- flashrom - mail.coreboot.org

[commit] r1452 - trunk
by repository service 20 Oct '11

20 Oct '11

Author: stefanct Date: Thu Oct 20 14:57:14 2011 New Revision: 1452 URL: http://flashrom.org/trac/flashrom/changeset/1452 Log: ichspi: add (partially) dead support code for Intel Hardware Sequencing This was done to ease the review. Another patch will hook up (and explain) this code later. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ich_descriptors.c trunk/ich_descriptors.h trunk/ichspi.c Modified: trunk/ich_descriptors.c ============================================================================== --- trunk/ich_descriptors.c Fri Oct 14 22:33:14 2011 (r1451) +++ trunk/ich_descriptors.c Thu Oct 20 14:57:14 2011 (r1452) @@ -213,6 +213,34 @@ msg_pdbg2("\n"); } +/** Returns the integer representation of the component density with index +idx in bytes or 0 if a correct size can not be determined. */ +int getFCBA_component_density(const struct ich_descriptors *desc, uint8_t idx) +{ + uint8_t size_enc; + + switch(idx) { + case 0: + size_enc = desc->component.comp1_density; + break; + case 1: + if (desc->content.NC == 0) + return 0; + size_enc = desc->component.comp2_density; + break; + default: + msg_perr("Only ICH SPI component index 0 or 1 are supported " + "yet.\n"); + return 0; + } + if (size_enc > 5) { + msg_perr("Density of ICH SPI component with index %d is " + "invalid. Encoded density is 0x%x.\n", idx, size_enc); + return 0; + } + return (1 << (19 + size_enc)); +} + static uint32_t read_descriptor_reg(uint8_t section, uint16_t offset, void *spibar) { uint32_t control = 0; Modified: trunk/ich_descriptors.h ============================================================================== --- trunk/ich_descriptors.h Fri Oct 14 22:33:14 2011 (r1451) +++ trunk/ich_descriptors.h Thu Oct 20 14:57:14 2011 (r1452) @@ -255,6 +255,7 @@ void prettyprint_ich_descriptor_master(const struct ich_desc_master *master); int read_ich_descriptors_via_fdo(void *spibar, struct ich_descriptors *desc); +int getFCBA_component_density(const struct ich_descriptors *desc, uint8_t idx); #endif /* __ICH_DESCRIPTORS_H__ */ #endif /* defined(__i386__) || defined(__x86_64__) */ Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Fri Oct 14 22:33:14 2011 (r1451) +++ trunk/ichspi.c Thu Oct 20 14:57:14 2011 (r1452) @@ -26,6 +26,7 @@ #if defined(__i386__) || defined(__x86_64__) #include <string.h> +#include <stdlib.h> #include "flash.h" #include "programmer.h" #include "spi.h" @@ -1080,6 +1081,77 @@ return result; } +#if 0 +/* Sets FLA in FADDR to (addr & 0x01FFFFFF) without touching other bits. */ +static void ich_hwseq_set_addr(uint32_t addr) +{ + uint32_t addr_old = REGREAD32(ICH9_REG_FADDR) & ~0x01FFFFFF; + REGWRITE32(ICH9_REG_FADDR, (addr & 0x01FFFFFF) | addr_old); +} + +/* Sets FADDR.FLA to 'addr' and returns the erase block size in bytes + * of the block containing this address. May return nonsense if the address is + * not valid. The erase block size for a specific address depends on the flash + * partition layout as specified by FPB and the partition properties as defined + * by UVSCC and LVSCC respectively. An alternative to implement this method + * would be by querying FPB and the respective VSCC register directly. + */ +static uint32_t ich_hwseq_get_erase_block_size(unsigned int addr) +{ + uint8_t enc_berase; + static const uint32_t const dec_berase[4] = { + 256, + 4 * 1024, + 8 * 1024, + 64 * 1024 + }; + + ich_hwseq_set_addr(addr); + enc_berase = (REGREAD16(ICH9_REG_HSFS) & HSFS_BERASE) >> + HSFS_BERASE_OFF; + return dec_berase[enc_berase]; +} + +/* Polls for Cycle Done Status, Flash Cycle Error or timeout in 8 us intervals. + Resets all error flags in HSFS. + Returns 0 if the cycle completes successfully without errors within + timeout us, 1 on errors. */ +static int ich_hwseq_wait_for_cycle_complete(unsigned int timeout, + unsigned int len) +{ + uint16_t hsfs; + uint32_t addr; + + timeout /= 8; /* scale timeout duration to counter */ + while ((((hsfs = REGREAD16(ICH9_REG_HSFS)) & + (HSFS_FDONE | HSFS_FCERR)) == 0) && + --timeout) { + programmer_delay(8); + } + REGWRITE16(ICH9_REG_HSFS, REGREAD16(ICH9_REG_HSFS)); + if (!timeout) { + addr = REGREAD32(ICH9_REG_FADDR) & 0x01FFFFFF; + msg_perr("Timeout error between offset 0x%08x and " + "0x%08x + %d (=0x%08x)!\n", + addr, addr, len - 1, addr + len - 1); + prettyprint_ich9_reg_hsfs(hsfs); + prettyprint_ich9_reg_hsfc(REGREAD16(ICH9_REG_HSFC)); + return 1; + } + + if (hsfs & HSFS_FCERR) { + addr = REGREAD32(ICH9_REG_FADDR) & 0x01FFFFFF; + msg_perr("Transaction error between offset 0x%08x and " + "0x%08x (=0x%08x + %d)!\n", + addr, addr + len - 1, addr, len - 1); + prettyprint_ich9_reg_hsfs(hsfs); + prettyprint_ich9_reg_hsfc(REGREAD16(ICH9_REG_HSFC)); + return 1; + } + return 0; +} +#endif + static int ich_spi_send_multicommand(struct spi_command *cmds) { int ret = 0; @@ -1250,21 +1322,18 @@ uint8_t old, new; uint16_t spibar_offset, tmp2; uint32_t tmp; - int ichspi_desc = 0; + int desc_valid = 0; switch (ich_generation) { case 7: - register_spi_programmer(&spi_programmer_ich7); spibar_offset = 0x3020; break; case 8: - register_spi_programmer(&spi_programmer_ich9); spibar_offset = 0x3020; break; case 9: case 10: default: /* Future version might behave the same */ - register_spi_programmer(&spi_programmer_ich9); spibar_offset = 0x3800; break; } @@ -1275,8 +1344,8 @@ /* Assign Virtual Address */ ich_spibar = rcrb + spibar_offset; - switch (spi_programmer->type) { - case SPI_CONTROLLER_ICH7: + switch (ich_generation) { + case 7: msg_pdbg("0x00: 0x%04x (SPIS)\n", mmio_readw(ich_spibar + 0)); msg_pdbg("0x02: 0x%04x (SPIC)\n", @@ -1313,9 +1382,13 @@ ichspi_lock = 1; } ich_set_bbar(ich_generation, 0); + register_spi_programmer(&spi_programmer_ich7); ich_init_opcodes(); break; - case SPI_CONTROLLER_ICH9: + case 8: + case 9: + case 10: + default: /* Future version might behave the same */ tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS); msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2); prettyprint_ich9_reg_hsfs(tmp2); @@ -1324,8 +1397,8 @@ ichspi_lock = 1; } if (tmp2 & HSFS_FDV) - ichspi_desc = 1; - if (!(tmp2 & HSFS_FDOPSS) && ichspi_desc) + desc_valid = 1; + if (!(tmp2 & HSFS_FDOPSS) && desc_valid) msg_pinfo("The Flash Descriptor Security Override " "Strap-Pin is set. Restrictions implied\n" "by the FRAP and FREG registers are NOT in " @@ -1400,18 +1473,16 @@ } msg_pdbg("\n"); - if (ichspi_desc) { + if (desc_valid) { struct ich_descriptors desc = {{ 0 }}; if (read_ich_descriptors_via_fdo(ich_spibar, &desc) == ICH_RET_OK) prettyprint_ich_descriptors(CHIPSET_ICH_UNKNOWN, &desc); } + register_spi_programmer(&spi_programmer_ich9); ich_init_opcodes(); break; - default: - /* Nothing */ - break; } old = pci_read_byte(dev, 0xdc);

1 0

Re: [flashrom] AMD - SP5100 - take SPI ownership (2/2)
by Thomas Gstädtner 19 Oct '11

19 Oct '11

On -10.01.-28163 20:59, Frederic Temporelli wrote: > Hello, > > > Here's the second patch that will remove the write protection. > If this patch isn't applied, even if SPI owenrship is ok, flashrom won't be able to write BIOS > > Best regards > > --- > Fred > > diff -ur ../flashrom-0.9.4-r1394-sp5100/sb600spi.c ./sb600spi.c > --- ../flashrom-0.9.4-r1394-sp5100/sb600spi.c 2011-07-29 22:45:48.693159918 -0400 > +++ ./sb600spi.c 2011-08-01 12:39:31.043163924 -0400 > @@ -381,23 +381,7 @@ > return 0; > } > > - reg = pci_read_byte(dev, 0x40); > - msg_pdbg("SB700 IMC is %sactive.\n", (reg & (1 << 7)) ? "" : "not "); > - if (reg & (1 << 7)) { > - /* If we touch any region used by the IMC, the IMC and the SPI > - * interface will lock up, and the only way to recover is a > - * hard reset, but that is a bad choice for a half-erased or > - * half-written flash chip. > - * There appears to be an undocumented register which can freeze > - * or disable the IMC, but for now we want to play it safe. > - */ > - msg_perr("The SB700 IMC is active and may interfere with SPI " > - "commands. Disabling write.\n"); > - /* FIXME: Should we only disable SPI writes, or will the lockup > - * affect LPC/FWH chips as well? > - */ > - programmer_may_write = 0; > - } > + programmer_may_write = 1; > > /* Bring the FIFO to a clean state. */ > reset_internal_fifo_pointer(); Acked-by: Thomas Gstaedtner <thomas(a)gstaedtner.net> I tested this patch (along with 1/2 of course) on live hardware (>10 reads, >10 erase/writes) and it works fine for me. Tested on: Supermicro H8SCM-F-O, AMD SP5100 Please note, that I did no proper code review, I only tested, so let me know if the "acked-by" sign-off should not be used here. It did not seem like you used the Tested-by sign-off. thomasg

1 0

foxconn 945GZ7MC-KS2H
by Dimka Shkyratov 19 Oct '11

19 Oct '11

foxconn 945GZ7MC-KS2H lspci -nnvvvxxx http://paste.flashrom.org/view.php?id=863 BIOS httflashrom@flashrom.orgp://www.foxconnsupport.com/download.aspx?models=en-us0000220&category=C000000001&Series=en-us0000002&keywords=&sort=<http://www.foxconnsupport.com/download.aspx?models=en-us0000220&category=C0…> flashrom -VV http://paste.flashrom.org/view.php?id=864 dmidecode + biosdecode http://paste.flashrom.org/view.php?id=865 dmesg http://paste.flashrom.org/view.php?id=866

1 0

Re: [flashrom] Fwd: Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte
by Stefan Tauner 18 Oct '11

18 Oct '11

On Mon, 17 Oct 2011 01:45:45 -0400 Sherwin Price <sherwin.price(a)niksoft.com> wrote: > after write and verified. > > ---------- Forwarded message ---------- > From: Sherwin Price <sherwin.price(a)niksoft.com> > Date: Mon, Oct 17, 2011 at 1:04 AM > Subject: Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte > To: flashrom(a)flashrom.org > > > Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte > > Award BIOS > Hello Sherwin, Thanks for your report! I have marked the chipset as tested and will commit that later together with other small changes. There are two revisions of your board: 1.0: http://www.gigabyte.com/fileupload/product/2/3854/4279_big.jpg and 1.3: http://www.gigabyte.com/fileupload/product/2/3974/4929_big.jpg They look almost identical and are probably indistinguishable from each other for flashrom, but for the record I'd like to know which one you got? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

NVIDIA MCP78S
by Loose Cannon 17 Oct '11

17 Oct '11

ASUS M3N78-VM

1 0

Re: [flashrom] Atmel AT49F002NT-90PC - Erase OK - Write FAIL
by Stefan Tauner 17 Oct '11

17 Oct '11

On Mon, 17 Oct 2011 19:25:47 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > Tested using hot swap in this board > http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html > already reported. > > Erase works (I compared the chip content before and after), but the > write process fails. I can easily test if you need, because I have a > backup BIOS chip. > hi and thanks for your report! to me it looks like erase is also failing. your -VE log shows: > Erasing and writing flash chip... Trying erase function 0... 0x000000-0x01ffff:E, 0x020000-0x037fff:E, 0x038000-0x039fff:E, 0x03a000-0x03bfff:EERASE FAILED at 0x0003a705! Expected=0xff, Read=0xfd, failed byte count from 0x0003a000-0x0003bfff: 0x39 > ERASE FAILED! > Reading current flash chip contents... done. Looking for another erase function. > Trying erase function 1... 0x000000-0x03ffff:EERASE FAILED at 0x0003a737! Expected=0xff, Read=0xfe, failed byte count from 0x00000000-0x0003ffff: 0x1b > ERASE FAILED! > Looking for another erase function. > No usable erase functions left. > FAILED! then writing will fail too of course... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] AMIC A290021T-70 - Erase/Write OK
by Stefan Tauner 17 Oct '11

17 Oct '11

On Mon, 17 Oct 2011 19:11:54 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > Tested using hot swap in this board > http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html > already reported. > > Marcos Hello Marcos, Thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Macronix MX29F002NTPC-12 - Erase/Write OK
by Stefan Tauner 17 Oct '11

17 Oct '11

On Mon, 17 Oct 2011 19:06:22 -0200 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > Tested using hot swap in this board > http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html > already reported. > > Marcos Hello Marcos, Thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Fwd: Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte
by Bernd Blaauw 17 Oct '11

17 Oct '11

Op 17-10-2011 7:45, Sherwin Price schreef: > after write and verified. Your log claims "No operations were specified." rather than being first who can write modern Intel chipsets/firmware. I thought flashrom by now would echo the commandline it was invoked with, but apparently not. > Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte > > Award BIOS

2 1

Failure in ASUS P8B WS
by Cristian Rodríguez 17 Oct '11

17 Oct '11

Hi: here is the report from an ASUS PB8 WS motherboard, in the hope someone can take a look at it and support it in later releases flashrom -r bios.bin flashrom v0.9.4-r1450 on Linux 3.1.0-rc9-7-default (x86_64), built with libpci 3.1.7, GCC 4.6.1 20111012 [gcc-4_6-branch revision 179856], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel C206". This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... OK. This chipset supports the following protocols: FWH, SPI. Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Reading flash... Transaction error! Read operation failed! FAILED. ➜ updates-hw flashrom -V flashrom v0.9.4-r1450 on Linux 3.1.0-rc9-7-default (x86_64), built with libpci 3.1.7, GCC 4.6.1 20111012 [gcc-4_6-branch revision 179856], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3297M loops per second, 10 myus = 10 us, 100 myus = 109 us, 1000 myus = 1007 us, 10000 myus = 10006 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P8B WS" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel C206" with PCI ID 8086:1c56. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0xc24: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 (FREG0: Flash Descriptor) 0x00000000-0x00000fff is read-only 0x58: 0x03ff0180 (FREG1: BIOS) 0x00180000-0x003fffff is read-write 0x5C: 0x017f0001 (FREG2: Management Engine) 0x00001000-0x0017ffff is locked 0x60: 0x00000fff (FREG3: Gigabit Ethernet) Gigabit Ethernet region is unused. 0x64: 0x00000fff (FREG4: Platform Data) Platform Data region is unused. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbd, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x48, id2 0x44, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x48, id2 0x44, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x0b, id2 0xe9, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x15 Found Winbond flash chip "W25Q32" (4096 kB, SPI). No operations were specified. Restoring MMIO space at 0x7fad4294f89c Restoring MMIO space at 0x7fad4294f898 Restoring MMIO space at 0x7fad4294f896 Restoring MMIO space at 0x7fad4294f894 Restoring MMIO space at 0x7fad4294f8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Atmel AT49F002NT-90PC - Erase OK - Write FAIL
by Marcos Felipe Rasia de Mello 17 Oct '11

17 Oct '11

Tested using hot swap in this board http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html already reported. Erase works (I compared the chip content before and after), but the write process fails. I can easily test if you need, because I have a backup BIOS chip. Marcos

1 0

AMIC A290021T-70 - Erase/Write OK
by Marcos Felipe Rasia de Mello 17 Oct '11

17 Oct '11

Tested using hot swap in this board http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html already reported. Marcos

1 0

Macronix MX29F002NTPC-12 - Erase/Write OK
by Marcos Felipe Rasia de Mello 17 Oct '11

17 Oct '11

Tested using hot swap in this board http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html already reported. Marcos

1 0

Fwd: Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte
by Sherwin Price 16 Oct '11

16 Oct '11

after write and verified. ---------- Forwarded message ---------- From: Sherwin Price <sherwin.price(a)niksoft.com> Date: Mon, Oct 17, 2011 at 1:04 AM Subject: Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte To: flashrom(a)flashrom.org Intel Z68 - GA-Z68MX-UD2H-B3 mainboard from Gigabyte Award BIOS -- *Sherwin Price* *443-310-8410 NikSoft Systems Corp An SBA Certified 8(a) Company* -- *Sherwin Price* *443-310-8410 NikSoft Systems Corp An SBA Certified 8(a) Company*

1 0

coreboot support for laptop HP 635 with AMD E-350 CPU: system data/information (flashrom, lspci, superiotool)
by Paul Menzel 15 Oct '11

15 Oct '11

Dear coreboot and flashrom folks, Carl-Daniel asked me on IRC to relay the following information to you list subscribers. In summary Carl-Daniel is trying to get the HP 635 laptop supported by flashrom and to port coreboot to it. In this message you will find the information/data/specifications [1] Carl-Daniel found out until now attached and the URL of the file in flashrom’s file upload service. The HP 635 is a laptop with a AMD E-350 CPU and costs inclusive shipping 269 € (price comparison: [2]). flashrom runs on the system but does not find a chip [3]. Found chipset "AMD SB700/SB710/SB750/SB850" with PCI ID 1002:439d Super I/O ID 0x8518 is not on the list of flash capable controllers “This means we not only have a really well-supported chipset (AMD RS880M/A50M) the EC in that laptop ITE IT8518 is well-documented as well. I have the IT8512 docs and they are quite extensive. Does anyone have ITE IT8518 docs?” “Ah yes, indeed an ITE EC: The BIOS image contains "EC-V11 Copyright ITE Tech. Inc.. This also means we can ask ITE nicely for distribution rights without worrying about some closed bios vendor having a copyright on that EC image.” Output of `lspci` [4] and of `superiotool` [5] are also available. The forced dump of the BIOS image [6] has a size of 2 MB and probably contains some garbage. The access is restricted to a few though. The executable of the BIOS upgrade file [7, probably different version] can be extracted using `cabextract` [8]. Uwe noted the following. SCH5317 is LPC, so unlikely to be the match, yes. SMSC _does_ have some ECs though IIRC Carl-Daniel will probably not have any Internet access during the next two weeks. But I guess when getting back he would be delighted if he receives some answer from other interested people porting the HP 635 and he could get the documentation of the EC he asked for. I do not know if he starts hacking and for example already works on the flashrom support. Please join the channels #flashrom or #coreboot to get a hold of him and discuss these issues with Carl-Daniel and the rest of the coreboot/flashrom folks. Thanks, Paul PS: Stefan, Uwe, I hope this message is what Carl-Daniel expected. If not please correct my mistakes. [1] http://www.coreboot.org/FAQ#Will_coreboot_work_on_my_machine.3F [2] http://www.heise.de/preisvergleich/638422 [3] http://paste.flashrom.org/view.php?id=851 [4] http://paste.flashrom.org/view.php?id=852 [5] http://paste.flashrom.org/view.php?id=853 [6] http://paste.flashrom.org/view.php?id=854 size: 2097152 bytes md5sum 31147d4d0371fb9bedc7c2cc01eb96ef [7] ftp://ftp.hp.com/pub/softpaq/sp54001-54500/sp54155.exe [8] http://www.cabextract.org.uk/

1 0

[PATCH] Add a bunch of new/tested stuff and various small changes 8
by Stefan Tauner 14 Oct '11

14 Oct '11

Tested mainboards: OK: - ASUS Crosshair II Formula http://www.flashrom.org/pipermail/flashrom/2011-September/007888.html - ASUS M2N-E SLI http://www.flashrom.org/pipermail/flashrom/2011-September/007909.html - ASUS M3N78-VM http://www.flashrom.org/pipermail/flashrom/2011-May/006496.html - ASUS M4A78LT-M LE http://www.flashrom.org/pipermail/flashrom/2011-September/007869.html - MSI A75MA-G55 (MS-7696) http://www.flashrom.org/pipermail/flashrom/2011-October/008055.html - PCCHIPS M598LMR (V9.0) http://www.flashrom.org/pipermail/flashrom/2011-October/008051.html - ECS P4VXMS (V1.0A) http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html - GIGABYTE GA-P67A-UD3P http://www.flashrom.org/pipermail/flashrom/2011-September/007930.html - ZOTAC Fusion-ITX WiFi (FUSION350-A-E) http://www.flashrom.org/pipermail/flashrom/2011-October/008011.html NOT OK: - ASUS P8B-E/4L http://www.flashrom.org/pipermail/flashrom/2011-October/008047.html Tested chipsets: - MCP78S (:075d) http://www.flashrom.org/pipermail/flashrom/2011-August/007612.html - VT8233 (:3074) http://www.flashrom.org/pipermail/flashrom/2011-September/007986.html - SiS 530 (:0530) http://www.flashrom.org/pipermail/flashrom/2011-October/008051.html - P67 (:1c46) http://www.flashrom.org/pipermail/flashrom/2011-September/007930.html Tested flash chips: - mark Pm39LV040 as TEST_OK_PR http://www.flashrom.org/pipermail/flashrom/2011-September/007942.html - mark Pm39LV010 as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-September/007942.html - mark SST49LF008A as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-September/007989.html - mark SyncMOS {F,S,V}29C51002T as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-October/008052.html - mark EON EN29F002(A)(N)T as TEST_OK_PREW http://www.flashrom.org/pipermail/flashrom/2011-October/008053.html - remove superfluous line break in enable_flash_ich_dc_spi - m->M in "min" and "max" (voltage) in print_wiki.c - spi25: get rid of unneccessary line breaks (on failed probes) which is Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> - rayer_spi.c: Remove double word: `s/the the/the/` which is Signed-off-by: Paul Menzel <paulepanter(a)users.sourceforge.net> everything else is Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- chipset_enable.c | 10 +++++----- flashchips.c | 10 +++++----- print.c | 10 ++++++++++ print_wiki.c | 2 +- rayer_spi.c | 2 +- spi25.c | 4 ---- 6 files changed, 22 insertions(+), 16 deletions(-) diff --git a/chipset_enable.c b/chipset_enable.c index 1c7eb31..61c6bc4 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -536,7 +536,7 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, /* Get physical address of Root Complex Register Block */ tmp = pci_read_long(dev, 0xf0) & 0xffffc000; - msg_pdbg("\nRoot Complex Register Block address = 0x%x\n", tmp); + msg_pdbg("Root Complex Register Block address = 0x%x\n", tmp); /* Map RCBA to virtual memory */ rcrb = physmap("ICH RCRB", tmp, 0x4000); @@ -1138,7 +1138,7 @@ const struct penable chipset_enables[] = { {0x1022, 0x780e, OK, "AMD", "Hudson", enable_flash_sb600}, {0x1039, 0x0406, NT, "SiS", "501/5101/5501", enable_flash_sis501}, {0x1039, 0x0496, NT, "SiS", "85C496+497", enable_flash_sis85c496}, - {0x1039, 0x0530, NT, "SiS", "530", enable_flash_sis530}, + {0x1039, 0x0530, OK, "SiS", "530", enable_flash_sis530}, {0x1039, 0x0540, NT, "SiS", "540", enable_flash_sis540}, {0x1039, 0x0620, NT, "SiS", "620", enable_flash_sis530}, {0x1039, 0x0630, NT, "SiS", "630", enable_flash_sis540}, @@ -1205,7 +1205,7 @@ const struct penable chipset_enables[] = { {0x10de, 0x0443, NT, "NVIDIA", "MCP65", enable_flash_mcp6x_7x}, {0x10de, 0x0548, OK, "NVIDIA", "MCP67", enable_flash_mcp6x_7x}, {0x10de, 0x075c, NT, "NVIDIA", "MCP78S", enable_flash_mcp6x_7x}, - {0x10de, 0x075d, NT, "NVIDIA", "MCP78S", enable_flash_mcp6x_7x}, + {0x10de, 0x075d, OK, "NVIDIA", "MCP78S", enable_flash_mcp6x_7x}, {0x10de, 0x07d7, NT, "NVIDIA", "MCP73", enable_flash_mcp6x_7x}, {0x10de, 0x0aac, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x}, {0x10de, 0x0aad, NT, "NVIDIA", "MCP79", enable_flash_mcp6x_7x}, @@ -1222,7 +1222,7 @@ const struct penable chipset_enables[] = { {0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111}, {0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111}, {0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111}, - {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x}, + {0x1106, 0x3074, OK, "VIA", "VT8233", enable_flash_vt823x}, {0x1106, 0x3147, OK, "VIA", "VT8233A", enable_flash_vt823x}, {0x1106, 0x3177, OK, "VIA", "VT8235", enable_flash_vt823x}, {0x1106, 0x3227, OK, "VIA", "VT8237", enable_flash_vt823x}, @@ -1237,7 +1237,7 @@ const struct penable chipset_enables[] = { {0x8086, 0x122e, OK, "Intel", "PIIX", enable_flash_piix4}, {0x8086, 0x1234, NT, "Intel", "MPIIX", enable_flash_piix4}, {0x8086, 0x1c44, NT, "Intel", "Z68", enable_flash_pch6}, - {0x8086, 0x1c46, NT, "Intel", "P67", enable_flash_pch6}, + {0x8086, 0x1c46, OK, "Intel", "P67", enable_flash_pch6}, {0x8086, 0x1c47, NT, "Intel", "UM67", enable_flash_pch6}, {0x8086, 0x1c49, NT, "Intel", "HM65", enable_flash_pch6}, {0x8086, 0x1c4a, OK, "Intel", "H67", enable_flash_pch6}, diff --git a/flashchips.c b/flashchips.c index d520a1c..730e920 100644 --- a/flashchips.c +++ b/flashchips.c @@ -3550,7 +3550,7 @@ const struct flashchip flashchips[] = { .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -5268,7 +5268,7 @@ const struct flashchip flashchips[] = { .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -5328,7 +5328,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = @@ -6482,7 +6482,7 @@ const struct flashchip flashchips[] = { .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -7763,7 +7763,7 @@ const struct flashchip flashchips[] = { .total_size = 256, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = diff --git a/print.c b/print.c index bcb1629..ae35bdf 100644 --- a/print.c +++ b/print.c @@ -590,6 +590,7 @@ const struct board_info boards_known[] = { B("ASUS", "A8V Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU", NULL), B("ASUS", "A8V-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=hQBPIJWEZnnGAZEh", NULL), B("ASUS", "A8V-E SE", 1, "http://www.asus.com/product.aspx?P_ID=VMfiJJRYTHM4gXIi", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"), + B("ASUS", "Crosshair II Formula", 1, "http://www.asus.com/product.aspx?P_ID=EIDxaW1Ln3YR9RA2", NULL), B("ASUS", "Crosshair IV Extreme", 1, "http://www.asus.com/product.aspx?P_ID=lt1ShF6xEn3rlLe7", NULL), B("ASUS", "E35M1-I DELUXE", 1, "http://www.asus.com/product.aspx?P_ID=9BmKhMwWCwqyl1lz", NULL), B("ASUS", "K8V", 1, "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm", NULL), @@ -600,6 +601,7 @@ const struct board_info boards_known[] = { B("ASUS", "M2A-VM", 1, "http://www.asus.com/product.aspx?P_ID=St3pWpym8xXpROQS", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html"), B("ASUS", "M2N32-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=0jMy2X8lKstYRvev", NULL), B("ASUS", "M2N-E", 1, "http://www.asus.com/product.aspx?P_ID=NFlvt10av3F7ayQ9", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), + B("ASUS", "M2N-E SLI", 1, "http://www.asus.com/product.aspx?P_ID=NJ8fkR6ufRM9XvFC", NULL), B("ASUS", "M2N-SLI Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=szSFtrap7crpBaQE", NULL), B("ASUS", "M2NBP-VM CSM", 1, "http://www.asus.com/product.aspx?P_ID=MnOfzTGd2KkwG0rF", NULL), B("ASUS", "M2NPV-VM", 1, "http://www.asus.com/product.aspx?P_ID=HGTVnGv5nGahCYgK", NULL), @@ -608,9 +610,11 @@ const struct board_info boards_known[] = { B("ASUS", "M3A", 1, "http://www.asus.com/product.aspx?P_ID=P48rppKk4jrc9pNd", NULL), B("ASUS", "M3A76-CM", 1, "http://www.asus.com/product.aspx?P_ID=aU8effdifLvraVze", NULL), B("ASUS", "M3A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=KjpYqzmAd9vsTM2D", NULL), + B("ASUS", "M3N78-VM", 1, "http://www.asus.com/product.aspx?P_ID=ovqEgLFRjnSClhSV", NULL), B("ASUS", "M4A78-EM", 1, "http://www.asus.com/product.aspx?P_ID=0KyowHKUFAQqH2DO", NULL), B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/product.aspx?P_ID=fcsXWSxnhzZE9rnR", NULL), B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/product.aspx?P_ID=QHbvGVB1mXmmD8qQ", NULL), + B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/product.aspx?P_ID=exJL00uovTJaDqxR", NULL), B("ASUS", "M4A79T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=lhJiLTN5huPfCVkW", NULL), B("ASUS", "M4A87TD/USB3", 1, "http://www.asus.com/product.aspx?P_ID=nlWYrI9wlNIYHAaa", NULL), B("ASUS", "M6Ne", 0, "http://www.asus.com/Product.aspx?P_ID=IbqN4JCxeRiep4WN", "Untested board enable."), @@ -659,6 +663,7 @@ const struct board_info boards_known[] = { B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), B("ASUS", "P7H57D-V EVO", 1, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL), B("ASUS", "P7H55-M LX", 0, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"), + B("ASUS", "P8B-E/4L", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "N68S3+", 1, NULL, NULL), @@ -677,6 +682,7 @@ const struct board_info boards_known[] = { B("Elitegroup", "K7S6A", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&C…", NULL), B("Elitegroup", "K7VTA3", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&…", NULL), B("Elitegroup", "P4M800PRO-M (V1.0A)", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), + B("Elitegroup", "P4VXMS (V1.0A)", 1, NULL, NULL), B("Elitegroup", "P6IWP-Fe", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), @@ -733,6 +739,7 @@ const struct board_info boards_known[] = { B("GIGABYTE", "GA-MA790GP-DS4H", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL), B("GIGABYTE", "GA-MA790XT-UD4P (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL), B("GIGABYTE", "GA-P55A-UD4 (rev. 1.0)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL), + B("GIGABYTE", "GA-P67A-UD3P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", 1, NULL, NULL), B("HP", "e-Vectra P2706T", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), B("HP", "ProLiant DL145 G3", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c008…", NULL), @@ -799,9 +806,11 @@ const struct board_info boards_known[] = { B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), B("MSI", "MS-7640 (890FXA-GD70)",1, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL), B("MSI", "MS-7642 (890GXM-G65)", 1, "http://www.msi.com/product/mb/890GXM-G65.html", NULL), + B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), B("Nokia", "IP530", 1, NULL, NULL), + B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL), B("PCCHIPS ", "M863G (V5.1A)", 1, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryI…", NULL), B("PC Engines", "Alix.1c", 1, "http://pcengines.ch/alix1c.htm", NULL), B("PC Engines", "Alix.2c2", 1, "http://pcengines.ch/alix2c2.htm", NULL), @@ -884,6 +893,7 @@ const struct board_info boards_known[] = { B("VIA", "pc2500e", 1, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL), B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), + B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), #endif diff --git a/print_wiki.c b/print_wiki.c index c3ca1f4..57a27d8 100644 --- a/print_wiki.c +++ b/print_wiki.c @@ -70,7 +70,7 @@ static const char chip_th[] = "{\ ! align=\"center\" colspan=\"2\" | Voltage [V]\n\n\ |- bgcolor=\"#6699ff\"\n| colspan=\"4\" |  \n\ | Probe\n| Read\n| Erase\n| Write\n\ -| align=\"center\" | min \n| align=\"center\" | max\n\n"; +| align=\"center\" | Min \n| align=\"center\" | Max\n\n"; static const char programmer_section[] = "\ \n== Supported programmers ==\n\nThis is a list \ diff --git a/rayer_spi.c b/rayer_spi.c index 7f9270a..417fde9 100644 --- a/rayer_spi.c +++ b/rayer_spi.c @@ -42,7 +42,7 @@ enum rayer_type { /* We have two sets of pins, out and in. The numbers for both sets are * independent and are bitshift values, not real pin numbers. - * Default settings are for the the RayeR hardware. + * Default settings are for the RayeR hardware. */ /* Pins for master->slave direction */ static int rayer_cs_bit = 5; diff --git a/spi25.c b/spi25.c index 937ee5d..c9fe9ec 100644 --- a/spi25.c +++ b/spi25.c @@ -120,7 +120,6 @@ static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) uint32_t id2; if (spi_rdid(readarr, bytes)) { - msg_cdbg("\n"); return 0; } @@ -201,7 +200,6 @@ int probe_spi_rems(struct flashchip *flash) uint32_t id1, id2; if (spi_rems(readarr)) { - msg_cdbg("\n"); return 0; } @@ -259,7 +257,6 @@ int probe_spi_res1(struct flashchip *flash) } if (spi_res(readarr, 1)) { - msg_cdbg("\n"); return 0; } @@ -283,7 +280,6 @@ int probe_spi_res2(struct flashchip *flash) uint32_t id1, id2; if (spi_res(readarr, 2)) { - msg_cdbg("\n"); return 0; } -- 1.7.1

1 0

[PATCH] TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) support
by Uwe Hermann 14 Oct '11

14 Oct '11

See patch. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

[commit] r1451 - in trunk: . util
by repository service 14 Oct '11

14 Oct '11

Author: uwe Date: Fri Oct 14 22:33:14 2011 New Revision: 1451 URL: http://flashrom.org/trac/flashrom/changeset/1451 Log: TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) support. Thanks to TIAO/DIYGADGET for sponsoring a test device! This is an FTDI FT2232H based device which provides an easily accessible JTAG, SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips using flashrom. http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-seria… http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#S… There are two SPI connectors (pin headers) on the board: SPI1, which is connected to the FT2232H's A interface, and SPI2, which is connected to the chip's B interface. Both can be used to flash SPI chips: flashrom -p ft2232_spi:type=tumpa,port=A flashrom -p ft2232_spi:type=tumpa,port=B The default interface is A, so for SPI1 you can also just write: flashrom -p ft2232_spi:type=tumpa I tested all operations on both interfaces, everything works fine. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashrom.8 trunk/ft2232_spi.c trunk/util/z60_flashrom.rules Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Mon Sep 19 00:42:18 2011 (r1450) +++ trunk/flashrom.8 Fri Oct 14 22:33:14 2011 (r1451) @@ -199,7 +199,8 @@ based USB SPI programmer), including the DLP Design DLP-USB1232H, \ FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \ JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \ -Olimex ARM-USB-TINY/-H, and Olimex ARM-USB-OCD/-H." +Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, and TIAO/DIYGADGET USB +Multi-Protocol Adapter (TUMPA). .sp .BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \ including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \ @@ -441,7 +442,8 @@ .B model can be .BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \ -arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h +arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \ +", or " tumpa and .B interface can be Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Mon Sep 19 00:42:18 2011 (r1450) +++ trunk/ft2232_spi.c Fri Oct 14 22:33:14 2011 (r1451) @@ -29,9 +29,12 @@ #include "spi.h" #include <ftdi.h> +/* Please keep sorted by vendor ID, then device ID. */ + #define FTDI_VID 0x0403 #define FTDI_FT2232H_PID 0x6010 #define FTDI_FT4232H_PID 0x6011 +#define TIAO_TUMPA_PID 0x8a98 #define AMONTEC_JTAGKEY_PID 0xCFF8 #define FIC_VID 0x1457 @@ -46,6 +49,7 @@ const struct usbdev_status devs_ft2232spi[] = { {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, + {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"}, @@ -172,6 +176,10 @@ ft2232_interface = INTERFACE_A; cs_bits = 0x18; pindir = 0x1b; + } else if (!strcasecmp(arg, "tumpa")) { + /* Interface A is SPI1, B is SPI2. */ + ft2232_type = TIAO_TUMPA_PID; + ft2232_interface = INTERFACE_A; } else if (!strcasecmp(arg, "busblaster")) { /* In its default configuration it is a jtagkey clone */ ft2232_type = FTDI_FT2232H_PID; Modified: trunk/util/z60_flashrom.rules ============================================================================== --- trunk/util/z60_flashrom.rules Mon Sep 19 00:42:18 2011 (r1450) +++ trunk/util/z60_flashrom.rules Fri Oct 14 22:33:14 2011 (r1451) @@ -72,4 +72,8 @@ # http://olimex.com/dev/arm-usb-tiny-h.html ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="664", GROUP="plugdev" +# TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) +# http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-seria… +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="664", GROUP="plugdev" + LABEL="flashrom_rules_end"

1 0

Success report: MSI A75MA-G55 (MS-7696)
by Bill McGonigle 14 Oct '11

14 Oct '11

Thanks for flashrom! It enabled me to fix some problems I was having without buying a copy of Windows. Diagnostics for this board attached. Say, MSI BIOS updating is a mess. MSI provides a Windows-only tool, the users on their forum have made a bootable-USB builder (Windows-only) which installs a flash tool, and MSI endorses that, but the users say to never use the flash tool that MSI distributes. Worse yet, MSI no longer distributes flash images via their website - they want you to update with their Windows tool (apparently one can e-mail support for a copy of the flash images; I just grabbed a final beta from the forum as I had limited time). The forum-users' tool apparently (from screenshots) can also download the flash images from MSI (with versioning, so one can downgrade). Anyway, that's quite a bit of background to ask if it anybody has discussed adding vendor-specific handlers/plugins to qflashrom. If that's desirable the logic for MSI could probably be ported over from the Windows tool. The flashrom LiveCD would be tremendously useful for folks in the field with this sort of capability. -Bill -- Bill McGonigle, Owner BFC Computing, LLC http://bfccomputing.com/ Telephone: +1.855.SW.LIBRE Email, IM, VOIP: bill(a)bfccomputing.com VCard: http://bfccomputing.com/vcard/bill.vcf Social networks: bill_mcgonigle/bill.mcgonigle

2 1

Re: [flashrom] EON EN29F002NT-70P - Erase/Write OK
by Stefan Tauner 14 Oct '11

14 Oct '11

On Thu, 13 Oct 2011 15:13:00 -0300 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > Tested (via hot swap) using the PCCHIPS reported in my previous email. > > Marcos EON EN29F002(A)(N)T is marked as TEST_OK_PREW now, thanks -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] SyncMOS F29C51002T-90PC - Write OK
by Stefan Tauner 14 Oct '11

14 Oct '11

On Thu, 13 Oct 2011 15:07:40 -0300 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > Tested (via hot swap) using the PCCHIPS reported in my previous email. > > Marcos thanks, marked as TEST_OK_PREW now. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] PCCHIPS M598LMR (V9.0) - OK
by Stefan Tauner 14 Oct '11

14 Oct '11

On Thu, 13 Oct 2011 14:52:59 -0300 Marcos Felipe Rasia de Mello <marcosfrm(a)gmail.com> wrote: > PCCHIPS M598LMR boards were incredibly popular in Brazil ~12 years ago. > > There were, as usual from PCCHIPS, several hardware revisions. Some I > remeber are 1.3, 5.0, 6.0, and 9.0. The difference between them is not > very clear, but as a general rule the latest BIOS (2K1222S.ROM) > applies to all of them, with one exception: if it use an ASD AE29F2008 > or Winbond W29C020 flash, the 2K1222S.ROM BIOS will *not* work (the > board will not complete POST). In case you have one of those chips, > you should use the 2K0930S.ROM BIOS which works fine. > > Mine has an ASD AE29F2008-12 flash (detected as "Winbond > W29C020(C)/W29C022" by flashrom) and I successfully programmed the > 2K0930S.ROM BIOS. > > Logs attached. > > Marcos hello marcos and thanks for the report(s)! i have marked the board as supported and also the sis chipset to be tested. the (mis)detection of the flash chip is expected. the ASD chip uses the same ID (and is hopefully a drop-in replacement which behaves identically). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Spec for Lenovo n200 flash enable
by Joshua Roys 13 Oct '11

13 Oct '11

Hello, Please find attached a specification that when implemented should allow flash access on the Lenovo n200 laptop. Graceful EC restart was not investigated. As a side note, compal has a nice set of EC KBD commands that allow a program to query the EC type (ENE KB926, NSC PC87570, ...) that might eventually allow a generic compal laptop enable. More investigation needed. Joshua Roys

1 0

EON EN29F002NT-70P - Erase/Write OK
by Marcos Felipe Rasia de Mello 13 Oct '11

13 Oct '11

Tested (via hot swap) using the PCCHIPS reported in my previous email. Marcos

1 0

SyncMOS F29C51002T-90PC - Write OK
by Marcos Felipe Rasia de Mello 13 Oct '11

13 Oct '11

Tested (via hot swap) using the PCCHIPS reported in my previous email. Marcos

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom