- flashrom - mail.coreboot.org

Success - ECS NFORCE 570 SLIT-A (PCB:3.1)
by Arve Seljebu 21 Sep '10

21 Sep '10

Success for ECS NFORCE 570 SLIT-A (PCB:3.1) - http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=677&C… Regards Arve Seljebu

1 0

Motherboad supported: Asus P5QL-CM
by Денис Юсупов 21 Sep '10

21 Sep '10

Hello! I have Asus P5QL-CM motherboard, and flashrom works just fine. See logs: server# flashrom -VV -r /mnt/flash/P5QL-CM.oldbios flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1016 us, 10000 myus = 10020 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25Q80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Not unmapping zero size at 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. server# flashrom -Vw /mnt/flash/2/P5QL-ASUS-0615.ROM flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1021 us, 10000 myus = 10020 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list. Invalid OPCODE 0x20 spi_block_erase_20 failed during command execution at address 0x0 Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff, SUCCESS. done. Programming page: COMPLETE. Verifying flash... VERIFIED. flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1015 us, 10000 myus = 10021 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. server# server# pciconf -lbcv hostb0@pci0:0:0:0: class=0x060000 card=0x83361043 chip=0x2e208086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 12) Intel cap 2 version 1 vgapci0@pci0:0:2:0: class=0x030000 card=0x83361043 chip=0x2e228086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA bar [10] = type Memory, range 64, base 0xfe400000, size 4194304, enabled bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0xcc00, size 8, enabled cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 13[a4] = PCI Advanced Features: FLR TP vgapci1@pci0:0:2:1: class=0x038000 card=0x83361043 chip=0x2e238086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display bar [10] = type Memory, range 64, base 0xfe900000, size 1048576, enabled cap 01[d0] = powerspec 2 supports D0 D3 current D0 uhci0@pci0:0:26:0: class=0x0c0300 card=0x82d41043 chip=0x3a378086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *4' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc480, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci1@pci0:0:26:1: class=0x0c0300 card=0x82d41043 chip=0x3a388086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *5' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc800, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci2@pci0:0:26:2: class=0x0c0300 card=0x82d41043 chip=0x3a398086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *6' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc880, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 ehci0@pci0:0:26:7: class=0x0c0320 card=0x82d41043 chip=0x3a3c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *2' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xfe8fbc00, size 1024, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 09[98] = vendor (length 6) Intel cap 2 version 0 none0@pci0:0:27:0: class=0x040300 card=0x84201043 chip=0x3a3e8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'Microsoft UAA Bus Driver for High Definition Audio (Microsoft UAA Bus Driver for High Definition Audio)' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0xfe8f4000, size 16384, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0) pcib1@pci0:0:28:0: class=0x060400 card=0x82d41043 chip=0x3a408086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 1' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x82d41043 cap 01[a0] = powerspec 2 supports D0 D3 current D0 pcib2@pci0:0:28:5: class=0x060400 card=0x82d41043 chip=0x3a4a8086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 6' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x82d41043 cap 01[a0] = powerspec 2 supports D0 D3 current D0 uhci3@pci0:0:29:0: class=0x0c0300 card=0x82d41043 chip=0x3a348086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *1' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc000, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci4@pci0:0:29:1: class=0x0c0300 card=0x82d41043 chip=0x3a358086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *2' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc080, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci5@pci0:0:29:2: class=0x0c0300 card=0x82d41043 chip=0x3a368086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *3' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc400, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 ehci1@pci0:0:29:7: class=0x0c0320 card=0x82d41043 chip=0x3a3a8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *1' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xfe8fb800, size 1024, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 09[98] = vendor (length 6) Intel cap 2 version 0 pcib3@pci0:0:30:0: class=0x060401 card=0x82d41043 chip=0x244e8086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI cap 0d[50] = PCI Bridge card=0x82d41043 isab0@pci0:0:31:0: class=0x060100 card=0x82d41043 chip=0x3a188086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface Controller' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10 atapci0@pci0:0:31:2: class=0x010601 card=0x82d41043 chip=0x3a228086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '6 port SATA AHCI Controller' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0xb880, size 8, enabled bar [14] = type I/O Port, range 32, base 0xb800, size 4, enabled bar [18] = type I/O Port, range 32, base 0xb480, size 8, enabled bar [1c] = type I/O Port, range 32, base 0xb400, size 4, enabled bar [20] = type I/O Port, range 32, base 0xb080, size 32, enabled bar [24] = type Memory, range 32, base 0xfe8fa800, size 2048, enabled cap 05[80] = MSI supports 16 messages cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair cap 09[b0] = vendor (length 6) Intel cap 2 version 0 none1@pci0:0:31:3: class=0x0c0500 card=0x82d41043 chip=0x3a308086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'SMB controller (50011458)' class = serial bus subclass = SMBus bar [10] = type Memory, range 64, base 0xfe8fb400, size 256, enabled bar [20] = type I/O Port, range 32, base 0x400, size 32, enabled re0@pci0:1:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled bar [18] = type Prefetchable Memory, range 64, base 0xfdeff000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0xfdee0000, size 65536, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 2 messages, 64 bit enabled with 1 message cap 10[70] = PCI-Express 1 endpoint IRQ 2 max data 128(256) link x1(x1) cap 11[b0] = MSI-X supports 2 messages in map 0x20 cap 03[d0] = VPD em0@pci0:3:0:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xec00, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction server# server# superiotool -deV superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x4400, id=0x23a0 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xa023, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627DHG (id=0xa0, rev=0x23) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff a0 23 ff 00 44 00 00 ff 50 00 00 00 92 21 00 ff def 00 a0 NA ff 00 MM 00 MM RR 50 00 00 RR e2 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 00 04 3c def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 83 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial peripheral interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 6) idx 30 f4 f5 f6 f7 val 06 ff ff ff ff def 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe val 0f df 01 00 ff 04 00 00 0c 36 21 f3 04 00 09 16 fe 00 00 00 def 00 ff 00 00 ff 00 00 00 00 00 00 ff 00 00 00 ff 00 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe val 01 00 01 00 47 04 20 02 1c 10 09 00 7d 00 00 00 00 00 def 00 00 01 00 ff 08 00 RR 1c 00 RR RR 7c 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 f2 val 01 02 90 00 81 00 83 def 00 00 00 00 81 00 00 LDN 0x0c (PECI, SST) idx e0 e1 e2 e3 e4 e5 e8 f1 fe ff val 10 64 48 48 48 00 01 48 f0 40 def 00 48 48 48 48 00 00 48 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff server# -- WBR, Dennis Yusupoff

1 0

[commit] r1180 - trunk
by repository service 20 Sep '10

20 Sep '10

Author: uwe Date: Mon Sep 20 19:23:38 2010 New Revision: 1180 URL: http://flashrom.org/trac/flashrom/changeset/1180 Log: The variable 'ret' is unused when compiling on BigEndian architecture. This produces an "unused variable" message, which might be treated as error if -Werror was passed to compiler. With this patch I was able to compile flashrom cleanly on ppc and ppc64: http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482 http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484 Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/internal.c Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Sun Sep 19 01:42:36 2010 (r1179) +++ trunk/internal.c Mon Sep 20 19:23:38 2010 (r1180) @@ -118,7 +118,9 @@ int internal_init(void) { +#if __FLASHROM_LITTLE_ENDIAN__ int ret = 0; +#endif int force_laptop = 0; char *arg;

1 0

[PATCH] Suppress error message from GCC while compiling with -Werror
by Peter Lemenkov 20 Sep '10

20 Sep '10

Hello. The variable 'ret' is unused when compiling on BigEndian architecture. This produces "unused variable" message, which might be treated as error if -Werror was passed to compiler. With this patch I was able to compile flashrom cleanly on ppc and ppc64: http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482 http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484 Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- internal.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/internal.c b/internal.c index 8b19692..497ce6c 100644 --- a/internal.c +++ b/internal.c @@ -118,7 +118,9 @@ int is_laptop = 0; int internal_init(void) { +#if __FLASHROM_LITTLE_ENDIAN__ int ret = 0; +#endif int force_laptop = 0; char *arg; -- 1.7.2.2

2 1

[PATCH] AMD chip IDs fix-up
by Mattias Mattsson 19 Sep '10

19 Sep '10

Hi, This patch: - Changes chip ID constant names to the "canonical" chip name for AMD chips - Adds useful comments where the same ID corresponds to different chips. - Also adds a bunch of new chip IDs. All IDs are verified against the official AMD datasheets. Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

1 0

[PATCH] Add Alliance Semiconductor chip IDs
by Mattias Mattsson 19 Sep '10

19 Sep '10

Add chip IDs for Alliance Semiconductor flash chips. Cross-checked with UniFlash 1.40 source, chip datasheets and EZoFlash's chip database (http://www.ezoflash.com/chip_database.php). Datasheets: http://www.ezoflash.com/datasheets/flash/Alliance/AS29F002.pdf http://www.alsc.com/pdf/flash.pdf/as29f010.pdf http://www.alsc.com/pdf/flash.pdf/as29f040.pdf http://www.alsc.com/pdf/flash.pdf/as29f200.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV160.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV400.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV800.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 2

[commit] r1179 - trunk
by repository service 19 Sep '10

19 Sep '10

Author: mhm Date: Sun Sep 19 01:42:36 2010 New Revision: 1179 URL: http://flashrom.org/trac/flashrom/changeset/1179 Log: Add chip IDs for Alliance Semiconductor flash chips. Cross-checked with UniFlash 1.40 source, chip datasheets and EZoFlash's chip database (http://www.ezoflash.com/chip_database.php). Datasheets: http://www.ezoflash.com/datasheets/flash/Alliance/AS29F002.pdf http://www.alsc.com/pdf/flash.pdf/as29f010.pdf http://www.alsc.com/pdf/flash.pdf/as29f040.pdf http://www.alsc.com/pdf/flash.pdf/as29f200.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV160.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV400.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV800.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.h Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Sep 17 00:34:25 2010 (r1178) +++ trunk/flashchips.h Sun Sep 19 01:42:36 2010 (r1179) @@ -38,6 +38,18 @@ #define GENERIC_DEVICE_ID 0xffff /* Only match the vendor ID */ #define ALLIANCE_ID 0x52 /* Alliance Semiconductor */ +#define ALLIANCE_AS29F002B 0x34 +#define ALLIANCE_AS29F002T 0xB0 +#define ALLIANCE_AS29F010 0x04 +#define ALLIANCE_AS29F040 0xA4 +#define ALLIANCE_AS29F200B 0x57 +#define ALLIANCE_AS29F200T 0x51 +#define ALLIANCE_AS29LV160B 0x49 +#define ALLIANCE_AS29LV160T 0xCA +#define ALLIANCE_AS29LV400B 0xBA +#define ALLIANCE_AS29LV400T 0xB9 +#define ALLIANCE_AS29LV800B 0x5B +#define ALLIANCE_AS29LV800T 0xDA #define AMD_ID 0x01 /* AMD */ #define AMD_AM29DL400BT 0x0C

1 0

Intel board D945GNT
by Beiad Dalton 19 Sep '10

19 Sep '10

BIOS link: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18416&ProdId…

1 0

Asus m2n68-AM plus motherboard
by Mahesh T. Pai 17 Sep '10

17 Sep '10

Dear team, Board URL:- http://www.asus.com/product.aspx?P_ID=N9gfnjYUinlROPLf Was checking if flashrom supports my mother board, and since there is apparently some trouble, sending this report. <output of flashrom -V> http://www.asus.com/product.aspx?P_ID=N9gfnjYUinlROPLf Was checking if flashrom supports my mother board, and since there is apparently some trouble, sending this report. <output of flashrom -V> flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1274M loops per second, 10 myus = 9 us, 100 myus = 94 us, 1000 myus = 940 us, 10000 myus = 10236 us, 4 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N68-AM Plus" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e1, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org! This chipset supports the following protocols: SPI. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. <end output of flashrom -v> Here is outpus of lspci <output of lspci -v -v> 00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 0900 [size=256] 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 0e00 [size=64] Region 4: I/O ports at 0600 [size=64] Region 5: I/O ports at 0700 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at dfffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at dfffac00 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 83a4 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) Subsystem: ASUSTeK Computer Inc. Device 8290 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at dfff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: HDA Intel 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e480 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+ Address: 00000000fee0100c Data: 4181 Masking: 000000fe Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: forcedeth 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at e400 [size=8] Region 1: I/O ports at e080 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at d880 [size=16] Region 5: Memory at dfff8000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at d480 [size=4] Region 2: I/O ports at d400 [size=8] Region 3: I/O ports at d080 [size=4] Region 4: I/O ports at d000 [size=16] Region 5: Memory at dffef000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4149 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dffc0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: nvidia 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- </end output of lspci -v -v> I could also (apparently) read the flash file using flashrom -Vr. The output file is 1048576 bytes. Can send the file if required. Verification goes ok. Here is the output:- <output of verification of read file> $ sudo flashrom -v orig.file flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... SPI on this chipset is WIP. Write is unsupported! Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org! This chipset supports the following protocols: SPI. Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED. </end> Flashrom is from the debian unstable repository. Please let me know if any further information is required. -- Mahesh T. Pai

1 0

[PATCH] Make Bus Pirate init more robust
by Carl-Daniel Hailfinger 17 Sep '10

17 Sep '10

Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_resilient_init/buspirate_spi.c =================================================================== --- flashrom-buspirate_resilient_init/buspirate_spi.c (Revision 1099) +++ flashrom-buspirate_resilient_init/buspirate_spi.c (Arbeitskopie) @@ -22,6 +22,7 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> +#include <unistd.h> #include "flash.h" #include "chipdrivers.h" #include "spi.h" @@ -140,6 +141,20 @@ /* Read any response and discard it. */ sp_flush_incoming(); } + /* USB is slow. The Bus Pirate is even slower. Apparently the flush + * action above is too fast or too early. Some stuff still remains in + * the pipe after the flush above, and one additional flush is not + * sufficient either. Use a 1.5 ms delay inside the loop to make + * mostly sure that at least one USB frame had time to arrive. + * Looping only 5 times is not sufficient and causes the + * ocassional failure. + * Folding the delay into the loop above is not reliable either. + */ + for (i = 0; i < 10; i++) { + usleep(1500); + /* Read any response and discard it. */ + sp_flush_incoming(); + } /* Enter raw bitbang mode */ buf[0] = 0x00; ret = buspirate_sendrecv(buf, 1, 5); @@ -147,6 +162,8 @@ return ret; if (memcmp(buf, "BBIO", 4)) { msg_perr("Entering raw bitbang mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); return 1; } msg_pdbg("Raw bitbang mode version %c\n", buf[4]); @@ -158,8 +175,12 @@ /* Enter raw SPI mode */ buf[0] = 0x01; ret = buspirate_sendrecv(buf, 1, 4); + if (ret) + return ret; if (memcmp(buf, "SPI", 3)) { msg_perr("Entering raw SPI mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3]); return 1; } msg_pdbg("Raw SPI mode version %c\n", buf[3]); Index: flashrom-buspirate_resilient_init/serial.c =================================================================== --- flashrom-buspirate_resilient_init/serial.c (Revision 1099) +++ flashrom-buspirate_resilient_init/serial.c (Arbeitskopie) @@ -199,8 +199,10 @@ #else tmp = write(sp_fd, buf, writecnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port write error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty write\n"); writecnt -= tmp; @@ -220,8 +222,10 @@ #else tmp = read(sp_fd, buf, readcnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port read error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty read\n"); readcnt -= tmp; -- http://www.hailfinger.org/

2 3

[commit] r1178 - trunk
by repository service 17 Sep '10

17 Sep '10

Author: hailfinger Date: Fri Sep 17 00:34:25 2010 New Revision: 1178 URL: http://flashrom.org/trac/flashrom/changeset/1178 Log: Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Mattias Mattsson <vitplister(a)gmail.com> Modified: trunk/buspirate_spi.c trunk/serial.c Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Fri Sep 17 00:09:18 2010 (r1177) +++ trunk/buspirate_spi.c Fri Sep 17 00:34:25 2010 (r1178) @@ -22,6 +22,7 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> +#include <unistd.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" @@ -141,6 +142,20 @@ /* Read any response and discard it. */ sp_flush_incoming(); } + /* USB is slow. The Bus Pirate is even slower. Apparently the flush + * action above is too fast or too early. Some stuff still remains in + * the pipe after the flush above, and one additional flush is not + * sufficient either. Use a 1.5 ms delay inside the loop to make + * mostly sure that at least one USB frame had time to arrive. + * Looping only 5 times is not sufficient and causes the + * ocassional failure. + * Folding the delay into the loop above is not reliable either. + */ + for (i = 0; i < 10; i++) { + usleep(1500); + /* Read any response and discard it. */ + sp_flush_incoming(); + } /* Enter raw bitbang mode */ buf[0] = 0x00; ret = buspirate_sendrecv(buf, 1, 5); @@ -148,6 +163,8 @@ return ret; if (memcmp(buf, "BBIO", 4)) { msg_perr("Entering raw bitbang mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); return 1; } msg_pdbg("Raw bitbang mode version %c\n", buf[4]); @@ -159,8 +176,12 @@ /* Enter raw SPI mode */ buf[0] = 0x01; ret = buspirate_sendrecv(buf, 1, 4); + if (ret) + return ret; if (memcmp(buf, "SPI", 3)) { msg_perr("Entering raw SPI mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3]); return 1; } msg_pdbg("Raw SPI mode version %c\n", buf[3]); Modified: trunk/serial.c ============================================================================== --- trunk/serial.c Fri Sep 17 00:09:18 2010 (r1177) +++ trunk/serial.c Fri Sep 17 00:34:25 2010 (r1178) @@ -200,8 +200,10 @@ #else tmp = write(sp_fd, buf, writecnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port write error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty write\n"); writecnt -= tmp; @@ -221,8 +223,10 @@ #else tmp = read(sp_fd, buf, readcnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port read error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty read\n"); readcnt -= tmp;

1 0

[PATCH] Board enable for Elitegroup GeForce6100SM-M
by Mattias Mattsson 17 Sep '10

17 Sep '10

Add board enable for Elitegroup GeForce6100SM-M Match on Memory Controller/LPC Bridge. lspci/superiotool output: http://www.coreboot.org/pipermail/flashrom/2010-September/004829.html Test report: http://www.coreboot.org/pipermail/flashrom/2010-September/004835.html Tested-by: Andrew Cleveland <evil.saltine(a)gmail.com> Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 2

[commit] r1177 - trunk
by repository service 17 Sep '10

17 Sep '10

Author: mhm Date: Fri Sep 17 00:09:18 2010 New Revision: 1177 URL: http://flashrom.org/trac/flashrom/changeset/1177 Log: Add board enable for Elitegroup GeForce6100SM-M Match on Memory Controller/LPC Bridge. lspci/superiotool output: http://www.coreboot.org/pipermail/flashrom/2010-September/004829.html Test report: http://www.coreboot.org/pipermail/flashrom/2010-September/004835.html Tested-by: Andrew Cleveland <evil.saltine(a)gmail.com> Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Sep 16 02:51:51 2010 (r1176) +++ trunk/board_enable.c Fri Sep 17 00:09:18 2010 (r1177) @@ -818,6 +818,29 @@ } /* + * Suited for: + * - Elitegroup GeForce6100SM-M: NVIDIA MCP61 + ITE IT8726F + */ + +static int board_ecs_geforce6100sm_m(void) +{ + struct pci_dev *dev; + uint32_t tmp; + + dev = pci_dev_find(0x10DE, 0x03EB); /* NVIDIA MCP61 SMBus. */ + if (!dev) { + msg_perr("\nERROR: NVIDIA MCP61 SMBus not found.\n"); + return -1; + } + + tmp = pci_read_byte(dev, 0xE0); + tmp &= ~(1 << 3); + pci_write_byte(dev, 0xE0, tmp); + + return 0; +} + +/* * Very similar to AMD 8111 IO Hub. */ static int nvidia_mcp_gpio_set(int gpio, int raise) @@ -1881,6 +1904,7 @@ {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, + {0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, NULL}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, {0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, "EPoX", "EP-8RDA3+", 0, OK, nvidia_mcp_gpio31_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Thu Sep 16 02:51:51 2010 (r1176) +++ trunk/print.c Fri Sep 17 00:09:18 2010 (r1177) @@ -393,6 +393,7 @@ B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), + B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL),

1 0

Wrapping up 0.9.3
by Carl-Daniel Hailfinger 16 Sep '10

16 Sep '10

I noticed that our patch queue is growing too fast to keep up, and it will be almost impossible to merge all patches before 0.9.3 unless we're willing to delay 0.9.3 for a few more months. Such a delay would also mean that many distributions won't have a reasonably current flashrom version. If you have any patches that need to be reviewed/merged, please reply to this mail with a link to the patch in patchwork: http://patchwork.coreboot.org/project/flashrom/list/ Priority will be given to patches which fix bugs, mark stuff as tested, or add new chips/boards. Speedup patches should get a chance as well, especially if they are tested. Features like ITE EC support, Nuvoton EC support, partial flashing and other fun stuff are better dealt with after 0.9.3. My hope is to tag flashrom 0.9.3 this week, and write release notes early next week, then officially release it. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

ECS Geforce6100SM-M board enable needed
by Andrew Cleveland 16 Sep '10

16 Sep '10

Hello, I have an ECS Geforce6100SM-M (v1.0 I believe); here is the output of 'flashrom -V', 'lspci -nnvvvxxx', and 'superiotool -deV' as requested on IRC. Official BIOS download: http://download.ecsusa.com/dlfileecs/bios/mb/p4/GeForce6100SM-M/61SM523.zip Thanks, Andrew

3 4

[PATCH 1/1] Mark Gigabyte GA-6ETXDR as UNSUPPORTED so far
by Peter Lemenkov 16 Sep '10

16 Sep '10

Here is a short flashrom log: dev ~ # ~petro/flashrom/flashrom flashrom v0.9.2-r1025 on Linux 2.6.18-164.15.1.el5 (i686), built with libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-48), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. dev ~ # Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- print.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/print.c b/print.c index bf75990..bfe2dcb 100644 --- a/print.c +++ b/print.c @@ -334,6 +334,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), + B("GIGABYTE", "GA-6ETXDR", 0, "http://www.gigabyte.com/products/product-page.aspx?pid=992", NULL), B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), -- 1.7.0.1

5 15

[commit] r1176 - trunk
by repository service 16 Sep '10

16 Sep '10

Author: mhm Date: Thu Sep 16 02:51:51 2010 New Revision: 1176 URL: http://flashrom.org/trac/flashrom/changeset/1176 Log: Add chip definitions for the folowing chips: Bright BM29F040 Hyundai HY29F040A Macronix MX29F040 Also add chip IDs for Bright BM29F400T/B Datasheets: http://www.ezoflash.com/datasheets/flash/Winbond/BM29F040.pdf http://www.ezoflash.com/datasheets/flash/Hyundai/HY29F040A.pdf http://www.ezoflash.com/datasheets/flash/Macronix/MX29F040.pdf http://www.ezoflash.com/datasheets/flash/Winbond/BM29F400T_B.pdf Bright BM29F040 probe/read test report: http://www.flashrom.org/pipermail/flashrom/2010-September/004805.html Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Mattias Mattsson <vitplister(a)gmail.com> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Sep 16 01:31:03 2010 (r1175) +++ trunk/flashchips.c Thu Sep 16 02:51:51 2010 (r1176) @@ -1962,6 +1962,32 @@ }, { + .vendor = "Bright", + .name = "BM29F040", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = BRIGHT_ID, + .model_id = BRIGHT_BM29F040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { .vendor = "EMST", .name = "F49B002UA", .bustype = CHIP_BUSTYPE_PARALLEL, @@ -3085,6 +3111,32 @@ }, { + .vendor = "Hyundai", + .name = "HY29F040A", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = HYUNDAI_ID, + .model_id = HYUNDAI_HY29F040A, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { .vendor = "Intel", .name = "28F001BX-B", .bustype = CHIP_BUSTYPE_PARALLEL, @@ -3877,6 +3929,32 @@ .block_erase = erase_chip_block_jedec, }, }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "Macronix", + .name = "MX29F040", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, .write = write_jedec_1, .read = read_memmapped, }, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Thu Sep 16 01:31:03 2010 (r1175) +++ trunk/flashchips.h Thu Sep 16 02:51:51 2010 (r1176) @@ -171,6 +171,12 @@ #define ATMEL_AT49F002N 0x07 /* for AT49F002(N) */ #define ATMEL_AT49F002NT 0x08 /* for AT49F002(N)T */ +/* Bright Microelectronics has the same manufacturer ID as Hyundai... */ +#define BRIGHT_ID 0xAD /* Bright Microelectronics */ +#define BRIGHT_BM29F040 0x40 +#define BRIGHT_BM29F400B 0xAB +#define BRIGHT_BM29F400T 0xAD + #define CATALYST_ID 0x31 /* Catalyst */ #define EMST_ID 0x8C /* EMST / EFST Elite Flash Storage */

1 0

[PATCH] Change prefix of chip id #defines
by Mattias Mattsson 16 Sep '10

16 Sep '10

This patch changes the prefix of chip constant #defines in the following way: AM_nnnnnnn -> AMD_AMnnnnnnn AT_nnnnnnn -> ATMEL_ATnnnnnnn EN_nnnnnnn -> EON_ENnnnnnnn MBMnnnnnnn -> FUJITSU_MBMnnnnnnn MX_ID -> MACRONIX_ID MX_nnnnnnn -> MACRONIX_MXnnnnnnn PMC_nnnnnnn -> PMC_PMnnnnnnn SST_nnnnnnn -> SST_SSTnnnnnnn It leaves the Intel #defines alone because there is another pending patch for that: http://patchwork.coreboot.org/patch/1937/ Some background discussion here: http://www.flashrom.org/pipermail/flashrom/2010-July/004059.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 2

[commit] r1175 - trunk
by repository service 16 Sep '10

16 Sep '10

Author: mhm Date: Thu Sep 16 01:31:03 2010 New Revision: 1175 URL: http://flashrom.org/trac/flashrom/changeset/1175 Log: This patch changes the prefix of chip constant #defines in the following way: AM_* -> AMD_AM* AT_* -> ATMEL_AT* EN_* -> EON_EN* HY_* -> HYUNDAI_HY* MBM* -> FUJITSU_MBM* MX_ID -> MACRONIX_ID MX_* -> MACRONIX_MX* PMC_* -> PMC_PM* SST_* -> SST_SST* It leaves the Intel #defines alone because there is another pending patch for that: http://patchwork.coreboot.org/patch/1937/ Some background discussion here: http://www.flashrom.org/pipermail/flashrom/2010-July/004059.html Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c trunk/flashchips.h trunk/spi25.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Sep 15 16:47:56 2010 (r1174) +++ trunk/flashchips.c Thu Sep 16 01:31:03 2010 (r1175) @@ -61,7 +61,7 @@ .name = "Am29F010A/B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F010B, /* Same as Am29F010A */ + .model_id = AMD_AM29F010B, /* Same as Am29F010A */ .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -87,7 +87,7 @@ .name = "Am29F002(N)BB", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F002BB, + .model_id = AMD_AM29F002BB, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, @@ -118,7 +118,7 @@ .name = "Am29F002(N)BT", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F002BT, + .model_id = AMD_AM29F002BT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, @@ -149,7 +149,7 @@ .name = "Am29F016D", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F016D, + .model_id = AMD_AM29F016D, .total_size = 2 * 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -175,7 +175,7 @@ .name = "Am29F040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F040B, + .model_id = AMD_AM29F040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -201,7 +201,7 @@ .name = "Am29F080B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29F080B, + .model_id = AMD_AM29F080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -227,7 +227,7 @@ .name = "Am29LV040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29LV040B, + .model_id = AMD_AM29LV040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -253,7 +253,7 @@ .name = "Am29LV081B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AM_29LV080B, + .model_id = AMD_AM29LV080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -1007,7 +1007,7 @@ .name = "AT25DF021", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF021, + .model_id = ATMEL_AT25DF021, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1044,7 +1044,7 @@ .name = "AT25DF041A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF041A, + .model_id = ATMEL_AT25DF041A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1081,7 +1081,7 @@ .name = "AT25DF081", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF081, + .model_id = ATMEL_AT25DF081, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1118,7 +1118,7 @@ .name = "AT25DF081A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF081A, + .model_id = ATMEL_AT25DF081A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1155,7 +1155,7 @@ .name = "AT25DF161", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF161, + .model_id = ATMEL_AT25DF161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1192,7 +1192,7 @@ .name = "AT25DF321", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF321, + .model_id = ATMEL_AT25DF321, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1229,7 +1229,7 @@ .name = "AT25DF321A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF321A, + .model_id = ATMEL_AT25DF321A, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1266,7 +1266,7 @@ .name = "AT25DF641", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DF641, + .model_id = ATMEL_AT25DF641, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1303,7 +1303,7 @@ .name = "AT25DQ161", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25DQ161, + .model_id = ATMEL_AT25DQ161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1340,7 +1340,7 @@ .name = "AT25F512B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25F512B, + .model_id = ATMEL_AT25F512B, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -1377,7 +1377,7 @@ .name = "AT25FS010", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25FS010, + .model_id = ATMEL_AT25FS010, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, @@ -1416,7 +1416,7 @@ .name = "AT25FS040", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_25FS040, + .model_id = ATMEL_AT25FS040, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -1452,7 +1452,7 @@ .name = "AT26DF041", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26DF041, + .model_id = ATMEL_AT26DF041, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -1474,7 +1474,7 @@ .name = "AT26DF081A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26DF081A, + .model_id = ATMEL_AT26DF081A, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PR, @@ -1509,7 +1509,7 @@ .name = "AT26DF161", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26DF161, + .model_id = ATMEL_AT26DF161, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -1544,7 +1544,7 @@ .name = "AT26DF161A", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26DF161A, + .model_id = ATMEL_AT26DF161A, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -1580,7 +1580,7 @@ .name = "AT26DF321", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26DF321, + .model_id = ATMEL_AT26DF321, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, @@ -1596,7 +1596,7 @@ .name = "AT26F004", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_26F004, + .model_id = ATMEL_AT26F004, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -1630,7 +1630,7 @@ .name = "AT29C512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_29C512, + .model_id = ATMEL_AT29C512, .total_size = 64, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -1654,7 +1654,7 @@ .name = "AT29C010A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_29C010A, + .model_id = ATMEL_AT29C010A, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -1677,7 +1677,7 @@ .name = "AT29C020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_29C020, + .model_id = ATMEL_AT29C020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, @@ -1700,7 +1700,7 @@ .name = "AT29C040A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_29C040A, + .model_id = ATMEL_AT29C040A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, @@ -1723,7 +1723,7 @@ .name = "AT45CS1282", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45CS1282, + .model_id = ATMEL_AT45CS1282, .total_size = 16896 /* No power of two sizes */, .page_size = 1056 /* No power of two sizes */, .tested = TEST_BAD_READ, @@ -1738,7 +1738,7 @@ .name = "AT45DB011D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB011D, + .model_id = ATMEL_AT45DB011D, .total_size = 128 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1753,7 +1753,7 @@ .name = "AT45DB021D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB021D, + .model_id = ATMEL_AT45DB021D, .total_size = 256 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1768,7 +1768,7 @@ .name = "AT45DB041D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB041D, + .model_id = ATMEL_AT45DB041D, .total_size = 512 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1783,7 +1783,7 @@ .name = "AT45DB081D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB081D, + .model_id = ATMEL_AT45DB081D, .total_size = 1024 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1798,7 +1798,7 @@ .name = "AT45DB161D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB161D, + .model_id = ATMEL_AT45DB161D, .total_size = 2048 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1813,7 +1813,7 @@ .name = "AT45DB321C", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB321C, + .model_id = ATMEL_AT45DB321C, .total_size = 4224 /* No power of two sizes */, .page_size = 528 /* No power of two sizes */, .tested = TEST_BAD_READ, @@ -1828,7 +1828,7 @@ .name = "AT45DB321D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB321D, + .model_id = ATMEL_AT45DB321D, .total_size = 4096 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1843,7 +1843,7 @@ .name = "AT45DB642D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, - .model_id = AT_45DB642D, + .model_id = ATMEL_AT45DB642D, .total_size = 8192 /* Size can only be determined from status register */, .page_size = 1024 /* Size can only be determined from status register */, .tested = TEST_BAD_READ, @@ -1858,7 +1858,7 @@ .name = "AT49BV512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_49BV512, + .model_id = ATMEL_AT49BV512, .total_size = 64, .page_size = 64, .feature_bits = FEATURE_EITHER_RESET, @@ -1881,7 +1881,7 @@ .name = "AT49F020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_49F020, + .model_id = ATMEL_AT49F020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, @@ -1904,7 +1904,7 @@ .name = "AT49F002(N)", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_49F002N, + .model_id = ATMEL_AT49F002N, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, @@ -1935,7 +1935,7 @@ .name = "AT49F002(N)T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ATMEL_ID, - .model_id = AT_49F002NT, + .model_id = ATMEL_AT49F002NT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, @@ -2029,7 +2029,7 @@ .name = "EN25B05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B05, + .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, @@ -2060,7 +2060,7 @@ .name = "EN25B05T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B05, + .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, @@ -2091,7 +2091,7 @@ .name = "EN25B10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B10, + .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, @@ -2122,7 +2122,7 @@ .name = "EN25B10T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B10, + .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, @@ -2153,7 +2153,7 @@ .name = "EN25B20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B20, + .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, @@ -2185,7 +2185,7 @@ .name = "EN25B20T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B20, + .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, @@ -2217,7 +2217,7 @@ .name = "EN25B40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B40, + .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -2249,7 +2249,7 @@ .name = "EN25B40T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B40, + .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -2281,7 +2281,7 @@ .name = "EN25B80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B80, + .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, @@ -2313,7 +2313,7 @@ .name = "EN25B80T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B80, + .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, @@ -2345,7 +2345,7 @@ .name = "EN25B16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B16, + .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -2377,7 +2377,7 @@ .name = "EN25B16T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B16, + .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -2409,7 +2409,7 @@ .name = "EN25B32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B32, + .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, @@ -2441,7 +2441,7 @@ .name = "EN25B32T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B32, + .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, @@ -2473,7 +2473,7 @@ .name = "EN25B64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B64, + .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2506,7 +2506,7 @@ .name = "EN25B64T", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25B64, + .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, @@ -2538,7 +2538,7 @@ .name = "EN25D16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25D16, + .model_id = EON_EN25D16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -2573,7 +2573,7 @@ .name = "EN25F05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F05, + .model_id = EON_EN25F05, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2609,7 +2609,7 @@ .name = "EN25F10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F10, + .model_id = EON_EN25F10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2645,7 +2645,7 @@ .name = "EN25F20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F20, + .model_id = EON_EN25F20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2681,7 +2681,7 @@ .name = "EN25F40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F40, + .model_id = EON_EN25F40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2714,7 +2714,7 @@ .name = "EN25F80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F80, + .model_id = EON_EN25F80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2747,7 +2747,7 @@ .name = "EN25F16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F16, + .model_id = EON_EN25F16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2780,7 +2780,7 @@ .name = "EN25F32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EN_25F32, + .model_id = EON_EN25F32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -2813,7 +2813,7 @@ .name = "EN29F010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, - .model_id = EN_29F010, + .model_id = EON_EN29F010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -2840,7 +2840,7 @@ .name = "EN29F002(A)(N)B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, - .model_id = EN_29F002B, + .model_id = EON_EN29F002B, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, @@ -2871,7 +2871,7 @@ .name = "EN29F002(A)(N)T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, - .model_id = EN_29F002T, + .model_id = EON_EN29F002T, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, @@ -2902,7 +2902,7 @@ .name = "MBM29F004BC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, - .model_id = MBM29F004BC, + .model_id = FUJITSU_MBM29F004BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -2933,7 +2933,7 @@ .name = "MBM29F004TC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, - .model_id = MBM29F004TC, + .model_id = FUJITSU_MBM29F004TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -2965,7 +2965,7 @@ .name = "MBM29F400BC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, - .model_id = MBM29F400BC, + .model_id = FUJITSU_MBM29F400BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, @@ -2996,7 +2996,7 @@ .name = "MBM29F400TC", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = FUJITSU_ID, - .model_id = MBM29F400TC, + .model_id = FUJITSU_MBM29F400TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, @@ -3027,7 +3027,7 @@ .name = "HY29F002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = HYUNDAI_ID, - .model_id = HY_29F002T, + .model_id = HYUNDAI_HY29F002T, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ @@ -3058,7 +3058,7 @@ .name = "HY29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = HYUNDAI_ID, - .model_id = HY_29F002B, + .model_id = HYUNDAI_HY29F002B, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ @@ -3348,8 +3348,8 @@ .vendor = "Macronix", .name = "MX25L512", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L512, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3384,8 +3384,8 @@ .vendor = "Macronix", .name = "MX25L1005", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L1005, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1005, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3417,8 +3417,8 @@ .vendor = "Macronix", .name = "MX25L2005", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L2005, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L2005, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3453,8 +3453,8 @@ .vendor = "Macronix", .name = "MX25L4005", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L4005, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L4005, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3489,8 +3489,8 @@ .vendor = "Macronix", .name = "MX25L8005", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L8005, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L8005, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3525,8 +3525,8 @@ .vendor = "Macronix", .name = "MX25L1605", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L1605, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3561,8 +3561,8 @@ .vendor = "Macronix", .name = "MX25L1635D", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L1635D, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1635D, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3594,8 +3594,8 @@ .vendor = "Macronix", .name = "MX25L1635E", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L1635E, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1635E, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3627,8 +3627,8 @@ .vendor = "Macronix", .name = "MX25L3205", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L3205, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3660,8 +3660,8 @@ .vendor = "Macronix", .name = "MX25L3235D", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L3235D, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3235D, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3693,8 +3693,8 @@ .vendor = "Macronix", .name = "MX25L6405", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L6405, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3726,8 +3726,8 @@ .vendor = "Macronix", .name = "MX25L12805", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, - .model_id = MX_25L12805, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L12805, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -3759,8 +3759,8 @@ .vendor = "Macronix", .name = "MX29F001B", .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = MX_ID, - .model_id = MX_29F001B, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F001B, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -3791,8 +3791,8 @@ .vendor = "Macronix", .name = "MX29F001T", .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = MX_ID, - .model_id = MX_29F001T, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F001T, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -3823,8 +3823,8 @@ .vendor = "Macronix", .name = "MX29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = MX_ID, - .model_id = MX_29F002B, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -3854,8 +3854,8 @@ .vendor = "Macronix", .name = "MX29F002T", .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = MX_ID, - .model_id = MX_29F002T, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -3885,8 +3885,8 @@ .vendor = "Macronix", .name = "MX29LV040", .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = MX_ID, - .model_id = MX_29LV040, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29LV040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -4239,7 +4239,7 @@ .name = "Pm25LV010", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV010, + .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, @@ -4268,7 +4268,7 @@ .name = "Pm25LV016B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV016B, + .model_id = PMC_PM25LV016B, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, @@ -4303,7 +4303,7 @@ .name = "Pm25LV020", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV020, + .model_id = PMC_PM25LV020, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, @@ -4332,7 +4332,7 @@ .name = "Pm25LV040", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV040, + .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -4361,7 +4361,7 @@ .name = "Pm25LV080B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV080B, + .model_id = PMC_PM25LV080B, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, @@ -4396,7 +4396,7 @@ .name = "Pm25LV512", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_25LV512, + .model_id = PMC_PM25LV512, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, @@ -4425,7 +4425,7 @@ .name = "Pm29F002T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_29F002T, + .model_id = PMC_PM29F002T, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -4456,7 +4456,7 @@ .name = "Pm29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_29F002B, + .model_id = PMC_PM29F002B, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -4487,7 +4487,7 @@ .name = "Pm39LV010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ + .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -4516,7 +4516,7 @@ .name = "Pm39LV020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_39LV020, + .model_id = PMC_PM39LV020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -4545,7 +4545,7 @@ .name = "Pm39LV040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_39LV040, + .model_id = PMC_PM39LV040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, @@ -4574,7 +4574,7 @@ .name = "Pm49FL002", .bustype = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_49FL002, + .model_id = PMC_PM49FL002, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -4604,7 +4604,7 @@ .name = "Pm49FL004", .bustype = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_49FL004, + .model_id = PMC_PM49FL004, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -4744,7 +4744,7 @@ .name = "SST25VF016B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF016B, + .model_id = SST_SST25VF016B, .total_size = 2048, .page_size = 256, .tested = TEST_OK_PREW, @@ -4779,7 +4779,7 @@ .name = "SST25VF032B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF032B, + .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, .tested = TEST_OK_PRW, @@ -4814,7 +4814,7 @@ .name = "SST25VF064C", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF064C, + .model_id = SST_SST25VF064C, .total_size = 8192, .page_size = 256, .tested = TEST_OK_PREW, @@ -4849,7 +4849,7 @@ .name = "SST25VF040.REMS", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF040_REMS, + .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, .tested = TEST_OK_PR, @@ -4878,7 +4878,7 @@ .name = "SST25VF040B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF040B, + .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, @@ -4913,7 +4913,7 @@ .name = "SST25LF040A.RES", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF040_REMS, + .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, .tested = TEST_OK_PROBE, @@ -4942,7 +4942,7 @@ .name = "SST25VF040B.REMS", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF040B_REMS, + .model_id = SST_SST25VF040B_REMS, .total_size = 512, .page_size = 256, .tested = TEST_OK_PR, @@ -4977,7 +4977,7 @@ .name = "SST25VF080B", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = SST_ID, - .model_id = SST_25VF080B, + .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, .tested = TEST_OK_PREW, @@ -5012,7 +5012,7 @@ .name = "SST28SF040A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_28SF040, + .model_id = SST_SST28SF040, .total_size = 512, .page_size = 256, .feature_bits = 0, @@ -5038,7 +5038,7 @@ .name = "SST29EE010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_29EE010, + .model_id = SST_SST29EE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -5061,7 +5061,7 @@ .name = "SST29LE010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_29LE010, + .model_id = SST_SST29LE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -5084,7 +5084,7 @@ .name = "SST29EE020A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_29EE020A, + .model_id = SST_SST29EE020A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -5107,7 +5107,7 @@ .name = "SST29LE020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_29LE020, + .model_id = SST_SST29LE020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -5130,7 +5130,7 @@ .name = "SST39SF512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39SF512, + .model_id = SST_SST39SF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5156,7 +5156,7 @@ .name = "SST39SF010A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39SF010, + .model_id = SST_SST39SF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5182,7 +5182,7 @@ .name = "SST39SF020A", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39SF020, + .model_id = SST_SST39SF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5208,7 +5208,7 @@ .name = "SST39SF040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39SF040, + .model_id = SST_SST39SF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5234,7 +5234,7 @@ .name = "SST39VF512", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39VF512, + .model_id = SST_SST39VF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5260,7 +5260,7 @@ .name = "SST39VF010", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39VF010, + .model_id = SST_SST39VF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5286,7 +5286,7 @@ .name = "SST39VF020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39VF020, + .model_id = SST_SST39VF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5312,7 +5312,7 @@ .name = "SST39VF040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39VF040, + .model_id = SST_SST39VF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5338,7 +5338,7 @@ .name = "SST39VF080", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_39VF080, + .model_id = SST_SST39VF080, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5367,7 +5367,7 @@ .name = "SST49LF002A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF002A, + .model_id = SST_SST49LF002A, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -5398,7 +5398,7 @@ .name = "SST49LF003A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF003A, + .model_id = SST_SST49LF003A, .total_size = 384, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -5432,7 +5432,7 @@ .name = "SST49LF004A/B", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF004A, + .model_id = SST_SST49LF004A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -5463,7 +5463,7 @@ .name = "SST49LF004C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, - .model_id = SST_49LF004C, + .model_id = SST_SST49LF004C, .total_size = 512, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, @@ -5495,7 +5495,7 @@ .name = "SST49LF008A", .bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF008A, + .model_id = SST_SST49LF008A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -5526,7 +5526,7 @@ .name = "SST49LF008C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, - .model_id = SST_49LF008C, + .model_id = SST_SST49LF008C, .total_size = 1024, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, @@ -5558,7 +5558,7 @@ .name = "SST49LF016C", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = SST_ID, - .model_id = SST_49LF016C, + .model_id = SST_SST49LF016C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, @@ -5590,7 +5590,7 @@ .name = "SST49LF020", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, - .model_id = SST_49LF020, + .model_id = SST_SST49LF020, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -5619,7 +5619,7 @@ .name = "SST49LF020A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, - .model_id = SST_49LF020A, + .model_id = SST_SST49LF020A, .total_size = 256, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -5648,7 +5648,7 @@ .name = "SST49LF040", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, - .model_id = SST_49LF040, + .model_id = SST_SST49LF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5677,7 +5677,7 @@ .name = "SST49LF040B", .bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF040B, + .model_id = SST_SST49LF040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, @@ -5707,7 +5707,7 @@ .name = "SST49LF080A", .bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */ .manufacture_id = SST_ID, - .model_id = SST_49LF080A, + .model_id = SST_SST49LF080A, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -5736,7 +5736,7 @@ .name = "SST49LF160C", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = SST_ID, - .model_id = SST_49LF160C, + .model_id = SST_SST49LF160C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, @@ -7740,7 +7740,7 @@ .vendor = "Macronix", .name = "unknown Macronix SPI chip", .bustype = CHIP_BUSTYPE_SPI, - .manufacture_id = MX_ID, + .manufacture_id = MACRONIX_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Sep 15 16:47:56 2010 (r1174) +++ trunk/flashchips.h Thu Sep 16 01:31:03 2010 (r1175) @@ -40,38 +40,38 @@ #define ALLIANCE_ID 0x52 /* Alliance Semiconductor */ #define AMD_ID 0x01 /* AMD */ -#define AM_29DL400BT 0x0C -#define AM_29DL400BB 0x0F -#define AM_29DL800BT 0x4A -#define AM_29DL800BB 0xCB -#define AM_29F002BB 0x34 /* Same as Am29F002NBB */ -#define AM_29F002BT 0xB0 /* Same as Am29F002NBT */ -#define AM_29F004BB 0x7B -#define AM_29F004BT 0x77 -#define AM_29F016D 0xAD -#define AM_29F010B 0x20 /* Same as Am29F010A */ -#define AM_29F040B 0xA4 -#define AM_29F080B 0xD5 -#define AM_29F200BB 0x57 -#define AM_29F200BT 0x51 -#define AM_29F400BB 0xAB -#define AM_29F400BT 0x23 -#define AM_29F800BB 0x58 -#define AM_29F800BT 0xD6 -#define AM_29LV002BB 0xC2 -#define AM_29LV002BT 0x40 -#define AM_29LV004BB 0xB6 -#define AM_29LV004BT 0xB5 -#define AM_29LV008BB 0x37 -#define AM_29LV008BT 0x3E -#define AM_29LV040B 0x4F -#define AM_29LV080B 0x38 /* Same as Am29LV081B */ -#define AM_29LV200BB 0xBF -#define AM_29LV200BT 0x3B -#define AM_29LV800BB 0x5B /* Same as Am29LV800DB */ -#define AM_29LV400BT 0xB9 -#define AM_29LV400BB 0xBA -#define AM_29LV800BT 0xDA /* Same as Am29LV800DT */ +#define AMD_AM29DL400BT 0x0C +#define AMD_AM29DL400BB 0x0F +#define AMD_AM29DL800BT 0x4A +#define AMD_AM29DL800BB 0xCB +#define AMD_AM29F002BB 0x34 /* Same as Am29F002NBB */ +#define AMD_AM29F002BT 0xB0 /* Same as Am29F002NBT */ +#define AMD_AM29F004BB 0x7B +#define AMD_AM29F004BT 0x77 +#define AMD_AM29F016D 0xAD +#define AMD_AM29F010B 0x20 /* Same as Am29F010A */ +#define AMD_AM29F040B 0xA4 +#define AMD_AM29F080B 0xD5 +#define AMD_AM29F200BB 0x57 +#define AMD_AM29F200BT 0x51 +#define AMD_AM29F400BB 0xAB +#define AMD_AM29F400BT 0x23 +#define AMD_AM29F800BB 0x58 +#define AMD_AM29F800BT 0xD6 +#define AMD_AM29LV002BB 0xC2 +#define AMD_AM29LV002BT 0x40 +#define AMD_AM29LV004BB 0xB6 +#define AMD_AM29LV004BT 0xB5 +#define AMD_AM29LV008BB 0x37 +#define AMD_AM29LV008BT 0x3E +#define AMD_AM29LV040B 0x4F +#define AMD_AM29LV080B 0x38 /* Same as Am29LV081B */ +#define AMD_AM29LV200BB 0xBF +#define AMD_AM29LV200BT 0x3B +#define AMD_AM29LV800BB 0x5B /* Same as Am29LV800DB */ +#define AMD_AM29LV400BT 0xB9 +#define AMD_AM29LV400BB 0xBA +#define AMD_AM29LV800BT 0xDA /* Same as Am29LV800DT */ #define AMIC_ID 0x7F37 /* AMIC */ #define AMIC_ID_NOPREFIX 0x37 /* AMIC */ @@ -111,65 +111,65 @@ #define AMIC_A49LF040A 0x9d #define ATMEL_ID 0x1F /* Atmel */ -#define AT_25DF021 0x4300 -#define AT_25DF041A 0x4401 -#define AT_25DF081 0x4502 -#define AT_25DF081A 0x4501 /* Yes, 81A has a lower number than 81 */ -#define AT_25DF161 0x4602 -#define AT_25DF321 0x4700 /* Same as 26DF321 */ -#define AT_25DF321A 0x4701 -#define AT_25DF641 0x4800 -#define AT_25DQ161 0x8600 -#define AT25F512 /* No device ID found in datasheet. Vendor ID +#define ATMEL_AT25DF021 0x4300 +#define ATMEL_AT25DF041A 0x4401 +#define ATMEL_AT25DF081 0x4502 +#define ATMEL_AT25DF081A 0x4501 /* Yes, 81A has a lower number than 81 */ +#define ATMEL_AT25DF161 0x4602 +#define ATMEL_AT25DF321 0x4700 /* Same as 26DF321 */ +#define ATMEL_AT25DF321A 0x4701 +#define ATMEL_AT25DF641 0x4800 +#define ATMEL_AT25DQ161 0x8600 +#define ATMEL_AT25F512 /* No device ID found in datasheet. Vendor ID * can be read with AT25F512A_RDID */ -#define AT_25F512A 0x65 /* Needs AT25F512A_RDID */ -#define AT_25F512B 0x6500 -#define AT25F1024 /* No device ID found in datasheet. Vendor ID +#define ATMEL_AT25F512A 0x65 /* Needs AT25F512A_RDID */ +#define ATMEL_AT25F512B 0x6500 +#define ATMEL_AT25F1024 /* No device ID found in datasheet. Vendor ID * can be read with AT25F512A_RDID */ -#define AT_25F1024A 0x60 /* Needs AT25F512A_RDID */ -#define AT_25FS010 0x6601 -#define AT_25FS040 0x6604 -#define AT_26DF041 0x4400 -#define AT_26DF081 0x4500 /* guessed, no datasheet available */ -#define AT_26DF081A 0x4501 -#define AT_26DF161 0x4600 -#define AT_26DF161A 0x4601 -#define AT_26DF321 0x4700 /* Same as 25DF321 */ -#define AT_26F004 0x0400 -#define AT_29C040A 0xA4 -#define AT_29C010A 0xD5 -#define AT_29C020 0xDA -#define AT_29C512 0x5D -#define AT_45BR3214B /* No ID available */ -#define AT_45CS1282 0x2920 -#define AT_45D011 /* No ID available */ -#define AT_45D021A /* No ID available */ -#define AT_45D041A /* No ID available */ -#define AT_45D081A /* No ID available */ -#define AT_45D161 /* No ID available */ -#define AT_45DB011 /* No ID available */ -#define AT_45DB011B /* No ID available */ -#define AT_45DB011D 0x2200 -#define AT_45DB021A /* No ID available */ -#define AT_45DB021B /* No ID available */ -#define AT_45DB021D 0x2300 -#define AT_45DB041A /* No ID available */ -#define AT_45DB041D 0x2400 -#define AT_45DB081A /* No ID available */ -#define AT_45DB081D 0x2500 -#define AT_45DB161 /* No ID available */ -#define AT_45DB161B /* No ID available */ -#define AT_45DB161D 0x2600 -#define AT_45DB321 /* No ID available */ -#define AT_45DB321B /* No ID available */ -#define AT_45DB321C 0x2700 -#define AT_45DB321D 0x2701 /* Buggy data sheet */ -#define AT_45DB642 /* No ID available */ -#define AT_45DB642D 0x2800 -#define AT_49BV512 0x03 -#define AT_49F020 0x0B -#define AT_49F002N 0x07 /* for AT49F002(N) */ -#define AT_49F002NT 0x08 /* for AT49F002(N)T */ +#define ATMEL_AT25F1024A 0x60 /* Needs AT25F512A_RDID */ +#define ATMEL_AT25FS010 0x6601 +#define ATMEL_AT25FS040 0x6604 +#define ATMEL_AT26DF041 0x4400 +#define ATMEL_AT26DF081 0x4500 /* guessed, no datasheet available */ +#define ATMEL_AT26DF081A 0x4501 +#define ATMEL_AT26DF161 0x4600 +#define ATMEL_AT26DF161A 0x4601 +#define ATMEL_AT26DF321 0x4700 /* Same as 25DF321 */ +#define ATMEL_AT26F004 0x0400 +#define ATMEL_AT29C040A 0xA4 +#define ATMEL_AT29C010A 0xD5 +#define ATMEL_AT29C020 0xDA +#define ATMEL_AT29C512 0x5D +#define ATMEL_AT45BR3214B /* No ID available */ +#define ATMEL_AT45CS1282 0x2920 +#define ATMEL_AT45D011 /* No ID available */ +#define ATMEL_AT45D021A /* No ID available */ +#define ATMEL_AT45D041A /* No ID available */ +#define ATMEL_AT45D081A /* No ID available */ +#define ATMEL_AT45D161 /* No ID available */ +#define ATMEL_AT45DB011 /* No ID available */ +#define ATMEL_AT45DB011B /* No ID available */ +#define ATMEL_AT45DB011D 0x2200 +#define ATMEL_AT45DB021A /* No ID available */ +#define ATMEL_AT45DB021B /* No ID available */ +#define ATMEL_AT45DB021D 0x2300 +#define ATMEL_AT45DB041A /* No ID available */ +#define ATMEL_AT45DB041D 0x2400 +#define ATMEL_AT45DB081A /* No ID available */ +#define ATMEL_AT45DB081D 0x2500 +#define ATMEL_AT45DB161 /* No ID available */ +#define ATMEL_AT45DB161B /* No ID available */ +#define ATMEL_AT45DB161D 0x2600 +#define ATMEL_AT45DB321 /* No ID available */ +#define ATMEL_AT45DB321B /* No ID available */ +#define ATMEL_AT45DB321C 0x2700 +#define ATMEL_AT45DB321D 0x2701 /* Buggy data sheet */ +#define ATMEL_AT45DB642 /* No ID available */ +#define ATMEL_AT45DB642D 0x2800 +#define ATMEL_AT49BV512 0x03 +#define ATMEL_AT49F020 0x0B +#define ATMEL_AT49F002N 0x07 /* for AT49F002(N) */ +#define ATMEL_AT49F002NT 0x08 /* for AT49F002(N)T */ #define CATALYST_ID 0x31 /* Catalyst */ @@ -188,94 +188,94 @@ */ #define EON_ID 0x7F1C /* EON Silicon Devices */ #define EON_ID_NOPREFIX 0x1C /* EON, missing 0x7F prefix */ -#define EN_25B05 0x2010 /* Same as P05, 2^19 kbit or 2^16 kByte */ -#define EN_25B05T 0x25 -#define EN_25B05B 0x95 -#define EN_25B10 0x2011 /* Same as P10 */ -#define EN_25B10T 0x40 -#define EN_25B10B 0x30 -#define EN_25B20 0x2012 /* Same as P20 */ -#define EN_25B20T 0x41 -#define EN_25B20B 0x31 -#define EN_25B40 0x2013 /* Same as P40 */ -#define EN_25B40T 0x42 -#define EN_25B40B 0x32 -#define EN_25B80 0x2014 /* Same as P80 */ -#define EN_25B80T 0x43 -#define EN_25B80B 0x33 -#define EN_25B16 0x2015 /* Same as P16 */ -#define EN_25B16T 0x44 -#define EN_25B16B 0x34 -#define EN_25B32 0x2016 /* Same as P32 */ -#define EN_25B32T 0x45 -#define EN_25B32B 0x35 -#define EN_25B64 0x2017 /* Same as P64 */ -#define EN_25B64T 0x46 -#define EN_25B64B 0x36 -#define EN_25D16 0x3015 -#define EN_25F05 0x3110 -#define EN_25F10 0x3111 -#define EN_25F20 0x3112 -#define EN_25F40 0x3113 -#define EN_25F80 0x3114 -#define EN_25F16 0x3115 -#define EN_25F32 0x3116 -#define EN_29F512 0x7F21 -#define EN_29F010 0x20 -#define EN_29F040A 0x7F04 -#define EN_29LV010 0x7F6E -#define EN_29LV040A 0x7F4F /* EN_29LV040(A) */ -#define EN_29F002T 0x7F92 /* Same as EN29F002A */ -#define EN_29F002B 0x7F97 /* Same as EN29F002AN */ +#define EON_EN25B05 0x2010 /* Same as P05, 2^19 kbit or 2^16 kByte */ +#define EON_EN25B05T 0x25 +#define EON_EN25B05B 0x95 +#define EON_EN25B10 0x2011 /* Same as P10 */ +#define EON_EN25B10T 0x40 +#define EON_EN25B10B 0x30 +#define EON_EN25B20 0x2012 /* Same as P20 */ +#define EON_EN25B20T 0x41 +#define EON_EN25B20B 0x31 +#define EON_EN25B40 0x2013 /* Same as P40 */ +#define EON_EN25B40T 0x42 +#define EON_EN25B40B 0x32 +#define EON_EN25B80 0x2014 /* Same as P80 */ +#define EON_EN25B80T 0x43 +#define EON_EN25B80B 0x33 +#define EON_EN25B16 0x2015 /* Same as P16 */ +#define EON_EN25B16T 0x44 +#define EON_EN25B16B 0x34 +#define EON_EN25B32 0x2016 /* Same as P32 */ +#define EON_EN25B32T 0x45 +#define EON_EN25B32B 0x35 +#define EON_EN25B64 0x2017 /* Same as P64 */ +#define EON_EN25B64T 0x46 +#define EON_EN25B64B 0x36 +#define EON_EN25D16 0x3015 +#define EON_EN25F05 0x3110 +#define EON_EN25F10 0x3111 +#define EON_EN25F20 0x3112 +#define EON_EN25F40 0x3113 +#define EON_EN25F80 0x3114 +#define EON_EN25F16 0x3115 +#define EON_EN25F32 0x3116 +#define EON_EN29F512 0x7F21 +#define EON_EN29F010 0x20 +#define EON_EN29F040A 0x7F04 +#define EON_EN29LV010 0x7F6E +#define EON_EN29LV040A 0x7F4F /* EN29LV040(A) */ +#define EON_EN29F002T 0x7F92 /* Same as EN29F002A */ +#define EON_EN29F002B 0x7F97 /* Same as EN29F002AN */ #define FUJITSU_ID 0x04 /* Fujitsu */ -#define MBM29DL400BC 0x0F -#define MBM29DL400TC 0x0C -#define MBM29DL800BA 0xCB -#define MBM29DL800TA 0x4A -#define MBM29F002BC 0x34 -#define MBM29F002TC 0xB0 -#define MBM29F004BC 0x7B -#define MBM29F004TC 0x77 -#define MBM29F040C 0xA4 -#define MBM29F080A 0xD5 -#define MBM29F200BC 0x57 -#define MBM29F200TC 0x51 -#define MBM29F400BC 0xAB -#define MBM29F400TC 0x23 -#define MBM29F800BA 0x58 -#define MBM29F800TA 0xD6 -#define MBM29LV002BC 0xC2 -#define MBM29LV002TC 0x40 -#define MBM29LV004BC 0xB6 -#define MBM29LV004TC 0xB5 -#define MBM29LV008BA 0x37 -#define MBM29LV008TA 0x3E -#define MBM29LV080A 0x38 -#define MBM29LV200BC 0xBF -#define MBM29LV200TC 0x3B -#define MBM29LV400BC 0xBA -#define MBM29LV400TC 0xB9 -#define MBM29LV800BA 0x5B /* Same as MBM29LV800BE */ -#define MBM29LV800TA 0xDA /* Same as MBM29LV800TE */ +#define FUJITSU_MBM29DL400BC 0x0F +#define FUJITSU_MBM29DL400TC 0x0C +#define FUJITSU_MBM29DL800BA 0xCB +#define FUJITSU_MBM29DL800TA 0x4A +#define FUJITSU_MBM29F002BC 0x34 +#define FUJITSU_MBM29F002TC 0xB0 +#define FUJITSU_MBM29F004BC 0x7B +#define FUJITSU_MBM29F004TC 0x77 +#define FUJITSU_MBM29F040C 0xA4 +#define FUJITSU_MBM29F080A 0xD5 +#define FUJITSU_MBM29F200BC 0x57 +#define FUJITSU_MBM29F200TC 0x51 +#define FUJITSU_MBM29F400BC 0xAB +#define FUJITSU_MBM29F400TC 0x23 +#define FUJITSU_MBM29F800BA 0x58 +#define FUJITSU_MBM29F800TA 0xD6 +#define FUJITSU_MBM29LV002BC 0xC2 +#define FUJITSU_MBM29LV002TC 0x40 +#define FUJITSU_MBM29LV004BC 0xB6 +#define FUJITSU_MBM29LV004TC 0xB5 +#define FUJITSU_MBM29LV008BA 0x37 +#define FUJITSU_MBM29LV008TA 0x3E +#define FUJITSU_MBM29LV080A 0x38 +#define FUJITSU_MBM29LV200BC 0xBF +#define FUJITSU_MBM29LV200TC 0x3B +#define FUJITSU_MBM29LV400BC 0xBA +#define FUJITSU_MBM29LV400TC 0xB9 +#define FUJITSU_MBM29LV800BA 0x5B /* Same as MBM29LV800BE */ +#define FUJITSU_MBM29LV800TA 0xDA /* Same as MBM29LV800TE */ #define HYUNDAI_ID 0xAD /* Hyundai */ -#define HY_29F400T 0x23 /* Same as HY_29F400AT */ -#define HY_29F800B 0x58 /* Same as HY_29F800AB */ -#define HY_29LV800B 0x5B -#define HY_29F040A 0xA4 -#define HY_29F400B 0xAB /* Same as HY_29F400AB */ -#define HY_29F002B 0x34 -#define HY_29F002T 0xB0 -#define HY_29LV400T 0xB9 -#define HY_29LV400B 0xBA -#define HY_29F080 0xD5 -#define HY_29F800T 0xD6 /* Same as HY_29F800AT */ -#define HY_29LV800T 0xDA +#define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ +#define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ +#define HYUNDAI_HY29LV800B 0x5B +#define HYUNDAI_HY29F040A 0xA4 +#define HYUNDAI_HY29F400B 0xAB /* Same as HY29F400AB */ +#define HYUNDAI_HY29F002B 0x34 +#define HYUNDAI_HY29F002T 0xB0 +#define HYUNDAI_HY29LV400T 0xB9 +#define HYUNDAI_HY29LV400B 0xBA +#define HYUNDAI_HY29F080 0xD5 +#define HYUNDAI_HY29F800T 0xD6 /* Same as HY29F800AT */ +#define HYUNDAI_HY29LV800T 0xDA #define IMT_ID 0x7F1F /* Integrated Memory Technologies */ -#define IM_29F004B 0xAE -#define IM_29F004T 0xAF +#define IMT_IM29F004B 0xAE +#define IMT_IM29F004T 0xAF #define INTEL_ID 0x89 /* Intel */ #define I_82802AB 0xAD @@ -301,58 +301,58 @@ * Generalplus SPI chips seem to be compatible with Macronix * and use the same set of IDs. */ -#define MX_ID 0xC2 /* Macronix (MX) */ -#define MX_25L512 0x2010 /* Same as MX25V512 */ -#define MX_25L1005 0x2011 -#define MX_25L2005 0x2012 -#define MX_25L4005 0x2013 /* MX25L4005{,A} */ -#define MX_25L8005 0x2014 /* Same as MX25V8005 */ -#define MX_25L1605 0x2015 /* MX25L1605{,A,D} */ -#define MX_25L3205 0x2016 /* MX25L3205{,A} */ -#define MX_25L6405 0x2017 /* MX25L3205{,D} */ -#define MX_25L12805 0x2018 /* MX25L12805 */ -#define MX_25L1635D 0x2415 -#define MX_25L1635E 0x2515 /* MX25L1635{E} */ -#define MX_25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ -#define MX_29F001B 0x19 -#define MX_29F001T 0x18 -#define MX_29F002B 0x34 /* Same as MX29F002NB */ -#define MX_29F002T 0xB0 /* Same as MX29F002NT */ -#define MX_29F004B 0x46 -#define MX_29F004T 0x45 -#define MX_29F022T 0x36 /* Same as MX29F022NT */ -#define MX_29F040 0xA4 /* Same as MX29F040C */ -#define MX_29F080 0xD5 -#define MX_29F200B 0x57 /* Same as MX29F200CB */ -#define MX_29F200T 0x51 /* Same as MX29F200CT */ -#define MX_29F400B 0xAB /* Same as MX29F400CB */ -#define MX_29F400T 0x23 /* Same as MX29F400CT */ -#define MX_29F800B 0x58 -#define MX_29F800T 0xD6 -#define MX_29LV002CB 0x5A -#define MX_29LV002CT 0x59 -#define MX_29LV004B 0xB6 /* Same as MX29LV004CB */ -#define MX_29LV004T 0xB5 /* Same as MX29LV004CT */ -#define MX_29LV008B 0x37 /* Same as MX29LV008CB */ -#define MX_29LV008T 0x3E /* Same as MX29LV008CT */ -#define MX_29LV040 0x4F /* Same as MX29LV040C */ -#define MX_29LV081 0x38 -#define MX_29LV128DB 0x7A -#define MX_29LV128DT 0x7E -#define MX_29LV160DB 0x49 /* Same as MX29LV161DB/MX29LV160CB */ -#define MX_29LV160DT 0xC4 /* Same as MX29LV161DT/MX29LV160CT */ -#define MX_29LV320DB 0xA8 /* Same as MX29LV321DB */ -#define MX_29LV320DT 0xA7 /* Same as MX29LV321DT */ -#define MX_29LV400B 0xBA /* Same as MX29LV400CB */ -#define MX_29LV400T 0xB9 /* Same as MX29LV400CT */ -#define MX_29LV640DB 0xCB /* Same as MX29LV640EB */ -#define MX_29LV640DT 0xC9 /* Same as MX29LV640ET */ -#define MX_29LV800B 0x5B /* Same as MX29LV800CB */ -#define MX_29LV800T 0xDA /* Same as MX29LV800CT */ -#define MX_29SL402CB 0xF1 -#define MX_29SL402CT 0x70 -#define MX_29SL800CB 0x6B /* Same as MX29SL802CB */ -#define MX_29SL800CT 0xEA /* Same as MX29SL802CT */ +#define MACRONIX_ID 0xC2 /* Macronix (MX) */ +#define MACRONIX_MX25L512 0x2010 /* Same as MX25V512 */ +#define MACRONIX_MX25L1005 0x2011 +#define MACRONIX_MX25L2005 0x2012 +#define MACRONIX_MX25L4005 0x2013 /* MX25L4005{,A} */ +#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005 */ +#define MACRONIX_MX25L1605 0x2015 /* MX25L1605{,A,D} */ +#define MACRONIX_MX25L3205 0x2016 /* MX25L3205{,A} */ +#define MACRONIX_MX25L6405 0x2017 /* MX25L3205{,D} */ +#define MACRONIX_MX25L12805 0x2018 /* MX25L12805 */ +#define MACRONIX_MX25L1635D 0x2415 +#define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */ +#define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ +#define MACRONIX_MX29F001B 0x19 +#define MACRONIX_MX29F001T 0x18 +#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB */ +#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT */ +#define MACRONIX_MX29F004B 0x46 +#define MACRONIX_MX29F004T 0x45 +#define MACRONIX_MX29F022T 0x36 /* Same as MX29F022NT */ +#define MACRONIX_MX29F040 0xA4 /* Same as MX29F040C */ +#define MACRONIX_MX29F080 0xD5 +#define MACRONIX_MX29F200B 0x57 /* Same as MX29F200CB */ +#define MACRONIX_MX29F200T 0x51 /* Same as MX29F200CT */ +#define MACRONIX_MX29F400B 0xAB /* Same as MX29F400CB */ +#define MACRONIX_MX29F400T 0x23 /* Same as MX29F400CT */ +#define MACRONIX_MX29F800B 0x58 +#define MACRONIX_MX29F800T 0xD6 +#define MACRONIX_MX29LV002CB 0x5A +#define MACRONIX_MX29LV002CT 0x59 +#define MACRONIX_MX29LV004B 0xB6 /* Same as MX29LV004CB */ +#define MACRONIX_MX29LV004T 0xB5 /* Same as MX29LV004CT */ +#define MACRONIX_MX29LV008B 0x37 /* Same as MX29LV008CB */ +#define MACRONIX_MX29LV008T 0x3E /* Same as MX29LV008CT */ +#define MACRONIX_MX29LV040 0x4F /* Same as MX29LV040C */ +#define MACRONIX_MX29LV081 0x38 +#define MACRONIX_MX29LV128DB 0x7A +#define MACRONIX_MX29LV128DT 0x7E +#define MACRONIX_MX29LV160DB 0x49 /* Same as MX29LV161DB/MX29LV160CB */ +#define MACRONIX_MX29LV160DT 0xC4 /* Same as MX29LV161DT/MX29LV160CT */ +#define MACRONIX_MX29LV320DB 0xA8 /* Same as MX29LV321DB */ +#define MACRONIX_MX29LV320DT 0xA7 /* Same as MX29LV321DT */ +#define MACRONIX_MX29LV400B 0xBA /* Same as MX29LV400CB */ +#define MACRONIX_MX29LV400T 0xB9 /* Same as MX29LV400CT */ +#define MACRONIX_MX29LV640DB 0xCB /* Same as MX29LV640EB */ +#define MACRONIX_MX29LV640DT 0xC9 /* Same as MX29LV640ET */ +#define MACRONIX_MX29LV800B 0x5B /* Same as MX29LV800CB */ +#define MACRONIX_MX29LV800T 0xDA /* Same as MX29LV800CT */ +#define MACRONIX_MX29SL402CB 0xF1 +#define MACRONIX_MX29SL402CT 0x70 +#define MACRONIX_MX29SL800CB 0x6B /* Same as MX29SL802CB */ +#define MACRONIX_MX29SL800CT 0xEA /* Same as MX29SL802CT */ /* * Programmable Micro Corp is listed in JEP106W in bank 2, so it should @@ -360,22 +360,22 @@ */ #define PMC_ID 0x7F9D /* PMC */ #define PMC_ID_NOPREFIX 0x9D /* PMC, missing 0x7F prefix */ -#define PMC_25LV512 0x7B -#define PMC_25LV010 0x7C -#define PMC_25LV020 0x7D -#define PMC_25LV040 0x7E -#define PMC_25LV080B 0x13 -#define PMC_25LV016B 0x14 -#define PMC_29F002T 0x1D -#define PMC_29F002B 0x2D -#define PMC_39LV512 0x1B -#define PMC_39F010 0x1C /* Same as Pm39LV010 */ -#define PMC_39LV020 0x3D -#define PMC_39LV040 0x3E -#define PMC_39F020 0x4D -#define PMC_39F040 0x4E -#define PMC_49FL002 0x6D -#define PMC_49FL004 0x6E +#define PMC_PM25LV512 0x7B +#define PMC_PM25LV010 0x7C +#define PMC_PM25LV020 0x7D +#define PMC_PM25LV040 0x7E +#define PMC_PM25LV080B 0x13 +#define PMC_PM25LV016B 0x14 +#define PMC_PM29F002T 0x1D +#define PMC_PM29F002B 0x2D +#define PMC_PM39LV512 0x1B +#define PMC_PM39F010 0x1C /* Same as Pm39LV010 */ +#define PMC_PM39LV020 0x3D +#define PMC_PM39LV040 0x3E +#define PMC_PM39F020 0x4D +#define PMC_PM39F040 0x4E +#define PMC_PM49FL002 0x6D +#define PMC_PM49FL004 0x6E /* * The Sanyo chip found so far uses SPI, first byte is manufacture code, @@ -408,63 +408,63 @@ * byte of device ID is related to log(bitsize) at least for some chips. */ #define SST_ID 0xBF /* SST */ -#define SST_25WF512 0x2501 -#define SST_25WF010 0x2502 -#define SST_25WF020 0x2503 -#define SST_25WF040 0x2504 -#define SST_25VF512A_REMS 0x48 /* REMS or RES opcode */ -#define SST_25VF010_REMS 0x49 /* REMS or RES opcode */ -#define SST_25VF020_REMS 0x43 /* REMS or RES opcode */ -#define SST_25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ -#define SST_25VF040B 0x258D -#define SST_25VF040B_REMS 0x8D /* REMS or RES opcode */ -#define SST_25VF080_REMS 0x80 /* REMS or RES opcode */ -#define SST_25VF080B 0x258E -#define SST_25VF080B_REMS 0x8E /* REMS or RES opcode */ -#define SST_25VF016B 0x2541 -#define SST_25VF032B 0x254A -#define SST_25VF032B_REMS 0x4A /* REMS or RES opcode */ -#define SST_25VF064C 0x254B -#define SST_26VF016 0x2601 -#define SST_26VF032 0x2602 -#define SST_27SF512 0xA4 -#define SST_27SF010 0xA5 -#define SST_27SF020 0xA6 -#define SST_27VF010 0xA9 -#define SST_27VF020 0xAA -#define SST_28SF040 0x04 -#define SST_29EE512 0x5D -#define SST_29EE010 0x07 -#define SST_29LE010 0x08 /* Same as SST29VE010 */ -#define SST_29EE020A 0x10 /* Same as SST29EE020 */ -#define SST_29LE020 0x12 /* Same as SST29VE020 */ -#define SST_29SF020 0x24 -#define SST_29VF020 0x25 -#define SST_29SF040 0x13 -#define SST_29VF040 0x14 -#define SST_39SF512 0xB4 -#define SST_39SF010 0xB5 -#define SST_39SF020 0xB6 /* Same as 39SF020A */ -#define SST_39SF040 0xB7 -#define SST_39VF512 0xD4 -#define SST_39VF010 0xD5 -#define SST_39VF020 0xD6 /* Same as 39LF020 */ -#define SST_39VF040 0xD7 /* Same as 39LF040 */ -#define SST_39VF080 0xD8 /* Same as 39LF080/39VF080/39VF088 */ -#define SST_49LF040B 0x50 -#define SST_49LF040 0x51 -#define SST_49LF020 0x61 -#define SST_49LF020A 0x52 -#define SST_49LF030A 0x1C -#define SST_49LF080A 0x5B -#define SST_49LF002A 0x57 -#define SST_49LF003A 0x1B -#define SST_49LF004A 0x60 /* Same as 49LF004B */ -#define SST_49LF008A 0x5A -#define SST_49LF004C 0x54 -#define SST_49LF008C 0x59 -#define SST_49LF016C 0x5C -#define SST_49LF160C 0x4C +#define SST_SST25WF512 0x2501 +#define SST_SST25WF010 0x2502 +#define SST_SST25WF020 0x2503 +#define SST_SST25WF040 0x2504 +#define SST_SST25VF512A_REMS 0x48 /* REMS or RES opcode */ +#define SST_SST25VF010_REMS 0x49 /* REMS or RES opcode */ +#define SST_SST25VF020_REMS 0x43 /* REMS or RES opcode */ +#define SST_SST25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ +#define SST_SST25VF040B 0x258D +#define SST_SST25VF040B_REMS 0x8D /* REMS or RES opcode */ +#define SST_SST25VF080_REMS 0x80 /* REMS or RES opcode */ +#define SST_SST25VF080B 0x258E +#define SST_SST25VF080B_REMS 0x8E /* REMS or RES opcode */ +#define SST_SST25VF016B 0x2541 +#define SST_SST25VF032B 0x254A +#define SST_SST25VF032B_REMS 0x4A /* REMS or RES opcode */ +#define SST_SST25VF064C 0x254B +#define SST_SST26VF016 0x2601 +#define SST_SST26VF032 0x2602 +#define SST_SST27SF512 0xA4 +#define SST_SST27SF010 0xA5 +#define SST_SST27SF020 0xA6 +#define SST_SST27VF010 0xA9 +#define SST_SST27VF020 0xAA +#define SST_SST28SF040 0x04 +#define SST_SST29EE512 0x5D +#define SST_SST29EE010 0x07 +#define SST_SST29LE010 0x08 /* Same as SST29VE010 */ +#define SST_SST29EE020A 0x10 /* Same as SST29EE020 */ +#define SST_SST29LE020 0x12 /* Same as SST29VE020 */ +#define SST_SST29SF020 0x24 +#define SST_SST29VF020 0x25 +#define SST_SST29SF040 0x13 +#define SST_SST29VF040 0x14 +#define SST_SST39SF512 0xB4 +#define SST_SST39SF010 0xB5 +#define SST_SST39SF020 0xB6 /* Same as 39SF020A */ +#define SST_SST39SF040 0xB7 +#define SST_SST39VF512 0xD4 +#define SST_SST39VF010 0xD5 +#define SST_SST39VF020 0xD6 /* Same as 39LF020 */ +#define SST_SST39VF040 0xD7 /* Same as 39LF040 */ +#define SST_SST39VF080 0xD8 /* Same as 39LF080/39VF080/39VF088 */ +#define SST_SST49LF040B 0x50 +#define SST_SST49LF040 0x51 +#define SST_SST49LF020 0x61 +#define SST_SST49LF020A 0x52 +#define SST_SST49LF030A 0x1C +#define SST_SST49LF080A 0x5B +#define SST_SST49LF002A 0x57 +#define SST_SST49LF003A 0x1B +#define SST_SST49LF004A 0x60 /* Same as 49LF004B */ +#define SST_SST49LF008A 0x5A +#define SST_SST49LF004C 0x54 +#define SST_SST49LF008C 0x59 +#define SST_SST49LF016C 0x5C +#define SST_SST49LF160C 0x4C /* * ST25P chips are SPI, first byte of device ID is memory type, second Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed Sep 15 16:47:56 2010 (r1174) +++ trunk/spi25.c Thu Sep 16 01:31:03 2010 (r1175) @@ -530,7 +530,7 @@ ((flash->model_id & 0xff00) == 0x2500)) spi_prettyprint_status_register_st_m25p(status); break; - case MX_ID: + case MACRONIX_ID: if ((flash->model_id & 0xff00) == 0x2000) spi_prettyprint_status_register_st_m25p(status); break;

1 0

Re: [flashrom] Write succes for Tyan Thunder K8WE s2895 with flashrom v0.9.2-r1001 and chip SSTFL49080A
by Michael Karcher 15 Sep '10

15 Sep '10

Am Mittwoch, den 15.09.2010, 20:14 +0200 schrieb STEMMELIN, FREDERIC (FREDERIC)** CTR **: > NOT WORKING is writing from original Tyan BIOS image (Error: Image > size doesn't match, 2895V106.wph, > ftp://ftp.tyan.com/bios/S2895_v106.zip) This is normal for phoenix images (flashed by winphlash or phlash16), because these images have code containing board and chip specific update functions appended to the flash image. Taking only the first 1048576 bytes of that file using e.g. head or dd is known to generally work on phoenix BIOSes Regards, Michael Karcher

1 0

Write succes for Tyan Thunder K8WE s2895 with flashrom v0.9.2-r1001 and chip SSTFL49080A
by STEMMELIN, FREDERIC (FREDERIC)** CTR ** 15 Sep '10

15 Sep '10

Hello, i received today my 2 new SST chips for the Tyan S2895 mobo with BIOS version 1.06 alreday flashed by BIOSMAN company. For a quick summary, what is working and what not: WORKING is chip read, and write with flashrom dumpped image NOT WORKING is writing from original Tyan BIOS image (Error: Image size doesn't match, 2895V106.wph, ftp://ftp.tyan.com/bios/S2895_v106.zip) So, what have a done exactly: - used flashrom v0.9.2-r1001 on Ubuntu to dump my current original bios SSTFL49080A with official 1.06 bios version flashed with propriarity tool provided by Tyan company. - md5sum of this dump => 4c3cc932a149e8bf496160814d0a9c74 - powered computer down - replaced original chip with one from BIOSMAN, same SST reference, with bios 1.06 on it (biosman has flashed the chip for me with lastest available bios version 1.06, not myself) - power on computer with biosman chip inside - used flashrom to dump biosman version of 1.06 - md5sum of the biosman 1.06 version => 18ede76905b99e4591122c5a3032bb2b - used flashrom to write original bios from tyan website (files 2895V105.wph or 2895V106.wph) => FAILED with incorrect size error message - used flashrom to write dump made with flashrom from original tyan bios chip => SUCCES (see file: flashrom_Vw_SST-49FL080A_TYAN_s2895_K8WE-flashrom_burn_from_original_tyanchip106_dump.txt) - md5sum after successfull flashing => 4c3cc932a149e8bf496160814d0a9c74 md5sum gives me insurance that dumping flash chip content from first chip and burning to another chip (after computer power down/up to replace chip) is the same, so write function is working pretty The only thing that it is not working is to flash from tyan bios downloaded version (.wph files), as their siez are bigger. Bios SIZE: dump with flashrom => 1048576 bytes ; original Tyan bios file 2895V106.wph => 1050070 bytes I have not tried the erase function so far. Computer seems to work fine so far (Ubuntu gnome), with all bioses version, before and after flashing, bios menu are ok too. Have a nice evening. PS: file flashrom_Vw_SST-49FL080A_TYAN_s2895_K8WE-tyan105origtry1.txt is to show you siez error while trying flashing Tyan original wph bios files (version 105, but same for 106). File names wre truncated by Windows webmail :(

1 0

[commit] r1174 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: hailfinger Date: Wed Sep 15 16:47:56 2010 New Revision: 1174 URL: http://flashrom.org/trac/flashrom/changeset/1174 Log: Add chipset enable for Broadcom OSB4. No docs available. Signed-off-by: Joshua Roys <roysjosh(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipset_enable.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Wed Sep 15 14:02:07 2010 (r1173) +++ trunk/chipset_enable.c Wed Sep 15 16:47:56 2010 (r1174) @@ -802,6 +802,23 @@ return 0; } +static int enable_flash_osb4(struct pci_dev *dev, const char *name) +{ + uint8_t tmp; + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + tmp = INB(0xc06); + tmp |= 0x1; + OUTB(tmp, 0xc06); + + tmp = INB(0xc6f); + tmp |= 0x40; + OUTB(tmp, 0xc6f); + + return 0; +} + /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */ static int enable_flash_sb400(struct pci_dev *dev, const char *name) { @@ -1008,6 +1025,7 @@ {0x1002, 0x439d, OK, "AMD", "SB700/SB710/SB750", enable_flash_sb600}, {0x100b, 0x0510, NT, "AMD", "SC1100", enable_flash_sc1100}, {0x1002, 0x4377, OK, "ATI", "SB400", enable_flash_sb400}, + {0x1166, 0x0200, OK, "Broadcom", "OSB4", enable_flash_osb4}, {0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000}, {0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_ich10}, {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_ich10},

1 0

[PATCH] SB700 IMC: refuse to write
by Carl-Daniel Hailfinger 15 Sep '10

15 Sep '10

AMD SB700 and later have an integrated microcontroller (IMC) which runs from shared flash. The IMC will happily issue reads while we write, issue writes while we read, and generally cause lots of havoc due to the concurrent accesses it performs while flashrom is running. A failing or corrupted read can be detected since r1145, and the worst case is that the read aborts and the user has to retry. A failing write is much more serious. It can be detected since r1145, but if the SPI interface locks up, we can't continue writing nor can we read the current chip contents. If the IMC is inactive, there is no reason to worry. If the IMC is active, flashrom will refuse to erase/write the chip with this patch. The correct fix would be to stop the IMC during flashing, but apparently the relevant registers are undocumented, so we take the safe route for now until someone from AMD can give us more info. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-sb700_imc_refuse_write/sb600spi.c =================================================================== --- flashrom-sb700_imc_refuse_write/sb600spi.c (Revision 1171) +++ flashrom-sb700_imc_refuse_write/sb600spi.c (Arbeitskopie) @@ -294,6 +294,24 @@ return 0; } + reg = pci_read_byte(dev, 0x40); + msg_pdbg("SB700 IMC is %sactive.\n", (tmp & (1 << 7)) ? "" : "not "); + if (tmp & (1 << 7)) { + /* If we touch any region used by the IMC, the IMC and the SPI + * interface will lock up, and the only way to recover is a + * hard reset, but that is a bad choice for a half-erased or + * half-written flash chip. + * There appears to be an undocumented register which can freeze + * or disable the IMC, but for now we want to play it safe. + */ + msg_perr("The SB700 IMC is active and may interfere with SPI " + "commands. Disabling write.\n"); + /* FIXME: Should we only disable SPI writes, or will the lockup + * affect LPC/FWH chips as well? + */ + programmer_may_write = 0; + } + /* Bring the FIFO to a clean state. */ reset_internal_fifo_pointer(); -- http://www.hailfinger.org/

3 5

[commit] r1173 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: hailfinger Date: Wed Sep 15 14:02:07 2010 New Revision: 1173 URL: http://flashrom.org/trac/flashrom/changeset/1173 Log: AMD SB700 and later have an integrated microcontroller (IMC) which runs from shared flash. The IMC will happily issue reads while we write, issue writes while we read, and generally cause lots of havoc due to the concurrent accesses it performs while flashrom is running. A failing or corrupted read can be detected since r1145, and the worst case is that the read aborts and the user has to retry. A failing write is much more serious. It can be detected since r1145, but if the SPI interface locks up, we can't continue writing nor can we read the current chip contents. If the IMC is inactive, there is no reason to worry. If the IMC is active, flashrom will refuse to erase/write the chip with this patch. The correct fix would be to stop the IMC during flashing, but apparently the relevant registers are undocumented, so we take the safe route for now until someone from AMD can give us more info. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested-by: Matthias Kretz <kretz(a)kde.org> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/sb600spi.c Modified: trunk/sb600spi.c ============================================================================== --- trunk/sb600spi.c Wed Sep 15 12:20:16 2010 (r1172) +++ trunk/sb600spi.c Wed Sep 15 14:02:07 2010 (r1173) @@ -294,6 +294,24 @@ return 0; } + reg = pci_read_byte(dev, 0x40); + msg_pdbg("SB700 IMC is %sactive.\n", (reg & (1 << 7)) ? "" : "not "); + if (reg & (1 << 7)) { + /* If we touch any region used by the IMC, the IMC and the SPI + * interface will lock up, and the only way to recover is a + * hard reset, but that is a bad choice for a half-erased or + * half-written flash chip. + * There appears to be an undocumented register which can freeze + * or disable the IMC, but for now we want to play it safe. + */ + msg_perr("The SB700 IMC is active and may interfere with SPI " + "commands. Disabling write.\n"); + /* FIXME: Should we only disable SPI writes, or will the lockup + * affect LPC/FWH chips as well? + */ + programmer_may_write = 0; + } + /* Bring the FIFO to a clean state. */ reset_internal_fifo_pointer();

1 0

[PATCH] Delay between probe and subsequent operations
by Carl-Daniel Hailfinger 15 Sep '10

15 Sep '10

Delay between probe and subsequent operations. Some flash chips need time to exit ID mode, and while we take care of correct timing for the matching probe, subsequent probes may have totally different timing, and that can lead to garbage responses from the flash chip during the first accesses after the probe sequence is done. Delay 100 ms between the last probe and any subsequent operation. To ensure maximum correctness, we would have to reset the chip first in case the last probe function left the chip in an undefined (non-read) state. That will be possible once struct flashchip has a .reset function. This fixes unstable erase/read/write for some flahs chips on nic3com and possible other use cases as well. Thanks to Maciej Pijanka for reporting the issue and testing patches. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-delay_after_probes/cli_classic.c =================================================================== --- flashrom-delay_after_probes/cli_classic.c (Revision 1171) +++ flashrom-delay_after_probes/cli_classic.c (Arbeitskopie) @@ -456,5 +456,10 @@ if (write_it && !dont_verify_it) verify_it = 1; + /* FIXME: We should issue an unconditional chip reset here. This can be + * done once we have a .reset function in struct flashchip. + * Give the chip time to settle. + */ + programmer_delay(100000); return doit(flash, force, filename, read_it, write_it, erase_it, verify_it); } -- http://www.hailfinger.org/

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom