- flashrom - mail.coreboot.org

[commit] r1019 - trunk
by repository service 30 May '10

30 May '10

Author: uwe Date: Sun May 30 19:00:19 2010 New Revision: 1019 URL: http://flashrom.org/trac/coreboot/changeset/1019 Log: Update the status for the following chips: - Eon EN25F80 (reported by oops66 <oops66(a)wanadoo.fr>) Probe and read tested. http://www.flashrom.org/pipermail/flashrom/2010-May/003183.html - AMIC A49LF040A (reported by Guenter <lists(a)gknw.net>) Read (thus also probe), write (thus also erase), and verify tested. http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html Also reported by Robert Grasso <robert.grasso(a)modulonet.fr>. http://www.flashrom.org/pipermail/flashrom/2010-May/003006.html - SST SST49LF008A (reported by Marco Giacinti <marcogiacinti(a)hotmail.it>) Erase tested. http://www.flashrom.org/pipermail/flashrom/2010-May/003010.html - SST SST29EE020A (reported by Anders Jenbo <anders(a)jenbo.dk>) Write (and thus erase) tested. http://www.flashrom.org/pipermail/flashrom/2010-April/002961.html - SST SST49LF040 (reported by David Westberg <david(a)uarda.dlinkddns.com>) Probe and read tested. http://www.flashrom.org/pipermail/flashrom/2010-April/002862.html - Winbond W39V080FA (reported by Maciej Żenczykowski <zenczykowski(a)gmail.com>) All operations tested. http://www.flashrom.org/pipermail/flashrom/2010-April/002863.html - Winbond W29C020C (reported by Urja Rannikko <urjaman(a)gmail.com>) Erase tested. http://www.flashrom.org/pipermail/flashrom/2010-April/002847.html - PMC Pm39LV010 (reported by Tim Small <tim(a)seoss.co.uk>) Write (and thus also erase) tested. http://www.flashrom.org/pipermail/flashrom/2010-March/002711.html Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun May 30 18:55:18 2010 (r1018) +++ trunk/flashchips.c Sun May 30 19:00:19 2010 (r1019) @@ -1293,7 +1293,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -2009,7 +2009,7 @@ .model_id = EN_25F80, .total_size = 1024, .page_size = 256, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3440,7 +3440,7 @@ .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -3964,7 +3964,7 @@ .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -4375,7 +4375,7 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -4528,7 +4528,7 @@ .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -5939,7 +5939,7 @@ .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = @@ -6237,7 +6237,7 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers =

2 1

PMC Pm39LV010 verified with v0.9.1-r946
by Tim Small 30 May '10

30 May '10

Hi, PMC Pm39LV010 verified with v0.9.1-r946 - output below. I an also verify that the probed flash part is the one soldered down on the board (sil3132 PCIe add-in card). Thanks for the great piece of software! Cheers, Tim. root@netboot:~# flashrom -wV -p satasii:01:00.0 SiI3132_7702/SiI3132_r7702.bin flashrom v0.9.1-r946 Found "Silicon Image SiI 3132 SATA Raid II Ctrl" (1095:3132, BDF 01:00.0). Requested BAR is MEM, 64bit, not prefetchable Mapping SATA SIL registers at 0xd0084000, unaligned size 0x100. Calibrating delay loop... 493M loops per second, 100 myus = 200 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Eon EN25B05, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x6c Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x6c Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x55, id2 0xaa Probing for Intel 82802AB, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Found chip "PMC Pm39LV010" (128 KB, Parallel) at physical address 0xfffe0000. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x55, id2 0xaa Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x55, id2 0x6c Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for ST M50FLW040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Winbond W25x10, 128 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1c Probing for Winbond W49V002A, 256 KB: skipped. Host bus type Parallel and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type Parallel and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Parallel and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, SUCCESS. Programming page: address: 0x0001f000 COMPLETE. Verifying flash... VERIFIED. -- South East Open Source Solutions Limited Registered in England and Wales with company number 06134732. Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ VAT number: 900 6633 53 http://seoss.co.uk/ +44-(0)1273-808309

2 1

flash report
by Marco Giacinti 30 May '10

30 May '10

hi, i send you my flash report on a DFI LanParty UT P35 T2S rev. A1 Marco _________________________________________________________________ Emoticon, scene, sfondi... Personalizza Messenger e il tuo PC! http://www.pimpit.it/windowslive.html

2 1

SST SST29EE020A
by Anders Jenbo 30 May '10

30 May '10

read and probe has been confirmed by others. I have also tested write and it seams to work just fine (boots fine after flashing the BISO from another chip as well as coreboot). I do tend to get validation errors if the system is to active during flashing (it's a 400Mhz P2 running Ubuntu 10.04 beta2). Disabling "verbose > file" seams to also lower the validation errors. I have attached the output from the different commands -V, -rV and -wV Hope this helps -Anders

2 1

Probe and Read works for "SST SST49LF040"
by David Westberg 30 May '10

30 May '10

Tried the neat flashrom tool on my machine. Probe and read works. Output included below. /david debian2:~/flashrom# flashrom -r backup-bios.bin Calibrating delay loop... OK. No coreboot table found. WARNING: No chipset found. Flash detection will most likely fail. Found chip "SST SST49LF040" (512 KB) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)coreboot.org if any of the above operations work correctly for you with this flash part. Please include the full output from the program, including chipset found. Thank you for your help! === Reading Flash...done debian2:~/flashrom# ls -l totalt 516 -rw-r--r-- 1 root root 524288 4 apr 10.30 backup-bios.bin

2 1

WD29C020C erase success (was UNTESTED)
by Urja Rannikko 30 May '10

30 May '10

Hi, WD29C020C's erase still works ;) To note that i disabled udelay.c's recalibration stuff for now (see the timings in the log, weird...) - I only use the serprog driver (that implements delays on the programmer device) on this machine so not a real problem for me but mysterious. command line used was: ./flashrom -p serprog:/dev/ttyUSB0:1500000 -EV > erase_wd29c020c.log Programmer device used was my self built ATMega644 USB programmer with self-written firmware implementing the serprog protocol. -- urjaman

2 1

"Winbond W39V080FA" (1024KB, FWH) on Shuttle SG33G5M Deluxe - works!
by Maciej Żenczykowski 30 May '10

30 May '10

I have a Shuttle SG33G5M Deluxe with the BIOS on a "Winbond W39V080FA" (1024KB, FWH). All operations (-V -rV -EV -wV) are confirmed working, please find logs attached. Maciej

2 1

successfully flashed my motherboard Asus P5K
by Robert Grasso 30 May '10

30 May '10

Hello, it was my first flash ever ! I just wanted to let you know that this flash proceeded successfully. I verified the BIOS versions before and after the flash. The coreboot table was not found, however I had not to state it with -m. Once the flash had been performed, I entered into the BIOS pressing Del : I was just asked to enter the BIOS in order to recover it : I had to press F1 (sorry I should have written the steps displayed on the screen) so I entered the BIOS, browsed it quickly, then exited and saved. And everything seems to be fine. Please find attached the flashrom logs reading the original BIOS, writing the new one, and verifying it. Flasrom is straightforward, and quite a nice tool ! Thanks -- Robert Grasso @home --- UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. -- Doug Gwyn

2 1

P5Q3 Asus MotherBoard - Flashrom status UNTESTED
by oops66 30 May '10

30 May '10

Hello, Here it is the result for (-V and -rV), Tx for your appli. Have a nice day -------------------------------------------------- flashrom -R flashrom v0.9.1-r946 Under Ubuntu 32bits Lucid 10.04 P5Q3 Asus MotherBoard === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! //////////////////////////////////// sudo flashrom -V ////////////////////////////////////////////////////// sudo flashrom -V flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5Q3" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2018 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 853M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xd2, id2 0x60, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. ///////////////////////////// sudo flashrom -rV PQ3-v707.ROM ///////////////////////////////////////////// sudo flashrom -rV PQ3-v707.ROM [sudo] password for christophe: flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5Q3" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10R", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2018 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 851M loops per second, 100 myus = 198 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xd2, id2 0x60, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x6e, id2 0xda Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53 Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. /////////////////////////////////////////////////////////////////////////////////

2 1

[commit] r1018 - trunk
by repository service 30 May '10

30 May '10

Author: mkarcher Date: Sun May 30 18:55:18 2010 New Revision: 1018 URL: http://flashrom.org/trac/coreboot/changeset/1018 Log: Unlocking for W39V040FA Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri May 28 19:07:57 2010 (r1017) +++ trunk/flashchips.c Sun May 30 18:55:18 2010 (r1018) @@ -6086,7 +6086,7 @@ .model_id = W_39V040FA, .total_size = 512, .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, @@ -6103,6 +6103,8 @@ .block_erase = erase_chip_block_jedec, } }, + .printlock = printlock_sst_fwhub, + .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, },

1 0

Re: [flashrom] [PATCH] Unlocking for W39V040FA
by Uwe Hermann 30 May '10

30 May '10

On Sat, May 15, 2010 at 09:19:23PM +0200, Michael Karcher wrote: > Now added the missing "REGISTERMAP" feature. Tested on hardware according to http://www.flashrom.org/pipermail/flashrom/2010-May/003078.html So: Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

[PATCH] Add hp xw9400 board enable.
by Michael Karcher 30 May '10

30 May '10

Reduced version - please check whether it works, too. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 42 ++++++++++++++++++++++++++++++++++-------- 1 files changed, 34 insertions(+), 8 deletions(-) diff --git a/board_enable.c b/board_enable.c index b5eb63f..cd15a0f 100644 --- a/board_enable.c +++ b/board_enable.c @@ -552,6 +552,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) { struct pci_dev *dev; uint16_t base; + uint16_t devclass; uint8_t tmp; if ((gpio < 0) || (gpio >= 0x40)) { @@ -566,17 +567,33 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ break; - default: - /* Newer MCPs use the SMBus Controller */ - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); - switch (dev->device_id) { - case 0x0264: /* MCP51 */ + case 0x0260: /* MCP51 */ + case 0x0364: /* MCP55 */ + /* find SMBus controller on *this* southbridge */ + /* The infamous Tyan S2915-E has two south bridges; they are + easily told apart from each other by the class of the + LPC bridge, but have the same SMBus bridge IDs */ + if (dev->func != 0) { + msg_perr("MCP LCP bridge at unexpected function" + " number %d\n", dev->func); + return -1; + } + + dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1); + if (!dev) { + msg_perr("MCP SMBus controller could not be found\n"); + return -1; + } + devclass = pci_read_word(dev, 0x0a); + if (devclass != 0x0C05) { + msg_perr("Unexpected device class %04x for SMBus" + " controller\n", devclass); + return -1; + } break; - default: + default: msg_perr("\nERROR: no NVIDIA LPC/SMBus controller found.\n"); return -1; - } - break; } base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ @@ -651,6 +668,14 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for HP xw9400 (Tyan S2915-E OEM): nVidia MCP55. + */ +static int board_hp_xw9400(const char *name) +{ + return nvidia_mcp_gpio_set(0x05, 1); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1437,6 +1462,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, board_hp_xw9400}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, -- 1.7.1

1 0

Re: [flashrom] [PATCH] Fix handling of empty dmidecode output
by Carl-Daniel Hailfinger 30 May '10

30 May '10

On 24.03.2010 17:58, Michael Karcher wrote: > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Working board
by Bas Heijermans 30 May '10

30 May '10

Hi, I tested the MSI DKA790GX Platinum (MS-7550) and it flashed fine, no problems at all. Bas.

2 1

[PATCH] Add hp xw9400 board enable.
by Michael Karcher 30 May '10

30 May '10

Now checks for the right SMBus device and is compilable. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++------- 1 files changed, 51 insertions(+), 8 deletions(-) diff --git a/board_enable.c b/board_enable.c index b5eb63f..2f3a6f4 100644 --- a/board_enable.c +++ b/board_enable.c @@ -552,6 +552,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) { struct pci_dev *dev; uint16_t base; + uint16_t devclass; uint8_t tmp; if ((gpio < 0) || (gpio >= 0x40)) { @@ -566,17 +567,33 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ break; - default: - /* Newer MCPs use the SMBus Controller */ - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); - switch (dev->device_id) { - case 0x0264: /* MCP51 */ + case 0x0260: /* MCP51 */ + case 0x0364: /* MCP55 */ + /* find SMBus controller on *this* southbridge */ + /* The infamous Tyan S2915-E has two south bridges; they are + easily told apart from each other by the class of the + LPC bridge, but have the same SMBus bridge IDs */ + if (dev->func != 0) { + msg_perr("MCP LCP bridge at unexpected function" + " number %d\n", dev->func); + return -1; + } + + dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1); + if (!dev) { + msg_perr("MCP SMBus controller could not be found\n"); + return -1; + } + devclass = pci_read_word(dev, 0x0a); + if (devclass != 0x0C05) { + msg_perr("Unexpected device class %04x for SMBus" + " controller\n", devclass); + return -1; + } break; - default: + default: msg_perr("\nERROR: no NVIDIA LPC/SMBus controller found.\n"); return -1; - } - break; } base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ @@ -651,6 +668,31 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for HP xw9400 (Tyan S2915-E OEM): nVidia MCP55. + */ +static int board_hp_xw9400(const char *name) +{ + struct pci_dev * dev; + uint16_t base; + uint16_t tmp; + dev = pci_get_dev(pacc, 0, 0, 1, 1); /* UGLY HACK! */ + if(!dev) { + fprintf(stderr, "SMBus bridge not found?!\n"); + return -1; + } + base = pci_read_long(dev,0x60) & 0xFF00; + if(base < 0x400) { + fprintf(stderr, "bogus I/O base %04x\n", base); + return -1; + } + tmp = INW(base+2); + tmp &= 0xFEFF; + OUTW(tmp, base+2); + + return nvidia_mcp_gpio_set(0x05, 1); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1437,6 +1479,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, board_hp_xw9400}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, -- 1.7.1

1 0

[PATCH] Add hp xw9400 board enable.
by Michael Karcher 30 May '10

30 May '10

Now makes sure to pick the right SMBus bridge. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++------- 1 files changed, 51 insertions(+), 8 deletions(-) diff --git a/board_enable.c b/board_enable.c index b5eb63f..f77ab41 100644 --- a/board_enable.c +++ b/board_enable.c @@ -552,6 +552,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) { struct pci_dev *dev; uint16_t base; + uint16_t devclass; uint8_t tmp; if ((gpio < 0) || (gpio >= 0x40)) { @@ -566,17 +567,33 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) case 0x0050: /* MCP04 */ case 0x0060: /* MCP2 */ break; - default: - /* Newer MCPs use the SMBus Controller */ - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); - switch (dev->device_id) { - case 0x0264: /* MCP51 */ + case 0x0260: /* MCP51 */ + case 0x0364: /* MCP55 */ + /* find SMBus controller on *this* southbridge */ + /* The infamous Tyan S2915-E has two south bridges; they are + easily told apart from each other by the class of the + LPC bridge, but have the same SMBus bridge IDs */ + if (dev->func != 0) { + msg_perr("MCP LCP bridge at unexpected function" + " number %d\n", dev->func); + return -1; + } + + dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1); + if (!dev) { + msg_perr("MCP SMBus controller could not be found\n"); + return -1; + } + devclass = pci_read_word(dev, 0x0a); + if (devclass != 0x0C05) { + msg_perr("Unexpected device class %04x for SMBus" + " controller\n", devclass); + return -1; + } break; - default: + default: msg_perr("\nERROR: no NVIDIA LPC/SMBus controller found.\n"); return -1; - } - break; } base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ @@ -651,6 +668,31 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for HP xw9400 (Tyan S2915-E OEM): nVidia MCP55. + */ +static int board_hp_xw9400(const char *name) +{ + struct pci_dev * dev; + uint16_t base; + uint16_t tmp; + dev = pci_dev_get(0, 0, 1, 1); /* UGLY HACK! */ + if(!dev) { + fprintf(stderr, "SMBus bridge not found?!\n"); + return -1; + } + base = pci_read_long(dev,0x60) & 0xFF00; + if(base < 0x400) { + fprintf(stderr, "bogus I/O base %04x\n", base); + return -1; + } + tmp = INW(base+2); + tmp &= 0xFEFF; + OUTW(tmp, base+2); + + return nvidia_mcp_gpio_set(0x05, 1); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1437,6 +1479,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, board_hp_xw9400}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, -- 1.7.1

1 0

[PATCH] Add hp xw9400 board enable.
by Michael Karcher 30 May '10

30 May '10

Third try... Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 27 +++++++++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index b5eb63f..270f713 100644 --- a/board_enable.c +++ b/board_enable.c @@ -571,6 +571,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); switch (dev->device_id) { case 0x0264: /* MCP51 */ + case 0x0364: /* MCP55 */ break; default: msg_perr("\nERROR: no NVIDIA LPC/SMBus controller found.\n"); @@ -651,6 +652,31 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for HP xw9400 (Tyan S2915-E OEM): nVidia MCP55. + */ +static int board_hp_xw9400(const char *name) +{ + struct pci_dev * dev; + uint16_t base; + uint16_t tmp; + dev = pci_dev_find(0x10de,0x0364); + if(!dev) { + fprintf(stderr, "SMBus bridge not found?!\n"); + return -1; + } + base = pci_read_long(dev,0x60) & 0xFF00; + if(base < 0x400) { + fprintf(stderr, "bogus I/O base %04x\n", base); + return -1; + } + tmp = INW(base+2); + tmp &= 0xFEFF; + OUTW(tmp, base+2); + + return nvidia_mcp_gpio_set(0x05, 1); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1437,6 +1463,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, board_hp_xw9400}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, -- 1.7.1

1 0

[PATCH] Add hp xw9400 board enable.
by Michael Karcher 30 May '10

30 May '10

Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index b5eb63f..a67f0b9 100644 --- a/board_enable.c +++ b/board_enable.c @@ -571,6 +571,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); switch (dev->device_id) { case 0x0264: /* MCP51 */ + case 0x0364: /* MCP55 */ break; default: msg_perr("\nERROR: no NVIDIA LPC/SMBus controller found.\n"); @@ -619,6 +620,14 @@ static int nvidia_mcp_gpio2_raise(const char *name) } /** + * Suited for HP xw9400 (Tyan S2915-E OEM): nVidia MCP55. + */ +static int nvidia_mcp_gpio5_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x05, 1); +} + +/** * Suited for Abit NF7-S: NVIDIA CK804. */ static int nvidia_mcp_gpio8_raise(const char *name) @@ -1437,6 +1446,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, OK, board_hp_dl145_g3_enable}, {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, + {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, nvidia_mcp_gpio5_raise}, {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, -- 1.7.1

1 0

Re: [flashrom] [PATCH] experimental patch for HP branded Tyan S2915
by Carl-Daniel Hailfinger 30 May '10

30 May '10

Hi, On 28.01.2010 16:36, Michael Karcher wrote: > This patch may or may not help the HP xw9400 workstation [...] > > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> > Turns out that this patch was not needed for flash detection, but it may be needed as board enable for writing. Besides that, it allows MCP55 GPIO access which we need anyway. > diff --git a/board_enable.c b/board_enable.c > index 2c836a9..6970be2 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -478,6 +478,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) > dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); > switch (dev->device_id) { > case 0x0264: /* MCP51 */ > + case 0x0364: /* MCP55 */ > break; > default: > fprintf(stderr, > @@ -513,6 +514,26 @@ static int nvidia_mcp_gpio2_raise(const char *name) > */ > static int nvidia_mcp_gpio5_raise(const char *name) > { > + /* experimental stuff - maybe it helps the hidden flash > + chip problem on Tyan S2915-E */ > + struct pci_dev * dev; > + uint16_t base; > + uint16_t tmp; > + dev = pci_dev_find(0x10de,0x0364); > + if(!dev) { > + fprintf(stderr, "SMBus bridge not found?!\n"); > + return -1; > + } > + base = pci_read_long(dev,0x60) & 0xFF00; > + if(base < 0x400) { > + fprintf(stderr, "bogus I/O base %04x\n", base); > + return -1; > + } > + tmp = INW(base+2); > + tmp &= 0xFEFF; > + OUTW(tmp, base+2); > + > + /* Obvious stuff for the HP variant */ > return nvidia_mcp_gpio_set(0x05, 1); > } > > Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[RFC] Making flashrom standalone on Yeeloong
by Vladimir 'φ-coder/phcoder' Serbinenko 29 May '10

29 May '10

Hello, all. As a side projetc I wanted to make flashrom loadable using multiboot2 protocol on yeeloong. In this case multiboot2-compliant loader will already put the necessary files in memory so no FS code is required. Major changes: Remove OS includes, disable few secondary files, write standalone analoga for standard functions, write initialisations, use passed buffers instead of files and the most intrusive change is switch to static allocation. The patch still doesn't compile, I posting it here only for idea gathering -- Regards Vladimir 'φ-coder/phcoder' Serbinenko

1 0

Re: [flashrom] External programmers
by Mark Morschhäuser 29 May '10

29 May '10

> 2. All those Willem/Sivava variants. People regularly request those, but > I don't think anyone in here owns the hardware. I bought the "Willem True USB Universal Programmer V2" with LPC/FWH adapter and would try to help out. I installed the software in virtualbox and e.g. could monitor the USB port when I am using the programmer. btw, everyone in the net seems to ask for the latest software... it can be downloaded from http://www.mcumall.com/comersus/store/mcumall_download.asp Greetings, Mark

1 0

Part ASD 29F2008
by Néstor a.k.a. DarkMan 29 May '10

29 May '10

Hi, I tried an ASD 29F2008 part and is recognized as a Winbond W29C020C. It fails at erase operation. How can I help to support the device? Motherboard: Shuttle AV11V30 Processor: Pentium III Chipset: Via Apollo Pro 133 Software version: flashrom v0.9.2-r1017 on Linux 2.6.24-27-generic (i686), built with libpci 2.2.4, GCC 4.2.4 (Ubuntu 4.2.4-1ubuntu4), little endian Greetings. _________________________________________________________________ Consejos para seducir ¿Puedes conocer gente nueva a través de Internet? ¡Regístrate ya! http://contactos.es.msn.com/?mtcmk=015352

2 2

curious about nicrealtek
by Kyle Kienapfel 28 May '10

28 May '10

Is probing the flash/eeprom something thats not done yet for rtl8139's? root@grayskull:~# flashrom -p nicrealtek flashrom v0.9.2-r1015 on Linux 2.6.17 (i686), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 02:0a.0). No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. I ran an strace on flashrom and just before it says theres no flash device it reads /sys/bus/pci/devices/0000\:02\:0a.0/config is this the contents of the eeprom where the bootrom size is configured? forcing a read works flashrom -p nicrealtek -f -r file -c SST29EE010

4 8

[PATCH] Support 2-byte SPI RES command
by Carl-Daniel Hailfinger 28 May '10

28 May '10

Some chips implement the RES (0xab) opcode, but they use a non-standard two byte response instead of the usual one byte response. A two-byte response has the accuracy of REMS and RDID, so don't check for REMS/RDID availability before running a two-byte RES. Side note: The one-byte RES will fail on wbsio, but it did that in old versions as well. This needs to be fixed in wbsio. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-spi_2byte_res/spi25.c =================================================================== --- flashrom-spi_2byte_res/spi25.c (Revision 1016) +++ flashrom-spi_2byte_res/spi25.c (Arbeitskopie) @@ -67,20 +67,20 @@ return 0; } -static int spi_res(unsigned char *readarr) +static int spi_res(unsigned char *readarr, int bytes) { unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; uint32_t readaddr; int ret; - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); if (ret == SPI_INVALID_ADDRESS) { /* Find the lowest even address allowed for reads. */ readaddr = (spi_get_valid_read_addr() + 1) & ~1; cmd[1] = (readaddr >> 16) & 0xff, cmd[2] = (readaddr >> 8) & 0xff, cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); } if (ret) return ret; @@ -235,13 +235,15 @@ return 0; } -int probe_spi_res(struct flashchip *flash) +int probe_spi_res1(struct flashchip *flash) { unsigned char readarr[3]; uint32_t id2; const unsigned char allff[] = {0xff, 0xff, 0xff}; const unsigned char all00[] = {0x00, 0x00, 0x00}; + /* We only want one-byte RES if RDID and REMS are unusable. */ + /* Check if RDID is usable and does not return 0xff 0xff 0xff or * 0x00 0x00 0x00. In that case, RES is pointless. */ @@ -259,12 +261,13 @@ return 0; } - if (spi_res(readarr)) + if (spi_res(readarr, 1)) return 0; - /* FIXME: Handle the case where RES gives a 2-byte response. */ id2 = readarr[0]; + msg_cdbg("%s: id 0x%x\n", __func__, id2); + if (id2 != flash->model_id) return 0; @@ -275,6 +278,29 @@ return 1; } +int probe_spi_res2(struct flashchip *flash) +{ + unsigned char readarr[2]; + uint32_t id1, id2; + + if (spi_res(readarr, 2)) + return 0; + + id1 = readarr[0]; + id2 = readarr[1]; + + msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); + + if (id1 != flash->manufacture_id || id2 != flash->model_id) + return 0; + + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + return 1; +} + uint8_t spi_read_status_register(void) { const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR }; Index: flashrom-spi_2byte_res/flashchips.c =================================================================== --- flashrom-spi_2byte_res/flashchips.c (Revision 1016) +++ flashrom-spi_2byte_res/flashchips.c (Arbeitskopie) @@ -4665,19 +4665,19 @@ /* The ST M25P05 is a bit of a problem. It has the same ID as the * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res + * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 * only is successful if RDID does not work. */ { .vendor = "ST", .name = "M25P05.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4723,12 +4723,12 @@ .vendor = "ST", .name = "M25P10.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4798,12 +4798,12 @@ .vendor = "ST", .name = "M25P40-old", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { Index: flashrom-spi_2byte_res/spi.h =================================================================== --- flashrom-spi_2byte_res/spi.h (Revision 1016) +++ flashrom-spi_2byte_res/spi.h (Arbeitskopie) @@ -27,6 +27,7 @@ /* Read Electronic ID */ #define JEDEC_RDID 0x9f #define JEDEC_RDID_OUTSIZE 0x01 +/* INSIZE may be 0x04 for some chips*/ #define JEDEC_RDID_INSIZE 0x03 /* AT25F512A has bit 3 as don't care bit in commands */ @@ -42,6 +43,7 @@ /* Read Electronic Signature */ #define JEDEC_RES 0xab #define JEDEC_RES_OUTSIZE 0x04 +/* INSIZE may be 0x02 for some chips*/ #define JEDEC_RES_INSIZE 0x01 /* Write Enable */ Index: flashrom-spi_2byte_res/chipdrivers.h =================================================================== --- flashrom-spi_2byte_res/chipdrivers.h (Revision 1016) +++ flashrom-spi_2byte_res/chipdrivers.h (Arbeitskopie) @@ -29,7 +29,8 @@ int probe_spi_rdid(struct flashchip *flash); int probe_spi_rdid4(struct flashchip *flash); int probe_spi_rems(struct flashchip *flash); -int probe_spi_res(struct flashchip *flash); +int probe_spi_res1(struct flashchip *flash); +int probe_spi_res2(struct flashchip *flash); int spi_write_enable(void); int spi_write_disable(void); int spi_chip_erase_60(struct flashchip *flash); -- http://www.hailfinger.org/

2 2

[commit] r1017 - trunk
by repository service 28 May '10

28 May '10

Author: hailfinger Date: Fri May 28 19:07:57 2010 New Revision: 1017 URL: http://flashrom.org/trac/coreboot/changeset/1017 Log: Some chips implement the RES (0xab) opcode, but they use a non-standard two byte response instead of the usual one byte response. A two-byte response has the accuracy of REMS and RDID, so don't check for REMS/RDID availability before running a two-byte RES. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/spi.h trunk/spi25.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Fri May 28 17:53:08 2010 (r1016) +++ trunk/chipdrivers.h Fri May 28 19:07:57 2010 (r1017) @@ -29,7 +29,8 @@ int probe_spi_rdid(struct flashchip *flash); int probe_spi_rdid4(struct flashchip *flash); int probe_spi_rems(struct flashchip *flash); -int probe_spi_res(struct flashchip *flash); +int probe_spi_res1(struct flashchip *flash); +int probe_spi_res2(struct flashchip *flash); int spi_write_enable(void); int spi_write_disable(void); int spi_chip_erase_60(struct flashchip *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri May 28 17:53:08 2010 (r1016) +++ trunk/flashchips.c Fri May 28 19:07:57 2010 (r1017) @@ -4665,19 +4665,19 @@ /* The ST M25P05 is a bit of a problem. It has the same ID as the * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res + * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 * only is successful if RDID does not work. */ { .vendor = "ST", .name = "M25P05.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4723,12 +4723,12 @@ .vendor = "ST", .name = "M25P10.RES", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -4798,12 +4798,12 @@ .vendor = "ST", .name = "M25P40-old", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = ST_ID, + .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, - .probe = probe_spi_res, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { Modified: trunk/spi.h ============================================================================== --- trunk/spi.h Fri May 28 17:53:08 2010 (r1016) +++ trunk/spi.h Fri May 28 19:07:57 2010 (r1017) @@ -27,6 +27,7 @@ /* Read Electronic ID */ #define JEDEC_RDID 0x9f #define JEDEC_RDID_OUTSIZE 0x01 +/* INSIZE may be 0x04 for some chips*/ #define JEDEC_RDID_INSIZE 0x03 /* AT25F512A has bit 3 as don't care bit in commands */ @@ -42,6 +43,7 @@ /* Read Electronic Signature */ #define JEDEC_RES 0xab #define JEDEC_RES_OUTSIZE 0x04 +/* INSIZE may be 0x02 for some chips*/ #define JEDEC_RES_INSIZE 0x01 /* Write Enable */ Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Fri May 28 17:53:08 2010 (r1016) +++ trunk/spi25.c Fri May 28 19:07:57 2010 (r1017) @@ -67,20 +67,20 @@ return 0; } -static int spi_res(unsigned char *readarr) +static int spi_res(unsigned char *readarr, int bytes) { unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; uint32_t readaddr; int ret; - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); if (ret == SPI_INVALID_ADDRESS) { /* Find the lowest even address allowed for reads. */ readaddr = (spi_get_valid_read_addr() + 1) & ~1; cmd[1] = (readaddr >> 16) & 0xff, cmd[2] = (readaddr >> 8) & 0xff, cmd[3] = (readaddr >> 0) & 0xff, - ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); } if (ret) return ret; @@ -235,13 +235,15 @@ return 0; } -int probe_spi_res(struct flashchip *flash) +int probe_spi_res1(struct flashchip *flash) { unsigned char readarr[3]; uint32_t id2; const unsigned char allff[] = {0xff, 0xff, 0xff}; const unsigned char all00[] = {0x00, 0x00, 0x00}; + /* We only want one-byte RES if RDID and REMS are unusable. */ + /* Check if RDID is usable and does not return 0xff 0xff 0xff or * 0x00 0x00 0x00. In that case, RES is pointless. */ @@ -259,16 +261,40 @@ return 0; } - if (spi_res(readarr)) + if (spi_res(readarr, 1)) return 0; - /* FIXME: Handle the case where RES gives a 2-byte response. */ id2 = readarr[0]; + msg_cdbg("%s: id 0x%x\n", __func__, id2); + if (id2 != flash->model_id) return 0; /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + return 1; +} + +int probe_spi_res2(struct flashchip *flash) +{ + unsigned char readarr[2]; + uint32_t id1, id2; + + if (spi_res(readarr, 2)) + return 0; + + id1 = readarr[0]; + id2 = readarr[1]; + + msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); + + if (id1 != flash->manufacture_id || id2 != flash->model_id) + return 0; + + /* Print the status register to tell the * user about possible write protection. */ spi_prettyprint_status_register(flash);

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom