Re: [flashrom] [PATCH 7/8] check if write enable is really set in nicintel_spi_init (and minor comment changes).
by Idwer Vollering 20 Feb '12
by Idwer Vollering 20 Feb '12
20 Feb '12
2011/3/15 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>:
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Adding "pci_mmio_writel(FLASH_WRITES_DISABLED, nicintel_spibar +
EECD);" right after the usage of register_shutdown() works as it
should:
Initializing nicintel_spi programmer
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:01.0).
Requested BAR is MEM, 32bit, not prefetchable
Enabling flash write access failed.
Error: Programmer initialization failed.
Acked-by: Idwer Vollering <vidwer(a)gmail.com>
> ---
> nicintel_spi.c | 15 +++++++++++++--
> 1 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/nicintel_spi.c b/nicintel_spi.c
> index 811ed6e..88d86af 100644
> --- a/nicintel_spi.c
> +++ b/nicintel_spi.c
> @@ -34,11 +34,14 @@
>
> #define MEMMAP_SIZE getpagesize()
>
> +/* EEPROM/Flash Control & Data Register */
> #define EECD 0x10
> +/* Flash Access Register */
> #define FLA 0x1c
>
> /*
> * Register bits of EECD.
> + * Table 13-6
> *
> * Bit 04, 05: FWE (Flash Write Enable Control)
> * 00b = not allowed
> @@ -49,8 +52,9 @@
> #define FLASH_WRITES_DISABLED 0x10 /* FWE: 10000b */
> #define FLASH_WRITES_ENABLED 0x20 /* FWE: 100000b */
>
> -/* Flash Access register bits */
> -/* Table 13-9 */
> +/* Flash Access register bits
> + * Table 13-9
> + */
> #define FL_SCK 0
> #define FL_CS 1
> #define FL_SI 2
> @@ -157,6 +161,13 @@ int nicintel_spi_init(void)
> tmp |= FLASH_WRITES_ENABLED;
> pci_mmio_writel(tmp, nicintel_spibar + EECD);
>
> + /* test if FWE is really set to allow writes */
> + tmp = pci_mmio_readl(nicintel_spibar + EECD);
> + if ( (tmp & FLASH_WRITES_DISABLED) || !(tmp & FLASH_WRITES_ENABLED) ) {
> + msg_perr("Enabling flash write access failed.\n");
> + return 1;
> + }
> +
> /* 1 usec halfperiod delay for now. */
> if (bitbang_spi_init(&bitbang_spi_master_nicintel, 1))
> return 1;
> --
> 1.7.1
>
>
> _______________________________________________
> flashrom mailing list
> flashrom(a)flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
1
0
On Mon, 20 Feb 2012 18:17:58 +0100
Idwer Vollering <vidwer(a)gmail.com> wrote:
> > -#define OK 0
> > -#define NT 1 /* Not tested */
> > +enum test_state {
> > + OK = 0,
> > + NT = 1, /* Not tested */
> > + BAD
>
> BAD = -1 ?
i would prefer to leave it undefined. one point of using enums is to be
implementation-agnostic. the other values are only forced to 0/1 to not
break previously existing stuff, that relies on the values.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0
Re: [flashrom] [PATCH 1/5] print_wiki.c: count pci devices and cleanup
by Idwer Vollering 20 Feb '12
by Idwer Vollering 20 Feb '12
20 Feb '12
Can you incorporate this too?
$ svn diff pcidev.c
Index: pcidev.c
===================================================================
--- pcidev.c (revision 1504)
+++ pcidev.c (working copy)
@@ -244,7 +244,6 @@
{
int i;
- msg_pinfo("PCI devices:\n");
for (i = 0; devs[i].vendor_name != NULL; i++) {
msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
devs[i].device_name, devs[i].vendor_id,
$ svn diff print.c
Index: print.c
===================================================================
--- print.c (revision 1504)
+++ print.c (working copy)
@@ -422,6 +422,21 @@
}
#endif
+#if CONFIG_FT2232_SPI == 1
+void print_supported_usbdevs(const struct usbdev_status *devs)
+{
+ int i;
+
+ msg_pinfo("USB devices:\n");
+ for (i = 0; devs[i].vendor_name != NULL; i++) {
+ msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
+ devs[i].device_name, devs[i].vendor_id,
+ devs[i].device_id,
+ (devs[i].status == NT) ? " (untested)" : "");
+ }
+}
+#endif
+
void print_supported(void)
{
print_supported_chips();
@@ -444,42 +459,42 @@
msg_ginfo("Dummy device, does nothing and logs all accesses\n");
#endif
#if CONFIG_NIC3COM == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NIC3COM].name);
print_supported_pcidevs(nics_3com);
#endif
#if CONFIG_NICREALTEK == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICREALTEK].name);
print_supported_pcidevs(nics_realtek);
#endif
#if CONFIG_NICNATSEMI == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICNATSEMI].name);
print_supported_pcidevs(nics_natsemi);
#endif
#if CONFIG_GFXNVIDIA == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI/AGP devices for the %s programmer:\n",
programmer_table[PROGRAMMER_GFXNVIDIA].name);
print_supported_pcidevs(gfx_nvidia);
#endif
#if CONFIG_DRKAISER == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_DRKAISER].name);
print_supported_pcidevs(drkaiser_pcidev);
#endif
#if CONFIG_SATASII == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SATASII].name);
print_supported_pcidevs(satas_sii);
#endif
#if CONFIG_ATAHPT == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_ATAHPT].name);
print_supported_pcidevs(ata_hpt);
#endif
#if CONFIG_FT2232_SPI == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported USB devices for the %s programmer:\n",
programmer_table[PROGRAMMER_FT2232_SPI].name);
print_supported_usbdevs(devs_ft2232spi);
#endif
@@ -487,16 +502,17 @@
msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SERPROG].name);
/* FIXME */
- msg_ginfo("All programmer devices speaking the serprog protocol\n");
+// msg_ginfo("All programmer devices speaking the serprog protocol\n");
+ msg_ginfo("All programmer devices speaking the %s protocol\n",
programmer_table[PROGRAMMER_SERPROG].name);
#endif
#if CONFIG_BUSPIRATE_SPI == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported USB devices for the %s programmer:\n",
programmer_table[PROGRAMMER_BUSPIRATE_SPI].name);
/* FIXME */
msg_ginfo("Dangerous Prototypes Bus Pirate\n");
#endif
#if CONFIG_DEDIPROG == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported USB devices for the %s programmer:\n",
programmer_table[PROGRAMMER_DEDIPROG].name);
/* FIXME */
msg_ginfo("Dediprog SF100\n");
@@ -508,22 +524,22 @@
msg_ginfo("RayeR parallel port programmer\n");
#endif
#if CONFIG_NICINTEL == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICINTEL].name);
print_supported_pcidevs(nics_intel);
#endif
#if CONFIG_NICINTEL_SPI == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICINTEL_SPI].name);
print_supported_pcidevs(nics_intel_spi);
#endif
#if CONFIG_OGP_SPI == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_OGP_SPI].name);
print_supported_pcidevs(ogp_spi);
#endif
#if CONFIG_SATAMV == 1
- msg_ginfo("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported PCI devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SATAMV].name);
print_supported_pcidevs(satas_mv);
#endif
@@ -545,428 +561,427 @@
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_known[] = {
#if defined(__i386__) || defined(__x86_64__)
- B("A-Trend", "ATC-6220", 1,
"http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
- B("abit", "A-S78H", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
- B("abit", "AN-M2", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
- B("abit", "AV8", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
- B("abit", "AX8", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
- B("abit", "BM6", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
- B("abit", "Fatal1ty F-I90HD", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
- B("abit", "IC7", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
- B("abit", "IP35", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…",
NULL),
- B("abit", "IP35 Pro", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…",
NULL),
- B("abit", "IS-10", 0,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
"Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public
archive. Missing board enable and/or M50FW040 unlocking. May work
now."),
- B("abit", "KN8 Ultra", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
- B("abit", "NF-M2 nView", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…",
NULL),
- B("abit", "NF-M2S", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
- B("abit", "NF7-S", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…",
NULL),
- B("abit", "VA6", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…",
NULL),
- B("abit", "VT6X4", 1,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…",
NULL),
- B("Acorp", "6A815EPD", 1,
"http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…",
NULL),
- B("Advantech", "PCM-5820", 1,
"http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
- B("agami", "Aruma", 1,
"http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…",
NULL),
- B("Albatron", "PM266A Pro", 1,
"http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…",
NULL), /* FIXME */
- B("AOpen", "i945GMx-VFX", 1, NULL, "This is
(also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with
designation D2544-B1)."),
- B("AOpen", "vKM400Am-S", 1,
"http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
- B("Artec Group","DBE61", 1,
"http://wiki.thincan.org/DBE61", NULL),
- B("Artec Group","DBE62", 1,
"http://wiki.thincan.org/DBE62", NULL),
- B("ASI", "MB-5BLMP", 1,
"http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III
thin client."),
- B("ASRock", "775i65G", 1,
"http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
- B("ASRock", "890GX Extreme3", 1,
"http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
- B("ASRock", "939A785GMH/128M", 1,
"http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
- B("ASRock", "A330GC", 1,
"http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
- B("ASRock", "A770CrossFire", 1,
"http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
- B("ASRock", "ALiveNF6G-DVI", 1,
"http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
- B("ASRock", "AM2NF6G-VSTA", 1,
"http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
- B("ASRock", "ConRoeXFire-eSATA2", 1,
"http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2",
NULL),
- B("ASRock", "K7S41", 1,
"http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
- B("ASRock", "K7S41GX", 1,
"http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
- B("ASRock", "K7VT4A+", 0,
"http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip
found, probably due to flash translation.
http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
- B("ASRock", "K8S8X", 1,
"http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
- B("ASRock", "M3A790GXH/128M", 1,
"http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
- B("ASRock", "P4i65GV", 1,
"http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
- B("ASUS", "A7N8X Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
- B("ASUS", "A7N8X-E Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
- B("ASUS", "A7N8X-VM/400", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
- B("ASUS", "A7V133", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
- B("ASUS", "A7V333", 1,
"ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
- B("ASUS", "A7V400-MX", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
- B("ASUS", "A7V600-X", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
- B("ASUS", "A7V8X", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
- B("ASUS", "A7V8X-MX", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
- B("ASUS", "A7V8X-MX SE", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
- B("ASUS", "A7V8X-X", 1,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
- B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1,
"http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…",
"This is an OEM board from HP, the HP name is NodusM3-GL8E."),
- B("ASUS", "A8N-E", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
- B("ASUS", "A8N-LA (Nagami-GL8E)", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…",
"This is an OEM board from HP, the HP name is Nagami-GL8E."),
- B("ASUS", "A8N-SLI", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
- B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested
board enable."),
- B("ASUS", "A8N-SLI Premium", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/",
NULL),
- B("ASUS", "A8N-VM", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
- B("ASUS", "A8N-VM CSM", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
- B("ASUS", "A8NE-FM/S", 1,
"http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…",
NULL),
- B("ASUS", "A8V Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
- B("ASUS", "A8V-E Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
- B("ASUS", "A8V-E SE", 1,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See
http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
- B("ASUS", "Crosshair II Formula", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/",
NULL),
- B("ASUS", "Crosshair IV Extreme", 1,
"http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/",
NULL),
- B("ASUS", "E35M1-I DELUXE", 1,
"http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/",
NULL),
- B("ASUS", "K8N", 1,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
- B("ASUS", "K8V", 1,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
- B("ASUS", "K8V SE Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/",
NULL),
- B("ASUS", "K8V-X", 1,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
- B("ASUS", "K8V-X SE", 1,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
- B("ASUS", "KFSN4-DRE/SAS", 1,
"http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/",
NULL),
- B("ASUS", "M2A-MX", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
- B("ASUS", "M2A-VM (HDMI)", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
- B("ASUS", "M2N32-SLI Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/",
NULL),
- B("ASUS", "M2N-E", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine
doesn't come up again after flashing, try resetting the NVRAM(CMOS).
The MAC address of the onboard network card will change to the value
stored in the new image, so backup the old address first. See
http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
- B("ASUS", "M2N-E SLI", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
- B("ASUS", "M2N-SLI Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
- B("ASUS", "M2NBP-VM CSM", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
- B("ASUS", "M2NPV-VM", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
- B("ASUS", "M2V", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
- B("ASUS", "M2V-MX", 1,
"http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
- B("ASUS", "M3A", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
- B("ASUS", "M3A76-CM", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
- B("ASUS", "M3A78-EM", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
- B("ASUS", "M3N78-VM", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
- B("ASUS", "M4A78-EM", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
- B("ASUS", "M4A785TD-M EVO", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
- B("ASUS", "M4A785TD-V EVO", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
- B("ASUS", "M4A78LT-M LE", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
- B("ASUS", "M4A79T Deluxe", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
- B("ASUS", "M4A87TD/USB3", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
- B("ASUS", "M4A89GTD PRO", 1,
"http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
- B("ASUS", "M4N78 PRO", 1,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
- B("ASUS", "M5A99X EVO", 1,
"http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
- B("ASUS", "MEW-AM", 0,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work
now."),
- B("ASUS", "MEW-VM", 0,
"http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No
public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May
work now."),
- B("ASUS", "OPLX-M", 0, NULL, "Untested
board enable."),
- B("ASUS", "P2B", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
- B("ASUS", "P2B-D", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
- B("ASUS", "P2B-DS", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
- B("ASUS", "P2B-F", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
- B("ASUS", "P2B-N", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
- B("ASUS", "P2E-M", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
- B("ASUS", "P2L97-S", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
- B("ASUS", "P3B-F", 0,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work
now."),
- B("ASUS", "P4B266", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
- B("ASUS", "P4B266-LM", 1,
"http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
- B("ASUS", "P4B533-E", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
- B("ASUS", "P4C800-E Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/",
NULL),
- B("ASUS", "P4GV-LA (Guppy)", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…",
NULL),
- B("ASUS", "P4P800", 1,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
- B("ASUS", "P4P800-E Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/",
NULL),
- B("ASUS", "P4P800-VM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
- B("ASUS", "P4SC-E", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS
Terminator P4 533 barebone system"),
- B("ASUS", "P4SD-LA", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505",
NULL),
- B("ASUS", "P4S533-X", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
- B("ASUS", "P4S800-MX", 1,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
- B("ASUS", "P5A", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
- B("ASUS", "P5B", 1,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
- B("ASUS", "P5B-Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/",
NULL),
- B("ASUS", "P5BV-M", 0,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by
Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to
flashrom(a)coreboot.org, no public archive. Missing board enable and/or
SST49LF008A unlocking. May work now."),
- B("ASUS", "P5GC-MX/1333", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/",
NULL),
- B("ASUS", "P5GD1 Pro", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
- B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an
OEM board from FSC. Although flashrom supports it and can probably not
distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS
does not support the FSC variants completely."),
- B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested
board enable."),
- B("ASUS", "P5GD2 Premium", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/",
NULL),
- B("ASUS", "P5GDC Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/",
NULL),
- B("ASUS", "P5GDC-V Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/",
NULL),
- B("ASUS", "P5GD2/C variants", 0, NULL, "Untested
board enable."),
- B("ASUS", "P5K-V", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
- B("ASUS", "P5K-VM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
- B("ASUS", "P5KC", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
- B("ASUS", "P5KPL-CM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
- B("ASUS", "P5L-MX", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
- B("ASUS", "P5L-VM 1394", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/",
NULL),
- B("ASUS", "P5LD2", 0, NULL, "Untested
board enable."),
- B("ASUS", "P5LP-LE (Lithium-UL8E)", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…",
"This is an OEM board from HP."),
- B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an
OEM board from Epson (e.g. Endeavor MT7700)."),
- B("ASUS", "P5LP-LE", 0, NULL, "This
designation is used for OEM boards from HP, Epson and maybe others.
The HP names vary and not all of them have been tested yet. Please
report any success or failure, thanks."),
- B("ASUS", "P5N-E SLI", 0,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs
a board enable (http://patchwork.coreboot.org/patch/3298/)."),
- B("ASUS", "P5N-D", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
- B("ASUS", "P5N-E SLI", 0,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/",
"Untested board enable."),
- B("ASUS", "P5N32-E SLI", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/",
NULL),
- B("ASUS", "P5N7A-VM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
- B("ASUS", "P5ND2-SLI Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/",
NULL),
- B("ASUS", "P5PE-VM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
- B("ASUS", "P5QPL-AM", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
- B("ASUS", "P5VD1-X", 1,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
- B("ASUS", "P6T SE", 1,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
- B("ASUS", "P6T Deluxe", 1,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/",
NULL),
- B("ASUS", "P6T Deluxe V2", 1,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/",
NULL),
- B("ASUS", "P7H57D-V EVO", 1,
"http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/",
NULL),
- B("ASUS", "P7H55-M LX", 0, NULL, "flashrom
works correctly, but GbE LAN is nonworking (probably due to a
missing/bogus MAC address; see
http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and
http://ubuntuforums.org/showthread.php?t=1534389 for a possible
workaround)"),
- B("ASUS", "P8B-E/4L", 0, NULL, "Probing
works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8B WS", 0, NULL, "Probing
works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8H61 PRO", 0, NULL, "Probing
works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing
works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8H67-M PRO", 0, NULL, "Probing
works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing
works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing
works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ASUS", "Z8NA-D6C", 1,
"http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/",
NULL),
- B("ASUS", "Z8PE-D12", 1,
"http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/",
NULL),
- B("BCOM", "WinNET100", 1,
"http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin
client."),
- B("Bifferos", "Bifferboard", 1,
"http://bifferos.co.uk/", NULL),
- B("Biostar", "N68S3+", 1, NULL, NULL),
- B("Biostar", "M6TBA", 0,
"ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found.
Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("Biostar", "M7NCD Pro", 1,
"http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
- B("Biostar", "P4M80-M4", 1,
"http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
- B("Biostar", "TA780G M2+", 1,
"http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344",
NULL),
- B("Boser", "HS-6637", 0,
"http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by
Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public
archive. Missing board enable and/or F29C51002T unlocking. May work
now."),
- B("Congatec", "conga-X852", 1,
"http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
- B("Dell", "OptiPlex GX1", 1,
"http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm",
NULL),
- B("Dell", "PowerEdge 1850", 1,
"http://support.dell.com/support/edocs/systems/pe1850/en/index.htm",
NULL),
- B("DFI", "855GME-MGF", 0,
"http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…",
"Probably needs a board enable.
http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
- B("DFI", "Blood-Iron P35 T2RL", 1,
"http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…",
NULL),
- B("Elitegroup", "GeForce6100SM-M ", 1,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…",
NULL),
- B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…",
NULL),
- B("Elitegroup", "K7S5A", 1,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…",
NULL),
- B("Elitegroup", "K7S6A", 1,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…",
NULL),
- B("Elitegroup", "K7SEM (V1.0A)", 1,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…",
NULL),
- B("Elitegroup", "K7VTA3", 1,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…",
NULL),
- B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
- B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL),
- B("Elitegroup", "P6IWP-Fe", 1,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
- B("Elitegroup", "P6VAP-A+", 1,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…",
NULL),
- B("Elitegroup", "RS485M-M", 1,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
- B("Emerson", "ATCA-7360", 1,
"http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…",
NULL),
- B("EPoX", "EP-8K5A2", 1,
"http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
- B("EPoX", "EP-8NPA7I", 1,
"http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
- B("EPoX", "EP-9NPA7I", 1,
"http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
- B("EPoX", "EP-8RDA3+", 1,
"http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
- B("EPoX", "EP-BX3", 1,
"http://www.epox.com/product.asp?ID=EP-BX3", NULL),
- B("EVGA", "132-CK-NF78", 1,
"http://www.evga.com/articles/385.asp", NULL),
- B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1,
"http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
- B("FIC", "VA-502", 0,
"ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI
subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
- B("Foxconn", "6150K8MD-8EKRSH", 1,
"http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…",
NULL),
- B("Foxconn", "A6VMX", 1,
"http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…",
NULL),
- B("Foxconn", "P4M800P7MA-RS2", 1,
"http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…",
NULL),
- B("Freetech", "P6F91i", 1,
"http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…",
NULL),
- B("Fujitsu-Siemens", "ESPRIMO P5915", 1,
"http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…",
"Mainboard model is D2312-A2."),
- B("GIGABYTE", "GA-2761GXDK", 1,
"http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…",
NULL),
- B("GIGABYTE", "GA-6BXC", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
- B("GIGABYTE", "GA-6BXDU", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
- B("GIGABYTE", "GA-6IEM", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
- B("GIGABYTE", "GA-6VXE7+", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
- B("GIGABYTE", "GA-6ZMA", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
- B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
- B("GIGABYTE", "GA-770TA-UD3", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
- B("GIGABYTE", "GA-7DXR", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
- B("GIGABYTE", "GA-7VT600", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
- B("GIGABYTE", "GA-7ZM", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works
fine if you remove jumper JP9 on the board and disable the flash
protection BIOS option."),
- B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
- B("GIGABYTE", "GA-8I945GZME-RH", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
- B("GIGABYTE", "GA-8IP775", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
- B("GIGABYTE", "GA-8IRML", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
- B("GIGABYTE", "GA-8PE667 Ultra 2", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
- B("GIGABYTE", "GA-8SIMLH", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
- B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
- B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
- B("GIGABYTE", "GA-965P-DS4", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
- B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
- B("GIGABYTE", "GA-EP35-DS3L", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
- B("GIGABYTE", "GA-EX58-UD4P", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
- B("GIGABYTE", "GA-K8N-SLI", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
- B("GIGABYTE", "GA-K8N51GMF", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
- B("GIGABYTE", "GA-K8N51GMF-9", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
- B("GIGABYTE", "GA-K8NS Pro-939", 0,
"http://www.gigabyte.com/products/product-page.aspx?pid=1875",
"Untested board enable."),
- B("GIGABYTE", "GA-M57SLI-S4", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
- B("GIGABYTE", "GA-M61P-S3", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
- B("GIGABYTE", "GA-M720-US3", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
- B("GIGABYTE", "GA-MA69VM-S2", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
- B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
- B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
- B("GIGABYTE", "GA-MA770T-UD3P", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
- B("GIGABYTE", "GA-MA780G-UD3H", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
- B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
- B("GIGABYTE", "GA-MA78GM-S2H", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL),
/* TODO: Rev. 1.0, 1.1, or 2.x? */
- B("GIGABYTE", "GA-MA78GPM-DS2H", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
- B("GIGABYTE", "GA-MA790FX-DQ6", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
- B("GIGABYTE", "GA-MA790GP-DS4H", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
- B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
- B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
- B("GIGABYTE", "GA-P67A-UD3P", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
- B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL),
- B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL),
- B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
- B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1,
"http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
- B("HP", "e-Vectra P2706T", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…",
NULL),
- B("HP", "ProLiant DL145 G3", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…",
NULL),
- B("HP", "ProLiant DL165 G6", 1,
"http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…",
NULL),
- B("HP", "ProLiant N40L", 1, NULL, NULL),
- B("HP", "Puffer2-UL8E", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023",
NULL),
- B("HP", "dc7800", 0,
"http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…",
"ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor,
locked ME region."),
- B("HP", "Vectra VL400", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…",
NULL),
- B("HP", "Vectra VL420 SFF", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…",
NULL),
- B("HP", "xw4400 (0A68h)", 0,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…",
"ICH7 with SPI lock down, BIOS lock, flash block detection
(SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
- B("HP", "xw9400", 1,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…",
"Boot block is write protected unless the solder points next to F2 are
shorted."),
- B("IBASE", "MB899", 1,
"http://www.ibase-i.com.tw/2009/mb899.html", NULL),
- B("IBM", "x3455", 1,
"http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html",
NULL),
- B("IEI", "PICOe-9452", 1,
"http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…",
NULL),
- B("Intel", "D201GLY", 1,
"http://www.intel.com/support/motherboards/desktop/d201gly/index.htm",
NULL),
- B("Intel", "D425KT", 0,
"http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…",
"NM10 with SPI lock down, BIOS lock, see
http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
- B("Intel", "D865GLC", 0, NULL, "ICH5 with
BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
- B("Intel", "DG45ID", 0,
"http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…",
"Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME is
locked."),
- B("Intel", "DH67CF", 0, NULL, "H67 with
BIOS lock enable and locked ME region, see
http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
- B("Intel", "EP80759", 1, NULL, NULL),
- B("Intel", "Foxhollow", 1, NULL, "Intel
reference board."),
- B("Intel", "Greencity", 1, NULL, "Intel
reference board."),
- B("Intel", "SE440BX-2", 0,
"http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…",
"Probably won't work, see
http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
- B("IWILL", "DK8-HTX", 1,
"http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…",
NULL),
- B("Jetway", "J-7BXAN", 1,
"http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
- B("Jetway", "J7F4K1G5D-PB", 1,
"http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…",
NULL),
- B("Kontron", "986LCD-M", 1,
"http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…",
NULL),
- B("Lanner", "EM-8510C", 1, NULL, NULL),
- B("Lex", "CV700A", 1,
"http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
- B("Mitac", "6513WU", 1,
"http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…",
NULL),
- B("MSC", "Q7-TCTC", 1,
"http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html",
NULL),
- B("MSI", "MS-6153", 1,
"http://www.msi.com/product/mb/MS-6153.html", NULL),
- B("MSI", "MS-6156", 1,
"http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…",
NULL),
- B("MSI", "MS-6163 (MS-6163 Pro)",1,
"http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
- B("MSI", "MS-6178", 0,
"http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off
if you try to hot-plug the chip. However, this does '''not''' happen
if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
- B("MSI", "MS-6330 (K7T Turbo)", 1,
"http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
- B("MSI", "MS-6391 (845 Pro4)", 1,
"http://www.msi.com/product/mb/845-Pro4.html", NULL),
- B("MSI", "MS-6561 (745 Ultra)", 1,
"http://www.msi.com/product/mb/745-Ultra.html", NULL),
- B("MSI", "MS-6566 (845 Ultra-C)",1,
"http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
- B("MSI", "MS-6570 (K7N2)", 1,
"http://www.msi.com/product/mb/K7N2.html", NULL),
- B("MSI", "MS-6577 (Xenon)", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…",
"This is an OEM board from HP, the HP name is Xenon."),
- B("MSI", "MS-6590 (KT4 Ultra)", 1,
"http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
- B("MSI", "MS-6702E (K8T Neo2-F)",1,
"http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
- B("MSI", "MS-6712 (KT4V)", 1,
"http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
- B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 1,
"http://www.msi.com/service/search/?kw=6787&type=product", NULL),
- B("MSI", "MS-7005 (651M-L)", 1,
"http://www.msi.com/product/mb/651M-L.html", NULL),
- B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1,
"http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
- B("MSI", "MS-7046", 1,
"http://www.heimir.de/ms7046/", NULL),
- B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1,
"http://www.msi.com/service/search/?kw=7061&type=product", NULL),
- B("MSI", "MS-7065", 1,
"http://browse.geekbench.ca/geekbench2/view/53114", NULL),
- B("MSI", "MS-7135 (K8N Neo3)", 1,
"http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
- B("MSI", "MS-7142 (K8MM-V)", 1,
"http://www.msi.com/product/mb/K8MM-V.html", NULL),
- B("MSI", "MS-7168 (Orion)", 1,
"http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…",
NULL),
- B("MSI", "MS-7207 (K8NGM2-L)", 1,
"http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
- B("MSI", "MS-7211 (PM8M3-V)", 1,
"http://www.msi.com/product/mb/PM8M3-V.html", NULL),
- B("MSI", "MS-7236 (945PL Neo3)", 1,
"http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
- B("MSI", "MS-7253 (K9VGM-V)", 1,
"http://www.msi.com/product/mb/K9VGM-V.html", NULL),
- B("MSI", "MS-7255 (P4M890M)", 1,
"http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
- B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0,
"http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly
flashrom does not work when the vendor BIOS is booted, but it ''does''
work flawlessly when the machine is booted with coreboot. Owned by Uwe
Hermann <uwe(a)hermann-uwe.de>."),
- B("MSI", "MS-7309 (K9N6PGM2-V2)", 1,
"http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
- B("MSI", "MS-7312 (K9MM-V)", 1,
"http://www.msi.com/product/mb/K9MM-V.html", NULL),
- B("MSI", "MS-7345 (P35 Neo2-FIR)", 1,
"http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
- B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1,
"http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
- B("MSI", "MS-7369 (K9N Neo V2)", 1,
"http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
- B("MSI", "MS-7376 (K9A2 Platinum V1)", 1,
"http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
- B("MSI", "MS-7529 (G31M3-L(S) V2)", 1,
"http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
- B("MSI", "MS-7529 (G31TM-P21)", 1,
"http://www.msi.com/product/mb/G31TM-P21.html", NULL),
- B("MSI", "MS-7548 (Aspen-GL8E)", 1,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…",
NULL),
- B("MSI", "MS-7596 (785GM-E51)", 1,
"http://www.msi.com/product/mb/785GM-E51.html", NULL),
- B("MSI", "MS-7599 (870-C45)", 1,
"http://www.msi.com/product/mb/870-C45.html", NULL),
- B("MSI", "MS-7613 (Iona-GL8E)", 0,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
- B("MSI", "MS-7635 (H55M-ED55)", 0,
"http://www.msi.com/product/mb/H55M-ED55.html", "Probing works
(Winbond W25Q64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("MSI", "MS-7640 (890FXA-GD70)",1,
"http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
- B("MSI", "MS-7642 (890GXM-G65)", 1,
"http://www.msi.com/product/mb/890GXM-G65.html", NULL),
- B("MSI", "MS-7676 (H67MA-ED55(B3))", 1,
"http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work
fine basically, but user reported (hopefully unrelated) buggy behavior
of the board after a firmware upgrade. See
http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
- B("MSI", "MS-7696 (A75MA-G55)", 1,
"http://www.msi.com/product/mb/A75MA-G55.html", NULL),
- B("MSI", "MS-7698 (E350IA-E45)", 1,
"http://www.msi.com/product/mb/E350IA-E45.html", NULL),
- B("NEC", "PowerMate 2000", 1,
"http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/",
NULL),
- B("Nokia", "IP530", 1, NULL, NULL),
- B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL),
- B("PCCHIPS ", "M863G (V5.1A)", 1,
"http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…",
NULL),
- B("PC Engines", "Alix.1c", 1,
"http://pcengines.ch/alix1c.htm", NULL),
- B("PC Engines", "Alix.2c2", 1,
"http://pcengines.ch/alix2c2.htm", NULL),
- B("PC Engines", "Alix.2c3", 1,
"http://pcengines.ch/alix2c3.htm", NULL),
- B("PC Engines", "Alix.2d3", 1,
"http://pcengines.ch/alix2d3.htm", NULL),
- B("PC Engines", "Alix.3c3", 1,
"http://pcengines.ch/alix3c3.htm", NULL),
- B("PC Engines", "Alix.3d3", 1,
"http://pcengines.ch/alix3d3.htm", NULL),
- B("PC Engines", "Alix.6f2", 1,
"http://pcengines.ch/alix6f2.htm", NULL),
- B("PC Engines", "WRAP.2E", 1,
"http://pcengines.ch/wrap2e1.htm", NULL),
- B("Portwell", "PEB-4700VLA", 1,
"http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA",
NULL),
- B("RCA", "RM4100", 1,
"http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
- B("Samsung", "Polaris 32", 1, NULL, NULL),
- B("Shuttle", "AK31", 1,
"http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
- B("Shuttle", "AK38N", 1,
"http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/",
NULL),
- B("Shuttle", "AV11V30", 1, NULL, NULL),
- B("Shuttle", "AV18E2", 1,
"http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
- B("Shuttle", "FD37", 1,
"http://www.shuttle.eu/products/discontinued/barebones/sd37p2/",
NULL),
- B("Shuttle", "FH67", 1,
"http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
- B("Shuttle", "FN25", 1,
"http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=",
NULL),
- B("Shuttle", "X50/X50(B)", 1,
"http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
- B("Soyo", "SY-5VD", 0,
"http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No
public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May
work now."),
- B("Soyo", "SY-6BA+ III", 1,
"http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
- B("Soyo", "SY-7VCA", 1,
"http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html",
NULL),
- B("Sun", "Blade x6250", 1,
"http://www.sun.com/servers/blades/x6250/", NULL),
- B("Sun", "Fire x4150", 0,
"http://www.sun.com/servers/x64/x4150/", "No public report found. May
work now."),
- B("Sun", "Fire x4200", 0,
"http://www.sun.com/servers/entry/x4200/", "No public report found.
May work now."),
- B("Sun", "Fire x4540", 0,
"http://www.sun.com/servers/x64/x4540/", "No public report found. May
work now."),
- B("Sun", "Fire x4600", 0,
"http://www.sun.com/servers/x64/x4600/", "No public report found. May
work now."),
- B("Sun", "Ultra 40 M2", 1,
"http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…",
NULL),
- B("Supermicro", "H8QC8", 1,
"http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm",
NULL),
- B("Supermicro", "X5DP8-G2", 1,
"http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm",
NULL),
- B("Supermicro", "X7DBT-INF", 1,
"http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm",
NULL),
- B("Supermicro", "X7SPA-HF", 1,
"http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…",
NULL),
- B("Supermicro", "X8DT3", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm",
NULL),
- B("Supermicro", "X8DTE-F", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…",
NULL),
- B("Supermicro", "X8DTH-6F", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm",
NULL),
- B("Supermicro", "X8DTT-F", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm",
NULL),
- B("Supermicro", "X8DTT-HIBQF", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm",
NULL),
- B("Supermicro", "X8DTU-6TF+", 0,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…",
"Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
- B("Supermicro", "X8DTU-F", 1,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm",
NULL),
- B("Supermicro", "X8SIE(-F)", 0,
"http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…",
"Requires unlocking the ME although the registers are set up correctly
by the descriptor/BIOS already (tested with swseq and hwseq)."),
- B("Supermicro", "X8STi", 1,
"http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm",
NULL),
- B("Supermicro", "X9SCA-F", 0,
"http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
- B("Supermicro", "X9SCL", 0,
"http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
- B("T-Online", "S-100", 1,
"http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
- B("Tekram", "P6Pro-A5", 1,
"http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
- B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL),
- B("Thomson", "IP1000", 1,
"http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
- B("TriGem", "Anaheim-3", 1,
"http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml",
NULL),
- B("TriGem", "Lomita", 1,
"http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml",
NULL),
- B("Tyan", "S5375-1U (Tempest i5100X)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
- B("Tyan", "S1846 (Tsunami ATX)", 1,
"http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
- B("Tyan", "S2466 (Tiger MPX)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
- B("Tyan", "S2498 (Tomcat K7M)", 1,
"http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
- B("Tyan", "S2723 (Tiger i7501)", 1,
"http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
- B("Tyan", "S2881 (Thunder K8SR)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
- B("Tyan", "S2882 (Thunder K8S Pro)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
- B("Tyan", "S2882-D (Thunder K8SD Pro)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
- B("Tyan", "S2891 (Thunder K8SRE)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
- B("Tyan", "S2892 (Thunder K8SE)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
- B("Tyan", "S2895 (Thunder K8WE)", 1,
"http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
- B("Tyan", "S2912 (Thunder n3600R)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
- B("Tyan", "S2915 (Thunder n6650W)", 1,
"http://tyan.com/product_board_detail.aspx?pid=163", NULL),
- B("Tyan", "S2915-E (Thunder n6650W)", 1,
"http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041",
NULL),
- B("Tyan", "S2933 (Thunder n3600S)", 1,
"http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063",
NULL),
- B("Tyan", "S3095 (Tomcat i945GM)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
- B("Tyan", "S3992 (Thunder h2000M)", 1,
"http://tyan.com/product_board_detail.aspx?pid=235", NULL),
- B("Tyan", "S5180 (Toledo i965R)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
- B("Tyan", "S5191 (Toledo i3000R)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
- B("Tyan", "S5197 (Toledo i3010W)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
- B("Tyan", "S5211 (Toledo i3210W)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
- B("Tyan", "S5211-1U (Toledo i3200R)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
- B("Tyan", "S5220 (Toledo q35T)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
- B("Tyan", "S5375 (Tempest i5100X)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
- B("Tyan", "S5376 (Tempest i5100W)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=605", "Both
S5376G2NR and S5376WAG2NR should work."),
- B("Tyan", "S5377 (Tempest i5100T)", 1,
"http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…",
NULL),
- B("Tyan", "S5382 (Tempest i5000PW)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
- B("Tyan", "S5397 (Tempest i5400PW)", 1,
"http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
- B("VIA", "EPIA M/MII/...", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL), /* EPIA-MII link for now */
- B("VIA", "EPIA SP", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
- B("VIA", "EPIA-CN", 1,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
- B("VIA", "EPIA EK", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…",
NULL),
- B("VIA", "EPIA-EX15000G", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
- B("VIA", "EPIA-LN", 1,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
- B("VIA", "EPIA-M700", 1,
"http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…",
NULL),
- B("VIA", "EPIA-N/NL", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL), /* EPIA-N link for now */
- B("VIA", "EPIA-NX15000G", 1,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
- B("VIA", "NAB74X0", 1,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
- B("VIA", "pc2500e", 1,
"http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp",
NULL),
- B("VIA", "PC3500G", 1,
"http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp",
NULL),
- B("VIA", "VB700X", 1,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
- B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL),
- B("ZOTAC", "GeForce 8200", 1,
"http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…",
NULL),
- B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing
works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
- B("ZOTAC", "ZBOX HD-ID11", 1,
"http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…",
NULL),
+ B("A-Trend", "ATC-6220", OK,
"http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
+ B("abit", "A-S78H", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
+ B("abit", "AN-M2", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
+ B("abit", "AV8", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
+ B("abit", "AX8", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
+ B("abit", "BM6", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
+ B("abit", "Fatal1ty F-I90HD", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
+ B("abit", "IC7", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
+ B("abit", "IP35", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…",
NULL),
+ B("abit", "IP35 Pro", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…",
NULL),
+ B("abit", "IS-10", BAD,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
"Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public
archive. Missing board enable and/or M50FW040 unlocking. May work
now."),
+ B("abit", "KN8 Ultra", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…",
NULL),
+ B("abit", "NF-M2 nView", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…",
NULL),
+ B("abit", "NF-M2S", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…",
NULL),
+ B("abit", "NF7-S", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…",
NULL),
+ B("abit", "VA6", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…",
NULL),
+ B("abit", "VT6X4", OK,
"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…",
NULL),
+ B("Acorp", "6A815EPD", OK,
"http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…",
NULL),
+ B("Advantech", "PCM-5820", OK,
"http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
+ B("agami", "Aruma", OK,
"http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…",
NULL),
+ B("Albatron", "PM266A Pro", OK,
"http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…",
NULL), /* FIXME */
+ B("AOpen", "i945GMx-VFX", OK,
NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO
Q5010 with designation D2544-B1)."),
+ B("AOpen", "vKM400Am-S", OK,
"http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
+ B("Artec Group","DBE61", OK,
"http://wiki.thincan.org/DBE61", NULL),
+ B("Artec Group","DBE62", OK,
"http://wiki.thincan.org/DBE62", NULL),
+ B("ASI", "MB-5BLMP", OK,
"http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III
thin client."),
+ B("ASRock", "775i65G", OK,
"http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
+ B("ASRock", "890GX Extreme3", OK,
"http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3",
NULL),
+ B("ASRock", "939A785GMH/128M", OK,
"http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
+ B("ASRock", "A330GC", OK,
"http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
+ B("ASRock", "A770CrossFire", OK,
"http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
+ B("ASRock", "ALiveNF6G-DVI", OK,
"http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
+ B("ASRock", "AM2NF6G-VSTA", OK,
"http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
+ B("ASRock", "ConRoeXFire-eSATA2", OK,
"http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2",
NULL),
+ B("ASRock", "K7S41", OK,
"http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
+ B("ASRock", "K7S41GX", OK,
"http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
+ B("ASRock", "K7VT4A+", BAD,
"http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip
found, probably due to flash translation.
http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
+ B("ASRock", "K8S8X", OK,
"http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
+ B("ASRock", "M3A790GXH/128M", OK,
"http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
+ B("ASRock", "P4i65GV", OK,
"http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
+ B("ASUS", "A7N8X Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
+ B("ASUS", "A7N8X-E Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/",
NULL),
+ B("ASUS", "A7N8X-VM/400", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
+ B("ASUS", "A7V133", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
+ B("ASUS", "A7V333", OK,
"ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
+ B("ASUS", "A7V400-MX", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
+ B("ASUS", "A7V600-X", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
+ B("ASUS", "A7V8X", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
+ B("ASUS", "A7V8X-MX", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
+ B("ASUS", "A7V8X-MX SE", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
+ B("ASUS", "A7V8X-X", OK,
"http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
+ B("ASUS", "A8M2N-LA (NodusM3-GL8E)", OK,
"http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…",
"This is an OEM board from HP, the HP name is NodusM3-GL8E."),
+ B("ASUS", "A8N-E", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
+ B("ASUS", "A8N-LA (Nagami-GL8E)", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…",
"This is an OEM board from HP, the HP name is Nagami-GL8E."),
+ B("ASUS", "A8N-SLI", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
+ B("ASUS", "A8N-SLI Deluxe", NT,
NULL, "Untested board enable."),
+ B("ASUS", "A8N-SLI Premium", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/",
NULL),
+ B("ASUS", "A8N-VM", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
+ B("ASUS", "A8N-VM CSM", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
+ B("ASUS", "A8NE-FM/S", OK,
"http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…",
NULL),
+ B("ASUS", "A8V Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
+ B("ASUS", "A8V-E Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/",
NULL),
+ B("ASUS", "A8V-E SE", OK,
"http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See
http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
+ B("ASUS", "Crosshair II Formula", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/",
NULL),
+ B("ASUS", "Crosshair IV Extreme", OK,
"http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/",
NULL),
+ B("ASUS", "E35M1-I DELUXE", OK,
"http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/",
NULL),
+ B("ASUS", "K8N", OK,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
+ B("ASUS", "K8V", OK,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
+ B("ASUS", "K8V SE Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/",
NULL),
+ B("ASUS", "K8V-X", OK,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
+ B("ASUS", "K8V-X SE", OK,
"http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
+ B("ASUS", "KFSN4-DRE/SAS", OK,
"http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/",
NULL),
+ B("ASUS", "M2A-MX", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
+ B("ASUS", "M2A-VM (HDMI)", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
+ B("ASUS", "M2N32-SLI Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/",
NULL),
+ B("ASUS", "M2N-E", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine
doesn't come up again after flashing, try resetting the NVRAM(CMOS).
The MAC address of the onboard network card will change to the value
stored in the new image, so backup the old address first. See
http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
+ B("ASUS", "M2N-E SLI", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
+ B("ASUS", "M2N-SLI Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
+ B("ASUS", "M2NBP-VM CSM", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
+ B("ASUS", "M2NPV-VM", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
+ B("ASUS", "M2V", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
+ B("ASUS", "M2V-MX", OK,
"http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
+ B("ASUS", "M3A", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
+ B("ASUS", "M3A76-CM", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
+ B("ASUS", "M3A78-EM", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
+ B("ASUS", "M3N78-VM", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
+ B("ASUS", "M4A78-EM", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
+ B("ASUS", "M4A785TD-M EVO", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
+ B("ASUS", "M4A785TD-V EVO", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
+ B("ASUS", "M4A78LT-M LE", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
+ B("ASUS", "M4A79T Deluxe", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
+ B("ASUS", "M4A87TD/USB3", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
+ B("ASUS", "M4A89GTD PRO", OK,
"http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
+ B("ASUS", "M4N78 PRO", OK,
"http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
+ B("ASUS", "M5A99X EVO", OK,
"http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
+ B("ASUS", "MEW-AM", BAD,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work
now."),
+ B("ASUS", "MEW-VM", BAD,
"http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No
public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May
work now."),
+ B("ASUS", "OPLX-M", NT,
NULL, "Untested board enable."),
+ B("ASUS", "P2B", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
+ B("ASUS", "P2B-D", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
+ B("ASUS", "P2B-DS", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
+ B("ASUS", "P2B-F", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
+ B("ASUS", "P2B-N", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
+ B("ASUS", "P2E-M", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
+ B("ASUS", "P2L97-S", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
+ B("ASUS", "P3B-F", BAD,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work
now."),
+ B("ASUS", "P4B266", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
+ B("ASUS", "P4B266-LM", OK,
"http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
+ B("ASUS", "P4B533-E", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
+ B("ASUS", "P4C800-E Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/",
NULL),
+ B("ASUS", "P4GV-LA (Guppy)", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…",
NULL),
+ B("ASUS", "P4P800", OK,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
+ B("ASUS", "P4P800-E Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/",
NULL),
+ B("ASUS", "P4P800-VM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
+ B("ASUS", "P4SC-E", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS
Terminator P4 533 barebone system"),
+ B("ASUS", "P4SD-LA", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505",
NULL),
+ B("ASUS", "P4S533-X", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
+ B("ASUS", "P4S800-MX", OK,
"http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
+ B("ASUS", "P5A", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
+ B("ASUS", "P5B", OK,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
+ B("ASUS", "P5B-Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/",
NULL),
+ B("ASUS", "P5BV-M", BAD,
"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by
Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to
flashrom(a)coreboot.org, no public archive. Missing board enable and/or
SST49LF008A unlocking. May work now."),
+ B("ASUS", "P5GC-MX/1333", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/",
NULL),
+ B("ASUS", "P5GD1 Pro", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/",
NULL),
+ B("ASUS", "P5GD1-VM/S", OK,
NULL, "This is an OEM board from FSC. Although flashrom supports it
and can probably not distinguish it from the P5GD1-VM, please note
that the P5GD1-VM BIOS does not support the FSC variants
completely."),
+ B("ASUS", "P5GD1(-VM)", NT,
NULL, "Untested board enable."),
+ B("ASUS", "P5GD2 Premium", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/",
NULL),
+ B("ASUS", "P5GDC Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/",
NULL),
+ B("ASUS", "P5GDC-V Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/",
NULL),
+ B("ASUS", "P5GD2/C variants", NT,
NULL, "Untested board enable."),
+ B("ASUS", "P5K-V", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
+ B("ASUS", "P5K-VM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
+ B("ASUS", "P5KC", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
+ B("ASUS", "P5KPL-CM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
+ B("ASUS", "P5L-MX", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
+ B("ASUS", "P5L-VM 1394", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/",
NULL),
+ B("ASUS", "P5LD2", NT,
NULL, "Untested board enable."),
+ B("ASUS", "P5LP-LE (Lithium-UL8E)", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…",
"This is an OEM board from HP."),
+ B("ASUS", "P5LP-LE (Epson OEM)", OK,
NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
+ B("ASUS", "P5LP-LE", BAD,
NULL, "This designation is used for OEM boards from HP, Epson and
maybe others. The HP names vary and not all of them have been tested
yet. Please report any success or failure, thanks."),
+ B("ASUS", "P5N-D", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
+ B("ASUS", "P5N-E SLI", NT,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/",
"Untested board enable."),
+ B("ASUS", "P5N32-E SLI", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/",
NULL),
+ B("ASUS", "P5N7A-VM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
+ B("ASUS", "P5ND2-SLI Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/",
NULL),
+ B("ASUS", "P5PE-VM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
+ B("ASUS", "P5QPL-AM", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
+ B("ASUS", "P5VD1-X", OK,
"http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
+ B("ASUS", "P6T SE", OK,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
+ B("ASUS", "P6T Deluxe", OK,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/",
NULL),
+ B("ASUS", "P6T Deluxe V2", OK,
"http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/",
NULL),
+ B("ASUS", "P7H57D-V EVO", OK,
"http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/",
NULL),
+ B("ASUS", "P7H55-M LX", BAD,
NULL, "flashrom works correctly, but GbE LAN is nonworking (probably
due to a missing/bogus MAC address; see
http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and
http://ubuntuforums.org/showthread.php?t=1534389 for a possible
workaround)"),
+ B("ASUS", "P8B-E/4L", BAD,
NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ASUS", "P8B WS", BAD,
NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ASUS", "P8H61 PRO", BAD,
NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ASUS", "P8H61-M LE/USB3", BAD,
NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ASUS", "P8H67-M PRO", BAD,
NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of
the flash are problematic: descriptor is r/o (conforming to ICH reqs),
ME region is locked."),
+ B("ASUS", "P8P67 (rev. 3.1)", BAD,
NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of
the flash are problematic: descriptor is r/o (conforming to ICH reqs),
ME region is locked."),
+ B("ASUS", "P8Z68-V PRO", BAD,
NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ASUS", "Z8NA-D6C", OK,
"http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/",
NULL),
+ B("ASUS", "Z8PE-D12", OK,
"http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/",
NULL),
+ B("BCOM", "WinNET100", OK,
"http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin
client."),
+ B("Bifferos", "Bifferboard", OK,
"http://bifferos.co.uk/", NULL),
+ B("Biostar", "N68S3+", OK,
NULL, NULL),
+ B("Biostar", "M6TBA", BAD,
"ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found.
Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("Biostar", "M7NCD Pro", OK,
"http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
+ B("Biostar", "P4M80-M4", OK,
"http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
+ B("Biostar", "TA780G M2+", OK,
"http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344",
NULL),
+ B("Boser", "HS-6637", BAD,
"http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by
Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public
archive. Missing board enable and/or F29C51002T unlocking. May work
now."),
+ B("Congatec", "conga-X852", OK,
"http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
+ B("Dell", "OptiPlex GX1", OK,
"http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm",
NULL),
+ B("Dell", "PowerEdge 1850", OK,
"http://support.dell.com/support/edocs/systems/pe1850/en/index.htm",
NULL),
+ B("DFI", "855GME-MGF", BAD,
"http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…",
"Probably needs a board enable.
http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
+ B("DFI", "Blood-Iron P35 T2RL", OK,
"http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…",
NULL),
+ B("Elitegroup", "GeForce6100SM-M ", OK,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…",
NULL),
+ B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…",
NULL),
+ B("Elitegroup", "K7S5A", OK,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…",
NULL),
+ B("Elitegroup", "K7S6A", OK,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…",
NULL),
+ B("Elitegroup", "K7SEM (V1.0A)", OK,
"http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…",
NULL),
+ B("Elitegroup", "K7VTA3", OK,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…",
NULL),
+ B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
+ B("Elitegroup", "P4VXMS (V1.0A)", OK,
NULL, NULL),
+ B("Elitegroup", "P6IWP-Fe", OK,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
+ B("Elitegroup", "P6VAP-A+", OK,
"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…",
NULL),
+ B("Elitegroup", "RS485M-M", OK,
"http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…",
NULL),
+ B("Emerson", "ATCA-7360", OK,
"http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…",
NULL),
+ B("EPoX", "EP-8K5A2", OK,
"http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
+ B("EPoX", "EP-8NPA7I", OK,
"http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
+ B("EPoX", "EP-9NPA7I", OK,
"http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
+ B("EPoX", "EP-8RDA3+", OK,
"http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
+ B("EPoX", "EP-BX3", OK,
"http://www.epox.com/product.asp?ID=EP-BX3", NULL),
+ B("EVGA", "132-CK-NF78", OK,
"http://www.evga.com/articles/385.asp", NULL),
+ B("EVGA", "270-WS-W555-A2 (Classified SR-2)", OK,
"http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
+ B("FIC", "VA-502", BAD,
"ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public
report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI
subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
+ B("Foxconn", "6150K8MD-8EKRSH", OK,
"http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…",
NULL),
+ B("Foxconn", "A6VMX", OK,
"http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…",
NULL),
+ B("Foxconn", "P4M800P7MA-RS2", OK,
"http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…",
NULL),
+ B("Freetech", "P6F91i", OK,
"http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…",
NULL),
+ B("Fujitsu-Siemens", "ESPRIMO P5915", OK,
"http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…",
"Mainboard model is D2312-A2."),
+ B("GIGABYTE", "GA-2761GXDK", OK,
"http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…",
NULL),
+ B("GIGABYTE", "GA-6BXC", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
+ B("GIGABYTE", "GA-6BXDU", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
+ B("GIGABYTE", "GA-6IEM", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
+ B("GIGABYTE", "GA-6VXE7+", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
+ B("GIGABYTE", "GA-6ZMA", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
+ B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
+ B("GIGABYTE", "GA-770TA-UD3", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
+ B("GIGABYTE", "GA-7DXR", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
+ B("GIGABYTE", "GA-7VT600", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
+ B("GIGABYTE", "GA-7ZM", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works
fine if you remove jumper JP9 on the board and disable the flash
protection BIOS option."),
+ B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
+ B("GIGABYTE", "GA-8I945GZME-RH", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
+ B("GIGABYTE", "GA-8IP775", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
+ B("GIGABYTE", "GA-8IRML", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
+ B("GIGABYTE", "GA-8PE667 Ultra 2", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
+ B("GIGABYTE", "GA-8SIMLH", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
+ B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
+ B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
+ B("GIGABYTE", "GA-965P-DS4", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
+ B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
+ B("GIGABYTE", "GA-EP35-DS3L", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
+ B("GIGABYTE", "GA-EX58-UD4P", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
+ B("GIGABYTE", "GA-K8N-SLI", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
+ B("GIGABYTE", "GA-K8N51GMF", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
+ B("GIGABYTE", "GA-K8N51GMF-9", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
+ B("GIGABYTE", "GA-K8NS Pro-939", NT,
"http://www.gigabyte.com/products/product-page.aspx?pid=1875",
"Untested board enable."),
+ B("GIGABYTE", "GA-M57SLI-S4", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
+ B("GIGABYTE", "GA-M61P-S3", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
+ B("GIGABYTE", "GA-M720-US3", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
+ B("GIGABYTE", "GA-MA69VM-S2", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
+ B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
+ B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
+ B("GIGABYTE", "GA-MA770T-UD3P", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
+ B("GIGABYTE", "GA-MA780G-UD3H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
+ B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
+ B("GIGABYTE", "GA-MA78GM-S2H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL),
/* TODO: Rev. 1.0, 1.1, or 2.x? */
+ B("GIGABYTE", "GA-MA78GPM-DS2H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
+ B("GIGABYTE", "GA-MA790FX-DQ6", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
+ B("GIGABYTE", "GA-MA790GP-DS4H", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
+ B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
+ B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
+ B("GIGABYTE", "GA-P67A-UD3P", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
+ B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK,
NULL, NULL),
+ B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", OK,
NULL, NULL),
+ B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
+ B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK,
"http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
+ B("HP", "e-Vectra P2706T", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…",
NULL),
+ B("HP", "ProLiant DL145 G3", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…",
NULL),
+ B("HP", "ProLiant DL165 G6", OK,
"http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…",
NULL),
+ B("HP", "ProLiant N40L", OK,
NULL, NULL),
+ B("HP", "Puffer2-UL8E", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023",
NULL),
+ B("HP", "dc7800", BAD,
"http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…",
"ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor,
locked ME region."),
+ B("HP", "Vectra VL400", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…",
NULL),
+ B("HP", "Vectra VL420 SFF", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…",
NULL),
+ B("HP", "xw4400 (0A68h)", BAD,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…",
"ICH7 with SPI lock down, BIOS lock, flash block detection
(SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
+ B("HP", "xw9400", OK,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…",
"Boot block is write protected unless the solder points next to F2 are
shorted."),
+ B("IBASE", "MB899", OK,
"http://www.ibase-i.com.tw/2009/mb899.html", NULL),
+ B("IBM", "x3455", OK,
"http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html",
NULL),
+ B("IEI", "PICOe-9452", OK,
"http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…",
NULL),
+ B("Intel", "D201GLY", OK,
"http://www.intel.com/support/motherboards/desktop/d201gly/index.htm",
NULL),
+ B("Intel", "D425KT", BAD,
"http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…",
"NM10 with SPI lock down, BIOS lock, see
http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
+ B("Intel", "D865GLC", BAD,
NULL, "ICH5 with BIOS lock enable, see
http://paste.flashrom.org/view.php?id=775"),
+ B("Intel", "DG45ID", BAD,
"http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…",
"Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME is
locked."),
+ B("Intel", "DH67CF", BAD,
NULL, "H67 with BIOS lock enable and locked ME region, see
http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
+ B("Intel", "EP80759", OK,
NULL, NULL),
+ B("Intel", "Foxhollow", OK,
NULL, "Intel reference board."),
+ B("Intel", "Greencity", OK,
NULL, "Intel reference board."),
+ B("Intel", "SE440BX-2", BAD,
"http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…",
"Probably won't work, see
http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
+ B("IWILL", "DK8-HTX", OK,
"http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…",
NULL),
+ B("Jetway", "J-7BXAN", OK,
"http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
+ B("Jetway", "J7F4K1G5D-PB", OK,
"http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…",
NULL),
+ B("Kontron", "986LCD-M", OK,
"http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…",
NULL),
+ B("Lanner", "EM-8510C", OK,
NULL, NULL),
+ B("Lex", "CV700A", OK,
"http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
+ B("Mitac", "6513WU", OK,
"http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…",
NULL),
+ B("MSC", "Q7-TCTC", OK,
"http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html",
NULL),
+ B("MSI", "MS-6153", OK,
"http://www.msi.com/product/mb/MS-6153.html", NULL),
+ B("MSI", "MS-6156", OK,
"http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…",
NULL),
+ B("MSI", "MS-6163 (MS-6163 Pro)", OK,
"http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
+ B("MSI", "MS-6178", BAD,
"http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off
if you try to hot-plug the chip. However, this does '''not''' happen
if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
+ B("MSI", "MS-6330 (K7T Turbo)", OK,
"http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
+ B("MSI", "MS-6391 (845 Pro4)", OK,
"http://www.msi.com/product/mb/845-Pro4.html", NULL),
+ B("MSI", "MS-6561 (745 Ultra)", OK,
"http://www.msi.com/product/mb/745-Ultra.html", NULL),
+ B("MSI", "MS-6566 (845 Ultra-C)", OK,
"http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
+ B("MSI", "MS-6570 (K7N2)", OK,
"http://www.msi.com/product/mb/K7N2.html", NULL),
+ B("MSI", "MS-6577 (Xenon)", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…",
"This is an OEM board from HP, the HP name is Xenon."),
+ B("MSI", "MS-6590 (KT4 Ultra)", OK,
"http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
+ B("MSI", "MS-6702E (K8T Neo2-F)", OK,
"http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
+ B("MSI", "MS-6712 (KT4V)", OK,
"http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
+ B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK,
"http://www.msi.com/service/search/?kw=6787&type=product", NULL),
+ B("MSI", "MS-7005 (651M-L)", OK,
"http://www.msi.com/product/mb/651M-L.html", NULL),
+ B("MSI", "MS-7025 (K8N Neo2 Platinum)", OK,
"http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
+ B("MSI", "MS-7046", OK,
"http://www.heimir.de/ms7046/", NULL),
+ B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK,
"http://www.msi.com/service/search/?kw=7061&type=product", NULL),
+ B("MSI", "MS-7065", OK,
"http://browse.geekbench.ca/geekbench2/view/53114", NULL),
+ B("MSI", "MS-7135 (K8N Neo3)", OK,
"http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
+ B("MSI", "MS-7142 (K8MM-V)", OK,
"http://www.msi.com/product/mb/K8MM-V.html", NULL),
+ B("MSI", "MS-7168 (Orion)", OK,
"http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…",
NULL),
+ B("MSI", "MS-7207 (K8NGM2-L)", OK,
"http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
+ B("MSI", "MS-7211 (PM8M3-V)", OK,
"http://www.msi.com/product/mb/PM8M3-V.html", NULL),
+ B("MSI", "MS-7236 (945PL Neo3)", OK,
"http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
+ B("MSI", "MS-7253 (K9VGM-V)", OK,
"http://www.msi.com/product/mb/K9VGM-V.html", NULL),
+ B("MSI", "MS-7255 (P4M890M)", OK,
"http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
+ B("MSI", "MS-7260 (K9N Neo PCB 1.0)", BAD,
"http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html",
"Interestingly flashrom does not work when the vendor BIOS is booted,
but it ''does'' work flawlessly when the machine is booted with
coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
+ B("MSI", "MS-7309 (K9N6PGM2-V2)", OK,
"http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
+ B("MSI", "MS-7312 (K9MM-V)", OK,
"http://www.msi.com/product/mb/K9MM-V.html", NULL),
+ B("MSI", "MS-7345 (P35 Neo2-FIR)", OK,
"http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
+ B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK,
"http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
+ B("MSI", "MS-7369 (K9N Neo V2)", OK,
"http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
+ B("MSI", "MS-7376 (K9A2 Platinum V1)", OK,
"http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
+ B("MSI", "MS-7529 (G31M3-L(S) V2)", OK,
"http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
+ B("MSI", "MS-7529 (G31TM-P21)", OK,
"http://www.msi.com/product/mb/G31TM-P21.html", NULL),
+ B("MSI", "MS-7548 (Aspen-GL8E)", OK,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…",
NULL),
+ B("MSI", "MS-7596 (785GM-E51)", OK,
"http://www.msi.com/product/mb/785GM-E51.html", NULL),
+ B("MSI", "MS-7599 (870-C45)", OK,
"http://www.msi.com/product/mb/870-C45.html", NULL),
+ B("MSI", "MS-7613 (Iona-GL8E)", BAD,
"http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
+ B("MSI", "MS-7635 (H55M-ED55)", BAD,
"http://www.msi.com/product/mb/H55M-ED55.html", "Probing works
(Winbond W25Q64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME region is
locked."),
+ B("MSI", "MS-7640 (890FXA-GD70)", OK,
"http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
+ B("MSI", "MS-7642 (890GXM-G65)", OK,
"http://www.msi.com/product/mb/890GXM-G65.html", NULL),
+ B("MSI", "MS-7676 (H67MA-ED55(B3))", OK,
"http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work
fine basically, but user reported (hopefully unrelated) buggy behavior
of the board after a firmware upgrade. See
http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
+ B("MSI", "MS-7696 (A75MA-G55)", OK,
"http://www.msi.com/product/mb/A75MA-G55.html", NULL),
+ B("MSI", "MS-7698 (E350IA-E45)", OK,
"http://www.msi.com/product/mb/E350IA-E45.html", NULL),
+ B("NEC", "PowerMate 2000", OK,
"http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/",
NULL),
+ B("Nokia", "IP530", OK,
NULL, NULL),
+ B("PCCHIPS ", "M598LMR (V9.0)", OK,
NULL, NULL),
+ B("PCCHIPS ", "M863G (V5.1A)", OK,
"http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…",
NULL),
+ B("PC Engines", "Alix.1c", OK,
"http://pcengines.ch/alix1c.htm", NULL),
+ B("PC Engines", "Alix.2c2", OK,
"http://pcengines.ch/alix2c2.htm", NULL),
+ B("PC Engines", "Alix.2c3", OK,
"http://pcengines.ch/alix2c3.htm", NULL),
+ B("PC Engines", "Alix.2d3", OK,
"http://pcengines.ch/alix2d3.htm", NULL),
+ B("PC Engines", "Alix.3c3", OK,
"http://pcengines.ch/alix3c3.htm", NULL),
+ B("PC Engines", "Alix.3d3", OK,
"http://pcengines.ch/alix3d3.htm", NULL),
+ B("PC Engines", "Alix.6f2", OK,
"http://pcengines.ch/alix6f2.htm", NULL),
+ B("PC Engines", "WRAP.2E", OK,
"http://pcengines.ch/wrap2e1.htm", NULL),
+ B("Portwell", "PEB-4700VLA", OK,
"http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA",
NULL),
+ B("RCA", "RM4100", OK,
"http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
+ B("Samsung", "Polaris 32", OK,
NULL, NULL),
+ B("Shuttle", "AK31", OK,
"http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
+ B("Shuttle", "AK38N", OK,
"http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/",
NULL),
+ B("Shuttle", "AV11V30", OK,
NULL, NULL),
+ B("Shuttle", "AV18E2", OK,
"http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
+ B("Shuttle", "FD37", OK,
"http://www.shuttle.eu/products/discontinued/barebones/sd37p2/",
NULL),
+ B("Shuttle", "FH67", OK,
"http://www.shuttle.eu/products/mini-pc/sh67h3/specification/",
NULL),
+ B("Shuttle", "FN25", OK,
"http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=",
NULL),
+ B("Shuttle", "X50/X50(B)", OK,
"http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
+ B("Soyo", "SY-5VD", BAD,
"http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English",
"No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>.
May work now."),
+ B("Soyo", "SY-6BA+ III", OK,
"http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
+ B("Soyo", "SY-7VCA", OK,
"http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html",
NULL),
+ B("Sun", "Blade x6250", OK,
"http://www.sun.com/servers/blades/x6250/", NULL),
+ B("Sun", "Fire x4150", BAD,
"http://www.sun.com/servers/x64/x4150/", "No public report found. May
work now."),
+ B("Sun", "Fire x4200", BAD,
"http://www.sun.com/servers/entry/x4200/", "No public report found.
May work now."),
+ B("Sun", "Fire x4540", BAD,
"http://www.sun.com/servers/x64/x4540/", "No public report found. May
work now."),
+ B("Sun", "Fire x4600", BAD,
"http://www.sun.com/servers/x64/x4600/", "No public report found. May
work now."),
+ B("Sun", "Ultra 40 M2", OK,
"http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…",
NULL),
+ B("Supermicro", "H8QC8", OK,
"http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm",
NULL),
+ B("Supermicro", "X5DP8-G2", OK,
"http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm",
NULL),
+ B("Supermicro", "X7DBT-INF", OK,
"http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm",
NULL),
+ B("Supermicro", "X7SPA-HF", OK,
"http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…",
NULL),
+ B("Supermicro", "X8DT3", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm",
NULL),
+ B("Supermicro", "X8DTE-F", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…",
NULL),
+ B("Supermicro", "X8DTH-6F", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm",
NULL),
+ B("Supermicro", "X8DTT-F", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm",
NULL),
+ B("Supermicro", "X8DTT-HIBQF", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm",
NULL),
+ B("Supermicro", "X8DTU-6TF+", BAD,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…",
"Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("Supermicro", "X8DTU-F", OK,
"http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm",
NULL),
+ B("Supermicro", "X8SIE(-F)", BAD,
"http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…",
"Requires unlocking the ME although the registers are set up correctly
by the descriptor/BIOS already (tested with swseq and hwseq)."),
+ B("Supermicro", "X8STi", OK,
"http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm",
NULL),
+ B("Supermicro", "X9SCA-F", BAD,
"http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
+ B("Supermicro", "X9SCL", BAD,
"http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm",
"Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash
are problematic: descriptor is r/o (conforming to ICH reqs), ME region
is locked."),
+ B("T-Online", "S-100", OK,
"http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
+ B("Tekram", "P6Pro-A5", OK,
"http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
+ B("Termtek", "TK-3370 (Rev:2.5B)", OK,
NULL, NULL),
+ B("Thomson", "IP1000", OK,
"http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
+ B("TriGem", "Anaheim-3", OK,
"http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml",
NULL),
+ B("TriGem", "Lomita", OK,
"http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml",
NULL),
+ B("Tyan", "S5375-1U (Tempest i5100X)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
+ B("Tyan", "S1846 (Tsunami ATX)", OK,
"http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
+ B("Tyan", "S2466 (Tiger MPX)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
+ B("Tyan", "S2498 (Tomcat K7M)", OK,
"http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
+ B("Tyan", "S2723 (Tiger i7501)", OK,
"http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
+ B("Tyan", "S2881 (Thunder K8SR)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
+ B("Tyan", "S2882 (Thunder K8S Pro)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
+ B("Tyan", "S2882-D (Thunder K8SD Pro)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
+ B("Tyan", "S2891 (Thunder K8SRE)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
+ B("Tyan", "S2892 (Thunder K8SE)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
+ B("Tyan", "S2895 (Thunder K8WE)", OK,
"http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
+ B("Tyan", "S2912 (Thunder n3600R)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
+ B("Tyan", "S2915 (Thunder n6650W)", OK,
"http://tyan.com/product_board_detail.aspx?pid=163", NULL),
+ B("Tyan", "S2915-E (Thunder n6650W)", OK,
"http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041",
NULL),
+ B("Tyan", "S2933 (Thunder n3600S)", OK,
"http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063",
NULL),
+ B("Tyan", "S3095 (Tomcat i945GM)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
+ B("Tyan", "S3992 (Thunder h2000M)", OK,
"http://tyan.com/product_board_detail.aspx?pid=235", NULL),
+ B("Tyan", "S5180 (Toledo i965R)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
+ B("Tyan", "S5191 (Toledo i3000R)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
+ B("Tyan", "S5197 (Toledo i3010W)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
+ B("Tyan", "S5211 (Toledo i3210W)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
+ B("Tyan", "S5211-1U (Toledo i3200R)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
+ B("Tyan", "S5220 (Toledo q35T)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
+ B("Tyan", "S5375 (Tempest i5100X)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
+ B("Tyan", "S5376 (Tempest i5100W)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=605", "Both
S5376G2NR and S5376WAG2NR should work."),
+ B("Tyan", "S5377 (Tempest i5100T)", OK,
"http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…",
NULL),
+ B("Tyan", "S5382 (Tempest i5000PW)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
+ B("Tyan", "S5397 (Tempest i5400PW)", OK,
"http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
+ B("VIA", "EPIA M/MII/...", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL), /* EPIA-MII link for now */
+ B("VIA", "EPIA SP", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
+ B("VIA", "EPIA-CN", OK,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
+ B("VIA", "EPIA EK", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…",
NULL),
+ B("VIA", "EPIA-EX15000G", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
+ B("VIA", "EPIA-LN", OK,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
+ B("VIA", "EPIA-M700", OK,
"http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…",
NULL),
+ B("VIA", "EPIA-N/NL", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL), /* EPIA-N link for now */
+ B("VIA", "EPIA-NX15000G", OK,
"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…",
NULL),
+ B("VIA", "NAB74X0", OK,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
+ B("VIA", "pc2500e", OK,
"http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp",
NULL),
+ B("VIA", "PC3500G", OK,
"http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp",
NULL),
+ B("VIA", "VB700X", OK,
"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…",
NULL),
+ B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK,
NULL, NULL),
+ B("ZOTAC", "GeForce 8200", OK,
"http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…",
NULL),
+ B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD,
NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("ZOTAC", "ZBOX HD-ID11", OK,
"http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…",
NULL),
#endif
{},
@@ -975,19 +990,19 @@
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info laptops_known[] = {
#if defined(__i386__) || defined(__x86_64__)
- B("Acer", "Aspire 1520", 1,
"http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…",
NULL),
- B("Acer", "Aspire One", 0, NULL,
"http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
- B("ASUS", "A8Jm", 1, NULL, NULL),
- B("ASUS", "Eee PC 701 4G", 0,
"http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip
(25X40VSIG) is behind some SPI flash translation layer (likely in the
EC, the ENE KB3310)."),
- B("ASUS", "M6Ne", 0,
"http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/",
"Untested board enable."),
- B("Clevo", "P150HM", 0,
"http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307",
"Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
- B("Dell", "Latitude CPi A366XT", 0,
"http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop
immediately powers off if you try to hot-swap the chip. It's not yet
tested if write/erase would work on this laptop."),
- B("HP/Compaq", "nx9005", 0,
"http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML",
"Shuts down when probing for a chip.
http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
- B("HP/Compaq", "nx9010", 0,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…",
"Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
- B("IBM/Lenovo", "Thinkpad T40p", 0,
"http://www.thinkwiki.org/wiki/Category:T40p", NULL),
- B("IBM/Lenovo", "Thinkpad T410s", 0,
"http://www.thinkwiki.org/wiki/Category:T410s", "Probing works
(Winbond W25X64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME and
platform are locked."),
- B("IBM/Lenovo", "240", 0,
"http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially)
work at first, but one block/sector cannot be written which then
leaves you with a bricked laptop. Maybe this can be investigated and
fixed in software later."),
- B("Lenovo", "3000 V100 TF05Cxx", 1,
"http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…",
NULL),
+ B("Acer", "Aspire 1520", OK,
"http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…",
NULL),
+ B("Acer", "Aspire One", BAD, NULL,
"http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
+ B("ASUS", "A8Jm", OK, NULL, NULL),
+ B("ASUS", "Eee PC 701 4G", BAD,
"http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip
(25X40VSIG) is behind some SPI flash translation layer (likely in the
EC, the ENE KB3310)."),
+ B("ASUS", "M6Ne", NT,
"http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/",
"Untested board enable."),
+ B("Clevo", "P150HM", BAD,
"http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307",
"Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the
flash are problematic: descriptor is r/o (conforming to ICH reqs), ME
region is locked."),
+ B("Dell", "Latitude CPi A366XT", BAD,
"http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop
immediately powers off if you try to hot-swap the chip. It's not yet
tested if write/erase would work on this laptop."),
+ B("HP/Compaq", "nx9005", BAD,
"http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML",
"Shuts down when probing for a chip.
http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
+ B("HP/Compaq", "nx9010", BAD,
"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…",
"Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
+ B("IBM/Lenovo", "Thinkpad T40p", BAD,
"http://www.thinkwiki.org/wiki/Category:T40p", NULL),
+ B("IBM/Lenovo", "Thinkpad T410s", BAD,
"http://www.thinkwiki.org/wiki/Category:T410s", "Probing works
(Winbond W25X64, 8192 kB, SPI), but parts of the flash are
problematic: descriptor is r/o (conforming to ICH reqs), ME and
platform are locked."),
+ B("IBM/Lenovo", "240", BAD,
"http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially)
work at first, but one block/sector cannot be written which then
leaves you with a bricked laptop. Maybe this can be investigated and
fixed in software later."),
+ B("Lenovo", "3000 V100 TF05Cxx", OK,
"http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…",
NULL),
#endif
{},
2012/2/19 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>:
>
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
> ---
> ft2232_spi.c | 13 -------
> print.c | 15 ++++++++
> print_wiki.c | 106 +++++++++++++++++++++++++++++++++++++++++++---------------
> 3 files changed, 94 insertions(+), 40 deletions(-)
>
> diff --git a/ft2232_spi.c b/ft2232_spi.c
> index 122866f..ec4934e 100644
> --- a/ft2232_spi.c
> +++ b/ft2232_spi.c
> @@ -435,17 +435,4 @@ static int ft2232_spi_send_command(struct flashctx *flash,
> return failed ? -1 : 0;
> }
>
> -void print_supported_usbdevs(const struct usbdev_status *devs)
> -{
> - int i;
> -
> - msg_pinfo("USB devices:\n");
> - for (i = 0; devs[i].vendor_name != NULL; i++) {
> - msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
> - devs[i].device_name, devs[i].vendor_id,
> - devs[i].device_id,
> - (devs[i].status == NT) ? " (untested)" : "");
> - }
> -}
> -
> #endif
> diff --git a/print.c b/print.c
> index 1fdeac7..f0c701e 100644
> --- a/print.c
> +++ b/print.c
> @@ -422,6 +422,21 @@ static void print_supported_boards_helper(const struct board_info *boards,
> }
> #endif
>
> +#if CONFIG_FT2232_SPI == 1
> +void print_supported_usbdevs(const struct usbdev_status *devs)
> +{
> + int i;
> +
> + msg_pinfo("USB devices:\n");
> + for (i = 0; devs[i].vendor_name != NULL; i++) {
> + msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
> + devs[i].device_name, devs[i].vendor_id,
> + devs[i].device_id,
> + (devs[i].status == NT) ? " (untested)" : "");
> + }
> +}
> +#endif
> +
> void print_supported(void)
> {
> print_supported_chips();
> diff --git a/print_wiki.c b/print_wiki.c
> index 377154d..a8c9d76 100644
> --- a/print_wiki.c
> +++ b/print_wiki.c
> @@ -72,10 +72,7 @@ static const char chip_th[] = "{\
> | Probe\n| Read\n| Erase\n| Write\n\
> | align=\"center\" | Min \n| align=\"center\" | Max\n\n";
>
> -static const char programmer_section[] = "\
> -\n== Supported programmers ==\n\nThis is a list \
> -of supported PCI devices flashrom can use as programmer:\n\n{| border=\"0\" \
> -valign=\"top\"\n| valign=\"top\"|\n\n{| border=\"0\" style=\"font-size: \
> +static const char programmer_th[] = "{| border=\"0\" style=\"font-size: \
> smaller\" valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> ! align=\"left\" | Device\n! align=\"center\" | PCI IDs\n\
> ! align=\"center\" | Status\n\n";
> @@ -126,7 +123,7 @@ static void print_supported_chipsets_wiki(int cols)
> printf("\n|}\n\n|}\n");
> }
>
> -static void wiki_helper(const char *devicetype, int cols,
> +static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
> const struct board_info boards[])
> {
> int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1;
> @@ -199,10 +196,10 @@ static void wiki_helper(const char *devicetype, int cols,
> static void print_supported_boards_wiki(void)
> {
> printf("%s", board_intro);
> - wiki_helper("boards", 2, boards_known);
> + print_supported_boards_wiki_helper("boards", 2, boards_known);
>
> printf("%s", laptop_intro);
> - wiki_helper("laptops", 1, laptops_known);
> + print_supported_boards_wiki_helper("laptops", 1, laptops_known);
> }
> #endif
>
> @@ -276,7 +273,16 @@ static void print_supported_chips_wiki(int cols)
>
> /* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */
> #if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1
> -static void print_supported_pcidevs_wiki(const struct pcidev_status *devs)
> +static int count_supported_pcidevs_wiki(const struct pcidev_status *devs)
> +{
> + int i = 0;
> + unsigned int count = 0;
> + for (i = 0; devs[i].vendor_name != NULL; i++)
> + count++;
> + return count;
> +}
> +
> +static void print_supported_pcidevs_wiki_helper(const struct pcidev_status *devs)
> {
> int i = 0;
> static int c = 0;
> @@ -294,50 +300,96 @@ static void print_supported_pcidevs_wiki(const struct pcidev_status *devs)
> }
> #endif
>
> -void print_supported_wiki(void)
> +static void print_supported_pcidevs_wiki()
> {
> - time_t t = time(NULL);
> + unsigned int pci_count = 0;
>
> - printf(wiki_header, ctime(&t), flashrom_version);
> - print_supported_chips_wiki(2);
> -#if CONFIG_INTERNAL == 1
> - print_supported_chipsets_wiki(3);
> - print_supported_boards_wiki();
> +#if CONFIG_NIC3COM == 1
> + pci_count += count_supported_pcidevs_wiki(nics_3com);
> +#endif
> +#if CONFIG_NICREALTEK == 1
> + pci_count += count_supported_pcidevs_wiki(nics_realtek);
> +#endif
> +#if CONFIG_NICNATSEMI == 1
> + pci_count += count_supported_pcidevs_wiki(nics_natsemi);
> +#endif
> +#if CONFIG_GFXNVIDIA == 1
> + pci_count += count_supported_pcidevs_wiki(gfx_nvidia);
> +#endif
> +#if CONFIG_DRKAISER == 1
> + pci_count += count_supported_pcidevs_wiki(drkaiser_pcidev);
> +#endif
> +#if CONFIG_SATASII == 1
> + pci_count += count_supported_pcidevs_wiki(satas_sii);
> +#endif
> +#if CONFIG_ATAHPT == 1
> + pci_count += count_supported_pcidevs_wiki(ata_hpt);
> +#endif
> +#if CONFIG_NICINTEL == 1
> + pci_count += count_supported_pcidevs_wiki(nics_intel);
> +#endif
> +#if CONFIG_NICINTEL_SPI == 1
> + pci_count += count_supported_pcidevs_wiki(nics_intel_spi);
> +#endif
> +#if CONFIG_OGP_SPI == 1
> + pci_count += count_supported_pcidevs_wiki(ogp_spi);
> +#endif
> +#if CONFIG_SATAMV == 1
> + pci_count += count_supported_pcidevs_wiki(satas_mv);
> #endif
> - printf("%s", programmer_section);
> +
> + printf("\n== Supported programmers ==\n\nTotal amount of supported "
> + "PCI devices flashrom can use as programmer: '''%d'''\n\n"
> + "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n",
> + pci_count);
> + printf("%s", programmer_th);
> +
> #if CONFIG_NIC3COM == 1
> - print_supported_pcidevs_wiki(nics_3com);
> + print_supported_pcidevs_wiki_helper(nics_3com);
> #endif
> #if CONFIG_NICREALTEK == 1
> - print_supported_pcidevs_wiki(nics_realtek);
> + print_supported_pcidevs_wiki_helper(nics_realtek);
> #endif
> #if CONFIG_NICNATSEMI == 1
> - print_supported_pcidevs_wiki(nics_natsemi);
> + print_supported_pcidevs_wiki_helper(nics_natsemi);
> #endif
> #if CONFIG_GFXNVIDIA == 1
> - print_supported_pcidevs_wiki(gfx_nvidia);
> + print_supported_pcidevs_wiki_helper(gfx_nvidia);
> #endif
> #if CONFIG_DRKAISER == 1
> - print_supported_pcidevs_wiki(drkaiser_pcidev);
> + print_supported_pcidevs_wiki_helper(drkaiser_pcidev);
> #endif
> #if CONFIG_SATASII == 1
> - print_supported_pcidevs_wiki(satas_sii);
> + print_supported_pcidevs_wiki_helper(satas_sii);
> #endif
> #if CONFIG_ATAHPT == 1
> - print_supported_pcidevs_wiki(ata_hpt);
> + print_supported_pcidevs_wiki_helper(ata_hpt);
> #endif
> #if CONFIG_NICINTEL == 1
> - print_supported_pcidevs_wiki(nics_intel);
> + print_supported_pcidevs_wiki_helper(nics_intel);
> #endif
> #if CONFIG_NICINTEL_SPI == 1
> - print_supported_pcidevs_wiki(nics_intel_spi);
> + print_supported_pcidevs_wiki_helper(nics_intel_spi);
> #endif
> #if CONFIG_OGP_SPI == 1
> - print_supported_pcidevs_wiki(ogp_spi);
> + print_supported_pcidevs_wiki_helper(ogp_spi);
> #endif
> #if CONFIG_SATAMV == 1
> - print_supported_pcidevs_wiki(satas_mv);
> + print_supported_pcidevs_wiki_helper(satas_mv);
> #endif
> printf("\n|}\n");
> }
>
> +void print_supported_wiki(void)
> +{
> + time_t t = time(NULL);
> +
> + printf(wiki_header, ctime(&t), flashrom_version);
> + print_supported_chips_wiki(2);
> +#if CONFIG_INTERNAL == 1
> + print_supported_chipsets_wiki(3);
> + print_supported_boards_wiki();
> +#endif
> + print_supported_pcidevs_wiki();
> +}
> +
> --
> 1.7.1
>
>
> _______________________________________________
> flashrom mailing list
> flashrom(a)flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
1
0
20 Feb '12
2012/2/19 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>:
> Previously boards in the wiki were tagged either as working or as known
> bad. But we added support to various boards via board enables that were
> then never tested because the owners have not reported back. This can
> now be tagged with NT and is shown appropriately.
>
> Also, the underlying data structure indicating state was converted from
> macros to an enum while preserving original integer values.
>
> Because all lines specifying supported boards and laptops were touched
> anyway, this patch also re-indents them.
>
> ---
> TODO: change other occurrences to use it. wanted to get feedack first.
>
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
> ---
> flash.h | 7 +-
> print.c | 869 +++++++++++++++++++++++++++++-----------------------------
> print_wiki.c | 7 +-
> programmer.h | 6 +-
> 4 files changed, 446 insertions(+), 443 deletions(-)
>
> diff --git a/flash.h b/flash.h
> index 0dac13d..4d0d79b 100644
> --- a/flash.h
> +++ b/flash.h
> @@ -251,8 +251,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, i
> int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename);
> int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename);
>
> -#define OK 0
> -#define NT 1 /* Not tested */
> +enum test_state {
> + OK = 0,
> + NT = 1, /* Not tested */
> + BAD
BAD = -1 ?
> +};
>
> /* Something happened that shouldn't happen, but we can go on. */
> #define ERROR_NONFATAL 0x100
> diff --git a/print.c b/print.c
> index f0c701e..6969551 100644
> --- a/print.c
> +++ b/print.c
> @@ -560,428 +560,427 @@ void print_supported(void)
> /* Please keep this list alphabetically ordered by vendor/board. */
> const struct board_info boards_known[] = {
> #if defined(__i386__) || defined(__x86_64__)
> - B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
> - B("abit", "A-S78H", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> - B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> - B("abit", "AV8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> - B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> - B("abit", "BM6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> - B("abit", "Fatal1ty F-I90HD", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> - B("abit", "IC7", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> - B("abit", "IP35", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
> - B("abit", "IP35 Pro", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
> - B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
> - B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> - B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
> - B("abit", "NF-M2S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> - B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
> - B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
> - B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
> - B("Acorp", "6A815EPD", 1, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL),
> - B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
> - B("agami", "Aruma", 1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL),
> - B("Albatron", "PM266A Pro", 1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */
> - B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
> - B("AOpen", "vKM400Am-S", 1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
> - B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL),
> - B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL),
> - B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."),
> - B("ASRock", "775i65G", 1, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
> - B("ASRock", "890GX Extreme3", 1, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
> - B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
> - B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
> - B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
> - B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
> - B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
> - B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
> - B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
> - B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
> - B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
> - B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
> - B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
> - B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
> - B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
> - B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
> - B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
> - B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
> - B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
> - B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
> - B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
> - B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
> - B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
> - B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
> - B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
> - B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
> - B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
> - B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
> - B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
> - B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."),
> - B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
> - B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
> - B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
> - B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL),
> - B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
> - B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
> - B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
> - B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
> - B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
> - B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL),
> - B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
> - B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
> - B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
> - B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
> - B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
> - B("ASUS", "KFSN4-DRE/SAS", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
> - B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
> - B("ASUS", "M2A-VM (HDMI)", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
> - B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
> - B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
> - B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
> - B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
> - B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
> - B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
> - B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
> - B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
> - B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
> - B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
> - B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
> - B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
> - B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
> - B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
> - B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
> - B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
> - B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
> - B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
> - B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
> - B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
> - B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
> - B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> - B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> - B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."),
> - B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
> - B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
> - B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
> - B("ASUS", "P2B-F", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
> - B("ASUS", "P2B-N", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
> - B("ASUS", "P2E-M", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
> - B("ASUS", "P2L97-S", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
> - B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> - B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
> - B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
> - B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
> - B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL),
> - B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL),
> - B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
> - B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL),
> - B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
> - B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"),
> - B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
> - B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
> - B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
> - B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
> - B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
> - B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL),
> - B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."),
> - B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL),
> - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
> - B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),
> - B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."),
> - B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL),
> - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
> - B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
> - B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."),
> - B("ASUS", "P5K-V", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
> - B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
> - B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
> - B("ASUS", "P5KPL-CM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
> - B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
> - B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
> - B("ASUS", "P5LD2", 0, NULL, "Untested board enable."),
> - B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."),
> - B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
> - B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."),
> - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."),
> - B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
> - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
> - B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
> - B("ASUS", "P5N7A-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
> - B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
> - B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
> - B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
> - B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
> - B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
> - B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
> - B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL),
> - B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL),
> - B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
> - B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
> - B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
> - B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
> - B("Bifferos", "Bifferboard", 1, "http://bifferos.co.uk/", NULL),
> - B("Biostar", "N68S3+", 1, NULL, NULL),
> - B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> - B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
> - B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
> - B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
> - B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
> - B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
> - B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
> - B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
> - B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
> - B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),
> - B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL),
> - B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL),
> - B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL),
> - B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL),
> - B("Elitegroup", "K7SEM (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL),
> - B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),
> - B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> - B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL),
> - B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> - B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL),
> - B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> - B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL),
> - B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
> - B("EPoX", "EP-8NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
> - B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
> - B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
> - B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL),
> - B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL),
> - B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
> - B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
> - B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
> - B("Foxconn", "A6VMX", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
> - B("Foxconn", "P4M800P7MA-RS2", 1, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL),
> - B("Freetech", "P6F91i", 1, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL),
> - B("Fujitsu-Siemens", "ESPRIMO P5915", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."),
> - B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL),
> - B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
> - B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
> - B("GIGABYTE", "GA-6IEM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
> - B("GIGABYTE", "GA-6VXE7+", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
> - B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
> - B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
> - B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
> - B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
> - B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
> - B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
> - B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
> - B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
> - B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
> - B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
> - B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
> - B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
> - B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
> - B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
> - B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
> - B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
> - B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
> - B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
> - B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
> - B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
> - B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
> - B("GIGABYTE", "GA-K8NS Pro-939", 0, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
> - B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
> - B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
> - B("GIGABYTE", "GA-M720-US3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
> - B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
> - B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
> - B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
> - B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
> - B("GIGABYTE", "GA-MA780G-UD3H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
> - B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
> - B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */
> - B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
> - B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
> - B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
> - B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
> - B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
> - B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
> - B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL),
> - B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL),
> - B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
> - B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
> - B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL),
> - B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL),
> - B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
> - B("HP", "ProLiant N40L", 1, NULL, NULL),
> - B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
> - B("HP", "dc7800", 0, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
> - B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
> - B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
> - B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
> - B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."),
> - B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL),
> - B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
> - B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL),
> - B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
> - B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
> - B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
> - B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
> - B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
> - B("Intel", "EP80759", 1, NULL, NULL),
> - B("Intel", "Foxhollow", 1, NULL, "Intel reference board."),
> - B("Intel", "Greencity", 1, NULL, "Intel reference board."),
> - B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
> - B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL),
> - B("Jetway", "J-7BXAN", 1, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
> - B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL),
> - B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL),
> - B("Lanner", "EM-8510C", 1, NULL, NULL),
> - B("Lex", "CV700A", 1, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
> - B("Mitac", "6513WU", 1, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL),
> - B("MSC", "Q7-TCTC", 1, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
> - B("MSI", "MS-6153", 1, "http://www.msi.com/product/mb/MS-6153.html", NULL),
> - B("MSI", "MS-6156", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL),
> - B("MSI", "MS-6163 (MS-6163 Pro)",1, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
> - B("MSI", "MS-6178", 0, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
> - B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
> - B("MSI", "MS-6391 (845 Pro4)", 1, "http://www.msi.com/product/mb/845-Pro4.html", NULL),
> - B("MSI", "MS-6561 (745 Ultra)", 1, "http://www.msi.com/product/mb/745-Ultra.html", NULL),
> - B("MSI", "MS-6566 (845 Ultra-C)",1, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
> - B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/product/mb/K7N2.html", NULL),
> - B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."),
> - B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
> - B("MSI", "MS-6702E (K8T Neo2-F)",1, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
> - B("MSI", "MS-6712 (KT4V)", 1, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
> - B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 1, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
> - B("MSI", "MS-7005 (651M-L)", 1, "http://www.msi.com/product/mb/651M-L.html", NULL),
> - B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
> - B("MSI", "MS-7046", 1, "http://www.heimir.de/ms7046/", NULL),
> - B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
> - B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
> - B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
> - B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
> - B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL),
> - B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
> - B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/product/mb/PM8M3-V.html", NULL),
> - B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
> - B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
> - B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
> - B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
> - B("MSI", "MS-7309 (K9N6PGM2-V2)", 1, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
> - B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
> - B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
> - B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
> - B("MSI", "MS-7369 (K9N Neo V2)", 1, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
> - B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
> - B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
> - B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
> - B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL),
> - B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
> - B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL),
> - B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
> - B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
> - B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
> - B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
> - B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
> - B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
> - B("Nokia", "IP530", 1, NULL, NULL),
> - B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL),
> - B("PCCHIPS ", "M863G (V5.1A)", 1, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL),
> - B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL),
> - B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL),
> - B("PC Engines", "Alix.2c3", 1, "http://pcengines.ch/alix2c3.htm", NULL),
> - B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL),
> - B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL),
> - B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL),
> - B("PC Engines", "Alix.6f2", 1, "http://pcengines.ch/alix6f2.htm", NULL),
> - B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL),
> - B("Portwell", "PEB-4700VLA", 1, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
> - B("RCA", "RM4100", 1, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
> - B("Samsung", "Polaris 32", 1, NULL, NULL),
> - B("Shuttle", "AK31", 1, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
> - B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
> - B("Shuttle", "AV11V30", 1, NULL, NULL),
> - B("Shuttle", "AV18E2", 1, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
> - B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
> - B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
> - B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
> - B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
> - B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> - B("Soyo", "SY-6BA+ III", 1, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
> - B("Soyo", "SY-7VCA", 1, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL),
> - B("Sun", "Blade x6250", 1, "http://www.sun.com/servers/blades/x6250/", NULL),
> - B("Sun", "Fire x4150", 0, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."),
> - B("Sun", "Fire x4200", 0, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."),
> - B("Sun", "Fire x4540", 0, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."),
> - B("Sun", "Fire x4600", 0, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
> - B("Sun", "Ultra 40 M2", 1, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL),
> - B("Supermicro", "H8QC8", 1, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
> - B("Supermicro", "X5DP8-G2", 1, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
> - B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
> - B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL),
> - B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
> - B("Supermicro", "X8DTE-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL),
> - B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
> - B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
> - B("Supermicro", "X8DTT-HIBQF", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
> - B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
> - B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
> - B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
> - B("Supermicro", "X9SCA-F", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
> - B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
> - B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL),
> - B("Thomson", "IP1000", 1, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
> - B("TriGem", "Anaheim-3", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL),
> - B("TriGem", "Lomita", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL),
> - B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
> - B("Tyan", "S1846 (Tsunami ATX)", 1, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
> - B("Tyan", "S2466 (Tiger MPX)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
> - B("Tyan", "S2498 (Tomcat K7M)", 1, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
> - B("Tyan", "S2723 (Tiger i7501)", 1, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
> - B("Tyan", "S2881 (Thunder K8SR)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
> - B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
> - B("Tyan", "S2882-D (Thunder K8SD Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
> - B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
> - B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
> - B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
> - B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
> - B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL),
> - B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL),
> - B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL),
> - B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
> - B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),
> - B("Tyan", "S5180 (Toledo i965R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
> - B("Tyan", "S5191 (Toledo i3000R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
> - B("Tyan", "S5197 (Toledo i3010W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
> - B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
> - B("Tyan", "S5211-1U (Toledo i3200R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
> - B("Tyan", "S5220 (Toledo q35T)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
> - B("Tyan", "S5375 (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
> - B("Tyan", "S5376 (Tempest i5100W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."),
> - B("Tyan", "S5377 (Tempest i5100T)", 1, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL),
> - B("Tyan", "S5382 (Tempest i5000PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
> - B("Tyan", "S5397 (Tempest i5400PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
> - B("VIA", "EPIA M/MII/...", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */
> - B("VIA", "EPIA SP", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> - B("VIA", "EPIA-CN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> - B("VIA", "EPIA EK", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL),
> - B("VIA", "EPIA-EX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> - B("VIA", "EPIA-LN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> - B("VIA", "EPIA-M700", 1, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL),
> - B("VIA", "EPIA-N/NL", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */
> - B("VIA", "EPIA-NX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> - B("VIA", "NAB74X0", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> - B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL),
> - B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL),
> - B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> - B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL),
> - B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL),
> - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL),
> + B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
> + B("abit", "A-S78H", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> + B("abit", "AN-M2", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> + B("abit", "AV8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> + B("abit", "AX8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> + B("abit", "BM6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> + B("abit", "Fatal1ty F-I90HD", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> + B("abit", "IC7", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> + B("abit", "IP35", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
> + B("abit", "IP35 Pro", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
> + B("abit", "IS-10", BAD, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
> + B("abit", "KN8 Ultra", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
> + B("abit", "NF-M2 nView", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
> + B("abit", "NF-M2S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
> + B("abit", "NF7-S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
> + B("abit", "VA6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
> + B("abit", "VT6X4", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
> + B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL),
> + B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
> + B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL),
> + B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */
> + B("AOpen", "i945GMx-VFX", OK, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
> + B("AOpen", "vKM400Am-S", OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
> + B("Artec Group","DBE61", OK, "http://wiki.thincan.org/DBE61", NULL),
> + B("Artec Group","DBE62", OK, "http://wiki.thincan.org/DBE62", NULL),
> + B("ASI", "MB-5BLMP", OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."),
> + B("ASRock", "775i65G", OK, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
> + B("ASRock", "890GX Extreme3", OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
> + B("ASRock", "939A785GMH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
> + B("ASRock", "A330GC", OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
> + B("ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
> + B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
> + B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
> + B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
> + B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
> + B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
> + B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
> + B("ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
> + B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
> + B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
> + B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
> + B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
> + B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
> + B("ASUS", "A7V133", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
> + B("ASUS", "A7V333", OK, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
> + B("ASUS", "A7V400-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
> + B("ASUS", "A7V600-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
> + B("ASUS", "A7V8X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
> + B("ASUS", "A7V8X-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
> + B("ASUS", "A7V8X-MX SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
> + B("ASUS", "A7V8X-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
> + B("ASUS", "A8M2N-LA (NodusM3-GL8E)", OK, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
> + B("ASUS", "A8N-E", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
> + B("ASUS", "A8N-LA (Nagami-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
> + B("ASUS", "A8N-SLI", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
> + B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Untested board enable."),
> + B("ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
> + B("ASUS", "A8N-VM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
> + B("ASUS", "A8N-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
> + B("ASUS", "A8NE-FM/S", OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL),
> + B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
> + B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
> + B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
> + B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
> + B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
> + B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL),
> + B("ASUS", "K8N", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
> + B("ASUS", "K8V", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
> + B("ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
> + B("ASUS", "K8V-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
> + B("ASUS", "K8V-X SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
> + B("ASUS", "KFSN4-DRE/SAS", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
> + B("ASUS", "M2A-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
> + B("ASUS", "M2A-VM (HDMI)", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
> + B("ASUS", "M2N32-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
> + B("ASUS", "M2N-E", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
> + B("ASUS", "M2N-E SLI", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
> + B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
> + B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
> + B("ASUS", "M2NPV-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
> + B("ASUS", "M2V", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
> + B("ASUS", "M2V-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
> + B("ASUS", "M3A", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
> + B("ASUS", "M3A76-CM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
> + B("ASUS", "M3A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
> + B("ASUS", "M3N78-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
> + B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
> + B("ASUS", "M4A785TD-M EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
> + B("ASUS", "M4A785TD-V EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
> + B("ASUS", "M4A78LT-M LE", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
> + B("ASUS", "M4A79T Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
> + B("ASUS", "M4A87TD/USB3", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
> + B("ASUS", "M4A89GTD PRO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
> + B("ASUS", "M4N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
> + B("ASUS", "M5A99X EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
> + B("ASUS", "MEW-AM", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> + B("ASUS", "MEW-VM", BAD, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> + B("ASUS", "OPLX-M", NT, NULL, "Untested board enable."),
> + B("ASUS", "P2B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
> + B("ASUS", "P2B-D", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
> + B("ASUS", "P2B-DS", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
> + B("ASUS", "P2B-F", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
> + B("ASUS", "P2B-N", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
> + B("ASUS", "P2E-M", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
> + B("ASUS", "P2L97-S", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
> + B("ASUS", "P3B-F", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> + B("ASUS", "P4B266", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
> + B("ASUS", "P4B266-LM", OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
> + B("ASUS", "P4B533-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
> + B("ASUS", "P4C800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL),
> + B("ASUS", "P4GV-LA (Guppy)", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL),
> + B("ASUS", "P4P800", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
> + B("ASUS", "P4P800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL),
> + B("ASUS", "P4P800-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
> + B("ASUS", "P4SC-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"),
> + B("ASUS", "P4SD-LA", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
> + B("ASUS", "P4S533-X", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
> + B("ASUS", "P4S800-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
> + B("ASUS", "P5A", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
> + B("ASUS", "P5B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
> + B("ASUS", "P5B-Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL),
> + B("ASUS", "P5BV-M", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."),
> + B("ASUS", "P5GC-MX/1333", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL),
> + B("ASUS", "P5GD1 Pro", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
> + B("ASUS", "P5GD1-VM/S", OK, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),
> + B("ASUS", "P5GD1(-VM)", NT, NULL, "Untested board enable."),
> + B("ASUS", "P5GD2 Premium", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL),
> + B("ASUS", "P5GDC Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
> + B("ASUS", "P5GDC-V Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
> + B("ASUS", "P5GD2/C variants", NT, NULL, "Untested board enable."),
> + B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
> + B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
> + B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
> + B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
> + B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
> + B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
> + B("ASUS", "P5LD2", NT, NULL, "Untested board enable."),
> + B("ASUS", "P5LP-LE (Lithium-UL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."),
> + B("ASUS", "P5LP-LE (Epson OEM)", OK, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
> + B("ASUS", "P5LP-LE", BAD, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."),
> + B("ASUS", "P5N-D", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
> + B("ASUS", "P5N-E SLI", NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
> + B("ASUS", "P5N32-E SLI", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
> + B("ASUS", "P5N7A-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
> + B("ASUS", "P5ND2-SLI Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
> + B("ASUS", "P5PE-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
> + B("ASUS", "P5QPL-AM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
> + B("ASUS", "P5VD1-X", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
> + B("ASUS", "P6T SE", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
> + B("ASUS", "P6T Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
> + B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL),
> + B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL),
> + B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
> + B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
> + B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
> + B("BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
> + B("Bifferos", "Bifferboard", OK, "http://bifferos.co.uk/", NULL),
> + B("Biostar", "N68S3+", OK, NULL, NULL),
> + B("Biostar", "M6TBA", BAD, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> + B("Biostar", "M7NCD Pro", OK, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
> + B("Biostar", "P4M80-M4", OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
> + B("Biostar", "TA780G M2+", OK, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
> + B("Boser", "HS-6637", BAD, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
> + B("Congatec", "conga-X852", OK, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
> + B("Dell", "OptiPlex GX1", OK, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
> + B("Dell", "PowerEdge 1850", OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
> + B("DFI", "855GME-MGF", BAD, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
> + B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),
> + B("Elitegroup", "GeForce6100SM-M ", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL),
> + B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL),
> + B("Elitegroup", "K7S5A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL),
> + B("Elitegroup", "K7S6A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL),
> + B("Elitegroup", "K7SEM (V1.0A)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL),
> + B("Elitegroup", "K7VTA3", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),
> + B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> + B("Elitegroup", "P4VXMS (V1.0A)", OK, NULL, NULL),
> + B("Elitegroup", "P6IWP-Fe", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> + B("Elitegroup", "P6VAP-A+", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL),
> + B("Elitegroup", "RS485M-M", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
> + B("Emerson", "ATCA-7360", OK, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL),
> + B("EPoX", "EP-8K5A2", OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
> + B("EPoX", "EP-8NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
> + B("EPoX", "EP-9NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
> + B("EPoX", "EP-8RDA3+", OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
> + B("EPoX", "EP-BX3", OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL),
> + B("EVGA", "132-CK-NF78", OK, "http://www.evga.com/articles/385.asp", NULL),
> + B("EVGA", "270-WS-W555-A2 (Classified SR-2)", OK, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
> + B("FIC", "VA-502", BAD, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
> + B("Foxconn", "6150K8MD-8EKRSH", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
> + B("Foxconn", "A6VMX", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
> + B("Foxconn", "P4M800P7MA-RS2", OK, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL),
> + B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL),
> + B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."),
> + B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL),
> + B("GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
> + B("GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
> + B("GIGABYTE", "GA-6IEM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
> + B("GIGABYTE", "GA-6VXE7+", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
> + B("GIGABYTE", "GA-6ZMA", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
> + B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
> + B("GIGABYTE", "GA-770TA-UD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
> + B("GIGABYTE", "GA-7DXR", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
> + B("GIGABYTE", "GA-7VT600", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
> + B("GIGABYTE", "GA-7ZM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
> + B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
> + B("GIGABYTE", "GA-8I945GZME-RH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
> + B("GIGABYTE", "GA-8IP775", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
> + B("GIGABYTE", "GA-8IRML", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
> + B("GIGABYTE", "GA-8PE667 Ultra 2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
> + B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
> + B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
> + B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
> + B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
> + B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
> + B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
> + B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
> + B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
> + B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
> + B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
> + B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
> + B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
> + B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
> + B("GIGABYTE", "GA-M720-US3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
> + B("GIGABYTE", "GA-MA69VM-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
> + B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
> + B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
> + B("GIGABYTE", "GA-MA770T-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
> + B("GIGABYTE", "GA-MA780G-UD3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
> + B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
> + B("GIGABYTE", "GA-MA78GM-S2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */
> + B("GIGABYTE", "GA-MA78GPM-DS2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
> + B("GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
> + B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
> + B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
> + B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
> + B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
> + B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL),
> + B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", OK, NULL, NULL),
> + B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
> + B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
> + B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL),
> + B("HP", "ProLiant DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL),
> + B("HP", "ProLiant DL165 G6", OK, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
> + B("HP", "ProLiant N40L", OK, NULL, NULL),
> + B("HP", "Puffer2-UL8E", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
> + B("HP", "dc7800", BAD, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
> + B("HP", "Vectra VL400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
> + B("HP", "Vectra VL420 SFF", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
> + B("HP", "xw4400 (0A68h)", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
> + B("HP", "xw9400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."),
> + B("IBASE", "MB899", OK, "http://www.ibase-i.com.tw/2009/mb899.html", NULL),
> + B("IBM", "x3455", OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
> + B("IEI", "PICOe-9452", OK, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL),
> + B("Intel", "D201GLY", OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
> + B("Intel", "D425KT", BAD, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
> + B("Intel", "D865GLC", BAD, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
> + B("Intel", "DG45ID", BAD, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
> + B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
> + B("Intel", "EP80759", OK, NULL, NULL),
> + B("Intel", "Foxhollow", OK, NULL, "Intel reference board."),
> + B("Intel", "Greencity", OK, NULL, "Intel reference board."),
> + B("Intel", "SE440BX-2", BAD, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
> + B("IWILL", "DK8-HTX", OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL),
> + B("Jetway", "J-7BXAN", OK, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
> + B("Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL),
> + B("Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL),
> + B("Lanner", "EM-8510C", OK, NULL, NULL),
> + B("Lex", "CV700A", OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
> + B("Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL),
> + B("MSC", "Q7-TCTC", OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
> + B("MSI", "MS-6153", OK, "http://www.msi.com/product/mb/MS-6153.html", NULL),
> + B("MSI", "MS-6156", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL),
> + B("MSI", "MS-6163 (MS-6163 Pro)", OK, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
> + B("MSI", "MS-6178", BAD, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
> + B("MSI", "MS-6330 (K7T Turbo)", OK, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
> + B("MSI", "MS-6391 (845 Pro4)", OK, "http://www.msi.com/product/mb/845-Pro4.html", NULL),
> + B("MSI", "MS-6561 (745 Ultra)", OK, "http://www.msi.com/product/mb/745-Ultra.html", NULL),
> + B("MSI", "MS-6566 (845 Ultra-C)", OK, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
> + B("MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/product/mb/K7N2.html", NULL),
> + B("MSI", "MS-6577 (Xenon)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."),
> + B("MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
> + B("MSI", "MS-6702E (K8T Neo2-F)", OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
> + B("MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
> + B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
> + B("MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/product/mb/651M-L.html", NULL),
> + B("MSI", "MS-7025 (K8N Neo2 Platinum)", OK, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
> + B("MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL),
> + B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
> + B("MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
> + B("MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
> + B("MSI", "MS-7142 (K8MM-V)", OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
> + B("MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL),
> + B("MSI", "MS-7207 (K8NGM2-L)", OK, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
> + B("MSI", "MS-7211 (PM8M3-V)", OK, "http://www.msi.com/product/mb/PM8M3-V.html", NULL),
> + B("MSI", "MS-7236 (945PL Neo3)", OK, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
> + B("MSI", "MS-7253 (K9VGM-V)", OK, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
> + B("MSI", "MS-7255 (P4M890M)", OK, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
> + B("MSI", "MS-7260 (K9N Neo PCB 1.0)", BAD, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
> + B("MSI", "MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
> + B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
> + B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
> + B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
> + B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
> + B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
> + B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
> + B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
> + B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL),
> + B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
> + B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL),
> + B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("MSI", "MS-7640 (890FXA-GD70)", OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
> + B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
> + B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
> + B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
> + B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
> + B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
> + B("Nokia", "IP530", OK, NULL, NULL),
> + B("PCCHIPS ", "M598LMR (V9.0)", OK, NULL, NULL),
> + B("PCCHIPS ", "M863G (V5.1A)", OK, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL),
> + B("PC Engines", "Alix.1c", OK, "http://pcengines.ch/alix1c.htm", NULL),
> + B("PC Engines", "Alix.2c2", OK, "http://pcengines.ch/alix2c2.htm", NULL),
> + B("PC Engines", "Alix.2c3", OK, "http://pcengines.ch/alix2c3.htm", NULL),
> + B("PC Engines", "Alix.2d3", OK, "http://pcengines.ch/alix2d3.htm", NULL),
> + B("PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL),
> + B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL),
> + B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL),
> + B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL),
> + B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
> + B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
> + B("Samsung", "Polaris 32", OK, NULL, NULL),
> + B("Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
> + B("Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
> + B("Shuttle", "AV11V30", OK, NULL, NULL),
> + B("Shuttle", "AV18E2", OK, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
> + B("Shuttle", "FD37", OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
> + B("Shuttle", "FH67", OK, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
> + B("Shuttle", "FN25", OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
> + B("Shuttle", "X50/X50(B)", OK, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
> + B("Soyo", "SY-5VD", BAD, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
> + B("Soyo", "SY-6BA+ III", OK, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
> + B("Soyo", "SY-7VCA", OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL),
> + B("Sun", "Blade x6250", OK, "http://www.sun.com/servers/blades/x6250/", NULL),
> + B("Sun", "Fire x4150", BAD, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."),
> + B("Sun", "Fire x4200", BAD, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."),
> + B("Sun", "Fire x4540", BAD, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."),
> + B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
> + B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL),
> + B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
> + B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
> + B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
> + B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL),
> + B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
> + B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL),
> + B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
> + B("Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
> + B("Supermicro", "X8DTT-HIBQF", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
> + B("Supermicro", "X8DTU-6TF+", BAD, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("Supermicro", "X8DTU-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
> + B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
> + B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
> + B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
> + B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
> + B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL),
> + B("Thomson", "IP1000", OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
> + B("TriGem", "Anaheim-3", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL),
> + B("TriGem", "Lomita", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL),
> + B("Tyan", "S5375-1U (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
> + B("Tyan", "S1846 (Tsunami ATX)", OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
> + B("Tyan", "S2466 (Tiger MPX)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
> + B("Tyan", "S2498 (Tomcat K7M)", OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
> + B("Tyan", "S2723 (Tiger i7501)", OK, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
> + B("Tyan", "S2881 (Thunder K8SR)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
> + B("Tyan", "S2882 (Thunder K8S Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
> + B("Tyan", "S2882-D (Thunder K8SD Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
> + B("Tyan", "S2891 (Thunder K8SRE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
> + B("Tyan", "S2892 (Thunder K8SE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
> + B("Tyan", "S2895 (Thunder K8WE)", OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
> + B("Tyan", "S2912 (Thunder n3600R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
> + B("Tyan", "S2915 (Thunder n6650W)", OK, "http://tyan.com/product_board_detail.aspx?pid=163", NULL),
> + B("Tyan", "S2915-E (Thunder n6650W)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL),
> + B("Tyan", "S2933 (Thunder n3600S)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL),
> + B("Tyan", "S3095 (Tomcat i945GM)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
> + B("Tyan", "S3992 (Thunder h2000M)", OK, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),
> + B("Tyan", "S5180 (Toledo i965R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
> + B("Tyan", "S5191 (Toledo i3000R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
> + B("Tyan", "S5197 (Toledo i3010W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
> + B("Tyan", "S5211 (Toledo i3210W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
> + B("Tyan", "S5211-1U (Toledo i3200R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
> + B("Tyan", "S5220 (Toledo q35T)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
> + B("Tyan", "S5375 (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
> + B("Tyan", "S5376 (Tempest i5100W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."),
> + B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL),
> + B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
> + B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
> + B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */
> + B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> + B("VIA", "EPIA-CN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> + B("VIA", "EPIA EK", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL),
> + B("VIA", "EPIA-EX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> + B("VIA", "EPIA-LN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> + B("VIA", "EPIA-M700", OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL),
> + B("VIA", "EPIA-N/NL", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */
> + B("VIA", "EPIA-NX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
> + B("VIA", "NAB74X0", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> + B("VIA", "pc2500e", OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL),
> + B("VIA", "PC3500G", OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL),
> + B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
> + B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL),
> + B("ZOTAC", "GeForce 8200", OK, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL),
> + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("ZOTAC", "ZBOX HD-ID11", OK, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL),
> #endif
>
> {},
> @@ -990,19 +989,19 @@ const struct board_info boards_known[] = {
> /* Please keep this list alphabetically ordered by vendor/board. */
> const struct board_info laptops_known[] = {
> #if defined(__i386__) || defined(__x86_64__)
> - B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL),
> - B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
> - B("ASUS", "A8Jm", 1, NULL, NULL),
> - B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
> - B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
> - B("Clevo", "P150HM", 0, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> - B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
> - B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
> - B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
> - B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
> - B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
> - B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
> - B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL),
> + B("Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL),
> + B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
> + B("ASUS", "A8Jm", OK, NULL, NULL),
> + B("ASUS", "Eee PC 701 4G", BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
> + B("ASUS", "M6Ne", NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
> + B("Clevo", "P150HM", BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
> + B("Dell", "Latitude CPi A366XT", BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
> + B("HP/Compaq", "nx9005", BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
> + B("HP/Compaq", "nx9010", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
> + B("IBM/Lenovo", "Thinkpad T40p", BAD, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
> + B("IBM/Lenovo", "Thinkpad T410s", BAD, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
> + B("IBM/Lenovo", "240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
> + B("Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL),
> #endif
>
> {},
> diff --git a/print_wiki.c b/print_wiki.c
> index a8c9d76..58f1612 100644
> --- a/print_wiki.c
> +++ b/print_wiki.c
> @@ -133,9 +133,9 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
> const struct board_match *b = board_matches;
>
> for (i = 0; boards[i].vendor != NULL; i++) {
> - if (boards[i].working)
> + if (boards[i].working == OK)
> boardcount_good++;
> - else
> + if (boards[i].working == BAD)
> boardcount_bad++;
> }
>
> @@ -168,7 +168,8 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
> b[k].lb_vendor ? b[k].lb_vendor : "",
> b[k].lb_vendor ? ":" : "",
> b[k].lb_vendor ? b[k].lb_part : "",
> - (boards[i].working) ? "OK" : "No");
> + (boards[i].working == OK) ? "OK" :
> + (boards[i].working == NT) ? "?3" : "No");
>
> if (boards[i].note) {
> printf("<sup>%d</sup>\n", num_notes + 1);
> diff --git a/programmer.h b/programmer.h
> index 240e1af..64efb40 100644
> --- a/programmer.h
> +++ b/programmer.h
> @@ -192,7 +192,7 @@ extern const struct board_match board_matches[];
> struct board_info {
> const char *vendor;
> const char *name;
> - const int working;
> + enum test_state working;
> #ifdef CONFIG_PRINT_WIKI
> const char *url;
> const char *note;
> @@ -217,7 +217,7 @@ extern struct pci_dev *pcidev_dev;
> struct pcidev_status {
> uint16_t vendor_id;
> uint16_t device_id;
> - int status;
> + enum test_state status;
> const char *vendor_name;
> const char *device_name;
> };
> @@ -415,7 +415,7 @@ extern const struct pcidev_status ata_hpt[];
> struct usbdev_status {
> uint16_t vendor_id;
> uint16_t device_id;
> - int status;
> + enum test_state status;
> const char *vendor_name;
> const char *device_name;
> };
> --
> 1.7.1
>
>
> _______________________________________________
> flashrom mailing list
> flashrom(a)flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
1
0
[PATCH] dummyflasher.c: add support for SFDP by adding a new emulator chip: W25Q64CV
by Stefan Tauner 20 Feb '12
by Stefan Tauner 20 Feb '12
20 Feb '12
TODO:
- how should the SFDP data be supplied/selected by the user?
- option A (suggested one): add a default table with a legit complete table and
a programmer option to use a binary file instead.
- option B: add multiple legit and invalid tables to cover most useful test cases
and add a programmer option to select which table should be used.
- option C: some combination of A and B
- Manpage
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
dummyflasher.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 82 insertions(+), 8 deletions(-)
diff --git a/dummyflasher.c b/dummyflasher.c
index afe0518..6d8b9a2 100644
--- a/dummyflasher.c
+++ b/dummyflasher.c
@@ -45,6 +45,7 @@ enum emu_chip {
EMULATE_ST_M25P10_RES,
EMULATE_SST_SST25VF040_REMS,
EMULATE_SST_SST25VF032B,
+ EMULATE_WINBOND_W25Q64CV,
};
static enum emu_chip emu_chip = EMULATE_NONE;
static char *emu_persistent_image = NULL;
@@ -61,6 +62,40 @@ unsigned char spi_blacklist[256];
unsigned char spi_ignorelist[256];
int spi_blacklist_size = 0;
int spi_ignorelist_size = 0;
+
+/* legit intel version */
+/*
+static const uint8_t const sfdp_table[256] = {
+ 0x53, 0x46, 0x44, 0x50, // @0x00
+ 0x00, 0x01, 0x00, 0xFF, // @0x04
+ 0x00, 0x00, 0x01, 0x04, // @0x08: len = 4 instead of 9
+ 0x14, 0x00, 0x00, 0xFF, // @0x0C: PTP0 = 0x14 instead of 0x80
+ 0xFF, 0xFF, 0xFF, 0xFF, // @0x10
+ 0xE5, 0x20, 0xF1, 0xFF, // @0x14
+ 0xFF, 0xFF, 0xFF, 0x03, // @0x18
+ 0x44, 0xEB, 0x08, 0x6B, // @0x1C
+ 0x08, 0x3B, 0x80, 0xBB, // @0x20
+
+};
+*/
+/* legit complete table */
+static const uint8_t const sfdp_table[256] = {
+ 0x53, 0x46, 0x44, 0x50, // @0x00
+ 0x00, 0x01, 0x00, 0xFF, // @0x04
+ 0x00, 0x00, 0x01, 0x09, // @0x08
+ 0x14, 0x00, 0x00, 0xFF, // @0x0C: PTP0 = 0x14 instead of 0x80
+ 0xFF, 0xFF, 0xFF, 0xFF, // @0x10
+ 0xE5, 0x20, 0xF1, 0xFF, // @0x14
+ 0xFF, 0xFF, 0xFF, 0x03, // @0x18
+ 0x44, 0xEB, 0x08, 0x6B, // @0x1C
+ 0x08, 0x3B, 0x80, 0xBB, // @0x20
+ 0xEE, 0xFF, 0xFF, 0xFF, // @0x24
+ 0xFF, 0xFF, 0x00, 0x00, // @0x28
+ 0xFF, 0xFF, 0x00, 0x00, // @0x2C
+ 0x0C, 0x20, 0x0F, 0x52, // @0x30
+ 0x10, 0xD8, 0x00, 0x00, // @0x34
+};
+
#endif
#endif
@@ -296,6 +331,19 @@ int dummy_init(void)
msg_pdbg("Emulating SST SST25VF032B SPI flash chip (RDID, AAI "
"write)\n");
}
+ if (!strcmp(tmp, "W25Q64CV")) {
+ emu_chip = EMULATE_WINBOND_W25Q64CV;
+ emu_chip_size = 8 * 1024 * 1024;
+ emu_max_byteprogram_size = 256;
+ emu_max_aai_size = 0;
+ emu_jedec_se_size = 4 * 1024;
+ emu_jedec_be_52_size = 32 * 1024;
+ emu_jedec_be_d8_size = 64 * 1024;
+ emu_jedec_ce_60_size = emu_chip_size;
+ emu_jedec_ce_c7_size = emu_chip_size;
+ msg_pdbg("Emulating Winbond W25Q64CV SPI flash chip (RDID, "
+ "SFDP)\n");
+ }
#endif
if (emu_chip == EMULATE_NONE) {
msg_perr("Invalid chip specified for emulation: %s\n", tmp);
@@ -471,15 +519,26 @@ static int emulate_spi_chip_response(unsigned int writecnt,
readarr[1] = 0x44;
break;
case JEDEC_RDID:
- if (emu_chip != EMULATE_SST_SST25VF032B)
+ switch (emu_chip) {
+ case EMULATE_SST_SST25VF032B:
+ if (readcnt > 0)
+ readarr[0] = 0xbf;
+ if (readcnt > 1)
+ readarr[1] = 0x25;
+ if (readcnt > 2)
+ readarr[2] = 0x4a;
break;
- /* Respond with SST_SST25VF032B. */
- if (readcnt > 0)
- readarr[0] = 0xbf;
- if (readcnt > 1)
- readarr[1] = 0x25;
- if (readcnt > 2)
- readarr[2] = 0x4a;
+ case EMULATE_WINBOND_W25Q64CV:
+ if (readcnt > 0)
+ readarr[0] = 0xef;
+ if (readcnt > 1)
+ readarr[1] = 0x40;
+ if (readcnt > 2)
+ readarr[2] = 0x17;
+ break;
+ default: /* ignore */
+ break;
+ }
break;
case JEDEC_RDSR:
memset(readarr, 0, readcnt);
@@ -629,6 +688,20 @@ static int emulate_spi_chip_response(unsigned int writecnt,
/* emu_jedec_ce_c7_size is emu_chip_size. */
memset(flashchip_contents, 0xff, emu_jedec_ce_c7_size);
break;
+ case JEDEC_SFDP:
+ if (emu_chip != EMULATE_WINBOND_W25Q64CV)
+ break;
+ offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3];
+ /*
+ * FIXME: There is one dummy byte (i.e. 8 clock cycles) to be
+ * transferred after the address. Since we can not observe the
+ * clock, we would need to check for appropriate writecnt and/or
+ * readcnt and recalculate the parameters below.
+ */
+ /* FIXME: this could be more sophisticated. */
+ memcpy(readarr, sfdp_table + offs,
+ min(sizeof(sfdp_table) - offs, readcnt));
+ break;
default:
/* No special response. */
break;
@@ -657,6 +730,7 @@ static int dummy_spi_send_command(struct flashctx *flash, unsigned int writecnt,
case EMULATE_ST_M25P10_RES:
case EMULATE_SST_SST25VF040_REMS:
case EMULATE_SST_SST25VF032B:
+ case EMULATE_WINBOND_W25Q64CV:
if (emulate_spi_chip_response(writecnt, readcnt, writearr,
readarr)) {
msg_pdbg("Invalid command sent to flash chip!\n");
--
1.7.1
1
0
On Thu, 9 Feb 2012 16:51:13 +0100
"Recovery.se" <info(a)recovery.se> wrote:
> Hello
>
> I'm very pleased with flashrom! Hovever we have a problem erasing.
> I can work around it by running erase (flashrom -E) sevral times and
> then flash with (flashrom -w <rom>).
>
> When I run errase the falure posision moves forward
>
> ..
> "ERASE FAILED at 0x00030000!"
> "ERASE FAILED at 0x00040000!"
> "ERASE FAILED at 0x000ef000!"
> ...
>
> Regards
> Eric Eriksson
> Recovery.se
Hello Eric,
as far as i have been educated by my colleagues this is due to faulty
flash chips and we can't do much, but stupidly retry a few times if we
notice such a behavior. We may include such functionally sometime in
the future... until then i think you need to handle it as you already
did.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0
- chips
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
print_wiki.c | 26 ++++++++++++++++----------
1 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/print_wiki.c b/print_wiki.c
index e80b7f3..28d5722 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -224,6 +224,7 @@ static void print_supported_chips_wiki(int cols)
{
int i = 0, c = 1, chipcount = 0;
const struct flashchip *f, *old = NULL;
+ unsigned int lines_per_col;
uint32_t t;
char *s;
char vmax[6];
@@ -238,9 +239,12 @@ static void print_supported_chips_wiki(int cols)
chipcount++;
}
+ /* +1 to force the resulting number of columns to be < cols */
+ lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0);
+
printf("\n== Supported chips ==\n\nTotal amount of supported "
- "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n"
- "| valign=\"top\"|\n\n%s", chipcount, chip_th);
+ "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n",
+ chipcount);
for (f = flashchips; f->name != NULL; f++, i++) {
/* Don't print generic entries. */
@@ -249,10 +253,14 @@ static void print_supported_chips_wiki(int cols)
!strncmp(f->name, "unknown", 7))
continue;
+ if ((i % lines_per_col) == 0)
+ printf("| valign=\"top\"|\n\n%s", chip_th);
+
/* Alternate colors if the vendor changes. */
if (old != NULL && strcmp(old->vendor, f->vendor))
c = !c;
+ old = f;
t = f->tested;
s = flashbuses_to_text(f->bustype);
sprintf(vmin, "%0.03f", f->voltage.min / (double)1000);
@@ -276,16 +284,14 @@ static void print_supported_chips_wiki(int cols)
f->voltage.min ? vmax : "N/A");
free(s);
- /* Split table into 'cols' columns. */
- if (i >= (chipcount / cols + 1)) {
- printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th);
- i = 0;
- }
-
- old = f;
+ if (((i % lines_per_col) + 1) == lines_per_col)
+ printf("\n|}\n\n");
}
- printf("\n|}\n\n|}\n");
+ /* end inner table if it did not fill the last column fully */
+ if (((i % lines_per_col)) > 0)
+ printf("\n|}\n\n");
+ printf("\n\n|}\n");
}
/* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */
--
1.7.1
1
0
- boards
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
print_wiki.c | 26 ++++++++++++++++----------
1 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/print_wiki.c b/print_wiki.c
index b9fed47..e80b7f3 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -134,11 +134,12 @@ static void print_supported_chipsets_wiki(int cols)
static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
const struct board_info boards[])
{
- int i, j, k = 0, color = 1;
+ int i, k = 0, color = 1;
int num_notes = 0;
char *notes = calloc(1, 1);
const struct board_match *b = board_matches;
unsigned int boardcount = 0, boardcount_good = 0, boardcount_bad = 0;
+ unsigned int lines_per_col;
char tmp[900 + 1];
for (i = 0; boards[i].vendor != NULL; i++) {
@@ -149,12 +150,17 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
boardcount++;
}
+ /* +1 to force the resulting number of columns to be < cols */
+ lines_per_col = boardcount / cols + ((boardcount%cols) > 0 ? 1 : 0);
+
printf("\n\nTotal amount of supported %s: '''%d'''. "
"Not yet supported (i.e., known-bad): '''%d'''.\n\n"
- "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s",
- devicetype, boardcount_good, boardcount_bad, board_th);
+ "{| border=\"0\" valign=\"top\"\n",
+ devicetype, boardcount_good, boardcount_bad);
- for (i = 0, j = 0; boards[i].vendor != NULL; i++, j++) {
+ for (i = 0; boards[i].vendor != NULL; i++) {
+ if ((i % lines_per_col) == 0)
+ printf("| valign=\"top\"|\n\n%s", board_th);
/* Alternate colors if the vendor changes. */
if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor))
@@ -190,14 +196,14 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
printf("\n");
}
- /* Split table in 'cols' columns. */
- if (j >= (boardcount / cols + 1)) {
- printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th);
- j = 0;
- }
+ if (((i % lines_per_col) + 1) == lines_per_col)
+ printf("\n|}\n\n");
}
- printf("\n|}\n\n|}\n");
+ /* end inner table if it did not fill the last column fully */
+ if (((i % lines_per_col)) > 0)
+ printf("\n|}\n\n");
+ printf("\n\n|}\n");
if (num_notes > 0)
printf("\n<small>\n%s</small>\n", notes);
--
1.7.1
1
0
for
- chipsets
---
i noticed that the chipset columns were not uniformly divided at all
and looked at the code in more detail... out came this series of
patches that changes all three major sections of the wiki page
similarly (hopefully to the better) and it split respectively for
easier reviewing. getting this right is not trivial due to the
possible corner cases... and it makes one cry when aware of real
programming languages ;)
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
print_wiki.c | 36 +++++++++++++++++++++++-------------
1 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/print_wiki.c b/print_wiki.c
index 58f1612..b9fed47 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -91,18 +91,26 @@ wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
static void print_supported_chipsets_wiki(int cols)
{
- int i, j, enablescount = 0, color = 1;
+ int enablescount = 0, color = 1;
+ int i;
+ unsigned int lines_per_col;
const struct penable *e;
for (e = chipset_enables; e->vendor_name != NULL; e++)
enablescount++;
+ /* +1 to force the resulting number of columns to be < cols */
+ lines_per_col = enablescount / cols + ((enablescount%cols) > 0 ? 1 : 0);
+
printf("\n== Supported chipsets ==\n\nTotal amount of supported "
- "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n| "
- "valign=\"top\"|\n\n%s", enablescount, chipset_th);
+ "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n",
+ enablescount);
e = chipset_enables;
- for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) {
+ for (i = 0; e[i].vendor_name != NULL; i++) {
+ if ((i % lines_per_col) == 0)
+ printf("| valign=\"top\"|\n\n%s", chipset_th);
+
/* Alternate colors if the vendor changes. */
if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name))
color = !color;
@@ -113,30 +121,32 @@ static void print_supported_chipsets_wiki(int cols)
e[i].vendor_id, e[i].device_id,
(e[i].status == OK) ? "{{OK}}" : "{{?3}}");
- /* Split table in 'cols' columns. */
- if (j >= (enablescount / cols + 1)) {
- printf("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th);
- j = 0;
- }
+ if (((i % lines_per_col) + 1) == lines_per_col)
+ printf("\n|}\n\n");
}
- printf("\n|}\n\n|}\n");
+ /* end inner table if it did not fill the last column fully */
+ if (((i % lines_per_col)) > 0)
+ printf("\n|}\n\n");
+ printf("\n\n|}\n");
}
static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
const struct board_info boards[])
{
- int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1;
+ int i, j, k = 0, color = 1;
int num_notes = 0;
char *notes = calloc(1, 1);
- char tmp[900 + 1];
const struct board_match *b = board_matches;
+ unsigned int boardcount = 0, boardcount_good = 0, boardcount_bad = 0;
+ char tmp[900 + 1];
for (i = 0; boards[i].vendor != NULL; i++) {
if (boards[i].working == OK)
boardcount_good++;
if (boards[i].working == BAD)
boardcount_bad++;
+ boardcount++;
}
printf("\n\nTotal amount of supported %s: '''%d'''. "
@@ -181,7 +191,7 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
}
/* Split table in 'cols' columns. */
- if (j >= ((boardcount_good + boardcount_bad) / cols + 1)) {
+ if (j >= (boardcount / cols + 1)) {
printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th);
j = 0;
}
--
1.7.1
1
0
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values.
Because all lines specifying supported boards and laptops were touched
anyway, this patch also re-indents them.
---
TODO: change other occurrences to use it. wanted to get feedack first.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
flash.h | 7 +-
print.c | 869 +++++++++++++++++++++++++++++-----------------------------
print_wiki.c | 7 +-
programmer.h | 6 +-
4 files changed, 446 insertions(+), 443 deletions(-)
diff --git a/flash.h b/flash.h
index 0dac13d..4d0d79b 100644
--- a/flash.h
+++ b/flash.h
@@ -251,8 +251,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, i
int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename);
int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename);
-#define OK 0
-#define NT 1 /* Not tested */
+enum test_state {
+ OK = 0,
+ NT = 1, /* Not tested */
+ BAD
+};
/* Something happened that shouldn't happen, but we can go on. */
#define ERROR_NONFATAL 0x100
diff --git a/print.c b/print.c
index f0c701e..6969551 100644
--- a/print.c
+++ b/print.c
@@ -560,428 +560,427 @@ void print_supported(void)
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_known[] = {
#if defined(__i386__) || defined(__x86_64__)
- B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
- B("abit", "A-S78H", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
- B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
- B("abit", "AV8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
- B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
- B("abit", "BM6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
- B("abit", "Fatal1ty F-I90HD", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
- B("abit", "IC7", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
- B("abit", "IP35", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
- B("abit", "IP35 Pro", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
- B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
- B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
- B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
- B("abit", "NF-M2S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
- B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
- B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
- B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
- B("Acorp", "6A815EPD", 1, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL),
- B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
- B("agami", "Aruma", 1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL),
- B("Albatron", "PM266A Pro", 1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */
- B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
- B("AOpen", "vKM400Am-S", 1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
- B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL),
- B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL),
- B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."),
- B("ASRock", "775i65G", 1, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
- B("ASRock", "890GX Extreme3", 1, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
- B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
- B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
- B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
- B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
- B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
- B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
- B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
- B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
- B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
- B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
- B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
- B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
- B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
- B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
- B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
- B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
- B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
- B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
- B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
- B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
- B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
- B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
- B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
- B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
- B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
- B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
- B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
- B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."),
- B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
- B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
- B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
- B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL),
- B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
- B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
- B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
- B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
- B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
- B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL),
- B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
- B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
- B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
- B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
- B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
- B("ASUS", "KFSN4-DRE/SAS", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
- B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
- B("ASUS", "M2A-VM (HDMI)", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
- B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
- B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
- B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
- B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
- B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
- B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
- B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
- B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
- B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
- B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
- B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
- B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
- B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
- B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
- B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
- B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
- B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
- B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
- B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
- B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
- B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
- B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."),
- B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
- B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
- B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
- B("ASUS", "P2B-F", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
- B("ASUS", "P2B-N", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
- B("ASUS", "P2E-M", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
- B("ASUS", "P2L97-S", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
- B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
- B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
- B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
- B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL),
- B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL),
- B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
- B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL),
- B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
- B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"),
- B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
- B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
- B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
- B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
- B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
- B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL),
- B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."),
- B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL),
- B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
- B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),
- B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."),
- B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL),
- B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
- B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
- B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."),
- B("ASUS", "P5K-V", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
- B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
- B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
- B("ASUS", "P5KPL-CM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
- B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
- B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
- B("ASUS", "P5LD2", 0, NULL, "Untested board enable."),
- B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."),
- B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
- B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."),
- B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."),
- B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
- B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
- B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
- B("ASUS", "P5N7A-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
- B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
- B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
- B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
- B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
- B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
- B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
- B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL),
- B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL),
- B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
- B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
- B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
- B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
- B("Bifferos", "Bifferboard", 1, "http://bifferos.co.uk/", NULL),
- B("Biostar", "N68S3+", 1, NULL, NULL),
- B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
- B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
- B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
- B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
- B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
- B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
- B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
- B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
- B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),
- B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL),
- B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL),
- B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL),
- B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL),
- B("Elitegroup", "K7SEM (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL),
- B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),
- B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
- B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL),
- B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
- B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL),
- B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
- B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL),
- B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
- B("EPoX", "EP-8NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
- B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
- B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
- B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL),
- B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL),
- B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
- B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
- B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
- B("Foxconn", "A6VMX", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
- B("Foxconn", "P4M800P7MA-RS2", 1, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL),
- B("Freetech", "P6F91i", 1, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL),
- B("Fujitsu-Siemens", "ESPRIMO P5915", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."),
- B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL),
- B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
- B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
- B("GIGABYTE", "GA-6IEM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
- B("GIGABYTE", "GA-6VXE7+", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
- B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
- B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
- B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
- B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
- B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
- B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
- B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
- B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
- B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
- B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
- B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
- B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
- B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
- B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
- B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
- B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
- B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
- B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
- B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
- B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
- B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
- B("GIGABYTE", "GA-K8NS Pro-939", 0, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
- B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
- B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
- B("GIGABYTE", "GA-M720-US3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
- B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
- B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
- B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
- B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
- B("GIGABYTE", "GA-MA780G-UD3H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
- B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
- B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */
- B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
- B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
- B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
- B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
- B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
- B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
- B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL),
- B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL),
- B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
- B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
- B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL),
- B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL),
- B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
- B("HP", "ProLiant N40L", 1, NULL, NULL),
- B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
- B("HP", "dc7800", 0, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
- B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
- B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
- B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
- B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."),
- B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL),
- B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
- B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL),
- B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
- B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
- B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
- B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
- B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
- B("Intel", "EP80759", 1, NULL, NULL),
- B("Intel", "Foxhollow", 1, NULL, "Intel reference board."),
- B("Intel", "Greencity", 1, NULL, "Intel reference board."),
- B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
- B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL),
- B("Jetway", "J-7BXAN", 1, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
- B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL),
- B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL),
- B("Lanner", "EM-8510C", 1, NULL, NULL),
- B("Lex", "CV700A", 1, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
- B("Mitac", "6513WU", 1, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL),
- B("MSC", "Q7-TCTC", 1, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
- B("MSI", "MS-6153", 1, "http://www.msi.com/product/mb/MS-6153.html", NULL),
- B("MSI", "MS-6156", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL),
- B("MSI", "MS-6163 (MS-6163 Pro)",1, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
- B("MSI", "MS-6178", 0, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
- B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
- B("MSI", "MS-6391 (845 Pro4)", 1, "http://www.msi.com/product/mb/845-Pro4.html", NULL),
- B("MSI", "MS-6561 (745 Ultra)", 1, "http://www.msi.com/product/mb/745-Ultra.html", NULL),
- B("MSI", "MS-6566 (845 Ultra-C)",1, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
- B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/product/mb/K7N2.html", NULL),
- B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."),
- B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
- B("MSI", "MS-6702E (K8T Neo2-F)",1, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
- B("MSI", "MS-6712 (KT4V)", 1, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
- B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 1, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
- B("MSI", "MS-7005 (651M-L)", 1, "http://www.msi.com/product/mb/651M-L.html", NULL),
- B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
- B("MSI", "MS-7046", 1, "http://www.heimir.de/ms7046/", NULL),
- B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
- B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
- B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
- B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
- B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL),
- B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
- B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/product/mb/PM8M3-V.html", NULL),
- B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
- B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
- B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
- B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
- B("MSI", "MS-7309 (K9N6PGM2-V2)", 1, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
- B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
- B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
- B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
- B("MSI", "MS-7369 (K9N Neo V2)", 1, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
- B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
- B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
- B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
- B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL),
- B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
- B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL),
- B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
- B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
- B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
- B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
- B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
- B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
- B("Nokia", "IP530", 1, NULL, NULL),
- B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL),
- B("PCCHIPS ", "M863G (V5.1A)", 1, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL),
- B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL),
- B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL),
- B("PC Engines", "Alix.2c3", 1, "http://pcengines.ch/alix2c3.htm", NULL),
- B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL),
- B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL),
- B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL),
- B("PC Engines", "Alix.6f2", 1, "http://pcengines.ch/alix6f2.htm", NULL),
- B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL),
- B("Portwell", "PEB-4700VLA", 1, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
- B("RCA", "RM4100", 1, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
- B("Samsung", "Polaris 32", 1, NULL, NULL),
- B("Shuttle", "AK31", 1, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
- B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
- B("Shuttle", "AV11V30", 1, NULL, NULL),
- B("Shuttle", "AV18E2", 1, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
- B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
- B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
- B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
- B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
- B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
- B("Soyo", "SY-6BA+ III", 1, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
- B("Soyo", "SY-7VCA", 1, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL),
- B("Sun", "Blade x6250", 1, "http://www.sun.com/servers/blades/x6250/", NULL),
- B("Sun", "Fire x4150", 0, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."),
- B("Sun", "Fire x4200", 0, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."),
- B("Sun", "Fire x4540", 0, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."),
- B("Sun", "Fire x4600", 0, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
- B("Sun", "Ultra 40 M2", 1, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL),
- B("Supermicro", "H8QC8", 1, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
- B("Supermicro", "X5DP8-G2", 1, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
- B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
- B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL),
- B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
- B("Supermicro", "X8DTE-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL),
- B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
- B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
- B("Supermicro", "X8DTT-HIBQF", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
- B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
- B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
- B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
- B("Supermicro", "X9SCA-F", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
- B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
- B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL),
- B("Thomson", "IP1000", 1, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
- B("TriGem", "Anaheim-3", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL),
- B("TriGem", "Lomita", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL),
- B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
- B("Tyan", "S1846 (Tsunami ATX)", 1, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
- B("Tyan", "S2466 (Tiger MPX)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
- B("Tyan", "S2498 (Tomcat K7M)", 1, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
- B("Tyan", "S2723 (Tiger i7501)", 1, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
- B("Tyan", "S2881 (Thunder K8SR)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
- B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
- B("Tyan", "S2882-D (Thunder K8SD Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
- B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
- B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
- B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
- B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
- B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL),
- B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL),
- B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL),
- B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
- B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),
- B("Tyan", "S5180 (Toledo i965R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
- B("Tyan", "S5191 (Toledo i3000R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
- B("Tyan", "S5197 (Toledo i3010W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
- B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
- B("Tyan", "S5211-1U (Toledo i3200R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
- B("Tyan", "S5220 (Toledo q35T)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
- B("Tyan", "S5375 (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
- B("Tyan", "S5376 (Tempest i5100W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."),
- B("Tyan", "S5377 (Tempest i5100T)", 1, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL),
- B("Tyan", "S5382 (Tempest i5000PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
- B("Tyan", "S5397 (Tempest i5400PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
- B("VIA", "EPIA M/MII/...", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */
- B("VIA", "EPIA SP", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
- B("VIA", "EPIA-CN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
- B("VIA", "EPIA EK", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL),
- B("VIA", "EPIA-EX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
- B("VIA", "EPIA-LN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
- B("VIA", "EPIA-M700", 1, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL),
- B("VIA", "EPIA-N/NL", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */
- B("VIA", "EPIA-NX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
- B("VIA", "NAB74X0", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
- B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL),
- B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL),
- B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
- B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL),
- B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL),
- B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL),
+ B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
+ B("abit", "A-S78H", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
+ B("abit", "AN-M2", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
+ B("abit", "AV8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
+ B("abit", "AX8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
+ B("abit", "BM6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
+ B("abit", "Fatal1ty F-I90HD", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
+ B("abit", "IC7", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
+ B("abit", "IP35", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
+ B("abit", "IP35 Pro", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL),
+ B("abit", "IS-10", BAD, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
+ B("abit", "KN8 Ultra", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
+ B("abit", "NF-M2 nView", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
+ B("abit", "NF-M2S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
+ B("abit", "NF7-S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL),
+ B("abit", "VA6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
+ B("abit", "VT6X4", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL),
+ B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL),
+ B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
+ B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL),
+ B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */
+ B("AOpen", "i945GMx-VFX", OK, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
+ B("AOpen", "vKM400Am-S", OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
+ B("Artec Group","DBE61", OK, "http://wiki.thincan.org/DBE61", NULL),
+ B("Artec Group","DBE62", OK, "http://wiki.thincan.org/DBE62", NULL),
+ B("ASI", "MB-5BLMP", OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."),
+ B("ASRock", "775i65G", OK, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
+ B("ASRock", "890GX Extreme3", OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
+ B("ASRock", "939A785GMH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
+ B("ASRock", "A330GC", OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
+ B("ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
+ B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
+ B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
+ B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
+ B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
+ B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
+ B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
+ B("ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
+ B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
+ B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
+ B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
+ B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
+ B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
+ B("ASUS", "A7V133", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
+ B("ASUS", "A7V333", OK, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
+ B("ASUS", "A7V400-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
+ B("ASUS", "A7V600-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
+ B("ASUS", "A7V8X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
+ B("ASUS", "A7V8X-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
+ B("ASUS", "A7V8X-MX SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
+ B("ASUS", "A7V8X-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
+ B("ASUS", "A8M2N-LA (NodusM3-GL8E)", OK, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
+ B("ASUS", "A8N-E", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
+ B("ASUS", "A8N-LA (Nagami-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
+ B("ASUS", "A8N-SLI", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
+ B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Untested board enable."),
+ B("ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
+ B("ASUS", "A8N-VM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
+ B("ASUS", "A8N-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
+ B("ASUS", "A8NE-FM/S", OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL),
+ B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
+ B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
+ B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
+ B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
+ B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
+ B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL),
+ B("ASUS", "K8N", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
+ B("ASUS", "K8V", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
+ B("ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
+ B("ASUS", "K8V-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
+ B("ASUS", "K8V-X SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
+ B("ASUS", "KFSN4-DRE/SAS", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
+ B("ASUS", "M2A-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
+ B("ASUS", "M2A-VM (HDMI)", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
+ B("ASUS", "M2N32-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
+ B("ASUS", "M2N-E", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
+ B("ASUS", "M2N-E SLI", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
+ B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
+ B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
+ B("ASUS", "M2NPV-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
+ B("ASUS", "M2V", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
+ B("ASUS", "M2V-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
+ B("ASUS", "M3A", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
+ B("ASUS", "M3A76-CM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
+ B("ASUS", "M3A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
+ B("ASUS", "M3N78-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
+ B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
+ B("ASUS", "M4A785TD-M EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
+ B("ASUS", "M4A785TD-V EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
+ B("ASUS", "M4A78LT-M LE", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
+ B("ASUS", "M4A79T Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
+ B("ASUS", "M4A87TD/USB3", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
+ B("ASUS", "M4A89GTD PRO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
+ B("ASUS", "M4N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
+ B("ASUS", "M5A99X EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
+ B("ASUS", "MEW-AM", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("ASUS", "MEW-VM", BAD, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("ASUS", "OPLX-M", NT, NULL, "Untested board enable."),
+ B("ASUS", "P2B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
+ B("ASUS", "P2B-D", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
+ B("ASUS", "P2B-DS", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
+ B("ASUS", "P2B-F", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
+ B("ASUS", "P2B-N", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
+ B("ASUS", "P2E-M", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
+ B("ASUS", "P2L97-S", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
+ B("ASUS", "P3B-F", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("ASUS", "P4B266", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
+ B("ASUS", "P4B266-LM", OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
+ B("ASUS", "P4B533-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
+ B("ASUS", "P4C800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL),
+ B("ASUS", "P4GV-LA (Guppy)", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL),
+ B("ASUS", "P4P800", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
+ B("ASUS", "P4P800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL),
+ B("ASUS", "P4P800-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
+ B("ASUS", "P4SC-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"),
+ B("ASUS", "P4SD-LA", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
+ B("ASUS", "P4S533-X", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
+ B("ASUS", "P4S800-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
+ B("ASUS", "P5A", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
+ B("ASUS", "P5B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
+ B("ASUS", "P5B-Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL),
+ B("ASUS", "P5BV-M", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."),
+ B("ASUS", "P5GC-MX/1333", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL),
+ B("ASUS", "P5GD1 Pro", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
+ B("ASUS", "P5GD1-VM/S", OK, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),
+ B("ASUS", "P5GD1(-VM)", NT, NULL, "Untested board enable."),
+ B("ASUS", "P5GD2 Premium", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL),
+ B("ASUS", "P5GDC Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
+ B("ASUS", "P5GDC-V Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
+ B("ASUS", "P5GD2/C variants", NT, NULL, "Untested board enable."),
+ B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
+ B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
+ B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
+ B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
+ B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
+ B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
+ B("ASUS", "P5LD2", NT, NULL, "Untested board enable."),
+ B("ASUS", "P5LP-LE (Lithium-UL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."),
+ B("ASUS", "P5LP-LE (Epson OEM)", OK, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
+ B("ASUS", "P5LP-LE", BAD, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."),
+ B("ASUS", "P5N-D", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
+ B("ASUS", "P5N-E SLI", NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
+ B("ASUS", "P5N32-E SLI", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
+ B("ASUS", "P5N7A-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
+ B("ASUS", "P5ND2-SLI Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
+ B("ASUS", "P5PE-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
+ B("ASUS", "P5QPL-AM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
+ B("ASUS", "P5VD1-X", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
+ B("ASUS", "P6T SE", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
+ B("ASUS", "P6T Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
+ B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL),
+ B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL),
+ B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
+ B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
+ B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
+ B("BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
+ B("Bifferos", "Bifferboard", OK, "http://bifferos.co.uk/", NULL),
+ B("Biostar", "N68S3+", OK, NULL, NULL),
+ B("Biostar", "M6TBA", BAD, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("Biostar", "M7NCD Pro", OK, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
+ B("Biostar", "P4M80-M4", OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
+ B("Biostar", "TA780G M2+", OK, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
+ B("Boser", "HS-6637", BAD, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
+ B("Congatec", "conga-X852", OK, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
+ B("Dell", "OptiPlex GX1", OK, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
+ B("Dell", "PowerEdge 1850", OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
+ B("DFI", "855GME-MGF", BAD, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
+ B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),
+ B("Elitegroup", "GeForce6100SM-M ", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL),
+ B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL),
+ B("Elitegroup", "K7S5A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL),
+ B("Elitegroup", "K7S6A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL),
+ B("Elitegroup", "K7SEM (V1.0A)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL),
+ B("Elitegroup", "K7VTA3", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),
+ B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
+ B("Elitegroup", "P4VXMS (V1.0A)", OK, NULL, NULL),
+ B("Elitegroup", "P6IWP-Fe", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
+ B("Elitegroup", "P6VAP-A+", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL),
+ B("Elitegroup", "RS485M-M", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
+ B("Emerson", "ATCA-7360", OK, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL),
+ B("EPoX", "EP-8K5A2", OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
+ B("EPoX", "EP-8NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
+ B("EPoX", "EP-9NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
+ B("EPoX", "EP-8RDA3+", OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
+ B("EPoX", "EP-BX3", OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL),
+ B("EVGA", "132-CK-NF78", OK, "http://www.evga.com/articles/385.asp", NULL),
+ B("EVGA", "270-WS-W555-A2 (Classified SR-2)", OK, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
+ B("FIC", "VA-502", BAD, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
+ B("Foxconn", "6150K8MD-8EKRSH", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
+ B("Foxconn", "A6VMX", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL),
+ B("Foxconn", "P4M800P7MA-RS2", OK, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL),
+ B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL),
+ B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."),
+ B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL),
+ B("GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
+ B("GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
+ B("GIGABYTE", "GA-6IEM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
+ B("GIGABYTE", "GA-6VXE7+", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
+ B("GIGABYTE", "GA-6ZMA", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
+ B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
+ B("GIGABYTE", "GA-770TA-UD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
+ B("GIGABYTE", "GA-7DXR", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
+ B("GIGABYTE", "GA-7VT600", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
+ B("GIGABYTE", "GA-7ZM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
+ B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
+ B("GIGABYTE", "GA-8I945GZME-RH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
+ B("GIGABYTE", "GA-8IP775", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
+ B("GIGABYTE", "GA-8IRML", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
+ B("GIGABYTE", "GA-8PE667 Ultra 2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
+ B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
+ B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
+ B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
+ B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
+ B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
+ B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
+ B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
+ B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
+ B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
+ B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
+ B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
+ B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
+ B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
+ B("GIGABYTE", "GA-M720-US3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
+ B("GIGABYTE", "GA-MA69VM-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
+ B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
+ B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
+ B("GIGABYTE", "GA-MA770T-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
+ B("GIGABYTE", "GA-MA780G-UD3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
+ B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
+ B("GIGABYTE", "GA-MA78GM-S2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */
+ B("GIGABYTE", "GA-MA78GPM-DS2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
+ B("GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
+ B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
+ B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
+ B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
+ B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
+ B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL),
+ B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", OK, NULL, NULL),
+ B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
+ B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
+ B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL),
+ B("HP", "ProLiant DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL),
+ B("HP", "ProLiant DL165 G6", OK, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
+ B("HP", "ProLiant N40L", OK, NULL, NULL),
+ B("HP", "Puffer2-UL8E", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
+ B("HP", "dc7800", BAD, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
+ B("HP", "Vectra VL400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
+ B("HP", "Vectra VL420 SFF", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
+ B("HP", "xw4400 (0A68h)", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
+ B("HP", "xw9400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."),
+ B("IBASE", "MB899", OK, "http://www.ibase-i.com.tw/2009/mb899.html", NULL),
+ B("IBM", "x3455", OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
+ B("IEI", "PICOe-9452", OK, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL),
+ B("Intel", "D201GLY", OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
+ B("Intel", "D425KT", BAD, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
+ B("Intel", "D865GLC", BAD, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
+ B("Intel", "DG45ID", BAD, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
+ B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
+ B("Intel", "EP80759", OK, NULL, NULL),
+ B("Intel", "Foxhollow", OK, NULL, "Intel reference board."),
+ B("Intel", "Greencity", OK, NULL, "Intel reference board."),
+ B("Intel", "SE440BX-2", BAD, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
+ B("IWILL", "DK8-HTX", OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL),
+ B("Jetway", "J-7BXAN", OK, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
+ B("Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL),
+ B("Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL),
+ B("Lanner", "EM-8510C", OK, NULL, NULL),
+ B("Lex", "CV700A", OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
+ B("Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL),
+ B("MSC", "Q7-TCTC", OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
+ B("MSI", "MS-6153", OK, "http://www.msi.com/product/mb/MS-6153.html", NULL),
+ B("MSI", "MS-6156", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL),
+ B("MSI", "MS-6163 (MS-6163 Pro)", OK, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
+ B("MSI", "MS-6178", BAD, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
+ B("MSI", "MS-6330 (K7T Turbo)", OK, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
+ B("MSI", "MS-6391 (845 Pro4)", OK, "http://www.msi.com/product/mb/845-Pro4.html", NULL),
+ B("MSI", "MS-6561 (745 Ultra)", OK, "http://www.msi.com/product/mb/745-Ultra.html", NULL),
+ B("MSI", "MS-6566 (845 Ultra-C)", OK, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
+ B("MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/product/mb/K7N2.html", NULL),
+ B("MSI", "MS-6577 (Xenon)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."),
+ B("MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
+ B("MSI", "MS-6702E (K8T Neo2-F)", OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
+ B("MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
+ B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
+ B("MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/product/mb/651M-L.html", NULL),
+ B("MSI", "MS-7025 (K8N Neo2 Platinum)", OK, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
+ B("MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL),
+ B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
+ B("MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
+ B("MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
+ B("MSI", "MS-7142 (K8MM-V)", OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
+ B("MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL),
+ B("MSI", "MS-7207 (K8NGM2-L)", OK, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
+ B("MSI", "MS-7211 (PM8M3-V)", OK, "http://www.msi.com/product/mb/PM8M3-V.html", NULL),
+ B("MSI", "MS-7236 (945PL Neo3)", OK, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
+ B("MSI", "MS-7253 (K9VGM-V)", OK, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
+ B("MSI", "MS-7255 (P4M890M)", OK, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
+ B("MSI", "MS-7260 (K9N Neo PCB 1.0)", BAD, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
+ B("MSI", "MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
+ B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
+ B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
+ B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
+ B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
+ B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
+ B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
+ B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
+ B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL),
+ B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
+ B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL),
+ B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("MSI", "MS-7640 (890FXA-GD70)", OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
+ B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
+ B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
+ B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
+ B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
+ B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
+ B("Nokia", "IP530", OK, NULL, NULL),
+ B("PCCHIPS ", "M598LMR (V9.0)", OK, NULL, NULL),
+ B("PCCHIPS ", "M863G (V5.1A)", OK, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL),
+ B("PC Engines", "Alix.1c", OK, "http://pcengines.ch/alix1c.htm", NULL),
+ B("PC Engines", "Alix.2c2", OK, "http://pcengines.ch/alix2c2.htm", NULL),
+ B("PC Engines", "Alix.2c3", OK, "http://pcengines.ch/alix2c3.htm", NULL),
+ B("PC Engines", "Alix.2d3", OK, "http://pcengines.ch/alix2d3.htm", NULL),
+ B("PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL),
+ B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL),
+ B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL),
+ B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL),
+ B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
+ B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
+ B("Samsung", "Polaris 32", OK, NULL, NULL),
+ B("Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
+ B("Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
+ B("Shuttle", "AV11V30", OK, NULL, NULL),
+ B("Shuttle", "AV18E2", OK, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
+ B("Shuttle", "FD37", OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
+ B("Shuttle", "FH67", OK, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
+ B("Shuttle", "FN25", OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
+ B("Shuttle", "X50/X50(B)", OK, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
+ B("Soyo", "SY-5VD", BAD, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("Soyo", "SY-6BA+ III", OK, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
+ B("Soyo", "SY-7VCA", OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL),
+ B("Sun", "Blade x6250", OK, "http://www.sun.com/servers/blades/x6250/", NULL),
+ B("Sun", "Fire x4150", BAD, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."),
+ B("Sun", "Fire x4200", BAD, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."),
+ B("Sun", "Fire x4540", BAD, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."),
+ B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
+ B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL),
+ B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
+ B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
+ B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
+ B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL),
+ B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
+ B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL),
+ B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
+ B("Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
+ B("Supermicro", "X8DTT-HIBQF", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
+ B("Supermicro", "X8DTU-6TF+", BAD, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Supermicro", "X8DTU-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
+ B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
+ B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
+ B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
+ B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
+ B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL),
+ B("Thomson", "IP1000", OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
+ B("TriGem", "Anaheim-3", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL),
+ B("TriGem", "Lomita", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL),
+ B("Tyan", "S5375-1U (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
+ B("Tyan", "S1846 (Tsunami ATX)", OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
+ B("Tyan", "S2466 (Tiger MPX)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
+ B("Tyan", "S2498 (Tomcat K7M)", OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
+ B("Tyan", "S2723 (Tiger i7501)", OK, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
+ B("Tyan", "S2881 (Thunder K8SR)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
+ B("Tyan", "S2882 (Thunder K8S Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
+ B("Tyan", "S2882-D (Thunder K8SD Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
+ B("Tyan", "S2891 (Thunder K8SRE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
+ B("Tyan", "S2892 (Thunder K8SE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
+ B("Tyan", "S2895 (Thunder K8WE)", OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
+ B("Tyan", "S2912 (Thunder n3600R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
+ B("Tyan", "S2915 (Thunder n6650W)", OK, "http://tyan.com/product_board_detail.aspx?pid=163", NULL),
+ B("Tyan", "S2915-E (Thunder n6650W)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL),
+ B("Tyan", "S2933 (Thunder n3600S)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL),
+ B("Tyan", "S3095 (Tomcat i945GM)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
+ B("Tyan", "S3992 (Thunder h2000M)", OK, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),
+ B("Tyan", "S5180 (Toledo i965R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
+ B("Tyan", "S5191 (Toledo i3000R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
+ B("Tyan", "S5197 (Toledo i3010W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
+ B("Tyan", "S5211 (Toledo i3210W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
+ B("Tyan", "S5211-1U (Toledo i3200R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
+ B("Tyan", "S5220 (Toledo q35T)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
+ B("Tyan", "S5375 (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
+ B("Tyan", "S5376 (Tempest i5100W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."),
+ B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL),
+ B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
+ B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
+ B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */
+ B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
+ B("VIA", "EPIA-CN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
+ B("VIA", "EPIA EK", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL),
+ B("VIA", "EPIA-EX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
+ B("VIA", "EPIA-LN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
+ B("VIA", "EPIA-M700", OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL),
+ B("VIA", "EPIA-N/NL", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */
+ B("VIA", "EPIA-NX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL),
+ B("VIA", "NAB74X0", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
+ B("VIA", "pc2500e", OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL),
+ B("VIA", "PC3500G", OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL),
+ B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL),
+ B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL),
+ B("ZOTAC", "GeForce 8200", OK, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL),
+ B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ZOTAC", "ZBOX HD-ID11", OK, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL),
#endif
{},
@@ -990,19 +989,19 @@ const struct board_info boards_known[] = {
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info laptops_known[] = {
#if defined(__i386__) || defined(__x86_64__)
- B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL),
- B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
- B("ASUS", "A8Jm", 1, NULL, NULL),
- B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
- B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
- B("Clevo", "P150HM", 0, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
- B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
- B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
- B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
- B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
- B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
- B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
- B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL),
+ B("Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL),
+ B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
+ B("ASUS", "A8Jm", OK, NULL, NULL),
+ B("ASUS", "Eee PC 701 4G", BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
+ B("ASUS", "M6Ne", NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
+ B("Clevo", "P150HM", BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("Dell", "Latitude CPi A366XT", BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
+ B("HP/Compaq", "nx9005", BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
+ B("HP/Compaq", "nx9010", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
+ B("IBM/Lenovo", "Thinkpad T40p", BAD, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
+ B("IBM/Lenovo", "Thinkpad T410s", BAD, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
+ B("IBM/Lenovo", "240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
+ B("Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL),
#endif
{},
diff --git a/print_wiki.c b/print_wiki.c
index a8c9d76..58f1612 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -133,9 +133,9 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
const struct board_match *b = board_matches;
for (i = 0; boards[i].vendor != NULL; i++) {
- if (boards[i].working)
+ if (boards[i].working == OK)
boardcount_good++;
- else
+ if (boards[i].working == BAD)
boardcount_bad++;
}
@@ -168,7 +168,8 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
b[k].lb_vendor ? b[k].lb_vendor : "",
b[k].lb_vendor ? ":" : "",
b[k].lb_vendor ? b[k].lb_part : "",
- (boards[i].working) ? "OK" : "No");
+ (boards[i].working == OK) ? "OK" :
+ (boards[i].working == NT) ? "?3" : "No");
if (boards[i].note) {
printf("<sup>%d</sup>\n", num_notes + 1);
diff --git a/programmer.h b/programmer.h
index 240e1af..64efb40 100644
--- a/programmer.h
+++ b/programmer.h
@@ -192,7 +192,7 @@ extern const struct board_match board_matches[];
struct board_info {
const char *vendor;
const char *name;
- const int working;
+ enum test_state working;
#ifdef CONFIG_PRINT_WIKI
const char *url;
const char *note;
@@ -217,7 +217,7 @@ extern struct pci_dev *pcidev_dev;
struct pcidev_status {
uint16_t vendor_id;
uint16_t device_id;
- int status;
+ enum test_state status;
const char *vendor_name;
const char *device_name;
};
@@ -415,7 +415,7 @@ extern const struct pcidev_status ata_hpt[];
struct usbdev_status {
uint16_t vendor_id;
uint16_t device_id;
- int status;
+ enum test_state status;
const char *vendor_name;
const char *device_name;
};
--
1.7.1
1
0
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
ft2232_spi.c | 13 -------
print.c | 15 ++++++++
print_wiki.c | 106 +++++++++++++++++++++++++++++++++++++++++++---------------
3 files changed, 94 insertions(+), 40 deletions(-)
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 122866f..ec4934e 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -435,17 +435,4 @@ static int ft2232_spi_send_command(struct flashctx *flash,
return failed ? -1 : 0;
}
-void print_supported_usbdevs(const struct usbdev_status *devs)
-{
- int i;
-
- msg_pinfo("USB devices:\n");
- for (i = 0; devs[i].vendor_name != NULL; i++) {
- msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
- devs[i].device_name, devs[i].vendor_id,
- devs[i].device_id,
- (devs[i].status == NT) ? " (untested)" : "");
- }
-}
-
#endif
diff --git a/print.c b/print.c
index 1fdeac7..f0c701e 100644
--- a/print.c
+++ b/print.c
@@ -422,6 +422,21 @@ static void print_supported_boards_helper(const struct board_info *boards,
}
#endif
+#if CONFIG_FT2232_SPI == 1
+void print_supported_usbdevs(const struct usbdev_status *devs)
+{
+ int i;
+
+ msg_pinfo("USB devices:\n");
+ for (i = 0; devs[i].vendor_name != NULL; i++) {
+ msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name,
+ devs[i].device_name, devs[i].vendor_id,
+ devs[i].device_id,
+ (devs[i].status == NT) ? " (untested)" : "");
+ }
+}
+#endif
+
void print_supported(void)
{
print_supported_chips();
diff --git a/print_wiki.c b/print_wiki.c
index 377154d..a8c9d76 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -72,10 +72,7 @@ static const char chip_th[] = "{\
| Probe\n| Read\n| Erase\n| Write\n\
| align=\"center\" | Min \n| align=\"center\" | Max\n\n";
-static const char programmer_section[] = "\
-\n== Supported programmers ==\n\nThis is a list \
-of supported PCI devices flashrom can use as programmer:\n\n{| border=\"0\" \
-valign=\"top\"\n| valign=\"top\"|\n\n{| border=\"0\" style=\"font-size: \
+static const char programmer_th[] = "{| border=\"0\" style=\"font-size: \
smaller\" valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Device\n! align=\"center\" | PCI IDs\n\
! align=\"center\" | Status\n\n";
@@ -126,7 +123,7 @@ static void print_supported_chipsets_wiki(int cols)
printf("\n|}\n\n|}\n");
}
-static void wiki_helper(const char *devicetype, int cols,
+static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
const struct board_info boards[])
{
int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1;
@@ -199,10 +196,10 @@ static void wiki_helper(const char *devicetype, int cols,
static void print_supported_boards_wiki(void)
{
printf("%s", board_intro);
- wiki_helper("boards", 2, boards_known);
+ print_supported_boards_wiki_helper("boards", 2, boards_known);
printf("%s", laptop_intro);
- wiki_helper("laptops", 1, laptops_known);
+ print_supported_boards_wiki_helper("laptops", 1, laptops_known);
}
#endif
@@ -276,7 +273,16 @@ static void print_supported_chips_wiki(int cols)
/* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */
#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1
-static void print_supported_pcidevs_wiki(const struct pcidev_status *devs)
+static int count_supported_pcidevs_wiki(const struct pcidev_status *devs)
+{
+ int i = 0;
+ unsigned int count = 0;
+ for (i = 0; devs[i].vendor_name != NULL; i++)
+ count++;
+ return count;
+}
+
+static void print_supported_pcidevs_wiki_helper(const struct pcidev_status *devs)
{
int i = 0;
static int c = 0;
@@ -294,50 +300,96 @@ static void print_supported_pcidevs_wiki(const struct pcidev_status *devs)
}
#endif
-void print_supported_wiki(void)
+static void print_supported_pcidevs_wiki()
{
- time_t t = time(NULL);
+ unsigned int pci_count = 0;
- printf(wiki_header, ctime(&t), flashrom_version);
- print_supported_chips_wiki(2);
-#if CONFIG_INTERNAL == 1
- print_supported_chipsets_wiki(3);
- print_supported_boards_wiki();
+#if CONFIG_NIC3COM == 1
+ pci_count += count_supported_pcidevs_wiki(nics_3com);
+#endif
+#if CONFIG_NICREALTEK == 1
+ pci_count += count_supported_pcidevs_wiki(nics_realtek);
+#endif
+#if CONFIG_NICNATSEMI == 1
+ pci_count += count_supported_pcidevs_wiki(nics_natsemi);
+#endif
+#if CONFIG_GFXNVIDIA == 1
+ pci_count += count_supported_pcidevs_wiki(gfx_nvidia);
+#endif
+#if CONFIG_DRKAISER == 1
+ pci_count += count_supported_pcidevs_wiki(drkaiser_pcidev);
+#endif
+#if CONFIG_SATASII == 1
+ pci_count += count_supported_pcidevs_wiki(satas_sii);
+#endif
+#if CONFIG_ATAHPT == 1
+ pci_count += count_supported_pcidevs_wiki(ata_hpt);
+#endif
+#if CONFIG_NICINTEL == 1
+ pci_count += count_supported_pcidevs_wiki(nics_intel);
+#endif
+#if CONFIG_NICINTEL_SPI == 1
+ pci_count += count_supported_pcidevs_wiki(nics_intel_spi);
+#endif
+#if CONFIG_OGP_SPI == 1
+ pci_count += count_supported_pcidevs_wiki(ogp_spi);
+#endif
+#if CONFIG_SATAMV == 1
+ pci_count += count_supported_pcidevs_wiki(satas_mv);
#endif
- printf("%s", programmer_section);
+
+ printf("\n== Supported programmers ==\n\nTotal amount of supported "
+ "PCI devices flashrom can use as programmer: '''%d'''\n\n"
+ "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n",
+ pci_count);
+ printf("%s", programmer_th);
+
#if CONFIG_NIC3COM == 1
- print_supported_pcidevs_wiki(nics_3com);
+ print_supported_pcidevs_wiki_helper(nics_3com);
#endif
#if CONFIG_NICREALTEK == 1
- print_supported_pcidevs_wiki(nics_realtek);
+ print_supported_pcidevs_wiki_helper(nics_realtek);
#endif
#if CONFIG_NICNATSEMI == 1
- print_supported_pcidevs_wiki(nics_natsemi);
+ print_supported_pcidevs_wiki_helper(nics_natsemi);
#endif
#if CONFIG_GFXNVIDIA == 1
- print_supported_pcidevs_wiki(gfx_nvidia);
+ print_supported_pcidevs_wiki_helper(gfx_nvidia);
#endif
#if CONFIG_DRKAISER == 1
- print_supported_pcidevs_wiki(drkaiser_pcidev);
+ print_supported_pcidevs_wiki_helper(drkaiser_pcidev);
#endif
#if CONFIG_SATASII == 1
- print_supported_pcidevs_wiki(satas_sii);
+ print_supported_pcidevs_wiki_helper(satas_sii);
#endif
#if CONFIG_ATAHPT == 1
- print_supported_pcidevs_wiki(ata_hpt);
+ print_supported_pcidevs_wiki_helper(ata_hpt);
#endif
#if CONFIG_NICINTEL == 1
- print_supported_pcidevs_wiki(nics_intel);
+ print_supported_pcidevs_wiki_helper(nics_intel);
#endif
#if CONFIG_NICINTEL_SPI == 1
- print_supported_pcidevs_wiki(nics_intel_spi);
+ print_supported_pcidevs_wiki_helper(nics_intel_spi);
#endif
#if CONFIG_OGP_SPI == 1
- print_supported_pcidevs_wiki(ogp_spi);
+ print_supported_pcidevs_wiki_helper(ogp_spi);
#endif
#if CONFIG_SATAMV == 1
- print_supported_pcidevs_wiki(satas_mv);
+ print_supported_pcidevs_wiki_helper(satas_mv);
#endif
printf("\n|}\n");
}
+void print_supported_wiki(void)
+{
+ time_t t = time(NULL);
+
+ printf(wiki_header, ctime(&t), flashrom_version);
+ print_supported_chips_wiki(2);
+#if CONFIG_INTERNAL == 1
+ print_supported_chipsets_wiki(3);
+ print_supported_boards_wiki();
+#endif
+ print_supported_pcidevs_wiki();
+}
+
--
1.7.1
1
0
Stefan Tauner (5):
print_wiki.c: count pci devices and cleanup
Introduce and use enum test_state
print_wiki.c fix columns calculations
squash! print_wiki.c fix columns calculations
squash! print_wiki.c fix columns calculations
flash.h | 7 +-
ft2232_spi.c | 13 -
print.c | 884 +++++++++++++++++++++++++++++-----------------------------
print_wiki.c | 197 +++++++++----
programmer.h | 6 +-
5 files changed, 593 insertions(+), 514 deletions(-)
1
0
sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it looked for
eraser slots that have no erase functions set instead of those that have one set.
Also, the special 4k opcode encoded in the first double word was tried to add
with sfdp_add_uniform_eraser although the total size of the chip was not yet
known. This is now postponed and an additional check to sfdp_add_uniform_eraser
is added.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
this is the last fixup combined with what is described in the second half
of the commit log above.
sfdp.c | 18 +++++++++++++-----
1 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/sfdp.c b/sfdp.c
index 75dfb5f..80faeca 100644
--- a/sfdp.c
+++ b/sfdp.c
@@ -78,8 +78,10 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3
uint32_t total_size = flash->total_size * 1024;
erasefunc_t *erasefn = spi_get_erasefn_from_opcode(opcode);
- if (erasefn == NULL || block_size == 0 || total_size % block_size != 0) {
- msg_cdbg("%s: invalid input\n", __func__);
+ if (erasefn == NULL || total_size == 0 || block_size == 0 ||
+ total_size % block_size != 0) {
+ msg_cdbg("%s: invalid input, please report to "
+ "flashrom(a)flashrom.org\n", __func__);
return 1;
}
@@ -89,11 +91,12 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3
if (eraser->eraseblocks[0].size == block_size &&
eraser->block_erase == erasefn) {
msg_cdbg2(" Tried to add a duplicate block eraser: "
- "%d x %d B with opcode 0x%02x\n",
+ "%d x %d B with opcode 0x%02x.\n",
total_size/block_size, block_size, opcode);
return 1;
}
- if (eraser->eraseblocks[0].size != 0 || !eraser->block_erase) {
+ if (eraser->eraseblocks[0].size != 0 ||
+ eraser->block_erase != NULL) {
msg_cspew(" Block Eraser %d is already occupied.\n",
i);
continue;
@@ -115,6 +118,7 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3
static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len)
{
+ uint8_t opcode_4k = 0xFF;
uint32_t tmp32;
uint8_t tmp8;
uint32_t total_size; /* in bytes */
@@ -181,7 +185,8 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len)
}
if ((tmp32 & 0x3) == 0x1) {
- sfdp_add_uniform_eraser(flash, (tmp32 >> 8) & 0xFF, 4 * 1024);
+ /* add the eraser later, because we don't know total_size yet */
+ opcode_4k = (tmp32 >> 8) & 0xFF;
}
/* 2. double word */
@@ -204,6 +209,9 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len)
return 1;
}
+ if (opcode_4k != 0xFF)
+ sfdp_add_uniform_eraser(flash, opcode_4k, 4 * 1024);
+
/* FIXME: double words 3-7 contain unused fast read information */
if (len == 4 * 4) {
--
1.7.1
1
0
flashrom v0.9.2-r1141 on Linux 2.6.38-13-generic (i686), built with libpci 3.1.7, GCC 4.5.1, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 2 usecs, 189M loops per second, delay more than 10% too short (got 25% of expected delay), recalculating... 216M loops per second, delay more than 10% too short (got 28% of expected delay), recalculating... 260M loops per second, delay more than 10% too short (got 44% of expected delay), recalculating... 264M loops per second, delay more than 10% too short (got 34% of expected delay), recalculating... 266M loops per second, 10 myus = 4 us, 100 myus = 34 us, 1000 myus = 332 us, 10000 myus = 3311 us, 8 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd."
DMI string baseboard-product-name: "M61SME-S2"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, id 8716
Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e0, This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled.
Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks.
OK.
This chipset supports the following protocols: LPC.
Serial flash segment 0xfffe0000-0xffffffff enabled
Serial flash segment 0x000e0000-0x000fffff enabled
Serial flash segment 0xffee0000-0xffefffff disabled
Serial flash segment 0xfff80000-0xfffeffff enabled
LPC write to serial flash enabled
Serial flash pin 29
Serial flash port 0x0820
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for AMIC A25L05PT, 64 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L05PU, 64 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L10PT, 128 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L10PU, 128 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L20PT, 256 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L20PU, 256 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L40PT, 512 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L40PU, 512 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L80P, 1024 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L16PT, 2048 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L16PU, 2048 KB: 4 byte RDID not supported on this SPI controller
Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon EN29F010, 128 KB: skipped.
Probing for Eon EN29F002(A)(N)B, 256 KB: skipped.
Probing for Eon EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F002BC-T, 256 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: skipped.
Probing for Intel 82802AC, 1024 KB: skipped.
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for MoselVitelic V29C51000B, 64 KB: skipped.
Probing for MoselVitelic V29C51000T, 64 KB: skipped.
Probing for MoselVitelic V29C51400B, 512 KB: skipped.
Probing for MoselVitelic V29C51400T, 512 KB: skipped.
Probing for MoselVitelic V29LC51000, 64 KB: skipped.
Probing for MoselVitelic V29LC51001, 128 KB: skipped.
Probing for MoselVitelic V29LC51002, 256 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x2d, id2 0xc2, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Sharp LHF00L04, 1024 KB: skipped.
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x12
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x12, id2 0x12
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x12
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: skipped.
Probing for SST SST49LF003A/B, 384 KB: skipped.
Probing for SST SST49LF004A/B, 512 KB: skipped.
Probing for SST SST49LF004C, 512 KB: skipped.
Probing for SST SST49LF008A, 1024 KB: skipped.
Probing for SST SST49LF008C, 1024 KB: skipped.
Probing for SST SST49LF016C, 2048 KB: skipped.
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x2d, id2 0xc2, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x2d, id2 0xc2, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BB, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: skipped.
Probing for ST M50FW016, 2048 KB: skipped.
Probing for ST M50FW040, 512 KB: skipped.
Probing for ST M50FW080, 1024 KB: skipped.
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Chip status register is 00
Found chip "Winbond W25x40" (512 KB, SPI) at physical address 0xfff80000.
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: skipped.
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49F020, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x2d, id2 0xc2, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: skipped.
Probing for Winbond W39V080FA, 1024 KB: skipped.
Probing for Winbond W39V080FA (dual mode), 512 KB: skipped.
Probing for AMIC unknown AMIC SPI chip, 0 KB: 4 byte RDID not supported on this SPI controller
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3013
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x12
No operations were specified.
1
0
flashrom v0.9.5-r1504 on Linux 3.2.6-nouveau (i686), built with libpci
3.1.9, GCC 4.5.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 462M loops per
second, 10 myus = 11 us, 100 myus = 98 us, 1000 myus = 988 us, 10000 myus =
9858 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Point of View"
DMI string system-product-name: "Point of View"
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "Point of View"
DMI string baseboard-product-name: "Point of View"
DMI string baseboard-version: "1.00"
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP79" with PCI ID 10de:0aad.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom(a)flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet.
Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
SPI on this chipset is WIP. Please report any success or failure by mailing
us the verbose output to flashrom(a)flashrom.org, thanks!
Found SMBus device 10de:0aa2 at 00:03:2
MCP SPI BAR is at 0xfae80000
Mapping NVIDIA MCP6x SPI at 0xfae80000, unaligned size 0x544.
SPI control is 0xc01a, req=0, gnt=0
Please send the output of "flashrom -V" to flashrom(a)flashrom.org with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
The following protocols are supported: SPI.
Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address
0xfff00000.
Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found.
Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Macronix unknown Macronix SPI chip, 0 kB:
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2014
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1
0xc2, id2 0x13
Found Macronix flash chip "MX25L8005" (1024 kB, SPI).
No operations were specified.
1
0
Re: [flashrom] [PATCH 2/2] fixup! Add support for SFDP (JESD216).
by Carl-Daniel Hailfinger 19 Feb '12
by Carl-Daniel Hailfinger 19 Feb '12
19 Feb '12
Am 17.02.2012 03:25 schrieb Stefan Tauner:
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
> ---
> we were wrong regarding the probing process... the generic probes are
> executed apparently. this patch degrades all failure outputs (but OOM)
> to dbg.
Not sure if you want to reindent the messages for the cinfo->cdbg
change. Either way is OK.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
2
Increase flashrom release number to 0.9.5
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Index: flashrom-0.9.5-release/Makefile
===================================================================
--- flashrom-0.9.5-release/Makefile (Revision 1499)
+++ flashrom-0.9.5-release/Makefile (Arbeitskopie)
@@ -277,7 +277,7 @@
# will not require subversion. The downloadable snapshots are already exported.
SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/\([0-9]*\).*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown)
-RELEASE := 0.9.4
+RELEASE := 0.9.5
VERSION := $(RELEASE)-r$(SVNVERSION)
RELEASENAME ?= $(VERSION)
--
http://www.hailfinger.org/
2
4
Author: hailfinger
Date: Sat Feb 18 03:38:36 2012
New Revision: 1504
URL: http://flashrom.org/trac/flashrom/changeset/1504
Log:
Tag flashrom 0.9.5
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Added:
tags/flashrom-0.9.5/
- copied from r1503, trunk/
1
0
Author: hailfinger
Date: Sat Feb 18 03:34:58 2012
New Revision: 1503
URL: http://flashrom.org/trac/flashrom/changeset/1503
Log:
Increase flashrom release number to 0.9.5
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/Makefile
Modified: trunk/Makefile
==============================================================================
--- trunk/Makefile Fri Feb 17 21:03:37 2012 (r1502)
+++ trunk/Makefile Sat Feb 18 03:34:58 2012 (r1503)
@@ -277,7 +277,7 @@
# will not require subversion. The downloadable snapshots are already exported.
SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/\([0-9]*\).*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown)
-RELEASE := 0.9.4
+RELEASE := 0.9.5
VERSION := $(RELEASE)-r$(SVNVERSION)
RELEASENAME ?= $(VERSION)
1
0
Author: stefanct
Date: Fri Feb 17 21:03:37 2012
New Revision: 1502
URL: http://flashrom.org/trac/flashrom/changeset/1502
Log:
Add a bunch of new/tested stuff and various small changes 11
Tested Mainboards:
NOT OK:
- HP dc7800
http://paste.flashrom.org/view.php?id=1084
- add "Low Profile Desktop" to our dmi whitelist
- fix print_wiki (broken since r1488)
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/dmi.c
trunk/print.c
trunk/print_wiki.c
Modified: trunk/dmi.c
==============================================================================
--- trunk/dmi.c Fri Feb 17 15:51:15 2012 (r1501)
+++ trunk/dmi.c Fri Feb 17 21:03:37 2012 (r1502)
@@ -71,7 +71,8 @@
} dmi_chassis_types[] = {
{0x01, 2, "Other"},
{0x02, 2, "Unknown"},
- {0x03, 0, "Desktop",},
+ {0x03, 0, "Desktop"},
+ {0x04, 0, "Low Profile Desktop"},
{0x06, 0, "Mini Tower"},
{0x07, 0, "Tower"},
{0x08, 1, "Portable"},
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Fri Feb 17 15:51:15 2012 (r1501)
+++ trunk/print.c Fri Feb 17 21:03:37 2012 (r1502)
@@ -798,6 +798,7 @@
B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
B("HP", "ProLiant N40L", 1, NULL, NULL),
B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
+ B("HP", "dc7800", 0, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
Modified: trunk/print_wiki.c
==============================================================================
--- trunk/print_wiki.c Fri Feb 17 15:51:15 2012 (r1501)
+++ trunk/print_wiki.c Fri Feb 17 21:03:37 2012 (r1502)
@@ -220,6 +220,7 @@
if (!strncmp(f->vendor, "Unknown", 7) ||
!strncmp(f->vendor, "Programmer", 10) ||
!strncmp(f->name, "unknown", 7))
+ continue;
chipcount++;
}
1
0
in att
best regards
1
0
Hello,
I tried out flashrom on a ASUS OPLX-M motherboard, and it didn't find a flash
device. I found some info by googling (that I cannot verify) that the OPLX-M
would be an OEM (or something) version of the ASUS MEL-M; I suppose this
particular board originally came with a Fujitsu/Siemens PC.
http://support.asus.com/download/download.aspx?modelname=MEL-M&SLanguage=en…
3
4
Author: stefanct
Date: Fri Feb 17 15:51:15 2012
New Revision: 1501
URL: http://flashrom.org/trac/flashrom/changeset/1501
Log:
Add board enable for ASUS OPLX-M.
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta(a)iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Signed-off-by: Joshua Roys <roysjosh(a)gmail.com>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/board_enable.c
trunk/print.c
Modified: trunk/board_enable.c
==============================================================================
--- trunk/board_enable.c Fri Feb 17 15:51:04 2012 (r1500)
+++ trunk/board_enable.c Fri Feb 17 15:51:15 2012 (r1501)
@@ -1240,6 +1240,7 @@
/*
* Suited for:
+ * - ASUS OPLX-M
* - ASUS P2B-N
*/
static int intel_piix4_gpo18_lower(void)
@@ -2144,6 +2145,7 @@
{0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, P3, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise},
{0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, P3, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise},
{0x8086, 0x24cc, 0, 0, 0x8086, 0x24c3, 0x1043, 0x1869, "^M6Ne$", NULL, NULL, P3, "ASUS", "M6Ne", 0, NT, intel_ich_gpio43_raise},
+ {0x8086, 0x7180, 0, 0, 0x8086, 0x7110, 0, 0, "^OPLX-M$", NULL, NULL, P3, "ASUS", "OPLX-M", 0, NT, intel_piix4_gpo18_lower},
{0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^P2B-N$", NULL, NULL, P3, "ASUS", "P2B-N", 0, OK, intel_piix4_gpo18_lower},
{0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, P3, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise},
{0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, P3, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise},
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Fri Feb 17 15:51:04 2012 (r1500)
+++ trunk/print.c Fri Feb 17 15:51:15 2012 (r1501)
@@ -642,6 +642,7 @@
B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
+ B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."),
B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
1
0
Author: stefanct
Date: Fri Feb 17 15:51:04 2012
New Revision: 1500
URL: http://flashrom.org/trac/flashrom/changeset/1500
Log:
Add support for SFDP (JESD216).
Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.
This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.
Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)
Tested-by: David Hendricks <dhendrix(a)google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
Thanks also to Michael Karcher for his comments and preliminary review!
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Added:
trunk/sfdp.c (contents, props changed)
Modified:
trunk/Makefile
trunk/chipdrivers.h
trunk/flash.h
trunk/flashchips.c
trunk/flashchips.h
trunk/flashrom.c
trunk/spi.h
trunk/spi25.c
Modified: trunk/Makefile
==============================================================================
--- trunk/Makefile Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/Makefile Fri Feb 17 15:51:04 2012 (r1500)
@@ -261,7 +261,7 @@
CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \
sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \
sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o sharplhf00l04.o \
- a25.o at25.o opaque.o
+ a25.o at25.o opaque.o sfdp.o
LIB_OBJS = layout.o
Modified: trunk/chipdrivers.h
==============================================================================
--- trunk/chipdrivers.h Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/chipdrivers.h Fri Feb 17 15:51:04 2012 (r1500)
@@ -41,6 +41,7 @@
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode);
int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len);
int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len);
int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len);
@@ -58,6 +59,9 @@
int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize);
int spi_aai_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len);
+/* sfdp.c */
+int probe_spi_sfdp(struct flashctx *flash);
+
/* opaque.c */
int probe_opaque(struct flashctx *flash);
int read_opaque(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len);
Modified: trunk/flash.h
==============================================================================
--- trunk/flash.h Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/flash.h Fri Feb 17 15:51:04 2012 (r1500)
@@ -175,6 +175,8 @@
struct registered_programmer *pgm;
};
+typedef int (erasefunc_t)(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+
#define TEST_UNTESTED 0
#define TEST_OK_PROBE (1 << 0)
Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/flashchips.c Fri Feb 17 15:51:04 2012 (r1500)
@@ -8885,6 +8885,29 @@
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program */
},
+
+ {
+ .vendor = "Unknown",
+ .name = "SFDP-capable chip",
+ .bustype = BUS_SPI,
+ .manufacture_id = GENERIC_MANUF_ID,
+ .model_id = SFDP_DEVICE_ID,
+ /* We present our own "report this" text hence we do not
+ * want the default "This flash part has status UNTESTED..."
+ * text to be printed. */
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_sfdp,
+ .unlock = spi_disable_blockprotect, /* is this safe? */
+ .read = spi_chip_read,
+ /* FIXME: some vendor extensions define this */
+ .voltage = {},
+ /* Everything below will be set by the probing function. */
+ .write = NULL,
+ .total_size = 0,
+ .page_size = 0,
+ .feature_bits = 0,
+ .block_erasers = {},
+ },
{
.vendor = "Programmer",
Modified: trunk/flashchips.h
==============================================================================
--- trunk/flashchips.h Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/flashchips.h Fri Feb 17 15:51:04 2012 (r1500)
@@ -34,8 +34,11 @@
* SPI parts have 16-bit device IDs if they support RDID.
*/
-#define GENERIC_MANUF_ID 0xffff /* Check if there is a vendor ID */
-#define GENERIC_DEVICE_ID 0xffff /* Only match the vendor ID */
+#define GENERIC_MANUF_ID 0xFFFF /* Check if there is a vendor ID */
+#define GENERIC_DEVICE_ID 0xFFFF /* Only match the vendor ID */
+#define SFDP_DEVICE_ID 0xFFFE
+#define PROGMANUF_ID 0xFFFE /* dummy ID for opaque chips behind a programmer */
+#define PROGDEV_ID 0x01 /* dummy ID for opaque chips behind a programmer */
#define ALLIANCE_ID 0x52 /* Alliance Semiconductor */
#define ALLIANCE_AS29F002B 0x34
@@ -646,7 +649,4 @@
#define WINBOND_W49V002A 0xB0
#define WINBOND_W49V002FA 0x32
-#define PROGMANUF_ID 0xFFFE /* dummy ID for opaque chips behind a programmer */
-#define PROGDEV_ID 0x01 /* dummy ID for opaque chips behind a programmer */
-
#endif /* !FLASHCHIPS_H */
Modified: trunk/flashrom.c
==============================================================================
--- trunk/flashrom.c Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/flashrom.c Fri Feb 17 15:51:04 2012 (r1500)
@@ -980,13 +980,38 @@
/* If this is the first chip found, accept it.
* If this is not the first chip found, accept it only if it is
- * a non-generic match.
- * We could either make chipcount global or provide it as
- * parameter, or we assume that startchip==0 means this call to
- * probe_flash() is the first one and thus no chip has been
- * found before.
+ * a non-generic match. SFDP and CFI are generic matches.
+ * startchip==0 means this call to probe_flash() is the first
+ * one for this programmer interface and thus no other chip has
+ * been found on this interface.
*/
- if (startchip == 0 || fill_flash->model_id != GENERIC_DEVICE_ID)
+ if (startchip == 0 && fill_flash->model_id == SFDP_DEVICE_ID) {
+ msg_cinfo("===\n"
+ "SFDP has autodetected a flash chip which is "
+ "not natively supported by flashrom yet.\n");
+ if (count_usable_erasers(fill_flash) == 0)
+ msg_cinfo("The standard operations read and "
+ "verify should work, but to support "
+ "erase, write and all other "
+ "possible features");
+ else
+ msg_cinfo("All standard operations (read, "
+ "verify, erase and write) should "
+ "work, but to support all possible "
+ "features");
+
+ msg_cinfo(" we need to add them manually.\nYou "
+ "can help us by mailing us the output of "
+ "the following command to flashrom@flashrom."
+ "org: \n'flashrom -VV [plus the "
+ "-p/--programmer parameter (if needed)]"
+ "'\nThanks for your help!\n"
+ "===\n");
+ }
+
+ if (startchip == 0 ||
+ ((fill_flash->model_id != GENERIC_DEVICE_ID) &&
+ (fill_flash->model_id != SFDP_DEVICE_ID)))
break;
notfound:
Added: trunk/sfdp.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/sfdp.c Fri Feb 17 15:51:04 2012 (r1500)
@@ -0,0 +1,370 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2011-2012 Stefan Tauner
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include "flash.h"
+#include "spi.h"
+#include "chipdrivers.h"
+
+static int spi_sfdp_read_sfdp_chunk(struct flashctx *flash, uint32_t address, uint8_t *buf, int len)
+{
+ int i, ret;
+ const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = {
+ JEDEC_SFDP,
+ (address >> 16) & 0xff,
+ (address >> 8) & 0xff,
+ (address >> 0) & 0xff,
+ /* FIXME: the following dummy byte explodes on some programmers.
+ * One possible workaround would be to read the dummy byte
+ * instead and discard its value.
+ */
+ 0
+ };
+ msg_cspew("%s: addr=0x%x, len=%d, data:\n", __func__, address, len);
+ ret = spi_send_command(flash, sizeof(cmd), len, cmd, buf);
+ for (i = 0; i < len; i++)
+ msg_cspew(" 0x%02x", buf[i]);
+ msg_cspew("\n");
+ return ret;
+}
+
+static int spi_sfdp_read_sfdp(struct flashctx *flash, uint32_t address, uint8_t *buf, int len)
+{
+ /* FIXME: this is wrong. There are different upper bounds for the number
+ * of bytes to read on the various programmers (even depending on the
+ * rest of the structure of the transaction).*/
+ int maxstep = 8;
+ int ret = 0;
+ while (len > 0) {
+ int step = min(len, maxstep);
+ ret = spi_sfdp_read_sfdp_chunk(flash, address, buf, step);
+ if (ret)
+ return ret;
+ address += step;
+ buf += step;
+ len -= step;
+ }
+ return ret;
+}
+
+struct sfdp_tbl_hdr {
+ uint8_t id;
+ uint8_t v_minor;
+ uint8_t v_major;
+ uint8_t len;
+ uint32_t ptp; /* 24b pointer */
+};
+
+static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint32_t block_size)
+{
+ int i;
+ uint32_t total_size = flash->total_size * 1024;
+ erasefunc_t *erasefn = spi_get_erasefn_from_opcode(opcode);
+
+ if (erasefn == NULL || block_size == 0 || total_size % block_size != 0) {
+ msg_cdbg("%s: invalid input\n", __func__);
+ return 1;
+ }
+
+ for (i = 0; i < NUM_ERASEFUNCTIONS; i++) {
+ struct block_eraser *eraser = &flash->block_erasers[i];
+ /* Check for duplicates (including (some) non-uniform ones). */
+ if (eraser->eraseblocks[0].size == block_size &&
+ eraser->block_erase == erasefn) {
+ msg_cdbg2(" Tried to add a duplicate block eraser: "
+ "%d x %d B with opcode 0x%02x\n",
+ total_size/block_size, block_size, opcode);
+ return 1;
+ }
+ if (eraser->eraseblocks[0].size != 0 || !eraser->block_erase) {
+ msg_cspew(" Block Eraser %d is already occupied.\n",
+ i);
+ continue;
+ }
+
+ eraser->block_erase = erasefn;
+ eraser->eraseblocks[0].size = block_size;
+ eraser->eraseblocks[0].count = total_size/block_size;
+ msg_cdbg2(" Block eraser %d: %d x %d B with opcode "
+ "0x%02x\n", i, total_size/block_size, block_size,
+ opcode);
+ return 0;
+ }
+ msg_cinfo("%s: Not enough space to store another eraser (i=%d)."
+ " Please report this at flashrom(a)flashrom.org\n",
+ __func__, i);
+ return 1;
+}
+
+static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len)
+{
+ uint32_t tmp32;
+ uint8_t tmp8;
+ uint32_t total_size; /* in bytes */
+ uint32_t block_size;
+ int dw, j;
+
+ msg_cdbg("Parsing JEDEC flash parameter table... ");
+ if (len != 9 * 4 && len != 4 * 4) {
+ msg_cdbg("%s: len out of spec\n", __func__);
+ return 1;
+ }
+ msg_cdbg2("\n");
+
+ /* 1. double word */
+ dw = 0;
+ tmp32 = buf[(4 * dw) + 0];
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8;
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16;
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24;
+
+ tmp8 = (tmp32 >> 17) & 0x3;
+ switch (tmp8) {
+ case 0x0:
+ msg_cdbg2(" 3-Byte only addressing.\n");
+ break;
+ case 0x1:
+ msg_cdbg2(" 3-Byte (and optionally 4-Byte) addressing.\n");
+ break;
+ case 0x2:
+ msg_cdbg(" 4-Byte only addressing (not supported by "
+ "flashrom).\n");
+ return 1;
+ default:
+ msg_cdbg(" Required addressing mode (0x%x) not supported.\n",
+ tmp8);
+ return 1;
+ }
+
+ msg_cdbg2(" Status register is ");
+ if (tmp32 & (1 << 3)) {
+ msg_cdbg2("volatile and writes to the status register have to "
+ "be enabled with ");
+ if (tmp32 & (1 << 4)) {
+ flash->feature_bits = FEATURE_WRSR_WREN;
+ msg_cdbg2("WREN (0x06).\n");
+ } else {
+ flash->feature_bits = FEATURE_WRSR_EWSR;
+ msg_cdbg2("EWSR (0x50).\n");
+ }
+ } else
+ msg_cdbg2("non-volatile and the standard does not allow "
+ "vendors to tell us whether EWSR/WREN is needed for "
+ "status register writes - assuming EWSR.\n");
+
+ msg_cdbg2(" Write chunk size is ");
+ if (tmp32 & (1 << 2)) {
+ msg_cdbg2("at least 64 B.\n");
+ flash->page_size = 64;
+ flash->write = spi_chip_write_256;
+ } else {
+ msg_cdbg2("1 B only.\n");
+ flash->page_size = 256;
+ flash->write = spi_chip_write_1;
+ }
+
+ if ((tmp32 & 0x3) == 0x1) {
+ sfdp_add_uniform_eraser(flash, (tmp32 >> 8) & 0xFF, 4 * 1024);
+ }
+
+ /* 2. double word */
+ dw = 1;
+ tmp32 = buf[(4 * dw) + 0];
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8;
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16;
+ tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24;
+
+ if (tmp32 & (1 << 31)) {
+ msg_cdbg("Flash chip size >= 4 Gb/512 MB not supported.\n");
+ return 1;
+ }
+ total_size = ((tmp32 & 0x7FFFFFFF) + 1) / 8;
+ flash->total_size = total_size / 1024;
+ msg_cdbg2(" Flash chip size is %d kB.\n", flash->total_size);
+ if (total_size > (1 << 24)) {
+ msg_cdbg("Flash chip size is bigger than what 3-Byte addressing "
+ "can access.\n");
+ return 1;
+ }
+
+ /* FIXME: double words 3-7 contain unused fast read information */
+
+ if (len == 4 * 4) {
+ msg_cdbg("It seems like this chip supports the preliminary "
+ "Intel version of SFDP, skipping processing of double "
+ "words 3-9.\n");
+ goto done;
+ }
+
+ dw = 8;
+ for (j = 0; j < 4; j++) {
+ /* 8 double words from the start + 2 words for every eraser */
+ tmp8 = buf[(4 * dw) + (2 * j)];
+ if (tmp8 == 0) {
+ msg_cdbg2(" Block eraser %d is unused.\n", j);
+ continue;
+ }
+ if (tmp8 >= 31) {
+ msg_cdbg2(" Block size of eraser %d (2^%d) is too big "
+ "for flashrom.\n", j, tmp8);
+ continue;
+ }
+ block_size = 1 << (tmp8); /* block_size = 2 ^ field */
+
+ tmp8 = buf[(4 * dw) + (2 * j) + 1];
+ sfdp_add_uniform_eraser(flash, tmp8, block_size);
+ }
+
+done:
+ msg_cdbg("done.\n");
+ return 0;
+}
+
+int probe_spi_sfdp(struct flashctx *flash)
+{
+ int ret = 0;
+ uint8_t buf[8];
+ uint32_t tmp32;
+ uint8_t nph;
+ /* need to limit the table loop by comparing i to uint8_t nph hence: */
+ uint16_t i;
+ struct sfdp_tbl_hdr *hdrs;
+ uint8_t *hbuf;
+ uint8_t *tbuf;
+
+ if (spi_sfdp_read_sfdp(flash, 0x00, buf, 4)) {
+ msg_cdbg("Receiving SFDP signature failed.\n");
+ return 0;
+ }
+ tmp32 = buf[0];
+ tmp32 |= ((unsigned int)buf[1]) << 8;
+ tmp32 |= ((unsigned int)buf[2]) << 16;
+ tmp32 |= ((unsigned int)buf[3]) << 24;
+
+ if (tmp32 != 0x50444653) {
+ msg_cdbg2("Signature = 0x%08x (should be 0x50444653)\n", tmp32);
+ msg_cdbg("No SFDP signature found.\n");
+ return 0;
+ }
+
+ if (spi_sfdp_read_sfdp(flash, 0x04, buf, 3)) {
+ msg_cdbg("Receiving SFDP revision and number of parameter "
+ "headers (NPH) failed. ");
+ return 0;
+ }
+ msg_cdbg2("SFDP revision = %d.%d\n", buf[1], buf[0]);
+ if (buf[1] != 0x01) {
+ msg_cdbg("The chip supports an unknown version of SFDP. "
+ "Aborting SFDP probe!\n");
+ return 0;
+ }
+ nph = buf[2];
+ msg_cdbg2("SFDP number of parameter headers is %d (NPH = %d).\n",
+ nph + 1, nph);
+
+ /* Fetch all parameter headers, even if we don't use them all (yet). */
+ hbuf = malloc((nph + 1) * 8);
+ hdrs = malloc((nph + 1) * sizeof(struct sfdp_tbl_hdr));
+ if (hbuf == NULL || hdrs == NULL ) {
+ msg_gerr("Out of memory!\n");
+ goto cleanup_hdrs;
+ }
+ if (spi_sfdp_read_sfdp(flash, 0x08, hbuf, (nph + 1) * 8)) {
+ msg_cdbg("Receiving SFDP parameter table headers failed.\n");
+ goto cleanup_hdrs;
+ }
+
+ for (i = 0; i <= nph; i++) {
+ uint16_t len;
+ hdrs[i].id = hbuf[(8 * i) + 0];
+ hdrs[i].v_minor = hbuf[(8 * i) + 1];
+ hdrs[i].v_major = hbuf[(8 * i) + 2];
+ hdrs[i].len = hbuf[(8 * i) + 3];
+ hdrs[i].ptp = hbuf[(8 * i) + 4];
+ hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 5]) << 8;
+ hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 6]) << 16;
+ msg_cdbg2("\nSFDP parameter table header %d/%d:\n", i, nph);
+ msg_cdbg2(" ID 0x%02x, version %d.%d\n", hdrs[i].id,
+ hdrs[i].v_major, hdrs[i].v_minor);
+ len = hdrs[i].len * 4;
+ tmp32 = hdrs[i].ptp;
+ msg_cdbg2(" Length %d B, Parameter Table Pointer 0x%06x\n",
+ len, tmp32);
+
+ if (tmp32 + len >= (1 << 24)) {
+ msg_cdbg("SFDP Parameter Table %d supposedly overflows "
+ "addressable SFDP area. This most\nprobably "
+ "indicates a corrupt SFDP parameter table "
+ "header. Skipping it.\n", i);
+ continue;
+ }
+
+ tbuf = malloc(len);
+ if (tbuf == NULL) {
+ msg_gerr("Out of memory!\n");
+ goto cleanup_hdrs;
+ }
+ if (spi_sfdp_read_sfdp(flash, tmp32, tbuf, len)){
+ msg_cdbg("Fetching SFDP parameter table %d failed.\n",
+ i);
+ free(tbuf);
+ continue;
+ }
+ msg_cspew(" Parameter table contents:\n");
+ for (tmp32 = 0; tmp32 < len; tmp32++) {
+ if ((tmp32 % 8) == 0) {
+ msg_cspew(" 0x%04x: ", tmp32);
+ }
+ msg_cspew(" %02x", buf[tmp32]);
+ if ((tmp32 % 8) == 7) {
+ msg_cspew("\n");
+ continue;
+ }
+ if ((tmp32 % 8) == 3) {
+ msg_cspew(" ");
+ continue;
+ }
+ }
+
+ if (i == 0) { /* Mandatory JEDEC SFDP parameter table */
+ if (hdrs[i].id != 0)
+ msg_cdbg("ID of the mandatory JEDEC SFDP "
+ "parameter table is not 0 as demanded "
+ "by JESD216 (warning only).\n");
+
+ if (hdrs[i].v_major != 0x01) {
+ msg_cdbg("The chip contains an unknown "
+ "version of the JEDEC flash "
+ "parameters table, skipping it.\n");
+ } else if (len != 9 * 4 && len != 4 * 4) {
+ msg_cdbg("Length of the mandatory JEDEC SFDP "
+ "parameter table is wrong (%d B), "
+ "skipping it.\n", len);
+ } else if (sfdp_fill_flash(flash, tbuf, len) == 0)
+ ret = 1;
+ }
+ free(tbuf);
+ }
+
+cleanup_hdrs:
+ free(hdrs);
+ free(hbuf);
+ return ret;
+}
Modified: trunk/spi.h
==============================================================================
--- trunk/spi.h Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/spi.h Fri Feb 17 15:51:04 2012 (r1500)
@@ -40,6 +40,11 @@
#define JEDEC_REMS_OUTSIZE 0x04
#define JEDEC_REMS_INSIZE 0x02
+/* Read Serial Flash Discoverable Parameters (SFDP) */
+#define JEDEC_SFDP 0x5a
+#define JEDEC_SFDP_OUTSIZE 0x05 /* 8b op, 24b addr, 8b dummy */
+/* JEDEC_SFDP_INSIZE : any length */
+
/* Read Electronic Signature */
#define JEDEC_RES 0xab
#define JEDEC_RES_OUTSIZE 0x04
Modified: trunk/spi25.c
==============================================================================
--- trunk/spi25.c Thu Feb 16 22:07:07 2012 (r1499)
+++ trunk/spi25.c Fri Feb 17 15:51:04 2012 (r1500)
@@ -720,6 +720,32 @@
return spi_chip_erase_c7(flash);
}
+erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode)
+{
+ switch(opcode){
+ case 0xff:
+ case 0x00:
+ /* Not specified, assuming "not supported". */
+ return NULL;
+ case 0x20:
+ return &spi_block_erase_20;
+ case 0x52:
+ return &spi_block_erase_52;
+ case 0x60:
+ return &spi_block_erase_60;
+ case 0xc7:
+ return &spi_block_erase_c7;
+ case 0xd7:
+ return &spi_block_erase_d7;
+ case 0xd8:
+ return &spi_block_erase_d8;
+ default:
+ msg_cinfo("%s: unknown erase opcode (0x%02x). Please report "
+ "this at flashrom(a)flashrom.org\n", __func__, opcode);
+ return NULL;
+ }
+}
+
int spi_write_status_enable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR };
1
0
On Mon, 13 Feb 2012 12:09:53 +0200
Shahar Or <mightyiampresence(a)gmail.com> wrote:
> Dear ones,
>
> I'm not subscribed to the list so please reply directly.
>
> I've tested read and write on Gigabyte GA-880GMA-USB3 (rev 3.1).
>
> Thanks so much for enabling me to flash my BIOS ROM from Linux!
>
> Here's the link to the mainboard's page in Gigabyte:
> http://www.gigabyte.com/products/product-page.aspx?pid=3817
Hello Shahar,
thanks for your report! I have marked the mainboard as tested and will
commit that later together with other small changes. It would be
appreciated if you could upload verbose logs of flashrom with such
reports (at least a verbose probing with flashrom -V).
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
2
1
Re: [flashrom] [PATCH] Add a bunch of new/tested stuff and various small changes 10
by Stefan Tauner 17 Feb '12
by Stefan Tauner 17 Feb '12
17 Feb '12
was committed with some additional changes in r1499.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0
17 Feb '12
And here's the rest of the review, as promised.
Please note that I do not have the stgandard at hand, so this is not a
correctness review, but a code review.
Am 31.01.2012 06:59 schrieb Stefan Tauner:
> --- /dev/null
> +++ b/sfdp.c
> @@ -0,0 +1,355 @@
[...]
> +static int sfdp_fill_flash(struct flashctx *f, uint8_t *buf, uint16_t len)
*flash instead of *f, please.
> +{
> + uint32_t tmp32;
> + uint8_t tmp8;
> + uint32_t total_size; /* in bytes */
> + uint32_t bsize;
> + uint8_t opcode_4k = 0xFF;
> + int dw, j;
> +
> + msg_cdbg("Parsing JEDEC SFDP parameter table... ");
... JEDEC flash parameter table...
> + if (len != 9 * 4 && len != 4 * 4) {
> + msg_cerr("%s: len out of spec\n", __func__);
> + return 1;
> + }
> + msg_cdbg2("\n");
> +
> + /* 1. double word */
> + dw = 0;
> + tmp32 = buf[(4 * dw) + 0];
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8;
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16;
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24;
> +
> + tmp8 = (tmp32 >> 17) & 0x3;
> + switch (tmp8) {
> + case 0x0:
> + msg_cdbg2(" 3-Byte only addressing.\n");
> + break;
> + case 0x1:
> + msg_cdbg2(" 3-Byte (and optionally 4-Byte) addressing.\n");
> + break;
> + case 0x2:
> + msg_cdbg(" 4-Byte only addressing not supported.\n");
> + return 1;
> + default:
> + msg_cdbg(" Required addressing mode (0x%x) not supported.\n",
> + tmp8);
> + return 1;
> + }
> +
> + msg_cdbg2(" Writes to the status register have ");
> + if (tmp32 & (1 << 3)) {
> + msg_cdbg2("to be enabled with ");
> + if (tmp32 & (1 << 4)) {
> + f->feature_bits = FEATURE_WRSR_WREN;
> + msg_cdbg2("WREN (0x06).\n");
> + } else {
> + f->feature_bits = FEATURE_WRSR_EWSR;
> + msg_cdbg2("EWSR (0x50).\n");
> + }
> + } else
> + msg_cdbg2("not to be especially enabled.\n");
The "Writing to Volatile Status Register" part of JESD216 is one of the
most confusing wordings I ever saw in a standard. I expect some flash
chip vendors to conform to the letter of the spec which will cause
pretty explosions: If the status register is nonvolatile and needs EWSR
or WREN for writes, the standard explicitly requires the vendor to set
bits 3+4 to 0 (EWSR/WREN not needed). I don't think JEDEC understood the
implications of that wording.
Suggestion for a standards-conforming code flow:
msg_cdbg2(" Status register is ");
if (tmp32 & (1 << 3)) {
msg_cdbg2("volatile and writes to the status register have to be
enabled with ");
[your bit 4 code]
} else
msg_cdbg2("nonvolatile and the standard does not allow vendors to tell
us whether EWSR/WREN is needed for status register writes");
> +
> + msg_cdbg2(" Write granularity is ");
I know they call it write granularity, but flashrom calls it writechunk
size. Please use our terminology here even if the standard calls it
differently. You can add a comment if you think that clarifies the code
for future developers.
> + if (tmp32 & (1 << 2)) {
> + msg_cdbg2("at least 64 B.\n");
> + f->write = spi_chip_write_256;
Please insert
flash->page_size = 64;
> + } else {
> + msg_cdbg2("1 B only.\n");
> + f->write = spi_chip_write_1;
flash->page_size = 256;
(I know that page_size needs to die, but right now we use it.)
> + }
> +
> + if ((tmp32 & 0x3) == 0x1) {
> + opcode_4k = (tmp32 >> 8) & 0xFF; /* will be dealt with later */
> + }
What about this instead?
switch (tmp32 & 0x03) {
case 0x0:
case 0x2:
msg_cerr("4k erase is reserved... should not happen");
return 1;
break;
case 0x1:
opcode_4k = (tmp32 >> 8) & 0xFF; /* will be dealt with later */
break;
case 0x3:
if (((tmp32 >> 8) & 0xFF) != 0xFF) {
msg_cdbg("wtf inconsistent 4k erase settings?!?");
return 1;
}
}
Admittedly, the wording could be better.
> +
> + /* 2. double word */
> + dw = 1;
> + tmp32 = buf[(4 * dw) + 0];
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8;
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16;
> + tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24;
> +
> + if (tmp32 & (1 << 31)) {
> + msg_cerr("Flash chip size >= 4 Gb/512 MB not supported.\n");
> + return 1;
> + }
> + total_size = ((tmp32 & 0x7FFFFFFF) + 1) / 8;
> + f->total_size = total_size / 1024;
> + msg_cdbg2(" Flash chip size is %d kB.\n", f->total_size);
> +
> + /* FIXME: double words 3-7 contain unused fast read information */
> +
> + if (len == 4 * 4) {
> + msg_cdbg("It seems like this chip supports the preliminary "
> + "Intel version of SFDP, skipping processing of double "
> + "words 3-9.\n");
> + goto proc_4k;
> + }
> +
> + dw = 8;
> + for (j = 0; j < 4; j++) {
> + /* 8 double words from the start + 2 words for every eraser */
> + tmp32 = buf[(4 * dw) + (2 * j)];
use tmp8 instead?
> + if (tmp32 == 0) {
> + msg_cdbg2(" Block eraser %d is unused.\n", j);
> + continue;
> + }
> + if (tmp32 >= 31) {
> + msg_cdbg2(" Block size of eraser %d (2^%d) is too big."
"... too big for flashrom."
> + "\n", j, tmp32);
> + continue;
> + }
> + bsize = 1 << (tmp32); /* bsize = 2 ^ field */
> +
> + tmp8 = buf[(4 * dw) + (2 * j) + 1];
> + if(sfdp_add_uniform_eraser(f, tmp8, bsize))
> + continue;
> + /* If there is a valid 4k value in the last double words,
> + * we want to override the value from double word 1, hence force
> + * skipping its processing: */
> + if (bsize == 4 * 1024)
> + opcode_4k = 0xFF;
Not really. What happens if there are multiple valid opcodes for 4k
erase? Such chips do exist IIRC. What about
if (bsize == 4 * 1024) {
if (tmp8 == opcode_4k)
opcode_4k == 0xFF;
else
msg_cdbg("More than one 4kB eraser opcode found: 0x%02x and
0x%02x.", tmp8, opcode_4k);
}
> + }
> +
> +proc_4k:
> + if (opcode_4k != 0xFF) {
> + sfdp_add_uniform_eraser(f, opcode_4k, 4 * 1024);
> + }
> + msg_cdbg("done.\n");
> + return 0;
> +}
> +
> +static int sfdp_fetch_pt(struct flashctx *flash, uint32_t addr, uint8_t *buf, uint16_t len)
> +{
> + uint16_t i;
> + if (spi_sfdp(flash, addr, buf, len)) {
> + msg_cerr("Receiving SFDP parameter table failed.\n");
> + return 1;
> + }
> + msg_cspew(" Parameter table contents:\n");
> + for(i = 0; i < len; i++) {
> + if ((i % 8) == 0) {
> + msg_cspew(" 0x%03x: ", i);
> + }
> + msg_cspew(" 0x%02x", buf[i]);
> + if ((i % 8) == 7) {
> + msg_cspew("\n");
> + continue;
> + }
> + if ((i % 8) == 3) {
> + msg_cspew(" ");
> + continue;
> + }
> + }
> + msg_cspew("\n");
Do we have some generic hexdump() function? I agree that dumping the
parameter table contents may make sense, but open-coding your own
hexdump is probably not the best idea. Do we want this hexdump
functionality at all, and if yes, should it be factored out?
> + return 0;
> +}
> +
> +int probe_spi_sfdp(struct flashctx *flash)
> +{
> + int ret = 0;
> + uint8_t buf[8];
> + uint32_t tmp32;
> + uint8_t nph;
> + /* need to limit the table loop by comparing i to uint8_t nph hence: */
> + uint16_t i;
> + struct sfdp_tbl_hdr *hdrs;
> + uint8_t *hbuf;
> + uint8_t *tbuf;
> +
> + if (spi_sfdp(flash, 0x00, buf, 4)) {
> + msg_cerr("Receiving SFDP signature failed.\n");
Hmmm... should all boards with IT87/ICH SPI and unknown flash chips see
an error message? While I'm often for upgrading error messages to
msg_*err, I believe that this case should be rather mag_*dbg.
> + return 0;
> + }
> + tmp32 = buf[0];
> + tmp32 |= ((unsigned int)buf[1]) << 8;
> + tmp32 |= ((unsigned int)buf[2]) << 16;
> + tmp32 |= ((unsigned int)buf[3]) << 24;
> +
> + msg_cdbg2("SFDP signature = 0x%08x (should be 0x50444653)\n", tmp32);
> + if (tmp32 != 0x50444653) {
> + msg_cdbg("No SFDP signature found.\n");
> + return 0;
> + }
> + if (spi_sfdp(flash, 0x04, buf, 3)) {
> + msg_cerr("Receiving SFDP revision and number of parameter "
> + "headers (NPH) failed. ");
> + return 0;
> + }
> + msg_cdbg2("SFDP revision = %d.%d\n", buf[1], buf[0]);
return 0 if major revision is unknown (i.e. not 0x01). A new major
revision may change the meaning of any field and that's why we should abort.
> + nph = buf[2];
> + msg_cdbg2("SFDP number of parameter headers (NPH) = %d (+ 1 mandatory)"
> + "\n", nph);
> +
> + /* Fetch all parameter headers, even if we don't use them all (yet). */
> + hbuf = malloc(sizeof(struct sfdp_tbl_hdr) * (nph + 1));
> + hdrs = malloc((nph + 1) * 8);
Why is 8 a magic unexplained constant for hdrs allocation, but sizeof
struct sfdp_tbl_hdr (which is 8 as well) is used for hbuf allocation?
Did you mix up the two by accident? And why is (nph+1) the first factor
in the second malloc and the second factor in the first malloc?
> + if (hbuf == NULL || hdrs == NULL ) {
> + msg_gerr("Out of memory!\n");
insert the following code:
ret = 0;
goto cleanup_hdrs;
> + exit(1); /* FIXME: shutdown gracefully */
and kill the exit(1). It would be nice to change the probe interface to
return 0 on success... that would allow us to return detailed errors.
OTOH, we might want to use the probe interface to return match accuracy,
in which case 0 would be nomatch. Comments appreciated.
> + }
> + if (spi_sfdp(flash, 0x08, hbuf, (nph + 1) * 8)) {
> + msg_cerr("Receiving SFDP parameter table headers failed.\n");
> + goto cleanup_hdrs;
> + }
> +
> + i = 0;
> + do {
for (i=0; i <=nph; i++) {
> + uint16_t len;
> + hdrs[i].id = hbuf[(8 * i) + 0];
> + hdrs[i].v_minor = hbuf[(8 * i) + 1];
> + hdrs[i].v_major = hbuf[(8 * i) + 2];
> + hdrs[i].len = hbuf[(8 * i) + 3];
> + hdrs[i].ptp = hbuf[(8 * i) + 4];
> + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 5]) << 8;
> + hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 6]) << 16;
> + msg_cdbg2("SFDP parameter table header %d/%d:\n", i, nph);
> + msg_cdbg2(" ID 0x%02x, version %d.%d\n", hdrs[i].id,
> + hdrs[i].v_major, hdrs[i].v_minor);
> + len = hdrs[i].len * 4;
> + tmp32 = hdrs[i].ptp;
> + msg_cdbg2(" Length %d B, Parameter Table Pointer 0x%06x\n",
> + len, tmp32);
> +
> + if (len + tmp32 > UINT16_MAX) {
> + msg_cerr("SFDP Parameter Table %d supposedly "
> + "overflows addressable SFDP area. This most\n"
> + "probably indicates a corrupt SFDP parameter "
> + "table header. Aborting SFDP probe!\n", i);
> + ret = 0;
> + goto cleanup_hdrs;
> + }
> +
> + tbuf = malloc(len);
> + if (tbuf == NULL) {
> + msg_gerr("Out of memory!\n");
insert the following code:
ret = 0;
goto cleanup_hdrs;
> + exit(1); /* FIXME: shutdown gracefully */
and kill the exit(1)
> + }
> + if (sfdp_fetch_pt(flash, tmp32, tbuf, len)){
> + msg_cerr("Fetching SFDP parameter table %d failed.\n",
> + i);
> + free(tbuf);
> + break;
> + }
> + if (i == 0) { /* Mandatory JEDEC SFDP parameter table */
> + if (hdrs[i].id != 0)
> + msg_cdbg("ID of the mandatory JEDEC SFDP "
msg_cerr, then cleanup and return 0. Maybe even ask user to report?
> + "parameter table is not 0 as demanded "
> + "by JESD216 (warning only).\n");
Check hdrs[i].v_major here and do the error dance for unexpected values.
> +
> + if (len != 9 * 4 && len != 4 * 4) {
> + msg_cdbg("Length of the mandatory JEDEC SFDP "
msg_cerr, then cleanup and return 0. Maybe even ask user to report?
> + "parameter table is %d B instead of "
> + "36 B (i.e. 9 double words) as "
> + "demanded by JESD216, skipping "
> + "parsing.\n", len);
> + } else if (sfdp_fill_flash(flash, tbuf, len) == 0)
> + ret = 1;
> + }
> +
> + free(tbuf);
> + i++;
> + } while(i <= nph);
> +
> +cleanup_hdrs:
> + free(hdrs);
> + free(hbuf);
> + return ret;
> +}
Cross-checked against the standard, looks pretty good.
Next round will be acked.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
9
Author: stefanct
Date: Thu Feb 16 22:07:07 2012
New Revision: 1499
URL: http://flashrom.org/trac/flashrom/changeset/1499
Log:
Add a bunch of new/tested stuff and various small changes 10
Tested mainboards:
OK:
- ABIT A-S78H
http://www.flashrom.org/pipermail/flashrom/2012-January/008603.html
- ASRock AM2NF6G-VSTA
http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html
- ASUS KFSN4-DRE/SAS
reported by ted on IRC
- ASUS M2A-VM (HDMI variant)
http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html
- ASUS M4N78 PRO
http://www.flashrom.org/pipermail/flashrom/2012-January/008598.html
- ASUS P5K-V
http://www.flashrom.org/pipermail/flashrom/2012-February/008737.html
- ASUS P5KPL-CM
http://www.flashrom.org/pipermail/flashrom/2012-January/008522.html
- ASUS P5N7A-VM
http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html
- ASUS P5QPL-AM
http://www.flashrom.org/pipermail/flashrom/2012-January/008557.html
- ECS GF7100PVT-M3
http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html
- ECS K7SEM
http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html
- ECS P4M800PRO-M V2.0
http://www.flashrom.org/pipermail/flashrom/2012-January/008478.html
- Gigabyte 880GMA-USB3
http://www.flashrom.org/pipermail/flashrom/2012-February/008715.html
- Gigabyte GA-EP31-DS3L
http://www.flashrom.org/pipermail/flashrom/2012-January/008601.html
- Gigabyte GA-X58A-UDR3
http://www.flashrom.org/pipermail/flashrom/2012-January/008572.html
- Gigabyte GA-Z68XP-UD3
http://paste.flashrom.org/view.php?id=1058
- HP ProLiant N40L
http://www.flashrom.org/pipermail/flashrom/2012-February/008650.html
- MSI MS-7309 (K9N6PGM2-V2)
http://www.flashrom.org/pipermail/flashrom/2011-December/008441.html
- MSI MS-7548 (Aspen-GL8E used in HP Pavilion a6750f)
http://www.flashrom.org/pipermail/flashrom/2012-February/008666.html
- MSI MS-7676 (H67MA-ED55(B3))
http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html
- PC Engines Alix.6f2
Reported by Philip Prindeville on IRC
- Shuttle AV18E2
http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html
- Supermicro X8DTE-F
http://www.flashrom.org/pipermail/flashrom/2011-November/008304.html
- Supermicro X8DTT-HIBQF
http://www.flashrom.org/pipermail/flashrom/2012-January/008520.html
NOT OK:
- ASUS P8H61-M LE/USB3
http://www.flashrom.org/pipermail/flashrom/2012-January/008491.html
- ASUS P8H67-M PRO
http://www.flashrom.org/pipermail/flashrom/2011-December/008321.html
- ASUS P8Z68-V PRO
http://www.flashrom.org/pipermail/flashrom/2012-January/008469.html
- Clevo P150HM (laptop)
http://www.flashrom.org/pipermail/flashrom/2012-February/008717.html
- Intel D425KT
http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html
- Supermicro X9SCA-F
http://www.flashrom.org/pipermail/flashrom/2011-December/008313.html
Tested flash chips:
- mark AT29C512 as TEST_OK_PREW
http://paste.flashrom.org/view.php?id=977
- mark M25P40 as TEST_OK_PREW
http://www.flashrom.org/pipermail/flashrom/2011-December/008351.html
- mark M25PE80 as TEST_OK_PREW
http://paste.flashrom.org/view.php?id=1061
- mark MX25L6405 as TEST_OK_PREW
tested myself with an MX25L6436E variant on serprog
- mark W39V080A as TEST_OK_PREW
http://www.flashrom.org/pipermail/flashrom/2012-January/008509.html
Tested chipsets:
- SiS 730 (:0730)
http://www.flashrom.org/pipermail/flashrom/2011-December/008362.html
- NVIDIA MCP61 (:03e0)
http://www.flashrom.org/pipermail/flashrom/2012-January/008534.html
- NVIDIA MCP73 (:07d7)
http://www.flashrom.org/pipermail/flashrom/2011-December/008412.html
- NVIDIA MCP79 (:0aac)
http://www.flashrom.org/pipermail/flashrom/2012-January/008508.html
- VIA VT82C69x (0691) and VT82C686A/B (:0686)
http://www.flashrom.org/pipermail/flashrom/2011-December/008459.html
- AMD's SB950 (and presumably also SB920) have the same PCI ID as previous
generations, hence change the chipset enable device string. Thanks to
Christian Ruppert for the suggestion.
- Fix the board enable of the abit NF-M2 nView which had the IDs of its onboard
graphics card in its pattern. Change this to the LPC controller.
- Intel X79 SPI registers are identical to 6 Series', so use the chipsetenable
wrapper of it (enable_flash_pch6).
- Fix two paranoid checks for address < 0 in ichspi.c which became futile (and
generate clang warnings) with the unsignify patch committed in r1470.
- Rename AT25DF641 to AT25DF641(A). They are almost idencical, but could
be distinguished by an extended RDID probe (Atmel's patented EDI procedure),
which we do not support yet, hence handle them as one model for now.
- Source format fixes and typos
the addition of the ASRock AM2NF6G-VSTA to print.c is
Signed-off-by: Paul Menzel <paulepanter(a)users.sourceforge.net>
everything else is
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/board_enable.c
trunk/chipset_enable.c
trunk/dediprog.c
trunk/dummyflasher.c
trunk/flashchips.c
trunk/flashchips.h
trunk/ichspi.c
trunk/print.c
Modified: trunk/board_enable.c
==============================================================================
--- trunk/board_enable.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/board_enable.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -1562,7 +1562,7 @@
/*
* Suited for:
* - AOpen i945GMx-VFX: Intel 945GM + ICH7-M used in ...
- * - FCS ESPRIMO Q5010 (SMBIOS: D2544-B1)
+ * - FSC ESPRIMO Q5010 (SMBIOS: D2544-B1)
*/
static int intel_ich_gpio38_raise(void)
{
@@ -2114,7 +2114,7 @@
{0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, P3, "abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise},
{0x10de, 0x0050, 0x147b, 0x1c1a, 0, 0, 0, 0, NULL, NULL, NULL, P3, "abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower},
{0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, P3, "abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise},
- {0x10de, 0x02f0, 0x147b, 0x1c26, 0x10de, 0x0240, 0x10de, 0x0222, NULL, NULL, NULL, P3, "abit", "NF-M2 nView", 0, OK, nvidia_mcp_gpio4_lower},
+ {0x10de, 0x02f0, 0x147b, 0x1c26, 0x10de, 0x0260, 0x147b, 0x1c26, NULL, NULL, NULL, P3, "abit", "NF-M2 nView", 0, OK, nvidia_mcp_gpio4_lower},
{0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, "(VA6)$", NULL, NULL, P3, "abit", "VA6", 0, OK, via_apollo_gpo4_lower},
{0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", P3, "abit", "VT6X4", 0, OK, via_apollo_gpo4_lower},
{0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, P3, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd},
Modified: trunk/chipset_enable.c
==============================================================================
--- trunk/chipset_enable.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/chipset_enable.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -1155,7 +1155,7 @@
#if defined(__i386__) || defined(__x86_64__)
{0x1002, 0x4377, OK, "ATI", "SB400", enable_flash_sb400},
{0x1002, 0x438d, OK, "AMD", "SB600", enable_flash_sb600},
- {0x1002, 0x439d, OK, "AMD", "SB700/SB710/SB750/SB850", enable_flash_sb600},
+ {0x1002, 0x439d, OK, "AMD", "SB7x0/SB8x0/SB9x0", enable_flash_sb600},
{0x100b, 0x0510, NT, "AMD", "SC1100", enable_flash_sc1100},
{0x1022, 0x2080, OK, "AMD", "CS5536", enable_flash_cs5536},
{0x1022, 0x2090, OK, "AMD", "CS5536", enable_flash_cs5536},
@@ -1178,7 +1178,7 @@
{0x1039, 0x0651, OK, "SiS", "651", enable_flash_sis540},
{0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis540},
{0x1039, 0x0661, OK, "SiS", "661", enable_flash_sis540},
- {0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis540},
+ {0x1039, 0x0730, OK, "SiS", "730", enable_flash_sis540},
{0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis540},
{0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis540},
{0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis540},
@@ -1222,7 +1222,7 @@
{0x10de, 0x0365, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0366, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */
- {0x10de, 0x03e0, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
+ {0x10de, 0x03e0, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x03e1, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x03e2, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
{0x10de, 0x03e3, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x},
@@ -1233,8 +1233,8 @@
{0x10de, 0x0548, OK, "NVIDIA", "MCP67", enable_flash_mcp6x_7x},
{0x10de, 0x075c, NT, "NVIDIA", "MCP78S", enable_flash_mcp6x_7x},
{0x10de, 0x075d, OK, "NVIDIA", "MCP78S", enable_flash_mcp6x_7x},
- {0x10de, 0x07d7, NT, "NVIDIA", "MCP73", enable_flash_mcp6x_7x},
- {0x10de, 0x0aac, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
+ {0x10de, 0x07d7, OK, "NVIDIA", "MCP73", enable_flash_mcp6x_7x},
+ {0x10de, 0x0aac, OK, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
{0x10de, 0x0aad, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
{0x10de, 0x0aae, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
{0x10de, 0x0aaf, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x},
@@ -1243,12 +1243,12 @@
{0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge},
{0x1106, 0x0597, NT, "VIA", "VT82C597", via_no_byte_merge},
{0x1106, 0x0601, NT, "VIA", "VT8601/VT8601A", via_no_byte_merge},
- {0x1106, 0x0691, NT, "VIA", "VT82C69x", via_no_byte_merge}, /* 691, 693a, 694t, 694x checked */
+ {0x1106, 0x0691, OK, "VIA", "VT82C69x", via_no_byte_merge},
{0x1106, 0x8601, NT, "VIA", "VT8601T", via_no_byte_merge},
/* VIA southbridges */
{0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111},
{0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111},
- {0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111},
+ {0x1106, 0x0686, OK, "VIA", "VT82C686A/B", enable_flash_amd8111},
{0x1106, 0x3074, OK, "VIA", "VT8233", enable_flash_vt823x},
{0x1106, 0x3147, OK, "VIA", "VT8233A", enable_flash_vt823x},
{0x1106, 0x3177, OK, "VIA", "VT8235", enable_flash_vt823x},
@@ -1279,8 +1279,8 @@
{0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6},
{0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6},
{0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_pch6},
- {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */
- {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */
+ {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_pch6},
+ {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_pch6},
{0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e},
{0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e},
{0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e},
Modified: trunk/dediprog.c
==============================================================================
--- trunk/dediprog.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/dediprog.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -299,7 +299,7 @@
return 0;
}
-/* Bulk write interface, will read multiple page_size byte chunks aligned to page_size bytes.
+/* Bulk write interface, will write multiple page_size byte chunks aligned to page_size bytes.
* @start start address
* @len length
* @return 0 on success, 1 on failure
Modified: trunk/dummyflasher.c
==============================================================================
--- trunk/dummyflasher.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/dummyflasher.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -435,7 +435,7 @@
msg_perr("No command sent to the chip!\n");
return 1;
}
- /* spi_blacklist has precedence before spi_ignorelist. */
+ /* spi_blacklist has precedence over spi_ignorelist. */
for (i = 0; i < spi_blacklist_size; i++) {
if (writearr[0] == spi_blacklist[i]) {
msg_pdbg("Refusing blacklisted SPI command 0x%02x\n",
Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/flashchips.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -1579,7 +1579,7 @@
{
.vendor = "Atmel",
- .name = "AT25DF641",
+ .name = "AT25DF641(A)",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF641,
@@ -1967,7 +1967,7 @@
.total_size = 64,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10000, /* 10mS, Enter=Exec */
.block_erasers =
@@ -4427,7 +4427,7 @@
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_OK_PROBE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -4957,7 +4957,7 @@
.model_id = ST_M25PE80,
.total_size = 1024,
.page_size = 256,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -6910,7 +6910,7 @@
.model_id = ST_M25P40,
.total_size = 512,
.page_size = 256,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -8690,9 +8690,9 @@
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
- .probe_timing = 10,
+ .probe_timing = 10,
.block_erasers =
{
{
Modified: trunk/flashchips.h
==============================================================================
--- trunk/flashchips.h Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/flashchips.h Thu Feb 16 22:07:07 2012 (r1499)
@@ -364,7 +364,7 @@
#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005 */
#define MACRONIX_MX25L1605 0x2015 /* MX25L1605{,A,D} */
#define MACRONIX_MX25L3205 0x2016 /* MX25L3205{,A} */
-#define MACRONIX_MX25L6405 0x2017 /* MX25L3205{,D} */
+#define MACRONIX_MX25L6405 0x2017 /* MX25L6405{,D}, MX25L6406E, MX25L6436E */
#define MACRONIX_MX25L12805 0x2018 /* MX25L12805 */
#define MACRONIX_MX25L1635D 0x2415
#define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */
Modified: trunk/ichspi.c
==============================================================================
--- trunk/ichspi.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/ichspi.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -1286,7 +1286,7 @@
uint16_t timeout = 100 * 60;
uint8_t block_len;
- if (addr < 0 || addr + len > flash->total_size * 1024) {
+ if (addr + len > flash->total_size * 1024) {
msg_perr("Request to read from an inaccessible memory address "
"(addr=0x%x, len=%d).\n", addr, len);
return -1;
@@ -1324,7 +1324,7 @@
uint16_t timeout = 100 * 60;
uint8_t block_len;
- if (addr < 0 || addr + len > flash->total_size * 1024) {
+ if (addr + len > flash->total_size * 1024) {
msg_perr("Request to write to an inaccessible memory address "
"(addr=0x%x, len=%d).\n", addr, len);
return -1;
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Thu Feb 16 22:00:27 2012 (r1498)
+++ trunk/print.c Thu Feb 16 22:07:07 2012 (r1499)
@@ -546,6 +546,7 @@
const struct board_info boards_known[] = {
#if defined(__i386__) || defined(__x86_64__)
B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
+ B("abit", "A-S78H", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL),
B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
B("abit", "AV8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL),
@@ -565,7 +566,7 @@
B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
B("agami", "Aruma", 1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL),
B("Albatron", "PM266A Pro", 1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */
- B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FCS (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
+ B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
B("AOpen", "vKM400Am-S", 1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL),
B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL),
@@ -576,6 +577,7 @@
B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
+ B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
@@ -594,7 +596,7 @@
B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
- B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
+ B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
@@ -614,8 +616,9 @@
B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
+ B("ASUS", "KFSN4-DRE/SAS", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
- B("ASUS", "M2A-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"),
+ B("ASUS", "M2A-VM (HDMI)", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
@@ -629,12 +632,13 @@
B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
- B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
+ B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
+ B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."),
@@ -670,8 +674,10 @@
B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."),
+ B("ASUS", "P5K-V", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
+ B("ASUS", "P5KPL-CM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
B("ASUS", "P5LD2", 0, NULL, "Untested board enable."),
@@ -682,8 +688,10 @@
B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
+ B("ASUS", "P5N7A-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
+ B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
@@ -693,7 +701,10 @@
B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
+ B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
@@ -710,10 +721,12 @@
B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL),
B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL),
+ B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL),
B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL),
B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL),
+ B("Elitegroup", "K7SEM (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL),
B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),
- B("Elitegroup", "P4M800PRO-M (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
+ B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL),
B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL),
B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL),
@@ -743,6 +756,7 @@
B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
+ B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
@@ -751,6 +765,7 @@
B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
+ B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
@@ -774,10 +789,13 @@
B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL),
+ B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL),
B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
+ B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL),
B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL),
B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL),
+ B("HP", "ProLiant N40L", 1, NULL, NULL),
B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL),
@@ -787,6 +805,7 @@
B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL),
B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
+ B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
@@ -830,6 +849,7 @@
B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."),
+ B("MSI", "MS-7309 (K9N6PGM2-V2)", 1, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
@@ -837,12 +857,14 @@
B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
+ B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL),
B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL),
B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
+ B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
@@ -855,6 +877,7 @@
B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL),
B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL),
B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL),
+ B("PC Engines", "Alix.6f2", 1, "http://pcengines.ch/alix6f2.htm", NULL),
B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL),
B("Portwell", "PEB-4700VLA", 1, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
B("RCA", "RM4100", 1, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
@@ -862,6 +885,7 @@
B("Shuttle", "AK31", 1, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
B("Shuttle", "AV11V30", 1, NULL, NULL),
+ B("Shuttle", "AV18E2", 1, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
@@ -880,12 +904,15 @@
B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL),
B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
+ B("Supermicro", "X8DTE-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL),
B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
+ B("Supermicro", "X8DTT-HIBQF", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
+ B("Supermicro", "X9SCA-F", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
@@ -951,11 +978,12 @@
B("ASUS", "A8Jm", 1, NULL, NULL),
B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
+ B("Clevo", "P150HM", 0, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
- B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25x64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
+ B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."),
B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL),
#endif
1
0
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Index: flashrom-linux_spi_documentation/Makefile
===================================================================
--- flashrom-linux_spi_documentation/Makefile (Revision 1495)
+++ flashrom-linux_spi_documentation/Makefile (Arbeitskopie)
@@ -209,6 +209,14 @@
endif
endif
+ifneq ($(TARGET_OS), Linux)
+ifeq ($(CONFIG_LINUX_SPI), yes)
+UNSUPPORTED_FEATURES += CONFIG_LINUX_SPI=yes
+else
+override CONFIG_LINUX_SPI = no
+endif
+endif
+
# Determine the destination processor architecture.
# IMPORTANT: The following line must be placed before ARCH is ever used
# (of course), but should come after any lines setting CC because the line
@@ -324,16 +332,15 @@
# Always enable Bus Pirate SPI for now.
CONFIG_BUSPIRATE_SPI ?= yes
-# Disable Linux spidev interface support for now, until we check for a Linux
-# device (not host, as DOS binaries for example are built on a Linux host).
-CONFIG_LINUX_SPI ?= no
-
# Disable Dediprog SF100 until support is complete and tested.
CONFIG_DEDIPROG ?= no
# Always enable Marvell SATA controllers for now.
CONFIG_SATAMV ?= yes
+# Enable Linux spidev interface by default. We disable it on non-Linux targets.
+CONFIG_LINUX_SPI ?= yes
+
# Disable wiki printing by default. It is only useful if you have wiki access.
CONFIG_PRINT_WIKI ?= no
@@ -465,11 +472,6 @@
NEED_SERIAL := yes
endif
-ifeq ($(CONFIG_LINUX_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_LINUX_SPI=1'
-PROGRAMMER_OBJS += linux_spi.o
-endif
-
ifeq ($(CONFIG_DEDIPROG), yes)
FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
FEATURE_LIBS += -lusb
@@ -482,6 +484,11 @@
NEED_PCI := yes
endif
+ifeq ($(CONFIG_LINUX_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_LINUX_SPI=1'
+PROGRAMMER_OBJS += linux_spi.o
+endif
+
ifeq ($(NEED_SERIAL), yes)
LIB_OBJS += serial.o
endif
Index: flashrom-linux_spi_documentation/flashrom.8
===================================================================
--- flashrom-linux_spi_documentation/flashrom.8 (Revision 1495)
+++ flashrom-linux_spi_documentation/flashrom.8 (Arbeitskopie)
@@ -205,6 +205,8 @@
.sp
.BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)"
.sp
+.BR "* linux_spi" " (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)"
+.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
.B PROGRAMMER SPECIFIC INFO
@@ -607,6 +609,17 @@
.sp
More information about the hardware is available at
.BR http://wiki.opengraphics.org .
+.TP
+.BR "linux_spi " programmer
+You have to specify the SPI controller to use with the
+.sp
+.B " flashrom \-p linux_spi:dev=/dev/spidevX.Y"
+.sp
+syntax where
+.B /dev/spidevX.Y
+is the Linux device node for your SPI controller.
+.sp
+Please note that the linux_spi driver only works on Linux.
.SH EXIT STATUS
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
Index: flashrom-linux_spi_documentation/print.c
===================================================================
--- flashrom-linux_spi_documentation/print.c (Revision 1495)
+++ flashrom-linux_spi_documentation/print.c (Arbeitskopie)
@@ -527,6 +527,11 @@
programmer_table[PROGRAMMER_SATAMV].name);
print_supported_pcidevs(satas_mv);
#endif
+#if CONFIG_LINUX_SPI == 1
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
+ programmer_table[PROGRAMMER_LINUX_SPI].name);
+ msg_ginfo("Device files /dev/spidev*.*\n");
+#endif
}
#if CONFIG_INTERNAL == 1
--
http://www.hailfinger.org/
2
4
Forced read functionality was disabled when programmer registration was
merged in r.
We now support registering more than one controller at once for each bus
type. This can happen e.g. if one SPI controller has an attached flash
chip and one controller doesn't. In such a case we rely on the probe
mechanism to find exactly one chip, and the probe mechanism will
remember which controller/bus the flash chip is attached to. A forced
read does not have the luxury of knowing which compatible controller to
use, so this case is handled by always picking the first one. That may
or may not be the correct one, but there is no way (yet) to specify
which controller a flash chip is attached to.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Index: flashrom-forced_read_reenable/cli_classic.c
===================================================================
--- flashrom-forced_read_reenable/cli_classic.c (Revision 1495)
+++ flashrom-forced_read_reenable/cli_classic.c (Arbeitskopie)
@@ -456,11 +456,27 @@
printf("Note: flashrom can never write if the flash "
"chip isn't found automatically.\n");
}
-#if 0 // FIXME: What happens for a forced chip read if multiple compatible programmers are registered?
if (force && read_it && chip_to_probe) {
+ struct registered_programmer *pgm;
+ int compatible_programmers = 0;
printf("Force read (-f -r -c) requested, pretending "
"the chip is there:\n");
- startchip = probe_flash(0, &flashes[0], 1);
+ /* This loop just counts compatible controllers. */
+ for (j = 0; j < registered_programmer_count; j++) {
+ pgm = ®istered_programmers[j];
+ if (pgm->buses_supported & flashes[0].bustype)
+ compatible_programmers++;
+ }
+ if (compatible_programmers > 1)
+ printf("More than one compatible controller "
+ "found for the requested flash chip, "
+ "using the first one.\n");
+ for (j = 0; j < registered_programmer_count; j++) {
+ pgm = ®istered_programmers[j];
+ startchip = probe_flash(pgm, 0, &flashes[0], 1);
+ if (startchip != -1)
+ break;
+ }
if (startchip == -1) {
printf("Probing for flash chip '%s' failed.\n",
chip_to_probe);
@@ -471,7 +487,6 @@
"contain garbage.\n");
return read_flash_to_file(&flashes[0], filename);
}
-#endif
ret = 1;
goto out_shutdown;
} else if (!chip_to_probe) {
--
http://www.hailfinger.org/
2
4
Author: hailfinger
Date: Thu Feb 16 22:00:27 2012
New Revision: 1498
URL: http://flashrom.org/trac/flashrom/changeset/1498
Log:
Document and enable the linux_spi driver
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/Makefile
trunk/flashrom.8
trunk/print.c
Modified: trunk/Makefile
==============================================================================
--- trunk/Makefile Thu Feb 16 21:55:27 2012 (r1497)
+++ trunk/Makefile Thu Feb 16 22:00:27 2012 (r1498)
@@ -209,6 +209,14 @@
endif
endif
+ifneq ($(TARGET_OS), Linux)
+ifeq ($(CONFIG_LINUX_SPI), yes)
+UNSUPPORTED_FEATURES += CONFIG_LINUX_SPI=yes
+else
+override CONFIG_LINUX_SPI = no
+endif
+endif
+
# Determine the destination processor architecture.
# IMPORTANT: The following line must be placed before ARCH is ever used
# (of course), but should come after any lines setting CC because the line
@@ -324,16 +332,15 @@
# Always enable Bus Pirate SPI for now.
CONFIG_BUSPIRATE_SPI ?= yes
-# Disable Linux spidev interface support for now, until we check for a Linux
-# device (not host, as DOS binaries for example are built on a Linux host).
-CONFIG_LINUX_SPI ?= no
-
# Disable Dediprog SF100 until support is complete and tested.
CONFIG_DEDIPROG ?= no
# Always enable Marvell SATA controllers for now.
CONFIG_SATAMV ?= yes
+# Enable Linux spidev interface by default. We disable it on non-Linux targets.
+CONFIG_LINUX_SPI ?= yes
+
# Disable wiki printing by default. It is only useful if you have wiki access.
CONFIG_PRINT_WIKI ?= no
@@ -465,11 +472,6 @@
NEED_SERIAL := yes
endif
-ifeq ($(CONFIG_LINUX_SPI), yes)
-FEATURE_CFLAGS += -D'CONFIG_LINUX_SPI=1'
-PROGRAMMER_OBJS += linux_spi.o
-endif
-
ifeq ($(CONFIG_DEDIPROG), yes)
FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
FEATURE_LIBS += -lusb
@@ -482,6 +484,11 @@
NEED_PCI := yes
endif
+ifeq ($(CONFIG_LINUX_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_LINUX_SPI=1'
+PROGRAMMER_OBJS += linux_spi.o
+endif
+
ifeq ($(NEED_SERIAL), yes)
LIB_OBJS += serial.o
endif
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Thu Feb 16 21:55:27 2012 (r1497)
+++ trunk/flashrom.8 Thu Feb 16 22:00:27 2012 (r1498)
@@ -205,6 +205,8 @@
.sp
.BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)"
.sp
+.BR "* linux_spi" " (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)"
+.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
.B PROGRAMMER SPECIFIC INFO
@@ -639,6 +641,17 @@
.sp
More information about the hardware is available at
.BR http://wiki.opengraphics.org .
+.SS
+.BR "linux_spi " programmer
+You have to specify the SPI controller to use with the
+.sp
+.B " flashrom \-p linux_spi:dev=/dev/spidevX.Y"
+.sp
+syntax where
+.B /dev/spidevX.Y
+is the Linux device node for your SPI controller.
+.sp
+Please note that the linux_spi driver only works on Linux.
.SH EXIT STATUS
flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Thu Feb 16 21:55:27 2012 (r1497)
+++ trunk/print.c Thu Feb 16 22:00:27 2012 (r1498)
@@ -527,6 +527,11 @@
programmer_table[PROGRAMMER_SATAMV].name);
print_supported_pcidevs(satas_mv);
#endif
+#if CONFIG_LINUX_SPI == 1
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
+ programmer_table[PROGRAMMER_LINUX_SPI].name);
+ msg_ginfo("Device files /dev/spidev*.*\n");
+#endif
}
#if CONFIG_INTERNAL == 1
1
0
Am 16.02.2012 21:44 schrieb Stefan Tauner:
> The sections describing the various options of the internal and dummy
> programmers have grown out of proportions. This patch adds some headlines
> to devide the unrelated topics a bit (with .TP commands). The previous indented
> paragraphs for the various programmers were transformed to subsections (.SS).
>
> Also, rephrase the documention related to laptops completely to make it
> less redundant and more informative.
> Document the laptop=this_is_not_a_laptop internal programmer parameter
>
> Change the contact info in the bugs section by removing the trac
> reference and adding IRC (and the pastebin) instead.
>
> Remove some superfluous white space.
>
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
1
Author: stefanct
Date: Thu Feb 16 21:55:27 2012
New Revision: 1497
URL: http://flashrom.org/trac/flashrom/changeset/1497
Log:
Manpage improvements.
The sections describing the various options of the internal and dummy
programmers have grown out of proportions. This patch adds some headlines
to devide the unrelated topics a bit (with .TP commands). The previous indented
paragraphs for the various programmers were transformed to subsections (.SS).
Also, rephrase the documention related to laptops completely to make it
less redundant and more informative.
Document the laptop=this_is_not_a_laptop internal programmer parameter
Change the contact info in the bugs section by removing the trac
reference and adding IRC (and the pastebin) instead.
Remove some superfluous white space and a .RE (restore indentation) command.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified:
trunk/flashrom.8
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Thu Feb 16 21:31:25 2012 (r1496)
+++ trunk/flashrom.8 Thu Feb 16 21:55:27 2012 (r1497)
@@ -1,4 +1,4 @@
-.TH FLASHROM 8 "Jul 25, 2011"
+.TH FLASHROM 8 "Feb 15, 2012"
.SH NAME
flashrom \- detect, read, write, verify and erase flash chips
.SH SYNOPSIS
@@ -223,8 +223,11 @@
colon. While some programmers take arguments at fixed positions, other
programmers use a key/value interface in which the key and value is separated
by an equal sign and different pairs are separated by a comma or a colon.
-.TP
+.SS
.BR "internal " programmer
+.TP
+.B Board Enables
+.sp
Some mainboards require to run mainboard specific code to enable flash erase
and write support (and probe support on old systems with parallel flash).
The mainboard brand and model (if it requires specific code) is usually
@@ -275,17 +278,22 @@
enable is going to fail. In any case (success or failure), please report to
the flashrom mailing list, see below.
.sp
+.TP
+.B Coreboot
+.sp
On systems running coreboot, flashrom checks whether the desired image matches
your mainboard. This needs some special board ID to be present in the image.
If flashrom detects that the image you want to write and the current board
do not match, it will refuse to write the image unless you specify
.sp
.B " flashrom \-p internal:boardmismatch=force"
+.TP
+.B ITE IT87 Super I/O
.sp
If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus
translation, flashrom should autodetect that configuration. If you want to
set the I/O base port of the IT87 series SPI controller manually instead of
-using the value provided by the BIOS, use the
+using the value provided by the BIOS, use the
.sp
.B " flashrom \-p internal:it87spiport=portnum"
.sp
@@ -295,6 +303,9 @@
flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug
report so we can diagnose the problem.
.sp
+.TP
+.B Intel chipsets
+.sp
If you have an Intel chipset with an ICH8 or later southbridge with SPI flash
attached, and if a valid descriptor was written to it (e.g. by the vendor), the
chipset provides an alternative way to access the flash chip(s) named
@@ -346,6 +357,8 @@
.sp
Example:
.B "flashrom \-p internal:fwh_idsel=0x001122334567"
+.TP
+.B Laptops
.sp
Using flashrom on laptops is dangerous and may easily make your hardware
unusable (see also the
@@ -353,21 +366,31 @@
section). The embedded controller (EC) in these
machines often interacts badly with flashing.
.B http://www.flashrom.org/Laptops
-has more information. If flash is shared with the EC, erase is guaranteed to
-brick your laptop and write is very likely to brick your laptop.
-Chip read and probe may irritate your EC and cause fan failure, backlight
-failure, sudden poweroff, and other nasty effects.
-flashrom will attempt to detect laptops and abort immediately for safety
-reasons.
-If you want to proceed anyway at your own risk, use
+has more information. For example the EC firmware sometimes resides on the same
+flash chip as the host firmware. While flashrom tries to change the contents of
+that memory the EC might need to fetch new instructions or data from it and
+could stop working correctly. Probing for and reading from the chip may also
+irritate your EC and cause fan failure, backlight failure, sudden poweroff, and
+other nasty effects. flashrom will attempt to detect if it is running on a
+laptop and abort immediately for safety reasons if it clearly identifies the
+host computer as one. If you want to proceed anyway at your own risk, use
.sp
.B " flashrom \-p internal:laptop=force_I_want_a_brick"
.sp
-You have been warned.
-.sp
We will not help you if you force flashing on a laptop because this is a really
dumb idea.
-.TP
+.sp
+You have been warned.
+.sp
+Currently we rely on the chassis type encoded in the DMI/SMBIOS data to detect
+laptops. Some vendors did not implement those bits correctly or set them to
+generic and/or dummy values. flashrom will then issue a warning and bail out
+like above. In this case you can use
+.sp
+.B " flashrom \-p internal:laptop=this_is_not_a_laptop"
+.sp
+to tell flashrom (at your own risk) that it does not running on a laptop.
+.SS
.BR "dummy " programmer
The dummy programmer operates on a buffer in memory only. It provides a safe
and fast way to test various aspects of flashrom and is mainly used in
@@ -409,6 +432,8 @@
.sp
Example:
.B "flashrom -p dummy:emulate=SST25VF040.REMS"
+.TP
+.B Persistent images
.sp
If you use flash chip emulation, flash image persistence is available as well
by using the
@@ -422,6 +447,8 @@
.sp
Example:
.B "flashrom -p dummy:emulate=M25P10.RES,image=dummy.bin"
+.TP
+.B SPI write chunk size
.sp
If you use SPI flash chip emulation for a chip which supports SPI page write
with the default opcode, you can set the maximum allowed write chunk size with
@@ -436,6 +463,8 @@
Example:
.sp
.B " flashrom -p dummy:emulate=M25P10.RES,spi_write_256_chunksize=5"
+.TP
+.B SPI blacklist
.sp
To simulate a programmer which refuses to send certain SPI commands to the
flash chip, you can specify a blacklist of SPI commands with the
@@ -448,6 +477,9 @@
commandlist may be up to 512 characters (256 commands) long.
Implementation note: flashrom will detect an error during command execution.
.sp
+.TP
+.B SPI ignorelist
+.sp
To simulate a flash chip which ignores (doesn't support) certain SPI commands,
you can specify an ignorelist of SPI commands with the
.sp
@@ -458,7 +490,7 @@
command 0x03 (READ) and command 0x02 (WRITE). commandlist may be up to 512
characters (256 commands) long.
Implementation note: flashrom won't detect an error during command execution.
-.TP
+.SS
.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " nicintel\
" , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii\
" , " satamv" ", and " atahpt " programmers
@@ -480,7 +512,7 @@
.sp
Example:
.B "flashrom \-p nic3com:pci=05:04.0"
-.TP
+.SS
.BR "ft2232_spi " programmer
An optional parameter specifies the controller
type and interface/port it should support. For that you have to use the
@@ -501,7 +533,7 @@
.B 4232H
and the default interface is
.BR B .
-.TP
+.SS
.BR "serprog " programmer
A mandatory parameter specifies either a serial
device/baud combination or an IP/port combination for communication with the
@@ -517,7 +549,7 @@
instead. More information about serprog is available in
.B serprog-protocol.txt
in the source distribution.
-.TP
+.SS
.BR "buspirate_spi " programmer
A required
.B dev
@@ -533,7 +565,7 @@
can be
.BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M " or " 8M
(in Hz). The default is the maximum frequency of 8 MHz.
-.TP
+.SS
.BR "dediprog " programmer
An optional
.B voltage
@@ -549,7 +581,7 @@
can be
.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V
or the equivalent in mV.
-.TP
+.SS
.BR "rayer_spi " programmer
The default I/O base address used for the parallel port is 0x378 and you can use
the optional
@@ -579,9 +611,9 @@
.BR "http://rayer.ic.cz/elektro/spipgm.htm " .
The schematic of the Xilinx DLC 5 was published at
.BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " .
-.TP
+.SS
.BR "ogp_spi " programmer
-The flash ROM chip to access must be specified with the
+The flash ROM chip to access must be specified with the
.B rom
parameter.
.sp
@@ -665,25 +697,37 @@
.B "/etc/rc.securelevel"
and rebooting, or rebooting into single user mode.
.SH BUGS
-Please report any bugs at
-.sp
-.B " http://www.flashrom.org/trac/flashrom/newticket"
-.sp
-or on the flashrom mailing list at
+Please report any bugs to the flashrom mailing list at
.B "<flashrom(a)flashrom.org>"
.sp
We recommend to subscribe first at
.sp
.B " http://www.flashrom.org/mailman/listinfo/flashrom"
.sp
-Using flashrom on laptops is dangerous and may easily make your hardware
-unusable unless you can desolder the flash chip and have a full flash chip
-backup. This is caused by the embedded controller (EC) present in many laptops,
-which interacts badly with any flash attempts. This is a hardware limitation
-and flashrom will attempt to detect it and abort immediately for safety reasons.
-.sp
-More information about flashrom on laptops is available from
+Many of the developers communicate via the
+.B "#flashrom"
+IRC channel on
+.BR chat.freenode.net .
+You are welcome to join and ask questions, send us bug and success reports there
+too. Please provide a way to contact you later (e.g. a mail address) and be
+patient if there is no immediate reaction. Also, we provide a pastebin service
+at
+.B http://paste.flashrom.org
+that is very useful when you want to share logs etc. without spamming the
+channel.
+.SS
+.B Laptops
.sp
+Using flashrom on laptops is dangerous and may easily make your hardware
+unusable. flashrom will attempt to detect if it is running on a laptop and abort
+immediately for safety reasons. Please see the detailed discussion of this topic
+and associated flashrom options in the
+.B Laptops
+paragraph in the
+.B internal programmer
+subsection of the
+.B PROGRAMMER SPECIFIC INFO
+section.
.B " http://www.flashrom.org/Laptops"
.SS
One-time programmable (OTP) memory and unique IDs
@@ -697,7 +741,6 @@
.sp
Similar to OTP memories are unique, factory programmed, unforgeable IDs.
They are not modifiable by the user at all.
-.RE
.SH LICENSE
.B flashrom
is covered by the GNU General Public License (GPL), version 2. Some files are
1
0
The sections describing the various options of the internal and dummy
programmers have grown out of proportions. This patch adds some headlines
to devide the unrelated topics a bit (with .TP commands). The previous indented
paragraphs for the various programmers were transformed to subsections (.SS).
Also, rephrase the documention related to laptops completely to make it
less redundant and more informative.
Document the laptop=this_is_not_a_laptop internal programmer parameter
Change the contact info in the bugs section by removing the trac
reference and adding IRC (and the pastebin) instead.
Remove some superfluous white space.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
---
flashrom.8 | 111 +++++++++++++++++++++++++++++++++++++++++------------------
1 files changed, 77 insertions(+), 34 deletions(-)
diff --git a/flashrom.8 b/flashrom.8
index 76aacba..782f30b 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -1,4 +1,4 @@
-.TH FLASHROM 8 "Jul 25, 2011"
+.TH FLASHROM 8 "Feb 15, 2012"
.SH NAME
flashrom \- detect, read, write, verify and erase flash chips
.SH SYNOPSIS
@@ -223,8 +223,11 @@ parameters. These parameters are separated from the programmer name by a
colon. While some programmers take arguments at fixed positions, other
programmers use a key/value interface in which the key and value is separated
by an equal sign and different pairs are separated by a comma or a colon.
-.TP
+.SS
.BR "internal " programmer
+.TP
+.B Board Enables
+.sp
Some mainboards require to run mainboard specific code to enable flash erase
and write support (and probe support on old systems with parallel flash).
The mainboard brand and model (if it requires specific code) is usually
@@ -275,17 +278,22 @@ has been written because it is known that writing/erasing without the board
enable is going to fail. In any case (success or failure), please report to
the flashrom mailing list, see below.
.sp
+.TP
+.B Coreboot
+.sp
On systems running coreboot, flashrom checks whether the desired image matches
your mainboard. This needs some special board ID to be present in the image.
If flashrom detects that the image you want to write and the current board
do not match, it will refuse to write the image unless you specify
.sp
.B " flashrom \-p internal:boardmismatch=force"
+.TP
+.B ITE IT87 Super I/O
.sp
If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus
translation, flashrom should autodetect that configuration. If you want to
set the I/O base port of the IT87 series SPI controller manually instead of
-using the value provided by the BIOS, use the
+using the value provided by the BIOS, use the
.sp
.B " flashrom \-p internal:it87spiport=portnum"
.sp
@@ -295,6 +303,9 @@ is the I/O port number (must be a multiple of 8). In the unlikely case
flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug
report so we can diagnose the problem.
.sp
+.TP
+.B Intel chipsets
+.sp
If you have an Intel chipset with an ICH8 or later southbridge with SPI flash
attached, and if a valid descriptor was written to it (e.g. by the vendor), the
chipset provides an alternative way to access the flash chip(s) named
@@ -346,6 +357,8 @@ settings. The default value for ICH7 is given in the example below.
.sp
Example:
.B "flashrom \-p internal:fwh_idsel=0x001122334567"
+.TP
+.B Laptops
.sp
Using flashrom on laptops is dangerous and may easily make your hardware
unusable (see also the
@@ -353,21 +366,31 @@ unusable (see also the
section). The embedded controller (EC) in these
machines often interacts badly with flashing.
.B http://www.flashrom.org/Laptops
-has more information. If flash is shared with the EC, erase is guaranteed to
-brick your laptop and write is very likely to brick your laptop.
-Chip read and probe may irritate your EC and cause fan failure, backlight
-failure, sudden poweroff, and other nasty effects.
-flashrom will attempt to detect laptops and abort immediately for safety
-reasons.
-If you want to proceed anyway at your own risk, use
+has more information. For example the EC firmware sometimes resides on the same
+flash chip as the host firmware. While flashrom tries to change the contents of
+that memory the EC might need to fetch new instructions or data from it and
+could stop working correctly. Probing for and reading from the chip may also
+irritate your EC and cause fan failure, backlight failure, sudden poweroff, and
+other nasty effects. flashrom will attempt to detect if it is running on a
+laptop and abort immediately for safety reasons if it clearly identifies the
+host computer as one. If you want to proceed anyway at your own risk, use
.sp
.B " flashrom \-p internal:laptop=force_I_want_a_brick"
.sp
-You have been warned.
-.sp
We will not help you if you force flashing on a laptop because this is a really
dumb idea.
-.TP
+.sp
+You have been warned.
+.sp
+Currently we rely on the chassis type encoded in the DMI/SMBIOS data to detect
+laptops. Some vendors did not implement those bits correctly or set them to
+generic and/or dummy values. flashrom will then issue a warning and bail out
+like above. In this case you can use
+.sp
+.B " flashrom \-p internal:laptop=this_is_not_a_laptop"
+.sp
+to tell flashrom (at your own risk) that it does not running on a laptop.
+.SS
.BR "dummy " programmer
The dummy programmer operates on a buffer in memory only. It provides a safe
and fast way to test various aspects of flashrom and is mainly used in
@@ -409,6 +432,8 @@ vendor):
.sp
Example:
.B "flashrom -p dummy:emulate=SST25VF040.REMS"
+.TP
+.B Persistent images
.sp
If you use flash chip emulation, flash image persistence is available as well
by using the
@@ -422,6 +447,8 @@ where the chip contents on flashrom shutdown are written to.
.sp
Example:
.B "flashrom -p dummy:emulate=M25P10.RES,image=dummy.bin"
+.TP
+.B SPI write chunk size
.sp
If you use SPI flash chip emulation for a chip which supports SPI page write
with the default opcode, you can set the maximum allowed write chunk size with
@@ -436,6 +463,8 @@ is the number of bytes (min. 1, max. 256).
Example:
.sp
.B " flashrom -p dummy:emulate=M25P10.RES,spi_write_256_chunksize=5"
+.TP
+.B SPI blacklist
.sp
To simulate a programmer which refuses to send certain SPI commands to the
flash chip, you can specify a blacklist of SPI commands with the
@@ -448,6 +477,9 @@ controller refuses to run command 0x03 (READ) and command 0x02 (WRITE).
commandlist may be up to 512 characters (256 commands) long.
Implementation note: flashrom will detect an error during command execution.
.sp
+.TP
+.B SPI ignorelist
+.sp
To simulate a flash chip which ignores (doesn't support) certain SPI commands,
you can specify an ignorelist of SPI commands with the
.sp
@@ -458,7 +490,7 @@ SPI commands. If commandlist is e.g. 0302, the emulated flash chip will ignore
command 0x03 (READ) and command 0x02 (WRITE). commandlist may be up to 512
characters (256 commands) long.
Implementation note: flashrom won't detect an error during command execution.
-.TP
+.SS
.BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " nicintel\
" , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii\
" , " satamv" ", and " atahpt " programmers
@@ -480,7 +512,7 @@ is the PCI function number of the desired device.
.sp
Example:
.B "flashrom \-p nic3com:pci=05:04.0"
-.TP
+.SS
.BR "ft2232_spi " programmer
An optional parameter specifies the controller
type and interface/port it should support. For that you have to use the
@@ -501,7 +533,7 @@ The default model is
.B 4232H
and the default interface is
.BR B .
-.TP
+.SS
.BR "serprog " programmer
A mandatory parameter specifies either a serial
device/baud combination or an IP/port combination for communication with the
@@ -517,7 +549,7 @@ syntax and for IP, you have to use
instead. More information about serprog is available in
.B serprog-protocol.txt
in the source distribution.
-.TP
+.SS
.BR "buspirate_spi " programmer
A required
.B dev
@@ -533,7 +565,7 @@ where
can be
.BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M " or " 8M
(in Hz). The default is the maximum frequency of 8 MHz.
-.TP
+.SS
.BR "dediprog " programmer
An optional
.B voltage
@@ -549,7 +581,7 @@ where
can be
.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V
or the equivalent in mV.
-.TP
+.SS
.BR "rayer_spi " programmer
The default I/O base address used for the parallel port is 0x378 and you can use
the optional
@@ -579,9 +611,9 @@ More information about the RayeR hardware is available at
.BR "http://rayer.ic.cz/elektro/spipgm.htm " .
The schematic of the Xilinx DLC 5 was published at
.BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " .
-.TP
+.SS
.BR "ogp_spi " programmer
-The flash ROM chip to access must be specified with the
+The flash ROM chip to access must be specified with the
.B rom
parameter.
.sp
@@ -665,25 +697,37 @@ in
.B "/etc/rc.securelevel"
and rebooting, or rebooting into single user mode.
.SH BUGS
-Please report any bugs at
-.sp
-.B " http://www.flashrom.org/trac/flashrom/newticket"
-.sp
-or on the flashrom mailing list at
+Please report any bugs to the flashrom mailing list at
.B "<flashrom(a)flashrom.org>"
.sp
We recommend to subscribe first at
.sp
.B " http://www.flashrom.org/mailman/listinfo/flashrom"
.sp
-Using flashrom on laptops is dangerous and may easily make your hardware
-unusable unless you can desolder the flash chip and have a full flash chip
-backup. This is caused by the embedded controller (EC) present in many laptops,
-which interacts badly with any flash attempts. This is a hardware limitation
-and flashrom will attempt to detect it and abort immediately for safety reasons.
-.sp
-More information about flashrom on laptops is available from
+Many of the developers communicate via the
+.B "#flashrom"
+IRC channel on
+.BR chat.freenode.net .
+You are welcome to join and ask questions, send us bug and success reports there
+too. Please provide a way to contact you later (e.g. a mail address) and be
+patient if there is no immediate reaction. Also, we provide a pastebin service
+at
+.B http://paste.flashrom.org
+that is very useful when you want to share logs etc. without spamming the
+channel.
+.SS
+.B Laptops
.sp
+Using flashrom on laptops is dangerous and may easily make your hardware
+unusable. flashrom will attempt to detect if it is running on a laptop and abort
+immediately for safety reasons. Please see the detailed discussion of this topic
+and associated flashrom options in the
+.B Laptops
+paragraph in the
+.B internal programmer
+subsection of the
+.B PROGRAMMER SPECIFIC INFO
+section.
.B " http://www.flashrom.org/Laptops"
.SS
One-time programmable (OTP) memory and unique IDs
@@ -697,7 +741,6 @@ printed when they are detected.
.sp
Similar to OTP memories are unique, factory programmed, unforgeable IDs.
They are not modifiable by the user at all.
-.RE
.SH LICENSE
.B flashrom
is covered by the GNU General Public License (GPL), version 2. Some files are
--
1.7.1
1
0
Author: hailfinger
Date: Thu Feb 16 21:31:25 2012
New Revision: 1496
URL: http://flashrom.org/trac/flashrom/changeset/1496
Log:
Reenable forced read
Forced read functionality was disabled when programmer registration was
merged in r1475.
We now support registering more than one controller at once for each bus
type. This can happen e.g. if one SPI controller has an attached flash
chip and one controller doesn't. In such a case we rely on the probe
mechanism to find exactly one chip, and the probe mechanism will
remember which controller/bus the flash chip is attached to. A forced
read does not have the luxury of knowing which compatible controller to
use, so this case is handled by always picking the first one. That may
or may not be the correct one, but there is no way (yet) to specify
which controller a flash chip is attached to.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/cli_classic.c
Modified: trunk/cli_classic.c
==============================================================================
--- trunk/cli_classic.c Thu Feb 16 02:43:06 2012 (r1495)
+++ trunk/cli_classic.c Thu Feb 16 21:31:25 2012 (r1496)
@@ -168,7 +168,7 @@
struct flashctx *fill_flash;
const char *name;
int namelen, opt, i, j;
- int startchip = 0, chipcount = 0, option_index = 0, force = 0;
+ int startchip = -1, chipcount = 0, option_index = 0, force = 0;
#if CONFIG_PRINT_WIKI == 1
int list_supported_wiki = 0;
#endif
@@ -456,11 +456,27 @@
printf("Note: flashrom can never write if the flash "
"chip isn't found automatically.\n");
}
-#if 0 // FIXME: What happens for a forced chip read if multiple compatible programmers are registered?
if (force && read_it && chip_to_probe) {
+ struct registered_programmer *pgm;
+ int compatible_programmers = 0;
printf("Force read (-f -r -c) requested, pretending "
"the chip is there:\n");
- startchip = probe_flash(0, &flashes[0], 1);
+ /* This loop just counts compatible controllers. */
+ for (j = 0; j < registered_programmer_count; j++) {
+ pgm = ®istered_programmers[j];
+ if (pgm->buses_supported & flashes[0].bustype)
+ compatible_programmers++;
+ }
+ if (compatible_programmers > 1)
+ printf("More than one compatible controller "
+ "found for the requested flash chip, "
+ "using the first one.\n");
+ for (j = 0; j < registered_programmer_count; j++) {
+ pgm = ®istered_programmers[j];
+ startchip = probe_flash(pgm, 0, &flashes[0], 1);
+ if (startchip != -1)
+ break;
+ }
if (startchip == -1) {
printf("Probing for flash chip '%s' failed.\n",
chip_to_probe);
@@ -471,7 +487,6 @@
"contain garbage.\n");
return read_flash_to_file(&flashes[0], filename);
}
-#endif
ret = 1;
goto out_shutdown;
} else if (!chip_to_probe) {
1
0
Hello Matthew,
thanks for your report! That mainboard was already reported:
http://www.flashrom.org/pipermail/flashrom/2011-May/006496.html
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0
flashrom v0.9.4-r1395 on Linux 3.1.9-2-ARCH (x86_64), built with libpci
3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 741M loops per
second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 989 us, 10000 myus
= 9909 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M3N78-VM"
DMI string baseboard-version: "Rev X.0x"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA MCP78S" with PCI ID 10de:075c.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to flashrom(a)flashrom.org including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet.
Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
SPI on this chipset is WIP. Please report any success or failure by mailing
us the verbose output to flashrom(a)flashrom.org, thanks!
Found SMBus device 10de:0752 at 00:01:1
MCP SPI BAR is at 0xfbf80000
Mapping NVIDIA MCP6x SPI at 0xfbf80000, unaligned size 0x544.
SPI control is 0xc01a, req=0, gnt=0
Please send the output of "flashrom -V" to flashrom(a)flashrom.org with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
This chipset supports the following protocols: SPI.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address
0xfff00000.
Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Macronix unknown Macronix SPI chip, 0 kB:
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2014
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1
0xc2, id2 0x13
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0...
0x000000-0x000fff:EW, 0x001000-0x001fff:EW, 0x002000-0x002fff:EW,
0x003000-0x003fff:EW, 0x004000-0x004fff:EW, 0x005000-0x005fff:EW,
0x006000-0x006fff:EW, 0x007000-0x007fff:EW, 0x008000-0x008fff:EW,
0x009000-0x009fff:EW, 0x00a000-0x00afff:EW, 0x00b000-0x00bfff:EW,
0x00c000-0x00cfff:EW, 0x00d000-0x00dfff:EW, 0x00e000-0x00efff:EW,
0x00f000-0x00ffff:EW, 0x010000-0x010fff:EW, 0x011000-0x011fff:EW,
0x012000-0x012fff:EW, 0x013000-0x013fff:EW, 0x014000-0x014fff:EW,
0x015000-0x015fff:EW, 0x016000-0x016fff:EW, 0x017000-0x017fff:EW,
0x018000-0x018fff:EW, 0x019000-0x019fff:EW, 0x01a000-0x01afff:EW,
0x01b000-0x01bfff:EW, 0x01c000-0x01cfff:EW, 0x01d000-0x01dfff:EW,
0x01e000-0x01efff:EW, 0x01f000-0x01ffff:EW, 0x020000-0x020fff:EW,
0x021000-0x021fff:EW, 0x022000-0x022fff:EW, 0x023000-0x023fff:EW,
0x024000-0x024fff:EW, 0x025000-0x025fff:EW, 0x026000-0x026fff:EW,
0x027000-0x027fff:EW, 0x028000-0x028fff:EW, 0x029000-0x029fff:EW,
0x02a000-0x02afff:EW, 0x02b000-0x02bfff:EW, 0x02c000-0x02cfff:EW,
0x02d000-0x02dfff:EW, 0x02e000-0x02efff:EW, 0x02f000-0x02ffff:EW,
0x030000-0x030fff:EW, 0x031000-0x031fff:EW, 0x032000-0x032fff:EW,
0x033000-0x033fff:EW, 0x034000-0x034fff:EW, 0x035000-0x035fff:EW,
0x036000-0x036fff:EW, 0x037000-0x037fff:EW, 0x038000-0x038fff:EW,
0x039000-0x039fff:EW, 0x03a000-0x03afff:EW, 0x03b000-0x03bfff:EW,
0x03c000-0x03cfff:EW, 0x03d000-0x03dfff:EW, 0x03e000-0x03efff:EW,
0x03f000-0x03ffff:EW, 0x040000-0x040fff:EW, 0x041000-0x041fff:EW,
0x042000-0x042fff:EW, 0x043000-0x043fff:EW, 0x044000-0x044fff:EW,
0x045000-0x045fff:EW, 0x046000-0x046fff:EW, 0x047000-0x047fff:EW,
0x048000-0x048fff:EW, 0x049000-0x049fff:EW, 0x04a000-0x04afff:EW,
0x04b000-0x04bfff:EW, 0x04c000-0x04cfff:EW, 0x04d000-0x04dfff:EW,
0x04e000-0x04efff:EW, 0x04f000-0x04ffff:EW, 0x050000-0x050fff:EW,
0x051000-0x051fff:EW, 0x052000-0x052fff:EW, 0x053000-0x053fff:EW,
0x054000-0x054fff:EW, 0x055000-0x055fff:EW, 0x056000-0x056fff:EW,
0x057000-0x057fff:EW, 0x058000-0x058fff:EW, 0x059000-0x059fff:EW,
0x05a000-0x05afff:EW, 0x05b000-0x05bfff:EW, 0x05c000-0x05cfff:EW,
0x05d000-0x05dfff:EW, 0x05e000-0x05efff:EW, 0x05f000-0x05ffff:EW,
0x060000-0x060fff:EW, 0x061000-0x061fff:EW, 0x062000-0x062fff:W,
0x063000-0x063fff:W, 0x064000-0x064fff:W, 0x065000-0x065fff:W,
0x066000-0x066fff:W, 0x067000-0x067fff:W, 0x068000-0x068fff:S,
0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S,
0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S,
0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S,
0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S,
0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S,
0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S,
0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S,
0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S,
0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S,
0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S,
0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S,
0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S,
0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:EW,
0x090000-0x090fff:EW, 0x091000-0x091fff:EW, 0x092000-0x092fff:EW,
0x093000-0x093fff:EW, 0x094000-0x094fff:EW, 0x095000-0x095fff:EW,
0x096000-0x096fff:EW, 0x097000-0x097fff:EW, 0x098000-0x098fff:EW,
0x099000-0x099fff:EW, 0x09a000-0x09afff:EW, 0x09b000-0x09bfff:EW,
0x09c000-0x09cfff:EW, 0x09d000-0x09dfff:EW, 0x09e000-0x09efff:EW,
0x09f000-0x09ffff:EW, 0x0a0000-0x0a0fff:EW, 0x0a1000-0x0a1fff:EW,
0x0a2000-0x0a2fff:EW, 0x0a3000-0x0a3fff:EW, 0x0a4000-0x0a4fff:EW,
0x0a5000-0x0a5fff:EW, 0x0a6000-0x0a6fff:EW, 0x0a7000-0x0a7fff:EW,
0x0a8000-0x0a8fff:EW, 0x0a9000-0x0a9fff:EW, 0x0aa000-0x0aafff:EW,
0x0ab000-0x0abfff:EW, 0x0ac000-0x0acfff:EW, 0x0ad000-0x0adfff:EW,
0x0ae000-0x0aefff:EW, 0x0af000-0x0affff:EW, 0x0b0000-0x0b0fff:EW,
0x0b1000-0x0b1fff:EW, 0x0b2000-0x0b2fff:EW, 0x0b3000-0x0b3fff:EW,
0x0b4000-0x0b4fff:EW, 0x0b5000-0x0b5fff:EW, 0x0b6000-0x0b6fff:EW,
0x0b7000-0x0b7fff:EW, 0x0b8000-0x0b8fff:EW, 0x0b9000-0x0b9fff:EW,
0x0ba000-0x0bafff:EW, 0x0bb000-0x0bbfff:EW, 0x0bc000-0x0bcfff:EW,
0x0bd000-0x0bdfff:EW, 0x0be000-0x0befff:EW, 0x0bf000-0x0bffff:EW,
0x0c0000-0x0c0fff:EW, 0x0c1000-0x0c1fff:EW, 0x0c2000-0x0c2fff:EW,
0x0c3000-0x0c3fff:EW, 0x0c4000-0x0c4fff:EW, 0x0c5000-0x0c5fff:EW,
0x0c6000-0x0c6fff:EW, 0x0c7000-0x0c7fff:EW, 0x0c8000-0x0c8fff:EW,
0x0c9000-0x0c9fff:EW, 0x0ca000-0x0cafff:EW, 0x0cb000-0x0cbfff:EW,
0x0cc000-0x0ccfff:EW, 0x0cd000-0x0cdfff:EW, 0x0ce000-0x0cefff:EW,
0x0cf000-0x0cffff:EW, 0x0d0000-0x0d0fff:EW, 0x0d1000-0x0d1fff:EW,
0x0d2000-0x0d2fff:EW, 0x0d3000-0x0d3fff:EW, 0x0d4000-0x0d4fff:EW,
0x0d5000-0x0d5fff:EW, 0x0d6000-0x0d6fff:EW, 0x0d7000-0x0d7fff:EW,
0x0d8000-0x0d8fff:EW, 0x0d9000-0x0d9fff:EW, 0x0da000-0x0dafff:EW,
0x0db000-0x0dbfff:EW, 0x0dc000-0x0dcfff:E, 0x0dd000-0x0ddfff:E,
0x0de000-0x0defff:E, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S,
0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S,
0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S,
0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S,
0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S,
0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S,
0x0f0000-0x0f0fff:EW, 0x0f1000-0x0f1fff:EW, 0x0f2000-0x0f2fff:EW,
0x0f3000-0x0f3fff:EW, 0x0f4000-0x0f4fff:EW, 0x0f5000-0x0f5fff:EW,
0x0f6000-0x0f6fff:EW, 0x0f7000-0x0f7fff:EW, 0x0f8000-0x0f8fff:EW,
0x0f9000-0x0f9fff:EW, 0x0fa000-0x0fafff:EW, 0x0fb000-0x0fbfff:EW,
0x0fc000-0x0fcfff:EW, 0x0fd000-0x0fdfff:EW, 0x0fe000-0x0fefff:EW,
0x0ff000-0x0fffff:EW
Erase/write done.
Verifying flash... VERIFIED.
1
0
Re: [flashrom] [PATCH] Workaround missing %hhx support in MinGW sscanf
by Carl-Daniel Hailfinger 16 Feb '12
by Carl-Daniel Hailfinger 16 Feb '12
16 Feb '12
Am 16.02.2012 02:30 schrieb Idwer Vollering:
> 2012/2/16 Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>:
>> > MinGW uses standard Windows C libraries and those apparently don't
>> > support %hhx for sscanf into a uint8_t. SCNx8 isn't available either.
>> >
>> > Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
> Acked-by: Idwer Vollering <vidwer(a)gmail.com>
Thanks, committed in r1495.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
1
0
Author: hailfinger
Date: Thu Feb 16 02:43:06 2012
New Revision: 1495
URL: http://flashrom.org/trac/flashrom/changeset/1495
Log:
Workaround missing %hhx support in MinGW sscanf
MinGW uses standard Windows C libraries and those apparently don't
support %hhx for sscanf into a uint8_t. SCNx8 isn't available either.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Idwer Vollering <vidwer(a)gmail.com>
Modified:
trunk/dummyflasher.c
Modified: trunk/dummyflasher.c
==============================================================================
--- trunk/dummyflasher.c Thu Feb 16 02:13:00 2012 (r1494)
+++ trunk/dummyflasher.c Thu Feb 16 02:43:06 2012 (r1495)
@@ -199,7 +199,12 @@
}
}
for (i = 0; i < spi_blacklist_size; i++) {
- sscanf(tmp + i * 2, "%2hhx", &spi_blacklist[i]);
+ unsigned int tmp2;
+ /* SCNx8 is apparently not supported by MSVC (and thus
+ * MinGW), so work around it with an extra variable
+ */
+ sscanf(tmp + i * 2, "%2x", &tmp2);
+ spi_blacklist[i] = (uint8_t)tmp2;
}
msg_pdbg("SPI blacklist is ");
for (i = 0; i < spi_blacklist_size; i++)
@@ -230,7 +235,12 @@
}
}
for (i = 0; i < spi_ignorelist_size; i++) {
- sscanf(tmp + i * 2, "%2hhx", &spi_ignorelist[i]);
+ unsigned int tmp2;
+ /* SCNx8 is apparently not supported by MSVC (and thus
+ * MinGW), so work around it with an extra variable
+ */
+ sscanf(tmp + i * 2, "%2x", &tmp2);
+ spi_ignorelist[i] = (uint8_t)tmp2;
}
msg_pdbg("SPI ignorelist is ");
for (i = 0; i < spi_ignorelist_size; i++)
1
0
16 Feb '12
MinGW uses standard Windows C libraries and those apparently don't
support %hhx for sscanf into a uint8_t. SCNx8 isn't available either.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Index: flashrom-mingw_workaround_broken_sscanf_uint8t/dummyflasher.c
===================================================================
--- flashrom-mingw_workaround_broken_sscanf_uint8t/dummyflasher.c (Revision 1492)
+++ flashrom-mingw_workaround_broken_sscanf_uint8t/dummyflasher.c (Arbeitskopie)
@@ -199,7 +199,12 @@
}
}
for (i = 0; i < spi_blacklist_size; i++) {
- sscanf(tmp + i * 2, "%2hhx", &spi_blacklist[i]);
+ unsigned int tmp2;
+ /* SCNx8 is apparently not supported by MSVC (and thus
+ * MinGW), so work around it with an extra variable
+ */
+ sscanf(tmp + i * 2, "%2x", &tmp2);
+ spi_blacklist[i] = (uint8_t)tmp2;
}
msg_pdbg("SPI blacklist is ");
for (i = 0; i < spi_blacklist_size; i++)
@@ -230,7 +235,12 @@
}
}
for (i = 0; i < spi_ignorelist_size; i++) {
- sscanf(tmp + i * 2, "%2hhx", &spi_ignorelist[i]);
+ unsigned int tmp2;
+ /* SCNx8 is apparently not supported by MSVC (and thus
+ * MinGW), so work around it with an extra variable
+ */
+ sscanf(tmp + i * 2, "%2x", &tmp2);
+ spi_ignorelist[i] = (uint8_t)tmp2;
}
msg_pdbg("SPI ignorelist is ");
for (i = 0; i < spi_ignorelist_size; i++)
--
http://www.hailfinger.org/
2
1
Re: [flashrom] [PATCH] ichspi.c: warn user and disable writes when a protected address range is detected.
by Carl-Daniel Hailfinger 16 Feb '12
by Carl-Daniel Hailfinger 16 Feb '12
16 Feb '12
Am 16.02.2012 00:58 schrieb Stefan Tauner:
> This includes not only the notorious read-only flash descriptors and locked ME
> regions, but also the more rarely used PRs (Protected Ranges).
> The user can enforce write support by specifying ich_spi_force=yes in the
> programmer options, but we don't tell him the exact syntax interactively. He
> has to read it up in the man page.
>
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
The Intel rant seems to be missing... I thought you only wanted to move it.
> diff --git a/flashrom.8 b/flashrom.8
> index e5f9a29..76aacba 100644
> --- a/flashrom.8
> +++ b/flashrom.8
> @@ -315,6 +315,21 @@ important opcodes are inaccessible due to lockdown; or if more than one flash
> chip is attached). The other options (swseq, hwseq) select the respective mode
> (if possible).
> .sp
> +ICH8 and later southbridges may also have locked address ranges of different
> +kinds if a valid descriptor was written to it. The flash address space is then
> +partitioned in multiple so called "Flash Regions" containing the host firmware,
> +the ME firmware and so on respectively. The flash descriptor can also specify up
> +to 5 so called "Protected Regions", which are freely chosen address ranges
> +independent from the aforementioned "Flash Regions". All of them can be write
> +and/or read protected individually. If flashrom detects such a lock it will
> +disable write support unless the user forces it with the
> +.sp
> +.B " flashrom \-p internal:ich_spi_force=yes"
> +.sp
> +syntax. If this leads to erase or write accesses to the flash it would most
> +probably bring it into an inconsistent and unbootable state and we will not
> +provide any support in such a case.
> +.sp
> If you have an Intel chipset with an ICH6 or later southbridge and if you want
> to set specific IDSEL values for a non-default flash chip or an embedded
> controller (EC), you can use the
> diff --git a/ichspi.c b/ichspi.c
> index 163ecf1..711f46c 100644
> --- a/ichspi.c
> +++ b/ichspi.c
> @@ -1444,11 +1445,16 @@ static void do_ich9_spi_frap(uint32_t frap, int i)
> if (base > limit) {
> /* this FREG is disabled */
> msg_pdbg("%s region is unused.\n", region_names[i]);
> - return;
> + return 0;
> }
>
> - msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff),
> + msg_pdbg("0x%08x-0x%08x is %s.\n", base, (limit | 0x0fff),
> access_names[rwperms]);
> + if (rwperms == 0x3)
> + return 0;
> +
> + msg_pinfo("WARNING: %s region is not fully accessible.\n", region_names[i]);
Odd. For FRAP, the _pinfo message just says "not fully accessible", but
for PR, the _pinfo message mentions the actual read/write protection.
Not terribly important to fix, just a small inconsistency I noticed.
> + return 1;
> }
>
> /* In contrast to FRAP and the master section of the descriptor the bits
> @@ -1460,21 +1466,25 @@ static void do_ich9_spi_frap(uint32_t frap, int i)
> #define ICH_PR_PERMS(pr) (((~((pr) >> PR_RP_OFF) & 1) << 0) | \
> ((~((pr) >> PR_WP_OFF) & 1) << 1))
>
> -static void prettyprint_ich9_reg_pr(int i)
> +/* returns 0 if range is unused (i.e. r/w) */
> +static int ich9_handle_pr(int i)
> {
> - static const char *const access_names[4] = {
> - "locked", "read-only", "write-only", "read-write"
> + static const char *const access_names[3] = {
> + "locked", "read-only", "write-only"
> };
> uint8_t off = ICH9_REG_PR0 + (i * 4);
> uint32_t pr = mmio_readl(ich_spibar + off);
> - int rwperms = ICH_PR_PERMS(pr);
> + unsigned int rwperms = ICH_PR_PERMS(pr);
>
> - msg_pdbg2("0x%02X: 0x%08x (PR%u", off, pr, i);
> - if (rwperms != 0x3)
> - msg_pdbg2(")\n0x%08x-0x%08x is %s\n", ICH_FREG_BASE(pr),
> - ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
> - else
> - msg_pdbg2(", unused)\n");
> + if (rwperms == 0x3) {
> + msg_pdbg2("0x%02X: 0x%08x (PR%u is unused)\n", off, pr, i);
> + return 0;
> + }
> +
> + msg_pdbg("0x%02X: 0x%08x ", off, pr);
> + msg_pinfo("WARNING: PR%u: 0x%08x-0x%08x is %s.\n", i, ICH_FREG_BASE(pr),
> + ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
> + return 1;
> }
>
> /* Set/Clear the read and write protection enable bits of PR register @i
> @@ -1537,6 +1547,8 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
> uint16_t spibar_offset, tmp2;
> uint32_t tmp;
> char *arg;
> + int ich_spi_force = 0;
> + int ich_spi_has_locks = 0;
Rename to ich_spi_has_region_locks or ich_spi_has_locked_regions or
somesuch. Otherwise there is possibility for confusion between
ich_spi_has_locks and ichspi_lock.
> int desc_valid = 0;
> struct ich_descriptors desc = {{ 0 }};
> enum ich_spi_mode {
> @@ -1665,17 +1693,36 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
> msg_pdbg("BRWA 0x%02x, ", ICH_BRWA(tmp));
> msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp));
>
> - /* Decode and print FREGx and FRAP registers */
> + /* Handle FREGx and FRAP registers */
> for (i = 0; i < 5; i++)
> - do_ich9_spi_frap(tmp, i);
> + ich_spi_has_locks |= ich9_handle_frap(tmp, i);
> }
>
> - /* try to disable PR locks before printing them */
> - if (!ichspi_lock)
> - for (i = 0; i < 5; i++)
> + for (i = 0; i < 5; i++) {
> + /* if not locked down try to disable PR locks first */
> + if (!ichspi_lock)
> ich9_set_pr(i, 0, 0);
> - for (i = 0; i < 5; i++)
> - prettyprint_ich9_reg_pr(i);
> + ich_spi_has_locks |= ich9_handle_pr(i);
> + }
> +
> + if (ich_spi_has_locks) {
>
Thanks for working tirelessly to get this code into an excellent shape!
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
1
Author: stefanct
Date: Thu Feb 16 02:13:00 2012
New Revision: 1494
URL: http://flashrom.org/trac/flashrom/changeset/1494
Log:
ichspi.c: warn user and disable writes when a protected address range is detected.
This includes not only the notorious read-only flash descriptors and locked ME
regions, but also the more rarely used PRs (Protected Ranges).
The user can enforce write support by specifying ich_spi_force=yes in the
programmer options, but we don't tell him the exact syntax interactively. He
has to read it up in the man page.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified:
trunk/flashrom.8
trunk/ichspi.c
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Thu Feb 16 00:40:23 2012 (r1493)
+++ trunk/flashrom.8 Thu Feb 16 02:13:00 2012 (r1494)
@@ -315,6 +315,21 @@
chip is attached). The other options (swseq, hwseq) select the respective mode
(if possible).
.sp
+ICH8 and later southbridges may also have locked address ranges of different
+kinds if a valid descriptor was written to it. The flash address space is then
+partitioned in multiple so called "Flash Regions" containing the host firmware,
+the ME firmware and so on respectively. The flash descriptor can also specify up
+to 5 so called "Protected Regions", which are freely chosen address ranges
+independent from the aforementioned "Flash Regions". All of them can be write
+and/or read protected individually. If flashrom detects such a lock it will
+disable write support unless the user forces it with the
+.sp
+.B " flashrom \-p internal:ich_spi_force=yes"
+.sp
+syntax. If this leads to erase or write accesses to the flash it would most
+probably bring it into an inconsistent and unbootable state and we will not
+provide any support in such a case.
+.sp
If you have an Intel chipset with an ICH6 or later southbridge and if you want
to set specific IDSEL values for a non-default flash chip or an embedded
controller (EC), you can use the
Modified: trunk/ichspi.c
==============================================================================
--- trunk/ichspi.c Thu Feb 16 00:40:23 2012 (r1493)
+++ trunk/ichspi.c Thu Feb 16 02:13:00 2012 (r1494)
@@ -1421,7 +1421,8 @@
#define ICH_BRWA(x) ((x >> 8) & 0xff)
#define ICH_BRRA(x) ((x >> 0) & 0xff)
-static void do_ich9_spi_frap(uint32_t frap, int i)
+/* returns 0 if region is unused or r/w */
+static int ich9_handle_frap(uint32_t frap, int i)
{
static const char *const access_names[4] = {
"locked", "read-only", "write-only", "read-write"
@@ -1436,19 +1437,26 @@
int offset = ICH9_REG_FREG0 + i * 4;
uint32_t freg = mmio_readl(ich_spibar + offset);
- msg_pdbg("0x%02X: 0x%08x (FREG%i: %s)\n",
- offset, freg, i, region_names[i]);
-
base = ICH_FREG_BASE(freg);
limit = ICH_FREG_LIMIT(freg);
if (base > limit) {
/* this FREG is disabled */
- msg_pdbg("%s region is unused.\n", region_names[i]);
- return;
+ msg_pdbg2("0x%02X: 0x%08x FREG%i: %s region is unused.\n",
+ offset, freg, i, region_names[i]);
+ return 0;
+ }
+ msg_pdbg("0x%02X: 0x%08x ", offset, freg);
+ if (rwperms == 0x3) {
+ msg_pdbg("FREG%i: %s region (0x%08x-0x%08x) is %s.\n", i,
+ region_names[i], base, (limit | 0x0fff),
+ access_names[rwperms]);
+ return 0;
}
- msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff),
- access_names[rwperms]);
+ msg_pinfo("FREG%i: WARNING: %s region (0x%08x-0x%08x) is %s.\n", i,
+ region_names[i], base, (limit | 0x0fff),
+ access_names[rwperms]);
+ return 1;
}
/* In contrast to FRAP and the master section of the descriptor the bits
@@ -1460,21 +1468,25 @@
#define ICH_PR_PERMS(pr) (((~((pr) >> PR_RP_OFF) & 1) << 0) | \
((~((pr) >> PR_WP_OFF) & 1) << 1))
-static void prettyprint_ich9_reg_pr(int i)
+/* returns 0 if range is unused (i.e. r/w) */
+static int ich9_handle_pr(int i)
{
- static const char *const access_names[4] = {
- "locked", "read-only", "write-only", "read-write"
+ static const char *const access_names[3] = {
+ "locked", "read-only", "write-only"
};
uint8_t off = ICH9_REG_PR0 + (i * 4);
uint32_t pr = mmio_readl(ich_spibar + off);
- int rwperms = ICH_PR_PERMS(pr);
+ unsigned int rwperms = ICH_PR_PERMS(pr);
- msg_pdbg2("0x%02X: 0x%08x (PR%u", off, pr, i);
- if (rwperms != 0x3)
- msg_pdbg2(")\n0x%08x-0x%08x is %s\n", ICH_FREG_BASE(pr),
- ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
- else
- msg_pdbg2(", unused)\n");
+ if (rwperms == 0x3) {
+ msg_pdbg2("0x%02X: 0x%08x (PR%u is unused)\n", off, pr, i);
+ return 0;
+ }
+
+ msg_pdbg("0x%02X: 0x%08x ", off, pr);
+ msg_pinfo("PR%u: WARNING: 0x%08x-0x%08x is %s.\n", i, ICH_FREG_BASE(pr),
+ ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
+ return 1;
}
/* Set/Clear the read and write protection enable bits of PR register @i
@@ -1537,6 +1549,8 @@
uint16_t spibar_offset, tmp2;
uint32_t tmp;
char *arg;
+ int ich_spi_force = 0;
+ int ich_spi_rw_restricted = 0;
int desc_valid = 0;
struct ich_descriptors desc = {{ 0 }};
enum ich_spi_mode {
@@ -1631,6 +1645,22 @@
}
free(arg);
+ arg = extract_programmer_param("ich_spi_force");
+ if (arg && !strcmp(arg, "yes")) {
+ ich_spi_force = 1;
+ msg_pspew("ich_spi_force enabled.\n");
+ } else if (arg && !strlen(arg)) {
+ msg_perr("Missing argument for ich_spi_force.\n");
+ free(arg);
+ return ERROR_FATAL;
+ } else if (arg) {
+ msg_perr("Unknown argument for ich_spi_force: \"%s\" "
+ "(not \"yes\").\n", arg);
+ free(arg);
+ return ERROR_FATAL;
+ }
+ free(arg);
+
tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS);
msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2);
prettyprint_ich9_reg_hsfs(tmp2);
@@ -1665,17 +1695,36 @@
msg_pdbg("BRWA 0x%02x, ", ICH_BRWA(tmp));
msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp));
- /* Decode and print FREGx and FRAP registers */
+ /* Handle FREGx and FRAP registers */
for (i = 0; i < 5; i++)
- do_ich9_spi_frap(tmp, i);
+ ich_spi_rw_restricted |= ich9_handle_frap(tmp, i);
}
- /* try to disable PR locks before printing them */
- if (!ichspi_lock)
- for (i = 0; i < 5; i++)
+ for (i = 0; i < 5; i++) {
+ /* if not locked down try to disable PR locks first */
+ if (!ichspi_lock)
ich9_set_pr(i, 0, 0);
- for (i = 0; i < 5; i++)
- prettyprint_ich9_reg_pr(i);
+ ich_spi_rw_restricted |= ich9_handle_pr(i);
+ }
+
+ if (ich_spi_rw_restricted) {
+ msg_pinfo("Please send a verbose log to "
+ "flashrom(a)flashrom.org if this board is not "
+ "listed on\n"
+ "http://flashrom.org/Supported_hardware#Supported_mainboards "
+ "yet.\n");
+ if (!ich_spi_force)
+ programmer_may_write = 0;
+ msg_pinfo("Writes have been disabled. You can enforce "
+ "write support with the\nich_spi_force "
+ "programmer option, but it will most likely "
+ "harm your hardware!\nIf you force flashrom "
+ "you will get no support if something "
+ "breaks.\n");
+ if (ich_spi_force)
+ msg_pinfo("Continuing with write support "
+ "because the user forced us to!\n");
+ }
tmp = mmio_readl(ich_spibar + ICH9_REG_SSFS);
msg_pdbg("0x90: 0x%02x (SSFS)\n", tmp & 0xff);
1
0
Re: [flashrom] [PATCH] ichspi.c: warn user and disable writes when a protected address range is detected.
by Carl-Daniel Hailfinger 16 Feb '12
by Carl-Daniel Hailfinger 16 Feb '12
16 Feb '12
Am 14.02.2012 16:39 schrieb Stefan Tauner:
> This includes not only the notorious read-only flash descriptors and locked ME
> regions, but also the more rarely used PRs (Protected Ranges).
> The user can enforce write support by specifying ich_spi_force=yes in the
Can you rename ich_spi_force to ich_ignore_locks or something similar?
The PR stuff is not limited to SPI IIRC.
> programmer options, but we don't tell him the exact syntax interactively. He
> has to read it up in the man page.
> ---
> non-verbose sample output from my laptop (that contains both protection types):
> […]
> Found chipset "Intel QS57". Enabling flash write... WARNING: SPI Configuration Lockdown activated.
> WARNING: Flash Descriptor region is not fully accessible and flashrom can
> not deal with this correctly yet.
> Intel does not provide us the necessary documention to support this.
> Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on
> http://flashrom.org/Supported_hardware#Supported_mainboards yet.
> Writes have been disabled. You can enforce write support with the
> ich_spi_force programmer option, but it will most likely harm your hardware!
> If you force flashrom you will get no support if something breaks.
> WARNING: Management Engine region is not fully accessible and flashrom can
> not deal with this correctly yet.
> WARNING: PR0: 0x007d0000-0x01ffffff is read-only.
> OK.
> […]
Ugh. This is the non-verbose version? I had trouble parsing that message
flood on the first attempt. May I suggest an alternative wording?
WARNING: Flash Descriptor region is not fully accessible.
WARNING: Management Engine region is not fully accessible.
WARNING: PR0: 0x007d0000-0x01ffffff is read-only.
Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on
http://flashrom.org/Supported_hardware#Supported_mainboards yet.
Writes have been disabled. You can force writing with the ich_ignore_locks
programmer option, but it will most likely brick your mainboard.
The idea of my wording is to postpone the explanatory message until all
"not accessible"/"read-only" messages have been printed.
The complaint about Intel belongs to the man page or to intel_mysteries.txt
(if you choose the latter, just mention intel_mysteries.txt at the relevant
location in the man page).
For the override case, just print the message above and additionally
"You have been warned. We will not support you if write/erase bricks your
mainboard. Proceeding anyway because user specified ich_ignore_locks."
or something similar.
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
> ---
> flashrom.8 | 15 ++++++++++
> ichspi.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++------------
> 2 files changed, 86 insertions(+), 19 deletions(-)
>
> diff --git a/flashrom.8 b/flashrom.8
> index 2f23cb8..0ca4fdb 100644
> --- a/flashrom.8
> +++ b/flashrom.8
> @@ -315,6 +315,21 @@ important opcodes are inaccessible due to lockdown; or if more than one flash
> chip is attached). The other options (swseq, hwseq) select the respective mode
> (if possible).
> .sp
> +ICH8 and later southbridges may also have locked address ranges of different
> +kinds if a valid descriptor was written to it. The flash address space is then
> +partitioned in multiple so called "Flash Regions" containing the host firmware,
> +the ME firmware and so on respectively. The flash descriptor can also specify up
> +to 5 so called "Protected Regions", which are freely chosen address ranges
> +independent from the aforementioned "Flash Regions". All of them can be write
> +and/or read protected individually. If flashrom detects such a lock it will
> +disable write support unless the user forces it with the
> +.sp
> +.B " flashrom \-p internal:ich_spi_force=yes"
> +.sp
> +syntax. If this leads to erase or write accesses to the flash it would most
> +probably bring it into an inconsistent and unbootable state and we will not
> +provide any support in such a case.
> +.sp
> If you have an Intel chipset with an ICH6 or later southbridge and if you want
> to set specific IDSEL values for a non-default flash chip or an embedded
> controller (EC), you can use the
> diff --git a/ichspi.c b/ichspi.c
> index 163ecf1..f21bb35 100644
> --- a/ichspi.c
> +++ b/ichspi.c
> @@ -1416,12 +1416,36 @@ static int ich_spi_send_multicommand(struct flashctx *flash,
> return ret;
> }
>
> +static void ich9_disable_writes(int force, const char * const msg)
> +{
> + /* Don't scare and spam the user even more if write support was already
> + * disabled */
> + if (!programmer_may_write)
> + return;
> +
> + msg_pinfo("%s", msg);
> + msg_pinfo("Please send a verbose log to flashrom(a)flashrom.org if this "
> + "board is not listed on\n"
> + "http://flashrom.org/Supported_hardware#Supported_mainboards "
> + "yet.\n");
> + if (!force) {
> + programmer_may_write = 0;
> + msg_pinfo("Writes have been disabled. You can enforce write "
> + "support with the\nich_spi_force programmer option, "
> + "but it will most likely harm your hardware!\n");
> + }
> + msg_pinfo("If you force flashrom you will get no support if something "
> + "breaks.\n");
> + if (force)
> + msg_pinfo("Continuing anyway because the user forced us to!\n");
> +}
> +
> #define ICH_BMWAG(x) ((x >> 24) & 0xff)
> #define ICH_BMRAG(x) ((x >> 16) & 0xff)
> #define ICH_BRWA(x) ((x >> 8) & 0xff)
> #define ICH_BRRA(x) ((x >> 0) & 0xff)
>
> -static void do_ich9_spi_frap(uint32_t frap, int i)
> +static void ich9_handle_frap(uint32_t frap, int i, int force)
> {
> static const char *const access_names[4] = {
> "locked", "read-only", "write-only", "read-write"
> @@ -1447,8 +1471,15 @@ static void do_ich9_spi_frap(uint32_t frap, int i)
> return;
> }
>
> - msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff),
> + msg_pdbg("0x%08x-0x%08x is %s.\n", base, (limit | 0x0fff),
> access_names[rwperms]);
> + if (rwperms == 0x3)
> + return;
> +
> + msg_pinfo("WARNING: %s region is not fully accessible and flashrom "
> + "can\nnot deal with this correctly yet.\n", region_names[i]);
> + ich9_disable_writes(force, "Intel does not provide us the necessary "
> + "documention to support this.\n");
> }
>
> /* In contrast to FRAP and the master section of the descriptor the bits
> @@ -1460,21 +1491,25 @@ static void do_ich9_spi_frap(uint32_t frap, int i)
> #define ICH_PR_PERMS(pr) (((~((pr) >> PR_RP_OFF) & 1) << 0) | \
> ((~((pr) >> PR_WP_OFF) & 1) << 1))
>
> -static void prettyprint_ich9_reg_pr(int i)
> +static void ich9_handle_pr(int i, int force)
> {
> - static const char *const access_names[4] = {
> - "locked", "read-only", "write-only", "read-write"
> + static const char *const access_names[3] = {
> + "locked", "read-only", "write-only"
> };
> uint8_t off = ICH9_REG_PR0 + (i * 4);
> uint32_t pr = mmio_readl(ich_spibar + off);
> - int rwperms = ICH_PR_PERMS(pr);
> + unsigned int rwperms = ICH_PR_PERMS(pr);
>
> - msg_pdbg2("0x%02X: 0x%08x (PR%u", off, pr, i);
> - if (rwperms != 0x3)
> - msg_pdbg2(")\n0x%08x-0x%08x is %s\n", ICH_FREG_BASE(pr),
> - ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
> - else
> - msg_pdbg2(", unused)\n");
> + if (rwperms >= 0x3) {
Why >= 0x3? AFAICS the ICH_PR_PERMS macro can only have values between
0x0 and 0x3.
> + msg_pdbg2("0x%02X: 0x%08x (PR%u is unused)\n", off, pr, i);
> + return;
> + }
> +
> + msg_pdbg("0x%02X: 0x%08x ", off, pr);
> + msg_pinfo("WARNING: PR%u: 0x%08x-0x%08x is %s.\n", i, ICH_FREG_BASE(pr),
> + ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]);
> + ich9_disable_writes(force, "There is no way to change this from within "
> + "the system.\n");
> }
>
> /* Set/Clear the read and write protection enable bits of PR register @i
> @@ -1537,6 +1572,7 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
> uint16_t spibar_offset, tmp2;
> uint32_t tmp;
> char *arg;
> + int ich_spi_force = 0;
> int desc_valid = 0;
> struct ich_descriptors desc = {{ 0 }};
> enum ich_spi_mode {
> @@ -1631,6 +1667,22 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
> }
> free(arg);
>
> + arg = extract_programmer_param("ich_spi_force");
> + if (arg && !strcmp(arg, "yes")) {
> + ich_spi_force = 1;
> + msg_pspew("ich_spi_force enabled.\n");
> + } else if (arg && !strlen(arg)) {
> + msg_perr("Missing argument for ich_spi_force.\n");
> + free(arg);
> + return ERROR_FATAL;
> + } else if (arg) {
> + msg_perr("Unknown argument for ich_spi_force: \"%s\" "
> + "(not \"yes\").\n", arg);
> + free(arg);
> + return ERROR_FATAL;
> + }
> + free(arg);
> +
> tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS);
> msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2);
> prettyprint_ich9_reg_hsfs(tmp2);
> @@ -1665,17 +1717,17 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
> msg_pdbg("BRWA 0x%02x, ", ICH_BRWA(tmp));
> msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp));
>
> - /* Decode and print FREGx and FRAP registers */
> + /* Handle FREGx and FRAP registers */
> for (i = 0; i < 5; i++)
> - do_ich9_spi_frap(tmp, i);
> + ich9_handle_frap(tmp, i, ich_spi_force);
> }
>
> - /* try to disable PR locks before printing them */
> - if (!ichspi_lock)
> - for (i = 0; i < 5; i++)
> + for (i = 0; i < 5; i++) {
> + /* if not locked down try to disable PR locks first */
> + if (!ichspi_lock)
> ich9_set_pr(i, 0, 0);
> - for (i = 0; i < 5; i++)
> - prettyprint_ich9_reg_pr(i);
> + ich9_handle_pr(i, ich_spi_force);
> + }
>
> tmp = mmio_readl(ich_spibar + ICH9_REG_SSFS);
> msg_pdbg("0x90: 0x%02x (SSFS)\n", tmp & 0xff);
Looks good otherwise.
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
3
Re: [flashrom] [PATCH] Warn of one-time programmable (OTP) memory
by Carl-Daniel Hailfinger 16 Feb '12
by Carl-Daniel Hailfinger 16 Feb '12
16 Feb '12
Hi Stefan,
I have waited very long to comment on this patch, but I simply don't
have a good answer for it.
I do think that OTP/security memory is outside the scope of flashrom
because it behaves totally different (and testing could easily kill a
dozen chips during inital implementation, and a few chips each time
someone wants to retest). Now if something is outside the scope of
flashrom, should flashrom care at all? Some flash chips have GPI pins
(GPIO without output) and those are readable with commands very similar
to those used by flashrom. Should we tell the user about that feature as
well? We had such requests in the past, and I was not really happy about
them.
Am 14.08.2011 05:36 schrieb Stefan Tauner:
> Some flash chips contain OTP memory that we cannot read or write (yet). This
> prohibits us from cloning them, hence warn the user if we detect it. Not all
> variations of the tagged chips contain OTP memory. They are often only
> enabled on request or have there own ordering numbers. There is usually no
> way to distinguish them afaict.
Well, it's worse than that. I've seen datasheets for flash chips with
the following features:
- OTP memory, fully readable, fully writable once in one block (no
partial writes)
- OTP memory, fully readable, fully writable once per byte (partial
writes work just fine)
- OTP memory, fully readable, fully writable once per 2^n-byte block
- OTP memory, fully readable, only half of it writable, the other half
is programmed at the factory
- OTP memory, fully readable, completely pre-written at the factory (so
it's rather ROM than OTP)
- Hidden OTP memory which can only be read if you know the correct
security ID which is part of the OTP
- (The complete flash chip behaves like OTP (well, like ROM) once a
specific write-once status register is set)... not relevant here
And then you have the problem that multiple chip generations often share
the same device ID, so probing can't differentiate between a chip with
OTP and one without unless you're extremely lucky. Do we want
FEATURE_OTP and FEATURE_MAYBE_OTP?
Do we warn if a chip has a readonly serial number? That means the chip
can't be cloned. People who care about OTP for clonability reasons
probably care about other readonly contents as well. OTOH, other people
who don't use the OTP at all (for them, OTP is just an accidental
feature of a cheap flash chip) don't want to be bothered by yet another
line of output from flashrom which has no relevancy for them.
> The manpage is extended to describe the backgrounds a bit. While i touched
> that section, i also reformatted it a bit and removed the reference to the trac
> bug reporting facility.
>
> This patch is based on the idea and code of Daniel Lenski.
> ---
> the reason i removed the trac reference is that it is not used, i have no (working)
> login and it does not really fits our work flow anyway. the only user that used it
> in my active flashrom time ranted about it. would anyone miss it?
To be honest, trac is something I never got along with. Even if I'm
logged in there is no way for me to read the email address of the person
who opened the bug, so communication is pretty difficult. I'm all for
checking all old trac tickets, closing what can be closed, and moving
all other tickets in some way or another to the mailing list. However,
we should mention that it's OK to report bugs via IRC as well as long as
the reporter mentions a way to contact hi/her (i.e. email address).
Removing the trac reference and adding the IRC reference should be a
separate patch, though, which is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
One comment about the man page formatting: This part of the patch may
conflict with the other man page formatting patch you sent. By the way,
do you know any good reference about man page formatting? I had trouble
finding out what .RE and .RS do.
> the new default verbosity output is:
> This chip may contain one-time programmable memory (see man page for details).
>
> the new dbg1/-V output is:
> This chip may contain one-time programmable memory.
> flashrom cannot read, and may never be able to write it. flashrom may not be
> able to completely clone the contents of this chip (see man page for details).
>
> there are certainly more chips with OTP memories out there. additions are
> welcome!
> i have only tagged chips with user modifiably OTP/security memories. there
> are some chips out there which have factory written IDs, but no OTP memory.
> a similar warning could/should be printed for those, but i did not want to
> abuse the OTP tag for this. also, there is nothing we can do, but read those IDs.
> duplicating chips using them is not possible, so a warning in the man page might
> suffice?
>
> since OTP memory (or any other data outside the linear address range of the
> "main" memory) can not be handled very well in flashrom right now, it is not
> clear how OTP memory access could be developed further. of course one could
> start to implement the basic methods needed to read them, but how they
> should be integrated then is not clear.
> one could start by adding an otp_print field to the struct flashchip and just
> dump the bytes on probing similar to the lock printing (not on default verbosity
> and possibly only if there are bytes different from 0x00 and 0xff).
>
> carl-daniel seems to be quite sceptical regarding handling OTP at all in flashrom.
> he stated "it does not really fit our device model at all", which is right, but could
> be changed.
> he also asked "should we really handle all features present in flash chips?"
> and the answer is probably "no", although i don't see a reason why we should
> not, if the effort is not too much and the architectural changes needed aren't
> obvious NOGOs.
> but OTP regions are somewhat special, they are not just *some* feature.
Indeed.
> one argument is the one stated in the message printed by this patch. flashrom
> is not able to clone chips that have some kind of OTP memory written right now.
> imo "cloning" a flash chip seems to be a valid use case for a tool like flashrom as
> long as it is feasible (which is not for chips with unique, preconfigured IDs).
>
> the other more theoretical argument i have is: OTP memory is just some
> memory in the flash chip. it may need other access patterns, but it is not much
> different from other write protected memories apart from that.
> some chips implement it in a way that it is even possible to erase the OTP
> regions. those regions are just normal flash and are made unwriteable by fuses
> in a register or another addressable byte.
>
> Signed-off-by: Daniel Lenski <dlenski(a)gmail.com>
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Stefan: I don't want to veto this patch, and although I think that OTP
handling is not really a flashrom feature, I think that this
implementation satisfies the quality criteria for merging, so the patch is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
3
Author: stefanct
Date: Thu Feb 16 00:40:23 2012
New Revision: 1493
URL: http://flashrom.org/trac/flashrom/changeset/1493
Log:
Warn of one-time programmable (OTP) memory
Some flash chips contain OTP memory that we cannot read or write (yet). This
prohibits us from cloning them, hence warn the user if we detect it. Not all
variations of the tagged chips contain OTP memory. They are often only
enabled on request or have there own ordering numbers. There is usually no
way to distinguish them. Because this is a supposedly seldomly used feature
the warning is shown in with dbg verbosity.
The manpage is extended to describe the backgrounds a bit.
This patch is based on the idea and code of Daniel Lenski.
Signed-off-by: Daniel Lenski <dlenski(a)gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified:
trunk/flash.h
trunk/flashchips.c
trunk/flashrom.8
trunk/flashrom.c
Modified: trunk/flash.h
==============================================================================
--- trunk/flash.h Mon Feb 13 01:35:35 2012 (r1492)
+++ trunk/flash.h Thu Feb 16 00:40:23 2012 (r1493)
@@ -83,6 +83,7 @@
#define FEATURE_ADDR_SHIFTED (1 << 5)
#define FEATURE_WRSR_EWSR (1 << 6)
#define FEATURE_WRSR_WREN (1 << 7)
+#define FEATURE_OTP (1 << 8)
#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN)
struct flashctx;
Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c Mon Feb 13 01:35:35 2012 (r1492)
+++ trunk/flashchips.c Thu Feb 16 00:40:23 2012 (r1493)
@@ -1120,7 +1120,8 @@
.model_id = AMIC_A25L032,
.total_size = 4096,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -1158,7 +1159,8 @@
.model_id = AMIC_A25LQ032,
.total_size = 4096,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -1315,7 +1317,8 @@
.model_id = ATMEL_AT25DF021,
.total_size = 256,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -1543,7 +1546,8 @@
.model_id = ATMEL_AT25DF321A,
.total_size = 4096,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -1619,7 +1623,8 @@
.model_id = ATMEL_AT25DQ161,
.total_size = 2048,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -1657,7 +1662,8 @@
.model_id = ATMEL_AT25F512B,
.total_size = 64,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -2168,6 +2174,8 @@
.model_id = ATMEL_AT45DB321D,
.total_size = 4096 /* Size can only be determined from status register */,
.page_size = 512 /* Size can only be determined from status register */,
+ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
+ .feature_bits = FEATURE_OTP,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3236,8 +3244,8 @@
.model_id = EON_EN25Q40,
.total_size = 512,
.page_size = 256,
- /* TODO: chip features 256-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 256B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3271,8 +3279,8 @@
.model_id = EON_EN25Q80,
.total_size = 1024,
.page_size = 256,
- /* TODO: chip features 256-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 256B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3308,9 +3316,8 @@
.model_id = EON_EN25Q16,
.total_size = 2048,
.page_size = 256,
- /* TODO: EN25D16 features 512-byte one-time programmable region,
- * EN25Q16 features a 128-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: D16 512B/Q16 128B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3348,8 +3355,8 @@
.model_id = EON_EN25Q32,
.total_size = 4096,
.page_size = 256,
- /* TODO: chip features 512-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 512B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3383,8 +3390,8 @@
.model_id = EON_EN25Q64,
.total_size = 8192,
.page_size = 256,
- /* TODO: chip features 512-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 512B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3418,8 +3425,8 @@
.model_id = EON_EN25Q128,
.total_size = 16384,
.page_size = 256,
- /* TODO: chip features 512-byte one-time programmable region */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 512B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -3452,10 +3459,9 @@
.model_id = EON_EN25QH16,
.total_size = 2048,
.page_size = 256,
- /* TODO: chip features 512-byte one-time programmable region
- * and supports SFDP.
- */
- .feature_bits = FEATURE_WRSR_WREN,
+ /* supports SFDP */
+ /* OTP: 512B total; enter 0x3A */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7092,6 +7098,8 @@
.model_id = ST_M25PX16,
.total_size = 2048,
.page_size = 256,
+ /* OTP: 64B total; read 0x4B; write 0x42 */
+ .feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7960,7 +7968,8 @@
.model_id = WINBOND_NEX_W25Q80,
.total_size = 1024,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7997,7 +8006,8 @@
.model_id = WINBOND_NEX_W25Q16,
.total_size = 2048,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -8034,7 +8044,8 @@
.model_id = WINBOND_NEX_W25Q32,
.total_size = 4096,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -8071,7 +8082,8 @@
.model_id = WINBOND_NEX_W25Q64,
.total_size = 8192,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -8107,7 +8119,8 @@
.model_id = WINBOND_NEX_W25Q128,
.total_size = 16384,
.page_size = 256,
- .feature_bits = FEATURE_WRSR_WREN,
+ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8 Mon Feb 13 01:35:35 2012 (r1492)
+++ trunk/flashrom.8 Thu Feb 16 00:40:23 2012 (r1493)
@@ -670,6 +670,19 @@
More information about flashrom on laptops is available from
.sp
.B " http://www.flashrom.org/Laptops"
+.SS
+One-time programmable (OTP) memory and unique IDs
+.sp
+Some flash chips contain OTP memory often denoted as "security registers".
+They usually have a capacity in the range of some bytes to a few hundred
+bytes and can be used to give devices unique IDs etc. flashrom is not able
+to read or write these memories and may therefore not be able to duplicate a
+chip completely. For chip types known to include OTP memories a warning is
+printed when they are detected.
+.sp
+Similar to OTP memories are unique, factory programmed, unforgeable IDs.
+They are not modifiable by the user at all.
+.RE
.SH LICENSE
.B flashrom
is covered by the GNU General Public License (GPL), version 2. Some files are
Modified: trunk/flashrom.c
==============================================================================
--- trunk/flashrom.c Mon Feb 13 01:35:35 2012 (r1492)
+++ trunk/flashrom.c Thu Feb 16 00:40:23 2012 (r1493)
@@ -1560,6 +1560,13 @@
void check_chip_supported(const struct flashctx *flash)
{
+ if (flash->feature_bits & FEATURE_OTP) {
+ msg_cdbg("This chip may contain one-time programmable memory. "
+ "flashrom cannot read\nand may never be able to write "
+ "it, hence it may not be able to completely\n"
+ "clone the contents of this chip (see man page for "
+ "details).\n");
+ }
if (TEST_OK_MASK != (flash->tested & TEST_OK_MASK)) {
msg_cinfo("===\n");
if (flash->tested & TEST_BAD_MASK) {
1
0
Hello Stefan.
Thanks for your reply. Much appreciated.
As requested, please find below the output of actual writing of the
BIOS and below that the output of "flashrom -V".
The link to the mainboard:
http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/
The link to the mainboard manual:
http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5K-V/e3269_p5k-v_manual.zip
I don't know the exact revision of the board. The board was purchased
in Oct 2007.
Kind regards.
John-Paul Vanderjagt
(Wellington, New Zealand)
--
> On Wed, 15 Feb 2012 20:40:10 +1300
> John-Paul Vanderjagt <flashrom(a)vanderjagt.co.nz> wrote:
>
> > Dear maintainers at flashrom(a)flashrom.org.
> >
> > FYI, I'd like to report a successful BIOS flash on an Asus P5K-V
> > main board. See relevant info below. You may update your list
> > http://flashrom.org/Supported_hardware with this info. Thanks for
> > producing flashrom.
> > […]
>
> Hello John-Paul,
>
> thanks for your report!
> I have marked the mainboard as supported and will commit that later
> together with other small changes.
> Your report contains quite some information we actually don't care much
> about. More important than anything else is the (verbose/-V) output of
> the actual write operation of flashrom (or if that is no longer
> available just the verbose output of a probe (i.e. just flashrom -V).
> Apart from that a link to the vendor website is handy and the exact
> revision of the board if applicable might be of interest sometimes. I
> write this because you seem to have invested quite some time on your
> report (which i really appreciate).
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
--
# flashrom -w P5K-V-1002.ROM
flashrom v0.9.3-r1246 on Linux 2.6.37.6-0.11-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
No coreboot table found.
Found chipset "Intel ICH9", enabling flash write... OK.
This chipset supports the following protocols: FWH,SPI.
Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom(a)flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling checks.
Erasing and writing flash chip... Done.
Verifying flash... VERIFIED.
#
--
# flashrom -V
flashrom v0.9.3-r1246 on Linux 2.6.37.6-0.11-default (i686), built with libpci 3.1.7, GCC 4.5.1 20101208 [gcc-4_5-branch revision 167585], little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 3000M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1004 us, 10000 myus = 10001 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "P5K-V"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5K-V"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH9", enabling flash write... chipset PCI ID is 8086:2918,
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
Root Complex Register Block address = 0xfed1c000
GCS = 0x1464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x02, BRRA 0x02
0x54: 0x00001fff (FREG0: Flash Descriptor)
Flash Descriptor region is unused.
0x58: 0x00001fff (FREG1: BIOS)
BIOS region is unused.
0x5C: 0x00001fff (FREG2: Management Engine)
Management Engine region is unused.
0x60: 0x00001fff (FREG3: Gigabit Ethernet)
Gigabit Ethernet region is unused.
0x64: 0x00001fff (FREG4: Platform Data)
Platform Data region is unused.
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00420000 (SSFS, SSFC)
0x94: 0x0000 (PREOP)
0x96: 0x543b (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0x0006019f (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for Bright BM29F040, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon EN29F010, 128 KB: skipped.
Probing for Eon EN29F002(A)(N)B, 256 KB: skipped.
Probing for Eon EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Hyundai HY29F040A, 512 KB: skipped.
Probing for Intel 28F001BN/BX-B, 128 KB: skipped.
Probing for Intel 28F001BN/BX-T, 128 KB: skipped.
Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped.
Probing for Intel 28F008S3/S5/SC, 512 KB: skipped.
Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped.
Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped.
Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped.
Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29F040, 512 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for MoselVitelic V29C51000B, 64 KB: skipped.
Probing for MoselVitelic V29C51000T, 64 KB: skipped.
Probing for MoselVitelic V29C51400B, 512 KB: skipped.
Probing for MoselVitelic V29C51400T, 512 KB: skipped.
Probing for MoselVitelic V29LC51000, 64 KB: skipped.
Probing for MoselVitelic V29LC51001, 128 KB: skipped.
Probing for MoselVitelic V29LC51002, 256 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0x5e, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST25VF010.REMS, 128 KB: probe_spi_rems: id1 0xef, id2 0x13
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST25LF040A.RES, 512 KB:
program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0x5e, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x7c, id2 0xc1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BB, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0x5e, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Chip status register is 00
Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped.
Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped.
Probing for Winbond W29C040/P, 512 KB: skipped.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U/N, 256 KB: skipped.
Probing for Winbond W49F020, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0x5e, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x13
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom(a)flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0xdc
#
--
1
0
Op 15-2-2012 16:23, Stefan Tauner schreef:
> Also, rephrase the documention related to laptops completely to make it
> less redundant and more informative.
> Document the laptop=this_is_not_a_laptop internal programmer parameter
Whatever happened to flashrom's semi-dependency on DMIDECODE?
I thought flashrom implemented its own dmi-calls since 0.9.4, but trying
Idwer's DOS-port (rev1452) and not having DMIDECOD.EXE (yep, 8.3 naming,
sorry) all I end up with in VMware/FreeDOS is a "hey can't identify
anything, so this must be a laptop..if not, please override".
Overriding still produces the same 'please override' output followed by
a message that you're overriding, and continues. Ofcourse no single
emulation platform seems to have a flashrom anyway, so stuff happily aborts.
I guess flashrom could at least continue to try reading without needing
an override. Erasing and writing ofcourse do require overrides if
anything is uncertain in advance.
2
1
Hello!
As requested in the flashrom -V output, here is what I get running the command on a M3N-HT Deluxe MoBo.
If you need anything else, don't hesitate contacting me.
Regards.
flashrom v0.9.2-r1028 on Linux 2.6.35-32-generic (x86_64), built with libpci 3.0.0, GCC 4.4.4, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1507M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus = 10003 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "M3N-HT DELUXE"
DMI string baseboard-version: "1.XX"
DMI string chassis-type: "Desktop"
Found ITE Super I/O, id 8716
Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is 10de:07
5d, This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Guessed flash bus type is SPI
Found SMBus device 10de:0752 at 00:01:1
SPI BAR is at 0xfdf80000, after clearing low bits BAR is at 0xfdf80000
SPI control is 0xc01a, enable=0, idle=0
Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks.
SPI on this chipset is not supported yet.
OK.
This chipset supports the following protocols: None.
No IT87* serial flash segment enabled.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: skipped.
Probing for Intel 82802AC, 1024 KB: skipped.
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: skipped.
Probing for PMC Pm49FL004, 512 KB: skipped.
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: skipped.
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: skipped.
Probing for SST SST49LF003A/B, 384 KB: skipped.
Probing for SST SST49LF004A/B, 512 KB: skipped.
Probing for SST SST49LF004C, 512 KB: skipped.
Probing for SST SST49LF008A, 1024 KB: skipped.
Probing for SST SST49LF008C, 1024 KB: skipped.
Probing for SST SST49LF016C, 2048 KB: skipped.
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: skipped.
Probing for ST M50FLW040B, 512 KB: skipped.
Probing for ST M50FLW080A, 1024 KB: skipped.
Probing for ST M50FLW080B, 1024 KB: skipped.
Probing for ST M50FW002, 256 KB: skipped.
Probing for ST M50FW016, 2048 KB: skipped.
Probing for ST M50FW040, 512 KB: skipped.
Probing for ST M50FW080, 1024 KB: skipped.
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: skipped.
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: skipped.
Probing for Winbond W39V080FA, 1024 KB: skipped.
Probing for Winbond W39V080FA (dual mode), 512 KB: skipped.
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
2
1
Dear maintainers at flashrom(a)flashrom.org.
FYI, I'd like to report a successful BIOS flash on an Asus P5K-V
main board. See relevant info below. You may update your list
http://flashrom.org/Supported_hardware with this info. Thanks for
producing flashrom.
Kind regards.
John-Paul Vanderjagt.
Wellington, New Zealand.
<flashrom at vanderjagt dot co dot nz>
--
Manual of main board:
http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5K-V/e3269_p5k-v_manual.zip
% rpm -qa flashrom
flashrom-0.9.3_r1246-3.1.i586
% uname -a
Linux server 2.6.37.6-0.11-default #1 SMP 2011-12-19 23:39:38 +0100 i686 i686 i386 GNU/Linux
% cat /etc/SuSE-release
openSUSE 11.4 (i586)
VERSION = 11.4
CODENAME = Celadon
% cat dmidecode.out_after_bios_upgrade
# dmidecode 2.11
SMBIOS 2.4 present.
70 structures occupying 2500 bytes.
Table at 0x000F06F0.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 1002
Release Date: 06/18/2008
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
[...]
BIOS Revision: 8.12
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: System manufacturer
Product Name: P5K-V
Version: System Version
Serial Number: System Serial Number
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: P5K-V
Version: Rev 1.xx
Serial Number: MB-1234567890
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
[...]
% diff dmidecode.out_after_bios_upgrade dmidecode.out_before_bios_upgrade
3,4c3,4
< 70 structures occupying 2500 bytes.
< Table at 0x000F06F0.
---
> 70 structures occupying 2492 bytes.
> Table at 0x000F06E0.
9,10c9,10
< Version: 1002
< Release Date: 06/18/2008
---
> Version: 0212
> Release Date: 05/24/2007
48c48
< UUID: 00020003-0004-0005-0006-000700080009
---
> UUID: A095EBCD-CBFE-D511-B2E2-001BFC90E48F
58c58
< Serial Number: MB-1234567890
---
> Serial Number: MS1C75B79Y01238
80c80
< OEM Information: 0x00000004
---
> OEM Information: 0x00000001
590c590
< String 1: To Be Filled By O.E.M.
---
> String 1: 001BFC90E48F
[...]
--
2
1
15 Feb '12
On Wed, 15 Feb 2012 12:20:56 -0200
Sergio Cipolla <secipolla(a)gmail.com> wrote:
> OK. Thank you all again. Everything is fine with the new BIOS.
> So maybe just the chip info should be updated to support write?
> Just to make sure again, my mobo is K7VTA3/KT333:3.1 (3.1 being the
> PCB version).
hello sergio and thanks for your report.
The mainboard as well as the chip status have already been updated in
the past (might not show up yet on the website though).
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0