- flashrom - mail.coreboot.org

Supports flash rom qnap devices
by forensic.technologie 21 Feb '16

21 Feb '16

Supports flash rom also Qanp nas devices . If so you could describe how. Thank you very much

2 1

Confirmed working devices, Intel 82599ES - Hewlett-Packard Company Ethernet 10Gb 2-port 560SFP+ Adapter
by Tom Eichhorn 21 Feb '16

21 Feb '16

Hi, flashrom works like a charm on the device mentioned in the subject: root@cbk130544:~# flashrom -p nicintel_spi:pci=05:00.0 flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found Atmel flash chip "AT25DF041A" (512 kB, SPI) on nicintel_spi. No operations were specified. There is also a variant with a different flash chips, which works fine: root@cbk130644:~# sudo flashrom -p nicintel_spi:pci=05:00.0 flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found SST flash chip "SST25VF040B" (512 kB, SPI) on nicintel_spi. Found SST flash chip "SST25VF040B.REMS" (512 kB, SPI) on nicintel_spi. Multiple flash chip definitions match the detected chip(s): "SST25VF040B", "SST25VF040B.REMS" Please specify which chip definition to use with the -c <chipname> option. Thanks for the great work! Tom -- SysEleven GmbH Umspannwerk - Aufgang C Ohlauer Straße 43 10999 Berlin Tel +49 30 233 2012 0 Fax +49 30 616 755 50 http://www.syseleven.de http://www.facebook.com/SysEleven Firmensitz: Berlin Registergericht: AG Berlin Charlottenburg, HRB 108571 B Geschäftsführer: Marc Korthaus, Jens Ihlenfeld

2 1

two supported/tested asrock boards
by 2ytvpw+a518af1s6j3bg＠guerrillamail.com 21 Feb '16

21 Feb '16

Those two boards are working fine with flashrom (read and write with internal flasher): Asrock Fatal1ty 970 Performance http://www.asrock.com/mb/AMD/Fatal1ty%20970%20Performance/ and Asrock P4i65G http://www.asrock.com/mb/Intel/P4i65G/ ---- Sent using GuerrillaMail.com Block or report abuse: https://www.guerrillamail.com/abuse/?a=R011FgUSTLk1jgK143YNfRmJQtiX

2 1

[PATCH] makefile: allow to disable all default-yes config variables with CONFIG_NOTHING=yes.
by Stefan Tauner 21 Feb '16

21 Feb '16

All credit for this should be given to Patrick Georgi (see r1869). Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- Makefile | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Makefile b/Makefile index 095a49c..976d7ba 100644 --- a/Makefile +++ b/Makefile @@ -541,6 +541,13 @@ CONFIG_CH341A_SPI ?= yes # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no +# Disable all features if CONFIG_NOTHING=yes is given +ifeq ($(CONFIG_NOTHING), yes) +$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ + $(if $(filter yes, $($(var))),\ + $(eval $(var)=no))) +endif + # Enable all features if CONFIG_EVERYTHING=yes is given ifeq ($(CONFIG_EVERYTHING), yes) $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\ -- Kind regards, Stefan Tauner

1 0

[commit] r1938 - trunk
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 12:18:24 2016 New Revision: 1938 URL: http://flashrom.org/trac/flashrom/changeset/1938 Log: Automatically disable atapromise for libpayload as well. The atapromise module uses the rom_size field of the struct pci_dev found in pci.h that does not exist in libpayload's implementation and thus does not compile with libpayload. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sun Feb 21 01:21:11 2016 (r1937) +++ trunk/Makefile Sun Feb 21 12:18:24 2016 (r1938) @@ -292,6 +292,12 @@ else override CONFIG_DUMMY = no endif +# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires. +ifeq ($(CONFIG_ATAPROMISE), yes) +UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes +else +override CONFIG_ATAPROMISE = no +endif # Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes

1 0

[PATCH] Add support for GigaDevice GD25VQ41B
by Hatim Kanchwala 21 Feb '16

21 Feb '16

Here's the updated patch which incorporates Urja's suggestion. I have also fixed the (nasty :p) typo I made earlier. Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> --- flashchips.c | 40 ++++++++++++++++++++++++++++++++++++++++ flashchips.h | 1 + 2 files changed, 41 insertions(+) diff --git a/flashchips.c b/flashchips.c index c60514b..99b79db 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6243,26 +6243,66 @@ const struct flashchip flashchips[] = { }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { + .vendor = "GigaDevice", + .name = "GD25VQ41B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25VQ41B, + .total_size = 512, + .page_size = 256, + /* Lockable Security Registers: 3 * 512B total; read 0x48, write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd Status Register; read 0x35 */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2300, 3600}, + }, + + { .vendor = "Hyundai", .name = "HY29F002T", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, .model_id = HYUNDAI_HY29F002T, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { diff --git a/flashchips.h b/flashchips.h index 74c44a0..e469363 100644 --- a/flashchips.h +++ b/flashchips.h @@ -368,26 +368,27 @@ #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ #define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 +#define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ #define HYUNDAI_HY29LV800B 0x5B #define HYUNDAI_HY29F040A 0xA4 #define HYUNDAI_HY29F400B 0xAB /* Same as HY29F400AB */ #define HYUNDAI_HY29F002B 0x34 #define HYUNDAI_HY29F002T 0xB0 #define HYUNDAI_HY29LV400T 0xB9 #define HYUNDAI_HY29LV400B 0xBA #define HYUNDAI_HY29F080 0xD5 -- Regards, Hatim Kanchwala http://hatimak.me B. Tech. Electrical Engineering Indian Institute of Technology Patna

2 2

[PATCH] Add support for GigaDevice GD25Q128C
by Hatim Kanchwala 21 Feb '16

21 Feb '16

Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> --- flashchips.c | 41 +++++++++++++++++++++++++++++++++++++++++ flashchips.h | 3 ++- 2 files changed, 43 insertions(+), 1 deletion(-) diff --git a/flashchips.c b/flashchips.c index 26a8d89..12c5c62 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6206,26 +6206,67 @@ const struct flashchip flashchips[] = { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", + .name = "GD25Q128C", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 3 * 512B total; read 0x48; write 0x42, erase 0x44 */ + /* QPI: enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25T80, .total_size = 1024, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { diff --git a/flashchips.h b/flashchips.h index e469363..3ab1e07 100644 --- a/flashchips.h +++ b/flashchips.h @@ -361,27 +361,28 @@ #define FUJITSU_MBM29LV160BE 0x49 /* 16 b mode 0x2249 */ #define FUJITSU_MBM29LV160TE 0xC4 /* 16 b mode 0x22C4 */ #define GIGADEVICE_ID 0xC8 /* GigaDevice */ #define GIGADEVICE_GD25T80 0x3114 #define GIGADEVICE_GD25Q512 0x4010 #define GIGADEVICE_GD25Q10 0x4011 #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ -#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ +#define GIGADEVICE_GD25Q128 0x4018 /* Same as GD25Q128B and GD25Q128C (distinguish by RES/REMS) */ +#define GIGADEVICE_GD25Q128C 0x17 #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 #define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ #define HYUNDAI_HY29LV800B 0x5B -- Regards, Hatim Kanchwala http://hatimak.me B. Tech. Electrical Engineering Indian Institute of Technology Patna

2 4

[commit] r1937 - trunk
by repository service 21 Feb '16

21 Feb '16

Author: stefanct Date: Sun Feb 21 01:21:11 2016 New Revision: 1937 URL: http://flashrom.org/trac/flashrom/changeset/1937 Log: Add support for GigaDevice GD25VQ41B and GD25Q128C. Signed-off-by: Hatim Kanchwala <hatim(a)hatimak.me> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Feb 20 23:28:16 2016 (r1936) +++ trunk/flashchips.c Sun Feb 21 01:21:11 2016 (r1937) @@ -6216,6 +6216,47 @@ { .vendor = "GigaDevice", + .name = "GD25Q128C", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + /* QPI: enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, @@ -6253,6 +6294,46 @@ }, { + .vendor = "GigaDevice", + .name = "GD25VQ41B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25VQ41B, + .total_size = 512, + .page_size = 256, + /* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd Status Register; read 0x35 */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2300, 3600}, + }, + + { .vendor = "Hyundai", .name = "HY29F002T", .bustype = BUS_PARALLEL, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sat Feb 20 23:28:16 2016 (r1936) +++ trunk/flashchips.h Sun Feb 21 01:21:11 2016 (r1937) @@ -371,13 +371,14 @@ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ -#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ +#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B and GD25Q128C only, can be distinguished by SFDP */ #define GIGADEVICE_GD25LQ40 0x6013 #define GIGADEVICE_GD25LQ80 0x6014 #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 +#define GIGADEVICE_GD25VQ41B 0x4213 #define GIGADEVICE_GD29GL064CAB 0x7E0601 #define HYUNDAI_ID 0xAD /* Hyundai */

1 0

Fwd: unlocked optiplex 3010 flash with me_clr jumper
by Jason Salopek 21 Feb '16

21 Feb '16

Hi, I am trying to unbrick a optiplex 3010 for a customer and I made a interesting discovery while trying to dump the bios from a working unit. If you change the me_clr jumper from the normal 2_3 position, to 1_2 and boot the system up, you get a "warning service mode enabled press f1" and then you can continue to bootup. With this set, I was able to use flashrom to read out the entire flash chip (this may or may not be 100% true but will still help me) I am attaching 2 files that show the difference between the 2 jumper settings. After this weekend crisis with this customer pc, I am willing to try this jumper trick on other optiplexes I have if you wish, 360, 755? I think You guys helped me get a little further on this rescue and I appreciate the help and info over the yrs Sincerely Jason J Salopek aka "flyback" --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

[PATCH] Allow global disable of all drivers requiring libusb* or libpci
by Carl-Daniel Hailfinger 20 Feb '16

20 Feb '16

Usage: CONFIG_DISABLE_LIBUSB0_PROGRAMMERS=yes CONFIG_DISABLE_LIBUSB1_PROGRAMMERS=yes CONFIG_DISABLE_LIBPCI_PROGRAMMERS=yes Side note: This patch includes the patch to separate out raw access requirements from libpci requirements. If acked, I will commit separately. See [PATCH] Do not require PCI code for RayeR SPI driver for a changelog of that feature. Caveat: The following command line explodes based on moon phase and I have no idea why: make -j CONFIG_EVERYTHING=yes CONFIG_DISABLE_LIBUSB0_PROGRAMMERS=yes CONFIG_DISABLE_LIBUSB1_PROGRAMMERS=yes CONFIG_DISABLE_LIBPCI_PROGRAMMERS=yes Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-libpci_libusb_global_disable/Makefile =================================================================== --- flashrom-libpci_libusb_global_disable/Makefile (Revision 1926) +++ flashrom-libpci_libusb_global_disable/Makefile (Arbeitskopie) @@ -528,6 +528,34 @@ $(eval $(var)=yes))) endif +# Disable feature groups +ifeq ($(CONFIG_DISABLE_LIBUSB0_PROGRAMMERS), yes) +override CONFIG_PICKIT2_SPI = no +override CONFIG_DEDIPROG = no +endif +ifeq ($(CONFIG_DISABLE_LIBUSB1_PROGRAMMERS), yes) +override CONFIG_CH341A_SPI = no +override CONFIG_DEDIPROG = no +endif +ifeq ($(CONFIG_DISABLE_LIBPCI_PROGRAMMERS), yes) +override CONFIG_INTERNAL = no +override CONFIG_NIC3COM = no +override CONFIG_GFXNVIDIA = no +override CONFIG_SATASII = no +override CONFIG_ATAHPT = no +override CONFIG_ATAVIA = no +override CONFIG_ATAPROMISE = no +override CONFIG_IT8212 = no +override CONFIG_DRKAISER = no +override CONFIG_NICREALTEK = no +override CONFIG_NICNATSEMI = no +override CONFIG_NICINTEL = no +override CONFIG_NICINTEL_SPI = no +override CONFIG_NICINTEL_EEPROM = no +override CONFIG_OGP_SPI = no +override CONFIG_SATAMV = no +endif + # Bitbanging SPI infrastructure, default off unless needed. ifeq ($(CONFIG_RAYER_SPI), yes) override CONFIG_BITBANG_SPI = yes @@ -599,8 +627,7 @@ ifeq ($(CONFIG_RAYER_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1' PROGRAMMER_OBJS += rayer_spi.o -# Actually, NEED_LIBPCI is wrong. NEED_IOPORT_ACCESS would be more correct. -NEED_LIBPCI += CONFIG_RAYER_SPI +NEED_RAW_ACCESS += CONFIG_RAYER_SPI endif ifeq ($(CONFIG_PONY_SPI), yes) @@ -782,10 +809,14 @@ ifneq ($(NEED_LIBPCI), ) CHECK_LIBPCI = yes +# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually. +# libpci may need raw memory, MSR or PCI port I/O on some platforms. +# Individual drivers might have the same needs as well. +NEED_RAW_ACCESS += $(NEED_LIBPCI) FEATURE_CFLAGS += -D'NEED_PCI=1' FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'") -PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o +PROGRAMMER_OBJS += pcidev.o ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. PCILIBS += -lpciutils -lpci @@ -807,6 +838,11 @@ endif endif +ifneq ($(NEED_RAW_ACCESS), ) +FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1' +PROGRAMMER_OBJS += physmap.o hwaccess.o +endif + ifneq ($(NEED_LIBUSB0), ) CHECK_LIBUSB0 = yes FEATURE_CFLAGS += -D'NEED_LIBUSB0=1' @@ -992,7 +1028,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci headers."; \ + echo "Please install libpci headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE) @@ -1010,7 +1047,8 @@ $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \ echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci (package pciutils) and/or libz."; \ + echo "Please install libpci (package pciutils) and/or libz or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1022,7 +1060,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 headers or libusb-compat headers."; \ + echo "Please install libusb-0.1 headers or libusb-compat headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1030,7 +1069,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 or libusb-compat."; \ + echo "Please install libusb-0.1 or libusb-compat or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1042,7 +1082,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0 headers."; \ + echo "Please install libusb-1.0 headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1050,7 +1091,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0."; \ + echo "Please install libusb-1.0 or disable all features"; \ + echo "mentioned above by specifying make CONFIG_DISABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) Index: flashrom-libpci_libusb_global_disable/hwaccess.h =================================================================== --- flashrom-libpci_libusb_global_disable/hwaccess.h (Revision 1926) +++ flashrom-libpci_libusb_global_disable/hwaccess.h (Arbeitskopie) @@ -196,7 +196,7 @@ #define le_to_cpu32 cpu_to_le32 #define le_to_cpu64 cpu_to_le64 -#if NEED_PCI == 1 +#if NEED_RAW_ACCESS == 1 #if IS_X86 /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). @@ -376,6 +376,6 @@ #error Unknown architecture, please check if it supports PCI port IO. #endif /* IS_* */ -#endif /* NEED_PCI == 1 */ +#endif /* NEED_RAW_ACCESS == 1 */ #endif /* !__HWACCESS_H__ */

2 5

[commit] r1936 - trunk
by repository service 20 Feb '16

20 Feb '16

Author: hailfinger Date: Sat Feb 20 23:28:16 2016 New Revision: 1936 URL: http://flashrom.org/trac/flashrom/changeset/1936 Log: Allow global disable of all drivers requiring libusb* or libpci This is especially helpful for compile tests with CONFIG_EVERYTHING=yes, but can also be used without CONFIG_EVERYTHING. Usage: make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Feb 20 23:04:39 2016 (r1935) +++ trunk/Makefile Sat Feb 20 23:28:16 2016 (r1936) @@ -542,6 +542,33 @@ $(eval $(var)=yes))) endif +# Disable feature groups +ifeq ($(CONFIG_ENABLE_LIBUSB0_PROGRAMMERS), no) +override CONFIG_PICKIT2_SPI = no +endif +ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no) +override CONFIG_CH341A_SPI = no +override CONFIG_DEDIPROG = no +endif +ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) +override CONFIG_INTERNAL = no +override CONFIG_NIC3COM = no +override CONFIG_GFXNVIDIA = no +override CONFIG_SATASII = no +override CONFIG_ATAHPT = no +override CONFIG_ATAVIA = no +override CONFIG_ATAPROMISE = no +override CONFIG_IT8212 = no +override CONFIG_DRKAISER = no +override CONFIG_NICREALTEK = no +override CONFIG_NICNATSEMI = no +override CONFIG_NICINTEL = no +override CONFIG_NICINTEL_SPI = no +override CONFIG_NICINTEL_EEPROM = no +override CONFIG_OGP_SPI = no +override CONFIG_SATAMV = no +endif + # Bitbanging SPI infrastructure, default off unless needed. ifeq ($(CONFIG_RAYER_SPI), yes) override CONFIG_BITBANG_SPI = yes @@ -1018,7 +1045,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci headers."; \ + echo "Please install libpci headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE) @@ -1036,7 +1064,8 @@ $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \ echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci (package pciutils) and/or libz."; \ + echo "Please install libpci (package pciutils) and/or libz or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1048,7 +1077,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 headers or libusb-compat headers."; \ + echo "Please install libusb-0.1 headers or libusb-compat headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1056,7 +1086,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 or libusb-compat."; \ + echo "Please install libusb-0.1 or libusb-compat or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1068,7 +1099,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0 headers."; \ + echo "Please install libusb-1.0 headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1076,7 +1108,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0."; \ + echo "Please install libusb-1.0 or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)

1 0

[PATCH] Automatically disable atapromise on non-x86
by Carl-Daniel Hailfinger 20 Feb '16

20 Feb '16

We do not support PCI port I/O on non-x86 (yet). Atapromise needs PCI port I/O. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-atapromise_x86_only/Makefile =================================================================== --- flashrom-atapromise_x86_only/Makefile (Revision 1933) +++ flashrom-atapromise_x86_only/Makefile (Arbeitskopie) @@ -387,6 +387,11 @@ else override CONFIG_ATAHPT = no endif +ifeq ($(CONFIG_ATAPROMISE), yes) +UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes +else +override CONFIG_ATAPROMISE = no +endif ifeq ($(CONFIG_SATAMV), yes) UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes else

2 2

[commit] r1935 - trunk
by repository service 20 Feb '16

20 Feb '16

Author: hailfinger Date: Sat Feb 20 23:04:39 2016 New Revision: 1935 URL: http://flashrom.org/trac/flashrom/changeset/1935 Log: Automatically disable atapromise on non-x86 We do not support PCI port I/O on non-x86 (yet). Atapromise needs PCI port I/O. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Feb 20 22:43:56 2016 (r1934) +++ trunk/Makefile Sat Feb 20 23:04:39 2016 (r1935) @@ -396,6 +396,11 @@ else override CONFIG_ATAHPT = no endif +ifeq ($(CONFIG_ATAPROMISE), yes) +UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes +else +override CONFIG_ATAPROMISE = no +endif ifeq ($(CONFIG_SATAMV), yes) UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes else

1 0

[PATCH] Do not require PCI code for RayeR SPI driver
by Carl-Daniel Hailfinger 20 Feb '16

20 Feb '16

This patch depends on Re: [flashrom] [PATCH] List affected features for missing libraries CONFIG_RAYER_SPI only needs raw hardware access, but not libpci. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> diff -ur flashrom-libpci_libusb_report_requirements/hwaccess.h flashrom-rayer_do_not_require_libpci/hwaccess.h --- flashrom-libpci_libusb_report_requirements/hwaccess.h 2016-02-17 00:26:07.221475948 +0100 +++ flashrom-rayer_do_not_require_libpci/hwaccess.h 2016-02-17 01:09:53.270497512 +0100 @@ -196,7 +196,7 @@ #define le_to_cpu32 cpu_to_le32 #define le_to_cpu64 cpu_to_le64 -#if NEED_PCI == 1 +#if NEED_RAW_ACCESS == 1 #if IS_X86 /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). @@ -376,6 +376,6 @@ #error Unknown architecture, please check if it supports PCI port IO. #endif /* IS_* */ -#endif /* NEED_PCI == 1 */ +#endif /* NEED_RAW_ACCESS == 1 */ #endif /* !__HWACCESS_H__ */ diff -ur flashrom-libpci_libusb_report_requirements/Makefile flashrom-rayer_do_not_require_libpci/Makefile --- flashrom-libpci_libusb_report_requirements/Makefile 2016-02-17 00:26:37.497626067 +0100 +++ flashrom-rayer_do_not_require_libpci/Makefile 2016-02-17 00:52:46.457405821 +0100 @@ -599,8 +599,7 @@ ifeq ($(CONFIG_RAYER_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1' PROGRAMMER_OBJS += rayer_spi.o -# Actually, NEED_LIBPCI is wrong. NEED_IOPORT_ACCESS would be more correct. -NEED_LIBPCI += CONFIG_RAYER_SPI +NEED_RAW_ACCESS += CONFIG_RAYER_SPI endif ifeq ($(CONFIG_PONY_SPI), yes) @@ -782,10 +781,14 @@ ifneq ($(NEED_LIBPCI), ) CHECK_LIBPCI = yes +# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually. +# libpci may need raw memory, MSR or PCI port I/O on some platforms. +# Individual drivers might have the same needs as well. +NEED_RAW_ACCESS += $(NEED_LIBPCI) FEATURE_CFLAGS += -D'NEED_PCI=1' FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'") -PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o +PROGRAMMER_OBJS += pcidev.o ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. PCILIBS += -lpciutils -lpci @@ -807,6 +810,11 @@ endif endif +ifneq ($(NEED_RAW_ACCESS), ) +FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1' +PROGRAMMER_OBJS += physmap.o hwaccess.o +endif + ifneq ($(NEED_LIBUSB0), ) CHECK_LIBUSB0 = yes FEATURE_CFLAGS += -D'NEED_LIBUSB0=1'

2 7

[commit] r1934 - trunk
by repository service 20 Feb '16

20 Feb '16

Author: hailfinger Date: Sat Feb 20 22:43:56 2016 New Revision: 1934 URL: http://flashrom.org/trac/flashrom/changeset/1934 Log: Do not require PCI code for RayeR SPI driver CONFIG_RAYER_SPI only needs raw hardware access, but not libpci. Disable CONFIG_RAYER_SPI on Android because of missing inb/outb. Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O and MSR access. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile trunk/hwaccess.h Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Feb 20 21:53:46 2016 (r1933) +++ trunk/Makefile Sat Feb 20 22:43:56 2016 (r1934) @@ -349,6 +349,15 @@ endif endif +ifeq ($(TARGET_OS), Android) +# Android on x86 (currently) does not provide raw PCI port I/O operations +ifeq ($(CONFIG_RAYER_SPI), yes) +UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes +else +override CONFIG_RAYER_SPI = no +endif +endif + ############################################################################### # General architecture-specific settings. # Like above for the OS, below we verify user-supplied options depending on the target architecture. @@ -599,8 +608,7 @@ ifeq ($(CONFIG_RAYER_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1' PROGRAMMER_OBJS += rayer_spi.o -# Actually, NEED_LIBPCI is wrong. NEED_IOPORT_ACCESS would be more correct. -NEED_LIBPCI += CONFIG_RAYER_SPI +NEED_RAW_ACCESS += CONFIG_RAYER_SPI endif ifeq ($(CONFIG_PONY_SPI), yes) @@ -782,19 +790,31 @@ ifneq ($(NEED_LIBPCI), ) CHECK_LIBPCI = yes +# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually. +# libpci may need raw memory, MSR or PCI port I/O on some platforms. +# Individual drivers might have the same needs as well. +NEED_RAW_ACCESS += $(NEED_LIBPCI) FEATURE_CFLAGS += -D'NEED_PCI=1' FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'") -PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o +PROGRAMMER_OBJS += pcidev.o ifeq ($(TARGET_OS), NetBSD) # The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci. PCILIBS += -lpciutils -lpci -# For (i386|x86_64)_iopl(2). -PCILIBS += -l$(shell uname -p) else - PCILIBS += -lpci +endif +endif +ifneq ($(NEED_RAW_ACCESS), ) +# Raw memory, MSR or PCI port I/O access. +FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1' +PROGRAMMER_OBJS += physmap.o hwaccess.o + +ifeq ($(TARGET_OS), NetBSD) +# For (i386|x86_64)_iopl(2). +PCILIBS += -l$(shell uname -p) +else ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). PCILIBS += -l$(shell uname -m) @@ -805,6 +825,7 @@ endif endif endif + endif ifneq ($(NEED_LIBUSB0), ) Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Sat Feb 20 21:53:46 2016 (r1933) +++ trunk/hwaccess.h Sat Feb 20 22:43:56 2016 (r1934) @@ -196,7 +196,7 @@ #define le_to_cpu32 cpu_to_le32 #define le_to_cpu64 cpu_to_le64 -#if NEED_PCI == 1 +#if NEED_RAW_ACCESS == 1 #if IS_X86 /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). @@ -230,6 +230,7 @@ * out[bwl] definitions in machine/cpufunc.h and sys/io.h at least in some * versions. Use machine/cpufunc.h only for plain FreeBSD/DragonFlyBSD. */ + #include <sys/types.h> #include <machine/cpufunc.h> #define OUTB(x, y) do { u_int outb_tmp = (y); outb(outb_tmp, (x)); } while (0) #define OUTW(x, y) do { u_int outw_tmp = (y); outw(outw_tmp, (x)); } while (0) @@ -382,6 +383,6 @@ #error Unknown architecture, please check if it supports PCI port IO. #endif /* IS_* */ -#endif /* NEED_PCI == 1 */ +#endif /* NEED_RAW_ACCESS == 1 */ #endif /* !__HWACCESS_H__ */

1 0

Re: [flashrom] [PATCH] dediprog: tremendously improve performance on SF600 by ignoring the spec.
by Stefan Tauner 20 Feb '16

20 Feb '16

On Sat, 20 Feb 2016 01:02:57 +0100 Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > The solution was discovered in a collaborative bug hunt with testing done by > David Hendricks. The actual culprit was found by Urja Rannikko by comparing > my patch for vanilla flashrom with David's version in chromiumos. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Essentially this was tested already yesternight by David therefore I self-acked and committed it in r1933. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1933 - trunk
by repository service 20 Feb '16

20 Feb '16

Author: stefanct Date: Sat Feb 20 21:53:46 2016 New Revision: 1933 URL: http://flashrom.org/trac/flashrom/changeset/1933 Log: dediprog: tremendously improve performance on SF600 by ignoring the spec. The solution was discovered in a collaborative bug hunt with testing done by David Hendricks. The actual culprit was found by Urja Rannikko by comparing vanilla flashrom with David's version in chromiumos. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Tested-by: David Hendricks <dhendrix(a)chromium.org> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/dediprog.c Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Sat Feb 20 21:21:58 2016 (r1932) +++ trunk/dediprog.c Sat Feb 20 21:53:46 2016 (r1933) @@ -694,6 +694,14 @@ if (readcnt == 0) // If we don't require a response, we are done here return 0; + /* The specifications do state the possibility to set a timeout for transceive transactions. + * Apparently the "timeout" is a delay, and you can use long delays to accelerate writing - in case you + * can predict the time needed by the previous command or so (untested). In any case, using this + * "feature" to set sane-looking timouts for the read below will completely trash performance with + * SF600 and/or firmwares >= 6.0 while they seem to be benign on SF100 with firmwares <= 5.5.2. *shrug* + * + * The specification also uses only 0 in its examples, so the lesson to learn here: + * "Never trust the description of an interface in the documentation but use the example code and pray." const uint8_t read_timeout = 10 + readcnt/512; if (is_new_prot()) { idx = 0; @@ -703,6 +711,8 @@ value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here } ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt); + */ + ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt); if (ret != readcnt) { msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret)); return 1;

1 0

Re: [flashrom] [PATCH] Include sys/glibc-syscalls.h instead of inexistent sys/io.h on Android.
by Carl-Daniel Hailfinger 20 Feb '16

20 Feb '16

On 20.02.2016 11:23, Stefan Tauner wrote: > This won't make raw I/O work magically but at least it would provide iopl() > if some driver requires it and there is no better alternative currently. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> > --- > hwaccess.h | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/hwaccess.h b/hwaccess.h > index 29a29b0..f1ad807 100644 > --- a/hwaccess.h > +++ b/hwaccess.h > @@ -203,8 +203,14 @@ cpu_to_be(64) > > /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). > * It is included in glibc (thus available also on debian/kFreeBSD) but also in other libcs that mimic glibc, > - * e.g. musl and uclibc. */ > -#if defined(__linux__) || defined(__GLIBC__) > + * e.g. musl and uclibc. Because we cannot detect the clib or existence of the header or of the instructions Please use "libc" instead of "clib". > + * themselves safely in here we need some heuristic below: > + * On Android we don't have the header and no way for I/O port access at all. However, sys/glibc-syscalls.h > + * refers to an iopl implementation and we therefore include at least that one for now. On non-Android we assume > + * that a Linux system's libc has a suitable sys/io.h or we depend on glibc to offer it. */ > +#if defined(__ANDROID__) > +#include <sys/glibc-syscalls.h> > +#elif defined(__linux__) || defined(__GLIBC__) > #include <sys/io.h> > #endif > Apart from the comment above, this is Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel

2 1

[commit] r1932 - trunk
by repository service 20 Feb '16

20 Feb '16

Author: stefanct Date: Sat Feb 20 21:21:58 2016 New Revision: 1932 URL: http://flashrom.org/trac/flashrom/changeset/1932 Log: Include sys/glibc-syscalls.h instead of inexistent sys/io.h on Android. This won't make raw I/O work magically but at least it would provide iopl() if some driver requires it and there is no better alternative currently. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/hwaccess.h Modified: trunk/hwaccess.h ============================================================================== --- trunk/hwaccess.h Fri Feb 19 09:17:24 2016 (r1931) +++ trunk/hwaccess.h Sat Feb 20 21:21:58 2016 (r1932) @@ -201,8 +201,14 @@ /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). * It is included in glibc (thus available also on debian/kFreeBSD) but also in other libcs that mimic glibc, - * e.g. musl and uclibc. */ -#if defined(__linux__) || defined(__GLIBC__) + * e.g. musl and uclibc. Because we cannot detect the libc or existence of the header or of the instructions + * themselves safely in here we use some heuristic below: + * On Android we don't have the header file and no way for I/O port access at all. However, sys/glibc-syscalls.h + * refers to an iopl implementation and we therefore include at least that one for now. On non-Android we assume + * that a Linux system's libc has a suitable sys/io.h or (on non-Linux) we depend on glibc to offer it. */ +#if defined(__ANDROID__) +#include <sys/glibc-syscalls.h> +#elif defined(__linux__) || defined(__GLIBC__) #include <sys/io.h> #endif

1 0

[PATCH] Include sys/glibc-syscalls.h instead of inexistent sys/io.h on Android.
by Stefan Tauner 20 Feb '16

20 Feb '16

This won't make raw I/O work magically but at least it would provide iopl() if some driver requires it and there is no better alternative currently. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- hwaccess.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/hwaccess.h b/hwaccess.h index 29a29b0..f1ad807 100644 --- a/hwaccess.h +++ b/hwaccess.h @@ -203,8 +203,14 @@ cpu_to_be(64) /* sys/io.h provides iopl(2) and x86 I/O port access functions (inb, outb etc). * It is included in glibc (thus available also on debian/kFreeBSD) but also in other libcs that mimic glibc, - * e.g. musl and uclibc. */ -#if defined(__linux__) || defined(__GLIBC__) + * e.g. musl and uclibc. Because we cannot detect the clib or existence of the header or of the instructions + * themselves safely in here we need some heuristic below: + * On Android we don't have the header and no way for I/O port access at all. However, sys/glibc-syscalls.h + * refers to an iopl implementation and we therefore include at least that one for now. On non-Android we assume + * that a Linux system's libc has a suitable sys/io.h or we depend on glibc to offer it. */ +#if defined(__ANDROID__) +#include <sys/glibc-syscalls.h> +#elif defined(__linux__) || defined(__GLIBC__) #include <sys/io.h> #endif -- Kind regards, Stefan Tauner

1 0

[PATCH] dediprog: tremendously improve performance on SF600 by ignoring the spec.
by Stefan Tauner 20 Feb '16

20 Feb '16

The solution was discovered in a collaborative bug hunt with testing done by David Hendricks. The actual culprit was found by Urja Rannikko by comparing my patch for vanilla flashrom with David's version in chromiumos. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- dediprog.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/dediprog.c b/dediprog.c index 454a72d..6a9b9ae 100644 --- a/dediprog.c +++ b/dediprog.c @@ -694,6 +694,14 @@ static int dediprog_spi_send_command(struct flashctx *flash, if (readcnt == 0) // If we don't require a response, we are done here return 0; + /* The specifications do state the possibility to set a timeout for transceive transactions. + * Apparently the "timeout" is a delay, and you can use long delays to accelerate writing - in case you + * can predict the time needed by the previous command or so (untested). In any case, using this + * "feature" to set sane-looking timouts for the read below will completely trash performance with + * SF600 and/or firmwares >= 6.0 while they seem to be benign on SF100 with firmwares <= 5.5.2. *shrug* + * + * The specification also uses only 0 in its examples, so the lesson to learn here: + * "Never trust the description of an interface in the documentation but use the example code and pray." const uint8_t read_timeout = 10 + readcnt/512; if (is_new_prot()) { idx = 0; @@ -703,6 +711,8 @@ static int dediprog_spi_send_command(struct flashctx *flash, value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here } ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt); + */ + ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt); if (ret != readcnt) { msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret)); return 1; -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Makefile: fix overriding of make command line arguments.
by Carl-Daniel Hailfinger 19 Feb '16

19 Feb '16

On 18.02.2016 22:19, Stefan Tauner wrote: > Command line arguments given when executing make should not stop us > from setting commonly user-configurable variables like CPPFLAGS or > LDFLAGS. > Without this patch 'make CPPFLAGS="-Ifail"' would fail to find > libusb1 headers and abort. > Add override statements where we append mandatory options to > these variables to make (Debian) packagers more happy. > > Also, r1920 introduced some explicit calls to pkg-config instead of > $(PKG_CONFIG). This patch corrects that as well. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> You missed one instance: CFLAGS += -Wno-format Even if compiling for DOS is probably not something where default packaging is involved, it would make the whole *FLAGS thing more consistent. Other than that, it's Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel

2 1

[commit] r1931 - trunk
by repository service 19 Feb '16

19 Feb '16

Author: stefanct Date: Fri Feb 19 09:17:24 2016 New Revision: 1931 URL: http://flashrom.org/trac/flashrom/changeset/1931 Log: Makefile: fix overriding of make command line arguments. Command line arguments given when executing make should not stop us from setting commonly user-configurable variables like CPPFLAGS or LDFLAGS. Without this patch 'make CPPFLAGS="-Ifail"' would fail to find libusb1 headers and abort. Add override statements where we append mandatory options to these variables to make (Debian) packagers more happy. Also, r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that as well. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Feb 19 00:11:52 2016 (r1930) +++ trunk/Makefile Fri Feb 19 09:17:24 2016 (r1931) @@ -67,14 +67,14 @@ endif ifdef LIBS_BASE -CPPFLAGS += -I$(LIBS_BASE)/include -LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig +override CPPFLAGS += -I$(LIBS_BASE)/include +override LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib endif ifeq ($(CONFIG_STATIC),yes) -PKG_CONFIG += --static -LDFLAGS += -static +override PKG_CONFIG += --static +override LDFLAGS += -static endif # Set LC_ALL=C to minimize influences of the locale. @@ -112,34 +112,34 @@ override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) ifeq ($(TARGET_OS), Darwin) -CPPFLAGS += -I/opt/local/include -I/usr/local/include -LDFLAGS += -L/opt/local/lib -L/usr/local/lib +override CPPFLAGS += -I/opt/local/include -I/usr/local/include +override LDFLAGS += -L/opt/local/lib -L/usr/local/lib endif ifeq ($(TARGET_OS), FreeBSD) -CPPFLAGS += -I/usr/local/include -LDFLAGS += -L/usr/local/lib +override CPPFLAGS += -I/usr/local/include +override LDFLAGS += -L/usr/local/lib endif ifeq ($(TARGET_OS), OpenBSD) -CPPFLAGS += -I/usr/local/include -LDFLAGS += -L/usr/local/lib +override CPPFLAGS += -I/usr/local/include +override LDFLAGS += -L/usr/local/lib endif ifeq ($(TARGET_OS), NetBSD) -CPPFLAGS += -I/usr/pkg/include -LDFLAGS += -L/usr/pkg/lib +override CPPFLAGS += -I/usr/pkg/include +override LDFLAGS += -L/usr/pkg/lib endif ifeq ($(TARGET_OS), DragonFlyBSD) -CPPFLAGS += -I/usr/local/include -LDFLAGS += -L/usr/local/lib +override CPPFLAGS += -I/usr/local/include +override LDFLAGS += -L/usr/local/lib endif ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe # DJGPP has odd uint*_t definitions which cause lots of format string warnings. -CFLAGS += -Wno-format +override CFLAGS += -Wno-format LIBS += -lgetopt # Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support). ifeq ($(CONFIG_BUSPIRATE_SPI), yes) @@ -821,11 +821,11 @@ USB1LIBS += -lusb else ifeq ($(TARGET_OS),NetBSD) -CPPFLAGS += -I/usr/pkg/include/libusb-1.0 +override CPPFLAGS += -I/usr/pkg/include/libusb-1.0 USB1LIBS += -lusb-1.0 else -USB1LIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; pkg-config --libs libusb-1.0 || printf "%s" "-lusb-1.0") -CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; pkg-config --cflags-only-I libusb-1.0 || printf "%s" "-I/usr/include/libusb-1.0") +USB1LIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libusb-1.0 || printf "%s" "-lusb-1.0") +override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libusb-1.0 || printf "%s" "-I/usr/include/libusb-1.0") endif endif endif

1 0

about GIGABYTE GA-X58A-UD3R board
by げんまいこ 19 Feb '16

19 Feb '16

Hi, I have read this article http://www.coreboot.org/FAQ#Will_coreboot_work_on_my_machine.3F And I will send my Step1-6. Step 1: board vendor : GIGABYTE board name : GA-X58A-UD3R (rev. 2.0) CPU : Core™ i7-990X northbridge : Intel® X58 Express Chipset southbridge : South Bridge: Intel® ICH10R optionally : Realtek RTL8111E chip (10/100/1000 Mbit) storage : Marvell 9128 chip GIGABYTE SATA2 chip JMicron JMB362 chip iTE IT8720 chip USB3.0 : NEC chip IEEE 1394 : T.I. TSB43AB23 chip I/Ocontrol : iTE IT8720 chip Step 2: $ lspci -tvnn -+-[0000:3f]-+-00.0 Intel Corporation Device [8086:2c71] | +-00.1 Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] | +-02.0 Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] | +-02.1 Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] | +-02.2 Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] | +-02.3 Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] | +-03.0 Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] | +-03.1 Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] | +-03.4 Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] | +-04.0 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] | +-04.1 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] | +-04.2 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] | +-04.3 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] | +-05.0 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] | +-05.1 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] | +-05.2 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] | +-05.3 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] | +-06.0 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] | +-06.1 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] | +-06.2 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] | \-06.3 Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] \-[0000:00]-+-00.0 Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] +-01.0-[01]----00.0 Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller [1b4b:9128] +-02.0-[02]----00.0 NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] +-03.0-[03]--+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] Cayman PRO [Radeon HD 6950] [1002:6719] | \-00.1 Advanced Micro Devices, Inc. [AMD/ATI] Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] [1002:aa80] +-10.0 Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] +-10.1 Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] +-11.0 Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 [8086:3427] +-11.1 Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 [8086:3428] +-13.0 Intel Corporation 7500/5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller [8086:342d] +-14.0 Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] +-14.1 Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] +-14.2 Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] +-15.0 Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers [8086:342f] +-1a.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] +-1a.1 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] +-1a.2 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] +-1a.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] +-1c.0-[04]----00.0 Creative Labs EMU20k2 [X-Fi Titanium Series] [1102:000b] +-1c.1-[05]--+-00.0 JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] | \-00.1 JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] +-1c.4-[06]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] +-1d.0 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] +-1d.1 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] +-1d.2 Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] +-1d.7 Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] +-1e.0-[07]-- +-1f.0 Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] +-1f.2 Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] +-1f.3 Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] \-1f.5 Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] Step 3: $ superiotool -dV superiotool r6543 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Found ITE IT8720F (id=0x8720, rev=0x8) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 20 08 00 00 00 def 87 20 05 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 00 00 00 00 04 00 80 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 50 def 00 03 f8 04 00 50 LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 50 def 00 02 f8 03 00 50 LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 00 00 00 00 00 00 04 08 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 80 00 0a 80 81 00 ff def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 48 def 01 00 60 00 64 01 02 48 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 e5 e6 e7 e9 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff val e0 ff 3e 00 80 00 81 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 81 5e 2e 40 00 81 10 0c 40 00 00 00 00 00 00 00 00 00 27 10 40 00 00 00 0d 1c 00 00 00 00 00 ff 00 00 00 def 00 ff 00 40 00 00 03 00 00 00 00 00 00 00 00 NA 38 00 00 00 00 00 00 00 20 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 NA 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 00 00 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 06 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x164e... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O at 0x164e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x2e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x4e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. Probing for Server Engines Super I/O at 0x2e... Failed. Returned data: id=0xffff, rev=0xff Step 4: $ sudo flashrom -p internal -V flashrom v0.9.8-r1930 on Linux 4.3.5-1-ck (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.4.0, GCC 5.3.0, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 1787M loops per second, 10 myus = 23 us, 100 myus = 174 us, 1000 myus = 2249 us, 10000 myus = 12008 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "X58A-UD3R" DMI string system-version: " " DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "X58A-UD3R" DMI string baseboard-version: "x.x" Found ITE Super I/O, ID 0x8720 on port 0x2e Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0x464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap: not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching disabled, caching enabled, BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007fde17fcd000 + 0x3800 0x04: 0x0000 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=0, SCIP=0, FDOPSS=0, FDV=0, FLOCKDN=0 Programming OPCODES... done 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x007f44 (SSFC) SSFC: SCGO=0, ACS=1, SPOP=0, COP=4, DBC=63, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) OK. No IT87* serial flash segment enabled. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESI ES25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESI ES25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ESI ES25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25LQ128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605" (2048 kB, SPI) mapped at physical address 0x00000000ffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605A/MX25L1606E/MX25L1608E" (2048 kB, SPI) mapped at physical address 0x00000000ffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Found Macronix flash chip "MX25L1605D/MX25L1608D/MX25L1673E" (2048 kB, SPI) mapped at physical address 0x00000000ffe00000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6405D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L12805D, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6495F, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LQ020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LQ040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LQ080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LQ016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LQ032C, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL127S-64kB, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL127S-256kB, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25WF020A, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Unknown SFDP-capable chip, 0 kB: Length of the mandatory JEDEC SFDP parameter table is wrong (8 B), skipping it. SFDP Parameter Table 1 supposedly overflows addressable SFDP area. This most probably indicates a corrupt SFDP parameter table header. Skipping it. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x14 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x0f, id2 0xd5, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xfa, id2 0x2f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xe8, id2 0x02, id1 parity violation, id1 is normal flash content, id2 is normal flash content Multiple flash chip definitions match the detected chip(s): "MX25L1605", "MX25L1605A/MX25L1606E/MX25L1608E", "MX25L1605D/MX25L1608D/MX25L1673E" Please specify which chip definition to use with the -c <chipname> option. Restoring MMIO space at 0x7fde17fd089c Restoring MMIO space at 0x7fde17fd0898 Restoring MMIO space at 0x7fde17fd0896 Restoring MMIO space at 0x7fde17fd0894 Restoring PCI config space for 00:1f:0 reg 0xdc Step 5: http://www.gigabyte.com/products/product-page.aspx?pid=3449#sp Step 6: Any other relevant information you can provide. hmm, I don't know what to provide, and I don't know programing at all. So I cheer you, developers! thanks for developing!

1 0

Re: [flashrom] [PATCH] fix chip size limiting in atapromise
by Carl-Daniel Hailfinger 19 Feb '16

19 Feb '16

On 17.01.2016 12:51, Joseph C. Lehner wrote: > Just tested it, programmer is still working on my Ultra100! > > Regards, > Joseph On 18.02.2016 22:21, Urja Rannikko wrote: > Seems fine (i built it etc) except for one tiny nitpick noticed by git > (or i think a default commit hook, but whatever) below. > > On Sun, Jan 17, 2016 at 2:57 AM, Carl-Daniel Hailfinger > <c-d.hailfinger.devel.2006(a)gmx.net> wrote: >> Atapromise chip size limiting has two bugs I didn't catch during review, >> but only in the moment of commit. >> >> The current code is checking model_id to remember if a chip has already >> been limited, but if flashchips.c contains two subsequent chips with >> different vendor_id but identical model_id the adjustment will not be >> done. Switch to checking the chip size instead. >> >> If a chip has multiple whole-chip erase functions, only one will be >> modified. Fix that. >> >> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> >> >> Index: flashrom-atapromise_fix_limit_chip/atapromise.c >> =================================================================== >> --- flashrom-atapromise_fix_limit_chip/atapromise.c (Revision 1916) >> +++ flashrom-atapromise_fix_limit_chip/atapromise.c (Arbeitskopie) >> @@ -79,38 +79,35 @@ >> [...] >> - if (i != NUM_ERASEFUNCTIONS) { >> - chip->total_size = rom_size / 1024; >> - if (chip->page_size > rom_size) >> - chip->page_size = rom_size; >> + /* Chip is small enough or already limited. */ >> + if (size <= rom_size) >> + return; > ^ That line has a mix of spaces (first) and a tab... rest of the > function seems to be tabs, so fix with spaces=>tab seems appropriate. > > > So with that fixed, this is: > Acked-by: Urja Rannikko <urjaman(a)gmail.com> Thanks for the tests and the review! Fixed the whitespace and committed in r1930. Regards, Carl-Daniel

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom