- flashrom - mail.coreboot.org

GA-6BXE works with out a hitch
by Anders Jenbo 29 Apr '10

29 Apr '10

http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI… -Anders

1 0

[RFC] Kill --force
by Carl-Daniel Hailfinger 28 Apr '10

28 Apr '10

--force may have been a good idea back when only developers were using flashrom, but over the last few months I've seen too many people who incorrectly believed that --force would solve anything. One of the problems is that --force has multiple meanings: - Force chip read by faking probe success. - Force writing even if cbtable tells us that this is the wrong image for this board. - Force chip access even if the chip is bigger than max decode size for the flash bus. - Force erase even if erase is known bad. - Force write even if write is known bad. We should kill --force and replace it with explicit --force-erase or --force-cbtable-mismatch or similar stuff, maybe -p internal:ignore_cbtable. First step: - Remove any suggestions to use --force for probe/read from flashrom output. - Don't talk about "success" or "Found chip" if the chip is forced. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-forced_stupid/cli_classic.c =================================================================== --- flashrom-forced_stupid/cli_classic.c (Revision 992) +++ flashrom-forced_stupid/cli_classic.c (Arbeitskopie) @@ -303,6 +303,18 @@ cli_classic_usage(argv[0]); } + if (chip_to_probe) { + for (flash = flashchips; flash && flash->name; flash++) + if (!strcmp(flash->name, chip_to_probe)) + break; + if (!flash || !flash->name) { + fprintf(stderr, "Error: Unknown chip specified.\n"); + exit(1); + } + /* Clean up after the check. */ + flash = NULL; + } + if (programmer_init()) { fprintf(stderr, "Error: Programmer initialization failed.\n"); exit(1); @@ -329,14 +341,10 @@ } else if (!flashes[0]) { printf("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { - printf("If you know which flash chip you have, and if this version of flashrom\n"); - printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); - printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); - printf("\n"); - printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); + printf("Note: flashrom can never write if the flash chip isn't found automatically.\n"); } if (force && read_it && chip_to_probe) { - printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); + printf("Force read (-f -r -c) requested, pretending the chip is there:\n"); flashes[0] = probe_flash(flashchips, 1); if (!flashes[0]) { printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); Index: flashrom-forced_stupid/flashrom.c =================================================================== --- flashrom-forced_stupid/flashrom.c (Revision 992) +++ flashrom-forced_stupid/flashrom.c (Arbeitskopie) @@ -924,7 +924,8 @@ if (!flash || !flash->name) return NULL; - printf("Found chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", + printf("%s chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", + force ? "Assuming" : "Found", flash->vendor, flash->name, flash->total_size, flashbuses_to_text(flash->bustype), base); -- http://www.hailfinger.org/

3 10

[commit] r996 - trunk
by repository service 28 Apr '10

28 Apr '10

Author: hailfinger Date: Wed Apr 28 17:22:14 2010 New Revision: 996 URL: http://flashrom.org/trac/coreboot/changeset/996 Log: --force may have been a good idea back when only developers were using flashrom, but over the last few months we've seen too many people who incorrectly believed that --force would solve anything. One of the problems is that --force had multiple meanings: - Force chip read by faking probe success. - Force chip access even if the chip is bigger than max decode size for the flash bus. - Force erase even if erase is known bad. - Force write even if write is known bad. - Force writing even if cbtable tells us that this is the wrong image for this board. This patch cleans up --force usage: - Remove any suggestions to use --force for probe/read from flashrom output. - Don't talk about "success" or "Found chip" if the chip is forced. - Add a new internal programmer parameter boardmismatch=force. This overrides any mismatch detection from cbtable/image comparisons. - Add a new internal programmer parameter laptop=force_I_want_a_brick. - Adjust the documentation for --force. - Clean up the man page a bit whereever it talks about --force or laptops. Additional changes in this patch: - Add warnings about laptops to the documentation. - Abort if a laptop is detected. Can be overridden with the programmer parameter mentioned above. - Add "Portable" to the list of DMI strings indicating laptops. - Check if a chip specified with -c is known to flashrom. - Programmer parameter reliability and consistency fixes. - More paranoid self-checks. - Improve documentation. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/README trunk/cli_classic.c trunk/dmi.c trunk/flash.h trunk/flashrom.8 trunk/flashrom.c trunk/internal.c trunk/layout.c Modified: trunk/README ============================================================================== --- trunk/README Mon Apr 26 00:47:50 2010 (r995) +++ trunk/README Wed Apr 28 17:22:14 2010 (r996) @@ -11,6 +11,12 @@ It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. +Do not use flashrom on laptops! The embedded controller (EC) present in many +laptops interacts badly with any flash attempts and can brick your laptop +permanently. + +Please make a backup of your flash chip before writing to it. + Please see the flashrom(8) manpage. Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Mon Apr 26 00:47:50 2010 (r995) +++ trunk/cli_classic.c Wed Apr 28 17:22:14 2010 (r996) @@ -248,6 +248,10 @@ switch (optarg[namelen]) { case ':': programmer_param = strdup(optarg + namelen + 1); + if (!strlen(programmer_param)) { + free(programmer_param); + programmer_param = NULL; + } break; case '\0': break; @@ -303,6 +307,21 @@ cli_classic_usage(argv[0]); } + if (chip_to_probe) { + for (flash = flashchips; flash && flash->name; flash++) + if (!strcmp(flash->name, chip_to_probe)) + break; + if (!flash || !flash->name) { + fprintf(stderr, "Error: Unknown chip '%s' specified.\n", + chip_to_probe); + printf("Run flashrom -L to view the hardware supported " + "in this flashrom version.\n"); + exit(1); + } + /* Clean up after the check. */ + flash = NULL; + } + if (programmer_init()) { fprintf(stderr, "Error: Programmer initialization failed.\n"); exit(1); @@ -329,18 +348,14 @@ } else if (!flashes[0]) { printf("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { - printf("If you know which flash chip you have, and if this version of flashrom\n"); - printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); - printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); - printf("\n"); - printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); + printf("Note: flashrom can never write if the flash chip isn't found automatically.\n"); } if (force && read_it && chip_to_probe) { - printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); + printf("Force read (-f -r -c) requested, pretending the chip is there:\n"); flashes[0] = probe_flash(flashchips, 1); if (!flashes[0]) { - printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); - printf("Run flashrom -L to view the hardware supported in this flashrom version.\n"); + printf("Probing for flash chip '%s' failed.\n", chip_to_probe); + programmer_shutdown(); exit(1); } printf("Please note that forced reads most likely contain garbage.\n"); Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Mon Apr 26 00:47:50 2010 (r995) +++ trunk/dmi.c Wed Apr 28 17:22:14 2010 (r996) @@ -102,7 +102,8 @@ } chassis_type = get_dmi_string("chassis-type"); - if (chassis_type && !strcmp(chassis_type, "Notebook")) { + if (chassis_type && (!strcmp(chassis_type, "Notebook") || + !strcmp(chassis_type, "Portable"))) { printf_debug("Laptop detected via DMI\n"); is_laptop = 1; } Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon Apr 26 00:47:50 2010 (r995) +++ trunk/flash.h Wed Apr 28 17:22:14 2010 (r996) @@ -385,6 +385,7 @@ #if INTERNAL_SUPPORT == 1 extern int is_laptop; extern int force_boardenable; +extern int force_boardmismatch; void probe_superio(void); int internal_init(void); int internal_shutdown(void); Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Mon Apr 26 00:47:50 2010 (r995) +++ trunk/flashrom.8 Wed Apr 28 17:22:14 2010 (r996) @@ -61,7 +61,10 @@ More verbose output. .TP .B "\-c, \-\-chip" <chipname> -Probe only for specified flash ROM chip. +Probe only for specified flash ROM chip. This option takes the chip name as +printed by +.B "flashrom \-L" +without the vendor name. Please note that the chip name is case sensitive. .TP .B "\-m, \-\-mainboard" <[vendor:]part> Override mainboard settings. @@ -77,11 +80,16 @@ coreboot table is found. .TP .B "\-f, \-\-force" -Force write without checking whether the ROM image file is really meant -to be used on this board. +Force one or more of the following actions: .sp -Note: This check only works while coreboot is running, and only for those -boards where the coreboot code supports it. +* Force chip read and pretend the chip is there. +.sp +* Force chip access even if the chip is bigger than max decode size for\ + the flash bus. +.sp +* Force erase even if erase is known bad. +.sp +* Force write even if write is known bad. .TP .B "\-l, \-\-layout <file>" Read ROM layout from @@ -135,7 +143,7 @@ but outputs the supported hardware in MediaWiki syntax, so that it can be easily pasted into the wiki page at http://www.flashrom.org/. .TP -.B "\-p, \-\-programmer <name>[:parameters]" +.B "\-p, \-\-programmer <name>[:parameter[,parameter[,parameter]]]" Specify the programmer device. Currently supported are: .sp .BR "* internal" " (default, for in-system flashing in the mainboard)" @@ -220,6 +228,13 @@ enable is going to fail. In any case (success or failure), please report to the flashrom mailing list, see below. .sp +On systems running coreboot, flashrom checks whether the desired image matches +your mainboard. This needs some special board ID to be present in the image. +If flashrom detects that the image you want to write and the current board +do not match, it will refuse to write the image unless you specify +.sp +.B "flashrom -p internal:boardmismatch=force" +.sp If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus translation, flashrom should autodetect that configuration. You can use .B "flashrom -p internal:it87spiport=portnum" @@ -228,6 +243,24 @@ programmer section to use a non-default port for controlling the IT87 series Super I/O. In the unlikely case flashrom doesn't detect an active IT87 LPC<->SPI bridge, you can try to force recognition by using the it87spi programmer. +.sp +Using flashrom on laptops is dangerous and may easily make your hardware +unusable (see also the BUGS section). The embedded controller (EC) in these +machines often interacts badly with flashing. http://www.flashrom.org/Laptops +has more information. If flash is shared with the EC, erase is guaranteed to +brick your laptop and write is very likely to brick your laptop. +Chip read and probe may irritate your EC and cause fan failure, backlight +failure, sudden poweroff, and other nasty effects. +flashrom will attempt to detect laptops and abort immediately for safety +reasons. +If you want to proceed anyway at your own risk, use +.sp +.B "flashrom -p internal:laptop=force_I_want_a_brick" +.sp +You have been warned. +.sp +We will not help you if you force flashing on a laptop because this is a really +dumb idea. .TP .BR "dummy " programmer An optional parameter specifies the bus types it @@ -315,8 +348,14 @@ .SH BUGS Please report any bugs at .BR http://www.flashrom.org/trac/flashrom/newticket "," -or on the flashrom mailing list -.RB "(" http://www.flashrom.org/mailman/listinfo/flashrom ")." +or on the flashrom mailing list at +.BR http://www.flashrom.org/mailman/listinfo/flashrom "." +.sp +Using flashrom on laptops is dangerous and may easily make your hardware +unusable unless you can desolder the flash chip and have a full flash chip +backup. This is caused by the embedded controller (EC) present in many laptops, +which interacts badly with any flash attempts. This is a hardware limitation +and flashrom will attempt to detect it and abort immediately for safety reasons. .SH LICENCE .B flashrom is covered by the GNU General Public License (GPL), version 2. Some files are Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Mon Apr 26 00:47:50 2010 (r995) +++ trunk/flashrom.c Wed Apr 28 17:22:14 2010 (r996) @@ -488,7 +488,17 @@ char *param_pos, *rest, *tmp; char *dev = NULL; int devlen; + int needlelen; + needlelen = strlen(needle); + if (!needlelen) { + msg_gerr("%s: empty needle! Please report a bug at " + "flashrom(a)flashrom.org\n", __func__); + return NULL; + } + /* No programmer parameters given. */ + if (*haystack == NULL) + return NULL; param_pos = strstr(*haystack, needle); do { if (!param_pos) @@ -924,7 +934,8 @@ if (!flash || !flash->name) return NULL; - printf("Found chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", + printf("%s chip \"%s %s\" (%d KB, %s) at physical address 0x%lx.\n", + force ? "Assuming" : "Found", flash->vendor, flash->name, flash->total_size, flashbuses_to_text(flash->bustype), base); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Mon Apr 26 00:47:50 2010 (r995) +++ trunk/internal.c Wed Apr 28 17:22:14 2010 (r996) @@ -101,6 +101,7 @@ #if INTERNAL_SUPPORT == 1 struct superio superio = {}; int force_boardenable = 0; +int force_boardmismatch = 0; void probe_superio(void) { @@ -117,26 +118,42 @@ int internal_init(void) { int ret = 0; + int force_laptop = 0; + char *arg; - if (programmer_param && !strlen(programmer_param)) { - free(programmer_param); - programmer_param = NULL; + arg = extract_param(&programmer_param, "boardenable=", ",:"); + if (arg && !strcmp(arg,"force")) { + force_boardenable = 1; + } else if (arg && !strlen(arg)) { + msg_perr("Missing argument for boardenable.\n"); + } else if (arg) { + msg_perr("Unknown argument for boardenable: %s\n", arg); + exit(1); } - if (programmer_param) { - char *arg; - arg = extract_param(&programmer_param, "boardenable=", ",:"); - if (arg && !strcmp(arg,"force")) - force_boardenable = 1; - else if (arg) - msg_perr("Unknown argument for boardenable: %s\n", arg); - free(arg); - - if (strlen(programmer_param)) - msg_perr("Unhandled programmer parameters: %s\n", - programmer_param); - free(programmer_param); - programmer_param = NULL; + free(arg); + + arg = extract_param(&programmer_param, "boardmismatch=", ",:"); + if (arg && !strcmp(arg,"force")) { + force_boardmismatch = 1; + } else if (arg && !strlen(arg)) { + msg_perr("Missing argument for boardmismatch.\n"); + } else if (arg) { + msg_perr("Unknown argument for boardmismatch: %s\n", arg); + exit(1); + } + free(arg); + + arg = extract_param(&programmer_param, "laptop=", ",:"); + if (arg && !strcmp(arg,"force_I_want_a_brick")) { + force_laptop = 1; + } else if (arg && !strlen(arg)) { + msg_perr("Missing argument for laptop.\n"); + } else if (arg) { + msg_perr("Unknown argument for laptop: %s\n", arg); + exit(1); } + free(arg); + get_io_perms(); /* Initialize PCI access for flash enables */ @@ -155,22 +172,35 @@ probe_superio(); /* Warn if a laptop is detected. */ - if (is_laptop) - printf("========================================================================\n" - "WARNING! You seem to be running flashrom on a laptop.\n" - "Laptops, notebooks and netbooks are difficult to support and we recommend\n" - "to use the vendor flashing utility. The embedded controller (EC) in these\n" - "machines often interacts badly with flashing.\n" - "See http://www.flashrom.org/Laptops for details.\n" - "========================================================================\n"); + if (is_laptop) { + msg_perr("========================================================================\n" + "WARNING! You seem to be running flashrom on a laptop.\n" + "Laptops, notebooks and netbooks are difficult to support and we recommend\n" + "to use the vendor flashing utility. The embedded controller (EC) in these\n" + "machines often interacts badly with flashing.\n" + "See http://www.flashrom.org/Laptops for details.\n\n" + "If flash is shared with the EC, erase is guaranteed to brick your laptop\n" + "and write may brick your laptop.\n" + "Read and probe may irritate your EC and cause fan failure, backlight\n" + "failure and sudden poweroff.\n" + "You have been warned.\n" + "========================================================================\n"); + if (force_laptop) { + msg_perr("Proceeding anyway because user specified " + "laptop=force_I_want_a_brick\n"); + } else { + msg_perr("Aborting.\n"); + exit(1); + } + } /* try to enable it. Failure IS an option, since not all motherboards * really need this to be done, etc., etc. */ ret = chipset_flash_enable(); if (ret == -2) { - printf("WARNING: No chipset found. Flash detection " - "will most likely fail.\n"); + msg_perr("WARNING: No chipset found. Flash detection " + "will most likely fail.\n"); } /* Probe for IT87* LPC->SPI translation unconditionally. */ @@ -182,7 +212,7 @@ * The error code might have been a warning only. * Besides that, we don't check the board enable return code either. */ - return 0; + return 0; } int internal_shutdown(void) Modified: trunk/layout.c ============================================================================== --- trunk/layout.c Mon Apr 26 00:47:50 2010 (r995) +++ trunk/layout.c Wed Apr 28 17:22:14 2010 (r996) @@ -111,14 +111,15 @@ !strcasecmp(mainboard_part, lb_part)) { printf_debug("This firmware image matches this mainboard.\n"); } else { - if (force) { + if (force_boardmismatch) { printf("WARNING: This firmware image does not " "seem to fit to this machine - forcing it.\n"); } else { printf("ERROR: Your firmware image (%s:%s) does not " "appear to\n be correct for the detected " - "mainboard (%s:%s)\n\nOverride with --force if you " - "are absolutely sure that you\nare using a correct " + "mainboard (%s:%s)\n\nOverride with -p internal:" + "boardmismatch=force if you are absolutely sure " + "that\nyou are using a correct " "image for this mainboard or override\nthe detected " "values with --mainboard <vendor>:<mainboard>.\n\n", mainboard_vendor, mainboard_part, lb_vendor,

1 0

[feature-request] skip the unwanted sections in ROM layout
by Water Chen 27 Apr '10

27 Apr '10

Hi flashrom designers, >From the handle_romentries() function, I know the current design for "--layout" and "--image" is to read the unwanted sections from the flashchip to a buffer and then write the whole buffer back to the flashchip. For some reasons, I don't want to touch the unwanted sections in the flashchip. Can flashrom just skip them? My platform is "Intel ICH10R" and "Atmel AT25DF321". Thank you. Water

2 2

board enable for Sun Fire v40z
by Mark Morschhäuser 27 Apr '10

27 Apr '10

Hi, as we found out in IRC yesterday, flashrom needs boardenable code to function for the Sun Fire v40z mainboard. I attached the output of # flashrom -V &> flashrom.txt # superiotool -deV &> superiotool.txt # lspci -nnvvvxxx &> lspci.tx flashrom and superiotool were checked out from svn. The official Bios download is a bit tricky as you need a Sun Premium account to access it :-/ Anyway, here is the link: http://www.sun.com/servers/entry/v40z/downloads.jsp If you don't have such an account and need the Bios, send me a note. Documentation however is freely available under [1] (the "Sun Fire v40z Server Architectural Whitepaper" may be of interest) and [2] (see "Full Components List" and "Related Documentation"). If you need more information or help, just ask me. Greetings, Mark [1] http://www.sun.com/servers/entry/v40z/specs.xml [2] http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/SunFire…

1 0

MCP SPI Gigabyte GA-M56S-S3 (MCP65)
by Mark Morschhäuser 27 Apr '10

27 Apr '10

Hello, I am using a Gigabyte GA-M56S-S3 mainboard, read your random notes about MCP SPI support and want to help you with flashrom/lspci/superiotool output I made (with recend svn versions). I attached the output of # flashrom -V &> flashrom.txt # superiotool -deV &> superiotool.txt # lspci -nnvvvxxx &> lspci.txt Link to official BIOS Download: http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=2563&v… Greetings, Mark

1 0

[commit] r995 - trunk
by repository service 26 Apr '10

26 Apr '10

Author: ruik Date: Mon Apr 26 00:47:50 2010 New Revision: 995 URL: http://flashrom.org/trac/coreboot/changeset/995 Log: Fix the DOS port. Now the DS selector limit is set to 4GB and all mmio accesses goes through DS, the 1:1 mapping is fixed so the _DS base is taken onto account. Plus is that the hwaccess.c needs no change and memcpy etc can be used on mmaped space. Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/Makefile trunk/hwaccess.c trunk/physmap.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Tue Apr 20 21:34:31 2010 (r994) +++ trunk/Makefile Mon Apr 26 00:47:50 2010 (r995) @@ -202,12 +202,8 @@ endif ifeq ($(NEED_PCI), yes) -ifneq ($(OS_ARCH), DOS) -# FIXME This workaround is needed until libpci detection can handle -# cross-compiling for DOS. CHECK_LIBPCI = yes endif -endif ifeq ($(NEED_PCI), yes) FEATURE_CFLAGS += -D'NEED_PCI=1' Modified: trunk/hwaccess.c ============================================================================== --- trunk/hwaccess.c Tue Apr 20 21:34:31 2010 (r994) +++ trunk/hwaccess.c Mon Apr 26 00:47:50 2010 (r995) @@ -54,44 +54,6 @@ #endif } -#ifdef __DJGPP__ - -extern unsigned short segFS; - -#include <sys/farptr.h> - -void mmio_writeb(uint8_t val, void *addr) -{ - _farpokeb(segFS, (unsigned long) addr, val); -} - -void mmio_writew(uint16_t val, void *addr) -{ - _farpokew(segFS, (unsigned long) addr, val); -} - -void mmio_writel(uint32_t val, void *addr) -{ - _farpokel(segFS, (unsigned long) addr, val); -} - -uint8_t mmio_readb(void *addr) -{ - return _farpeekb(segFS, (unsigned long) addr); -} - -uint16_t mmio_readw(void *addr) -{ - return _farpeekw(segFS, (unsigned long) addr); -} - -uint32_t mmio_readl(void *addr) -{ - return _farpeekl(segFS, (unsigned long) addr); -} - -#else - void mmio_writeb(uint8_t val, void *addr) { *(volatile uint8_t *) addr = val; @@ -121,4 +83,3 @@ { return *(volatile uint32_t *) addr; } -#endif Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Tue Apr 20 21:34:31 2010 (r994) +++ trunk/physmap.c Mon Apr 26 00:47:50 2010 (r995) @@ -30,66 +30,67 @@ #ifdef __DJGPP__ #include <dpmi.h> +#include <sys/nearptr.h> #define MEM_DEV "dpmi" -unsigned short segFS = 0; +static void *realmem_map; -void *sys_physmap(unsigned long phys_addr, size_t len) +static void *map_first_meg(unsigned long phys_addr, size_t len) { - int ret; - __dpmi_meminfo mi; - if (segFS == 0) { - segFS = __dpmi_allocate_ldt_descriptors (1); - __dpmi_set_segment_base_address (segFS, 0x0); - __dpmi_set_segment_limit (segFS, 0xffffffff); + if (realmem_map) { + return realmem_map + phys_addr; } - mi.address = phys_addr; - mi.size = len; - ret = __dpmi_physical_address_mapping (&mi); + realmem_map = valloc(1024 * 1024); - if (ret != 0) { + if (!realmem_map) { return NULL; } - return (void *) mi.address; -} - -#define sys_physmap_rw_uncached sys_physmap - -#include <sys/movedata.h> -#include <sys/segments.h> -#include <go32.h> + if (__djgpp_map_physical_memory(realmem_map, (1024 * 1024), 0)) { + return NULL; + } -static void *realmem_cpy; + return realmem_map + phys_addr; +} -void *sys_physmap_ro_cached(unsigned long phys_addr, size_t len) +void *sys_physmap(unsigned long phys_addr, size_t len) { - /* no support for not a 1MB of mem */ - if ((phys_addr + len) > 1024*1024) + int ret; + __dpmi_meminfo mi; + + /* enable 4GB limit on DS descriptor */ + if (!__djgpp_nearptr_enable()) { return NULL; + } - if (realmem_cpy) - return realmem_cpy + phys_addr; + if ((phys_addr + len - 1) < (1024 * 1024)) { + /* we need to use another method to map first 1MB */ + return map_first_meg(phys_addr, len); + } - realmem_cpy = valloc(1024*1024); + mi.address = phys_addr; + mi.size = len; + ret = __dpmi_physical_address_mapping (&mi); - if (!realmem_cpy) + if (ret != 0) { return NULL; + } - movedata(_dos_ds, 0, _my_ds(), (unsigned long) realmem_cpy, 1024*1024); - return realmem_cpy + phys_addr; + return (void *) mi.address + __djgpp_conventional_base; } +#define sys_physmap_rw_uncached sys_physmap +#define sys_physmap_ro_cached sys_physmap void physunmap(void *virt_addr, size_t len) { __dpmi_meminfo mi; - /* we ignore unmaps for our cheat 1MB copy */ - if ((virt_addr >= realmem_cpy) && ((virt_addr + len) <= (realmem_cpy + 1024*1024))) { + /* we ignore unmaps for our first 1MB */ + if ((virt_addr >= realmem_map) && ((virt_addr + len) <= (realmem_map + (1024 * 1024)))) { return; }

1 0

help - flash chip unknown state - attached output files
by csh tmp 24 Apr '10

24 Apr '10

Hello, First, I want to thank Flashrom developers and maintainers and all the helpers who help make this wonderful utility. Please help urgent problem - flashrom erase failed, flash chip in unknown state now. PLEASE help - what do I do now ? THANK YOU. Attached diagnostic output plain-text files. Thanks again. My system: HP Pavilion a445w, P4SD-LA Motherboard (Stingray), XUbuntu 9.10 Karmic uname -a gives Linux 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux Extracted Windows exe "sp26381.exe" from HP software and downloads site at ftp://ftp.hp.com/pub/softpaq/sp26001-26500/sp26381.exe - it contains "328.rom" (524288 bytes) - new BIOS version 3.28 Current existing BIOS version 3.19 Using flashrom v0.9.1-r706, I first earlier saved current BIOS image to "current_bios_amibios3.19.img" (524288 bytes) - got the following output: flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Reading flash... done. I stupidly made a typo in testing by first trying to re-write current bios back to the chip, to test. I typed the following cmd (missed giving the '-' char to -v option) $ sudo flashrom -w current_bios_amibios3.19.img v current_bios_amibios3.19.img flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x000061f0! Expected=0xff, Read=0x3c, failed byte count from 0x00000000-0x0007ffff: 0x6a379 ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF!

4 4

NVIDIA MCP65 ("flashrom -V" for unsupported chipset)
by Melchior FRANZ 24 Apr '10

24 Apr '10

> Please send the output of "flashrom -V" to flashrom(a)flashrom.org to > help us finish support for your chipset. Thanks. OK. :-) m.

1 0

please help - urgent - flash chip in unknown state
by csh tmp 24 Apr '10

24 Apr '10

Hello, First, I want to thank Flashrom developers and maintainers and all the helpers who help make this wonderful utility. Please help urgent problem - flashrom erase failed, flash chip in unknown state now. PLEASE help - what do I do now ? THANK YOU. My system: HP Pavilion a445w, XUbuntu 9.10 Karmic, uname -a gives Linux 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux Using flashrom v0.9.1-r706, I first earlier saved current BIOS image to "current_bios_amibios3.19.img" flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Reading flash... done. I stupidly made a typo in testing by first trying to re-write current bios back to the chip, I typed the following cmd (missed giving the '-' char to -v option) $ sudo flashrom -w current_bios_amibios3.19.img v current_bios_amibios3.19.img flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x000061f0! Expected=0xff, Read=0x3c, failed byte count from 0x00000000-0x0007ffff: 0x6a379 ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF!

1 0

DOS flashrom - partial success on Dell Optiplex 320
by rayer 24 Apr '10

24 Apr '10

Hi, I tried the latest build and didn't get a crash - well mmap() emulation seems to be finally working ;) but when I tried to dump flash with -V -r it hanged after probing chip: AE49F2008, skipped I wait a minute but it didn't probed other chips, so I pressed CTRL+C... It also seems to have some problems with delay loop calibration. Maybe you can use DJGPP functions udelay() and uclock() with ~1us granularity. So I opened the case and lookoed for the flash chip - PMC Pm49FL004T and passed - c Pm49FL004 option. Then the chip was probed OK and flash content dumped, well done. http://rayer.ic.cz/350d/flashrom.jpg Here's the dumped BIOS image http://rayer.ic.cz/350d/dell320.bin Martin

3 3

[PATCH] Add Winbond W25Qxx
by Rudolf Marek 22 Apr '10

22 Apr '10

Hello, Using a DOS version of flashrom, I added following Winbond chips: W25Q80, W25Q16 and W25Q32. I tested read/write/probe with W25Q80. Dont know how should I test all erase opcodes? Attaching patch and some info, currently marking all untested. Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> http://www.winbond-usa.com/products/Nexflash/pdfs/datasheets/W25Q80_16_32c.… Rudolf flashrom v0.9.1-r990 on FreeDOS 7 (i786), built with libpci 3.1.5, GCC 4.3.2 No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 795M loops per second, delay more than 100o short, recalculating... 906M loops per second, delay more than 100o short, recalculating... 901M loops per second, delay more than 100o short, recalculating... 892M loops per second, delay more than 100o short, recalculating... 912M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Chip status register is 00 Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rems: id1 0xef, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, 0x080000-0x080fff, 0x081000-0x081fff, 0x082000-0x082fff, 0x083000-0x083fff, 0x084000-0x084fff, 0x085000-0x085fff, 0x086000-0x086fff, 0x087000-0x087fff, 0x088000-0x088fff, 0x089000-0x089fff, 0x08a000-0x08afff, 0x08b000-0x08bfff, 0x08c000-0x08cfff, 0x08d000-0x08dfff, 0x08e000-0x08efff, 0x08f000-0x08ffff, 0x090000-0x090fff, 0x091000-0x091fff, 0x092000-0x092fff, 0x093000-0x093fff, 0x094000-0x094fff, 0x095000-0x095fff, 0x096000-0x096fff, 0x097000-0x097fff, 0x098000-0x098fff, 0x099000-0x099fff, 0x09a000-0x09afff, 0x09b000-0x09bfff, 0x09c000-0x09cfff, 0x09d000-0x09dfff, 0x09e000-0x09efff, 0x09f000-0x09ffff, 0x0a0000-0x0a0fff, 0x0a1000-0x0a1fff, 0x0a2000-0x0a2fff, 0x0a3000-0x0a3fff, 0x0a4000-0x0a4fff, 0x0a5000-0x0a5fff, 0x0a6000-0x0a6fff, 0x0a7000-0x0a7fff, 0x0a8000-0x0a8fff, 0x0a9000-0x0a9fff, 0x0aa000-0x0aafff, 0x0ab000-0x0abfff, 0x0ac000-0x0acfff, 0x0ad000-0x0adfff, 0x0ae000-0x0aefff, 0x0af000-0x0affff, 0x0b0000-0x0b0fff, 0x0b1000-0x0b1fff, 0x0b2000-0x0b2fff, 0x0b3000-0x0b3fff, 0x0b4000-0x0b4fff, 0x0b5000-0x0b5fff, 0x0b6000-0x0b6fff, 0x0b7000-0x0b7fff, 0x0b8000-0x0b8fff, 0x0b9000-0x0b9fff, 0x0ba000-0x0bafff, 0x0bb000-0x0bbfff, 0x0bc000-0x0bcfff, 0x0bd000-0x0bdfff, 0x0be000-0x0befff, 0x0bf000-0x0bffff, 0x0c0000-0x0c0fff, 0x0c1000-0x0c1fff, 0x0c2000-0x0c2fff, 0x0c3000-0x0c3fff, 0x0c4000-0x0c4fff, 0x0c5000-0x0c5fff, 0x0c6000-0x0c6fff, 0x0c7000-0x0c7fff, 0x0c8000-0x0c8fff, 0x0c9000-0x0c9fff, 0x0ca000-0x0cafff, 0x0cb000-0x0cbfff, 0x0cc000-0x0ccfff, 0x0cd000-0x0cdfff, 0x0ce000-0x0cefff, 0x0cf000-0x0cffff, 0x0d0000-0x0d0fff, 0x0d1000-0x0d1fff, 0x0d2000-0x0d2fff, 0x0d3000-0x0d3fff, 0x0d4000-0x0d4fff, 0x0d5000-0x0d5fff, 0x0d6000-0x0d6fff, 0x0d7000-0x0d7fff, 0x0d8000-0x0d8fff, 0x0d9000-0x0d9fff, 0x0da000-0x0dafff, 0x0db000-0x0dbfff, 0x0dc000-0x0dcfff, 0x0dd000-0x0ddfff, 0x0de000-0x0defff, 0x0df000-0x0dffff, 0x0e0000-0x0e0fff, 0x0e1000-0x0e1fff, 0x0e2000-0x0e2fff, 0x0e3000-0x0e3fff, 0x0e4000-0x0e4fff, 0x0e5000-0x0e5fff, 0x0e6000-0x0e6fff, 0x0e7000-0x0e7fff, 0x0e8000-0x0e8fff, 0x0e9000-0x0e9fff, 0x0ea000-0x0eafff, 0x0eb000-0x0ebfff, 0x0ec000-0x0ecfff, 0x0ed000-0x0edfff, 0x0ee000-0x0eefff, 0x0ef000-0x0effff, 0x0f0000-0x0f0fff, 0x0f1000-0x0f1fff, 0x0f2000-0x0f2fff, 0x0f3000-0x0f3fff, 0x0f4000-0x0f4fff, 0x0f5000-0x0f5fff, 0x0f6000-0x0f6fff, 0x0f7000-0x0f7fff, 0x0f8000-0x0f8fff, 0x0f9000-0x0f9fff, 0x0fa000-0x0fafff, 0x0fb000-0x0fbfff, 0x0fc000-0x0fcfff, 0x0fd000-0x0fdfff, 0x0fe000-0x0fefff, 0x0ff000-0x0fffff, SUCCESS. flashrom v0.9.1-r990 on FreeDOS 7 (i786), built with libpci 3.1.5, GCC 4.3.2 No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 937M loops per second, delay more than 100o short, recalculating... 878M loops per second, delay more than 100o short, recalculating... 904M loops per second, delay more than 100o short, recalculating... 910M loops per second, delay more than 100o short, recalculating... 903M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x58, id2 0x56, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Chip status register is 00 Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x08, id2 0x31, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rems: id1 0xef, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. flashrom v0.9.1-r990 on FreeDOS 7 (i786), built with libpci 3.1.5, GCC 4.3.2 No coreboot table found. DMI string system-manufacturer: "" DMI string system-product-name: "" DMI string system-version: "" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "" Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 795M loops per second, delay more than 100o short, recalculating... 906M loops per second, delay more than 100o short, recalculating... 901M loops per second, delay more than 100o short, recalculating... 892M loops per second, delay more than 100o short, recalculating... 912M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Chip status register is 00 Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. probe_spi_rems: id1 0xef, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, 0x080000-0x080fff, 0x081000-0x081fff, 0x082000-0x082fff, 0x083000-0x083fff, 0x084000-0x084fff, 0x085000-0x085fff, 0x086000-0x086fff, 0x087000-0x087fff, 0x088000-0x088fff, 0x089000-0x089fff, 0x08a000-0x08afff, 0x08b000-0x08bfff, 0x08c000-0x08cfff, 0x08d000-0x08dfff, 0x08e000-0x08efff, 0x08f000-0x08ffff, 0x090000-0x090fff, 0x091000-0x091fff, 0x092000-0x092fff, 0x093000-0x093fff, 0x094000-0x094fff, 0x095000-0x095fff, 0x096000-0x096fff, 0x097000-0x097fff, 0x098000-0x098fff, 0x099000-0x099fff, 0x09a000-0x09afff, 0x09b000-0x09bfff, 0x09c000-0x09cfff, 0x09d000-0x09dfff, 0x09e000-0x09efff, 0x09f000-0x09ffff, 0x0a0000-0x0a0fff, 0x0a1000-0x0a1fff, 0x0a2000-0x0a2fff, 0x0a3000-0x0a3fff, 0x0a4000-0x0a4fff, 0x0a5000-0x0a5fff, 0x0a6000-0x0a6fff, 0x0a7000-0x0a7fff, 0x0a8000-0x0a8fff, 0x0a9000-0x0a9fff, 0x0aa000-0x0aafff, 0x0ab000-0x0abfff, 0x0ac000-0x0acfff, 0x0ad000-0x0adfff, 0x0ae000-0x0aefff, 0x0af000-0x0affff, 0x0b0000-0x0b0fff, 0x0b1000-0x0b1fff, 0x0b2000-0x0b2fff, 0x0b3000-0x0b3fff, 0x0b4000-0x0b4fff, 0x0b5000-0x0b5fff, 0x0b6000-0x0b6fff, 0x0b7000-0x0b7fff, 0x0b8000-0x0b8fff, 0x0b9000-0x0b9fff, 0x0ba000-0x0bafff, 0x0bb000-0x0bbfff, 0x0bc000-0x0bcfff, 0x0bd000-0x0bdfff, 0x0be000-0x0befff, 0x0bf000-0x0bffff, 0x0c0000-0x0c0fff, 0x0c1000-0x0c1fff, 0x0c2000-0x0c2fff, 0x0c3000-0x0c3fff, 0x0c4000-0x0c4fff, 0x0c5000-0x0c5fff, 0x0c6000-0x0c6fff, 0x0c7000-0x0c7fff, 0x0c8000-0x0c8fff, 0x0c9000-0x0c9fff, 0x0ca000-0x0cafff, 0x0cb000-0x0cbfff, 0x0cc000-0x0ccfff, 0x0cd000-0x0cdfff, 0x0ce000-0x0cefff, 0x0cf000-0x0cffff, 0x0d0000-0x0d0fff, 0x0d1000-0x0d1fff, 0x0d2000-0x0d2fff, 0x0d3000-0x0d3fff, 0x0d4000-0x0d4fff, 0x0d5000-0x0d5fff, 0x0d6000-0x0d6fff, 0x0d7000-0x0d7fff, 0x0d8000-0x0d8fff, 0x0d9000-0x0d9fff, 0x0da000-0x0dafff, 0x0db000-0x0dbfff, 0x0dc000-0x0dcfff, 0x0dd000-0x0ddfff, 0x0de000-0x0defff, 0x0df000-0x0dffff, 0x0e0000-0x0e0fff, 0x0e1000-0x0e1fff, 0x0e2000-0x0e2fff, 0x0e3000-0x0e3fff, 0x0e4000-0x0e4fff, 0x0e5000-0x0e5fff, 0x0e6000-0x0e6fff, 0x0e7000-0x0e7fff, 0x0e8000-0x0e8fff, 0x0e9000-0x0e9fff, 0x0ea000-0x0eafff, 0x0eb000-0x0ebfff, 0x0ec000-0x0ecfff, 0x0ed000-0x0edfff, 0x0ee000-0x0eefff, 0x0ef000-0x0effff, 0x0f0000-0x0f0fff, 0x0f1000-0x0f1fff, 0x0f2000-0x0f2fff, 0x0f3000-0x0f3fff, 0x0f4000-0x0f4fff, 0x0f5000-0x0f5fff, 0x0f6000-0x0f6fff, 0x0f7000-0x0f7fff, 0x0f8000-0x0f8fff, 0x0f9000-0x0f9fff, 0x0fa000-0x0fafff, 0x0fb000-0x0fbfff, 0x0fc000-0x0fcfff, 0x0fd000-0x0fdfff, 0x0fe000-0x0fefff, 0x0ff000-0x0fffff, SUCCESS. done. Programming flash done. COMPLETE. Verifying flash... VERIFIED.

3 7

Warning and failure messages from flashrom
by Alan Mast 22 Apr '10

22 Apr '10

Received the following WARNING and FAILED messages: [root@rhlab2 ~]# flashrom flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel ICH9DO", enabling flash write... WARNING: SPI Configuration Lockdown activated. FAILED! This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "Atmel AT25DF321" (4096 KB, SPI) at physical address 0xffc00000. No operations were specified. How do I turn off the "Configuration Lockdown"? Thanks, Alan This document may contain unclassified technical data whose export, transfer and/or disclosure is restricted by United States law. Dissemination to non-US persons, whether in the United States or abroad may require an export license or other authorization. The information contained herein, including any attached documents or files, is confidential, may be legally privileged and is solely for the intended recipient(s). If you received this information in error, please destroy it and notify us immediately by reply e-mail, letter, fax or phone. Any unauthorized use, dissemination, disclosure, copying or printing is strictly prohibited.

1 0

How to identify a BIOS file
by 890gx＠hushmail.com 22 Apr '10

22 Apr '10

I downloaded the following BIOS update for the MSI 890GXM-G65 (http://www.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=& cat3_no=&prod_no=2012). http://download1.msi.com/files/downloads/bos_exe/7642v12.zip The zip file contains the following files: 4.0K 7642v12/7642v1x.txt 2.1M 7642v12/A7642AMS.120 148K 7642v12/AFUD4310.EXE 56K 7642v12/How to flash the BIOS.DOC Am I right to assume that the largest file "A7642AMS.120" (2.1 MB) is the BIOS file? Here's the edited result of the "file" command on the files within the directory: 7642v12/7642v1x.txt: ISO-8859 English text [...] 7642v12/A7642AMS.120: data 7642v12/AFUD4310.EXE: MS-DOS executable 7642v12/How to flash the BIOS.DOC: CDF V2 Document, [...] The file "A7642AMS.120" is identified only as generic "data".

3 2

Arima HDAMA REV G
by Robert 22 Apr '10

22 Apr '10

flashrom v0.9.1-r994 on Linux 2.6.31.5-127.fc12.i686.PAE (i686), built with libpci 3.1.6, GCC 4.4.3 20100127 (Red Hat 4.4.3-4) No coreboot table found. DMI string system-manufacturer: "# SMBIOS implementations newer than version 2.6 are not" DMI string system-product-name: "# SMBIOS implementations newer than version 2.6 are not" DMI string system-version: "# SMBIOS implementations newer than version 2.6 are not" DMI string baseboard-manufacturer: "# SMBIOS implementations newer than version 2.6 are not" DMI string baseboard-product-name: "# SMBIOS implementations newer than version 2.6 are not" DMI string baseboard-version: "# SMBIOS implementations newer than version 2.6 are not" DMI string chassis-type: "# SMBIOS implementations newer than version 2.6 are not" Found chipset "AMD AMD8111", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 1194M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10003 us, OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x4e, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x4e, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Lock status for 0x000000 (size 0x010000) is 01, write locked Lock status for 0x010000 (size 0x010000) is 01, write locked Lock status for 0x020000 (size 0x010000) is 01, write locked Lock status for 0x030000 (size 0x010000) is 01, write locked Lock status for 0x040000 (size 0x010000) is 01, write locked Lock status for 0x050000 (size 0x010000) is 01, write locked Lock status for 0x060000 (size 0x010000) is 01, write locked Lock status for 0x070000 (size 0x010000) is 01, write locked Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xbf, id2 0xdf, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xbe, id2 0xad, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60, id1 is normal flash content Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI [1022:7460] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 115 Bus: primary=00, secondary=01, subordinate=01, sec-latency=36 I/O behind bridge: 00002000-00002fff Memory behind bridge: fc100000-fdffffff Prefetchable memory behind bridge: 80000000-800fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [c0] HyperTransport: Slave or Primary Interface Command: BaseUnitID=6 UnitCnt=4 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.02 Link Frequency 0: 200MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration 00: 22 10 60 74 17 00 30 02 07 00 04 06 00 73 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 24 20 20 00 22 20: 10 fc f0 fd 00 80 00 80 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 0e 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 04 06 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 08 f0 86 00 20 00 00 00 d0 00 00 00 22 00 01 00 d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 0d 00 00 00 10 00 00 00 18 00 00 00 00 00 f0: 08 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468] (rev 05) Subsystem: Rioworks Device [161f:3016] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 22 10 68 74 0f 00 20 02 05 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 16 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 30 07 f1 01 00 00 80 0b 71 00 01 00 00 00 c0 50: 00 00 00 00 8d 71 00 00 43 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 1f 16 16 30 00 11 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Rioworks Device [161f:3016] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 1020 [size=16] Kernel driver in use: pata_amd Kernel modules: pata_amd 00: 22 10 69 74 05 00 00 02 03 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 10 00 00 00 00 00 00 00 00 00 00 1f 16 16 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 03 f0 00 00 00 00 00 00 99 99 99 99 aa 00 a8 a8 50: 03 03 03 03 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 1f 16 16 30 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b] (rev 05) Subsystem: Rioworks Device [161f:3016] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd756_smbus Kernel modules: i2c-amd756, amd-rng 00: 22 10 6b 74 00 00 80 02 05 00 80 06 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 16 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 80 b1 09 47 00 00 00 00 20 04 40 00 00 00 00 00 50: 01 81 00 00 0f 00 00 00 01 80 00 00 00 00 00 00 60: 00 00 80 06 13 00 00 00 00 00 00 00 00 00 00 00 70: 06 29 4b 55 0c 00 00 00 00 00 00 00 1f 16 16 30 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: ec b6 4e 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 33 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: fe000000-fe0fffff Prefetchable memory behind bridge: 0000000080100000-00000000801fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=14 CommitmentLimit=65535 Downstream: Capacity=2 CommitmentLimit=65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration Capabilities: [c0] HyperTransport: Slave or Primary Interface Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.02 Link Frequency 0: 600MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 00: 22 10 50 74 17 00 30 02 12 00 04 06 00 21 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 20 31 31 20 02 20: 00 fe 00 fe 11 80 11 80 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 04 00 40: 06 00 1f 00 01 00 00 00 02 0d 00 00 01 2c 00 00 50: 00 00 03 00 00 00 04 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 03 00 50 00 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 c0 00 80 00 00 00 03 c0: 08 00 4a 00 20 00 11 11 20 00 00 00 22 04 35 00 d0: 02 00 35 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 0e 00 00 00 0e 00 00 00 19 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4K] 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 10: 04 00 00 fc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 03 00 00 00 04 00 00 fc 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 33 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=00:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=14 CommitmentLimit=65535 Downstream: Capacity=2 CommitmentLimit=65535 Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration 00: 22 10 50 74 17 00 30 02 12 00 04 06 00 21 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 20 f1 01 20 22 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 04 00 40: 04 00 0b 00 00 00 00 00 00 00 00 00 01 2c 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 c3 00 58 00 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 00 00 80 00 00 00 04 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fc001000 (64-bit, non-prefetchable) [size=4K] 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 10: 04 10 00 fc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 03 00 00 00 04 10 00 fc 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 600MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 800MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=N/C DwFcInEn- LWO=N/C DwFcOutEn- Revision ID: 1.02 Link Frequency: 200MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 05 00 04 04 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 10 00 01 00 e4 00 00 00 00 c8 0e 0f 1c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 a0 01 21 20 00 11 11 22 04 75 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 08 c0 01 21 20 00 11 11 22 05 75 80 02 00 00 00 b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00 c0: 08 00 01 21 d0 00 11 77 22 00 75 80 02 00 00 00 d0: 74 04 01 02 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 03 00 40 00 01 00 7f 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 fc 00 80 2f fe 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 c0 fe 00 00 c0 fe 00 03 0a 00 00 00 0b 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 33 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 01 10 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 ee e0 03 00 ee e0 03 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 70 00 00 00 00 00 00 00 25 31 62 03 20 09 10 00 90: 00 8c 2a 08 09 0c 2b 0a 00 00 00 00 09 04 40 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 1c 0b 58 dd a8 00 00 00 9d 3f 00 10 c1 06 f4 7b c0: 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 2f 00 23 10 8d 4c 41 36 ea 85 11 64 0c 5b 1c e0: 00 7e a0 89 f3 c0 00 81 f0 59 d2 98 53 44 3b cb f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 00 00 40 00 40 02 00 00 00 00 00 00 00 00 50: 48 48 8e 88 90 00 00 00 10 00 00 00 81 a2 20 02 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 40 02 aa 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 16 00 00 40 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 07 a7 e2 04 10 27 40 20 25 25 25 00 e0: 00 00 00 00 24 07 00 09 1b 01 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=N/C DwFcInEn- LWO=N/C DwFcOutEn- Revision ID: 1.02 Link Frequency: 200MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- Capabilities: [a0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 1.02 Link Frequency: 800MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- Capabilities: [c0] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=N/C DwFcInEn- LWO=N/C DwFcOutEn- Revision ID: 1.02 Link Frequency: 200MHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE- 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 04 04 01 00 01 01 05 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 11 00 01 00 e4 00 00 00 00 c8 0e 0f 14 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 a0 01 21 d0 00 11 77 22 00 75 80 02 00 00 00 90: 96 51 53 07 00 00 00 00 00 00 00 00 00 00 00 00 a0: 08 c0 01 21 20 00 11 11 22 05 75 80 02 00 00 00 b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00 c0: 08 00 01 21 d0 00 11 77 22 00 75 80 02 00 00 00 d0: ac 02 50 01 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 03 00 40 00 01 00 7f 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 fc 00 80 2f fe 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 c0 fe 00 00 c0 fe 00 03 0a 00 00 00 0b 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 33 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 fe e0 03 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 90 00 00 00 00 00 00 00 25 31 62 03 20 09 10 00 90: 00 8c 2a 08 09 0c 2b 0a 00 00 00 00 09 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 2c 47 a6 85 a8 00 00 00 03 24 ac 24 f0 50 73 70 c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: ba a2 97 49 62 98 b5 3e d1 28 5f 41 40 03 7a 73 e0: 24 66 8f 2a 5e 5a 82 bf ea 64 b6 71 00 72 85 f1 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 00 00 40 00 40 02 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 10 00 00 00 c1 d9 2d 42 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 79 d6 ad 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 03 00 00 40 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 07 a7 e2 04 10 27 40 20 25 25 25 00 e0: 00 00 00 00 24 00 00 0a 1b 01 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI]) Subsystem: Rioworks Device [161f:3016] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 22 10 64 74 17 00 80 02 0b 10 03 0c 00 20 80 00 10: 00 00 10 fc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 16 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 50 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 1f 16 16 30 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI]) Subsystem: Rioworks Device [161f:3016] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at fc101000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 22 10 64 74 17 00 80 02 0b 10 03 0c 00 20 00 00 10: 00 10 10 fc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 1f 16 16 30 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 50 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 1f 16 16 30 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:06.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Rage XL [1002:8008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at fc102000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel modules: atyfb 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 42 00 00 10: 00 00 00 fd 01 20 00 00 00 20 10 fc 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80 30: 00 00 00 00 5c 00 00 00 00 00 00 00 0a 01 08 00 40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 5c 10 00 01 00 00 ff 00 00 00 00 01 00 02 06 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:03.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet [14e4:16a6] (rev 02) Subsystem: Broadcom Corporation BCM5702 1000Base-T [14e4:000c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 80180000 [disabled] [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme Gigabit Ethernet Controller Read-only fields: [PN] Part number: BCM95702A20 [EC] Engineering changes: 106679-15 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 25 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 0000000100000000 Data: ffff Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 a6 16 06 00 b0 02 02 00 00 02 10 40 00 00 10: 04 00 00 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 e4 14 0c 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00 40: 07 48 02 00 f9 ff 43 04 01 50 02 c0 00 20 00 64 50: 03 58 fc 80 00 00 00 78 05 00 86 00 00 00 00 00 60: 01 00 00 00 ff ff 00 00 98 02 02 10 00 00 3f 76 70: fe 10 00 00 df 00 00 80 4c 5b 03 00 00 00 00 00 80: 00 00 00 00 98 d6 bf 6a 34 00 13 04 82 10 08 00 90: 09 92 00 01 64 00 00 00 00 00 00 00 f6 01 00 00 a0: 00 00 00 00 2e 01 00 00 00 00 00 00 64 00 00 00 b0: 00 00 00 00 00 00 00 78 00 00 00 00 00 00 00 78 c0: 00 00 00 00 00 00 00 78 00 00 00 00 00 00 00 78 d0: 00 00 00 00 00 00 00 78 00 00 00 00 00 00 00 78 e0: 00 00 00 00 00 00 00 78 00 00 00 00 00 00 00 78 f0: 00 00 00 00 00 00 00 78 00 00 00 00 00 00 00 78 02:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet [14e4:16a6] (rev 02) Subsystem: Broadcom Corporation BCM5702 1000Base-T [14e4:000c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe010000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 80190000 [disabled] [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme Gigabit Ethernet Controller Read-only fields: [PN] Part number: BCM95702A20 [EC] Engineering changes: 106679-15 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 25 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 0000000100000000 Data: ffff Kernel driver in use: tg3 Kernel modules: tg3 00: e4 14 a6 16 06 00 b0 02 02 00 00 02 10 40 00 00 10: 04 00 01 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 e4 14 0c 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00 40: 07 48 02 00 f9 ff 43 04 01 50 02 c0 00 20 00 64 50: 03 58 fc 80 00 00 00 78 05 00 86 00 00 00 00 00 60: 01 00 00 00 ff ff 00 00 98 02 02 10 00 00 3f 76 70: fe 10 00 00 bf 00 00 80 4c 5b 03 00 00 00 00 00 80: 00 00 00 00 c3 ec eb a6 34 00 13 04 82 10 08 00 90: 09 92 00 01 00 00 00 37 00 00 00 00 f8 00 00 00 a0: 00 00 00 00 30 00 00 00 00 00 00 00 06 00 00 00 b0: 00 00 00 00 00 00 00 37 00 00 00 00 00 00 00 37 c0: 00 00 00 00 00 00 00 37 00 00 00 00 00 00 00 37 d0: 00 00 00 00 00 00 00 37 00 00 00 00 00 00 00 37 e0: 00 00 00 00 00 00 00 37 00 00 00 00 00 00 00 37 f0: 00 00 00 00 00 00 00 37 00 00 00 00 00 00 00 37 02:05.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) Subsystem: Silicon Image, Inc. SiI 3114 SATARaid Controller [1095:6114] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: I/O ports at 3020 [size=8] Region 1: I/O ports at 3014 [size=4] Region 2: I/O ports at 3018 [size=8] Region 3: I/O ports at 3010 [size=4] Region 4: I/O ports at 3000 [size=16] Region 5: Memory at fe020000 (32-bit, non-prefetchable) [size=1K] [virtual] Expansion ROM at 80100000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: sata_sil Kernel modules: sata_sil 00: 95 10 14 31 07 00 b0 02 02 00 04 01 10 20 00 00 10: 21 30 00 00 15 30 00 00 19 30 00 00 11 30 00 00 20: 01 30 00 00 00 00 02 fe 00 00 00 00 95 10 14 61 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00 40: 02 00 00 00 00 02 08 09 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00 70: 00 00 60 00 00 00 a5 36 00 00 60 00 00 00 00 00 80: 03 00 00 00 22 00 00 00 00 00 01 00 7f 70 fb fb 90: 00 00 00 09 ff ff 00 00 00 00 00 19 00 00 00 00 a0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 b0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 c0: 84 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 superiotool r4931 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xc0c0, rev=0xc0 Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x0503, id=0x11e1 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xe111, rev=0x0 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xe111, rev=0x0 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xe111, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xe111, rev=0x0 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Found NSC PC87360 (sid=0xe1, srid=0x0f) at 0x2e Register dump: idx 20 21 22 23 24 25 26 27 28 2a 2b 2c 2d 2e val e1 11 00 03 05 00 00 0f 00 00 10 00 18 00 def e1 11 00 03 00 00 00 NA 00 MM 00 00 00 RR LDN 0x00 (Floppy) idx 30 60 61 70 71 74 75 f0 f1 val 01 03 f0 06 03 02 04 20 00 def 00 03 f2 06 03 02 04 24 00 LDN 0x01 (Parallel port) idx 30 60 61 70 71 74 75 f0 val 01 03 78 07 02 04 04 f2 def 00 02 78 07 02 04 04 f2 LDN 0x02 (COM2) idx 30 60 61 70 71 74 75 f0 val 01 02 f8 03 03 04 04 02 def 00 02 f8 03 03 04 04 02 LDN 0x03 (COM1) idx 30 60 61 70 71 74 75 f0 val 01 03 f8 04 03 04 04 02 def 00 03 f8 04 03 04 04 02 LDN 0x04 (System wake-up control (SWC)) idx 30 60 61 70 71 74 75 val 00 00 00 00 03 04 04 def 00 00 00 00 03 04 04 LDN 0x05 (Mouse) idx 30 70 71 74 75 val 01 0c 03 04 04 def 00 0c 02 04 04 LDN 0x06 (Keyboard) idx 30 60 61 62 63 70 71 74 75 f0 val 01 00 60 00 64 01 03 04 04 40 def 01 00 60 00 64 01 02 04 04 40 LDN 0x07 (GPIO) idx 30 60 61 70 71 74 75 f0 f1 f2 val 00 00 00 00 03 04 04 00 44 01 def 00 00 00 00 03 04 04 00 00 00 LDN 0x08 (ACCESS.bus (ACB)) idx 30 60 61 70 71 74 75 f0 val 00 00 00 00 03 04 04 00 def 00 00 00 00 03 04 04 00 LDN 0x09 (Fan speed control and monitor (FSCM)) idx 30 60 61 70 71 74 75 f0 val 00 00 00 00 03 04 04 00 def 00 00 00 00 03 04 04 00 LDN 0x0a (Watchdog timer) idx 30 60 61 70 71 74 75 f0 val 00 00 00 00 03 04 04 02 def 00 00 00 00 03 04 04 02 Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xe1, rev=0x11 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xc0, rev=0xc0 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xc0, rev=0xc0 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xe1/0x00, rev=0x11 Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xe1/0x00, rev=0x11 Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xe1/0x00, rev=0x11 Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xe1/0x00, rev=0x11 Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xc0/0x00, rev=0xc0 Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xc0/0x00, rev=0xc0 Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xc0/0x00, rev=0xc0 Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xc0/0x00, rev=0xc0 Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

1 0

[PATCH] Board-enable for MS-7025 (K8N Neo2 Platinum)
by Michael Karcher 21 Apr '10

21 Apr '10

now includes the PCI ID of the nForce3 MCP. AND THE RIGHT PATCH! Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 10 ++++++++++ chipset_enable.c | 1 + print_wiki.c | 1 + 3 files changed, 12 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index f1f7953..5e7a774 100644 --- a/board_enable.c +++ b/board_enable.c @@ -523,6 +523,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) case 0x0030: /* CK804 */ case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ + case 0x00E0: /* nForce3 MCP */ break; default: /* Newer MCPs use the SMBus Controller */ @@ -586,6 +587,14 @@ static int nvidia_mcp_gpio8_raise(const char *name) } /** + * Suited for MSI K8N Neo2 Platinum: Socket 939 + nForce3 Ultra + MCP04. + */ +static int nvidia_mcp_gpio0c_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x0c, 1); +} + +/** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ static int nvidia_mcp_gpio10_raise(const char *name) @@ -1403,6 +1412,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, "MSI", "MS-7005 (651M-L)", 0, OK, board_msi_651ml}, + {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, "MSI", "MS-7025 (K8N Neo2)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", 0, OK, w83627thf_gpio4_4_raise_4e}, {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, "MSI", "MS-7207 (K8N GM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, diff --git a/chipset_enable.c b/chipset_enable.c index fc60484..bbfcdaa 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1347,6 +1347,7 @@ const struct penable chipset_enables[] = { {0x10de, 0x0050, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* LPC */ {0x10de, 0x0051, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* Pro */ {0x10de, 0x0060, OK, "NVIDIA", "NForce2", enable_flash_nvidia_nforce2}, + {0x10de, 0x00e0, OK, "NVIDIA", "NForce3", enable_flash_nvidia_nforce2}, /* Slave, should not be here, to fix known bug for A01. */ {0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804}, {0x10de, 0x0260, NT, "NVIDIA", "MCP51", enable_flash_ck804}, diff --git a/print_wiki.c b/print_wiki.c index 87adf4d..720f387 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -263,6 +263,7 @@ const struct board_info_url boards_url[] = { { "MSI", "MS-6712 (KT4V)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=505" }, { "MSI", "MS-7005 (651M-L)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=559" }, { "MSI", "MS-7046", "http://www.heimir.de/ms7046/" }, + { "MSI", "MS-7025 (K8N Neo2)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=587" }, { "MSI", "MS-7135 (K8N Neo3)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170" }, { "Shuttle", "AK31", "http://www.motherboard.cz/mb/shuttle/AK31.htm" }, { "Shuttle", "AK38N", "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/" }, -- 1.7.0

1 0

[PATCH] Board-enable for MS-7025 (K8N Neo2 Platinum)
by Michael Karcher 21 Apr '10

21 Apr '10

now includes the PCI ID of the nForce3 MCP. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 9 +++++++++ chipset_enable.c | 1 + print_wiki.c | 1 + 3 files changed, 11 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index f1f7953..15ddf2a 100644 --- a/board_enable.c +++ b/board_enable.c @@ -586,6 +586,14 @@ static int nvidia_mcp_gpio8_raise(const char *name) } /** + * Suited for MSI K8N Neo2 Platinum: Socket 939 + nForce3 Ultra + MCP04. + */ +static int nvidia_mcp_gpio0c_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x0c, 1); +} + +/** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ static int nvidia_mcp_gpio10_raise(const char *name) @@ -1403,6 +1411,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio4_4_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, "MSI", "MS-7005 (651M-L)", 0, OK, board_msi_651ml}, + {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, "MSI", "MS-7025 (K8N Neo2)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", 0, OK, w83627thf_gpio4_4_raise_4e}, {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, "MSI", "MS-7207 (K8N GM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, diff --git a/chipset_enable.c b/chipset_enable.c index fc60484..bbfcdaa 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1347,6 +1347,7 @@ const struct penable chipset_enables[] = { {0x10de, 0x0050, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* LPC */ {0x10de, 0x0051, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* Pro */ {0x10de, 0x0060, OK, "NVIDIA", "NForce2", enable_flash_nvidia_nforce2}, + {0x10de, 0x00e0, OK, "NVIDIA", "NForce3", enable_flash_nvidia_nforce2}, /* Slave, should not be here, to fix known bug for A01. */ {0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804}, {0x10de, 0x0260, NT, "NVIDIA", "MCP51", enable_flash_ck804}, diff --git a/print_wiki.c b/print_wiki.c index 87adf4d..720f387 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -263,6 +263,7 @@ const struct board_info_url boards_url[] = { { "MSI", "MS-6712 (KT4V)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=505" }, { "MSI", "MS-7005 (651M-L)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=559" }, { "MSI", "MS-7046", "http://www.heimir.de/ms7046/" }, + { "MSI", "MS-7025 (K8N Neo2)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=587" }, { "MSI", "MS-7135 (K8N Neo3)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170" }, { "Shuttle", "AK31", "http://www.motherboard.cz/mb/shuttle/AK31.htm" }, { "Shuttle", "AK38N", "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/" }, -- 1.7.0

1 0

MSI K8N Neo2 (Platinum) support
by rider 21 Apr '10

21 Apr '10

Here is the diagnostic information on MSI K8N Neo2 Platinum board.

2 1

[commit] r994 - trunk
by repository service 20 Apr '10

20 Apr '10

Author: ruik Date: Tue Apr 20 21:34:31 2010 New Revision: 994 URL: http://flashrom.org/trac/coreboot/changeset/994 Log: I added following Winbond chips: W25Q80, W25Q16 and W25Q32. I tested read/write/probe with W25Q80. Signed-off-by: Rudolf Marek <r.marek(a)assembler.cz> Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun Apr 11 23:01:06 2010 (r993) +++ trunk/flashchips.c Tue Apr 20 21:34:31 2010 (r994) @@ -5593,6 +5593,108 @@ { .vendor = "Winbond", + .name = "W25Q80", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = W_25Q80, + .total_size = 1024, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Winbond", + .name = "W25Q16", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = W_25Q16, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Winbond", + .name = "W25Q32", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = W_25Q32, + .total_size = 4096, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Winbond", .name = "W25x10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun Apr 11 23:01:06 2010 (r993) +++ trunk/flashchips.h Tue Apr 20 21:34:31 2010 (r994) @@ -506,6 +506,9 @@ #define W_25X16 0x3015 #define W_25X32 0x3016 #define W_25X64 0x3017 +#define W_25Q80 0x4014 +#define W_25Q16 0x4015 +#define W_25Q32 0x4016 #define W_29C011 0xC1 #define W_29C020C 0x45 /* Same as W29C020 and ASD AE29F2008 */ #define W_29C040P 0x46 /* Same as W29C040 */

1 0

Successful flash of Asus Rampage II Extreme motherboard
by Stephen Pape 20 Apr '10

20 Apr '10

I was able to successfully write a new firmware image from Asus for a Rampage II Extreme using flashrom v0.9.1-r710 . It asked me to send the verbose log, as it was formerly untested, so it is attached. Thanks!

1 0

Re: [flashrom] ASUS A8N-VM CSM results (write/erase failed) / ASUS P2B-LS status?
by Keith Hui 19 Apr '10

19 Apr '10

> One note about the board testing Wiki page you may want to clarify: > > "To check if you can read the existing BIOS image from the chip, run flashrom > -r backup.bin. Make sure that backup.bin contains a useful BIOS image. (Some > chipsets will return 0xff for large areas of flash without any error > messages.)" > > For a BIOS newbie like me, the remark in parenthesis doesn't tell much - is it > a good or a bad sign if a chipset returns 0xff for large areas of flash > without any error messages? (Bad, I guess ;)) While booted with factory BIOS, make note of the BIOS version you currently have. Compare the backup image with a copy downloaded from ASUS. If they are mostly the same with only configuration store areas differing, you should be fine. --- By the way, what is the status of ASUS P2B-LS support? I reported here earlier that the same support mechanisms for P2B-F also work for the LS. And I have successfully flashed multiple times on a SST 39SF020 chip. Thanks Keith

1 0

SST25VF016B flash chip is not respondin in INTEL EP80579 PROCESSOR using Flashrom utility
by sougata barik 15 Apr '10

15 Apr '10

Hi, I am unable to use flashrom utility in my system. I am using EP80579 processor by Intel ans having one flashchip SST25VF061B which is connected to the processor by SPI interface. > [root@localhost flashrom-0.9.0]# ./flashrom -V > Calibrating delay loop... 339M loops per second, 100 myus = 198 us. OK. > No coreboot table found. > Found chipset "Intel EP80579", enabling flash write... > BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 > > Root Complex Register Block address = 0xfed1c000 > GCS = 0xd70260: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x0 (SPI) > Top Swap : not enabled > SPIBAR = 0xfed1c000 + 0x3020 > 0x00: 0x800c (SPIS) > 0x02: 0x4140 (SPIC) > 0x04: 0x00000000 (SPIA) > 0x08: 0x0000411c (SPID0) > 0x0c: 0x00000000 (SPID0+4) > 0x10: 0x00000000 (SPID1) > 0x14: 0x00000000 (SPID1+4) > 0x18: 0x00000000 (SPID2) > 0x1c: 0x00000000 (SPID2+4) > 0x20: 0x00000000 (SPID3) > 0x24: 0x00000000 (SPID3+4) > 0x28: 0x00000000 (SPID4) > 0x2c: 0x00000000 (SPID4+4) > 0x30: 0x00000000 (SPID5) > 0x34: 0x00000000 (SPID5+4) > 0x38: 0x00000000 (SPID6) > 0x3c: 0x00000000 (SPID6+4) > 0x40: 0x00000000 (SPID7) > 0x44: 0x00000000 (SPID7+4) > 0x50: 0x00e00000 (BBAR) > 0x54: 0x5006 (PREOP) > 0x56: 0x163b (OPTYPE) > 0x58: 0x05200302 (OPMENU) > 0x5c: 0x00016090 (OPMENU+4) > 0x60: 0x00000000 (PBR0) > 0x64: 0x00000000 (PBR1) > 0x68: 0x00000000 (PBR2) > 0x6c: 0x00000000 (PBR3) > > WARNING: SPI Configuration Lockdown activated. > Generating OPCODES... done > SPI Read Configuration: prefetching disabled, caching enabled, OK. > Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0x00, id2 0x00 > Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Atmel AT25DF021, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF041A, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF081, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF161, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF321, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF321A, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25DF641, 8192 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25F512B, 64 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25FS010, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT25FS040, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT26DF041, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT26DF081A, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT26DF161, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT26DF161A, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT26F004, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Atmel AT45CS1282, 16896 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB011D, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB021D, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB041D, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB081D, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB161D, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB321C, 4224 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB321D, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT45DB642D, 8192 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for AMIC A25L40P, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x00, id2 0x00 > Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x00, id2 0x00 > Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff > Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff > Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff > Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff > Probing for Macronix MX25L512, 64 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L1005, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L2005, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L4005, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L8005, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L1605, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L1635D, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L3205, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L3235D, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L6405, 8192 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX25L12805, 16384 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x00, id2 0x00 > Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x00, id2 0x00 > Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0xff, id2 0xff > Probing for Numonyx M25PE10, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Numonyx M25PE20, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Numonyx M25PE40, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Numonyx M25PE80, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Numonyx M25PE16, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV010, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV016B, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV020, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV040, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV080B, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm25LV512, 64 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff > Probing for Spansion S25FL016A, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF016B, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF032B, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF040B, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF040.REMS, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF040B.REMS, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST25VF080B, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff > Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x0b, id2 0x72 > Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff > Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff > Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0x00, id2 0x00 > Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0x00, id2 0x00 > Probing for ST M25P05-A, 64 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P10-A, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P20, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P40, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P40-old, 512 KB: Transaction error! > run OPCODE 0x90 failed > Invalid OPCODE 0xab > Probing for ST M25P80, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P16, 2048 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P32, 4096 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P64, 8192 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M25P128, 16384 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff > Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff > Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for ST M29W040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff > Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff > Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff > Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff > Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x00, id2 0x00 > Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x00, id2 0x00 > Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff > Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff > Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W25x10, 128 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Winbond W25x20, 256 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Winbond W25x40, 512 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Winbond W25x80, 1024 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xea, id2 0xd0 > Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W29EE011, 128 KB: > === > Probing disabled for Winbond W29EE011 because the probing sequence puts the > AMIC A49LF040A in a funky state. > Use 'flashrom -c W29EE011' if you have a board with this chip. > === > Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation > Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation > Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff > Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0xff, did 0xff > Probing for Atmel unknown Atmel SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > Probing for EON unknown EON SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > Probing for Macronix unknown Macronix SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > Probing for PMC unknown PMC SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > Probing for SST unknown SST SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > Probing for ST unknown ST SPI chip, 0 KB: Transaction error! > run OPCODE 0x90 failed > No EEPROM/flash device found. > If you know which flash chip you have, and if this version of flashrom > supports a similar flash chip, you can try to force read your chip. Run: > flashrom -f -r -c similar_supported_flash_chip filename > > Note: flashrom can never write when the flash chip isn't found automatically. > [root@localhost flashrom-0.9.0]# > > [root@localhost flashrom-0.9.0]# ./flashrom > Calibrating delay loop... OK. > No coreboot table found. > Found chipset "Intel EP80579", enabling flash write... WARNING: SPI Configuration Lockdown activated. > OK. > No EEPROM/flash device found. > If you know which flash chip you have, and if this version of flashrom > supports a similar flash chip, you can try to force read your chip. Run: > flashrom -f -r -c similar_supported_flash_chip filename > > Note: flashrom can never write when the flash chip isn't found automatically. > [root@localhost flashrom-0.9.0]# please tell me what should I change to work this utility. Regards Sougata Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 1

Board enable needed for MS-6309 Lite
by Milan Prvulovic 14 Apr '10

14 Apr '10

Exact name of my board is MSI MS-6309 Lite PCB revision 2.0 overview page - http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&p… BIOS download page - http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&pro…

2 1

Re: [flashrom] [PATCH] Board enable (EC sleep) for Acer Ferrari 3400
by Michael Karcher 12 Apr '10

12 Apr '10

Am Montag, den 12.04.2010, 02:35 +0200 schrieb Magnus Alm: > OK, I got a problem now, tested "flashrom -EV", bad idea it seems, now > I cant write the BACKUP.ROM back. Oh, this looks like you *really* have a problem now. I'm sorry I didn't think of this case beforehand, but I seriously doubt that it is possible to fix the situation from within the running system. The problem on your system (which carldani correctly recognized) is the following. The data flow to the ROM chip is like Processor --HT--> Southbridge --LPC/FWH--> Embedded Controller --FWH--> Flash chip The embedded controller uses parts of the flash contents as instructions. There is one magic instruction (or two in your case) that make the EC spin in an idle loop that doesn't access the flash chip. In this configuration, the processor can access the flash chip as it likes to. But this idle loop drops all EC functionality like keyboard, mouse, fan control, brightness control, temperature monitoring and so on, so you should only use it for limited amounts of time. When the processor is finished with updating the flash chip, it sends a magic "exit the idle loop" instruction to the EC. Now, after you used flashrom -E on your flash chip, the EC program crashes when it tries to resume. On your system, it seemed to have the EC crashed so hard, that it doesn't pass the flash commands from the south bridge to the flash chip. As fan control is done by EC code in some systems, your situation might even cause overheating of the whole system until thermal breakdown. If your system is not damaged by heat, it is now in a configuration it is directly after manufacturing the board - so there definitely *is* a way to rewrite the flash chip in system, as vendors usually don't pre-program the flash chips before assembling the board. But this way might include special vendor tools in hardware (like test pins contacting the board on special position) or software (like a special protocal over JEDEC pins) we don't have. As your system is bricked anyway now, you could open it up and try to find the EC (a bigger chip, but not the northbridge, southbridge, graphics chip, LAN chip or audio chip) and check whether there is a usable datasheet for it. > Note: flashrom can never write when the flash chip isn't found automatically. And that is for a reason. If the flash chip is not found automatically, it means we didn't get the probe command to the chip. In times before we had these SPI firewalling chipsets (you don't have one), this was a clear indication that we also can't get erase or write commands to the chip. So erasing/writing if detection of a known chip fails is generally futile. I am sorry that I didn't think about the danger beforehands. I will definitely think about a protection mechanism that prevents this happening again before the patch goes into main flashrom. Regards, Michael Karcher

1 0

Acer Ferrari 3400 doesn't work with Flashrom
by Magnus Alm 12 Apr '10

12 Apr '10

When running "sudo flashrom" I gett the following output: flashrom v0.9.1-r946 No coreboot table found. ======================================================================== WARNING! You seem to be running flashrom on a laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. ======================================================================== Found chipset "VIA VT8235", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST39SF040" (512 KB, Parallel) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. After this the keyboard and touchpad stops working. Also one of the thermal sensors stops working too. Plugging in a usb mouse allows me to shut down the laptop nicely tho. >From syslog after: Apr 11 10:13:33 Ferry kernel: [ 488.402186] __ratelimit: 21 callbacks suppressed Apr 11 10:13:33 Ferry kernel: [ 488.402190] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. Apr 11 10:13:36 Ferry kernel: [ 490.588044] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) Apr 11 10:13:36 Ferry kernel: [ 490.588076] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node f7010a50), AE_TIME Apr 11 10:13:36 Ferry kernel: [ 491.272032] ACPI: EC: input buffer is not empty, aborting transaction Apr 11 10:13:36 Ferry kernel: [ 491.272048] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) Apr 11 10:13:36 Ferry kernel: [ 491.272076] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node f7010a50), AE_TIME Apr 11 10:13:38 Ferry kernel: [ 492.588031] ACPI: EC: input buffer is not empty, aborting transaction Running "sudo flashrom" once more after reboot will cause the laptop to reboot immediately. Shutting down and removing power cable and battery resets the condition so "sudo flashrom" just disables keyboard/touchpad. Running "sudo flashrom -r backup.rom" will cause the laptop to shut down immediately. I read some abut making support for a laptop but it seemed a bit complicated for me. /Magnus

3 5

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom