- flashrom - mail.coreboot.org

Gigabyte 7ZXE Rev 1.0
by Charles M 21 Dec '09

21 Dec '09

Here's the flashrom, lspci and superiotool information for the Gigabyte 7ZXE motherboard. From Gigabytes web site it looks like there have been at least a couple of revisions of this motherboard. This is revision 1.0. The link to Gigabyte's information on this site is: http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI… Cheers, Charles

1 0

MSI KM2M Combo
by Charles M 21 Dec '09

21 Dec '09

The MSI KM2M Combo is a Socket A (462) motherboard that sports 2 SDRAM and 2 DDR-SDRAM memory slots, 3 PCI slots and 1 AGP slot. I've attached the flashrom,lspci, and superiotool information for this board. Cheers, Charles

1 0

[PATCH] Intel Poulsbo chipset support
by Adam Jurkowski 21 Dec '09

21 Dec '09

Add support for Intel Poulsbo chipset. Signed-off-by: Adam Jurkowski <adam.jurkowski(a)kontron.pl>

3 6

ECS K7SOM+ motherboard
by Charles M 21 Dec '09

21 Dec '09

We semi-frequently see these ECS K7SOM+ motherboards and usually end up tossing them because the CPU soldered to the motherboard. The ECS web site dynamically generates pages but the manual still appears if you select Motherboard > Onboard and the K7SOM+. I've attached the flashrom, lspci and superiotool output. If anyone has further questions about the motherboard please email me directly and I'll investigate further. Charles McColm

1 0

Acer Ali 1631
by Charles M 21 Dec '09

21 Dec '09

This motherboard came to us in a beige box, so I can't comment on the particular model of motherboard. It shows as an Acer Ali 1631 as the Motherboard Model and Hsing Tech Enterprises as the motherboard OEM. Cheers, Charles

1 0

Intel D850GB "Intel Desktop Board"
by Charles M 21 Dec '09

21 Dec '09

The Intel D850GB has the words "Intel Desktop Board" imprinted on the motherboard, but it's pretty far from being a general user desktop motherboard. It sports 4 RAMBUS 600/800 slots and what looks to be a non-standard connector for power button and LEDs (but most cases could be rigged to fit). This motherboard is a single CPU Socket 423 motherboard. The manual can be found: http://www.intel.com/support/motherboards/desktop/d850gb/sb/cs-013247.htm If anyone has further questions about the motherboard please email me directly and I'll investigate further. Cheers, Charles

1 0

[PATCH] Boards: Fix several issues with nvidia_mcp_gpio_set.
by Luc Verhaegen 21 Dec '09

21 Dec '09

- CK804, MCP04, MCP2 use the isa bridges.. - Newer nvidia mcp's do use the smbus controllers (Found by Michael Karcher). - gpio line check breaks EPoX EP-8RDA3+, and should be wider. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 16 +++++++++++++--- 1 files changed, 13 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index 8b5ed95..2c58927 100644 --- a/board_enable.c +++ b/board_enable.c @@ -440,20 +440,30 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) uint16_t base; uint8_t tmp; - if ((gpio < 0) || (gpio > 31)) { + if ((gpio < 0) || (gpio > 0x40)) { fprintf(stderr, "\nERROR: unsupported GPIO: %d.\n", gpio); return -1; } - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + /* First, check the ISA Bridge */ + dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { case 0x0030: /* CK804 */ case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ break; default: - fprintf(stderr, "\nERROR: no nVidia SMBus controller found.\n"); + /* Newer MCPs use the SMBus Controller */ + dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + switch (dev->device_id) { + case 0x0264: /* MCP51 */ + break; + default: + fprintf(stderr, + "\nERROR: no nVidia LPC/SMBus controller found.\n"); return -1; + } + break; } base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ -- 1.6.0.2 --lrZ03NoBR/3+SXJZ--

1 0

Board enable requested
by Bill Maidment 21 Dec '09

21 Dec '09

Hello there. My motherboard is a Gigabyte GA-M51GM-S2G no version number apparent. The requested diagnostics are attached. BIOS downloads are available from http://www.giga-byte.com/Support/Motherboard/BIOS_Model.aspx?ProductID=2281 Please let me know when the board enable patch is available. Many thanks for the excellent service. Regards Bill -- Bill Maidment Maidment Enterprises Pty Ltd www.maidment.vu Consultant to Elgas Ltd Phone: 02 9904 3364

3 2

ASUS CUV4X-C
by Charles M 21 Dec '09

21 Dec '09

The ASUS CUV4X comes in a few varieties that our Computer Refurbishing project sees. This one is the -C version. Asus uses dynamic pages to distribute manuals, etc., and the manual from this baby can be found at http://support.asus.com/. This board is a socket 370 (Pentium III/Celeron) motherboard. If more data is required please email me and I can look into detailing the system more. (see attached flashrom,lspci,superiotools info). Charles McColm

1 0

[commit] r809 - trunk
by svn＠flashrom.org 21 Dec '09

21 Dec '09

Author: libv Date: 2009-12-21 16:30:46 +0100 (Mon, 21 Dec 2009) New Revision: 809 Modified: trunk/chipset_enable.c Log: Chipset: Add support for Intel Poulsbo chipset. Signed-off-by: Adam Jurkowski <adam.jurkowski(a)kontron.pl> Acked-by: Luc Verhaegen <libv(a)skynet.be> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-12-18 08:37:55 UTC (rev 808) +++ trunk/chipset_enable.c 2009-12-21 15:30:46 UTC (rev 809) @@ -5,6 +5,7 @@ * Copyright (C) 2005-2009 coresystems GmbH * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> * Copyright (C) 2007,2008,2009 Carl-Daniel Hailfinger + * Copyright (C) 2009 Kontron Modular Computers GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -391,6 +392,26 @@ return enable_flash_ich(dev, name, 0xdc); } +static int enable_flash_poulsbo(struct pci_dev *dev, const char *name) +{ + uint16_t old, new; + int err; + + if ((err = enable_flash_ich(dev, name, 0xd8)) != 0) + return err; + + old = pci_read_byte(dev, 0xd9); + printf_debug("BIOS Prefetch Enable: %sabled, ", + (old & 1) ? "en" : "dis"); + new = old & ~1; + + if (new != old) + pci_write_byte(dev, 0xd9, new); + + return 0; +} + + #define ICH_STRAP_RSVD 0x00 #define ICH_STRAP_SPI 0x01 #define ICH_STRAP_PCI 0x02 @@ -1155,6 +1176,7 @@ {0x8086, 0x7000, OK, "Intel", "PIIX3", enable_flash_piix4}, {0x8086, 0x7110, OK, "Intel", "PIIX4/4E/4M", enable_flash_piix4}, {0x8086, 0x122e, OK, "Intel", "PIIX", enable_flash_piix4}, + {0x8086, 0x8119, OK, "Intel", "Poulsbo", enable_flash_poulsbo}, {0x10de, 0x0030, OK, "NVIDIA", "nForce4/MCP4", enable_flash_nvidia_nforce2}, {0x10de, 0x0050, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* LPC */ {0x10de, 0x0051, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* Pro */

1 0

Fail to flash BIOS under ICH9R with descriptor mode
by eugenehsu 21 Dec '09

21 Dec '09

Hi I used the flashrom with SB ICH9R and flash chip SST SST25VF016B, and the descriptor mode is activated. The software version is flashrom-0.9.1 and pciutils-3.1.4. I failed to flash the BIOS. Please refer to the messages: =========================== DiskStation> ./flashrom -E flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel ICH9R", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x001fffff: 0x3000 ERASE FAILED! FAILED! ERROR at 0x00000000: Expected=0xff, Read=0x00 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! =========================== BTW, please find the "flashrom -E -V" messages in the attachment. Do you know how to solve this problem ? Thanks for your help. Eugene

2 1

[PATCH] Board: Add Gigabyte M51GM.
by Luc Verhaegen 21 Dec '09

21 Dec '09

The board ids match the M55Plus, but guess what, they require the same board enable ;) Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 16 +++++++++++++--- 1 files changed, 13 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index 8b5ed95..91d27ac 100644 --- a/board_enable.c +++ b/board_enable.c @@ -445,11 +445,12 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) return -1; } - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { - case 0x0030: /* CK804 */ - case 0x0050: /* MCP04 */ + case 0x0030: /* MCP04 */ + case 0x0050: /* CK804 */ case 0x0060: /* MCP2 */ + case 0x0260: /* MCP51 */ break; default: fprintf(stderr, "\nERROR: no nVidia SMBus controller found.\n"); @@ -494,6 +495,14 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for Gigabyte GA-M51GM-S2G: nVidia MCP51. + */ +static int nvidia_mcp_gpio3B_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x3B, 0x01); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1251,6 +1260,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1039, 0x0761, 0, 0, 0x10EC, 0x8168, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash}, {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", it8705_rom_write_enable}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", nvidia_mcp_gpio21_raise}, + {0x10DE, 0x02FA, 0x1458, 0x5000, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, "GIGABYTE", "GA-M51GM/M55plus", nvidia_mcp_gpio3B_raise}, {0x10DE, 0x0360, 0x1458, 0x0C11, 0x10DE, 0x0369, 0x1458, 0x5001, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash}, {0x10de, 0x03e0, 0, 0, 0x10DE, 0x03D0, 0, 0, NULL, NULL, "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash}, {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash}, -- 1.6.0.2 --AhhlLboLdkugWU4S--

1 0

Re: [flashrom] Scary error message
by Luc Verhaegen 21 Dec '09

21 Dec '09

On Sun, Dec 20, 2009 at 05:01:38PM -0800, Fraser Hanson wrote: > OK, tonight I checked out the latest flashrom from svn, patched it and > compiled it. > > I then tried to flash my bios with my original bios. > > The flash failed, as follows: > > fraser@ged:~/bios/flashrom$ sudo ./flashrom -w ../stock-bios.bin > flashrom v0.9.1-r808 > No coreboot table found. > Found chipset "NVIDIA CK804", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Disabling flash write protection for board "MSI K8N Neo4-F"... > ERROR: no nVidia SMBus controller found. > FAILED! > Calibrating delay loop... OK. > Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Programming page: ERASE FAILED at 0x00000000! > Expected=0xff, Read=0x49, failed byte count from > 0x00000000-0x0000ffff: 0x599 > ERASE FAILED! > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net (channel #flashrom) or > mail flashrom(a)flashrom.org! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! Ah, urgh, nvidia mcp gpio code is busted. Here is an updated patch. Luc Verhaegen.

1 0

[PATCH] Board: Add MSI K8N Neo4.
by Luc Verhaegen 21 Dec '09

21 Dec '09

Fix up nvidia_mcp_gpio_set while we are at it. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index 8b5ed95..fa71818 100644 --- a/board_enable.c +++ b/board_enable.c @@ -445,10 +445,10 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) return -1; } - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { - case 0x0030: /* CK804 */ - case 0x0050: /* MCP04 */ + case 0x0030: /* MCP04 */ + case 0x0050: /* CK804 */ case 0x0060: /* MCP2 */ break; default: @@ -470,6 +470,14 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) } /** + * Suited for MSI K8N Neo4: nVidia CK804. + */ +static int nvidia_mcp_gpio2_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x02, 1); +} + +/** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ static int nvidia_mcp_gpio10_raise(const char *name) @@ -1267,6 +1275,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, + {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, "MSI", "K8N Neo4-F", nvidia_mcp_gpio2_raise}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, "shuttle", "ak31", "Shuttle", "AK31", w836xx_memw_enable_2e}, {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", shuttle_ak38n}, {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25}, -- 1.6.0.2 --DocE+STaALJfprDB--

1 0

ASUS P4P800 SE
by Charles M 20 Dec '09

20 Dec '09

The ASUS P4P800 motherboard has a few variations - I've seen a few of these LGA755 boards come in (for repair - yikes), is the P4P800 SE variant. I have the physical paper manual and access to the motherboard. Cheers, Charles

1 0

Foxconn 946GZ7MA-KS2H (LGA775)
by Charles M 20 Dec '09

20 Dec '09

This motherboard actually resides in our home multimedia centre, it's not a great board, but it gets us by with the ATI video card we have in it. You can find the Foxconn specs at: http://www.foxconnchannel.com/product/Motherboards/detail_overview.aspx?ID=… Cheers, Charles p.s. Someone please tell me to stop if it's too much.

1 0

P2-BX (NOT ASUS)
by Charles M 20 Dec '09

20 Dec '09

The following motherboard is marked P2-BX but is NOT an ASUS motherboard despite a similar naming scheme. The board came into work with the paper motherboard manual (not at work at the moment). The manual is a very plain looking manual, not like Asus' typical documentation. Someone has incorrectly listed the P2-BX as an Asus motherboard on a couple of sites, but I can guarantee after looking closely at the board it's not. If I remember correctly it is a Slot 1 motherboard. Cheers, Charles

1 0

Intel D845GEBV2
by Charles M 20 Dec '09

20 Dec '09

The Intel D845GEBV2 motherboard is one we see every once in a while. Intel currently maintains documentation on this board here: http://www.intel.com/support/motherboards/desktop/D845GEBV2/ Charles

1 0

ASUSTEK CUSI-FX
by Charles M 20 Dec '09

20 Dec '09

We get quite a few ASUS motherboards, but the ASUSTEK CUSI-FX is one of the more interesting boards that we've come across lately. It's a Socket 370 motherboard (PIII). Asus has all motherboards available under the support section of their site. It's dynamically generated so you'll have to select MOTHERBOARDS > Socket 370 then CUSI-FX from: http://support.asus.com/download/download.aspx?SLanguage=en-us Regards, Charles

1 0

Aopen MX36-LE-UN
by Charles M 20 Dec '09

20 Dec '09

Here is the start of the motherboard information uploads. I managed to capture four motherboards in the last half hour of work. I'm at home now and have to run, but here's one of the 4. I'll upload the other 3 later when I get back. Aopen MX36-LE-UN Motherboard Motherboard manual link (GERMANY): http://download.aopen.com.tw/Download.aspx?RecNo=3771&Model=238&Section=10&… Cheers, Charles McColm

2 1

Requested Information
by Corey Hamilton 18 Dec '09

18 Dec '09

Hello, Thanks for helping me get to the bottom of this issue. It's much appreciated! Here's the info you've requested: Motherboard: Asus M2NBP-VM CSM Official BIOS URL: ftp://ftp.asus.com/pub/ASUS/mb/socketAM2/M2NBP-VM_CSM/1101.zip Verbose outputs follow... thanks again! Corey Verbose outputs as requested: ---- ~# flashrom -V flashrom v0.9.1-r710 No coreboot table found. Found chipset "NVIDIA MCP51", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 632M loops per second, 100 myus = 196 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x00, id2 0xff Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x24, id2 0x4e Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x24, id2 0x4e Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x24, id2 0x4e Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x24, id2 0x4e Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x45, id2 0xa3 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x45, id2 0xa3 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x24, id2 0x4e Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x24, id2 0x4e Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x24, id2 0x4e Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x24, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x45, id2 0xa3 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x24, id2 0x4e Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x9d, id2 0x6e Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. ---- ---- lspci output ---- 00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping 00: de 10 f0 02 06 00 b0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 43 10 c0 81 08 e0 e0 01 22 00 11 11 22 20 11 00 50: 23 05 7f 80 03 05 7f 80 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00 70: 44 44 41 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 1f 00 64 0c 03 00 00 00 7f 00 00 00 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 61 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 10 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- 00: de 10 fa 02 00 01 20 40 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 10 00 21 21 14 00 11 11 00 00 03 00 00 00 60: 21 88 13 02 de 8f e1 1f 08 72 4e 10 02 3f 00 20 70: 10 32 54 0a 10 00 00 00 a0 00 00 00 10 00 01 01 80: 00 00 00 00 00 00 00 00 00 00 50 3f 90 3f 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 01 00 00 00 80 f9 fd 00 e0: 00 00 c9 fe 00 00 00 00 00 fc ff ff 00 00 00 00 f0: 00 00 00 00 c7 02 32 00 00 00 00 00 00 00 00 00 00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 43 10 c0 81 1f 20 1c 20 1f 20 c0 21 00 00 00 00 50: 36 00 38 c9 01 00 00 00 39 00 3b c9 02 1f 1c 80 60: 02 1f 1c 00 00 00 00 00 02 10 1c a0 02 0c 1c 90 70: 02 10 1c 90 02 14 1c 90 02 0c 1c 80 02 10 1c 80 80: 02 14 1c 80 02 18 1c 80 02 1c 1c 80 01 10 1c 80 90: 02 10 1c 80 11 00 11 00 32 01 00 00 00 00 00 00 a0: c2 00 40 21 10 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 41 23 05 08 c0: fd ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: de 10 f8 02 00 00 a0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 43 10 c0 81 00 00 00 00 02 10 1c 80 02 10 1c a0 50: 02 0c 1c 90 02 10 1c 90 02 14 1c 90 02 0c 1c 80 60: 02 10 1c 80 02 14 1c 80 02 18 1c 80 02 1c 1c 80 70: 01 10 1c 80 1f 20 c0 81 00 00 00 00 3e 30 40 c9 80: 01 00 00 00 45 30 47 c9 02 1f 1c 80 70 20 00 40 90: 89 da 01 09 00 00 00 00 11 00 10 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 08 00 00 00 e4 18 00 00 10 00 02 00 40 14 00 14 c0: 00 00 00 00 00 00 00 00 01 01 00 05 00 00 00 00 d0: 00 00 f0 03 00 04 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 60 ea 10 10 18 00 00 20 00 00 00 00 00 00 00 00 00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: de 10 f9 02 06 00 a0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: ef dd 7b 2f f7 de 7b 2f f7 de 7b 2f f7 02 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 70: 0a 00 00 00 03 00 00 00 25 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 05 00 00 00 04 00 00 00 90: 03 04 00 00 01 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: ff 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 00: de 10 ff 02 06 00 b0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 17 00 00 00 00 fe fe 00 00 fe fe 00 00 fe fe 00 50: 00 fe fe 00 00 fe fe 00 00 fe fe 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: de 10 7f 02 02 01 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 08 00 00 00 00 00 00 00 00 80 cb fe 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 43 10 c0 81 11 00 00 00 64 06 00 00 11 00 00 00 50: 63 06 00 00 40 00 70 00 70 60 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04 b0: ff ff 03 00 10 11 00 00 ac 10 20 00 30 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 41a9 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00: de 10 fc 02 07 04 10 00 a1 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 a1 a1 00 00 20: 80 fd 80 fd 71 fd 71 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 a9 41 00 00 60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 1f 28 00 00 11 3c 11 02 90: 00 00 11 10 00 00 00 00 c0 01 00 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 41b1 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00: de 10 fd 02 07 04 10 00 a1 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 81 81 00 00 20: e0 fd e0 fd d1 fd d1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 b1 41 00 00 60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 1f 28 00 00 11 3c 11 01 90: 00 00 11 10 00 00 00 00 c0 01 00 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0100c Data: 41b9 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00: de 10 fb 02 07 04 10 00 a1 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 b1 b1 00 00 20: c0 fd c0 fd 91 fd 91 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c 10 e0 fe 00 00 00 00 b9 41 00 00 60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 1f 28 00 00 01 3d 11 00 90: 00 00 01 11 00 00 00 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Quadro NVS 210S/GeForce 6150LE] [10de:0245] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81cd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 50000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 00: de 10 45 02 07 00 b0 00 a2 00 00 03 00 00 00 00 10: 00 00 00 fc 0c 00 00 d0 00 00 00 00 04 00 00 fb 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81 30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00 40: 43 10 cd 81 00 00 00 00 01 50 02 00 00 00 00 00 50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 00 00 7c 00 00 00 00 02 00 00 00 00 ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping 00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 43 10 c0 81 08 e0 e9 01 22 20 00 00 d0 00 00 00 50: 23 05 7f 80 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 05 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 55 00 80: 23 55 55 00 fa 00 64 0c 03 00 00 00 7f 00 00 00 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: de 10 60 02 0f 00 a0 00 a3 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 43 10 c0 81 00 f0 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff 70: 10 00 ff ff c5 00 00 00 00 00 45 19 00 00 00 03 80: 09 10 00 81 02 2d 00 00 c0 00 00 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 21 47 65 b7 ef cd 00 00 a0: 01 00 10 c1 00 00 00 00 00 00 00 00 00 00 00 00 b0: 90 02 ef 02 00 08 5f 08 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 4c00 [size=64] Region 5: I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: de 10 64 02 01 00 b0 00 a3 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 4c 00 00 41 4c 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00 40: 43 10 c0 81 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 40 00 00 01 44 00 00 01 48 00 00 00 00 00 00 70: 01 00 00 00 00 00 c8 fe 00 00 fe fe 01 20 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 01 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 10 04 00 00 a0 00 00 80 30 00 00 41 44 44 11 f0: 5a ff 5f bf 00 00 00 c0 10 00 00 00 00 00 00 00 00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: de 10 72 02 00 04 a0 00 a3 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 10 00 00 10 00 00 10 10 50: 10 10 10 10 00 00 00 00 00 00 00 00 00 00 00 00 60: 02 03 00 00 12 00 00 00 02 00 00 00 10 01 12 00 70: 32 33 00 00 03 00 00 00 00 00 00 00 12 01 00 00 80: 10 00 00 00 00 00 00 00 00 00 00 00 30 02 00 00 90: 00 00 00 00 01 20 00 00 01 00 00 00 00 09 00 00 a0: 01 02 00 00 00 10 00 00 05 00 00 00 01 00 00 00 b0: 00 10 00 80 01 00 00 80 00 00 00 00 02 00 00 00 c0: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: de 10 6d 02 07 00 b0 00 a3 10 03 0c 00 00 80 00 10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 43 10 c0 81 01 00 02 fe 00 00 00 00 00 00 00 00 50: 03 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 00: de 10 6e 02 06 00 b0 00 a3 20 03 0c 00 00 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01 40: 43 10 c0 81 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 0a 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 04 00 80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 11 22 33 00 00 00 00 ff 00 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Unknown device [f043:81c0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f4 00 00 00 00 00 00 00 00 00 00 43 f0 c0 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 43 f0 c0 81 01 00 02 00 00 00 00 00 00 00 00 00 50: 03 f0 01 00 00 00 00 00 99 99 99 99 aa 00 a8 a8 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:9999] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at e000 [size=16] Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping 00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 e0 00 00 00 d0 02 fe 00 00 00 00 43 10 99 99 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 43 10 99 99 01 b0 02 00 00 00 00 00 00 00 00 00 50: 03 00 00 00 00 00 00 00 a8 a8 a8 a8 aa 00 99 99 60: 00 00 00 00 51 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 00 01 00 11 08 00 00 d0 00 28 08 88 0c 90: 00 00 2d 1a 00 00 00 00 06 00 06 10 00 00 01 01 a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 01 00 02 6b 42 00 00 00 00 00 00 00 0f 00 b0 07 e0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 20 00 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:9999] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at cc00 [size=16] Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping 00: de 10 67 02 07 00 b0 00 a1 85 01 01 00 00 00 00 10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00 20: 01 cc 00 00 00 c0 02 fe 00 00 00 00 43 10 99 99 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 43 10 99 99 01 b0 02 00 00 00 00 00 00 00 00 00 50: 03 00 00 00 00 00 00 00 a8 a8 a8 a8 aa 00 99 99 60: 00 00 00 00 51 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 00 41 06 09 08 00 00 05 03 8b 81 a2 80 90: 00 00 e4 19 00 00 00 00 06 00 06 10 00 00 01 01 a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 f0 07 e0: 01 00 02 6b 42 00 00 00 00 00 00 00 00 00 30 00 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=128 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000] Capabilities: [8c] HyperTransport: MSI Mapping 00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 04 80 90 90 80 02 20: b0 fd b0 fd a0 fd a0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02 40: 00 00 03 00 01 00 02 00 07 00 00 00 00 00 4c 00 50: 00 00 fe 3f 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 00 00 00 00 c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81b3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping 00: de 10 6c 02 06 00 b0 00 a2 00 03 04 00 00 80 00 10: 00 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 b3 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05 40: 43 10 b3 81 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 46 00 29 00 00 00 00 00 00 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:816a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping 00: de 10 69 02 07 00 b0 00 a3 00 80 06 00 00 00 00 10: 00 b0 02 fe 01 c8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 6a 81 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14 40: 43 10 6a 81 01 50 02 fe 00 01 00 00 0b 00 00 00 50: 05 6c 84 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 20 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 05 35 80 02 00 00 00 90: 69 01 61 01 00 00 04 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 90: 03 00 40 00 00 ff df 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 02 fe 00 b0: 03 00 e0 00 80 4f e0 00 00 00 00 00 00 00 00 00 c0: 13 80 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 81 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 60 3f 38 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 00 02 00 00 00 00 00 00 24 f2 7d 0c 20 13 02 04 90: 10 04 01 00 5b 80 10 77 24 00 00 80 20 25 2b 00 a0: ff 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 b0: 1b 9c 7f 93 80 00 00 00 36 1d 00 50 a2 06 c0 22 c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 28 20 41 3e 89 00 05 21 1a d9 c1 24 00 90 90 b0 e0: 9a 40 e9 36 9f f1 82 17 85 10 98 38 2f 32 80 38 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 01 00 00 40 00 10 02 00 00 00 00 00 00 00 00 50: f8 40 b4 57 b7 00 00 00 00 00 00 00 40 79 8a 91 60: e7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 32 51 21 40 70 50 00 2a 00 08 18 21 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 70 35 89 b7 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 80 08 26 26 26 00 e0: 00 00 00 00 36 d9 3f 00 01 05 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 f1 0f 07 00 ---- ---- superiotool -deV output ---- superiotool r4931 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Found ITE IT8716F (id=0x8716, rev=0x1) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 16 01 01 00 00 def 87 16 01 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 01 03 f0 06 02 00 80 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 01 03 f8 04 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 00 00 00 00 00 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 01 03 78 00 00 07 04 09 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 01 02 90 00 00 00 00 00 0a 00 8a 00 3f def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 68 def 01 00 60 00 64 01 02 00 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd val 00 00 00 00 00 00 1f 00 00 08 00 00 00 00 00 00 38 00 00 00 00 00 00 00 20 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 39 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 LDN 0x08 (MIDI port) idx 30 60 61 70 f0 val 00 03 00 0a 00 def 00 03 00 0a 00 LDN 0x09 (Game port) idx 30 60 61 val 00 02 01 def 00 02 01 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 00 Environment controller (0x0295) Register dump: idx 00 04 05 06 07 08 09 0b 0c 10 11 12 13 14 15 16 17 1b 1c 1d 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 48 50 51 52 53 54 56 57 59 5c 5d 5e 5f 60 61 62 63 64 65 68 69 6a 6b 6c 6d 70 71 72 73 74 75 84 85 86 87 88 89 8c 8d 8e 8f 90 91 92 93 94 95 98 99 9a 9b 9c 9d val 11 00 00 00 00 00 80 09 07 d0 d0 ff 70 d7 80 81 82 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 2d ff 31 7f 7f 7f f5 00 00 60 00 00 00 00 19 7f 21 90 03 14 19 48 21 90 80 7f 7f 7f 00 00 03 ff ff ff ff 00 00 02 00 99 99 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f def 18 00 00 00 00 00 80 09 00 NA NA NA 07 50 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA RR 00 00 7f 7f 7f 00 00 00 00 00 00 00 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f NA NA NA NA 00 00 02 00 99 99 7f 7f 7f 00 00 7f 7f 7f 7f 00 00 7f Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

1 0

[PATCH] Add board enable for ECS K7S6A.
by Luc Verhaegen 18 Dec '09

18 Dec '09

Please use the recent svn, and apply http://patchwork.coreboot.org/patch/635/ first. When this works, please send: Acked-by: [realname here] <spirals(a)eircom.net> Luc Verhaegen.

2 1

Re: [flashrom] [commit] r806 - trunk
by Luc Verhaegen 18 Dec '09

18 Dec '09

On Thu, Dec 17, 2009 at 04:20:02PM +0100, svn(a)flashrom.org wrote: > - Set board-specific max decode size for Elitegroup K7VTA3. > - Set board-specific max decode size for Shuttle AK38N. > > Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> > > > Modified: trunk/board_enable.c > =================================================================== > --- trunk/board_enable.c 2009-12-17 04:22:40 UTC (rev 805) > +++ trunk/board_enable.c 2009-12-17 15:20:01 UTC (rev 806) > @@ -987,16 +987,24 @@ > } > > /** > - * Suited for: > - * - Shuttle AK38N: VIA KT333CF + VIA VT8235 + ITE IT8705F > - * - Elitegroup K7VTA3: VIA Apollo KT266/A/333 + VIA VT8235 + ITE IT8705F > + * Suited for: Elitegroup K7VTA3: VIA Apollo KT266/A/333 + VIA VT8235 + ITE IT8705F > */ > -static int it8705f_write_enable_2e(const char *name) > +static int elitegroup_k7vta3(const char *name) > { > + max_rom_decode.parallel = 256 * 1024; > return it8705f_write_enable(0x2e, name); > } > > /** > + * Suited for: Shuttle AK38N: VIA KT333CF + VIA VT8235 + ITE IT8705F > + */ > +static int shuttle_ak38n(const char *name) > +{ > + max_rom_decode.parallel = 256 * 1024; > + return it8705f_write_enable(0x2e, name); > +} > + > +/** What happened here, and why do we require two different entries here? Luc Verhaegen.

2 1

Re: [flashrom] cannot work on Intel ICH7/ICH7R & SST SST25VF016B (2048 KB, SPI)
by Carl-Daniel Hailfinger 18 Dec '09

18 Dec '09

Hi Water, I am working on a patch which will fix the problem you're seeing. Unfortunately the ICH SPI driver has a few bugs which need to be fixed first. My patch is almost ready. On 15.12.2009 03:25, Water Chen wrote: > Could you kindly check a patch for SST25VF016B? > Your patch was a great help for me because it pinpointed the problem exactly. However, it had a few unfortunate side effects which break flashing on other chips. I will keep you updated about my progress. Regards, Carl-Daniel -- Developer quote of the month: "We are juggling too many chainsaws and flaming arrows and tigers."

2 2

Re: [flashrom] flash erase failure
by Thao Hoang 18 Dec '09

18 Dec '09

Opps sorry... This time the files are attached! The output.txt has both the flashrom and lspci results. This is for the ibase motherboard. I'll send you the the set of files for the laptop in the next e-mail. :) Thao --- On Mon, 11/23/09, Adrian Glaubitz <adrian.glaubitz(a)googlemail.com> wrote: From: Adrian Glaubitz <adrian.glaubitz(a)googlemail.com> Subject: Re: [flashrom] flash erase failure To: "Thao Hoang" <thao_hoang(a)yahoo.com>, flashrom(a)flashrom.org Date: Monday, November 23, 2009, 5:57 PM Hi, On Mon, Nov 23, 2009 at 10:52 PM, Thao Hoang <thao_hoang(a)yahoo.com> wrote: > > Thanks Adrian! I appreciate the advice and insight. You're welcome, again. > I was not able to run superiotool because it wasn't install on my system, however I did run the other two. > See attachment. If you really need me to run superiotool, I can download it and run it. > Yes, please install it. It would be nice to have a full output of: lspci -nnvvvxx superiotool -dV flashrom -V By the way, I don't see your attachments, did you forget them (thats what I usually do :)). Please post the put of all three tools like I suggested to the mailing list (flashrom(a)flashrom.org), that will help us with your board. > Don't laugh... but I haven't used IRC chat before. Never had a reason to until now I guess. Is there a way to post the chats somewhere so that anyone with a similar problem can go there without taking up your time? hum... > Well, really, IRC is nothing magical or mystical. Just use any IRC-capable software to connect (like irssi, pidgin, xchat or mIRC). Set the server to irc.freenode.org and the channel to #flashrom. Then just start asking questions and many people will be happy to help you and answer all your questions. > Also, did I get the syntax correct to force a write <./flashrom -f -w (filename) -c (chipname)>. Yes, think so. Check the manpage. > I have a laptop also that doesn't seem to work off the bat. I was able to force the read and > find some chips that successfullly read the bios. (i.e.... forced read and compared the result > using the original binary which I extracted using a dos bios utility.) Mhh, okey. Don't hesitate to post all your results to the mailing list. Please post every laptop and mainboard and whatever your try to flash in a single mail to the mailing list. And seriously, join the IRC-channel. You'll learn alot of stuff there. Adrian

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom