bitbang_spi_set_cs(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_cs(val); + master->set_cs(val); } -static void bitbang_spi_set_sck(int val) +static void bitbang_spi_set_sck(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_sck(val); + master->set_sck(val); } -static void bitbang_spi_set_mosi(int val) +static void bitbang_spi_set_mosi(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_mosi(val); + master->set_mosi(val); } -static int bitbang_spi_get_miso(void) +static int bitbang_spi_get_miso(const const struct bitbang_spi_master *master) { - return bitbang_spi_master->get_miso(); + return master->get_miso(); } -static void bitbang_spi_request_bus(void) +static void bitbang_spi_request_bus(const const struct bitbang_spi_master *master) { - if (bitbang_spi_master->request_bus) - bitbang_spi_master->request_bus(); + if (master->request_bus) + master->request_bus(); } -static void bitbang_spi_release_bus(void) +static void bitbang_spi_release_bus(const const struct bitbang_spi_master *master) { - if (bitbang_spi_master->release_bus) - bitbang_spi_master->release_bus(); + if (master->release_bus) + master->release_bus(); } -static int bitbang_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int bitbang_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static const struct spi_programmer spi_programmer_bitbang = { .type = SPI_CONTROLLER_BITBANG, @@ -76,8 +73,9 @@ .write_256 = default_spi_write_256, }; -int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod) +int bitbang_spi_init(const struct bitbang_spi_master *master) { + struct spi_programmer pgm = spi_programmer_bitbang; /* BITBANG_SPI_INVALID is 0, so if someone forgot to initialize ->type, * we catch it here. Same goes for missing initialization of bitbanging * functions. @@ -88,80 +86,76 @@ "Please report a bug at flashrom(a)flashrom.org\n"); return 1; } - if (bitbang_spi_master) { - msg_perr("SPI bitbang master already initialized!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; - } - bitbang_spi_master = master; - bitbang_spi_half_period = halfperiod; + pgm.data = master; + register_spi_programmer(&pgm); - register_spi_programmer(&spi_programmer_bitbang); - - /* FIXME: Run bitbang_spi_request_bus here or in programmer init? */ - bitbang_spi_set_cs(1); - bitbang_spi_set_sck(0); - bitbang_spi_set_mosi(0); + /* Only mess with the bus if we're sure nobody else uses it. */ + bitbang_spi_request_bus(master); + bitbang_spi_set_cs(master, 1); + bitbang_spi_set_sck(master, 0); + bitbang_spi_set_mosi(master, 0); + /* FIXME: Release SPI bus here and request it again for each command or + * don't release it now and only release it on programmer shutdown? + */ + bitbang_spi_release_bus(master); return 0; } int bitbang_spi_shutdown(const struct bitbang_spi_master *master) { - if (!bitbang_spi_master) { + if (!master) { msg_perr("Shutting down an uninitialized SPI bitbang master!\n" "Please report a bug at flashrom(a)flashrom.org\n"); return 1; } - if (master != bitbang_spi_master) { - msg_perr("Shutting down a mismatched SPI bitbang master!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; - } /* FIXME: Run bitbang_spi_release_bus here or per command? */ - bitbang_spi_master = NULL; return 0; } -static uint8_t bitbang_spi_readwrite_byte(uint8_t val) +static uint8_t bitbang_spi_rw_byte(const struct bitbang_spi_master *master, + uint8_t val) { uint8_t ret = 0; int i; for (i = 7; i >= 0; i--) { - bitbang_spi_set_mosi((val >> i) & 1); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_sck(1); + bitbang_spi_set_mosi(master, (val >> i) & 1); + programmer_delay(master->half_period); + bitbang_spi_set_sck(master, 1); ret <<= 1; - ret |= bitbang_spi_get_miso(); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_sck(0); + ret |= bitbang_spi_get_miso(master); + programmer_delay(master->half_period); + bitbang_spi_set_sck(master, 0); } return ret; } -static int bitbang_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int bitbang_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int i; + const struct bitbang_spi_master *master = flash->pgm->spi.data; /* FIXME: Run bitbang_spi_request_bus here or in programmer init? * Requesting and releasing the SPI bus is handled in here to allow the * programmer to use its own SPI engine for native accesses. */ - bitbang_spi_request_bus(); - bitbang_spi_set_cs(0); + bitbang_spi_request_bus(master); + bitbang_spi_set_cs(master, 0); for (i = 0; i < writecnt; i++) - bitbang_spi_readwrite_byte(writearr[i]); + bitbang_spi_rw_byte(master, writearr[i]); for (i = 0; i < readcnt; i++) - readarr[i] = bitbang_spi_readwrite_byte(0); + readarr[i] = bitbang_spi_rw_byte(master, 0); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_cs(1); - programmer_delay(bitbang_spi_half_period); + programmer_delay(master->half_period); + bitbang_spi_set_cs(master, 1); + programmer_delay(master->half_period); /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ - bitbang_spi_release_bus(); + bitbang_spi_release_bus(master); return 0; } --- flashrom-register_all_programmers_register_generic/ichspi.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/ichspi.c (Arbeitskopie) @@ -635,7 +635,7 @@ /* Read len bytes from the fdata/spid register into the data array. * - * Note that using len > spi_programmer->max_data_read will return garbage or + * Note that using len > flash->pgm->spi.max_data_read will return garbage or * may even crash. */ static void ich_read_data(uint8_t *data, int len, int reg0_off) @@ -653,7 +653,7 @@ /* Fill len bytes from the data array into the fdata/spid registers. * - * Note that using len > spi_programmer->max_data_write will trash the registers + * Note that using len > flash->pgm->spi.max_data_write will trash the registers * following the data registers. */ static void ich_fill_data(const uint8_t *data, int len, int reg0_off) @@ -960,9 +960,9 @@ uint8_t datalength, uint8_t * data) { /* max_data_read == max_data_write for all Intel/VIA SPI masters */ - uint8_t maxlength = spi_programmer->max_data_read; + uint8_t maxlength = flash->pgm->spi.max_data_read; - if (spi_programmer->type == SPI_CONTROLLER_NONE) { + if (ich_generation == CHIPSET_ICH_UNKNOWN) { msg_perr("%s: unsupported chipset\n", __func__); return -1; } @@ -1296,7 +1296,7 @@ REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS)); while (len > 0) { - block_len = min(len, opaque_programmer->max_data_read); + block_len = min(len, flash->pgm->opaque.max_data_read); ich_hwseq_set_addr(addr); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* set read operation */ @@ -1335,7 +1335,7 @@ while (len > 0) { ich_hwseq_set_addr(addr); - block_len = min(len, opaque_programmer->max_data_write); + block_len = min(len, flash->pgm->opaque.max_data_write); ich_fill_data(buf, block_len, ICH9_REG_FDATA0); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* clear operation */ --- flashrom-register_all_programmers_register_generic/spi25.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/spi25.c (Arbeitskopie) @@ -177,7 +177,7 @@ /* Some SPI controllers do not support commands with writecnt=1 and * readcnt=4. */ - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX: @@ -1103,7 +1103,7 @@ .readarr = NULL, }}; - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX: --- flashrom-register_all_programmers_register_generic/spi.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/spi.c (Arbeitskopie) @@ -30,41 +30,30 @@ #include "programmer.h" #include "spi.h" -const struct spi_programmer spi_programmer_none = { - .type = SPI_CONTROLLER_NONE, - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .command = NULL, - .multicommand = NULL, - .read = NULL, - .write_256 = NULL, -}; - -const struct spi_programmer *spi_programmer = &spi_programmer_none; - int spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - if (!spi_programmer->command) { + if (!flash->pgm->spi.command) { msg_perr("%s called, but SPI is unsupported on this " "hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_programmer->command(flash, writecnt, readcnt, writearr, readarr); + return flash->pgm->spi.command(flash, writecnt, readcnt, + writearr, readarr); } int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds) { - if (!spi_programmer->multicommand) { + if (!flash->pgm->spi.multicommand) { msg_perr("%s called, but SPI is unsupported on this " "hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_programmer->multicommand(flash, cmds); + return flash->pgm->spi.multicommand(flash, cmds); } int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, @@ -98,7 +87,7 @@ int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = spi_programmer->max_data_read; + unsigned int max_data = flash->pgm->spi.max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " @@ -110,7 +99,7 @@ int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = spi_programmer->max_data_write; + unsigned int max_data = flash->pgm->spi.max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " @@ -123,7 +112,7 @@ int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int addrbase = 0; - if (!spi_programmer->read) { + if (!flash->pgm->spi.read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); @@ -149,7 +138,7 @@ "access window.\n"); msg_perr("Read will probably return garbage.\n"); } - return spi_programmer->read(flash, buf, addrbase + start, len); + return flash->pgm->spi.read(flash, buf, addrbase + start, len); } /* @@ -161,14 +150,14 @@ /* real chunksize is up to 256, logical chunksize is 256 */ int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!spi_programmer->write_256) { + if (!flash->pgm->spi.write_256) { msg_perr("%s called, but SPI page write is unsupported on this " "hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_programmer->write_256(flash, buf, start, len); + return flash->pgm->spi.write_256(flash, buf, start, len); } /* @@ -178,7 +167,7 @@ */ uint32_t spi_get_valid_read_addr(struct flashctx *flash) { - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_ICH7: @@ -195,4 +184,7 @@ { - spi_programmer = pgm; - buses_supported |= BUS_SPI; + struct registered_programmer rpgm; + + rpgm.buses_supported = BUS_SPI; + rpgm.spi = *pgm; + register_programmer(&rpgm); } --- flashrom-register_all_programmers_register_generic/programmer.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/programmer.c (Arbeitskopie) @@ -21,19 +21,6 @@ #include "flash.h" #include "programmer.h" -static const struct par_programmer par_programmer_none = { - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, -}; - -const struct par_programmer *par_programmer = &par_programmer_none; - /* No-op shutdown() for programmers which don't need special handling */ int noop_shutdown(void) { @@ -115,4 +102,37 @@ { - par_programmer = pgm; - buses_supported |= buses; + struct registered_programmer rpgm; + + rpgm.buses_supported = buses; + rpgm.par = *pgm; + register_programmer(&rpgm); +} + +/* The limit of 4 is totally arbitrary. */ +#define PROGRAMMERS_MAX 4 +struct registered_programmer registered_programmers[PROGRAMMERS_MAX]; +int registered_programmer_count = 0; + +/* This function copies the struct registered_programmer parameter. */ +int register_programmer(struct registered_programmer *pgm) +{ + if (registered_programmer_count >= PROGRAMMERS_MAX) { + msg_perr("Tried to register more than %i programmer " + "interfaces.\n", PROGRAMMERS_MAX); + return 1; + } + registered_programmers[registered_programmer_count] = *pgm; + registered_programmer_count++; + + return 0; +} + +enum chipbustype get_buses_supported(void) +{ + int i; + enum chipbustype ret = BUS_NONE; + + for (i = 0; i < registered_programmer_count; i++) + ret |= registered_programmers[i].buses_supported; + + return ret; } --- flashrom-register_all_programmers_register_generic/flashrom.c (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/flashrom.c (Arbeitskopie) @@ -46,9 +46,6 @@ static char *programmer_param = NULL; -/* Supported buses for the current programmer. */ -enum chipbustype buses_supported; - /* * Programmers supporting multiple buses can have differing size limits on * each bus. Store the limits for each bus in a common struct. @@ -314,7 +311,6 @@ .fwh = 0xffffffff, .spi = 0xffffffff, }; - buses_supported = BUS_NONE; /* Default to top aligned flash at 4 GB. */ flashbase = 0; /* Registering shutdown functions is now allowed. */ @@ -361,42 +357,42 @@ void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { - par_programmer->chip_writeb(flash, val, addr); + flash->pgm->par.chip_writeb(flash, val, addr); } void chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr) { - par_programmer->chip_writew(flash, val, addr); + flash->pgm->par.chip_writew(flash, val, addr); } void chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr) { - par_programmer->chip_writel(flash, val, addr); + flash->pgm->par.chip_writel(flash, val, addr); } void chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { - par_programmer->chip_writen(flash, buf, addr, len); + flash->pgm->par.chip_writen(flash, buf, addr, len); } uint8_t chip_readb(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readb(flash, addr); + return flash->pgm->par.chip_readb(flash, addr); } uint16_t chip_readw(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readw(flash, addr); + return flash->pgm->par.chip_readw(flash, addr); } uint32_t chip_readl(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readl(flash, addr); + return flash->pgm->par.chip_readl(flash, addr); } void chip_readn(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { - par_programmer->chip_readn(flash, buf, addr, len); + flash->pgm->par.chip_readn(flash, buf, addr, len); } void programmer_delay(int usecs) @@ -938,7 +934,8 @@ return 1; } -int probe_flash(int startchip, struct flashctx *fill_flash, int force) +int probe_flash(struct registered_programmer *pgm, int startchip, + struct flashctx *fill_flash, int force) { const struct flashchip *flash; unsigned long base = 0; @@ -950,11 +947,12 @@ for (flash = flashchips + startchip; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; - buses_common = buses_supported & flash->bustype; + buses_common = pgm->buses_supported & flash->bustype; if (!buses_common) { +#if 0 // Does not really make sense anymore if we use a programmer-centric walk. msg_gspew("Probing for %s %s, %d kB: skipped. ", flash->vendor, flash->name, flash->total_size); - tmp = flashbuses_to_text(buses_supported); + tmp = flashbuses_to_text(get_buses_supported()); msg_gspew("Host bus type %s ", tmp); free(tmp); tmp = flashbuses_to_text(flash->bustype); @@ -962,6 +960,7 @@ tmp); free(tmp); msg_gspew("\n"); +#endif continue; } msg_gdbg("Probing for %s %s, %d kB: ", @@ -977,6 +976,7 @@ /* Start filling in the dynamic data. */ memcpy(fill_flash, flash, sizeof(struct flashchip)); + fill_flash->pgm = pgm; base = flashbase ? flashbase : (0xffffffff - size + 1); fill_flash->virtual_memory = (chipaddr)programmer_map_flash_region("flash chip", base, size); --- flashrom-register_all_programmers_register_generic/programmer.h (Arbeitskopie) +++ flashrom-register_all_programmers_register_generic/programmer.h (Arbeitskopie) @@ -133,6 +133,8 @@ int (*get_miso) (void); void (*request_bus) (void); void (*release_bus) (void); + /* Length of half a clock period in usecs. */ + unsigned int half_period; }; #if CONFIG_INTERNAL == 1 @@ -208,6 +210,7 @@ #if NEED_PCI == 1 /* pcidev.c */ +// FIXME: These need to be local, not global extern uint32_t io_base_addr; extern struct pci_access *pacc; extern struct pci_dev *pcidev_dev; @@ -427,7 +430,7 @@ #endif /* bitbang_spi.c */ -int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod); +int bitbang_spi_init(const struct bitbang_spi_master *master); int bitbang_spi_shutdown(const struct bitbang_spi_master *master); /* buspirate_spi.c */ @@ -452,6 +455,7 @@ uint32_t fwh; uint32_t spi; }; +// FIXME: These need to be local, not global extern struct decode_sizes max_rom_decode; extern int programmer_may_write; extern unsigned long flashbase; @@ -498,7 +502,6 @@ SPI_CONTROLLER_SERPROG, #endif }; -extern const int spi_programmer_count; #define MAX_DATA_UNSPECIFIED 0 #define MAX_DATA_READ_UNLIMITED 64 * 1024 @@ -514,9 +517,9 @@ /* Optimized functions for this programmer */ int (*read)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*write_256)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + void *data; }; -extern const struct spi_programmer *spi_programmer; int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int default_spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds); @@ -570,8 +573,8 @@ int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*erase) (struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen); + void *data; }; -extern const struct opaque_programmer *opaque_programmer; void register_opaque_programmer(const struct opaque_programmer *pgm); /* programmer.c */ @@ -595,9 +598,20 @@ uint16_t (*chip_readw) (const struct flashctx *flash, const chipaddr addr); uint32_t (*chip_readl) (const struct flashctx *flash, const chipaddr addr); void (*chip_readn) (const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); + void *data; }; -extern const struct par_programmer *par_programmer; void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); +struct registered_programmer { + enum chipbustype buses_supported; + union { + struct par_programmer par; + struct spi_programmer spi; + struct opaque_programmer opaque; + }; +}; +extern struct registered_programmer registered_programmers[]; +extern int registered_programmer_count; +int register_programmer(struct registered_programmer *pgm); /* serprog.c */ #if CONFIG_SERPROG == 1 --- flashrom-register_all_programmers_register_generic/ogp_spi.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/ogp_spi.c (Arbeitskopie) @@ -91,6 +91,8 @@ .get_miso = ogp_bitbang_get_miso, .request_bus = ogp_request_spibus, .release_bus = ogp_release_spibus, + /* no delay for now. */ + .half_period = 0, }; static int ogp_spi_shutdown(void *data) @@ -136,8 +138,7 @@ if (register_shutdown(ogp_spi_shutdown, NULL)) return 1; - /* no delay for now. */ - if (bitbang_spi_init(&bitbang_spi_master_ogp, 0)) + if (bitbang_spi_init(&bitbang_spi_master_ogp)) return 1; return 0; --- flashrom-register_all_programmers_register_generic/cli_classic.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/cli_classic.c (Arbeitskopie) @@ -172,7 +172,7 @@ struct flashctx flashes[3]; struct flashctx *fill_flash; const char *name; - int namelen, opt, i; + int namelen, opt, i, j; int startchip = 0, chipcount = 0, option_index = 0, force = 0; #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; @@ -444,17 +444,21 @@ ret = 1; goto out_shutdown; } - tempstr = flashbuses_to_text(buses_supported); + tempstr = flashbuses_to_text(get_buses_supported()); msg_pdbg("This programmer supports the following protocols: %s.\n", tempstr); free(tempstr); - for (i = 0; i < ARRAY_SIZE(flashes); i++) { - startchip = probe_flash(startchip, &flashes[i], 0); - if (startchip == -1) - break; - chipcount++; - startchip++; + for (j = 0; j < registered_programmer_count; j++) { + startchip = 0; + for (i = 0; i < ARRAY_SIZE(flashes); i++) { + startchip = probe_flash(&registered_programmers[j], + startchip, &flashes[i], 0); + if (startchip == -1) + break; + chipcount++; + startchip++; + } } if (chipcount > 1) { @@ -472,6 +476,7 @@ printf("Note: flashrom can never write if the flash " "chip isn't found automatically.\n"); } +#if 0 // FIXME: What happens for a forced chip read if multiple compatible programmers are registered? if (force && read_it && chip_to_probe) { printf("Force read (-f -r -c) requested, pretending " "the chip is there:\n"); @@ -486,6 +491,7 @@ "contain garbage.\n"); return read_flash_to_file(&flashes[0], filename); } +#endif ret = 1; goto out_shutdown; } else if (!chip_to_probe) { @@ -502,7 +508,7 @@ check_chip_supported(fill_flash); size = fill_flash->total_size * 1024; - if (check_max_decode((buses_supported & fill_flash->bustype), size) && + if (check_max_decode((get_buses_supported() & fill_flash->bustype), size) && (!force)) { fprintf(stderr, "Chip is too big for this programmer " "(-V gives details). Use --force to override.\n"); --- flashrom-register_all_programmers_register_generic/nicintel_spi.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/nicintel_spi.c (Arbeitskopie) @@ -137,6 +137,8 @@ .get_miso = nicintel_bitbang_get_miso, .request_bus = nicintel_request_spibus, .release_bus = nicintel_release_spibus, + /* 1 usec halfperiod delay for now. */ + .half_period = 1, }; static int nicintel_spi_shutdown(void *data) @@ -181,8 +183,7 @@ if (register_shutdown(nicintel_spi_shutdown, NULL)) return 1; - /* 1 usec halfperiod delay for now. */ - if (bitbang_spi_init(&bitbang_spi_master_nicintel, 1)) + if (bitbang_spi_init(&bitbang_spi_master_nicintel)) return 1; return 0; --- flashrom-register_all_programmers_register_generic/opaque.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/opaque.c (Arbeitskopie) @@ -30,70 +30,62 @@ #include "chipdrivers.h" #include "programmer.h" -const struct opaque_programmer opaque_programmer_none = { - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .probe = NULL, - .read = NULL, - .write = NULL, - .erase = NULL, -}; - -const struct opaque_programmer *opaque_programmer = &opaque_programmer_none; - int probe_opaque(struct flashctx *flash) { - if (!opaque_programmer->probe) { + if (!flash->pgm->opaque.probe) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 0; } - return opaque_programmer->probe(flash); + return flash->pgm->opaque.probe(flash); } int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!opaque_programmer->read) { + if (!flash->pgm->opaque.read) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->read(flash, buf, start, len); + return flash->pgm->opaque.read(flash, buf, start, len); } int write_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!opaque_programmer->write) { + if (!flash->pgm->opaque.write) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->write(flash, buf, start, len); + return flash->pgm->opaque.write(flash, buf, start, len); } int erase_opaque(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen) { - if (!opaque_programmer->erase) { + if (!flash->pgm->opaque.erase) { msg_perr("%s called before register_opaque_programmer. " "Please report a bug at flashrom(a)flashrom.org\n", __func__); return 1; } - return opaque_programmer->erase(flash, blockaddr, blocklen); + return flash->pgm->opaque.erase(flash, blockaddr, blocklen); } void register_opaque_programmer(const struct opaque_programmer *pgm) { + struct registered_programmer rpgm; + if (!pgm->probe || !pgm->read || !pgm->write || !pgm->erase) { msg_perr("%s called with one of probe/read/write/erase being " "NULL. Please report a bug at flashrom(a)flashrom.org\n", __func__); return; } - opaque_programmer = pgm; - buses_supported |= BUS_PROG; + rpgm.buses_supported = BUS_PROG; + rpgm.opaque = *pgm; + register_programmer(&rpgm); } --- flashrom-register_all_programmers_register_generic/rayer_spi.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/rayer_spi.c (Arbeitskopie) @@ -92,6 +92,8 @@ .set_sck = rayer_bitbang_set_sck, .set_mosi = rayer_bitbang_set_mosi, .get_miso = rayer_bitbang_get_miso, + /* Zero halfperiod delay. */ + .half_period = 0, }; int rayer_spi_init(void) @@ -171,8 +173,7 @@ /* Get the initial value before writing to any line. */ lpt_outbyte = INB(lpt_iobase); - /* Zero halfperiod delay. */ - if (bitbang_spi_init(&bitbang_spi_master_rayer, 0)) + if (bitbang_spi_init(&bitbang_spi_master_rayer)) return 1; return 0; --- flashrom-register_all_programmers_register_generic/mcp6x_spi.c (Revision 1473) +++ flashrom-register_all_programmers_register_generic/mcp6x_spi.c (Arbeitskopie) @@ -98,6 +98,8 @@ .get_miso = mcp6x_bitbang_get_miso, .request_bus = mcp6x_request_spibus, .release_bus = mcp6x_release_spibus, + /* Zero halfperiod delay. */ + .half_period = 0, }; int mcp6x_spi_init(int want_spi) @@ -159,8 +161,7 @@ (status >> MCP6X_SPI_GRANT) & 0x1); mcp_gpiostate = status & 0xff; - /* Zero halfperiod delay. */ - if (bitbang_spi_init(&bitbang_spi_master_mcp6x, 0)) { + if (bitbang_spi_init(&bitbang_spi_master_mcp6x)) { /* This should never happen. */ msg_perr("MCP6X bitbang SPI master init failed!\n"); return 1; -- http://www.hailfinger.org/

2 4

[commit] r1475 - trunk
by repository service 20 Dec '11

20 Dec '11

Author: hailfinger Date: Tue Dec 20 01:19:29 2011 New Revision: 1475 URL: http://flashrom.org/trac/flashrom/changeset/1475 Log: Have all programmer init functions register bus masters/programmers All programmer types (Parallel, SPI, Opaque) now register themselves into a generic programmer list and probing is now programmer-centric instead of chip-centric. Registering multiple SPI/... masters at the same time is now possible without any problems. Handling multiple flash chips is still unchanged, but now we have the infrastructure to deal with "dual BIOS" and "one flash behind southbridge and one flash behind EC" sanely. A nice side effect is that this patch kills quite a few global variables and improves the situation for libflashrom. Hint for developers: struct {spi,par,opaque}_programmer now have a void *data pointer to store any additional programmer-specific data, e.g. hardware configuration info. Note: flashrom -f -c FOO -r forced_read.bin does not work anymore. We have to find an architecturally clean way to solve this. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/bitbang_spi.c trunk/cli_classic.c trunk/flash.h trunk/flashrom.c trunk/ichspi.c trunk/mcp6x_spi.c trunk/nicintel_spi.c trunk/ogp_spi.c trunk/opaque.c trunk/programmer.c trunk/programmer.h trunk/rayer_spi.c trunk/spi.c trunk/spi25.c Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/bitbang_spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -25,42 +25,37 @@ #include "programmer.h" #include "spi.h" -/* Length of half a clock period in usecs. */ -static int bitbang_spi_half_period; - -static const struct bitbang_spi_master *bitbang_spi_master = NULL; - /* Note that CS# is active low, so val=0 means the chip is active. */ -static void bitbang_spi_set_cs(int val) +static void bitbang_spi_set_cs(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_cs(val); + master->set_cs(val); } -static void bitbang_spi_set_sck(int val) +static void bitbang_spi_set_sck(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_sck(val); + master->set_sck(val); } -static void bitbang_spi_set_mosi(int val) +static void bitbang_spi_set_mosi(const const struct bitbang_spi_master *master, int val) { - bitbang_spi_master->set_mosi(val); + master->set_mosi(val); } -static int bitbang_spi_get_miso(void) +static int bitbang_spi_get_miso(const const struct bitbang_spi_master *master) { - return bitbang_spi_master->get_miso(); + return master->get_miso(); } -static void bitbang_spi_request_bus(void) +static void bitbang_spi_request_bus(const const struct bitbang_spi_master *master) { - if (bitbang_spi_master->request_bus) - bitbang_spi_master->request_bus(); + if (master->request_bus) + master->request_bus(); } -static void bitbang_spi_release_bus(void) +static void bitbang_spi_release_bus(const const struct bitbang_spi_master *master) { - if (bitbang_spi_master->release_bus) - bitbang_spi_master->release_bus(); + if (master->release_bus) + master->release_bus(); } static int bitbang_spi_send_command(struct flashctx *flash, @@ -78,67 +73,59 @@ .write_256 = default_spi_write_256, }; -int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod) +#if 0 // until it is needed +static int bitbang_spi_shutdown(const struct bitbang_spi_master *master) { + /* FIXME: Run bitbang_spi_release_bus here or per command? */ + return 0; +} +#endif + +int bitbang_spi_init(const struct bitbang_spi_master *master) +{ + struct spi_programmer pgm = spi_programmer_bitbang; /* BITBANG_SPI_INVALID is 0, so if someone forgot to initialize ->type, * we catch it here. Same goes for missing initialization of bitbanging * functions. */ if (!master || master->type == BITBANG_SPI_INVALID || !master->set_cs || - !master->set_sck || !master->set_mosi || !master->get_miso) { + !master->set_sck || !master->set_mosi || !master->get_miso || + (master->request_bus && !master->release_bus) || + (!master->request_bus && master->release_bus)) { msg_perr("Incomplete SPI bitbang master setting!\n" "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; - } - if (bitbang_spi_master) { - msg_perr("SPI bitbang master already initialized!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; + return ERROR_FLASHROM_BUG; } - bitbang_spi_master = master; - bitbang_spi_half_period = halfperiod; + pgm.data = master; + register_spi_programmer(&pgm); - register_spi_programmer(&spi_programmer_bitbang); - - /* FIXME: Run bitbang_spi_request_bus here or in programmer init? */ - bitbang_spi_set_cs(1); - bitbang_spi_set_sck(0); - bitbang_spi_set_mosi(0); - return 0; -} - -int bitbang_spi_shutdown(const struct bitbang_spi_master *master) -{ - if (!bitbang_spi_master) { - msg_perr("Shutting down an uninitialized SPI bitbang master!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; - } - if (master != bitbang_spi_master) { - msg_perr("Shutting down a mismatched SPI bitbang master!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); - return 1; - } - - /* FIXME: Run bitbang_spi_release_bus here or per command? */ - bitbang_spi_master = NULL; + /* Only mess with the bus if we're sure nobody else uses it. */ + bitbang_spi_request_bus(master); + bitbang_spi_set_cs(master, 1); + bitbang_spi_set_sck(master, 0); + bitbang_spi_set_mosi(master, 0); + /* FIXME: Release SPI bus here and request it again for each command or + * don't release it now and only release it on programmer shutdown? + */ + bitbang_spi_release_bus(master); return 0; } -static uint8_t bitbang_spi_readwrite_byte(uint8_t val) +static uint8_t bitbang_spi_rw_byte(const struct bitbang_spi_master *master, + uint8_t val) { uint8_t ret = 0; int i; for (i = 7; i >= 0; i--) { - bitbang_spi_set_mosi((val >> i) & 1); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_sck(1); + bitbang_spi_set_mosi(master, (val >> i) & 1); + programmer_delay(master->half_period); + bitbang_spi_set_sck(master, 1); ret <<= 1; - ret |= bitbang_spi_get_miso(); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_sck(0); + ret |= bitbang_spi_get_miso(master); + programmer_delay(master->half_period); + bitbang_spi_set_sck(master, 0); } return ret; } @@ -149,23 +136,24 @@ unsigned char *readarr) { int i; + const struct bitbang_spi_master *master = flash->pgm->spi.data; /* FIXME: Run bitbang_spi_request_bus here or in programmer init? * Requesting and releasing the SPI bus is handled in here to allow the * programmer to use its own SPI engine for native accesses. */ - bitbang_spi_request_bus(); - bitbang_spi_set_cs(0); + bitbang_spi_request_bus(master); + bitbang_spi_set_cs(master, 0); for (i = 0; i < writecnt; i++) - bitbang_spi_readwrite_byte(writearr[i]); + bitbang_spi_rw_byte(master, writearr[i]); for (i = 0; i < readcnt; i++) - readarr[i] = bitbang_spi_readwrite_byte(0); + readarr[i] = bitbang_spi_rw_byte(master, 0); - programmer_delay(bitbang_spi_half_period); - bitbang_spi_set_cs(1); - programmer_delay(bitbang_spi_half_period); + programmer_delay(master->half_period); + bitbang_spi_set_cs(master, 1); + programmer_delay(master->half_period); /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ - bitbang_spi_release_bus(); + bitbang_spi_release_bus(master); return 0; } Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/cli_classic.c Tue Dec 20 01:19:29 2011 (r1475) @@ -172,7 +172,7 @@ struct flashctx flashes[3]; struct flashctx *fill_flash; const char *name; - int namelen, opt, i; + int namelen, opt, i, j; int startchip = 0, chipcount = 0, option_index = 0, force = 0; #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; @@ -444,17 +444,21 @@ ret = 1; goto out_shutdown; } - tempstr = flashbuses_to_text(buses_supported); - msg_pdbg("This programmer supports the following protocols: %s.\n", + tempstr = flashbuses_to_text(get_buses_supported()); + msg_pdbg("The following protocols are supported: %s.\n", tempstr); free(tempstr); - for (i = 0; i < ARRAY_SIZE(flashes); i++) { - startchip = probe_flash(startchip, &flashes[i], 0); - if (startchip == -1) - break; - chipcount++; - startchip++; + for (j = 0; j < registered_programmer_count; j++) { + startchip = 0; + for (i = 0; i < ARRAY_SIZE(flashes); i++) { + startchip = probe_flash(&registered_programmers[j], + startchip, &flashes[i], 0); + if (startchip == -1) + break; + chipcount++; + startchip++; + } } if (chipcount > 1) { @@ -472,6 +476,7 @@ printf("Note: flashrom can never write if the flash " "chip isn't found automatically.\n"); } +#if 0 // FIXME: What happens for a forced chip read if multiple compatible programmers are registered? if (force && read_it && chip_to_probe) { printf("Force read (-f -r -c) requested, pretending " "the chip is there:\n"); @@ -486,6 +491,7 @@ "contain garbage.\n"); return read_flash_to_file(&flashes[0], filename); } +#endif ret = 1; goto out_shutdown; } else if (!chip_to_probe) { @@ -502,7 +508,7 @@ check_chip_supported(fill_flash); size = fill_flash->total_size * 1024; - if (check_max_decode((buses_supported & fill_flash->bustype), size) && + if (check_max_decode(fill_flash->pgm->buses_supported & fill_flash->bustype, size) && (!force)) { fprintf(stderr, "Chip is too big for this programmer " "(-V gives details). Use --force to override.\n"); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/flash.h Tue Dec 20 01:19:29 2011 (r1475) @@ -171,6 +171,7 @@ chipaddr virtual_memory; /* Some flash devices have an additional register space. */ chipaddr virtual_registers; + struct registered_programmer *pgm; }; #define TEST_UNTESTED 0 @@ -224,14 +225,13 @@ write_gran_1byte, write_gran_256bytes, }; -extern enum chipbustype buses_supported; extern int verbose; extern const char flashrom_version[]; extern char *chip_to_probe; void map_flash_registers(struct flashctx *flash); int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_flash(struct flashctx *flash); -int probe_flash(int startchip, struct flashctx *fill_flash, int force); +int probe_flash(struct registered_programmer *pgm, int startchip, struct flashctx *fill_flash, int force); int read_flash_to_file(struct flashctx *flash, const char *filename); int min(int a, int b); int max(int a, int b); @@ -256,6 +256,13 @@ /* Something happened that shouldn't happen, we'll abort. */ #define ERROR_FATAL -0xee +#define ERROR_FLASHROM_BUG -200 +/* We reached one of the hardcoded limits of flashrom. This can be fixed by + * increasing the limit of a compile-time allocation or by switching to dynamic + * allocation. + * Note: If this warning is triggered, check first for runaway registrations. + */ +#define ERROR_FLASHROM_LIMIT -201 /* cli_output.c */ /* Let gcc and clang check for correct printf-style format strings. */ @@ -297,4 +304,5 @@ int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds); uint32_t spi_get_valid_read_addr(struct flashctx *flash); +enum chipbustype get_buses_supported(void); #endif /* !__FLASH_H__ */ Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/flashrom.c Tue Dec 20 01:19:29 2011 (r1475) @@ -46,9 +46,6 @@ static char *programmer_param = NULL; -/* Supported buses for the current programmer. */ -enum chipbustype buses_supported; - /* * Programmers supporting multiple buses can have differing size limits on * each bus. Store the limits for each bus in a common struct. @@ -314,7 +311,6 @@ .fwh = 0xffffffff, .spi = 0xffffffff, }; - buses_supported = BUS_NONE; /* Default to top aligned flash at 4 GB. */ flashbase = 0; /* Registering shutdown functions is now allowed. */ @@ -361,44 +357,44 @@ void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { - par_programmer->chip_writeb(flash, val, addr); + flash->pgm->par.chip_writeb(flash, val, addr); } void chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr) { - par_programmer->chip_writew(flash, val, addr); + flash->pgm->par.chip_writew(flash, val, addr); } void chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr) { - par_programmer->chip_writel(flash, val, addr); + flash->pgm->par.chip_writel(flash, val, addr); } void chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { - par_programmer->chip_writen(flash, buf, addr, len); + flash->pgm->par.chip_writen(flash, buf, addr, len); } uint8_t chip_readb(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readb(flash, addr); + return flash->pgm->par.chip_readb(flash, addr); } uint16_t chip_readw(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readw(flash, addr); + return flash->pgm->par.chip_readw(flash, addr); } uint32_t chip_readl(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readl(flash, addr); + return flash->pgm->par.chip_readl(flash, addr); } void chip_readn(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { - par_programmer->chip_readn(flash, buf, addr, len); + flash->pgm->par.chip_readn(flash, buf, addr, len); } void programmer_delay(int usecs) @@ -942,7 +938,8 @@ return 1; } -int probe_flash(int startchip, struct flashctx *fill_flash, int force) +int probe_flash(struct registered_programmer *pgm, int startchip, + struct flashctx *fill_flash, int force) { const struct flashchip *flash; unsigned long base = 0; @@ -954,20 +951,9 @@ for (flash = flashchips + startchip; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; - buses_common = buses_supported & flash->bustype; - if (!buses_common) { - msg_gspew("Probing for %s %s, %d kB: skipped. ", - flash->vendor, flash->name, flash->total_size); - tmp = flashbuses_to_text(buses_supported); - msg_gspew("Host bus type %s ", tmp); - free(tmp); - tmp = flashbuses_to_text(flash->bustype); - msg_gspew("and chip bus type %s are incompatible.", - tmp); - free(tmp); - msg_gspew("\n"); + buses_common = pgm->buses_supported & flash->bustype; + if (!buses_common) continue; - } msg_gdbg("Probing for %s %s, %d kB: ", flash->vendor, flash->name, flash->total_size); if (!flash->probe && !force) { @@ -981,6 +967,7 @@ /* Start filling in the dynamic data. */ memcpy(fill_flash, flash, sizeof(struct flashchip)); + fill_flash->pgm = pgm; base = flashbase ? flashbase : (0xffffffff - size + 1); fill_flash->virtual_memory = (chipaddr)programmer_map_flash_region("flash chip", base, size); Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/ichspi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -635,7 +635,7 @@ /* Read len bytes from the fdata/spid register into the data array. * - * Note that using len > spi_programmer->max_data_read will return garbage or + * Note that using len > flash->pgm->spi.max_data_read will return garbage or * may even crash. */ static void ich_read_data(uint8_t *data, int len, int reg0_off) @@ -653,7 +653,7 @@ /* Fill len bytes from the data array into the fdata/spid registers. * - * Note that using len > spi_programmer->max_data_write will trash the registers + * Note that using len > flash->pgm->spi.max_data_write will trash the registers * following the data registers. */ static void ich_fill_data(const uint8_t *data, int len, int reg0_off) @@ -960,9 +960,9 @@ uint8_t datalength, uint8_t * data) { /* max_data_read == max_data_write for all Intel/VIA SPI masters */ - uint8_t maxlength = spi_programmer->max_data_read; + uint8_t maxlength = flash->pgm->spi.max_data_read; - if (spi_programmer->type == SPI_CONTROLLER_NONE) { + if (ich_generation == CHIPSET_ICH_UNKNOWN) { msg_perr("%s: unsupported chipset\n", __func__); return -1; } @@ -1297,7 +1297,7 @@ REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS)); while (len > 0) { - block_len = min(len, opaque_programmer->max_data_read); + block_len = min(len, flash->pgm->opaque.max_data_read); ich_hwseq_set_addr(addr); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* set read operation */ @@ -1336,7 +1336,7 @@ while (len > 0) { ich_hwseq_set_addr(addr); - block_len = min(len, opaque_programmer->max_data_write); + block_len = min(len, flash->pgm->opaque.max_data_write); ich_fill_data(buf, block_len, ICH9_REG_FDATA0); hsfc = REGREAD16(ICH9_REG_HSFC); hsfc &= ~HSFC_FCYCLE; /* clear operation */ Modified: trunk/mcp6x_spi.c ============================================================================== --- trunk/mcp6x_spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/mcp6x_spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -98,6 +98,7 @@ .get_miso = mcp6x_bitbang_get_miso, .request_bus = mcp6x_request_spibus, .release_bus = mcp6x_release_spibus, + .half_period = 0, }; int mcp6x_spi_init(int want_spi) @@ -159,8 +160,7 @@ (status >> MCP6X_SPI_GRANT) & 0x1); mcp_gpiostate = status & 0xff; - /* Zero halfperiod delay. */ - if (bitbang_spi_init(&bitbang_spi_master_mcp6x, 0)) { + if (bitbang_spi_init(&bitbang_spi_master_mcp6x)) { /* This should never happen. */ msg_perr("MCP6X bitbang SPI master init failed!\n"); return 1; Modified: trunk/nicintel_spi.c ============================================================================== --- trunk/nicintel_spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/nicintel_spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -137,6 +137,7 @@ .get_miso = nicintel_bitbang_get_miso, .request_bus = nicintel_request_spibus, .release_bus = nicintel_release_spibus, + .half_period = 1, }; static int nicintel_spi_shutdown(void *data) @@ -181,8 +182,7 @@ if (register_shutdown(nicintel_spi_shutdown, NULL)) return 1; - /* 1 usec halfperiod delay for now. */ - if (bitbang_spi_init(&bitbang_spi_master_nicintel, 1)) + if (bitbang_spi_init(&bitbang_spi_master_nicintel)) return 1; return 0; Modified: trunk/ogp_spi.c ============================================================================== --- trunk/ogp_spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/ogp_spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -91,6 +91,7 @@ .get_miso = ogp_bitbang_get_miso, .request_bus = ogp_request_spibus, .release_bus = ogp_release_spibus, + .half_period = 0, }; static int ogp_spi_shutdown(void *data) @@ -136,8 +137,7 @@ if (register_shutdown(ogp_spi_shutdown, NULL)) return 1; - /* no delay for now. */ - if (bitbang_spi_init(&bitbang_spi_master_ogp, 0)) + if (bitbang_spi_init(&bitbang_spi_master_ogp)) return 1; return 0; Modified: trunk/opaque.c ============================================================================== --- trunk/opaque.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/opaque.c Tue Dec 20 01:19:29 2011 (r1475) @@ -30,70 +30,37 @@ #include "chipdrivers.h" #include "programmer.h" -const struct opaque_programmer opaque_programmer_none = { - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .probe = NULL, - .read = NULL, - .write = NULL, - .erase = NULL, -}; - -const struct opaque_programmer *opaque_programmer = &opaque_programmer_none; - int probe_opaque(struct flashctx *flash) { - if (!opaque_programmer->probe) { - msg_perr("%s called before register_opaque_programmer. " - "Please report a bug at flashrom(a)flashrom.org\n", - __func__); - return 0; - } - - return opaque_programmer->probe(flash); + return flash->pgm->opaque.probe(flash); } int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!opaque_programmer->read) { - msg_perr("%s called before register_opaque_programmer. " - "Please report a bug at flashrom(a)flashrom.org\n", - __func__); - return 1; - } - return opaque_programmer->read(flash, buf, start, len); + return flash->pgm->opaque.read(flash, buf, start, len); } int write_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!opaque_programmer->write) { - msg_perr("%s called before register_opaque_programmer. " - "Please report a bug at flashrom(a)flashrom.org\n", - __func__); - return 1; - } - return opaque_programmer->write(flash, buf, start, len); + return flash->pgm->opaque.write(flash, buf, start, len); } int erase_opaque(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen) { - if (!opaque_programmer->erase) { - msg_perr("%s called before register_opaque_programmer. " - "Please report a bug at flashrom(a)flashrom.org\n", - __func__); - return 1; - } - return opaque_programmer->erase(flash, blockaddr, blocklen); + return flash->pgm->opaque.erase(flash, blockaddr, blocklen); } -void register_opaque_programmer(const struct opaque_programmer *pgm) +int register_opaque_programmer(const struct opaque_programmer *pgm) { + struct registered_programmer rpgm; + if (!pgm->probe || !pgm->read || !pgm->write || !pgm->erase) { - msg_perr("%s called with one of probe/read/write/erase being " - "NULL. Please report a bug at flashrom(a)flashrom.org\n", + msg_perr("%s called with incomplete programmer definition. " + "Please report a bug at flashrom(a)flashrom.org\n", __func__); - return; + return ERROR_FLASHROM_BUG; } - opaque_programmer = pgm; - buses_supported |= BUS_PROG; + rpgm.buses_supported = BUS_PROG; + rpgm.opaque = *pgm; + return register_programmer(&rpgm); } Modified: trunk/programmer.c ============================================================================== --- trunk/programmer.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/programmer.c Tue Dec 20 01:19:29 2011 (r1475) @@ -21,19 +21,6 @@ #include "flash.h" #include "programmer.h" -static const struct par_programmer par_programmer_none = { - .chip_readb = noop_chip_readb, - .chip_readw = fallback_chip_readw, - .chip_readl = fallback_chip_readl, - .chip_readn = fallback_chip_readn, - .chip_writeb = noop_chip_writeb, - .chip_writew = fallback_chip_writew, - .chip_writel = fallback_chip_writel, - .chip_writen = fallback_chip_writen, -}; - -const struct par_programmer *par_programmer = &par_programmer_none; - /* No-op shutdown() for programmers which don't need special handling */ int noop_shutdown(void) { @@ -52,13 +39,7 @@ { } -/* No-op chip_writeb() for drivers not supporting addr/data pair accesses */ -uint8_t noop_chip_readb(const struct flashctx *flash, const chipaddr addr) -{ - return 0xff; -} - -/* No-op chip_writeb() for drivers not supporting addr/data pair accesses */ +/* No-op chip_writeb() for parallel style drivers not supporting writes */ void noop_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { } @@ -115,8 +96,50 @@ return; } -void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses) +int register_par_programmer(const struct par_programmer *pgm, + const enum chipbustype buses) +{ + struct registered_programmer rpgm; + if (!pgm->chip_writeb || !pgm->chip_writew || !pgm->chip_writel || + !pgm->chip_writen || !pgm->chip_readb || !pgm->chip_readw || + !pgm->chip_readl || !pgm->chip_readn) { + msg_perr("%s called with incomplete programmer definition. " + "Please report a bug at flashrom(a)flashrom.org\n", + __func__); + return ERROR_FLASHROM_BUG; + } + + rpgm.buses_supported = buses; + rpgm.par = *pgm; + return register_programmer(&rpgm); +} + +/* The limit of 4 is totally arbitrary. */ +#define PROGRAMMERS_MAX 4 +struct registered_programmer registered_programmers[PROGRAMMERS_MAX]; +int registered_programmer_count = 0; + +/* This function copies the struct registered_programmer parameter. */ +int register_programmer(struct registered_programmer *pgm) +{ + if (registered_programmer_count >= PROGRAMMERS_MAX) { + msg_perr("Tried to register more than %i programmer " + "interfaces.\n", PROGRAMMERS_MAX); + return ERROR_FLASHROM_LIMIT; + } + registered_programmers[registered_programmer_count] = *pgm; + registered_programmer_count++; + + return 0; +} + +enum chipbustype get_buses_supported(void) { - par_programmer = pgm; - buses_supported |= buses; + int i; + enum chipbustype ret = BUS_NONE; + + for (i = 0; i < registered_programmer_count; i++) + ret |= registered_programmers[i].buses_supported; + + return ret; } Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/programmer.h Tue Dec 20 01:19:29 2011 (r1475) @@ -133,6 +133,8 @@ int (*get_miso) (void); void (*request_bus) (void); void (*release_bus) (void); + /* Length of half a clock period in usecs. */ + unsigned int half_period; }; #if CONFIG_INTERNAL == 1 @@ -208,6 +210,7 @@ #if NEED_PCI == 1 /* pcidev.c */ +// FIXME: These need to be local, not global extern uint32_t io_base_addr; extern struct pci_access *pacc; extern struct pci_dev *pcidev_dev; @@ -427,8 +430,7 @@ #endif /* bitbang_spi.c */ -int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod); -int bitbang_spi_shutdown(const struct bitbang_spi_master *master); +int bitbang_spi_init(const struct bitbang_spi_master *master); /* buspirate_spi.c */ #if CONFIG_BUSPIRATE_SPI == 1 @@ -452,6 +454,7 @@ uint32_t fwh; uint32_t spi; }; +// FIXME: These need to be local, not global extern struct decode_sizes max_rom_decode; extern int programmer_may_write; extern unsigned long flashbase; @@ -498,7 +501,6 @@ SPI_CONTROLLER_SERPROG, #endif }; -extern const int spi_programmer_count; #define MAX_DATA_UNSPECIFIED 0 #define MAX_DATA_READ_UNLIMITED 64 * 1024 @@ -514,15 +516,15 @@ /* Optimized functions for this programmer */ int (*read)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*write_256)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + const void *data; }; -extern const struct spi_programmer *spi_programmer; int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int default_spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds); int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); -void register_spi_programmer(const struct spi_programmer *programmer); +int register_spi_programmer(const struct spi_programmer *programmer); /* ichspi.c */ #if CONFIG_INTERNAL == 1 @@ -570,15 +572,14 @@ int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int (*erase) (struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen); + const void *data; }; -extern const struct opaque_programmer *opaque_programmer; -void register_opaque_programmer(const struct opaque_programmer *pgm); +int register_opaque_programmer(const struct opaque_programmer *pgm); /* programmer.c */ int noop_shutdown(void); void *fallback_map(const char *descr, unsigned long phys_addr, size_t len); void fallback_unmap(void *virt_addr, size_t len); -uint8_t noop_chip_readb(const struct flashctx *flash, const chipaddr addr); void noop_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); void fallback_chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr); void fallback_chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr); @@ -595,9 +596,20 @@ uint16_t (*chip_readw) (const struct flashctx *flash, const chipaddr addr); uint32_t (*chip_readl) (const struct flashctx *flash, const chipaddr addr); void (*chip_readn) (const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); + const void *data; }; -extern const struct par_programmer *par_programmer; -void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); +int register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); +struct registered_programmer { + enum chipbustype buses_supported; + union { + struct par_programmer par; + struct spi_programmer spi; + struct opaque_programmer opaque; + }; +}; +extern struct registered_programmer registered_programmers[]; +extern int registered_programmer_count; +int register_programmer(struct registered_programmer *pgm); /* serprog.c */ #if CONFIG_SERPROG == 1 Modified: trunk/rayer_spi.c ============================================================================== --- trunk/rayer_spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/rayer_spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -92,6 +92,7 @@ .set_sck = rayer_bitbang_set_sck, .set_mosi = rayer_bitbang_set_mosi, .get_miso = rayer_bitbang_get_miso, + .half_period = 0, }; int rayer_spi_init(void) @@ -171,8 +172,7 @@ /* Get the initial value before writing to any line. */ lpt_outbyte = INB(lpt_iobase); - /* Zero halfperiod delay. */ - if (bitbang_spi_init(&bitbang_spi_master_rayer, 0)) + if (bitbang_spi_init(&bitbang_spi_master_rayer)) return 1; return 0; Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/spi.c Tue Dec 20 01:19:29 2011 (r1475) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger + * Copyright (C) 2007, 2008, 2009, 2010, 2011 Carl-Daniel Hailfinger * Copyright (C) 2008 coresystems GmbH * * This program is free software; you can redistribute it and/or modify @@ -30,43 +30,17 @@ #include "programmer.h" #include "spi.h" -const struct spi_programmer spi_programmer_none = { - .type = SPI_CONTROLLER_NONE, - .max_data_read = MAX_DATA_UNSPECIFIED, - .max_data_write = MAX_DATA_UNSPECIFIED, - .command = NULL, - .multicommand = NULL, - .read = NULL, - .write_256 = NULL, -}; - -const struct spi_programmer *spi_programmer = &spi_programmer_none; - int spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - if (!spi_programmer->command) { - msg_perr("%s called, but SPI is unsupported on this " - "hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); - return 1; - } - - return spi_programmer->command(flash, writecnt, readcnt, writearr, + return flash->pgm->spi.command(flash, writecnt, readcnt, writearr, readarr); } int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds) { - if (!spi_programmer->multicommand) { - msg_perr("%s called, but SPI is unsupported on this " - "hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); - return 1; - } - - return spi_programmer->multicommand(flash, cmds); + return flash->pgm->spi.multicommand(flash, cmds); } int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, @@ -104,7 +78,7 @@ int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = spi_programmer->max_data_read; + unsigned int max_data = flash->pgm->spi.max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " @@ -117,7 +91,7 @@ int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = spi_programmer->max_data_write; + unsigned int max_data = flash->pgm->spi.max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " @@ -131,12 +105,6 @@ unsigned int len) { unsigned int addrbase = 0; - if (!spi_programmer->read) { - msg_perr("%s called, but SPI read is unsupported on this " - "hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); - return 1; - } /* Check if the chip fits between lowest valid and highest possible * address. Highest possible address with the current SPI implementation @@ -157,7 +125,7 @@ "access window.\n"); msg_perr("Read will probably return garbage.\n"); } - return spi_programmer->read(flash, buf, addrbase + start, len); + return flash->pgm->spi.read(flash, buf, addrbase + start, len); } /* @@ -170,14 +138,7 @@ int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - if (!spi_programmer->write_256) { - msg_perr("%s called, but SPI page write is unsupported on this " - "hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); - return 1; - } - - return spi_programmer->write_256(flash, buf, start, len); + return flash->pgm->spi.write_256(flash, buf, start, len); } /* @@ -187,7 +148,7 @@ */ uint32_t spi_get_valid_read_addr(struct flashctx *flash) { - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_ICH7: @@ -200,8 +161,22 @@ } } -void register_spi_programmer(const struct spi_programmer *pgm) +int register_spi_programmer(const struct spi_programmer *pgm) { - spi_programmer = pgm; - buses_supported |= BUS_SPI; + struct registered_programmer rpgm; + + if (!pgm->write_256 || !pgm->read || !pgm->command || + !pgm->multicommand || + ((pgm->command == default_spi_send_command) && + (pgm->multicommand == default_spi_send_multicommand))) { + msg_perr("%s called with incomplete programmer definition. " + "Please report a bug at flashrom(a)flashrom.org\n", + __func__); + return ERROR_FLASHROM_BUG; + } + + + rpgm.buses_supported = BUS_SPI; + rpgm.spi = *pgm; + return register_programmer(&rpgm); } Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Sun Dec 18 16:01:24 2011 (r1474) +++ trunk/spi25.c Tue Dec 20 01:19:29 2011 (r1475) @@ -179,7 +179,7 @@ /* Some SPI controllers do not support commands with writecnt=1 and * readcnt=4. */ - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX: @@ -1120,7 +1120,7 @@ .readarr = NULL, }}; - switch (spi_programmer->type) { + switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX:

1 0

Re: [flashrom] ECS K7SEM (V1.0) - OK
by Stefan Tauner 20 Dec '11

20 Dec '11

On Wed, 14 Dec 2011 16:30:51 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > ECS K7SEM (V1.0) success report. > > Board link: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&D… > > BIOS: http://download.ecsusa.com/dlfileecs/bios/mb/k7/k7sem/k7sem_12b.exe > (K7SEM Ver:1.2b 01/27/2003) > > Marcos thanks marcos! i have added the mainboard and marked the chipset as tested locally. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Cross-compilation fixes
by Carl-Daniel Hailfinger 19 Dec '11

19 Dec '11

Am 09.12.2011 05:02 schrieb David Hendricks: > On Thu, Dec 8, 2011 at 12:18 PM, Carl-Daniel Hailfinger < > c-d.hailfinger.devel.2006(a)gmx.net> wrote: > >>> Most likely no arm support? >> Indeed, ARM support is missing. I think it is mainy held back by libpci >> breakage for which we only have a really hackish workaround. > > For what it's worth, when I tested the patch earlier it worked on ARM with > that libpci hack. The patch has been tested natively on FreeBSD, MinGW, Linux, DragonFlyBSD, with gcc and clang, cross-compiled with clang on Linux for Windows, cross-compiled with DJGPP on Linux for DOS, cross-compiled on Linux for MinGW, natively on Linux PowerPC, .... Ack anyone? Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Bios Update
by Marko Preuss 19 Dec '11

19 Dec '11

Hello has this updated ? Output Informations in the teminal marko@marko-desktop:~$ sudo flashrom -E -V flashrom v0.9.4-r1394 on Linux 3.0.0-15-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2480M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 992 us, 10000 myus = 10222 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "ECS" DMI string system-product-name: "GF7100/7050PVT-M3" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "ECS" DMI string baseboard-product-name: "GF7100/7050PVT-M3" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP73" with PCI ID 10de:07d7. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:07d8 at 00:03:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:E, 0x001000-0x001fff:E, 0x002000-0x002fff:E, 0x003000-0x003fff:E, 0x004000-0x004fff:E, 0x005000-0x005fff:E, 0x006000-0x006fff:E, 0x007000-0x007fff:E, 0x008000-0x008fff:E, 0x009000-0x009fff:E, 0x00a000-0x00afff:E, 0x00b000-0x00bfff:E, 0x00c000-0x00cfff:E, 0x00d000-0x00dfff:E, 0x00e000-0x00efff:E, 0x00f000-0x00ffff:E, 0x010000-0x010fff:E, 0x011000-0x011fff:E, 0x012000-0x012fff:E, 0x013000-0x013fff:E, 0x014000-0x014fff:E, 0x015000-0x015fff:E, 0x016000-0x016fff:E, 0x017000-0x017fff:E, 0x018000-0x018fff:E, 0x019000-0x019fff:E, 0x01a000-0x01afff:E, 0x01b000-0x01bfff:E, 0x01c000-0x01cfff:E, 0x01d000-0x01dfff:E, 0x01e000-0x01efff:E, 0x01f000-0x01ffff:E, 0x020000-0x020fff:E, 0x021000-0x021fff:E, 0x022000-0x022fff:E, 0x023000-0x023fff:E, 0x024000-0x024fff:E, 0x025000-0x025fff:E, 0x026000-0x026fff:E, 0x027000-0x027fff:E, 0x028000-0x028fff:E, 0x029000-0x029fff:E, 0x02a000-0x02afff:E, 0x02b000-0x02bfff:E, 0x02c000-0x02cfff:E, 0x02d000-0x02dfff:E, 0x02e000-0x02efff:E, 0x02f000-0x02ffff:E, 0x030000-0x030fff:E, 0x031000-0x031fff:E, 0x032000-0x032fff:E, 0x033000-0x033fff:E, 0x034000-0x034fff:E, 0x035000-0x035fff:E, 0x036000-0x036fff:E, 0x037000-0x037fff:E, 0x038000-0x038fff:E, 0x039000-0x039fff:E, 0x03a000-0x03afff:E, 0x03b000-0x03bfff:E, 0x03c000-0x03cfff:E, 0x03d000-0x03dfff:E, 0x03e000-0x03efff:E, 0x03f000-0x03ffff:E, 0x040000-0x040fff:E, 0x041000-0x041fff:E, 0x042000-0x042fff:E, 0x043000-0x043fff:E, 0x044000-0x044fff:E, 0x045000-0x045fff:E, 0x046000-0x046fff:E, 0x047000-0x047fff:E, 0x048000-0x048fff:E, 0x049000-0x049fff:E, 0x04a000-0x04afff:E, 0x04b000-0x04bfff:E, 0x04c000-0x04cfff:E, 0x04d000-0x04dfff:E, 0x04e000-0x04efff:E, 0x04f000-0x04ffff:E, 0x050000-0x050fff:E, 0x051000-0x051fff:E, 0x052000-0x052fff:E, 0x053000-0x053fff:E, 0x054000-0x054fff:E, 0x055000-0x055fff:E, 0x056000-0x056fff:E, 0x057000-0x057fff:E, 0x058000-0x058fff:E, 0x059000-0x059fff:E, 0x05a000-0x05afff:E, 0x05b000-0x05bfff:E, 0x05c000-0x05cfff:E, 0x05d000-0x05dfff:E, 0x05e000-0x05efff:E, 0x05f000-0x05ffff:E, 0x060000-0x060fff:E, 0x061000-0x061fff:E, 0x062000-0x062fff:E, 0x063000-0x063fff:E, 0x064000-0x064fff:E, 0x065000-0x065fff:E, 0x066000-0x066fff:E, 0x067000-0x067fff:E, 0x068000-0x068fff:E, 0x069000-0x069fff:E, 0x06a000-0x06afff:E, 0x06b000-0x06bfff:E, 0x06c000-0x06cfff:E, 0x06d000-0x06dfff:E, 0x06e000-0x06efff:E, 0x06f000-0x06ffff:E, 0x070000-0x070fff:E, 0x071000-0x071fff:E, 0x072000-0x072fff:E, 0x073000-0x073fff:E, 0x074000-0x074fff:E, 0x075000-0x075fff:E, 0x076000-0x076fff:E, 0x077000-0x077fff:E, 0x078000-0x078fff:E, 0x079000-0x079fff:E, 0x07a000-0x07afff:E, 0x07b000-0x07bfff:E, 0x07c000-0x07cfff:E, 0x07d000-0x07dfff:E, 0x07e000-0x07efff:E, 0x07f000-0x07ffff:E, 0x080000-0x080fff:E, 0x081000-0x081fff:E, 0x082000-0x082fff:E, 0x083000-0x083fff:E, 0x084000-0x084fff:E, 0x085000-0x085fff:E, 0x086000-0x086fff:E, 0x087000-0x087fff:E, 0x088000-0x088fff:E, 0x089000-0x089fff:E, 0x08a000-0x08afff:E, 0x08b000-0x08bfff:E, 0x08c000-0x08cfff:E, 0x08d000-0x08dfff:E, 0x08e000-0x08efff:E, 0x08f000-0x08ffff:E, 0x090000-0x090fff:E, 0x091000-0x091fff:E, 0x092000-0x092fff:E, 0x093000-0x093fff:E, 0x094000-0x094fff:E, 0x095000-0x095fff:E, 0x096000-0x096fff:E, 0x097000-0x097fff:E, 0x098000-0x098fff:E, 0x099000-0x099fff:E, 0x09a000-0x09afff:E, 0x09b000-0x09bfff:E, 0x09c000-0x09cfff:E, 0x09d000-0x09dfff:E, 0x09e000-0x09efff:E, 0x09f000-0x09ffff:E, 0x0a0000-0x0a0fff:E, 0x0a1000-0x0a1fff:E, 0x0a2000-0x0a2fff:E, 0x0a3000-0x0a3fff:E, 0x0a4000-0x0a4fff:E, 0x0a5000-0x0a5fff:E, 0x0a6000-0x0a6fff:E, 0x0a7000-0x0a7fff:E, 0x0a8000-0x0a8fff:E, 0x0a9000-0x0a9fff:E, 0x0aa000-0x0aafff:E, 0x0ab000-0x0abfff:E, 0x0ac000-0x0acfff:E, 0x0ad000-0x0adfff:E, 0x0ae000-0x0aefff:E, 0x0af000-0x0affff:E, 0x0b0000-0x0b0fff:E, 0x0b1000-0x0b1fff:E, 0x0b2000-0x0b2fff:E, 0x0b3000-0x0b3fff:E, 0x0b4000-0x0b4fff:E, 0x0b5000-0x0b5fff:E, 0x0b6000-0x0b6fff:E, 0x0b7000-0x0b7fff:E, 0x0b8000-0x0b8fff:E, 0x0b9000-0x0b9fff:E, 0x0ba000-0x0bafff:E, 0x0bb000-0x0bbfff:E, 0x0bc000-0x0bcfff:E, 0x0bd000-0x0bdfff:E, 0x0be000-0x0befff:E, 0x0bf000-0x0bffff:E, 0x0c0000-0x0c0fff:E, 0x0c1000-0x0c1fff:E, 0x0c2000-0x0c2fff:E, 0x0c3000-0x0c3fff:E, 0x0c4000-0x0c4fff:E, 0x0c5000-0x0c5fff:E, 0x0c6000-0x0c6fff:E, 0x0c7000-0x0c7fff:E, 0x0c8000-0x0c8fff:E, 0x0c9000-0x0c9fff:E, 0x0ca000-0x0cafff:E, 0x0cb000-0x0cbfff:E, 0x0cc000-0x0ccfff:E, 0x0cd000-0x0cdfff:E, 0x0ce000-0x0cefff:E, 0x0cf000-0x0cffff:E, 0x0d0000-0x0d0fff:E, 0x0d1000-0x0d1fff:E, 0x0d2000-0x0d2fff:E, 0x0d3000-0x0d3fff:E, 0x0d4000-0x0d4fff:E, 0x0d5000-0x0d5fff:E, 0x0d6000-0x0d6fff:E, 0x0d7000-0x0d7fff:E, 0x0d8000-0x0d8fff:E, 0x0d9000-0x0d9fff:E, 0x0da000-0x0dafff:E, 0x0db000-0x0dbfff:E, 0x0dc000-0x0dcfff:E, 0x0dd000-0x0ddfff:E, 0x0de000-0x0defff:E, 0x0df000-0x0dffff:E, 0x0e0000-0x0e0fff:E, 0x0e1000-0x0e1fff:E, 0x0e2000-0x0e2fff:E, 0x0e3000-0x0e3fff:E, 0x0e4000-0x0e4fff:E, 0x0e5000-0x0e5fff:E, 0x0e6000-0x0e6fff:E, 0x0e7000-0x0e7fff:E, 0x0e8000-0x0e8fff:E, 0x0e9000-0x0e9fff:E, 0x0ea000-0x0eafff:E, 0x0eb000-0x0ebfff:E, 0x0ec000-0x0ecfff:E, 0x0ed000-0x0edfff:E, 0x0ee000-0x0eefff:E, 0x0ef000-0x0effff:E, 0x0f0000-0x0f0fff:E, 0x0f1000-0x0f1fff:E, 0x0f2000-0x0f2fff:E, 0x0f3000-0x0f3fff:E, 0x0f4000-0x0f4fff:E, 0x0f5000-0x0f5fff:E, 0x0f6000-0x0f6fff:E, 0x0f7000-0x0f7fff:E, 0x0f8000-0x0f8fff:E, 0x0f9000-0x0f9fff:E, 0x0fa000-0x0fafff:E, 0x0fb000-0x0fbfff:E, 0x0fc000-0x0fcfff:E, 0x0fd000-0x0fdfff:E, 0x0fe000-0x0fefff:E, 0x0ff000-0x0fffff:E Erase/write done. marko@marko-desktop:~$ Best Regards

2 1

Re: [flashrom] FAIL: msi ms-7135 (k8n-neo3)
by Jonathan A. Kollasch 19 Dec '11

19 Dec '11

On Mon, Dec 19, 2011 at 05:15:30PM +0000, Owens, Nathan D wrote: > Howdy, > > I've been trying to flash the SST49LF160C on my ms-7135. Fails to verify with the same problem every time (see attached). > > I've tried newer and older versions of flashrom, but always the same thing. > > Oddly, when I use this board's original chip (SST49LF004A/B), flashing verifies without a problem. > > Any ideas? I'm curious, what does the failure pattern look like? The SST49LF080A I sometimes use on my 7135 works fine last I checked. Jonathan Kollasch (That is, write a test pattern to the chip, and then read it back and compare hexdumps after a write failure.)

1 0

FAIL: msi ms-7135 (k8n-neo3)
by Owens, Nathan D 19 Dec '11

19 Dec '11

Howdy, I've been trying to flash the SST49LF160C on my ms-7135. Fails to verify with the same problem every time (see attached). I've tried newer and older versions of flashrom, but always the same thing. Oddly, when I use this board's original chip (SST49LF004A/B), flashing verifies without a problem. Any ideas? Thanks, Nate Owens

1 0

Update Bios 11.10 Oneric
by Marko Preuss 19 Dec '11

19 Dec '11

Hallo This is flashrom - V I will update Bios ? Please help We is the update Befehl ? sudo flashrom - E ? Beste regards marko@marko-desktop:~$ flashrom -V flashrom v0.9.4-r1394 on Linux 3.0.0-15-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2498M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10001 us, 4 myus = 4 us, OK. Initializing internal programmer ERROR: Could not get I/O privileges (Operation not permitted). You need to be root. marko@marko-desktop:~$

1 0

[RFC] Add struct flashchip * everywhere
by Carl-Daniel Hailfinger 18 Dec '11

18 Dec '11

We need a way to identify which registered programmer should be used for a given access. Especially for cases where multiple programmers for the same bus type are registered (e.g. IT87+MCP79 SPI or Dual BIOS solutions), probing has to happen on each programmer. Somehow we have to tell the dispatcher (spi_send_command etc.) this information, and the only way to get the info to the dispatcher is either an ugly global variable which makes dealing with multiple flash chips and multiple bus probing really messy, or we store the info inside struct flashchip. Given that struct flashchip is passed around almost everywhere already, it is the natural location for such information and only very few function prototypes have to be changed to handle this. I have a prototype patch in the queue, but it's only half ready. If there is any interest, I can send the patch as is to give you an option to shoot it down while it is still unfinished. Regards, Carl-Daniel -- http://www.hailfinger.org/

3 10

[commit] r1474 - trunk
by repository service 18 Dec '11

18 Dec '11

Author: hailfinger Date: Sun Dec 18 16:01:24 2011 New Revision: 1474 URL: http://flashrom.org/trac/flashrom/changeset/1474 Log: Add struct flashctx * parameter to all functions accessing flash chips. All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/82802ab.c trunk/a25.c trunk/at25.c trunk/atahpt.c trunk/bitbang_spi.c trunk/buspirate_spi.c trunk/chipdrivers.h trunk/dediprog.c trunk/drkaiser.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.c trunk/ft2232_spi.c trunk/gfxnvidia.c trunk/ichspi.c trunk/internal.c trunk/it85spi.c trunk/it87spi.c trunk/jedec.c trunk/linux_spi.c trunk/m29f400bt.c trunk/nic3com.c trunk/nicintel.c trunk/nicnatsemi.c trunk/nicrealtek.c trunk/pm49fl00x.c trunk/programmer.c trunk/programmer.h trunk/satamv.c trunk/satasii.c trunk/sb600spi.c trunk/serprog.c trunk/sharplhf00l04.c trunk/spi.c trunk/spi25.c trunk/sst28sf040.c trunk/sst49lfxxxc.c trunk/sst_fwhub.c trunk/stm50flw0x0x.c trunk/w29ee011.c trunk/w39.c trunk/wbsio_spi.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/82802ab.c Sun Dec 18 16:01:24 2011 (r1474) @@ -47,18 +47,18 @@ int shifted = (flash->feature_bits & FEATURE_ADDR_SHIFTED) != 0; /* Reset to get a clean state */ - chip_writeb(0xFF, bios); + chip_writeb(flash, 0xFF, bios); programmer_delay(10); /* Enter ID mode */ - chip_writeb(0x90, bios); + chip_writeb(flash, 0x90, bios); programmer_delay(10); - id1 = chip_readb(bios + (0x00 << shifted)); - id2 = chip_readb(bios + (0x01 << shifted)); + id1 = chip_readb(flash, bios + (0x00 << shifted)); + id2 = chip_readb(flash, bios + (0x01 << shifted)); /* Leave ID mode */ - chip_writeb(0xFF, bios); + chip_writeb(flash, 0xFF, bios); programmer_delay(10); @@ -71,8 +71,8 @@ * Read the product ID location again. We should now see normal * flash contents. */ - flashcontent1 = chip_readb(bios + (0x00 << shifted)); - flashcontent2 = chip_readb(bios + (0x01 << shifted)); + flashcontent1 = chip_readb(flash, bios + (0x00 << shifted)); + flashcontent2 = chip_readb(flash, bios + (0x01 << shifted)); if (id1 == flashcontent1) msg_cdbg(", id1 is normal flash content"); @@ -94,15 +94,15 @@ uint8_t status; chipaddr bios = flash->virtual_memory; - chip_writeb(0x70, bios); - if ((chip_readb(bios) & 0x80) == 0) { // it's busy - while ((chip_readb(bios) & 0x80) == 0) ; + chip_writeb(flash, 0x70, bios); + if ((chip_readb(flash, bios) & 0x80) == 0) { // it's busy + while ((chip_readb(flash, bios) & 0x80) == 0) ; } - status = chip_readb(bios); + status = chip_readb(flash, bios); /* Reset to get a clean state */ - chip_writeb(0xFF, bios); + chip_writeb(flash, 0xFF, bios); return status; } @@ -113,7 +113,7 @@ //chipaddr wrprotect = flash->virtual_registers + page + 2; for (i = 0; i < flash->total_size * 1024; i+= flash->page_size) - chip_writeb(0, flash->virtual_registers + i + 2); + chip_writeb(flash, 0, flash->virtual_registers + i + 2); return 0; } @@ -125,11 +125,11 @@ uint8_t status; // clear status register - chip_writeb(0x50, bios + page); + chip_writeb(flash, 0x50, bios + page); // now start it - chip_writeb(0x20, bios + page); - chip_writeb(0xd0, bios + page); + chip_writeb(flash, 0x20, bios + page); + chip_writeb(flash, 0xd0, bios + page); programmer_delay(10); // now let's see what the register is @@ -141,15 +141,16 @@ } /* chunksize is 1 */ -int write_82802ab(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_82802ab(struct flashctx *flash, uint8_t *src, unsigned int start, + unsigned int len) { int i; chipaddr dst = flash->virtual_memory + start; for (i = 0; i < len; i++) { /* transfer data from source to destination */ - chip_writeb(0x40, dst); - chip_writeb(*src++, dst++); + chip_writeb(flash, 0x40, dst); + chip_writeb(flash, *src++, dst++); wait_82802ab(flash); } @@ -164,13 +165,13 @@ int i; /* Clear status register */ - chip_writeb(0x50, bios); + chip_writeb(flash, 0x50, bios); /* Read identifier codes */ - chip_writeb(0x90, bios); + chip_writeb(flash, 0x90, bios); /* Read master lock-bit */ - mcfg = chip_readb(bios + 0x3); + mcfg = chip_readb(flash, bios + 0x3); msg_cdbg("master lock is "); if (mcfg) { msg_cdbg("locked!\n"); @@ -181,7 +182,7 @@ /* Read block lock-bits */ for (i = 0; i < flash->total_size * 1024; i+= (64 * 1024)) { - bcfg = chip_readb(bios + i + 2); // read block lock config + bcfg = chip_readb(flash, bios + i + 2); // read block lock config msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); if (bcfg) { need_unlock = 1; @@ -189,14 +190,14 @@ } /* Reset chip */ - chip_writeb(0xFF, bios); + chip_writeb(flash, 0xFF, bios); /* Unlock: clear block lock-bits, if needed */ if (can_unlock && need_unlock) { msg_cdbg("Unlock: "); - chip_writeb(0x60, bios); - chip_writeb(0xD0, bios); - chip_writeb(0xFF, bios); + chip_writeb(flash, 0x60, bios); + chip_writeb(flash, 0xD0, bios); + chip_writeb(flash, 0xFF, bios); msg_cdbg("Done!\n"); } @@ -220,10 +221,10 @@ wait_82802ab(flash); /* Read identifier codes */ - chip_writeb(0x90, bios); + chip_writeb(flash, 0x90, bios); /* Read master lock-bit */ - mcfg = chip_readb(bios + 0x3); + mcfg = chip_readb(flash, bios + 0x3); msg_cdbg("master lock is "); if (mcfg) { msg_cdbg("locked!\n"); @@ -235,7 +236,7 @@ /* Read block lock-bits, 8 * 8 KB + 15 * 64 KB */ for (i = 0; i < flash->total_size * 1024; i += (i >= (64 * 1024) ? 64 * 1024 : 8 * 1024)) { - bcfg = chip_readb(bios + i + 2); /* read block lock config */ + bcfg = chip_readb(flash, bios + i + 2); /* read block lock config */ msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); if (bcfg) @@ -243,14 +244,14 @@ } /* Reset chip */ - chip_writeb(0xFF, bios); + chip_writeb(flash, 0xFF, bios); /* Unlock: clear block lock-bits, if needed */ if (can_unlock && need_unlock) { msg_cdbg("Unlock: "); - chip_writeb(0x60, bios); - chip_writeb(0xD0, bios); - chip_writeb(0xFF, bios); + chip_writeb(flash, 0x60, bios); + chip_writeb(flash, 0xD0, bios); + chip_writeb(flash, 0xFF, bios); wait_82802ab(flash); msg_cdbg("Done!\n"); } Modified: trunk/a25.c ============================================================================== --- trunk/a25.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/a25.c Sun Dec 18 16:01:24 2011 (r1474) @@ -33,7 +33,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_amic_a25_srwd(status); @@ -49,7 +49,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_amic_a25_srwd(status); @@ -64,7 +64,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_amic_a25_srwd(status); @@ -82,7 +82,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_amic_a25_srwd(status); Modified: trunk/at25.c ============================================================================== --- trunk/at25.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/at25.c Sun Dec 18 16:01:24 2011 (r1474) @@ -61,7 +61,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_atmel_at25_srpl(status); @@ -84,7 +84,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_atmel_at25_srpl(status); @@ -103,7 +103,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " @@ -127,7 +127,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); msg_cdbg("Chip status register: Status Register Write Protect (WPEN) " @@ -151,7 +151,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); spi_prettyprint_status_register_atmel_at25_srpl(status); @@ -168,7 +168,7 @@ uint8_t status; int result; - status = spi_read_status_register(); + status = spi_read_status_register(flash); /* If block protection is disabled, stop here. */ if ((status & (3 << 2)) == 0) return 0; @@ -195,7 +195,7 @@ msg_cerr("spi_write_status_register failed\n"); return result; } - status = spi_read_status_register(); + status = spi_read_status_register(flash); if ((status & (3 << 2)) != 0) { msg_cerr("Block protection could not be disabled!\n"); return 1; @@ -223,7 +223,7 @@ uint8_t status; int result; - status = spi_read_status_register(); + status = spi_read_status_register(flash); /* If block protection is disabled, stop here. */ if ((status & 0x6c) == 0) return 0; @@ -244,7 +244,7 @@ msg_cerr("spi_write_status_register failed\n"); return result; } - status = spi_read_status_register(); + status = spi_read_status_register(flash); if ((status & 0x6c) != 0) { msg_cerr("Block protection could not be disabled!\n"); return 1; @@ -257,7 +257,7 @@ uint8_t status; int result; - status = spi_read_status_register(); + status = spi_read_status_register(flash); /* If block protection is disabled, stop here. */ if ((status & 0x7c) == 0) return 0; @@ -278,7 +278,7 @@ msg_cerr("spi_write_status_register failed\n"); return result; } - status = spi_read_status_register(); + status = spi_read_status_register(flash); if ((status & 0x7c) != 0) { msg_cerr("Block protection could not be disabled!\n"); return 1; Modified: trunk/atahpt.c ============================================================================== --- trunk/atahpt.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/atahpt.c Sun Dec 18 16:01:24 2011 (r1474) @@ -40,6 +40,10 @@ {}, }; +static void atahpt_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t atahpt_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_atahpt = { .chip_readb = atahpt_chip_readb, .chip_readw = fallback_chip_readw, @@ -80,13 +84,15 @@ return 0; } -void atahpt_chip_writeb(uint8_t val, chipaddr addr) +static void atahpt_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); OUTB(val, io_base_addr + BIOS_ROM_DATA); } -uint8_t atahpt_chip_readb(const chipaddr addr) +static uint8_t atahpt_chip_readb(const struct flashctx *flash, + const chipaddr addr) { OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); return INB(io_base_addr + BIOS_ROM_DATA); Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/bitbang_spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -63,8 +63,10 @@ bitbang_spi_master->release_bus(); } -static int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int bitbang_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static const struct spi_programmer spi_programmer_bitbang = { .type = SPI_CONTROLLER_BITBANG, @@ -141,8 +143,10 @@ return ret; } -static int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int bitbang_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int i; Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/buspirate_spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -86,8 +86,11 @@ return 0; } -static int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int buspirate_spi_send_command(struct flashctx *flash, + unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static const struct spi_programmer spi_programmer_buspirate = { .type = SPI_CONTROLLER_BUSPIRATE, @@ -291,8 +294,11 @@ return 0; } -static int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int buspirate_spi_send_command(struct flashctx *flash, + unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { static unsigned char *buf = NULL; unsigned int i = 0; Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/chipdrivers.h Sun Dec 18 16:01:24 2011 (r1474) @@ -33,8 +33,8 @@ int probe_spi_rems(struct flashctx *flash); int probe_spi_res1(struct flashctx *flash); int probe_spi_res2(struct flashctx *flash); -int spi_write_enable(void); -int spi_write_disable(void); +int spi_write_enable(struct flashctx *flash); +int spi_write_disable(struct flashctx *flash); int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); @@ -44,16 +44,16 @@ int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len); -uint8_t spi_read_status_register(void); +uint8_t spi_read_status_register(struct flashctx *flash); int spi_write_status_register(struct flashctx *flash, int status); void spi_prettyprint_status_register_bit(uint8_t status, int bit); void spi_prettyprint_status_register_bp3210(uint8_t status, int bp); void spi_prettyprint_status_register_welwip(uint8_t status); int spi_prettyprint_status_register(struct flashctx *flash); int spi_disable_blockprotect(struct flashctx *flash); -int spi_byte_program(unsigned int addr, uint8_t databyte); -int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len); -int spi_nbyte_read(unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_byte_program(struct flashctx *flash, unsigned int addr, uint8_t databyte); +int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_nbyte_read(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); @@ -95,9 +95,9 @@ /* jedec.c */ uint8_t oddparity(uint8_t val); -void toggle_ready_jedec(chipaddr dst); -void data_polling_jedec(chipaddr dst, uint8_t data); -int write_byte_program_jedec(chipaddr bios, uint8_t *src, +void toggle_ready_jedec(struct flashctx *flash, chipaddr dst); +void data_polling_jedec(struct flashctx *flash, chipaddr dst, uint8_t data); +int write_byte_program_jedec(struct flashctx *flash, chipaddr bios, uint8_t *src, chipaddr dst); int probe_jedec(struct flashctx *flash); int write_jedec(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); @@ -111,7 +111,7 @@ int block_erase_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len); int block_erase_chip_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len); int write_m29f400bt(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); -void protect_m29f400bt(chipaddr bios); +void protect_m29f400bt(struct flashctx *flash, chipaddr bios); /* pm49fl00x.c */ int unlock_49fl00x(struct flashctx *flash); Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/dediprog.c Sun Dec 18 16:01:24 2011 (r1474) @@ -317,8 +317,11 @@ return ret; } -static int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int dediprog_spi_send_command(struct flashctx *flash, + unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int ret; Modified: trunk/drkaiser.c ============================================================================== --- trunk/drkaiser.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/drkaiser.c Sun Dec 18 16:01:24 2011 (r1474) @@ -39,6 +39,10 @@ static uint8_t *drkaiser_bar; +static void drkaiser_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t drkaiser_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_drkaiser = { .chip_readb = drkaiser_chip_readb, .chip_readw = fallback_chip_readw, @@ -84,12 +88,14 @@ return 0; } -void drkaiser_chip_writeb(uint8_t val, chipaddr addr) +static void drkaiser_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { pci_mmio_writeb(val, drkaiser_bar + (addr & DRKAISER_MEMMAP_MASK)); } -uint8_t drkaiser_chip_readb(const chipaddr addr) +static uint8_t drkaiser_chip_readb(const struct flashctx *flash, + const chipaddr addr) { return pci_mmio_readb(drkaiser_bar + (addr & DRKAISER_MEMMAP_MASK)); } Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/dummyflasher.c Sun Dec 18 16:01:24 2011 (r1474) @@ -60,10 +60,28 @@ static unsigned int spi_write_256_chunksize = 256; -static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int dummy_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static int dummy_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +static void dummy_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static void dummy_chip_writew(const struct flashctx *flash, uint16_t val, + chipaddr addr); +static void dummy_chip_writel(const struct flashctx *flash, uint32_t val, + chipaddr addr); +static void dummy_chip_writen(const struct flashctx *flash, uint8_t *buf, + chipaddr addr, size_t len); +static uint8_t dummy_chip_readb(const struct flashctx *flash, + const chipaddr addr); +static uint16_t dummy_chip_readw(const struct flashctx *flash, + const chipaddr addr); +static uint32_t dummy_chip_readl(const struct flashctx *flash, + const chipaddr addr); +static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, + const chipaddr addr, size_t len); static const struct spi_programmer spi_programmer_dummyflasher = { .type = SPI_CONTROLLER_DUMMY, @@ -263,22 +281,26 @@ __func__, (unsigned long)len, virt_addr); } -void dummy_chip_writeb(uint8_t val, chipaddr addr) +static void dummy_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { msg_pspew("%s: addr=0x%lx, val=0x%02x\n", __func__, addr, val); } -void dummy_chip_writew(uint16_t val, chipaddr addr) +static void dummy_chip_writew(const struct flashctx *flash, uint16_t val, + chipaddr addr) { msg_pspew("%s: addr=0x%lx, val=0x%04x\n", __func__, addr, val); } -void dummy_chip_writel(uint32_t val, chipaddr addr) +static void dummy_chip_writel(const struct flashctx *flash, uint32_t val, + chipaddr addr) { msg_pspew("%s: addr=0x%lx, val=0x%08x\n", __func__, addr, val); } -void dummy_chip_writen(uint8_t *buf, chipaddr addr, size_t len) +static void dummy_chip_writen(const struct flashctx *flash, uint8_t *buf, + chipaddr addr, size_t len) { size_t i; msg_pspew("%s: addr=0x%lx, len=0x%08lx, writing data (hex):", @@ -290,25 +312,29 @@ } } -uint8_t dummy_chip_readb(const chipaddr addr) +static uint8_t dummy_chip_readb(const struct flashctx *flash, + const chipaddr addr) { msg_pspew("%s: addr=0x%lx, returning 0xff\n", __func__, addr); return 0xff; } -uint16_t dummy_chip_readw(const chipaddr addr) +static uint16_t dummy_chip_readw(const struct flashctx *flash, + const chipaddr addr) { msg_pspew("%s: addr=0x%lx, returning 0xffff\n", __func__, addr); return 0xffff; } -uint32_t dummy_chip_readl(const chipaddr addr) +static uint32_t dummy_chip_readl(const struct flashctx *flash, + const chipaddr addr) { msg_pspew("%s: addr=0x%lx, returning 0xffffffff\n", __func__, addr); return 0xffffffff; } -void dummy_chip_readn(uint8_t *buf, const chipaddr addr, size_t len) +static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, + const chipaddr addr, size_t len) { msg_pspew("%s: addr=0x%lx, len=0x%lx, returning array of 0xff\n", __func__, addr, (unsigned long)len); @@ -317,8 +343,10 @@ } #if EMULATE_SPI_CHIP -static int emulate_spi_chip_response(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int emulate_spi_chip_response(unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { unsigned int offs; static int unsigned aai_offs; @@ -513,8 +541,10 @@ } #endif -static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int dummy_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int i; Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/flash.h Sun Dec 18 16:01:24 2011 (r1474) @@ -44,14 +44,6 @@ void *programmer_map_flash_region(const char *descr, unsigned long phys_addr, size_t len); void programmer_unmap_flash_region(void *virt_addr, size_t len); -void chip_writeb(uint8_t val, chipaddr addr); -void chip_writew(uint16_t val, chipaddr addr); -void chip_writel(uint32_t val, chipaddr addr); -void chip_writen(uint8_t *buf, chipaddr addr, size_t len); -uint8_t chip_readb(const chipaddr addr); -uint16_t chip_readw(const chipaddr addr); -uint32_t chip_readl(const chipaddr addr); -void chip_readn(uint8_t *buf, const chipaddr addr, size_t len); void programmer_delay(int usecs); #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) @@ -212,6 +204,15 @@ extern const struct flashchip flashchips[]; +void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); +void chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr); +void chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr); +void chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len); +uint8_t chip_readb(const struct flashctx *flash, const chipaddr addr); +uint16_t chip_readw(const struct flashctx *flash, const chipaddr addr); +uint32_t chip_readl(const struct flashctx *flash, const chipaddr addr); +void chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); + /* print.c */ char *flashbuses_to_text(enum chipbustype bustype); void print_supported(void); @@ -292,9 +293,8 @@ const unsigned char *writearr; unsigned char *readarr; }; -int spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int spi_send_multicommand(struct spi_command *cmds); -uint32_t spi_get_valid_read_addr(void); +int spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); +int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds); +uint32_t spi_get_valid_read_addr(struct flashctx *flash); #endif /* !__FLASH_H__ */ Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/flashrom.c Sun Dec 18 16:01:24 2011 (r1474) @@ -359,44 +359,46 @@ programmer_table[programmer].unmap_flash_region(virt_addr, len); } -void chip_writeb(uint8_t val, chipaddr addr) +void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { - par_programmer->chip_writeb(val, addr); + par_programmer->chip_writeb(flash, val, addr); } -void chip_writew(uint16_t val, chipaddr addr) +void chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr) { - par_programmer->chip_writew(val, addr); + par_programmer->chip_writew(flash, val, addr); } -void chip_writel(uint32_t val, chipaddr addr) +void chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr) { - par_programmer->chip_writel(val, addr); + par_programmer->chip_writel(flash, val, addr); } -void chip_writen(uint8_t *buf, chipaddr addr, size_t len) +void chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, + size_t len) { - par_programmer->chip_writen(buf, addr, len); + par_programmer->chip_writen(flash, buf, addr, len); } -uint8_t chip_readb(const chipaddr addr) +uint8_t chip_readb(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readb(addr); + return par_programmer->chip_readb(flash, addr); } -uint16_t chip_readw(const chipaddr addr) +uint16_t chip_readw(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readw(addr); + return par_programmer->chip_readw(flash, addr); } -uint32_t chip_readl(const chipaddr addr) +uint32_t chip_readl(const struct flashctx *flash, const chipaddr addr) { - return par_programmer->chip_readl(addr); + return par_programmer->chip_readl(flash, addr); } -void chip_readn(uint8_t *buf, chipaddr addr, size_t len) +void chip_readn(const struct flashctx *flash, uint8_t *buf, chipaddr addr, + size_t len) { - par_programmer->chip_readn(buf, addr, len); + par_programmer->chip_readn(flash, buf, addr, len); } void programmer_delay(int usecs) @@ -412,9 +414,10 @@ flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); } -int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len) +int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, + int unsigned len) { - chip_readn(buf, flash->virtual_memory + start, len); + chip_readn(flash, buf, flash->virtual_memory + start, len); return 0; } @@ -535,7 +538,8 @@ } /* start is an offset to the base address of the flash chip */ -int check_erased_range(struct flashctx *flash, unsigned int start, unsigned int len) +int check_erased_range(struct flashctx *flash, unsigned int start, + unsigned int len) { int ret; uint8_t *cmpbuf = malloc(len); @@ -558,8 +562,8 @@ * @message string to print in the "FAILED" message * @return 0 for success, -1 for failure */ -int verify_range(struct flashctx *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, - const char *message) +int verify_range(struct flashctx *flash, uint8_t *cmpbuf, unsigned int start, + unsigned int len, const char *message) { unsigned int i; uint8_t *readbuf = malloc(len); @@ -1537,7 +1541,8 @@ /* Check that virtual_memory in struct flashctx is placed directly * after the members copied from struct flashchip. */ - if (sizeof(struct flashchip) != offsetof(struct flashctx, virtual_memory)) { + if (sizeof(struct flashchip) != + offsetof(struct flashctx, virtual_memory)) { msg_gerr("struct flashctx broken!\n"); ret = 1; } @@ -1618,7 +1623,8 @@ /* FIXME: This function signature needs to be improved once doit() has a better * function signature. */ -int chip_safety_check(struct flashctx *flash, int force, int read_it, int write_it, int erase_it, int verify_it) +int chip_safety_check(struct flashctx *flash, int force, int read_it, + int write_it, int erase_it, int verify_it) { if (!programmer_may_write && (write_it || erase_it)) { msg_perr("Write/erase is not working yet on your programmer in " @@ -1679,7 +1685,8 @@ * but right now it allows us to split off the CLI code. * Besides that, the function itself is a textbook example of abysmal code flow. */ -int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it) +int doit(struct flashctx *flash, int force, const char *filename, int read_it, + int write_it, int erase_it, int verify_it) { uint8_t *oldcontents; uint8_t *newcontents; Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/ft2232_spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -144,8 +144,10 @@ return 0; } -static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int ft2232_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static const struct spi_programmer spi_programmer_ft2232 = { .type = SPI_CONTROLLER_FT2232, @@ -342,8 +344,10 @@ } /* Returns 0 upon success, a negative number upon errors. */ -static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int ft2232_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { struct ftdi_context *ftdic = &ftdic_context; static unsigned char *buf = NULL; Modified: trunk/gfxnvidia.c ============================================================================== --- trunk/gfxnvidia.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/gfxnvidia.c Sun Dec 18 16:01:24 2011 (r1474) @@ -61,6 +61,10 @@ {}, }; +static void gfxnvidia_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t gfxnvidia_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_gfxnvidia = { .chip_readb = gfxnvidia_chip_readb, .chip_readw = fallback_chip_readw, @@ -112,12 +116,14 @@ return 0; } -void gfxnvidia_chip_writeb(uint8_t val, chipaddr addr) +static void gfxnvidia_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { pci_mmio_writeb(val, nvidia_bar + (addr & GFXNVIDIA_MEMMAP_MASK)); } -uint8_t gfxnvidia_chip_readb(const chipaddr addr) +static uint8_t gfxnvidia_chip_readb(const struct flashctx *flash, + const chipaddr addr) { return pci_mmio_readb(nvidia_bar + (addr & GFXNVIDIA_MEMMAP_MASK)); } Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/ichspi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -228,7 +228,7 @@ static int find_preop(OPCODES *op, uint8_t preop); static int generate_opcodes(OPCODES * op); static int program_opcodes(OPCODES *op, int enable_undo); -static int run_opcode(OPCODE op, uint32_t offset, +static int run_opcode(const struct flashctx *flash, OPCODE op, uint32_t offset, uint8_t datalength, uint8_t * data); /* for pairing opcodes with their required preop */ @@ -638,7 +638,7 @@ * Note that using len > spi_programmer->max_data_read will return garbage or * may even crash. */ - static void ich_read_data(uint8_t *data, int len, int reg0_off) +static void ich_read_data(uint8_t *data, int len, int reg0_off) { int i; uint32_t temp32 = 0; @@ -956,7 +956,7 @@ return 0; } -static int run_opcode(OPCODE op, uint32_t offset, +static int run_opcode(const struct flashctx *flash, OPCODE op, uint32_t offset, uint8_t datalength, uint8_t * data) { /* max_data_read == max_data_write for all Intel/VIA SPI masters */ @@ -983,8 +983,10 @@ } } -static int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int ich_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int result; int opcode_index = -1; @@ -1076,7 +1078,7 @@ count = readcnt; } - result = run_opcode(*opcode, addr, count, data); + result = run_opcode(flash, *opcode, addr, count, data); if (result) { msg_pdbg("Running OPCODE 0x%02x failed ", opcode->opcode); if ((opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) || @@ -1175,7 +1177,7 @@ return 0; } -int ich_hwseq_probe(struct flashctx *flash) +static int ich_hwseq_probe(struct flashctx *flash) { uint32_t total_size, boundary; uint32_t erase_size_low, size_low, erase_size_high, size_high; @@ -1228,9 +1230,8 @@ return 1; } -int ich_hwseq_block_erase(struct flashctx *flash, - unsigned int addr, - unsigned int len) +static int ich_hwseq_block_erase(struct flashctx *flash, unsigned int addr, + unsigned int len) { uint32_t erase_block; uint16_t hsfc; @@ -1278,8 +1279,8 @@ return 0; } -int ich_hwseq_read(struct flashctx *flash, uint8_t *buf, unsigned int addr, - unsigned int len) +static int ich_hwseq_read(struct flashctx *flash, uint8_t *buf, + unsigned int addr, unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; @@ -1316,8 +1317,8 @@ return 0; } -int ich_hwseq_write(struct flashctx *flash, uint8_t *buf, unsigned int addr, - unsigned int len) +static int ich_hwseq_write(struct flashctx *flash, uint8_t *buf, + unsigned int addr, unsigned int len) { uint16_t hsfc; uint16_t timeout = 100 * 60; @@ -1355,7 +1356,8 @@ return 0; } -static int ich_spi_send_multicommand(struct spi_command *cmds) +static int ich_spi_send_multicommand(struct flashctx *flash, + struct spi_command *cmds) { int ret = 0; int i; @@ -1405,7 +1407,7 @@ * preoppos matched, this is a normal opcode. */ } - ret = ich_spi_send_command(cmds->writecnt, cmds->readcnt, + ret = ich_spi_send_command(flash, cmds->writecnt, cmds->readcnt, cmds->writearr, cmds->readarr); /* Reset the type of all opcodes to non-atomic. */ for (i = 0; i < 8; i++) Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/internal.c Sun Dec 18 16:01:24 2011 (r1474) @@ -127,6 +127,20 @@ int is_laptop = 0; int laptop_ok = 0; +static void internal_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static void internal_chip_writew(const struct flashctx *flash, uint16_t val, + chipaddr addr); +static void internal_chip_writel(const struct flashctx *flash, uint32_t val, + chipaddr addr); +static uint8_t internal_chip_readb(const struct flashctx *flash, + const chipaddr addr); +static uint16_t internal_chip_readw(const struct flashctx *flash, + const chipaddr addr); +static uint32_t internal_chip_readl(const struct flashctx *flash, + const chipaddr addr); +static void internal_chip_readn(const struct flashctx *flash, uint8_t *buf, + const chipaddr addr, size_t len); static const struct par_programmer par_programmer_internal = { .chip_readb = internal_chip_readb, .chip_readw = internal_chip_readw, @@ -324,37 +338,44 @@ } #endif -void internal_chip_writeb(uint8_t val, chipaddr addr) +static void internal_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { mmio_writeb(val, (void *) addr); } -void internal_chip_writew(uint16_t val, chipaddr addr) +static void internal_chip_writew(const struct flashctx *flash, uint16_t val, + chipaddr addr) { mmio_writew(val, (void *) addr); } -void internal_chip_writel(uint32_t val, chipaddr addr) +static void internal_chip_writel(const struct flashctx *flash, uint32_t val, + chipaddr addr) { mmio_writel(val, (void *) addr); } -uint8_t internal_chip_readb(const chipaddr addr) +static uint8_t internal_chip_readb(const struct flashctx *flash, + const chipaddr addr) { return mmio_readb((void *) addr); } -uint16_t internal_chip_readw(const chipaddr addr) +static uint16_t internal_chip_readw(const struct flashctx *flash, + const chipaddr addr) { return mmio_readw((void *) addr); } -uint32_t internal_chip_readl(const chipaddr addr) +static uint32_t internal_chip_readl(const struct flashctx *flash, + const chipaddr addr) { return mmio_readl((void *) addr); } -void internal_chip_readn(uint8_t *buf, const chipaddr addr, size_t len) +static void internal_chip_readn(const struct flashctx *flash, uint8_t *buf, + const chipaddr addr, size_t len) { memcpy(buf, (void *)addr, len); return; Modified: trunk/it85spi.c ============================================================================== --- trunk/it85spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/it85spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -270,8 +270,10 @@ return 0; } -static int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int it85xx_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static const struct spi_programmer spi_programmer_it85xx = { .type = SPI_CONTROLLER_IT85XX, @@ -320,8 +322,10 @@ * 3. read date from LPC/FWH address 0xffff_fdxxh (drive CE# low and get * data from MISO) */ -static int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int it85xx_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int i; Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/it87spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -103,8 +103,10 @@ return; } -static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); +static int it8716f_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); static int it8716f_spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static int it8716f_spi_chip_write_256(struct flashctx *flash, uint8_t *buf, @@ -247,8 +249,10 @@ * commands with the address in inverse wire order. That's why the register * ordering in case 4 and 5 may seem strange. */ -static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int it8716f_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { uint8_t busy, writeenc; int i; @@ -319,19 +323,19 @@ int result; chipaddr bios = flash->virtual_memory; - result = spi_write_enable(); + result = spi_write_enable(flash); if (result) return result; /* FIXME: The command below seems to be redundant or wrong. */ OUTB(0x06, it8716f_flashport + 1); OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); for (i = 0; i < flash->page_size; i++) - chip_writeb(buf[i], bios + start + i); + chip_writeb(flash, buf[i], bios + start + i); OUTB(0, it8716f_flashport); /* Wait until the Write-In-Progress bit is cleared. * This usually takes 1-10 ms, so wait in 1 ms steps. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(1000); return 0; } Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/jedec.c Sun Dec 18 16:01:24 2011 (r1474) @@ -37,17 +37,18 @@ return (val ^ (val >> 1)) & 0x1; } -static void toggle_ready_jedec_common(chipaddr dst, int delay) +static void toggle_ready_jedec_common(const struct flashctx *flash, + chipaddr dst, int delay) { unsigned int i = 0; uint8_t tmp1, tmp2; - tmp1 = chip_readb(dst) & 0x40; + tmp1 = chip_readb(flash, dst) & 0x40; while (i++ < 0xFFFFFFF) { if (delay) programmer_delay(delay); - tmp2 = chip_readb(dst) & 0x40; + tmp2 = chip_readb(flash, dst) & 0x40; if (tmp1 == tmp2) { break; } @@ -57,9 +58,9 @@ msg_cdbg("%s: excessive loops, i=0x%x\n", __func__, i); } -void toggle_ready_jedec(chipaddr dst) +void toggle_ready_jedec(const struct flashctx *flash, chipaddr dst) { - toggle_ready_jedec_common(dst, 0); + toggle_ready_jedec_common(flash, dst, 0); } /* Some chips require a minimum delay between toggle bit reads. @@ -69,12 +70,13 @@ * Given that erase is slow on all chips, it is recommended to use * toggle_ready_jedec_slow in erase functions. */ -static void toggle_ready_jedec_slow(chipaddr dst) +static void toggle_ready_jedec_slow(const struct flashctx *flash, chipaddr dst) { - toggle_ready_jedec_common(dst, 8 * 1000); + toggle_ready_jedec_common(flash, dst, 8 * 1000); } -void data_polling_jedec(chipaddr dst, uint8_t data) +void data_polling_jedec(const struct flashctx *flash, chipaddr dst, + uint8_t data) { unsigned int i = 0; uint8_t tmp; @@ -82,7 +84,7 @@ data &= 0x80; while (i++ < 0xFFFFFFF) { - tmp = chip_readb(dst) & 0x80; + tmp = chip_readb(flash, dst) & 0x80; if (tmp == data) { break; } @@ -110,12 +112,13 @@ } } -static void start_program_jedec_common(struct flashctx *flash, unsigned int mask) +static void start_program_jedec_common(struct flashctx *flash, + unsigned int mask) { chipaddr bios = flash->virtual_memory; - chip_writeb(0xAA, bios + (0x5555 & mask)); - chip_writeb(0x55, bios + (0x2AAA & mask)); - chip_writeb(0xA0, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0xA0, bios + (0x5555 & mask)); } static int probe_jedec_common(struct flashctx *flash, unsigned int mask) @@ -150,57 +153,57 @@ /* Reset chip to a clean slate */ if ((flash->feature_bits & FEATURE_RESET_MASK) == FEATURE_LONG_RESET) { - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); if (probe_timing_exit) programmer_delay(10); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); if (probe_timing_exit) programmer_delay(10); } - chip_writeb(0xF0, bios + (0x5555 & mask)); + chip_writeb(flash, 0xF0, bios + (0x5555 & mask)); if (probe_timing_exit) programmer_delay(probe_timing_exit); /* Issue JEDEC Product ID Entry command */ - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); if (probe_timing_enter) programmer_delay(10); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); if (probe_timing_enter) programmer_delay(10); - chip_writeb(0x90, bios + (0x5555 & mask)); + chip_writeb(flash, 0x90, bios + (0x5555 & mask)); if (probe_timing_enter) programmer_delay(probe_timing_enter); /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); + id1 = chip_readb(flash, bios); + id2 = chip_readb(flash, bios + 0x01); largeid1 = id1; largeid2 = id2; /* Check if it is a continuation ID, this should be a while loop. */ if (id1 == 0x7F) { largeid1 <<= 8; - id1 = chip_readb(bios + 0x100); + id1 = chip_readb(flash, bios + 0x100); largeid1 |= id1; } if (id2 == 0x7F) { largeid2 <<= 8; - id2 = chip_readb(bios + 0x101); + id2 = chip_readb(flash, bios + 0x101); largeid2 |= id2; } /* Issue JEDEC Product ID Exit command */ if ((flash->feature_bits & FEATURE_RESET_MASK) == FEATURE_LONG_RESET) { - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); if (probe_timing_exit) programmer_delay(10); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); if (probe_timing_exit) programmer_delay(10); } - chip_writeb(0xF0, bios + (0x5555 & mask)); + chip_writeb(flash, 0xF0, bios + (0x5555 & mask)); if (probe_timing_exit) programmer_delay(probe_timing_exit); @@ -209,17 +212,17 @@ msg_cdbg(", id1 parity violation"); /* Read the product ID location again. We should now see normal flash contents. */ - flashcontent1 = chip_readb(bios); - flashcontent2 = chip_readb(bios + 0x01); + flashcontent1 = chip_readb(flash, bios); + flashcontent2 = chip_readb(flash, bios + 0x01); /* Check if it is a continuation ID, this should be a while loop. */ if (flashcontent1 == 0x7F) { flashcontent1 <<= 8; - flashcontent1 |= chip_readb(bios + 0x100); + flashcontent1 |= chip_readb(flash, bios + 0x100); } if (flashcontent2 == 0x7F) { flashcontent2 <<= 8; - flashcontent2 |= chip_readb(bios + 0x101); + flashcontent2 |= chip_readb(flash, bios + 0x101); } if (largeid1 == flashcontent1) @@ -238,7 +241,7 @@ } static int erase_sector_jedec_common(struct flashctx *flash, unsigned int page, - unsigned int pagesize, unsigned int mask) + unsigned int pagesize, unsigned int mask) { chipaddr bios = flash->virtual_memory; int delay_us = 0; @@ -246,29 +249,29 @@ delay_us = 10; /* Issue the Sector Erase command */ - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x80, bios + (0x5555 & mask)); + chip_writeb(flash, 0x80, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x30, bios + page); + chip_writeb(flash, 0x30, bios + page); programmer_delay(delay_us); /* wait for Toggle bit ready */ - toggle_ready_jedec_slow(bios); + toggle_ready_jedec_slow(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } static int erase_block_jedec_common(struct flashctx *flash, unsigned int block, - unsigned int blocksize, unsigned int mask) + unsigned int blocksize, unsigned int mask) { chipaddr bios = flash->virtual_memory; int delay_us = 0; @@ -276,22 +279,22 @@ delay_us = 10; /* Issue the Sector Erase command */ - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x80, bios + (0x5555 & mask)); + chip_writeb(flash, 0x80, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x50, bios + block); + chip_writeb(flash, 0x50, bios + block); programmer_delay(delay_us); /* wait for Toggle bit ready */ - toggle_ready_jedec_slow(bios); + toggle_ready_jedec_slow(flash, bios); /* FIXME: Check the status register for errors. */ return 0; @@ -305,28 +308,28 @@ delay_us = 10; /* Issue the JEDEC Chip Erase command */ - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x80, bios + (0x5555 & mask)); + chip_writeb(flash, 0x80, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0xAA, bios + (0x5555 & mask)); + chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); programmer_delay(delay_us); - chip_writeb(0x55, bios + (0x2AAA & mask)); + chip_writeb(flash, 0x55, bios + (0x2AAA & mask)); programmer_delay(delay_us); - chip_writeb(0x10, bios + (0x5555 & mask)); + chip_writeb(flash, 0x10, bios + (0x5555 & mask)); programmer_delay(delay_us); - toggle_ready_jedec_slow(bios); + toggle_ready_jedec_slow(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } static int write_byte_program_jedec_common(struct flashctx *flash, uint8_t *src, - chipaddr dst, unsigned int mask) + chipaddr dst, unsigned int mask) { int tried = 0, failed = 0; chipaddr bios = flash->virtual_memory; @@ -341,10 +344,10 @@ start_program_jedec_common(flash, mask); /* transfer data from source to destination */ - chip_writeb(*src, dst); - toggle_ready_jedec(bios); + chip_writeb(flash, *src, dst); + toggle_ready_jedec(flash, bios); - if (chip_readb(dst) != *src && tried++ < MAX_REFLASH_TRIES) { + if (chip_readb(flash, dst) != *src && tried++ < MAX_REFLASH_TRIES) { goto retry; } @@ -355,7 +358,8 @@ } /* chunksize is 1 */ -int write_jedec_1(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_jedec_1(struct flashctx *flash, uint8_t *src, unsigned int start, + unsigned int len) { int i, failed = 0; chipaddr dst = flash->virtual_memory + start; @@ -376,7 +380,8 @@ return failed; } -int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int page_size) +int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, + unsigned int start, unsigned int page_size) { int i, tried = 0, failed; uint8_t *s = src; @@ -395,12 +400,12 @@ for (i = 0; i < page_size; i++) { /* If the data is 0xFF, don't program it */ if (*src != 0xFF) - chip_writeb(*src, dst); + chip_writeb(flash, *src, dst); dst++; src++; } - toggle_ready_jedec(dst - 1); + toggle_ready_jedec(flash, dst - 1); dst = d; src = s; @@ -424,7 +429,8 @@ * This function is a slightly modified copy of spi_write_chunked. * Each page is written separately in chunks with a maximum size of chunksize. */ -int write_jedec(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len) +int write_jedec(struct flashctx *flash, uint8_t *buf, unsigned int start, + int unsigned len) { unsigned int i, starthere, lenhere; /* FIXME: page_size is the wrong variable. We need max_writechunk_size @@ -480,7 +486,8 @@ return probe_jedec_common(flash, mask); } -int erase_sector_jedec(struct flashctx *flash, unsigned int page, unsigned int size) +int erase_sector_jedec(struct flashctx *flash, unsigned int page, + unsigned int size) { unsigned int mask; @@ -488,7 +495,8 @@ return erase_sector_jedec_common(flash, page, size, mask); } -int erase_block_jedec(struct flashctx *flash, unsigned int page, unsigned int size) +int erase_block_jedec(struct flashctx *flash, unsigned int page, + unsigned int size) { unsigned int mask; Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/linux_spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -34,8 +34,10 @@ static int fd = -1; static int linux_spi_shutdown(void *data); -static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *txbuf, unsigned char *rxbuf); +static int linux_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf); static int linux_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static int linux_spi_write_256(struct flashctx *flash, uint8_t *buf, @@ -107,8 +109,10 @@ return 0; } -static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *txbuf, unsigned char *rxbuf) +static int linux_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *txbuf, + unsigned char *rxbuf) { struct spi_ioc_transfer msg[2] = { { @@ -134,11 +138,13 @@ static int linux_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - return spi_read_chunked(flash, buf, start, len, (unsigned)getpagesize()); + return spi_read_chunked(flash, buf, start, len, + (unsigned int)getpagesize()); } static int linux_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - return spi_write_chunked(flash, buf, start, len, ((unsigned)getpagesize()) - 4); + return spi_write_chunked(flash, buf, start, len, + ((unsigned int)getpagesize()) - 4); } Modified: trunk/m29f400bt.c ============================================================================== --- trunk/m29f400bt.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/m29f400bt.c Sun Dec 18 16:01:24 2011 (r1474) @@ -28,24 +28,25 @@ functions. */ /* chunksize is 1 */ -int write_m29f400bt(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_m29f400bt(struct flashctx *flash, uint8_t *src, unsigned int start, + unsigned int len) { int i; chipaddr bios = flash->virtual_memory; chipaddr dst = flash->virtual_memory + start; for (i = 0; i < len; i++) { - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0xA0, bios + 0xAAA); + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0xA0, bios + 0xAAA); /* transfer data from source to destination */ - chip_writeb(*src, dst); - toggle_ready_jedec(dst); + chip_writeb(flash, *src, dst); + toggle_ready_jedec(flash, dst); #if 0 /* We only want to print something in the error case. */ msg_cerr("Value in the flash at address 0x%lx = %#x, want %#x\n", - (dst - bios), chip_readb(dst), *src); + (dst - bios), chip_readb(flash, dst), *src); #endif dst++; src++; @@ -60,21 +61,21 @@ chipaddr bios = flash->virtual_memory; uint8_t id1, id2; - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0x90, bios + 0xAAA); + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0x90, bios + 0xAAA); programmer_delay(10); - id1 = chip_readb(bios); + id1 = chip_readb(flash, bios); /* The data sheet says id2 is at (bios + 0x01) and id2 listed in * flash.h does not match. It should be possible to use JEDEC probe. */ - id2 = chip_readb(bios + 0x02); + id2 = chip_readb(flash, bios + 0x02); - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0xF0, bios + 0xAAA); + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0xF0, bios + 0xAAA); programmer_delay(10); @@ -90,42 +91,44 @@ { chipaddr bios = flash->virtual_memory; - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0x80, bios + 0xAAA); - - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0x10, bios + 0xAAA); + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0x80, bios + 0xAAA); + + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0x10, bios + 0xAAA); programmer_delay(10); - toggle_ready_jedec(bios); + toggle_ready_jedec(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } -int block_erase_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len) +int block_erase_m29f400bt(struct flashctx *flash, unsigned int start, + unsigned int len) { chipaddr bios = flash->virtual_memory; chipaddr dst = bios + start; - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0x80, bios + 0xAAA); - - chip_writeb(0xAA, bios + 0xAAA); - chip_writeb(0x55, bios + 0x555); - chip_writeb(0x30, dst); + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0x80, bios + 0xAAA); + + chip_writeb(flash, 0xAA, bios + 0xAAA); + chip_writeb(flash, 0x55, bios + 0x555); + chip_writeb(flash, 0x30, dst); programmer_delay(10); - toggle_ready_jedec(bios); + toggle_ready_jedec(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } -int block_erase_chip_m29f400bt(struct flashctx *flash, unsigned int address, unsigned int blocklen) +int block_erase_chip_m29f400bt(struct flashctx *flash, unsigned int address, + unsigned int blocklen) { if ((address != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", Modified: trunk/nic3com.c ============================================================================== --- trunk/nic3com.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/nic3com.c Sun Dec 18 16:01:24 2011 (r1474) @@ -55,6 +55,10 @@ {}, }; +static void nic3com_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t nic3com_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_nic3com = { .chip_readb = nic3com_chip_readb, .chip_readw = fallback_chip_readw, @@ -116,13 +120,15 @@ return 0; } -void nic3com_chip_writeb(uint8_t val, chipaddr addr) +static void nic3com_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); OUTB(val, io_base_addr + BIOS_ROM_DATA); } -uint8_t nic3com_chip_readb(const chipaddr addr) +static uint8_t nic3com_chip_readb(const struct flashctx *flash, + const chipaddr addr) { OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); return INB(io_base_addr + BIOS_ROM_DATA); Modified: trunk/nicintel.c ============================================================================== --- trunk/nicintel.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/nicintel.c Sun Dec 18 16:01:24 2011 (r1474) @@ -43,6 +43,10 @@ #define CSR_FCR 0x0c +static void nicintel_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t nicintel_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_nicintel = { .chip_readb = nicintel_chip_readb, .chip_readw = fallback_chip_readw, @@ -117,12 +121,14 @@ return 1; } -void nicintel_chip_writeb(uint8_t val, chipaddr addr) +static void nicintel_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { pci_mmio_writeb(val, nicintel_bar + (addr & NICINTEL_MEMMAP_MASK)); } -uint8_t nicintel_chip_readb(const chipaddr addr) +static uint8_t nicintel_chip_readb(const struct flashctx *flash, + const chipaddr addr) { return pci_mmio_readb(nicintel_bar + (addr & NICINTEL_MEMMAP_MASK)); } Modified: trunk/nicnatsemi.c ============================================================================== --- trunk/nicnatsemi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/nicnatsemi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -35,6 +35,10 @@ {}, }; +static void nicnatsemi_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t nicnatsemi_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_nicnatsemi = { .chip_readb = nicnatsemi_chip_readb, .chip_readw = fallback_chip_readw, @@ -74,7 +78,8 @@ return 0; } -void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr) +static void nicnatsemi_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { OUTL((uint32_t)addr & 0x0001FFFF, io_base_addr + BOOT_ROM_ADDR); /* @@ -88,7 +93,8 @@ OUTB(val, io_base_addr + BOOT_ROM_DATA); } -uint8_t nicnatsemi_chip_readb(const chipaddr addr) +static uint8_t nicnatsemi_chip_readb(const struct flashctx *flash, + const chipaddr addr) { OUTL(((uint32_t)addr & 0x0001FFFF), io_base_addr + BOOT_ROM_ADDR); /* Modified: trunk/nicrealtek.c ============================================================================== --- trunk/nicrealtek.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/nicrealtek.c Sun Dec 18 16:01:24 2011 (r1474) @@ -36,6 +36,10 @@ {}, }; +static void nicrealtek_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t nicrealtek_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_nicrealtek = { .chip_readb = nicrealtek_chip_readb, .chip_readw = fallback_chip_readw, @@ -69,7 +73,8 @@ return 0; } -void nicrealtek_chip_writeb(uint8_t val, chipaddr addr) +static void nicrealtek_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { /* Output addr and data, set WE to 0, set OE to 1, set CS to 0, * enable software access. @@ -83,7 +88,8 @@ io_base_addr + BIOS_ROM_ADDR); } -uint8_t nicrealtek_chip_readb(const chipaddr addr) +static uint8_t nicrealtek_chip_readb(const struct flashctx *flash, + const chipaddr addr) { uint8_t val; Modified: trunk/pm49fl00x.c ============================================================================== --- trunk/pm49fl00x.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/pm49fl00x.c Sun Dec 18 16:01:24 2011 (r1474) @@ -22,28 +22,32 @@ #include "flash.h" -static void write_lockbits_49fl00x(chipaddr bios, unsigned int size, - unsigned char bits, unsigned int block_size) +static void write_lockbits_49fl00x(const struct flashctx *flash, + unsigned int size, unsigned char bits, + unsigned int block_size) { unsigned int i, left = size; + chipaddr bios = flash->virtual_registers; for (i = 0; left >= block_size; i++, left -= block_size) { /* pm49fl002 */ if (block_size == 16384 && i % 2) continue; - chip_writeb(bits, bios + (i * block_size) + 2); + chip_writeb(flash, bits, bios + (i * block_size) + 2); } } int unlock_49fl00x(struct flashctx *flash) { - write_lockbits_49fl00x(flash->virtual_registers, flash->total_size * 1024, 0, flash->page_size); + write_lockbits_49fl00x(flash, flash->total_size * 1024, 0, + flash->page_size); return 0; } int lock_49fl00x(struct flashctx *flash) { - write_lockbits_49fl00x(flash->virtual_registers, flash->total_size * 1024, 1, flash->page_size); + write_lockbits_49fl00x(flash, flash->total_size * 1024, 1, + flash->page_size); return 0; } Modified: trunk/programmer.c ============================================================================== --- trunk/programmer.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/programmer.c Sun Dec 18 16:01:24 2011 (r1474) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009,2010 Carl-Daniel Hailfinger + * Copyright (C) 2009,2010,2011 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -53,61 +53,65 @@ } /* No-op chip_writeb() for drivers not supporting addr/data pair accesses */ -uint8_t noop_chip_readb(const chipaddr addr) +uint8_t noop_chip_readb(const struct flashctx *flash, const chipaddr addr) { return 0xff; } /* No-op chip_writeb() for drivers not supporting addr/data pair accesses */ -void noop_chip_writeb(uint8_t val, chipaddr addr) +void noop_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { } /* Little-endian fallback for drivers not supporting 16 bit accesses */ -void fallback_chip_writew(uint16_t val, chipaddr addr) +void fallback_chip_writew(const struct flashctx *flash, uint16_t val, + chipaddr addr) { - chip_writeb(val & 0xff, addr); - chip_writeb((val >> 8) & 0xff, addr + 1); + chip_writeb(flash, val & 0xff, addr); + chip_writeb(flash, (val >> 8) & 0xff, addr + 1); } /* Little-endian fallback for drivers not supporting 16 bit accesses */ -uint16_t fallback_chip_readw(const chipaddr addr) +uint16_t fallback_chip_readw(const struct flashctx *flash, const chipaddr addr) { uint16_t val; - val = chip_readb(addr); - val |= chip_readb(addr + 1) << 8; + val = chip_readb(flash, addr); + val |= chip_readb(flash, addr + 1) << 8; return val; } /* Little-endian fallback for drivers not supporting 32 bit accesses */ -void fallback_chip_writel(uint32_t val, chipaddr addr) +void fallback_chip_writel(const struct flashctx *flash, uint32_t val, + chipaddr addr) { - chip_writew(val & 0xffff, addr); - chip_writew((val >> 16) & 0xffff, addr + 2); + chip_writew(flash, val & 0xffff, addr); + chip_writew(flash, (val >> 16) & 0xffff, addr + 2); } /* Little-endian fallback for drivers not supporting 32 bit accesses */ -uint32_t fallback_chip_readl(const chipaddr addr) +uint32_t fallback_chip_readl(const struct flashctx *flash, const chipaddr addr) { uint32_t val; - val = chip_readw(addr); - val |= chip_readw(addr + 2) << 16; + val = chip_readw(flash, addr); + val |= chip_readw(flash, addr + 2) << 16; return val; } -void fallback_chip_writen(uint8_t *buf, chipaddr addr, size_t len) +void fallback_chip_writen(const struct flashctx *flash, uint8_t *buf, + chipaddr addr, size_t len) { size_t i; for (i = 0; i < len; i++) - chip_writeb(buf[i], addr + i); + chip_writeb(flash, buf[i], addr + i); return; } -void fallback_chip_readn(uint8_t *buf, chipaddr addr, size_t len) +void fallback_chip_readn(const struct flashctx *flash, uint8_t *buf, + chipaddr addr, size_t len) { size_t i; for (i = 0; i < len; i++) - buf[i] = chip_readb(addr + i); + buf[i] = chip_readb(flash, addr + i); return; } Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/programmer.h Sun Dec 18 16:01:24 2011 (r1474) @@ -93,8 +93,8 @@ int (*init) (void); - void * (*map_flash_region) (const char *descr, unsigned long phys_addr, - size_t len); + void *(*map_flash_region) (const char *descr, unsigned long phys_addr, + size_t len); void (*unmap_flash_region) (void *virt_addr, size_t len); void (*delay) (int usecs); @@ -300,13 +300,6 @@ int register_superio(struct superio s); extern enum chipbustype internal_buses_supported; int internal_init(void); -void internal_chip_writeb(uint8_t val, chipaddr addr); -void internal_chip_writew(uint16_t val, chipaddr addr); -void internal_chip_writel(uint32_t val, chipaddr addr); -uint8_t internal_chip_readb(const chipaddr addr); -uint16_t internal_chip_readw(const chipaddr addr); -uint32_t internal_chip_readl(const chipaddr addr); -void internal_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); #endif /* hwaccess.c */ @@ -341,91 +334,46 @@ void rmmio_valw(void *addr); void rmmio_vall(void *addr); -/* programmer.c */ -int noop_shutdown(void); -void *fallback_map(const char *descr, unsigned long phys_addr, size_t len); -void fallback_unmap(void *virt_addr, size_t len); -uint8_t noop_chip_readb(const chipaddr addr); -void noop_chip_writeb(uint8_t val, chipaddr addr); -void fallback_chip_writew(uint16_t val, chipaddr addr); -void fallback_chip_writel(uint32_t val, chipaddr addr); -void fallback_chip_writen(uint8_t *buf, chipaddr addr, size_t len); -uint16_t fallback_chip_readw(const chipaddr addr); -uint32_t fallback_chip_readl(const chipaddr addr); -void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); -struct par_programmer { - void (*chip_writeb) (uint8_t val, chipaddr addr); - void (*chip_writew) (uint16_t val, chipaddr addr); - void (*chip_writel) (uint32_t val, chipaddr addr); - void (*chip_writen) (uint8_t *buf, chipaddr addr, size_t len); - uint8_t (*chip_readb) (const chipaddr addr); - uint16_t (*chip_readw) (const chipaddr addr); - uint32_t (*chip_readl) (const chipaddr addr); - void (*chip_readn) (uint8_t *buf, const chipaddr addr, size_t len); -}; -extern const struct par_programmer *par_programmer; -void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); - /* dummyflasher.c */ #if CONFIG_DUMMY == 1 int dummy_init(void); void *dummy_map(const char *descr, unsigned long phys_addr, size_t len); void dummy_unmap(void *virt_addr, size_t len); -void dummy_chip_writeb(uint8_t val, chipaddr addr); -void dummy_chip_writew(uint16_t val, chipaddr addr); -void dummy_chip_writel(uint32_t val, chipaddr addr); -void dummy_chip_writen(uint8_t *buf, chipaddr addr, size_t len); -uint8_t dummy_chip_readb(const chipaddr addr); -uint16_t dummy_chip_readw(const chipaddr addr); -uint32_t dummy_chip_readl(const chipaddr addr); -void dummy_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); #endif /* nic3com.c */ #if CONFIG_NIC3COM == 1 int nic3com_init(void); -void nic3com_chip_writeb(uint8_t val, chipaddr addr); -uint8_t nic3com_chip_readb(const chipaddr addr); extern const struct pcidev_status nics_3com[]; #endif /* gfxnvidia.c */ #if CONFIG_GFXNVIDIA == 1 int gfxnvidia_init(void); -void gfxnvidia_chip_writeb(uint8_t val, chipaddr addr); -uint8_t gfxnvidia_chip_readb(const chipaddr addr); extern const struct pcidev_status gfx_nvidia[]; #endif /* drkaiser.c */ #if CONFIG_DRKAISER == 1 int drkaiser_init(void); -void drkaiser_chip_writeb(uint8_t val, chipaddr addr); -uint8_t drkaiser_chip_readb(const chipaddr addr); extern const struct pcidev_status drkaiser_pcidev[]; #endif /* nicrealtek.c */ #if CONFIG_NICREALTEK == 1 int nicrealtek_init(void); -void nicrealtek_chip_writeb(uint8_t val, chipaddr addr); -uint8_t nicrealtek_chip_readb(const chipaddr addr); extern const struct pcidev_status nics_realtek[]; #endif /* nicnatsemi.c */ #if CONFIG_NICNATSEMI == 1 int nicnatsemi_init(void); -void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr); -uint8_t nicnatsemi_chip_readb(const chipaddr addr); extern const struct pcidev_status nics_natsemi[]; #endif /* nicintel.c */ #if CONFIG_NICINTEL == 1 int nicintel_init(void); -void nicintel_chip_writeb(uint8_t val, chipaddr addr); -uint8_t nicintel_chip_readb(const chipaddr addr); extern const struct pcidev_status nics_intel[]; #endif @@ -444,24 +392,18 @@ /* satamv.c */ #if CONFIG_SATAMV == 1 int satamv_init(void); -void satamv_chip_writeb(uint8_t val, chipaddr addr); -uint8_t satamv_chip_readb(const chipaddr addr); extern const struct pcidev_status satas_mv[]; #endif /* satasii.c */ #if CONFIG_SATASII == 1 int satasii_init(void); -void satasii_chip_writeb(uint8_t val, chipaddr addr); -uint8_t satasii_chip_readb(const chipaddr addr); extern const struct pcidev_status satas_sii[]; #endif /* atahpt.c */ #if CONFIG_ATAHPT == 1 int atahpt_init(void); -void atahpt_chip_writeb(uint8_t val, chipaddr addr); -uint8_t atahpt_chip_readb(const chipaddr addr); extern const struct pcidev_status ata_hpt[]; #endif @@ -565,9 +507,9 @@ enum spi_controller type; unsigned int max_data_read; unsigned int max_data_write; - int (*command)(unsigned int writecnt, unsigned int readcnt, + int (*command)(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); - int (*multicommand)(struct spi_command *cmds); + int (*multicommand)(struct flashctx *flash, struct spi_command *cmds); /* Optimized functions for this programmer */ int (*read)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); @@ -575,9 +517,9 @@ }; extern const struct spi_programmer *spi_programmer; -int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, +int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -int default_spi_send_multicommand(struct spi_command *cmds); +int default_spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds); int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); void register_spi_programmer(const struct spi_programmer *programmer); @@ -632,12 +574,34 @@ extern const struct opaque_programmer *opaque_programmer; void register_opaque_programmer(const struct opaque_programmer *pgm); +/* programmer.c */ +int noop_shutdown(void); +void *fallback_map(const char *descr, unsigned long phys_addr, size_t len); +void fallback_unmap(void *virt_addr, size_t len); +uint8_t noop_chip_readb(const struct flashctx *flash, const chipaddr addr); +void noop_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); +void fallback_chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr); +void fallback_chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr); +void fallback_chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len); +uint16_t fallback_chip_readw(const struct flashctx *flash, const chipaddr addr); +uint32_t fallback_chip_readl(const struct flashctx *flash, const chipaddr addr); +void fallback_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); +struct par_programmer { + void (*chip_writeb) (const struct flashctx *flash, uint8_t val, chipaddr addr); + void (*chip_writew) (const struct flashctx *flash, uint16_t val, chipaddr addr); + void (*chip_writel) (const struct flashctx *flash, uint32_t val, chipaddr addr); + void (*chip_writen) (const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len); + uint8_t (*chip_readb) (const struct flashctx *flash, const chipaddr addr); + uint16_t (*chip_readw) (const struct flashctx *flash, const chipaddr addr); + uint32_t (*chip_readl) (const struct flashctx *flash, const chipaddr addr); + void (*chip_readn) (const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); +}; +extern const struct par_programmer *par_programmer; +void register_par_programmer(const struct par_programmer *pgm, const enum chipbustype buses); + /* serprog.c */ #if CONFIG_SERPROG == 1 int serprog_init(void); -void serprog_chip_writeb(uint8_t val, chipaddr addr); -uint8_t serprog_chip_readb(const chipaddr addr); -void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); void serprog_delay(int usecs); #endif Modified: trunk/satamv.c ============================================================================== --- trunk/satamv.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/satamv.c Sun Dec 18 16:01:24 2011 (r1474) @@ -41,6 +41,10 @@ #define PCI_BAR2_CONTROL 0x00c08 #define GPIO_PORT_CONTROL 0x104f0 +static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t satamv_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_satamv = { .chip_readb = satamv_chip_readb, .chip_readw = fallback_chip_readw, @@ -183,13 +187,15 @@ } /* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ -void satamv_chip_writeb(uint8_t val, chipaddr addr) +static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { satamv_indirect_chip_writeb(val, addr); } /* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ -uint8_t satamv_chip_readb(const chipaddr addr) +static uint8_t satamv_chip_readb(const struct flashctx *flash, + const chipaddr addr) { return satamv_indirect_chip_readb(addr); } Modified: trunk/satasii.c ============================================================================== --- trunk/satasii.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/satasii.c Sun Dec 18 16:01:24 2011 (r1474) @@ -42,6 +42,10 @@ {}, }; +static void satasii_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t satasii_chip_readb(const struct flashctx *flash, + const chipaddr addr); static const struct par_programmer par_programmer_satasii = { .chip_readb = satasii_chip_readb, .chip_readw = fallback_chip_readw, @@ -95,7 +99,8 @@ return 0; } -void satasii_chip_writeb(uint8_t val, chipaddr addr) +static void satasii_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { uint32_t ctrl_reg, data_reg; @@ -112,7 +117,8 @@ while (pci_mmio_readl(sii_bar) & (1 << 25)) ; } -uint8_t satasii_chip_readb(const chipaddr addr) +static uint8_t satasii_chip_readb(const struct flashctx *flash, + const chipaddr addr) { uint32_t ctrl_reg; Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/sb600spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -88,8 +88,10 @@ ; } -static int sb600_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int sb600_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int count; /* First byte is cmd which can not being sent through FIFO. */ Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/serprog.c Sun Dec 18 16:01:24 2011 (r1474) @@ -299,7 +299,8 @@ return 0; } -static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int serprog_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static int serprog_spi_read(struct flashctx *flash, uint8_t *buf, @@ -314,6 +315,12 @@ .write_256 = default_spi_write_256, }; +static void serprog_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr); +static uint8_t serprog_chip_readb(const struct flashctx *flash, + const chipaddr addr); +static void serprog_chip_readn(const struct flashctx *flash, uint8_t *buf, + const chipaddr addr, size_t len); static const struct par_programmer par_programmer_serprog = { .chip_readb = serprog_chip_readb, .chip_readw = fallback_chip_readw, @@ -680,7 +687,8 @@ } } -void serprog_chip_writeb(uint8_t val, chipaddr addr) +static void serprog_chip_writeb(const struct flashctx *flash, uint8_t val, + chipaddr addr) { msg_pspew("%s\n", __func__); if (sp_max_write_n) { @@ -711,7 +719,8 @@ } } -uint8_t serprog_chip_readb(const chipaddr addr) +static uint8_t serprog_chip_readb(const struct flashctx *flash, + const chipaddr addr) { unsigned char c; unsigned char buf[3]; @@ -757,7 +766,8 @@ } /* The externally called version that makes sure that max_read_n is obeyed. */ -void serprog_chip_readn(uint8_t * buf, const chipaddr addr, size_t len) +static void serprog_chip_readn(const struct flashctx *flash, uint8_t * buf, + const chipaddr addr, size_t len) { size_t lenm = len; chipaddr addrm = addr; @@ -792,9 +802,10 @@ sp_prev_was_write = 0; } -static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, - unsigned char *readarr) +static int serprog_spi_send_command(struct flashctx *flash, + unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { unsigned char *parmbuf; int ret; @@ -822,14 +833,15 @@ * the advantage that it is much faster for most chips, but breaks those with * non-contiguous address space (like AT45DB161D). When spi_read_chunked is * fixed this method can be removed. */ -static int serprog_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +static int serprog_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) { unsigned int i, cur_len; const unsigned int max_read = spi_programmer_serprog.max_data_read; for (i = 0; i < len; i += cur_len) { int ret; cur_len = min(max_read, (len - i)); - ret = spi_nbyte_read(start + i, buf + i, cur_len); + ret = spi_nbyte_read(flash, start + i, buf + i, cur_len); if (ret) return ret; } Modified: trunk/sharplhf00l04.c ============================================================================== --- trunk/sharplhf00l04.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/sharplhf00l04.c Sun Dec 18 16:01:24 2011 (r1474) @@ -26,25 +26,26 @@ * FIXME: This file is unused. */ -int erase_lhf00l04_block(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen) +int erase_lhf00l04_block(struct flashctx *flash, unsigned int blockaddr, + unsigned int blocklen) { chipaddr bios = flash->virtual_memory + blockaddr; chipaddr wrprotect = flash->virtual_registers + blockaddr + 2; uint8_t status; // clear status register - chip_writeb(0x50, bios); + chip_writeb(flash, 0x50, bios); status = wait_82802ab(flash); print_status_82802ab(status); // clear write protect msg_cspew("write protect is at 0x%lx\n", (wrprotect)); - msg_cspew("write protect is 0x%x\n", chip_readb(wrprotect)); - chip_writeb(0, wrprotect); - msg_cspew("write protect is 0x%x\n", chip_readb(wrprotect)); + msg_cspew("write protect is 0x%x\n", chip_readb(flash, wrprotect)); + chip_writeb(flash, 0, wrprotect); + msg_cspew("write protect is 0x%x\n", chip_readb(flash, wrprotect)); // now start it - chip_writeb(0x20, bios); - chip_writeb(0xd0, bios); + chip_writeb(flash, 0x20, bios); + chip_writeb(flash, 0xd0, bios); programmer_delay(10); // now let's see what the register is status = wait_82802ab(flash); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -42,8 +42,9 @@ const struct spi_programmer *spi_programmer = &spi_programmer_none; -int spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +int spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, const unsigned char *writearr, + unsigned char *readarr) { if (!spi_programmer->command) { msg_perr("%s called, but SPI is unsupported on this " @@ -52,11 +53,11 @@ return 1; } - return spi_programmer->command(writecnt, readcnt, - writearr, readarr); + return spi_programmer->command(flash, writecnt, readcnt, writearr, + readarr); } -int spi_send_multicommand(struct spi_command *cmds) +int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds) { if (!spi_programmer->multicommand) { msg_perr("%s called, but SPI is unsupported on this " @@ -65,11 +66,13 @@ return 1; } - return spi_programmer->multicommand(cmds); + return spi_programmer->multicommand(flash, cmds); } -int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +int default_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { struct spi_command cmd[] = { { @@ -84,20 +87,22 @@ .readarr = NULL, }}; - return spi_send_multicommand(cmd); + return spi_send_multicommand(flash, cmd); } -int default_spi_send_multicommand(struct spi_command *cmds) +int default_spi_send_multicommand(struct flashctx *flash, + struct spi_command *cmds) { int result = 0; for (; (cmds->writecnt || cmds->readcnt) && !result; cmds++) { - result = spi_send_command(cmds->writecnt, cmds->readcnt, + result = spi_send_command(flash, cmds->writecnt, cmds->readcnt, cmds->writearr, cmds->readarr); } return result; } -int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len) { unsigned int max_data = spi_programmer->max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { @@ -109,7 +114,8 @@ return spi_read_chunked(flash, buf, start, len, max_data); } -int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int default_spi_write_256(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) { unsigned int max_data = spi_programmer->max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { @@ -121,7 +127,8 @@ return spi_write_chunked(flash, buf, start, len, max_data); } -int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len) { unsigned int addrbase = 0; if (!spi_programmer->read) { @@ -135,7 +142,7 @@ * address. Highest possible address with the current SPI implementation * means 0xffffff, the highest unsigned 24bit number. */ - addrbase = spi_get_valid_read_addr(); + addrbase = spi_get_valid_read_addr(flash); if (addrbase + flash->total_size * 1024 > (1 << 24)) { msg_perr("Flash chip size exceeds the allowed access window. "); msg_perr("Read will probably fail.\n"); @@ -160,7 +167,8 @@ * .write_256 = spi_chip_write_1 */ /* real chunksize is up to 256, logical chunksize is 256 */ -int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len) { if (!spi_programmer->write_256) { msg_perr("%s called, but SPI page write is unsupported on this " @@ -177,7 +185,7 @@ * be the lowest allowed address for all commands which take an address. * This is a programmer limitation. */ -uint32_t spi_get_valid_read_addr(void) +uint32_t spi_get_valid_read_addr(struct flashctx *flash) { switch (spi_programmer->type) { #if CONFIG_INTERNAL == 1 Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/spi25.c Sun Dec 18 16:01:24 2011 (r1474) @@ -29,13 +29,13 @@ #include "programmer.h" #include "spi.h" -static int spi_rdid(unsigned char *readarr, int bytes) +static int spi_rdid(struct flashctx *flash, unsigned char *readarr, int bytes) { static const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID }; int ret; int i; - ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr); if (ret) return ret; msg_cspew("RDID returned"); @@ -45,20 +45,22 @@ return 0; } -static int spi_rems(unsigned char *readarr) +static int spi_rems(struct flashctx *flash, unsigned char *readarr) { unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 }; uint32_t readaddr; int ret; - ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE, cmd, + readarr); if (ret == SPI_INVALID_ADDRESS) { /* Find the lowest even address allowed for reads. */ - readaddr = (spi_get_valid_read_addr() + 1) & ~1; + readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1; cmd[1] = (readaddr >> 16) & 0xff, cmd[2] = (readaddr >> 8) & 0xff, cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE, + cmd, readarr); } if (ret) return ret; @@ -66,21 +68,21 @@ return 0; } -static int spi_res(unsigned char *readarr, int bytes) +static int spi_res(struct flashctx *flash, unsigned char *readarr, int bytes) { unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; uint32_t readaddr; int ret; int i; - ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr); if (ret == SPI_INVALID_ADDRESS) { /* Find the lowest even address allowed for reads. */ - readaddr = (spi_get_valid_read_addr() + 1) & ~1; + readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1; cmd[1] = (readaddr >> 16) & 0xff, cmd[2] = (readaddr >> 8) & 0xff, cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr); } if (ret) return ret; @@ -91,13 +93,13 @@ return 0; } -int spi_write_enable(void) +int spi_write_enable(struct flashctx *flash) { static const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN }; int result; /* Send WREN (Write Enable) */ - result = spi_send_command(sizeof(cmd), 0, cmd, NULL); + result = spi_send_command(flash, sizeof(cmd), 0, cmd, NULL); if (result) msg_cerr("%s failed\n", __func__); @@ -105,12 +107,12 @@ return result; } -int spi_write_disable(void) +int spi_write_disable(struct flashctx *flash) { static const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI }; /* Send WRDI (Write Disable) */ - return spi_send_command(sizeof(cmd), 0, cmd, NULL); + return spi_send_command(flash, sizeof(cmd), 0, cmd, NULL); } static int probe_spi_rdid_generic(struct flashctx *flash, int bytes) @@ -119,7 +121,7 @@ uint32_t id1; uint32_t id2; - if (spi_rdid(readarr, bytes)) { + if (spi_rdid(flash, readarr, bytes)) { return 0; } @@ -199,7 +201,7 @@ unsigned char readarr[JEDEC_REMS_INSIZE]; uint32_t id1, id2; - if (spi_rems(readarr)) { + if (spi_rems(flash, readarr)) { return 0; } @@ -242,7 +244,7 @@ /* Check if RDID is usable and does not return 0xff 0xff 0xff or * 0x00 0x00 0x00. In that case, RES is pointless. */ - if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) && + if (!spi_rdid(flash, readarr, 3) && memcmp(readarr, allff, 3) && memcmp(readarr, all00, 3)) { msg_cdbg("Ignoring RES in favour of RDID.\n"); return 0; @@ -250,13 +252,14 @@ /* Check if REMS is usable and does not return 0xff 0xff or * 0x00 0x00. In that case, RES is pointless. */ - if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) && + if (!spi_rems(flash, readarr) && + memcmp(readarr, allff, JEDEC_REMS_INSIZE) && memcmp(readarr, all00, JEDEC_REMS_INSIZE)) { msg_cdbg("Ignoring RES in favour of REMS.\n"); return 0; } - if (spi_res(readarr, 1)) { + if (spi_res(flash, readarr, 1)) { return 0; } @@ -279,7 +282,7 @@ unsigned char readarr[2]; uint32_t id1, id2; - if (spi_res(readarr, 2)) { + if (spi_res(flash, readarr, 2)) { return 0; } @@ -298,7 +301,7 @@ return 1; } -uint8_t spi_read_status_register(void) +uint8_t spi_read_status_register(struct flashctx *flash) { static const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR }; /* FIXME: No workarounds for driver/hardware bugs in generic code. */ @@ -306,7 +309,8 @@ int ret; /* Read Status Register */ - ret = spi_send_command(sizeof(cmd), sizeof(readarr), cmd, readarr); + ret = spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, + readarr); if (ret) msg_cerr("RDSR failed!\n"); @@ -414,7 +418,7 @@ { uint8_t status; - status = spi_read_status_register(); + status = spi_read_status_register(flash); msg_cdbg("Chip status register is %02x\n", status); switch (flash->manufacture_id) { case ST_ID: @@ -465,7 +469,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution\n", __func__); @@ -475,7 +479,7 @@ * This usually takes 1-85 s, so wait in 1 s steps. */ /* FIXME: We assume spi_read_status_register will never fail. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(1000 * 1000); /* FIXME: Check the status register for errors. */ return 0; @@ -502,7 +506,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution\n", __func__); return result; @@ -511,13 +515,14 @@ * This usually takes 1-85 s, so wait in 1 s steps. */ /* FIXME: We assume spi_read_status_register will never fail. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(1000 * 1000); /* FIXME: Check the status register for errors. */ return 0; } -int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_52(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -543,7 +548,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -552,7 +557,7 @@ /* Wait until the Write-In-Progress bit is cleared. * This usually takes 100-4000 ms, so wait in 100 ms steps. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(100 * 1000); /* FIXME: Check the status register for errors. */ return 0; @@ -563,7 +568,8 @@ * 32k for SST * 4-32k non-uniform for EON */ -int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -589,7 +595,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -598,7 +604,7 @@ /* Wait until the Write-In-Progress bit is cleared. * This usually takes 100-4000 ms, so wait in 100 ms steps. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(100 * 1000); /* FIXME: Check the status register for errors. */ return 0; @@ -607,7 +613,8 @@ /* Block size is usually * 4k for PMC */ -int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -633,7 +640,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -642,14 +649,15 @@ /* Wait until the Write-In-Progress bit is cleared. * This usually takes 100-4000 ms, so wait in 100 ms steps. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(100 * 1000); /* FIXME: Check the status register for errors. */ return 0; } /* Sector size is usually 4k, though Macronix eliteflash has 64k */ -int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_20(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -675,7 +683,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -684,13 +692,14 @@ /* Wait until the Write-In-Progress bit is cleared. * This usually takes 15-800 ms, so wait in 10 ms steps. */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(10 * 1000); /* FIXME: Check the status register for errors. */ return 0; } -int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_60(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", @@ -700,7 +709,8 @@ return spi_chip_erase_60(flash); } -int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", @@ -710,13 +720,13 @@ return spi_chip_erase_c7(flash); } -int spi_write_status_enable(void) +int spi_write_status_enable(struct flashctx *flash) { static const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; int result; /* Send EWSR (Enable Write Status Register). */ - result = spi_send_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); + result = spi_send_command(flash, sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); if (result) msg_cerr("%s failed\n", __func__); @@ -751,7 +761,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution\n", __func__); @@ -766,7 +776,7 @@ * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. */ programmer_delay(100 * 1000); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) { + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) { if (++i > 490) { msg_cerr("Error: WIP bit after WRSR never cleared\n"); return TIMEOUT_ERROR; @@ -799,7 +809,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution\n", __func__); @@ -814,7 +824,7 @@ * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. */ programmer_delay(100 * 1000); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) { + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) { if (++i > 490) { msg_cerr("Error: WIP bit after WRSR never cleared\n"); return TIMEOUT_ERROR; @@ -840,7 +850,8 @@ return ret; } -int spi_byte_program(unsigned int addr, uint8_t databyte) +int spi_byte_program(struct flashctx *flash, unsigned int addr, + uint8_t databyte) { int result; struct spi_command cmds[] = { @@ -867,7 +878,7 @@ .readarr = NULL, }}; - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -875,7 +886,8 @@ return result; } -int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len) +int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes, + unsigned int len) { int result; /* FIXME: Switch to malloc based on len unless that kills speed. */ @@ -914,7 +926,7 @@ memcpy(&cmd[4], bytes, len); - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); @@ -931,7 +943,7 @@ uint8_t status; int result; - status = spi_read_status_register(); + status = spi_read_status_register(flash); /* If block protection is disabled, stop here. */ if ((status & 0x3c) == 0) return 0; @@ -942,7 +954,7 @@ msg_cerr("spi_write_status_register failed\n"); return result; } - status = spi_read_status_register(); + status = spi_read_status_register(flash); if ((status & 0x3c) != 0) { msg_cerr("Block protection could not be disabled!\n"); return 1; @@ -950,7 +962,8 @@ return 0; } -int spi_nbyte_read(unsigned int address, uint8_t *bytes, unsigned int len) +int spi_nbyte_read(struct flashctx *flash, unsigned int address, uint8_t *bytes, + unsigned int len) { const unsigned char cmd[JEDEC_READ_OUTSIZE] = { JEDEC_READ, @@ -960,7 +973,7 @@ }; /* Send Read */ - return spi_send_command(sizeof(cmd), len, cmd, bytes); + return spi_send_command(flash, sizeof(cmd), len, cmd, bytes); } /* @@ -968,7 +981,8 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is read separately in chunks with a maximum size of chunksize. */ -int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) +int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len, unsigned int chunksize) { int rc = 0; unsigned int i, j, starthere, lenhere, toread; @@ -991,7 +1005,7 @@ lenhere = min(start + len, (i + 1) * page_size) - starthere; for (j = 0; j < lenhere; j += chunksize) { toread = min(chunksize, lenhere - j); - rc = spi_nbyte_read(starthere + j, buf + starthere - start + j, toread); + rc = spi_nbyte_read(flash, starthere + j, buf + starthere - start + j, toread); if (rc) break; } @@ -1007,7 +1021,8 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is written separately in chunks with a maximum size of chunksize. */ -int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) +int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len, unsigned int chunksize) { int rc = 0; unsigned int i, j, starthere, lenhere, towrite; @@ -1035,10 +1050,10 @@ lenhere = min(start + len, (i + 1) * page_size) - starthere; for (j = 0; j < lenhere; j += chunksize) { towrite = min(chunksize, lenhere - j); - rc = spi_nbyte_program(starthere + j, buf + starthere - start + j, towrite); + rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite); if (rc) break; - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(10); } if (rc) @@ -1055,23 +1070,25 @@ * (e.g. due to size constraints in IT87* for over 512 kB) */ /* real chunksize is 1, logical chunksize is 1 */ -int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len) { unsigned int i; int result = 0; for (i = start; i < start + len; i++) { - result = spi_byte_program(i, buf[i - start]); + result = spi_byte_program(flash, i, buf[i - start]); if (result) return 1; - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(10); } return 0; } -int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, + unsigned int len) { uint32_t pos = start; int result; @@ -1149,7 +1166,7 @@ } - result = spi_send_multicommand(cmds); + result = spi_send_multicommand(flash, cmds); if (result) { msg_cerr("%s failed during start command execution\n", __func__); @@ -1158,7 +1175,7 @@ */ return result; } - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(10); /* We already wrote 2 bytes in the multicommand step. */ @@ -1168,15 +1185,16 @@ while (pos < start + len - 1) { cmd[1] = buf[pos++ - start]; cmd[2] = buf[pos++ - start]; - spi_send_command(JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0, cmd, NULL); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0, + cmd, NULL); + while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) programmer_delay(10); } /* Use WRDI to exit AAI mode. This needs to be done before issuing any * other non-AAI command. */ - spi_write_disable(); + spi_write_disable(flash); /* Write remaining byte (if any). */ if (pos < start + len) { Modified: trunk/sst28sf040.c ============================================================================== --- trunk/sst28sf040.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/sst28sf040.c Sun Dec 18 16:01:24 2011 (r1474) @@ -34,13 +34,13 @@ { chipaddr bios = flash->virtual_memory; - chip_readb(bios + 0x1823); - chip_readb(bios + 0x1820); - chip_readb(bios + 0x1822); - chip_readb(bios + 0x0418); - chip_readb(bios + 0x041B); - chip_readb(bios + 0x0419); - chip_readb(bios + 0x040A); + chip_readb(flash, bios + 0x1823); + chip_readb(flash, bios + 0x1820); + chip_readb(flash, bios + 0x1822); + chip_readb(flash, bios + 0x0418); + chip_readb(flash, bios + 0x041B); + chip_readb(flash, bios + 0x0419); + chip_readb(flash, bios + 0x040A); return 0; } @@ -49,34 +49,36 @@ { chipaddr bios = flash->virtual_memory; - chip_readb(bios + 0x1823); - chip_readb(bios + 0x1820); - chip_readb(bios + 0x1822); - chip_readb(bios + 0x0418); - chip_readb(bios + 0x041B); - chip_readb(bios + 0x0419); - chip_readb(bios + 0x041A); + chip_readb(flash, bios + 0x1823); + chip_readb(flash, bios + 0x1820); + chip_readb(flash, bios + 0x1822); + chip_readb(flash, bios + 0x0418); + chip_readb(flash, bios + 0x041B); + chip_readb(flash, bios + 0x0419); + chip_readb(flash, bios + 0x041A); return 0; } -int erase_sector_28sf040(struct flashctx *flash, unsigned int address, unsigned int sector_size) +int erase_sector_28sf040(struct flashctx *flash, unsigned int address, + unsigned int sector_size) { chipaddr bios = flash->virtual_memory; /* This command sequence is very similar to erase_block_82802ab. */ - chip_writeb(AUTO_PG_ERASE1, bios); - chip_writeb(AUTO_PG_ERASE2, bios + address); + chip_writeb(flash, AUTO_PG_ERASE1, bios); + chip_writeb(flash, AUTO_PG_ERASE2, bios + address); /* wait for Toggle bit ready */ - toggle_ready_jedec(bios); + toggle_ready_jedec(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } /* chunksize is 1 */ -int write_28sf040(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_28sf040(struct flashctx *flash, uint8_t *src, unsigned int start, + unsigned int len) { int i; chipaddr bios = flash->virtual_memory; @@ -90,11 +92,11 @@ continue; } /*issue AUTO PROGRAM command */ - chip_writeb(AUTO_PGRM, dst); - chip_writeb(*src++, dst++); + chip_writeb(flash, AUTO_PGRM, dst); + chip_writeb(flash, *src++, dst++); /* wait for Toggle bit ready */ - toggle_ready_jedec(bios); + toggle_ready_jedec(flash, bios); } return 0; @@ -104,17 +106,18 @@ { chipaddr bios = flash->virtual_memory; - chip_writeb(CHIP_ERASE, bios); - chip_writeb(CHIP_ERASE, bios); + chip_writeb(flash, CHIP_ERASE, bios); + chip_writeb(flash, CHIP_ERASE, bios); programmer_delay(10); - toggle_ready_jedec(bios); + toggle_ready_jedec(flash, bios); /* FIXME: Check the status register for errors. */ return 0; } -int erase_chip_28sf040(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +int erase_chip_28sf040(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/sst49lfxxxc.c Sun Dec 18 16:01:24 2011 (r1474) @@ -23,11 +23,14 @@ #include "flash.h" #include "chipdrivers.h" -static int write_lockbits_block_49lfxxxc(struct flashctx *flash, unsigned long address, unsigned char bits) +static int write_lockbits_block_49lfxxxc(struct flashctx *flash, + unsigned long address, + unsigned char bits) { unsigned long lock = flash->virtual_registers + address + 2; - msg_cdbg("lockbits at address=0x%08lx is 0x%01x\n", lock, chip_readb(lock)); - chip_writeb(bits, lock); + msg_cdbg("lockbits at address=0x%08lx is 0x%01x\n", lock, + chip_readb(flash, lock)); + chip_writeb(flash, bits, lock); return 0; } @@ -59,13 +62,14 @@ return write_lockbits_49lfxxxc(flash, 0); } -int erase_sector_49lfxxxc(struct flashctx *flash, unsigned int address, unsigned int sector_size) +int erase_sector_49lfxxxc(struct flashctx *flash, unsigned int address, + unsigned int sector_size) { uint8_t status; chipaddr bios = flash->virtual_memory; - chip_writeb(0x30, bios); - chip_writeb(0xD0, bios + address); + chip_writeb(flash, 0x30, bios); + chip_writeb(flash, 0xD0, bios + address); status = wait_82802ab(flash); print_status_82802ab(status); Modified: trunk/sst_fwhub.c ============================================================================== --- trunk/sst_fwhub.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/sst_fwhub.c Sun Dec 18 16:01:24 2011 (r1474) @@ -29,7 +29,7 @@ chipaddr registers = flash->virtual_registers; uint8_t blockstatus; - blockstatus = chip_readb(registers + offset + 2); + blockstatus = chip_readb(flash, registers + offset + 2); msg_cdbg("Lock status for 0x%06x (size 0x%06x) is %02x, ", offset, flash->page_size, blockstatus); switch (blockstatus & 0x3) { @@ -59,7 +59,7 @@ if (blockstatus) { msg_cdbg("Trying to clear lock for 0x%06x... ", offset); - chip_writeb(0, registers + offset + 2); + chip_writeb(flash, 0, registers + offset + 2); blockstatus = check_sst_fwhub_block_lock(flash, offset); msg_cdbg("%s\n", (blockstatus) ? "failed" : "OK"); Modified: trunk/stm50flw0x0x.c ============================================================================== --- trunk/stm50flw0x0x.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/stm50flw0x0x.c Sun Dec 18 16:01:24 2011 (r1474) @@ -60,8 +60,10 @@ // unlock each 4k-sector for (j = 0; j < 0x10000; j += 0x1000) { msg_cdbg("unlocking at 0x%x\n", offset + j); - chip_writeb(unlock_sector, wrprotect + offset + j); - if (chip_readb(wrprotect + offset + j) != unlock_sector) { + chip_writeb(flash, unlock_sector, + wrprotect + offset + j); + if (chip_readb(flash, wrprotect + offset + j) != + unlock_sector) { msg_cerr("Cannot unlock sector @ 0x%x\n", offset + j); return -1; @@ -69,8 +71,8 @@ } } else { msg_cdbg("unlocking at 0x%x\n", offset); - chip_writeb(unlock_sector, wrprotect + offset); - if (chip_readb(wrprotect + offset) != unlock_sector) { + chip_writeb(flash, unlock_sector, wrprotect + offset); + if (chip_readb(flash, wrprotect + offset) != unlock_sector) { msg_cerr("Cannot unlock sector @ 0x%x\n", offset); return -1; } @@ -94,15 +96,16 @@ } /* This function is unused. */ -int erase_sector_stm50flw0x0x(struct flashctx *flash, unsigned int sector, unsigned int sectorsize) +int erase_sector_stm50flw0x0x(struct flashctx *flash, unsigned int sector, + unsigned int sectorsize) { chipaddr bios = flash->virtual_memory + sector; // clear status register - chip_writeb(0x50, bios); + chip_writeb(flash, 0x50, bios); // now start it - chip_writeb(0x32, bios); - chip_writeb(0xd0, bios); + chip_writeb(flash, 0x32, bios); + chip_writeb(flash, 0xd0, bios); programmer_delay(10); wait_82802ab(flash); Modified: trunk/w29ee011.c ============================================================================== --- trunk/w29ee011.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/w29ee011.c Sun Dec 18 16:01:24 2011 (r1474) @@ -38,29 +38,29 @@ } /* Issue JEDEC Product ID Entry command */ - chip_writeb(0xAA, bios + 0x5555); + chip_writeb(flash, 0xAA, bios + 0x5555); programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); + chip_writeb(flash, 0x55, bios + 0x2AAA); programmer_delay(10); - chip_writeb(0x80, bios + 0x5555); + chip_writeb(flash, 0x80, bios + 0x5555); programmer_delay(10); - chip_writeb(0xAA, bios + 0x5555); + chip_writeb(flash, 0xAA, bios + 0x5555); programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); + chip_writeb(flash, 0x55, bios + 0x2AAA); programmer_delay(10); - chip_writeb(0x60, bios + 0x5555); + chip_writeb(flash, 0x60, bios + 0x5555); programmer_delay(10); /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); + id1 = chip_readb(flash, bios); + id2 = chip_readb(flash, bios + 0x01); /* Issue JEDEC Product ID Exit command */ - chip_writeb(0xAA, bios + 0x5555); + chip_writeb(flash, 0xAA, bios + 0x5555); programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); + chip_writeb(flash, 0x55, bios + 0x2AAA); programmer_delay(10); - chip_writeb(0xF0, bios + 0x5555); + chip_writeb(flash, 0xF0, bios + 0x5555); programmer_delay(10); msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); Modified: trunk/w39.c ============================================================================== --- trunk/w39.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/w39.c Sun Dec 18 16:01:24 2011 (r1474) @@ -26,7 +26,7 @@ chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; - locking = chip_readb(wrprotect); + locking = chip_readb(flash, wrprotect); msg_cdbg("Lock status of block at 0x%08x is ", offset); switch (locking & 0x7) { case 0: @@ -64,7 +64,7 @@ chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; - locking = chip_readb(wrprotect); + locking = chip_readb(flash, wrprotect); /* Read or write lock present? */ if (locking & ((1 << 2) | (1 << 0))) { /* Lockdown active? */ @@ -73,7 +73,7 @@ return -1; } else { msg_cdbg("Unlocking block at 0x%08x\n", offset); - chip_writeb(0, wrprotect); + chip_writeb(flash, 0, wrprotect); } } @@ -86,18 +86,18 @@ uint8_t val; /* Product Identification Entry */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0x90, bios + 0x5555); + chip_writeb(flash, 0xAA, bios + 0x5555); + chip_writeb(flash, 0x55, bios + 0x2AAA); + chip_writeb(flash, 0x90, bios + 0x5555); programmer_delay(10); /* Read something, maybe hardware lock bits */ - val = chip_readb(bios + offset); + val = chip_readb(flash, bios + offset); /* Product Identification Exit */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); + chip_writeb(flash, 0xAA, bios + 0x5555); + chip_writeb(flash, 0x55, bios + 0x2AAA); + chip_writeb(flash, 0xF0, bios + 0x5555); programmer_delay(10); return val; @@ -160,7 +160,7 @@ return 0; } -int printlock_w39l040(struct flashctx * flash) +int printlock_w39l040(struct flashctx *flash) { uint8_t lock; int ret; Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Wed Dec 14 23:25:15 2011 (r1473) +++ trunk/wbsio_spi.c Sun Dec 18 16:01:24 2011 (r1474) @@ -60,9 +60,12 @@ return flashport; } -static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); +static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_wbsio = { .type = SPI_CONTROLLER_WBSIO, @@ -110,8 +113,10 @@ * Would one more byte of RAM in the chip (to get all 24 bits) really make * such a big difference? */ -static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr) +static int wbsio_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) { int i; uint8_t mode = 0; @@ -194,7 +199,8 @@ return 0; } -static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) +static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) { return read_memmapped(flash, buf, start, len); }

1 0

flash operation log
by Adam Kalaska 18 Dec '11

18 Dec '11

for Your request send my logs all operation success thanks

1 0

Asus M2N
by AlexALX 15 Dec '11

15 Dec '11

"Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks." Sending - Motherboard M2N and log file in attachment.

1 0

[commit] r1473 - trunk
by repository service 14 Dec '11

14 Dec '11

Author: hailfinger Date: Wed Dec 14 23:25:15 2011 New Revision: 1473 URL: http://flashrom.org/trac/flashrom/changeset/1473 Log: Use struct flashctx instead of struct flashchip for flash chip access struct flashchip is used only for the flashchips array and for operations which do not access hardware, e.g. printing a list of supported flash chips. struct flashctx (flash context) contains all data available in struct flashchip, but it also contains runtime information like mapping addresses. struct flashctx is expected to grow additional members over time, a prime candidate being programmer info. struct flashctx contains all of struct flashchip with identical member layout, but struct flashctx has additional members at the end. The separation between struct flashchip/flashctx shrinks the memory requirement of the big flashchips array and allows future extension of flashctx without having to worry about bloat. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/82802ab.c trunk/a25.c trunk/at25.c trunk/chipdrivers.h trunk/cli_classic.c trunk/dediprog.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.c trunk/ichspi.c trunk/it87spi.c trunk/jedec.c trunk/layout.c trunk/linux_spi.c trunk/m29f400bt.c trunk/opaque.c trunk/pm49fl00x.c trunk/programmer.h trunk/serprog.c trunk/sharplhf00l04.c trunk/spi.c trunk/spi25.c trunk/sst28sf040.c trunk/sst49lfxxxc.c trunk/sst_fwhub.c trunk/stm50flw0x0x.c trunk/w29ee011.c trunk/w39.c trunk/wbsio_spi.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/82802ab.c Wed Dec 14 23:25:15 2011 (r1473) @@ -40,7 +40,7 @@ msg_cdbg("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:"); } -int probe_82802ab(struct flashchip *flash) +int probe_82802ab(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; uint8_t id1, id2, flashcontent1, flashcontent2; @@ -89,7 +89,7 @@ return 1; } -uint8_t wait_82802ab(struct flashchip *flash) +uint8_t wait_82802ab(struct flashctx *flash) { uint8_t status; chipaddr bios = flash->virtual_memory; @@ -107,7 +107,7 @@ return status; } -int unlock_82802ab(struct flashchip *flash) +int unlock_82802ab(struct flashctx *flash) { int i; //chipaddr wrprotect = flash->virtual_registers + page + 2; @@ -118,7 +118,7 @@ return 0; } -int erase_block_82802ab(struct flashchip *flash, unsigned int page, +int erase_block_82802ab(struct flashctx *flash, unsigned int page, unsigned int pagesize) { chipaddr bios = flash->virtual_memory; @@ -141,7 +141,7 @@ } /* chunksize is 1 */ -int write_82802ab(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_82802ab(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr dst = flash->virtual_memory + start; @@ -157,7 +157,7 @@ return 0; } -int unlock_28f004s5(struct flashchip *flash) +int unlock_28f004s5(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; @@ -209,7 +209,7 @@ return 0; } -int unlock_lh28f008bjt(struct flashchip *flash) +int unlock_lh28f008bjt(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; uint8_t mcfg, bcfg; Modified: trunk/a25.c ============================================================================== --- trunk/a25.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/a25.c Wed Dec 14 23:25:15 2011 (r1473) @@ -29,7 +29,7 @@ "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); } -int spi_prettyprint_status_register_amic_a25l05p(struct flashchip *flash) +int spi_prettyprint_status_register_amic_a25l05p(struct flashctx *flash) { uint8_t status; @@ -45,7 +45,7 @@ return 0; } -int spi_prettyprint_status_register_amic_a25l40p(struct flashchip *flash) +int spi_prettyprint_status_register_amic_a25l40p(struct flashctx *flash) { uint8_t status; @@ -60,7 +60,7 @@ return 0; } -int spi_prettyprint_status_register_amic_a25l032(struct flashchip *flash) +int spi_prettyprint_status_register_amic_a25l032(struct flashctx *flash) { uint8_t status; @@ -78,7 +78,7 @@ return 0; } -int spi_prettyprint_status_register_amic_a25lq032(struct flashchip *flash) +int spi_prettyprint_status_register_amic_a25lq032(struct flashctx *flash) { uint8_t status; Modified: trunk/at25.c ============================================================================== --- trunk/at25.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/at25.c Wed Dec 14 23:25:15 2011 (r1473) @@ -57,7 +57,7 @@ } } -int spi_prettyprint_status_register_at25df(struct flashchip *flash) +int spi_prettyprint_status_register_at25df(struct flashctx *flash) { uint8_t status; @@ -72,7 +72,7 @@ return 0; } -int spi_prettyprint_status_register_at25df_sec(struct flashchip *flash) +int spi_prettyprint_status_register_at25df_sec(struct flashctx *flash) { /* FIXME: We should check the security lockdown. */ msg_cdbg("Ignoring security lockdown (if present)\n"); @@ -80,7 +80,7 @@ return spi_prettyprint_status_register_at25df(flash); } -int spi_prettyprint_status_register_at25f(struct flashchip *flash) +int spi_prettyprint_status_register_at25f(struct flashctx *flash) { uint8_t status; @@ -99,7 +99,7 @@ return 0; } -int spi_prettyprint_status_register_at25fs010(struct flashchip *flash) +int spi_prettyprint_status_register_at25fs010(struct flashctx *flash) { uint8_t status; @@ -123,7 +123,7 @@ return 0; } -int spi_prettyprint_status_register_at25fs040(struct flashchip *flash) +int spi_prettyprint_status_register_at25fs040(struct flashctx *flash) { uint8_t status; @@ -147,7 +147,7 @@ return 0; } -int spi_prettyprint_status_register_atmel_at26df081a(struct flashchip *flash) +int spi_prettyprint_status_register_atmel_at26df081a(struct flashctx *flash) { uint8_t status; @@ -163,7 +163,7 @@ return 0; } -int spi_disable_blockprotect_at25df(struct flashchip *flash) +int spi_disable_blockprotect_at25df(struct flashctx *flash) { uint8_t status; int result; @@ -203,14 +203,14 @@ return 0; } -int spi_disable_blockprotect_at25df_sec(struct flashchip *flash) +int spi_disable_blockprotect_at25df_sec(struct flashctx *flash) { /* FIXME: We should check the security lockdown. */ msg_cinfo("Ignoring security lockdown (if present)\n"); return spi_disable_blockprotect_at25df(flash); } -int spi_disable_blockprotect_at25f(struct flashchip *flash) +int spi_disable_blockprotect_at25f(struct flashctx *flash) { /* spi_disable_blockprotect_at25df is not really the right way to do * this, but the side effects of said function work here as well. @@ -218,7 +218,7 @@ return spi_disable_blockprotect_at25df(flash); } -int spi_disable_blockprotect_at25fs010(struct flashchip *flash) +int spi_disable_blockprotect_at25fs010(struct flashctx *flash) { uint8_t status; int result; @@ -252,7 +252,7 @@ return 0; } -int spi_disable_blockprotect_at25fs040(struct flashchip *flash) +int spi_disable_blockprotect_at25fs040(struct flashctx *flash) { uint8_t status; int result; Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/chipdrivers.h Wed Dec 14 23:25:15 2011 (r1473) @@ -19,79 +19,79 @@ * * Header file for flash chip drivers. Included from flash.h. * As a general rule, every function listed here should take a pointer to - * struct flashchip as first parameter. + * struct flashctx as first parameter. */ #ifndef __CHIPDRIVERS_H__ #define __CHIPDRIVERS_H__ 1 -#include "flash.h" /* for chipaddr and flashchip */ +#include "flash.h" /* for chipaddr and flashctx */ /* spi.c, should probably be in spi_chip.c */ -int probe_spi_rdid(struct flashchip *flash); -int probe_spi_rdid4(struct flashchip *flash); -int probe_spi_rems(struct flashchip *flash); -int probe_spi_res1(struct flashchip *flash); -int probe_spi_res2(struct flashchip *flash); +int probe_spi_rdid(struct flashctx *flash); +int probe_spi_rdid4(struct flashctx *flash); +int probe_spi_rems(struct flashctx *flash); +int probe_spi_res1(struct flashctx *flash); +int probe_spi_res2(struct flashctx *flash); int spi_write_enable(void); int spi_write_disable(void); -int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len); +int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len); uint8_t spi_read_status_register(void); -int spi_write_status_register(struct flashchip *flash, int status); +int spi_write_status_register(struct flashctx *flash, int status); void spi_prettyprint_status_register_bit(uint8_t status, int bit); void spi_prettyprint_status_register_bp3210(uint8_t status, int bp); void spi_prettyprint_status_register_welwip(uint8_t status); -int spi_prettyprint_status_register(struct flashchip *flash); -int spi_disable_blockprotect(struct flashchip *flash); +int spi_prettyprint_status_register(struct flashctx *flash); +int spi_disable_blockprotect(struct flashctx *flash); int spi_byte_program(unsigned int addr, uint8_t databyte); int spi_nbyte_program(unsigned int addr, uint8_t *bytes, unsigned int len); int spi_nbyte_read(unsigned int addr, uint8_t *bytes, unsigned int len); -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); -int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); +int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); /* opaque.c */ -int probe_opaque(struct flashchip *flash); -int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); +int probe_opaque(struct flashctx *flash); +int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int erase_opaque(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen); /* a25.c */ -int spi_prettyprint_status_register_amic_a25l05p(struct flashchip *flash); -int spi_prettyprint_status_register_amic_a25l40p(struct flashchip *flash); -int spi_prettyprint_status_register_amic_a25l032(struct flashchip *flash); -int spi_prettyprint_status_register_amic_a25lq032(struct flashchip *flash); +int spi_prettyprint_status_register_amic_a25l05p(struct flashctx *flash); +int spi_prettyprint_status_register_amic_a25l40p(struct flashctx *flash); +int spi_prettyprint_status_register_amic_a25l032(struct flashctx *flash); +int spi_prettyprint_status_register_amic_a25lq032(struct flashctx *flash); /* at25.c */ -int spi_prettyprint_status_register_at25df(struct flashchip *flash); -int spi_prettyprint_status_register_at25df_sec(struct flashchip *flash); -int spi_prettyprint_status_register_at25f(struct flashchip *flash); -int spi_prettyprint_status_register_at25fs010(struct flashchip *flash); -int spi_prettyprint_status_register_at25fs040(struct flashchip *flash); -int spi_prettyprint_status_register_atmel_at26df081a(struct flashchip *flash); -int spi_disable_blockprotect_at25df(struct flashchip *flash); -int spi_disable_blockprotect_at25df_sec(struct flashchip *flash); -int spi_disable_blockprotect_at25f(struct flashchip *flash); -int spi_disable_blockprotect_at25fs010(struct flashchip *flash); -int spi_disable_blockprotect_at25fs040(struct flashchip *flash); +int spi_prettyprint_status_register_at25df(struct flashctx *flash); +int spi_prettyprint_status_register_at25df_sec(struct flashctx *flash); +int spi_prettyprint_status_register_at25f(struct flashctx *flash); +int spi_prettyprint_status_register_at25fs010(struct flashctx *flash); +int spi_prettyprint_status_register_at25fs040(struct flashctx *flash); +int spi_prettyprint_status_register_atmel_at26df081a(struct flashctx *flash); +int spi_disable_blockprotect_at25df(struct flashctx *flash); +int spi_disable_blockprotect_at25df_sec(struct flashctx *flash); +int spi_disable_blockprotect_at25f(struct flashctx *flash); +int spi_disable_blockprotect_at25fs010(struct flashctx *flash); +int spi_disable_blockprotect_at25fs040(struct flashctx *flash); /* 82802ab.c */ -uint8_t wait_82802ab(struct flashchip *flash); -int probe_82802ab(struct flashchip *flash); -int erase_block_82802ab(struct flashchip *flash, unsigned int page, unsigned int pagesize); -int write_82802ab(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +uint8_t wait_82802ab(struct flashctx *flash); +int probe_82802ab(struct flashctx *flash); +int erase_block_82802ab(struct flashctx *flash, unsigned int page, unsigned int pagesize); +int write_82802ab(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); void print_status_82802ab(uint8_t status); -int unlock_82802ab(struct flashchip *flash); -int unlock_28f004s5(struct flashchip *flash); -int unlock_lh28f008bjt(struct flashchip *flash); +int unlock_82802ab(struct flashctx *flash); +int unlock_28f004s5(struct flashctx *flash); +int unlock_lh28f008bjt(struct flashctx *flash); /* jedec.c */ uint8_t oddparity(uint8_t val); @@ -99,58 +99,58 @@ void data_polling_jedec(chipaddr dst, uint8_t data); int write_byte_program_jedec(chipaddr bios, uint8_t *src, chipaddr dst); -int probe_jedec(struct flashchip *flash); -int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int write_jedec_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int pagesize); -int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); -int erase_chip_block_jedec(struct flashchip *flash, unsigned int page, unsigned int blocksize); +int probe_jedec(struct flashctx *flash); +int write_jedec(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int write_jedec_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int erase_sector_jedec(struct flashctx *flash, unsigned int page, unsigned int pagesize); +int erase_block_jedec(struct flashctx *flash, unsigned int page, unsigned int blocksize); +int erase_chip_block_jedec(struct flashctx *flash, unsigned int page, unsigned int blocksize); /* m29f400bt.c */ -int probe_m29f400bt(struct flashchip *flash); -int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); -int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len); -int write_m29f400bt(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int probe_m29f400bt(struct flashctx *flash); +int block_erase_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len); +int block_erase_chip_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len); +int write_m29f400bt(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); void protect_m29f400bt(chipaddr bios); /* pm49fl00x.c */ -int unlock_49fl00x(struct flashchip *flash); -int lock_49fl00x(struct flashchip *flash); +int unlock_49fl00x(struct flashctx *flash); +int lock_49fl00x(struct flashctx *flash); /* sst28sf040.c */ -int erase_chip_28sf040(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int erase_sector_28sf040(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int write_28sf040(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int unprotect_28sf040(struct flashchip *flash); -int protect_28sf040(struct flashchip *flash); +int erase_chip_28sf040(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int erase_sector_28sf040(struct flashctx *flash, unsigned int address, unsigned int sector_size); +int write_28sf040(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int unprotect_28sf040(struct flashctx *flash); +int protect_28sf040(struct flashctx *flash); /* sst49lfxxxc.c */ -int erase_sector_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int unlock_49lfxxxc(struct flashchip *flash); +int erase_sector_49lfxxxc(struct flashctx *flash, unsigned int address, unsigned int sector_size); +int unlock_49lfxxxc(struct flashctx *flash); /* sst_fwhub.c */ -int printlock_sst_fwhub(struct flashchip *flash); -int unlock_sst_fwhub(struct flashchip *flash); +int printlock_sst_fwhub(struct flashctx *flash); +int unlock_sst_fwhub(struct flashctx *flash); /* w39.c */ -int printlock_w39l040(struct flashchip * flash); -int printlock_w39v040a(struct flashchip *flash); -int printlock_w39v040b(struct flashchip *flash); -int printlock_w39v040c(struct flashchip *flash); -int printlock_w39v040fa(struct flashchip *flash); -int printlock_w39v040fb(struct flashchip *flash); -int printlock_w39v040fc(struct flashchip *flash); -int printlock_w39v080a(struct flashchip *flash); -int printlock_w39v080fa(struct flashchip *flash); -int printlock_w39v080fa_dual(struct flashchip *flash); -int unlock_w39v040fb(struct flashchip *flash); -int unlock_w39v080fa(struct flashchip *flash); +int printlock_w39l040(struct flashctx * flash); +int printlock_w39v040a(struct flashctx *flash); +int printlock_w39v040b(struct flashctx *flash); +int printlock_w39v040c(struct flashctx *flash); +int printlock_w39v040fa(struct flashctx *flash); +int printlock_w39v040fb(struct flashctx *flash); +int printlock_w39v040fc(struct flashctx *flash); +int printlock_w39v080a(struct flashctx *flash); +int printlock_w39v080fa(struct flashctx *flash); +int printlock_w39v080fa_dual(struct flashctx *flash); +int unlock_w39v040fb(struct flashctx *flash); +int unlock_w39v080fa(struct flashctx *flash); /* w29ee011.c */ -int probe_w29ee011(struct flashchip *flash); +int probe_w29ee011(struct flashctx *flash); /* stm50flw0x0x.c */ -int erase_sector_stm50flw0x0x(struct flashchip *flash, unsigned int block, unsigned int blocksize); -int unlock_stm50flw0x0x(struct flashchip *flash); +int erase_sector_stm50flw0x0x(struct flashctx *flash, unsigned int block, unsigned int blocksize); +int unlock_stm50flw0x0x(struct flashctx *flash); #endif /* !__CHIPDRIVERS_H__ */ Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/cli_classic.c Wed Dec 14 23:25:15 2011 (r1473) @@ -169,8 +169,8 @@ unsigned long size; /* Probe for up to three flash chips. */ const struct flashchip *flash; - struct flashchip flashes[3]; - struct flashchip *fill_flash; + struct flashctx flashes[3]; + struct flashctx *fill_flash; const char *name; int namelen, opt, i; int startchip = 0, chipcount = 0, option_index = 0, force = 0; @@ -409,6 +409,7 @@ } #endif + /* Does a chip with the requested name exist in the flashchips array? */ if (chip_to_probe) { for (flash = flashchips; flash && flash->name; flash++) if (!strcmp(flash->name, chip_to_probe)) Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/dediprog.c Wed Dec 14 23:25:15 2011 (r1473) @@ -205,7 +205,7 @@ * @len length * @return 0 on success, 1 on failure */ -static int dediprog_spi_bulk_read(struct flashchip *flash, uint8_t *buf, +static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; @@ -253,7 +253,7 @@ return 0; } -static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, +static int dediprog_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; @@ -299,7 +299,7 @@ return 0; } -static int dediprog_spi_write_256(struct flashchip *flash, uint8_t *buf, +static int dediprog_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { int ret; Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/dummyflasher.c Wed Dec 14 23:25:15 2011 (r1473) @@ -62,7 +62,7 @@ static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, +static int dummy_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_dummyflasher = { @@ -548,7 +548,7 @@ return 0; } -static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, +static int dummy_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { return spi_write_chunked(flash, buf, start, len, Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/flash.h Wed Dec 14 23:25:15 2011 (r1473) @@ -93,6 +93,8 @@ #define FEATURE_WRSR_WREN (1 << 7) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) +struct flashctx; + struct flashchip { const char *vendor; const char *name; @@ -119,7 +121,7 @@ */ uint32_t tested; - int (*probe) (struct flashchip *flash); + int (*probe) (struct flashctx *flash); /* Delay after "enter/exit ID mode" commands in microseconds. * NB: negative values have special meanings, see TIMING_* below. @@ -140,20 +142,42 @@ } eraseblocks[NUM_ERASEREGIONS]; /* a block_erase function should try to erase one block of size * 'blocklen' at address 'blockaddr' and return 0 on success. */ - int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); + int (*block_erase) (struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen); } block_erasers[NUM_ERASEFUNCTIONS]; - int (*printlock) (struct flashchip *flash); - int (*unlock) (struct flashchip *flash); - int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); - int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); - struct { + int (*printlock) (struct flashctx *flash); + int (*unlock) (struct flashctx *flash); + int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + struct voltage { uint16_t min; uint16_t max; } voltage; +}; - /* Some flash devices have an additional register space. */ +/* struct flashctx must always contain struct flashchip at the beginning. */ +struct flashctx { + const char *vendor; + const char *name; + enum chipbustype bustype; + uint32_t manufacture_id; + uint32_t model_id; + int total_size; + int page_size; + int feature_bits; + uint32_t tested; + int (*probe) (struct flashctx *flash); + int probe_timing; + struct block_eraser block_erasers[NUM_ERASEFUNCTIONS]; + int (*printlock) (struct flashctx *flash); + int (*unlock) (struct flashctx *flash); + int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + struct voltage voltage; + /* struct flashchip ends here. */ + chipaddr virtual_memory; + /* Some flash devices have an additional register space. */ chipaddr virtual_registers; }; @@ -203,23 +227,23 @@ extern int verbose; extern const char flashrom_version[]; extern char *chip_to_probe; -void map_flash_registers(struct flashchip *flash); -int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int erase_flash(struct flashchip *flash); -int probe_flash(int startchip, struct flashchip *fill_flash, int force); -int read_flash_to_file(struct flashchip *flash, const char *filename); +void map_flash_registers(struct flashctx *flash); +int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int erase_flash(struct flashctx *flash); +int probe_flash(int startchip, struct flashctx *fill_flash, int force); +int read_flash_to_file(struct flashctx *flash, const char *filename); int min(int a, int b); int max(int a, int b); void tolower_string(char *str); char *extract_param(char **haystack, const char *needle, const char *delim); -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message); +int verify_range(struct flashctx *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message); int need_erase(uint8_t *have, uint8_t *want, unsigned int len, enum write_granularity gran); char *strcat_realloc(char *dest, const char *src); void print_version(void); void print_banner(void); void list_programmers_linebreak(int startcol, int cols, int paren); int selfcheck(void); -int doit(struct flashchip *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it); +int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it); int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename); int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename); @@ -259,7 +283,7 @@ /* layout.c */ int read_romlayout(char *name); int find_romentry(char *name); -int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents); +int handle_romentries(struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents); /* spi.c */ struct spi_command { Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/flashrom.c Wed Dec 14 23:25:15 2011 (r1473) @@ -268,7 +268,7 @@ */ static int may_register_shutdown = 0; -static int check_block_eraser(const struct flashchip *flash, int k, int log); +static int check_block_eraser(const struct flashctx *flash, int k, int log); /* Register a function to be executed on programmer shutdown. * The advantage over atexit() is that you can supply a void pointer which will @@ -404,7 +404,7 @@ programmer_table[programmer].delay(usecs); } -void map_flash_registers(struct flashchip *flash) +void map_flash_registers(struct flashctx *flash) { size_t size = flash->total_size * 1024; /* Flash registers live 4 MByte below the flash. */ @@ -412,7 +412,7 @@ flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); } -int read_memmapped(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) +int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len) { chip_readn(buf, flash->virtual_memory + start, len); @@ -523,7 +523,7 @@ } /* Returns the number of well-defined erasers for a chip. */ -static unsigned int count_usable_erasers(const struct flashchip *flash) +static unsigned int count_usable_erasers(const struct flashctx *flash) { unsigned int usable_erasefunctions = 0; int k; @@ -535,7 +535,7 @@ } /* start is an offset to the base address of the flash chip */ -int check_erased_range(struct flashchip *flash, unsigned int start, unsigned int len) +int check_erased_range(struct flashctx *flash, unsigned int start, unsigned int len) { int ret; uint8_t *cmpbuf = malloc(len); @@ -558,7 +558,7 @@ * @message string to print in the "FAILED" message * @return 0 for success, -1 for failure */ -int verify_range(struct flashchip *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, +int verify_range(struct flashctx *flash, uint8_t *cmpbuf, unsigned int start, unsigned int len, const char *message) { unsigned int i; @@ -938,7 +938,7 @@ return 1; } -int probe_flash(int startchip, struct flashchip *fill_flash, int force) +int probe_flash(int startchip, struct flashctx *fill_flash, int force) { const struct flashchip *flash; unsigned long base = 0; @@ -976,7 +976,7 @@ check_max_decode(buses_common, size); /* Start filling in the dynamic data. */ - *fill_flash = *flash; + memcpy(fill_flash, flash, sizeof(struct flashchip)); base = flashbase ? flashbase : (0xffffffff - size + 1); fill_flash->virtual_memory = (chipaddr)programmer_map_flash_region("flash chip", base, size); @@ -1029,7 +1029,7 @@ return flash - flashchips; } -int verify_flash(struct flashchip *flash, uint8_t *buf) +int verify_flash(struct flashctx *flash, uint8_t *buf) { int ret; unsigned int total_size = flash->total_size * 1024; @@ -1103,7 +1103,7 @@ return 0; } -int read_flash_to_file(struct flashchip *flash, const char *filename) +int read_flash_to_file(struct flashctx *flash, const char *filename) { unsigned long size = flash->total_size * 1024; unsigned char *buf = calloc(size, sizeof(char)); @@ -1202,11 +1202,11 @@ return ret; } -static int erase_and_write_block_helper(struct flashchip *flash, +static int erase_and_write_block_helper(struct flashctx *flash, unsigned int start, unsigned int len, uint8_t *curcontents, uint8_t *newcontents, - int (*erasefn) (struct flashchip *flash, + int (*erasefn) (struct flashctx *flash, unsigned int addr, unsigned int len)) { @@ -1253,14 +1253,14 @@ return ret; } -static int walk_eraseregions(struct flashchip *flash, int erasefunction, - int (*do_something) (struct flashchip *flash, +static int walk_eraseregions(struct flashctx *flash, int erasefunction, + int (*do_something) (struct flashctx *flash, unsigned int addr, unsigned int len, uint8_t *param1, uint8_t *param2, int (*erasefn) ( - struct flashchip *flash, + struct flashctx *flash, unsigned int addr, unsigned int len)), void *param1, void *param2) @@ -1292,7 +1292,7 @@ return 0; } -static int check_block_eraser(const struct flashchip *flash, int k, int log) +static int check_block_eraser(const struct flashctx *flash, int k, int log) { struct block_eraser eraser = flash->block_erasers[k]; @@ -1316,7 +1316,7 @@ return 0; } -int erase_and_write_flash(struct flashchip *flash, uint8_t *oldcontents, +int erase_and_write_flash(struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents) { int k, ret = 1; @@ -1534,6 +1534,13 @@ msg_gerr("Flashchips table miscompilation!\n"); ret = 1; } + /* Check that virtual_memory in struct flashctx is placed directly + * after the members copied from struct flashchip. + */ + if (sizeof(struct flashchip) != offsetof(struct flashctx, virtual_memory)) { + msg_gerr("struct flashctx broken!\n"); + ret = 1; + } for (flash = flashchips; flash && flash->name; flash++) if (selfcheck_eraseblocks(flash)) ret = 1; @@ -1559,7 +1566,7 @@ return ret; } -void check_chip_supported(const struct flashchip *flash) +void check_chip_supported(const struct flashctx *flash) { if (TEST_OK_MASK != (flash->tested & TEST_OK_MASK)) { msg_cinfo("===\n"); @@ -1611,7 +1618,7 @@ /* FIXME: This function signature needs to be improved once doit() has a better * function signature. */ -int chip_safety_check(struct flashchip *flash, int force, int read_it, int write_it, int erase_it, int verify_it) +int chip_safety_check(struct flashctx *flash, int force, int read_it, int write_it, int erase_it, int verify_it) { if (!programmer_may_write && (write_it || erase_it)) { msg_perr("Write/erase is not working yet on your programmer in " @@ -1672,7 +1679,7 @@ * but right now it allows us to split off the CLI code. * Besides that, the function itself is a textbook example of abysmal code flow. */ -int doit(struct flashchip *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it) +int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it) { uint8_t *oldcontents; uint8_t *newcontents; Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/ichspi.c Wed Dec 14 23:25:15 2011 (r1473) @@ -1175,7 +1175,7 @@ return 0; } -int ich_hwseq_probe(struct flashchip *flash) +int ich_hwseq_probe(struct flashctx *flash) { uint32_t total_size, boundary; uint32_t erase_size_low, size_low, erase_size_high, size_high; @@ -1228,7 +1228,7 @@ return 1; } -int ich_hwseq_block_erase(struct flashchip *flash, +int ich_hwseq_block_erase(struct flashctx *flash, unsigned int addr, unsigned int len) { @@ -1278,7 +1278,7 @@ return 0; } -int ich_hwseq_read(struct flashchip *flash, uint8_t *buf, unsigned int addr, +int ich_hwseq_read(struct flashctx *flash, uint8_t *buf, unsigned int addr, unsigned int len) { uint16_t hsfc; @@ -1316,7 +1316,7 @@ return 0; } -int ich_hwseq_write(struct flashchip *flash, uint8_t *buf, unsigned int addr, +int ich_hwseq_write(struct flashctx *flash, uint8_t *buf, unsigned int addr, unsigned int len) { uint16_t hsfc; Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/it87spi.c Wed Dec 14 23:25:15 2011 (r1473) @@ -105,9 +105,9 @@ static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, +static int it8716f_spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); -static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, +static int it8716f_spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_it87xx = { @@ -312,7 +312,7 @@ } /* Page size is usually 256 bytes */ -static int it8716f_spi_page_program(struct flashchip *flash, uint8_t *buf, +static int it8716f_spi_page_program(struct flashctx *flash, uint8_t *buf, unsigned int start) { unsigned int i; @@ -340,7 +340,7 @@ * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles * Need to read this big flash using firmware cycles 3 byte at a time. */ -static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, +static int it8716f_spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { fast_spi = 0; @@ -358,7 +358,7 @@ return 0; } -static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, +static int it8716f_spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { /* Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/jedec.c Wed Dec 14 23:25:15 2011 (r1473) @@ -91,7 +91,7 @@ msg_cdbg("%s: excessive loops, i=0x%x\n", __func__, i); } -static unsigned int getaddrmask(struct flashchip *flash) +static unsigned int getaddrmask(struct flashctx *flash) { switch (flash->feature_bits & FEATURE_ADDR_MASK) { case FEATURE_ADDR_FULL: @@ -110,7 +110,7 @@ } } -static void start_program_jedec_common(struct flashchip *flash, unsigned int mask) +static void start_program_jedec_common(struct flashctx *flash, unsigned int mask) { chipaddr bios = flash->virtual_memory; chip_writeb(0xAA, bios + (0x5555 & mask)); @@ -118,7 +118,7 @@ chip_writeb(0xA0, bios + (0x5555 & mask)); } -static int probe_jedec_common(struct flashchip *flash, unsigned int mask) +static int probe_jedec_common(struct flashctx *flash, unsigned int mask) { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; @@ -237,7 +237,7 @@ return 1; } -static int erase_sector_jedec_common(struct flashchip *flash, unsigned int page, +static int erase_sector_jedec_common(struct flashctx *flash, unsigned int page, unsigned int pagesize, unsigned int mask) { chipaddr bios = flash->virtual_memory; @@ -267,7 +267,7 @@ return 0; } -static int erase_block_jedec_common(struct flashchip *flash, unsigned int block, +static int erase_block_jedec_common(struct flashctx *flash, unsigned int block, unsigned int blocksize, unsigned int mask) { chipaddr bios = flash->virtual_memory; @@ -297,7 +297,7 @@ return 0; } -static int erase_chip_jedec_common(struct flashchip *flash, unsigned int mask) +static int erase_chip_jedec_common(struct flashctx *flash, unsigned int mask) { chipaddr bios = flash->virtual_memory; int delay_us = 0; @@ -325,7 +325,7 @@ return 0; } -static int write_byte_program_jedec_common(struct flashchip *flash, uint8_t *src, +static int write_byte_program_jedec_common(struct flashctx *flash, uint8_t *src, chipaddr dst, unsigned int mask) { int tried = 0, failed = 0; @@ -355,7 +355,7 @@ } /* chunksize is 1 */ -int write_jedec_1(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_jedec_1(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) { int i, failed = 0; chipaddr dst = flash->virtual_memory + start; @@ -376,7 +376,7 @@ return failed; } -int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int page_size) +int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int page_size) { int i, tried = 0, failed; uint8_t *s = src; @@ -424,11 +424,11 @@ * This function is a slightly modified copy of spi_write_chunked. * Each page is written separately in chunks with a maximum size of chunksize. */ -int write_jedec(struct flashchip *flash, uint8_t *buf, unsigned int start, int unsigned len) +int write_jedec(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len) { unsigned int i, starthere, lenhere; /* FIXME: page_size is the wrong variable. We need max_writechunk_size - * in struct flashchip to do this properly. All chips using + * in struct flashctx to do this properly. All chips using * write_jedec have page_size set to max_writechunk_size, so * we're OK for now. */ @@ -458,7 +458,7 @@ } /* erase chip with block_erase() prototype */ -int erase_chip_block_jedec(struct flashchip *flash, unsigned int addr, +int erase_chip_block_jedec(struct flashctx *flash, unsigned int addr, unsigned int blocksize) { unsigned int mask; @@ -472,7 +472,7 @@ return erase_chip_jedec_common(flash, mask); } -int probe_jedec(struct flashchip *flash) +int probe_jedec(struct flashctx *flash) { unsigned int mask; @@ -480,7 +480,7 @@ return probe_jedec_common(flash, mask); } -int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int size) +int erase_sector_jedec(struct flashctx *flash, unsigned int page, unsigned int size) { unsigned int mask; @@ -488,7 +488,7 @@ return erase_sector_jedec_common(flash, page, size, mask); } -int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int size) +int erase_block_jedec(struct flashctx *flash, unsigned int page, unsigned int size) { unsigned int mask; @@ -496,7 +496,7 @@ return erase_block_jedec_common(flash, page, size, mask); } -int erase_chip_jedec(struct flashchip *flash) +int erase_chip_jedec(struct flashctx *flash) { unsigned int mask; Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/layout.c Wed Dec 14 23:25:15 2011 (r1473) @@ -240,7 +240,7 @@ return best_entry; } -int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents) +int handle_romentries(struct flashctx *flash, uint8_t *oldcontents, uint8_t *newcontents) { unsigned int start = 0; int entry; Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/linux_spi.c Wed Dec 14 23:25:15 2011 (r1473) @@ -36,9 +36,9 @@ static int linux_spi_shutdown(void *data); static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *txbuf, unsigned char *rxbuf); -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, +static int linux_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); -static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, +static int linux_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_linux = { @@ -131,13 +131,13 @@ return 0; } -static int linux_spi_read(struct flashchip *flash, uint8_t *buf, +static int linux_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { return spi_read_chunked(flash, buf, start, len, (unsigned)getpagesize()); } -static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, +static int linux_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { return spi_write_chunked(flash, buf, start, len, ((unsigned)getpagesize()) - 4); Modified: trunk/m29f400bt.c ============================================================================== --- trunk/m29f400bt.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/m29f400bt.c Wed Dec 14 23:25:15 2011 (r1473) @@ -28,7 +28,7 @@ functions. */ /* chunksize is 1 */ -int write_m29f400bt(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_m29f400bt(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; @@ -55,7 +55,7 @@ return 0; } -int probe_m29f400bt(struct flashchip *flash) +int probe_m29f400bt(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; @@ -86,7 +86,7 @@ return 0; } -int erase_m29f400bt(struct flashchip *flash) +int erase_m29f400bt(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; @@ -105,7 +105,7 @@ return 0; } -int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len) +int block_erase_m29f400bt(struct flashctx *flash, unsigned int start, unsigned int len) { chipaddr bios = flash->virtual_memory; chipaddr dst = bios + start; @@ -125,7 +125,7 @@ return 0; } -int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int address, unsigned int blocklen) +int block_erase_chip_m29f400bt(struct flashctx *flash, unsigned int address, unsigned int blocklen) { if ((address != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", Modified: trunk/opaque.c ============================================================================== --- trunk/opaque.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/opaque.c Wed Dec 14 23:25:15 2011 (r1473) @@ -41,7 +41,7 @@ const struct opaque_programmer *opaque_programmer = &opaque_programmer_none; -int probe_opaque(struct flashchip *flash) +int probe_opaque(struct flashctx *flash) { if (!opaque_programmer->probe) { msg_perr("%s called before register_opaque_programmer. " @@ -53,7 +53,7 @@ return opaque_programmer->probe(flash); } -int read_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->read) { msg_perr("%s called before register_opaque_programmer. " @@ -64,7 +64,7 @@ return opaque_programmer->read(flash, buf, start, len); } -int write_opaque(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int write_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!opaque_programmer->write) { msg_perr("%s called before register_opaque_programmer. " @@ -75,7 +75,7 @@ return opaque_programmer->write(flash, buf, start, len); } -int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen) +int erase_opaque(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen) { if (!opaque_programmer->erase) { msg_perr("%s called before register_opaque_programmer. " Modified: trunk/pm49fl00x.c ============================================================================== --- trunk/pm49fl00x.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/pm49fl00x.c Wed Dec 14 23:25:15 2011 (r1473) @@ -36,13 +36,13 @@ } } -int unlock_49fl00x(struct flashchip *flash) +int unlock_49fl00x(struct flashctx *flash) { write_lockbits_49fl00x(flash->virtual_registers, flash->total_size * 1024, 0, flash->page_size); return 0; } -int lock_49fl00x(struct flashchip *flash) +int lock_49fl00x(struct flashctx *flash) { write_lockbits_49fl00x(flash->virtual_registers, flash->total_size * 1024, 1, flash->page_size); return 0; Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/programmer.h Wed Dec 14 23:25:15 2011 (r1473) @@ -24,7 +24,7 @@ #ifndef __PROGRAMMER_H__ #define __PROGRAMMER_H__ 1 -#include "flash.h" /* for chipaddr and flashchip */ +#include "flash.h" /* for chipaddr and flashctx */ enum programmer { #if CONFIG_INTERNAL == 1 @@ -513,7 +513,7 @@ extern struct decode_sizes max_rom_decode; extern int programmer_may_write; extern unsigned long flashbase; -void check_chip_supported(const struct flashchip *flash); +void check_chip_supported(const struct flashctx *flash); int check_max_decode(enum chipbustype buses, uint32_t size); char *extract_programmer_param(const char *param_name); @@ -570,16 +570,16 @@ int (*multicommand)(struct spi_command *cmds); /* Optimized functions for this programmer */ - int (*read)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); - int (*write_256)(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*read)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write_256)(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); }; extern const struct spi_programmer *spi_programmer; int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int default_spi_send_multicommand(struct spi_command *cmds); -int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); void register_spi_programmer(const struct spi_programmer *programmer); /* ichspi.c */ @@ -624,10 +624,10 @@ int max_data_read; int max_data_write; /* Specific functions for this programmer */ - int (*probe) (struct flashchip *flash); - int (*read) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); - int (*write) (struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); - int (*erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); + int (*probe) (struct flashctx *flash); + int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int (*erase) (struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen); }; extern const struct opaque_programmer *opaque_programmer; void register_opaque_programmer(const struct opaque_programmer *pgm); Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/serprog.c Wed Dec 14 23:25:15 2011 (r1473) @@ -302,7 +302,7 @@ static int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, +static int serprog_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static struct spi_programmer spi_programmer_serprog = { .type = SPI_CONTROLLER_SERPROG, @@ -822,7 +822,7 @@ * the advantage that it is much faster for most chips, but breaks those with * non-contiguous address space (like AT45DB161D). When spi_read_chunked is * fixed this method can be removed. */ -static int serprog_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +static int serprog_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int i, cur_len; const unsigned int max_read = spi_programmer_serprog.max_data_read; Modified: trunk/sharplhf00l04.c ============================================================================== --- trunk/sharplhf00l04.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/sharplhf00l04.c Wed Dec 14 23:25:15 2011 (r1473) @@ -26,7 +26,7 @@ * FIXME: This file is unused. */ -int erase_lhf00l04_block(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen) +int erase_lhf00l04_block(struct flashctx *flash, unsigned int blockaddr, unsigned int blocklen) { chipaddr bios = flash->virtual_memory + blockaddr; chipaddr wrprotect = flash->virtual_registers + blockaddr + 2; Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/spi.c Wed Dec 14 23:25:15 2011 (r1473) @@ -97,7 +97,7 @@ return result; } -int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int max_data = spi_programmer->max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { @@ -109,7 +109,7 @@ return spi_read_chunked(flash, buf, start, len, max_data); } -int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int max_data = spi_programmer->max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { @@ -121,7 +121,7 @@ return spi_write_chunked(flash, buf, start, len, max_data); } -int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int addrbase = 0; if (!spi_programmer->read) { @@ -160,7 +160,7 @@ * .write_256 = spi_chip_write_1 */ /* real chunksize is up to 256, logical chunksize is 256 */ -int spi_chip_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { if (!spi_programmer->write_256) { msg_perr("%s called, but SPI page write is unsupported on this " Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/spi25.c Wed Dec 14 23:25:15 2011 (r1473) @@ -113,7 +113,7 @@ return spi_send_command(sizeof(cmd), 0, cmd, NULL); } -static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) +static int probe_spi_rdid_generic(struct flashctx *flash, int bytes) { unsigned char readarr[4]; uint32_t id1; @@ -167,12 +167,12 @@ return 0; } -int probe_spi_rdid(struct flashchip *flash) +int probe_spi_rdid(struct flashctx *flash) { return probe_spi_rdid_generic(flash, 3); } -int probe_spi_rdid4(struct flashchip *flash) +int probe_spi_rdid4(struct flashctx *flash) { /* Some SPI controllers do not support commands with writecnt=1 and * readcnt=4. @@ -194,7 +194,7 @@ return 0; } -int probe_spi_rems(struct flashchip *flash) +int probe_spi_rems(struct flashctx *flash) { unsigned char readarr[JEDEC_REMS_INSIZE]; uint32_t id1, id2; @@ -230,7 +230,7 @@ return 0; } -int probe_spi_res1(struct flashchip *flash) +int probe_spi_res1(struct flashctx *flash) { static const unsigned char allff[] = {0xff, 0xff, 0xff}; static const unsigned char all00[] = {0x00, 0x00, 0x00}; @@ -274,7 +274,7 @@ return 1; } -int probe_spi_res2(struct flashchip *flash) +int probe_spi_res2(struct flashctx *flash) { unsigned char readarr[2]; uint32_t id1, id2; @@ -410,7 +410,7 @@ bpt[(status & 0x1c) >> 2]); } -int spi_prettyprint_status_register(struct flashchip *flash) +int spi_prettyprint_status_register(struct flashctx *flash) { uint8_t status; @@ -444,7 +444,7 @@ return 0; } -int spi_chip_erase_60(struct flashchip *flash) +int spi_chip_erase_60(struct flashctx *flash) { int result; struct spi_command cmds[] = { @@ -481,7 +481,7 @@ return 0; } -int spi_chip_erase_c7(struct flashchip *flash) +int spi_chip_erase_c7(struct flashctx *flash) { int result; struct spi_command cmds[] = { @@ -517,7 +517,7 @@ return 0; } -int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_52(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -563,7 +563,7 @@ * 32k for SST * 4-32k non-uniform for EON */ -int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -607,7 +607,7 @@ /* Block size is usually * 4k for PMC */ -int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -649,7 +649,7 @@ } /* Sector size is usually 4k, though Macronix eliteflash has 64k */ -int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { int result; struct spi_command cmds[] = { @@ -690,7 +690,7 @@ return 0; } -int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", @@ -700,7 +700,7 @@ return spi_chip_erase_60(flash); } -int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", @@ -728,7 +728,7 @@ * This is according the SST25VF016 datasheet, who knows it is more * generic that this... */ -static int spi_write_status_register_ewsr(struct flashchip *flash, int status) +static int spi_write_status_register_ewsr(struct flashctx *flash, int status) { int result; int i = 0; @@ -776,7 +776,7 @@ return 0; } -static int spi_write_status_register_wren(struct flashchip *flash, int status) +static int spi_write_status_register_wren(struct flashctx *flash, int status) { int result; int i = 0; @@ -824,7 +824,7 @@ return 0; } -int spi_write_status_register(struct flashchip *flash, int status) +int spi_write_status_register(struct flashctx *flash, int status) { int ret = 1; @@ -926,7 +926,7 @@ * Write 0x00 to the status register. Check if any locks are still set (that * part is chip specific). Repeat once. */ -int spi_disable_blockprotect(struct flashchip *flash) +int spi_disable_blockprotect(struct flashctx *flash) { uint8_t status; int result; @@ -968,7 +968,7 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is read separately in chunks with a maximum size of chunksize. */ -int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) +int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; unsigned int i, j, starthere, lenhere, toread; @@ -1007,12 +1007,12 @@ * FIXME: Use the chunk code from Michael Karcher instead. * Each page is written separately in chunks with a maximum size of chunksize. */ -int spi_write_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) +int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { int rc = 0; unsigned int i, j, starthere, lenhere, towrite; /* FIXME: page_size is the wrong variable. We need max_writechunk_size - * in struct flashchip to do this properly. All chips using + * in struct flashctx to do this properly. All chips using * spi_chip_write_256 have page_size set to max_writechunk_size, so * we're OK for now. */ @@ -1055,7 +1055,7 @@ * (e.g. due to size constraints in IT87* for over 512 kB) */ /* real chunksize is 1, logical chunksize is 1 */ -int spi_chip_write_1(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int i; int result = 0; @@ -1071,7 +1071,7 @@ return 0; } -int spi_aai_write(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { uint32_t pos = start; int result; Modified: trunk/sst28sf040.c ============================================================================== --- trunk/sst28sf040.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/sst28sf040.c Wed Dec 14 23:25:15 2011 (r1473) @@ -30,7 +30,7 @@ #define RESET 0xFF #define READ_ID 0x90 -int protect_28sf040(struct flashchip *flash) +int protect_28sf040(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; @@ -45,7 +45,7 @@ return 0; } -int unprotect_28sf040(struct flashchip *flash) +int unprotect_28sf040(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; @@ -60,7 +60,7 @@ return 0; } -int erase_sector_28sf040(struct flashchip *flash, unsigned int address, unsigned int sector_size) +int erase_sector_28sf040(struct flashctx *flash, unsigned int address, unsigned int sector_size) { chipaddr bios = flash->virtual_memory; @@ -76,7 +76,7 @@ } /* chunksize is 1 */ -int write_28sf040(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) +int write_28sf040(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int len) { int i; chipaddr bios = flash->virtual_memory; @@ -100,7 +100,7 @@ return 0; } -static int erase_28sf040(struct flashchip *flash) +static int erase_28sf040(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; @@ -114,7 +114,7 @@ return 0; } -int erase_chip_28sf040(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +int erase_chip_28sf040(struct flashctx *flash, unsigned int addr, unsigned int blocklen) { if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/sst49lfxxxc.c Wed Dec 14 23:25:15 2011 (r1473) @@ -23,7 +23,7 @@ #include "flash.h" #include "chipdrivers.h" -static int write_lockbits_block_49lfxxxc(struct flashchip *flash, unsigned long address, unsigned char bits) +static int write_lockbits_block_49lfxxxc(struct flashctx *flash, unsigned long address, unsigned char bits) { unsigned long lock = flash->virtual_registers + address + 2; msg_cdbg("lockbits at address=0x%08lx is 0x%01x\n", lock, chip_readb(lock)); @@ -32,7 +32,7 @@ return 0; } -static int write_lockbits_49lfxxxc(struct flashchip *flash, unsigned char bits) +static int write_lockbits_49lfxxxc(struct flashctx *flash, unsigned char bits) { chipaddr registers = flash->virtual_registers; unsigned int i, left = flash->total_size * 1024; @@ -54,12 +54,12 @@ return 0; } -int unlock_49lfxxxc(struct flashchip *flash) +int unlock_49lfxxxc(struct flashctx *flash) { return write_lockbits_49lfxxxc(flash, 0); } -int erase_sector_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int sector_size) +int erase_sector_49lfxxxc(struct flashctx *flash, unsigned int address, unsigned int sector_size) { uint8_t status; chipaddr bios = flash->virtual_memory; Modified: trunk/sst_fwhub.c ============================================================================== --- trunk/sst_fwhub.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/sst_fwhub.c Wed Dec 14 23:25:15 2011 (r1473) @@ -24,7 +24,7 @@ #include "flash.h" -static int check_sst_fwhub_block_lock(struct flashchip *flash, int offset) +static int check_sst_fwhub_block_lock(struct flashctx *flash, int offset) { chipaddr registers = flash->virtual_registers; uint8_t blockstatus; @@ -50,7 +50,7 @@ return blockstatus & 0x1; } -static int clear_sst_fwhub_block_lock(struct flashchip *flash, int offset) +static int clear_sst_fwhub_block_lock(struct flashctx *flash, int offset) { chipaddr registers = flash->virtual_registers; uint8_t blockstatus; @@ -68,7 +68,7 @@ return blockstatus; } -int printlock_sst_fwhub(struct flashchip *flash) +int printlock_sst_fwhub(struct flashctx *flash) { int i; @@ -78,7 +78,7 @@ return 0; } -int unlock_sst_fwhub(struct flashchip *flash) +int unlock_sst_fwhub(struct flashctx *flash) { int i, ret=0; Modified: trunk/stm50flw0x0x.c ============================================================================== --- trunk/stm50flw0x0x.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/stm50flw0x0x.c Wed Dec 14 23:25:15 2011 (r1473) @@ -36,7 +36,7 @@ * The ST M50FLW080B and STM50FLW080B chips have to be unlocked, * before you can erase them or write to them. */ -static int unlock_block_stm50flw0x0x(struct flashchip *flash, int offset) +static int unlock_block_stm50flw0x0x(struct flashctx *flash, int offset) { chipaddr wrprotect = flash->virtual_registers + 2; static const uint8_t unlock_sector = 0x00; @@ -79,7 +79,7 @@ return 0; } -int unlock_stm50flw0x0x(struct flashchip *flash) +int unlock_stm50flw0x0x(struct flashctx *flash) { int i; @@ -94,7 +94,7 @@ } /* This function is unused. */ -int erase_sector_stm50flw0x0x(struct flashchip *flash, unsigned int sector, unsigned int sectorsize) +int erase_sector_stm50flw0x0x(struct flashctx *flash, unsigned int sector, unsigned int sectorsize) { chipaddr bios = flash->virtual_memory + sector; Modified: trunk/w29ee011.c ============================================================================== --- trunk/w29ee011.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/w29ee011.c Wed Dec 14 23:25:15 2011 (r1473) @@ -24,7 +24,7 @@ /* According to the Winbond W29EE011, W29EE012, W29C010M, W29C011A * datasheets this is the only valid probe function for those chips. */ -int probe_w29ee011(struct flashchip *flash) +int probe_w29ee011(struct flashctx *flash) { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; Modified: trunk/w39.c ============================================================================== --- trunk/w39.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/w39.c Wed Dec 14 23:25:15 2011 (r1473) @@ -21,7 +21,7 @@ #include "flash.h" -static int printlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) +static int printlock_w39_fwh_block(struct flashctx *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -59,7 +59,7 @@ return (locking & ((1 << 2) | (1 << 0))) ? -1 : 0; } -static int unlock_w39_fwh_block(struct flashchip *flash, unsigned int offset) +static int unlock_w39_fwh_block(struct flashctx *flash, unsigned int offset) { chipaddr wrprotect = flash->virtual_registers + offset + 2; uint8_t locking; @@ -80,7 +80,7 @@ return 0; } -static uint8_t w39_idmode_readb(struct flashchip *flash, unsigned int offset) +static uint8_t w39_idmode_readb(struct flashctx *flash, unsigned int offset) { chipaddr bios = flash->virtual_memory; uint8_t val; @@ -127,7 +127,7 @@ return 0; } -static int printlock_w39_common(struct flashchip *flash, unsigned int offset) +static int printlock_w39_common(struct flashctx *flash, unsigned int offset) { uint8_t lock; @@ -136,7 +136,7 @@ return printlock_w39_tblwp(lock); } -static int printlock_w39_fwh(struct flashchip *flash) +static int printlock_w39_fwh(struct flashctx *flash) { unsigned int i, total_size = flash->total_size * 1024; int ret = 0; @@ -148,7 +148,7 @@ return ret; } -static int unlock_w39_fwh(struct flashchip *flash) +static int unlock_w39_fwh(struct flashctx *flash) { unsigned int i, total_size = flash->total_size * 1024; @@ -160,7 +160,7 @@ return 0; } -int printlock_w39l040(struct flashchip * flash) +int printlock_w39l040(struct flashctx * flash) { uint8_t lock; int ret; @@ -176,7 +176,7 @@ return ret; } -int printlock_w39v040a(struct flashchip *flash) +int printlock_w39v040a(struct flashctx *flash) { uint8_t lock; int ret = 0; @@ -194,18 +194,18 @@ return ret; } -int printlock_w39v040b(struct flashchip *flash) +int printlock_w39v040b(struct flashctx *flash) { return printlock_w39_common(flash, 0x7fff2); } -int printlock_w39v040c(struct flashchip *flash) +int printlock_w39v040c(struct flashctx *flash) { /* Typo in the datasheet? The other chips use 0x7fff2. */ return printlock_w39_common(flash, 0xfff2); } -int printlock_w39v040fa(struct flashchip *flash) +int printlock_w39v040fa(struct flashctx *flash) { int ret = 0; @@ -215,7 +215,7 @@ return ret; } -int printlock_w39v040fb(struct flashchip *flash) +int printlock_w39v040fb(struct flashctx *flash) { int ret = 0; @@ -225,7 +225,7 @@ return ret; } -int printlock_w39v040fc(struct flashchip *flash) +int printlock_w39v040fc(struct flashctx *flash) { int ret = 0; @@ -236,12 +236,12 @@ return ret; } -int printlock_w39v080a(struct flashchip *flash) +int printlock_w39v080a(struct flashctx *flash) { return printlock_w39_common(flash, 0xffff2); } -int printlock_w39v080fa(struct flashchip *flash) +int printlock_w39v080fa(struct flashctx *flash) { int ret = 0; @@ -251,7 +251,7 @@ return ret; } -int printlock_w39v080fa_dual(struct flashchip *flash) +int printlock_w39v080fa_dual(struct flashctx *flash) { msg_cinfo("Block locking for W39V080FA in dual mode is " "undocumented.\n"); @@ -259,7 +259,7 @@ return -1; } -int unlock_w39v040fb(struct flashchip *flash) +int unlock_w39v040fb(struct flashctx *flash) { if (unlock_w39_fwh(flash)) return -1; @@ -269,7 +269,7 @@ return 0; } -int unlock_w39v080fa(struct flashchip *flash) +int unlock_w39v080fa(struct flashctx *flash) { if (unlock_w39_fwh(flash)) return -1; Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Thu Dec 8 08:49:11 2011 (r1472) +++ trunk/wbsio_spi.c Wed Dec 14 23:25:15 2011 (r1473) @@ -62,7 +62,7 @@ static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len); +static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); static const struct spi_programmer spi_programmer_wbsio = { .type = SPI_CONTROLLER_WBSIO, @@ -194,7 +194,7 @@ return 0; } -static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) +static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { return read_memmapped(flash, buf, start, len); }

1 0

ECS K7SEM (V1.0) - OK
by Marcos Felipe Rasia de Mello 14 Dec '11

14 Dec '11

ECS K7SEM (V1.0) success report. Board link: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&D… BIOS: http://download.ecsusa.com/dlfileecs/bios/mb/k7/k7sem/k7sem_12b.exe (K7SEM Ver:1.2b 01/27/2003) Marcos

1 0

Re: [flashrom] Update BIOS fail
by Grant Zhang 13 Dec '11

13 Dec '11

What does "/home/barry/flashrom-0.9.4/flashrom -R" show? 于 2011年12月11日 20:32, Barry Krauter 写道: > Hi Carl-Daniel > > I got the 9.1 version from Ubuntu Synaptic. > > > > I went to your website and downloaded flashrom-0.9.4.tar.bz2. I copied > file to /home/barry > > in Terminal I did |$ tar jxf /home/barry/flashrom-0.9.4.tar.bz2| > > This created /home/barry/flashrom-0.9.4 directory > > I then did > > cd /home/barry/flashrom-0.9.4 > > then > > |# ./configure > # make > # make install| > > These commands executed with no messages. > > When i do command flashrom -R I still see version 9.1. > > Any suggestions? > > Thanks > > Barry > > On Sun, Dec 11, 2011 at 8:54 PM, Carl-Daniel Hailfinger > <c-d.hailfinger.devel.2006(a)gmx.net > <mailto:c-d.hailfinger.devel.2006@gmx.net>> wrote: > > Hi Barry, > > it seems you're using a very old flashrom version. Could you please > retry with latest flashrom or at least version 0.9.4? That might > fix the > issue you're seeing. > > Am 12.12.2011 01:19 schrieb Barry Krauter: > > Attempting to replace currbios with 661VS155.BIN upgraded Bios > for Shuttle > > 661V31 motherboard using 3com NIC card. > > > > Can you tell me why this fails? > > > > barry@baerry-desktop:~$ sudo flashrom -p nic3com -w > /home/barry/661VS155.BIN > > flashrom v0.9.1-r946 > > Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX" > (10b7:9055, BDF 06:02.0). > > Calibrating delay loop... OK. > > Found chip "SST SST39SF020A" (256 KB, Parallel) at physical > address 0xfffc0000. > > That flash chip is marked as supported in latest flashrom. > > Regards, > Carl-Daniel > > -- > http://www.hailfinger.org/ > > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom

1 0

Supermicro H8QG6-F works
by Michael Fuckner 13 Dec '11

13 Dec '11

Good morning, reading Bios from Quad Opteron H8QG6-F seems to work. Regards, Michael!

2 1

Re: [flashrom] Update BIOS fail
by Carl-Daniel Hailfinger 12 Dec '11

12 Dec '11

Hi Barry, it seems you're using a very old flashrom version. Could you please retry with latest flashrom or at least version 0.9.4? That might fix the issue you're seeing. Am 12.12.2011 01:19 schrieb Barry Krauter: > Attempting to replace currbios with 661VS155.BIN upgraded Bios for Shuttle > 661V31 motherboard using 3com NIC card. > > Can you tell me why this fails? > > barry@baerry-desktop:~$ sudo flashrom -p nic3com -w /home/barry/661VS155.BIN > flashrom v0.9.1-r946 > Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX" (10b7:9055, BDF 06:02.0). > Calibrating delay loop... OK. > Found chip "SST SST39SF020A" (256 KB, Parallel) at physical address 0xfffc0000. That flash chip is marked as supported in latest flashrom. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Update BIOS fail
by Barry Krauter 12 Dec '11

12 Dec '11

Hi: Attempting to replace currbios with 661VS155.BIN upgraded Bios for Shuttle 661V31 motherboard using 3com NIC card. Can you tell me why this fails? Thanks Barry barry@baerry-desktop:~$ sudo flashrom -p nic3com -r currbios flashrom v0.9.1-r946 Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX" (10b7:9055, BDF 06:02.0). Calibrating delay loop... OK. Found chip "SST SST39SF020A" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. barry@baerry-desktop:~$ sudo flashrom -p nic3com -w /home/barry/661VS155.BIN flashrom v0.9.1-r946 Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX" (10b7:9055, BDF 06:02.0). Calibrating delay loop... OK. Found chip "SST SST39SF020A" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... SUCCESS. Programming page: address: 0x00020000 writing sector at 0x20000 failed! writing sector at 0x20400 failed! writing sector at 0x20800 failed! writing sector at 0x20c00 failed! address: 0x00021000 writing sector at 0x21000 failed! writing sector at 0x21400 failed! writing sector at 0x21800 failed! writing sector at 0x21c00 failed! address: 0x00022000 writing sector at 0x22000 failed! writing sector at 0x22400 failed! writing sector at 0x22800 failed! writing sector at 0x22c00 failed! address: 0x00023000 writing sector at 0x23000 failed! writing sector at 0x23400 failed! writing sector at 0x23800 failed! writing sector at 0x23c00 failed! address: 0x00024000 writing sector at 0x24000 failed! writing sector at 0x24400 failed! writing sector at 0x24800 failed! writing sector at 0x24c00 failed! address: 0x00025000 writing sector at 0x25000 failed! writing sector at 0x25400 failed! writing sector at 0x25800 failed! writing sector at 0x25c00 failed! address: 0x00026000 writing sector at 0x26000 failed! writing sector at 0x26400 failed! writing sector at 0x26800 failed! writing sector at 0x26c00 failed! address: 0x00027000 writing sector at 0x27000 failed! writing sector at 0x27400 failed! writing sector at 0x27800 failed! writing sector at 0x27c00 failed! address: 0x00028000 writing sector at 0x28000 failed! writing sector at 0x28400 failed! writing sector at 0x28800 failed! writing sector at 0x28c00 failed! address: 0x00029000 writing sector at 0x29000 failed! writing sector at 0x29400 failed! writing sector at 0x29800 failed! writing sector at 0x29c00 failed! address: 0x0002a000 writing sector at 0x2a000 failed! writing sector at 0x2a400 failed! writing sector at 0x2a800 failed! writing sector at 0x2ac00 failed! address: 0x0002b000 writing sector at 0x2b000 failed! writing sector at 0x2b400 failed! writing sector at 0x2b800 failed! writing sector at 0x2bc00 failed! address: 0x0002c000 writing sector at 0x2c000 failed! writing sector at 0x2c400 failed! writing sector at 0x2c800 failed! writing sector at 0x2cc00 failed! address: 0x0002d000 writing sector at 0x2d000 failed! writing sector at 0x2d400 failed! writing sector at 0x2d800 failed! writing sector at 0x2dc00 failed! address: 0x0002e000 writing sector at 0x2e000 failed! writing sector at 0x2e400 failed! writing sector at 0x2e800 failed! writing sector at 0x2ec00 failed! address: 0x0003f000 COMPLETE. Verifying flash... VERIFY FAILED at 0x00000001! Expected=0xce, Read=0xc6, failed byte count from 0x00000000-0x0003ffff: 0x25f27 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! barry@baerry-desktop:~$ sudo flashrom -p nic3com -w currbios flashrom v0.9.1-r946 Found "3COM 3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX" (10b7:9055, BDF 06:02.0). Calibrating delay loop... OK. Found chip "SST SST39SF020A" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... SUCCESS. Programming page: address: 0x0003f000 COMPLETE. Verifying flash... VERIFIED. barry@baerry-desktop:~$ A non-text attachment has been stripped: currbios It is available for download at http://paste.flashrom.org/view.php?id=962 A non-text attachment has been stripped: 661VS155.BIN It is available for download at http://paste.flashrom.org/view.php?id=963 An attachment has been inlined as plain text: Flashrom Attemped Update.odt

1 0

NVIDIA_MCP79 (SVN Build)
by Lee Daugherty 12 Dec '11

12 Dec '11

ldaugherty@Nettop-Zotac:~/svn/flashrom$ sudo flashrom -V flashrom v0.9.4-r1472 on Linux 3.0.0-0300rc2-generic (i686), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 524M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 984 us, 10000 myus = 10246 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ZOTAC" DMI string baseboard-product-name: "ION" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79" with PCI ID 10de:0aad. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0aa2 at 00:03:2 MCP SPI BAR is at 0xfae80000 Mapping NVIDIA MCP6x SPI at 0xfae80000, unaligned size 0x544. SPI control is 0xc052, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This programmer supports the following protocols: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Found Winbond flash chip "W25X80" (1024 kB, SPI). No operations were specified.

1 0

flashrom -V output for NVIDIA MCP79 (Zotac Mag Mini)
by Lee Daugherty 11 Dec '11

11 Dec '11

ldaugherty@Nettop-Zotac:~$ sudo flashrom -V > NVIDIA_MCP79.txt Mapping MCP67 SPI at 0xfae80000, unaligned size 0x544. ldaugherty@Nettop-Zotac:~$ cat NVIDIA_MCP79.txt flashrom v0.9.2-r1028 on Linux 3.0.0-0300rc2-generic (i686), built with libpci 3.0.0, GCC 4.4.4, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 2 usecs, 772M loops per second, 10 myus = 10 us, 100 myus = 193 us, 1000 myus = 1024 us, 10000 myus = 9893 us, 8 myus = 9 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ZOTAC" DMI string baseboard-product-name: "ION" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79", enabling flash write... chipset PCI ID is 10de:0aad, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:0aa2 at 00:03:2 SPI BAR is at 0xfae80000, after clearing low bits BAR is at 0xfae80000 SPI control is 0xc05a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.

1 0

Supermicro X8DTE-F
by Michael Fuckner 10 Dec '11

10 Dec '11

Hi all, I have a lot of supermicro boards/ systems at hand and I first tried it this morning and it worked with X8DTE-F, so it will most likely also work with X8DT6 (same bios file). Do you also need flashrom -V or -z? I hope I have some time to test other boards available. Regards, Michael! test131:/media/flashrom # ./flashrom -w ~/x8dt61.830 flashrom v0.9.4-r1470 on Linux 3.1.0-1.2-default (x86_64), built with libpci 3.1.7, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH10R". Enabling flash write... OK. Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. test131:/media/flashrom #

4 4

Re: [flashrom] Numonyx M25P40 - erase & write OK
by Stefan Tauner 10 Dec '11

10 Dec '11

On Fri, 2 Dec 2011 19:46:13 +0100 Nikita Schmidt <nikita.schmidt(a)gmail.com> wrote: > Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:EW, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S Hello Nikita, thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. Your log shows that only the first block was erased and written. All others were skipped because the data was already equal to the input, so this run was not a very thorough test. I'd like to know if you have done more writes and happen to know if the other blocks were not skipped in those cases? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

QM67 based board is working
by Andy Loso 10 Dec '11

10 Dec '11

Seems to read/erase/write correctly. Also correctly identifies a Macronix flash chip "MX25L6405" (8192 kB, SPI). Flashrom -Vr flashrom v0.9.4-r1470 on Linux 2.6.39.4-sisters (x86_64), built with libpci 2.2.4, GCC 4.1.2 20070925 (Red Hat 4.1.2-27), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2097M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 10419 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To be filled by O.E.M." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "INTEL Corporation" DMI string baseboard-product-name: "HURONRIVER" DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found chipset "Intel QM67" with PCI ID 8086:1c4f. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00602a43 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x07ff0600 (FREG1: BIOS) 0x00600000-0x007fffff is read-write 0x5C: 0x05ff0023 (FREG2: Management Engine) 0x00023000-0x005fffff is read-write 0x60: 0x00220021 (FREG3: Gigabit Ethernet) 0x00021000-0x00022fff is read-write 0x64: 0x00200001 (FREG4: Platform Data) 0x00001000-0x00020fff is read-write 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching disabled, caching enabled, OK. This programmer supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L6405" (8192 kB, SPI) at physical address 0xff800000. Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Macronix flash chip "MX25L6405" (8192 kB, SPI). === This flash part has status UNTESTED for operations: READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Restoring MMIO space at 0x7fd380f4f8a0 Restoring PCI config space for 00:1f:0 reg 0xdc Flashrom -Vw flashrom v0.9.4-r1470 on Linux 2.6.39.4-sisters (x86_64), built with libpci 2.2.4, GCC 4.1.2 20070925 (Red Hat 4.1.2-27), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2097M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To be filled by O.E.M." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "INTEL Corporation" DMI string baseboard-product-name: "HURONRIVER" DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found chipset "Intel QM67" with PCI ID 8086:1c4f. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x07ff0600 (FREG1: BIOS) 0x00600000-0x007fffff is read-write 0x5C: 0x05ff0023 (FREG2: Management Engine) 0x00023000-0x005fffff is read-write 0x60: 0x00220021 (FREG3: Gigabit Ethernet) 0x00021000-0x00022fff is read-write 0x64: 0x00200001 (FREG4: Platform Data) 0x00001000-0x00020fff is read-write 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf97f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching disabled, caching enabled, OK. This programmer supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L6405" (8192 kB, SPI) at physical address 0xff800000. Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x24, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xc2, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Macronix flash chip "MX25L6405" (8192 kB, SPI). === This flash part has status UNTESTED for operations: READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:S, 0x210000-0x21ffff:S, 0x220000-0x22ffff:S, 0x230000-0x23ffff:S, 0x240000-0x24ffff:S, 0x250000-0x25ffff:S, 0x260000-0x26ffff:S, 0x270000-0x27ffff:S, 0x280000-0x28ffff:S, 0x290000-0x29ffff:S, 0x2a0000-0x2affff:S, 0x2b0000-0x2bffff:S, 0x2c0000-0x2cffff:S, 0x2d0000-0x2dffff:S, 0x2e0000-0x2effff:S, 0x2f0000-0x2fffff:S, 0x300000-0x30ffff:S, 0x310000-0x31ffff:S, 0x320000-0x32ffff:S, 0x330000-0x33ffff:S, 0x340000-0x34ffff:S, 0x350000-0x35ffff:S, 0x360000-0x36ffff:S, 0x370000-0x37ffff:S, 0x380000-0x38ffff:S, 0x390000-0x39ffff:S, 0x3a0000-0x3affff:S, 0x3b0000-0x3bffff:S, 0x3c0000-0x3cffff:S, 0x3d0000-0x3dffff:S, 0x3e0000-0x3effff:S, 0x3f0000-0x3fffff:S, 0x400000-0x40ffff:S, 0x410000-0x41ffff:S, 0x420000-0x42ffff:S, 0x430000-0x43ffff:S, 0x440000-0x44ffff:S, 0x450000-0x45ffff:S, 0x460000-0x46ffff:S, 0x470000-0x47ffff:S, 0x480000-0x48ffff:S, 0x490000-0x49ffff:S, 0x4a0000-0x4affff:S, 0x4b0000-0x4bffff:S, 0x4c0000-0x4cffff:S, 0x4d0000-0x4dffff:S, 0x4e0000-0x4effff:S, 0x4f0000-0x4fffff:S, 0x500000-0x50ffff:S, 0x510000-0x51ffff:S, 0x520000-0x52ffff:S, 0x530000-0x53ffff:S, 0x540000-0x54ffff:S, 0x550000-0x55ffff:S, 0x560000-0x56ffff:S, 0x570000-0x57ffff:S, 0x580000-0x58ffff:S, 0x590000-0x59ffff:S, 0x5a0000-0x5affff:S, 0x5b0000-0x5bffff:S, 0x5c0000-0x5cffff:S, 0x5d0000-0x5dffff:S, 0x5e0000-0x5effff:S, 0x5f0000-0x5fffff:S, 0x600000-0x60ffff:S, 0x610000-0x61ffff:S, 0x620000-0x62ffff:S, 0x630000-0x63ffff:S, 0x640000-0x64ffff:S, 0x650000-0x65ffff:S, 0x660000-0x66ffff:S, 0x670000-0x67ffff:S, 0x680000-0x68ffff:S, 0x690000-0x69ffff:S, 0x6a0000-0x6affff:S, 0x6b0000-0x6bffff:S, 0x6c0000-0x6cffff:S, 0x6d0000-0x6dffff:S, 0x6e0000-0x6effff:S, 0x6f0000-0x6fffff:S, 0x700000-0x70ffff:S, 0x710000-0x71ffff:S, 0x720000-0x72ffff:S, 0x730000-0x73ffff:S, 0x740000-0x74ffff:S, 0x750000-0x75ffff:S, 0x760000-0x76ffff:S, 0x770000-0x77ffff:S, 0x780000-0x78ffff:S, 0x790000-0x79ffff:S, 0x7a0000-0x7affff:S, 0x7b0000-0x7bffff:S, 0x7c0000-0x7cffff:S, 0x7d0000-0x7dffff:S, 0x7e0000-0x7effff:S, 0x7f0000-0x7fffff:S Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0x7f757c3e28a0 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

ASUS P8H67-M PRO not working
by Marek Zakrzewski 10 Dec '11

10 Dec '11

Flashrom latest version from SVN. flashrom -V flashrom v0.9.4-r1395 on Linux 2.6.32-131.17.1.el6.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.5 20110214 (Red Hat 4.4.5-6), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3409M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H67-M PRO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xac, id2 0x94, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 No operations were specified. Restoring MMIO space at 0x7f5a8d0b58a0 Restoring MMIO space at 0x7f5a8d0b589c Restoring MMIO space at 0x7f5a8d0b5898 Restoring MMIO space at 0x7f5a8d0b5896 Restoring MMIO space at 0x7f5a8d0b5894 Restoring PCI config space for 00:1f:0 reg 0xdc flashrom -w -V flashrom v0.9.4-r1395 on Linux 2.6.32-131.17.1.el6.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.5 20110214 (Red Hat 4.4.5-6), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3409M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H67-M PRO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xac, id2 0x94, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). FAILED. Restoring MMIO space at 0x7fe2d4fca8a0 Restoring MMIO space at 0x7fe2d4fca89c Restoring MMIO space at 0x7fe2d4fca898 Restoring MMIO space at 0x7fe2d4fca896 Restoring MMIO space at 0x7fe2d4fca894 Restoring PCI config space for 00:1f:0 reg 0xdc

3 3

Re: [flashrom] Gigabyte GA-MA785GM-US2H motherboard supported
by Stefan Tauner 10 Dec '11

10 Dec '11

On Sat, 3 Dec 2011 07:10:05 -0800 Ron Hossack <ronslinux(a)gmail.com> wrote: > I didn't find my specific MB listed and wanted to check and see if it's ok > to use flashrom with this one. > > Info: http://www.gigabyte.us/products/product-page.aspx?pid=3141&dl=1#ov > > Thanks I can't tell from the website/specs alone. Please provide at least a verbose log of a probing run of flashrom (just flashrom -V). This is very safe to do and will just look for supported hardware. We won't know for sure if your board will work with the verbose log either (but may be able to infer that it surely can not work), you will have to try. Usually if it fails there is just a write protection of the complete flash chip which we have to disable. Failures that brick the board should not happen with newer versions of flashrom (unless you really force it to). Please always use at least the latest stable release (0.9.4 at the moment). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Supermicro X9SCA-F with Intel C204 chipset
by Michael Fuckner 10 Dec '11

10 Dec '11

I just tried to read Flash from Supermicros X9SCA-F, but it doesn't work. Anything else I should try? Regards, Michael!

2 1

"Intel H61" with PCI ID 8086:1c5c. including a verbose (-V) log
by Fabio 10 Dec '11

10 Dec '11

[studio@myhost ~]$ sudo flashrom -V flashrom v0.9.4-r1395 on Linux 3.0-rt (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2868M loops per second, 10 myus = 9 us, 100 myus = 98 us, 1000 myus = 972 us, 10000 myus = 10144 us, 4 myus = 6 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: comando não encontrado dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-write 0x58: 0x03ff0200 (FREG1: BIOS) 0x00200000-0x003fffff is read-write 0x5C: 0x01ff0001 (FREG2: Management Engine) 0x00001000-0x001fffff is read-write 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x84, id2 0xd2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xcd, id2 0xe1, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x01, id2 0x25, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 No operations were specified. Restoring MMIO space at 0xb76fb8a0 Restoring MMIO space at 0xb76fb89c Restoring MMIO space at 0xb76fb898 Restoring MMIO space at 0xb76fb896 Restoring MMIO space at 0xb76fb894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 3

Re: [flashrom] P8H61 PRO
by Stefan Tauner 10 Dec '11

10 Dec '11

On Thu, 1 Dec 2011 01:45:03 +0600 Pavel Petrov <novoagansk(a)gmail.com> wrote: > 0x5C: 0x017f0001 (FREG2: Management Engine) > 0x00001000-0x0017ffff is locked Hello Pavel, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it, but intel does not provide us any documentation so please do not expect a solution soon. I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[PATCH] Cross-compilation fixes
by Carl-Daniel Hailfinger 09 Dec '11

09 Dec '11

Switch from host OS detection to target OS detection. Complain about unknown target OS/architecture. Disable annoying format string warnings on DJGPP. Native and cross-compilation now usually just require setting CC. Examples: make CC=i586-pc-msdosdjgpp-gcc make CC="clang -m64" make CC=i686-w64-mingw32-gcc I tested the following compilation types: i386 Linux native (gcc, clang) i386 Linux -> x86_64 Linux (clang) i386 Linux -> MinGW32 i386 Linux -> DJGPP I'd appreciate tests for: x86_64 Linux native MinGW native Cygwin native powerpc Linux native mips Linux native Mac OS X native *BSD native cross-compile for anything you want to test libpayload Please check if the final executable has the right type (arch/OS) and filename extension, and if make detects the right target arch/OS. I expect problems with Cygwin. Please check and report. There is a new target: "make libpayload" in case you don't want to specify all tools by hand. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-crosscompile/os.h =================================================================== --- flashrom-crosscompile/os.h (Revision 0) +++ flashrom-crosscompile/os.h (Revision 0) @@ -0,0 +1,58 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Header file for OS checking. + */ + +// Solaris +#if defined (__sun) && (defined(__i386) || defined(__amd64)) +#define __FLASHROM_OS__ "SunOS" +// OS X +#elif defined(__MACH__) && defined(__APPLE__) +#define __FLASHROM_OS__ "Darwin" +// FreeBSD +#elif defined(__FreeBSD__) +#define __FLASHROM_OS__ "FreeBSD" +// DragonFlyBSD +#elif defined(__DragonFly__) +#define __FLASHROM_OS__ "DragonFlyBSD" +// NetBSD +#elif defined(__NetBSD__) +#define __FLASHROM_OS__ "NetBSD" +// OpenBSD +#elif defined(__OpenBSD__) +#define __FLASHROM_OS__ "OpenBSD" +// DJGPP +#elif defined(__DJGPP__) +#define __FLASHROM_OS__ "DOS" +// MinGW (always has _WIN32 available) +#elif defined(__MINGW32__) +#define __FLASHROM_OS__ "MinGW" +// Cygwin (usually without _WIN32) +#elif defined( __CYGWIN__) +#define __FLASHROM_OS__ "Cygwin" +// libpayload +#elif defined(__LIBPAYLOAD__) +#define __FLASHROM_OS__ "libpayload" +// Linux +#elif defined(__linux__) +#define __FLASHROM_OS__ "Linux" +#endif +__FLASHROM_OS__ Index: flashrom-crosscompile/Makefile =================================================================== --- flashrom-crosscompile/Makefile (Revision 1471) +++ flashrom-crosscompile/Makefile (Arbeitskopie) @@ -37,27 +37,40 @@ CFLAGS += -Werror endif -# FIXME We have to differentiate between host and target OS architecture. -OS_ARCH ?= $(shell uname) -ifneq ($(OS_ARCH), SunOS) +# HOST_OS is only used to work around local toolchain issues. +HOST_OS ?= $(shell uname) +ifeq ($(HOST_OS), MINGW32_NT-5.1) +# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". +CC = gcc +endif +ifneq ($(HOST_OS), SunOS) STRIP_ARGS = -s endif -ifeq ($(OS_ARCH), Darwin) + +# Determine the destination processor architecture. +# IMPORTANT: The following line must be placed before TARGET_OS is ever used +# (of course), but should come after any lines setting CC because the line +# below uses CC itself. +override TARGET_OS := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) + +ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include # DirectHW framework can be found in the DirectHW library. LDFLAGS += -framework IOKit -framework DirectHW -L/opt/local/lib -L/usr/local/lib endif -ifeq ($(OS_ARCH), FreeBSD) +ifeq ($(TARGET_OS), FreeBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe CPPFLAGS += -I../libgetopt -I../libpci/include +# DJGPP has odd uint*_t definitions which cause lots of format string warnings. +CPPFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt LIBS += ../libgetopt/libgetopt.a # Bus Pirate and Serprog are not supported under DOS (missing serial support). @@ -84,9 +97,9 @@ endif endif -ifeq ($(OS_ARCH), MINGW32_NT-5.1) -# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found". -CC = gcc +# FIXME: Should we check for Cygwin/MSVC as well? +ifeq ($(TARGET_OS), MinGW) +EXEC_SUFFIX := .exe # MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs(). CFLAGS += -Dffs=__builtin_ffs # libusb-win32/libftdi stuff is usually installed in /usr/local. @@ -166,10 +179,7 @@ endif endif -ifeq ($(OS_ARCH), libpayload) -CC:=CC=i386-elf-gcc lpgcc -AR:=i386-elf-ar -RANLIB:=i386-elf-ranlib +ifeq ($(TARGET_OS), libpayload) CPPFLAGS += -DSTANDALONE ifeq ($(CONFIG_DUMMY), yes) UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes @@ -202,10 +212,10 @@ # Determine the destination processor architecture. # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line -# below uses CC itself. In some cases we set CC based on OS_ARCH, see above. -override ARCH := $(strip $(shell LC_ALL=C $(CC) -E arch.h 2>/dev/null | grep -v '^\#')) +# below uses CC itself. +override ARCH := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E arch.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) -ifeq ($(ARCH), "ppc") +ifeq ($(ARCH), ppc) # There's no PCI port I/O support on PPC/PowerPC, yet. ifeq ($(CONFIG_NIC3COM), yes) UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes @@ -348,7 +358,7 @@ ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o dmi.o internal.o -ifeq ($(ARCH),"x86") +ifeq ($(ARCH),x86) PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o wbsio_spi.o mcp6x_spi.o PROGRAMMER_OBJS += ichspi.o ich_descriptors.o else @@ -476,7 +486,7 @@ endif ifeq ($(NEED_NET), yes) -ifeq ($(OS_ARCH), SunOS) +ifeq ($(TARGET_OS), SunOS) LIBS += -lsocket endif endif @@ -485,18 +495,18 @@ CHECK_LIBPCI = yes FEATURE_CFLAGS += -D'NEED_PCI=1' PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o -ifeq ($(OS_ARCH), NetBSD) +ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. LIBS += -lpciutils -lpci # For (i386|x86_64)_iopl(2). LIBS += -l$(shell uname -p) else -ifeq ($(OS_ARCH), DOS) +ifeq ($(TARGET_OS), DOS) # FIXME There needs to be a better way to do this LIBS += ../libpci/lib/libpci.a else LIBS += -lpci -ifeq ($(OS_ARCH), OpenBSD) +ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). LIBS += -l$(shell uname -m) endif @@ -564,11 +574,16 @@ echo "found." || ( echo "not found."; \ rm -f .test.c .test$(EXEC_SUFFIX); exit 1) @rm -f .test.c .test$(EXEC_SUFFIX) - @printf "ARCH is " + @printf "Target arch is " @# FreeBSD wc will output extraneous whitespace. - @echo $(ARCH)|wc -l|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + @echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ ( echo "unknown. Aborting."; exit 1) @printf "%s\n" '$(ARCH)' + @printf "Target OS is " + @# FreeBSD wc will output extraneous whitespace. + @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \ + ( echo "unknown. Aborting."; exit 1) + @printf "%s\n" '$(TARGET_OS)' define LIBPCI_TEST /* Avoid a failing test due to libpci header symbol shadowing breakage */ @@ -684,7 +699,9 @@ @echo Created $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 djgpp-dos: clean - make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip WARNERROR=no OS_ARCH=DOS + make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip +libpayload: clean + make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib .PHONY: all clean distclean compiler pciutils features export tarball dos featuresavailable -- http://www.hailfinger.org/

3 3

Re: [flashrom] Question about using flash programmer for Dell BIOS
by Marcos Felipe Rasia de Mello 08 Dec '11

08 Dec '11

2011/12/8 Delyan Zhekov <d.zhekov(a)gmail.com> > Hello, I found your forum during the great search for answers of mine. It > all has to do with dell optiplex gx240 BIOS. The problem: I have to write a > BIOS file to a SST49LF004A-33-4C-NH chip using a flash programmer. I > downloaded the .exe file and extracted .hdr and .rom files from it and I > have no idea which to use with the programmer. I also found a tool > converting .hdr to .bin but the .bin file is more than 5MB in size. I am > totally lost. Could you give me a direction what file should I use with the > flash programmer. Thank you. > > Delyan Zhekov > > Run the Dell update utility in Windows (or Wine maybe) with "-writeromfile" and program the .rom file it will create. Marcos

1 0

Re: [flashrom] Question about using flash programmer for Dell BIOS
by Pete Batard 08 Dec '11

08 Dec '11

On 2011.12.08 16:36, Delyan Zhekov wrote: > I also found a tool converting .hdr to .bin What tool did you use? I remember looking for something like that some time ago, when I had to flash a GX BIOS from an HDR, but I wasn't able to locate one then. In the end, I had to fallback to using dellBiosUpdate, from smbios-utils on Linux, instead of flashrom :( > but the .bin file is more than 5MB > in size. I am totally lost. Could you give me a direction what file > should I use with the flash programmer. Thank you. I'm hoping someone else will be able to give directions on how to be able to use flashrom when provided with a Dell HDR file. In case they don't, you should still be able to flash an HDR using Ubuntu (eg. from a live CD) by doing something like this: o apt-get install smbios-utils firmware-addon-dell o retreive your HDR from network or USB o dellBiosUpdate --hdr <your_firmware.hdr> NB: you may have to issue an apt-get-update first and tweak the settings so that the Ubuntu repositories you fetch from include "Universe". Additional options for dellBiosUpdate are also provided here [1]. Again, if there's any possibility to use flashrom, you should go for it, as I remember the dellBiosUpdate seemed very dumb and didn't even provide any kind of progress indication. Regards, /Pete [1] http://linux.dell.com/libsmbios/main/dellBiosUpdate.html

1 0

Question about using flash programmer for Dell BIOS
by Delyan Zhekov 08 Dec '11

08 Dec '11

Hello, I found your forum during the great search for answers of mine. It all has to do with dell optiplex gx240 BIOS. The problem: I have to write a BIOS file to a SST49LF004A-33-4C-NH chip using a flash programmer. I downloaded the .exe file and extracted .hdr and .rom files from it and I have no idea which to use with the programmer. I also found a tool converting .hdr to .bin but the .bin file is more than 5MB in size. I am totally lost. Could you give me a direction what file should I use with the flash programmer. Thank you. Delyan Zhekov

1 0

Re: [flashrom] [PATCH] updated motherboards URL in print.c
by Carl-Daniel Hailfinger 08 Dec '11

08 Dec '11

Hi Benjamin, I have forward ported your changes. Sorry it took me so long. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Committed in r1472 with minor updates. Regards, Carl-Daniel Am 27.07.2011 08:51 schrieb Benjamin: > Hi, > > OK, I guess I have nothing to do now? > > Benjamin > > 2011/7/26 Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > >> > Hi Benjamin, >> > >> > Am 12.07.2011 20:34 schrieb Stefan Tauner: >>> > > On Mon, 04 Jul 2011 22:15:31 +0200 >>> > > Benjamin Bellec <b.bellec(a)gmail.com> wrote: >>> > > >>> > > >>>> > >> Updated motherboards URL, v2 >>>> > >> >>> > > hello benjamin >>> > > >>> > > i am still not sure about the asus urls so i left them out for now. >>> > > but i have committed all others (with minor changes) locally and will >>> > > push that to the main svn later. thanks for your work! >>> > > >> > >> > Here is the ASUS URL patch against latest flashrom. Since you wrote it, >> > I have kept your signoff. There are a few ASUS URLs left which have >> > product.aspx in there, but unfortunately the automatic redirect fails >> > for them. Not sure how to proceed. >> > >> > Regards, >> > Carl-Daniel >> > >> > Signed-off-by: Benjamin Bellec <b.bellec(a)gmail.com> >> > -- http://www.hailfinger.org/

1 0

[commit] r1472 - trunk
by repository service 08 Dec '11

08 Dec '11

Author: hailfinger Date: Thu Dec 8 08:49:11 2011 New Revision: 1472 URL: http://flashrom.org/trac/flashrom/changeset/1472 Log: Update URLs in print.c Move Asus A8Jm, Asus M6Ne to the laptop section. No working URL for the A8Jm found. Signed-off-by: Benjamin Bellec <b.bellec(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/print.c Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Dec 2 22:48:17 2011 (r1471) +++ trunk/print.c Thu Dec 8 08:49:11 2011 (r1472) @@ -570,61 +570,59 @@ B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), - B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), - B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), + B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), + B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), - B("ASUS", "A7V400-MX", 1, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL), - B("ASUS", "A7V600-X", 1, "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k", NULL), - B("ASUS", "A7V8X", 1, "http://www.asus.com/product.aspx?P_ID=qfpaGrAy2kLVo0f2", NULL), - B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/product.aspx?P_ID=SEJOOYqfuQPitx2H", NULL), - B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ", NULL), - B("ASUS", "A7V8X-X", 1, "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw", NULL), - B("ASUS", "A8Jm", 1, "http://www.asus.com/product.aspx?P_ID=VztICtOgiU6drx4m", NULL), + B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), + B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), + B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), + B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), + B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), + B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), - B("ASUS", "A8N-E", 1, "http://www.asus.com/product.aspx?P_ID=DzbA8hgqchMBOVRz", NULL), + B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), - B("ASUS", "A8N-SLI", 1, "http://www.asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK", NULL), + B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."), - B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/product.aspx?P_ID=nbulqxniNmzf0mH1", NULL), + B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), - B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=JBqqlpj4cspbSa3s", NULL), + B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), - B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL), - B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL), - B("ASUS", "A8V-E SE", 1, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), - B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/product.aspx?P_ID=EIDxaW1Ln3YR9RA2", NULL), - B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/product.aspx?P_ID=lt1ShF6xEn3rlLe7", NULL), - B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/product.aspx?P_ID=9BmKhMwWCwqyl1lz", NULL), - B("ASUS", "K8N", 1, "http://www.asus.com/product.aspx?P_ID=zigzffr75jWJ7j2y", NULL), - B("ASUS", "K8V", 1, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL), - B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o", NULL), - B("ASUS", "K8V-X", 1, NULL, NULL), - B("ASUS", "K8V-X SE", 1, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL), - B("ASUS", "M2A-MX", 1, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL), - B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), - B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=0jMy2X8lKstYRvev", NULL), - B("ASUS", "M2N-E", 1, "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), - B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=NJ8fkR6ufRM9XvFC", NULL), - B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=szSFtrap7crpBaQE", NULL), - B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF", NULL), - B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/product.aspx?P_ID=HGTVnGv5nGahCYgK", NULL), - B("ASUS", "M2V", 1, "http://www.asus.com/product.aspx?P_ID=OqYlEDFfF6ZqZGvp", NULL), - B("ASUS", "M2V-MX", 1, "http://www.asus.com/product.aspx?P_ID=7grf8Ci4yxnqzt3z", NULL), - B("ASUS", "M3A", 1, "http://www.asus.com/product.aspx?P_ID=P48rppKk4jrc9pNd", NULL), - B("ASUS", "M3A76-CM", 1, "http://www.asus.com/product.aspx?P_ID=aU8effdifLvraVze", NULL), - B("ASUS", "M3A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL), - B("ASUS", "M3N78-VM", 1, "http://www.asus.com/product.aspx?P_ID=ovqEgLFRjnSClhSV", NULL), - B("ASUS", "M4A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=0KyowHKUFAQqH2DO", NULL), - B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/product.aspx?P_ID=fcsXWSxnhzZE9rnR", NULL), - B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/product.aspx?P_ID=QHbvGVB1mXmmD8qQ", NULL), - B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/product.aspx?P_ID=exJL00uovTJaDqxR", NULL), - B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), - B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), - B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/product.aspx?P_ID=Gdf0vtpVf72LTYgs", NULL), + B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), + B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), + B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), + B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), + B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), + B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), + B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), + B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), + B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), + B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), + B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), + B("ASUS", "M2A-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), + B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), + B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), + B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), + B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), + B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), + B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), + B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), + B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), + B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), + B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), + B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), + B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), + B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), + B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), + B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), + B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), + B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), + B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), - B("ASUS", "M6Ne", 0, "http://www.asus.com/Product.aspx?P_ID=IbqN4JCxeRiep4WN", "Untested board enable."), B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), @@ -638,53 +636,53 @@ B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), - B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), - B("ASUS", "P4GV-LA (Guppy)", 1, NULL, NULL), - B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), - B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), - B("ASUS", "P4P800-VM", 1, NULL, NULL), + B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), + B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), + B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), + B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), + B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), - B("ASUS", "P4S800-MX", 1, "http://www.asus.com/product.aspx?P_ID=Bb57zoJhmO1Qkcrh", NULL), + B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), - B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=bswT66IBSb2rEWNa", NULL), + B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), - B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/product.aspx?P_ID=PYvbfOokwxUzJky3", NULL), - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/product.aspx?P_ID=50M49xQh71EZOeM1", NULL), + B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), + B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."), - B("ASUS", "P5GD2 Premium", 1, "http://www.asus.it/product.aspx?P_ID=lRKaz1Rb6Xb0OFM7", NULL), - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=AbeoopyNpI2TZixg", NULL), - B("ASUS", "P5GDC-V Deluxe", 1, NULL, NULL), + B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), + B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), + B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), - B("ASUS", "P5K-VM", 1, "http://www.asus.com/product.aspx?P_ID=EJybwaQ3J8goocW2", NULL), - B("ASUS", "P5KC", 1, "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj", NULL), - B("ASUS", "P5L-MX", 1, "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH", NULL), - B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/product.aspx?P_ID=G0BQ4fIXoM1P38TZ", NULL), + B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), + B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), + B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), + B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/product.aspx?P_ID=KyHOsOKWujC2QguJ", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), + B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), - B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=vBZLIBtPzYB2bLcb", NULL), - B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5", NULL), - B("ASUS", "P5PE-VM", 1, "http://www.asus.com/product.aspx?P_ID=k3h0ZFVu9Lo1dUvk", NULL), + B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), + B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), + B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), - B("ASUS", "P6T SE", 1, "http://www.asus.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E", NULL), - B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL), - B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), + B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), + B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), + B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), - B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/product.aspx?P_ID=z1K4qLpLmyLfwXtw", NULL), + B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), + B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -934,7 +932,9 @@ #if defined(__i386__) || defined(__x86_64__) B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), - B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "A8Jm", 1, NULL, NULL), + B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),

1 0

Re: [flashrom] Patches + RFC: Deal with locked ICH flash descriptor regions transparently
by Stefan Tauner 07 Dec '11

07 Dec '11

hey and thanks for working on getting stuff back upstream! i have very little time at the moment (and the next few weeks) so i just skimmed over the patches a few days ago and will just mention the main points i noticed. On Fri, 2 Dec 2011 17:38:20 -0800 David Hendricks <dhendrix(a)google.com> wrote: > The following patches (attached and in-lined below) add support for > "graceful" handling of certain errors and in particular the read/write > errors that occur on newer Intel chipsets. With a little work, it could be > extended to handle SPI hardware write protection schema, too. 1. the patches seemed to be divided in a little bit odd way, but that might actually be because i did not read that carefully. btw please post one patch per mail so that patchwork recognize them all. > Note: I think we should probably add a "I_want_a_brick" programmer > parameter for those daring enough to try this. I suspect certain OEM tools > use unknown Mebx > commands<http://support.dell.com/support/edocs/systems/latd630/en/amt/MEBX.htm>to > disable ME read/write protection when they do updates. Perhaps that > stuff can be added later as a board_enable thing. 2. i dont know enough about MEBx, but i have not found any mention of it in any official documentation about ME unlocking - public or otherwise. the user interface as shown on the dell screenshot might not be accessible for users. i need to test if the MEBx settings have any influence on the ICH registers on my ICH10 based (and locked) intel board. wont happen soon though. 3. the official way to disabled the ME locking is via an HECI™/MEI™ service™ with™ the™ HMRFPO™ Enable™ Intel® command™. the MEI protocol is packet-based and well documented including an open source linux kernel module. i have ported this to flashrom and will try to get it into a mergeable state in the future. the only missing part then is the right MEI command/reply sequence to unlock the ME region. the integration would not use board enables but the unlocking would be done automatically in ich_init (and re-enabling in shutdown, if we could figure out how... not that important imho because it is security be obscurity anyway). the HMRFPO command is documented in the BIOS writer guide(s). > With the patches applied, the low-level ICH code will handle all the > details of checking the address associated with an opcode against the > permissions set in the flash descriptor. If an operation cannot be > performed on a given region, an error code is propagated up the stack so > that high-level read/write logic can decide to skip that region. As is, the > patch will make the high-level logic fill in unreadable regions with 0xff > bytes (for reads) and will quietly skip over unwriteable regions (for > writes). > > The biggest downside is, of course, that read/write operations no longer do > exactly what one might expect. A full read operation (flashrom -r) will > give you a ROM-sized image with 0xff bytes wherever read is forbidden (e.g. > where the management engine firmware lives). A full write operation will > skip forbidden regions (e.g. flash descriptor and ME) which may leave stuff > in an inconsistent and potentially unusable state (thanks, Intel!). 4. i dont like the overall approach of the patches at all. they complicate the most complicated parts of flashrom even more (chunked read/erase/write) for little gain for an even littler target audience (no offense google :). the init code can already tell the upper level code which parts are accessible and which are not. there is no need to fiddle around with the opcodes on the fly (in addition to what we do to reprogram opcodes because we are forced to... :) i would like to do this in a less intrusive and more generic way by means of layout(file)s. patches for enabling the usage of layouts in all program modes exists already and would give anyone who dares an easy way to operate on any accessible region on its own (reviews are welcome! :P). an additional layout file generation by programmer init code (when told so) or a generic automagic mode that queries the programmer, the flash chip and maybe other modules for access rights to plan the whole operation before really issuing read/erase/write commands (a level above your implementation) would give us the same functionality, but also would be useful for non-ich users, generic to be extended in the future and most importantly: it would not touch the core read/write functions. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

untested configuration
by Oliver Lehmann 07 Dec '11

07 Dec '11

Hi, I hope this helps.... > flashrom -V --read /root/bios.img flashrom v0.9.4-r1395 on FreeBSD 9.0-BETA2 (amd64), built with libpci 3.1.8, GCC 4.2.2 20070831 prerelease [FreeBSD], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 2 usecs, 782M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 987 us, 10000 myus = 9996 us, 8 myus = 10 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "AT3N7A-I" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8720 on port 0x2e Found chipset "NVIDIA MCP79" with PCI ID 10de:0aad. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0aa2 at 00:03:2 MCP SPI BAR is at 0xf9e80000 Mapping NVIDIA MCP6x SPI at 0xf9e80000, unaligned size 0x544. SPI control is 0xc052, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. No IT87* serial flash segment enabled. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Reading flash... done. >

1 0

ASUS P8H67-M PRO not working
by Marek Zakrzewski 07 Dec '11

07 Dec '11

flashrom -V flashrom v0.9.4-r1395 on Linux 2.6.32-131.17.1.el6.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.5 20110214 (Red Hat 4.4.5-6), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3409M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H67-M PRO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xac, id2 0x94, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 No operations were specified. Restoring MMIO space at 0x7f5a8d0b58a0 Restoring MMIO space at 0x7f5a8d0b589c Restoring MMIO space at 0x7f5a8d0b5898 Restoring MMIO space at 0x7f5a8d0b5896 Restoring MMIO space at 0x7f5a8d0b5894 Restoring PCI config space for 00:1f:0 reg 0xdc flashrom -w -V flashrom v0.9.4-r1395 on Linux 2.6.32-131.17.1.el6.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.5 20110214 (Red Hat 4.4.5-6), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3409M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H67-M PRO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel H67" with PCI ID 8086:1c4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done preop0=0x06, preop1=0x50 op[0]=0x02, 3, 0 op[1]=0x03, 2, 0 op[2]=0xd8, 3, 0 op[3]=0x05, 0, 0 op[4]=0x90, 2, 0 op[5]=0x01, 1, 0 op[6]=0x9f, 0, 0 op[7]=0xc7, 1, 0 SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A.RES, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xac, id2 0x94, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x57, id2 0x51, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x71, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). FAILED. Restoring MMIO space at 0x7fe2d4fca8a0 Restoring MMIO space at 0x7fe2d4fca89c Restoring MMIO space at 0x7fe2d4fca898 Restoring MMIO space at 0x7fe2d4fca896 Restoring MMIO space at 0x7fe2d4fca894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Re: [flashrom] (no subject)
by Bernd Blaauw 06 Dec '11

06 Dec '11

Op 5-12-2011 20:00, Antonio Gottlieb schreef: > flashrom v0.9.1-r946 There's a decent chance people will ask you to retest against either latest officially released version, or build your own from most recent sourcecode. All bits help though :)

1 0

(no subject)
by Antonio Gottlieb 05 Dec '11

05 Dec '11

flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "AM2NF6G-VSTA" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xbc000000, after clearing low bits BAR is at 0xbc000000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: LPC. Calibrating delay loop... 653M loops per second, 100 myus = 213 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Found chip "Winbond W39V040B" (512 KB, LPC) at physical address 0xfff80000. Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type LPC and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type LPC and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified.

1 0

(no subject)
by panagiotis lianeas 04 Dec '11

04 Dec '11

hi my name is Pete....I'm trying to replace my bios with core-boot.....i did the con-fig as seen on the net.... i also saw the warning.....IF SOMETHING GOES WRONG etc. i was wondering if somebody can guide me so nothing will go wrong....be happy to call one of you guys...and if applicable make a donation... thanks for your time.....

1 0

Gigabyte GA-MA785GM-US2H motherboard supported
by Ron Hossack 03 Dec '11

03 Dec '11

I didn't find my specific MB listed and wanted to check and see if it's ok to use flashrom with this one. Info: http://www.gigabyte.us/products/product-page.aspx?pid=3141&dl=1#ov Thanks

1 0

Patches + RFC: Deal with locked ICH flash descriptor regions transparently
by David Hendricks 03 Dec '11

03 Dec '11

The following patches (attached and in-lined below) add support for "graceful" handling of certain errors and in particular the read/write errors that occur on newer Intel chipsets. With a little work, it could be extended to handle SPI hardware write protection schema, too. Note: I think we should probably add a "I_want_a_brick" programmer parameter for those daring enough to try this. I suspect certain OEM tools use unknown Mebx commands<http://support.dell.com/support/edocs/systems/latd630/en/amt/MEBX.htm>to disable ME read/write protection when they do updates. Perhaps that stuff can be added later as a board_enable thing. The impetus for this is to overcome difficulties in dealing with new Intel platforms which use their flash descriptor layout, like this (using Pontus' H57 verbose output): 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x07ff0600 (FREG1: BIOS) 0x00600000-0x007fffff is read-write 0x5C: 0x05ff0001 (FREG2: Management Engine) 0x00001000-0x005fffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. In this case, the flashrom will abort due to a transaction error when it attempts to read or write offsets 0x001000-0x05fffff, or when it attempt to write new content to 0x000000-0x000fff. With the patches applied, the low-level ICH code will handle all the details of checking the address associated with an opcode against the permissions set in the flash descriptor. If an operation cannot be performed on a given region, an error code is propagated up the stack so that high-level read/write logic can decide to skip that region. As is, the patch will make the high-level logic fill in unreadable regions with 0xff bytes (for reads) and will quietly skip over unwriteable regions (for writes). The biggest downside is, of course, that read/write operations no longer do exactly what one might expect. A full read operation (flashrom -r) will give you a ROM-sized image with 0xff bytes wherever read is forbidden (e.g. where the management engine firmware lives). A full write operation will skip forbidden regions (e.g. flash descriptor and ME) which may leave stuff in an inconsistent and potentially unusable state (thanks, Intel!). Signed-off-by: David Hendricks <dhendrix(a)google.com> 1-3_error_handling_helper_function.diff: Index: flashrom-me/flash.h =================================================================== --- flashrom-me.orig/flash.h +++ flashrom-me/flash.h @@ -226,12 +226,25 @@ int write_buf_to_file(unsigned char *buf #define OK 0 #define NT 1 /* Not tested */ +/* what to do in case of an error */ +enum error_action { + error_fail, /* fail immediately */ + error_ignore, /* non-fatal error; continue */ +}; + /* Something happened that shouldn't happen, but we can go on. */ #define ERROR_NONFATAL 0x100 /* Something happened that shouldn't happen, we'll abort. */ #define ERROR_FATAL -0xee +/* Operation failed due to access restriction set in programmer or flash chip */ +#define ACCESS_DENIED -7 +extern enum error_action access_denied_action; + +/* convenience function for checking return codes */ +extern int ignore_error(int x); + /* cli_output.c */ /* Let gcc and clang check for correct printf-style format strings. */ int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); Index: flashrom-me/flashrom.c =================================================================== --- flashrom-me.orig/flashrom.c +++ flashrom-me/flashrom.c @@ -42,6 +42,25 @@ const char flashrom_version[] = FLASHROM char *chip_to_probe = NULL; int verbose = 0; +/* error handling stuff */ +enum error_action access_denied_action = error_ignore; + +/* returns boolean (1 if caller should ignore error code, 0 if not) */ +int ignore_error(int err) { + int ret = 0; + + switch(err) { + case ACCESS_DENIED: + if (access_denied_action == error_ignore) + ret = 1; + break; + default: + break; + } + + return ret; +} + static enum programmer programmer = PROGRAMMER_INVALID; static char *programmer_param = NULL; 2-3_update_spi_error_handling.diff: Index: flashrom-me/spi.c =================================================================== --- flashrom-me.orig/spi.c +++ flashrom-me/spi.c @@ -100,25 +100,35 @@ int default_spi_send_multicommand(struct int default_spi_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int max_data = spi_programmer->max_data_read; + int ret; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_read_chunked(flash, buf, start, len, max_data); + rc = spi_read_chunked(flash, buf, start, len, max_data); + /* translate SPI-specific access denied error to generic error */ + if (ret == SPI_ACCESS_DENIED) + rc = ACCESS_DENIED; + return ret; } int default_spi_write_256(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) { unsigned int max_data = spi_programmer->max_data_write; + int ret; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " "flashrom(a)flashrom.org\n", __func__); return 1; } - return spi_write_chunked(flash, buf, start, len, max_data); + ret = spi_write_chunked(flash, buf, start, len, max_data); + /* translate SPI-specific access denied error to generic error */ + if (ret == SPI_ACCESS_DENIED) + ret = ACCESS_DENIED; + return ret; } int spi_chip_read(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len) Index: flashrom-me/spi.h =================================================================== --- flashrom-me.orig/spi.h +++ flashrom-me/spi.h @@ -125,5 +125,6 @@ #define SPI_INVALID_LENGTH -4 #define SPI_FLASHROM_BUG -5 #define SPI_PROGRAMMER_ERROR -6 +#define SPI_ACCESS_DENIED -7 #endif /* !__SPI_H__ */ Index: flashrom-me/spi25.c =================================================================== --- flashrom-me.orig/spi25.c +++ flashrom-me/spi25.c @@ -916,8 +916,10 @@ int spi_nbyte_program(unsigned int addr, result = spi_send_multicommand(cmds); if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); + if (result != SPI_ACCESS_DENIED) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + } } return result; } @@ -970,7 +972,7 @@ int spi_nbyte_read(unsigned int address, */ int spi_read_chunked(struct flashchip *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize) { - int rc = 0; + int rc = 0, chunk_status = 0; unsigned int i, j, starthere, lenhere, toread; unsigned int page_size = flash->page_size; @@ -990,12 +992,26 @@ int spi_read_chunked(struct flashchip *f /* Length of bytes in the range in this page. */ lenhere = min(start + len, (i + 1) * page_size) - starthere; for (j = 0; j < lenhere; j += chunksize) { + uint8_t *bytes = buf + starthere - start + j; + toread = min(chunksize, lenhere - j); - rc = spi_nbyte_read(starthere + j, buf + starthere - start + j, toread); - if (rc) - break; + chunk_status = spi_nbyte_read(starthere + j, bytes, toread); + + if (chunk_status) { + if (ignore_error(chunk_status)) { + /* fill this chunk with 0xff bytes and + let caller know about the error */ + memset(bytes, 0xff, toread); + rc = chunk_status; + chunk_status = 0; + continue; + } else { + rc = chunk_status; + break; + } + } } - if (rc) + if (chunk_status) break; } Index: flashrom-me/flashrom.c =================================================================== --- flashrom-me.orig/flashrom.c +++ flashrom-me/flashrom.c @@ -583,6 +583,7 @@ int verify_range(struct flashchip *flash unsigned int i; uint8_t *readbuf = malloc(len); int ret = 0, failcount = 0; + unsigned int chunksize; if (!len) goto out_free; @@ -606,23 +607,35 @@ int verify_range(struct flashchip *flash if (!message) message = "VERIFY"; - ret = flash->read(flash, readbuf, start, len); - if (ret) { - msg_gerr("Verification impossible because read failed " - "at 0x%x (len 0x%x)\n", start, len); - return ret; - } + chunksize = min(flash->page_size, len); + for (i = 0; i < len; i += chunksize) { + int tmp, j; + + tmp = flash->read(flash, readbuf + i, start + i, chunksize); + + if (tmp) { + ret = tmp; + if (ignore_error(tmp)) { + chunksize = min(flash->page_size, len - i); + continue; + } else { + goto out_free; + } + } - for (i = 0; i < len; i++) { - if (cmpbuf[i] != readbuf[i]) { - /* Only print the first failure. */ - if (!failcount++) - msg_cerr("%s FAILED at 0x%08x! " - "Expected=0x%02x, Read=0x%02x,", - message, start + i, cmpbuf[i], - readbuf[i]); + for (j = 0; j < chunksize; j++) { + if (cmpbuf[i + j] != readbuf[i + j]) { + /* Only print the first failure. */ + if (!failcount++) + msg_cerr("%s FAILED at 0x%08x! " + "Expected=0x%02x, Read=0x%02x,", + message, start + i + j, cmpbuf[i + j], + readbuf[j]); + } } + chunksize = min(flash->page_size, len - i); } + if (failcount) { msg_cerr(" failed byte count from 0x%08x-0x%08x: 0x%x\n", start, start + len - 1, failcount); @@ -1057,6 +1070,16 @@ int verify_flash(struct flashchip *flash ret = verify_range(flash, buf, 0, total_size, NULL); + if (ret == ACCESS_DENIED) { + msg_gdbg("Could not fully verify due to access error, "); + if (access_denied_action == error_ignore) { + msg_gdbg("ignoring\n"); + ret = 0; + } else { + msg_gdbg("aborting\n"); + } + } + if (!ret) msg_cinfo("VERIFIED. \n"); @@ -1139,10 +1162,15 @@ int read_flash_to_file(struct flashchip ret = 1; goto out_free; } - if (flash->read(flash, buf, 0, size)) { - msg_cerr("Read operation failed!\n"); - ret = 1; - goto out_free; + + ret = flash->read(flash, buf, 0, size); + if (ret) { + if (ignore_error(ret)) { + ret = 0; + } else { + msg_cerr("Read operation failed!\n"); + goto out_free; + } } ret = write_buf_to_file(buf, size, filename); @@ -1243,8 +1271,14 @@ static int erase_and_write_block_helper( if (need_erase(curcontents, newcontents, len, gran)) { msg_cdbg("E"); ret = erasefn(flash, start, len); - if (ret) + if (ret) { + if (ret == ACCESS_DENIED) + msg_cdbg("D"); + else + msg_cerr("ERASE FAILED!\n"); return ret; + } + if (check_erased_range(flash, start, len)) { msg_cerr("ERASE FAILED!\n"); return -1; @@ -1262,8 +1296,11 @@ static int erase_and_write_block_helper( /* Needs the partial write function signature. */ ret = flash->write(flash, newcontents + starthere, start + starthere, lenhere); - if (ret) + if (ret) { + if (ret == ACCESS_DENIED) + msg_cdbg("D"); return ret; + } starthere += lenhere; skip = 0; } @@ -1284,7 +1321,7 @@ static int walk_eraseregions(struct flas unsigned int len)), void *param1, void *param2) { - int i, j; + int i, j, ret = 0; unsigned int start = 0; unsigned int len; struct block_eraser eraser = flash->block_erasers[erasefunction]; @@ -1300,15 +1337,19 @@ static int walk_eraseregions(struct flas msg_cdbg(", "); msg_cdbg("0x%06x-0x%06x", start, start + len - 1); - if (do_something(flash, start, len, param1, param2, - eraser.block_erase)) { - return 1; + ret = do_something(flash, start, len, param1, param2, + eraser.block_erase); + if (ret) { + if (ignore_error(ret)) + ret = 0; + else + return ret; } start += len; } } msg_cdbg("\n"); - return 0; + return ret; } static int check_block_eraser(const struct flashchip *flash, int k, int log) @@ -1695,7 +1736,7 @@ int doit(struct flashchip *flash, int fo { uint8_t *oldcontents; uint8_t *newcontents; - int ret = 0; + int ret = 0, tmp; unsigned long size = flash->total_size * 1024; if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { @@ -1768,10 +1809,15 @@ int doit(struct flashchip *flash, int fo * takes time as well. */ msg_cinfo("Reading old flash chip contents... "); - if (flash->read(flash, oldcontents, 0, size)) { - ret = 1; - msg_cinfo("FAILED.\n"); - goto out; + tmp = flash->read(flash, oldcontents, 0, size); + if (tmp) { + if (ignore_error(tmp)) { + msg_gdbg("ignoring error\n"); + } else { + ret = 1; + msg_cinfo("FAILED.\n"); + goto out; + } } msg_cinfo("done.\n"); 3-3_ichspi_deal_with_locked_regions.diff: Index: flashrom-me/ichspi.c =================================================================== --- flashrom-me.orig/ichspi.c +++ flashrom-me/ichspi.c @@ -983,6 +983,95 @@ static int run_opcode(OPCODE op, uint32_ } } +#define DEFAULT_NUM_FD_REGIONS 5 +static int num_fd_regions; + +const char *const region_names[] = { + "Flash Descriptor", "BIOS", "Management Engine", + "Gigabit Ethernet", "Platform Data" +}; + +enum fd_access_level { + FD_REGION_LOCKED, + FD_REGION_READ_ONLY, + FD_REGION_WRITE_ONLY, + FD_REGION_READ_WRITE, +}; + +struct fd_region_permission { + enum fd_access_level level; + const char *name; +} fd_region_permissions[] = { + /* order corresponds to FRAP bitfield */ + { FD_REGION_LOCKED, "locked" }, + { FD_REGION_READ_ONLY, "read-only" }, + { FD_REGION_WRITE_ONLY, "write-only" }, + { FD_REGION_READ_WRITE, "read-write" }, +}; + +/* FIXME: Replace usage of access_names with the region_access struct */ +const char *const access_names[4] = { + "locked", "read-only", "write-only", "read-write" +}; + +struct fd_region { + const char *name; + struct fd_region_permission *permission; + uint32_t base; + uint32_t limit; +} fd_regions[] = { + /* order corresponds to flash descriptor */ + { .name = "Flash Descriptor" }, + { .name = "BIOS" }, + { .name = "Management Engine" }, + { .name = "Gigabit Ethernet" }, + { .name = "Platform Data" }, +}; + +static int check_fd_permissions(OPCODE *opcode, uint32_t addr, int count) +{ + int i; + uint8_t type = opcode->spi_type; + int ret = 0; + + /* check flash descriptor permissions (if present) */ + for (i = 0; i < num_fd_regions; i++) { + const char *name = fd_regions[i].name; + enum fd_access_level level; + + if ((addr + count - 1 < fd_regions[i].base) || + (addr > fd_regions[i].limit)) + continue; + + if (!fd_regions[i].permission) { + msg_perr("No permissions set for flash region %s\n", + fd_regions[i].name); + break; + } + + level = fd_regions[i].permission->level; + + if (type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS) { + if (level != FD_REGION_READ_ONLY && + level != FD_REGION_READ_WRITE) { + msg_pspew("%s: Cannot read address 0x%08x in " + "region %s\n", __func__,addr,name); + ret = SPI_ACCESS_DENIED; + } + } else if (type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { + if (level != FD_REGION_WRITE_ONLY && + level != FD_REGION_READ_WRITE) { + msg_pspew("%s: Cannot write to address 0x%08x in" + "region %s\n", __func__,addr,name); + ret = SPI_ACCESS_DENIED; + } + } + break; + } + + return ret; +} + static int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { @@ -1045,19 +1134,6 @@ static int ich_spi_send_command(unsigned return SPI_INVALID_LENGTH; } - /* if opcode-type requires an address */ - if (opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS || - opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { - addr = (writearr[1] << 16) | - (writearr[2] << 8) | (writearr[3] << 0); - if (addr < ichspi_bbar) { - msg_perr("%s: Address 0x%06x below allowed " - "range 0x%06x-0xffffff\n", __func__, - addr, ichspi_bbar); - return SPI_INVALID_ADDRESS; - } - } - /* Translate read/write array/count. * The maximum data length is identical for the maximum read length and * for the maximum write length excluding opcode and address. Opcode and @@ -1076,6 +1152,24 @@ static int ich_spi_send_command(unsigned count = readcnt; } + /* if opcode-type requires an address */ + if (opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS || + opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { + addr = (writearr[1] << 16) | + (writearr[2] << 8) | (writearr[3] << 0); + if (addr < ichspi_bbar) { + msg_perr("%s: Address 0x%06x below allowed " + "range 0x%06x-0xffffff\n", __func__, + addr, ichspi_bbar); + return SPI_INVALID_ADDRESS; + } + if (num_fd_regions > 0) { + result = check_fd_permissions(opcode, addr, count); + if (result) + return result; + } + } + result = run_opcode(*opcode, addr, count, data); if (result) { msg_pdbg("Running OPCODE 0x%02x failed ", opcode->opcode); @@ -1421,32 +1515,25 @@ static int ich_spi_send_multicommand(str static void do_ich9_spi_frap(uint32_t frap, int i) { - static const char *const access_names[4] = { - "locked", "read-only", "write-only", "read-write" - }; - static const char *const region_names[5] = { - "Flash Descriptor", "BIOS", "Management Engine", - "Gigabit Ethernet", "Platform Data" - }; - uint32_t base, limit; int rwperms = (((ICH_BRWA(frap) >> i) & 1) << 1) | (((ICH_BRRA(frap) >> i) & 1) << 0); int offset = ICH9_REG_FREG0 + i * 4; uint32_t freg = mmio_readl(ich_spibar + offset); msg_pdbg("0x%02X: 0x%08x (FREG%i: %s)\n", - offset, freg, i, region_names[i]); + offset, freg, i, fd_regions[i].name); - base = ICH_FREG_BASE(freg); - limit = ICH_FREG_LIMIT(freg); - if (base > limit) { + fd_regions[i].base = ICH_FREG_BASE(freg); + fd_regions[i].limit = ICH_FREG_LIMIT(freg) | 0x0fff; + fd_regions[i].permission = &fd_region_permissions[rwperms]; + if (fd_regions[i].base > fd_regions[i].limit) { /* this FREG is disabled */ msg_pdbg("%s region is unused.\n", region_names[i]); return; } - msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff), - access_names[rwperms]); + msg_pdbg("0x%08x-0x%08x is %s\n", fd_regions[i].base, + fd_regions[i].limit, fd_regions[i].permission->name); } /* In contrast to FRAP and the master section of the descriptor the bits @@ -1460,9 +1547,6 @@ static void do_ich9_spi_frap(uint32_t fr static void prettyprint_ich9_reg_pr(int i) { - static const char *const access_names[4] = { - "locked", "read-only", "write-only", "read-write" - }; uint8_t off = ICH9_REG_PR0 + (i * 4); uint32_t pr = mmio_readl(ich_spibar + off); int rwperms = ICH_PR_PERMS(pr); @@ -1647,6 +1731,7 @@ int ich_init_spi(struct pci_dev *dev, ui ich_init_opcodes(); if (desc_valid) { + num_fd_regions = DEFAULT_NUM_FD_REGIONS; tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFC); msg_pdbg("0x06: 0x%04x (HSFC)\n", tmp2); prettyprint_ich9_reg_hsfc(tmp2); @@ -1664,15 +1749,15 @@ int ich_init_spi(struct pci_dev *dev, ui msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp)); /* Decode and print FREGx and FRAP registers */ - for (i = 0; i < 5; i++) + for (i = 0; i < num_fd_regions; i++) do_ich9_spi_frap(tmp, i); } /* try to disable PR locks before printing them */ if (!ichspi_lock) - for (i = 0; i < 5; i++) + for (i = 0; i < num_fd_regions; i++) ich9_set_pr(i, 0, 0); - for (i = 0; i < 5; i++) + for (i = 0; i < num_fd_regions; i++) prettyprint_ich9_reg_pr(i); tmp = mmio_readl(ich_spibar + ICH9_REG_SSFS); -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom