- flashrom - mail.coreboot.org

[PATCH 1/7] Introduce and use enum test_state
by Stefan Tauner 03 Mar '12

03 Mar '12

Previously boards in the wiki were tagged either as working or as known bad. But we added support to various boards via board enables that were then never tested because the owners have not reported back. This can now be tagged with NT and is shown appropriately. Also, the underlying data structure indicating state was converted from macros to an enum while preserving original integer values. Because all lines specifying supported boards and laptops were touched anyway, this patch also re-indents them. --- TODO: change other occurrences to use it. wanted to get feedack first. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flash.h | 7 +- print.c | 869 +++++++++++++++++++++++++++++----------------------------- print_wiki.c | 7 +- programmer.h | 6 +- 4 files changed, 446 insertions(+), 443 deletions(-) diff --git a/flash.h b/flash.h index 0dac13d..4d0d79b 100644 --- a/flash.h +++ b/flash.h @@ -251,8 +251,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, i int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename); int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename); -#define OK 0 -#define NT 1 /* Not tested */ +enum test_state { + OK = 0, + NT = 1, /* Not tested */ + BAD +}; /* Something happened that shouldn't happen, but we can go on. */ #define ERROR_NONFATAL 0x100 diff --git a/print.c b/print.c index 1fdeac7..544a846 100644 --- a/print.c +++ b/print.c @@ -545,428 +545,427 @@ void print_supported(void) /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) - B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), - B("abit", "A-S78H", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "AV8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "BM6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "Fatal1ty F-I90HD", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "IC7", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "IP35", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), - B("abit", "IP35 Pro", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), - B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."), - B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), - B("abit", "NF-M2S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), - B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), - B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), - B("Acorp", "6A815EPD", 1, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), - B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), - B("agami", "Aruma", 1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), - B("Albatron", "PM266A Pro", 1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ - B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."), - B("AOpen", "vKM400Am-S", 1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL), - B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL), - B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL), - B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), - B("ASRock", "775i65G", 1, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL), - B("ASRock", "890GX Extreme3", 1, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL), - B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL), - B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), - B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), - B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), - B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), - B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), - B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), - B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), - B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), - B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), - B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), - B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), - B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), - B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), - B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), - B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), - B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), - B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), - B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), - B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), - B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), - B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), - B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), - B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), - B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), - B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), - B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), - B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."), - B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), - B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), - B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), - B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), - B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), - B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), - B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), - B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), - B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), - B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), - B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), - B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), - B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), - B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), - B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), - B("ASUS", "KFSN4-DRE/SAS", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL), - B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), - B("ASUS", "M2A-VM (HDMI)", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL), - B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), - B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), - B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), - B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), - B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), - B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), - B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), - B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), - B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), - B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), - B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), - B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), - B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), - B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), - B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), - B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), - B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), - B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), - B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), - B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), - B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), - B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."), - B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), - B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), - B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL), - B("ASUS", "P2B-F", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), - B("ASUS", "P2B-N", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL), - B("ASUS", "P2E-M", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL), - B("ASUS", "P2L97-S", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL), - B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), - B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), - B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), - B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), - B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), - B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), - B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), - B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), - B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), - B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), - B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), - B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), - B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), - B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), - B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), - B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), - B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), - B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), - B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."), - B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), - B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), - B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), - B("ASUS", "P5K-V", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL), - B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), - B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), - B("ASUS", "P5KPL-CM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL), - B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), - B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), - B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), - B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), - B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), - B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), - B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), - B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), - B("ASUS", "P5N7A-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL), - B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), - B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), - B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL), - B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), - B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), - B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), - B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), - B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), - B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), - B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), - B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), - B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), - B("Bifferos", "Bifferboard", 1, "http://bifferos.co.uk/", NULL), - B("Biostar", "N68S3+", 1, NULL, NULL), - B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), - B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), - B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), - B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), - B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), - B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), - B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), - B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), - B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), - B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), - B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL), - B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), - B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), - B("Elitegroup", "K7SEM (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL), - B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), - B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL), - B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), - B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), - B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), - B("EPoX", "EP-8NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL), - B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), - B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), - B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), - B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL), - B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), - B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), - B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), - B("Foxconn", "A6VMX", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), - B("Foxconn", "P4M800P7MA-RS2", 1, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL), - B("Freetech", "P6F91i", 1, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), - B("Fujitsu-Siemens", "ESPRIMO P5915", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), - B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), - B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), - B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), - B("GIGABYTE", "GA-6IEM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL), - B("GIGABYTE", "GA-6VXE7+", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL), - B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), - B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL), - B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL), - B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL), - B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), - B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), - B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL), - B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL), - B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), - B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), - B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), - B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), - B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), - B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), - B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), - B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), - B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), - B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), - B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), - B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), - B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), - B("GIGABYTE", "GA-K8NS Pro-939", 0, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."), - B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), - B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), - B("GIGABYTE", "GA-M720-US3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL), - B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL), - B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL), - B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL), - B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL), - B("GIGABYTE", "GA-MA780G-UD3H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL), - B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL), - B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ - B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), - B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), - B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), - B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), - B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), - B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), - B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL), - B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL), - B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), - B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), - B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), - B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), - B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), - B("HP", "ProLiant N40L", 1, NULL, NULL), - B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL), - B("HP", "dc7800", 0, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."), - B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), - B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), - B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"), - B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."), - B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), - B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), - B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), - B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), - B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"), - B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), - B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), - B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), - B("Intel", "EP80759", 1, NULL, NULL), - B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), - B("Intel", "Greencity", 1, NULL, "Intel reference board."), - B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), - B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), - B("Jetway", "J-7BXAN", 1, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL), - B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), - B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), - B("Lanner", "EM-8510C", 1, NULL, NULL), - B("Lex", "CV700A", 1, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), - B("Mitac", "6513WU", 1, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL), - B("MSC", "Q7-TCTC", 1, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL), - B("MSI", "MS-6153", 1, "http://www.msi.com/product/mb/MS-6153.html", NULL), - B("MSI", "MS-6156", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL), - B("MSI", "MS-6163 (MS-6163 Pro)",1, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL), - B("MSI", "MS-6178", 0, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), - B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL), - B("MSI", "MS-6391 (845 Pro4)", 1, "http://www.msi.com/product/mb/845-Pro4.html", NULL), - B("MSI", "MS-6561 (745 Ultra)", 1, "http://www.msi.com/product/mb/745-Ultra.html", NULL), - B("MSI", "MS-6566 (845 Ultra-C)",1, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL), - B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/product/mb/K7N2.html", NULL), - B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), - B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL), - B("MSI", "MS-6702E (K8T Neo2-F)",1, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), - B("MSI", "MS-6712 (KT4V)", 1, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL), - B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 1, "http://www.msi.com/service/search/?kw=6787&type=product", NULL), - B("MSI", "MS-7005 (651M-L)", 1, "http://www.msi.com/product/mb/651M-L.html", NULL), - B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL), - B("MSI", "MS-7046", 1, "http://www.heimir.de/ms7046/", NULL), - B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), - B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), - B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), - B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL), - B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), - B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL), - B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/product/mb/PM8M3-V.html", NULL), - B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL), - B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/product/mb/K9VGM-V.html", NULL), - B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL), - B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), - B("MSI", "MS-7309 (K9N6PGM2-V2)", 1, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL), - B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL), - B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), - B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), - B("MSI", "MS-7369 (K9N Neo V2)", 1, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), - B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), - B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), - B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), - B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), - B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL), - B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), - B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), - B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), - B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), - B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), - B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), - B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), - B("Nokia", "IP530", 1, NULL, NULL), - B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL), - B("PCCHIPS ", "M863G (V5.1A)", 1, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL), - B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL), - B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL), - B("PC Engines", "Alix.2c3", 1, "http://pcengines.ch/alix2c3.htm", NULL), - B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL), - B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL), - B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL), - B("PC Engines", "Alix.6f2", 1, "http://pcengines.ch/alix6f2.htm", NULL), - B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL), - B("Portwell", "PEB-4700VLA", 1, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), - B("RCA", "RM4100", 1, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), - B("Samsung", "Polaris 32", 1, NULL, NULL), - B("Shuttle", "AK31", 1, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL), - B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), - B("Shuttle", "AV11V30", 1, NULL, NULL), - B("Shuttle", "AV18E2", 1, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL), - B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), - B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), - B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), - B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), - B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("Soyo", "SY-6BA+ III", 1, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL), - B("Soyo", "SY-7VCA", 1, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL), - B("Sun", "Blade x6250", 1, "http://www.sun.com/servers/blades/x6250/", NULL), - B("Sun", "Fire x4150", 0, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."), - B("Sun", "Fire x4200", 0, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."), - B("Sun", "Fire x4540", 0, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."), - B("Sun", "Fire x4600", 0, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), - B("Sun", "Ultra 40 M2", 1, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL), - B("Supermicro", "H8QC8", 1, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), - B("Supermicro", "X5DP8-G2", 1, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), - B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), - B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), - B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), - B("Supermicro", "X8DTE-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL), - B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), - B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), - B("Supermicro", "X8DTT-HIBQF", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL), - B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), - B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), - B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), - B("Supermicro", "X9SCA-F", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), - B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), - B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL), - B("Thomson", "IP1000", 1, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL), - B("TriGem", "Anaheim-3", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL), - B("TriGem", "Lomita", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL), - B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), - B("Tyan", "S1846 (Tsunami ATX)", 1, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL), - B("Tyan", "S2466 (Tiger MPX)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL), - B("Tyan", "S2498 (Tomcat K7M)", 1, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL), - B("Tyan", "S2723 (Tiger i7501)", 1, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL), - B("Tyan", "S2881 (Thunder K8SR)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL), - B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), - B("Tyan", "S2882-D (Thunder K8SD Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL), - B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), - B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), - B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), - B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), - B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), - B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), - B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), - B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), - B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL), - B("Tyan", "S5180 (Toledo i965R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL), - B("Tyan", "S5191 (Toledo i3000R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL), - B("Tyan", "S5197 (Toledo i3010W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL), - B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), - B("Tyan", "S5211-1U (Toledo i3200R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL), - B("Tyan", "S5220 (Toledo q35T)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL), - B("Tyan", "S5375 (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL), - B("Tyan", "S5376 (Tempest i5100W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."), - B("Tyan", "S5377 (Tempest i5100T)", 1, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL), - B("Tyan", "S5382 (Tempest i5000PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL), - B("Tyan", "S5397 (Tempest i5400PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL), - B("VIA", "EPIA M/MII/...", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */ - B("VIA", "EPIA SP", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "EPIA-CN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "EPIA EK", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL), - B("VIA", "EPIA-EX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "EPIA-LN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "EPIA-M700", 1, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL), - B("VIA", "EPIA-N/NL", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */ - B("VIA", "EPIA-NX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "NAB74X0", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), - B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), - B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), - B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), + B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), + B("abit", "A-S78H", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "AN-M2", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "AV8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "AX8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "BM6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "Fatal1ty F-I90HD", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "IC7", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "IP35", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), + B("abit", "IP35 Pro", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), + B("abit", "IS-10", BAD, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."), + B("abit", "KN8 Ultra", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "NF-M2 nView", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "NF-M2S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "NF7-S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "VA6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), + B("abit", "VT6X4", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), + B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), + B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), + B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), + B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ + B("AOpen", "i945GMx-VFX", OK, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."), + B("AOpen", "vKM400Am-S", OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL), + B("Artec Group","DBE61", OK, "http://wiki.thincan.org/DBE61", NULL), + B("Artec Group","DBE62", OK, "http://wiki.thincan.org/DBE62", NULL), + B("ASI", "MB-5BLMP", OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), + B("ASRock", "775i65G", OK, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL), + B("ASRock", "890GX Extreme3", OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL), + B("ASRock", "939A785GMH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL), + B("ASRock", "A330GC", OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), + B("ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), + B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), + B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), + B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), + B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), + B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), + B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), + B("ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), + B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), + B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), + B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), + B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), + B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), + B("ASUS", "A7V133", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), + B("ASUS", "A7V333", OK, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), + B("ASUS", "A7V400-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), + B("ASUS", "A7V600-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), + B("ASUS", "A7V8X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), + B("ASUS", "A7V8X-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), + B("ASUS", "A7V8X-MX SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), + B("ASUS", "A7V8X-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), + B("ASUS", "A8M2N-LA (NodusM3-GL8E)", OK, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), + B("ASUS", "A8N-E", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), + B("ASUS", "A8N-LA (Nagami-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), + B("ASUS", "A8N-SLI", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), + B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Untested board enable."), + B("ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), + B("ASUS", "A8N-VM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), + B("ASUS", "A8N-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), + B("ASUS", "A8NE-FM/S", OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), + B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), + B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), + B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), + B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), + B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), + B("ASUS", "K8N", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), + B("ASUS", "K8V", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), + B("ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), + B("ASUS", "K8V-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), + B("ASUS", "K8V-X SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), + B("ASUS", "KFSN4-DRE/SAS", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL), + B("ASUS", "M2A-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), + B("ASUS", "M2A-VM (HDMI)", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL), + B("ASUS", "M2N32-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), + B("ASUS", "M2N-E", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-E SLI", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), + B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), + B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), + B("ASUS", "M2NPV-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), + B("ASUS", "M2V", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), + B("ASUS", "M2V-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), + B("ASUS", "M3A", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), + B("ASUS", "M3A76-CM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), + B("ASUS", "M3A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), + B("ASUS", "M3N78-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), + B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), + B("ASUS", "M4A785TD-M EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), + B("ASUS", "M4A785TD-V EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), + B("ASUS", "M4A78LT-M LE", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), + B("ASUS", "M4A79T Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), + B("ASUS", "M4A87TD/USB3", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), + B("ASUS", "M4A89GTD PRO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), + B("ASUS", "M4N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), + B("ASUS", "M5A99X EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), + B("ASUS", "MEW-AM", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "MEW-VM", BAD, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "OPLX-M", NT, NULL, "Untested board enable."), + B("ASUS", "P2B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), + B("ASUS", "P2B-D", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), + B("ASUS", "P2B-DS", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL), + B("ASUS", "P2B-F", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), + B("ASUS", "P2B-N", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL), + B("ASUS", "P2E-M", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL), + B("ASUS", "P2L97-S", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL), + B("ASUS", "P3B-F", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "P4B266", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), + B("ASUS", "P4B266-LM", OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), + B("ASUS", "P4B533-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), + B("ASUS", "P4C800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), + B("ASUS", "P4GV-LA (Guppy)", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), + B("ASUS", "P4P800", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), + B("ASUS", "P4P800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), + B("ASUS", "P4P800-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), + B("ASUS", "P4SC-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), + B("ASUS", "P4SD-LA", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), + B("ASUS", "P4S533-X", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), + B("ASUS", "P4S800-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), + B("ASUS", "P5A", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), + B("ASUS", "P5B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), + B("ASUS", "P5B-Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), + B("ASUS", "P5BV-M", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), + B("ASUS", "P5GC-MX/1333", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), + B("ASUS", "P5GD1 Pro", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), + B("ASUS", "P5GD1-VM/S", OK, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), + B("ASUS", "P5GD1(-VM)", NT, NULL, "Untested board enable."), + B("ASUS", "P5GD2 Premium", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), + B("ASUS", "P5GDC Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), + B("ASUS", "P5GDC-V Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), + B("ASUS", "P5GD2/C variants", NT, NULL, "Untested board enable."), + B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL), + B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), + B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), + B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL), + B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), + B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), + B("ASUS", "P5LD2", NT, NULL, "Untested board enable."), + B("ASUS", "P5LP-LE (Lithium-UL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), + B("ASUS", "P5LP-LE (Epson OEM)", OK, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), + B("ASUS", "P5LP-LE", BAD, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), + B("ASUS", "P5N-D", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), + B("ASUS", "P5N-E SLI", NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), + B("ASUS", "P5N32-E SLI", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), + B("ASUS", "P5N7A-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL), + B("ASUS", "P5ND2-SLI Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), + B("ASUS", "P5PE-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), + B("ASUS", "P5QPL-AM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL), + B("ASUS", "P5VD1-X", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), + B("ASUS", "P6T SE", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), + B("ASUS", "P6T Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), + B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), + B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), + B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), + B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), + B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), + B("BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), + B("Bifferos", "Bifferboard", OK, "http://bifferos.co.uk/", NULL), + B("Biostar", "N68S3+", OK, NULL, NULL), + B("Biostar", "M6TBA", BAD, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("Biostar", "M7NCD Pro", OK, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), + B("Biostar", "P4M80-M4", OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), + B("Biostar", "TA780G M2+", OK, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), + B("Boser", "HS-6637", BAD, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), + B("Congatec", "conga-X852", OK, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), + B("Dell", "OptiPlex GX1", OK, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), + B("Dell", "PowerEdge 1850", OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), + B("DFI", "855GME-MGF", BAD, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), + B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), + B("Elitegroup", "GeForce6100SM-M ", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), + B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL), + B("Elitegroup", "K7S5A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), + B("Elitegroup", "K7S6A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), + B("Elitegroup", "K7SEM (V1.0A)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL), + B("Elitegroup", "K7VTA3", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), + B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Elitegroup", "P4VXMS (V1.0A)", OK, NULL, NULL), + B("Elitegroup", "P6IWP-Fe", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Elitegroup", "P6VAP-A+", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), + B("Elitegroup", "RS485M-M", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Emerson", "ATCA-7360", OK, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), + B("EPoX", "EP-8K5A2", OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), + B("EPoX", "EP-8NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL), + B("EPoX", "EP-9NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), + B("EPoX", "EP-8RDA3+", OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), + B("EPoX", "EP-BX3", OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), + B("EVGA", "132-CK-NF78", OK, "http://www.evga.com/articles/385.asp", NULL), + B("EVGA", "270-WS-W555-A2 (Classified SR-2)", OK, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), + B("FIC", "VA-502", BAD, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), + B("Foxconn", "6150K8MD-8EKRSH", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), + B("Foxconn", "A6VMX", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), + B("Foxconn", "P4M800P7MA-RS2", OK, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL), + B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), + B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), + B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), + B("GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), + B("GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), + B("GIGABYTE", "GA-6IEM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL), + B("GIGABYTE", "GA-6VXE7+", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL), + B("GIGABYTE", "GA-6ZMA", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), + B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL), + B("GIGABYTE", "GA-770TA-UD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL), + B("GIGABYTE", "GA-7DXR", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL), + B("GIGABYTE", "GA-7VT600", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), + B("GIGABYTE", "GA-7ZM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), + B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL), + B("GIGABYTE", "GA-8I945GZME-RH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL), + B("GIGABYTE", "GA-8IP775", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), + B("GIGABYTE", "GA-8IRML", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), + B("GIGABYTE", "GA-8PE667 Ultra 2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), + B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), + B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), + B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), + B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), + B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), + B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), + B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), + B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), + B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), + B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."), + B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), + B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), + B("GIGABYTE", "GA-M720-US3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL), + B("GIGABYTE", "GA-MA69VM-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL), + B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL), + B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL), + B("GIGABYTE", "GA-MA770T-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL), + B("GIGABYTE", "GA-MA780G-UD3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL), + B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL), + B("GIGABYTE", "GA-MA78GM-S2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ + B("GIGABYTE", "GA-MA78GPM-DS2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), + B("GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), + B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), + B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), + B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), + B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL), + B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", OK, NULL, NULL), + B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), + B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), + B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), + B("HP", "ProLiant DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), + B("HP", "ProLiant DL165 G6", OK, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), + B("HP", "ProLiant N40L", OK, NULL, NULL), + B("HP", "Puffer2-UL8E", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL), + B("HP", "dc7800", BAD, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."), + B("HP", "Vectra VL400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "Vectra VL420 SFF", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "xw4400 (0A68h)", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"), + B("HP", "xw9400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."), + B("IBASE", "MB899", OK, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), + B("IBM", "x3455", OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), + B("IEI", "PICOe-9452", OK, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), + B("Intel", "D201GLY", OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), + B("Intel", "D425KT", BAD, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"), + B("Intel", "D865GLC", BAD, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), + B("Intel", "DG45ID", BAD, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), + B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), + B("Intel", "EP80759", OK, NULL, NULL), + B("Intel", "Foxhollow", OK, NULL, "Intel reference board."), + B("Intel", "Greencity", OK, NULL, "Intel reference board."), + B("Intel", "SE440BX-2", BAD, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), + B("IWILL", "DK8-HTX", OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), + B("Jetway", "J-7BXAN", OK, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL), + B("Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), + B("Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), + B("Lanner", "EM-8510C", OK, NULL, NULL), + B("Lex", "CV700A", OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), + B("Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL), + B("MSC", "Q7-TCTC", OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL), + B("MSI", "MS-6153", OK, "http://www.msi.com/product/mb/MS-6153.html", NULL), + B("MSI", "MS-6156", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL), + B("MSI", "MS-6163 (MS-6163 Pro)", OK, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL), + B("MSI", "MS-6178", BAD, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), + B("MSI", "MS-6330 (K7T Turbo)", OK, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL), + B("MSI", "MS-6391 (845 Pro4)", OK, "http://www.msi.com/product/mb/845-Pro4.html", NULL), + B("MSI", "MS-6561 (745 Ultra)", OK, "http://www.msi.com/product/mb/745-Ultra.html", NULL), + B("MSI", "MS-6566 (845 Ultra-C)", OK, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL), + B("MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/product/mb/K7N2.html", NULL), + B("MSI", "MS-6577 (Xenon)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), + B("MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL), + B("MSI", "MS-6702E (K8T Neo2-F)", OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), + B("MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL), + B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL), + B("MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/product/mb/651M-L.html", NULL), + B("MSI", "MS-7025 (K8N Neo2 Platinum)", OK, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL), + B("MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL), + B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), + B("MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), + B("MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), + B("MSI", "MS-7142 (K8MM-V)", OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL), + B("MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), + B("MSI", "MS-7207 (K8NGM2-L)", OK, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL), + B("MSI", "MS-7211 (PM8M3-V)", OK, "http://www.msi.com/product/mb/PM8M3-V.html", NULL), + B("MSI", "MS-7236 (945PL Neo3)", OK, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL), + B("MSI", "MS-7253 (K9VGM-V)", OK, "http://www.msi.com/product/mb/K9VGM-V.html", NULL), + B("MSI", "MS-7255 (P4M890M)", OK, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL), + B("MSI", "MS-7260 (K9N Neo PCB 1.0)", BAD, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), + B("MSI", "MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL), + B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL), + B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), + B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), + B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), + B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), + B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), + B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), + B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), + B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL), + B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL), + B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7640 (890FXA-GD70)", OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), + B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), + B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), + B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), + B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), + B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), + B("Nokia", "IP530", OK, NULL, NULL), + B("PCCHIPS ", "M598LMR (V9.0)", OK, NULL, NULL), + B("PCCHIPS ", "M863G (V5.1A)", OK, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL), + B("PC Engines", "Alix.1c", OK, "http://pcengines.ch/alix1c.htm", NULL), + B("PC Engines", "Alix.2c2", OK, "http://pcengines.ch/alix2c2.htm", NULL), + B("PC Engines", "Alix.2c3", OK, "http://pcengines.ch/alix2c3.htm", NULL), + B("PC Engines", "Alix.2d3", OK, "http://pcengines.ch/alix2d3.htm", NULL), + B("PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL), + B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL), + B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL), + B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL), + B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), + B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), + B("Samsung", "Polaris 32", OK, NULL, NULL), + B("Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL), + B("Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), + B("Shuttle", "AV11V30", OK, NULL, NULL), + B("Shuttle", "AV18E2", OK, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL), + B("Shuttle", "FD37", OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), + B("Shuttle", "FH67", OK, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), + B("Shuttle", "FN25", OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), + B("Shuttle", "X50/X50(B)", OK, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), + B("Soyo", "SY-5VD", BAD, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("Soyo", "SY-6BA+ III", OK, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL), + B("Soyo", "SY-7VCA", OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL), + B("Sun", "Blade x6250", OK, "http://www.sun.com/servers/blades/x6250/", NULL), + B("Sun", "Fire x4150", BAD, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."), + B("Sun", "Fire x4200", BAD, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."), + B("Sun", "Fire x4540", BAD, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."), + B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), + B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL), + B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), + B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), + B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), + B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), + B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), + B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL), + B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), + B("Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), + B("Supermicro", "X8DTT-HIBQF", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL), + B("Supermicro", "X8DTU-6TF+", BAD, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X8DTU-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), + B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), + B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), + B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), + B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), + B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL), + B("Thomson", "IP1000", OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL), + B("TriGem", "Anaheim-3", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL), + B("TriGem", "Lomita", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL), + B("Tyan", "S5375-1U (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), + B("Tyan", "S1846 (Tsunami ATX)", OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL), + B("Tyan", "S2466 (Tiger MPX)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL), + B("Tyan", "S2498 (Tomcat K7M)", OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL), + B("Tyan", "S2723 (Tiger i7501)", OK, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL), + B("Tyan", "S2881 (Thunder K8SR)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL), + B("Tyan", "S2882 (Thunder K8S Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), + B("Tyan", "S2882-D (Thunder K8SD Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL), + B("Tyan", "S2891 (Thunder K8SRE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), + B("Tyan", "S2892 (Thunder K8SE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), + B("Tyan", "S2895 (Thunder K8WE)", OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), + B("Tyan", "S2912 (Thunder n3600R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), + B("Tyan", "S2915 (Thunder n6650W)", OK, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), + B("Tyan", "S2915-E (Thunder n6650W)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), + B("Tyan", "S2933 (Thunder n3600S)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), + B("Tyan", "S3095 (Tomcat i945GM)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), + B("Tyan", "S3992 (Thunder h2000M)", OK, "http://tyan.com/product_board_detail.aspx?pid=235", NULL), + B("Tyan", "S5180 (Toledo i965R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL), + B("Tyan", "S5191 (Toledo i3000R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL), + B("Tyan", "S5197 (Toledo i3010W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL), + B("Tyan", "S5211 (Toledo i3210W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), + B("Tyan", "S5211-1U (Toledo i3200R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL), + B("Tyan", "S5220 (Toledo q35T)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL), + B("Tyan", "S5375 (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL), + B("Tyan", "S5376 (Tempest i5100W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."), + B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL), + B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL), + B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL), + B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */ + B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "EPIA-CN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "EPIA EK", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL), + B("VIA", "EPIA-EX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "EPIA-LN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "EPIA-M700", OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL), + B("VIA", "EPIA-N/NL", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */ + B("VIA", "EPIA-NX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "NAB74X0", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "pc2500e", OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), + B("VIA", "PC3500G", OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), + B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL), + B("ZOTAC", "GeForce 8200", OK, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "ZBOX HD-ID11", OK, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif {}, @@ -975,19 +974,19 @@ const struct board_info boards_known[] = { /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info laptops_known[] = { #if defined(__i386__) || defined(__x86_64__) - B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), - B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), - B("ASUS", "A8Jm", 1, NULL, NULL), - B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), - B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), - B("Clevo", "P150HM", 0, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), - B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), - B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), - B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), - B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."), - B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), - B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), + B("Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), + B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), + B("ASUS", "A8Jm", OK, NULL, NULL), + B("ASUS", "Eee PC 701 4G", BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "M6Ne", NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), + B("Clevo", "P150HM", BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Dell", "Latitude CPi A366XT", BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), + B("HP/Compaq", "nx9005", BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), + B("HP/Compaq", "nx9010", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), + B("IBM/Lenovo", "Thinkpad T40p", BAD, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), + B("IBM/Lenovo", "Thinkpad T410s", BAD, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."), + B("IBM/Lenovo", "240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), + B("Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), #endif {}, diff --git a/print_wiki.c b/print_wiki.c index 377154d..9a9cd83 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -136,9 +136,9 @@ static void wiki_helper(const char *devicetype, int cols, const struct board_match *b = board_matches; for (i = 0; boards[i].vendor != NULL; i++) { - if (boards[i].working) + if (boards[i].working == OK) boardcount_good++; - else + if (boards[i].working == BAD) boardcount_bad++; } @@ -171,7 +171,8 @@ static void wiki_helper(const char *devicetype, int cols, b[k].lb_vendor ? b[k].lb_vendor : "", b[k].lb_vendor ? ":" : "", b[k].lb_vendor ? b[k].lb_part : "", - (boards[i].working) ? "OK" : "No"); + (boards[i].working == OK) ? "OK" : + (boards[i].working == NT) ? "?3" : "No"); if (boards[i].note) { printf("%d\n", num_notes + 1); diff --git a/programmer.h b/programmer.h index c99e37f..479d963 100644 --- a/programmer.h +++ b/programmer.h @@ -192,7 +192,7 @@ extern const struct board_match board_matches[]; struct board_info { const char *vendor; const char *name; - const int working; + const enum test_state working; #ifdef CONFIG_PRINT_WIKI const char *url; const char *note; @@ -217,7 +217,7 @@ extern struct pci_dev *pcidev_dev; struct pcidev_status { uint16_t vendor_id; uint16_t device_id; - int status; + const enum test_state status; const char *vendor_name; const char *device_name; }; @@ -416,7 +416,7 @@ extern const struct pcidev_status ata_hpt[]; struct usbdev_status { uint16_t vendor_id; uint16_t device_id; - int status; + const enum test_state status; const char *vendor_name; const char *device_name; }; -- 1.7.1

1 0

[PATCH 0/7] wiki patches 3.0
by Stefan Tauner 03 Mar '12

03 Mar '12

6/7 and 7/7 are new, the rest is unchanged(?) but rebased to current HEAD. 7/7 should be discussed before reviewing 2/7 in detail because id merge them if 7/7's concept is accepted in general. Stefan Tauner (7): Introduce and use enum test_state Refactor PCI and USB device status printing print_wiki.c fix columns calculations squash! print_wiki.c fix columns calculations squash! print_wiki.c fix columns calculations print_wiki.c: add a programmer column to the PCI and USB devices lists [RFC] Unify usbdev_status and pcidev_status into dev_status. drkaiser.c | 2 +- flash.h | 7 +- flashrom.c | 43 +++ ft2232_spi.c | 15 +- gfxnvidia.c | 2 +- nic3com.c | 2 +- nicintel.c | 2 +- nicintel_spi.c | 2 +- nicrealtek.c | 2 +- ogp_spi.c | 2 +- pcidev.c | 7 +- print.c | 989 ++++++++++++++++++++++++++------------------------------ print_wiki.c | 216 ++++++++----- programmer.h | 66 ++-- satamv.c | 2 +- satasii.c | 2 +- 16 files changed, 686 insertions(+), 675 deletions(-) dont fear the difflog... it's not that bad actually :)

1 0

Re: [flashrom] [PATCH] linux_spi.c: set SPI mode, bit order and bits per word on init.
by Stefan Tauner 03 Mar '12

03 Mar '12

On Sat, 3 Mar 2012 14:48:34 +0100 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Previously we relied on a correctly set up state. > > Also, we start to rely on the shutdown function for cleanup after > registering it, i.e. we no longer explicitly call close(fd) after > register_shutdown(). > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > linux_spi.c | 22 +++++++++++++++++++--- > 1 files changed, 19 insertions(+), 3 deletions(-) > > […] tested by GNUtoo, acked by carldani on IRC and committed in r1512. thanks everyone involved! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1512 - trunk
by repository service 03 Mar '12

03 Mar '12

Author: stefanct Date: Sat Mar 3 19:09:33 2012 New Revision: 1512 URL: http://flashrom.org/trac/flashrom/changeset/1512 Log: linux_spi.c: set SPI mode, bit order and bits per word on init. Previously we relied on a correctly set up state. Also, we start to rely on the shutdown function for cleanup after registering it, i.e. we no longer explicitly call close(fd) after register_shutdown(). Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Tested-by: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/linux_spi.c Modified: trunk/linux_spi.c ============================================================================== --- trunk/linux_spi.c Thu Mar 1 23:38:27 2012 (r1511) +++ trunk/linux_spi.c Sat Mar 3 19:09:33 2012 (r1512) @@ -57,6 +57,10 @@ { char *p, *endp, *dev; uint32_t speed = 0; + /* FIXME: make the following configurable by CLI options. */ + /* SPI mode 0 (beware this also includes: MSB first, CS active low and others */ + const uint8_t mode = SPI_MODE_0; + const uint8_t bits = 8; dev = extract_programmer_param("dev"); if (!dev || !strlen(dev)) { @@ -81,19 +85,31 @@ return 1; } + if (register_shutdown(linux_spi_shutdown, NULL)) + return 1; + /* We rely on the shutdown function for cleanup from here on. */ + if (speed > 0) { if (ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed) == -1) { - msg_perr("%s: failed to set speed %dHz: %s\n", + msg_perr("%s: failed to set speed to %d Hz: %s\n", __func__, speed, strerror(errno)); - close(fd); return 1; } msg_pdbg("Using %d kHz clock\n", speed); } - if (register_shutdown(linux_spi_shutdown, NULL)) + if (ioctl(fd, SPI_IOC_WR_MODE, &mode) == -1) { + msg_perr("%s: failed to set SPI mode to 0x%02x: %s\n", + __func__, mode, strerror(errno)); return 1; + } + + if (ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits) == -1) { + msg_perr("%s: failed to set the number of bits per SPI word to %u: %s\n", + __func__, bits == 0 ? 8 : bits, strerror(errno)); + return 1; + } register_spi_programmer(&spi_programmer_linux);

1 0

[PATCH] Prevent submission of empty read requests in linux_spi
by Michael Karcher 03 Mar '12

03 Mar '12

The submission of zero-sized read requests in a write-only transaction fails at least for omap2_mcspi drivers and is pointless in general. Even with this patch, zero-sized write requests might be submitted for read-only transactions, but for most SPI chips, there always is a command transferred (written) before reading data, so there is no such thing as a pure-read transaction. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- linux_spi.c | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-) diff --git a/linux_spi.c b/linux_spi.c index d994389..3d1ca3e 100644 --- a/linux_spi.c +++ b/linux_spi.c @@ -114,6 +114,7 @@ static int linux_spi_send_command(struct flashctx *flash, unsigned int writecnt, const unsigned char *txbuf, unsigned char *rxbuf) { + unsigned iocontrol_code; struct spi_ioc_transfer msg[2] = { { .tx_buf = (uint64_t)(ptrdiff_t)txbuf, @@ -128,7 +129,14 @@ static int linux_spi_send_command(struct flashctx *flash, unsigned int writecnt, if (fd == -1) return -1; - if (ioctl(fd, SPI_IOC_MESSAGE(2), msg) == -1) { + /* Just submit the first (write) request in case there is nothing + to read. Otherwise submit both requests */ + if (readcnt == 0) + iocontrol_code = SPI_IOC_MESSAGE(1); + else + iocontrol_code = SPI_IOC_MESSAGE(2); + + if (ioctl(fd, iocontrol_code, msg) == -1) { msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); return -1; } -- 1.7.9

1 0

Re: [flashrom] [PATCH] linux_spi.c: set SPI mode, word justification and bits per word on init.
by Carl-Daniel Hailfinger 03 Mar '12

03 Mar '12

Am 02.03.2012 00:43 schrieb Stefan Tauner: > Previously we relied on a correctly set up state. > > --- > untested. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > linux_spi.c | 23 +++++++++++++++++++++++ > 1 files changed, 23 insertions(+), 0 deletions(-) > > diff --git a/linux_spi.c b/linux_spi.c > index d994389..d29c59a 100644 > --- a/linux_spi.c > +++ b/linux_spi.c > @@ -57,6 +57,8 @@ int linux_spi_init(void) > { > char *p, *endp, *dev; > uint32_t speed = 0; > + /* FIXME: make the following configurable by CLI options. */ > + uint8_t mode = SPI_MODE_0, lsb = 0, bits = 0; /* mode 0, msb first, 8 bits */ Can you move that comment above the variable definitions? Where should we note that SPI_MODE_0 also implies CS# active low? > > dev = extract_programmer_param("dev"); > if (!dev || !strlen(dev)) { > @@ -92,6 +94,27 @@ int linux_spi_init(void) > msg_pdbg("Using %d kHz clock\n", speed); > } > > + if (ioctl(fd, SPI_IOC_WR_MODE, &mode) == -1) { > + msg_perr("%s: failed to set SPI mode to %u: %s\n", > + __func__, mode, strerror(errno)); > + close(fd); > + return 1; > + } > + > + if (ioctl(fd, SPI_IOC_WR_LSB_FIRST, &lsb) == -1) { > + msg_perr("%s: failed to set SPI justification to %u: %s\n", > + __func__, lsb, strerror(errno)); This message would benefit from an explanation what SPI justification is. Suggestion: msg_perr("%s: failed to set SPI bit order to %s first: %s\n", __func_, lsb ? "LSB" : "MSB", strerror(errno)); > + close(fd); > + return 1; > + } > + > + if (ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits) == -1) { > + msg_perr("%s: failed to set the number of bits in an SPI word to %u: %s\n", > + __func__, bits, strerror(errno)); bits is 0. The error message would suggest that we tried to set the number of bits to 0. Does 0 also mean 8 bits, or would we have to set 8 bits with bits=8? > + close(fd); > + return 1; > + } > + > if (register_shutdown(linux_spi_shutdown, NULL)) > return 1; > As an alternative, we could avoid the whole close(fd) dance by calling register_shutdown() first, and then letting it do the work for us automatically after we return 1. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

ASUSTeK M2N-MX SE / chipset NVIDIA MCP61
by Arnaud DEBEAUVAIS 03 Mar '12

03 Mar '12

Hi, I guess the later versions might already support this shipset, as I am on Debian Squeeze (Stable), but just in case it can help you : flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N-MX SE" Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e0, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Have a great weekend. Openly yours, -- Arnaud DEBEAUVAIS arnaud(a)debeauvais.org Tux 100 10& 10 100 Tux :wq

1 0

Re: [flashrom] compiling flashrom for Debian/kFreeBSD
by Carl-Daniel Hailfinger 02 Mar '12

02 Mar '12

Am 25.02.2012 11:46 schrieb Robert Millan: > El 25 de febrer de 2012 0:49, Carl-Daniel Hailfinger >> El 24 de > febrer de 2012 0:55, Carl-Daniel Hailfinger >>> <c-d.hailfinger.devel.2006(a)gmx.net> ha escrit: >>>> #include <machine/cpufunc.h> >>>> #define off64_t off_t >>>> #define lseek64 lseek >>> Actually, we have machine/cpufunc.h (we have everything in machine/* >>> actually). The off_t / lseek defines after this look dangerous though >>> (they collide with glibc definitions). >> Comment has been replaced with >> /* Note that FreeBSD kernel with glibc has conflicting out[bwl] definitions >> * in machine/cpufunc.h and sys/io.h. Use cpufunc.h only for plain FreeBSD. >> */ > Uhm no, we removed the conflicts. We need to allow programs to > include both headers painlessly. Again, just pick the one you prefer. > cpufunc.h is supposed to work, and if it doesn't it's a bug. Thanks for the info, I have adjusted the comment: /* Note that Debian/kFreeBSD (FreeBSD with glibc) machine/cpufunc.h contains out[bwl] definitions which are incompatible with FreeBSD machine/cpufunc.h. Use machine/cpufunc.h only for plain FreeBSD. */ Background: FreeBSD machine/cpufunc.h has outb(port,data). Linux/glibc sys/io.h has outb(data,port). Regards, Carl-Daniel -- http://www.hailfinger.org/

2 2

Re: [flashrom] [PATCH] linux_spi.c: set SPI mode, word justification and bits per word on init.
by Michael Karcher 02 Mar '12

02 Mar '12

Am Freitag, den 02.03.2012, 00:43 +0100 schrieb Stefan Tauner: > Previously we relied on a correctly set up state. Looks good. Still untested, though. > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> A test would be nice, though, but I'm afraid we can't find a tester quickly. Regards, Michael Karcher

1 0

[PATCH] linux_spi.c: set SPI mode, word justification and bits per word on init.
by Stefan Tauner 02 Mar '12

02 Mar '12

Previously we relied on a correctly set up state. --- untested. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- linux_spi.c | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) diff --git a/linux_spi.c b/linux_spi.c index d994389..d29c59a 100644 --- a/linux_spi.c +++ b/linux_spi.c @@ -57,6 +57,8 @@ int linux_spi_init(void) { char *p, *endp, *dev; uint32_t speed = 0; + /* FIXME: make the following configurable by CLI options. */ + uint8_t mode = SPI_MODE_0, lsb = 0, bits = 0; /* mode 0, msb first, 8 bits */ dev = extract_programmer_param("dev"); if (!dev || !strlen(dev)) { @@ -92,6 +94,27 @@ int linux_spi_init(void) msg_pdbg("Using %d kHz clock\n", speed); } + if (ioctl(fd, SPI_IOC_WR_MODE, &mode) == -1) { + msg_perr("%s: failed to set SPI mode to %u: %s\n", + __func__, mode, strerror(errno)); + close(fd); + return 1; + } + + if (ioctl(fd, SPI_IOC_WR_LSB_FIRST, &lsb) == -1) { + msg_perr("%s: failed to set SPI justification to %u: %s\n", + __func__, lsb, strerror(errno)); + close(fd); + return 1; + } + + if (ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits) == -1) { + msg_perr("%s: failed to set the number of bits in an SPI word to %u: %s\n", + __func__, bits, strerror(errno)); + close(fd); + return 1; + } + if (register_shutdown(linux_spi_shutdown, NULL)) return 1; -- 1.7.1

1 0

[PATCH] Fix parallel-style programmer access from SPI
by Carl-Daniel Hailfinger 01 Mar '12

01 Mar '12

Joey: This patch applies to current svn HEAD. Patch is untested, but it should work and not spit out any new error messages. RFC: Are those checks with abort a good idea or do they break stuff? exit(1) is not a nice thing for libflashrom, but then again, it's probably better than exploding. I'm also unsure about the parameter order of mmio_readn. The IT87 SPI driver has one quirk to speed up reading and writing: If a flash chip is 512 kByte or less, the flash chip can be completely mapped in memory and both read and write accesses are faster that way. The current IT87 SPI code did use the parallel programmer interface for memory mapped reads and writes, but that's the wrong abstraction. It has been fixed to use mmio_read*/mmio_write* for that purpose. Introduce sanity checks for all SPI/Parallel-style accesses before a possibly undefined union member is dereferenced. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-fix_par_programmer_access_from_spi/hwaccess.c =================================================================== --- flashrom-fix_par_programmer_access_from_spi/hwaccess.c (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/hwaccess.c (Arbeitskopie) @@ -169,6 +169,12 @@ return *(volatile uint32_t *) addr; } +void mmio_readn(void *addr, uint8_t *buf, size_t len) +{ + memcpy(buf, addr, len); + return; +} + void mmio_le_writeb(uint8_t val, void *addr) { mmio_writeb(cpu_to_le8(val), addr); Index: flashrom-fix_par_programmer_access_from_spi/flash.h =================================================================== --- flashrom-fix_par_programmer_access_from_spi/flash.h (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/flash.h (Arbeitskopie) @@ -247,6 +247,7 @@ void print_banner(void); void list_programmers_linebreak(int startcol, int cols, int paren); int selfcheck(void); +void shutdown_and_exit(int exitcode); int doit(struct flashctx *flash, int force, const char *filename, int read_it, int write_it, int erase_it, int verify_it); int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename); int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename); Index: flashrom-fix_par_programmer_access_from_spi/it87spi.c =================================================================== --- flashrom-fix_par_programmer_access_from_spi/it87spi.c (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/it87spi.c (Arbeitskopie) @@ -330,7 +330,7 @@ OUTB(0x06, it8716f_flashport + 1); OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); for (i = 0; i < flash->page_size; i++) - chip_writeb(flash, buf[i], bios + start + i); + mmio_writeb(buf[i], (void *)(bios + start + i)); OUTB(0, it8716f_flashport); /* Wait until the Write-In-Progress bit is cleared. * This usually takes 1-10 ms, so wait in 1 ms steps. @@ -356,7 +356,7 @@ if ((flash->total_size * 1024 > 512 * 1024)) { spi_read_chunked(flash, buf, start, len, 3); } else { - read_memmapped(flash, buf, start, len); + mmio_readn((void *)(flash->virtual_memory + start), buf, len); } return 0; Index: flashrom-fix_par_programmer_access_from_spi/internal.c =================================================================== --- flashrom-fix_par_programmer_access_from_spi/internal.c (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/internal.c (Arbeitskopie) @@ -387,6 +387,6 @@ static void internal_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len) { - memcpy(buf, (void *)addr, len); + mmio_readn((void *)addr, buf, len); return; } Index: flashrom-fix_par_programmer_access_from_spi/spi.c =================================================================== --- flashrom-fix_par_programmer_access_from_spi/spi.c (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/spi.c (Arbeitskopie) @@ -34,12 +34,22 @@ unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->spi.command(flash, writecnt, readcnt, writearr, readarr); } int spi_send_multicommand(struct flashctx *flash, struct spi_command *cmds) { + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->spi.multicommand(flash, cmds); } @@ -78,7 +88,13 @@ int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = flash->pgm->spi.max_data_read; + unsigned int max_data; + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } + max_data = flash->pgm->spi.max_data_read; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " @@ -91,7 +107,13 @@ int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int max_data = flash->pgm->spi.max_data_write; + unsigned int max_data; + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } + max_data = flash->pgm->spi.max_data_write; if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " @@ -106,6 +128,11 @@ { unsigned int addrbase = 0; + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } /* Check if the chip fits between lowest valid and highest possible * address. Highest possible address with the current SPI implementation * means 0xffffff, the highest unsigned 24bit number. @@ -138,6 +165,11 @@ int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->spi.write_256(flash, buf, start, len); } @@ -148,6 +180,11 @@ */ uint32_t spi_get_valid_read_addr(struct flashctx *flash) { + if (!(flash->pgm->buses_supported & BUS_SPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } switch (flash->pgm->spi.type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) Index: flashrom-fix_par_programmer_access_from_spi/flashrom.c =================================================================== --- flashrom-fix_par_programmer_access_from_spi/flashrom.c (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/flashrom.c (Arbeitskopie) @@ -357,43 +357,83 @@ void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } flash->pgm->par.chip_writeb(flash, val, addr); } void chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } flash->pgm->par.chip_writew(flash, val, addr); } void chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } flash->pgm->par.chip_writel(flash, val, addr); } void chip_writen(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } flash->pgm->par.chip_writen(flash, buf, addr, len); } uint8_t chip_readb(const struct flashctx *flash, const chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->par.chip_readb(flash, addr); } uint16_t chip_readw(const struct flashctx *flash, const chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->par.chip_readw(flash, addr); } uint32_t chip_readl(const struct flashctx *flash, const chipaddr addr) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } return flash->pgm->par.chip_readl(flash, addr); } void chip_readn(const struct flashctx *flash, uint8_t *buf, chipaddr addr, size_t len) { + if (!(flash->pgm->buses_supported & BUS_NONSPI)) { + msg_perr("%s called for wrong programmer type! Please report " + "a bug at flashrom(a)flashrom.org.\n", __func__); + shutdown_and_exit(1); + } flash->pgm->par.chip_readn(flash, buf, addr, len); } @@ -1700,6 +1740,15 @@ return 0; } +/* FIXME: Totally unacceptable for libflashrom, but it's better than a simple + * exit(1) for most places which just exit(1) for now. + */ +void shutdown_and_exit(int exitcode) +{ + programmer_shutdown(); + exit(exitcode); +} + /* This function signature is horrible. We need to design a better interface, * but right now it allows us to split off the CLI code. * Besides that, the function itself is a textbook example of abysmal code flow. Index: flashrom-fix_par_programmer_access_from_spi/programmer.h =================================================================== --- flashrom-fix_par_programmer_access_from_spi/programmer.h (Revision 1510) +++ flashrom-fix_par_programmer_access_from_spi/programmer.h (Arbeitskopie) @@ -312,6 +312,7 @@ uint8_t mmio_readb(void *addr); uint16_t mmio_readw(void *addr); uint32_t mmio_readl(void *addr); +void mmio_readn(void *addr, uint8_t *buf, size_t len); void mmio_le_writeb(uint8_t val, void *addr); void mmio_le_writew(uint16_t val, void *addr); void mmio_le_writel(uint32_t val, void *addr); -- http://www.hailfinger.org/

3 7

[commit] r1511 - trunk
by repository service 01 Mar '12

01 Mar '12

Author: hailfinger Date: Thu Mar 1 23:38:27 2012 New Revision: 1511 URL: http://flashrom.org/trac/flashrom/changeset/1511 Log: Fix parallel-style programmer access from ITE IT87/Winbond W83627 SPI The ITE IT87 SPI driver uses a trick to speed up reading and writing: If a flash chip is 512 kByte or less, the flash chip can be completely mapped in memory and both read and write accesses are faster that way. The current IT87 SPI code did use the parallel programmer interface for memory mapped reads and writes, but that's the wrong abstraction. It has been fixed to use mmio_read*/mmio_write* for that purpose. The Winbond W83627 SPI driver uses the same trick in its read path for all supported chip sizes. Fix it the same way. Switch internal_chip_readn to use mmio_readn as proper abstraction. Kudos to Michael Karcher for spotting the bugs. Reported-by: Johan Svensson <flashrom.js(a)crypt.se> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Tested-by: Johan Svensson <flashrom.js(a)crypt.se> Modified: trunk/hwaccess.c trunk/internal.c trunk/it87spi.c trunk/programmer.h trunk/wbsio_spi.c Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Mon Feb 27 20:44:16 2012 (r1510) +++ trunk/hwaccess.c Thu Mar 1 23:38:27 2012 (r1511) @@ -169,6 +169,12 @@ return *(volatile uint32_t *) addr; } +void mmio_readn(void *addr, uint8_t *buf, size_t len) +{ + memcpy(buf, addr, len); + return; +} + void mmio_le_writeb(uint8_t val, void *addr) { mmio_writeb(cpu_to_le8(val), addr); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Mon Feb 27 20:44:16 2012 (r1510) +++ trunk/internal.c Thu Mar 1 23:38:27 2012 (r1511) @@ -387,6 +387,6 @@ static void internal_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len) { - memcpy(buf, (void *)addr, len); + mmio_readn((void *)addr, buf, len); return; } Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Mon Feb 27 20:44:16 2012 (r1510) +++ trunk/it87spi.c Thu Mar 1 23:38:27 2012 (r1511) @@ -330,7 +330,7 @@ OUTB(0x06, it8716f_flashport + 1); OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); for (i = 0; i < flash->page_size; i++) - chip_writeb(flash, buf[i], bios + start + i); + mmio_writeb(buf[i], (void *)(bios + start + i)); OUTB(0, it8716f_flashport); /* Wait until the Write-In-Progress bit is cleared. * This usually takes 1-10 ms, so wait in 1 ms steps. @@ -356,7 +356,7 @@ if ((flash->total_size * 1024 > 512 * 1024)) { spi_read_chunked(flash, buf, start, len, 3); } else { - read_memmapped(flash, buf, start, len); + mmio_readn((void *)(flash->virtual_memory + start), buf, len); } return 0; Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Mon Feb 27 20:44:16 2012 (r1510) +++ trunk/programmer.h Thu Mar 1 23:38:27 2012 (r1511) @@ -312,6 +312,7 @@ uint8_t mmio_readb(void *addr); uint16_t mmio_readw(void *addr); uint32_t mmio_readl(void *addr); +void mmio_readn(void *addr, uint8_t *buf, size_t len); void mmio_le_writeb(uint8_t val, void *addr); void mmio_le_writew(uint16_t val, void *addr); void mmio_le_writel(uint32_t val, void *addr); Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Mon Feb 27 20:44:16 2012 (r1510) +++ trunk/wbsio_spi.c Thu Mar 1 23:38:27 2012 (r1511) @@ -202,7 +202,8 @@ static int wbsio_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - return read_memmapped(flash, buf, start, len); + mmio_readn((void *)(flash->virtual_memory + start), buf, len); + return 0; } #endif

1 0

Re: [flashrom] flashrom with HP XW9300
by Stefan Tauner 01 Mar '12

01 Mar '12

On Mon, 27 Feb 2012 07:55:04 +0100 Jürgen Trapp <juergen.trapp(a)alice.de> wrote: > lspci -nnvvxxx > […] Hello Jürgen! The last thing we heard from you was that you are trying to find and play with a write protection jumper. Did you succeed? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Support for ASRock 890GX Extreme3 mainboard
by Svetoslav Trochev 29 Feb '12

29 Feb '12

Hi Everybody, I am new here, so my apology if I am doing something wrong. I have ASRock 890GX Extreme3 mainboard. This board has ability to be flashed using standard BIOS, but never the less I decided to test Flashrom. I read the "Board Testing HOWTO" [1]. First signs are that this board will work out of the box with "flashrom v0.9.4-r1394 on Linux 3.0.4-pmagic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian" What I have done so far: 1. Ran 'flashrom' command and it detected the chip: Winbond W25Q80. 2. Ran 'flashrom -R xxxx.rom' and it completed with no errors. I examine the file and it looks like normal ROM file. 3. Ran 'flashrom -V' I am attaching the output. 4. I try comparing the backup copy of the EEPROM with the original file provided by ASRock. It is different. They have exact same header, but quite different. 5. Because I am not 100% sure that I have good backup I decided to order spare chip and continue with the test later. ( I have external EEPROM programmer ) I will continue this weekend. Thank you and any comments are welcome and highly appreciated, Svetoslav Trochev [1] http://www.flashrom.org/Board_Testing_HOWTO

1 0

Some specs for IT8518 buried in my laptops ESM
by Eric Appleman 28 Feb '12

28 Feb '12

http://www.mediafire.com/?t77ue8xx1cv49g9 Page 87 has a full blown schematic. Enjoy. - Eric

1 0

[PATCH] FT2232 programmer frequency divider parameter support
by Samir Ibradžić 28 Feb '12

28 Feb '12

Hello, I would like to submit a patch, that enables extra argument when using FT2232 external programmer, a frequency divider. For FT2232 programmer we have this divider set to 3 by default by DIVIDE_BY constant, which will result in 10MHz (H-chips) or 2MHz (non H-chips) SPI speeds. By providing divider as parameter, SPI interface frequency culd be overridden by user, resulting in different speeds (H-chip example): divider | freq ---------+-------- 1 | 30Mhz 2 | 15Mhz 3 | 10Mhz 4 | 7.5Mhz 5 | 6Mhz 6 | 5Mhz 15 | 2Mhz 30 | 1Mhz 60 | 0.5Mhz 600 | 0.05Mhz (and so on) These lower than default SPI speeds can be very useful when we have flawed flash chips that would not support 10Mhz or bad quality or too long cabling between programmer and the chip. Higher than default speeds might also be useful (if only flashrom AAI implementation was faster). Please note that this parameter is arbitrary integer, maybe only a value up to 255 would really make sense, but i can not be sure about that since it may be programmer hardware dependent. All values between 1-255 worked for me (PicoTAP programmer), as well as 300 & 600 (these resulted in extremely slow flash reads, as expected, 2MB flash that usually takes 16s to read @2-10Mhz, took more than 6 minutes @0.05Mhz). Others values i haven't tested. Signed-off-by: Samir Ibradžić <sibradzic(a)gmail.com> --- $ svn diff Index: ft2232_spi.c =================================================================== --- ft2232_spi.c (revision 1451) +++ ft2232_spi.c (working copy) @@ -168,6 +168,7 @@ enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; double mpsse_clk; + int divider = DIVIDE_BY; arg = extract_programmer_param("type"); if (arg) { @@ -237,6 +238,17 @@ } } free(arg); + arg = extract_programmer_param("divider"); + if (arg) { + if (isdigit(*arg) && (atoi(arg) > 0)) + divider = atoi(arg); + else { + msg_perr("Error: Invalid frequency divider specified.\n"); + free(arg); + return -2; + } + } + free(arg); msg_pdbg("Using device type %s %s ", get_ft2232_vendorname(ft2232_vid, ft2232_type), get_ft2232_devicename(ft2232_vid, ft2232_type)); @@ -298,16 +310,16 @@ msg_pdbg("Set clock divisor\n"); buf[0] = 0x86; /* command "set divisor" */ /* valueL/valueH are (desired_divisor - 1) */ - buf[1] = (DIVIDE_BY - 1) & 0xff; - buf[2] = ((DIVIDE_BY - 1) >> 8) & 0xff; + buf[1] = (divider - 1) & 0xff; + buf[2] = ((divider - 1) >> 8) & 0xff; if (send_buf(ftdic, buf, 3)) { ret = -6; goto ftdi_err; } msg_pdbg("MPSSE clock: %f MHz divisor: %d " - "SPI clock: %f MHz\n", mpsse_clk, DIVIDE_BY, - (double)(mpsse_clk / (((DIVIDE_BY - 1) + 1) * 2))); + "SPI clock: %f MHz\n", mpsse_clk, divider, + (double)(mpsse_clk / (((divider - 1) + 1) * 2))); /* Disconnect TDI/DO to TDO/DI for loopback. */ msg_pdbg("No loopback of TDI/DO TDO/DI\n"); -- R, S

2 2

Re: [flashrom] Test report Biostar M7VIQ - Chip not detected
by Carl-Daniel Hailfinger 27 Feb '12

27 Feb '12

Hi Gurken, Am 26.02.2012 22:46 schrieb Gurken Papst: > Winbond W49F002U flash chip is not detected on a Biostar M7VIQ. > Detection and reading flash works using UniFlash 1.40. Writing > untested. > > Output of flashrom -V: > flashrom v0.9.5-r1503 on Linux 2.6.39.3 (i686), built with libpci > 3.1.8, GCC 4.6.2, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 832M loops > per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1007 us, > 10000 myus = 10169 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: " " > DMI string system-product-name: " " > DMI string system-version: " " > DMI string baseboard-manufacturer: " " > DMI string baseboard-product-name: "KM266-8235" > DMI string baseboard-version: " " > DMI string chassis-type: "Desktop" > Found chipset "VIA VT8235" with PCI ID 1106:3177. Enabling flash write... OK. > The following protocols are supported: Non-SPI. > Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xd6, id2 > 0x52, id1 is normal flash content, id2 is normal flash content > [...] > > superiotool -dV: > [...] > Found Winbond W83697HF/F/HG (id=0x60, rev=0x12) at 0x2e > Register dump: > idx 20 21 22 23 24 25 26 28 29 2a > val 60 12 ff fe 10 00 00 00 00 f0 > def 60 NA ff 00 00 00 00 00 00 MM Register 0x24 says ROM size is 2 Mbit. Register 0x2a says flash translation is enabled. We should autodetect this Super I/O and set bit 3 in register 0x24 to enable detection and writing. > LDN 0x00 (Floppy) > idx 30 60 61 70 74 f0 f1 f2 f4 f5 > val 01 03 f0 06 02 0e 00 ff 00 00 > def 01 03 f0 06 02 0e 00 ff 00 00 We have a patch for this somewhere, but it is probably pretty bitrotted and needs to be updated. Would you be willing to test a few patches? Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] [PATCH 7/8] check if write enable is really set in nicintel_spi_init (and minor comment changes).
by Stefan Tauner 27 Feb '12

27 Feb '12

On Mon, 20 Feb 2012 19:49:06 +0100 Idwer Vollering <vidwer(a)gmail.com> wrote: > 2011/3/15 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > Adding "pci_mmio_writel(FLASH_WRITES_DISABLED, nicintel_spibar + > EECD);" right after the usage of register_shutdown() works as it > should: > > Initializing nicintel_spi programmer > Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:01.0). > Requested BAR is MEM, 32bit, not prefetchable > Enabling flash write access failed. > Error: Programmer initialization failed. > > Acked-by: Idwer Vollering <vidwer(a)gmail.com> thanks! committed in r1510 -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1510 - trunk
by repository service 27 Feb '12

27 Feb '12

Author: stefanct Date: Mon Feb 27 20:44:16 2012 New Revision: 1510 URL: http://flashrom.org/trac/flashrom/changeset/1510 Log: nicintel_spi.c: check if write enable is really set (and minor comment changes). Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer(a)gmail.com> Modified: trunk/nicintel_spi.c Modified: trunk/nicintel_spi.c ============================================================================== --- trunk/nicintel_spi.c Sun Feb 26 00:40:16 2012 (r1509) +++ trunk/nicintel_spi.c Mon Feb 27 20:44:16 2012 (r1510) @@ -31,12 +31,15 @@ #define PCI_VENDOR_ID_INTEL 0x8086 +/* EEPROM/Flash Control & Data Register */ #define EECD 0x10 +/* Flash Access Register */ #define FLA 0x1c /* * Register bits of EECD. - * + * Table 13-6 + * * Bit 04, 05: FWE (Flash Write Enable Control) * 00b = not allowed * 01b = flash writes disabled @@ -46,8 +49,9 @@ #define FLASH_WRITES_DISABLED 0x10 /* FWE: 10000b */ #define FLASH_WRITES_ENABLED 0x20 /* FWE: 100000b */ -/* Flash Access register bits */ -/* Table 13-9 */ +/* Flash Access register bits + * Table 13-9 + */ #define FL_SCK 0 #define FL_CS 1 #define FL_SI 2 @@ -179,6 +183,13 @@ tmp |= FLASH_WRITES_ENABLED; pci_mmio_writel(tmp, nicintel_spibar + EECD); + /* test if FWE is really set to allow writes */ + tmp = pci_mmio_readl(nicintel_spibar + EECD); + if ( (tmp & FLASH_WRITES_DISABLED) || !(tmp & FLASH_WRITES_ENABLED) ) { + msg_perr("Enabling flash write access failed.\n"); + return 1; + } + if (register_shutdown(nicintel_spi_shutdown, NULL)) return 1;

1 0

Re: [flashrom] flashrom with HP XW9300
by Carl-Daniel Hailfinger 27 Feb '12

27 Feb '12

Hi Jürgen, I remember a similar case where flashrom was unable to write, and that board also had a second chipset match. We might have the same issue here: To PCI devices with the same ID, one acts as southbridge and the other one is unused. We might enable the wrong one here and might have to refine detection a bit. OTOH, a flash chip is detected, so we know that write was enabled on the address space mapped to the flash chip (but that write enable might have not been done by flashrom). Am 26.02.2012 20:38 schrieb Jürgen Trapp: > ubuntu@ubuntu:~/coreboot$ sudo flashrom -VV > flashrom v0.9.5.1-r1508 on Linux 3.0.0-12-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 4001 usecs, 1093M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 8001 us, 16004 myus = 16001 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "Hewlett-Packard" > DMI string system-product-name: "HP xw9300 Workstation" > DMI string system-version: " " > DMI string baseboard-manufacturer: "Hewlett-Packard" > DMI string baseboard-product-name: "09C4h" > DMI string baseboard-version: "Not Specified" > DMI string chassis-type: "Mini Tower" > Found chipset "NVIDIA CK804" with PCI ID 10de:0051. Enabling flash write... OK. > WARNING: unexpected second chipset match: "NVIDIA CK804" Side note: We should print the PCI ID for the second chipset match as well. > ignoring, please report lspci and board URL to flashrom(a)flashrom.org > with 'CHIPSET: your board name' in the subject line. > The following protocols are supported: Non-SPI. > Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x65, id2 0xd0, id1 parity violation, id1 is normal flash content, id2 is normal flash content > [...] Could you run the following command as root and post the results? lspci -nnvvxxx That should help us determine which one of the CK804 southbridges we should enable. However, it is possible that we enabled the right southbridge due to pure luck and there is a separate write protection (jumper or solder bridge or something controllable in software). If that is the case, somebody has to find out how to enable writes by reverse engineering or by looking at the docs if the docs are good. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

send log from ASUS P8H61 PRO bios ver 0605
by Pavel Petrov 27 Feb '12

27 Feb '12

flashrom -r 1 -V flashrom v0.9.5.1-r1508 on Linux 3.0.0-16-generic-pae (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3585M loops per second, 10 myus = 10 us, 100 myus = 114 us, 1000 myus = 1013 us, 10000 myus = 10252 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8H61 PRO" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 ID of the mandatory JEDEC SFDP parameter table is not 0 as demanded by JESD216 (warning only). Parsing JEDEC flash parameter table... It seems like this chip supports the preliminary Intel version of SFDP, skipping processing of double words 3-9. done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x6f, id2 0xa7, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x28, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0xb776c8a0 Restoring MMIO space at 0xb776c89c Restoring MMIO space at 0xb776c898 Restoring MMIO space at 0xb776c896 Restoring MMIO space at 0xb776c894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Test report Biostar M7VIQ - Chip not detected
by Gurken Papst 26 Feb '12

26 Feb '12

Winbond W49F002U flash chip is not detected on a Biostar M7VIQ. Detection and reading flash works using UniFlash 1.40. Writing untested. Output of flashrom -V: flashrom v0.9.5-r1503 on Linux 2.6.39.3 (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 832M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1007 us, 10000 myus = 10169 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "KM266-8235" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "VIA VT8235" with PCI ID 1106:3177. Enabling flash write... OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xd6, id2 0x52, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x25, id2 0x5a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41 Output of lspci -nnvvxxx: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge [1106:3116] Subsystem: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge [1106:3116] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via 00: 06 11 16 31 06 00 30 22 00 00 00 06 00 08 00 00 10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 16 31 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 00 18 88 80 82 44 00 20 18 99 88 80 82 44 00 00 50: e0 00 00 02 c0 04 50 50 ee 00 20 40 50 50 50 50 60: 0a 2a 00 20 e6 99 02 2e de 0d 43 50 c4 05 00 00 70: 82 c8 00 01 01 01 10 00 01 00 00 00 00 00 02 12 80: 0f 61 00 00 c0 00 00 00 03 00 cd 35 00 00 00 00 90: 17 a3 6b ea 4f 1c 08 19 11 33 00 00 61 11 01 00 a0: 02 c0 20 00 07 02 00 1f 04 01 00 00 2f 02 04 00 b0: 78 ac 18 9b 80 00 00 00 88 00 00 00 00 00 20 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 1a 00 00 01 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 01 13 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 91 b0 07 01 30 22 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 20: 00 ec f0 ed 00 e0 f0 e7 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00 40: 81 c0 00 44 24 72 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 40: 40 10 07 00 00 00 00 00 00 0b 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 40: 40 10 07 00 00 00 00 00 00 0b 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: uhci_hcd 00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00 40: 40 10 03 00 00 00 00 00 00 0b 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 21 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: 06 11 04 31 17 00 10 02 82 20 03 0c 08 20 00 00 10: 00 00 00 ee 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31 30: 00 00 00 00 80 00 00 00 00 00 00 00 03 04 00 00 40: 00 00 03 00 00 00 00 00 a0 10 00 09 00 00 00 00 50: 00 5a 00 80 00 00 00 00 04 0b 88 88 53 88 00 00 60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 77 31 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 54 7f f8 0b 00 00 00 00 0c 20 00 00 04 00 0a 08 50: 81 1d 09 00 00 20 22 20 43 00 00 00 00 00 00 00 60: 00 00 f0 40 00 00 08 04 00 00 00 00 00 00 00 00 70: 06 11 77 31 00 00 00 00 00 00 00 00 20 00 00 00 80: 20 84 59 00 fa 10 00 00 01 40 00 00 da 00 00 00 90: 00 1f f9 88 a4 40 00 00 00 be 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at dc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_via 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 dc 00 00 00 00 00 00 00 00 00 00 06 11 71 05 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00 40: 0b f2 09 05 18 1c c0 00 20 20 99 99 ff 00 20 a8 50: e6 e6 17 17 0c 03 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 d0 dd 35 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50) Subsystem: VIA Technologies, Inc. K7VT2 motherboard [1106:4161] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at e000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA 82xx Audio 00: 06 11 59 30 01 00 10 02 50 00 01 04 00 00 00 00 10: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 61 41 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00 40: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74) Subsystem: Biostar Microtech Int'l Corp Device [1565:2200] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at e800 [size=256] Region 1: Memory at ee001000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine 00: 06 11 65 30 07 00 10 02 74 00 00 02 08 20 00 00 10: 01 e8 00 00 00 10 00 ee 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 00 22 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 08 40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev a1) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M] [virtual] Expansion ROM at ed000000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4 Kernel driver in use: nouveau 00: de 10 10 01 07 00 b0 02 a1 00 00 03 00 20 00 00 10: 00 00 00 ec 08 00 00 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01 40: 00 00 00 00 02 00 20 00 17 00 00 1f 04 01 00 1f 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Output of superiotool -deV: superiotool r5050 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x10fe, id=0x1260 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x6012, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83697HF/F/HG (id=0x60, rev=0x12) at 0x2e Register dump: idx 20 21 22 23 24 25 26 28 29 2a val 60 12 ff fe 10 00 00 00 00 f0 def 60 NA ff 00 00 00 00 00 00 MM LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 04 01 def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 00 def 01 02 f8 03 00 00 LDN 0x06 (Consumer IR) idx 30 60 61 70 val 00 00 00 00 def 00 00 00 00 LDN 0x07 (Game port, GPIO 1) idx 30 60 61 62 63 f0 f1 f2 val 01 02 01 00 00 ff 00 00 def 00 02 01 00 00 ff 00 00 LDN 0x08 (MIDI port, GPIO 5) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 val 01 03 30 00 00 0a ff 00 00 00 00 00 def 00 03 30 00 00 09 ff 00 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4) idx 30 60 61 f0 f1 f2 f3 f4 f5 f6 f7 f8 f5 val 00 00 00 ff ff ff ff ff ff ff ff ff ff def 00 00 00 ff 00 00 ff 00 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 val 01 00 00 00 ff 00 00 00 00 af 06 08 00 08 05 def 00 00 00 00 NA 00 00 00 00 00 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 val 01 02 90 00 def 00 00 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

1 0

flashrom with HP XW9300
by Jürgen Trapp 26 Feb '12

26 Feb '12

Hi, i have a problem with flash writing under HP XW9300. I will use coreboot.rom with the board and i have a error (see attachments: output_flashrom_write) Thank you for help. Jürgen

1 0

Re: [flashrom] [PATCH 1/2] revert flashctx to flashchip in block_eraser helper functions
by Carl-Daniel Hailfinger 26 Feb '12

26 Feb '12

Am 28.12.2011 01:57 schrieb Stefan Tauner: > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Sorry, Nack. Quoting from your other mail: > it is easier to "upcast" some flashctx > "objects" to flashchip (which is safe) AFAICS this violates the C standard. http://stackoverflow.com/questions/98650/what-is-the-strict-aliasing-rule The offending hunks are below: > diff --git a/flashrom.c b/flashrom.c > index f1a6165..68b6d97 100644 > --- a/flashrom.c > +++ b/flashrom.c > @@ -1313,7 +1313,7 @@ int erase_and_write_flash(struct flashctx *flash, uint8_t *oldcontents, > int k, ret = 1; > uint8_t *curcontents; > unsigned long size = flash->total_size * 1024; > - unsigned int usable_erasefunctions = count_usable_erasers(flash); > + unsigned int usable_erasefunctions = count_usable_erasers((struct flashchip*) flash); > > msg_cinfo("Erasing and writing flash chip... "); > curcontents = malloc(size); > @@ -1332,7 +1332,7 @@ int erase_and_write_flash(struct flashctx *flash, uint8_t *oldcontents, > break; > } > msg_cdbg("Trying erase function %i... ", k); > - if (check_block_eraser(flash, k, 1)) > + if (check_block_eraser((struct flashchip*) flash, k, 1)) > continue; > usable_erasefunctions--; > ret = walk_eraseregions(flash, k, &erase_and_write_block_helper, > @@ -1680,7 +1680,7 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, > int ret = 0; > unsigned long size = flash->total_size * 1024; > > - if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { > + if (chip_safety_check((struct flashchip*) flash, force, read_it, write_it, erase_it, verify_it)) { > msg_cerr("Aborting.\n"); > ret = 1; > goto out_nofree; -- http://www.hailfinger.org/

2 1

[PATCH] flashrom 0.9.5.1
by Carl-Daniel Hailfinger 26 Feb '12

26 Feb '12

Increase flashrom release number to 0.9.5.1 Informal ack by Stefan Tauner on IRC: 01:03 <stefanct> with the kfreebsd patch in, 0.9.5.1 is acked by me too in case i am not around tomorrow... Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Index: flashrom-0.9.5.1-release/Makefile =================================================================== --- flashrom-0.9.5.1-release/Makefile (Revision 1507) +++ flashrom-0.9.5.1-release/Makefile (Arbeitskopie) @@ -277,7 +277,7 @@ # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown) -RELEASE := 0.9.5 +RELEASE := 0.9.5.1 VERSION := $(RELEASE)-r$(SVNVERSION) RELEASENAME ?= $(VERSION) -- http://www.hailfinger.org/

1 1

[commit] r1509 - tags/flashrom-0.9.5.1
by repository service 26 Feb '12

26 Feb '12

Author: hailfinger Date: Sun Feb 26 00:40:16 2012 New Revision: 1509 URL: http://flashrom.org/trac/flashrom/changeset/1509 Log: Tag flashrom 0.9.5.1 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Added: tags/flashrom-0.9.5.1/ - copied from r1508, trunk/

1 0

[commit] r1508 - trunk
by repository service 26 Feb '12

26 Feb '12

Author: hailfinger Date: Sun Feb 26 00:39:29 2012 New Revision: 1508 URL: http://flashrom.org/trac/flashrom/changeset/1508 Log: Increase flashrom release number to 0.9.5.1 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Feb 25 23:50:21 2012 (r1507) +++ trunk/Makefile Sun Feb 26 00:39:29 2012 (r1508) @@ -277,7 +277,7 @@ # will not require subversion. The downloadable snapshots are already exported. SVNVERSION := $(shell LC_ALL=C svnversion -cn . 2>/dev/null | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || LC_ALL=C git svn info . 2>/dev/null | awk '/^Revision:/ {print $$2 }' | grep "[0-9]" || echo unknown) -RELEASE := 0.9.5 +RELEASE := 0.9.5.1 VERSION := $(RELEASE)-r$(SVNVERSION) RELEASENAME ?= $(VERSION)

1 0

[PATCH] Support Debian/kFreeBSD
by Carl-Daniel Hailfinger 25 Feb '12

25 Feb '12

Apparently compilation worked before I introduced the target OS check during compilation, but it seems the generated binaries back then might have been incorrect for Debian/kFreeBSD. This stuff should compile and run well. Output of flashrom -V on a desktop PC (not a laptop) would be appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-kfreebsd_glibc/hwaccess.c =================================================================== --- flashrom-kfreebsd_glibc/hwaccess.c (Revision 1504) +++ flashrom-kfreebsd_glibc/hwaccess.c (Arbeitskopie) @@ -40,7 +40,7 @@ { } -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) int io_fd; #endif @@ -52,7 +52,7 @@ #else #if defined (__sun) && (defined(__i386) || defined(__amd64)) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif defined(__FreeBSD__) || defined (__DragonFly__) +#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined (__DragonFly__) if ((io_fd = open("/dev/io", O_RDWR)) < 0) { #else if (iopl(3) != 0) { @@ -71,7 +71,7 @@ void release_io_perms(void) { -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) close(io_fd); #endif } Index: flashrom-kfreebsd_glibc/hwaccess.h =================================================================== --- flashrom-kfreebsd_glibc/hwaccess.h (Revision 1504) +++ flashrom-kfreebsd_glibc/hwaccess.h (Arbeitskopie) @@ -189,6 +189,7 @@ */ #if defined(__FreeBSD__) || defined(__DragonFly__) + /* Note that FreeBSD kernel with glibc does not have machine/cpufunc.h. */ #include <machine/cpufunc.h> #define off64_t off_t #define lseek64 lseek @@ -228,7 +229,7 @@ #define INL inportl #else - + /* This is the usual glibc interface. */ #define OUTB outb #define OUTW outw #define OUTL outl @@ -299,12 +300,12 @@ #endif #endif -#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) +#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); int wrmsr(int addr, msr_t msr); #endif -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) /* FreeBSD already has conflicting definitions for wrmsr/rdmsr. */ #undef rdmsr #undef wrmsr Index: flashrom-kfreebsd_glibc/os.h =================================================================== --- flashrom-kfreebsd_glibc/os.h (Revision 1504) +++ flashrom-kfreebsd_glibc/os.h (Arbeitskopie) @@ -30,6 +30,9 @@ // FreeBSD #elif defined(__FreeBSD__) #define __FLASHROM_OS__ "FreeBSD" +// FreeBSD with glibc-based userspace (e.g. Debian/kFreeBSD) +#elif defined(__FreeBSD_kernel__) && defined(__GLIBC__) +#define __FLASHROM_OS__ "FreeBSD-glibc" // DragonFlyBSD #elif defined(__DragonFly__) #define __FLASHROM_OS__ "DragonFlyBSD" Index: flashrom-kfreebsd_glibc/physmap.c =================================================================== --- flashrom-kfreebsd_glibc/physmap.c (Revision 1504) +++ flashrom-kfreebsd_glibc/physmap.c (Arbeitskopie) @@ -382,7 +382,7 @@ fd_msr = -1; } #else -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) #include <sys/ioctl.h> typedef struct { -- http://www.hailfinger.org/

1 1

[commit] r1507 - trunk
by repository service 25 Feb '12

25 Feb '12

Author: hailfinger Date: Sat Feb 25 23:50:21 2012 New Revision: 1507 URL: http://flashrom.org/trac/flashrom/changeset/1507 Log: Support Debian/kFreeBSD Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested-by: Robert Millan <rmh(a)debian.org> Tested-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/hwaccess.c trunk/hwaccess.h trunk/os.h trunk/physmap.c Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Sat Feb 25 00:49:30 2012 (r1506) +++ trunk/hwaccess.c Sat Feb 25 23:50:21 2012 (r1507) @@ -40,7 +40,7 @@ { } -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) int io_fd; #endif @@ -52,7 +52,7 @@ #else #if defined (__sun) && (defined(__i386) || defined(__amd64)) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif defined(__FreeBSD__) || defined (__DragonFly__) +#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined (__DragonFly__) if ((io_fd = open("/dev/io", O_RDWR)) < 0) { #else if (iopl(3) != 0) { @@ -71,7 +71,7 @@ void release_io_perms(void) { -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) close(io_fd); #endif } Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Sat Feb 25 00:49:30 2012 (r1506) +++ trunk/hwaccess.h Sat Feb 25 23:50:21 2012 (r1507) @@ -189,6 +189,10 @@ */ #if defined(__FreeBSD__) || defined(__DragonFly__) + /* Note that Debian/kFreeBSD (FreeBSD kernel with glibc) has conflicting + * out[bwl] definitions in machine/cpufunc.h and sys/io.h at least in some + * versions. Use machine/cpufunc.h only for plain FreeBSD/DragonFlyBSD. + */ #include <machine/cpufunc.h> #define off64_t off_t #define lseek64 lseek @@ -228,7 +232,7 @@ #define INL inportl #else - + /* This is the usual glibc interface. */ #define OUTB outb #define OUTW outw #define OUTL outl @@ -299,12 +303,12 @@ #endif #endif -#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) +#if !defined(__DARWIN__) && !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__) && !defined(__DragonFly__) && !defined(__LIBPAYLOAD__) typedef struct { uint32_t hi, lo; } msr_t; msr_t rdmsr(int addr); int wrmsr(int addr, msr_t msr); #endif -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) /* FreeBSD already has conflicting definitions for wrmsr/rdmsr. */ #undef rdmsr #undef wrmsr Modified: trunk/os.h ============================================================================== --- trunk/os.h Sat Feb 25 00:49:30 2012 (r1506) +++ trunk/os.h Sat Feb 25 23:50:21 2012 (r1507) @@ -30,6 +30,9 @@ // FreeBSD #elif defined(__FreeBSD__) #define __FLASHROM_OS__ "FreeBSD" +// FreeBSD with glibc-based userspace (e.g. Debian/kFreeBSD) +#elif defined(__FreeBSD_kernel__) && defined(__GLIBC__) +#define __FLASHROM_OS__ "FreeBSD-glibc" // DragonFlyBSD #elif defined(__DragonFly__) #define __FLASHROM_OS__ "DragonFlyBSD" Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Sat Feb 25 00:49:30 2012 (r1506) +++ trunk/physmap.c Sat Feb 25 23:50:21 2012 (r1507) @@ -382,7 +382,7 @@ fd_msr = -1; } #else -#if defined(__FreeBSD__) || defined(__DragonFly__) +#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) #include <sys/ioctl.h> typedef struct {

1 0

[PATCH] Postpone layout file reading
by Carl-Daniel Hailfinger 25 Feb '12

25 Feb '12

Layout file reading should happen after option parsing like all other file accesses. Guard against multiple --layout parameters. Side note: This fixes an inconsistency which impacts the log file patch. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-postpone_layoutfile_reading/cli_classic.c =================================================================== --- flashrom-postpone_layoutfile_reading/cli_classic.c (Revision 1482) +++ flashrom-postpone_layoutfile_reading/cli_classic.c (Arbeitskopie) @@ -204,6 +204,7 @@ }; char *filename = NULL; + char *layoutfile = NULL; char *tempstr = NULL; char *pparam = NULL; @@ -290,9 +291,12 @@ force = 1; break; case 'l': - tempstr = strdup(optarg); - if (read_romlayout(tempstr)) + if (layoutfile) { + fprintf(stderr, "Error: --layout specified " + "more than once. Aborting.\n"); cli_classic_abort_usage(); + } + layoutfile = strdup(optarg); break; case 'i': tempstr = strdup(optarg); @@ -390,9 +394,6 @@ cli_classic_abort_usage(); } - if (process_include_args()) - cli_classic_abort_usage(); - /* FIXME: Print the actions flashrom will take. */ if (list_supported) { @@ -407,6 +408,11 @@ } #endif + if (layoutfile && read_romlayout(layoutfile)) + cli_classic_abort_usage(); + if (process_include_args()) + cli_classic_abort_usage(); + /* Does a chip with the requested name exist in the flashchips array? */ if (chip_to_probe) { for (flash = flashchips; flash && flash->name; flash++) -- http://www.hailfinger.org/

2 6

[PATCH 5/5] squash! print_wiki.c fix columns calculations
by Stefan Tauner 25 Feb '12

25 Feb '12

- chips Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- print_wiki.c | 30 ++++++++++++++++++------------ 1 files changed, 18 insertions(+), 12 deletions(-) diff --git a/print_wiki.c b/print_wiki.c index d55563c..43fab47 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -224,6 +224,7 @@ static void print_supported_chips_wiki(int cols) { int i = 0, c = 1, chipcount = 0; const struct flashchip *f, *old = NULL; + unsigned int lines_per_col; uint32_t t; char *s; char vmax[6]; @@ -238,21 +239,28 @@ static void print_supported_chips_wiki(int cols) chipcount++; } + /* +1 to force the resulting number of columns to be < cols */ + lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0); + printf("\n== Supported chips ==\n\nTotal amount of supported " - "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n" - "| valign=\"top\"|\n\n%s", chipcount, chip_th); + "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n", + chipcount); - for (f = flashchips; f->name != NULL; f++, i++) { + for (f = flashchips; f->name != NULL; f++) { /* Don't print generic entries. */ if (!strncmp(f->vendor, "Unknown", 7) || !strncmp(f->vendor, "Programmer", 10) || !strncmp(f->name, "unknown", 7)) continue; + if ((i % lines_per_col) == 0) + printf("| valign=\"top\"|\n\n%s", chip_th); + /* Alternate colors if the vendor changes. */ if (old != NULL && strcmp(old->vendor, f->vendor)) c = !c; + old = f; t = f->tested; s = flashbuses_to_text(f->bustype); sprintf(vmin, "%0.03f", f->voltage.min / (double)1000); @@ -276,16 +284,14 @@ static void print_supported_chips_wiki(int cols) f->voltage.min ? vmax : "N/A"); free(s); - /* Split table into 'cols' columns. */ - if (i >= (chipcount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th); - i = 0; - } - - old = f; + if (((i % lines_per_col) + 1) == lines_per_col) + printf("\n|}\n\n"); + i++; } - - printf("\n|}\n\n|}\n"); + /* end inner table if it did not fill the last column fully */ + if (((i % lines_per_col)) > 0) + printf("\n|}\n\n"); + printf("|}\n\n"); } /* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */ -- 1.7.1

1 0

[PATCH 4/5] squash! print_wiki.c fix columns calculations
by Stefan Tauner 25 Feb '12

25 Feb '12

- boards Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- print_wiki.c | 26 ++++++++++++++++---------- 1 files changed, 16 insertions(+), 10 deletions(-) diff --git a/print_wiki.c b/print_wiki.c index e0b5ff3..d55563c 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -134,11 +134,12 @@ static void print_supported_chipsets_wiki(int cols) static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) { - int i, j, k = 0, color = 1; + int i, k = 0, color = 1; int num_notes = 0; char *notes = calloc(1, 1); const struct board_match *b = board_matches; unsigned int boardcount = 0, boardcount_good = 0, boardcount_bad = 0; + unsigned int lines_per_col; char tmp[900 + 1]; for (i = 0; boards[i].vendor != NULL; i++) { @@ -149,12 +150,17 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols, boardcount++; } + /* +1 to force the resulting number of columns to be < cols */ + lines_per_col = boardcount / cols + ((boardcount%cols) > 0 ? 1 : 0); + printf("\n\nTotal amount of supported %s: '''%d'''. " "Not yet supported (i.e., known-bad): '''%d'''.\n\n" - "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s", - devicetype, boardcount_good, boardcount_bad, board_th); + "{| border=\"0\" valign=\"top\"\n", + devicetype, boardcount_good, boardcount_bad); - for (i = 0, j = 0; boards[i].vendor != NULL; i++, j++) { + for (i = 0; boards[i].vendor != NULL; i++) { + if ((i % lines_per_col) == 0) + printf("| valign=\"top\"|\n\n%s", board_th); /* Alternate colors if the vendor changes. */ if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor)) @@ -190,14 +196,14 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols, printf("\n"); } - /* Split table in 'cols' columns. */ - if (j >= (boardcount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th); - j = 0; - } + if (((i % lines_per_col) + 1) == lines_per_col) + printf("\n|}\n\n"); } - printf("\n|}\n\n|}\n"); + /* end inner table if it did not fill the last column fully */ + if (((i % lines_per_col)) > 0) + printf("\n|}\n\n"); + printf("\n\n|}\n"); if (num_notes > 0) printf("\n\n%s\n", notes); -- 1.7.1

1 0

[PATCH 3/5] print_wiki.c fix columns calculations
by Stefan Tauner 25 Feb '12

25 Feb '12

for - chipsets --- i noticed that the chipset columns were not uniformly divided at all and looked at the code in more detail... out came this series of patches that changes all three major sections of the wiki page similarly (hopefully to the better) and it split respectively for easier reviewing. getting this right is not trivial due to the possible corner cases... and it makes one cry when aware of real programming languages ;) Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- print_wiki.c | 36 +++++++++++++++++++++++------------- 1 files changed, 23 insertions(+), 13 deletions(-) diff --git a/print_wiki.c b/print_wiki.c index 756f8d4..e0b5ff3 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -91,18 +91,26 @@ wrong (a working backup flash chip and/or good soldering skills).\n</div>\n"; static void print_supported_chipsets_wiki(int cols) { - int i, j, enablescount = 0, color = 1; + int enablescount = 0, color = 1; + int i; + unsigned int lines_per_col; const struct penable *e; for (e = chipset_enables; e->vendor_name != NULL; e++) enablescount++; + /* +1 to force the resulting number of columns to be < cols */ + lines_per_col = enablescount / cols + ((enablescount%cols) > 0 ? 1 : 0); + printf("\n== Supported chipsets ==\n\nTotal amount of supported " - "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n| " - "valign=\"top\"|\n\n%s", enablescount, chipset_th); + "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n", + enablescount); e = chipset_enables; - for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) { + for (i = 0; e[i].vendor_name != NULL; i++) { + if ((i % lines_per_col) == 0) + printf("| valign=\"top\"|\n\n%s", chipset_th); + /* Alternate colors if the vendor changes. */ if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name)) color = !color; @@ -113,30 +121,32 @@ static void print_supported_chipsets_wiki(int cols) e[i].vendor_id, e[i].device_id, (e[i].status == OK) ? "{{OK}}" : "{{?3}}"); - /* Split table in 'cols' columns. */ - if (j >= (enablescount / cols + 1)) { - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th); - j = 0; - } + if (((i % lines_per_col) + 1) == lines_per_col) + printf("\n|}\n\n"); } - printf("\n|}\n\n|}\n"); + /* end inner table if it did not fill the last column fully */ + if (((i % lines_per_col)) > 0) + printf("\n|}\n\n"); + printf("\n\n|}\n"); } static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) { - int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1; + int i, j, k = 0, color = 1; int num_notes = 0; char *notes = calloc(1, 1); - char tmp[900 + 1]; const struct board_match *b = board_matches; + unsigned int boardcount = 0, boardcount_good = 0, boardcount_bad = 0; + char tmp[900 + 1]; for (i = 0; boards[i].vendor != NULL; i++) { if (boards[i].working == OK) boardcount_good++; if (boards[i].working == BAD) boardcount_bad++; + boardcount++; } printf("\n\nTotal amount of supported %s: '''%d'''. " @@ -181,7 +191,7 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols, } /* Split table in 'cols' columns. */ - if (j >= ((boardcount_good + boardcount_bad) / cols + 1)) { + if (j >= (boardcount / cols + 1)) { printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th); j = 0; } -- 1.7.1

1 0

[PATCH 2/5] Refactor PCI and USB device status printing
by Stefan Tauner 25 Feb '12

25 Feb '12

To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devices (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashrom.c | 43 ++++++++++++++++++ ft2232_spi.c | 13 ------ pcidev.c | 1 - print.c | 135 +++++++++++++++++---------------------------------------- print_wiki.c | 136 +++++++++++++++++++++++++++++++++++++++------------------- programmer.h | 12 +++++ 6 files changed, 187 insertions(+), 153 deletions(-) diff --git a/flashrom.c b/flashrom.c index cad043b..bf1e157 100644 --- a/flashrom.c +++ b/flashrom.c @@ -62,6 +62,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_INTERNAL == 1 { .name = "internal", + .type = OTHER, + .devices.note = NULL, .init = internal_init, .map_flash_region = physmap, .unmap_flash_region = physunmap, @@ -72,6 +74,9 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_DUMMY == 1 { .name = "dummy", + .type = OTHER, + /* FIXME */ + .devices.note = "Dummy device, does nothing and logs all accesses\n", .init = dummy_init, .map_flash_region = dummy_map, .unmap_flash_region = dummy_unmap, @@ -82,6 +87,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_NIC3COM == 1 { .name = "nic3com", + .type = PCI, + .devices.pci = nics_3com, .init = nic3com_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -93,6 +100,8 @@ const struct programmer_entry programmer_table[] = { { /* This programmer works for Realtek RTL8139 and SMC 1211. */ .name = "nicrealtek", + .type = PCI, + .devices.pci = nics_realtek, //.name = "nicsmc1211", .init = nicrealtek_init, .map_flash_region = fallback_map, @@ -104,6 +113,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_NICNATSEMI == 1 { .name = "nicnatsemi", + .type = PCI, + .devices.pci = nics_natsemi, .init = nicnatsemi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -114,6 +125,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_GFXNVIDIA == 1 { .name = "gfxnvidia", + .type = PCI, + .devices.pci = gfx_nvidia, .init = gfxnvidia_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -124,6 +137,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_DRKAISER == 1 { .name = "drkaiser", + .type = PCI, + .devices.pci = drkaiser_pcidev, .init = drkaiser_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -134,6 +149,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_SATASII == 1 { .name = "satasii", + .type = PCI, + .devices.pci = satas_sii, .init = satasii_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -144,6 +161,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_ATAHPT == 1 { .name = "atahpt", + .type = PCI, + .devices.pci = ata_hpt, .init = atahpt_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -154,6 +173,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_FT2232_SPI == 1 { .name = "ft2232_spi", + .type = USB, + .devices.usb = devs_ft2232spi, .init = ft2232_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -164,6 +185,9 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_SERPROG == 1 { .name = "serprog", + .type = OTHER, + /* FIXME */ + .devices.note = "All programmer devices speaking the serprog protocol\n", .init = serprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -174,6 +198,9 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_BUSPIRATE_SPI == 1 { .name = "buspirate_spi", + .type = OTHER, + /* FIXME */ + .devices.note = "Dangerous Prototypes Bus Pirate\n", .init = buspirate_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -184,6 +211,9 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_DEDIPROG == 1 { .name = "dediprog", + .type = OTHER, + /* FIXME */ + .devices.note = "Dediprog SF100\n", .init = dediprog_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -194,6 +224,9 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_RAYER_SPI == 1 { .name = "rayer_spi", + .type = OTHER, + /* FIXME */ + .devices.note = "RayeR parallel port programmer\n", .init = rayer_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -204,6 +237,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_NICINTEL == 1 { .name = "nicintel", + .type = PCI, + .devices.pci = nics_intel, .init = nicintel_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -214,6 +249,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_NICINTEL_SPI == 1 { .name = "nicintel_spi", + .type = PCI, + .devices.pci = nics_intel_spi, .init = nicintel_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -224,6 +261,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_OGP_SPI == 1 { .name = "ogp_spi", + .type = PCI, + .devices.pci = ogp_spi, .init = ogp_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -234,6 +273,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_SATAMV == 1 { .name = "satamv", + .type = PCI, + .devices.pci = satas_mv, .init = satamv_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, @@ -244,6 +285,8 @@ const struct programmer_entry programmer_table[] = { #if CONFIG_LINUX_SPI == 1 { .name = "linux_spi", + .type = OTHER, + .devices.note = "Device files /dev/spidev*.*\n", .init = linux_spi_init, .map_flash_region = fallback_map, .unmap_flash_region = fallback_unmap, diff --git a/ft2232_spi.c b/ft2232_spi.c index 122866f..ec4934e 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -435,17 +435,4 @@ static int ft2232_spi_send_command(struct flashctx *flash, return failed ? -1 : 0; } -void print_supported_usbdevs(const struct usbdev_status *devs) -{ - int i; - - msg_pinfo("USB devices:\n"); - for (i = 0; devs[i].vendor_name != NULL; i++) { - msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name, - devs[i].device_name, devs[i].vendor_id, - devs[i].device_id, - (devs[i].status == NT) ? " (untested)" : ""); - } -} - #endif diff --git a/pcidev.c b/pcidev.c index e8b4dc1..6e5d0f1 100644 --- a/pcidev.c +++ b/pcidev.c @@ -244,7 +244,6 @@ void print_supported_pcidevs(const struct pcidev_status *devs) { int i; - msg_pinfo("PCI devices:\n"); for (i = 0; devs[i].vendor_name != NULL; i++) { msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name, devs[i].device_name, devs[i].vendor_id, diff --git a/print.c b/print.c index 544a846..8bab8e3 100644 --- a/print.c +++ b/print.c @@ -422,8 +422,24 @@ static void print_supported_boards_helper(const struct board_info *boards, } #endif +#if CONFIG_FT2232_SPI == 1 +void print_supported_usbdevs(const struct usbdev_status *devs) +{ + int i; + + msg_pinfo("USB devices:\n"); + for (i = 0; devs[i].vendor_name != NULL; i++) { + msg_pinfo("%s %s [%04x:%04x]%s\n", devs[i].vendor_name, + devs[i].device_name, devs[i].vendor_id, + devs[i].device_id, + (devs[i].status == NT) ? " (untested)" : ""); + } +} +#endif + void print_supported(void) { + unsigned int i; print_supported_chips(); msg_ginfo("\nSupported programmers:\n"); @@ -437,101 +453,30 @@ void print_supported(void) msg_ginfo("\n"); print_supported_boards_helper(laptops_known, "laptops"); #endif -#if CONFIG_DUMMY == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_DUMMY].name); - /* FIXME */ - msg_ginfo("Dummy device, does nothing and logs all accesses\n"); -#endif -#if CONFIG_NIC3COM == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_NIC3COM].name); - print_supported_pcidevs(nics_3com); -#endif -#if CONFIG_NICREALTEK == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_NICREALTEK].name); - print_supported_pcidevs(nics_realtek); -#endif -#if CONFIG_NICNATSEMI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_NICNATSEMI].name); - print_supported_pcidevs(nics_natsemi); -#endif -#if CONFIG_GFXNVIDIA == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_GFXNVIDIA].name); - print_supported_pcidevs(gfx_nvidia); -#endif -#if CONFIG_DRKAISER == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_DRKAISER].name); - print_supported_pcidevs(drkaiser_pcidev); -#endif -#if CONFIG_SATASII == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_SATASII].name); - print_supported_pcidevs(satas_sii); -#endif -#if CONFIG_ATAHPT == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_ATAHPT].name); - print_supported_pcidevs(ata_hpt); -#endif -#if CONFIG_FT2232_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_FT2232_SPI].name); - print_supported_usbdevs(devs_ft2232spi); -#endif -#if CONFIG_SERPROG == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_SERPROG].name); - /* FIXME */ - msg_ginfo("All programmer devices speaking the serprog protocol\n"); -#endif -#if CONFIG_BUSPIRATE_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_BUSPIRATE_SPI].name); - /* FIXME */ - msg_ginfo("Dangerous Prototypes Bus Pirate\n"); -#endif -#if CONFIG_DEDIPROG == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_DEDIPROG].name); - /* FIXME */ - msg_ginfo("Dediprog SF100\n"); -#endif -#if CONFIG_RAYER_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_RAYER_SPI].name); - /* FIXME */ - msg_ginfo("RayeR parallel port programmer\n"); -#endif -#if CONFIG_NICINTEL == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_NICINTEL].name); - print_supported_pcidevs(nics_intel); -#endif -#if CONFIG_NICINTEL_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_NICINTEL_SPI].name); - print_supported_pcidevs(nics_intel_spi); -#endif -#if CONFIG_OGP_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_OGP_SPI].name); - print_supported_pcidevs(ogp_spi); -#endif -#if CONFIG_SATAMV == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_SATAMV].name); - print_supported_pcidevs(satas_mv); -#endif -#if CONFIG_LINUX_SPI == 1 - msg_ginfo("\nSupported devices for the %s programmer:\n", - programmer_table[PROGRAMMER_LINUX_SPI].name); - msg_ginfo("Device files /dev/spidev*.*\n"); -#endif + for (i = 0; i < PROGRAMMER_INVALID; i++) { + const struct programmer_entry prog = programmer_table[i]; + switch (prog.type) { + case USB: + msg_ginfo("\nSupported USB devices for the %s programmer:\n", + prog.name); + print_supported_usbdevs(prog.devices.usb); + break; + case PCI: + msg_ginfo("\nSupported PCI devices for the %s programmer:\n", + prog.name); + print_supported_pcidevs(prog.devices.pci); + break; + case OTHER: + if (prog.devices.note == NULL) + break; + msg_ginfo("\nSupported devices for the %s programmer:\n", + prog.name); + msg_ginfo("%s", prog.devices.note); + break; + default: + break; + } + } } #if CONFIG_INTERNAL == 1 diff --git a/print_wiki.c b/print_wiki.c index 9a9cd83..756f8d4 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -72,12 +72,9 @@ static const char chip_th[] = "{\ | Probe\n| Read\n| Erase\n| Write\n\ | align=\"center\" | Min \n| align=\"center\" | Max\n\n"; -static const char programmer_section[] = "\ -\n== Supported programmers ==\n\nThis is a list \ -of supported PCI devices flashrom can use as programmer:\n\n{| border=\"0\" \ -valign=\"top\"\n| valign=\"top\"|\n\n{| border=\"0\" style=\"font-size: \ +static const char programmer_th[] = "{| border=\"0\" style=\"font-size: \ smaller\" valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\ -! align=\"left\" | Device\n! align=\"center\" | PCI IDs\n\ +! align=\"left\" | Device\n! align=\"center\" | IDs\n\ ! align=\"center\" | Status\n\n"; #if CONFIG_INTERNAL == 1 @@ -126,7 +123,7 @@ static void print_supported_chipsets_wiki(int cols) printf("\n|}\n\n|}\n"); } -static void wiki_helper(const char *devicetype, int cols, +static void print_supported_boards_wiki_helper(const char *devicetype, int cols, const struct board_info boards[]) { int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1; @@ -200,10 +197,10 @@ static void wiki_helper(const char *devicetype, int cols, static void print_supported_boards_wiki(void) { printf("%s", board_intro); - wiki_helper("boards", 2, boards_known); + print_supported_boards_wiki_helper("boards", 2, boards_known); printf("%s", laptop_intro); - wiki_helper("laptops", 1, laptops_known); + print_supported_boards_wiki_helper("laptops", 1, laptops_known); } #endif @@ -277,7 +274,16 @@ static void print_supported_chips_wiki(int cols) /* Not needed for CONFIG_INTERNAL, but for all other PCI-based programmers. */ #if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_NICINTEL+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV >= 1 -static void print_supported_pcidevs_wiki(const struct pcidev_status *devs) +static int count_supported_pcidevs_wiki(const struct pcidev_status *devs) +{ + unsigned int count = 0; + unsigned int i = 0; + for (i = 0; devs[i].vendor_name != NULL; i++) + count++; + return count; +} + +static void print_supported_pcidevs_wiki_helper(const struct pcidev_status *devs) { int i = 0; static int c = 0; @@ -295,6 +301,82 @@ static void print_supported_pcidevs_wiki(const struct pcidev_status *devs) } #endif +static int count_supported_usbdevs_wiki(const struct usbdev_status *devs) +{ + unsigned int count = 0; + unsigned int i = 0; + for (i = 0; devs[i].vendor_name != NULL; i++) + count++; + return count; +} + +static void print_supported_usbdevs_wiki_helper(const struct usbdev_status *devs) +{ + int i = 0; + static int c = 0; + + /* Alternate colors if the vendor changes. */ + c = !c; + + for (i = 0; devs[i].vendor_name != NULL; i++) { + printf("|- bgcolor=\"#%s\"\n| %s || %s || " + "%04x:%04x || {{%s}}\n", (c) ? "eeeeee" : "dddddd", + devs[i].vendor_name, devs[i].device_name, + devs[i].vendor_id, devs[i].device_id, + (devs[i].status == NT) ? "?3" : "OK"); + } +} + +static void print_supported_devs_wiki() +{ + unsigned int pci_count = 0; + unsigned int usb_count = 0; + unsigned int i; + + for (i = 0; i < PROGRAMMER_INVALID; i++) { + const struct programmer_entry prog = programmer_table[i]; + switch (prog.type) { + case USB: + usb_count += count_supported_usbdevs_wiki(prog.devices.usb); + break; + case PCI: + pci_count += count_supported_pcidevs_wiki(prog.devices.pci); + break; + case OTHER: + default: + break; + } + } + + printf("\n== PCI Devices ==\n\n" + "Total amount of supported PCI devices flashrom can use as a programmer: '''%d'''\n\n" + "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n", + pci_count); + printf("%s", programmer_th); + + for (i = 0; i < PROGRAMMER_INVALID; i++) { + const struct programmer_entry prog = programmer_table[i]; + if (prog.type == PCI) { + print_supported_pcidevs_wiki_helper(prog.devices.pci); + } + } + printf("\n|}\n"); + + printf("\n== USB Devices ==\n\n" + "Total amount of supported USB devices flashrom can use as a programmer: '''%d'''\n\n" + "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n", + usb_count); + printf("%s", programmer_th); + + for (i = 0; i < PROGRAMMER_INVALID; i++) { + const struct programmer_entry prog = programmer_table[i]; + if (prog.type == USB) { + print_supported_usbdevs_wiki_helper(prog.devices.usb); + } + } + printf("\n|}\n"); +} + void print_supported_wiki(void) { time_t t = time(NULL); @@ -305,40 +387,6 @@ void print_supported_wiki(void) print_supported_chipsets_wiki(3); print_supported_boards_wiki(); #endif - printf("%s", programmer_section); -#if CONFIG_NIC3COM == 1 - print_supported_pcidevs_wiki(nics_3com); -#endif -#if CONFIG_NICREALTEK == 1 - print_supported_pcidevs_wiki(nics_realtek); -#endif -#if CONFIG_NICNATSEMI == 1 - print_supported_pcidevs_wiki(nics_natsemi); -#endif -#if CONFIG_GFXNVIDIA == 1 - print_supported_pcidevs_wiki(gfx_nvidia); -#endif -#if CONFIG_DRKAISER == 1 - print_supported_pcidevs_wiki(drkaiser_pcidev); -#endif -#if CONFIG_SATASII == 1 - print_supported_pcidevs_wiki(satas_sii); -#endif -#if CONFIG_ATAHPT == 1 - print_supported_pcidevs_wiki(ata_hpt); -#endif -#if CONFIG_NICINTEL == 1 - print_supported_pcidevs_wiki(nics_intel); -#endif -#if CONFIG_NICINTEL_SPI == 1 - print_supported_pcidevs_wiki(nics_intel_spi); -#endif -#if CONFIG_OGP_SPI == 1 - print_supported_pcidevs_wiki(ogp_spi); -#endif -#if CONFIG_SATAMV == 1 - print_supported_pcidevs_wiki(satas_mv); -#endif - printf("\n|}\n"); + print_supported_devs_wiki(); } diff --git a/programmer.h b/programmer.h index a074662..976a44d 100644 --- a/programmer.h +++ b/programmer.h @@ -87,9 +87,21 @@ enum programmer { PROGRAMMER_INVALID /* This must always be the last entry. */ }; +enum programmer_type { + PCI, + USB, + OTHER, +}; + struct programmer_entry { const char *vendor; const char *name; + enum programmer_type type; + union { + const struct pcidev_status *const pci; + const struct usbdev_status *const usb; + const char * const note; + } devices; int (*init) (void); -- 1.7.1

1 0

[PATCH 1/5] Introduce and use enum test_state
by Stefan Tauner 25 Feb '12

25 Feb '12

Previously boards in the wiki were tagged either as working or as known bad. But we added support to various boards via board enables that were then never tested because the owners have not reported back. This can now be tagged with NT and is shown appropriately. Also, the underlying data structure indicating state was converted from macros to an enum while preserving original integer values. Because all lines specifying supported boards and laptops were touched anyway, this patch also re-indents them. --- TODO: change other occurrences to use it. wanted to get feedack first. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flash.h | 7 +- print.c | 869 +++++++++++++++++++++++++++++----------------------------- print_wiki.c | 7 +- programmer.h | 6 +- 4 files changed, 446 insertions(+), 443 deletions(-) diff --git a/flash.h b/flash.h index 0dac13d..4d0d79b 100644 --- a/flash.h +++ b/flash.h @@ -251,8 +251,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, i int read_buf_from_file(unsigned char *buf, unsigned long size, const char *filename); int write_buf_to_file(unsigned char *buf, unsigned long size, const char *filename); -#define OK 0 -#define NT 1 /* Not tested */ +enum test_state { + OK = 0, + NT = 1, /* Not tested */ + BAD +}; /* Something happened that shouldn't happen, but we can go on. */ #define ERROR_NONFATAL 0x100 diff --git a/print.c b/print.c index 1fdeac7..544a846 100644 --- a/print.c +++ b/print.c @@ -545,428 +545,427 @@ void print_supported(void) /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info boards_known[] = { #if defined(__i386__) || defined(__x86_64__) - B("A-Trend", "ATC-6220", 1, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), - B("abit", "A-S78H", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "AN-M2", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "AV8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "AX8", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "BM6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "Fatal1ty F-I90HD", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "IC7", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "IP35", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), - B("abit", "IP35 Pro", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), - B("abit", "IS-10", 0, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."), - B("abit", "KN8 Ultra", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), - B("abit", "NF-M2 nView", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), - B("abit", "NF-M2S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), - B("abit", "NF7-S", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), - B("abit", "VA6", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), - B("abit", "VT6X4", 1, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), - B("Acorp", "6A815EPD", 1, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), - B("Advantech", "PCM-5820", 1, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), - B("agami", "Aruma", 1, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), - B("Albatron", "PM266A Pro", 1, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ - B("AOpen", "i945GMx-VFX", 1, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."), - B("AOpen", "vKM400Am-S", 1, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL), - B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL), - B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL), - B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), - B("ASRock", "775i65G", 1, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL), - B("ASRock", "890GX Extreme3", 1, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL), - B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL), - B("ASRock", "A330GC", 1, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), - B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), - B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), - B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), - B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), - B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), - B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), - B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), - B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), - B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), - B("ASRock", "P4i65GV", 1, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), - B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), - B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), - B("ASUS", "A7N8X-VM/400", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), - B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), - B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), - B("ASUS", "A7V400-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), - B("ASUS", "A7V600-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), - B("ASUS", "A7V8X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), - B("ASUS", "A7V8X-MX", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), - B("ASUS", "A7V8X-MX SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), - B("ASUS", "A7V8X-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), - B("ASUS", "A8M2N-LA (NodusM3-GL8E)", 1, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), - B("ASUS", "A8N-E", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), - B("ASUS", "A8N-LA (Nagami-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), - B("ASUS", "A8N-SLI", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), - B("ASUS", "A8N-SLI Deluxe", 0, NULL, "Untested board enable."), - B("ASUS", "A8N-SLI Premium", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), - B("ASUS", "A8N-VM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), - B("ASUS", "A8N-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), - B("ASUS", "A8NE-FM/S", 1, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), - B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), - B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), - B("ASUS", "A8V-E SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), - B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), - B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), - B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), - B("ASUS", "K8N", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), - B("ASUS", "K8V", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), - B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), - B("ASUS", "K8V-X", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), - B("ASUS", "K8V-X SE", 1, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), - B("ASUS", "KFSN4-DRE/SAS", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL), - B("ASUS", "M2A-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), - B("ASUS", "M2A-VM (HDMI)", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL), - B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), - B("ASUS", "M2N-E", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), - B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), - B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), - B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), - B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), - B("ASUS", "M2V", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), - B("ASUS", "M2V-MX", 1, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), - B("ASUS", "M3A", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), - B("ASUS", "M3A76-CM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), - B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), - B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), - B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), - B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), - B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), - B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), - B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), - B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), - B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), - B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), - B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), - B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."), - B("ASUS", "P2B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), - B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), - B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL), - B("ASUS", "P2B-F", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), - B("ASUS", "P2B-N", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL), - B("ASUS", "P2E-M", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL), - B("ASUS", "P2L97-S", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL), - B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), - B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), - B("ASUS", "P4B533-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), - B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), - B("ASUS", "P4GV-LA (Guppy)", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), - B("ASUS", "P4P800", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), - B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), - B("ASUS", "P4P800-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), - B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), - B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), - B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), - B("ASUS", "P4S800-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), - B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), - B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), - B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), - B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), - B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), - B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), - B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), - B("ASUS", "P5GD1(-VM)", 0, NULL, "Untested board enable."), - B("ASUS", "P5GD2 Premium", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), - B("ASUS", "P5GDC Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), - B("ASUS", "P5GDC-V Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), - B("ASUS", "P5GD2/C variants", 0, NULL, "Untested board enable."), - B("ASUS", "P5K-V", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL), - B("ASUS", "P5K-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), - B("ASUS", "P5KC", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), - B("ASUS", "P5KPL-CM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL), - B("ASUS", "P5L-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), - B("ASUS", "P5L-VM 1394", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), - B("ASUS", "P5LD2", 0, NULL, "Untested board enable."), - B("ASUS", "P5LP-LE (Lithium-UL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), - B("ASUS", "P5LP-LE (Epson OEM)", 1, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), - B("ASUS", "P5LP-LE", 0, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Needs a board enable (http://patchwork.coreboot.org/patch/3298/)."), - B("ASUS", "P5N-D", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), - B("ASUS", "P5N-E SLI", 0, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), - B("ASUS", "P5N32-E SLI", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), - B("ASUS", "P5N7A-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL), - B("ASUS", "P5ND2-SLI Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), - B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), - B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL), - B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), - B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), - B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), - B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), - B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), - B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), - B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8B WS", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61 PRO", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), - B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), - B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), - B("Bifferos", "Bifferboard", 1, "http://bifferos.co.uk/", NULL), - B("Biostar", "N68S3+", 1, NULL, NULL), - B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), - B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), - B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), - B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), - B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), - B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), - B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), - B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), - B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), - B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), - B("Elitegroup", "GF7100PVT-M3 (V1.0)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL), - B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), - B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), - B("Elitegroup", "K7SEM (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL), - B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), - B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL), - B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), - B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), - B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), - B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), - B("EPoX", "EP-8NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL), - B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), - B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), - B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), - B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL), - B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), - B("FIC", "VA-502", 0, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), - B("Foxconn", "6150K8MD-8EKRSH", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), - B("Foxconn", "A6VMX", 1, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), - B("Foxconn", "P4M800P7MA-RS2", 1, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL), - B("Freetech", "P6F91i", 1, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), - B("Fujitsu-Siemens", "ESPRIMO P5915", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), - B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), - B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), - B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), - B("GIGABYTE", "GA-6IEM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL), - B("GIGABYTE", "GA-6VXE7+", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL), - B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), - B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL), - B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL), - B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL), - B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), - B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), - B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL), - B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL), - B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), - B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), - B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), - B("GIGABYTE", "GA-8SIMLH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), - B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), - B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), - B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), - B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), - B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), - B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), - B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), - B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), - B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), - B("GIGABYTE", "GA-K8NS Pro-939", 0, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."), - B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), - B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), - B("GIGABYTE", "GA-M720-US3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL), - B("GIGABYTE", "GA-MA69VM-S2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL), - B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL), - B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL), - B("GIGABYTE", "GA-MA770T-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL), - B("GIGABYTE", "GA-MA780G-UD3H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL), - B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL), - B("GIGABYTE", "GA-MA78GM-S2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ - B("GIGABYTE", "GA-MA78GPM-DS2H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), - B("GIGABYTE", "GA-MA790FX-DQ6", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), - B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), - B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), - B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), - B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), - B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL), - B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", 1, NULL, NULL), - B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), - B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), - B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), - B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), - B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), - B("HP", "ProLiant N40L", 1, NULL, NULL), - B("HP", "Puffer2-UL8E", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL), - B("HP", "dc7800", 0, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."), - B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), - B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), - B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"), - B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."), - B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), - B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), - B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), - B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), - B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"), - B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), - B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), - B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), - B("Intel", "EP80759", 1, NULL, NULL), - B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), - B("Intel", "Greencity", 1, NULL, "Intel reference board."), - B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), - B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), - B("Jetway", "J-7BXAN", 1, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL), - B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), - B("Kontron", "986LCD-M", 1, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), - B("Lanner", "EM-8510C", 1, NULL, NULL), - B("Lex", "CV700A", 1, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), - B("Mitac", "6513WU", 1, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL), - B("MSC", "Q7-TCTC", 1, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL), - B("MSI", "MS-6153", 1, "http://www.msi.com/product/mb/MS-6153.html", NULL), - B("MSI", "MS-6156", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL), - B("MSI", "MS-6163 (MS-6163 Pro)",1, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL), - B("MSI", "MS-6178", 0, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), - B("MSI", "MS-6330 (K7T Turbo)", 1, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL), - B("MSI", "MS-6391 (845 Pro4)", 1, "http://www.msi.com/product/mb/845-Pro4.html", NULL), - B("MSI", "MS-6561 (745 Ultra)", 1, "http://www.msi.com/product/mb/745-Ultra.html", NULL), - B("MSI", "MS-6566 (845 Ultra-C)",1, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL), - B("MSI", "MS-6570 (K7N2)", 1, "http://www.msi.com/product/mb/K7N2.html", NULL), - B("MSI", "MS-6577 (Xenon)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), - B("MSI", "MS-6590 (KT4 Ultra)", 1, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL), - B("MSI", "MS-6702E (K8T Neo2-F)",1, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), - B("MSI", "MS-6712 (KT4V)", 1, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL), - B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 1, "http://www.msi.com/service/search/?kw=6787&type=product", NULL), - B("MSI", "MS-7005 (651M-L)", 1, "http://www.msi.com/product/mb/651M-L.html", NULL), - B("MSI", "MS-7025 (K8N Neo2 Platinum)", 1, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL), - B("MSI", "MS-7046", 1, "http://www.heimir.de/ms7046/", NULL), - B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", 1, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), - B("MSI", "MS-7065", 1, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), - B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), - B("MSI", "MS-7142 (K8MM-V)", 1, "http://www.msi.com/product/mb/K8MM-V.html", NULL), - B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), - B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL), - B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/product/mb/PM8M3-V.html", NULL), - B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL), - B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/product/mb/K9VGM-V.html", NULL), - B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL), - B("MSI", "MS-7260 (K9N Neo PCB 1.0)", 0, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), - B("MSI", "MS-7309 (K9N6PGM2-V2)", 1, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL), - B("MSI", "MS-7312 (K9MM-V)", 1, "http://www.msi.com/product/mb/K9MM-V.html", NULL), - B("MSI", "MS-7345 (P35 Neo2-FIR)", 1, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), - B("MSI", "MS-7368 (K9AG Neo2-Digital)", 1, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), - B("MSI", "MS-7369 (K9N Neo V2)", 1, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), - B("MSI", "MS-7376 (K9A2 Platinum V1)", 1, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), - B("MSI", "MS-7529 (G31M3-L(S) V2)", 1, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), - B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), - B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), - B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL), - B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), - B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), - B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), - B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), - B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), - B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), - B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), - B("Nokia", "IP530", 1, NULL, NULL), - B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL), - B("PCCHIPS ", "M863G (V5.1A)", 1, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL), - B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL), - B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL), - B("PC Engines", "Alix.2c3", 1, "http://pcengines.ch/alix2c3.htm", NULL), - B("PC Engines", "Alix.2d3", 1, "http://pcengines.ch/alix2d3.htm", NULL), - B("PC Engines", "Alix.3c3", 1, "http://pcengines.ch/alix3c3.htm", NULL), - B("PC Engines", "Alix.3d3", 1, "http://pcengines.ch/alix3d3.htm", NULL), - B("PC Engines", "Alix.6f2", 1, "http://pcengines.ch/alix6f2.htm", NULL), - B("PC Engines", "WRAP.2E", 1, "http://pcengines.ch/wrap2e1.htm", NULL), - B("Portwell", "PEB-4700VLA", 1, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), - B("RCA", "RM4100", 1, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), - B("Samsung", "Polaris 32", 1, NULL, NULL), - B("Shuttle", "AK31", 1, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL), - B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), - B("Shuttle", "AV11V30", 1, NULL, NULL), - B("Shuttle", "AV18E2", 1, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL), - B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), - B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), - B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), - B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), - B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), - B("Soyo", "SY-6BA+ III", 1, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL), - B("Soyo", "SY-7VCA", 1, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL), - B("Sun", "Blade x6250", 1, "http://www.sun.com/servers/blades/x6250/", NULL), - B("Sun", "Fire x4150", 0, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."), - B("Sun", "Fire x4200", 0, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."), - B("Sun", "Fire x4540", 0, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."), - B("Sun", "Fire x4600", 0, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), - B("Sun", "Ultra 40 M2", 1, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL), - B("Supermicro", "H8QC8", 1, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), - B("Supermicro", "X5DP8-G2", 1, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), - B("Supermicro", "X7DBT-INF", 1, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), - B("Supermicro", "X7SPA-HF", 1, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), - B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), - B("Supermicro", "X8DTE-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL), - B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), - B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), - B("Supermicro", "X8DTT-HIBQF", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL), - B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), - B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), - B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), - B("Supermicro", "X9SCA-F", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Supermicro", "X9SCL", 0, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("T-Online", "S-100", 1, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), - B("Tekram", "P6Pro-A5", 1, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), - B("Termtek", "TK-3370 (Rev:2.5B)", 1, NULL, NULL), - B("Thomson", "IP1000", 1, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL), - B("TriGem", "Anaheim-3", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL), - B("TriGem", "Lomita", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL), - B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), - B("Tyan", "S1846 (Tsunami ATX)", 1, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL), - B("Tyan", "S2466 (Tiger MPX)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL), - B("Tyan", "S2498 (Tomcat K7M)", 1, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL), - B("Tyan", "S2723 (Tiger i7501)", 1, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL), - B("Tyan", "S2881 (Thunder K8SR)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL), - B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), - B("Tyan", "S2882-D (Thunder K8SD Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL), - B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), - B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), - B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), - B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), - B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), - B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), - B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), - B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), - B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL), - B("Tyan", "S5180 (Toledo i965R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL), - B("Tyan", "S5191 (Toledo i3000R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL), - B("Tyan", "S5197 (Toledo i3010W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL), - B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), - B("Tyan", "S5211-1U (Toledo i3200R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL), - B("Tyan", "S5220 (Toledo q35T)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL), - B("Tyan", "S5375 (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL), - B("Tyan", "S5376 (Tempest i5100W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."), - B("Tyan", "S5377 (Tempest i5100T)", 1, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL), - B("Tyan", "S5382 (Tempest i5000PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL), - B("Tyan", "S5397 (Tempest i5400PW)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL), - B("VIA", "EPIA M/MII/...", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */ - B("VIA", "EPIA SP", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "EPIA-CN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "EPIA EK", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL), - B("VIA", "EPIA-EX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "EPIA-LN", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "EPIA-M700", 1, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL), - B("VIA", "EPIA-N/NL", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */ - B("VIA", "EPIA-NX15000G", 1, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), - B("VIA", "NAB74X0", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), - B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), - B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), - B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), - B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), + B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), + B("abit", "A-S78H", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "AN-M2", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "AV8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "AX8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "BM6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "Fatal1ty F-I90HD", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "IC7", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "IP35", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), + B("abit", "IP35 Pro", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=LG…", NULL), + B("abit", "IS-10", BAD, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", "Reported by deejkuba(a)aol.com to flashrom(a)coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."), + B("abit", "KN8 Ultra", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), + B("abit", "NF-M2 nView", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "NF-M2S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), + B("abit", "NF7-S", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=So…", NULL), + B("abit", "VA6", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), + B("abit", "VT6X4", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?fMTYPE=Sl…", NULL), + B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), + B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), + B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), + B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ + B("AOpen", "i945GMx-VFX", OK, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."), + B("AOpen", "vKM400Am-S", OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL), + B("Artec Group","DBE61", OK, "http://wiki.thincan.org/DBE61", NULL), + B("Artec Group","DBE62", OK, "http://wiki.thincan.org/DBE62", NULL), + B("ASI", "MB-5BLMP", OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), + B("ASRock", "775i65G", OK, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL), + B("ASRock", "890GX Extreme3", OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL), + B("ASRock", "939A785GMH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL), + B("ASRock", "A330GC", OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), + B("ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), + B("ASRock", "ALiveNF6G-DVI", OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), + B("ASRock", "AM2NF6G-VSTA", OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), + B("ASRock", "ConRoeXFire-eSATA2", OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), + B("ASRock", "K7S41", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), + B("ASRock", "K7S41GX", OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), + B("ASRock", "K7VT4A+", BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), + B("ASRock", "K8S8X", OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL), + B("ASRock", "M3A790GXH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL), + B("ASRock", "P4i65GV", OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL), + B("ASUS", "A7N8X Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL), + B("ASUS", "A7N8X-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL), + B("ASUS", "A7N8X-VM/400", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL), + B("ASUS", "A7V133", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), + B("ASUS", "A7V333", OK, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), + B("ASUS", "A7V400-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL), + B("ASUS", "A7V600-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL), + B("ASUS", "A7V8X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL), + B("ASUS", "A7V8X-MX", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL), + B("ASUS", "A7V8X-MX SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL), + B("ASUS", "A7V8X-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL), + B("ASUS", "A8M2N-LA (NodusM3-GL8E)", OK, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&…", "This is an OEM board from HP, the HP name is NodusM3-GL8E."), + B("ASUS", "A8N-E", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL), + B("ASUS", "A8N-LA (Nagami-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&d…", "This is an OEM board from HP, the HP name is Nagami-GL8E."), + B("ASUS", "A8N-SLI", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL), + B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Untested board enable."), + B("ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL), + B("ASUS", "A8N-VM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL), + B("ASUS", "A8N-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL), + B("ASUS", "A8NE-FM/S", OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE…", NULL), + B("ASUS", "A8V Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL), + B("ASUS", "A8V-E Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL), + B("ASUS", "A8V-E SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair II Formula", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL), + B("ASUS", "Crosshair IV Extreme", OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL), + B("ASUS", "E35M1-I DELUXE", OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL), + B("ASUS", "K8N", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL), + B("ASUS", "K8V", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL), + B("ASUS", "K8V SE Deluxe", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL), + B("ASUS", "K8V-X", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL), + B("ASUS", "K8V-X SE", OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL), + B("ASUS", "KFSN4-DRE/SAS", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL), + B("ASUS", "M2A-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL), + B("ASUS", "M2A-VM (HDMI)", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL), + B("ASUS", "M2N32-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), + B("ASUS", "M2N-E", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-E SLI", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), + B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), + B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), + B("ASUS", "M2NPV-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), + B("ASUS", "M2V", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), + B("ASUS", "M2V-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), + B("ASUS", "M3A", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), + B("ASUS", "M3A76-CM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL), + B("ASUS", "M3A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), + B("ASUS", "M3N78-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), + B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), + B("ASUS", "M4A785TD-M EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), + B("ASUS", "M4A785TD-V EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), + B("ASUS", "M4A78LT-M LE", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), + B("ASUS", "M4A79T Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), + B("ASUS", "M4A87TD/USB3", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), + B("ASUS", "M4A89GTD PRO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), + B("ASUS", "M4N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), + B("ASUS", "M5A99X EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), + B("ASUS", "MEW-AM", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "MEW-VM", BAD, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "OPLX-M", NT, NULL, "Untested board enable."), + B("ASUS", "P2B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL), + B("ASUS", "P2B-D", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), + B("ASUS", "P2B-DS", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL), + B("ASUS", "P2B-F", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), + B("ASUS", "P2B-N", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL), + B("ASUS", "P2E-M", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL), + B("ASUS", "P2L97-S", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL), + B("ASUS", "P3B-F", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("ASUS", "P4B266", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), + B("ASUS", "P4B266-LM", OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), + B("ASUS", "P4B533-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL), + B("ASUS", "P4C800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL), + B("ASUS", "P4GV-LA (Guppy)", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c003…", NULL), + B("ASUS", "P4P800", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL), + B("ASUS", "P4P800-E Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL), + B("ASUS", "P4P800-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL), + B("ASUS", "P4SC-E", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), + B("ASUS", "P4SD-LA", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), + B("ASUS", "P4S533-X", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), + B("ASUS", "P4S800-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL), + B("ASUS", "P5A", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL), + B("ASUS", "P5B", OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), + B("ASUS", "P5B-Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), + B("ASUS", "P5BV-M", BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), + B("ASUS", "P5GC-MX/1333", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), + B("ASUS", "P5GD1 Pro", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), + B("ASUS", "P5GD1-VM/S", OK, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."), + B("ASUS", "P5GD1(-VM)", NT, NULL, "Untested board enable."), + B("ASUS", "P5GD2 Premium", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL), + B("ASUS", "P5GDC Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL), + B("ASUS", "P5GDC-V Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL), + B("ASUS", "P5GD2/C variants", NT, NULL, "Untested board enable."), + B("ASUS", "P5K-V", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL), + B("ASUS", "P5K-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL), + B("ASUS", "P5KC", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL), + B("ASUS", "P5KPL-CM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL), + B("ASUS", "P5L-MX", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL), + B("ASUS", "P5L-VM 1394", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL), + B("ASUS", "P5LD2", NT, NULL, "Untested board enable."), + B("ASUS", "P5LP-LE (Lithium-UL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prod…", "This is an OEM board from HP."), + B("ASUS", "P5LP-LE (Epson OEM)", OK, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."), + B("ASUS", "P5LP-LE", BAD, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."), + B("ASUS", "P5N-D", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL), + B("ASUS", "P5N-E SLI", NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."), + B("ASUS", "P5N32-E SLI", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL), + B("ASUS", "P5N7A-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL), + B("ASUS", "P5ND2-SLI Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL), + B("ASUS", "P5PE-VM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), + B("ASUS", "P5QPL-AM", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL), + B("ASUS", "P5VD1-X", OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), + B("ASUS", "P6T SE", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), + B("ASUS", "P6T Deluxe", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), + B("ASUS", "P6T Deluxe V2", OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), + B("ASUS", "P7H57D-V EVO", OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), + B("ASUS", "P7H55-M LX", BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), + B("ASUS", "P8B-E/4L", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8B WS", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 (rev. 3.1)", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8Z68-V PRO", BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), + B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), + B("BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), + B("Bifferos", "Bifferboard", OK, "http://bifferos.co.uk/", NULL), + B("Biostar", "N68S3+", OK, NULL, NULL), + B("Biostar", "M6TBA", BAD, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("Biostar", "M7NCD Pro", OK, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), + B("Biostar", "P4M80-M4", OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), + B("Biostar", "TA780G M2+", OK, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), + B("Boser", "HS-6637", BAD, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), + B("Congatec", "conga-X852", OK, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), + B("Dell", "OptiPlex GX1", OK, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), + B("Dell", "PowerEdge 1850", OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), + B("DFI", "855GME-MGF", BAD, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), + B("DFI", "Blood-Iron P35 T2RL", OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), + B("Elitegroup", "GeForce6100SM-M ", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), + B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&C…", NULL), + B("Elitegroup", "K7S5A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), + B("Elitegroup", "K7S6A", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), + B("Elitegroup", "K7SEM (V1.0A)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&C…", NULL), + B("Elitegroup", "K7VTA3", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), + B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Elitegroup", "P4VXMS (V1.0A)", OK, NULL, NULL), + B("Elitegroup", "P6IWP-Fe", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Elitegroup", "P6VAP-A+", OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), + B("Elitegroup", "RS485M-M", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Emerson", "ATCA-7360", OK, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), + B("EPoX", "EP-8K5A2", OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), + B("EPoX", "EP-8NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL), + B("EPoX", "EP-9NPA7I", OK, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), + B("EPoX", "EP-8RDA3+", OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), + B("EPoX", "EP-BX3", OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), + B("EVGA", "132-CK-NF78", OK, "http://www.evga.com/articles/385.asp", NULL), + B("EVGA", "270-WS-W555-A2 (Classified SR-2)", OK, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), + B("FIC", "VA-502", BAD, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."), + B("Foxconn", "6150K8MD-8EKRSH", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), + B("Foxconn", "A6VMX", OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=…", NULL), + B("Foxconn", "P4M800P7MA-RS2", OK, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL), + B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), + B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), + B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), + B("GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), + B("GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), + B("GIGABYTE", "GA-6IEM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL), + B("GIGABYTE", "GA-6VXE7+", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL), + B("GIGABYTE", "GA-6ZMA", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), + B("GIGABYTE", "GA-MA785GMT-UD2H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL), + B("GIGABYTE", "GA-770TA-UD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL), + B("GIGABYTE", "GA-7DXR", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL), + B("GIGABYTE", "GA-7VT600", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), + B("GIGABYTE", "GA-7ZM", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), + B("GIGABYTE", "GA-880GMA-USB3 (rev. 3.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL), + B("GIGABYTE", "GA-8I945GZME-RH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL), + B("GIGABYTE", "GA-8IP775", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), + B("GIGABYTE", "GA-8IRML", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), + B("GIGABYTE", "GA-8PE667 Ultra 2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), + B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), + B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), + B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), + B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), + B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), + B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), + B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), + B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), + B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), + B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."), + B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), + B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), + B("GIGABYTE", "GA-M720-US3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL), + B("GIGABYTE", "GA-MA69VM-S2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL), + B("GIGABYTE", "GA-MA74GM-S2H (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL), + B("GIGABYTE", "GA-MA770-UD3 (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL), + B("GIGABYTE", "GA-MA770T-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL), + B("GIGABYTE", "GA-MA780G-UD3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL), + B("GIGABYTE", "GA-MA78G-DS3H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL), + B("GIGABYTE", "GA-MA78GM-S2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.0, 1.1, or 2.x? */ + B("GIGABYTE", "GA-MA78GPM-DS2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL), + B("GIGABYTE", "GA-MA790FX-DQ6", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL), + B("GIGABYTE", "GA-MA790GP-DS4H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), + B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), + B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), + B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL), + B("GIGABYTE", "GA-X58A-UDR3 (rev. 2.0)", OK, NULL, NULL), + B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), + B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), + B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), + B("HP", "ProLiant DL145 G3", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), + B("HP", "ProLiant DL165 G6", OK, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), + B("HP", "ProLiant N40L", OK, NULL, NULL), + B("HP", "Puffer2-UL8E", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL), + B("HP", "dc7800", BAD, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328…", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."), + B("HP", "Vectra VL400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "Vectra VL420 SFF", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), + B("HP", "xw4400 (0A68h)", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"), + B("HP", "xw9400", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."), + B("IBASE", "MB899", OK, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), + B("IBM", "x3455", OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), + B("IEI", "PICOe-9452", OK, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), + B("Intel", "D201GLY", OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), + B("Intel", "D425KT", BAD, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"), + B("Intel", "D865GLC", BAD, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), + B("Intel", "DG45ID", BAD, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), + B("Intel", "DH67CF", BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), + B("Intel", "EP80759", OK, NULL, NULL), + B("Intel", "Foxhollow", OK, NULL, "Intel reference board."), + B("Intel", "Greencity", OK, NULL, "Intel reference board."), + B("Intel", "SE440BX-2", BAD, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), + B("IWILL", "DK8-HTX", OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), + B("Jetway", "J-7BXAN", OK, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL), + B("Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), + B("Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), + B("Lanner", "EM-8510C", OK, NULL, NULL), + B("Lex", "CV700A", OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), + B("Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL), + B("MSC", "Q7-TCTC", OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL), + B("MSI", "MS-6153", OK, "http://www.msi.com/product/mb/MS-6153.html", NULL), + B("MSI", "MS-6156", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/…", NULL), + B("MSI", "MS-6163 (MS-6163 Pro)", OK, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL), + B("MSI", "MS-6178", BAD, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), + B("MSI", "MS-6330 (K7T Turbo)", OK, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL), + B("MSI", "MS-6391 (845 Pro4)", OK, "http://www.msi.com/product/mb/845-Pro4.html", NULL), + B("MSI", "MS-6561 (745 Ultra)", OK, "http://www.msi.com/product/mb/745-Ultra.html", NULL), + B("MSI", "MS-6566 (845 Ultra-C)", OK, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL), + B("MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/product/mb/K7N2.html", NULL), + B("MSI", "MS-6577 (Xenon)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), + B("MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL), + B("MSI", "MS-6702E (K8T Neo2-F)", OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), + B("MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL), + B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL), + B("MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/product/mb/651M-L.html", NULL), + B("MSI", "MS-7025 (K8N Neo2 Platinum)", OK, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL), + B("MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL), + B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), + B("MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), + B("MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), + B("MSI", "MS-7142 (K8MM-V)", OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL), + B("MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), + B("MSI", "MS-7207 (K8NGM2-L)", OK, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL), + B("MSI", "MS-7211 (PM8M3-V)", OK, "http://www.msi.com/product/mb/PM8M3-V.html", NULL), + B("MSI", "MS-7236 (945PL Neo3)", OK, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL), + B("MSI", "MS-7253 (K9VGM-V)", OK, "http://www.msi.com/product/mb/K9VGM-V.html", NULL), + B("MSI", "MS-7255 (P4M890M)", OK, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL), + B("MSI", "MS-7260 (K9N Neo PCB 1.0)", BAD, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>."), + B("MSI", "MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL), + B("MSI", "MS-7312 (K9MM-V)", OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL), + B("MSI", "MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL), + B("MSI", "MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL), + B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), + B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), + B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), + B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), + B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), + B("MSI", "MS-7596 (785GM-E51)", OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL), + B("MSI", "MS-7599 (870-C45)", OK, "http://www.msi.com/product/mb/870-C45.html", NULL), + B("MSI", "MS-7613 (Iona-GL8E)", BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7635 (H55M-ED55)", BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("MSI", "MS-7640 (890FXA-GD70)", OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), + B("MSI", "MS-7642 (890GXM-G65)", OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), + B("MSI", "MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), + B("MSI", "MS-7696 (A75MA-G55)", OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), + B("MSI", "MS-7698 (E350IA-E45)", OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), + B("NEC", "PowerMate 2000", OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), + B("Nokia", "IP530", OK, NULL, NULL), + B("PCCHIPS ", "M598LMR (V9.0)", OK, NULL, NULL), + B("PCCHIPS ", "M863G (V5.1A)", OK, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL), + B("PC Engines", "Alix.1c", OK, "http://pcengines.ch/alix1c.htm", NULL), + B("PC Engines", "Alix.2c2", OK, "http://pcengines.ch/alix2c2.htm", NULL), + B("PC Engines", "Alix.2c3", OK, "http://pcengines.ch/alix2c3.htm", NULL), + B("PC Engines", "Alix.2d3", OK, "http://pcengines.ch/alix2d3.htm", NULL), + B("PC Engines", "Alix.3c3", OK, "http://pcengines.ch/alix3c3.htm", NULL), + B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL), + B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL), + B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL), + B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), + B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), + B("Samsung", "Polaris 32", OK, NULL, NULL), + B("Shuttle", "AK31", OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL), + B("Shuttle", "AK38N", OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), + B("Shuttle", "AV11V30", OK, NULL, NULL), + B("Shuttle", "AV18E2", OK, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL), + B("Shuttle", "FD37", OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), + B("Shuttle", "FH67", OK, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), + B("Shuttle", "FN25", OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), + B("Shuttle", "X50/X50(B)", OK, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), + B("Soyo", "SY-5VD", BAD, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), + B("Soyo", "SY-6BA+ III", OK, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL), + B("Soyo", "SY-7VCA", OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL), + B("Sun", "Blade x6250", OK, "http://www.sun.com/servers/blades/x6250/", NULL), + B("Sun", "Fire x4150", BAD, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."), + B("Sun", "Fire x4200", BAD, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."), + B("Sun", "Fire x4540", BAD, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."), + B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), + B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL), + B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), + B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), + B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), + B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), + B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), + B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL), + B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), + B("Supermicro", "X8DTT-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), + B("Supermicro", "X8DTT-HIBQF", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL), + B("Supermicro", "X8DTU-6TF+", BAD, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X8DTU-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), + B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), + B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), + B("Supermicro", "X9SCA-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Supermicro", "X9SCL", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("T-Online", "S-100", OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL), + B("Tekram", "P6Pro-A5", OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL), + B("Termtek", "TK-3370 (Rev:2.5B)", OK, NULL, NULL), + B("Thomson", "IP1000", OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL), + B("TriGem", "Anaheim-3", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL), + B("TriGem", "Lomita", OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL), + B("Tyan", "S5375-1U (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), + B("Tyan", "S1846 (Tsunami ATX)", OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL), + B("Tyan", "S2466 (Tiger MPX)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL), + B("Tyan", "S2498 (Tomcat K7M)", OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL), + B("Tyan", "S2723 (Tiger i7501)", OK, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL), + B("Tyan", "S2881 (Thunder K8SR)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL), + B("Tyan", "S2882 (Thunder K8S Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), + B("Tyan", "S2882-D (Thunder K8SD Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL), + B("Tyan", "S2891 (Thunder K8SRE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), + B("Tyan", "S2892 (Thunder K8SE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), + B("Tyan", "S2895 (Thunder K8WE)", OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), + B("Tyan", "S2912 (Thunder n3600R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), + B("Tyan", "S2915 (Thunder n6650W)", OK, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), + B("Tyan", "S2915-E (Thunder n6650W)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), + B("Tyan", "S2933 (Thunder n3600S)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), + B("Tyan", "S3095 (Tomcat i945GM)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), + B("Tyan", "S3992 (Thunder h2000M)", OK, "http://tyan.com/product_board_detail.aspx?pid=235", NULL), + B("Tyan", "S5180 (Toledo i965R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL), + B("Tyan", "S5191 (Toledo i3000R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL), + B("Tyan", "S5197 (Toledo i3010W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL), + B("Tyan", "S5211 (Toledo i3210W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), + B("Tyan", "S5211-1U (Toledo i3200R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL), + B("Tyan", "S5220 (Toledo q35T)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL), + B("Tyan", "S5375 (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL), + B("Tyan", "S5376 (Tempest i5100W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."), + B("Tyan", "S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL), + B("Tyan", "S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL), + B("Tyan", "S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL), + B("VIA", "EPIA M/MII/...", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-MII link for now */ + B("VIA", "EPIA SP", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "EPIA-CN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "EPIA EK", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id…", NULL), + B("VIA", "EPIA-EX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "EPIA-LN", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "EPIA-M700", OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3…", NULL), + B("VIA", "EPIA-N/NL", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), /* EPIA-N link for now */ + B("VIA", "EPIA-NX15000G", OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&…", NULL), + B("VIA", "NAB74X0", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("VIA", "pc2500e", OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), + B("VIA", "PC3500G", OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), + B("VIA", "VB700X", OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL), + B("ZOTAC", "GeForce 8200", OK, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), + B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "ZBOX HD-ID11", OK, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif {}, @@ -975,19 +974,19 @@ const struct board_info boards_known[] = { /* Please keep this list alphabetically ordered by vendor/board. */ const struct board_info laptops_known[] = { #if defined(__i386__) || defined(__x86_64__) - B("Acer", "Aspire 1520", 1, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), - B("Acer", "Aspire One", 0, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), - B("ASUS", "A8Jm", 1, NULL, NULL), - B("ASUS", "Eee PC 701 4G", 0, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), - B("ASUS", "M6Ne", 0, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), - B("Clevo", "P150HM", 0, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("Dell", "Latitude CPi A366XT", 0, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), - B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), - B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), - B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), - B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."), - B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), - B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), + B("Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspir…", NULL), + B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"), + B("ASUS", "A8Jm", OK, NULL, NULL), + B("ASUS", "Eee PC 701 4G", BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."), + B("ASUS", "M6Ne", NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."), + B("Clevo", "P150HM", BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("Dell", "Latitude CPi A366XT", BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."), + B("HP/Compaq", "nx9005", BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), + B("HP/Compaq", "nx9010", BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), + B("IBM/Lenovo", "Thinkpad T40p", BAD, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), + B("IBM/Lenovo", "Thinkpad T410s", BAD, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."), + B("IBM/Lenovo", "240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), + B("Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), #endif {}, diff --git a/print_wiki.c b/print_wiki.c index 377154d..9a9cd83 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -136,9 +136,9 @@ static void wiki_helper(const char *devicetype, int cols, const struct board_match *b = board_matches; for (i = 0; boards[i].vendor != NULL; i++) { - if (boards[i].working) + if (boards[i].working == OK) boardcount_good++; - else + if (boards[i].working == BAD) boardcount_bad++; } @@ -171,7 +171,8 @@ static void wiki_helper(const char *devicetype, int cols, b[k].lb_vendor ? b[k].lb_vendor : "", b[k].lb_vendor ? ":" : "", b[k].lb_vendor ? b[k].lb_part : "", - (boards[i].working) ? "OK" : "No"); + (boards[i].working == OK) ? "OK" : + (boards[i].working == NT) ? "?3" : "No"); if (boards[i].note) { printf("%d\n", num_notes + 1); diff --git a/programmer.h b/programmer.h index 240e1af..a074662 100644 --- a/programmer.h +++ b/programmer.h @@ -192,7 +192,7 @@ extern const struct board_match board_matches[]; struct board_info { const char *vendor; const char *name; - const int working; + const enum test_state working; #ifdef CONFIG_PRINT_WIKI const char *url; const char *note; @@ -217,7 +217,7 @@ extern struct pci_dev *pcidev_dev; struct pcidev_status { uint16_t vendor_id; uint16_t device_id; - int status; + const enum test_state status; const char *vendor_name; const char *device_name; }; @@ -415,7 +415,7 @@ extern const struct pcidev_status ata_hpt[]; struct usbdev_status { uint16_t vendor_id; uint16_t device_id; - int status; + const enum test_state status; const char *vendor_name; const char *device_name; }; -- 1.7.1

1 0

[PATCH 0/5] wiki patches 2.0
by Stefan Tauner 25 Feb '12

25 Feb '12

previous 1/5 was heavily refined into this 2/5; 5/5 fixed Stefan Tauner (5): Introduce and use enum test_state Refactor PCI and USB device status printing print_wiki.c fix columns calculations squash! print_wiki.c fix columns calculations squash! print_wiki.c fix columns calculations flash.h | 7 +- flashrom.c | 43 +++ ft2232_spi.c | 13 - pcidev.c | 1 - print.c | 1004 +++++++++++++++++++++++++++------------------------------- print_wiki.c | 231 +++++++++----- programmer.h | 18 +- 7 files changed, 688 insertions(+), 629 deletions(-)

1 0

Re: [flashrom] compiling flashrom for Debian/kFreeBSD
by Carl-Daniel Hailfinger 25 Feb '12

25 Feb '12

Hi Robert, thanks for testing that patch! Am 24.02.2012 20:14 schrieb Robert Millan: > Long time no see :-) Indeed. > El 24 de febrer de 2012 0:55, Carl-Daniel Hailfinger > <c-d.hailfinger.devel.2006(a)gmx.net> ha escrit: >> I have written a patch which should fix compilation and >> hopefully also work during runtime. > The patch works perfectly. However, some changes are gratuitous or inaccurate: > >> -#elif defined(__FreeBSD__) || defined (__DragonFly__) >> +#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined (__DragonFly__) >> if ((io_fd = open("/dev/io", O_RDWR)) < 0) { >> #else >> if (iopl(3) != 0) { > We have both interfaces. You can keep using iopl() if you like. Hm. Is iopl(3) a feature present in the FreeBSd kernel or is it just part of the compat layer presented by glibc? >> #if defined(__FreeBSD__) || defined(__DragonFly__) >> + /* Note that FreeBSD kernel with glibc does not have machine/cpufunc.h. */ >> #include <machine/cpufunc.h> >> #define off64_t off_t >> #define lseek64 lseek > Actually, we have machine/cpufunc.h (we have everything in machine/* > actually). The off_t / lseek defines after this look dangerous though > (they collide with glibc definitions). Comment has been replaced with /* Note that FreeBSD kernel with glibc has conflicting out[bwl] definitions * in machine/cpufunc.h and sys/io.h. Use cpufunc.h only for plain FreeBSD. */ >> A full build log would be nice to have so I can see any remaining build >> issues. > Attached (build.log). Looks good, and works as intended. >> If you could test if flashrom works (do NOT test flashrom on >> laptops/notebooks/servers), that would be even better. Just run >> >> flashrom -VV > Attached (run.log). The SFDP limitation you were hitting has been fixed a few minutes ago in r1506 in flashrom svn. If you have any other comments about my changes, please tell me. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[PATCH] SFDP: Fetch parameter table in a more portable way
by Carl-Daniel Hailfinger 25 Feb '12

25 Feb '12

SFDP parameter table reads expect a dummy byte between written and read data on the SPI bus. Read that dummy byte instead of writing it to be compatible with more (all) programmer drivers. Reduce SFDP parameter table read chunk size from 8 to 2 to handle programmers with small readcount limits. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-sfdp_read_dummy_reduce_param_chunksize/sfdp.c =================================================================== --- flashrom-sfdp_read_dummy_reduce_param_chunksize/sfdp.c (Revision 1505) +++ flashrom-sfdp_read_dummy_reduce_param_chunksize/sfdp.c (Arbeitskopie) @@ -19,6 +19,7 @@ #include <stdint.h> #include <stdlib.h> +#include <string.h> #include "flash.h" #include "spi.h" #include "chipdrivers.h" @@ -26,31 +27,39 @@ static int spi_sfdp_read_sfdp_chunk(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) { int i, ret; + uint8_t *newbuf; const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = { JEDEC_SFDP, (address >> 16) & 0xff, (address >> 8) & 0xff, (address >> 0) & 0xff, /* FIXME: the following dummy byte explodes on some programmers. - * One possible workaround would be to read the dummy byte + * One workaround is to read the dummy byte * instead and discard its value. */ 0 }; msg_cspew("%s: addr=0x%x, len=%d, data:\n", __func__, address, len); - ret = spi_send_command(flash, sizeof(cmd), len, cmd, buf); + newbuf = malloc(len + 1); + if (!newbuf) + return SPI_PROGRAMMER_ERROR; + ret = spi_send_command(flash, sizeof(cmd) - 1, len + 1, cmd, newbuf); + memmove(buf, newbuf + 1, len); + free(newbuf); + if (ret) + return ret; for (i = 0; i < len; i++) msg_cspew(" 0x%02x", buf[i]); msg_cspew("\n"); - return ret; + return 0; } static int spi_sfdp_read_sfdp(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) { - /* FIXME: this is wrong. There are different upper bounds for the number - * of bytes to read on the various programmers (even depending on the - * rest of the structure of the transaction).*/ - int maxstep = 8; + /* FIXME: There are different upper bounds for the number of bytes to + * read on the various programmers (even depending on the rest of the + * structure of the transaction). 2 is a safe bet. */ + int maxstep = 2; int ret = 0; while (len > 0) { int step = min(len, maxstep); -- http://www.hailfinger.org/

2 2

[commit] r1506 - trunk
by repository service 25 Feb '12

25 Feb '12

Author: hailfinger Date: Sat Feb 25 00:49:30 2012 New Revision: 1506 URL: http://flashrom.org/trac/flashrom/changeset/1506 Log: SFDP: Fetch parameter table in a more portable way SFDP parameter table reads expect a dummy byte between written data (opcode+address) and read data on the SPI bus. Read that dummy byte instead of writing it to be compatible with all programmer drivers. Reduce SFDP parameter table read chunk size from 8 to 2 to handle programmers with small readcount limits. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/sfdp.c Modified: trunk/sfdp.c ============================================================================== --- trunk/sfdp.c Wed Feb 22 01:14:14 2012 (r1505) +++ trunk/sfdp.c Sat Feb 25 00:49:30 2012 (r1506) @@ -19,6 +19,7 @@ #include <stdint.h> #include <stdlib.h> +#include <string.h> #include "flash.h" #include "spi.h" #include "chipdrivers.h" @@ -26,31 +27,39 @@ static int spi_sfdp_read_sfdp_chunk(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) { int i, ret; + uint8_t *newbuf; const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = { JEDEC_SFDP, (address >> 16) & 0xff, (address >> 8) & 0xff, (address >> 0) & 0xff, /* FIXME: the following dummy byte explodes on some programmers. - * One possible workaround would be to read the dummy byte + * One workaround is to read the dummy byte * instead and discard its value. */ 0 }; msg_cspew("%s: addr=0x%x, len=%d, data:\n", __func__, address, len); - ret = spi_send_command(flash, sizeof(cmd), len, cmd, buf); + newbuf = malloc(len + 1); + if (!newbuf) + return SPI_PROGRAMMER_ERROR; + ret = spi_send_command(flash, sizeof(cmd) - 1, len + 1, cmd, newbuf); + memmove(buf, newbuf + 1, len); + free(newbuf); + if (ret) + return ret; for (i = 0; i < len; i++) msg_cspew(" 0x%02x", buf[i]); msg_cspew("\n"); - return ret; + return 0; } static int spi_sfdp_read_sfdp(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) { - /* FIXME: this is wrong. There are different upper bounds for the number - * of bytes to read on the various programmers (even depending on the - * rest of the structure of the transaction).*/ - int maxstep = 8; + /* FIXME: There are different upper bounds for the number of bytes to + * read on the various programmers (even depending on the rest of the + * structure of the transaction). 2 is a safe bet. */ + int maxstep = 2; int ret = 0; while (len > 0) { int step = min(len, maxstep);

1 0

compiling flashrom for Debian/kFreeBSD
by Carl-Daniel Hailfinger 24 Feb '12

24 Feb '12

Hi, [please CC me, I'm not subscribed to debian-bsd] the package flashrom (version 0.9.5) fails to compile for Debian/kFreeBSD. I have written a patch which should fix compilation and hopefully also work during runtime. Compile tests and run tests (no run tests on laptops/notebooks/servers please) would be appreciated. Just run svn co svn://coreboot.org/flashrom/trunk flashrom cd flashrom curl -s http://patchwork.coreboot.org/patch/3561/raw/|patch -p1 make A full build log would be nice to have so I can see any remaining build issues. If you could test if flashrom works (do NOT test flashrom on laptops/notebooks/servers), that would be even better. Just run flashrom -VV which will spit out lots of diagnostic messages about your system and detect the flash chip. No other flash accesses (besides detection) will be performed. Thanks for your help. Regards, Carl-Daniel

2 1

Re: [flashrom] Biostar H61MU3
by Stefan Tauner 23 Feb '12

23 Feb '12

On Wed, 22 Feb 2012 19:24:03 -0800 Peter Van Eenoo <petervaneenoo(a)gmail.com> wrote: > I can confirm the chip is cFeon EN25Q32A thank you, i have made the appropriate changes locally and will commit them later. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Biostar H61MU3
by Stefan Tauner 23 Feb '12

23 Feb '12

On Wed, 22 Feb 2012 08:52:08 -0800 Peter Van Eenoo <petervaneenoo(a)gmail.com> wrote: > Here is the output from -V > > […] > Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI). > This chip may contain one-time programmable memory. flashrom cannot read > and may never be able to write it, hence it may not be able to completely > clone the contents of this chip (see man page for details). > === > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom(a)flashrom.org if any of the above > operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, -Vr, > -VE, -Vw), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! Hello Peter, thanks for your report! I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. Can you please take a look at the board itself and verify that the flash chip is really an Eon EN25Q32 (variant)? The chip is located near the southbridge (heatsink) opposite of the pci slots. I can then mark the probe operation for it as tested… -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [PATCH 1/5] print_wiki.c: count pci devices and cleanup
by Stefan Tauner 23 Feb '12

23 Feb '12

On Mon, 20 Feb 2012 18:18:18 +0100 Idwer Vollering <vidwer(a)gmail.com> wrote: > Can you incorporate this too? thanks for the suggestions... i think i will solve this another way though, and that is by adding a function pointer to the programmer struct that does the printing or something like that. thanks for pushing me there :) but please dont post it like this in the future... either comment inline if the changes are small or can not be expressed well in code, or just send a complete fixup/followup patch that actually applies on top of the patch you comment on (or instead of it). it was quite some work to figure out what you have done and extract it from the mail even though you explained it on IRC. also, you confused patchwork which confused me even more :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] dummyflasher.c: add support for SFDP by adding a new emulator chip: W25Q64CV
by Carl-Daniel Hailfinger 23 Feb '12

23 Feb '12

Am 20.02.2012 17:07 schrieb Stefan Tauner: > TODO: > - how should the SFDP data be supplied/selected by the user? > - option A (suggested one): add a default table with a legit complete table Good idea. > and a programmer option to use a binary file instead. I think having the file+builtin combination is overkill. Builtin should be sufficient, unless you plan to focus more on making flashrom a verification tool for flash vendors. > - Manpage > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > dummyflasher.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++++++----- > 1 files changed, 82 insertions(+), 8 deletions(-) > > diff --git a/dummyflasher.c b/dummyflasher.c > index afe0518..6d8b9a2 100644 > --- a/dummyflasher.c > +++ b/dummyflasher.c > @@ -45,6 +45,7 @@ enum emu_chip { > EMULATE_ST_M25P10_RES, > EMULATE_SST_SST25VF040_REMS, > EMULATE_SST_SST25VF032B, > + EMULATE_WINBOND_W25Q64CV, > }; > static enum emu_chip emu_chip = EMULATE_NONE; > static char *emu_persistent_image = NULL; > @@ -61,6 +62,40 @@ unsigned char spi_blacklist[256]; > unsigned char spi_ignorelist[256]; > int spi_blacklist_size = 0; > int spi_ignorelist_size = 0; > + > +/* legit intel version */ > +/* > +static const uint8_t const sfdp_table[256] = { > + 0x53, 0x46, 0x44, 0x50, // @0x00 > + 0x00, 0x01, 0x00, 0xFF, // @0x04 > + 0x00, 0x00, 0x01, 0x04, // @0x08: len = 4 instead of 9 > + 0x14, 0x00, 0x00, 0xFF, // @0x0C: PTP0 = 0x14 instead of 0x80 > + 0xFF, 0xFF, 0xFF, 0xFF, // @0x10 > + 0xE5, 0x20, 0xF1, 0xFF, // @0x14 > + 0xFF, 0xFF, 0xFF, 0x03, // @0x18 > + 0x44, 0xEB, 0x08, 0x6B, // @0x1C > + 0x08, 0x3B, 0x80, 0xBB, // @0x20 > + > +}; > +*/ > +/* legit complete table */ > +static const uint8_t const sfdp_table[256] = { > + 0x53, 0x46, 0x44, 0x50, // @0x00 > + 0x00, 0x01, 0x00, 0xFF, // @0x04 > + 0x00, 0x00, 0x01, 0x09, // @0x08 > + 0x14, 0x00, 0x00, 0xFF, // @0x0C: PTP0 = 0x14 instead of 0x80 > + 0xFF, 0xFF, 0xFF, 0xFF, // @0x10 > + 0xE5, 0x20, 0xF1, 0xFF, // @0x14 > + 0xFF, 0xFF, 0xFF, 0x03, // @0x18 > + 0x44, 0xEB, 0x08, 0x6B, // @0x1C > + 0x08, 0x3B, 0x80, 0xBB, // @0x20 > + 0xEE, 0xFF, 0xFF, 0xFF, // @0x24 > + 0xFF, 0xFF, 0x00, 0x00, // @0x28 > + 0xFF, 0xFF, 0x00, 0x00, // @0x2C > + 0x0C, 0x20, 0x0F, 0x52, // @0x30 > + 0x10, 0xD8, 0x00, 0x00, // @0x34 > +}; > + > #endif > #endif > > @@ -296,6 +331,19 @@ int dummy_init(void) > msg_pdbg("Emulating SST SST25VF032B SPI flash chip (RDID, AAI " > "write)\n"); > } > + if (!strcmp(tmp, "W25Q64CV")) { > + emu_chip = EMULATE_WINBOND_W25Q64CV; > + emu_chip_size = 8 * 1024 * 1024; > + emu_max_byteprogram_size = 256; > + emu_max_aai_size = 0; > + emu_jedec_se_size = 4 * 1024; > + emu_jedec_be_52_size = 32 * 1024; > + emu_jedec_be_d8_size = 64 * 1024; > + emu_jedec_ce_60_size = emu_chip_size; > + emu_jedec_ce_c7_size = emu_chip_size; > + msg_pdbg("Emulating Winbond W25Q64CV SPI flash chip (RDID, " > + "SFDP)\n"); > + } > #endif > if (emu_chip == EMULATE_NONE) { > msg_perr("Invalid chip specified for emulation: %s\n", tmp); > @@ -471,15 +519,26 @@ static int emulate_spi_chip_response(unsigned int writecnt, > readarr[1] = 0x44; > break; > case JEDEC_RDID: > - if (emu_chip != EMULATE_SST_SST25VF032B) > + switch (emu_chip) { > + case EMULATE_SST_SST25VF032B: > + if (readcnt > 0) > + readarr[0] = 0xbf; > + if (readcnt > 1) > + readarr[1] = 0x25; > + if (readcnt > 2) > + readarr[2] = 0x4a; > break; > - /* Respond with SST_SST25VF032B. */ > - if (readcnt > 0) > - readarr[0] = 0xbf; > - if (readcnt > 1) > - readarr[1] = 0x25; > - if (readcnt > 2) > - readarr[2] = 0x4a; > + case EMULATE_WINBOND_W25Q64CV: > + if (readcnt > 0) > + readarr[0] = 0xef; > + if (readcnt > 1) > + readarr[1] = 0x40; > + if (readcnt > 2) > + readarr[2] = 0x17; > + break; > + default: /* ignore */ > + break; > + } > break; > case JEDEC_RDSR: > memset(readarr, 0, readcnt); > @@ -629,6 +688,20 @@ static int emulate_spi_chip_response(unsigned int writecnt, > /* emu_jedec_ce_c7_size is emu_chip_size. */ > memset(flashchip_contents, 0xff, emu_jedec_ce_c7_size); > break; > + case JEDEC_SFDP: > + if (emu_chip != EMULATE_WINBOND_W25Q64CV) > + break; > + offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; > + /* > + * FIXME: There is one dummy byte (i.e. 8 clock cycles) to be > + * transferred after the address. Since we can not observe the > + * clock, we would need to check for appropriate writecnt and/or > + * readcnt and recalculate the parameters below. > + */ > + /* FIXME: this could be more sophisticated. */ > + memcpy(readarr, sfdp_table + offs, > + min(sizeof(sfdp_table) - offs, readcnt)); That memcpy will segfault if offs>sizeof(sfdp_table). Suggestion: Replace the whole case statement with this (some 80 col reformatting may be needed): case JEDEC_SFDP: int toread; if (emu_chip != EMULATE_WINBOND_W25Q64CV) break; if (writecnt < 4) break; offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; /* The response is shifted if more than 4 bytes are written. */ offs += writecnt - 4; /* The SFDP spec suggests wraparound is allowed. */ offs %= sizeof(sfdp_table); toread = min(sizeof(sfdp_table) - offs, readcnt); memcpy(readarr, sfdp_table + offs, toread); if (toread < readcnt) memcpy(readarr + toread, sfdp_table, min(sizeof(sfdp_table),readcnt - toread)); if (readcnt - toread > sizeof(sfdp_table)) msg_pdbg("Reading more than SFDP table size in one " "chunk, contents may be incomplete.\n"); > + break; > default: > /* No special response. */ > break; > @@ -657,6 +730,7 @@ static int dummy_spi_send_command(struct flashctx *flash, unsigned int writecnt, > case EMULATE_ST_M25P10_RES: > case EMULATE_SST_SST25VF040_REMS: > case EMULATE_SST_SST25VF032B: > + case EMULATE_WINBOND_W25Q64CV: > if (emulate_spi_chip_response(writecnt, readcnt, writearr, > readarr)) { > msg_pdbg("Invalid command sent to flash chip!\n"); Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Biostar H61MU3
by Peter Van Eenoo 22 Feb '12

22 Feb '12

Here is the output from -V flashrom v0.9.5-r1504 on Linux 3.2.7-1-ARCH (x86_64), built with libpci 3.1.9, GCC 4.6.2 20120120 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 2394M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10002 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "BIOSTAR Group" DMI string system-product-name: "H61MU3" DMI string system-version: "6.0" DMI string baseboard-manufacturer: "BIOSTAR Group" DMI string baseboard-product-name: "H61MU3" DMI string baseboard-version: "6.0" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel H61" with PCI ID 8086:1c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0200 FREG1: BIOS region (0x00200000-0x003fffff) is read-write. 0x5C: 0x01ff0001 FREG2: WARNING: Management Engine region (0x00001000-0x001fffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching disabled, caching enabled, OK. Super I/O ID 0x8728 is not on the list of flash capable controllers. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Chip status register is 00 Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI) at physical address 0xffc00000. Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x1c, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1c, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1c, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1c, id2 0x15 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x27, id2 0xb9, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. Restoring MMIO space at 0x7f10a27dc8a0 Restoring MMIO space at 0x7f10a27dc89c Restoring MMIO space at 0x7f10a27dc898 Restoring MMIO space at 0x7f10a27dc896 Restoring MMIO space at 0x7f10a27dc894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Re: [flashrom] [PATCH] Fix SFDP probing.
by Carl-Daniel Hailfinger 22 Feb '12

22 Feb '12

Am 22.02.2012 00:14 schrieb Stefan Tauner: > sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it > looked for eraser slots that have no erase functions set instead of > those that have one set. > > Postpone adding an erase function for the special 4k block erase > opcode until we know the flash chip size and add an additional check > to sfdp_add_uniform_eraser. > > Fix the output of the parameter table contents. > > This patch fixes the index used to retrieve the eraser types, which > was off one double word. > > Refine some messages and add a few further debugging prints. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> I assume this has been tested with the dummy simulator. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1505 - trunk
by repository service 22 Feb '12

22 Feb '12

Author: stefanct Date: Wed Feb 22 01:14:14 2012 New Revision: 1505 URL: http://flashrom.org/trac/flashrom/changeset/1505 Log: Fix SFDP probing. sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it looked for eraser slots that have no erase functions set instead of those that have one set. Postpone adding an erase function for the special 4k block erase opcode until we know the flash chip size and add an additional check to sfdp_add_uniform_eraser. Fix the output of the parameter table contents. This patch fixes the index used to retrieve the eraser types, which was off one double word. Refine some messages and add a few further debugging prints. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/sfdp.c Modified: trunk/sfdp.c ============================================================================== --- trunk/sfdp.c Sat Feb 18 03:38:36 2012 (r1504) +++ trunk/sfdp.c Wed Feb 22 01:14:14 2012 (r1505) @@ -78,8 +78,10 @@ uint32_t total_size = flash->total_size * 1024; erasefunc_t *erasefn = spi_get_erasefn_from_opcode(opcode); - if (erasefn == NULL || block_size == 0 || total_size % block_size != 0) { - msg_cdbg("%s: invalid input\n", __func__); + if (erasefn == NULL || total_size == 0 || block_size == 0 || + total_size % block_size != 0) { + msg_cdbg("%s: invalid input, please report to " + "flashrom(a)flashrom.org\n", __func__); return 1; } @@ -89,11 +91,12 @@ if (eraser->eraseblocks[0].size == block_size && eraser->block_erase == erasefn) { msg_cdbg2(" Tried to add a duplicate block eraser: " - "%d x %d B with opcode 0x%02x\n", + "%d x %d B with opcode 0x%02x.\n", total_size/block_size, block_size, opcode); return 1; } - if (eraser->eraseblocks[0].size != 0 || !eraser->block_erase) { + if (eraser->eraseblocks[0].size != 0 || + eraser->block_erase != NULL) { msg_cspew(" Block Eraser %d is already occupied.\n", i); continue; @@ -115,11 +118,12 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) { + uint8_t opcode_4k_erase = 0xFF; uint32_t tmp32; uint8_t tmp8; uint32_t total_size; /* in bytes */ uint32_t block_size; - int dw, j; + int j; msg_cdbg("Parsing JEDEC flash parameter table... "); if (len != 9 * 4 && len != 4 * 4) { @@ -129,11 +133,10 @@ msg_cdbg2("\n"); /* 1. double word */ - dw = 0; - tmp32 = buf[(4 * dw) + 0]; - tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8; - tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16; - tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24; + tmp32 = ((unsigned int)buf[(4 * 0) + 0]); + tmp32 |= ((unsigned int)buf[(4 * 0) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * 0) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * 0) + 3]) << 24; tmp8 = (tmp32 >> 17) & 0x3; switch (tmp8) { @@ -181,15 +184,17 @@ } if ((tmp32 & 0x3) == 0x1) { - sfdp_add_uniform_eraser(flash, (tmp32 >> 8) & 0xFF, 4 * 1024); - } + opcode_4k_erase = (tmp32 >> 8) & 0xFF; + msg_cspew(" 4kB erase opcode is 0x%02x.\n", opcode_4k_erase); + /* add the eraser later, because we don't know total_size yet */ + } else + msg_cspew(" 4kB erase opcode is not defined.\n"); /* 2. double word */ - dw = 1; - tmp32 = buf[(4 * dw) + 0]; - tmp32 |= ((unsigned int)buf[(4 * dw) + 1]) << 8; - tmp32 |= ((unsigned int)buf[(4 * dw) + 2]) << 16; - tmp32 |= ((unsigned int)buf[(4 * dw) + 3]) << 24; + tmp32 = ((unsigned int)buf[(4 * 1) + 0]); + tmp32 |= ((unsigned int)buf[(4 * 1) + 1]) << 8; + tmp32 |= ((unsigned int)buf[(4 * 1) + 2]) << 16; + tmp32 |= ((unsigned int)buf[(4 * 1) + 3]) << 24; if (tmp32 & (1 << 31)) { msg_cdbg("Flash chip size >= 4 Gb/512 MB not supported.\n"); @@ -204,31 +209,38 @@ return 1; } + if (opcode_4k_erase != 0xFF) + sfdp_add_uniform_eraser(flash, opcode_4k_erase, 4 * 1024); + /* FIXME: double words 3-7 contain unused fast read information */ if (len == 4 * 4) { - msg_cdbg("It seems like this chip supports the preliminary " + msg_cdbg(" It seems like this chip supports the preliminary " "Intel version of SFDP, skipping processing of double " "words 3-9.\n"); goto done; } - dw = 8; + /* 8. double word */ for (j = 0; j < 4; j++) { - /* 8 double words from the start + 2 words for every eraser */ - tmp8 = buf[(4 * dw) + (2 * j)]; + /* 7 double words from the start + 2 bytes for every eraser */ + tmp8 = buf[(4 * 7) + (j * 2)]; + msg_cspew(" Erase Sector Type %d Size: 0x%02x\n", j + 1, + tmp8); if (tmp8 == 0) { - msg_cdbg2(" Block eraser %d is unused.\n", j); + msg_cspew(" Erase Sector Type %d is unused.\n", j); continue; } if (tmp8 >= 31) { - msg_cdbg2(" Block size of eraser %d (2^%d) is too big " - "for flashrom.\n", j, tmp8); + msg_cdbg2(" Block size of erase Sector Type %d (2^%d) " + "is too big for flashrom.\n", j, tmp8); continue; } block_size = 1 << (tmp8); /* block_size = 2 ^ field */ - tmp8 = buf[(4 * dw) + (2 * j) + 1]; + tmp8 = buf[(4 * 7) + (j * 2) + 1]; + msg_cspew(" Erase Sector Type %d Opcode: 0x%02x\n", j + 1, + tmp8); sfdp_add_uniform_eraser(flash, tmp8, block_size); } @@ -332,7 +344,7 @@ if ((tmp32 % 8) == 0) { msg_cspew(" 0x%04x: ", tmp32); } - msg_cspew(" %02x", buf[tmp32]); + msg_cspew(" %02x", tbuf[tmp32]); if ((tmp32 % 8) == 7) { msg_cspew("\n"); continue; @@ -342,6 +354,7 @@ continue; } } + msg_cspew("\n"); if (i == 0) { /* Mandatory JEDEC SFDP parameter table */ if (hdrs[i].id != 0)

1 0

Re: [flashrom] [PATCH] Fix sfdp_add_uniform_eraser and its usage.
by Carl-Daniel Hailfinger 22 Feb '12

22 Feb '12

Please use "Fix SFDP probing" as commit message headline and commit the whole batch of SFDP bugfixes in one commit once the patch is fixed. Am 20.02.2012 22:29 schrieb Stefan Tauner: > sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it > looked for eraser slots that have no erase functions set instead of > those that have one set. > > Postpone adding an erase function for the special 4k block erase > opcode until we know the flash chip size. > Check for zero chip size in sfdp_add_uniform_eraser. > > Fix the output of the parameter table contents. > > This patch fixes the index used to retrieve the eraser types, which > was off one double word. For me it looks like this part of the patch introduced a new bug. > Refine some messages and add a few further debugging prints. > > --- > has been tested with the new emulator to be able to write successfully > and also handle some error cases as expected. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > sfdp.c | 38 ++++++++++++++++++++++++++------------ > 1 files changed, 26 insertions(+), 12 deletions(-) > > diff --git a/sfdp.c b/sfdp.c > index 75dfb5f..e1897c7 100644 > --- a/sfdp.c > +++ b/sfdp.c > @@ -213,22 +223,25 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) > goto done; > } > > - dw = 8; > + /* 8. double word */ > + dw = 7; > for (j = 0; j < 4; j++) { > - /* 8 double words from the start + 2 words for every eraser */ > + /* 8 double words from the start + 2 bytes for every eraser */ > tmp8 = buf[(4 * dw) + (2 * j)]; 8 double words from the start is 32 bytes from the start. Last time I checked, 7*4 was not 32. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

DG965OT
by tom kel 21 Feb '12

21 Feb '12

# flashrom -r backup.bin -VV flashrom v0.9.5-r1503 on Linux 3.0-ARCH (x86_64), built with libpci 3.1.9, GCC 4.6.2 20120120 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1797M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10011 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. sh: dmidecode: command not found dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel ICH8DH" with PCI ID 8086:2812. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2 WARNING: Setting 0xdc from 0x2 to 0x3 on ICH8DH failed. New value is 0x2. Root Complex Register Block address = 0xfed1c000 GCS = 0x880464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x9f, read w/o addr, none op[1]: 0xab, read w/ addr, none op[2]: 0x00, read w/o addr, none op[3]: 0x00, read w/o addr, none op[4]: 0x00, read w/o addr, none op[5]: 0x00, read w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x00, Pre-OP 1: 0x00 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x08: 0x00003000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x00ff0035 FREG1: BIOS region (0x00035000-0x000fffff) is read-write. 0x5C: 0x00340003 FREG2: WARNING: Management Engine region (0x00003000-0x00034fff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x64: 0x00000000 FREG4: WARNING: Platform Data region (0x00000000-0x00000fff) is locked. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x004200 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 0x94: 0x0000 (PREOP) 0x96: 0x0008 (OPTYPE) 0x98: 0x0000ab9f (OPMENU) 0x9C: 0x00000000 (OPMENU+4) 0xC1: 0xffffffff (VSCC) VSCC: BES=0x3, WG=1, WSR=1, WEWS=1, EO=0xff, VCL=1 Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x03040001 FLMAP1 0x01100206 FLMAP2 0x00000120 --- Details --- NR (Number of Regions): 4 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x010 ISL (ICH/PCH Strap Length): 1 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x00300001 FLILL 0x00000000 --- Details --- Component 1 density: 1 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 20 MHz Write and Erase Clock Freq.: 20 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x00ff0035 FLREG2 0x00340003 FLREG3 0x00020001 FLREG4 0x00000000 --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00035000 - 0x000fffff Region 2 (ME ) 0x00003000 - 0x00034fff Region 3 (GbE ) 0x00001000 - 0x00002fff Region 4 (Platf.) 0x00000000 - 0x00000fff === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08090218 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE r rw Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching disabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 1024 kB. There is only one partition containing the whole address space (0x000000 - 0x0fffff). There are 256 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (1024 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x89, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x89, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x89, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x48, id2 0x2a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x89, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x89, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xd3, id2 0x56, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (1024 kB, Programmer-specific). Reading flash... Reading 1048576 bytes starting at 0x000000. Transaction error between offset 0x00003000 and 0x0000303f (= 0x00003000 + 63)! HSFS: FDONE=1, FCERR=1, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 Read operation failed! FAILED. Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Re: [flashrom] [PATCH] Fix sfdp_add_uniform_eraser and its usage.
by Carl-Daniel Hailfinger 20 Feb '12

20 Feb '12

Am 19.02.2012 20:05 schrieb Stefan Tauner: > sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it looked for > eraser slots that have no erase functions set instead of those that have one set. > > Also, the special 4k opcode encoded in the first double word was tried to add > with sfdp_add_uniform_eraser -ENOPARSE > although the total size of the chip was not yet > known. This is now postponed and an additional check to sfdp_add_uniform_eraser > is added. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > this is the last fixup combined with what is described in the second half > of the commit log above. > > sfdp.c | 18 +++++++++++++----- > 1 files changed, 13 insertions(+), 5 deletions(-) > > diff --git a/sfdp.c b/sfdp.c > index 75dfb5f..80faeca 100644 > --- a/sfdp.c > +++ b/sfdp.c > @@ -78,8 +78,10 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3 > uint32_t total_size = flash->total_size * 1024; > erasefunc_t *erasefn = spi_get_erasefn_from_opcode(opcode); > > - if (erasefn == NULL || block_size == 0 || total_size % block_size != 0) { > - msg_cdbg("%s: invalid input\n", __func__); > + if (erasefn == NULL || total_size == 0 || block_size == 0 || > + total_size % block_size != 0) { > + msg_cdbg("%s: invalid input, please report to " > + "flashrom(a)flashrom.org\n", __func__); > return 1; > } > > @@ -89,11 +91,12 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3 > if (eraser->eraseblocks[0].size == block_size && > eraser->block_erase == erasefn) { > msg_cdbg2(" Tried to add a duplicate block eraser: " > - "%d x %d B with opcode 0x%02x\n", > + "%d x %d B with opcode 0x%02x.\n", > total_size/block_size, block_size, opcode); > return 1; > } > - if (eraser->eraseblocks[0].size != 0 || !eraser->block_erase) { > + if (eraser->eraseblocks[0].size != 0 || > + eraser->block_erase != NULL) { > msg_cspew(" Block Eraser %d is already occupied.\n", > i); > continue; > @@ -115,6 +118,7 @@ static int sfdp_add_uniform_eraser(struct flashctx *flash, uint8_t opcode, uint3 > > static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) > { > + uint8_t opcode_4k = 0xFF; rename to opcode_4k_erase? > uint32_t tmp32; > uint8_t tmp8; > uint32_t total_size; /* in bytes */ > @@ -181,7 +185,8 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) > } > > if ((tmp32 & 0x3) == 0x1) { > - sfdp_add_uniform_eraser(flash, (tmp32 >> 8) & 0xFF, 4 * 1024); > + /* add the eraser later, because we don't know total_size yet */ > + opcode_4k = (tmp32 >> 8) & 0xFF; > } > > /* 2. double word */ > @@ -204,6 +209,9 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) > return 1; > } > > + if (opcode_4k != 0xFF) > + sfdp_add_uniform_eraser(flash, opcode_4k, 4 * 1024); > + > /* FIXME: double words 3-7 contain unused fast read information */ > > if (len == 4 * 4) { How well-tested is this? I'd rather not have a fixup for the fixup. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom