- flashrom - mail.coreboot.org

Board enable for EPoX EP-8RDA3+
by . . 16 Sep '09

16 Sep '09

Hi, Problem is chip not being able to be flashed, looks write-protected. No write-enable jumpers or options in BIOS setup. Here are the requested info's: Motherboard: EPoX EP-8RDA3+ (Rev 2.1) BIOS download location: http://www.epox.ru/downloads.php?file=/data/download/bios/8rd34729.bin lspci -nnvvvxxx output: ---start--- 00:00.0 Host bridge [0600]: nVidia Corporation nForce2 AGP (different version?) [10de:01e0] (rev c1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00: de 10 6c 00 07 01 a0 00 a3 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 70 c0 80 82 20: 00 e2 f0 e3 00 50 20 50 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 04 40: 00 00 00 00 01 00 02 00 01 00 00 00 08 0b 05 00 50: 0c 0d fe 3f 0e 0f 00 00 7f 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: EPoX Computer Co., Ltd. Unknown device [1695:1000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00: de 10 e8 01 07 01 20 02 c1 00 04 06 00 20 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 20 f0 00 20 22 20: 00 e0 f0 e1 00 d8 f0 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00 40: 01 00 00 00 00 00 f0 3f 20 00 00 00 ff ff ff ff 50: 00 00 00 d0 00 f0 ff d7 ff ff ff ff ff ff ff ff 60: ff 40 ff 60 00 00 00 20 00 00 00 00 ff ff ff ff 70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff 80: ff ff ff ff 00 80 00 00 68 01 00 00 ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 17 02 00 1f ff ff ff ff ff ff ff ff ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 01:06.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) Subsystem: Silicon Image, Inc. Unknown device [1095:7114] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00: de 10 50 01 07 00 b0 02 a4 00 00 03 00 20 00 00 10: 00 00 00 e0 08 00 00 d8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2b 40 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01 40: 43 10 2b 40 02 00 20 00 17 00 00 1f 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 01 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ---end--- flashrom -V output: ---start--- flashrom v0.9.1-r719 No coreboot table found. Found chipset "NVIDIA NForce2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 614M loops per second, 100 myus = 201 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xda, id2 0x3d Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xda, id2 0x3d Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for Intel 28F001BX-B, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Intel 28F001BX-T, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xda, id2 0x3d Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xda, id2 0x3d Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xda, id2 0x3d Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xda, id2 0x3d Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xda, id2 0x3d Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x47, id2 0xff Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x47, id2 0xff Probing for PMC Pm39LV010, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x49, id2 0x4d Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x49, id2 0x4d Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x3d Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x3d Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x47, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for TI TMS29F002RB, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for TI TMS29F002RT, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xda, id2 0x3d Found chip "Winbond W39V040A" (512 KB, LPC) at physical address 0xfff80000. Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xda, id2 0x3d Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xda, id2 0x3d Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. ---end--- superiotool -dV output: ---start--- superiotool r4623 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x80fe, id=0x1752 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x5217, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0x00, port+1=0x00 Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x17) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 28 29 2a 2b 2c 2e 2f val ff 52 17 ff fe 80 00 00 00 00 7c c0 ff 00 ff def 00 52 NA ff 00 MM 00 00 00 00 7c c0 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 04 38 def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 00 80 def 01 00 60 00 64 01 0c 80 LDN 0x06 (Consumer IR) idx 30 60 61 70 val 00 00 00 00 def 00 00 00 00 LDN 0x07 (Game port, MIDI port, GPIO 1) idx 30 60 61 62 63 70 f0 f1 f2 val 07 02 01 03 30 0a ff 00 00 def 00 02 01 03 30 09 ff 00 00 LDN 0x08 (GPIO 2, watchdog timer) idx 30 f0 f1 f2 f3 f5 f6 f6 f7 val 01 ff 07 01 00 00 00 00 00 def 00 ff 00 00 00 00 00 00 00 LDN 0x09 (GPIO 3) idx 30 f0 f1 f2 f3 val 01 ff 00 00 40 def 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 40 03 14 00 00 00 00 00 00 af 37 04 00 00 00 00 00 def 00 00 00 00 NA NA 00 00 00 00 00 00 00 00 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 val 01 02 90 00 00 def 00 00 00 00 00 Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff ---end--- Thanks, Anol. _________________________________________________________________ Drag n’ drop—Get easy photo sharing with Windows Live™ Photos. http://www.microsoft.com/windows/windowslive/products/photos.aspx

2 1

Fwd: spi programmer the haxor way
by Urja Rannikko 14 Sep '09

14 Sep '09

Okay, just for fun an image of an emergency SPI programmer - ATtiny2313 as an RS232-SPI bridge - did 38400 baud serial, 4Mhz SPI - was very slow ... 2h+ for programming a 16MBit SPI flash - the ATtiny and the SPI chip were powered by two 1.5V D size batteries (covered in electrical tape) - the RS232 line lever converter was powered by the 5V regulator on board ... ---------- Forwarded message ---------- From: <0451383440(a)netti.fi> Date: Sun, Sep 13, 2009 at 20:57 Subject: spi programmer the haxor way To: nixuman(a)gmail.com Cc: urjaman(a)gmail.com -- urjaman

1 0

multiple spi chips and controllers question
by Andriy Gapon 12 Sep '09

12 Sep '09

[Subject line continuation: Gigabyte motherboard with DualBIOS] Result of 'flashrom -V' on my machine: flashrom v0.9.1-r710 No coreboot table found. Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=0, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Disabling flash write protection for board "GIGABYTE GA-MA78GM-S2H"... Serial flash segment 0xfffe0000-0xffffffff enabled Serial flash segment 0x000e0000-0x000fffff enabled Serial flash segment 0xffee0000-0xffefffff disabled Serial flash segment 0xfff80000-0xfffeffff enabled LPC write to serial flash enabled Serial flash pin 29 Serial flash port 0x0238 OK. [...] Probing for SST SST25VF080B, 1024 KB: RDID returned 0xbf 0x25 0x8e. probe_spi_rdid_generic: id1 0xbf, id2 0x258e Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000. [...] First, one note: shouldn't there be a new line after '-S2H"...' and before 'Serial'? Second, an easy question - what does the following line means? Serial flash segment 0xffee0000-0xffefffff disabled Does it mean that LPC cycles for that address range won't reach SPI flash neither for reading nor for writing? And so I won't be able to flash some part of the chip? Or is it something else? Third, the main question. I understand that SB700 has an embedded SPI controller and flashrom first discovers it and prints its configuration. There is also IT8718S chip on this motherboard which has SPI controller as well, and it looks like flashrom also discovers it. Q: which controller flashrom uses next to discover the SPI flash chip? The reason I am asking - this mainboard has Gigabyte DualBIOS feature ("non-virtual"), and there are two physical SPI flash chips on the board. I am curious as to how they are wired. Are they wired to different controllers? Or the same one - then which one? Can I access both of them? Does anybody know about that or has a reasonable guess? Thank you very much in advance! And sorry for so many question marks. -- Andriy Gapon

1 1

Re: [flashrom] Trial of ARIMA:HDAMA Motherboard
by David Hendricks 10 Sep '09

10 Sep '09

Interesting... I don't have an answer, unfortunately, but I have used Flashrom successfully on the HDAMA in the past. Can you try checking out a very old version of Flashrom, like from back when it was in coreboot-v2/util/? I'm thinking wayyyyy back, like at around svn revision 2000 in the 2005-2006 timeframe. Maybe there was some regression that never got caught.

1 0

Re: [flashrom] Trial of ARIMA:HDAMA Motherboard
by Spangler, Mike T 10 Sep '09

10 Sep '09

Tried 0.9.1-r710. Looks like its different, but it probably trashed the chip. No big deal.... node0:~ # flashrom -V -w arima.flash flashrom v0.9.1-r710 Found candidate at: 00000500-00000db0 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: bbc7 table(2224) checksum: a9cd entries: 13 Vendor ID: ARIMA, part ID: HDAMA Found chipset "AMD AMD8111", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 654M loops per second, 100 myus = 194 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xff, id2 0xff Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xff, id2 0xff Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xbf, id2 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access ERASE FAILED at 0x0007f000! Expected=0xff, Read=0x00, failed byte count from 0x00070000-0x0007ffff: 0x1000 ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! node0:~ # exit ________________________________ From: Spangler, Mike T Sent: Wednesday, September 09, 2009 10:07 PM To: 'flashrom(a)flashrom.org' Subject: Trial of ARIMA:HDAMA Motherboard All - Please let me know if this is a hopeless situation. Or is there something else I should try? Mike node0:~ # flashrom -V -r junk.flash |more Calibrating delay loop... 621M loops per second, 100 myus = 197 us. OK. Found canidate at: 00000500-00000db0 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: bbc7 table(2224) checksum: a9cd entries: 13 Vendor ID: ARIMA, part ID: HDAMA Found chipset "AMD8111", enabling flash write... OK. Unknown vendor:board from coreboot table or -m option: ARIMA:HDAMA Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/str Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF081, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF161, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF321A, 4096 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT25DF641, 8192 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25F512B, 64 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Atmel AT25FS010, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT25FS040, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT26DF041, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT26DF081A, 1024 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/str Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT26DF161A, 2048 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT26F004, 512 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Atmel AT45DB011D, 128 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB021D, 256 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB041D, 512 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB081D, 1024 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB161D, 2048 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB321C, 4224 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB321D, 4096 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB642D, 8192 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: spi_command called, but no SPI chipset/str apping detected Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/s Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L2005, 256 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L1635D, 2048 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L3235D, 4096 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L12805, 16384 KB: spi_command called, but no SPI chipse t/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strappi ng detected ng detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for SST SST25VF040.REMS, 512 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF040B.REMS, 512 KB: spi_command called, but no SPI chipset /strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strappin g detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapp ing detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1635D, 2048 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L3235D, 4096 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L12805, 16384 KB: spi_command called, but no SPI chipse t/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strappi ng detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for SST SST25VF040.REMS, 512 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF040B.REMS, 512 KB: spi_command called, but no SPI chipset /strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strappin g detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapp ing detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strappi ng detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity v iolation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 pari Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 pari ty violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0xbf , did 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: spi_command called, but no SPI c hipset/strapping detected Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset /strapping detected Reading flash... done. node0:~ # node0:~ # flashrom -w arima.flash Calibrating delay loop... OK. coreboot table found at 0x500. Vendor ID: ARIMA, part ID: HDAMA Found chipset "AMD8111", enabling flash write... OK. Unknown vendor:board from coreboot table or -m option: ARIMA:HDAMA Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. ERASE FAILED! node0:~ #

1 0

Trial of ARIMA:HDAMA Motherboard
by Spangler, Mike T 10 Sep '09

10 Sep '09

All - Please let me know if this is a hopeless situation. Or is there something else I should try? Mike node0:~ # flashrom -V -r junk.flash |more Calibrating delay loop... 621M loops per second, 100 myus = 197 us. OK. Found canidate at: 00000500-00000db0 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: bbc7 table(2224) checksum: a9cd entries: 13 Vendor ID: ARIMA, part ID: HDAMA Found chipset "AMD8111", enabling flash write... OK. Unknown vendor:board from coreboot table or -m option: ARIMA:HDAMA Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/str Probing for Atmel AT25DF041A, 512 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF081, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF161, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25DF321A, 4096 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT25DF641, 8192 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT25F512B, 64 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Atmel AT25FS010, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT25FS040, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT26DF041, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Atmel AT26DF081A, 1024 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/str Probing for Atmel AT26DF161, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT26DF161A, 2048 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT26F004, 512 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Atmel AT45DB011D, 128 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB021D, 256 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB041D, 512 KB: spi_command called, but no SPI chipset/str apping detected Probing for Atmel AT45DB081D, 1024 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB161D, 2048 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB321C, 4224 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB321D, 4096 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT45DB642D, 8192 KB: spi_command called, but no SPI chipset/st rapping detected Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI controller Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: spi_command called, but no SPI chipset/str apping detected Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/s Probing for Macronix MX25L1005, 128 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L2005, 256 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset/s trapping detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L1635D, 2048 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L3235D, 4096 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L12805, 16384 KB: spi_command called, but no SPI chipse t/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strappi ng detected ng detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for SST SST25VF040.REMS, 512 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF040B.REMS, 512 KB: spi_command called, but no SPI chipset /strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strappin g detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapp ing detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for Macronix MX25L1635D, 2048 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L3235D, 4096 KB: spi_command called, but no SPI chipset /strapping detected Probing for Macronix MX25L6405, 8192 KB: spi_command called, but no SPI chipset/ strapping detected Probing for Macronix MX25L12805, 16384 KB: spi_command called, but no SPI chipse t/strapping detected Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xbf, id2 0x60 Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset/strapp ing detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset/strappi ng detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF032B, 4096 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset/stra pping detected Probing for SST SST25VF040.REMS, 512 KB: spi_command called, but no SPI chipset/ strapping detected Probing for SST SST25VF040B.REMS, 512 KB: spi_command called, but no SPI chipset /strapping detected Probing for SST SST25VF080B, 1024 KB: spi_command called, but no SPI chipset/str apping detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parit y violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset/strappin g detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset/strapp ing detected spi_command called, but no SPI chipset/strapping detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset/strapping detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset/strappi ng detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xbf, id2 0x60 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity v iolation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset/strap ping detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset/stra pping detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 pari Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 pari ty violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0xbf , did 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: spi_command called, but no SPI c hipset/strapping detected Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset/strapping detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chips et/strapping detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset /strapping detected Reading flash... done. node0:~ # node0:~ # flashrom -w arima.flash Calibrating delay loop... OK. coreboot table found at 0x500. Vendor ID: ARIMA, part ID: HDAMA Found chipset "AMD8111", enabling flash write... OK. Unknown vendor:board from coreboot table or -m option: ARIMA:HDAMA Found chip "SST SST49LF004A/B" (512 KB) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. ERASE FAILED! node0:~ #

1 0

[commit] r721 - trunk
by svn＠flashrom.org 09 Sep '09

09 Sep '09

Author: uwe Date: 2009-09-09 02:58:19 +0200 (Wed, 09 Sep 2009) New Revision: 721 Modified: trunk/flashchips.c Log: Mark Macronix MX29F001B as OK, tested by me on hardware. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-09-09 00:55:13 UTC (rev 720) +++ trunk/flashchips.c 2009-09-09 00:58:19 UTC (rev 721) @@ -1444,7 +1444,7 @@ .model_id = MX_29F001B, .total_size = 128, .page_size = 32 * 1024, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_29f002, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */ .erase = erase_29f002,

1 0

[Patch] Correct Author Name for drkaiser.c
by Jörg Fischer 09 Sep '09

09 Sep '09

Hi, just noticed that I used a pseudonym in drkaiser.c source file. Attatched patch changes that to my RealName. -- J. Fischer Signed-off-by: Joerg Fischer <turboj(a)gmx.de> Index: drkaiser.c =================================================================== --- drkaiser.c (Revision 719) +++ drkaiser.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 TURBO J <turboj(a)web.de> + * Copyright (C) 2009 Joerg Fischer <turboj(a)web.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by

2 1

[commit] r720 - trunk
by svn＠flashrom.org 09 Sep '09

09 Sep '09

Author: uwe Date: 2009-09-09 02:55:13 +0200 (Wed, 09 Sep 2009) New Revision: 720 Modified: trunk/drkaiser.c Log: Replace pseudonym in drkaiser.c with real name. Signed-off-by: Joerg Fischer <turboj(a)gmx.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/drkaiser.c =================================================================== --- trunk/drkaiser.c 2009-09-05 02:30:58 UTC (rev 719) +++ trunk/drkaiser.c 2009-09-09 00:55:13 UTC (rev 720) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 TURBO J <turboj(a)web.de> + * Copyright (C) 2009 Joerg Fischer <turboj(a)web.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by

1 0

GA-MA780G-UD3H, SST25VF080B: read success report
by Andriy Gapon 06 Sep '09

06 Sep '09

Motherboard is GIGABYTE GA-MA780G-UD3H The rest is below: $ flashrom -r ma780g.f4.bios Calibrating delay loop... OK. No coreboot table found. Found chipset "ATI(AMD) SB700", enabling flash write... OK. Found board "GIGABYTE GA-MA78G-DS3H", enabling flash write... Serial flash segment 0xfffe0000-0xffffffff enabled Serial flash segment 0x000e0000-0x000fffff enabled Serial flash segment 0xffee0000-0xffefffff disabled Serial flash segment 0xfff80000-0xfffeffff enabled LPC write to serial flash enabled serial flash pin 29 OK. Found chip "SST SST25VF080B" (1024 KB) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Reading flash... done. -- Andriy Gapon

1 1

[PATCH] Blockwise erase infrastructure
by Carl-Daniel Hailfinger 05 Sep '09

05 Sep '09

Blockwise erase infrastructure, 6th try. The description is pretty long and has not changed since last time. I can repost it if desired. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-eraseblocks/flash.h =================================================================== --- flashrom-eraseblocks/flash.h (Revision 664) +++ flashrom-eraseblocks/flash.h (Arbeitskopie) @@ -140,6 +140,17 @@ CHIP_BUSTYPE_UNKNOWN = CHIP_BUSTYPE_PARALLEL | CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI, }; +/* + * How many different contiguous runs of erase blocks with one size each do + * we have for a given erase function? + */ +#define NUM_ERASEREGIONS 5 + +/* + * How many different erase functions do we have per chip? + */ +#define NUM_ERASEFUNCTIONS 5 + struct flashchip { const char *vendor; const char *name; @@ -168,6 +179,19 @@ /* Delay after "enter/exit ID mode" commands in microseconds. */ int probe_timing; int (*erase) (struct flashchip *flash); + + /* + * Erase blocks and associated erase function. The default entry is a + * chip-sized virtual block together with the chip erase function. + */ + struct block_eraser { + struct eraseblock{ + unsigned int size; /* Eraseblock size */ + unsigned int count; /* Number of contiguous blocks with that size */ + } eraseblocks[NUM_ERASEREGIONS]; + int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); + } block_erasers[NUM_ERASEFUNCTIONS]; + int (*write) (struct flashchip *flash, uint8_t *buf); int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); @@ -383,6 +407,7 @@ #define printf_debug(x...) { if (verbose) printf(x); } void map_flash_registers(struct flashchip *flash); int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); +int erase_flash(struct flashchip *flash); int min(int a, int b); int max(int a, int b); int check_erased_range(struct flashchip *flash, int start, int len); Index: flashrom-eraseblocks/flashchips.c =================================================================== --- flashrom-eraseblocks/flashchips.c (Revision 664) +++ flashrom-eraseblocks/flashchips.c (Arbeitskopie) @@ -1220,7 +1220,30 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_52, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, .write = spi_chip_write_256, .read = spi_chip_read, }, @@ -1236,7 +1259,26 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, + { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, .write = spi_chip_write_256, .read = spi_chip_read, }, Index: flashrom-eraseblocks/spi.c =================================================================== --- flashrom-eraseblocks/spi.c (Revision 664) +++ flashrom-eraseblocks/spi.c (Arbeitskopie) @@ -1006,7 +1006,7 @@ default: break; } - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Index: flashrom-eraseblocks/wbsio_spi.c =================================================================== --- flashrom-eraseblocks/wbsio_spi.c (Revision 664) +++ flashrom-eraseblocks/wbsio_spi.c (Arbeitskopie) @@ -197,7 +197,7 @@ return 1; } - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Index: flashrom-eraseblocks/w39v040c.c =================================================================== --- flashrom-eraseblocks/w39v040c.c (Revision 664) +++ flashrom-eraseblocks/w39v040c.c (Arbeitskopie) @@ -78,7 +78,7 @@ int page_size = flash->page_size; chipaddr bios = flash->virtual_memory; - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Index: flashrom-eraseblocks/sb600spi.c =================================================================== --- flashrom-eraseblocks/sb600spi.c (Revision 664) +++ flashrom-eraseblocks/sb600spi.c (Arbeitskopie) @@ -54,7 +54,7 @@ /* Erase first */ printf("Erasing flash before programming... "); - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Index: flashrom-eraseblocks/flashrom.c =================================================================== --- flashrom-eraseblocks/flashrom.c (Revision 664) +++ flashrom-eraseblocks/flashrom.c (Arbeitskopie) @@ -443,36 +443,66 @@ int erase_flash(struct flashchip *flash) { - uint32_t erasedbytes; - unsigned long size = flash->total_size * 1024; - unsigned char *buf = calloc(size, sizeof(char)); + int i, j, k, ret = 0, found = 0; + printf("Erasing flash chip... "); - if (NULL == flash->erase) { - printf("FAILED!\n"); + for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { + unsigned long done = 0; + struct block_eraser eraser = flash->block_erasers[k]; + + printf_debug("Looking at blockwise erase function %i... ", k); + if (!eraser.block_erase && !eraser.eraseblocks[0].count) { + printf_debug("not defined. " + "Looking for another erase function.\n"); + continue; + } + if (!eraser.block_erase && eraser.eraseblocks[0].count) { + printf_debug("eraseblock layout is known, but no " + "matching block erase function found. " + "Looking for another erase function.\n"); + continue; + } + if (eraser.block_erase && !eraser.eraseblocks[0].count) { + printf_debug("block erase function found, but " + "eraseblock layout is unknown. " + "Looking for another erase function.\n"); + continue; + } + found = 1; + printf_debug("trying... "); + for (i = 0; i < NUM_ERASEREGIONS; i++) { + /* count==0 for all automatically initialized array + * members so the loop below won't be executed for them. + */ + for (j = 0; j < eraser.eraseblocks[i].count; j++) { + ret = eraser.block_erase(flash, done + eraser.eraseblocks[i].size * j, eraser.eraseblocks[i].size); + if (ret) + break; + } + if (ret) + break; + } + /* If everything is OK, don't try another erase function. */ + if (!ret) + break; + } + /* If no block erase function was found or block erase failed, retry. */ + if ((!found || ret) && (flash->erase)) { + found = 1; + printf_debug("Trying whole-chip erase function... "); + ret = flash->erase(flash); + } + if (!found) { fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); return 1; } - flash->erase(flash); - /* FIXME: The lines below are superfluous. We should check the result - * of flash->erase(flash) instead. - */ - if (!flash->read) { - printf("FAILED!\n"); - fprintf(stderr, "ERROR: flashrom has no read function for this flash chip.\n"); - return 1; - } else - flash->read(flash, buf, 0, size); - - for (erasedbytes = 0; erasedbytes < size; erasedbytes++) - if (0xff != buf[erasedbytes]) { - printf("FAILED!\n"); - fprintf(stderr, "ERROR at 0x%08x: Expected=0xff, Read=0x%02x\n", - erasedbytes, buf[erasedbytes]); - return 1; - } - printf("SUCCESS.\n"); - return 0; + if (ret) { + fprintf(stderr, "FAILED!\n"); + } else { + printf("SUCCESS.\n"); + } + return ret; } void usage(const char *name) -- http://www.hailfinger.org/

1 1

[commit] r719 - trunk
by svn＠flashrom.org 05 Sep '09

05 Sep '09

Author: hailfinger Date: 2009-09-05 04:30:58 +0200 (Sat, 05 Sep 2009) New Revision: 719 Modified: trunk/flash.h trunk/flashchips.c trunk/flashrom.c trunk/ft2232_spi.c trunk/it87spi.c trunk/sb600spi.c trunk/spi.c trunk/w39v040c.c Log: This is a patch which stores eraseblock sizes and corresponding block erase functions in struct flashchip. I decided to fill in the info for a few chips to illustrate how this works both for uniform and non-uniform sector sizes. struct eraseblock{ int size; /* Eraseblock size */ int count; /* Number of contiguous blocks with that size */ }; struct eraseblock doesn't correspond with a single erase block, but with a group of contiguous erase blocks having the same size. Given a (top boot block) flash chip with the following weird, but real-life structure: top 16384 8192 8192 32768 65536 65536 65536 65536 65536 65536 65536 bottom we get the following encoding: {65536,7},{32768,1},{8192,2},{16384,1} Although the number of blocks is bigger than 4, the number of block groups is only 4. If you ever add some flash chips with more than 4 contiguous block groups, the definition will not fit into the 4-member array anymore and gcc will recognize that and error out. No undetected overflow possible. In that case, you simply increase array size a bit. For modern flash chips with uniform erase block size, you only need one array member anyway. Of course data types will need to be changed if you ever get flash chips with more than 2^30 erase blocks, but even with the lowest known erase granularity of 256 bytes, these flash chips will have to have a size of a quarter Terabyte. I'm pretty confident we won't see such big EEPROMs in the near future (or at least not attached in a way that makes flashrom usable). For SPI chips, we even have a guaranteed safety factor of 4096 over the maximum SPI chip size (which is 2^24). And if such a big flash chip has uniform erase block size, you could even split it among the 4 array members. If you change int count to unsigned int count, the storable size doubles. So with a split and a slight change of data type, the maximum ROM chip size is 2 Terabytes. Since many chips have multiple block erase functions where the eraseblock layout depends on the block erase function, this patch couples the block erase functions with their eraseblock layouts. struct block_eraser { struct eraseblock{ unsigned int size; /* Eraseblock size */ unsigned int count; /* Number of contiguous blocks with that size */ } eraseblocks[NUM_ERASEREGIONS]; int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); } block_erasers[NUM_ERASEFUNCTIONS]; Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/flash.h 2009-09-05 02:30:58 UTC (rev 719) @@ -149,6 +149,17 @@ CHIP_BUSTYPE_UNKNOWN = CHIP_BUSTYPE_PARALLEL | CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI, }; +/* + * How many different contiguous runs of erase blocks with one size each do + * we have for a given erase function? + */ +#define NUM_ERASEREGIONS 5 + +/* + * How many different erase functions do we have per chip? + */ +#define NUM_ERASEFUNCTIONS 5 + struct flashchip { const char *vendor; const char *name; @@ -177,6 +188,19 @@ /* Delay after "enter/exit ID mode" commands in microseconds. */ int probe_timing; int (*erase) (struct flashchip *flash); + + /* + * Erase blocks and associated erase function. The default entry is a + * chip-sized virtual block together with the chip erase function. + */ + struct block_eraser { + struct eraseblock{ + unsigned int size; /* Eraseblock size */ + unsigned int count; /* Number of contiguous blocks with that size */ + } eraseblocks[NUM_ERASEREGIONS]; + int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); + } block_erasers[NUM_ERASEFUNCTIONS]; + int (*write) (struct flashchip *flash, uint8_t *buf); int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); @@ -417,6 +441,7 @@ #define printf_debug(x...) { if (verbose) printf(x); } void map_flash_registers(struct flashchip *flash); int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); +int erase_flash(struct flashchip *flash); int min(int a, int b); int max(int a, int b); int check_erased_range(struct flashchip *flash, int start, int len); Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/flashchips.c 2009-09-05 02:30:58 UTC (rev 719) @@ -1229,7 +1229,30 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_52, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, .write = spi_chip_write_256, .read = spi_chip_read, }, @@ -1245,7 +1268,26 @@ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .erase = spi_chip_erase_60_c7, + .erase = NULL, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, + { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, .write = spi_chip_write_256, .read = spi_chip_read, }, Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/flashrom.c 2009-09-05 02:30:58 UTC (rev 719) @@ -474,36 +474,66 @@ int erase_flash(struct flashchip *flash) { - uint32_t erasedbytes; - unsigned long size = flash->total_size * 1024; - unsigned char *buf = calloc(size, sizeof(char)); + int i, j, k, ret = 0, found = 0; + printf("Erasing flash chip... "); - if (NULL == flash->erase) { - printf("FAILED!\n"); + for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { + unsigned long done = 0; + struct block_eraser eraser = flash->block_erasers[k]; + + printf_debug("Looking at blockwise erase function %i... ", k); + if (!eraser.block_erase && !eraser.eraseblocks[0].count) { + printf_debug("not defined. " + "Looking for another erase function.\n"); + continue; + } + if (!eraser.block_erase && eraser.eraseblocks[0].count) { + printf_debug("eraseblock layout is known, but no " + "matching block erase function found. " + "Looking for another erase function.\n"); + continue; + } + if (eraser.block_erase && !eraser.eraseblocks[0].count) { + printf_debug("block erase function found, but " + "eraseblock layout is unknown. " + "Looking for another erase function.\n"); + continue; + } + found = 1; + printf_debug("trying... "); + for (i = 0; i < NUM_ERASEREGIONS; i++) { + /* count==0 for all automatically initialized array + * members so the loop below won't be executed for them. + */ + for (j = 0; j < eraser.eraseblocks[i].count; j++) { + ret = eraser.block_erase(flash, done + eraser.eraseblocks[i].size * j, eraser.eraseblocks[i].size); + if (ret) + break; + } + if (ret) + break; + } + /* If everything is OK, don't try another erase function. */ + if (!ret) + break; + } + /* If no block erase function was found or block erase failed, retry. */ + if ((!found || ret) && (flash->erase)) { + found = 1; + printf_debug("Trying whole-chip erase function... "); + ret = flash->erase(flash); + } + if (!found) { fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); return 1; } - flash->erase(flash); - /* FIXME: The lines below are superfluous. We should check the result - * of flash->erase(flash) instead. - */ - if (!flash->read) { - printf("FAILED!\n"); - fprintf(stderr, "ERROR: flashrom has no read function for this flash chip.\n"); - return 1; - } else - flash->read(flash, buf, 0, size); - - for (erasedbytes = 0; erasedbytes < size; erasedbytes++) - if (0xff != buf[erasedbytes]) { - printf("FAILED!\n"); - fprintf(stderr, "ERROR at 0x%08x: Expected=0xff, Read=0x%02x\n", - erasedbytes, buf[erasedbytes]); - return 1; - } - printf("SUCCESS.\n"); - return 0; + if (ret) { + fprintf(stderr, "FAILED!\n"); + } else { + printf("SUCCESS.\n"); + } + return ret; } void emergency_help_message() Modified: trunk/ft2232_spi.c =================================================================== --- trunk/ft2232_spi.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/ft2232_spi.c 2009-09-05 02:30:58 UTC (rev 719) @@ -271,7 +271,7 @@ spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Modified: trunk/it87spi.c =================================================================== --- trunk/it87spi.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/it87spi.c 2009-09-05 02:30:58 UTC (rev 719) @@ -279,7 +279,7 @@ spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Modified: trunk/sb600spi.c =================================================================== --- trunk/sb600spi.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/sb600spi.c 2009-09-05 02:30:58 UTC (rev 719) @@ -55,7 +55,7 @@ spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Modified: trunk/spi.c =================================================================== --- trunk/spi.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/spi.c 2009-09-05 02:30:58 UTC (rev 719) @@ -972,7 +972,7 @@ spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } @@ -1021,7 +1021,7 @@ default: break; } - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Modified: trunk/w39v040c.c =================================================================== --- trunk/w39v040c.c 2009-09-05 01:31:32 UTC (rev 718) +++ trunk/w39v040c.c 2009-09-05 02:30:58 UTC (rev 719) @@ -72,7 +72,7 @@ int page_size = flash->page_size; chipaddr bios = flash->virtual_memory; - if (flash->erase(flash)) { + if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; }

1 0

more flashchips.c .probe_timing updates ...
by Putlinuxonit 05 Sep '09

05 Sep '09

Hi All, Just found a datasheet for the PMC Pm49FL002 / 004 and updated the flaschips.c file . find attached, the full diff against r701. - Udu E. Ogah .~~~~~~~~~~.

2 2

[commit] r718 - trunk
by svn＠flashrom.org 05 Sep '09

05 Sep '09

Author: hailfinger Date: 2009-09-05 03:31:32 +0200 (Sat, 05 Sep 2009) New Revision: 718 Modified: trunk/flashchips.c Log: Update probe timings for dozens of flash chips. Signed-off-by: Udu Ogah <putlinuxonit(a)gmail.com> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c =================================================================== --- trunk/flashchips.c 2009-09-05 01:16:30 UTC (rev 717) +++ trunk/flashchips.c 2009-09-05 01:31:32 UTC (rev 718) @@ -58,7 +58,7 @@ .page_size = 16 * 1024, .tested = TEST_OK_PREW, .probe = probe_29f040b, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, .erase = erase_29f040b, .write = write_pm29f002, .read = read_memmapped, @@ -74,7 +74,7 @@ .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, .erase = erase_chip_jedec, .write = write_en29f002a, .read = read_memmapped, @@ -90,7 +90,7 @@ .page_size = 256, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, .erase = erase_chip_jedec, .write = write_en29f002a, .read = read_memmapped, @@ -138,7 +138,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, .erase = erase_29f040b, .write = write_29f040b, .read = read_memmapped, @@ -668,7 +668,7 @@ .page_size = 64, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -684,7 +684,7 @@ .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, /* doc1008.pdf dont says anything about probe timing */ + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -700,7 +700,7 @@ .page_size = 256, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, /* doc1008.pdf dont says anything about probe timing */ + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -780,7 +780,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_49fl00x, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .erase = erase_49fl00x, .write = write_49fl00x, .read = read_memmapped, @@ -796,7 +796,7 @@ .page_size = 4096, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -1068,7 +1068,7 @@ .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_en29f002a, .read = read_memmapped, @@ -1084,7 +1084,7 @@ .page_size = 256, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_en29f002a, .read = read_memmapped, @@ -1100,7 +1100,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -1116,7 +1116,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -1164,7 +1164,7 @@ .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ .tested = TEST_BAD_ERASE|TEST_BAD_WRITE, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -1180,7 +1180,7 @@ .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ .tested = TEST_OK_PR|TEST_BAD_ERASE|TEST_BAD_WRITE, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -1692,7 +1692,7 @@ .page_size = 4096, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -1708,7 +1708,7 @@ .page_size = 16 * 1024, .tested = TEST_OK_PREW, .probe = probe_49fl00x, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .erase = erase_49fl00x, .write = write_49fl00x, .read = read_memmapped, @@ -1724,7 +1724,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_49fl00x, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .erase = erase_49fl00x, .write = write_49fl00x, .read = read_memmapped, @@ -1916,7 +1916,7 @@ .page_size = 128, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = 10, .erase = erase_chip_jedec, .write = write_jedec, .read = read_memmapped, @@ -2076,7 +2076,7 @@ .page_size = 16 * 1024, .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (sst_fwhub.c) */ + .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ .erase = erase_sst_fwhub, .write = write_sst_fwhub, .read = read_memmapped, @@ -2092,7 +2092,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PROBE, .probe = probe_sst_fwhub, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (sst_fwhub.c) */ + .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ .erase = erase_sst_fwhub, .write = write_sst_fwhub, .read = read_memmapped, @@ -2108,7 +2108,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (sst_fwhub.c) */ + .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ .erase = erase_sst_fwhub, .write = write_sst_fwhub, .read = read_memmapped, @@ -2140,7 +2140,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (sst_fwhub.c) */ + .probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ .erase = erase_sst_fwhub, .write = write_sst_fwhub, .read = read_memmapped, @@ -2236,7 +2236,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_sst_fwhub, - .probe_timing = TIMING_FIXME, /* routine is wrapper to probe_jedec (sst_fwhub.c) */ + .probe_timing = 1, /* 150ns | routine is wrapper to probe_jedec (sst_fwhub.c) */ .erase = erase_sst_fwhub, .write = write_sst_fwhub, .read = read_memmapped, @@ -2482,7 +2482,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_m29f002, .write = write_m29f002b, .read = read_memmapped, @@ -2498,7 +2498,7 @@ .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_m29f002, .write = write_m29f002t, .read = read_memmapped, @@ -2546,7 +2546,7 @@ .page_size = 16 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_jedec, .read = read_memmapped, @@ -2562,7 +2562,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_jedec, .read = read_memmapped, @@ -2706,7 +2706,7 @@ .page_size = 64 * 1024, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_jedec, .read = read_memmapped, @@ -2722,7 +2722,7 @@ .page_size = 128, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -2738,7 +2738,7 @@ .page_size = 128, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -2754,7 +2754,7 @@ .page_size = 128, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -2770,7 +2770,7 @@ .page_size = 128, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -2786,7 +2786,7 @@ .page_size = 16384, /* Non-uniform sectors */ .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -2802,7 +2802,7 @@ .page_size = 16384, /* Non-uniform sectors */ .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL, .write = NULL, .read = read_memmapped, @@ -2898,7 +2898,7 @@ .page_size = 128, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = 10, /* used datasheet for the W29C011A */ .erase = erase_chip_jedec, .write = write_jedec, .read = read_memmapped, @@ -3042,7 +3042,7 @@ .page_size = 128, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = 10, .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped, @@ -3074,7 +3074,7 @@ .page_size = 128, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_FIXME, + .probe_timing = 10, .erase = erase_chip_jedec, .write = write_49f002, .read = read_memmapped,

1 0

[PATCH] Reduce probe code duplication, fix 82802AB
by Carl-Daniel Hailfinger 05 Sep '09

05 Sep '09

Quite a few probe functions in flashrom are copies of probe_jedec with additional lock bit printing or other glue. Make them call probe_jedec instead. Use the correct reset sequence for 82802AB. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-call_probe_jedec/w39v040c.c =================================================================== --- flashrom-call_probe_jedec/w39v040c.c (Revision 674) +++ flashrom-call_probe_jedec/w39v040c.c (Arbeitskopie) @@ -23,8 +23,12 @@ int probe_w39v040c(struct flashchip *flash) { chipaddr bios = flash->virtual_memory; - uint8_t id1, id2, lock; + int result = probe_jedec(flash); + uint8_t lock; + if (!result) + return result; + chip_writeb(0xAA, bios + 0x5555); programmer_delay(10); chip_writeb(0x55, bios + 0x2AAA); @@ -32,8 +36,6 @@ chip_writeb(0x90, bios + 0x5555); programmer_delay(10); - id1 = chip_readb(bios); - id2 = chip_readb(bios + 1); lock = chip_readb(bios + 0xfff2); chip_writeb(0xAA, bios + 0x5555); @@ -43,17 +45,9 @@ chip_writeb(0xF0, bios + 0x5555); programmer_delay(40); - printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); - if (!oddparity(id1)) - printf_debug(", id1 parity violation"); - printf_debug("\n"); - if (flash->manufacture_id == id1 && flash->model_id == id2) { - printf("%s: Boot block #TBL is %slocked, rest of chip #WP is %slocked.\n", - __func__, lock & 0x4 ? "" : "un", lock & 0x8 ? "" : "un"); - return 1; - } - - return 0; + printf("%s: Boot block #TBL is %slocked, rest of chip #WP is %slocked.\n", + __func__, lock & 0x4 ? "" : "un", lock & 0x8 ? "" : "un"); + return 1; } int erase_w39v040c(struct flashchip *flash) Index: flashrom-call_probe_jedec/stm50flw0x0x.c =================================================================== --- flashrom-call_probe_jedec/stm50flw0x0x.c (Revision 674) +++ flashrom-call_probe_jedec/stm50flw0x0x.c (Arbeitskopie) @@ -42,50 +42,11 @@ int probe_stm50flw0x0x(struct flashchip *flash) { - chipaddr bios = flash->virtual_memory; - uint8_t id1, id2; - uint32_t largeid1, largeid2; + int result = probe_jedec(flash); - /* Issue JEDEC Product ID Entry command */ - chip_writeb(0xAA, bios + 0x5555); - programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); - programmer_delay(10); - chip_writeb(0x90, bios + 0x5555); - programmer_delay(40); + if (!result) + return result; - /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - largeid1 = id1; - largeid2 = id2; - - /* Check if it is a continuation ID, this should be a while loop. */ - if (id1 == 0x7F) { - largeid1 <<= 8; - id1 = chip_readb(bios + 0x100); - largeid1 |= id1; - } - if (id2 == 0x7F) { - largeid2 <<= 8; - id2 = chip_readb(bios + 0x101); - largeid2 |= id2; - } - - /* Issue JEDEC Product ID Exit command */ - chip_writeb(0xAA, bios + 0x5555); - programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); - programmer_delay(10); - chip_writeb(0xF0, bios + 0x5555); - programmer_delay(40); - - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, largeid1, - largeid2); - - if (largeid1 != flash->manufacture_id || largeid2 != flash->model_id) - return 0; - map_flash_registers(flash); return 1; Index: flashrom-call_probe_jedec/w39v080fa.c =================================================================== --- flashrom-call_probe_jedec/w39v080fa.c (Revision 674) +++ flashrom-call_probe_jedec/w39v080fa.c (Arbeitskopie) @@ -22,30 +22,11 @@ int probe_winbond_fwhub(struct flashchip *flash) { - chipaddr bios = flash->virtual_memory; - uint8_t id1, id2; + int result = probe_jedec(flash); - /* Product Identification Entry */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0x90, bios + 0x5555); - programmer_delay(10); + if (!result) + return result; - /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - - /* Product Identifixation Exit */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); - programmer_delay(10); - - printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); - - if (id1 != flash->manufacture_id || id2 != flash->model_id) - return 0; - map_flash_registers(flash); return 1; Index: flashrom-call_probe_jedec/82802ab.c =================================================================== --- flashrom-call_probe_jedec/82802ab.c (Revision 674) +++ flashrom-call_probe_jedec/82802ab.c (Arbeitskopie) @@ -47,14 +47,11 @@ chipaddr bios = flash->virtual_memory; uint8_t id1, id2; -#if 0 - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0x90, bios + 0x5555); -#endif - - chip_writeb(0xff, bios); + /* Reset to get a clean state */ + chip_writeb(0xFF, bios); programmer_delay(10); + + /* Enter ID mode */ chip_writeb(0x90, bios); programmer_delay(10); @@ -62,9 +59,7 @@ id2 = chip_readb(bios + 0x01); /* Leave ID mode */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); + chip_writeb(0xFF, bios); programmer_delay(10); @@ -81,7 +76,6 @@ uint8_t wait_82802ab(chipaddr bios) { uint8_t status; - uint8_t id1, id2; chip_writeb(0x70, bios); if ((chip_readb(bios) & 0x80) == 0) { // it's busy @@ -90,19 +84,9 @@ status = chip_readb(bios); - // put another command to get out of status register mode + /* Reset to get a clean state */ + chip_writeb(0xFF, bios); - chip_writeb(0x90, bios); - programmer_delay(10); - - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - - // this is needed to jam it out of "read id" mode - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); - return status; } -- http://www.hailfinger.org/

2 3

[commit] r717 - trunk
by svn＠flashrom.org 05 Sep '09

05 Sep '09

Author: hailfinger Date: 2009-09-05 03:16:30 +0200 (Sat, 05 Sep 2009) New Revision: 717 Modified: trunk/82802ab.c trunk/stm50flw0x0x.c trunk/w39v040c.c trunk/w39v080fa.c Log: Quite a few probe functions in flashrom are copies of probe_jedec with additional lock bit printing or other glue. Make them call probe_jedec instead. Use the correct reset sequence for 82802AB. Detailed explanation: The reset sequence before ID reading was correct, so ID always worked. But the reset sequence after ID reading was a copy-paste leftover from probe_jedec and didn't have any effect. I dug up flash_and_burn from the freebios-v1 tree and found out that 82802ab.c was indeed a copy of jedec.c with lots of experimental unannotated #if 0 and #if 1. About the wait_82802ab change: Before the patch, wait_82802ab entered read status mode, switched to ID mode, then tried an incorrect and unsupported JEDEC command to exit ID mode. Nobody ever saw that this failed because all subsequent function calls had the correct reset sequence at the beginning. With the patch, wait_82802ab enters read status mode, then switches back to read mode with the official reset command. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/82802ab.c =================================================================== --- trunk/82802ab.c 2009-09-05 01:12:07 UTC (rev 716) +++ trunk/82802ab.c 2009-09-05 01:16:30 UTC (rev 717) @@ -47,14 +47,11 @@ chipaddr bios = flash->virtual_memory; uint8_t id1, id2; -#if 0 - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0x90, bios + 0x5555); -#endif - - chip_writeb(0xff, bios); + /* Reset to get a clean state */ + chip_writeb(0xFF, bios); programmer_delay(10); + + /* Enter ID mode */ chip_writeb(0x90, bios); programmer_delay(10); @@ -62,9 +59,7 @@ id2 = chip_readb(bios + 0x01); /* Leave ID mode */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); + chip_writeb(0xFF, bios); programmer_delay(10); @@ -81,7 +76,6 @@ uint8_t wait_82802ab(chipaddr bios) { uint8_t status; - uint8_t id1, id2; chip_writeb(0x70, bios); if ((chip_readb(bios) & 0x80) == 0) { // it's busy @@ -90,19 +84,9 @@ status = chip_readb(bios); - // put another command to get out of status register mode + /* Reset to get a clean state */ + chip_writeb(0xFF, bios); - chip_writeb(0x90, bios); - programmer_delay(10); - - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - - // this is needed to jam it out of "read id" mode - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); - return status; } Modified: trunk/stm50flw0x0x.c =================================================================== --- trunk/stm50flw0x0x.c 2009-09-05 01:12:07 UTC (rev 716) +++ trunk/stm50flw0x0x.c 2009-09-05 01:16:30 UTC (rev 717) @@ -42,50 +42,11 @@ int probe_stm50flw0x0x(struct flashchip *flash) { - chipaddr bios = flash->virtual_memory; - uint8_t id1, id2; - uint32_t largeid1, largeid2; + int result = probe_jedec(flash); - /* Issue JEDEC Product ID Entry command */ - chip_writeb(0xAA, bios + 0x5555); - programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); - programmer_delay(10); - chip_writeb(0x90, bios + 0x5555); - programmer_delay(40); + if (!result) + return result; - /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - largeid1 = id1; - largeid2 = id2; - - /* Check if it is a continuation ID, this should be a while loop. */ - if (id1 == 0x7F) { - largeid1 <<= 8; - id1 = chip_readb(bios + 0x100); - largeid1 |= id1; - } - if (id2 == 0x7F) { - largeid2 <<= 8; - id2 = chip_readb(bios + 0x101); - largeid2 |= id2; - } - - /* Issue JEDEC Product ID Exit command */ - chip_writeb(0xAA, bios + 0x5555); - programmer_delay(10); - chip_writeb(0x55, bios + 0x2AAA); - programmer_delay(10); - chip_writeb(0xF0, bios + 0x5555); - programmer_delay(40); - - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, largeid1, - largeid2); - - if (largeid1 != flash->manufacture_id || largeid2 != flash->model_id) - return 0; - map_flash_registers(flash); return 1; Modified: trunk/w39v040c.c =================================================================== --- trunk/w39v040c.c 2009-09-05 01:12:07 UTC (rev 716) +++ trunk/w39v040c.c 2009-09-05 01:16:30 UTC (rev 717) @@ -23,8 +23,12 @@ int probe_w39v040c(struct flashchip *flash) { chipaddr bios = flash->virtual_memory; - uint8_t id1, id2, lock; + int result = probe_jedec(flash); + uint8_t lock; + if (!result) + return result; + chip_writeb(0xAA, bios + 0x5555); programmer_delay(10); chip_writeb(0x55, bios + 0x2AAA); @@ -32,8 +36,6 @@ chip_writeb(0x90, bios + 0x5555); programmer_delay(10); - id1 = chip_readb(bios); - id2 = chip_readb(bios + 1); lock = chip_readb(bios + 0xfff2); chip_writeb(0xAA, bios + 0x5555); @@ -43,17 +45,9 @@ chip_writeb(0xF0, bios + 0x5555); programmer_delay(40); - printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); - if (!oddparity(id1)) - printf_debug(", id1 parity violation"); - printf_debug("\n"); - if (flash->manufacture_id == id1 && flash->model_id == id2) { - printf("%s: Boot block #TBL is %slocked, rest of chip #WP is %slocked.\n", - __func__, lock & 0x4 ? "" : "un", lock & 0x8 ? "" : "un"); - return 1; - } - - return 0; + printf("%s: Boot block #TBL is %slocked, rest of chip #WP is %slocked.\n", + __func__, lock & 0x4 ? "" : "un", lock & 0x8 ? "" : "un"); + return 1; } int erase_w39v040c(struct flashchip *flash) Modified: trunk/w39v080fa.c =================================================================== --- trunk/w39v080fa.c 2009-09-05 01:12:07 UTC (rev 716) +++ trunk/w39v080fa.c 2009-09-05 01:16:30 UTC (rev 717) @@ -22,30 +22,11 @@ int probe_winbond_fwhub(struct flashchip *flash) { - chipaddr bios = flash->virtual_memory; - uint8_t id1, id2; + int result = probe_jedec(flash); - /* Product Identification Entry */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0x90, bios + 0x5555); - programmer_delay(10); + if (!result) + return result; - /* Read product ID */ - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - - /* Product Identifixation Exit */ - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); - programmer_delay(10); - - printf_debug("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); - - if (id1 != flash->manufacture_id || id2 != flash->model_id) - return 0; - map_flash_registers(flash); return 1;

1 0

[PATCH] Fall back to svn info if svnversion fails
by Carl-Daniel Hailfinger 05 Sep '09

05 Sep '09

Not all systems have svnversion installed. Fall back to svn info if svnversion fails. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-svnversion_fallback/Makefile =================================================================== --- flashrom-svnversion_fallback/Makefile (Revision 713) +++ flashrom-svnversion_fallback/Makefile (Arbeitskopie) @@ -58,7 +58,7 @@ # of the checked out flashrom files. # Note to packagers: Any tree exported with "make export" or "make tarball" # will not require subversion. The downloadable snapshots are already exported. -SVNVERSION := $(shell LC_ALL=C svnversion -cn . | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || echo unknown) +SVNVERSION := $(shell LC_ALL=C svnversion -cn . | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . | grep ^Revision | sed "s/.*[[:blank:]]\+$[0-9]*$[^0-9]*/\1/" | grep "[0-9]" || echo unknown) RELEASE := 0.9.1 VERSION := $(RELEASE)-r$(SVNVERSION) -- http://www.hailfinger.org/

3 4

[commit] r716 - trunk
by svn＠flashrom.org 05 Sep '09

05 Sep '09

Author: hailfinger Date: 2009-09-05 03:12:07 +0200 (Sat, 05 Sep 2009) New Revision: 716 Modified: trunk/Makefile Log: Not all systems have svnversion installed. Fall back to svn info if svnversion fails. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-09-05 01:10:23 UTC (rev 715) +++ trunk/Makefile 2009-09-05 01:12:07 UTC (rev 716) @@ -58,7 +58,7 @@ # of the checked out flashrom files. # Note to packagers: Any tree exported with "make export" or "make tarball" # will not require subversion. The downloadable snapshots are already exported. -SVNVERSION := $(shell LC_ALL=C svnversion -cn . | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || echo unknown) +SVNVERSION := $(shell LC_ALL=C svnversion -cn . | sed -e "s/.*://" -e "s/$[0-9]*$.*/\1/" | grep "[0-9]" || LC_ALL=C svn info . | grep ^Revision | sed "s/.*[[:blank:]]\+$[0-9]*$[^0-9]*/\1/" | grep "[0-9]" || echo unknown) RELEASE := 0.9.1 VERSION := $(RELEASE)-r$(SVNVERSION)

1 0

[PATCH] Fix strict aliasing in serprog
by Carl-Daniel Hailfinger 05 Sep '09

05 Sep '09

Fix strict aliasing in serprog. Initialize the sockaddr,sockaddr_in union directly instead of running memset later. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-strict_aliasing/serprog.c =================================================================== --- flashrom-strict_aliasing/serprog.c (revision 714) +++ flashrom-strict_aliasing/serprog.c (working copy) @@ -105,7 +105,7 @@ { int flag = 1; struct hostent *hostPtr = NULL; - struct sockaddr_in sp; + union { struct sockaddr_in si; struct sockaddr s; } sp = {}; int sock; printf_debug(MSGHEADER "IP %s port %d\n", ip, port); sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP); @@ -117,11 +117,10 @@ if (NULL == hostPtr) sp_die("Error: cannot resolve"); } - memset(&sp, 0, sizeof(sp)); - sp.sin_family = AF_INET; - sp.sin_port = htons(port); - (void)memcpy(&sp.sin_addr, hostPtr->h_addr, hostPtr->h_length); - if (connect(sock, (struct sockaddr *)&sp, sizeof(sp)) < 0) { + sp.si.sin_family = AF_INET; + sp.si.sin_port = htons(port); + (void)memcpy(&sp.si.sin_addr, hostPtr->h_addr, hostPtr->h_length); + if (connect(sock, &sp.s, sizeof(sp.si)) < 0) { close(sock); sp_die("Error: serprog cannot connect"); } -- http://www.hailfinger.org/

1 1

[commit] r715 - trunk
by svn＠flashrom.org 05 Sep '09

05 Sep '09

Author: hailfinger Date: 2009-09-05 03:10:23 +0200 (Sat, 05 Sep 2009) New Revision: 715 Modified: trunk/serprog.c Log: Fix strict aliasing in serprog. Initialize the sockaddr,sockaddr_in union directly instead of running memset later. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/serprog.c =================================================================== --- trunk/serprog.c 2009-09-04 13:57:07 UTC (rev 714) +++ trunk/serprog.c 2009-09-05 01:10:23 UTC (rev 715) @@ -105,7 +105,7 @@ { int flag = 1; struct hostent *hostPtr = NULL; - struct sockaddr_in sp; + union { struct sockaddr_in si; struct sockaddr s; } sp = {}; int sock; printf_debug(MSGHEADER "IP %s port %d\n", ip, port); sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP); @@ -117,11 +117,10 @@ if (NULL == hostPtr) sp_die("Error: cannot resolve"); } - memset(&sp, 0, sizeof(sp)); - sp.sin_family = AF_INET; - sp.sin_port = htons(port); - (void)memcpy(&sp.sin_addr, hostPtr->h_addr, hostPtr->h_length); - if (connect(sock, (struct sockaddr *)&sp, sizeof(sp)) < 0) { + sp.si.sin_family = AF_INET; + sp.si.sin_port = htons(port); + (void)memcpy(&sp.si.sin_addr, hostPtr->h_addr, hostPtr->h_length); + if (connect(sock, &sp.s, sizeof(sp.si)) < 0) { close(sock); sp_die("Error: serprog cannot connect"); }

1 0

pending patches
by Carl-Daniel Hailfinger 04 Sep '09

04 Sep '09

We have loads of pending patches and I'd like to reduce them to a manageable number. I plan to review everything not written by me unless it needs testing on real hardware. A list of pending patches is available here: http://patchwork.coreboot.org/project/flashrom/list/ The patch name listed in patchwork is basically the subject of the mail containing the patch. Regards, Carl-Daniel -- http://www.hailfinger.org/

3 2

[commit] r714 - trunk
by svn＠flashrom.org 04 Sep '09

04 Sep '09

Author: stepan Date: 2009-09-04 15:57:07 +0200 (Fri, 04 Sep 2009) New Revision: 714 Modified: trunk/physmap.c Log: fix for gcc 4.4 strict aliasing rules. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/physmap.c =================================================================== --- trunk/physmap.c 2009-09-02 23:27:45 UTC (rev 713) +++ trunk/physmap.c 2009-09-04 13:57:07 UTC (rev 714) @@ -133,7 +133,7 @@ msr_t rdmsr(int addr) { - uint8_t buf[8]; + uint32_t buf[2]; msr_t msr = { 0xffffffff, 0xffffffff }; if (lseek(fd_msr, (off_t) addr, SEEK_SET) == -1) { @@ -143,8 +143,8 @@ } if (read(fd_msr, buf, 8) == 8) { - msr.lo = *(uint32_t *)buf; - msr.hi = *(uint32_t *)(buf + 4); + msr.lo = buf[0]; + msr.hi = buf[1]; return msr; }

1 0

[PATCH] Add Suport for Dr.Kaiser PC-Waechter
by TURBO J 04 Sep '09

04 Sep '09

Hi, this patch adds support for a PCI "flash memory card" named "Dr. Kaiser PC-Waechter". The Vendor sold different designs under that name, the patch works with the one that has an ACTEL FPGA as PCI-to-Flash bridge. The Flash chip is a "Macronix MX29F001B" (128 KB, Parallel) soldered directly to the PCB. Flash operations (PROBE, READ, ERASE, WRITE) work as expected, btw. I had to modify pcidev.c a bit: This card has 0x0000000 at PCI_BASE_ADDRESS_0 because it uses PCI_BASE_ADDRESS_2 instead. -- TURBO J ps. Unrelated issue: My OpenSUSE 11.2 Beta Box needs "make CFLAGS=-fno-strict-aliasing" GCC is "gcc version 4.4.1 [gcc-4_4-branch revision 149935] (SUSE Linux)" Signed-off-by: TURBO J <turboj(a)gmx.de> Index: flash.h =================================================================== --- flash.h (Revision 710) +++ flash.h (Arbeitskopie) @@ -84,6 +84,7 @@ PROGRAMMER_INTERNAL, PROGRAMMER_DUMMY, PROGRAMMER_NIC3COM, + PROGRAMMER_DRKAISER, PROGRAMMER_SATASII, PROGRAMMER_IT87SPI, #if FT2232_SPI_SUPPORT == 1 @@ -387,6 +388,15 @@ uint8_t nic3com_chip_readb(const chipaddr addr); extern struct pcidev_status nics_3com[]; +/* drkaiser.c */ + +int drkaiser_init(void); +int drkaiser_shutdown(void); +void drkaiser_chip_writeb(uint8_t val, chipaddr addr); +uint8_t drkaiser_chip_readb(const chipaddr addr); + +extern struct pcidev_status drkaiser_pcidev[]; + /* satasii.c */ int satasii_init(void); int satasii_shutdown(void); Index: drkaiser.c =================================================================== --- drkaiser.c (Revision 0) +++ drkaiser.c (Revision 0) @@ -0,0 +1,76 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 TURBO J <turboj(a)web.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include "flash.h" +#define PCI_VENDOR_ID_DRKAISER 0x1803 +#define PCI_DEVICE_ID_DRKAISER_ACTEL 0x5057 + + +struct pcidev_status drkaiser_pcidev[] = { + {0x1803, 0x5057,PCI_OK,"Dr.Kaiser","PC-Waechter (Actel FPGA)"}, + {}, +}; + +#define PCI_MAGIC_DRKAISER_ADR 0x50 +#define PCI_MAGIC_DRKAISER_VALUE 0xA971 + +uint8_t * drkaiser_mem; + +int drkaiser_init(void) +{ + get_io_perms(); + pcidev_init(PCI_VENDOR_ID_DRKAISER, drkaiser_pcidev, programmer_param); + + // Write Magic Register to enable FLASH Write + pci_write_word(pcidev_dev,PCI_MAGIC_DRKAISER_ADR, PCI_MAGIC_DRKAISER_VALUE); + + // Map 128KB Flash Memory Window + drkaiser_mem=physmap("Dr.Kaiser PC-Waechter FLASH Memory", + pci_read_long(pcidev_dev,PCI_BASE_ADDRESS_2), 128*1024); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + return 0; +} + +int drkaiser_shutdown(void) +{ + // Write protect the Flash again + pci_write_word(pcidev_dev,PCI_MAGIC_DRKAISER_ADR, 0); + free(programmer_param); + pci_cleanup(pacc); + release_io_perms(); + return 0; +}; + + +void drkaiser_chip_writeb(uint8_t val, chipaddr addr) +{ + mmio_writeb(val, drkaiser_mem+addr ); +} + +uint8_t drkaiser_chip_readb(const chipaddr addr) +{ + return mmio_readb(drkaiser_mem + addr ); +} + + + Index: pcidev.c =================================================================== --- pcidev.c (Revision 710) +++ pcidev.c (Arbeitskopie) @@ -39,6 +39,9 @@ /* Don't use dev->base_addr[0], won't work on older libpci. */ addr = pci_read_long(dev, PCI_BASE_ADDRESS_0) & ~0x03; + + /* Dr. Kaiser has BASE_ADDRESS_0 = 0x000 */ + if (!addr) addr= pci_read_long(dev, PCI_BASE_ADDRESS_2) & ~0x03; printf("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", devs[i].vendor_name, devs[i].device_name, dev->vendor_id, Index: Makefile =================================================================== --- Makefile (Revision 710) +++ Makefile (Arbeitskopie) @@ -50,7 +50,7 @@ flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o it87spi.o \ ichspi.o w39v040c.o sb600spi.o wbsio_spi.o m29f002.o internal.o \ dummyflasher.o pcidev.o nic3com.o satasii.o ft2232_spi.o \ - print.o + print.o drkaiser.o all: pciutils features dep $(PROGRAM) Index: flashrom.c =================================================================== --- flashrom.c (Revision 710) +++ flashrom.c (Arbeitskopie) @@ -87,7 +87,24 @@ .chip_writen = fallback_chip_writen, .delay = internal_delay, }, + { + .name = "drkaiser", + .init = drkaiser_init, + .shutdown = drkaiser_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = drkaiser_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = drkaiser_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, + { .name = "satasii", .init = satasii_init, @@ -747,6 +764,7 @@ printf("\nSupported PCI devices flashrom can use " "as programmer:\n\n"); print_supported_pcidevs(nics_3com); + print_supported_pcidevs(drkaiser_pcidev); print_supported_pcidevs(satas_sii); exit(0); }

5 6

[commit] r713 - trunk
by svn＠flashrom.org 03 Sep '09

03 Sep '09

Author: uwe Date: 2009-09-03 01:27:45 +0200 (Thu, 03 Sep 2009) New Revision: 713 Added: trunk/drkaiser.c Log: Add drkaiser.c which was accidentally omitted in the last commit. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Added: trunk/drkaiser.c =================================================================== --- trunk/drkaiser.c (rev 0) +++ trunk/drkaiser.c 2009-09-02 23:27:45 UTC (rev 713) @@ -0,0 +1,79 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 TURBO J <turboj(a)web.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include "flash.h" + +#define PCI_VENDOR_ID_DRKAISER 0x1803 + +#define PCI_MAGIC_DRKAISER_ADDR 0x50 +#define PCI_MAGIC_DRKAISER_VALUE 0xa971 + +struct pcidev_status drkaiser_pcidev[] = { + {0x1803, 0x5057, PCI_OK, "Dr. Kaiser", "PC-Waechter (Actel FPGA)"}, + {}, +}; + +uint8_t *drkaiser_bar; + +int drkaiser_init(void) +{ + uint32_t addr; + + get_io_perms(); + pcidev_init(PCI_VENDOR_ID_DRKAISER, PCI_BASE_ADDRESS_2, + drkaiser_pcidev, programmer_param); + + /* Write magic register to enable flash write. */ + pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, + PCI_MAGIC_DRKAISER_VALUE); + + /* TODO: Mask lower bits? How many? 3? 7? */ + addr = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) & ~0x03; + + /* Map 128KB flash memory window. */ + drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", + addr, 128 * 1024); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + return 0; +} + +int drkaiser_shutdown(void) +{ + /* Write protect the flash again. */ + pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, 0); + free(programmer_param); + pci_cleanup(pacc); + release_io_perms(); + return 0; +}; + +void drkaiser_chip_writeb(uint8_t val, chipaddr addr) +{ + mmio_writeb(val, drkaiser_bar + addr); +} + +uint8_t drkaiser_chip_readb(const chipaddr addr) +{ + return mmio_readb(drkaiser_bar + addr); +}

1 0

[commit] r712 - trunk
by svn＠flashrom.org 03 Sep '09

03 Sep '09

Author: uwe Date: 2009-09-03 01:00:46 +0200 (Thu, 03 Sep 2009) New Revision: 712 Modified: trunk/Makefile trunk/flash.h trunk/flashrom.8 trunk/flashrom.c trunk/nic3com.c trunk/pcidev.c trunk/satasii.c Log: Add support for parallel flash on Dr. Kaiser PC-Waechter PCI devices. The vendor sold different designs under that name, the patch works with the one that has an Actel FPGA as PCI-to-Flash bridge. The Flash chip is a "Macronix MX29F001B" (128 KB, parallel) soldered directly to the PCB. Flash operations (PROBE, READ, ERASE, WRITE) work as expected. Signed-off-by: TURBO J <turboj(a)gmx.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/Makefile 2009-09-02 23:00:46 UTC (rev 712) @@ -50,7 +50,7 @@ flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o it87spi.o \ ichspi.o w39v040c.o sb600spi.o wbsio_spi.o m29f002.o internal.o \ dummyflasher.o pcidev.o nic3com.o satasii.o ft2232_spi.o \ - print.o + print.o drkaiser.o all: pciutils features dep $(PROGRAM) Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/flash.h 2009-09-02 23:00:46 UTC (rev 712) @@ -84,6 +84,7 @@ PROGRAMMER_INTERNAL, PROGRAMMER_DUMMY, PROGRAMMER_NIC3COM, + PROGRAMMER_DRKAISER, PROGRAMMER_SATASII, PROGRAMMER_IT87SPI, #if FT2232_SPI_SUPPORT == 1 @@ -281,8 +282,8 @@ const char *vendor_name; const char *device_name; }; -uint32_t pcidev_validate(struct pci_dev *dev, struct pcidev_status *devs); -uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs, char *pcidev_bdf); +uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, struct pcidev_status *devs); +uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, struct pcidev_status *devs, char *pcidev_bdf); /* print.c */ char *flashbuses_to_text(enum chipbustype bustype); @@ -387,6 +388,13 @@ uint8_t nic3com_chip_readb(const chipaddr addr); extern struct pcidev_status nics_3com[]; +/* drkaiser.c */ +int drkaiser_init(void); +int drkaiser_shutdown(void); +void drkaiser_chip_writeb(uint8_t val, chipaddr addr); +uint8_t drkaiser_chip_readb(const chipaddr addr); +extern struct pcidev_status drkaiser_pcidev[]; + /* satasii.c */ int satasii_init(void); int satasii_shutdown(void); Modified: trunk/flashrom.8 =================================================================== --- trunk/flashrom.8 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/flashrom.8 2009-09-02 23:00:46 UTC (rev 712) @@ -140,6 +140,8 @@ .sp .BR "* nic3com" " (for flash ROMs on 3COM network cards)" .sp +.BR "* drkaiser" " (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)" +.sp .BR "* satasii" " (for flash ROMs on Silicon Image SATA/IDE controllers)" .sp .BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI translation unit)" Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/flashrom.c 2009-09-02 23:00:46 UTC (rev 712) @@ -89,6 +89,23 @@ }, { + .name = "drkaiser", + .init = drkaiser_init, + .shutdown = drkaiser_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = drkaiser_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = drkaiser_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, + + { .name = "satasii", .init = satasii_init, .shutdown = satasii_shutdown, @@ -747,6 +764,7 @@ printf("\nSupported PCI devices flashrom can use " "as programmer:\n\n"); print_supported_pcidevs(nics_3com); + print_supported_pcidevs(drkaiser_pcidev); print_supported_pcidevs(satas_sii); exit(0); } Modified: trunk/nic3com.c =================================================================== --- trunk/nic3com.c 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/nic3com.c 2009-09-02 23:00:46 UTC (rev 712) @@ -58,7 +58,8 @@ { get_io_perms(); - io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, nics_3com, programmer_param); + io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, PCI_BASE_ADDRESS_0, + nics_3com, programmer_param); id = pcidev_dev->device_id; /* 3COM 3C90xB cards need a special fixup. */ Modified: trunk/pcidev.c =================================================================== --- trunk/pcidev.c 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/pcidev.c 2009-09-02 23:00:46 UTC (rev 712) @@ -28,7 +28,7 @@ struct pci_filter filter; struct pci_dev *pcidev_dev = NULL; -uint32_t pcidev_validate(struct pci_dev *dev, struct pcidev_status *devs) +uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, struct pcidev_status *devs) { int i; uint32_t addr; @@ -37,9 +37,9 @@ if (dev->device_id != devs[i].device_id) continue; - /* Don't use dev->base_addr[0], won't work on older libpci. */ - addr = pci_read_long(dev, PCI_BASE_ADDRESS_0) & ~0x03; - + /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ + addr = pci_read_long(dev, bar) & ~0x03; + printf("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", devs[i].vendor_name, devs[i].device_name, dev->vendor_id, dev->device_id, dev->bus, dev->dev, dev->func); @@ -57,7 +57,7 @@ return 0; } -uint32_t pcidev_init(uint16_t vendor_id, struct pcidev_status *devs, char *pcidev_bdf) +uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, struct pcidev_status *devs, char *pcidev_bdf) { struct pci_dev *dev; char *msg = NULL; @@ -80,7 +80,7 @@ for (dev = pacc->devices; dev; dev = dev->next) { if (pci_filter_match(&filter, dev)) { - if ((addr = pcidev_validate(dev, devs)) != 0) { + if ((addr = pcidev_validate(dev, bar, devs)) != 0) { curaddr = addr; pcidev_dev = dev; found++; Modified: trunk/satasii.c =================================================================== --- trunk/satasii.c 2009-09-02 22:09:00 UTC (rev 711) +++ trunk/satasii.c 2009-09-02 23:00:46 UTC (rev 712) @@ -47,7 +47,8 @@ get_io_perms(); - pcidev_init(PCI_VENDOR_ID_SII, satas_sii, programmer_param); + pcidev_init(PCI_VENDOR_ID_SII, PCI_BASE_ADDRESS_0, satas_sii, + programmer_param); id = pcidev_dev->device_id; if ((id == 0x3132) || (id == 0x3124)) {

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom