- flashrom - mail.coreboot.org

[commit] r974 - trunk
by repository service 24 Mar '10

24 Mar '10

Author: mkarcher Date: Wed Mar 24 23:55:50 2010 New Revision: 974 URL: http://flashrom.org/trac/coreboot/changeset/974 Log: Probe/Read tested for SST29EE020A http://www.flashrom.org/pipermail/flashrom/2010-February/002318.html Thanks to Andre Robatino for reporting! Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Mar 24 18:55:04 2010 (r973) +++ trunk/flashchips.c Wed Mar 24 23:55:50 2010 (r974) @@ -3796,7 +3796,7 @@ .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers =

1 0

[commit] r973 - trunk
by repository service 24 Mar '10

24 Mar '10

Author: mkarcher Date: Wed Mar 24 18:55:04 2010 New Revision: 973 URL: http://flashrom.org/trac/coreboot/changeset/973 Log: Fix handling of empty dmidecode output Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dmi.c Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Tue Mar 23 18:10:28 2010 (r972) +++ trunk/dmi.c Wed Mar 24 18:55:04 2010 (r973) @@ -56,11 +56,14 @@ printf_debug("DMI pipe open error\n"); return NULL; } - if (!fgets(answerbuf, DMI_MAX_ANSWER_LEN, dmidecode_pipe) && - ferror(dmidecode_pipe)) { - printf_debug("DMI pipe read error\n"); - pclose(dmidecode_pipe); - return NULL; + if (!fgets(answerbuf, DMI_MAX_ANSWER_LEN, dmidecode_pipe)) { + if(ferror(dmidecode_pipe)) { + printf_debug("DMI pipe read error\n"); + pclose(dmidecode_pipe); + return NULL; + } else { + answerbuf[0] = 0; /* Hit EOF */ + } } /* Toss all output above DMI_MAX_ANSWER_LEN away to prevent deadlock on pclose. */

1 0

Abit VT6X4/W29C020C success report
by Michael Karcher 24 Mar '10

24 Mar '10

This log appeared in our pastebin, it shows that W29C020C on an Abit VT6X4 board works fine. Regards, Michael Karcher $ sudo flashrom -m abit:vt6x4 -r original.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. $ sudo flashrom -m abit:vt6x4 -r old_chip.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. $ sudo flashrom -m abit:vt6x4 -E flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === @@Erasing flash chip... SUCCESS. $ sudo flashrom -m abit:vt6x4 -r old_chip_erased.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. $ sudo flashrom -m abit:vt6x4 -w original.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. @@Writing flash chip... Programming page: 2047 at address: 0x0003ff80 @@COMPLETE. @@Verifying flash... VERIFIED. $ sudo flashrom -m abit:vt6x4 -v original.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. @@Verifying flash... VERIFIED. $ sudo flashrom -m abit:vt6x4 -r old_chip_written.bin flashrom v0.9.1-r908 No coreboot table found. Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "Abit VT6X4"... VIA Apollo ACPI: Dropping GPIO04. OK. Calibrating delay loop... OK. Found chip "Winbond W29C020C" (256 KB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done.

1 0

[pastebin forward] AT29C010A/A7V133
by Michael Karcher 24 Mar '10

24 Mar '10

This dumps have appeared in coreboot.pastebin.com. They show correct function on Asus A7V133 with an AT29C010A chip (unsure whether that one is original). Regards, Michael Karcher $ sudo flashrom -V flashrom v0.9.1-r909 No coreboot table found. DMI string 0: "System Manufacturer" DMI string 1: "System Name" DMI string 2: "System Version" DMI string 3: "ASUSTeK Computer INC." DMI string 4: "<A7V133>" DMI string 5: "REV 1.xx" Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 543M loops per second, 100 myus = 163 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Found chip "Atmel AT29C010A" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x5f, id2 0x1f Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x5f, id2 0x1f Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. $ sudo flashrom -rV test_read.bin flashrom v0.9.1-r909 No coreboot table found. DMI string 0: "System Manufacturer" DMI string 1: "System Name" DMI string 2: "System Version" DMI string 3: "ASUSTeK Computer INC." DMI string 4: "<A7V133>" DMI string 5: "REV 1.xx" Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 541M loops per second, 100 myus = 162 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Found chip "Atmel AT29C010A" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x5f, id2 0x1f Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x5f, id2 0x1f Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === @@Reading flash... done. $ sudo flashrom -EV flashrom v0.9.1-r909 No coreboot table found. DMI string 0: "System Manufacturer" DMI string 1: "System Name" DMI string 2: "System Version" DMI string 3: "ASUSTeK Computer INC." DMI string 4: "<A7V133>" DMI string 5: "REV 1.xx" Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 539M loops per second, 100 myus = 162 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Found chip "Atmel AT29C010A" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x5f, id2 0x1f Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x5f, id2 0x1f Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x0a Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x01ffff, @@SUCCESS. $ sudo flashrom -wV test_read.bin flashrom v0.9.1-r909 No coreboot table found. DMI string 0: "System Manufacturer" DMI string 1: "System Name" DMI string 2: "System Version" DMI string 3: "ASUSTeK Computer INC." DMI string 4: "<A7V133>" DMI string 5: "REV 1.xx" Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 538M loops per second, 100 myus = 161 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Found chip "Atmel AT29C010A" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x5f, id2 0x1f Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x5f, id2 0x1f Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x5f, id2 0x1f Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x5f, id2 0x1f Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xd5 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: 1023 at address: 0x0001ff80 @@COMPLETE. @@Verifying flash... VERIFIED.

1 0

[PATCH] Fix handling of empty dmidecode output
by Michael Karcher 24 Mar '10

24 Mar '10

Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- dmi.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-) diff --git a/dmi.c b/dmi.c index 716a7c6..d9f307f 100644 --- a/dmi.c +++ b/dmi.c @@ -56,11 +56,14 @@ static char *get_dmi_string(const char *string_name) printf_debug("DMI pipe open error\n"); return NULL; } - if (!fgets(answerbuf, DMI_MAX_ANSWER_LEN, dmidecode_pipe) && - ferror(dmidecode_pipe)) { - printf_debug("DMI pipe read error\n"); - pclose(dmidecode_pipe); - return NULL; + if (!fgets(answerbuf, DMI_MAX_ANSWER_LEN, dmidecode_pipe)) { + if(ferror(dmidecode_pipe)) { + printf_debug("DMI pipe read error\n"); + pclose(dmidecode_pipe); + return NULL; + } else { + answerbuf[0] = 0; /* Hit EOF */ + } } /* Toss all output above DMI_MAX_ANSWER_LEN away to prevent deadlock on pclose. */ -- 1.7.0

1 0

No DMI for ST M50FW080
by Joseph Smith 24 Mar '10

24 Mar '10

see attached log. -- Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org

1 0

[PATCH] clean up sst49lfxxxc.c
by Sean Nelson 23 Mar '10

23 Mar '10

Sst49lfxxxc chips are functionally the same as 82802ab chips. Sst49lfxxxc software status register is functionally the same as the 82802ab status register, "Block Protect Status"(49lfxxxc) can be treated the same as "Device Protect Status"(82802ab). Erase_block_49lfxxxc is the same command sequence as erase_block_82802ab. Add unlock_49lfxxxc to chips definitions. Write_sector_49lfxxxc is the same as write_page_82802ab. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 2

[commit] r972 - trunk
by repository service 23 Mar '10

23 Mar '10

Author: snelson Date: Tue Mar 23 18:10:28 2010 New Revision: 972 URL: http://flashrom.org/trac/coreboot/changeset/972 Log: Sst49lfxxxc chips are functionally the same as 82802ab chips. Sst49lfxxxc software status register is functionally the same as the 82802ab status register, "Block Protect Status"(49lfxxxc) can be treated the same as "Device Protect Status"(82802ab). Erase_block_49lfxxxc is the same command sequence as erase_block_82802ab. Add unlock_49lfxxxc to chips definitions. Write_sector_49lfxxxc is the same as write_page_82802ab. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/sst49lfxxxc.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Tue Mar 23 00:47:38 2010 (r971) +++ trunk/chipdrivers.h Tue Mar 23 18:10:28 2010 (r972) @@ -100,11 +100,7 @@ int write_28sf040(struct flashchip *flash, uint8_t *buf); /* sst49lfxxxc.c */ -int probe_49lfxxxc(struct flashchip *flash); -int erase_49lfxxxc(struct flashchip *flash); int erase_sector_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int erase_block_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int sector_size); -int erase_chip_49lfxxxc(struct flashchip *flash, unsigned int addr, unsigned int blocksize); int write_49lfxxxc(struct flashchip *flash, uint8_t *buf); int unlock_49lfxxxc(struct flashchip *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Mar 23 00:47:38 2010 (r971) +++ trunk/flashchips.c Tue Mar 23 18:10:28 2010 (r972) @@ -4190,9 +4190,10 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_49lfxxxc, + .block_erase = erase_block_82802ab, } }, + .unlock = unlock_49lfxxxc, .write = write_49lfxxxc, .read = read_memmapped, }, @@ -4252,9 +4253,10 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_49lfxxxc, + .block_erase = erase_block_82802ab, } }, + .unlock = unlock_49lfxxxc, .write = write_49lfxxxc, .read = read_memmapped, }, @@ -4283,9 +4285,10 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_49lfxxxc, + .block_erase = erase_block_82802ab, } }, + .unlock = unlock_49lfxxxc, .write = write_49lfxxxc, .read = read_memmapped, }, @@ -4459,7 +4462,7 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_49lfxxxc, + .block_erase = erase_block_82802ab, } }, .unlock = unlock_49lfxxxc, Modified: trunk/sst49lfxxxc.c ============================================================================== --- trunk/sst49lfxxxc.c Tue Mar 23 00:47:38 2010 (r971) +++ trunk/sst49lfxxxc.c Tue Mar 23 18:10:28 2010 (r972) @@ -24,19 +24,6 @@ #include "flash.h" #include "chipdrivers.h" -#define SECTOR_ERASE 0x30 -#define BLOCK_ERASE 0x20 -#define ERASE 0xD0 -#define AUTO_PGRM 0x10 -#define RESET 0xFF -#define READ_ID 0x90 -#define READ_STATUS 0x70 -#define CLEAR_STATUS 0x50 - -#define STATUS_BPS (1 << 1) -#define STATUS_ESS (1 << 6) -#define STATUS_WSMS (1 << 7) - int unlock_block_49lfxxxc(struct flashchip *flash, unsigned long address, unsigned char bits) { unsigned long lock = flash->virtual_registers + address + 2; @@ -90,21 +77,13 @@ int erase_sector_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int sector_size) { - unsigned char status; + uint8_t status; chipaddr bios = flash->virtual_memory; - chip_writeb(SECTOR_ERASE, bios); - chip_writeb(ERASE, bios + address); + chip_writeb(0x30, bios); + chip_writeb(0xD0, bios + address); - do { - status = chip_readb(bios); - if (status & (STATUS_ESS | STATUS_BPS)) { - printf("sector erase FAILED at address=0x%08lx status=0x%01x\n", bios + address, status); - chip_writeb(CLEAR_STATUS, bios); - return (-1); - } - } while (!(status & STATUS_WSMS)); - chip_writeb(RESET, bios); + status = wait_82802ab(bios); if (check_erased_range(flash, address, sector_size)) { fprintf(stderr, "ERASE FAILED!\n"); @@ -113,101 +92,6 @@ return 0; } -int erase_block_49lfxxxc(struct flashchip *flash, unsigned int address, unsigned int block_size) -{ - unsigned char status; - chipaddr bios = flash->virtual_memory; - - chip_writeb(BLOCK_ERASE, bios); - chip_writeb(ERASE, bios + address); - - do { - status = chip_readb(bios); - if (status & (STATUS_ESS | STATUS_BPS)) { - printf("block erase FAILED at address=0x%08lx status=0x%01x\n", bios + address, status); - chip_writeb(CLEAR_STATUS, bios); - return (-1); - } - } while (!(status & STATUS_WSMS)); - chip_writeb(RESET, bios); - - if (check_erased_range(flash, address, block_size)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - return 0; -} - -static int write_sector_49lfxxxc(chipaddr bios, uint8_t *src, chipaddr dst, - unsigned int page_size) -{ - int i; - unsigned char status; - - chip_writeb(CLEAR_STATUS, bios); - for (i = 0; i < page_size; i++) { - /* transfer data from source to destination */ - if (*src == 0xFF) { - dst++, src++; - /* If the data is 0xFF, don't program it */ - continue; - } - /*issue AUTO PROGRAM command */ - chip_writeb(AUTO_PGRM, bios); - chip_writeb(*src++, dst++); - - do { - status = chip_readb(bios); - if (status & (STATUS_ESS | STATUS_BPS)) { - printf("sector write FAILED at address=0x%08lx status=0x%01x\n", dst, status); - chip_writeb(CLEAR_STATUS, bios); - return (-1); - } - } while (!(status & STATUS_WSMS)); - } - - return 0; -} - -int probe_49lfxxxc(struct flashchip *flash) -{ - chipaddr bios = flash->virtual_memory; - uint8_t id1, id2; - - chip_writeb(RESET, bios); - - chip_writeb(READ_ID, bios); - id1 = chip_readb(bios); - id2 = chip_readb(bios + 0x01); - - chip_writeb(RESET, bios); - - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); - - if (!(id1 == flash->manufacture_id && id2 == flash->model_id)) - return 0; - - map_flash_registers(flash); - - return 1; -} - -int erase_49lfxxxc(struct flashchip *flash) -{ - chipaddr bios = flash->virtual_memory; - int i; - unsigned int total_size = flash->total_size * 1024; - - write_lockbits_49lfxxxc(flash, 0); - for (i = 0; i < total_size; i += flash->page_size) - if (erase_sector_49lfxxxc(flash, i, flash->page_size)) - return (-1); - - chip_writeb(RESET, bios); - - return 0; -} - int write_49lfxxxc(struct flashchip *flash, uint8_t *buf) { int i; @@ -226,13 +110,13 @@ /* write to the sector */ printf("%04d at address: 0x%08x", i, i * page_size); - write_sector_49lfxxxc(bios, buf + i * page_size, + write_page_82802ab(bios, buf + i * page_size, bios + i * page_size, page_size); printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); } printf("\n"); - chip_writeb(RESET, bios); + chip_writeb(0xFF, bios); return 0; }

1 0

succesful flash write on Supermicro X8DTT-F
by Taylan Develioglu 23 Mar '10

23 Mar '10

Succesfully perfomed flashrom -w on the SM X8DTT-F, requested details are attached. Official BIOS downloads are from: http://www.supermicro.com/support/bios/

1 0

Re: [flashrom] [PATCH] Probe/Read tested for SST29EE020A
by Carl-Daniel Hailfinger 23 Mar '10

23 Mar '10

On 19.02.2010 11:08, Michael Karcher wrote: > http://www.flashrom.org/pipermail/flashrom/2010-February/002318.html > > Should we commit single patches for each positive test report we get, > or collect them? > Not sure. I think collecting them and committing once a week (or something like that) would help keep the number of patches down. > --- a/flashchips.c > +++ b/flashchips.c > @@ -3763,7 +3763,7 @@ struct flashchip flashchips[] = { > .total_size = 256, > .page_size = 128, > .feature_bits = FEATURE_LONG_RESET, > - .tested = TEST_UNTESTED, > + .tested = TEST_OK_PR, > .probe = probe_jedec, > I propose to have people test probe_jedec with full address bits and restricted address bits. If both work, we might as well use the full version (same for all other operations of the chip) and note it somewhere that the upper bits are "don't care". Maybe we'll get to a point where we can run probe_jedec just once per chip size instead of once per size+addressbits+delay combination in flashchips.c which would be an alternative to the current code. Long term goal, feel free to ignore. Regards, Carl-Daniel -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

1 1

[PATCH] Check if 82802ab probe reads real IDs
by Carl-Daniel Hailfinger 23 Mar '10

23 Mar '10

JEDEC ID probing checks the parity of the vendor ID and verifies that the ID differs from the flash chip contents. Add the same feature to 82802AB ID probing. This should reduce the number of lines we have to look at to determine if we're missing a chip definition or if we need a board enable. Just use grep on the log: grep -v "parity violation" To narrow it down further, try: grep -v "id1 is normal flash content, id2 is normal flash content" And of course you want to ignore the skipped probes: grep -v "skipped" The remaining lines are worth examining, and if those look bogus as well, you can bet that we just need a board enable. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-82802ab_probe_check_parity/82802ab.c =================================================================== --- flashrom-82802ab_probe_check_parity/82802ab.c (Revision 969) +++ flashrom-82802ab_probe_check_parity/82802ab.c (Arbeitskopie) @@ -47,6 +47,7 @@ { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; + uint8_t flashcontent1, flashcontent2; /* Reset to get a clean state */ chip_writeb(0xFF, bios); @@ -64,8 +65,21 @@ programmer_delay(10); - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); + printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); + if (!oddparity(id1)) + printf_debug(", id1 parity violation"); + + /* Read the product ID location again. We should now see normal flash contents. */ + flashcontent1 = chip_readb(bios); + flashcontent2 = chip_readb(bios + 0x01); + + if (id1 == flashcontent1) + printf_debug(", id1 is normal flash content"); + if (id2 == flashcontent2) + printf_debug(", id2 is normal flash content"); + + printf_debug("\n"); if (id1 != flash->manufacture_id || id2 != flash->model_id) return 0; -- http://www.hailfinger.org/

2 2

[commit] r971 - trunk
by repository service 23 Mar '10

23 Mar '10

Author: hailfinger Date: Tue Mar 23 00:47:38 2010 New Revision: 971 URL: http://flashrom.org/trac/coreboot/changeset/971 Log: JEDEC ID probing checks the parity of the vendor ID and verifies that the ID differs from the flash chip contents. Add the same feature to 82802AB ID probing. This should reduce the number of lines we have to look at to determine if we're missing a chip definition or if we need a board enable. Just use grep on the log: grep -v "parity violation" To narrow it down further, try: grep -v "id1 is normal flash content, id2 is normal flash content" And of course you want to ignore the skipped probes: grep -v "skipped" The remaining lines are worth examining, and if those look bogus as well, you can bet that we just need a board enable. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/82802ab.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Tue Mar 23 00:43:51 2010 (r970) +++ trunk/82802ab.c Tue Mar 23 00:47:38 2010 (r971) @@ -47,6 +47,7 @@ { chipaddr bios = flash->virtual_memory; uint8_t id1, id2; + uint8_t flashcontent1, flashcontent2; /* Reset to get a clean state */ chip_writeb(0xFF, bios); @@ -64,8 +65,21 @@ programmer_delay(10); - printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); + printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); + if (!oddparity(id1)) + printf_debug(", id1 parity violation"); + + /* Read the product ID location again. We should now see normal flash contents. */ + flashcontent1 = chip_readb(bios); + flashcontent2 = chip_readb(bios + 0x01); + + if (id1 == flashcontent1) + printf_debug(", id1 is normal flash content"); + if (id2 == flashcontent2) + printf_debug(", id2 is normal flash content"); + + printf_debug("\n"); if (id1 != flash->manufacture_id || id2 != flash->model_id) return 0;

1 0

[PATCH] Reduce message severity level for skipped chips
by Carl-Daniel Hailfinger 23 Mar '10

23 Mar '10

Old verbose log excerpt: Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. New verbose log excerpt: Probing for Atmel AT25DF021, 256 KB: skipped. This makes logs more readable and manageable. If someone really desperately wants all the bus debugging stuff, he/she can switch to SPEW mode instead of VERBOSE mode. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-skip_bus_nonverbose/flashrom.c =================================================================== --- flashrom-skip_bus_nonverbose/flashrom.c (Revision 969) +++ flashrom-skip_bus_nonverbose/flashrom.c (Arbeitskopie) @@ -877,20 +877,24 @@ for (flash = first_flash; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; - printf_debug("Probing for %s %s, %d KB: ", + msg_gdbg("Probing for %s %s, %d KB: ", flash->vendor, flash->name, flash->total_size); if (!flash->probe && !force) { - printf_debug("failed! flashrom has no probe function for this flash chip.\n"); + msg_gdbg("failed! flashrom has no probe function for " + "this flash chip.\n"); continue; } buses_common = buses_supported & flash->bustype; if (!buses_common) { tmp = flashbuses_to_text(buses_supported); - printf_debug("skipped. Host bus type %s ", tmp); + msg_gdbg("skipped."); + msg_gspew(" Host bus type %s ", tmp); free(tmp); tmp = flashbuses_to_text(flash->bustype); - printf_debug("and chip bus type %s are incompatible.\n", tmp); + msg_gspew("and chip bus type %s are incompatible.", + tmp); free(tmp); + msg_gdbg("\n"); continue; } -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

2 2

[commit] r970 - trunk
by repository service 23 Mar '10

23 Mar '10

Author: hailfinger Date: Tue Mar 23 00:43:51 2010 New Revision: 970 URL: http://flashrom.org/trac/coreboot/changeset/970 Log: Reduce message severity level for skipped chips. Old verbose log excerpt: Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. New verbose log excerpt: Probing for Atmel AT25DF021, 256 KB: skipped. This makes logs more readable and manageable. If someone really desperately wants all the bus debugging stuff, he/she can switch to SPEW mode instead of VERBOSE mode. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-By: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/flashrom.c Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Mon Mar 22 22:48:51 2010 (r969) +++ trunk/flashrom.c Tue Mar 23 00:43:51 2010 (r970) @@ -877,20 +877,24 @@ for (flash = first_flash; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; - printf_debug("Probing for %s %s, %d KB: ", + msg_gdbg("Probing for %s %s, %d KB: ", flash->vendor, flash->name, flash->total_size); if (!flash->probe && !force) { - printf_debug("failed! flashrom has no probe function for this flash chip.\n"); + msg_gdbg("failed! flashrom has no probe function for " + "this flash chip.\n"); continue; } buses_common = buses_supported & flash->bustype; if (!buses_common) { tmp = flashbuses_to_text(buses_supported); - printf_debug("skipped. Host bus type %s ", tmp); + msg_gdbg("skipped."); + msg_gspew(" Host bus type %s ", tmp); free(tmp); tmp = flashbuses_to_text(flash->bustype); - printf_debug("and chip bus type %s are incompatible.\n", tmp); + msg_gspew("and chip bus type %s are incompatible.", + tmp); free(tmp); + msg_gdbg("\n"); continue; }

1 0

[PATCH] fix a r943 missmerge, a duplicate printlock
by Sean Nelson 22 Mar '10

22 Mar '10

Clang complains loudly when there are duplicate printlock_sst_fwhub, gcc ignores them. Ack via IRC. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>

2 3

[commit] r969 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: snelson Date: Mon Mar 22 22:48:51 2010 New Revision: 969 URL: http://flashrom.org/trac/coreboot/changeset/969 Log: Clang complains loudly when there are duplicate printlock_sst_fwhub, gcc ignores them. Ack via IRC. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Mar 22 13:29:45 2010 (r968) +++ trunk/flashchips.c Mon Mar 22 22:48:51 2010 (r969) @@ -4096,7 +4096,6 @@ } }, .printlock = printlock_sst_fwhub, - .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, @@ -4128,7 +4127,6 @@ } }, .printlock = printlock_sst_fwhub, - .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, @@ -4163,7 +4161,6 @@ }, }, .printlock = printlock_sst_fwhub, - .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, @@ -4226,7 +4223,6 @@ } }, .printlock = printlock_sst_fwhub, - .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped,

1 0

[PATCH] More robust libpci detection
by Carl-Daniel Hailfinger 22 Mar '10

22 Mar '10

Idwer reported problems with the current libpci check on FreeBSD 8.0-RELEASE i386 This is caused by a strict linker. Parsing linker error messages is an exercise in futility, so I implemented fallback library detection with $CC --print-file-name. This fallback will fail on llvm-clang (llvm bug 5137), but such machines hopefully have a more permissive linker and will never hit that code path. The fallback will also fail on NetBSD where we should look for libpciutils instead, but that hopefully doesn't have a strict linker either. Side note: The configure checks in the Makefile are now so unwieldy that a separate configure script will definitely improve readability. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-libpci_robust_detection/Makefile =================================================================== --- flashrom-libpci_robust_detection/Makefile (Revision 916) +++ flashrom-libpci_robust_detection/Makefile (Arbeitskopie) @@ -251,21 +251,30 @@ echo "Please install libpci headers (package pciutils-devel)."; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1) - @printf "Checking for libpci... " + @printf "Checking for libpci (method 1)... " @$(shell ( echo "#include <pci/pci.h>"; \ echo "int main(int argc, char **argv)"; \ echo "{ return 0; }"; ) > .test1.c ) - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \ - echo "found." || ( echo "not found."; echo; \ - echo "Please install libpci (package pciutils)."; \ - echo "See README for more information."; echo; \ - rm -f .test1.c .test1; exit 1) + @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 $(LIBS) >/dev/null 2>&1 && \ + echo "found." || ( echo "not found."; \ + $(CC) --print-file-name=libpci.so >/dev/null 2>&1 && ( \ + printf "Checking for dynamic libpci (method 2)... "; \ + $(CC) --print-file-name=libpci.so 2>/dev/null | grep -q / && \ + echo "found." || ( echo "not found."; \ + printf "Checking for static libpci (method 2)... " \ + $(CC) --print-file-name=libpci.a 2>/dev/null | grep -q / && \ + echo "found." || ( echo "not found."; echo; \ + echo "Please install libpci (package pciutils)."; \ + echo "See README for more information."; echo; \ + rm -f .test1.c .test1; exit 1) ) ) || ( echo "unavailable."; echo; \ + echo "Please install libpci (package pciutils)."; \ + echo "See README for more information."; echo; )) @printf "Checking if libpci is sufficient... " @printf "" > .libdeps - @$(CC) $(LDFLAGS) .test.o -o .test -lpci $(LIBS) >/dev/null 2>&1 && \ + @$(CC) $(LDFLAGS) .test.o -o .test $(LIBS) >/dev/null 2>&1 && \ echo "yes." || ( echo "no."; \ printf "Checking if libz is present and supplies all needed symbols..."; \ - $(CC) $(LDFLAGS) .test.o -o .test -lpci -lz $(LIBS) >/dev/null 2>&1 && \ + $(CC) $(LDFLAGS) .test.o -o .test $(LIBS) -lz >/dev/null 2>&1 && \ ( echo "yes."; echo "NEEDLIBZ := yes" > .libdeps ) || ( echo "no."; echo; \ echo "Please install libz."; \ echo "See README for more information."; echo; \ -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

3 7

[commit] r968 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: hailfinger Date: Mon Mar 22 13:29:45 2010 New Revision: 968 URL: http://flashrom.org/trac/coreboot/changeset/968 Log: Idwer Vollering reported problems with the current libpci check on FreeBSD 8.0-RELEASE i386 This is caused by a strict linker. Parsing linker error messages is an exercise in futility, and library detection with $CC --print-file-name is totally useless for libraries outside the standard hardcoded builtin gcc search path (probably the same for other compilers as well). Look for libpciutils instead of libpci on NetBSD during the check. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Idwer Vollering <vidwer(a)gmail.com> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Mon Mar 22 08:03:26 2010 (r967) +++ trunk/Makefile Mon Mar 22 13:29:45 2010 (r968) @@ -279,26 +279,17 @@ echo "Please install libpci headers (package pciutils-devel)."; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1) - @printf "Checking for libpci... " - @$(shell ( echo "#include <pci/pci.h>"; \ - echo "int main(int argc, char **argv)"; \ - echo "{ return 0; }"; ) > .test1.c ) - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test1.c -o .test1 -lpci $(LIBS) >/dev/null 2>&1 && \ - echo "found." || ( echo "not found."; echo; \ - echo "Please install libpci (package pciutils)."; \ - echo "See README for more information."; echo; \ - rm -f .test1.c .test1; exit 1) - @printf "Checking if libpci is sufficient... " + @printf "Checking if libpci is present and sufficient... " @printf "" > .libdeps - @$(CC) $(LDFLAGS) .test.o -o .test -lpci $(LIBS) >/dev/null 2>&1 && \ + @$(CC) $(LDFLAGS) .test.o -o .test $(LIBS) >/dev/null 2>&1 && \ echo "yes." || ( echo "no."; \ - printf "Checking if libz is present and supplies all needed symbols..."; \ - $(CC) $(LDFLAGS) .test.o -o .test -lpci -lz $(LIBS) >/dev/null 2>&1 && \ + printf "Checking if libz+libpci are present and sufficient..."; \ + $(CC) $(LDFLAGS) .test.o -o .test $(LIBS) -lz >/dev/null 2>&1 && \ ( echo "yes."; echo "NEEDLIBZ := yes" > .libdeps ) || ( echo "no."; echo; \ - echo "Please install libz."; \ + echo "Please install libpci (package pciutils) and/or libz."; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test; exit 1) ) - @rm -f .test.c .test.o .test .test1.c .test1 + @rm -f .test.c .test.o .test else pciutils: compiler @printf "" > .libdeps

1 0

[commit] r967 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: snelson Date: Mon Mar 22 08:03:26 2010 New Revision: 967 URL: http://flashrom.org/trac/coreboot/changeset/967 Log: in unlock_28f004s5, variable 'i' needs to be int... Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/82802ab.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Mon Mar 22 07:57:02 2010 (r966) +++ trunk/82802ab.c Mon Mar 22 08:03:26 2010 (r967) @@ -209,7 +209,8 @@ int unlock_28f004s5(struct flashchip *flash) { chipaddr bios = flash->virtual_memory; - uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0, i; + uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; + int i; /* Clear status register */ chip_writeb(0x50, bios);

1 0

[PATCH] Intel 28F001BX fix
by Sean Nelson 22 Mar '10

22 Mar '10

see patch:

2 10

[commit] r966 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: snelson Date: Mon Mar 22 07:57:02 2010 New Revision: 966 URL: http://flashrom.org/trac/coreboot/changeset/966 Log: fix a few typos from the last commit. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/82802ab.c trunk/chipdrivers.h Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Mon Mar 22 05:39:31 2010 (r965) +++ trunk/82802ab.c Mon Mar 22 07:57:02 2010 (r966) @@ -206,10 +206,10 @@ return 0; } -int unlock_28f004s5(struct flashrom *flash) +int unlock_28f004s5(struct flashchip *flash) { chipaddr bios = flash->virtual_memory; - uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; + uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0, i; /* Clear status register */ chip_writeb(0x50, bios); Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Mon Mar 22 05:39:31 2010 (r965) +++ trunk/chipdrivers.h Mon Mar 22 07:57:02 2010 (r966) @@ -62,6 +62,7 @@ void print_status_82802ab(uint8_t status); void write_page_82802ab(chipaddr bios, uint8_t *src, chipaddr dst, int page_size); int unlock_82802ab(struct flashchip *flash); +int unlock_28f004s5(struct flashchip *flash); /* jedec.c */ uint8_t oddparity(uint8_t val);

1 0

[commit] r965 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: snelson Date: Mon Mar 22 05:39:31 2010 New Revision: 965 URL: http://flashrom.org/trac/coreboot/changeset/965 Log: To access/read the lock bits, we use the same mode to read the chip id. This patch looks into the write situation for the Intel 28F001BX-{B,T}. Looks like they're just a 82802ab page write. Unlock_28f004s5 has been changed to read all the lock bits and if at least one of the block lock bits are set, clear them all. If the master lock bit is set, we can't do anything about it, so we return. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger<c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/82802ab.c trunk/flashchips.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Mon Mar 22 04:30:58 2010 (r964) +++ trunk/82802ab.c Mon Mar 22 05:39:31 2010 (r965) @@ -205,3 +205,52 @@ return 0; } + +int unlock_28f004s5(struct flashrom *flash) +{ + chipaddr bios = flash->virtual_memory; + uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; + + /* Clear status register */ + chip_writeb(0x50, bios); + + /* Read identifier codes */ + chip_writeb(0x90, bios); + + /* Read master lock-bit */ + mcfg = chip_readb(bios + 0x3); + msg_cinfo("master lock is "); + if (mcfg) { + msg_cdbg("locked!\n"); + } else { + msg_cdbg("unlocked!\n"); + can_unlock = 1; + } + + /* Read block lock-bits */ + for (i = 0; i < flash->total_size * 1024; i+= (64 * 1024)) { + bcfg = chip_readb(bios + i + 2); // read block lock config + msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); + if (bcfg) { + need_unlock = 1; + } + } + + /* Reset chip */ + chip_writeb(0xFF, bios); + + /* Unlock: clear block lock-bits, if needed */ + if (can_unlock && need_unlock) { + chip_writeb(0x60, bios); + chip_writeb(0xD0, bios); + chip_writeb(0xFF, bios); + } + + /* Error: master locked or a block is locked */ + if (!can_unlock && need_unlock) { + msg_cerr("At least one block is locked and lockdown is active!\n"); + return -1; + } + + return 0; +} Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Mar 22 04:30:58 2010 (r964) +++ trunk/flashchips.c Mon Mar 22 05:39:31 2010 (r965) @@ -2316,7 +2316,7 @@ .model_id = P28F001BXB, .total_size = 128, .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ - .tested = TEST_BAD_WRITE, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -2330,7 +2330,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = NULL, + .write = write_82802ab, .read = read_memmapped, }, @@ -2342,7 +2342,7 @@ .model_id = P28F001BXT, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_BAD_WRITE, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -2356,7 +2356,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = NULL, + .write = write_82802ab, .read = read_memmapped, }, @@ -2368,7 +2368,6 @@ .model_id = E_28F004S5, .total_size = 512, .page_size = 256, - .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ @@ -2379,7 +2378,7 @@ .block_erase = erase_block_82802ab, }, }, - .unlock = unlock_82802ab, + .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, },

1 0

[PATCH] Multibyte SPI write for Bus Pirate
by Carl-Daniel Hailfinger 22 Mar '10

22 Mar '10

I found this in the Bus Pirate forum, apparently written by Patrick Georgi. Patrick, do you want to add a signoff? Index: flash.h =================================================================== --- flash.h (Revision 916) +++ flash.h (Arbeitskopie) @@ -502,6 +502,7 @@ int buspirate_spi_shutdown(void); int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); +int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf); /* dediprog.c */ int dediprog_init(void); Index: buspirate_spi.c =================================================================== --- buspirate_spi.c (Revision 916) +++ buspirate_spi.c (Arbeitskopie) @@ -316,4 +316,27 @@ return spi_read_chunked(flash, buf, start, len, 12); } -/* We could do 12-byte writes, but for now we use the generic 1-byte code. */ +int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf) +{ + int total_size = 1024 * flash->total_size; + int i; + + msg_pdbg("total_size is %d\n", total_size); + for (i = 0; i < total_size; i += 12) { + int l, r; + if (i + 12 <= total_size) + l = 12; + else + l = total_size - i; + + if ((r = spi_nbyte_program(i, &buf[i], l))) { + msg_perr("%s: write fail %d\n", __func__, r); + return 1; + } + + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + /* loop */; + } + + return 0; +} Index: spi.c =================================================================== --- spi.c (Revision 916) +++ spi.c (Arbeitskopie) @@ -108,7 +108,7 @@ .command = buspirate_spi_send_command, .multicommand = default_spi_send_multicommand, .read = buspirate_spi_read, - .write_256 = spi_chip_write_1, + .write_256 = buspirate_spi_write_256, }, #endif -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

2 3

[commit] r964 - trunk
by repository service 22 Mar '10

22 Mar '10

Author: hailfinger Date: Mon Mar 22 04:30:58 2010 New Revision: 964 URL: http://flashrom.org/trac/coreboot/changeset/964 Log: Multibyte SPI write for the Bus Pirate. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/buspirate_spi.c trunk/flash.h trunk/spi.c Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Sun Mar 21 15:54:57 2010 (r963) +++ trunk/buspirate_spi.c Mon Mar 22 04:30:58 2010 (r964) @@ -316,4 +316,39 @@ return spi_read_chunked(flash, buf, start, len, 12); } -/* We could do 12-byte writes, but for now we use the generic 1-byte code. */ +int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf) +{ + int total_size = 1024 * flash->total_size; + int i; + + spi_disable_blockprotect(); + /* Erase first. */ + msg_pinfo("Erasing flash before programming... "); + if (erase_flash(flash)) { + msg_perr("ERASE FAILED!\n"); + return -1; + } + msg_pinfo("done.\n"); + + /* FIXME: We could do 12 byte writes, but then we'd have to make sure + * not to cross a 256 byte page boundary. This problem only applies to + * writes, reads can cross page boundaries just fine. + */ + for (i = 0; i < total_size; i += 8) { + int l, r; + if (i + 8 <= total_size) + l = 8; + else + l = total_size - i; + + if ((r = spi_nbyte_program(i, &buf[i], l))) { + msg_perr("%s: write fail %d\n", __func__, r); + return 1; + } + + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + /* loop */; + } + + return 0; +} Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Mar 21 15:54:57 2010 (r963) +++ trunk/flash.h Mon Mar 22 04:30:58 2010 (r964) @@ -504,6 +504,7 @@ int buspirate_spi_shutdown(void); int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); +int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf); /* dediprog.c */ int dediprog_init(void); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Sun Mar 21 15:54:57 2010 (r963) +++ trunk/spi.c Mon Mar 22 04:30:58 2010 (r964) @@ -108,7 +108,7 @@ .command = buspirate_spi_send_command, .multicommand = default_spi_send_multicommand, .read = buspirate_spi_read, - .write_256 = spi_chip_write_1, + .write_256 = buspirate_spi_write_256, }, #endif

1 0

flash success + verified on DFI T3H6 mobo
by Mathew Hennessy 21 Mar '10

21 Mar '10

Hi, I just flashed BIOS on this host using the flashrom tool in ubuntu lucid repository.. Next time I have to flash the BIOS I'll be sure to add -V options.. But this combo apparently worked, except for the 2 spi_block_erase commands that failed. # flashrom -w JX58D210.BIN flashrom v0.9.1-r873 No coreboot table found. Found ITE SuperI/O, id 8718 Found chipset "Intel ICH10R", enabling flash write... OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... OK. Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0 spi_block_erase_52 failed during command execution at address 0x0 SUCCESS. done. COMPLETE. Verifying flash... VERIFIED.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom