- flashrom - mail.coreboot.org

Re: [flashrom] [coreboot] Tester devices [was: QA contribution]
by Carl-Daniel Hailfinger 17 Feb '11

17 Feb '11

Hi Juhana, I've added the flashrom mailing list to CC. Auf 12.02.2011 19:55, Juhana Helovuo schrieb: > Now there is more progress. After some building, coding, and debugging > I have the tester sort-of-working. > > The first version of the hardware works. > > In this image you can see the tester plugged into an Asus mainboard: > > http://alpskari.asiantuntijat.org/~juhe/in-system-flasher/DSC08430.jpg > > Today I successfully used this setup to reflash the mainboard from the > host PC via flashrom. > > The USB cable goes to a host computer, which is running a modified > flashrom program. The flashrom is extended with a serprog_spi module, > which can transfer SPI over the serprog protocol, and additionally > toggle SPI bus multiplexer between the MCU and mainboard at the > beginning and end of programming. > > The tester hardware has the following features: > > * Tester can access the ROM also when disconnected from the target > mainboard. > > The work is still quite incomplete: > > * Currently there is no tester firmware that could operate both the > SPI and RS-232. The main problem is that the AT90USB162 > microcontroller supports only up to five USB endpoints (including > default control EP). I do not know if it is possible to implement two > USB CDC class virtual serial ports with less than seven EPs. With two > serial ports, one could represent the RS-232 interface, and other be > used to control the programmer without writing any custom USB drivers. > > This could be solved either in software by writing a custom USB driver > for both the tester and the host, or in hardware by replacing the > microcontroller with a more capable model. If anyone on the list can > suggest any easier solutions, I'd be glad to hear about them. > > * The handling of SPI ROM is horribly slow. Programming and verifying > 1 MByte ROM takes about half an hour. The main suspect is nonexistent > USB data buffering in the tester firmware. There are a few tricks we could use to speed up SPI programming with your hardware. flashrom already supports the Dediprog SF100 USB-based SPI programmer, and that works well. Maybe we could use a similar communication protocol, and/or use a serprog-like protocol directly on top of libusb without the need of serial port emulation. The serial port emulation is probably the biggest reason why anything is slow. If you tell me about the design constraints of your device, I can probably come up with a flashrom driver which can reflash an 1 MByte ROM in ~5 minutes or so. That will require some cooperation from your device, but should be doable with ~270 bytes of RAM. Even with ~140 bytes of RAM we should be able to get some decent performance. As long as we can optimize the protocol, it should be possible to get acceptable performance even with only 50 bytes of RAM, but generally more RAM will give you better performance. Side note: I think there once was a SPI-serprog design on the flashrom mailing list, but I can't find it right now. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[PATCH] Support 64-bit MEM BARs
by Carl-Daniel Hailfinger 15 Feb '11

15 Feb '11

Support 64-bit MEM BARs wherever possible. Add more sanity checks for BARs and abort if resources are unreachable. Undecoded resources are reported, but flashrom will proceed anyway just in case the BIOS screwed up the configuration. (The empty CardBus handler is intentional, according to the spec no BARs in PCI config space are used by CardBus.) Verbose logs (and tests) with PCI-based external programmers would be highly appreciated. I spotted this while working on a driver for a PCIe-based SSD which has 64-bit capable MEM BARs. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-64bit_membar/pcidev.c =================================================================== --- flashrom-64bit_membar/pcidev.c (Revision 1257) +++ flashrom-64bit_membar/pcidev.c (Arbeitskopie) @@ -2,6 +2,7 @@ * This file is part of the flashrom project. * * Copyright (C) 2009 Uwe Hermann <uwe(a)hermann-uwe.de> + * Copyright (C) 2010, 2011 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,43 +28,151 @@ struct pci_access *pacc; struct pci_dev *pcidev_dev = NULL; -uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, +enum pci_bartype { + TYPE_MEMBAR, + TYPE_IOBAR, + TYPE_ROMBAR, + TYPE_UNKNOWN +}; + +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs) { int i; - /* FIXME: 64 bit memory BARs need a 64 bit addr. */ - uint32_t addr; + uint64_t addr; + uint32_t upperaddr; + uint8_t headertype; + uint16_t supported_cycles; + enum pci_bartype bartype = TYPE_UNKNOWN; for (i = 0; devs[i].device_name != NULL; i++) { if (dev->device_id != devs[i].device_id) continue; + msg_pinfo("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", + devs[i].vendor_name, devs[i].device_name, + dev->vendor_id, dev->device_id, dev->bus, dev->dev, + dev->func); + + headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; + msg_pspew("PCI header type 0x%02x\n", headertype); + /* * Don't use dev->base_addr[x] (as value for 'bar'), won't * work on older libpci. */ addr = pci_read_long(dev, bar); - - msg_pinfo("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", - devs[i].vendor_name, devs[i].device_name, - dev->vendor_id, dev->device_id, dev->bus, dev->dev, - dev->func); - msg_pdbg("Requested BAR is %s", (addr & 0x1) ? "IO" : "MEM"); - if (addr & 0x1) { - /* Mask off IO space indicator and reserved bit. */ - msg_pdbg("\n"); - addr &= ~0x3; - } else { + + /* Sanity checks. */ + switch (headertype) { + case PCI_HEADER_TYPE_NORMAL: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_BRIDGE: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS1: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_CARDBUS: + break; + default: + msg_perr("Unknown PCI header type 0x%02x, BAR type " + "cannot be determined reliably.\n", headertype); + break; + } + + supported_cycles = pci_read_word(dev, PCI_COMMAND); + + msg_pdbg("Requested BAR is "); + switch (bartype) { + case TYPE_MEMBAR: + msg_pdbg("MEM"); + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } msg_pdbg(", %sbit, %sprefetchable\n", ((addr & 0x6) == 0x0) ? "32" : (((addr & 0x6) == 0x4) ? "64" : "reserved"), (addr & 0x8) ? "" : "not "); - /* Mask off Mem space indicator, 32/64bit type indicator - * and Prefetchable indicator. - */ - addr &= ~0xf; + if ((addr & 0x6) == 0x4) { + /* The spec says that a 64-bit register consumes + * two subsequent dword locations. + */ + upperaddr = pci_read_long(dev, bar + 4); + if (upperaddr != 0x00000000) { + /* Fun! A real 64-bit resource. */ + if (sizeof(uintptr_t) != sizeof(uint64_t)) { + msg_perr("BAR unreachable!"); + /* TODO: Really abort here? If + * multiple PCI devices match, + * we might never tell the user + * about the other devices. + */ + return 0; + } + addr |= (uint64_t)upperaddr << 32; + } + } + addr &= PCI_BASE_ADDRESS_MEM_MASK; + break; + case TYPE_IOBAR: + msg_pdbg("I/O\n"); +#if __FLASHROM_HAVE_OUTB__ + if (!(supported_cycles & PCI_COMMAND_IO)) { + msg_perr("I/O BAR access requested, but device " + "has I/O space accesses disabled.\n"); + /* TODO: Abort here? */ + } +#else + msg_perr("I/O BAR access requested, but flashrom does " + "not support I/O BAR access on this platform " + "(yet).\n"); +#endif + addr &= PCI_BASE_ADDRESS_IO_MASK; + break; + case TYPE_ROMBAR: + msg_pdbg("ROM\n"); + /* Not sure if this check is needed. */ + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } + addr &= PCI_ROM_ADDRESS_MASK; + break; + case TYPE_UNKNOWN: + msg_perr("BAR type unknown, please report a bug at " + "flashrom(a)flashrom.org\n"); } - + if (devs[i].status == NT) { msg_pinfo("===\nThis PCI device is UNTESTED. Please " "report the 'flashrom -p xxxx' output \n" @@ -73,13 +182,13 @@ "your help!\n===\n"); } - return addr; + return (uintptr_t)addr; } return 0; } -uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs) { struct pci_dev *dev; @@ -87,7 +196,7 @@ char *pcidev_bdf; char *msg = NULL; int found = 0; - uint32_t addr = 0, curaddr = 0; + uintptr_t addr = 0, curaddr = 0; pacc = pci_alloc(); /* Get the pci_access structure */ pci_init(pacc); /* Initialize the PCI library */ Index: flashrom-64bit_membar/programmer.h =================================================================== --- flashrom-64bit_membar/programmer.h (Revision 1257) +++ flashrom-64bit_membar/programmer.h (Arbeitskopie) @@ -216,8 +216,8 @@ const char *vendor_name; const char *device_name; }; -uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, const struct pcidev_status *devs); -uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, const struct pcidev_status *devs); +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs); +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs); /* rpci_write_* are reversible writes. The original PCI config space register * contents will be restored on shutdown. */ -- http://www.hailfinger.org/

2 2

[commit] r1261 - trunk
by repository service 15 Feb '11

15 Feb '11

Author: hailfinger Date: Tue Feb 15 23:44:27 2011 New Revision: 1261 URL: http://flashrom.org/trac/flashrom/changeset/1261 Log: Support 64-bit MEM BARs wherever possible. Add more sanity checks for BARs and abort if resources are unreachable. Undecoded resources are reported, but flashrom will proceed anyway just in case the BIOS screwed up the configuration. (The empty CardBus handler is intentional, according to the spec no BARs in PCI config space are used by CardBus.) Found while working on a driver for the Angelbird PCIe-based SSD which has 64-bit capable MEM BARs. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Modified: trunk/pcidev.c trunk/programmer.h Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Sat Feb 5 13:11:17 2011 (r1260) +++ trunk/pcidev.c Tue Feb 15 23:44:27 2011 (r1261) @@ -2,6 +2,7 @@ * This file is part of the flashrom project. * * Copyright (C) 2009 Uwe Hermann <uwe(a)hermann-uwe.de> + * Copyright (C) 2010, 2011 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,43 +28,151 @@ struct pci_access *pacc; struct pci_dev *pcidev_dev = NULL; -uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, +enum pci_bartype { + TYPE_MEMBAR, + TYPE_IOBAR, + TYPE_ROMBAR, + TYPE_UNKNOWN +}; + +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs) { int i; - /* FIXME: 64 bit memory BARs need a 64 bit addr. */ - uint32_t addr; + uint64_t addr; + uint32_t upperaddr; + uint8_t headertype; + uint16_t supported_cycles; + enum pci_bartype bartype = TYPE_UNKNOWN; for (i = 0; devs[i].device_name != NULL; i++) { if (dev->device_id != devs[i].device_id) continue; + msg_pinfo("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", + devs[i].vendor_name, devs[i].device_name, + dev->vendor_id, dev->device_id, dev->bus, dev->dev, + dev->func); + + headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; + msg_pspew("PCI header type 0x%02x\n", headertype); + /* * Don't use dev->base_addr[x] (as value for 'bar'), won't * work on older libpci. */ addr = pci_read_long(dev, bar); - - msg_pinfo("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", - devs[i].vendor_name, devs[i].device_name, - dev->vendor_id, dev->device_id, dev->bus, dev->dev, - dev->func); - msg_pdbg("Requested BAR is %s", (addr & 0x1) ? "IO" : "MEM"); - if (addr & 0x1) { - /* Mask off IO space indicator and reserved bit. */ - msg_pdbg("\n"); - addr &= ~0x3; - } else { + + /* Sanity checks. */ + switch (headertype) { + case PCI_HEADER_TYPE_NORMAL: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_BRIDGE: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS1: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_CARDBUS: + break; + default: + msg_perr("Unknown PCI header type 0x%02x, BAR type " + "cannot be determined reliably.\n", headertype); + break; + } + + supported_cycles = pci_read_word(dev, PCI_COMMAND); + + msg_pdbg("Requested BAR is "); + switch (bartype) { + case TYPE_MEMBAR: + msg_pdbg("MEM"); + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } msg_pdbg(", %sbit, %sprefetchable\n", ((addr & 0x6) == 0x0) ? "32" : (((addr & 0x6) == 0x4) ? "64" : "reserved"), (addr & 0x8) ? "" : "not "); - /* Mask off Mem space indicator, 32/64bit type indicator - * and Prefetchable indicator. - */ - addr &= ~0xf; + if ((addr & 0x6) == 0x4) { + /* The spec says that a 64-bit register consumes + * two subsequent dword locations. + */ + upperaddr = pci_read_long(dev, bar + 4); + if (upperaddr != 0x00000000) { + /* Fun! A real 64-bit resource. */ + if (sizeof(uintptr_t) != sizeof(uint64_t)) { + msg_perr("BAR unreachable!"); + /* TODO: Really abort here? If + * multiple PCI devices match, + * we might never tell the user + * about the other devices. + */ + return 0; + } + addr |= (uint64_t)upperaddr << 32; + } + } + addr &= PCI_BASE_ADDRESS_MEM_MASK; + break; + case TYPE_IOBAR: + msg_pdbg("I/O\n"); +#if __FLASHROM_HAVE_OUTB__ + if (!(supported_cycles & PCI_COMMAND_IO)) { + msg_perr("I/O BAR access requested, but device " + "has I/O space accesses disabled.\n"); + /* TODO: Abort here? */ + } +#else + msg_perr("I/O BAR access requested, but flashrom does " + "not support I/O BAR access on this platform " + "(yet).\n"); +#endif + addr &= PCI_BASE_ADDRESS_IO_MASK; + break; + case TYPE_ROMBAR: + msg_pdbg("ROM\n"); + /* Not sure if this check is needed. */ + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } + addr &= PCI_ROM_ADDRESS_MASK; + break; + case TYPE_UNKNOWN: + msg_perr("BAR type unknown, please report a bug at " + "flashrom(a)flashrom.org\n"); } - + if (devs[i].status == NT) { msg_pinfo("===\nThis PCI device is UNTESTED. Please " "report the 'flashrom -p xxxx' output \n" @@ -73,13 +182,13 @@ "your help!\n===\n"); } - return addr; + return (uintptr_t)addr; } return 0; } -uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs) { struct pci_dev *dev; @@ -87,7 +196,7 @@ char *pcidev_bdf; char *msg = NULL; int found = 0; - uint32_t addr = 0, curaddr = 0; + uintptr_t addr = 0, curaddr = 0; pacc = pci_alloc(); /* Get the pci_access structure */ pci_init(pacc); /* Initialize the PCI library */ Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Feb 5 13:11:17 2011 (r1260) +++ trunk/programmer.h Tue Feb 15 23:44:27 2011 (r1261) @@ -219,8 +219,8 @@ const char *vendor_name; const char *device_name; }; -uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, const struct pcidev_status *devs); -uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, const struct pcidev_status *devs); +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs); +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs); /* rpci_write_* are reversible writes. The original PCI config space register * contents will be restored on shutdown. */

1 0

Intel NIC flashrom fail
by Антон Кочков 15 Feb '11

15 Feb '11

flashrom -r INTEL.ROM -p nicintel_spi:pci=02:0B.0 -VV flashrom v0.9.3-r1250 on MS-DOS 8 (i786), built with libpci 3.1.5, GCC 4.3.2, little endian flashrom is free software, get the source code at flashrom.org Calibrating delay loop... OS timer resolution is 50000 usecs, 1589M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 200000 myus = 220000 us, OK. Initializing nicintel_spi programmer ERROR: No supported PCI device found lspci output: http://paste.flashrom.org/view.php?id=347 vendor flash tool: http://paste.flashrom.org/view.php?id=348 Best regards, Anton Kochkov.

2 1

Read/Fast Read chip status sheet (re-send)
by Steven Zakulec 12 Feb '11

12 Feb '11

(I'm re-sending this now because carldani asked if I could re-send it after FOSDEM). Hi, here's a copy of the sheet I created covering most of the chips (it's the same chip list as in my previous list- the form factor & voltage one). If I couldn't figure out whether the chip had read/fast read, I left it blank. Otherwise, I filled in on the sheet the instruction code, any notes, and whether the mode(s) on the datasheet were the ones Flashrom wanted.

3 3

mx25l8005 write report
by Alec Wright 12 Feb '11

12 Feb '11

Apparently it's been marked as untested again

1 0

EVGA nForce 780i Revised
by Brandon Dowdy 10 Feb '11

10 Feb '11

Manufacturer: EVGA Model: nForce 780i Super I/O: Winbond W83627DHG Flash chip: SST SST49LF080A Southbridge: NVIDIA MCP55 I don't know what the northbridge for the board is, so that's one more thing to find before coreboot fully supports it. acpidump output included. P.S. Sorry if the email is too big like the last one. And also, The only difference is that the logs are updated and some more logs are added.

1 0

Re: [flashrom] Vortex86 based machines
by Антон Кочков 10 Feb '11

10 Feb '11

Full developer manual and additional information available here http://www.dmp.com.tw/tech/vortex86dx/ 2011/2/10 Антон Кочков <anton.kochkov(a)gmail.com>: > Here an suggestion of some cheap nettop. > It use SPI flash and winbond super i/o. > Attached log of proprietary utility and documentation (software > reference manual) > > original spiflash utility (for DOS) can be downloaded here > http://rghost.net/4282595 > > -- > Best regards, > Anton Kochkov. > -- Best regards, Anton Kochkov.

1 0

FAILED: Asus P5NSLI
by Alvaro Aguilera 06 Feb '11

06 Feb '11

Hello, I'm trying to update the BIOS of a P5NSLI board but the procedure failed. Any hints on how to correct this? Thanks, Alvaro.

2 2

Flashrom Winbond W25Q64 Erase and write support works
by Юшаков Дмитрий 06 Feb '11

06 Feb '11

Hello, flashrom team. I just flashed on my P5Q deluxe motherboard with ICH10R SB EPPROM from my new ASRock p67 extreme4 board, it's Winbond W25Q64. In your support table it's '?' for erase and write, so it works greatly. Thank you for your util. But some binaries for dos can save time for users and increase popularity for you utility. That was too hard for me to install latest version on Ubuntu live USB. Best regards!

1 0

[PATCH] Add support for AMD Am29LV00*
by Carl-Daniel Hailfinger 05 Feb '11

05 Feb '11

Add support for AMD Am29LV001BB, Am29LV001BT, Am29LV002BB, Am29LV002BT, Am29LV004BB, Am29LV004BT, Am29LV008BB, Am29LV008BT Mark, could you please update a clean tree to latest flashrom (which has the Angelbird SSD support) and apply this patch on top? It should recognize your flash chip, and allow read/write/erase without the need to specify -f. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-am29lv00x/flashchips.c =================================================================== --- flashrom-am29lv00x/flashchips.c (Revision 1258) +++ flashrom-am29lv00x/flashchips.c (Arbeitskopie) @@ -224,6 +224,252 @@ { .vendor = "AMD", + .name = "Am29LV001BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BB, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 1}, + {4 * 1024, 2}, + {16 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV001BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BT, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 7}, + {4 * 1024, 2}, + {8 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV002BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BB, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV002BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BT, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV004BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BB, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV004BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BT, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV008BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BB, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV008BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BT, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", .name = "Am29LV040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, Index: flashrom-am29lv00x/flashchips.h =================================================================== --- flashrom-am29lv00x/flashchips.h (Revision 1258) +++ flashrom-am29lv00x/flashchips.h (Arbeitskopie) @@ -70,6 +70,8 @@ #define AMD_AM29F400BT 0x23 #define AMD_AM29F800BB 0x58 #define AMD_AM29F800BT 0xD6 +#define AMD_AM29LV001BB 0x6D +#define AMD_AM29LV001BT 0xED #define AMD_AM29LV002BB 0xC2 #define AMD_AM29LV002BT 0x40 #define AMD_AM29LV004BB 0xB6 -- http://www.hailfinger.org/

2 2

[commit] r1260 - trunk
by repository service 05 Feb '11

05 Feb '11

Author: hailfinger Date: Sat Feb 5 13:11:17 2011 New Revision: 1260 URL: http://flashrom.org/trac/flashrom/changeset/1260 Log: Add support for AMD Am29LV001BB, Am29LV001BT, Am29LV002BB, Am29LV002BT, Am29LV004BB, Am29LV004BT, Am29LV008BB, Am29LV008BT Thanks to Mark Pustjens for testing the Am29LV001BB. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Feb 4 23:52:04 2011 (r1259) +++ trunk/flashchips.c Sat Feb 5 13:11:17 2011 (r1260) @@ -224,6 +224,252 @@ { .vendor = "AMD", + .name = "Am29LV001BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BB, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 1}, + {4 * 1024, 2}, + {16 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV001BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BT, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 7}, + {4 * 1024, 2}, + {8 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV002BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BB, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV002BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BT, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV004BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BB, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV004BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BT, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV008BB", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BB, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", + .name = "Am29LV008BT", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BT, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "AMD", .name = "Am29LV040B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMD_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Feb 4 23:52:04 2011 (r1259) +++ trunk/flashchips.h Sat Feb 5 13:11:17 2011 (r1260) @@ -70,6 +70,8 @@ #define AMD_AM29F400BT 0x23 #define AMD_AM29F800BB 0x58 #define AMD_AM29F800BT 0xD6 +#define AMD_AM29LV001BB 0x6D +#define AMD_AM29LV001BT 0xED #define AMD_AM29LV002BB 0xC2 #define AMD_AM29LV002BT 0x40 #define AMD_AM29LV004BB 0xB6

1 0

Giada N3, flashrom -Vr
by Tristan Plumb 05 Feb '11

05 Feb '11

Note, I have a few of these and soldering skills, and will happily test writing to the flash if so desired. The dumped rom is valid. flashrom v0.9.3-r1258 on Linux 2.6.27.8 (i686), built with libpci 2.2.10, GCC 4.2.4, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 3 usecs, 798M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10021 us, 12 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASL" DMI string baseboard-product-name: "MCP7A-ION" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79", enabling flash write... chipset PCI ID is 10de:0aad, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI Found SMBus device 10de:0aa2 at 00:03:2 MCP SPI BAR is at 0xfae80000 SPI control is 0xc052, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL004A, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF010.REMS, 128 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V040FB, 512 KB: skipped. Probing for Winbond W39V040FC, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xef, id2 0x13 === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done.

1 0

[commit] r1259 - trunk
by repository service 04 Feb '11

04 Feb '11

Author: hailfinger Date: Fri Feb 4 23:52:04 2011 New Revision: 1259 URL: http://flashrom.org/trac/flashrom/changeset/1259 Log: Improve debugging for unaligned erase in the flash chip emulator. Fix out-of-bounds access for chip erase in the flash chip emulator. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/dummyflasher.c Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Fri Feb 4 22:37:59 2011 (r1258) +++ trunk/dummyflasher.c Fri Feb 4 23:52:04 2011 (r1259) @@ -395,7 +395,7 @@ } offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; if (offs & (emu_jedec_se_size - 1)) - msg_pdbg("Unaligned SECTOR ERASE 0x20\n"); + msg_pdbg("Unaligned SECTOR ERASE 0x20: 0x%x\n", offs); offs &= ~(emu_jedec_se_size - 1); memset(flashchip_contents + offs, 0xff, emu_jedec_se_size); break; @@ -412,7 +412,7 @@ } offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; if (offs & (emu_jedec_be_52_size - 1)) - msg_pdbg("Unaligned BLOCK ERASE 0x52\n"); + msg_pdbg("Unaligned BLOCK ERASE 0x52: 0x%x\n", offs); offs &= ~(emu_jedec_be_52_size - 1); memset(flashchip_contents + offs, 0xff, emu_jedec_be_52_size); break; @@ -429,7 +429,7 @@ } offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; if (offs & (emu_jedec_be_d8_size - 1)) - msg_pdbg("Unaligned BLOCK ERASE 0xd8\n"); + msg_pdbg("Unaligned BLOCK ERASE 0xd8: 0x%x\n", offs); offs &= ~(emu_jedec_be_d8_size - 1); memset(flashchip_contents + offs, 0xff, emu_jedec_be_d8_size); break; @@ -444,12 +444,9 @@ msg_perr("CHIP ERASE 0x60 insize invalid!\n"); return 1; } - offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; - if (offs & (emu_jedec_ce_60_size - 1)) - msg_pdbg("Unaligned CHIP ERASE 0x60\n"); - offs &= ~(emu_jedec_ce_60_size - 1); + /* JEDEC_CE_60_OUTSIZE is 1 (no address) -> no offset. */ /* emu_jedec_ce_60_size is emu_chip_size. */ - memset(flashchip_contents + offs, 0xff, emu_jedec_ce_60_size); + memset(flashchip_contents, 0xff, emu_jedec_ce_60_size); break; case JEDEC_CE_C7: if (!emu_jedec_ce_c7_size) @@ -462,10 +459,7 @@ msg_perr("CHIP ERASE 0xc7 insize invalid!\n"); return 1; } - offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; - if (offs & (emu_jedec_ce_c7_size - 1)) - msg_pdbg("Unaligned CHIP ERASE 0xc7\n"); - offs &= ~(emu_jedec_ce_c7_size - 1); + /* JEDEC_CE_C7_OUTSIZE is 1 (no address) -> no offset. */ /* emu_jedec_ce_c7_size is emu_chip_size. */ memset(flashchip_contents, 0xff, emu_jedec_ce_c7_size); break;

1 0

[PATCH] Support for Angelbird Wings PCIe SSD, Marvell 88SX7042
by Carl-Daniel Hailfinger 04 Feb '11

04 Feb '11

Support for Angelbird Wings PCIe SSD (solid-state drive). It uses a Marvell 88SX7042 SATA controller internally which has access to a separate flash chip hosting the option ROM. Thanks to Angelbird Ltd for sponsoring development of this driver! I expect the code to work for that SATA controller even if it is not part of the Angelbird SSD. Note: The controller has 64-bit BARs which may be mapped outside the 32-bit (4 GB) address space. A separate patch has been sent to fix that code. Tested on hardware. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-marvell/satamv.c =================================================================== --- flashrom-marvell/satamv.c (Revision 0) +++ flashrom-marvell/satamv.c (Revision 0) @@ -0,0 +1,183 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010,2011 Carl-Daniel Hailfinger + * Written by Carl-Daniel Hailfinger for Angelbird Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Datasheets are not public (yet?) */ + +#include <stdlib.h> +#include "flash.h" +#include "programmer.h" + +uint8_t *mv_bar; +uint16_t mv_iobar; + +const struct pcidev_status satas_mv[] = { + /* 88SX6041 and 88SX6042 are the same according to the datasheet. */ + {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"}, + + {}, +}; + +#define NVRAM_PARAM 0x1045c +#define FLASH_PARAM 0x1046c +#define EXPANSION_ROM_BAR_CONTROL 0x00d2c +#define PCI_BAR2_CONTROL 0x00c08 +#define GPIO_PORT_CONTROL 0x104f0 + +/* + * Random notes: + * FCE# Flash Chip Enable + * FWE# Flash Write Enable + * FOE# Flash Output Enable + * FALE[1:0] Flash Address Latch Enable + * FAD[7:0] Flash Multiplexed Address/Data Bus + * FA[2:0] Flash Address Low + * + * GPIO[15,2] GPIO Port Mode + * GPIO[4:3] Flash Size + * + * 0xd2c Expansion ROM BAR Control + * 0xc08 PCI BAR2 (Flash/NVRAM) Control + * 0x1046c Flash Parameters + */ +int satamv_init(void) +{ + uintptr_t addr; + uint32_t tmp; + + get_io_perms(); + + /* BAR0 has all internal registers memory mapped. */ + /* No need to check for errors, pcidev_init() will not return in case + * of errors. + */ + addr = pcidev_init(0x11ab, PCI_BASE_ADDRESS_0, satas_mv); + + mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000); + if (mv_bar == ERROR_PTR) + goto error_out; + + tmp = pci_mmio_readl(mv_bar + FLASH_PARAM); + msg_pspew("Flash Parameters:\n"); + msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7); + msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf); + msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf); + msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7); + msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7); + msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7); + msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3); + msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1); + msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1); + msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1); + msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1); + msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1); + msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1); + msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf); + + tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL); + msg_pspew("Expansion ROM BAR Control:\n"); + msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7); + + /* Enable BAR2 mapping to flash */ + tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL); + msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n"); + msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1); + msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f); + msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7); + tmp &= 0xffffffc0; + tmp |= 0x0000001f; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL); + + /* Enable flash: GPIO Port Control Register 0x104f0 */ + tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL); + msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3); + if (((tmp >> 0) & 0x3) != 0x2) + msg_pinfo("Warning! Either the straps are incorrect or you " + "have no flash or someone overwrote the strap " + "values!\n"); + tmp &= 0xfffffffc; + tmp |= 0x2; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL); + + /* Get I/O BAR location. */ + tmp = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) & + PCI_BASE_ADDRESS_IO_MASK; + /* Truncate to reachable range. + * FIXME: Check if the I/O BAR is actually reachable. + * This is an arch specific check. + */ + mv_iobar = tmp & 0xffff; + msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + /* 512 kByte with two 8-bit latches, and + * 4 MByte with additional 3-bit latch. */ + max_rom_decode.parallel = 4 * 1024 * 1024; + + return 0; + +error_out: + pci_cleanup(pacc); + release_io_perms(); + return 1; +} + +int satamv_shutdown(void) +{ + physunmap(mv_bar, 0x20000); + pci_cleanup(pacc); + release_io_perms(); + return 0; +} + +/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function. + * If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O). + * This code only supports indirect accesses for now. + */ + +/* Indirect access to via the I/O BAR1. */ +static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + OUTB(val, mv_iobar + 0x80 + (addr & 0x3)); +} + +/* Indirect access to via the I/O BAR1. */ +static uint8_t satamv_indirect_chip_readb(const chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + return INB(mv_iobar + 0x80 + (addr & 0x3)); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +void satamv_chip_writeb(uint8_t val, chipaddr addr) +{ + satamv_indirect_chip_writeb(val, addr); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +uint8_t satamv_chip_readb(const chipaddr addr) +{ + return satamv_indirect_chip_readb(addr); +} Index: flashrom-marvell/Makefile =================================================================== --- flashrom-marvell/Makefile (Revision 1257) +++ flashrom-marvell/Makefile (Arbeitskopie) @@ -155,6 +155,9 @@ # Disable Dediprog SF100 until support is complete and tested. CONFIG_DEDIPROG ?= no +# Always enable Marvell SATA controllers for now. +CONFIG_SATAMV ?= yes + # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no @@ -283,6 +286,12 @@ PROGRAMMER_OBJS += dediprog.o endif +ifeq ($(CONFIG_SATAMV), yes) +FEATURE_CFLAGS += -D'CONFIG_SATAMV=1' +PROGRAMMER_OBJS += satamv.o +NEED_PCI := yes +endif + ifeq ($(NEED_SERIAL), yes) LIB_OBJS += serial.o endif Index: flashrom-marvell/print_wiki.c =================================================================== --- flashrom-marvell/print_wiki.c (Revision 1257) +++ flashrom-marvell/print_wiki.c (Arbeitskopie) @@ -302,6 +302,9 @@ #if CONFIG_OGP_SPI == 1 print_supported_pcidevs_wiki(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + print_supported_pcidevs_wiki(satas_mv); +#endif printf("\n|}\n"); } Index: flashrom-marvell/flashrom.c =================================================================== --- flashrom-marvell/flashrom.c (Revision 1257) +++ flashrom-marvell/flashrom.c (Arbeitskopie) @@ -52,7 +52,7 @@ * if more than one of them is selected. If only one is selected, it is clear * that the user wants that one to become the default. */ -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI > 1 +#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV > 1 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one. #endif enum programmer programmer = @@ -99,6 +99,9 @@ #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV +#endif ; #endif @@ -461,6 +464,25 @@ }, #endif +#if CONFIG_SATAMV == 1 + { + .name = "satamv", + .init = satamv_init, + .shutdown = satamv_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = satamv_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satamv_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; Index: flashrom-marvell/programmer.h =================================================================== --- flashrom-marvell/programmer.h (Revision 1257) +++ flashrom-marvell/programmer.h (Arbeitskopie) @@ -79,6 +79,9 @@ #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI, #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -415,6 +418,15 @@ extern const struct pcidev_status ogp_spi[]; #endif +/* satamv.c */ +#if CONFIG_SATAMV == 1 +int satamv_init(void); +int satamv_shutdown(void); +void satamv_chip_writeb(uint8_t val, chipaddr addr); +uint8_t satamv_chip_readb(const chipaddr addr); +extern const struct pcidev_status satas_mv[]; +#endif + /* satasii.c */ #if CONFIG_SATASII == 1 int satasii_init(void); Index: flashrom-marvell/print.c =================================================================== --- flashrom-marvell/print.c (Revision 1257) +++ flashrom-marvell/print.c (Arbeitskopie) @@ -317,6 +317,11 @@ programmer_table[PROGRAMMER_OGP_SPI].name); print_supported_pcidevs(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_SATAMV].name); + print_supported_pcidevs(satas_mv); +#endif } #if CONFIG_INTERNAL == 1 -- http://www.hailfinger.org/

3 5

[commit] r1258 - trunk
by repository service 04 Feb '11

04 Feb '11

Author: hailfinger Date: Fri Feb 4 22:37:59 2011 New Revision: 1258 URL: http://flashrom.org/trac/flashrom/changeset/1258 Log: Support for Angelbird Wings PCIe SSD (solid-state drive). It uses a Marvell 88SX7042 SATA controller internally which has access to a separate flash chip hosting the option ROM. Thanks to Angelbird Ltd for sponsoring development of this driver! I expect the code to work for that SATA controller even if it is not part of the Angelbird SSD. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Added: trunk/satamv.c Modified: trunk/Makefile trunk/flashrom.c trunk/print.c trunk/print_wiki.c trunk/programmer.h Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Jan 28 10:00:15 2011 (r1257) +++ trunk/Makefile Fri Feb 4 22:37:59 2011 (r1258) @@ -155,6 +155,9 @@ # Disable Dediprog SF100 until support is complete and tested. CONFIG_DEDIPROG ?= no +# Always enable Marvell SATA controllers for now. +CONFIG_SATAMV ?= yes + # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no @@ -283,6 +286,12 @@ PROGRAMMER_OBJS += dediprog.o endif +ifeq ($(CONFIG_SATAMV), yes) +FEATURE_CFLAGS += -D'CONFIG_SATAMV=1' +PROGRAMMER_OBJS += satamv.o +NEED_PCI := yes +endif + ifeq ($(NEED_SERIAL), yes) LIB_OBJS += serial.o endif Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Fri Jan 28 10:00:15 2011 (r1257) +++ trunk/flashrom.c Fri Feb 4 22:37:59 2011 (r1258) @@ -52,7 +52,7 @@ * if more than one of them is selected. If only one is selected, it is clear * that the user wants that one to become the default. */ -#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI > 1 +#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_NICNATSEMI+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG+CONFIG_RAYER_SPI+CONFIG_NICINTEL_SPI+CONFIG_OGP_SPI+CONFIG_SATAMV > 1 #error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one. #endif enum programmer programmer = @@ -99,6 +99,9 @@ #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV +#endif ; #endif @@ -461,6 +464,25 @@ }, #endif +#if CONFIG_SATAMV == 1 + { + .name = "satamv", + .init = satamv_init, + .shutdown = satamv_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = satamv_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = satamv_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Jan 28 10:00:15 2011 (r1257) +++ trunk/print.c Fri Feb 4 22:37:59 2011 (r1258) @@ -317,6 +317,11 @@ programmer_table[PROGRAMMER_OGP_SPI].name); print_supported_pcidevs(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + printf("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_SATAMV].name); + print_supported_pcidevs(satas_mv); +#endif } #if CONFIG_INTERNAL == 1 Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Fri Jan 28 10:00:15 2011 (r1257) +++ trunk/print_wiki.c Fri Feb 4 22:37:59 2011 (r1258) @@ -302,6 +302,9 @@ #if CONFIG_OGP_SPI == 1 print_supported_pcidevs_wiki(ogp_spi); #endif +#if CONFIG_SATAMV == 1 + print_supported_pcidevs_wiki(satas_mv); +#endif printf("\n|}\n"); } Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Fri Jan 28 10:00:15 2011 (r1257) +++ trunk/programmer.h Fri Feb 4 22:37:59 2011 (r1258) @@ -79,6 +79,9 @@ #if CONFIG_OGP_SPI == 1 PROGRAMMER_OGP_SPI, #endif +#if CONFIG_SATAMV == 1 + PROGRAMMER_SATAMV, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -415,6 +418,15 @@ extern const struct pcidev_status ogp_spi[]; #endif +/* satamv.c */ +#if CONFIG_SATAMV == 1 +int satamv_init(void); +int satamv_shutdown(void); +void satamv_chip_writeb(uint8_t val, chipaddr addr); +uint8_t satamv_chip_readb(const chipaddr addr); +extern const struct pcidev_status satas_mv[]; +#endif + /* satasii.c */ #if CONFIG_SATASII == 1 int satasii_init(void); Added: trunk/satamv.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/satamv.c Fri Feb 4 22:37:59 2011 (r1258) @@ -0,0 +1,183 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2010,2011 Carl-Daniel Hailfinger + * Written by Carl-Daniel Hailfinger for Angelbird Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Datasheets are not public (yet?) */ + +#include <stdlib.h> +#include "flash.h" +#include "programmer.h" + +uint8_t *mv_bar; +uint16_t mv_iobar; + +const struct pcidev_status satas_mv[] = { + /* 88SX6041 and 88SX6042 are the same according to the datasheet. */ + {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"}, + + {}, +}; + +#define NVRAM_PARAM 0x1045c +#define FLASH_PARAM 0x1046c +#define EXPANSION_ROM_BAR_CONTROL 0x00d2c +#define PCI_BAR2_CONTROL 0x00c08 +#define GPIO_PORT_CONTROL 0x104f0 + +/* + * Random notes: + * FCE# Flash Chip Enable + * FWE# Flash Write Enable + * FOE# Flash Output Enable + * FALE[1:0] Flash Address Latch Enable + * FAD[7:0] Flash Multiplexed Address/Data Bus + * FA[2:0] Flash Address Low + * + * GPIO[15,2] GPIO Port Mode + * GPIO[4:3] Flash Size + * + * 0xd2c Expansion ROM BAR Control + * 0xc08 PCI BAR2 (Flash/NVRAM) Control + * 0x1046c Flash Parameters + */ +int satamv_init(void) +{ + uintptr_t addr; + uint32_t tmp; + + get_io_perms(); + + /* BAR0 has all internal registers memory mapped. */ + /* No need to check for errors, pcidev_init() will not return in case + * of errors. + */ + addr = pcidev_init(0x11ab, PCI_BASE_ADDRESS_0, satas_mv); + + mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000); + if (mv_bar == ERROR_PTR) + goto error_out; + + tmp = pci_mmio_readl(mv_bar + FLASH_PARAM); + msg_pspew("Flash Parameters:\n"); + msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7); + msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf); + msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf); + msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7); + msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7); + msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7); + msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3); + msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1); + msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1); + msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1); + msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1); + msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1); + msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1); + msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf); + + tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL); + msg_pspew("Expansion ROM BAR Control:\n"); + msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7); + + /* Enable BAR2 mapping to flash */ + tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL); + msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n"); + msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1); + msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f); + msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7); + tmp &= 0xffffffc0; + tmp |= 0x0000001f; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL); + + /* Enable flash: GPIO Port Control Register 0x104f0 */ + tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL); + msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3); + if (((tmp >> 0) & 0x3) != 0x2) + msg_pinfo("Warning! Either the straps are incorrect or you " + "have no flash or someone overwrote the strap " + "values!\n"); + tmp &= 0xfffffffc; + tmp |= 0x2; + /* FIXME: This needs to be an auto-reversible write. */ + pci_mmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL); + + /* Get I/O BAR location. */ + tmp = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) & + PCI_BASE_ADDRESS_IO_MASK; + /* Truncate to reachable range. + * FIXME: Check if the I/O BAR is actually reachable. + * This is an arch specific check. + */ + mv_iobar = tmp & 0xffff; + msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar); + + buses_supported = CHIP_BUSTYPE_PARALLEL; + + /* 512 kByte with two 8-bit latches, and + * 4 MByte with additional 3-bit latch. */ + max_rom_decode.parallel = 4 * 1024 * 1024; + + return 0; + +error_out: + pci_cleanup(pacc); + release_io_perms(); + return 1; +} + +int satamv_shutdown(void) +{ + physunmap(mv_bar, 0x20000); + pci_cleanup(pacc); + release_io_perms(); + return 0; +} + +/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function. + * If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O). + * This code only supports indirect accesses for now. + */ + +/* Indirect access to via the I/O BAR1. */ +static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + OUTB(val, mv_iobar + 0x80 + (addr & 0x3)); +} + +/* Indirect access to via the I/O BAR1. */ +static uint8_t satamv_indirect_chip_readb(const chipaddr addr) +{ + /* 0x80000000 selects BAR2 for remapping. */ + OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar); + return INB(mv_iobar + 0x80 + (addr & 0x3)); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +void satamv_chip_writeb(uint8_t val, chipaddr addr) +{ + satamv_indirect_chip_writeb(val, addr); +} + +/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */ +uint8_t satamv_chip_readb(const chipaddr addr) +{ + return satamv_indirect_chip_readb(addr); +}

1 0

[PATCH 1/1] Board-enable for GA-K8N51GMF
by Michael Karcher 04 Feb '11

04 Feb '11

(VERIFIED to contain the right patch) Gigabyte is not really helpful with their PCI IDs for us, the subsystem IDs used just mean "gigabyte northbridge" and "gigabyte southbridge". We should investigate whether autodetection of this board is causing interference with other boards. real version 2: Extend list of PCI IDs for nvidia southbridges. flashrom -V: http://paste.flashrom.org/view.php?id=326 lspic: http://paste.flashrom.org/view.php?id=328 superiotool: http://paste.flashrom.org/view.php?id=329 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 5 ++++- print.c | 1 + 2 files changed, 5 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 5776bf5..75adc9e 100644 --- a/board_enable.c +++ b/board_enable.c @@ -866,6 +866,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) case 0x00E0: /* CK8 */ break; case 0x0260: /* MCP51 */ + case 0x0261: /* MCP51 */ case 0x0364: /* MCP55 */ /* find SMBus controller on *this* southbridge */ /* The infamous Tyan S2915-E has two south bridges; they are @@ -1026,7 +1027,8 @@ static int nvidia_mcp_gpio31_raise(void) /* * Suited for: - * - GIGABYTE GA-K8N51GMF-9 + * - GIGABYTE GA-K8N51GMF: Socket 754 + Geforce 6100 + MCP51 + * - GIGABYTE GA-K8N51GMF-9: Socket 939 + Geforce 6100 + MCP51 */ static int nvidia_mcp_gpio3b_raise(void) { @@ -1938,6 +1940,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, + {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, diff --git a/print.c b/print.c index 7ba2801..01a32c6 100644 --- a/print.c +++ b/print.c @@ -476,6 +476,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), -- 1.7.2.3

1 0

[PATCH 1/1] Board-enable for GA-K8N51GMF
by Michael Karcher 04 Feb '11

04 Feb '11

(this time *really* the updated patch!) Gigabyte is not really helpful with their PCI IDs for us, the subsystem IDs used just mean "gigabyte northbridge" and "gigabyte southbridge". We should investigate whether autodetection of this board is causing interference with other boards. version 2: Extend list of PCI IDs for nvidia southbridges. flashrom -V: http://paste.flashrom.org/view.php?id=326 lspic: http://paste.flashrom.org/view.php?id=328 superiotool: http://paste.flashrom.org/view.php?id=329 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 4 +++- print.c | 1 + 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 5776bf5..4b9c515 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1026,7 +1026,8 @@ static int nvidia_mcp_gpio31_raise(void) /* * Suited for: - * - GIGABYTE GA-K8N51GMF-9 + * - GIGABYTE GA-K8N51GMF: Socket 754 + Geforce 6100 + MCP51 + * - GIGABYTE GA-K8N51GMF-9: Socket 939 + Geforce 6100 + MCP51 */ static int nvidia_mcp_gpio3b_raise(void) { @@ -1938,6 +1939,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, + {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, diff --git a/print.c b/print.c index 7ba2801..01a32c6 100644 --- a/print.c +++ b/print.c @@ -476,6 +476,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), -- 1.7.2.3

1 0

CR-48 help
by Brian Davis 04 Feb '11

04 Feb '11

Do you have any experience with the cr-48 and hexxeh's script?

2 1

MICRO-STAR MS-6378(VT8361) write success
by Michael Kotschi 04 Feb '11

04 Feb '11

root@wopr:~/tmp# flashrom -Vw W6378VMS.350 flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string system-product-name: "MS-6378" DMI string system-version: " " DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-6378(VT8361)" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "VIA VT82C686A/B", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 315M loops per second, 100 myus = 199 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Found chip "PMC Pm29F002T" (256 KB, Parallel) at physical address 0xfffc0000. Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x3e Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x9d, id2 0x1d Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x9d, id2 0x1d Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x01ffff, 0x020000-0x037fff, 0x038000-0x039fff, 0x03a000-0x03bfff, 0x03c000-0x03ffff, SUCCESS. Programming page: address: 0x0003f000 COMPLETE. -- ========================================================= |Michael Kotschi |Internet: mkotschi(a)voxmicro.net| |VoxMicro LLC |Phone: (321) 473-6379 ext 101 | |Managing Partner | | =========================================================

1 0

[PATCH 1/1] Board-enable for GA-K8N51GMF
by Michael Karcher 03 Feb '11

03 Feb '11

Gigabyte is not really helpful with their PCI IDs for us, the subsystem IDs used just mean "gigabyte northbridge" and "gigabyte southbridge". We should investigate whether autodetection of this board is causing interference with other boards. version 2: Extend list of PCI IDs for nvidia southbridges. flashrom -V: http://paste.flashrom.org/view.php?id=326 lspic: http://paste.flashrom.org/view.php?id=328 superiotool: http://paste.flashrom.org/view.php?id=329 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 4 +++- print.c | 1 + 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 5776bf5..4b9c515 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1026,7 +1026,8 @@ static int nvidia_mcp_gpio31_raise(void) /* * Suited for: - * - GIGABYTE GA-K8N51GMF-9 + * - GIGABYTE GA-K8N51GMF: Socket 754 + Geforce 6100 + MCP51 + * - GIGABYTE GA-K8N51GMF-9: Socket 939 + Geforce 6100 + MCP51 */ static int nvidia_mcp_gpio3b_raise(void) { @@ -1938,6 +1939,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, + {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, diff --git a/print.c b/print.c index 7ba2801..01a32c6 100644 --- a/print.c +++ b/print.c @@ -476,6 +476,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), -- 1.7.2.3

1 0

Asus P3V4x flashrom cant found flash chip
by XVilka Haos of System 03 Feb '11

03 Feb '11

Asus P3V4x VIA Apollo Pro 133A chipset VT82C694X & VT82C596B This board have Mosel Vitelic V29C51002T flash Output of flashrom: http://paste.flashrom.org/view.php?id=335 Output of lspci http://paste.flashrom.org/view.php?id=337 Original BIOS image ftp://ftp.asus.com/pub/ASUS/mb/slot1/pro133a/p3v4x/pv4x1064.zip 13:11:39.29: Chipset detected: VIA Apollo Pro (Plus/133(A|T)) [ASUS FLASH] 13:11:40.50: CMOS size detected: 256b 13:11:40.66: Found DMI 2.3 board info: ASUSTeK Computer INC. P3V4X REV 1.xx 13:11:41.10: Detected Award BIOS ID: P3V4X -- Best regards, XVilka.

1 1

MSI Speedster A4R/V MS-9632 write success
by Julian Scheel 02 Feb '11

02 Feb '11

$ sudo flashrom -Vw Downloads/w9632ims140/w9632ims.140 flashrom v0.9.3-r1257 on Linux 2.6.37-ARCH (x86_64), built with libpci 3.1.7, GCC 4.5.2 20110127 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1966M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 987 us, 10000 myus = 10946 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string system-product-name: "MS-9632" DMI string system-version: "1.3" DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-9632" DMI string baseboard-version: "1.3" DMI string chassis-type: "Desktop" Found chipset "Intel ICH7/ICH7R", enabling flash write... chipset PCI ID is 8086:27b8, 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x400c64: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x3 (LPC) Top Swap : not enabled OK. This chipset supports the following protocols: FWH. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A25L512, 64 KB: skipped. Probing for AMIC A25L010, 128 KB: skipped. Probing for AMIC A25L020, 256 KB: skipped. Probing for AMIC A25L040, 512 KB: skipped. Probing for AMIC A25L080, 1024 KB: skipped. Probing for AMIC A25L016, 2048 KB: skipped. Probing for AMIC A25L032, 4096 KB: skipped. Probing for AMIC A25LQ032, 4096 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF081A, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25DQ161, 2048 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for Bright BM29F040, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Hyundai HY29F040A, 512 KB: skipped. Probing for Intel 28F001BN/BX-B, 128 KB: skipped. Probing for Intel 28F001BN/BX-T, 128 KB: skipped. Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped. Probing for Intel 28F008S3/S5/SC, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped. Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped. Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L1635E, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29F040, 512 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for Spansion S25FL032A, 4096 KB: skipped. Probing for Spansion S25FL064A, 8192 KB: skipped. Probing for SST SST25VF010.REMS, 128 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M25PX32, 4096 KB: skipped. Probing for ST M25PX64, 8192 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x43, id2 0x9f, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x1d, id2 0xa6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped. Probing for Winbond W29C040/P, 512 KB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FB, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Found chip "Winbond W39V040FB" (512 KB, FWH) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0x00000000 is Full Access. Lock status of block at 0x00010000 is Full Access. Lock status of block at 0x00020000 is Full Access. Lock status of block at 0x00030000 is Full Access. Lock status of block at 0x00040000 is Full Access. Lock status of block at 0x00050000 is Full Access. Lock status of block at 0x00060000 is Full Access. Lock status of block at 0x00070000 is Full Access. Probing for Winbond W39V040FC, 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U/N, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA, 1024 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_jedec_common: id1 0xda, id2 0x54 Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for Eon unknown Eon SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Flash image seems to be a legacy BIOS. Disabling checks. Reading old flash chip contents... Erasing and writing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S Done. Verifying flash... VERIFIED.

1 0

[RFC + PATCH] lock command for flashrom
by Mathias Krause 02 Feb '11

02 Feb '11

Hi, flashrom currently tries to unlock the chip before each read/write/erase command. To prevent further modifications of the chip content, e.g. for security reasons, it would be helpful if flashrom would also be capable of the opposite operation. I talked with Carl-Daniel a little about it and he mentioned problems like having to implement features like partial locks, chips that cannot be unlocked after being locked, etc. To support those features and handle the problematic chips something more than this little patch can do must be implemented. But for now it would be nice to have *something*. See it as a starting point to solve the much bigger problem. This patch adds a function pointer to struct flashchip and a command line option to trigger this function to enable full flash chip write protection. It's currently only implemented for the Atmel AT26DF081A since this is the chip I'm currently working with and which I can test easily. ToDo: Add man page documentation. Signed-off-by: Mathias Krause <mathias.krause(a)secunet.com>

2 4

[PATCH] Board-enable for GA-K8N51GMF
by Michael Karcher 02 Feb '11

02 Feb '11

Gigabyte is not really helpful with their PCI IDs for us, the subsystem IDs used just mean "gigabyte northbridge" and "gigabyte southbridge". We should investigate whether autodetection of this board is causing interference with other boards. flashrom -V: http://paste.flashrom.org/view.php?id=326 lspic: http://paste.flashrom.org/view.php?id=328 superiotool: http://paste.flashrom.org/view.php?id=329 Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 4 +++- print.c | 1 + 2 files changed, 4 insertions(+), 1 deletions(-) diff --git a/board_enable.c b/board_enable.c index 5776bf5..4b9c515 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1026,7 +1026,8 @@ static int nvidia_mcp_gpio31_raise(void) /* * Suited for: - * - GIGABYTE GA-K8N51GMF-9 + * - GIGABYTE GA-K8N51GMF: Socket 754 + Geforce 6100 + MCP51 + * - GIGABYTE GA-K8N51GMF-9: Socket 939 + Geforce 6100 + MCP51 */ static int nvidia_mcp_gpio3b_raise(void) { @@ -1938,6 +1939,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, OK, NULL}, {0x8086, 0x244b, 0x8086, 0x2442, 0x8086, 0x2445, 0x1458, 0xa002, NULL, NULL, NULL, "GIGABYTE", "GA-8IRML", 0, OK, intel_ich_gpio25_raise}, {0x8086, 0x24c3, 0x1458, 0x24c2, 0x8086, 0x24cd, 0x1458, 0x5004, NULL, NULL, NULL, "GIGABYTE", "GA-8PE667 Ultra 2", 0, OK, intel_ich_gpio32_raise}, + {0x10DE, 0x02F1, 0x1458, 0x5000, 0x10DE, 0x0261, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x026C, 0x1458, 0xA102, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, NULL, "GIGABYTE", "GA-K8N51GMF-9", 0, OK, nvidia_mcp_gpio3b_raise}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, OK, nvidia_mcp_gpio21_raise}, {0x1166, 0x0223, 0x103c, 0x320d, 0x14e4, 0x1678, 0x103c, 0x703e, NULL, "hp", "dl145_g3", "HP", "ProLiant DL145 G3", 0, OK, board_hp_dl145_g3_enable}, diff --git a/print.c b/print.c index 7ba2801..01a32c6 100644 --- a/print.c +++ b/print.c @@ -476,6 +476,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), + B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), B("GIGABYTE", "GA-K8N51GMF-9", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), B("GIGABYTE", "GA-M57SLI-S4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), B("GIGABYTE", "GA-M61P-S3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), -- 1.7.2.3

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom