- flashrom - mail.coreboot.org

tested boardenable/flashing on iBase:MB899
by Bernhard M. Wiedemann 08 Aug '10

08 Aug '10

# flashrom -p internal:boardenable=force -m iBASE:MB899 -w coreboot.rom flashrom v0.9.1-runknown on Linux 2.6.18-skas3-v9-pre9-default (i686), built with libpci 2.2.4-pre4, GCC 3.4.6 (Debian 3.4.6-5) No coreboot table found. Found chipset "Intel ICH7M", enabling flash write... OK. This chipset supports the following protocols: FWH. NOTE: Running an untested board enable procedure. Please report success/failure to flashrom(a)flashrom.org. Disabling flash write protection for board "iBASE MB899"... Intel ICH LPC Bridge: Raising GPIO26. OK. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Writing flash chip... Erasing flash chip... SUCCESS. Programming page: DONE!ss: 0x0007f000 COMPLETE. Verifying flash... VERIFIED. -- Bernhard M. Wiedemann software engineer

2 1

flashing BIOS using flashrom on ASUS M2N-SLI DELUXE
by Kasper M. Nielsen 08 Aug '10

08 Aug '10

hi I don't know is you still need info on this type of motherboard but here are the logs from my successful attempt to flash my BIOS with you software Kasper M. Nielsen

3 2

Asus M2N32-SLI DELUXE (Nvidia MCP55) / ST M50FLW080A
by Mattias Mattsson 08 Aug '10

08 Aug '10

Hi, As reported earlier by Vincent Pelletier: http://www.flashrom.org/pipermail/flashrom/2010-June/003410.html Probe and read works for this board and flash chip. I can confirm that erase and write also work. Tested with flashrom r1099. Logs attached. Thanks! -mattias

2 1

Asus P2E-M / Winbond W29EE011
by Mattias Mattsson 08 Aug '10

08 Aug '10

Hi, I've tested flashrom r1091 on an Asus P2E-M mainboard equipped with a Winbond W29EE011 flash chips. Probe/read/erase/write works. All flashrom commands run with the "-c W29EE011" option. Logs attached. Thanks -mattias

2 1

[commit] r1133 - trunk
by repository service 08 Aug '10

08 Aug '10

Author: uwe Date: Sun Aug 8 18:05:23 2010 New Revision: 1133 URL: http://flashrom.org/trac/coreboot/changeset/1133 Log: Add a board-enable for the ASRock 775i65G. This was successfully tested by 'kai2343' on IRC. Thanks to Michael Karcher for finding the board enable. Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 8 17:52:07 2010 (r1132) +++ trunk/board_enable.c Sun Aug 8 18:05:23 2010 (r1133) @@ -1326,6 +1326,7 @@ * Suited for: * - Dell PowerEdge 1850: Intel PPGA604 + E7520 + ICH5R. * - ASRock P4i65GV: Intel Socket478 + 865GV + ICH5R. + * - ASRock 775i65G: Intel LGA 775 + 865G + ICH5. */ static int intel_ich_gpio23_raise(void) { @@ -1712,6 +1713,7 @@ {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", "Artec Group", "DBE61", 0, OK, board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, + {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Sun Aug 8 17:52:07 2010 (r1132) +++ trunk/print.c Sun Aug 8 18:05:23 2010 (r1133) @@ -295,6 +295,7 @@ B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL), B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL), B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), + B("ASRock", "775i65G", 1, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL), B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M&s=939", NULL), B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b", NULL), B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),

1 0

[commit] r1132 - trunk
by repository service 08 Aug '10

08 Aug '10

Author: uwe Date: Sun Aug 8 17:52:07 2010 New Revision: 1132 URL: http://flashrom.org/trac/coreboot/changeset/1132 Log: Mark the following boards/chips as tested (trivial). Boards: - ASUS M4A785TD-M EVO (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004283.html - ASUS M2N32-SLI Deluxe (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004287.html - ASUS P2E-M (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-July/004261.html - ASUS M2N-SLI Deluxe (reported by Kasper M. Nielsen <kasper.nielsen85(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-May/003015.html - iBASE MB899 (reported by Bernhard M. Wiedemann <bernhard(a)lsmod.de>) http://www.flashrom.org/pipermail/flashrom/2010-April/002953.html Board-enable is now marked as tested. - ASRock 939A785GMH/128M (reported by Lennart Sauerbeck <lists(a)lennart.sauerbeck.org>) http://www.flashrom.org/pipermail/flashrom/2010-August/004340.html Chips: - ST M50FLW080A (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004287.html - Winbond W29EE011 (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-July/004261.html - SST SST49LF040 (reported by Mattias Mattsson <vitplister(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004296.html Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/flashchips.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sat Aug 7 23:49:11 2010 (r1131) +++ trunk/board_enable.c Sun Aug 8 17:52:07 2010 (r1132) @@ -1746,7 +1746,7 @@ {0x8086, 0x2415, 0x103c, 0x1249, 0x10b7, 0x9200, 0x103c, 0x1246, NULL, NULL, NULL, "HP", "Vectra VL400", 0, OK, board_hp_vl400}, {0x8086, 0x1a30, 0x103c, 0x1a30, 0x8086, 0x2443, 0x103c, 0x2440, "^VL420$", NULL, NULL, "HP", "VL420 SFF", 0, OK, intel_ich_gpio22_raise}, {0x10de, 0x0369, 0x103c, 0x12fe, 0x10de, 0x0364, 0x103c, 0x12fe, NULL, NULL, NULL, "HP", "xw9400", 0, OK, nvidia_mcp_gpio5_raise}, - {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, NT, intel_ich_gpio26_raise}, + {0x8086, 0x27A0, 0, 0, 0x8086, 0x27B9, 0, 0, NULL, "ibase", "mb899", "iBASE", "MB899", 0, OK, intel_ich_gpio26_raise}, {0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, OK, board_ibm_x3455}, {0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, OK, wbsio_check_for_spi}, {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^SE440BX-2$", NULL, NULL, "Intel", "SE440BX-2", 0, NT, intel_piix4_gpo27_lower}, Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Aug 7 23:49:11 2010 (r1131) +++ trunk/flashchips.c Sun Aug 8 17:52:07 2010 (r1132) @@ -5623,7 +5623,7 @@ .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -6356,7 +6356,7 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = @@ -7272,7 +7272,7 @@ .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_w29ee011, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w29ee011.c) */ .block_erasers = Modified: trunk/print.c ============================================================================== --- trunk/print.c Sat Aug 7 23:49:11 2010 (r1131) +++ trunk/print.c Sun Aug 8 17:52:07 2010 (r1132) @@ -295,12 +295,13 @@ B("Artec Group","DBE61", 1, "http://wiki.thincan.org/DBE61", NULL), B("Artec Group","DBE62", 1, "http://wiki.thincan.org/DBE62", NULL), B("ASI", "MB-5BLMP", 1, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."), + B("ASRock", "939A785GMH/128M", 1, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M&s=939", NULL), B("ASRock", "A770CrossFire", 1, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b", NULL), B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=", NULL), B("ASRock", "K8S8X", 1, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", "The Super I/O isn't found on this board. See http://www.flashrom.org/pipermail/flashrom/2009-November/000937.html."), - B("ASRock", "P4i65GV", 1, NULL, NULL), B("ASRock", "M3A790GXH/128M", 1, "http://www.asrock.com/MB/overview.asp?Model=M3A790GXH/128M", NULL), + B("ASRock", "P4i65GV", 1, NULL, NULL), B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), @@ -323,12 +324,15 @@ B("ASUS", "K8V-X SE", 1, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL), B("ASUS", "M2A-MX", 1, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL), B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html."), + B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=0jMy2X8lKstYRvev", NULL), B("ASUS", "M2N-E", 1, "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=szSFtrap7crpBaQE", NULL), B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF", NULL), B("ASUS", "M2V", 1, "http://www.asus.com/product.aspx?P_ID=OqYlEDFfF6ZqZGvp", NULL), B("ASUS", "M2V-MX", 1, "http://www.asus.com/product.aspx?P_ID=7grf8Ci4yxnqzt3z", NULL), B("ASUS", "M3A76-CM", 1, NULL, NULL), B("ASUS", "M3A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL), + B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/product.aspx?P_ID=QHbvGVB1mXmmD8qQ", NULL), B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", NULL), @@ -337,6 +341,7 @@ B("ASUS", "P2B-D", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), B("ASUS", "P2B-DS", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL), B("ASUS", "P2B-F", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL), + B("ASUS", "P2E-M", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL), B("ASUS", "P2L97-S", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL), B("ASUS", "P3B-F", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", NULL), B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),

1 0

Board Report for MSI MS-6577 ver 2.1
by Putlinuxonit 07 Aug '10

07 Aug '10

Hi, Just posting logs for an MSI MS-6577 version 2.1 motherboard from an HP Paviliion a145.uk. bios download page: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&… Udu Ogah

3 3

[commit] r1131 - trunk
by repository service 07 Aug '10

07 Aug '10

Author: mkarcher Date: Sat Aug 7 23:49:11 2010 New Revision: 1131 URL: http://flashrom.org/trac/coreboot/changeset/1131 Log: Board enable for MSI MS-6577 Thanks to "Putlinuxonit" <putlinuxonit(a)gmail.com> for reporting and testing. lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004309.html Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Aug 2 10:29:34 2010 (r1130) +++ trunk/board_enable.c Sat Aug 7 23:49:11 2010 (r1131) @@ -319,6 +319,17 @@ } /** + * Winbond W83627HF: Raise GPIO25. + * + * Suited for: + * - MSI MS-6577 + */ +static int w83627hf_gpio25_raise_2e() +{ + return winbond_gpio_set(0x2e, WINBOND_W83627HF_ID, 25, 1); +} + +/** * Winbond W83627EHF: Raise GPIO24. * * Suited for: @@ -1743,6 +1754,7 @@ {0x8086, 0x27A0, 0x8086, 0x27a0, 0x8086, 0x27b8, 0x8086, 0x27b8, NULL, "kontron", "986lcd-m", "Kontron", "986LCD-M", 0, OK, board_kontron_986lcd_m}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, "Mitac", "6513WU", 0, OK, board_mitac_6513wu}, {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, + {0x8086, 0x2560, 0x1462, 0x5770, 0x8086, 0x2562, 0x1462, 0x5778, NULL, NULL, NULL, "MSI", "MS-6577", 0, OK, w83627hf_gpio25_raise_2e}, {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)", 0, OK, board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio44_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v},

1 0

M4A79T partially compatible
by Michael Cole 07 Aug '10

07 Aug '10

Hi, thanks for the great tool. Just wanted to let you know that the ASUS m4A79T was compatible. When rebooting there was an error "Asus Express Gate - Installation Failed blah". Flashing again with the BIOS setup flasher made it go away. It's not something I'm that interested in anyways: http://www.brighthub.com/computing/hardware/articles/30617.aspx Thanks again, Mike root@mc-desktop:/home/michael# flashrom -w M4A79T-Deluxe-3205.ROM flashrom v0.9.1-r946 No coreboot table found. Found ITE Super I/O, id 8720 Found chipset "AMD SB700/SB710/SB750", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... SUCCESS. done. Programming flash done. COMPLETE. Verifying flash... VERIFIED. root@mc-desktop:/home/michael# ===================================== root@mc-desktop:/home/michael# flashrom -Vr flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M4A79T Deluxe" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8720 Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 811M loops per second, 100 myus = 202 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xef 0x30 0x14 0x00. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 KB: RDID returned 0xef 0x30 0x14 0x00. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25D16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xf4, id2 0x32 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF016B, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x97, id2 0x9b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xf4, id2 0x32 Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 KB: RDID returned 0xef 0x30 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xf4, id2 0x32 Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xf4, id2 0x32 Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xf4, id2 0x32 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x20, 256 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x40, 512 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x80, 1024 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25x16, 2048 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x32, 4096 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x64, 8192 KB: RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf4, id2 0x32, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xef 0x30 0x14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Error: No filename specified. root@mc-desktop:/home/michael#

2 2

Re: [flashrom] Speedup SST 25VF032B and 25VF064C programming
by Wagner, Helge (GE Intelligent Platforms) 06 Aug '10

06 Aug '10

Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> Speedup for new 25VF032B programming algorithm: from 3091 [sic!] to 123 seconds -----Original Message----- From: flashrom-bounces(a)flashrom.org [mailto:flashrom-bounces@flashrom.org] On Behalf Of Wagner, Helge (GE Intelligent Platforms) Sent: Freitag, 6. August 2010 15:28 To: flashrom(a)flashrom.org Subject: [flashrom] Speedup SST 25VF032B and 25VF064C programming I have tested both SST 25VF032B and SST 25VF064C on a QM57 (IbexPeak) system and found that the reprogramming of these chips is very slow. So i have changed the programming engine for the 25VF064C from "spi_chip_write_1" to "spi_chip_write_256". I have tested the 25VF064C with the new engine and it works fine. For the 25VF032B i have changed the programming engine from "spi_chip_write_1" to "spi_aai_write". I have tested this engine, too, and found it working (speedup was from 228 to 113 seconds). While testing i found that some commands needed by some of the algorithms are not in the OPCODE table. So i have implemented the on-the-fly reprogramming of the OPCODE table (in the ICH engine).

1 0

Re: [flashrom] Blank check
by Carl-Daniel Hailfinger 06 Aug '10

06 Aug '10

Hi Helge, On 06.08.2010 15:29, Wagner, Helge (GE Intelligent Platforms) wrote: > I am not sure if this was discussed before, but i would suggest to skip > programming blocks/areas which should be programmed to the erased state. > E.g. if half of the input file consists of 0xFF areas, we could half the > programming time. > > And on chips where read is much faster than erase (e.g. SST 25VF...) we > can speed up erasing if we do a read before erase and only erase that > blocks that are not already in the erased state. > Fully agreed. In fact, I am working on a patch which will do exactly that. Right now the whole flashrom infrastructure is oriented to erase-in-bulk/write-in-bulk, but over the last few weeks a few patches have been merged which will allow us to perform partial writes and partial erases on an as-needed basis. Two patches for this sort of operation are still unmerged because we want to release the current well-tested state of flashrom as 0.9.3 first, and then change the internal interfaces in one go and give the codebase a few weeks to stabilize. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

Blank check
by Wagner, Helge (GE Intelligent Platforms) 06 Aug '10

06 Aug '10

I am not sure if this was discussed before, but i would suggest to skip programming blocks/areas which should be programmed to the erased state. E.g. if half of the input file consists of 0xFF areas, we could half the programming time. And on chips where read is much faster than erase (e.g. SST 25VF...) we can speed up erasing if we do a read before erase and only erase that blocks that are not already in the erased state. Regards, Helge

1 0

Speedup SST 25VF032B and 25VF064C programming
by Wagner, Helge (GE Intelligent Platforms) 06 Aug '10

06 Aug '10

I have tested both SST 25VF032B and SST 25VF064C on a QM57 (IbexPeak) system and found that the reprogramming of these chips is very slow. So i have changed the programming engine for the 25VF064C from "spi_chip_write_1" to "spi_chip_write_256". I have tested the 25VF064C with the new engine and it works fine. For the 25VF032B i have changed the programming engine from "spi_chip_write_1" to "spi_aai_write". I have tested this engine, too, and found it working (speedup was from 228 to 113 seconds). While testing i found that some commands needed by some of the algorithms are not in the OPCODE table. So i have implemented the on-the-fly reprogramming of the OPCODE table (in the ICH engine).

1 0

Re: [flashrom] New Intel Chipsets
by Carl-Daniel Hailfinger 06 Aug '10

06 Aug '10

Hi Helge, On 05.08.2010 16:43, Wagner, Helge (GE Intelligent Platforms) wrote: > I have added support for some new intel chipsets. > Thanks for your patch! > (At least) for the QM57 which i have tested an additional patch was > needed as some reserved bits in the "Software Sequencing Flash Control > Register" (SSFC) needs to be programmed to 1 in the QM57. > Ouch! Do you see a hang without that part of the patch? We've been chasing a hang on some ICH10 family boards, and your patch may actually fix it. I noticed that you keep the reserved bits as is, but should we set them to 1 instead even if they are not set? > Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> > Looks good, but it seems your mailer mangled the patch (inserted linebreaks). Could you please resend it as attachment? > diff -urN flashrom-0.9.2/chipset_enable.c flashrom/chipset_enable.c > --- flashrom-0.9.2/chipset_enable.c 2010-08-01 01:16:09.000000000 > +0200 > +++ flashrom/chipset_enable.c 2010-08-05 13:28:29.000000000 +0200 > @@ -1011,7 +1011,21 @@ > {0x1166, 0x0205, OK, "Broadcom", "HT-1000", > enable_flash_ht1000}, > {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", > enable_flash_ich10}, > {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", > enable_flash_ich10}, > + {0x8086, 0x3b02, NT, "Intel", "P55", > enable_flash_ich10}, > + {0x8086, 0x3b03, NT, "Intel", "PM55", > enable_flash_ich10}, > + {0x8086, 0x3b06, NT, "Intel", "H55", > enable_flash_ich10}, > + {0x8086, 0x3b07, OK, "Intel", "QM57", > enable_flash_ich10}, > + {0x8086, 0x3b08, NT, "Intel", "H57", > enable_flash_ich10}, > + {0x8086, 0x3b09, NT, "Intel", "HM55", > enable_flash_ich10}, > + {0x8086, 0x3b0a, NT, "Intel", "Q57", > enable_flash_ich10}, > + {0x8086, 0x3b0b, NT, "Intel", "HM57", > enable_flash_ich10}, > {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", > enable_flash_ich10}, > + {0x8086, 0x3b0e, NT, "Intel", "B55", > enable_flash_ich10}, > + {0x8086, 0x3b0f, NT, "Intel", "QS57", > enable_flash_ich10}, > + {0x8086, 0x3b12, NT, "Intel", "3400", > enable_flash_ich10}, > + {0x8086, 0x3b14, NT, "Intel", "3420", > enable_flash_ich10}, > + {0x8086, 0x3b16, NT, "Intel", "3450", > enable_flash_ich10}, > + {0x8086, 0x3b1e, NT, "Intel", "B55", > enable_flash_ich10}, > {0x8086, 0x7198, OK, "Intel", "440MX", > enable_flash_piix4}, > {0x8086, 0x25a1, OK, "Intel", "6300ESB", > enable_flash_ich_4e}, > {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", > enable_flash_ich_dc}, > diff -urN flashrom-0.9.2/ichspi.c flashrom/ichspi.c > --- flashrom-0.9.2/ichspi.c 2010-07-28 00:41:39.000000000 +0200 > +++ flashrom/ichspi.c 2010-08-05 13:30:32.000000000 +0200 > @@ -560,7 +560,9 @@ > } > > /* Assemble SSFS + SSFC */ > - temp32 = 0; > + /* keep reserved bits (23-19,7,0) */ > + temp32 = REGREAD32(ICH9_REG_SSFS); > + temp32 &= 0xF8008100; > > /* clear error status registers */ > temp32 |= (SSFS_CDS + SSFS_FCERR); > Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Success Report for MSI MS-6577 ver 2.1
by Putlinuxonit 06 Aug '10

06 Aug '10

Hi, just reporting that the board enable recently submitted for the aforementioned motherboard works ok. successfully upgraded bios in a HP a145.uk(ms-6577 v2.1) to version 3.25 with flashrom 0.9.2 r1130. See logs below: flashrom-0.9.2-r1130$ sudo ./flashrom -p internal:boardenable=force -Vw ../../325.rom flashrom v0.9.2-r1130 on Linux 2.6.31-22-generic (i686), built with libpci 3.0.0, GCC 4.4.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1804M loops per second, 10 myus = 10 us, 100 myus = 97 us, 1000 myus = 967 us, 10000 myus = 9864 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "PPPPPP-ABA MMMMM" DMI string system-version: " " DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-6577" DMI string baseboard-version: "030" DMI string chassis-type: "Desktop" Found chipset "Intel ICH4/ICH4-L", enabling flash write... chipset PCI ID is 8086:24c0, BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: FWH. NOTE: Running an untested board enable procedure. Please report success/failure to flashrom(a)flashrom.org. Disabling flash write protection for board "MSI MS-6577"... OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x7e, id2 0xc6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xda, id2 0x34 Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xda, id2 0x34 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x34 Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x34 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, SUCCESS. Programming page: DONE!ss: 0x0007f000 COMPLETE. Verifying flash... VERIFIED. Thanks to roysjosh for the great work! Tested-by: Udu Ogah <putlinuxonit(a)gmail.com>

1 0

Re: [flashrom] New Intel Chipsets
by Idwer Vollering 05 Aug '10

05 Aug '10

2010/8/5 Wagner, Helge (GE Intelligent Platforms) <Helge.Wagner(a)ge.com> > I have added support for some new intel chipsets. > If only we could have saved you from doing this twice: http://www.flashrom.org/pipermail/flashrom/2010-April/thread.html#2896 http://patchwork.coreboot.org/patch/1208/ > > (At least) for the QM57 which i have tested an additional patch was > needed as some reserved bits in the "Software Sequencing Flash Control > Register" (SSFC) needs to be programmed to 1 in the QM57. > > Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> > > diff -urN flashrom-0.9.2/chipset_enable.c flashrom/chipset_enable.c > --- flashrom-0.9.2/chipset_enable.c 2010-08-01 01:16:09.000000000 > +0200 > +++ flashrom/chipset_enable.c 2010-08-05 13:28:29.000000000 +0200 > @@ -1011,7 +1011,21 @@ > {0x1166, 0x0205, OK, "Broadcom", "HT-1000", > enable_flash_ht1000}, > {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", > enable_flash_ich10}, > {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", > enable_flash_ich10}, > + {0x8086, 0x3b02, NT, "Intel", "P55", > enable_flash_ich10}, > + {0x8086, 0x3b03, NT, "Intel", "PM55", > enable_flash_ich10}, > + {0x8086, 0x3b06, NT, "Intel", "H55", > enable_flash_ich10}, > + {0x8086, 0x3b07, OK, "Intel", "QM57", > enable_flash_ich10}, > + {0x8086, 0x3b08, NT, "Intel", "H57", > enable_flash_ich10}, > + {0x8086, 0x3b09, NT, "Intel", "HM55", > enable_flash_ich10}, > + {0x8086, 0x3b0a, NT, "Intel", "Q57", > enable_flash_ich10}, > + {0x8086, 0x3b0b, NT, "Intel", "HM57", > enable_flash_ich10}, > {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", > enable_flash_ich10}, > + {0x8086, 0x3b0e, NT, "Intel", "B55", > enable_flash_ich10}, > See below > + {0x8086, 0x3b0f, NT, "Intel", "QS57", > enable_flash_ich10}, > + {0x8086, 0x3b12, NT, "Intel", "3400", > enable_flash_ich10}, > + {0x8086, 0x3b14, NT, "Intel", "3420", > enable_flash_ich10}, > + {0x8086, 0x3b16, NT, "Intel", "3450", > enable_flash_ich10}, > + {0x8086, 0x3b1e, NT, "Intel", "B55", > enable_flash_ich10}, > Thanks for finding/adding "B55": the friendly name for this chipset is empty in forementioned patch (see patchwork). Do you perchance have a verbose log of flashrom (flashrom -V) from that chipset ? {0x8086, 0x7198, OK, "Intel", "440MX", > enable_flash_piix4}, > {0x8086, 0x25a1, OK, "Intel", "6300ESB", > enable_flash_ich_4e}, > {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", > enable_flash_ich_dc}, > diff -urN flashrom-0.9.2/ichspi.c flashrom/ichspi.c > --- flashrom-0.9.2/ichspi.c 2010-07-28 00:41:39.000000000 +0200 > +++ flashrom/ichspi.c 2010-08-05 13:30:32.000000000 +0200 > @@ -560,7 +560,9 @@ > } > > /* Assemble SSFS + SSFC */ > - temp32 = 0; > + /* keep reserved bits (23-19,7,0) */ > + temp32 = REGREAD32(ICH9_REG_SSFS); > + temp32 &= 0xF8008100; > > /* clear error status registers */ > temp32 |= (SSFS_CDS + SSFS_FCERR); > > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

2 1

New Intel Chipsets
by Wagner, Helge (GE Intelligent Platforms) 05 Aug '10

05 Aug '10

I have added support for some new intel chipsets. (At least) for the QM57 which i have tested an additional patch was needed as some reserved bits in the "Software Sequencing Flash Control Register" (SSFC) needs to be programmed to 1 in the QM57. Signed-off-by: Helge Wagner <helge.wagner(a)ge.com> diff -urN flashrom-0.9.2/chipset_enable.c flashrom/chipset_enable.c --- flashrom-0.9.2/chipset_enable.c 2010-08-01 01:16:09.000000000 +0200 +++ flashrom/chipset_enable.c 2010-08-05 13:28:29.000000000 +0200 @@ -1011,7 +1011,21 @@ {0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000}, {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_ich10}, {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_ich10}, + {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_ich10}, + {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_ich10}, + {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_ich10}, + {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_ich10}, + {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_ich10}, + {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_ich10}, + {0x8086, 0x3b0a, NT, "Intel", "Q57", enable_flash_ich10}, + {0x8086, 0x3b0b, NT, "Intel", "HM57", enable_flash_ich10}, {0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", enable_flash_ich10}, + {0x8086, 0x3b0e, NT, "Intel", "B55", enable_flash_ich10}, + {0x8086, 0x3b0f, NT, "Intel", "QS57", enable_flash_ich10}, + {0x8086, 0x3b12, NT, "Intel", "3400", enable_flash_ich10}, + {0x8086, 0x3b14, NT, "Intel", "3420", enable_flash_ich10}, + {0x8086, 0x3b16, NT, "Intel", "3450", enable_flash_ich10}, + {0x8086, 0x3b1e, NT, "Intel", "B55", enable_flash_ich10}, {0x8086, 0x7198, OK, "Intel", "440MX", enable_flash_piix4}, {0x8086, 0x25a1, OK, "Intel", "6300ESB", enable_flash_ich_4e}, {0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", enable_flash_ich_dc}, diff -urN flashrom-0.9.2/ichspi.c flashrom/ichspi.c --- flashrom-0.9.2/ichspi.c 2010-07-28 00:41:39.000000000 +0200 +++ flashrom/ichspi.c 2010-08-05 13:30:32.000000000 +0200 @@ -560,7 +560,9 @@ } /* Assemble SSFS + SSFC */ - temp32 = 0; + /* keep reserved bits (23-19,7,0) */ + temp32 = REGREAD32(ICH9_REG_SSFS); + temp32 &= 0xF8008100; /* clear error status registers */ temp32 |= (SSFS_CDS + SSFS_FCERR);

1 0

How disable Laptop Check!
by silversurfer.2010＠gmx.de 05 Aug '10

05 Aug '10

Hello, on my table there is a HP NC6400 Laptop and I want to the use flashrom tool. But there is a DMI-Laptop scan detection that disables further operations with the flashtool. How can I disable this scan to use the flashrom tool? Best regards

2 1

ASUS A8N-SLI Premium Success Report
by pat-lkml 04 Aug '10

04 Aug '10

2 2

Help, please. :-)
by Colin Williams 04 Aug '10

04 Aug '10

Hi all, I have a SuperMicro H8QG6/i-F motherboard, which I recently attempted to flash with flashrom. As per the man page, I probed the rom first, then made a backup of the current state, which I have. Initially, the probe reported my chip as a "SST SST25VF016B", with the probe, read, and write operations supported. I attempted to flash another copy of the current rom (obtained from super micro's website), and it complained about not being able to erase, then said "SUCCESS" and "done", and "COMPLETE". Then it started verifying, and the verify failed. I then tried to restore the backup I had made, and it now reports the chip as a "SST unknown SST SPI chip", with all four operations not working. Attached are the output of the failed flash attempt, and a probe from after that attempt. Thanks, --Colin

4 5

[PATCH] W83697 superio safety checks
by David Borg 03 Aug '10

03 Aug '10

Patch to add safety checks for W83697 SuperIO enables. This impacts already known working boards, should I reset the Test ok fields? The following boards are affected, however they all have a W83697HF/F/HG SuperIO, which I tested as OK on Asus P4S800-MX "MSI" "MS-6590 (KT4 Ultra)" "MSI" "MS-6712 (KT4V)" "ASUS" "A7V8X-MX SE" "ASUS" "P4S800-MX" "Tyan" "S2498 (Tomcat K7M)" "EPoX" "EP-8K5A2" "Termtek" "TK-3370 (Rev:2.5B)" "MSI" "MS-7005 (651M-L)" "Shuttle" "AK31" http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fww… "Albatron" "PM266A Pro" (according to manual) Signed-off-by: David Borg <borg.db(a)gmail.com> Regards, David

1 0

Re: [flashrom] Unable to use flasrom0.9.1 in my board
by sougata.barik＠wipro.com 02 Aug '10

02 Aug '10

Hi, I am using flashrom 0.9.1 in intel EP80579 processor which is connected to flash SST25VF016B by spi interface but when I am trying to use it, it shows following error [root@localhost flashrom-0.9.1]# ./flashrom -V flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel EP80579", enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0xd70260: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x0 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4240 (SPIC) 0x04: 0x00f4d606 (SPIA) 0x08: 0x41bf41bf (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00e00000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x163b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x00016090 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) WARNING: SPI Configuration Lockdown activated. Generating OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Calibrating delay loop... 341M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF041A, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF081, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF161, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF321, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF321A, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25DF641, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25F512B, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25FS010, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT25FS040, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF041, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Atmel AT26DF161, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26DF161A, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT26F004, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB011D, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB021D, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB041D, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB081D, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Atmel AT45DB321C, 4224 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB321D, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT45DB642D, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B80, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Eon EN25B16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25B64, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25D16, 2048 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Eon EN25F05, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Eon EN25F32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1005, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L2005, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L4005, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L8005, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1605, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L1635D, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L3205, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L3235D, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L6405, 8192 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX25L12805, 16384 KB: Transaction error! run OPCODE 0x90 failed Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for Numonyx M25PE20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE40, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Numonyx M25PE16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV010, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV016B, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV020, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV040, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for PMC Pm25LV512, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL016A, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF016B, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF032B, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040B, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF040B.REMS, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST25VF080B, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P05.RES, 64 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P10-A, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P10.RES, 128 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P40-old, 512 KB: Transaction error! run OPCODE 0x90 failed Invalid OPCODE 0xab Probing for ST M25P80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P32, 4096 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M25P64, 8192 KB: RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Probing for ST M25P128, 16384 KB: Transaction error! run OPCODE 0x90 failed Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x20, 256 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x40, 512 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x80, 1024 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W25x16, 2048 KB: Transaction error! run OPCODE 0x90 failed Probing for Winbond W29C011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. Transaction error! run OPCODE 0x90 failed Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xbf 0x41 0xbf. probe_spi_rdid_generic: id1 0xbf, id2 0x41bf Not unmapping zero size at (nil) No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. [root@localhost flashrom-0.9.1]# CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.3 | VT102 | Offline [root@localhost flashrom-0.9.1]# ./flashrom -c SST25VF016B flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel EP80579", enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. This chipset supports the following protocols: SPI. Calibrating delay loop... OK. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically. [root@localhost flashrom-0.9.1]# please tell me what should I do to work this utility in my board and how I can download flashrom from svn?? regards, Sougata Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 1

Results Asus Rampage II Extreme Motherboard
by Melroy van den Berg 02 Aug '10

02 Aug '10

Hi FlashRom, Output of the "sudo flashrom -w RampageII-ASUS-Extreme-1802.ROM": http://pastebin.com/hh7EmzRp The results of "sudo flashrom -V": http://flashrom.pastebin.com/jCgAin5D Results of "sudo superiotool -deV": http://flashrom.pastebin.com/ZZHzgjH3 And, the "lspci -nnvvvxxx" commando: http://flashrom.pastebin.com/TsB8zg07 Motherboard name: Asus Rampage II Extreme http://www.asus.com/Product.aspx?P_ID=W7i5W4Pw4fH22Mih&content=specificatio… New downloaded BIOS: Rampage II Extreme BIOS 1802 (2010/02/08 update) Downloaded from: http://support.asus.com/download/download.aspx -- Kind regards, Melroy van den Berg webmaster(a)web-share.nl

1 0

Dell Vostro V13 Laptop flashrom found something
by XVilka Haos of System 02 Aug '10

02 Aug '10

Hi! I'm tried newest flashrom on newest kernel from git Caption: Dell Vostro V13 Product Link: http://www.dell.com/us/en/business/notebooks/vostro-v13/pd.aspx?refid=vostr… Board Vendor: Dell Inc. Board name: 0R45H1 CPU: Intel® Celeron 743 (1.2GHz, 1MB L2 cache) (Ultra Low Voltage) Chipset: Mobile Intel® GS45 Express Chipset ICH9M-Enhanced Graphics: Intel Graphics Media Accelerator (GMA) 4500MHD Northbridge: GS45-GMHC Southbridge: ICH9M-E Motion Sensor: STM DE351DL DRAM bus width: 64-bit buses Processor address bus width: 36 bits Flash EPROM: SPI 16 Mbits PCI bus: 32 bits, 33 MHz Dissassebmle: http://blog.screenaid.com/2010/02/03/dell-vostro-v13-disassembly/ Service manual: http://support.dell.com/support/edocs/systems/vosV13/en/sm/specs.htm Super I/O chip: ITE IT8502E Embedded controller chip: ITE IT8502E Flash chip: Winbond 25Q16BVSIG Flashrom found something when tried to check flash chip id1=4e id2=44 -- Best regards, XVilka.

2 1

[commit] r1130 - trunk
by repository service 02 Aug '10

02 Aug '10

Author: mkarcher Date: Mon Aug 2 10:29:34 2010 New Revision: 1130 URL: http://flashrom.org/trac/coreboot/changeset/1130 Log: Board enable for Asus P4S800-MX lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-July/004172.html Signed-off-by: David Borg <borg.db(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sun Aug 1 02:13:49 2010 (r1129) +++ trunk/board_enable.c Mon Aug 2 10:29:34 2010 (r1130) @@ -352,7 +352,9 @@ } /** - * w83627: Enable MEMW# and set ROM size to max. + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83L517D, W83697HF/F/HG, W83697SF/UF/UG */ static void w836xx_memw_enable(uint16_t port) { @@ -1715,6 +1717,7 @@ {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, + {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise},

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom