- flashrom - mail.coreboot.org

Re: [flashrom] [PATCH] Make the laptop warning less scary if unsure
by Stefan Tauner 03 Sep '11

03 Sep '11

On Thu, 25 Aug 2011 14:56:56 +0200 Idwer Vollering <vidwer(a)gmail.com> wrote: > 2011/8/20 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > > Telling the user to use "force_I_want_a_brick" if it is not even a > > laptop, is a bit over-the-top. Introduce a new laptop parameter > > "this_is_not_a_laptop" that allows to force operation, but only if > > the detection is not sure. > > > > --- > > > > complicates the whole thing a bit. could do without the extra > > variable and new part of the if condition, if we allow the > > this_is_not_a_laptop parameter to always work, not only if the > > laptop detection is uncertain. it will be undocumented and only > > visible to the user together with the warning anyway... > > I was curious whether the currently present overriding parameter works > in combination with the parameter in this patch, and it does: $ sudo > ./flashrom -V -p internal:laptop=force_I_want_a_brick -p > internal:laptop=this_is_not_a_laptop > flashrom v0.9.4-r1418 on FreeBSD 9.0-BETA1 (i386), built with libpci > 3.1.7, GCC 4.2.2 20070831 prerelease [FreeBSD], little endian > (etcetera) > > Do you think this behaviour is desired? > the force_I_want_a_brick will override the other one (which is then neither used nor checked). i think that is ok... this is already way too sophisticated imho. :) but thanks for pointing it out, i have not thought about it yet. do you think this is a problem? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 4

ASUS P4XP-X
by Patrick Welche 03 Sep '11

03 Sep '11

Is there a newbies list? I thought I would attempt to upgrade the firmware of a SiI3124 SATALink PCI card plugged into a P4XP-X motherboard. Stage one seems to be to run flashrom -V (attached). It seems that P4XP-X isn't listed in flashrom -L, so maybe I could "test" somehow? How can I probe for the sata card? On another computer with an intel board, the intel supplied bios executable contains EV0482C.BIO and EV0482C.ITK. .BIO seems promising as "BIOS", but the .ITK looks as though it contains all the strings - presumably both files are necessary for an upgrade? Pointers to a FM welcome... Cheers, Patrick

3 2

Re: [flashrom] SuperMicro X8DTU-6TF+: flashrom -Vr failed
by Stefan Tauner 03 Sep '11

03 Sep '11

On Fri, 2 Sep 2011 08:15:45 -0500 Scott Silverman <ssilverman(a)simplexinvestments.com> wrote: > I can confirm that this particular board is the > X8DTU-6TF+<http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…>(with > the Intel 82599 based 10GbE interfaces onboard). oki, thanks! > I do not have any X8DTU-6F+, but I do have other X8DTx boards to test with, > including X8DTU-F, X8DTU-LN4F+, X8DTi-LN4F and X8DTH-iF. If you need data > from any of these boards, let me know. no, that is not necessary. i just wanted to be sure to have valid data in our database :) if you ever use flashrom on a yet untested board, we would be glad to get a log of course.. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1427 - trunk
by repository service 03 Sep '11

03 Sep '11

Author: uwe Date: Sat Sep 3 20:37:52 2011 New Revision: 1427 URL: http://flashrom.org/trac/flashrom/changeset/1427 Log: Add support for the Linux SPI subsystem (spidev). See http://www.kernel.org/doc/Documentation/spi/spidev for an introduction. Usage is as follows: flashrom -p linux_spi:dev=/dev/spidevX.Y where X is the bus number, and Y device. It accepts an optional parameter 'speed' which allows to set the SPI clock speed in kHz. Tested on an Atmel AVR32AP7000 board (NGW100 Network Gateway Kit), see below, which was used to program a ThinkPad X60, but it should work on every other Linux system, too. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102) Signed-off-by: Sven Schnelle <svens(a)stackframe.org> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Added: trunk/linux_spi.c Modified: trunk/Makefile trunk/flashrom.c trunk/programmer.h Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Sep 3 19:15:00 2011 (r1426) +++ trunk/Makefile Sat Sep 3 20:37:52 2011 (r1427) @@ -313,6 +313,10 @@ # Always enable Bus Pirate SPI for now. CONFIG_BUSPIRATE_SPI ?= yes +# Disable Linux spidev interface support for now, until we check for a Linux +# device (not host, as DOS binaries for example are built on a Linux host). +CONFIG_LINUX_SPI ?= no + # Disable Dediprog SF100 until support is complete and tested. CONFIG_DEDIPROG ?= no @@ -449,6 +453,11 @@ NEED_SERIAL := yes endif +ifeq ($(CONFIG_LINUX_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_LINUX_SPI=1' +PROGRAMMER_OBJS += linux_spi.o +endif + ifeq ($(CONFIG_DEDIPROG), yes) FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1' FEATURE_LIBS += -lusb Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sat Sep 3 19:15:00 2011 (r1426) +++ trunk/flashrom.c Sat Sep 3 20:37:52 2011 (r1427) @@ -104,6 +104,9 @@ #if CONFIG_SATAMV == 1 PROGRAMMER_SATAMV #endif +#if CONFIG_LINUX_SPI == 1 + PROGRAMMER_LINUX_SPI +#endif ; #endif @@ -447,6 +450,24 @@ .chip_writew = fallback_chip_writew, .chip_writel = fallback_chip_writel, .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + +#if CONFIG_LINUX_SPI == 1 + { + .name = "linux_spi", + .init = linux_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = noop_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = noop_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, .delay = internal_delay, }, #endif Added: trunk/linux_spi.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/linux_spi.c Sat Sep 3 20:37:52 2011 (r1427) @@ -0,0 +1,139 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <sys/fcntl.h> +#include <errno.h> +#include <ctype.h> +#include <unistd.h> +#include <linux/spi/spidev.h> +#include <sys/ioctl.h> +#include "flash.h" +#include "chipdrivers.h" +#include "programmer.h" +#include "spi.h" + +static int fd = -1; + +static int linux_spi_shutdown(void *data); +static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *txbuf, unsigned char *rxbuf); +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, + int len); +static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, + int start, int len); + +static const struct spi_programmer spi_programmer_linux = { + .type = SPI_CONTROLLER_LINUX, + .max_data_read = MAX_DATA_UNSPECIFIED, /* TODO? */ + .max_data_write = MAX_DATA_UNSPECIFIED, /* TODO? */ + .command = linux_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = linux_spi_read, + .write_256 = linux_spi_write_256, +}; + +int linux_spi_init(void) +{ + char *p, *endp, *dev; + int speed = 0; + + dev = extract_programmer_param("dev"); + if (!dev || !strlen(dev)) { + msg_perr("No SPI device given. Use flashrom -p " + "linux_spi:dev=/dev/spidevX.Y\n"); + return 1; + } + + p = extract_programmer_param("speed"); + if (p && strlen(p)) { + speed = strtoul(p, &endp, 10) * 1024; + if (p == endp) { + msg_perr("%s: invalid clock: %s kHz\n", __func__, p); + return 1; + } + } + + if ((fd = open(dev, O_RDWR)) == -1) { + msg_perr("%s: failed to open %s: %s\n", __func__, + dev, strerror(errno)); + return 1; + } + + if (speed > 0 && ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed) == -1) { + msg_perr("%s: failed to set speed %dHz: %s\n", + __func__, speed, strerror(errno)); + close(fd); + return 1; + } + + if (register_shutdown(linux_spi_shutdown, NULL)) + return 1; + + register_spi_programmer(&spi_programmer_linux); + + return 0; +} + +static int linux_spi_shutdown(void *data) +{ + if (fd != -1) { + close(fd); + fd = -1; + } + return 0; +} + +static int linux_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *txbuf, unsigned char *rxbuf) +{ + struct spi_ioc_transfer msg[2] = { + { + .tx_buf = (uint64_t)txbuf, + .len = writecnt, + }, + { + .rx_buf = (uint64_t)rxbuf, + .len = readcnt, + }, + }; + + if (fd == -1) + return -1; + + if (ioctl(fd, SPI_IOC_MESSAGE(2), msg) == -1) { + msg_cerr("%s: ioctl: %s\n", __func__, strerror(errno)); + return -1; + } + return 0; +} + +static int linux_spi_read(struct flashchip *flash, uint8_t *buf, int start, + int len) +{ + return spi_read_chunked(flash, buf, start, len, getpagesize()); +} + +static int linux_spi_write_256(struct flashchip *flash, uint8_t *buf, + int start, int len) +{ + return spi_write_chunked(flash, buf, start, len, getpagesize() - 4); +} Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Sep 3 19:15:00 2011 (r1426) +++ trunk/programmer.h Sat Sep 3 20:37:52 2011 (r1427) @@ -79,6 +79,9 @@ #if CONFIG_SATAMV == 1 PROGRAMMER_SATAMV, #endif +#if CONFIG_LINUX_SPI == 1 + PROGRAMMER_LINUX_SPI, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -485,6 +488,11 @@ int buspirate_spi_init(void); #endif +/* linux_spi.c */ +#if CONFIG_LINUX_SPI == 1 +int linux_spi_init(void); +#endif + /* dediprog.c */ #if CONFIG_DEDIPROG == 1 int dediprog_init(void); @@ -536,6 +544,9 @@ #if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) SPI_CONTROLLER_BITBANG, #endif +#if CONFIG_LINUX_SPI == 1 + SPI_CONTROLLER_LINUX, +#endif }; extern const int spi_programmer_count;

1 0

[commit] r1426 - trunk
by repository service 03 Sep '11

03 Sep '11

Author: uwe Date: Sat Sep 3 19:15:00 2011 New Revision: 1426 URL: http://flashrom.org/trac/flashrom/changeset/1426 Log: Introduce ERROR_FATAL, abort upon failed chipset enables. Signed-off-by: Tadas Slotkus <devtadas(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/chipset_enable.c trunk/flash.h trunk/internal.c Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sat Sep 3 13:22:27 2011 (r1425) +++ trunk/chipset_enable.c Sat Sep 3 19:15:00 2011 (r1426) @@ -1325,6 +1325,10 @@ msg_pinfo("OK.\n"); else if (ret == ERROR_NONFATAL) msg_pinfo("PROBLEMS, continuing anyway\n"); + if (ret == ERROR_FATAL) { + msg_perr("FATAL ERROR!\n"); + return ret; + } } s = flashbuses_to_text(buses_supported); Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sat Sep 3 13:22:27 2011 (r1425) +++ trunk/flash.h Sat Sep 3 19:15:00 2011 (r1426) @@ -224,9 +224,12 @@ #define OK 0 #define NT 1 /* Not tested */ -/* Something happened that shouldn't happen, but we can go on */ +/* Something happened that shouldn't happen, but we can go on. */ #define ERROR_NONFATAL 0x100 +/* Something happened that shouldn't happen, we'll abort. */ +#define ERROR_FATAL -0xee + /* cli_output.c */ /* Let gcc and clang check for correct printf-style format strings. */ int print(int type, const char *fmt, ...) __attribute__((format(printf, 2, 3))); Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Sat Sep 3 13:22:27 2011 (r1425) +++ trunk/internal.c Sat Sep 3 19:15:00 2011 (r1426) @@ -268,7 +268,8 @@ if (ret == -2) { msg_perr("WARNING: No chipset found. Flash detection " "will most likely fail.\n"); - } + } else if (ret == ERROR_FATAL) + return ret; #if defined(__i386__) || defined(__x86_64__) /* Probe unconditionally for IT87* LPC->SPI translation and for

1 0

Flashrom & Intel DH67CF
by Matthijs van Aalten 03 Sep '11

03 Sep '11

Hi, Can you tell me if it is (mostly) safe to use Flashrom 0.9.4 on my Intel DH67CF main board? The log doesn't make it clear how risky it is to flash. I've attached the 'flashrom -V' log file. What makes me afraid to try: Warning messages in the log file: "WARNING: BIOS region SMM protection is enabled!" "tried to set 0xdc to 0x23 on H67 failed (WARNING ONLY)" "WARNING: SPI Configuration Lockdown activated." ... is all a bit too technical but not very positive. I've downloaded the latest BIOS for this mainboard and flashed it from the BIOS utility itself (file used: BL0128P.BIO). Then I did a verify job with Flashrom - ideally it should read the flash memory and report it equal to the downloaded file: > flashrom -v BL0128P.BIO flashrom v0.9.4-r1395 on Linux 3.0.0 (x86_64), built with libpci 3.1.7, GCC 4.4.5, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel H67". This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... WARNING: BIOS region SMM protection is enabled! tried to set 0xdc to 0x23 on H67 failed (WARNING ONLY) WARNING: SPI Configuration Lockdown activated. FAILED! This chipset supports the following protocols: FWH, SPI. Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Error: Image size doesn't match But: the Macronix flash chip as well as the Intel chipset (H67) are supported by Flashrom 0.9.4. All in all I'm reluctant to try it - especially since it already has a problem reading and verifying the BIOS. Any advice? Thanks, Matthijs

2 2

Re: [flashrom] ASRock P4V88
by Stefan Tauner 03 Sep '11

03 Sep '11

On Fri, 2 Sep 2011 20:05:13 +0200 Raúl Sigüenza <raulsiguenza89(a)gmail.com> wrote: > Board: http://www.asrock.com/mb/overview.asp?Model=p4v88 > > root@desktop:/home/raul# flashrom -Vr bios.bin > flashrom v0.9.3-r1323 on Linux 2.6.38-11-generic (i686), built with libpci > 3.1.7, GCC 4.6.1, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 1981M loops per > second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1030 us, 10000 myus > = 11307 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: " " > DMI string system-product-name: "P4V88" > DMI string system-version: "1.00" > DMI string baseboard-manufacturer: " " > DMI string baseboard-product-name: "P4V88" > DMI string baseboard-version: "1.0" > DMI string chassis-type: "" > Found chipset "VIA VT8237", enabling flash write... chipset PCI ID is > 1106:3227, OK. > This chipset supports the following protocols: Non-SP. > […] > Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 > Found chip "SST SST39SF020A" (256 kB, Parallel) at physical address > 0xfffc0000. > […] > === > This flash part has status UNTESTED for operations: WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom(a)flashrom.org if any of the above > operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, -Vr, > -Vw, -VE), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! > Reading flash... done. > Restoring PCI config space for 00:11:0 reg 0x59 > Restoring PCI config space for 00:11:0 reg 0x40 > Restoring PCI config space for 00:11:0 reg 0x41 hi what is the purpose of your mail exactly? :) have you tried writing the flash chip? because that's the only thing that would be helpful to us... if you are not sure if your board is supported... we don't know! you have to try it please :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1425 - trunk
by repository service 03 Sep '11

03 Sep '11

Author: stefanct Date: Sat Sep 3 13:22:27 2011 New Revision: 1425 URL: http://flashrom.org/trac/flashrom/changeset/1425 Log: Add a bunch of new/tested stuff and various small changes 7 - add Asus Crosshair IV Extreme to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007640.html - add Biostar N68S3+ to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-September/007788.html - add P7H55-M LX to the list of supported boards although flashrom works correctly, it is marked as not ok, because flashing the vendor image will break the LAN interface. - add GA-X58A-UD7 to the list of supported boards http://paste.flashrom.org/view.php?id=739 - add Asus P4P800-VM to print.c (has a working board enable) - add Asus K8V-X to print.c reported by florz http://paste.flashrom.org/view.php?id=742 - add Intel D865GLC to print.c as non-working (ICH5 with BIOS lock enable) reported by jmd on IRC http://paste.flashrom.org/view.php?id=775 - add Intel DH67CF to print.c as non-working (H67 with BIOS lock enable and locked ME region) http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html - add ECS P4M800PRO-M (V1.0A) to the list of supported boards reported by dweg on IRC (hot flashed a SST49LF040B, original was W39V040B) - add X8DTU-6TF+ to print.c (needs ME unlocking) http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - add Shuttle FH67 (used in the SH67H3 barebone) to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - add Tyan S2912 to the list of supported boards reported by erlan on IRC - add ZOTAC GeForce 8200 to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007612.html - mark AT25DF321A as TEST_OK_PROBE http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - mark 28F001BN/BX-T as TEST_OK_PR http://www.flashrom.org/pipermail/flashrom/2011-July/007208.html - rename MX29F002 http://patchwork.coreboot.org/patch/2794/ - mark SST39SF040 as fully tested reported by Florian 'florz' Zumbiehl http://paste.flashrom.org/view.php?id=742 - mark SST49LF040B as fully tested reported by dweg on IRC and later by Armin on the ml: http://www.flashrom.org/pipermail/flashrom/2011-August/007764.html - mark H55 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html - mark H67 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - mark a MCP61 version as OK http://www.flashrom.org/pipermail/flashrom/2011-September/007788.html - add preliminary X79 (patsburg) PCI IDs 0x1d40 was reported already as working (not archived in our pipermail?) http://marc.info/?l=flashrom&m=130683026218257&w=2 - mark "82557/8/9/0/1 Ethernet Pro 100" in nicintel.c as working http://www.flashrom.org/pipermail/flashrom/2011-August/007480.html - rename some chips that had gratuitous "probing" suffixes: - SST25VF010.REMS - SST25VF040.REMS - M25P05.RES - M25P10.RES some other chip names with suffixes are needed due to lack of support for multiple probe functions per chip. this is explained here: http://www.flashrom.org/pipermail/flashrom/2011-August/007597.html - remove unneeded nicintel_spi-related function declarations in programmer.h - typos and whitespace fixes - fix Asus P4P800-E Deluxe detection The original board enable was added before DMI matching and used the IDs of a Promise controller as secondary PCI ID set. The controller could be disabled in the BIOS which would make the board not match. This patch uses the SMBus controller instead and adds a DMI pattern. This was Tested-by: Michael Schneider <vdrportal_midas at gmx dot de> - add "Sealed-case PC" to the list of chassis type (as indicating "not a laptop") This is Acked-by: Idwer Vollering <vidwer(a)gmail.com> the fix for the typo unusued -> unused is Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier(a)gmail.com> everything else is Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> And everything was reviewed and Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/dmi.c trunk/flashchips.c trunk/flashchips.h trunk/nicintel.c trunk/print.c trunk/programmer.h Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/board_enable.c Sat Sep 3 13:22:27 2011 (r1425) @@ -2018,7 +2018,7 @@ {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, P3, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, P3, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, P3, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, - {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D3, 0x1043, 0x80A6, "^P4P800-E$", NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x8086, 0x24d0, 0, 0, NULL, NULL, NULL, P3, "ASUS", "P4P800-VM", 0, OK, intel_ich_gpio21_raise}, {0x1039, 0x0651, 0x1043, 0x8081, 0x1039, 0x0962, 0, 0, NULL, NULL, NULL, P3, "ASUS", "P4SC-E", 0, OK, it8707f_write_enable_2e}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, P3, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/chipset_enable.c Sat Sep 3 13:22:27 2011 (r1425) @@ -327,7 +327,7 @@ } if (fwh_idsel & 0xffff000000000000ULL) { msg_perr("Error: fwh_idsel= specified, but value had " - "unusued bits set.\n"); + "unused bits set.\n"); goto idsel_garbage_out; } fwh_idsel_old = pci_read_long(dev, 0xd0); @@ -341,7 +341,7 @@ /* FIXME: Decode settings are not changed. */ } else if (idsel) { msg_perr("Error: fwh_idsel= specified, but no value given.\n"); -idsel_garbage_out: +idsel_garbage_out: free(idsel); /* FIXME: Return failure here once internal_init() starts * to care about the return value of the chipset enable. @@ -846,8 +846,8 @@ if (new != old) { rpci_write_byte(dev, 0x88, new); if (pci_read_byte(dev, 0x88) != new) { - msg_pinfo("Setting register to set 0x%x to 0x%x on %s " - "failed (WARNING ONLY).\n", 0x88, new, name); + msg_pinfo("Setting register 0x%x to 0x%x on %s failed " + "(WARNING ONLY).\n", 0x88, new, name); } } @@ -1152,7 +1152,7 @@ {0x10de, 0x0366, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */ {0x10de, 0x03e0, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, - {0x10de, 0x03e1, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, + {0x10de, 0x03e1, OK, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x03e2, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x03e3, NT, "NVIDIA", "MCP61", enable_flash_mcp6x_7x}, {0x10de, 0x0440, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x}, @@ -1196,7 +1196,7 @@ {0x8086, 0x1c46, NT, "Intel", "P67", enable_flash_pch6}, {0x8086, 0x1c47, NT, "Intel", "UM67", enable_flash_pch6}, {0x8086, 0x1c49, NT, "Intel", "HM65", enable_flash_pch6}, - {0x8086, 0x1c4a, NT, "Intel", "H67", enable_flash_pch6}, + {0x8086, 0x1c4a, OK, "Intel", "H67", enable_flash_pch6}, {0x8086, 0x1c4b, NT, "Intel", "HM67", enable_flash_pch6}, {0x8086, 0x1c4c, NT, "Intel", "Q65", enable_flash_pch6}, {0x8086, 0x1c4d, NT, "Intel", "QS67", enable_flash_pch6}, @@ -1207,6 +1207,8 @@ {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6}, {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6}, {0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_pch6}, + {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */ + {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */ {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e}, @@ -1249,7 +1251,7 @@ {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_pch5}, {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_pch5}, {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_pch5}, - {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_pch5}, + {0x8086, 0x3b06, OK, "Intel", "H55", enable_flash_pch5}, {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_pch5}, {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_pch5}, {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_pch5}, Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/dmi.c Sat Sep 3 13:22:27 2011 (r1425) @@ -81,6 +81,7 @@ {0x0e, 1, "Sub Notebook"}, {0x11, 0, "Main Server Chassis"}, {0x17, 0, "Rack Mount Chassis"}, + {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ }; #define DMI_COMMAND_LEN_MAX 260 Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/flashchips.c Sat Sep 3 13:22:27 2011 (r1425) @@ -1544,7 +1544,7 @@ .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3768,13 +3768,13 @@ .model_id = INTEL_28F001T, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {112 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 1}, @@ -4488,7 +4488,7 @@ { .vendor = "Macronix", - .name = "MX29F002B", + .name = "MX29F002(N)B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002B, @@ -4520,7 +4520,7 @@ { .vendor = "Macronix", - .name = "MX29F002T", + .name = "MX29F002(N)T", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002T, @@ -5637,7 +5637,7 @@ { .vendor = "SST", - .name = "SST25VF010.REMS", + .name = "SST25VF010", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF010_REMS, @@ -5775,7 +5775,7 @@ { .vendor = "SST", - .name = "SST25VF040.REMS", + .name = "SST25VF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040_REMS, @@ -6125,7 +6125,7 @@ .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -6610,7 +6610,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = @@ -6729,7 +6729,7 @@ */ { .vendor = "ST", - .name = "M25P05.RES", + .name = "M25P05", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, @@ -6784,7 +6784,7 @@ /* The ST M25P10 has the same problem as the M25P05. */ { .vendor = "ST", - .name = "M25P10.RES", + .name = "M25P10", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, @@ -6837,7 +6837,7 @@ }, { - .vendor = "ST", + .vendor = "ST", /* Numonyx */ .name = "M25P40", .bustype = BUS_SPI, .manufacture_id = ST_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/flashchips.h Sat Sep 3 13:22:27 2011 (r1425) @@ -369,8 +369,8 @@ #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18 -#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB */ -#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT */ +#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB; N has reset pin n/c. */ +#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT; N has reset pin n/c. */ #define MACRONIX_MX29F004B 0x46 #define MACRONIX_MX29F004T 0x45 #define MACRONIX_MX29F022T 0x36 /* Same as MX29F022NT */ @@ -474,7 +474,7 @@ #define SST_SST25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ #define SST_SST25VF040B 0x258D #define SST_SST25VF040B_REMS 0x8D /* REMS or RES opcode */ -#define SST_SST25VF080_REMS 0x80 /* REMS or RES opcode */ +#define SST_SST25VF080_REMS 0x80 /* REMS or RES opcode, same as SST25LF080A */ #define SST_SST25VF080B 0x258E #define SST_SST25VF080B_REMS 0x8E /* REMS or RES opcode */ #define SST_SST25VF016B 0x2541 @@ -526,7 +526,7 @@ * ST25P chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize) at least for some chips. */ -#define ST_ID 0x20 /* ST / SGS/Thomson */ +#define ST_ID 0x20 /* ST / SGS/Thomson / Numonyx (later acquired by Micron) */ #define ST_M25P05A 0x2010 #define ST_M25P05_RES 0x10 /* Same code as M25P10. */ #define ST_M25P10A 0x2011 Modified: trunk/nicintel.c ============================================================================== --- trunk/nicintel.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/nicintel.c Sat Sep 3 13:22:27 2011 (r1425) @@ -28,7 +28,7 @@ const struct pcidev_status nics_intel[] = { {PCI_VENDOR_ID_INTEL, 0x1209, NT, "Intel", "8255xER/82551IT Fast Ethernet Controller"}, - {PCI_VENDOR_ID_INTEL, 0x1229, NT, "Intel", "82557/8/9/0/1 Ethernet Pro 100"}, + {PCI_VENDOR_ID_INTEL, 0x1229, OK, "Intel", "82557/8/9/0/1 Ethernet Pro 100"}, {}, }; Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/print.c Sat Sep 3 13:22:27 2011 (r1425) @@ -431,9 +431,11 @@ B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL), B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL), B("ASUS", "A8V-E SE", 1, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/product.aspx?P_ID=lt1ShF6xEn3rlLe7", NULL), B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/product.aspx?P_ID=9BmKhMwWCwqyl1lz", NULL), B("ASUS", "K8V", 1, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL), B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o", NULL), + B("ASUS", "K8V-X", 1, NULL, NULL), B("ASUS", "K8V-X SE", 1, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL), B("ASUS", "M2A-MX", 1, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL), B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), @@ -469,6 +471,7 @@ B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), + B("ASUS", "P4P800-VM", 1, NULL, NULL), B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), @@ -496,8 +499,10 @@ B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL), B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), + B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), + B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), @@ -512,6 +517,7 @@ B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), + B("Elitegroup", "P4M800PRO-M (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), @@ -567,6 +573,7 @@ B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL), B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), @@ -579,7 +586,9 @@ B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), + B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), + B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), B("Intel", "EP80759", 1, NULL, NULL), B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), B("Intel", "Greencity", 1, NULL, "Intel reference board."), @@ -647,6 +656,7 @@ B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), B("Shuttle", "AV11V30", 1, NULL, NULL), B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), + B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -664,6 +674,7 @@ B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), + B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), @@ -683,6 +694,7 @@ B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), + B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), @@ -712,6 +724,7 @@ B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Wed Aug 31 18:19:50 2011 (r1424) +++ trunk/programmer.h Sat Sep 3 13:22:27 2011 (r1425) @@ -424,9 +424,6 @@ /* nicintel_spi.c */ #if CONFIG_NICINTEL_SPI == 1 int nicintel_spi_init(void); -int nicintel_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -void nicintel_spi_chip_writeb(uint8_t val, chipaddr addr); extern const struct pcidev_status nics_intel_spi[]; #endif

1 0

Re: [flashrom] Flash result!
by Stefan Tauner 03 Sep '11

03 Sep '11

On Fri, 2 Sep 2011 17:05:17 -0300 x3k9975 <x3k9975(a)gmail.com> wrote: > flashrom v0.9.4-r1412 on Linux 2.6.40.3-0.fc15.x86_64 (x86_64), built > with libpci 3.1.7, GCC 4.6.0 20110603 (Red Hat 4.6.0-10), little > endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 996M loops > per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1008 us, > 10000 myus = 9989 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "BIOSTAR Group" > DMI string system-product-name: "N68S3+" > DMI string system-version: " " > DMI string baseboard-manufacturer: "BIOSTAR Group" > DMI string baseboard-product-name: "N68S3+" thanks, added to our list of supported boards. > DMI string baseboard-version: " " > DMI string chassis-type: "Desktop" > Found ITE Super I/O, ID 0x8721 on port 0x2e > Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom please email a report to flashrom(a)flashrom.org including a > verbose (-V) log. Thank you! thanks, marked as tested. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Flash result!
by x3k9975 02 Sep '11

02 Sep '11

flashrom v0.9.4-r1412 on Linux 2.6.40.3-0.fc15.x86_64 (x86_64), built with libpci 3.1.7, GCC 4.6.0 20110603 (Red Hat 4.6.0-10), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 996M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1008 us, 10000 myus = 9989 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "BIOSTAR Group" DMI string system-product-name: "N68S3+" DMI string system-version: " " DMI string baseboard-manufacturer: "BIOSTAR Group" DMI string baseboard-product-name: "N68S3+" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8721 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Super I/O ID 0x8721 is not on the list of flash capable controllers. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Chip status register is 00 Found Winbond flash chip "W25Q80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S Erase/write done. Verifying flash... VERIFIED.

1 0

ASRock P4V88
by Raúl Sigüenza 02 Sep '11

02 Sep '11

Board: http://www.asrock.com/mb/overview.asp?Model=p4v88 root@desktop:/home/raul# flashrom -Vr bios.bin flashrom v0.9.3-r1323 on Linux 2.6.38-11-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1981M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1030 us, 10000 myus = 11307 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: "P4V88" DMI string system-version: "1.00" DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "P4V88" DMI string baseboard-version: "1.0" DMI string chassis-type: "" Found chipset "VIA VT8237", enabling flash write... chipset PCI ID is 1106:3227, OK. This chipset supports the following protocols: Non-SP. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A25L05PT, 64 kB: skipped. Probing for AMIC A25L05PU, 64 kB: skipped. Probing for AMIC A25L10PT, 128 kB: skipped. Probing for AMIC A25L10PU, 128 kB: skipped. Probing for AMIC A25L20PT, 256 kB: skipped. Probing for AMIC A25L20PU, 256 kB: skipped. Probing for AMIC A25L40PT, 512 kB: skipped. Probing for AMIC A25L40PU, 512 kB: skipped. Probing for AMIC A25L80P, 1024 kB: skipped. Probing for AMIC A25L16PT, 2048 kB: skipped. Probing for AMIC A25L16PU, 2048 kB: skipped. Probing for AMIC A25L512, 64 kB: skipped. Probing for AMIC A25L010, 128 kB: skipped. Probing for AMIC A25L020, 256 kB: skipped. Probing for AMIC A25L040, 512 kB: skipped. Probing for AMIC A25L080, 1024 kB: skipped. Probing for AMIC A25L016, 2048 kB: skipped. Probing for AMIC A25L032, 4096 kB: skipped. Probing for AMIC A25LQ032, 4096 kB: skipped. Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT25DF021, 256 kB: skipped. Probing for Atmel AT25DF041A, 512 kB: skipped. Probing for Atmel AT25DF081, 1024 kB: skipped. Probing for Atmel AT25DF081A, 1024 kB: skipped. Probing for Atmel AT25DF161, 2048 kB: skipped. Probing for Atmel AT25DF321, 4096 kB: skipped. Probing for Atmel AT25DF321A, 4096 kB: skipped. Probing for Atmel AT25DF641, 8192 kB: skipped. Probing for Atmel AT25DQ161, 2048 kB: skipped. Probing for Atmel AT25F512B, 64 kB: skipped. Probing for Atmel AT25FS010, 128 kB: skipped. Probing for Atmel AT25FS040, 512 kB: skipped. Probing for Atmel AT26DF041, 512 kB: skipped. Probing for Atmel AT26DF081A, 1024 kB: skipped. Probing for Atmel AT26DF161, 2048 kB: skipped. Probing for Atmel AT26DF161A, 2048 kB: skipped. Probing for Atmel AT26F004, 512 kB: skipped. Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT45CS1282, 16896 kB: skipped. Probing for Atmel AT45DB011D, 128 kB: skipped. Probing for Atmel AT45DB021D, 256 kB: skipped. Probing for Atmel AT45DB041D, 512 kB: skipped. Probing for Atmel AT45DB081D, 1024 kB: skipped. Probing for Atmel AT45DB161D, 2048 kB: skipped. Probing for Atmel AT45DB321C, 4224 kB: skipped. Probing for Atmel AT45DB321D, 4096 kB: skipped. Probing for Atmel AT45DB642D, 8192 kB: skipped. Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for EMST F25L008A, 1024 kB: skipped. Probing for Eon EN25B05, 64 kB: skipped. Probing for Eon EN25B05T, 64 kB: skipped. Probing for Eon EN25B10, 128 kB: skipped. Probing for Eon EN25B10T, 128 kB: skipped. Probing for Eon EN25B20, 256 kB: skipped. Probing for Eon EN25B20T, 256 kB: skipped. Probing for Eon EN25B40, 512 kB: skipped. Probing for Eon EN25B40T, 512 kB: skipped. Probing for Eon EN25B80, 1024 kB: skipped. Probing for Eon EN25B80T, 1024 kB: skipped. Probing for Eon EN25B16, 2048 kB: skipped. Probing for Eon EN25B16T, 2048 kB: skipped. Probing for Eon EN25B32, 4096 kB: skipped. Probing for Eon EN25B32T, 4096 kB: skipped. Probing for Eon EN25B64, 8192 kB: skipped. Probing for Eon EN25B64T, 8192 kB: skipped. Probing for Eon EN25D16, 2048 kB: skipped. Probing for Eon EN25F05, 64 kB: skipped. Probing for Eon EN25F10, 128 kB: skipped. Probing for Eon EN25F20, 256 kB: skipped. Probing for Eon EN25F40, 512 kB: skipped. Probing for Eon EN25F80, 1024 kB: skipped. Probing for Eon EN25F16, 2048 kB: skipped. Probing for Eon EN25F32, 4096 kB: skipped. Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: skipped. Probing for Macronix MX25L1005, 128 kB: skipped. Probing for Macronix MX25L2005, 256 kB: skipped. Probing for Macronix MX25L4005, 512 kB: skipped. Probing for Macronix MX25L8005, 1024 kB: skipped. Probing for Macronix MX25L1605, 2048 kB: skipped. Probing for Macronix MX25L1635D, 2048 kB: skipped. Probing for Macronix MX25L1635E, 2048 kB: skipped. Probing for Macronix MX25L3205, 4096 kB: skipped. Probing for Macronix MX25L3235D, 4096 kB: skipped. Probing for Macronix MX25L6405, 8192 kB: skipped. Probing for Macronix MX25L12805, 16384 kB: skipped. Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Numonyx M25PE10, 128 kB: skipped. Probing for Numonyx M25PE20, 256 kB: skipped. Probing for Numonyx M25PE40, 512 kB: skipped. Probing for Numonyx M25PE80, 1024 kB: skipped. Probing for Numonyx M25PE16, 2048 kB: skipped. Probing for PMC Pm25LV010, 128 kB: skipped. Probing for PMC Pm25LV016B, 2048 kB: skipped. Probing for PMC Pm25LV020, 256 kB: skipped. Probing for PMC Pm25LV040, 512 kB: skipped. Probing for PMC Pm25LV080B, 1024 kB: skipped. Probing for PMC Pm25LV512, 64 kB: skipped. Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: skipped. Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: skipped. Probing for Spansion S25FL008A, 1024 kB: skipped. Probing for Spansion S25FL016A, 2048 kB: skipped. Probing for Spansion S25FL032A, 4096 kB: skipped. Probing for Spansion S25FL064A, 8192 kB: skipped. Probing for SST SST25VF010.REMS, 128 kB: skipped. Probing for SST SST25VF016B, 2048 kB: skipped. Probing for SST SST25VF032B, 4096 kB: skipped. Probing for SST SST25VF064C, 8192 kB: skipped. Probing for SST SST25VF040.REMS, 512 kB: skipped. Probing for SST SST25VF040B, 512 kB: skipped. Probing for SST SST25LF040A.RES, 512 kB: skipped. Probing for SST SST25VF040B.REMS, 512 kB: skipped. Probing for SST SST25VF080B, 1024 kB: skipped. Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Found chip "SST SST39SF020A" (256 kB, Parallel) at physical address 0xfffc0000. Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: skipped. Probing for ST M25P05.RES, 64 kB: skipped. Probing for ST M25P10-A, 128 kB: skipped. Probing for ST M25P10.RES, 128 kB: skipped. Probing for ST M25P20, 256 kB: skipped. Probing for ST M25P40, 512 kB: skipped. Probing for ST M25P40-old, 512 kB: skipped. Probing for ST M25P80, 1024 kB: skipped. Probing for ST M25P16, 2048 kB: skipped. Probing for ST M25P32, 4096 kB: skipped. Probing for ST M25P64, 8192 kB: skipped. Probing for ST M25P128, 16384 kB: skipped. Probing for ST M25PX16, 2048 kB: skipped. Probing for ST M25PX32, 4096 kB: skipped. Probing for ST M25PX64, 8192 kB: skipped. Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xc6, id2 0x63, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x69, id2 0x95, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: skipped. Probing for Winbond W25Q16, 2048 kB: skipped. Probing for Winbond W25Q32, 4096 kB: skipped. Probing for Winbond W25Q64, 8192 kB: skipped. Probing for Winbond W25Q128, 16384 kB: skipped. Probing for Winbond W25x10, 128 kB: skipped. Probing for Winbond W25x20, 256 kB: skipped. Probing for Winbond W25x40, 512 kB: skipped. Probing for Winbond W25x80, 1024 kB: skipped. Probing for Winbond W25x16, 2048 kB: skipped. Probing for Winbond W25x32, 4096 kB: skipped. Probing for Winbond W25x64, 8192 kB: skipped. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 kB: skipped. Probing for Eon unknown Eon SPI chip, 0 kB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 kB: skipped. Probing for PMC unknown PMC SPI chip, 0 kB: skipped. Probing for SST unknown SST SPI chip, 0 kB: skipped. Probing for ST unknown ST SPI chip, 0 kB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: skipped. Probing for Generic unknown SPI chip (RDID), 0 kB: skipped. Probing for Generic unknown SPI chip (REMS), 0 kB: skipped. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Restoring PCI config space for 00:11:0 reg 0x59 Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41

1 0

[PATCH] Make all programmer/CLI options case-insensitive
by Uwe Hermann 02 Sep '11

02 Sep '11

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

3 4

Re: [flashrom] SuperMicro X8DTU-6TF+: flashrom -Vr failed
by Stefan Tauner 02 Sep '11

02 Sep '11

On Fri, 12 Aug 2011 15:16:16 -0500 Scott Silverman <ssilverman(a)simplexinvestments.com> wrote: > # ./flashrom -Vr ../current.bios > flashrom v0.9.4-r1412 on Linux 2.6.29.6-sxtickless (x86_64), built with > libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-50), little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 1 usecs, 1523M loops per > second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = > 9990 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "Supermicro" > DMI string system-product-name: "X8DTU-6+" > DMI string system-version: "1234567890" > DMI string baseboard-manufacturer: "Supermicro" > DMI string baseboard-product-name: "X8DTU-6+" > DMI string baseboard-version: "2.01" > DMI string chassis-type: "Main Server Chassis" > Found chipset "Intel ICH10R" with PCI ID 8086:3a16. Enabling flash write... > 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 > 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode enabled > 0x7fffffff/0x7fffffff FWH decode disabled > 0x7fffffff/0x7fffffff FWH decode disabled > 0x7fffffff/0x7fffffff FWH decode disabled > 0x7fffffff/0x7fffffff FWH decode disabled > Maximum FWH chip size: 0x100000 bytes > BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 > > Root Complex Register Block address = 0xfed1c000 > GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) > Top Swap : not enabled > SPIBAR = 0xfed1c000 + 0x3800 > 0x04: 0x6008 (HSFS) > HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 > 0x06: 0x0000 (HSFC) > HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 > 0x08: 0x00002000 (FADDR) > 0x50: 0x00001a1b (FRAP) > BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b > 0x54: 0x00010000 (FREG0: Flash Descriptor) > 0x00000000-0x00001fff is read-only > 0x58: 0x03ff0200 (FREG1: BIOS) > 0x00200000-0x003fffff is read-write > 0x5C: 0x01ff0002 (FREG2: Management Engine) > 0x00002000-0x001fffff is locked > 0x60: 0x00001fff (FREG3: Gigabit Ethernet) > Gigabit Ethernet region is unused. > 0x64: 0x00001fff (FREG4: Platform Data) > Platform Data region is unused. > 0x74: 0x00000000 (PR0) > 0x78: 0x00000000 (PR1) > 0x7C: 0x00000000 (PR2) > 0x80: 0x00000000 (PR3) > 0x84: 0x00000000 (PR4) > 0x90: 0x04 (SSFS) > SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 > 0x91: 0x000000 (SSFC) > SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 > 0x94: 0x3906 (PREOP) > 0x96: 0xd43b (OPTYPE) > 0x98: 0x05200302 (OPMENU) > 0x9C: 0x3906019f (OPMENU+4) > 0xA0: 0x00000000 (BBAR) > 0xD0: 0x00000000 (FPB) > Programming OPCODES... > program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 > done > preop0=0x06, preop1=0x50 > op[0]=0x02, 3, 0 > op[1]=0x03, 2, 0 > op[2]=0xd8, 3, 0 > op[3]=0x05, 0, 0 > op[4]=0x90, 2, 0 > op[5]=0x01, 1, 0 > op[6]=0x9f, 0, 0 > op[7]=0xc7, 1, 0 > > SPI Read Configuration: prefetching disabled, caching enabled, OK. > This chipset supports the following protocols: FWH, SPI. > […] > Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 > 0x4701 > Chip status register is 10 > Found Atmel flash chip "AT25DF321A" (4096 kB, SPI) at physical address > 0xffc00000. > Ignoring security lockdown (if present) > Ignoring status register byte 2 > Chip status register is 10 > Chip status register: Sector Protection Register Lock (SRPL) is not set > Chip status register: Bit 6 is not set > Chip status register: Erase/Program Error (EPE) is not set > Chip status register: WP# pin (WPP) is not asserted > Chip status register: Software Protection Status (SWP): no sectors are > protected > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > […] > === > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom(a)flashrom.org if any of the above > operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, -Vr, > -Vw, -VE), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! > Ignoring security lockdown (if present) > Reading flash... Transaction error! > SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 > SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 > Running OPCODE 0x03 failed at address 0x002000 (payload length was 64). > Read operation failed! > FAILED. > Restoring MMIO space at 0x7fe44a3648a0 > Restoring MMIO space at 0x7fe44a36489c > Restoring MMIO space at 0x7fe44a364898 > Restoring MMIO space at 0x7fe44a364896 > Restoring MMIO space at 0x7fe44a364894 > Restoring PCI config space for 00:1f:0 reg 0xdc Hello Scott, Thanks for your report! I have marked the flash chip as being detectable and will commit that later. The transaction error is expected, because the region is locked: > 0x5C: 0x01ff0002 (FREG2: Management Engine) > 0x00002000-0x001fffff is locked we are working on that but dont expect it to be working soon. i'll add the board to our list of (un)supported boards. you could try to update the bios region only with the help of a layout file, but i would not recommend it at all(!). the ME region contains the firmware for an embedded controller on your board and the (new) BIOS might not be compatible with the old firmware. this could lead to a bricked board that requires an external flash programmer and possibly even desoldering the flash chip to fix it... please use the vendor tools instead, sorry. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

output flashrom -V
by Armin Taschwer 02 Sep '11

02 Sep '11

FYI

1 0

Re: [flashrom] [PATCH] Add a bunch of new/tested stuff and various small changes 7
by Uwe Hermann 02 Sep '11

02 Sep '11

Hi, Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> but please see below for a review. On Thu, Sep 01, 2011 at 01:37:48AM +0200, Stefan Tauner wrote: > - add P7H55-M LX to the list of supported boards > although flashrom works correctly, it is marked as not ok, because flashing the > vendor image will break the LAN interface. Hm, dunno if this is what we want to do, the "board loses MAC address" issue happens for other boards too and is not strictly flashrom related. Feel free to commit, that should probably be another thread discussing how we want to handle the "board loses MAC address" cases. > - add Intel D865GLC to print.c "add Intel D865GLC to print.c as non-working (ICH5 with BIOS lock enable)" > - add Zotac GeForce 8200 to the list of supported boards "ZOTAC" as per vendor website, they use that spelling pretty consistently there (you correctly used "ZOTAC" in the source code already). > - add preliminary X79 (patsburg) PCI IDs > 0x1d40 was reported already as working (not archived in our pipermail?) One of the X79 entries is marked OK, the relevant mail for that report is http://marc.info/?l=flashrom&m=130683026218257&w=2 I think, please mention that here. > - rename some chips that had gratuitous "probing" suffixes: > - SST25VF010.REMS > - SST25VF040.REMS > - M25P05.RES > - M25P10.RES Please mention the reason / mail / URL for that here. > - fix Asus P4P800-E Deluxe detection > The original board enable was added before DMI matching and used > the IDs of a Promise controller as secondary PCI ID set. The > controller could be disabled in the BIOS which would make the > board not match. This patch uses the SMBUS controller instead and SMBUS -> SMBus > + B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), ^^^^ I'd add "Used in the Shuttle SH67H3 barebone." (or similar) here. And/or make the board name "FH67 (SH67H3)", but that's probably not such a good idea. > + B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), ^^^^ Maybe add "Tested on the S2912G2NR model (without SAS)." or similar. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

4 4

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches
by Paul Menzel 01 Sep '11

01 Sep '11

Dear Thomas, Am Donnerstag, den 01.09.2011, 15:28 +0200 schrieb Frei, Thomas (GE Germany): > I tried to clean the build environment (make clean), and reloaded the sources. > > With this clean base I started step by step to patch: > > Make -> PASS > Patch < 0001....patch -> PASS > Make -> PASS > Patch < 0002....patch -> ERROR!!! […] please write exactly what sources you took or what revision you are on, where (URL) you downloaded the patches from and what the commands were you executed. I guess the developers will be able to reproduce it then. Thanks, Paul PS: If you top post, please remove the full quote from the bottom.

1 0

Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches
by Frei, Thomas (GE Germany) 01 Sep '11

01 Sep '11

Hi, I tried to clean the build environment (make clean), and reloaded the sources. With this clean base I started step by step to patch: Make -> PASS Patch < 0001....patch -> PASS Make -> PASS Patch < 0002....patch -> ERROR!!! --- snip --- (Stripping trailing CRs from patch) patching file cli_classic.c Hunk #1 FAILED at 226. Hunk #2 FAILED at 318. 2 out of 2 hunks FAILED -- saving rejects to cli_classic.c.rej (Stripping trailing CRs from patch) patching file flash.h Hunk #1 FAILED at 255. 1 out of 1 hunk FAILED -- saving rejects to flash.h.rej (Stripping trailing CRs from patch) patching file layout.c --- snip --- Am I doinf wrong, or what else can be? Best regards Thomas -----Original Message----- From: Frei, Thomas (GE Germany) Sent: Freitag, 26. August 2011 11:25 To: 'flashrom(a)flashrom.org' Subject: RE: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches Hi, Now I loaded the Revision 1421 from SVN repository, patched it and tried to compile - nope :-( Output of GCC: ---snip--- Checking for a C compiler... found. ARCH is "x86" Checking for libpci headers... found. Checking if libpci is present and sufficient... yes. Checking for FTDI support... not found. Checking for utsname support... found. cc -MMD -Os -Wall -Wshadow -Werror -D'CONFIG_INTERNAL=1' -D'CONFIG_SERPROG=1' -D'CONFIG_RAYER_SPI=1' -D'CONFIG_BITBANG_SPI=1' -D'CONFIG_NIC3COM=1' -D'CONFIG_GFXNVIDIA=1' -D'CONFIG_SATASII=1' -D'CONFIG_DUMMY=1' -D'CONFIG_DRKAISER=1' -D'CONFIG_NICREALTEK=1' -D'CONFIG_NICINTEL=1' -D'CONFIG_NICINTEL_SPI=1' -D'CONFIG_OGP_SPI=1' -D'CONFIG_BUSPIRATE_SPI=1' -D'CONFIG_SATAMV=1' -D'NEED_PCI=1' -D'HAVE_UTSNAME=1' -D'FLASHROM_VERSION="0.9.4-r1421"' -o layout.o -c layout.c layout.c:43:20: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before ârom_entriesâ layout.c: In function âread_romlayoutâ: layout.c:161:50: error: ârom_entriesâ undeclared (first use in this function) layout.c:161:50: note: each undeclared identifier is reported only once for each function it appears in layout.c: At top level: layout.c:214:12: error: static declaration of âfind_romentryâ follows non-static declaration flash.h:256:5: note: previous declaration of âfind_romentryâ was here layout.c: In function âfind_romentryâ: layout.c:230:15: error: ârom_entriesâ undeclared (first use in this function) layout.c: At top level: layout.c:279:13: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â*â token layout.c:309:47: error: expected â)â before â*â token layout.c: In function âbuild_new_imageâ: layout.c:355:2: error: âromlayout_tâ undeclared (first use in this function) layout.c:355:15: error: âentryâ undeclared (first use in this function) cc1: warnings being treated as errors layout.c:368:3: error: implicit declaration of function âget_next_included_romentryâ layout.c:381:3: error: implicit declaration of function âread_content_from_fileâ make: *** [layout.o] Error 1 ---snip--- ??? Please help. Thank you Thomas -----Original Message----- From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at] Sent: Mittwoch, 24. August 2011 17:42 To: Frei, Thomas (GE Germany) Cc: flashrom(a)flashrom.org Subject: Re: [flashrom] report for Intel QM67 | Winbond W25Q64 - layout patches On Wed, 24 Aug 2011 17:00:43 +0200 "Frei, Thomas (GE Germany)" <Thomas.Frei(a)ge.com> wrote: > Hi, > > sorry, msg_gsbg2 is a typo - it is of course msg_gdbg2. > > I'm using the 0.9.4 from http://www.flashrom.org/Downloads. > > Isn't this the latest? > 0.9.4 is the latest *stable* release, but the patches floating around here usually are to be applied on the latest *development* source code. please check out the source code with subversion as described on the download page and retry. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] add SPI interface support for Tunnel Creek chipset (2)
by Feldschmid, Ingo 01 Sep '11

01 Sep '11

The Intel Tunnel Creek chipset supports both an SPI and an LPC bus. Set chipset table entry for Tunnel Creek to new function "enable_flash_tunnelcreek", which will read the hardware straps and return support for the bus that has been used for booting. This function uses "ich_init_spi" with ich_generation set to 7 for initializing the SPI bus if necessary. SPI functionality tested on actual hardware (see attached file flashrom.log), Tunnel Creek LPC interface not tested yet (missing hardware for that). Marked Tunnel Creek chipset entry as tested. The patch has been created vs. flashrom trunk 1424. Signed-off-by: Ingo Feldschmid <ifel(a)msc-ge.com> <<tunnelcreek_1424.patch>> <<flashrom.log>> Es gelten unsere Allgemeinen Leistungsbedingungen die unter http://www.msc-ge.com/alb abrufbar sind. Our standard terms and conditions apply which are available under http://www.msc-ge.com/alb . MSC Vertriebs GmbH Sitz der Gesellschaft: Industriestrasse 16, 76297 Stutensee Handelsregister: Mannheim, HRB Nr. 10 3631 Geschaftsfuhrung: Manfred Schwarztrauber, Lothar Kummerlin, Rudiger Kuhn, Silvano Geissler Umsatzsteuer ID Nr.: DE 143 585 507 WEEE Reg. Nr. : DE 31011852 Gleichmann & Co. Electronics GmbH Sitz der Gesellschaft: Schraderstrasse 44, 67227 Frankenthal Handelsregister: Ludwigshafen, HRB Nr. 21305 Geschaftsfuhrung: Manfred Schwarztrauber, Thomas Klein Umsatzsteuer ID Nr. : DE 148 421 329 WEEE Reg. Nr.: DE 72277043 Diese E-Mail enthalt vertrauliche und/ oder rechtlich geschutzte Informationen. Wenn Sie nicht der beabsichtigte Empfanger sind, informieren Sie bitte sofort den Absender und loschen Sie diese E-Mail. The information contained in this message is confidential and/ or protected by law. If you are not the intended recipient, please contact the sender and delete this message.

1 0

[PATCH] Add a bunch of new/tested stuff and various small changes 7
by Stefan Tauner 31 Aug '11

31 Aug '11

- add Asus Crosshair IV Extreme to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007640.html - add P7H55-M LX to the list of supported boards although flashrom works correctly, it is marked as not ok, because flashing the vendor image will break the LAN interface. - add GA-X58A-UD7 to the list of supported boards http://paste.flashrom.org/view.php?id=739 - add Asus P4P800-VM to print.c (has a working board enable) - add Asus K8V-X to print.c reported by florz http://paste.flashrom.org/view.php?id=742 - add Intel D865GLC to print.c reported by jmd on IRC http://paste.flashrom.org/view.php?id=775 - add ECS P4M800PRO-M (V1.0A) to the list of supported boards reported by dweg on IRC (hot flashed a SST49LF040B, original was W39V040B) - add X8DTU-6TF+ to print.c (needs ME unlocking) http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - add Shuttle FH67 (used in the SH67H3 barebone) to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - add Tyan S2912 to the list of supported boards reported by erlan on IRC - add Zotac GeForce 8200 to the list of supported boards http://www.flashrom.org/pipermail/flashrom/2011-August/007612.html - mark AT25DF321A as TEST_OK_PROBE http://www.flashrom.org/pipermail/flashrom/2011-August/007553.html - mark 28F001BN/BX-T as TEST_OK_PR http://www.flashrom.org/pipermail/flashrom/2011-July/007208.html - rename MX29F002 http://patchwork.coreboot.org/patch/2794/ - mark SST39SF040 as fully tested reported by Florian 'florz' Zumbiehl http://paste.flashrom.org/view.php?id=742 - mark SST49LF040B as fully tested reported by dweg on IRC and later by Armin on the ml: http://www.flashrom.org/pipermail/flashrom/2011-August/007764.html - mark H55 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html - mark H67 chipset as OK http://www.flashrom.org/pipermail/flashrom/2011-August/007749.html - add preliminary X79 (patsburg) PCI IDs 0x1d40 was reported already as working (not archived in our pipermail?) - mark "82557/8/9/0/1 Ethernet Pro 100" in nicintel.c as working http://www.flashrom.org/pipermail/flashrom/2011-August/007480.html - rename some chips that had gratuitous "probing" suffixes: - SST25VF010.REMS - SST25VF040.REMS - M25P05.RES - M25P10.RES - remove unneeded nicintel_spi-related function declarations in programmer.h - typos and whitespace fixes - fix Asus P4P800-E Deluxe detection The original board enable was added before DMI matching and used the IDs of a Promise controller as secondary PCI ID set. The controller could be disabled in the BIOS which would make the board not match. This patch uses the SMBUS controller instead and adds a DMI pattern. This was Tested-by: Michael Schneider <vdrportal_midas at gmx dot de> - add "Sealed-case PC" to the list of chassis type (as indicating "not a laptop") This is Acked-by: Idwer Vollering <vidwer(a)gmail.com> the fix for the typo unusued -> unused is Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier(a)gmail.com> everything else is Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- I think this is (more than) big enough to be committed. If no one vetoes i will commit it friday evening. board_enable.c | 2 +- chipset_enable.c | 12 +++++++----- dmi.c | 1 + flashchips.c | 24 ++++++++++++------------ flashchips.h | 8 ++++---- nicintel.c | 2 +- print.c | 11 +++++++++++ programmer.h | 3 --- 8 files changed, 37 insertions(+), 26 deletions(-) diff --git a/board_enable.c b/board_enable.c index 72f4cfe..896ab40 100644 --- a/board_enable.c +++ b/board_enable.c @@ -2018,7 +2018,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, P3, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, P3, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, P3, "ASUS", "P4P800", 0, NT, intel_ich_gpio21_raise}, - {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D3, 0x1043, 0x80A6, "^P4P800-E$", NULL, NULL, P3, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x8086, 0x24d0, 0, 0, NULL, NULL, NULL, P3, "ASUS", "P4P800-VM", 0, OK, intel_ich_gpio21_raise}, {0x1039, 0x0651, 0x1043, 0x8081, 0x1039, 0x0962, 0, 0, NULL, NULL, NULL, P3, "ASUS", "P4SC-E", 0, OK, it8707f_write_enable_2e}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, P3, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, diff --git a/chipset_enable.c b/chipset_enable.c index 336ad2e..ce00324 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -327,7 +327,7 @@ static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) } if (fwh_idsel & 0xffff000000000000ULL) { msg_perr("Error: fwh_idsel= specified, but value had " - "unusued bits set.\n"); + "unused bits set.\n"); goto idsel_garbage_out; } fwh_idsel_old = pci_read_long(dev, 0xd0); @@ -341,7 +341,7 @@ static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) /* FIXME: Decode settings are not changed. */ } else if (idsel) { msg_perr("Error: fwh_idsel= specified, but no value given.\n"); -idsel_garbage_out: +idsel_garbage_out: free(idsel); /* FIXME: Return failure here once internal_init() starts * to care about the return value of the chipset enable. @@ -846,7 +846,7 @@ static int enable_flash_ck804(struct pci_dev *dev, const char *name) if (new != old) { rpci_write_byte(dev, 0x88, new); if (pci_read_byte(dev, 0x88) != new) { - msg_pinfo("Setting register to set 0x%x to 0x%x on %s " + msg_pinfo("Setting register to 0x%x to 0x%x on %s " "failed (WARNING ONLY).\n", 0x88, new, name); } } @@ -1196,7 +1196,7 @@ const struct penable chipset_enables[] = { {0x8086, 0x1c46, NT, "Intel", "P67", enable_flash_pch6}, {0x8086, 0x1c47, NT, "Intel", "UM67", enable_flash_pch6}, {0x8086, 0x1c49, NT, "Intel", "HM65", enable_flash_pch6}, - {0x8086, 0x1c4a, NT, "Intel", "H67", enable_flash_pch6}, + {0x8086, 0x1c4a, OK, "Intel", "H67", enable_flash_pch6}, {0x8086, 0x1c4b, NT, "Intel", "HM67", enable_flash_pch6}, {0x8086, 0x1c4c, NT, "Intel", "Q65", enable_flash_pch6}, {0x8086, 0x1c4d, NT, "Intel", "QS67", enable_flash_pch6}, @@ -1207,6 +1207,8 @@ const struct penable chipset_enables[] = { {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6}, {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6}, {0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_pch6}, + {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */ + {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_ich10}, /* FIXME: when datasheet is available */ {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e}, @@ -1249,7 +1251,7 @@ const struct penable chipset_enables[] = { {0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_pch5}, {0x8086, 0x3b02, NT, "Intel", "P55", enable_flash_pch5}, {0x8086, 0x3b03, NT, "Intel", "PM55", enable_flash_pch5}, - {0x8086, 0x3b06, NT, "Intel", "H55", enable_flash_pch5}, + {0x8086, 0x3b06, OK, "Intel", "H55", enable_flash_pch5}, {0x8086, 0x3b07, OK, "Intel", "QM57", enable_flash_pch5}, {0x8086, 0x3b08, NT, "Intel", "H57", enable_flash_pch5}, {0x8086, 0x3b09, NT, "Intel", "HM55", enable_flash_pch5}, diff --git a/dmi.c b/dmi.c index 8f78376..5f64b94 100644 --- a/dmi.c +++ b/dmi.c @@ -81,6 +81,7 @@ static const struct { {0x0e, 1, "Sub Notebook"}, {0x11, 0, "Main Server Chassis"}, {0x17, 0, "Rack Mount Chassis"}, + {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ }; #define DMI_COMMAND_LEN_MAX 260 diff --git a/flashchips.c b/flashchips.c index 7e7f47d..5ee8210 100644 --- a/flashchips.c +++ b/flashchips.c @@ -1544,7 +1544,7 @@ const struct flashchip flashchips[] = { .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3768,13 +3768,13 @@ const struct flashchip flashchips[] = { .model_id = INTEL_28F001T, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { + .eraseblocks = { {112 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 1}, @@ -4488,7 +4488,7 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29F002B", + .name = "MX29F002(N)B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002B, @@ -4520,7 +4520,7 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29F002T", + .name = "MX29F002(N)T", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002T, @@ -5637,7 +5637,7 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25VF010.REMS", + .name = "SST25VF010", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF010_REMS, @@ -5775,7 +5775,7 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25VF040.REMS", + .name = "SST25VF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040_REMS, @@ -6125,7 +6125,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -6610,7 +6610,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = @@ -6729,7 +6729,7 @@ const struct flashchip flashchips[] = { */ { .vendor = "ST", - .name = "M25P05.RES", + .name = "M25P05", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, @@ -6784,7 +6784,7 @@ const struct flashchip flashchips[] = { /* The ST M25P10 has the same problem as the M25P05. */ { .vendor = "ST", - .name = "M25P10.RES", + .name = "M25P10", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, @@ -6837,7 +6837,7 @@ const struct flashchip flashchips[] = { }, { - .vendor = "ST", + .vendor = "ST", /* Numonyx */ .name = "M25P40", .bustype = BUS_SPI, .manufacture_id = ST_ID, diff --git a/flashchips.h b/flashchips.h index ff49d31..e8b46ad 100644 --- a/flashchips.h +++ b/flashchips.h @@ -369,8 +369,8 @@ #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18 -#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB */ -#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT */ +#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB; N has reset pin n/c. */ +#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT; N has reset pin n/c. */ #define MACRONIX_MX29F004B 0x46 #define MACRONIX_MX29F004T 0x45 #define MACRONIX_MX29F022T 0x36 /* Same as MX29F022NT */ @@ -474,7 +474,7 @@ #define SST_SST25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ #define SST_SST25VF040B 0x258D #define SST_SST25VF040B_REMS 0x8D /* REMS or RES opcode */ -#define SST_SST25VF080_REMS 0x80 /* REMS or RES opcode */ +#define SST_SST25VF080_REMS 0x80 /* REMS or RES opcode, same as SST25LF080A */ #define SST_SST25VF080B 0x258E #define SST_SST25VF080B_REMS 0x8E /* REMS or RES opcode */ #define SST_SST25VF016B 0x2541 @@ -526,7 +526,7 @@ * ST25P chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize) at least for some chips. */ -#define ST_ID 0x20 /* ST / SGS/Thomson */ +#define ST_ID 0x20 /* ST / SGS/Thomson / Numonyx (later acquired by Micron) */ #define ST_M25P05A 0x2010 #define ST_M25P05_RES 0x10 /* Same code as M25P10. */ #define ST_M25P10A 0x2011 diff --git a/nicintel.c b/nicintel.c index 5410523..f94cbc9 100644 --- a/nicintel.c +++ b/nicintel.c @@ -28,7 +28,7 @@ uint8_t *nicintel_control_bar; const struct pcidev_status nics_intel[] = { {PCI_VENDOR_ID_INTEL, 0x1209, NT, "Intel", "8255xER/82551IT Fast Ethernet Controller"}, - {PCI_VENDOR_ID_INTEL, 0x1229, NT, "Intel", "82557/8/9/0/1 Ethernet Pro 100"}, + {PCI_VENDOR_ID_INTEL, 0x1229, OK, "Intel", "82557/8/9/0/1 Ethernet Pro 100"}, {}, }; diff --git a/print.c b/print.c index f0bd477..66eb144 100644 --- a/print.c +++ b/print.c @@ -431,9 +431,11 @@ const struct board_info boards_known[] = { B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL), B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL), B("ASUS", "A8V-E SE", 1, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/product.aspx?P_ID=lt1ShF6xEn3rlLe7", NULL), B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/product.aspx?P_ID=9BmKhMwWCwqyl1lz", NULL), B("ASUS", "K8V", 1, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL), B("ASUS", "K8V SE Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o", NULL), + B("ASUS", "K8V-X", 1, NULL, NULL), B("ASUS", "K8V-X SE", 1, "http://www.asus.com/product.aspx?P_ID=lzDXlbBVHkdckHVr", NULL), B("ASUS", "M2A-MX", 1, "http://www.asus.com/product.aspx?P_ID=BmaOnPewi1JgltOZ", NULL), B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), @@ -469,6 +471,7 @@ const struct board_info boards_known[] = { B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), + B("ASUS", "P4P800-VM", 1, NULL, NULL), B("ASUS", "P4SC-E", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P4S533-X", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL), @@ -496,6 +499,7 @@ const struct board_info boards_known[] = { B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL), B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), + B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -512,6 +516,7 @@ const struct board_info boards_known[] = { B("Elitegroup", "K7S5A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…", NULL), B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), + B("Elitegroup", "P4M800PRO-M (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), @@ -567,6 +572,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL), B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), B("HP", "ProLiant DL165 G6", 1, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-33…", NULL), @@ -579,6 +585,7 @@ const struct board_info boards_known[] = { B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), + B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), B("Intel", "EP80759", 1, NULL, NULL), B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), @@ -647,6 +654,7 @@ const struct board_info boards_known[] = { B("Shuttle", "AK38N", 1, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL), B("Shuttle", "AV11V30", 1, NULL, NULL), B("Shuttle", "FD37", 1, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL), + B("Shuttle", "FH67", 1, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL), B("Shuttle", "FN25", 1, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL), B("Shuttle", "X50/X50(B)", 1, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL), B("Soyo", "SY-5VD", 0, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), @@ -664,6 +672,7 @@ const struct board_info boards_known[] = { B("Supermicro", "X8DT3", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), B("Supermicro", "X8DTH-6F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), B("Supermicro", "X8DTT-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL), + B("Supermicro", "X8DTU-6TF+", 0, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&…", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X8DTU-F", 1, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), B("Supermicro", "X8SIE(-F)", 0, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), B("Supermicro", "X8STi", 1, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), @@ -683,6 +692,7 @@ const struct board_info boards_known[] = { B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), + B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), @@ -712,6 +722,7 @@ const struct board_info boards_known[] = { B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif diff --git a/programmer.h b/programmer.h index 6a28dbe..70f3c09 100644 --- a/programmer.h +++ b/programmer.h @@ -424,9 +424,6 @@ extern const struct pcidev_status nics_intel[]; /* nicintel_spi.c */ #if CONFIG_NICINTEL_SPI == 1 int nicintel_spi_init(void); -int nicintel_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -void nicintel_spi_chip_writeb(uint8_t val, chipaddr addr); extern const struct pcidev_status nics_intel_spi[]; #endif -- 1.7.1

1 0

Tested writing vendor bios on asus m2n-e
by Armin Preiml 31 Aug '11

31 Aug '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello flashrom team I've tested writing the latest vendor bios (5001) on the asus m2n-e board. The log is attached. best regards - -- Armin Preiml Student of Computer Science -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iF4EAREIAAYFAk5egjcACgkQxbiSTpmfomFoHwD/T53aesUpjjiCkv6usPYD7PEa Gef+JILXJm3LGqmDBB4A/RFUaOFSYLKA3VhubY+9dJXsF6ocHk6smjh9fwZh/VJl =XN9F -----END PGP SIGNATURE-----

2 1

[PATCH] Revert parts of r1397
by Carl-Daniel Hailfinger 31 Aug '11

31 Aug '11

Hi, the whitespace and coding-style fixes in r1397 changed a few places which should have been left untouched or changed differently for various reasons: - Mixing uninitialized and initialized local variables leads to confusion. - ft2232_spi error cases should have gotten some error handling, and that's the reason the curly braces were there. - Depending on whom you ask about the C99 standard, a comma after the last element of an array initializer will cause another empty array element to be allocated, and that increases array size by 1 and may break some code which assumes certain fields to be nonzero. - Sometimes the introduced linebreaks look worse than before. - Fixing typos/wording in some places would have been nice given that those places were touched anyway. - If we insist on spelling "ASUS" all uppercase because the vendor said so, we have to spell "LPC Bridge" with an uppercase B because the datasheet said so. - #if/#else/#endif are sometimes hard to follow, and a comment at the #endif can improve readability a lot. Comments welcome. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-revert_r1397_partially/it87spi.c =================================================================== --- flashrom-revert_r1397_partially/it87spi.c (Revision 1402) +++ flashrom-revert_r1397_partially/it87spi.c (Arbeitskopie) @@ -203,7 +203,8 @@ int init_superio_ite(void) { - int i, ret = 0; + int i; + int ret = 0; for (i = 0; i < superio_count; i++) { if (superios[i].vendor != SUPERIO_VENDOR_ITE) Index: flashrom-revert_r1397_partially/cli_classic.c =================================================================== --- flashrom-revert_r1397_partially/cli_classic.c (Revision 1402) +++ flashrom-revert_r1397_partially/cli_classic.c (Arbeitskopie) @@ -104,13 +104,14 @@ struct flashchip flashes[3]; struct flashchip *fill_flash; const char *name; - int startchip = 0, chipcount = 0, namelen, opt, option_index = 0; - int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; - int dont_verify_it = 0, list_supported = 0, force = 0; + int namelen, opt, i; + int startchip = 0, chipcount = 0, option_index = 0, force = 0; #if CONFIG_PRINT_WIKI == 1 int list_supported_wiki = 0; #endif - int operation_specified = 0, i, ret = 0; + int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; + int dont_verify_it = 0, list_supported = 0, operation_specified = 0; + int ret = 0; static const char optstring[] = "r:Rw:v:nVEfc:m:l:i:p:Lzh"; static const struct option long_options[] = { Index: flashrom-revert_r1397_partially/dmi.c =================================================================== --- flashrom-revert_r1397_partially/dmi.c (Revision 1402) +++ flashrom-revert_r1397_partially/dmi.c (Arbeitskopie) @@ -196,7 +196,8 @@ */ static int dmi_compare(const char *value, const char *pattern) { - int anchored = 0, patternlen; + int anchored = 0; + int patternlen; msg_pspew("matching %s against %s\n", value, pattern); /* The empty string is part of all strings! */ Index: flashrom-revert_r1397_partially/dediprog.c =================================================================== --- flashrom-revert_r1397_partially/dediprog.c (Revision 1402) +++ flashrom-revert_r1397_partially/dediprog.c (Arbeitskopie) @@ -496,7 +496,8 @@ static int parse_voltage(char *voltage) { char *tmp = NULL; - int i, millivolt, fraction = 0; + int i; + int millivolt = 0, fraction = 0; if (!voltage || !strlen(voltage)) { msg_perr("Empty voltage= specified.\n"); @@ -574,7 +575,8 @@ { struct usb_device *dev; char *voltage; - int millivolt = 3500, ret; + int millivolt = 3500; + int ret; msg_pspew("%s\n", __func__); Index: flashrom-revert_r1397_partially/it85spi.c =================================================================== --- flashrom-revert_r1397_partially/it85spi.c (Revision 1402) +++ flashrom-revert_r1397_partially/it85spi.c (Arbeitskopie) @@ -84,15 +84,15 @@ static int it85xx_scratch_rom_reenter = 0; /* This function will poll the keyboard status register until either - * an expected value shows up, or - * timeout reaches. + * an expected value shows up, or the timeout is reached. + * timeout is in usec. * - * Returns: 0 -- the expected value has shown. - * 1 -- timeout reached. + * Returns: 0 -- the expected value showed up. + * 1 -- timeout. */ static int wait_for(const unsigned int mask, const unsigned int expected_value, - const int timeout /* in usec */, const char *error_message, - const char *function_name, const int lineno) + const int timeout, const char * error_message, + const char * function_name, const int lineno) { int time_passed; @@ -317,8 +317,9 @@ int i; it85xx_enter_scratch_rom(); - /* exit scratch ROM ONLY when programmer shuts down. Otherwise, the - * temporary flash state may halt EC. */ + /* Exit scratch ROM ONLY when programmer shuts down. Otherwise, the + * temporary flash state may halt the EC. + */ #ifdef LPC_IO INDIRECT_A1(shm_io_base, (((unsigned long int)ce_high) >> 8) & 0xff); Index: flashrom-revert_r1397_partially/buspirate_spi.c =================================================================== --- flashrom-revert_r1397_partially/buspirate_spi.c (Revision 1402) +++ flashrom-revert_r1397_partially/buspirate_spi.c (Arbeitskopie) @@ -109,7 +109,7 @@ {"2.6M", 0x5}, {"4M", 0x6}, {"8M", 0x7}, - {NULL, 0x0}, + {NULL, 0x0} }; static int buspirate_spi_shutdown(void *data) @@ -150,9 +150,11 @@ int buspirate_spi_init(void) { unsigned char buf[512]; - int ret = 0, i, spispeed = 0x7; char *dev = NULL; char *speed = NULL; + int spispeed = 0x7; + int ret = 0; + int i; dev = extract_programmer_param("dev"); if (!dev || !strlen(dev)) { Index: flashrom-revert_r1397_partially/physmap.c =================================================================== --- flashrom-revert_r1397_partially/physmap.c (Revision 1402) +++ flashrom-revert_r1397_partially/physmap.c (Arbeitskopie) @@ -76,7 +76,7 @@ mi.address = phys_addr; mi.size = len; - ret = __dpmi_physical_address_mapping (&mi); + ret = __dpmi_physical_address_mapping(&mi); if (ret != 0) return ERROR_PTR; Index: flashrom-revert_r1397_partially/ft2232_spi.c =================================================================== --- flashrom-revert_r1397_partially/ft2232_spi.c (Revision 1402) +++ flashrom-revert_r1397_partially/ft2232_spi.c (Arbeitskopie) @@ -246,17 +246,21 @@ ftdic->error_str); } - if (ftdi_usb_reset(ftdic) < 0) + if (ftdi_usb_reset(ftdic) < 0) { msg_perr("Unable to reset FTDI device\n"); + } - if (ftdi_set_latency_timer(ftdic, 2) < 0) + if (ftdi_set_latency_timer(ftdic, 2) < 0) { msg_perr("Unable to set latency timer\n"); + } - if (ftdi_write_data_set_chunksize(ftdic, 256)) + if (ftdi_write_data_set_chunksize(ftdic, 256)) { msg_perr("Unable to set chunk size\n"); + } - if (ftdi_set_bitmode(ftdic, 0x00, BITMODE_BITBANG_SPI) < 0) + if (ftdi_set_bitmode(ftdic, 0x00, BITMODE_BITBANG_SPI) < 0) { msg_perr("Unable to set bitmode to SPI\n"); + } if (clock_5x) { msg_pdbg("Disable divide-by-5 front stage\n"); @@ -323,7 +327,8 @@ struct ftdi_context *ftdic = &ftdic_context; static unsigned char *buf = NULL; /* failed is special. We use bitwise ops, but it is essentially bool. */ - int i = 0, ret = 0, failed = 0, bufsize; + int i = 0, ret = 0, failed = 0; + int bufsize; static int oldbufsize = 0; if (writecnt > 65536 || readcnt > 65536) Index: flashrom-revert_r1397_partially/chipset_enable.c =================================================================== --- flashrom-revert_r1397_partially/chipset_enable.c (Revision 1402) +++ flashrom-revert_r1397_partially/chipset_enable.c (Arbeitskopie) @@ -309,8 +309,9 @@ static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) { uint32_t fwh_conf; + int i, tmp; char *idsel = NULL; - int i, tmp, max_decode_fwh_idsel = 0, max_decode_fwh_decode = 0; + int max_decode_fwh_idsel = 0, max_decode_fwh_decode = 0; int contiguous = 1; idsel = extract_programmer_param("fwh_idsel"); @@ -1028,8 +1029,8 @@ flashbase = parx << 12; } } else { - msg_pinfo("AMD Elan SC520 detected, but no BOOTCS. " - "Assuming flash at 4G\n"); + msg_pinfo("AMD Elan SC520 detected, but no BOOTCS. Assuming " + "flash at 4G.\n"); } /* 4. Clean up */ Index: flashrom-revert_r1397_partially/flashrom.c =================================================================== --- flashrom-revert_r1397_partially/flashrom.c (Revision 1402) +++ flashrom-revert_r1397_partially/flashrom.c (Arbeitskopie) @@ -600,8 +600,7 @@ size_t size = flash->total_size * 1024; /* Flash registers live 4 MByte below the flash. */ /* FIXME: This is incorrect for nonstandard flashbase. */ - flash->virtual_registers = (chipaddr)programmer_map_flash_region( - "flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); + flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); } int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len) @@ -753,8 +752,9 @@ int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, const char *message) { - int i, ret = 0, failcount = 0; + int i; uint8_t *readbuf = malloc(len); + int ret = 0, failcount = 0; if (!len) goto out_free; @@ -832,7 +832,8 @@ */ int need_erase(uint8_t *have, uint8_t *want, int len, enum write_granularity gran) { - int result = 0, i, j, limit; + int result = 0; + int i, j, limit; switch (gran) { case write_gran_1bit: @@ -898,7 +899,8 @@ static int get_next_write(uint8_t *have, uint8_t *want, int len, int *first_start, enum write_granularity gran) { - int need_write = 0, rel_start = 0, first_len = 0, i, limit, stride; + int need_write = 0, rel_start = 0, first_len = 0; + int i, limit, stride; switch (gran) { case write_gran_1bit: @@ -1326,7 +1328,8 @@ */ static int selfcheck_eraseblocks(const struct flashchip *flash) { - int i, j, k, ret = 0; + int i, j, k; + int ret = 0; for (k = 0; k < NUM_ERASEFUNCTIONS; k++) { unsigned int done = 0; @@ -1451,7 +1454,8 @@ void *param1, void *param2) { int i, j; - unsigned int start = 0, len; + unsigned int start = 0; + unsigned int len; struct block_eraser eraser = flash->block_erasers[erasefunction]; for (i = 0; i < NUM_ERASEREGIONS; i++) { @@ -1603,8 +1607,10 @@ void list_programmers_linebreak(int startcol, int cols, int paren) { const char *pname; - int pnamelen, remaining = 0, firstline = 1, i; + int pnamelen; + int remaining = 0, firstline = 1; enum programmer p; + int i; for (p = 0; p < PROGRAMMER_INVALID; p++) { pname = programmer_table[p].name; @@ -1737,7 +1743,7 @@ msg_gerr("Known laptops table does not exist!\n"); ret = 1; } -#endif +#endif // CONFIG_INTERNAL == 1 return ret; } Index: flashrom-revert_r1397_partially/board_enable.c =================================================================== --- flashrom-revert_r1397_partially/board_enable.c (Revision 1402) +++ flashrom-revert_r1397_partially/board_enable.c (Arbeitskopie) @@ -179,7 +179,7 @@ static const struct winbond_port w83627hf[3] = { UNIMPLEMENTED_PORT, {w83627hf_port2_mux, 0x08, 0, 0xF0}, - UNIMPLEMENTED_PORT, + UNIMPLEMENTED_PORT }; static const struct winbond_mux w83627ehf_port2_mux[8] = { @@ -190,7 +190,7 @@ {0x2A, 0x01, 0x01}, /* or keyboard/mouse interface */ {0x2A, 0x01, 0x01}, {0x2A, 0x01, 0x01}, - {0x2A, 0x01, 0x01}, + {0x2A, 0x01, 0x01} }; static const struct winbond_port w83627ehf[6] = { @@ -199,7 +199,7 @@ UNIMPLEMENTED_PORT, UNIMPLEMENTED_PORT, UNIMPLEMENTED_PORT, - UNIMPLEMENTED_PORT, + UNIMPLEMENTED_PORT }; static const struct winbond_mux w83627thf_port4_mux[8] = { @@ -210,7 +210,7 @@ {0x2D, 0x10, 0x10}, /* or PWROK */ {0x2D, 0x20, 0x20}, /* or suspend LED */ {0x2D, 0x40, 0x40}, /* or panel switch input */ - {0x2D, 0x80, 0x80}, /* or panel switch output */ + {0x2D, 0x80, 0x80} /* or panel switch output */ }; static const struct winbond_port w83627thf[5] = { @@ -218,7 +218,7 @@ UNIMPLEMENTED_PORT, /* GPIO2 */ UNIMPLEMENTED_PORT, /* GPIO3 */ {w83627thf_port4_mux, 0x09, 1, 0xF4}, - UNIMPLEMENTED_PORT, /* GPIO5 */ + UNIMPLEMENTED_PORT /* GPIO5 */ }; static const struct winbond_chip winbond_chips[] = { @@ -812,7 +812,7 @@ { struct pci_dev *dev; - dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 ISA bridge. */ + dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 ISA Bridge. */ if (!dev) { msg_perr("\nERROR: NVIDIA nForce4 ISA bridge not found.\n"); return -1; @@ -860,7 +860,7 @@ return -1; } - /* First, check the ISA bridge */ + /* First, check the ISA Bridge */ dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { case 0x0030: /* CK804 */ @@ -1101,7 +1101,7 @@ struct pci_dev *dev; uint32_t reg; - dev = pci_dev_find(0x1002, 0x4372); /* AMD SMBus controller */ + dev = pci_dev_find(0x1002, 0x4372); /* AMD SMBus Controller */ if (!dev) { msg_perr("\nERROR: AMD SMBus Controller (0x4372) not found.\n"); return -1; @@ -1128,8 +1128,8 @@ struct pci_dev *dev; uint32_t tmp, base; - /* GPPO {0,8,27,28,30} are always available */ - static const uint32_t nonmuxed_gpos = 0x58000101; + /* GPO{0,8,27,28,30} are always available. */ + static const uint32_t nonmuxed_gpos = 0x58000101; static const struct {unsigned int reg, mask, value; } piix4_gpo[] = { {0}, @@ -1178,10 +1178,9 @@ } if ((((1 << gpo) & nonmuxed_gpos) == 0) && - (pci_read_word(dev, piix4_gpo[gpo].reg) - & piix4_gpo[gpo].mask) != piix4_gpo[gpo].value) { - msg_perr("\nERROR: PIIX4 GPO%d not programmed for output.\n", - gpo); + ((pci_read_word(dev, piix4_gpo[gpo].reg) & piix4_gpo[gpo].mask) != + piix4_gpo[gpo].value)) { + msg_perr("\nERROR: PIIX4 GPO%d not programmed for output.\n", gpo); return -1; } @@ -1317,7 +1316,7 @@ /* libpci before version 2.2.4 does not store class info. */ device_class = pci_read_word(dev, PCI_CLASS_DEVICE); if ((dev->vendor_id == 0x8086) && - (device_class == 0x0601)) { /* ISA bridge */ + (device_class == 0x0601)) { /* ISA Bridge */ /* Is this device in our list? */ for (i = 0; intel_ich_gpio_table[i].id; i++) if (dev->device_id == intel_ich_gpio_table[i].id) @@ -1329,7 +1328,7 @@ } if (!dev) { - msg_perr("\nERROR: No known Intel LPC bridge found.\n"); + msg_perr("\nERROR: No Known Intel LPC Bridge found.\n"); return -1; } @@ -1349,12 +1348,12 @@ allowed = (intel_ich_gpio_table[i].bank2 >> (gpio - 64)) & 0x01; if (!allowed) { - msg_perr("\nERROR: This Intel LPC bridge does not allow" - " setting GPIO%02d\n", gpio); + msg_perr("\nERROR: This Intel LPC Bridge does not allow" + " setting GPIO%02d\n", gpio); return -1; } - msg_pdbg("\nIntel ICH LPC bridge: %sing GPIO%02d.\n", + msg_pdbg("\nIntel ICH LPC Bridge: %sing GPIO%02d.\n", raise ? "Rais" : "Dropp", gpio); if (gpio < 32) { @@ -1373,7 +1372,7 @@ if (dev->device_id > 0x2800) { tmp = INL(base); if (!(tmp & (1 << gpio))) { - msg_perr("\nERROR: This Intel LPC bridge" + msg_perr("\nERROR: This Intel LPC Bridge" " does not allow setting GPIO%02d\n", gpio); return -1; @@ -1405,7 +1404,7 @@ if (dev->device_id > 0x2800) { tmp = INL(base + 30); if (!(tmp & (1 << gpio))) { - msg_perr("\nERROR: This Intel LPC bridge" + msg_perr("\nERROR: This Intel LPC Bridge" " does not allow setting GPIO%02d\n", gpio + 32); return -1; @@ -1434,7 +1433,7 @@ tmp = INL(base + 40); if (!(tmp & (1 << gpio))) { - msg_perr("\nERROR: This Intel LPC bridge does " + msg_perr("\nERROR: This Intel LPC Bridge does " "not allow setting GPIO%02d\n", gpio + 64); return -1; } @@ -2091,8 +2090,8 @@ * Match boards on coreboot table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static const struct board_pciid_enable *board_match_coreboot_name( - const char *vendor, const char *part) +static const struct board_pciid_enable *board_match_coreboot_name(const char *vendor, + const char *part) { const struct board_pciid_enable *board = board_pciid_enables; const struct board_pciid_enable *partmatch = NULL; @@ -2144,8 +2143,7 @@ * Match boards on PCI IDs and subsystem IDs. * Second set of IDs can be main only or missing completely. */ -const static struct board_pciid_enable *board_match_pci_card_ids( - enum board_match_phase phase) +const static struct board_pciid_enable *board_match_pci_card_ids(enum board_match_phase phase) { const struct board_pciid_enable *board = board_pciid_enables; -- http://www.hailfinger.org/

2 12

[commit] r1424 - trunk
by repository service 31 Aug '11

31 Aug '11

Author: hailfinger Date: Wed Aug 31 18:19:50 2011 New Revision: 1424 URL: http://flashrom.org/trac/flashrom/changeset/1424 Log: Shorten some board enable related function names Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/flashrom.c trunk/print.c trunk/print_wiki.c trunk/programmer.h Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Sat Aug 27 23:19:56 2011 (r1423) +++ trunk/board_enable.c Wed Aug 31 18:19:50 2011 (r1424) @@ -1974,7 +1974,7 @@ */ /* Please keep this list alphabetically ordered by vendor/board name. */ -const struct board_pciid_enable board_pciid_enables[] = { +const struct board_match board_matches[] = { /* first pci-id set [4], second pci-id set [4], dmi identifier, coreboot id [2], phase, vendor name, board name max_rom_... OK? flash enable */ #if defined(__i386__) || defined(__x86_64__) @@ -2102,11 +2102,11 @@ * Match boards on coreboot table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static const struct board_pciid_enable *board_match_coreboot_name( - const char *vendor, const char *part) +static const struct board_match *board_match_cbname(const char *vendor, + const char *part) { - const struct board_pciid_enable *board = board_pciid_enables; - const struct board_pciid_enable *partmatch = NULL; + const struct board_match *board = board_matches; + const struct board_match *partmatch = NULL; for (; board->vendor_name; board++) { if (vendor && (!board->lb_vendor @@ -2153,12 +2153,11 @@ /* * Match boards on PCI IDs and subsystem IDs. - * Second set of IDs can be main only or missing completely. + * Second set of IDs can be either main+subsystem IDs, main IDs or no IDs. */ -const static struct board_pciid_enable *board_match_pci_card_ids( - enum board_match_phase phase) +const static struct board_match *board_match_pci_ids(enum board_match_phase phase) { - const struct board_pciid_enable *board = board_pciid_enables; + const struct board_match *board = board_matches; for (; board->vendor_name; board++) { if ((!board->first_card_vendor || !board->first_card_device) && @@ -2204,7 +2203,7 @@ return NULL; } -static int unsafe_board_handler(const struct board_pciid_enable *board) +static int unsafe_board_handler(const struct board_match *board) { if (!board) return 1; @@ -2231,9 +2230,9 @@ /* FIXME: Should this be identical to board_flash_enable? */ static int board_handle_phase(enum board_match_phase phase) { - const struct board_pciid_enable *board = NULL; + const struct board_match *board = NULL; - board = board_match_pci_card_ids(phase); + board = board_match_pci_ids(phase); if (unsafe_board_handler(board)) board = NULL; @@ -2262,14 +2261,14 @@ int board_flash_enable(const char *vendor, const char *part) { - const struct board_pciid_enable *board = NULL; + const struct board_match *board = NULL; int ret = 0; if (part) - board = board_match_coreboot_name(vendor, part); + board = board_match_cbname(vendor, part); if (!board) - board = board_match_pci_card_ids(P3); + board = board_match_pci_ids(P3); if (unsafe_board_handler(board)) board = NULL; Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sat Aug 27 23:19:56 2011 (r1423) +++ trunk/flashrom.c Wed Aug 31 18:19:50 2011 (r1424) @@ -1731,7 +1731,7 @@ msg_gerr("Chipset enables table does not exist!\n"); ret = 1; } - if (board_pciid_enables == NULL) { + if (board_matches == NULL) { msg_gerr("Board enables table does not exist!\n"); ret = 1; } Modified: trunk/print.c ============================================================================== --- trunk/print.c Sat Aug 27 23:19:56 2011 (r1423) +++ trunk/print.c Wed Aug 31 18:19:50 2011 (r1424) @@ -203,7 +203,7 @@ const char *devicetype) { int i, boardcount_good = 0, boardcount_bad = 0; - const struct board_pciid_enable *e = board_pciid_enables; + const struct board_match *e = board_matches; const struct board_info *b = boards; int maxvendorlen = strlen("Vendor") + 1; int maxboardlen = strlen("Board") + 1; @@ -241,7 +241,7 @@ msg_ginfo(" "); msg_ginfo((b->working) ? "OK " : "BAD "); - for (e = board_pciid_enables; e->vendor_name != NULL; e++) { + for (e = board_matches; e->vendor_name != NULL; e++) { if (strcmp(e->vendor_name, b->vendor) || strcmp(e->board_name, b->name)) continue; Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Sat Aug 27 23:19:56 2011 (r1423) +++ trunk/print_wiki.c Wed Aug 31 18:19:50 2011 (r1424) @@ -125,7 +125,7 @@ int num_notes = 0; char *notes = calloc(1, 1); char tmp[900 + 1]; - const struct board_pciid_enable *b = board_pciid_enables; + const struct board_match *b = board_matches; for (i = 0; boards[i].vendor != NULL; i++) { if (boards[i].working) Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Aug 27 23:19:56 2011 (r1423) +++ trunk/programmer.h Wed Aug 31 18:19:50 2011 (r1424) @@ -158,7 +158,7 @@ P3 }; -struct board_pciid_enable { +struct board_match { /* Any device, but make it sensible, like the ISA bridge. */ uint16_t first_vendor; uint16_t first_device; @@ -190,7 +190,7 @@ int (*enable) (void); /* May be NULL. */ }; -extern const struct board_pciid_enable board_pciid_enables[]; +extern const struct board_match board_matches[]; struct board_info { const char *vendor;

1 0

[PATCH] add SPI interface support for Tunnel Creek chipset
by Feldschmid, Ingo 30 Aug '11

30 Aug '11

The Intel Tunnel Creek chipset supports both an SPI and an LPC bus. Set chipset table entry for Tunnel Creek to new function "enable_flash_tunnelcreek", which will read the hardware straps and return support for the bus that has been used for booting. This function uses "ich_init_spi" with ich_generation set to 7 for initializing the SPI bus if necessary. SPI functionality tested on actual hardware (see attached file flashrom.log), Tunnel Creek LPC interface not tested yet (missing hardware for that). Signed-off-by: Ingo Feldschmid <ifel(a)msc-ge.com> <<tunnelcreek.patch>> <<flashrom.log>> Es gelten unsere Allgemeinen Leistungsbedingungen die unter http://www.msc-ge.com/alb abrufbar sind. Our standard terms and conditions apply which are available under http://www.msc-ge.com/alb . MSC Vertriebs GmbH Sitz der Gesellschaft: Industriestrasse 16, 76297 Stutensee Handelsregister: Mannheim, HRB Nr. 10 3631 Geschaftsfuhrung: Manfred Schwarztrauber, Lothar Kummerlin, Rudiger Kuhn, Silvano Geissler Umsatzsteuer ID Nr.: DE 143 585 507 WEEE Reg. Nr. : DE 31011852 Gleichmann & Co. Electronics GmbH Sitz der Gesellschaft: Schraderstrasse 44, 67227 Frankenthal Handelsregister: Ludwigshafen, HRB Nr. 21305 Geschaftsfuhrung: Manfred Schwarztrauber, Thomas Klein Umsatzsteuer ID Nr. : DE 148 421 329 WEEE Reg. Nr.: DE 72277043 Diese E-Mail enthalt vertrauliche und/ oder rechtlich geschutzte Informationen. Wenn Sie nicht der beabsichtigte Empfanger sind, informieren Sie bitte sofort den Absender und loschen Sie diese E-Mail. The information contained in this message is confidential and/ or protected by law. If you are not the intended recipient, please contact the sender and delete this message.

2 1

Re: [flashrom] alix2d13, AMD CS5536: problem report with v0.9.2-r1141
by Paul Menzel 30 Aug '11

30 Aug '11

Dear Bill, thank you for report. Am Montag, den 29.08.2011, 14:36 -0700 schrieb Bill Larson: > Here is the message I get when running flashrom. > > root@voyage:~# flashrom > flashrom v0.9.2-r1141 on Linux 2.6.33.7-rt29-voyage (i586), built with libpci 3. > 1.7, GCC 4.4.5 20100728 (prerelease), little endian > flashrom is free software, get the source code at http://www.flashrom.org Please try a newer version like 0.9.4 or directly from SVN [1]. > Calibrating delay loop... OK. > No coreboot table found. > sh: dmidecode: not found > dmidecode execution unsucessfull - continuing without DMI info > Found chipset "AMD CS5536", enabling flash write... OK. > WARNING: unexpected second chipset match: "AMD CS5536" > ignoring, please report lspci and board URL to flashrom(a)flashrom.org! > This chipset supports the following protocols: Non-SPI. > Found chip "AMIC A49LF040A" (512 KB, LPC) at physical address 0xfff80000. > No operations were specified. > > I'm running it on a PC Engines alix2d13 board. > > http://pcengines.ch/alix2d13.htm > > And the lspci results > > 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host > Bridge (rev 33) > 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX A > ES Security Block > 00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) > > 00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) > > 00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) > > 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (r > ev 03) > 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE > (rev 01) > 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OH > C (rev 02) > 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EH > C (rev 02) Please turn off line wrapping when inserting stuff. Thanks, Paul [1] http://flashrom.org/Downloads

1 0

problem report
by Bill Larson 29 Aug '11

29 Aug '11

Here is the message I get when running flashrom. root@voyage:~# flashrom flashrom v0.9.2-r1141 on Linux 2.6.33.7-rt29-voyage (i586), built with libpci 3. 1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. sh: dmidecode: not found dmidecode execution unsucessfull - continuing without DMI info Found chipset "AMD CS5536", enabling flash write... OK. WARNING: unexpected second chipset match: "AMD CS5536" ignoring, please report lspci and board URL to flashrom(a)flashrom.org! This chipset supports the following protocols: Non-SPI. Found chip "AMIC A49LF040A" (512 KB, LPC) at physical address 0xfff80000. No operations were specified. I'm running it on a PC Engines alix2d13 board. http://pcengines.ch/alix2d13.htm And the lspci results 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33) 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX A ES Security Block 00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) 00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) 00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (r ev 03) 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OH C (rev 02) 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EH C (rev 02)

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom